Search Results

Search found 12895 results on 516 pages for 'multi boot'.

Page 439/516 | < Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >

• Xorg.conf (nvidia) Second Monitor getting settings of first

  - by HennyH

  I've been spending the weekend (and some time before that) trying to set up my Korean QHD270 and Benq G2222HDL monitors with Ubuntu 13.10. With the nouveau drivers install both monitor function perfectly fine. After installing the nvidia drivers the Benq works but the QHD270 does not. Now, after days of struggling I managed to get the QHD270 to work following a mixture of blogs, particularly; this one and learnitwithme. Now, unfortunatly my G2222HDL does not work. I fixed the QHD270 by supplying a custom EDID, my xorg.conf looks like so (excluding keyboard and mouse): Section "ServerLayout" Identifier "Layout0" Screen "Default Screen" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Device" Identifier "Configured Video Device" Driver "nvidia" Option "CustomEDID" "DFP:/etc/X11/edid-shimian.bin" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Now, I tried defining a new Device,Monitor and Screen then in ServerLayout adding Screen "Second Screen" RightOf "Default Screen", but after doing so neither monitor worked. Hoping to fix the issue using a GUI based tool I opened up NVIDIA X Server Settings, which shows my current layout as: It seems that something is being output to the monitor, as suggested by my print screen: Any help would be greatly appreciated. Output of xrandr: Screen 0: minimum 8 x 8, current 5120 x 1440, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 597mm x 336mm 2560x1440 60.0*+ HDMI-0 disconnected (normal left inverted right x axis y axis) DP-0 disconnected (normal left inverted right x axis y axis) DVI-D-0 connected 2560x1440+2560+0 (normal left inverted right x axis y axis) 597mm x 336mm 2560x1440 60.0*+ DP-1 disconnected (normal left inverted right x axis y axis) And an extract from my log file (perhaps this is relevant?) [ 7.862] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680 at PCI:2:0:0 [ 7.862] (--) NVIDIA(0): CRT-0 [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0) (boot, connected) [ 7.862] (--) NVIDIA(0): DFP-1 [ 7.862] (--) NVIDIA(0): DFP-2 [ 7.862] (--) NVIDIA(0): DFP-3 [ 7.862] (--) NVIDIA(0): DFP-4 [ 7.862] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0): 330.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0): Internal Dual Link TMDS [ 7.862] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-4: Internal DisplayPort

  Read the article

• Network Your Computers & Devices: Step by Step

  - by The Geek

  If you’re looking for a great book to help you learn more about Windows home networking, there’s a new book on the market by our good friend Ciprian, and published by none other than Microsoft Press. Note: our friend Ciprian has been a guest contributor here on How-To Geek in the past, and he’s not only a geek that knows what he’s talking about, he’s also one of the more honest and decent people I’ve worked with. In his spare time, he runs the 7 Tutorials web site. The Book One of the great things about this book is that you aren’t limited to just Windows networking—it also explains how to connect Windows 7, XP, Vista, Mac OS X, and even Linux on the same network and share folders and devices between them. Everything in the book is written in a typical How-To Geek step-by-step format, with plenty of screenshots and pictures to help you through the process. Book Outline If you’re going to be spending some money on the book, you probably want to know what it’s all about, and since the Amazon page doesn’t give, well, much information at all, here’s the entire outline for you: Setting Up a Router and Devices Setting User Account on All Computers Setting Up Your Libraries on All Windows 7 Computers Creating the Network Customizing Network Sharing Settings in Windows 7 Creating the Homegroup and Joining Windows 7 Computers Sharing Libraries and Folders Sharing and Working with Devices Streaming Media Over the Network and the Internet Sharing Between Windows XP, Windows Vista, and Windows 7 Computers Sharing Between Mac OS X and Windows 7 Computers Sharing Between Ubuntu Linux and Windows 7 Computers Keeping the Network Secure Setting Up Parental Controls Troubleshooting Network and Internet Problems It’s a great book, with loads of information, and compared to most tech books isn’t very expensive—only $19.79 for the paperback and $9.99 for the Kindle version. Well worth it, and hey, it’s an official Microsoft Press book—written by a How-To Geek guest author. Network Your Computers & Devices Step by Step [Amazon] Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC 2011 International Space Station Calendar Available for Download (Free) Ultimate Elimination – Lego Black Ops [Video] BotSync Enables Secure FTP File Synchronization on Android Devices Enjoy Beautiful City Views with the Cityscape Theme for Windows 7 Luigi Installs Any OS on Google’s Cr-48 Notebook DIY iPad Stylus Offers Pen-Based Interaction on the Cheap

  Read the article

• ArchBeat Link-o-Rama Top 10 for September 9-15, 2012

  - by Bob Rhubart

  The Top 10 most-viewed items shared on the OTN ArchBeat Facebook page for the week of September 9-15, 2017. 15 Lessons from 15 Years as a Software Architect | Ingo Rammer In this presentation from the GOTO Conference in Copenhagen, Ingo Rammer shares 15 tips regarding people, complexity and technology that he learned doing software architecture for 15 years. Attend OTN Architect Day – by Architects, for Architects – October 25 You won't need 3D glasses to take in these live presentations (8 sessions, two tracks) on Cloud computing, SOA, and engineered systems. And the ticket price is: Zero. Nothing. Absolutely free. Register now for Oracle Technology Network Architect Day in Los Angeles. Thursday October 25, 2012, 8:00 a.m. – 5:00 p.m. Sofitel Los Angeles , 8555 Beverly Boulevard , Los Angeles, CA 90048. Cloud API and service designers, stop thinking small | Cloud Computing - InfoWorld "The focus must shift away from fine-grained APIs that provide some type of primitive service, such as pushing data to a block of storage or perhaps making a request to a cloud-rooted database," says InfoWorld's David Linthicum. "To go beyond primitives, you must understand how these services should be used in a much larger architectural context. In other words, you need to understand how businesses will employ these services to form real workplace solutions—inside and outside the enterprise." Adding a runtime picker to a taskflow parameter in WebCenter | Yannick Ongena Oracle ACE Yannick Ongena shows how to create an Oracle WebCenter popup to allow users to "select items or do more complex things." Oracle IAM 11g R2 docs are now available "One of the great things about the new doc set is the inclusion of ePub files," says Fusion Middleware A-Team blogger Chris Johnson. "This means that if you have an iPad you can load up the doc library onto that and read the docs on the couch." Setting up a local Yum Server using the Exalogic ZFS Storage Appliance | Donald A concise technical post from the man named Donald. What's New in Oracle VM VirtualBox 4.2? | The Fat Bloke Sings "One of the trends we've seen is that as the average host platform becomes more powerful, our users are consistently running more and more vm's," says The Fat Bloke. "Some of our users have large libraries of vm's of various vintages, whilst others have groups of vm's that are run together as an assembly of the various tiers in a multi-tiered software solution, for example, a database tier, middleware tier, and front-ends." The new VirtualBox release, a year in the making, addresses the needs of these users, he explains. Configuring Oracle Business Intelligence 11g MDS XML Source Control Management with Git Version Control | Christian Screen Oracle ACE Christian Screen developed this tutorial for those interested in learning how to configure the Oracle Business Intelligence 11g (11.1.1.6) metadata repository for development using the new MDS XML source control management functionality. Identity and Access Management at Oracle Open World 2012 | Brian Eidelman Fusion Middleware A-Team blogger Brian Eideleman highlights three Oracle Openworld sessions that will put Identity and Access Management in the spotlight, and shares a link to the "Focus On: Identity Management" document, a comprehensive listing of Openworld activities also dealing with IM. Starting and stopping WebLogic automatically using Upstart | Chris Johnson "In Ubuntu, RedHat and Oracle Linux there's a new flavor of init called Upstart that all the kids are using," says Oracle Fusion Middleware A-Team member Chris Johnson. "It's the new hotness when it comes to making programs into daemons and wiring them to start and stop at appropriate times." Thought for the Day "The purpose of software engineering is to control complexity, not to create it." — Pamela Zave Source: SoftwareQuotes.com

