Search Results

Search found 21662 results on 867 pages for 'may kadoodi'.

Page 439/867 | < Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >

• Just how slow should my VPN be?

  - by David Heggie

  I have a VPN setup between a remote office with 2 ADSL connections (8Mb downstream, 512Kb upstream) and a main office with a 10Mb EFM connection (10Mb both up and down). The VPN is an IPSec connection using a DrayTek 2930 router for the ADSL and a DrayTek 3200 router at the EFM end. However, I'm unable to get speeds over this connection (tested with iperf) of anything over 600Kb or so down from the main office (traffic will pretty much always be from the main office to the remote office) Whilst I realise that there is an overhead and I'm never going to get the "full" bandwidth available over this VPN, I'd like to think that there's something I should be looking at that may help improve it. I've tried using the DrayTek's built-in "VPN Trunking" features which are supposed to load-balance connections, but this doesn't seem to improve matters much. I guess my question is - is this the kind of performance I should expect from this kind of setup and I'll just have to live with it, or should I be able to squeeze something more out of it through some VPN magic?

  Read the article

• "Misaligned partition" - Should I do repartition (how?)

  - by RndmUbuntuAmateur

  Tried to install Ubuntu 12.04 from USB-stick alongside the existing Win7 OS 64bit, and now I'm not sure if install was completely successful: Disk Utility tool claims that the Extended partition (which contains Ubuntu partition and Swap) is "misaligned" and recommends repartition. What should I do, and if should I do this repartition, how to do it (especially if I would like not to lose the data on Win7 partition)? Background info: A considerably new Thinkpad laptop (UEFI BIOS, if that matters). Before install there were already a "SYSTEM_DRV" partition, the main Windows partition and a Lenovo recovery partition (all NTFS). Now the table looks like this: SYSTEM_DRV (sda1), Windows (sda2), Extended (sda4) (which contains Linux (sda5; ext4) and Swap (sda6)) and Recovery (sda3). Disk Utility Tool gives a message as follows when I select Ext: "The partition is misaligned by 1024 bytes. This may result in very poor performance. Repartitioning is suggested." There were couple of problems during the install, which I describe below, in the case they happen to be relevant. Installer claimed that it recognized existing OS'es fine, so I checked the corresponding option during the install. Next, when it asked me how to allocate the disk space, the first weird thing happened: the installer give me a graphical "slide" allocate disk space for pre-existing Win7 OS and new Ubuntu... but it did not inform me which partition would be for Ubuntu and which for Windows. ..well, I decided to go with the setting installer proposed. (not sure if this is relevant, but I guess I'd better mention it anyway - the previous partition tools have been more self-explanatory...) After the install (which reported no errors), GRUB/Ubuntu refused to boot. Luckily this problem was quite straightforwardly resolved with live-Ubuntu-USB and Boot-Repair ("Recommended repair" worked just fine). After all this hassle I decided to check the partition table "just to be sure"- and the disk utility gives the warning message I described.

  Read the article

• Improved Customer Experience, but at what Cost? See the DELL Computer experience with RTD

  - by Richard Lefebvre

  We can all probably agree that improving your customers' experience is a good thing. But a key question many people are asking is will it help your organization and, in particular, what are the financial benefits? That's a good question, especially when companies ARE experiencing phenomenal return on investment (ROI). Of course, there are many factors that impact ROI or other measures of success, but we'd like to share some success stories as examples of customer experience in action and delivering positive results. If you would like to learn more about the economics of customer experience, see Brian Curran's presentation at the Oracle Customer Experience Summit last month. In this series of blog posts, we'll share actual customer stories. Today's example is Dell, which uses Oracle Real-Time Decisions (RTD) and Siebel CRM as part of their customer experience portfolio to better understand their customers' needs and wants and provide consistent interactions. Regular readers of this blog are probably familiar with Siebel, but RTD may be new to many of you. RTD is a complete decision management solution that delivers real-time decisions and recommendations and automatically renders decisions within a business process to create tailored messaging for every customer interaction. What does that mean? In the video below, Dell describes how customer experience is important not just for one interaction channel, but across all "vehicles." RTD is helping Dell understand customer behavior and communicate with the customer in a more relevant manner, across all communication  or interaction channels including sales and service call centers, email marketing and online. Dell continues to expand use of RTD because the benefits are showing up in sales, service and marketing results including 19% increase in close rates, faster issue resolution and 40% improvement in revenue per click in email marketing. Video link By Tony Berk on Nov 15, 2012

  Read the article

• a flexible data structure for geometries

  - by AkiRoss

  What data structure would you use to represent meshes that are to be altered (e.g. adding or removing new faces, vertices and edges), and that have to be "studied" in different ways (e.g. finding all the triangles intersecting a certain ray, or finding all the triangles "visible" from a given point in the space)? I need to consider multiple aspects of the mesh: their geometry, their topology and spatial information. The meshes are rather big, say 500k triangles, so I am going to use the GPU when computations are heavy. I tried using arrays with vertices and arrays with indices, but I do not love adding and removing vertices from them. Also, using arrays totally ignore spatial and topological information, which I may need studying the mesh. So, I thought about using custom double-linked list data structures, but I believe doing so will require me to copy the data to array buffers before going on the GPU. I also thought about using BST, but not sure it fits. Any help is appreciated. If I have been too fuzzy and you require other information feel free to ask.

  Read the article

• Backing up data (including mysqldumps) to S3

  - by seengee

  We have a web app on a number of servers and we want to add an additional layer of redundancy by backing up the key data to S3. The key data is the MySQL database and a folder containing dynamically created site assets - predominantly images. Some kind of rsync based solution would initially seem the best plan. A couple of years ago we played with S3cmd (in particular s3cmd sync) with some success but we didn't find it particularly reliable although this may have changed since. Its occurred to me though that a rsync solution might not work particularly well with a single db.sql file created with mysqldump and I assume this means the whole database getting transferred each time, with multiple databases of over 1GB this is going to add up to a lot of traffic (and $s) very quickly. With the image files I could simply just transfer files modified within the last day which would be far more simple. What approach should I look at?

  Read the article

• What is the recommended way to empty a SSD?

  - by Lekensteyn

  I've just received my new SSD since the old one died. This Intel 320 SSD supports TRIM. For testing purposes, my dealer put malware, err, Windows on it. I want to get rid of it and install Kubuntu on it. It does not have to be a "secure wipe", I just need the empty the disk in the mosy healthy way. I believe that dd if=/dev/zero of=/dev/sda just fills the blocks with zeroes and thereby taking another write (correct me if I'm wrong). I've seen the answer How to enable TRIM, but it looks like it's suited for clearing empty blocks, not wiping the disk. hdparm seems to be the program to do it, but I'm not sure if it clears the disk OR cleans empty blocks. From its manual page: --trim-sector-ranges For Solid State Drives (SSDs). EXCEPTIONALLY DANGEROUS. DO NOT USE THIS OPTION!! Tells the drive firmware to discard unneeded data sectors, destroying any data that may have been present within them. This makes those sectors available for immediate use by the firmware's garbage collection mechanism, to improve scheduling for wear-leveling of the flash media. This option expects one or more sector range pairs immediately after the option: an LBA starting address, a colon, and a sector count, with no intervening spaces. EXCEPTIONALLY DANGEROUS. DO NOT USE THIS OPTION!! E.g. hdparm --trim-sector-ranges 1000:4 7894:16 /dev/sdz How can I make all blocks appear as empty using TRIM?

  Read the article

• How can I set up an FTP user with a home directory inside another user's home folder?

  - by simon180

  Hi I have an Ubuntu (Hardy) server which I am using to host multiple websites. All of the sites are stored in subfolders of a public_html folder for my main login to the server and accessed via a single SSH account. I now have a website user who wants FTP (or similar) access to enable them to upload various files etc to the directory where their website is situated, however I still need the SSH account to have access to this directory as I may need to make changes using my master account. Basically I want to create an FTP account (I have VSFTPD installed) for a user with the home directory inside my own user account but they should only be able to read/write to this folder or its subfolders but not go further up the directory tree. How can I achieve this? Thanks

  Read the article

• What patterns book for iOS development contains this specific information? [closed]

  - by Brett Ryan

  I've read several books on iOS development and Objective-C, however what a lot of them teach is how to work with interfaces and all contain the model inside the view controller, i.e. a UITableViewController based view will simply have an NSArray as it's model. I'm interested in what the best practices are for designing the structure of an application. Specifically I'm interested in best practices for the following: How to separate a model from the view controller. I think I know how to do this by simply replacing the NSArray style example with a specific model object, however what I do not know how to do is alert the view when the model changes. For example in .NET I would solve this by conforming to INotifyPropertyChanged and databinding, and similarly with Java I would use PropertyChangeListener. How to create a service model for my domain objects. For example I want to learn the best way to create a service for a hypothetical Widget object to manage an internal DB and also services for communicating with remote endpoints. I need to learn the best ways to do this in a way that interface components can subscribe to events such as widgetUpdated. These services should be singleton classes and some how dependency injected into model/controller objects. Books I've read so far are: Programming in Objective-C (4th Edition) Beginning iOS 5 Development: Exploring the iOS SDK The iOS 5 Developer's Cookbook: Expanded Electronic Edition: Essentials and Advanced Recipes for iOS Programmers Learn Objective-C on the Mac: For OS X and iOS I've also purchased the following updated books but not yet read them. The Core iOS 6 Developer's Cookbook (4th edition Programming in Objective-C (5th Edition) I come from a Java and C# background with 15 years experience, I understand that many of the ways I would do things in these languages may not fit to the ObjC way of developing applications. Would someone be able to provide me with the book on this topic containing this specific subject matter?

  Read the article

• Ubuntu 12.04 Very slow especially with Android Studio

  - by Dew

  I have an old laptop with the following specification: Memory: 485 MiB, Processor: Genuine intel CPU T2300 @ 1.66 GHz ×2, OS Type: 32 bit, Disk: 78.1 GB, I installed on it Ubuntu 12.04 LTS and I noticed that the overall system is very slow in responding. I tried to search about that in the internet and I found some articles talking about how to make Ubuntu 12.04 LTS run fast I applied all what they said including download LXDE desktop environment and then nothing different in the system response time. Then I need to develop some android applications so, I download Android Studio (Beta) 0.8.6. The problem became worse than before whenever I tried to open the Android Studio the screen is frozen for some minutes then it took time to download the projects and initialize the work space also, when I tried to move the cursor he is move very slowly. When I tried to run my first application on the AVD it took three hours and still not run yet. I delete the Android Studio and install it again several times, I was trying to solve the problem but still nothing change. Please if you have any suggestions that may help me make my laptop and Android Studio work faster I will appreciate it for you. Thank you in advance.

  Read the article

• Who should own exim4 under debian?

  - by raindog308

  Installed debian from DVD. And now I see exim4 is running owned by UID 107. There is no user 107 in my /etc/passwd. Same problem on another system (owned by UID 101), so I suspect this is a debian problem...? Running squeeze on both. So under debian, who should own the mail system? This is what I have installed: # dpkg -l | grep exim ii exim4 4.72-6+squeeze2 metapackage to ease Exim MTA (v4) installation ii exim4-base 4.72-6+squeeze2 support files for all Exim MTA (v4) packages ii exim4-config 4.72-6+squeeze2 configuration for the Exim MTA (v4) ii exim4-daemon-light 4.72-6+squeeze2 lightweight Exim MTA (v4) daemon The binary itself is owned by root: -rwsr-xr-x 1 root root 758852 May 12 2011 /usr/sbin/exim4

  Read the article

• Mobile development, recommended computer configuration?

  - by MikaelW

  Hi, For the last 4 weeks, I have been trying to get into mobile development. Done a couple of tutorials, read some books, developed a couple of dummy Android apps. The thing is my computer is a 5 years old laptop, it is slow and time has come to replace it and I’m looking at different offers online. Have you got any recommendations? Is there any must-have that should make my developer life easier in the future? Is there anything specific that may be useful at a more advanced stage of development that I just can’t think of right now on the hardware side? (I mean apart from good proc, lots of RAM, many USB ports...) One thing I can think of is to have three OS on the same workstation: Windows, Unix and MacOS (so far I focused on android/java/eclipse but am interested in Iphone/objC/xcode as well) but that’s more on the software side. Anyway, would be grateful for any recommendations. Thanks in advance! Mikael PS: I’m quite free on the budget side of things PPS: I'm aware it's not really a programming question but will still be of interest to some programmers here.

  Read the article

• Is Moving Entity Framework objects over a webservice really the best way?

  - by aceinthehole

  I've inherited a .NET project that has close to 2 thousand clients out in the field that need to push data periodically up to a central repository. The clients wake up and attempt to push the data up via a series of WCF webservices where they are passing each entity framework entity as parameter. Once the service receives this object, it preforms some business logic on the data, and then turns around and sticks it in it's own database that mirrors the database on the client machines. The trick is, is that this data is being transmitted over a metered connection, which is very expensive. So optimizing the data is a serious priority. Now, we are using a custom encoder that compresses the data (and decompresses it on the other end) while it is being transmitted, and this is reducing the data footprint. However, the amount of data that the clients are using, seem ridiculously large, given the amount of information that is actually being transmitted. It seems me that entity framework itself may be to blame. I'm suspecting that the objects are very large when serialized to be sent over wire, with a lot context information and who knows what else, when what we really need is just the 'new' inserts. Is using the entity framework and WCF services as we have done so far the correct way, architecturally, of approaching this n-tiered, asynchronous, push only problem? Or is there a different approach, that could optimize the data use?

  Read the article

• Cry Engine 3 vs UDK

  - by Daniele Riccardelli

  I'm new here and I hope that other people may find this question interesting. Me and a bunch of guys from my University are thinking about getting started in game development, but, even though the game design is kind of ready, we are stucked at the point "which Engine should we choose". At first, we were thinking about Unity3D Free, in particular because we are pretty familiar with C# and, even better, it's completely free, but on the other hand there are some cons like no dynamic shadowing that make the realization of our game kinda hard. So, we are thinking about moving either to UDK or Cry Engine, since they are not as expensive as Unity3D Pro (at least before the game deployment) . The thing we are worried the most, though, is that we are kind of scared about the support for team work(i mean, that we might find it hard to coordinate our efforts without software support), since in Unity3D the team features are part of purchasable content, and we are not interested in paying that much for a project we are not even sure we can complete. So, finally, I hope one of you knows the mentioned engines enough to give us a tip telling which one offers better team features and is advisable for guys that have barely worked before on videogames but have good object oriented programming skills. Probably might be helpful for your suggestion, if i say that our game is an exploration game. Thanks to anybody who's going to answer.

  Read the article

• Should I care about Junit redundancy when using setUp() with @Before annotation?

  - by c_maker

  Even though developers have switched from junit 3.x to 4.x I still see the following 99% of the time: @Before public void setUp(){/*some setup code*/} @After public void tearDown(){/*some clean up code*/} Just to clarify my point... in Junit 4.x, when the runners are set up correctly, the framework will pick up the @Before and @After annotations no matter the method name. So why do developers keep using the same conventional junit 3.x names? Is there any harm keeping the old names while also using the annotations (other than it makes me feel like devs do not know how this really works and just in case, use the same name AND annotate as well)? Is there any harm in changing the names to something maybe more meaningful, like eachTestMethod() (which looks great with @Before since it reads 'before each test method') or initializeEachTestMethod()? What do you do and why? I know this is a tiny thing (and may probably be even unimportant to some), but it is always in the back of my mind when I write a test and see this. I want to either follow this pattern or not but I want to know why I am doing it and not just because 99% of my fellow developers do it as well.

  Read the article

• Returning Shapes to Default in Excel

  - by Craig

  Hi, I have around 70 shapes in a planning document i use for work, everything is fine but i am trying to add a new feature. These shapes are changed using edit points each week to show up on a map, but sometimes shape "A" may not get used in which i just want to turn it back to a default size along with all the other shapes. Does anyone know how i could achieve this via a Macro, i have tried lots of things and searched everywhere but i am at my wits end... If a shape is not default, set all non default shapes to default size. Thanks in advance

  Read the article

• Ubuntu 12.04 LTX Install Problems (See post for system build details.)

  - by Lokitez

  This is my first ever attempt at working with Ubuntu. I have only ever installed Windows in the past and that may be the problem. I purchased all new hardware this week and I would really like to give Ubuntu a chance (especially since I don't want to buy another Windows license). First, the hardware: AMD FX-8150 Zambezi 3.6GHz Socket AM3+ 125W Eight-Core Desktop Processor ASUS Crosshair V Formula AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Gaming Motherboard SAMSUNG 830 Series MZ-7PC128D/AM 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) - This is my intended boot drive. Western Digital VelociRaptor WD5000HHTZ 500GB 10000 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive - This is a backup drive that I have installed Windows Vista on until I can get Ubuntu to work. G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 I have downloaded and tried to install both Ubuntu 64 bit and Kubuntu 64 bit (both 12.04). Both will always fail to copy a file during install or otherwise lockup during install to the SSD. I have burned two copies of the Ubuntu 12.04 and had the install fail with both. I have installed Vista onto the HDD. Is it possible to mount the Ubuntu file into

  Read the article

• How are file permissions applied for shared drives?

  - by sleske

  I have two computers: A (running Windows Vista) B (running XP). I shared C: on computer A (as \\A\C ), and require a username (X) plus pw to access it. If I browse the the share \A\C on computer B, after entering username+pw I can access most folders, but one folder "\\A\C\F" gives me "permission denied". I looked at that folder's permissions on A, and it has full access permissons for all "Administrators". I use the account "A\X" to authenticate when accessing the share on A. X is a user account (on A) that is an "Administrator" according to Window's user management. Still, I cannot access this folder. If I explicitly add the "X" account to the accounts that may access folder F (under Properties / Security), I can access it without problems. I do not understand why I need to explicitly grant permission for X to get access to F. Is it not enough that X is an Administrator account?

  Read the article

• Storage drives is causting system crash

  - by Chad

  I'm running Centos 5.4 with 750GB(ntfs) and 2TB drives for storage. Originally I installed the 750, everything seemed fine and then I installed the 2TB drive with NTFS already partitioned. I noticed when I would copy a lot of videos it would crash (no mouse or response from server) about 20min into it. After doing some troubleshooting I noticed the 750 would also crash when doing the same task so I decided that NTFS may be the problem. I unmounted the 2TB drive and tried to partition and format it using ext2 but when using parted it would crash at this point "writing inode tables". Looking at the dmesg logs I believe this is the error "mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining". Any idea as to what could be causing this?

  Read the article

• How to automount NTFS usb sticks on Xubuntu 12.10?

  - by netimen

  I'm running the Xubuntu 12.10 on a Lenovo T520 laptop. If I plug a FAT formatted usb stick, it's mounted automatically, but if I plug in a NTFS formatted one, I have to mount it manually. How to make NTFS usb sticks to mount automatically when plugged? My /etc/fstab in case it helps: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=cd221c3e-44a8-459e-9dfb-04787f1cd0b6 none swap sw

  Read the article

• Are there any good examples of open source C# projects with a large number of refactorings?

  - by Arjen Kruithof

  I'm doing research into software evolution and C#/.NET, specifically on identifying refactorings from changesets, so I'm looking for a suitable (XP-like) project that may serve as a test subject for extracting refactorings from version control history. Which open source C# projects have undergone large (number of) refactorings? Criteria A suitable project has its change history publicly available, has compilable code at most commits and at least several refactorings applied in the past. It does not have to be well-known, and the code quality or number of bugs is irrelevant. Preferably the code is in a Git or SVN repository. The result of this research will be a tool that automatically creates informative, concise comments for a changeset. This should improve on the common development practice of just not leaving any comments at all. EDIT: As Peter argues, ideally all commit comments would be teleological (goal-oriented). Practically, if a comment is made at all it is often descriptive, merely a summary of the changes. Sadly we're a long way from automatically inferring developer intentions!

  Read the article

• How to avoid jumping to a solution when under pressure? [closed]

  - by GlenPeterson

  When under a particularly strict programming deadline (like an hour), if I panic at all, my tendency is to jump into coding without a real plan and hope I figure it out as I go along. Given enough time, this can work, but in an interview it's been pretty unsuccessful, if not downright counter-productive. I'm not always comfortable sitting there thinking while the clock ticks away. Is there a checklist or are there techniques to recognize when you understand the problem well enough to start coding? Maybe don't touch the keyboard for the first 5-10 minutes of the problem? At what point do you give up and code a brute-force solution with the hope of reasoning out a better solution later? When is it most productive to think and design more vs. code some experiments to and figure out the design later? Here is a list of techniques for taking a math test and another for taking an oral exam. Is there is a similar list of techniques for handling a programming problem under pressure? ANSWERS: I think this is a valid answer: How To Solve It. I found the link as an answer to Steps to solve or approach towards a solution. There were also some really good tips at Is thinking out loud during an interview really the best strategy?. A great and concise argument for TDD is the first answer to TDD Writing code vs Figuring out the answer to a problem?. My question may be a near-duplicate of that one.

  Read the article

• When NOT to use a framework

  - by Chris

  Today, one can find a framework for just about any language, to suit just about any project. Most modern frameworks are fairly robust (generally speaking), with hour upon hour of testing, peer reviewed code, and great extensibility. However, I think there is a downside to ANY framework in that programmers, as a community, may become so reliant upon their chosen frameworks that they no longer understand the underlying workings, or in the case of newer programmers, never learn the underlying workings to begin with. It is easy to become specialized to a degree that you are no longer a 'PHP programmer' (for example), but a "Drupal programmer", to the exclusion of anything else. Who cares, right? We have the framework! We don't need to know how to "do it by hand"! Right? The result of this loss of basic skills (sometimes to the extent that programmers who don't use frameworks are viewed as "outdated") is that it becomes common practice to use a framework where it is not required or appropriate. The features the framework facilitates wind up confused with what the base language is capable of. Developers start using frameworks to accomplish even the most basic of tasks, so that what once was considered a rudimentary process now involves large libraries with their own quirks, bugs, and dependencies. What was once accomplished in 20 lines is now accomplished by including a 20,000 line framework AND writing 20 lines to use the framework. Conversely, one does not want to reinvent the wheel. If I'm writing code to accomplish some basic, common little task, I might feel like I am wasting my time when I know that framework XYZ offers all the features I am after, and a whole lot more. The "whole lot more" part still has me worried, but it doesn't seem that many even consider it anymore. There has to be a good metric to determine when it is appropriate to use a framework. What do you consider the threshold to be, how do you decide when to use a framework, or, when not.

  Read the article

• How to make backlight work on Acer 5732z?

  - by Dude Random21

  I want to run 12.04 on my Acer Aspire 5732z. I know from research that these computers have issues with the backlight on Ubuntu. So I tried a couple of solutions: The sudo lightdm restart method. I get no change at all. The sudo setpci -s 00:02.0 F4.B=30 method. This so far has been the most effective. I first tried it in the F1 console, right away I get the screen back, problem is going back to the desktop it goes back to being black. So I tried it from a terminal window and it works as well but as soon as I unplug my external monitor the screen turns black again and doesn't come back. If I plug the monitor back in the screen stays black and the only thing I see is the mouse pointer. From here I go back into console (which I am able to see) and reboot from there. The sudo sed -i 's/GRUB_CMDLINE_LINUX=""/GRUB_CMDLINE_LINUX="acpi_osi=Linux"/g /etc/default/grub method. This one I got no instant change and after reboot still no change. I'm open to pretty much any suggestions you may have.

  Read the article

• 2 "P4" power connectors *AND* an 8 pin EPS connector -- all necessary?

  - by chris

  I recently bought an Arima SW350 motherboard. It supports 16 ddr simms as well as 2 opteron 2xx CPUs, so I imagine it may have pretty heavy power requirements... It has a 24 pin ATX power connector, 2 4 pin "P4" power connectors, and an 8 pin EPS power connector. My supermicro power supply has a 24 pin ATX connector and the EPS connector, and one P4 connector. Can I safely run this thing with only one P4 connector plugged in? Can I safely get a "hard disk to P4" adapter and use that to power the other P4 connector on the motherboard? Do I just need a new power supply? The board's documentation is pretty thin on the topic.

  Read the article

• Download from http server all directories,files and subdirectories and so on

  - by Jack

  I want to download from remote http server all files directories,files and so on. I found some solutions to ftp server,but doesn't work to http. Until now no luck with wget -r or -m. It download all direcotories in the root and the respective index.html. Not all files and sub-directory under such it(note the sub-directory may have another directory and so on) not sure on tags fix for me if needs. Note: I'm not a native english speaker,sorry for bad english.

  Read the article

< Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >