Search Results

Search found 15591 results on 624 pages for 'problems'.

Page 437/624 | < Previous Page | 433 434 435 436 437 438 439 440 441 442 443 444  | Next Page >

• Windows 7 Blank Screen on Boot / Login

  - by Greg

  I have a new system that's having a few problems... sometimes (seems to be when the PC is cold, i.e. has been switched off for a while, though that could be my imagination) I get a blank blue screen when I boot up. The system boots normally and auto-logs-in. The desktop loads and I'm even able to launch applications, but then everything disappears and the screen goes to the default windows desktop blue colour (not the desktop image, just a plain blue with no mouse cursor). At this point the machine completely locks up - I'm unable to even toggle Num Lock and have to hold in the power button for 5 seconds to kill it. Interestingly if I manage to launch some applications before it goes blank, they will usually crash... sometimes explorer.exe will crash too. When I reboot, the system is fine and stable. I've installed the latest graphics drivers and run memtest86+ for 6 passes (and counting) with no errors. The system specs are: CPU: Intel I7 2.66 @ 3.4GHz RAM: 6GB (3 * 2GB DDR3) HDD: 128GB Crucial M225 SSD Motherboard: Gigabyte EX58-UD3R Gfx: ATI Radeon Sapphire 5870 1GB Note: There are a few similar questions but I haven't found one that matches my symptoms

  Read the article

• Outlook 2007 font sizes

  - by Flack

  Hello, Something really strange seems to have happened to my Outlook 2007. Everything was working fine for a long time now but at the end of today, all of a sudden, all of the fonts in Outlook are messed up. The font size of mails I write is huge (I am not zoomed in) and the font sizes of the buttons are big too, specifically the "Send", "To", and "Cc" buttons. I tried changing the font sizes through Outlook, but some of the buttons on the "Mail Format" tab in Options are not working, mainly the "Stationary and Fonts" button. I hit it but no window opens. This is all happening on my x64 machine. I took a look at my x32 machine, which also has Outlook 2007 installed and everything is ok there. Below is a link to an image comparing the broken, large font Outlook (top of picture) and the normal, working outlook. The text in the mails I compose is also abnormally large in the broken Outlook. Big font Outlook buttons. Any ideas? This came out of no where after a few months of no problems. Thanks.

  Read the article

• reverse proxy not rewriting to https

  - by polishpt

  I need your help. I'm having problems with reverse proxy rewriting to https: I have an alfresco app running on top of tomcat and as a front and an Apache server - it's site-enabled looks like that: <VirtualHost *:80> ServerName alfresco JkMount /* ajp13_worker <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature Off </VirtualHost> I also have a reverse proxy server running on second machine and i want it to rewrite queries to https. It's site-enabled looks like that: <VirtualHost 192.168.251.50:80> ServerName alfresco DocumentRoot /var/www/ RewriteEngine on RewriteRule (.*) https://alfresco/ [R] LogLevel warn ErrorLog /var/log/apache2/alfresco-80-error.log CustomLog /var/log/apache2/alfresco-80-access.log combined ServerSignature Off </VirtualHost> <VirtualHost 192.168.251.50:443> ServerName alfresco DocumentRoot /var/www/ SSLEngine On SSLProxyEngine On SSLCertificateFile /etc/ssl/certs/alfresco.pem SSLCertificateKeyFile /etc/ssl/private/alfresco.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /alfresco http://192.168.251.50:8080/alfresco ProxyPassReverse /alfresco http://192.168.251.50:8080/alfresco LogLevel warn ErrorLog /var/log/apache2/alfresco-443-error.log CustomLog /var/log/apache2/alfresco-443-access.log combined ServerSignature Off </VirtualHost> Now, ProxyPass works, when I go to alfresco/alfrsco in a browser application opens, but rewriting to https doesn't work. Plese help. Regards when I go to 192.168.251.50 Tomcat configuration page shows up. When I go to 192.268.251.50:8080 - the same as above when I go to 192.168.251.50:8080/alfresco - alfresco app page shows app when I go to alfresco/alfresco - same as above when i go to https://alfresco or https://alfresco i get an error connecting to a server

  Read the article

• How to set up a VPN Incoming connection with Windows to tunnel Internet traffic?

  - by Mehrdad

  I want to set up a VPN on a remote server to route all my Internet traffic for privacy reasons. I can set up an incoming connection and connect to it successfully. The problem is, I can just see the remote computer and no other Web sites will open. I want the remote server to act like a NAT. How can I do that? Note that I don't want to split Internet traffic. I actually want to send all the traffic to the remote server but need to make it relay the traffic. For the record, my remote server is Windows Web Server 2008 which does not have routing and remote access service. Clarification I'm mostly interested in server configuration. I don't have any problems configuring the client. By the way, Windows Web Server 2008 seems to have the same VPN features built in client OSes (like Vista) and specifically, it doesn't include the RRAS console in MMC. I'm also open to suggestions regarding third party PPTP/L2TP daemons available, if they are free.

  Read the article

• Regular issue with keys on temp tables

  - by Christian

  We run a large forum with lots of reads and writes, particularly to the posts and topics tables which are both innodb. Last week I started doing 12 hourly backups with innobackupex because mysqldump just takes forever (7+ million rows in posts table.) It seems that something doesn't like these backups because I have a recurring problem every other day. The symptoms; The front page of the site starts throwing errors The logs start showing errors like Error: 126 - Incorrect key file for table '/tmp/mysql/#sql_4e87_14.MYI'; try to repair it The /tmp/ dir fills up and we start getting Error: 1030 - Got error 28 from storage engine in the logs. The only way to fix is to optimize table on each of the posts and topics tables. I'm trying all I can to stop MySQL using disks for temp tables, but I'd have more problems than this if it used all my memory also. My my.cnf is here; https://gist.github.com/cbiggins/0aa26f6defb7a14541d7 The box has 32GB memory and I don't come near that usually. Currently at 15GB use. Thanks in advance. Update 1: Despite the conf looking like there is replication, there isn't. This is a stand alone instance.

  Read the article

• Hard drive had reallocated sectors...but now it magically doesn't! Can I trust it?

  - by rob

  Last week my SMART diagnostics utility, CrystalDiskInfo, reported that the external hard drive that I was saving my backups to had suddenly reported 900+ reallocated sectors. I double-checked to confirm, then ordered a replacement drive. I spent all of this week copying data from that drive to the new drive. But toward the end of the copy, something peculiar happened. CrystalDiskInfo popped up an alert that the reallocated sector count had gone back down to 0. I know that when SMART detects a read error on a block, it adds that block to the current pending reallocation list. If it subsequently is successfully written or read later, it is removed from the list and assumed to be fine, but if a subsequent write fails, it is marked bad and added to the reallocated sector count. What concerns me most is that I've never read anywhere that a sector can be recovered as "good" after it has been marked as a bad sector and remapped. I've just finished running an extended SMART diagnostic, and it found no surface errors. Now I'm doubtful that the manufacturer will honor a warranty claim if the SMART info does not report any problems. Has anyone had this happen? If so, then is the drive, indeed, okay, or should I be concerned about an imminent failure?

  Read the article

• What could be causing SVCHost to leak handles?

  - by Goz

  I have a problem that has been causing me all sorts of grief recently. SVCHost appears to be leaking resources all over the shop. This is the SVCHost run with the arguments "-k netsvcs". At the moment it is sitting at around 5,700 Handles being used. Before I rebooted the machine it was sitting at around 33,000 handles! This higher number has been causing me large problems as my software, thus, fails to obtain the handles it needs (The software tries to create around 2000 handles). I'm totally at a loss as to what is going wrong. IF anyone could help me stop this happening it would be much appreciated. I'm running on XP with SP3. Edit: I tracked this problem down to the WMI system. I'm not sure why or how the problem was occurring. Basically I used "sc change" to move it into its own process and suddenly everything seems to be fine. I'm not entirely sure what is going on ...

  Read the article

• Nginx + PHP5-FPM repeated cut outs 502

  - by James

  I've seen a number of questions here that highlight random 502 (Nginx + PHP-FPM = "Random" 502 Bad Gateway) and similar time outs when using Nginx + PHP-FPM. Even with all the questions, I'm still unable to find a solution. Using Ubuntu 10.10 + Nginx + PHP5-FPM + APC and every 1 out of 4 requests ends in a timeout and failure. This isn't a load issue or large traffic, it happens even in dev environment with one person. I am doing this across 3 1GB machines, each with the same configurations and same problems. fastcgi_params fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param REDIRECT_STATUS 200; /etc/php5/fpm/main.conf ; FPM Configuration ; ;include=/etc/php5/fpm/*.conf ; Global Options ; pid = /var/run/php5-fpm.pid error_log = /var/log/php5-fpm.log ;log_level = notice ;emergency_restart_threshold = 0 ;emergency_restart_interval = 0 ;process_control_timeout = 0 ;daemonize = yes ; Pool Definitions ; include=/etc/php5/fpm/pool.d/*.conf /etc/php5/fpm/pool.d/www.conf [www] listen = 127.0.0.1:9000 ;listen.backlog = -1 ;listen.allowed_clients = 127.0.0.1 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 user = www-data group = www-data ;pm.max_children = 50 pm.max_children = 15 ;pm.start_servers = 20 pm.min_spare_servers = 5 ;pm.max_spare_servers = 35 pm.max_spare_servers = 10 ;pm.max_requests = 500 ;pm.status_path = /status ;ping.path = /ping ;ping.response = pong request_terminate_timeout = 30 ;request_slowlog_timeout = 0 ;slowlog = /var/log/php-fpm.log.slow ;rlimit_files = 1024 ;rlimit_core = 0 ;chroot = chdir = /var/www ;catch_workers_output = yes

  Read the article

• DD-WRT (WRT54G) and (THOMSON TG782) how to put them togather?

  - by FeRtoll

  Ok so let me explain, i bought WRT54G and successfully installed DD-WRT v24-sp1 (07/26/08) mini-special - build 9994. That's all ok no problems with it all normal functioning. And just to add (i don't need wireless, wireless is turned off always) What i want: ISP's router (TG782) from it's INTERNET port(out) cable "which was before in my pc" is connected to WRT54G's INTERNET port and then from WRT54G LAN port 1 to my pc. The problem: How do i connect and setup all? I have tried many times on many different ways but cant get it to work IF THE CABLE FROM TG782 IS CONNECTED TO WRT54G ON INTERNET PORT. If i connect the TG782 to Lan port 1 on WRT54G and my pc to lan port 2 then all works fine after i setup gateway and all. But i want to connect TG782 to Internet port of WRT54G because i need "Access Restrictions" and this only goes through WAN right? please correct me if i am wrong. What i have tried: This is how i have tried to setup all. The TG782 router ip is 192.168.1.1 And WRT54G ip is 192.168.1.30 so in WRT54G control panel i have setup like this: ----WAN Connection Type---- Connection Type: Automatic Configuration - DHCP STP: Disabled ----Router IP---- Local IP Address: 192.168.1.30 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 (the TG782) ----Network Address Server Settings (DHCP)---- DHCP Type: DHCP Server Start IP Address: 192.168.1.100 Maximum DHCP Users: 6 And this wont work i probably miss something more, if anyone can help i would be thankfull. Also i have to note that i have tried to set my network adapter on pc to use the gateway of WRT54G and ip 192.168.1.102 In short: i cant get it to work normal only as a switch! Thanks for any help! -------EDIT:------- Here is an image which maybe can help: http://img27.imageshack.us/img27/4227/allin1w.jpg

  Read the article

• Exchange server intermittently not receiving or delivering emails to a few addresses?

  - by Gary Willoughby

  This is a strange problem. We are using an Exchange 2007 server to handle the emails to and from the company. There are two main problems which are probably related. None of our mails sent to one single customer are ever received. When we send any type of mail to one particular customer, they never get it. We have confirmed the address and tried to send more to other mail addresses on the same domain and they still don't receive it. No error (email or otherwise) is ever issued. (Domain related? Blacklisted?) Sometimes (intermittently) a mail sent to our company (can be any address on our domain) is never received. I tried this the other day from home and sent a mail to my work address. It was never received. But then a day later i sent another and it was received fine (so the mail address is fine). No error (email or otherwise) is ever issued. Any ideas where to start looking for causes?

  Read the article

• repair partition table

  - by m.sr

  Hallo. I've just overwritten my partition table of my system's hard disk. i made a cfdisk on the wrong device (/dev/sda instead of /dev/sdd), deleted all partitions, made one new primary spanning over the whole device, set its type to 07 (NTFS) and hit write. So here i am with my system running. Until i reboot, i hope/guess nothing will change - meaning: all my data is accessible (I'm currently making a dd-backup of the whole device and plan to make a .tar.gz-backup of the most important data later). I also backed up /proc/partitions, /proc/diskstats (even though i guess this is more about throughput and stuff like this ...) and /sys/block/sda/sda?/{start,size}. Some further things i know: 4 primary partitions 1st partition: ~100Mb, ext3, /boot 2nd partition: ~100Mb, "Win7 Boot Partition", ntfs(?) 3rd partition: ~20...30GB, Win7, ntfs 4th partition: ~20...30GB, luks-encrypted device The luks- de crypted device is a LVM-PV The /, /home & swap-partitions are all LVs on the (VG on the) above noted PV So my questions: What is the simplest way to just write the kernels partition table to the disk? What is the simplest way to take the above mentioned (and perhaps other I don't know of ...) data and generate the partition table? Are there any problems to take care of regarding to luks and/or lvm? Is there any data I should backup before rebooting (meanig stuff from kernel [ /sys/..., /proc/...] and so on, which could help me regenerate the partition table)? Thanks a lot! P.S.: debian sid, Kernel 2.6.34-1-amd64 from debian-experimental, 80GB Intel SSD

  Read the article

• Computer locking up, looking for bootable hardware diagnostic tool.

  - by Carl Menke

  Well today I helped my friend build a computer. All went pretty well until we got to installing Win7. Thing is, we thought, it was crashing constantly. I adjusted pretty much every setting in the BIOS and removed as much hardware as possible to try and prevent a crash. No dice. So far I've tried running an Ubuntu live cd without the harddrive installed. Nope, crashed on boot. And then I just tried Microsoft's ram utility disk and it eventually locked up on that (the ram passed though). So it seems to me like it's either the CPU (AMD PhenomII x3) or the motherboard that could be bad, but I don't know how to test them individually for problems. I thought it could be a overheating issue, but the BIOS reports that the CPU temp is fine idling around 34C. Any advice or diagnostic disk that could help me out? TL;DR: Computer locks up frequently during use (cannot even boot/install an operating system), memory is fine, probably CPU or Mobo, BIOS says CPU temps are fine. What should I try?

  Read the article

• CIFS mounted drive setting "stick-bit" on all files, cannot change permissions or modify files

  - by mattmcmanus

  I have a folder mounted on an Ubuntu 8.10 sever through cifs that I simply cannot change the permissions on once mounted. Here is a breakdown of what's going on: All files within the mounted folder automatically have their permissions set to -rwxrwSrwx regardless of whether the file is create on the windows server or on the linux machine. I have the same directory mounted on two other linux servers (both running 9.10 instead of 8.10) with no problems at all. They all are using the same fstab options and the same credentials. //server/folder /media/backups cifs credentials=/etc/samba/.arcadia_cred,noexec,noserverino 0 0 I've I run a chmod command a million different ways, all of which report successfully changing the permissions. However it doesn't. The issue began after I updated from 8.04 to 8.10 Any idea why this may be happening on one machine? Since it started after an upgrade I'm not sure what is the bes thing to do. Any help you could give would great! None of my automated backup scripts are working because of this!

  Read the article

• windows Home Server backup error

  - by domen

  I've finally built my WHS, but some other problems have showed up. I've googled, binged and searched SU with no success. The problem is following: at the moment I've got a Win7 laptop and Win7 PC, which should be backed up by the WHS. Laptop is backed up just fine with no issues, but when I try to manually backup the PC, after "backup is starting" message, when backup service should be monitoring changes on partitions, PC gets disconnected from the home network and thus, the backup process is stuck. Disabling/enabling network adapter gets PC back on the network. The only thing I've tried was reinstalling connector software. no success. Also, I've downloaded connector troubleshooter and only thing it says is "DHCP server was not found". I'm not good with networks, so I couldn't figure out what could that indicate (all computers in the network are assigned static IPs). Any ideas what the problem can be? I can provide any additional information, I'm just not sure what may be helpful right now. Thanks.

  Read the article

• Ubuntu 11.10 ATI Drivers vesa park

  - by Matthias

  This is probably not an issue, from all I can get it seems my hardware and drivers are properly installed. However when I go to system settings - system info - graphics. I get Driver: VESA:PARK. Experience: Standard. my graphics card is a: Ati Mobility Radeon HD 5470 512MB. I am pretty sure it's not a same-die GPU since there is a fan exhaust at the side of my laptop which I presume is the exhaust for the GPU... I have no clue whatsoever what this means. I installed the ati drivers first using the 'additional drivers' method. However I also decided to look a manual installation up via the terminal since I've had problems before with Ubuntu and ati cards. I used wget and something among the lines of sh dpkg -i. I can recall exactly, I took them from another stackoverflow answer. Anyway, it seems everything is installed properly since it shows up with these commands: sudo lshw -C video fglrxinfo however the first command seems to detect hardware, not the driver per se, although the driver is probably needed to detect the hardware anyway which would indicate its properly installed. I am still not sure about that VES:PARK thing though. I'd like to know what it means.. Also, if someone happens to know a good way of testing if the gpu is connected/being used...some sort of benchmark maybe...I'd like to hear it. P.s. I can find my way around in Ubuntu but I would probably still be considered a rookie by more experienced users.

  Read the article

• The RTL8111/8168B NIC under Linux and the r8168 driver

  - by nik

  So I've got one of the infamous R8168 Realtek ethernet NIC, which have some problems under Linux. After some research, I found out I had to use the r8168 driver for this card (and not the r8169 which still loads when nothing else is available), which I did. So now everything works fine... Sort of. My download and upload rates are more than halved compared to what I should get. When I test (with eg. speedtest) I get something like 20M (often 15M) in download and 30M in upload, but if I test under Windows (everything is otherwise identical: same ethernet cable, same connection, at the same time of the day (well 5 min apart)...), I get 50M upload/download (which is what I expect). Where can it come from? Here's some info: ~ # lspci [...] 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) ~ # modinfo r8168 filename: /lib/modules/3.2.1-gentoo-r2/net/r8168.ko version: 8.027.00-NAPI license: GPL description: RealTek RTL-8168 Gigabit Ethernet driver author: Realtek and the Linux r8168 crew <[email protected]> srcversion: 0A6E9F1D4E8E51DE4B6BEE3 alias: pci:v00001186d00004300sv00001186sd00004B10bc*sc*i* alias: pci:v000010ECd00008168sv*sd*bc*sc*i* depends: vermagic: 3.2.1-gentoo-r2 SMP mod_unload [...] ~ # mii-tool -v eth0: negotiated 100baseTx-HD, link ok product info: vendor 00:07:32, model 17 rev 4 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

  Read the article

• It takes a long time until Windows XP recognize I connected USB drive

  - by Pavol G

  I have a problem with my new USB disk. When I connect it to my laptop with Windows XP SP2 it takes about 4-5min until Windows recognizes it and shows it as a new disk. I can also see (disk's LED is blinking) that something is scanning the disk when I connect it; when this is done Windows immediately recognize it. Also when I'm copying data to this disk the speed is about 3.5MB/sec. It's connected using USB2.0. I tried to check for spyware (using Spybot), also tried running Windows in safe mode. But still have the same problems. Do you have any idea what could help to solve this problem? On Windows Vista (another laptop) everything is ok, disk loads in about 15sec and speed is about 20-30MB/sec. Edit: I tried to update to SP3 - no change Edit2: When this "strange" scanning occurs I can see that DPCs process is taking about 50% of CPU. When the scan ends (after 5min) this process take 0% again. Edit3: About the scan time, currently it's taking about 5min, but this time is growing as I'm adding more data to the disk, currently its about 40GB and I don't want to see how long it will take with 1000GB. Thanks a lot for every advice!

  Read the article

• Snow Leopard takes a long time to connect to Windows/Samba server

  - by hood

  We run a very heterogeneous network here: There is some XP, Vista, 7, Leopard, Snow Leopard clients, and Windows 2003 (one remaining legacy app), 2008, and Linux servers. The main file server runs Ubuntu Linux and has been added to the Windows Domain and has been used for many years; SBS 2008 is the PDC (the 2003 and 2008 are on the domain also). In Leopard there were no problems at all authenticating to the file servers. We've upgraded one of the Leopard iMacs to Snow Leopard, though the same problem occurs in a new MBP which came with the newer OS as well as a clean install on another iMac. It does not matter whether connected through wired or wireless. In the Finder when clicking on the server - whether on first boot or after it is connected - it will display "Connecting..." for up to a few minutes before either generally working (if username/password in keychain) or displaying "Connection Failed" - at which time clicking "Connect As" and typing in the username/password will take some more time and eventually work. Sometimes it will display "Connecting..." indefinitely. (I've left it as long as 15 minutes before trying something else) Accessing shares on the the 2003 and SBS servers have the problem (so I don't think it's a Samba server issue). The Server 2008 Standard is connecting instantly at the moment. Accessing the share through an alias/stacks doesn't have this problem. Leopard and Windows clients still have no problem. I've searched Google but hasn't yielded any working result. How do I get rid of this delay?

  Read the article

• Why are SMART error rates going down?

  - by Jeff Shattock

  I have a hard drive that's part of a Linux software raid5 array. SMART has reported that its multi_zone_error_rate was 0, then 1, then 3. So I figured I better start backing up more frequently and prepare to replace the drive. Now, today, the multi_zone_error_rate of that very same drive is back down to 1. It seems that 2 errors unhappened while I wasn't looking. I've also seen simliar behaviour by inspecting the syslog on the server. Jun 7 21:01:17 FS1 smartd[25593]: Device: /dev/sdc, SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Jun 7 21:01:17 FS1 smartd[25593]: Device: /dev/sde, SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Jun 7 21:01:18 FS1 smartd[25593]: Device: /dev/sdg, SMART Usage Attribute: 7 Seek_Error_Rate changed from 200 to 100 Jun 8 02:31:18 FS1 smartd[25593]: Device: /dev/sdg, SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 Jun 8 03:01:17 FS1 smartd[25593]: Device: /dev/sdc, SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 Jun 8 03:01:17 FS1 smartd[25593]: Device: /dev/sde, SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200 These are raw values, not the human-useful values that smartctl -a produces, but the behaviour is similar: error rates changing, then undoing the change. None of these are the drive that had the multi_zone weirdness. I haven't seen any problems from the RAID; its most recent scrub ( < 24 hours ago) came back totally clean. The only thing I can think of is that the SMART reporting circuitry on the drive isn't working properly all the time. The cables are in tight on the drive and board. What's going on here?

  Read the article

• arp requests are sent continuously and my linux machine disconnected to the world

  - by sees

  I have the following problem and really need your help I'm implementing a small server to receive request from client on port 18999(just sample) using TCP socket. When I tested my server by using a lot of requests from a tablet through a router, I got the ARP problem(?) My net work just like: TABLET <------- WIRELESS ROUTER <------- MY SERVER (LINUX) Problems: 1. Can not connect to my Linux any more ( telnet, ping v.v...unreachable) 2. I use serial cable to connect to my Linux machine and use Wiresharp (from Windows) to catch the send message from Linux. It says that Linux keeps sending out continuously every 3 seconds ARP messages like the following: xx:xx:99:77:ff:69 ff:ff:ff:ff:ff:ff ARP 60 Who has 192.168.10.2? Tell 192.168.10.3 In the above message: xx:xx:99:77:ff:69 my Linux MAC address 192.168.10.2 my Tablet address 192.168.10.3 my Linux IP address Can you help me figure out the problem? Or tell me the way to detect the problem and reset the network back to normal (maybe restart Linux but I want to detect problem and restart automatically) UPDATE: 1. The above network works normally if tablet sends messages to my LINUX in normal speed (but also down after 48 hours) 2. The router works again after I unplugged my Linux ethernet cable (RJ45) from router. 3. The wireless network still works ( I can browser the router page from tablet) 4. When I use: ifconfig down then ifconfig up , the Linux restarts (?????????)

  Read the article

• Dante (SOCKS server) not working

  - by gregmac

  I'm trying to set up a SOCKS proxy using dante for testing purposes. However, I can't even get it to work with a web browser, after looking at several tutorials on how to do that. I've tried in both IE and Firefox, in both cases, using "Manual proxy configuration", leave everything blank except for SOCKS host, and then put in the IP of my proxy and the port number (1080). I just get "Server not found" / "Problems loading this page" and don't see anything in danted, even running in debug mode. If I do a "telnet 10.0.0.40 1080" I do see the connection open in danted debug output, so I know that much is working. Here's my config: logoutput: stdout /var/log/danted/danted.log internal: eth0 port = 1080 external: eth0 method: username none #rfc931 user.privileged: proxy user.notprivileged: nobody user.libwrap: nobody connecttimeout: 30 # on a lan, this should be enough if method is "none". client pass { from: 10.0.0.0/8 port 1-65535 to: 0.0.0.0/0 } client pass { from: 127.0.0.0/8 port 1-65535 to: 0.0.0.0/0 } client block { from: 0.0.0.0/0 to: 0.0.0.0/0 log: connect error } block { from: 0.0.0.0/0 to: 127.0.0.0/8 log: connect error } pass { from: 10.0.0.0/8 to: 0.0.0.0/0 protocol: tcp udp } pass { from: 127.0.0.0/8 to: 0.0.0.0/0 protocol: tcp udp } block { from: 0.0.0.0/0 to: 0.0.0.0/0 log: connect error } I'm sure I'm probably missing something simple, but I'm lost. I haven't even thought about SOCKS since the late 90's.

  Read the article

• Router to WIFI Client to Router (New solution for distance when repeater doesnt help)

  - by Kangarooo

  Ethernet to TL-WR340G with WIFI enabled Using TL-WA500 tried repeater mode which was not good enough and had password problems (could not connect if using either ASCII or Normal password in one way then in repeater worked other way) and also could not forward (repeat) WPA/WPA2 security. So since this repeater can also be as client, I made it as client and used another router (TL-WR740N) to get from wire connection from that client and all was working for a little bit. Every machine is set up to be auto DHCP. 1st when setting up client mode I found it working after doing reset. Then after some tens of minutes internet stopped working. When I removed WiFi client then all went back to normal. Where is the problem and how to make this work? Ethernet- TL-WR340G(AutoDHCP) ==> wifi ==> TL-WA500 TL-WA500 wifi client mode(AutoDHCP) ==> wire ==> TL-WR740N TL-WR740N router mode (AutoDHCP) ==> My Computer In other words: TL-WR340G ) ) ) ) TL-WA500 ===== TL-WR740N ==== PC1 ) ) WiFi === Wire

  Read the article

• What are "Excess Fragments" in defragmenting a hard drive?

  - by Andrew Swift

  I'm defragmenting my hard drive (XP SP3) with PerfectDisk 7.0, and it finds 816,659 excess fragments when I ask for an analysis. [update] Specifically, it shows that the 1TB disk is 14% fragmented with 19693 fragments and 816,659 excess fragments. About 20% of the disk is still free space. What does excess fragments refer to? What is the difference between fragments and excess fragments? I have had problems in the past where I defragmented a fragmented disk and many files were corrupted. It seemed as though "excess fragments" referred to orphan pieces, where the program couldn't find out where to put them. If that was true, then defragmenting a disk resulted in many incomplete files, and in fact I defragmented a disk full of MP3's and got a lot of corrupted files as a result. Instead, I started to simply format a separate disk and copy everything from one to the other. That way there were no orphan bits, and no file corruption. Does anybody know what "excess fragments" really are?

  Read the article

• Updating a backup image (.wim and/or Acronis .tib)

  - by Backdraft

  Anyways, I've got a Windows 7 installation that I want to make a generalized backup image of so I can use it for future installs on not only my desktop from which the image is to be derived from, but also other systems with dissimilar hardware. Therefore I've arrived at either 2 options, using either sysprep/imagx from WAIK (guide here), or the simpler Acronis True Image w/ their Universal Restore addon. Of course, they create distinct image file types, .wim and .tib respectively. What I'd like to do is to periodically update this image, say with Windows Updates, by booting it to either a physical partition or using virtualization (VirtualBox/VMWare), perform the updates, and save the updated .wim or .tib image file again. What's the simplest way I could do this? Another question is, I created this generalized backup image on a 500GB Seagate 7200RPM HDD. Say I get an SSD as an OS drive in the future, can I just deploy this backup image to the SSD normally, or are there any potential problems to be aware/avoid (ie. is it best to completely reinstall the OS on the SSD from scratch, or can I use the image created on the normal HDD with no issue)? Thanks and Happy Holidays.

  Read the article

• Missing boot files in Windows 8

  - by Alex F. Sherman

  I had a partition with Windows 8 Release Preview, Windows' System Reserved partition and the empty space of the beginning of disk. I moved two partitions to the beginning of disk using Ubuntu Live CD and GParted. After that, the Windows Loader didn't boot and throw an error about missing files. I fixed it using the commands: bootsect /nt60 sys /force /mbr bootrec /rebuildbcd bootrec /fixboot bootrec /fixmbr When I used "Automatic repair" option from "Advanced boot" menu, it throw an error like: Windows can't fix your boot problems. For more information see file C:\Windows\System32\LogFiles\Srt\SrtTrail.txt In this file I found a description of the system repair actions and at the end of file: Boot status indicates that the OS booted successfully. Now, when I use the Advanced boot menu from Windows 8 (PC settings - General - Advanced startup) I receive an error: Restart your PC to try again. It looks like something didn't load correctly. Restarting might fix the problem. If this happens more than once, you might also be able to find help by searching online for the specific error code. Erorr code: 0x8007090. 0x80070490 is the error code ERROR_NOT_FOUND. What are the missing boot files and how can I restore them? List of files in System Reserved Partition: B:\bootmgr B:\BOOTNXT B:\Boot\BCD B:\Boot\BCD.LOG B:\Boot\BCD.LOG1 B:\Boot\BCD.LOG2 B:\Boot\BOOTSTAT.DAT B:\Boot\Fonts B:\Boot\memtest.exe B:\Boot\qps-ploc B:\Boot\Resources B:\Boot\Resources\bootres.dll and many *.mui and *.ttf files.

  Read the article

< Previous Page | 433 434 435 436 437 438 439 440 441 442 443 444  | Next Page >