  Read the article

• How to Make the Gnome Panels in Ubuntu Totally Transparent

  - by The Geek

  We all love transparency, since it makes your desktop so beautiful and lovely—so today we’re going to show you how to apply transparency to the panels in your Ubuntu Gnome setup. It’s an easy process, and here’s how to do it. This article is the first part of a multi-part series on how to customize the Ubuntu desktop, written by How-To Geek reader and ubergeek, Omar Hafiz. Making the Gnome Panels Transparent Of course we all love transparency, It makes your desktop so beautiful and lovely. So you go for enabling transparency in your panels , you right click on your panel, choose properties, go to the Background tab and make your panel transparent. Easy right? But instead of getting a lovely transparent panel, you often get a cluttered, ugly panel like this: Fortunately it can be easily fixed, all we need to do is to edit the theme files. If your theme is one of those themes that came with Ubuntu like Ambiance then you’ll have to copy it from /usr/share/themes to your own .themes directory in your Home Folder. You can do so by typing the following command in the terminal cp /usr/share/themes/theme_name ~/.themes Note: don’t forget to substitute theme_name with the theme name you want to fix. But if your theme is one you downloaded then it is already in your .themes folder. Now open your file manager and navigate to your home folder then do to .themes folder. If you can’t see it then you probably have disabled the “View hidden files” option. Press Ctrl+H to enable it. Now in .themes you’ll find your previously copied theme folder there, enter it then go to gtk-2.0 folder. There you may find a file named “panel.rc”, which is a configuration file that tells your panel how it should look like. If you find it there then rename it to “panel.rc.bak”. If you don’t find don’t panic! There’s nothing wrong with your system, it’s just that your theme decided to put the panel configurations in the “gtkrc” file. Open this file with your favorite text editor and at the end of the file there is line that looks like this “include “apps/gnome-panel.rc””. Comment out this line by putting a hash mark # in front of it. Now it should look like this “# include “apps/gnome-panel.rc”” Save and exit the text editor. Now change your theme to any other one then switch back to the one you edited. Now your panel should look like this: Stay tuned for the second part in the series, where we’ll cover how to change the color and fonts on your panels. Latest Features How-To Geek ETC How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The Legend of Zelda – 1980s High School Style [Video] Suspended Sentence is a Free Cross-Platform Point and Click Game Build a Batman-Style Hidden Bust Switch Make Your Clock Creates a Custom Clock for your Android Homescreen Download the Anime Angels Theme for Windows 7 CyanogenMod Updates; Rolls out Android 2.3 to the Less Fortunate

  Read the article

• SQL 2012 Licensing Thoughts

  - by Geoff N. Hiten

  The only thing more controversial than new Federal Tax plans is new Licensing plans from Microsoft.  In both cases, everyone calculates several numbers.  First, will I pay more or less under this plan?  Second, will my competition pay more or less than now?  Third, will <insert interesting person/company here> pay more or less?  Not that items 2 and 3 are meaningful, that is just how people think. Much like tax plans, the devil is in the details, so lets see how this looks.  Microsoft shows it here: http://www.microsoft.com/sqlserver/en/us/future-editions/sql2012-licensing.aspx First up is a switch from per-socket to per-core licensing.  Anyone who didn’t see something like this coming should rapidly search for a new line of work because you are not paying attention.  The explosion of multi-core processors has made SQL Server a bargain.  Microsoft is in business to make money and the old per-socket model was not going to do that going forward. Per-core licensing also simplifies virtualization licensing.  Physical Core = Virtual Core, at least for licensing.  Oversubscribe your processors, that’s your lookout.  You still pay for  what is exposed to the VM.  The cool part is you can seamlessly move physical and virtual workloads around and the licenses follow.  The catch is you have to have Software Assurance to make the licenses mobile.  Nice touch there. Let’s have a moment of silence for the late, unlamented, largely ignored Workgroup Edition.  To quote the Microsoft  FAQ:  “Standard becomes our sole edition for basic database needs”.  Considering I haven’t encountered a singe instance of SQL Server Workgroup Edition in the wild, I don’t think this will be all that controversial. As for pricing, it looks like a wash with current per-socket pricing based on four core sockets.  Interestingly, that is the minimum core count Microsoft proposes to swap to transition per-socket to per-core if you are on Software Assurance.  Reading the fine print shows that if you are using more, you will get more core licenses: From the licensing FAQ. 15. How do I migrate from processor licenses to core licenses?  What is the migration path? Licenses purchased with Software Assurance (SA) will upgrade to SQL Server 2012 at no additional cost. EA/EAP customers can continue buying processor licenses until your next renewal after June 30, 2012. At that time, processor licenses will be exchanged for core-based licenses sufficient to cover the cores in use by processor-licensed databases (minimum of 4 cores per processor for Standard and Enterprise, and minimum of 8 EE cores per processor for Datacenter). Looks like the folks who invested in the AMD 12-core chips will make out like bandits. Now, on to something new: SQL Server Business Intelligence Edition. Yep, finally a BI-specific SKU licensed for server+CAL configurations only.  Note that Enterprise Edition still supports the complete feature set; the BI Edition is intended for smaller shops who want to use the full BI feature set but without needing Enterprise Edition scale (or costs).  No, you don’t get ColumnStore, Compression, or Partitioning in the BI Edition.  Those are Enterprise scale features, ThankYouVeryMuch.  Then again, your starting licensing costs are about one sixth of an Enterprise Edition system (based on an 8 core server). The only part of the message I am missing is if the current Failover Licensing Policy will change.  Do we need to fully or partially license failover servers?  That is a detail I definitely want to know.

  Read the article

• Networking works on Live CD but not after installation.

  - by user9054

  Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd, so happily I installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started . It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up. Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP. I cannot understand why wifi-radar is using DHCP when I have specified manual settings. Then I decided to use the wired network to surf the net looking for a solution. So I plugged in the network cable from my modem , configured eth0 , used pppoeconf and connected the net. Then I foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon and it said something about network error or something. Now my ifconfig shows only lo .Can anybody help me on this. PS : 1) I tried linux mint 10 and had the same issue . on rebooting wireless network was not getting detected. 2) I have made myself the administrator so that there is no issue of rights or anything.

  Read the article

• June is going to be a busy month!

  - by Monica Kumar

  Who says things slow down in summer? Well, maybe for school kids, but certainly not for Oracle's Virtualization team! June is turning out to be one of the busiest months for us. We are going to be participating in a number of industry events. If you happen to be at any of these, please stop by the Oracle booth and our session/s. Let's go through a run down of these events. 1. 13th Annual Call Center Week June 4-8 Ceasar's Palace, Las Vegas  Event website You're now wondering...why are we at this call center show. It's really simple, Oracle's Desktop Virtualization solutions offer the best way for call center to reliably and securely access enterprise apps using a variety of endpoint devices such as an iPad or a Sun Ray Client. Provisioning new employees becomes a breeze. We'll be jointly showcasing our solution with Oracle's CRM team. Come check us out.  2. Gartner Infrastructure & Management, Florida June 5-7 Orlando, FL  Event website Oracle is a Premier sponsor of the Gartner IOM Summit this June 5 – 7, 2012 in Orlando, FL.  Attendees will have the opportunity to meet with Oracle experts in a variety of sessions, including demonstrations during the showcase receptions. 3. Cloud Expo East Check out our website for details of our participation. Stop by at booth 511 to talk to our Cloud, Virtualization and Big Data experts. In addition, we're delivering a number of sessions at Cloud Expo. The one I want to highlight is the following: Session: Borderless Applications in the Cloud with Oracle VM and Oracle Virtual Assembly Builder Abstract: As virtualization adoption progresses beyond server consolidation, this is also transforming how enterprise applications are deployed and managed in an agile environment. The traditional method of business-critical application deployment where administrators have to contend with an array of unrelated tools, custom scripts to deploy and manage applications, OS and VM instances into a fast changing cloud computing environment can no longer scale effectively to achieve response time and desired efficiency. Oracle VM and Oracle Virtual Assembly Builder allow applications, associated components, deployment metadata, management policies and best practices to be encapsulated into ready-to-run VMs for rapid, repeatable deployment and ease of management. Join us in this Cloud Expo session to see how Oracle VM and Oracle Virtual Assembly Builder allow you to deploy complex multi-tier applications in minutes and enables you to easily onboard existing applications to cloud environments.  Get your free Cloud Expo pass now!  We're offering complimentary VIP Gold Passes. Go to https://www.blueskyz.com/v3/Login.aspx?ClientID=19&EventID=56&sg=177, click “Continue” if you are a New User or log-in if you have already created an account. Once there, you can view the Agenda or Register for Cloud Expo. To register - fill out the basic business card questions and then enter oracleVIPgold in the Priority Code field to change the price from $2,000 to $0. 4. CiscoLive 2012  June 10-14 San Diego, CA Event website Our Oracle VM and Oracle Linux experts will talk about joint collaboration with Cisco on UCS. We'll also highlight customer use cases. 5. Gartner Infrastructure & Operations Management Summit, EMEA Dates: June 11-12 Frankfurt, Germany Event website Meet experts from our Virtualization and Linux team in EMEA. Stop by our booth and find out what's new in Oracle VM Server for x86 and Oracle Linux. June is going to be busy.

  Read the article

• Educational, well-written FOSS projects to read, study or discuss

  - by Godot

  Before you say it: yes, this "question" has been asked other times. However, I could not fine many of such questions and not that easily, and those I found had similar results. What I'm trying to say that there are no comprehensive lists of well written Open Source projects, so I decided to set some requirements for the entries (one or possibly more): Idiomatic use of the language in which they are written The project should be lightweight. Not as in "a few kbs", as in "clean" and possibly following the UNIX philosophy, making an efficient use of resources and performing its duty and nothing more. No code bloat, most importantly. Projects like Firefox and GNOME wouldn't qualify, for example. Minimal reliance on external, non-standard libraries, with exceptions for some common FOSS libraries (curses, Xlib, OpenGL and possibly "usual suspects" like gtk+, webkit and Boost). Reliance on well-written libraries is welcome. No reliance on proprietary software - for obvious reasons (programs that rely on XNA, DirectX, Cocoa and similar, for example). Well-documented code is welcome. Include link to web interfaces to their repositories if possible. Here are some sample projects that often pop up in these threads: Operating Systems Plan 9 from Bell Labs: More or less, the official "sequel" to UNIX. Written in C by the same people who invented C! NetBSD: The most portable BSD implementation, written in C and also a good example of portable and organized code. Network and Databases Sqlite: Extremely lightweight and extremely efficient, one of the best pieces of C software I've seen. Count the lines yourself! Lighttpd: A small but pretty reliable web server written in C. Programming languages and VMs Lua: extremely lightweight multi-paradigm programming language. Written in C. Tiny C Compiler: Really tiny C compiler. Not really comparable to GCC or Clang but does its job. PyPy: A Python implementation written in Python. Pharo: OK, I admit it, I'm not really a Smalltalk expert but Pharo is a fork of Squeak and looked rather interesting. Stackless Python - An implementation of Python that doesn't rely on the C call stack - written in C (with some parts in Python) Games and 3D: Angband: One of the most accessible roguelike codebases around here, written in C. Ogre3D: Cross-platform 3D engine. Gets bloated if you don't skip the platform-specific implementation code, otherwise is a pretty solid example of good C++ OO. Simon Tatham's Portable Puzzle Collection: Title says it all. Other - dwm: Lightweight window manager. Written in C. Emulation and Reverse Engineering - Bochs: x86 emulator, written in C++ and tiny enough. - MAME: If you want to see C at one of its lowest levels, MAME is for you. May not be as clean as the other projects but it can teach you A LOT. Before you ask: I didn't mention Linux because it has become quite bloated in the last few years, Linus has also confirmed it. Nonetheless, it'd be a great educational read the same, even if for other reasons. Same for GCC. Feel free to edit or wikify my post. I hope you won't lock my question, I'm only trying to organize a little community effort for the good of all those people who want to enhance their coding skills.

  Read the article

• What are the default mount settings for mount / fstab?

  - by John Craick

  What are the default mounting options for a non root partition ? The man entry for mount says ... defaults - use default options: rw, suid, dev, exec, auto, nouser, and async. ... so that might be what we expect to see. But, unless I'm missing something, that's not what happens. I have an ext3 partition labelled "NewHome20G" which is seen as /dev/sdc6 by the system. This we can see from ... root@john-pc1204:~# blkid | grep NewHome20G /dev/sdc6: LABEL="NewHome20G" UUID="d024bad5-906c-46c0-b7d4-812daf2c9628" TYPE="ext3" I have an entry in fstab as follows ... root@john-pc1204:~# cat /etc/fstab | grep NewHome LABEL=NewHome20G /media/NewHome20G ext3 rw,nosuid,nodev,exec,users 0 2 Note the option settings that are specified in that fstab line. Now I look at how the partition is actually mounted after boot up ... root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,noexec,nosuid,nodev) [NewHome20G] ... so, when the filesystem gets mounted the exec & users options I specified seem to have been ignored. Just to be sure, I unmount sdc6, remount it and look at the mount options again ... root@john-pc1204:~# umount /dev/sdc6 root@john-pc1204:~# mount /dev/sdc6 root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,noexec,nosuid,nodev) [NewHome20G] .... same result Now I unmount the partition again, remount it specifying the exec option and look at the result ... root@john-pc1204:~# umount /dev/sdc6 root@john-pc1204:~# mount /dev/sdc6 -o exec root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,nosuid,nodev) [NewHome20G] ... and here the exec option has finally taken effect and the noexec setting has vanished. Just for interest, I re-mount the partition with the defaults option root@john-pc1204:~# umount /dev/sdc6 root@john-pc1204:~# mount /dev/sdc6 -o defaults root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,noexec,nosuid,nodev) [NewHome20G] The noexec is back, so it looks very like rw,noexec,nosuid,nodev are the default options which is NOT what man says. Why does this matter ? I have a folder full of useful scripts stored on a data disk. Because that disk is mounted noexec those scripts won't run, even though they have all been set with chmod 777. I can work round this in several ways but it's disappointing that the man entry seems to be wrong. Have I missed something obvious here or have the default options in Ubuntu changed from what they were a few versions ago ?

  Read the article

• ArchBeat Link-o-Rama for October 14-20, 2012

  - by Bob Rhubart

  The Top 10 items shared on the OTN ArchBeat Facebook page for the week of October 14-21, 2012. Panel: On the Impact of Software | InfoQ Les Hatton (Oakwood Computing Associates), Clive King (Oracle), Paul Good (Shell), Mike Andrews (Microsoft) and Michiel van Genuchten (moderator) discuss the impact of software engineering on our lives in this panel discussion recorded at the Computer Society Software Experts Summit 2012. ResCare Solves Content Lifecycle Challenges with Oracle WebCenter Learn how ResCare solves content lifecycle challenges with Oracle WebCenter. Speakers: Joe Lichtefeld, VP of Application Services & PMO, ResCare Wayne Boerger, Product Manager, TEAM Informatics Doug Thompson, EVP Global Development, TEAM Informatics Date: Tuesday, October 30, 2012 Time: 10:00 a.m. PT / 1:00 p.m. ET WebLogic Server 11gR1 Interactive Quick Reference "The WebLogic Server 11gR1 Administration interactive quick reference," explains Juergen Kress, "is a multimedia tool for various terms and concepts used in WebLogic Server architecture. This tool is available for administrators for online or offline use. This is built as a multimedia web page which provides descriptions of WebLogic Server Architectural components, and references to relevant documentation. This tool offers valuable reference information for any complex concept or product in an intuitive and useful manner." Oracle ACE Directors Nordic Tour 2012 : Venues and BI Presentations | Mark Rittman Oracle ACE Director Mark Rittman shares information on the Oracle ACE Director Tour, as the community leaders make their way through the land of the midnight sun, with events in Copenhagen, Stockholm, Oslo and Helsinki. Mobile Apps for EBS | Capgemini Oracle Blog Capgemini solution architect Satish Iyer breifly describes how Oracle ADF and Oracle SOA Suite can be used to fill the gap in mobile applications for Oracle EBS. Introducing the New Face of Fusion Applications | Misha Vaughan Oracle ACE Directors Debra Lilly and Floyd Teter have already blogged about the the new face of Oracle Fusion Applications. Now Applications User Experience Architect Misha Vaughan shares a brief overview of how the Oracle Applications User Experience (UX) team developed the new look. BPM 11g - Dynamic Task Assignment with Multi-level Organization Units | Mark Foster "I've seen several requirements to have a more granular level of task assignment in BPM 11g based on some value in the data passed to the process," says Fusion Middleware A-Team architect Mark Foster. "Parametric Roles is normally the first port of call to try to satisfy this requirement, but in this blog we will show how a lot of use-cases can be satisfied by the easier to implement and flexible Organization Unit." OTN Architect Day Los Angeles - Oct 25 Oracle Technology Network Architect Day in Los Angeles happens in one week. Register now to make sure you don't miss out on a rich schedule of expert technical sessions and peer interaction covering the use of Oracle technologies in cloud computing, SOA, and more. Even better: it's all free. When: October 25, 2012, 8:30am - 5:00pm. Where: Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048. Oracle VM VirtualBox 4.2.2 released | Oracle's Virtualization Blog The Fat Bloke weighs in with a short post with information on where you can find information and the download for the latest VirtualBox release. Advanced Oracle SOA Suite #OOW 2012 SOA Presentations The Oracle SOA Product Management team has compiled a complete list of all twelve of their Oracle SOA Suite presentations from Oracle OpenWorld 2012, with links to the slide decks. Thought for the Day "Software: do you write it like a book, grow it like a plant, accrete it like a pearl, or construct it like a building?" — Jeff Atwood Source: softwarequotes.com

  Read the article

• HOWTO Turn off SPARC T4 or Intel AES-NI crypto acceleration.

  - by darrenm

  Since we released hardware crypto acceleration for SPARC T4 and Intel AES-NI support we have had a common question come up: 'How do I test without the hardware crypto acceleration?'. Initially this came up just for development use so developers can do unit testing on a machine that has hardware offload but still cover the code paths for a machine that doesn't (our integration and release testing would run on all supported types of hardware anyway).  I've also seen it asked in a customer context too so that we can show that there is a performance gain from the hardware crypto acceleration, (not just the fact that SPARC T4 much faster performing processor than T3) and measure what it is for their application. With SPARC T2/T3 we could easily disable the hardware crypto offload by running 'cryptoadm disable provider=n2cp/0'.  We can't do that with SPARC T4 or with Intel AES-NI because in both of those classes of processor the encryption doesn't require a device driver instead it is unprivileged user land callable instructions. Turns out there is away to do this by using features of the Solaris runtime loader (ld.so.1). First I need to expose a little bit of implementation detail about how the Solaris Cryptographic Framework is implemented in Solaris 11.  One of the new Solaris 11 features of the linker/loader is the ability to have a single ELF object that has multiple different implementations of the same functions that are selected at runtime based on the capabilities of the machine.  The alternate to this is having the application coded to call getisax() and make the choice itself.  We use this functionality of the linker/loader when we build the userland libraries for the Solaris Cryptographic Framework (specifically libmd.so, and the unfortunately misnamed due to historical reasons libsoftcrypto.so) The Solaris linker/loader allows control of a lot of its functionality via environment variables, we can use that to control the version of the cryptographic functions we run.  To do this we simply export the LD_HWCAP environment variable with values that tell ld.so.1 to not select the HWCAP section matching certain features even if isainfo says they are present.  For SPARC T4 that would be: export LD_HWCAP="-aes -des -md5 -sha256 -sha512 -mont -mpul" and for Intel systems with AES-NI support: export LD_HWCAP="-aes" This will work for consumers of the Solaris Cryptographic Framework that use the Solaris PKCS#11 libraries or use libmd.so interfaces directly.  It also works for the Oracle DB and Java JCE.  However does not work for the default enabled OpenSSL "t4" or "aes-ni" engines (unfortunately) because they do explicit calls to getisax() themselves rather than using multiple ELF cap sections. However we can still use OpenSSL to demonstrate this by explicitly selecting "pkcs11" engine  using only a single process and thread.  $ openssl speed -engine pkcs11 -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 54170.81k 187416.00k 489725.70k 805445.63k 1018880.00k $ LD_HWCAP="-aes" openssl speed -engine pkcs11 -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 29376.37k 58328.13k 79031.55k 86738.26k 89191.77k We can clearly see the difference this makes in the case where AES offload to the SPARC T4 was disabled. The "t4" engine is faster than the pkcs11 one because there is less overhead (again on a SPARC T4-1 using only a single process/thread - using -multi you will get even bigger numbers). $ openssl speed -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 85526.61k 89298.84k 91970.30k 92662.78k 92842.67k Yet another cool feature of the Solaris linker/loader, thanks Rod and Ali. Note these above openssl speed output is not intended to show the actual performance of any particular benchmark just that there is a significant improvement from using hardware acceleration on SPARC T4. For cryptographic performance benchmarks see the http://blogs.oracle.com/BestPerf/ postings.

  Read the article

• How to Waste Your Marketing Budget

  - by Mike Stiles

  Philosophers have long said if you find out where a man’s money is, you’ll know where his heart is. Find out where money in a marketing budget is allocated, and you’ll know how adaptive and ready that company is for the near future. Marketing spends are an investment. Not unlike buying stock, the money is placed in areas the marketer feels will yield the highest return. Good stock pickers know the lay of the land, the sectors, the companies, and trends. Likewise, good marketers should know the media available to them, their audience, what they like & want, what they want their marketing to achieve…and trends. So what are they doing? And how are they doing? A recent eTail report shows nearly half of retailers planned on focusing on SEO, SEM, and site research technologies in the coming months. On the surface, that’s smart. You want people to find you. And you’re willing to let the SEO tail wag the dog and dictate the quality (or lack thereof) of your content such as blogs to make that happen. So search is prioritized well ahead of social, multi-channel initiatives, email, even mobile - despite the undisputed explosive growth and adoption of it by the public. 13% of retailers plan to focus on online video in the next 3 months. 29% said they’d look at it in 6 months. Buying SEO trickery is easy. Attracting and holding an audience with wanted, relevant content…that’s the hard part. So marketers continue to kick the content can down the road. Pretty risky since content can draw and bind customers to you. Asked to look a year ahead, retailers started thinking about CRM systems, customer segmentation, and loyalty, (again well ahead of online video, social and site personalization). What these investors are missing is social is spreading across every function of the enterprise and will be a part of CRM, personalization, loyalty programs, etc. They’re using social for engagement but not for PR, customer service, and sales. Mistake. Allocations are being made seemingly blind to the trends. Even more peculiar are the results of an analysis Mary Meeker of Kleiner Perkins made. She looked at how much time people spend with media types and how marketers are investing in those media. 26% of media consumption is online, marketers spend 22% of their ad budgets there. 10% of media time is spent with mobile, but marketers are spending 1% of their ad budgets there. 7% of media time is spent with print, but (get this) marketers spend 25% of their ad budgets there. It’s like being on Superman’s Bizarro World. Mary adds that of the online spending, most goes to search while spends on content, even ad content, stayed flat. Stock pickers know to buy low and sell high. It means peering with info in hand into the likely future of a stock and making the investment in it before it peaks. Either marketers aren’t believing the data and trends they’re seeing, or they can’t convince higher-ups to acknowledge change and adjust their portfolios accordingly. Follow @mikestilesImage via stock.xchng

  Read the article

• Desktop Fun: Runic Style Fonts

  - by Asian Angel

  Most of the time regular fonts are just what you need for documents, invitations, or adding text to images. But what if you are in the mood for something unusual or unique to add that perfect touch? If you like older runic style writing, then enjoy finding some new favorites for your collection with our Runic Style Fonts collection. Temple photo by ShinyShiny. Note: To manage the fonts on your Windows 7, Vista, & XP systems see our article here. The Runic Style Fonts Sable Download Worn Manuscript Download JSL Ancient Download Antropos Download Cave Gyrl Download The Roman Runes Alliance Download Ancient Geek Download Troll Download Runish Quill MK *includes two font types Download DS RUNEnglish 2 Download Runes Written *includes two font types Download Wolves And Ravens Download Art Greco Download Dalek Download Glagolitic AOE Download Linear B Download Cartouche Download Greywolf Glyphs *includes 62 individual characters Note: This group represents A – Z in all capital letters. Note: This group represents A – Z in all lower case letters. Note: This group represents the numbers 0 – 9. Download Africain *includes 62 individual characters Note: This group represents A – Z in all capital letters. Note: This group represents A – Z in all lower case letters. Note: This group represents the numbers 0 – 9. Download Cave Writings *includes 52 individual characters Note: This group represents A – Z in all capital letters. Note: This group represents A – Z in all lower case letters. Download For more great ways to customize your computer be certain to look through our Desktop Fun section. Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Five Sleek Audi R8 Car Themes for Chrome and Iron MS Notepad Replacement Metapad Returns with a New Beta Version Spybot Search and Destroy Now Available as a Portable App (PortableApps.com) ShapeShifter: What Are Dreams? [Video] This Computer Runs on Geek Power Wallpaper Bones, Clocks, and Counters; A Look at the First 35,000 Years of Computing

  Read the article

• Critical Threads Optimization

  - by Rafael Vanoni

  Background One of the more common issues we've been seeing in the field is the growing difficulty in optimizing performance of multi-threaded applications. A good portion of this difficulty is due to the increasing complexity of modern processors that present various degrees of sharing relationships between hardware components. Take any current CMT processor and you'll find any number of CPUs sharing execution pipelines, floating point units, caches, etc. Consequently, applying the traditional recipe of one software thread for each CPU will have varying degrees of success, according to the layout of the underlying hardware. On top of this increasing complexity we've also seen processors with features that aim at dynamically resourcing software threads according to their utilization. Intel's Turbo Boost allows processors to increase their operating frequency if there is enough thermal headroom available and the processor isn't fully utilized. More recently, the SPARC T4 processor introduced dynamic threading, allowing each core to dynamically allocate more resources to its active CPUs. Both cases are in essence recognizing that current processors will be running a wide mix of workloads, some will be designed for throughput, others for low latency. The hardware is providing mechanisms to dynamically resource threads according to their runtime behavior. We're very aware of these challenges in Solaris, and have been working to provide the best out of box performance while providing mechanisms to further optimize applications when necessary. The Critical Threads Optimzation was introduced in Solaris 10 8/11 and Solaris 11 as one such mechanism that allows customers to both address issues caused by contention over shared hardware resources and explicitly take advantage of features such as T4's dynamic threading. What it is The basic idea is to allow performance critical threads to execute with more exclusive access to hardware resources. For example, when deploying an application that implements a producer/consumer model, it'll likely be advantageous to give the producer more exclusive access to the hardware instead of having it competing for resources with all the consumers. In the case of a T4 based system, we may want to have a producer running by itself on a single core and create one consumer for each of the remaining CPUs. With the Critical Threads Optimization we're extending the semantics of scheduling priorities (which thread should run first) to include priority over shared resources (which thread should have more "space"). Now the scheduler will not only run higher priority threads first: it will also provide them with more exclusive access to hardware resources if they are available. How does it work ? Using the previous example in Solaris 11, all you'd have to do would be to place the producer in the Fixed Priority (FX) scheduling class at priority 60, or in the Real Time (RT) class at any priority and Solaris will try to give it more "hardware space". On both Solaris 10 8/11 and Solaris 11 this can be achieved through the existing priocntl(1,2) and priocntlset(2) interfaces. If your application already assigns these priorities to performance critical threads, there's no additional step you need to take. One important aspect of this optimization is that it requires some level of idleness in the system, either as a result of sizing the application before hand or through periods of transient idleness during runtime. If the system is fully committed, the scheduler will put all the available CPUs to work.Best practices If you're an application developer, we encourage you to look into assigning the right priorities for the different threads in your application. Solaris provides different scheduling classes (Time Share, Interactive, Fair Share, Fixed Priority and Real Time) that offer different policies and behaviors. It is not always simple to figure out which set of threads are critical to the performance of a workload, and it may not always be feasible to take advantage of this optimization, but we believe that this can be correctly (and safely) done during development. Overall, the out of box performance in Solaris should meet your workload's requirements. If you are looking into that extra bit of performance, then the Critical Threads Optimization may be what you're looking for.

  Read the article

• VirtualBox 3.2 is released! A Red Letter Day?

  - by Fat Bloke

  Big news today! A new release of VirtualBox packed full of innovation and improvements. Over the next few weeks we'll take a closer look at some of these new features in a lot more depth, but today we'll whet your appetite with the headline descriptions. To start with, we should point out that this is the first Oracle-branded version which makes today a real Red-letter day ;-)  Oracle VM VirtualBox 3.2 Version 3.2 moves VirtualBox forward in 3 main areas ( handily, all beginning with "P" ) : performance, power and supported guest operating system platforms.  Let's take a look: Performance New Latest Intel hardware support - Harnessing the latest in chip-level support for virtualization, VirtualBox 3.2 supports new Intel Core i5 and i7 processor and Intel Xeon processor 5600 Series support for Unrestricted Guest Execution bringing faster boot times for everything from Windows to Solaris guests; New Large Page support - Reducing the size and overhead of key system resources, Large Page support delivers increased performance by enabling faster lookups and shorter table creation times. New In-hypervisor Networking - Significant optimization of the networking subsystem has reduced context switching between guests and host, increasing network throughput by up to 25%. New New Storage I/O subsystem - VirtualBox 3.2 offers a completely re-worked virtual disk subsystem which utilizes asynchronous I/O to achieve high-performance whilst maintaining high data integrity; New Remote Video Acceleration - The unique built-in VirtualBox Remote Display Protocol (VRDP), which is primarily used in virtual desktop infrastructure deployments, has been enhanced to deliver video acceleration. This delivers a rich user experience coupled with reduced computational expense, which is vital when servers are running hundreds of virtual machines; Power New Page Fusion - Traditional Page Sharing techniques have suffered from long and expensive cache construction as pages are scrutinized as candidates for de-duplication. Taking a smarter approach, VirtualBox Page Fusion uses intelligence in the guest virtual machine to determine much more rapidly and accurately those pages which can be eliminated thereby increasing the capacity or vm density of the system; New Memory Ballooning- Ballooning provides another method to increase vm density by allowing the memory of one guest to be recouped and made available to others; New Multiple Virtual Monitors - VirtualBox 3.2 now supports multi-headed virtual machines with up to 8 virtual monitors attached to a guest. Each virtual monitor can be a host window, or be mapped to the hosts physical monitors; New Hot-plug CPU's - Modern operating systems such Windows Server 2008 x64 Data Center Edition or the latest Linux server platforms allow CPUs to be dynamically inserted into a system to provide incremental computing power while the system is running. Version 3.2 introduces support for Hot-plug vCPUs, allowing VirtualBox virtual machines to be given more power, with zero-downtime of the guest; New Virtual SAS Controller - VirtualBox 3.2 now offers a virtual SAS controller, enabling it to run the most demanding of high-end guests; New Online Snapshot Merging - Snapshots are powerful but can eat up disk space and need to be pruned from time to time. Historically, machines have needed to be turned off to delete or merge snapshots but with VirtualBox 3.2 this operation can be done whilst the machines are running. This allows sophisticated system management with minimal interruption of operations; New OVF Enhancements - VirtualBox has supported the OVF standard for virtual machine portability for some time. Now with 3.2, VirtualBox specific configuration data is also stored in the standard allowing richer virtual machine definitions without compromising portability; New Guest Automation - The Guest Automation APIs allow host-based logic to drive operations in the guest; Platforms New USB Keyboard and Mouse - Support more guests that require USB input devices; New Oracle Enterprise Linux 5.5 - Support for the latest version of Oracle's flagship Linux platform; New Ubuntu 10.04 ("Lucid Lynx") - Support for both the desktop and server version of the popular Ubuntu Linux distribution; And as a man once said, "just one more thing" ... New Mac OS X (experimental) - On Apple hardware only, support for creating virtual machines run Mac OS X. All in all this is a pretty powerful release packed full of innovation and speedups. So what are you waiting for?  -FB 

  Read the article

• SSAS: Utility to export SQL code from your cube's Data Source View (DSV)

  - by DrJohn

  When you are working on a cube, particularly in a multi-person team, it is sometimes necessary to review what changes that have been done to the SQL queries in the cube's data source view (DSV). This can be a problem as the SQL editor in the DSV is not the best interface to review code. Now of course you can cut and paste the SQL into SSMS, but you have to do each query one-by-one. What is worse your DBA is unlikely to have BIDS installed, so you will have to manually export all the SQL yourself and send him the files. To make it easy to get hold of the SQL in a Data Source View, I developed a C# utility which connects to an OLAP database and uses Analysis Services Management Objects (AMO) to obtain and export all the SQL to a series of files. The added benefit of this approach is that these SQL files can be placed under source code control which means the DBA can easily compare one version with another. The Trick When I came to implement this utility, I quickly found that the AMO API does not give direct access to anything useful about the tables in the data source view. Iterating through the DSVs and tables is easy, but getting to the SQL proved to be much harder. My Google searches returned little of value, so I took a look at the idea of using the XmlDom to open the DSV’s XML and obtaining the SQL from that. This is when the breakthrough happened. Inspecting the DSV’s XML I saw the things I was interested in were called TableType DbTableName FriendlyName QueryDefinition Searching Google for FriendlyName returned this page: Programming AMO Fundamental Objects which hinted at the fact that I could use something called ExtendedProperties to obtain these XML attributes. This simplified my code tremendously to make the implementation almost trivial. So here is my code with appropriate comments. The full solution can be downloaded from here: ExportCubeDsvSQL.zip   using System;using System.Data;using System.IO;using Microsoft.AnalysisServices; ... class code removed for clarity// connect to the OLAP server Server olapServer = new Server();olapServer.Connect(config.olapServerName);if (olapServer != null){ // connected to server ok, so obtain reference to the OLAP databaseDatabase olapDatabase = olapServer.Databases.FindByName(config.olapDatabaseName);if (olapDatabase != null){ Console.WriteLine(string.Format("Succesfully connected to '{0}' on '{1}'",   config.olapDatabaseName,   config.olapServerName));// export SQL from each data source view (usually only one, but can be many!)foreach (DataSourceView dsv in olapDatabase.DataSourceViews){ Console.WriteLine(string.Format("Exporting SQL from DSV '{0}'", dsv.Name));// for each table in the DSV, export the SQL in a fileforeach (DataTable dt in dsv.Schema.Tables){ Console.WriteLine(string.Format("Exporting SQL from table '{0}'", dt.TableName)); // get name of the table in the DSV// use the FriendlyName as the user inputs this and therefore has control of itstring queryName = dt.ExtendedProperties["FriendlyName"].ToString().Replace(" ", "_");string sqlFilePath = Path.Combine(targetDir.FullName, queryName + ".sql"); // delete the sql file if it exists... file deletion code removed for clarity// write out the SQL to a fileif (dt.ExtendedProperties["TableType"].ToString() == "View"){ File.WriteAllText(sqlFilePath, dt.ExtendedProperties["QueryDefinition"].ToString());}if (dt.ExtendedProperties["TableType"].ToString() == "Table"){ File.WriteAllText(sqlFilePath, dt.ExtendedProperties["DbTableName"].ToString()); } } } Console.WriteLine(string.Format("Successfully written out SQL scripts to '{0}'", targetDir.FullName)); } }   Of course, if you are following industry best practice, you should be basing your cube on a series of views. This will mean that this utility will be of limited practical value unless of course you are inheriting a project and want to check if someone did the implementation correctly.

  Read the article

• How to debug lag using Bluetooth connected mouse and A2DP headset?

  - by gertvdijk

  I own a Logitech M555b mouse (since a week) for use with my HP Elitebook 8570w laptop running Kubuntu 12.04. Works fine right after connecting using the KDE Bluetooth control module. However, after some time (seemingly random), it starts to lag. Movements are being delayed for roughly 500ms for a short period of time. Usually it recovers after some time too, but it can take minutes. All actions are being delayed: movements, click, scrolls. Additionally, the movements can be choppy during these times. A workaround that always works for the same short period of time is to disconnect an re-connect the mouse. This can be done using the same KDE Bluetooth control module. What did I try already? Running this at boot time: echo on > `readlink -f /sys/class/bluetooth/hci0`/../../../power/level To disable any power saving features on the Bluetooth hci0 device. Check the mouse's batteries (it's just a week old, other new batteries: same result) Checking logs and kernel messages about Bluetooth-related entries: none aside the expected messages on connect time. I'm running kernel 3.5.0-13-generic as provided in the xorg-edgers PPA. Booting the regular 3.2 Precise kernel results in the same behaviour. Some other information that may help: It happens when no other Bluetooth connections are active on the machine. Similar symptoms also occur on my Bluetooth stereo (A2DP) headset, but then it's audio lagging and skipping. Swapping Bluetooth profiles as described here then helps. Conclusion: it's not the mouse that's faulty. The headset always worked fine using my now dead Thinkpad T61p with built-in Bluetooth. The bluetooth module in my laptop is connected via USB and shows up as Bus 002 Device 003: ID 0a5c:21e1 Broadcom Corp. I'm mobile and several people around me are using Bluetooth at work (A2DP mostly). It also occurs at home, where my neighbours are probably using Bluetooth as well. It could just be radio interference, but I think Bluetooth connections should just hop to another channel. And, moreover, it just works properly instantly when re-connecting. Therefore I think it's a software driver issue and I'd like to debug it. Is there any way to get more verbose logging on the Bluetooth(-hid) modules?

  Read the article

• Orchestrating the Virtual Enterprise, Part I

  - by Kathryn Perry

  A guest post by Jon Chorley, Oracle's Chief Sustainability Officer & Vice President, SCM Product Strategy During the American Industrial Revolution, the Ford Motor Company did it all. It turned raw materials into a showroom full of Model Ts. It owned a steel mill, a glass factory, and an automobile assembly line. The company was both self-sufficient and innovative and went on to become one of the largest and most profitable companies in the world. Nowadays, it's unusual for any business to follow this vertical integration model because its much harder to be best in class across such a wide a range of capabilities and services. Instead, businesses focus on their core competencies and outsource other business functions to specialized suppliers. They exchange vertical integration for collaboration. When done well, all parties benefit from this arrangement and the collaboration leads to the creation of an agile, lean and successful "virtual enterprise." Case in point: For Sun hardware, Oracle outsources most of its manufacturing and all of its logistics to third parties. These are vital activities, but ones where Oracle doesn't have a core competency, so we shift them to business partners who do. Within our enterprise, we always retain the core functions of product development, support, and most of the sales function, because that's what constitutes our core value to our customers. This is a perfect example of a virtual enterprise.  What are the implications of this? It means that we must exchange direct internal control for indirect external collaboration. This fundamentally changes the relative importance of different business processes, the boundaries of security and information sharing, and the relationship of the supply chain systems to the ERP. The challenge is that the systems required to support this virtual paradigm are still mired in "island enterprise" thinking. But help is at hand. Developments such as the Web, social networks, collaboration, and rules-based orchestration offer great potential to fundamentally re-architect supply chain systems to better support the virtual enterprise.  Supply Chain Management Systems in a Virtual Enterprise Historically enterprise software was constructed to automate the ERP - and then the supply chain systems extended the ERP. They were joined at the hip. In virtual enterprises, the supply chain system needs to be ERP agnostic, sitting above each of the ERPs that are distributed across the virtual enterprise - most of which are operating in other businesses. This is vital so that the supply chain system can manage the flow of material and the related information through the multiple enterprises. It has to have strong collaboration tools. It needs to be highly flexible. Users need to be able to see information that's coming from multiple sources and be able to react and respond to events across those sources.  Oracle Fusion Distributed Order Orchestration (DOO) is a perfect example of a supply chain system designed to operate in this virtual way. DOO embraces the idea that a company's fulfillment challenge is a distributed, multi-enterprise problem. It enables users to manage the process and the trading partners in a uniform way and deliver a consistent user experience while operating over a heterogeneous, virtual enterprise. This is a fundamental shift at the core of managing supply chains. It forces virtual enterprises to think architecturally about how best to construct their supply chain systems. In my next post, I will share examples of companies that have made that shift and talk more about the distributed orchestration process.

  Read the article

• Protecting Consolidated Data on Engineered Systems

  - by Steve Enevold

  In this time of reduced budgets and cost cutting measures in Federal, State and Local governments, the requirement to provide services continues to grow. Many agencies are looking at consolidating their infrastructure to reduce cost and meet budget goals. Oracle's engineered systems are ideal platforms for accomplishing these goals. These systems provide unparalleled performance that is ideal for running applications and databases that traditionally run on separate dedicated environments. However, putting multiple critical applications and databases in a single architecture makes security more critical. You are putting a concentrated set of sensitive data on a single system, making it a more tempting target.  The environments were previously separated by iron so now you need to provide assurance that one group, department, or application's information is not visible to other personnel or applications resident in the Exadata system. Administration of the environments requires formal separation of duties so an administrator of one application environment cannot view or negatively impact others. Also, these systems need to be in protected environments just like other critical production servers. They should be in a data center protected by physical controls, network firewalls, intrusion detection and prevention, etc Exadata also provides unique security benefits, including a reducing attack surface by minimizing packages and services to only those required. In addition to reducing the possible system areas someone may attempt to infiltrate, Exadata has the following features: 1.    Infiniband, which functions as a secure private backplane 2.    IPTables  to perform stateful packet inspection for all nodes               Cellwall implements firewall services on each cell using IPTables 3.    Hardware accelerated encryption for data at rest on storage cells Oracle is uniquely positioned to provide the security necessary for implementing Exadata because security has been a core focus since the company's beginning. In addition to the security capabilities inherent in Exadata, Oracle security products are all certified to run in an Exadata environment. Database Vault Oracle Database Vault helps organizations increase the security of existing applications and address regulatory mandates that call for separation-of-duties, least privilege and other preventive controls to ensure data integrity and data privacy. Oracle Database Vault proactively protects application data stored in the Oracle database from being accessed by privileged database users. A unique feature of Database Vault is the ability to segregate administrative tasks including when a command can be executed, or that the DBA can manage the health of the database and objects, but may not see the data Advanced Security  helps organizations comply with privacy and regulatory mandates by transparently encrypting all application data or specific sensitive columns, such as credit cards, social security numbers, or personally identifiable information (PII). By encrypting data at rest and whenever it leaves the database over the network or via backups, Oracle Advanced Security provides the most cost-effective solution for comprehensive data protection. Label Security  is a powerful and easy-to-use tool for classifying data and mediating access to data based on its classification. Designed to meet public-sector requirements for multi-level security and mandatory access control, Oracle Label Security provides a flexible framework that both government and commercial entities worldwide can use to manage access to data on a "need to know" basis in order to protect data privacy and achieve regulatory compliance  Data Masking reduces the threat of someone in the development org taking data that has been copied from production to the development environment for testing, upgrades, etc by irreversibly replacing the original sensitive data with fictitious data so that production data can be shared safely with IT developers or offshore business partners  Audit Vault and Database Firewall Oracle Audit Vault and Database Firewall serves as a critical detective and preventive control across multiple operating systems and database platforms to protect against the abuse of legitimate access to databases responsible for almost all data breaches and cyber attacks.  Consolidation, cost-savings, and performance can now be achieved without sacrificing security. The combination of built in protection and Oracle’s industry-leading data protection solutions make Exadata an ideal platform for Federal, State, and local governments and agencies.

  Read the article

• Cannot get Virtualbox to install properly on Ubuntu 12.04

  - by lopac1029

  I cannot get Virtualbox to install properly on my 12.04. I first went with a manual install for the .deb from the old builds section of the Virtualbox page. That .deb opened up the Software Center and installed. Then I got the error coming up of VT-x/AMD-V hardware acceleration is not available on your system. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot. which I can only assume was due to my Ubuntu version being 32-bit (System Details - Overview - OC type: 32-bit, right?) So I followed these instructions to remove the .deb manually, restarted my laptop, and then FOUND the actual Virtualbox install in the Software Center and installed from that (assuming it would give me the correct version I need for my system) So after all that (and then some), I'm still getting the same error when I connect to my new job's project in Virtualbox. Can anyone point me in the right direction of what to do here? This is the first time I've ever worked with Virtualbox, and no one at this company is using Ubuntu, so I'm on my own here. EDIT: Here is the direct info from running the 2 suggested commands Inspiron-1750-brick:~ $lscpu Architecture: i686 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 23 Stepping: 10 CPU MHz: 2100.000 BogoMIPS: 4189.45 L1d cache: 32K L1i cache: 32K L2 cache: 2048K Inspiron-1750-brick:~ $cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.80 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.45 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

  Read the article

• How to install Network Adapter Drivers for Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller (NDIS 6.20) Ubuntu 12.04

  - by Jessica Burnett

  How can I install drivers for 64-bit Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller (NDIS 6.20) for Ubuntu 12.04. I dual boot Windows7/Ubuntu 12.04 drivers work for 64-bit Windows 7. lspic -nn: 00:00.0 Host bridge [0600]: Intel Corporation Ivy Bridge DRAM Controller [8086:0154] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Ivy Bridge PCI Express Root Port [8086:0151] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation Panther Point USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation Panther Point MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation Panther Point High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1c.3 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 4 [8086:1e16] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Panther Point LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation Panther Point SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0de9] (rev a1) 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 08) 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2200 [8086:0891] (rev c4) 04:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30) 04:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30) 04:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 30) 04:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2394] (rev 30) sudo lshw -c network *-network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 version: 08 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list configuration: latency=0 resources: memory:d3a00000-d3a3ffff ioport:2000(size=128) *-network description: Wireless interface product: Centrino Wireless-N 2200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: c4 serial: 9c:4e:36:14:d4:7c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-23-generic firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:45 memory:d3900000-d3901fff I also tried Manually configuring wired connection. Nether wired or wireless connects

  Read the article

• How to generate xorg.conf? (X -configure segfaults)

  - by Nicolas Raoul

  My video card is working fine, I have no screen problem. I am trying to generate an xorg.conf so I did: [ Logout ] sudo service gdm stop [ Move away xorg.conf.back and xorg.conf.fglrx-0 that were in /etc/X11 ] sudo dpkg-reconfigure xserver-xorg sudo X -configure But this last command segfaults: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux nico 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=7447ab16-3406-442d-81e5-bb6a2d795205 ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 15 16:06:11 2010 List of video drivers: i740 ark geode siliconmotion mach64 s3 r128 apm intel neomagic vesa trident chips s3virge fglrx sis savage rendition i128 tseng ztv mga openchrome radeon ati nv v4l vmware cirrus tdfx nouveau sisusb voodoo fbdev (EE) Can't load FireGL DRM library (libfglrxdrm.so). Backtrace: 0: X (xorg_backtrace+0x3b) [0x80e938b] 1: X (0x8048000+0x61c8d) [0x80a9c8d] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x34d410] 3: X (xf86CallDriverProbe+0x182) [0x80b82d2] 4: X (DoConfigure+0x1c8) [0x816b898] 5: X (InitOutput+0x1da) [0x80b98aa] 6: X (0x8048000+0x1ebbb) [0x8066bbb] 7: /lib/tls/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0x467bd6] 8: X (0x8048000+0x1e961) [0x8066961] Segmentation fault at address (nil) Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Note the line Can't load FireGL DRM library (libfglrxdrm.so) Note: I do have file /usr/lib/fglrx/xorg/modules/linux/libfglrxdrm.so It is strange that it segfaults whereas I can use Gnome with no problem but well... Might be related: I tried to install the driver from ATI's website recently, and from then glxgears crashes at start. How can I generate xorg.conf in those conditions? It might or might not involve solving the segfault problem.

  Read the article

• Wireless Broadcom 4313 not working on Ubuntu 12.04

  - by user88568

  It seems a lot of people are having this problem, but none of the posted solutions have worked for me so far. My driver is installed and activated, I have tried removing and re-adding the network, and various other fixes. No networks were picked up on my first boot, the next day wireless worked fine, and since then it does not detect networks, and when I manually try to connect, it repeatedly asks for the password and does not connect. Here's my info: 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-00-a1-ff-ff-f3-70-f1 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac root@michelle-laptop:/home/michelle# ifconfig eth0 Link encap:Ethernet HWaddr 70:f1:a1:f3:ba:ab inet6 addr: fe80::72f1:a1ff:fef3:baab/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:29 TX packets:0 errors:30 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 eth1 Link encap:Ethernet HWaddr f0:4d:a2:53:83:7a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:104 errors:0 dropped:0 overruns:0 frame:0 TX packets:104 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8000 (8.0 KB) TX bytes:8000 (8.0 KB) root@michelle-laptop:/home/michelle# lsmod Module Size Used by dm_crypt 22528 0 snd_hda_codec_hdmi 31775 1 snd_hda_codec_realtek 174313 1 snd_hda_intel 32765 5 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 lib80211_crypt_tkip 17275 0 bnep 17830 2 rfcomm 38139 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq joydev 17393 0 wl 2646601 0 snd 62064 19 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd btusb 17912 0 bluetooth 158438 11 bnep,rfcomm,btusb uvcvideo 67203 0 videodev 86588 1 uvcvideo snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lib80211 14040 2 lib80211_crypt_tkip,wl intel_ips 17822 0 psmouse 72919 0 serio_raw 13027 0 mei 36570 0 dell_laptop 17767 0 dell_wmi 12601 0 dcdbas 14098 1 dell_laptop sparse_keymap 13658 1 dell_wmi mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid wmi 18744 1 dell_wmi i915 414817 3 atl1c 36718 0 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 root@michelle-laptop:/home/michelle# iwlist scan lo Interface doesn't support scanning. eth1 Interface doesn't support scanning. eth0 No scan results root@michelle-laptop:/home/michelle# rfkill list 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no Obviously I don't know what I'm doing. I'd appreciate any help! Thanks!

  Read the article

• Incomplete upgrade 12.04 to 12.10

  - by David

  Everything was running smoothly. Everything had been downloaded from Internet, packages had been installed and a prompt asked for some obsolete programs/files to be removed or kept. After that the computer crashed and and to manually force a shutdown. I turned it on again and surprise I was on 12.10! Still the upgrade was not finished! How can I properly finish that upgrade? Here's the output I got in the command line after following posted instructions: i astrill - Astrill VPN client software i dayjournal - Simple, minimal, digital journal. i gambas2-gb-form - A gambas native form component i gambas2-gb-gtk - The Gambas gtk component i gambas2-gb-gtk-ext - The Gambas extended gtk GUI component i gambas2-gb-gui - The graphical toolkit selector component i gambas2-gb-qt - The Gambas Qt GUI component i gambas2-gb-settings - Gambas utilities class i A gambas2-runtime - The Gambas runtime i google-chrome-stable - The web browser from Google i google-talkplugin - Google Talk Plugin i indicator-keylock - Indicator for Lock Keys i indicator-ubuntuone - Indicator for Ubuntu One synchronization s i A language-pack-kde-zh-hans - KDE translation updates for language Simpl i language-pack-kde-zh-hans-base - KDE translations for language Simplified C i libapt-inst1.4 - deb package format runtime library idA libattica0.3 - a Qt library that implements the Open Coll idA libbabl-0.0-0 - Dynamic, any to any, pixel format conversi idA libboost-filesystem1.46.1 - filesystem operations (portable paths, ite idA libboost-program-options1.46.1 - program options library for C++ idA libboost-python1.46.1 - Boost.Python Library idA libboost-regex1.46.1 - regular expression library for C++ i libboost-serialization1.46.1 - serialization library for C++ idA libboost-signals1.46.1 - managed signals and slots library for C++ idA libboost-system1.46.1 - Operating system (e.g. diagnostics support idA libboost-thread1.46.1 - portable C++ multi-threading i libcamel-1.2-29 - Evolution MIME message handling library i libcmis-0.2-0 - CMIS protocol client library i libcupsdriver1 - Common UNIX Printing System(tm) - Driver l i libdconf0 - simple configuration storage system - runt i libdvdcss2 - Simple foundation for reading DVDs - runti i libebackend-1.2-1 - Utility library for evolution data servers i libecal-1.2-10 - Client library for evolution calendars i libedata-cal-1.2-13 - Backend library for evolution calendars i libedataserver-1.2-15 - Utility library for evolution data servers i libexiv2-11 - EXIF/IPTC metadata manipulation library i libgdu-gtk0 - GTK+ standard dialog library for libgdu i libgdu0 - GObject based Disk Utility Library idA libgegl-0.0-0 - Generic Graphics Library idA libglew1.5 - The OpenGL Extension Wrangler - runtime en i libglew1.6 - OpenGL Extension Wrangler - runtime enviro i libglewmx1.6 - OpenGL Extension Wrangler - runtime enviro i libgnome-bluetooth8 - GNOME Bluetooth tools - support library i libgnomekbd7 - GNOME library to manage keyboard configura idA libgsoap1 - Runtime libraries for gSOAP i libgweather-3-0 - GWeather shared library i libimobiledevice2 - Library for communicating with the iPhone i libkdcraw20 - RAW picture decoding library i libkexiv2-10 - Qt like interface for the libexiv2 library i libkipi8 - library for apps that want to use kipi-plu i libkpathsea5 - TeX Live: path search library for TeX (run i libmagickcore4 - low-level image manipulation library i libmagickwand4 - image manipulation library i libmarblewidget13 - Marble globe widget library idA libmusicbrainz4-3 - Library to access the MusicBrainz.org data i libnepomukdatamanagement4 - Basic Nepomuk data manipulation interface i libnux-2.0-0 - Visual rendering toolkit for real-time app i libnux-2.0-common - Visual rendering toolkit for real-time app i libpoppler19 - PDF rendering library i libqt3-mt - Qt GUI Library (Threaded runtime version), i librhythmbox-core5 - support library for the rhythmbox music pl i libusbmuxd1 - USB multiplexor daemon for iPhone and iPod i libutouch-evemu1 - KernelInput Event Device Emulation Library i libutouch-frame1 - Touch Frame Library i libutouch-geis1 - Gesture engine interface support i libutouch-grail1 - Gesture Recognition And Instantiation Libr idA libx264-120 - x264 video coding library i libyajl1 - Yet Another JSON Library i linux-headers-3.2.0-29 - Header files related to Linux kernel versi i linux-headers-3.2.0-29-generic - Linux kernel headers for version 3.2.0 on i linux-image-3.2.0-29-generic - Linux kernel image for version 3.2.0 on 64 i mplayerthumbs - video thumbnail generator using mplayer i myunity - Unity configurator i A openoffice.org-calc - office productivity suite -- spreadsheet i A openoffice.org-writer - office productivity suite -- word processo i python-brlapi - Python bindings for BrlAPI i python-louis - Python bindings for liblouis i rts-bpp-dkms - rts-bpp driver in DKMS format. i system76-driver - Universal driver for System76 computers. i systemconfigurator - Unified Configuration API for Linux Instal i systemimager-client - Utilities for creating an image and upgrad i systemimager-common - Utilities and libraries common to both the i systemimager-initrd-template-am - SystemImager initrd template for amd64 cli i touchpad-indicator - An indicator for the touchpad i ubuntu-tweak - Ubuntu Tweak i A unity-lens-utilities - Unity Utilities lens i A unity-scope-calculator - Calculator engine i unity-scope-cities - Cities engine i unity-scope-rottentomatoes - Unity Scope Rottentomatoes

  Read the article

• Gartner PCC: A Shovel & Some Ah-Ha's

  - by kellsey.ruppel

  When Gartner Vice President and leading analyst Whit Andrews kicked off the Gartner Portals, Content & Collaboration Summit on Monday, March 12 at the Gaylord Palms in Orlando, FL by bringing a shovel to the stage, eyebrows raised and a few thoughts went through my head. Either this guy plans to go help the construction workers outside construct that new pool at the Gaylord or he took a wrong turn and is at the wrong conference. Oh and how did he get that shovel through airport security? As Whit explained more his objective became more clear…take everything anyone has ever told you about portals and throw it out the window, as portals have evolved and times they are most certainly changing. The future Web is here, available not only on browsers but also via a broad spectrum of access points, including automobiles, consumer electronics and more and more mobile devices. Not merely prevalent, the future Web is also multimedia-driven and operates in real time, driven by mobility, social media, streaming video and other dynamic services. Applications and user experiences are in the midst of an evolution — from the early, simple mobile Web models to today’s Web 2.0 mobile apps and, ultimately, to a world of predominantly Web apps. Additionally, cloud services will forever change how portals and user experience are designed, built, delivered, sourced and managed. So what does this mean for you? Today’s organizations need software that will enable them to not just do their jobs, but to do it in a way that is familiar and easy for them.  What does this mean for IT? Use software and technology as an enabler, not as a roadblock. Overall, we had a great week in Orlando learning about how to improve the user experience, manage content explosion, launch social initiatives, transition to mobile environments and understand cloud and SaaS options.  We had some great conversations throughout the conference and at the Oracle booth. Lots of demonstrations were given of Oracle WebCenter Sites and Oracle Social Network. And as Christie mentioned earlier this week, our Vice President of Product Management and Strategy for WebCenter Loren Weinberg presented on the topic of customer engagement and talked about how organization’s relationships with their customers have fundamentally changed today and the resulting impact that has on their priorities.  Loren also talked about the importance of customer engagement, why that matters now more than ever, and what you can do to help your company or organization succeed in this new world. The question asked in every keynote and session was a simple one: What is your “ah-ha” moment? I personally had quite a few, some of which I’ve captured below. 70% of internal social initiatives eventually fail. By 2014, refusing to communicate with consumers via social media will be as harmful as ignoring emails/phone calls is today. Customer engagement = multi-channel + social & interactive + personal & relevant + optimized. If people choose to talk about your product/company/service, it's because it's remarkable. -- Seth Godin's keynote (one of the highlights of the conference!) The Web will become the primary method used for delivering content and applications to mobile devices. By 2015, 20% of smart phone users worldwide will conduct commerce using context-enriched services on a weekly basis.  86% of customers will pay more for a better customer experience. 6 P's of Quality User Experience. Product. Enabled by: People, Patterns, Process, Profit, Priorities. Did you attend the Gartner Summit? What were your ah-ha moments?

  Read the article

< Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >