Search Results

Search found 12895 results on 516 pages for 'multi boot'.

Page 441/516 | < Previous Page | 437 438 439 440 441 442 443 444 445 446 447 448  | Next Page >

  • Ivy bridge i3 recognized as Xeon e3-1200

    - by user287072
    The situation: I've got a Ivy bridge i3 3225 which is being recognized as a Xeon e3-1200 series cpu by Ubuntu 14.04 64bit. The problem: cpu fan makes more noise than necessary (under dual-boot Win8 the fans are off), cannot install the intel graphics drivers from 01.org. Goals: - find a fix for the load fans could be they are not CPU related, I've tried some fan controller packages, but they made no difference. - get the intel graphics to install (this now fails as xeon cpu's are not supported, I got the package working on a i5 laptop) - get to know some more about how hardware recognition works Tried so far: - a reinstall of Ubuntu, but it was recognized again as a Xeon cpu. - different fan control packages, but they either do not recognized the fans, or just keep fan speed to high. Any pointers as how to get Ubuntu recognized it are more than welcome. lspci -nnQ 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.5 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 [8086:1e1a] (rev c4) 00:1c.6 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK106 [GeForce GTX 660] [10de:11c0] (rev a1) 01:00.1 Audio device [0403]: NVIDIA Corporation GK106 HDMI Audio Controller [10de:0e0b] (rev a1) 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09) 04:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 03)

    Read the article

  • Reading a ZFS USB drive with Mac OS X Mountain Lion

    - by Karim Berrah
    The problem: I'm using a MacBook, mainly with Solaris 11, but something with Mac OS X (ML). The only missing thing is that Mac OS X can't read my external ZFS based USB drive, where I store all my data. So, I decided to look for a solution. Possible solution: I decided to use VirtualBox with a Solaris 11 VM as a passthrough to my data. Here are the required steps: Installing a Solaris 11 VM Install VirtualBox on your Mac OS X, add the extension pack (needed for USB) Plug your ZFS based USB drive on your Mac, ignore it when asked to initialize it. Create a VM for Solaris (bridged network), and before installing it, create a USB filter (in the settings of your Vbox VM, go to Ports, then USB, then add a new USB filter from the attached device "grey usb-connector logo with green plus sign")  Install a Solaris 11 VM, boot it, and install the Guest addition check with "ifconfg -a" the IP address of your Solaris VM Creating a path to your ZFS USB drive In MacOS X, use the "Disk Utility" to unmount the USB attached drive, and unplug the USB device. Switch back to VirtualBox, select the top of the window where your Solaris 11 is running plug your ZFS USB drive, select "ignore" if Mac OS invite you to initialize the disk In the VirtualBox VM menu, go to "Devices" then "USB Devices" and select from the dropping menu your "USB device" Connection your Solaris VM to the USB drive Inside Solaris, you might now check that your device is accessible by using the "format" cli command If not, repeat previous steps Now, with root privilege, force a zpool import -f myusbdevicepoolname because this pool was created on another system check that you see your new pool with "zpool status" share your pool with NFS: share -F NFS /myusbdevicepoolname Accessing the USB ZFS drive from Mac OS X This is the easiest step: access an NFS share from mac OS Create a "ZFSdrive" folder on your MacOS desktop from a terminal under mac OS: mount -t nfs IPadressofMySoalrisVM:/myusbdevicepoolname  /Users/yourusername/Desktop/ZFSdrive et voila ! you might access your data, on a ZFS USB drive, directly from your Mountain Lion Desktop. You might play with the share rights in order to alter any read/write rights as needed. You might activate compression, encryption inside the Solaris 11 VM ...

    Read the article

  • Parallel Port Problem in 12.04

    - by Frank Oberle
    I have a “dumb” printer attached to a parallel port in my machine which works fine under the “other” resident operating system (from Redmond) on the same machine. I recently added Ubuntu 12.04 as a dual boot on the machine, but Ubuntu doesn't seem to recognize the parallel port at all. All I need to set up a printer is a really plain-vanilla fixed pitch text-only generic driver, which is present, but no parallel ports show up. (The other printers, all on USB ports, seem to work just fine). Following what appeared to me to be the most reasonable of the many conflicting pieces of advice on the web, here's what I did: I added the following lines to /etc/modules parport_pc ppdev parport Then, after rebooting, I checked to see that the lines were still present, and they were. I ran dmesg | grep par and got the following references in the output that seemed like they might have to do with the parallel port: [ 14.169511] parport_pc 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.169516] PCI parallel port detected: 9710:9805, I/O at 0xce00(0xcd00), IRQ 21 [ 14.169577] parport0: PC-style at 0xce00 (0xcd00), irq 21, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 14.354254] lp0: using parport0 (interrupt-driven). [ 14.571358] ppdev: user-space parallel port driver [ 16.588304] type=1400 audit(1347226670.386:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=964 comm="apparmor_parser" [ 16.588756] type=1400 audit(1347226670.386:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=964 comm="apparmor_parser" [ 16.673679] type=1400 audit(1347226670.470:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 16.675252] type=1400 audit(1347226670.470:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 16.675716] type=1400 audit(1347226670.470:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1014 comm="apparmor_parser" [ 16.676636] type=1400 audit(1347226670.474:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1015 comm="apparmor_parser" [ 16.677124] type=1400 audit(1347226670.474:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1015 comm="apparmor_parser" [ 1545.725328] parport0: ppdev0 forgot to release port I have no idea what any of that means, but the line “parport0: ppdev0 forgot to release port ” seems unusual. I was still unable to add a printer for my old clunker, so I tried the direct approach, typing echo “Hello” > /dev/lp0 and received a Permission denied message. I then tried echo “Hello” > /dev/parport0 which didn't give me any message at all, but still didn't print anything. Running the command sudo /usr/lib/cups/backend/parallel gives the following: direct parallel:/dev/lp0 "unknown" "LPT #1" "" "" Checking the permissions for /dev/parport0, Owner, Group, and Other are all set to read and write. crw-rw---- 1 root lp 6, 0 Sep 9 16:37 /dev/lp0 crw-rw-rw- 1 root lp 99, 0 Sep 9 16:37 /dev/parport0 The output of the command lpinfo -v includes the following line: direct parallel:/dev/lp0 I've read several web postings that seem to suggest this has been a problem for several years, but the bug reports were closed because there wasn't enough information to address the issue (shades of Microsoft!). Any suggestions as to what I might be missing here?

    Read the article

  • New Sample Demonstrating the Traversing of Tree Bindings

    - by Duncan Mills
    A technique that I seem to use a fair amount, particularly in the construction of dynamic UIs is the use of a ADF Tree Binding to encode a multi-level master-detail relationship which is then expressed in the UI in some kind of looping form – usually a series of nested af:iterators, rather than the conventional tree or treetable. This technique exploits two features of the treebinding. First the fact that an treebinding can return both a collectionModel as well as a treeModel, this collectionModel can be used directly by an iterator. Secondly that the “rows” returned by the collectionModel themselves contain an attribute called .children. This attribute in turn gives access to a collection of all the children of that node which can also be iterated over. Putting this together you can represent the data encoded into a tree binding in all sorts of ways. As an example I’ve put together a very simple sample based on the HT schema and uploaded it to the ADF Sample project. It produces this UI: The important code is shown here for a Region -> Country -> Location Hierachy: <af:iterator id="i1" value="#{bindings.AllRegions.collectionModel}" var="rgn"> <af:showDetailHeader text="#{rgn.RegionName}" disclosed="true" id="sdh1"> <af:iterator id="i2" value="#{rgn.children}" var="cnty">     <af:showDetailHeader text="#{cnty.CountryName}" disclosed="true" id="sdh2">       <af:iterator id="i3" value="#{cnty.children}" var="loc">         <af:panelList id="pl1">         <af:outputText value="#{loc.City}" id="ot3"/>           </af:panelList>         </af:iterator>       </af:showDetailHeader>     </af:iterator>   </af:showDetailHeader> </af:iterator>  You can download the entire sample from here:

    Read the article

  • Unable to ping inside or outside network with default gateway 0.0.0.0

    - by agentroadkill
    I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

    Read the article

  • Building a Solaris 11 repository without network connection

    - by user12611852
    Solaris 11 has been released and is a fantastic new iteration of Oracle's rock solid, enterprise operating system.  One of the great new features is the repository based Image Packaging system.  IPS not only introduces new cloud based package installation services, it is also integrated with our zones, boot environment and ZFS file systems to provide a safe, easy and fast way to perform system updates. My customers typically don't have network access and, in fact, can't connect to any network until they have "Authority to connect."  It's useful, however, to build up a Solaris 11 system with additional software using the new Image Packaging System and locally stored repository. The Solaris 11 documentation describes how to create a locally stored repository with full explanations of what the commands do. I'm simply providing the quick and dirty steps.  The easiest way is to download the ISO image, burn to a DVD and insert into your DVD drive.  Then as root: pkg set-publisher -G '*' -g file:///cdrom/sol11repo_full/repo solaris Now you can to install software using the GUI package manager or the pkg commands.  If you would like something more permanent (or don't have a DVD drive), however, it takes a little more work. After installing Solaris 11, download (on another system perhaps) the two files that make up the Solaris 11 repository from our download site Sneaker-net the files to your Solaris 11 system Unzip and cat the two files together to create one large ISO image. The file is about 6.9 GB in size zfs create rpool/export/repoSolaris11 zfs set atime=off rpool/export/repoSolaris11 zfs set compression=on rpool/export/repoSolaris11 (save some space) lofiadm -a sol-11-1111-repo-full.iso /dev/lofi/1 mount -F hsfs /dev/lofi/1 /mnt You could stop here and set the publisher to point to the /mnt/repo location, however, this mount will not be persistent across reboots. Copy the repository from the mounted ISO image to a permanent, on disk location. rsync -aP /mnt/repo /export/repoSolaris11 pkgrepo -s /export/repoSolaris11 refresh pkg set-publisher -G '*' -g /export/repoSolaris11/repo solaris You now have a locally installed repository for adding additional software packages for Solaris 11.  The documentation also takes you through publishing your repository on the network so that others can access it.

    Read the article

  • Hyper-V for Developers Part 1 Internal Networks

    Over the last year, weve been working with Microsoft to build training and demo content for the next version of Office Communications Server code-named Microsoft Communications Server 14.  This involved building multi-server demo environments in Hyper-V, getting them running on demo servers which we took to TechEd, PDC, and other training events, and sometimes connecting the demo servers to the show networks at those events.  ITPro stuff that should scare the hell out of a developer! It can get ugly when I occasionally have to venture into ITPro land.  Lets leave it at that. Having gone through this process about 10 to 15 times in the last year, I finally have it down.  This blog series is my attempt to put all that knowledge in one place if anything, so I can find it somewhere when I need it again.  Ill start with the most simple scenario and then build on top of it in future blog posts. If youre an ITPro, please resist the urge to laugh at how trivial this is. Internal Hyper-V Networks Lets start simple.  An internal network is one that intended only for the virtual machines that are going to be on that network it enables them to communicate with each other. Create an Internal Network On your host machine, fire up the Hyper-V Manager and click the Virtual Network Manager in the Actions panel. Select Internal and leave all the other default values. Give the virtual network a name, and leave all the other default values. After the virtual network is created, open the Network and Sharing Center and click Change Adapter Settings to see the list of network connections. The only thing I recommend that you do is to give this connection a friendly label, e.g. Hyper-V Internal.  When you have multiple networks and virtual networks on the host machines, this helps group the networks so you can easily differentiate them from each other.  Otherwise, dont touch it, only bad things can happen. Connect the Virtual Machines to the Internal Network Im assuming that you have more than 1 virtual machine already configured in Hyper-V, for example a Domain Controller, and Exchange Server, and a SharePoint Server. What you need to do is basically plug in the network to the virtual machine.  In order to do this, the machine needs to have a virtual network adapter.  If the VM doesnt have a network adapter, open the VMs Settings and click Add Hardware in the left pane.  Choose the virtual network to which to bind the adapter to. If you already have a virtual network adapter on the VM, simply connect it to the virtual network. Assign IP Addresses to the Virtual Machines on the Internal Network Open the Network and Sharing Center on your VM, there should only be 1 network at this time.  Open the Properties of the connection, select Internet Protocol Version 4 (TCP/IPv4) and hit Properties. In this environment, Im assigning IP addresses as 192.168.0.xxx.  This particular VM has an IP address of 192.168.0.40 with a subnet mask of 255.255.255.0, and a DNS Server of 192.168.0.18.  DNS is running on the Domain Controller VM which has an IP address of 192.168.0.18. Repeat this process on every VM in your environment, obviously assigning a unique IP address to each.  In an environment with a domain controller, you should now be able to ping the machines from each other. What Next? After completing this process, heres what you still cannot do: Access the internet from any of the VMs Remote desktop to a VM from the host Remote desktop to a VM over the network In the next post, well take a look configuring an External network adapter on the virtual machines.  Well then build on top of that so that you can RDP into the VMs from the host machine and over the network.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Ask the Readers: Which Browser is a Must-Have for You on Linux?

    - by Asian Angel
    Linux systems all come with their own particular set of default browsers, but those browsers may not be the ones you want or need. This week we would like to know which browser (or browsers) are considered “must-have” on your Linux systems. As a general rule many Linux distributions have Firefox and/or Konqueror as one of the default installation browsers. During this past year the open source browser Chromium has also been gaining a lot of traction as a default install for systems. For most people these browsers are the ones that they like best or feel work well enough to not make any changes. But there are other people who want more than what is available with a default system install. They may favor a particular browser for its’ extensibility or speed…others prefer a particular browser for its’ features or minimalist UI. Whatever your preferences may be, there is a browser out there to fit your style. Some people may even prefer to run only bleeding edge nightly releases or add them in with their current browsers. The important part is that you have choices when it comes to your Linux system. What we would like to know this week is which browser or browsers you make sure are always installed on your Linux systems. Does the Linux system you use already have your favorite browser installed as part of the default set? Maybe you are content with using the default set of browsers that come with the system. Or perhaps you prefer to rework the entire browser setup on your system by removing the defaults and adding your favorites. Let us know which browsers you consider “must have” and why in the comments! Note: You can make up to two selections on today’s poll since most people will likely have more than one browser that they make certain is always installed. How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC BotSync Enables Secure FTP File Synchronization on Android Devices Enjoy Beautiful City Views with the Cityscape Theme for Windows 7 Luigi Installs Any OS on Google’s Cr-48 Notebook DIY iPad Stylus Offers Pen-Based Interaction on the Cheap Serene Blue Ubuntu Wallpaper for Your Desktop Enjoy Old School Style Video Game Fun with Chicken Invaders

    Read the article

  • Brocken package manager due to incorrect Banshee package

    - by user54974
    Sup, so, I'm not familiar with linux at all so help is much appreciated. I've been trying to boot my pc up from a live CD unsuccessfully. I get to the stage at which there are the options to test without installing or install or so on where I select 'Install Ubuntu.' Here it relays through some fast DOS commands until it reaches 'end trace' and then, eventually, 'Killed.' I have already got a functional 11.10 version installed, could this be a problem? The reason I am attempting a reinstall is because the package system is damaged inside 11.10, a problem I can't seem to solve. If I try to install any new software from within the software centre it tells me that two banshee extensions must be removed. I try to remove these from inside the terminal, using apt-get remove, which results in:** You might want to run apt-get -f install to correct these: The following packages have unmet dependencies. banshee-extension-ubuntuonemusicstore : Depends: banshee (>= 2.2.1) but 2.2.0-1ubuntu2 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). The software centre suggests that I disable all third party repositories and run apt-get install -f I have done so but the package system remains damaged and apt-get install -fattempts to install banshee 2.2.1 but returns: Errors were encountered while processing: /var/cache/apt/archives/banshee_2.2.1-1ubuntu3_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I have also tried apt-get update (runs fine) and apt-get upgrade. The upgrade command apt-get upgrade results in: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. banshee-extension-soundmenu : Depends: banshee (>= 2.2.1) but 2.2.0-1ubuntu2 is installed banshee-extension-ubuntuonemusicstore : Depends: banshee (>= 2.2.1) but 2.2.0-1ubuntu2 is installed E: Unmet dependencies. Try using -f. I seem to be going round and round in circles here! If only I could reinstall successfully. Only proposed updates (oneiric proposed) is not enabled.

    Read the article

  • Why wifi doesn't work in this case?

    - by xRobot
    I have a brand new notebook where I have installed Windows 7 and Ubuntu 12.04 LTS 64bit in dual boot. In windows 7 wifi works but in Ubuntu not. Could you help me please ? iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off eth0 no wireless extensions. lshw -C network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 07 serial: b4:b5:1f:1b:9a:56 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:3000(size=256) memory:c2404000-c2404fff memory:c2400000-c2403fff *-network description: Wireless interface product: Ralink corp. vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 84:4b:f4:0a:3a:22 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.2.0-31-generic firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:c2500000-c250ffff lspci | grep -i net 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) 02:00.0 Network controller: Ralink corp. Device 539a iwlist scan lo Interface doesn't support scanning. wlan0 Interface doesn't support scanning : Device or resource busy eth0 Interface doesn't support scanning. lsmod Module Size Used by rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 224173 1 joydev 17693 0 hp_wmi 18092 0 sparse_keymap 13890 1 hp_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq psmouse 97362 0 snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device arc4 12529 2 rt2800pci 18715 0 rt2800lib 58925 1 rt2800pci crc_ccitt 12667 1 rt2800lib rt2x00pci 14577 1 rt2800pci rt2x00lib 51144 3 rt2800pci,rt2800lib,rt2x00pci mac80211 506816 3 rt2800lib,rt2x00pci,rt2x00lib soundcore 15091 1 snd mac_hid 13253 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev wmi 19256 1 hp_wmi i915 473240 3 cfg80211 205544 2 rt2x00lib,mac80211 eeprom_93cx6 12725 1 rt2800pci drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 serio_raw 13211 0 video 19596 1 i915 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid r8169 62099 0 rfkill list: # rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • Oracle Linux Hands-on Lab from your Home? Yes You Can Do That!

    - by Zeynep Koch
    We're taking the very popular OTN Sysadmin Days and going virtual! We have two days to choose from: Americas - Tuesday January 15th, 2013 9:00 a.m – 1:00 p.m. PT / 12:00 p.m. – 4:00 p.m. ET / 1:00 p.m. - 5:00 p.m. BRT EMEA -  Tuesday January 29th, 2013 - 9:00 a.m – 13:00 p.m GMT / 10:00 a.m – 14:00 p,m CET / 12:00 p.m – 16:00 p.m AST / 13:00 p.m – 17:00 p,m MSK / 14:30 p.m – 18:30 p.m IST You'll be able to perform real-world tasks with Oracle Linux and if you have questions you can ask for help from the Oracle experts through chat window. There's one caveat: you'll have to do a little homework ahead of time. Load the virtual images onto your laptop, find the instructions, and make sure everything is working properly. This wiki https://wikis.oracle.com/display/virtualsysadminday/Home explains what you need to do. If you have questions, ask them as comments to the wiki:https://wikis.oracle.com/display/virtualsysadminday/Home.  Oracle Linux Track  1. Oracle Linux Technology Overview - In this session we will go over the latest Oracle Linux features including tools for Linux administration such as the Unbreakable Linux Network (ULN) and public yum. We will also show you a demo of Ksplice zero downtime kernel updates, only available to Oracle Linux customers. You will see how easy it is to switch from Red Hat support to Oracle Linux support by using ULN. Last but not least, we’ll introduce the 3 hands-on labs that will follow this session in the Linux track. 2. HOL: Package Management -  In this lab session you will use the package management on Oracle Linux using RPM and yum. Some of the tasks that you will experience include listing installed packages, obtaining additional information about packages, searching for packages and installing/updating them as well as verifying package integrity and removing software. We’ll also review Linux services and run levels, how to start and stop them, checking the status of a particular service and enabling a service to be started automatically at system boot. 3. HOL: Storage Management - In this hands-on lab session, you will learn about storage management with LVM2, the Linux Logical Volume Manager, preparing block devices, creating physical and logical volumes, creating file systems on top of logical volumes, and resizing file systems dynamically. You will also practice setting up software RAID devices, configuring encrypted block devices.Btrfs File System - In this hands-on lab session, we will introduce you to Btrfs file system. You will be able to create and mount a Btrfs file system and learn to setup a mirrored/striped file system across multiple block devices. You’ll also learn how to add and remove block devices, and create file system snapshots. Register for this FREE event.

    Read the article

  • New PeopleSoft HCM 9.1 On Demand Standard Edition provides a complete set of IT services at a low, predictable monthly cost

    - by Robbin Velayedam
    At Oracle Open World last month, Oracle announced that we are extending our On Demand offerings with the general availability of PeopleSoft On Demand Standard Edition. Standard Edition represents Oracle’s commitment to providing customers a choice of solutions, technology, and deployment options commensurate with their business needs and future growth. The Standard Edition offering complements the traditional On Demand offerings (Enterprise and Professional Editions) by focusing on a low, predictable monthly cost model that scales with the size of your business.   As part of Oracle's open cloud strategy, customers can freely move PeopleSoft licensed applications between on premise and the various  on demand options as business needs arise.    In today’s business climate, aggressive and creative business objectives demand more of IT organizations. They are expected to provide technology-based solutions to streamline business processes, enable online collaboration and multi-tasking, facilitate data mining and storage, and enhance worker productivity. As IT budgets remain tight in a recovering economy, the challenge becomes how to meet these demands with limited time and resources. One way is to eliminate the variable costs of projects so that your team can focus on the high priority functions and better predict funding and resource needs two to three years out. Variable costs and changing priorities can derail the best laid project and capacity plans. The prime culprits of variable costs in any IT organization include disaster recovery, security breaches, technical support, and changes in business growth and priorities. Customers have an immediate need for solutions that are cheaper, predictable in cost, and flexible enough for long-term growth or capacity changes. The Standard Edition deployment option fulfills that need by allowing customers to take full advantage of the rich business functionality that is inherent to PeopleSoft HCM, while delegating all application management responsibility – such as future upgrades and product updates – to Oracle technology experts, at an affordable and expected price. Standard Edition provides the advantages of the secure Oracle On Demand hosted environment, the complete set of PeopleSoft HCM configurable business processes, and timely management of regular updates and enhancements to the application functionality and underlying technology. Standard Edition has a convenient monthly fee that is scalable by number of employees, which helps align the customer’s overall cost of ownership with its size and anticipated growth and business needs. In addition to providing PeopleSoft HCM applications' world class business functionality and Oracle On Demand's embassy-grade security, Oracle’s hosted solution distinguishes itself from competitors by offering customers the ability to transition between different deployment and service models at any point in the application ownership lifecycle. As our customers’ business and economic climates change, they are free to transition their applications back to on-premise at any time. HCM On Demand Standard Edition is based on configurability options rather than customizations, requiring no additional code to develop or maintain. This keeps the cost of ownership low and time to production less than a month on average. Oracle On Demand offers the highest standard of security and performance by leveraging a state-of-the-art data center with dedicated databases, servers, and secured URL all within a private cloud. Customers will not share databases, environments, platforms, or access portals with other customers because we value how mission critical your data are to your business. Oracle’s On Demand also provides a full breadth of disaster recovery services to provide customers the peace of mind that their data are secure and that backup operations are in place to keep their businesses up and running in the case of an emergency. Currently we have over 50 PeopleSoft customers delegating us with the management of their applications through Oracle On Demand. If you are a customer interested in learning more about the PeopleSoft HCM 9.1 Standard Edition and how it can help your organization minimize your variable IT costs and free up your resources to work on other business initiatives, contact Oracle or your Account Services Representative today.

    Read the article

  • Second Monitor stays black/in power save mode

    - by Rob
    I'm using two Monitors, a Belinea o.display 1 (Recognized as a Rogen Tech Distribution Inc 20" by Ubuntu, but working fine) on the DVI-Output (connected via DVI-to-VGA-adapter) as my primary Monitor and a Dell 19" (Recognized correctly) on the HDMI-output (via HDMI-to-DVI adapter) as secondary monitor. The graphics controller is a GeForce 9500 GS. I'm running a fully updated Ubuntu 13.04 with nouveau 1:1.0.7-0ubuntu1. The problem is that the second monitor (Dell) never seems to come out of standby during boot: the screen stays black and the status led on the monitor stays orange (it's green when it's on). It is correctly recognized an the size of the desktop is set accordingly, it just stays black. Changing any setting via xrandr/arandr/etc. does nothing. The on-screen-menu of the monitor reports it to be in power save mode. When using the proprietary NVIDIA-Drivers, the second monitor works just find. But these drivers cause a lot of other problems on my system, so i would really like to avoid them. On Ubuntu 12.10 i had found a workaround: When moving the relative position of the second monitor slightly down and the up again, it would turn on and function normally: xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x88 --rotate normal sleep 2 xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x0 --rotate normal This workaround stop working after the update to 13.04, and now i'm looking for a new solution. Has anyone experienced something similarity? xrandr output: Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192 DVI-I-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 433mm x 270mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.1 72.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 HDMI-1 connected 1280x1024+1680+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G96 [GeForce 9500 GS] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nouveau latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:df00(Größe=128) memory:fb000000-fb07ffff Thanks for your help!

    Read the article

  • The Growing Importance of Network Virtualization

    - by user12608550
    The Growing Importance of Network Virtualization We often focus on server virtualization when we discuss cloud computing, but just as often we neglect to consider some of the critical implications of that technology. The ability to create virtual environments (or VEs [1]) means that we can create, destroy, activate and deactivate, and more importantly, MOVE them around within the cloud infrastructure. This elasticity and mobility has profound implications for how network services are defined, managed, and used to provide cloud services. It's not just servers that benefit from virtualization, it's the network as well. Network virtualization is becoming a hot topic, and not just for discussion but for companies like Oracle and others who have recently acquired net virtualization companies [2,3]. But even before this topic became so prominent, Solaris engineers were working on technologies in Solaris 11 to virtualize network services, known as Project Crossbow [4]. And why is network virtualization so important? Because old assumptions about network devices, topology, and management must be re-examined in light of the self-service, elasticity, and resource sharing requirements of cloud computing infrastructures. Static, hierarchical network designs, and inter-system traffic flows, need to be reconsidered and quite likely re-architected to take advantage of new features like virtual NICs and switches, bandwidth control, load balancing, and traffic isolation. For example, traditional multi-tier Web services (Web server, App server, DB server) that share net traffic over Ethernet wires can now be virtualized and hosted on shared-resource systems that communicate within a larger server at system bus speeds, increasing performance and reducing wired network traffic. And virtualized traffic flows can be monitored and adjusted as needed to optimize network performance for dynamically changing cloud workloads. Additionally, as VEs come and go and move around in the cloud, static network configuration methods cannot easily accommodate the routing and addressing flexibility that VE mobility implies; virtualizing the network itself is a requirement. Oracle Solaris 11 [5] includes key network virtualization technologies needed to implement cloud computing infrastructures. It includes features for the creation and management of virtual NICs and switches, and for the allocation and control of the traffic flows among VEs [6]. Additionally it allows for both sharing and dedication of hardware components to network tasks, such as allocating specific CPUs and vNICs to VEs, and even protocol-specific management of traffic. So, have a look at your current network topology and management practices in view of evolving cloud computing technologies. And don't simply duplicate the physical architecture of servers and connections in a virtualized environment…rethink the traffic flows among VEs and how they can be optimized using Oracle Solaris 11 and other Oracle products and services. [1] I use the term "virtual environment" or VE here instead of the more commonly used "virtual machine" or VM, because not all virtualized operating system environments are full OS kernels under the control of a hypervisor…in other words, not all VEs are VMs. In particular, VEs include Oracle Solaris zones, as well as SPARC VMs (previously called LDoms), and x86-based Solaris and Linux VMs running under hypervisors such as OEL, Xen, KVM, or VMware. [2] Oracle follows VMware into network virtualization space with Xsigo purchase; http://www.mercurynews.com/business/ci_21191001/oracle-follows-vmware-into-network-virtualization-space-xsigo [3] Oracle Buys Xsigo; http://www.oracle.com/us/corporate/press/1721421 [4] Oracle Solaris 11 Networking Virtualization Technology, http://www.oracle.com/technetwork/server-storage/solaris11/technologies/networkvirtualization-312278.html [5] Oracle Solaris 11; http://www.oracle.com/us/products/servers-storage/solaris/solaris11/overview/index.html [6] For example, the Solaris 11 'dladm' command can be used to limit the bandwidth of a virtual NIC, as follows: dladm create-vnic -l net0 -p maxbw=100M vnic0

    Read the article

  • Framework for Everything - Where to begin? [Longer post]

    - by SquaredSoft
    Back story of this question, feel free to skip down for the specific question Hello, I've been very interested in the idea of abstract programming the last few years. I've made about 30 attempts at creating a piece of software that is capable of almost anything you throw at it. I've undertook some attempts at this that have taken upwards of a year, while getting close, never releasing it beyond my compiler. This has been something I've always tried wrapping my head around, and something is always missing. With the title, I'm sure you're assuming, "Yes of course you noob! You can't account for everything!" To which I have to reply, "Why not?" To give you some background into what I'm talking about, this all started with doing maybe a shade of gray hat SEO software. I found myself constantly having to create similar, but slightly different sets of code. I've gone through as many iterations of way to communicate on http as the universe has particles. "How many times am I going to have to write this multi-threaded class?" is something I found myself asking a lot. Sure, I could create a class library, and just work with that, but I always felt I could optimize what I had, which often was a large undertaking and typically involved frequent use of the CRTL+A keyboard shortcut, mixed with the delete button. It dawned on me that it was time to invest in a plugin system. This would allow me to simply add snippets of code. as time went on, and I could subversion stuff out, and distribute small chunks of code, rather than something that encompasses only a specific function or design. This comes with its own complexity, of course, and by the time I had finished the software scope for this addition, it hit me that I would want to add to everything in the software, not just a new http method, or automation code for a specific website. Great, we're getting more abstract. However, the software that I have in my mind comes down to a quite a few questions regarding its execution. I have to have some parameters to what I am going to do. After writing what the perfect software would do in my mind, I came up with this as a list of requirements: Should be able to use networking A "Macro" or "Expression system" which would allow people to do something like : =First(=ParseToList(=GetUrl("http://www.google.com?q=helloworld!"), Template.Google)) Multithreaded Able to add UI elements through some type of XML -- People can make their own addons etc. Can use third party API through the plugins, such as Microsoft CRM, Exchange, etc. This would allow the software to essentially be used for everything. Really, any task you wish to automate, in a simple way. Making the UI was as also extremely hard. How do you do all of this? Its very difficult. So my question: With so many attempts at this, I'm out of ideas how to successfully complete this. I have a very specific idea in my mind, but I keep failing to execute it. I'm a self taught programmer. I've been doing it for years, and work professionally in it, but I've never encountered something that would be as complex and in-depth as a system which essentially does everything. Where would you start? What are the best practices for design? How can I avoid constantly having to go back and optimize my software. What can I do to generalize this and draw everything out to completion. These are things I struggle with. P.s., I'm using c# as my main language. I feel like in this example, I might be hitting the outer limit of the language, although, I don't know if that is the case, or if I'm just a bad programmer. Thanks for your time.

    Read the article

  • Intern Screening - Software 'Quiz'

    - by Jeremy1026
    I am in charge of selecting a new software development intern for a company that I work with. I wanted to throw a little 'quiz' at the applicants before moving forth with interviews so as to weed out the group a little bit to find some people that can demonstrate some skill. I put together the following quiz to send to applicants, it focuses only on PHP, but that is because that is what about 95% of the work will be done in. I'm hoping to get some feedback on A. if its a good idea to send this to applicants and B. if it can be improved upon. # 1. FizzBuzz # Write a small application that does the following: # Counts from 1 to 100 # For multiples of 3 output "Fizz" # For multiples of 5 output "Buzz" # For multiples of 3 and 5 output "FizzBuzz" # For numbers that are not multiples of 3 nor 5 output the number. <?php ?> # 2. Arrays # Create a multi-dimensional array that contains # keys for 'id', 'lot', 'car_model', 'color', 'price'. # Insert three sets of data into the array. <?php ?> # 3. Comparisons # Without executing the code, tell if the expressions # below will return true or false. <?php if ((strpos("a","abcdefg")) == TRUE) echo "True"; else echo "False"; //True or False? if ((012 / 4) == 3) echo "True"; else echo "False"; //True or False? if (strcasecmp("abc","ABC") == 0) echo "True"; else echo "False"; //True or False? ?> # 4. Bug Checking # The code below is flawed. Fix it so that the code # runs properly without producing any Errors, Warnings # or Notices, and returns the proper value. <?php //Determine how many parts are needed to create a 3D pyramid. function find_3d_pyramid($rows) { //Loop through each row. for ($i = 0; $i < $rows; $i++) { $lastRow++; //Append the latest row to the running total. $total = $total + (pow($lastRow,3)); } //Return the total. return $total; } $i = 3; echo "A pyramid consisting of $i rows will have a total of ".find_3d_pyramid($i)." pieces."; ?> # 5. Quick Examples # Create a small example to complete the task # for each of the following problems. # Create an md5 hash of "Hello World"; # Replace all occurances of "_" with "-" in the string "Welcome_to_the_universe." # Get the current date and time, in the following format, YYYY/MM/DD HH:MM:SS AM/PM # Find the sum, average, and median of the following set of numbers. 1, 3, 5, 6, 7, 9, 10. # Randomly roll a six-sided die 5 times. Store the 5 rolls into an array. <?php ?>

    Read the article

  • Why I switch from Asana.com

    - by Anirudha
    Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/10/24/why-i-switch-from-asana.com.aspxI used Asana.com from 1-2 years. have nice experience to use it. it’s not so easy. When I started using it it’s make many confusion. Now I switch from it.   When I first time see I really didn’t understand how to make a private list. There is a icon on top click on it and make it private. After doing that I still not sure if this is working. There is a lot of confusion made that time. I discuss too much to figure out small small things. The UI is interesting but so hard to understand.  What I am looking for is just a list that I can hold private. I would like to share it only if I put them shared and put email address of person to hold them same list. Few days ago I see that My Win8 phone have a app that call Microsoft OneNote. The good thing of this MS app is that I can record my voice in the app. If someone want to make a list for future then he just need to say and this can be recorded.  This is awesome when you feel that Mobile keypad is just not so fast as a normal regular keyboard.   Google docs are another good option to handle this thing. Just make a word file and use it. share it with friend with many option. One best thing is this app have very simply UI then any other apps.   One more alternative is https://trello.com which you hear from joel on their blog http://www.joelonsoftware.com/items/2011/09/13.html There are many html5 and browser based, mobile based app. Many of them support multi platform feature. this means you can have them from PC to your Pocket. One good thing we all wanted is offline. if you are not online thing will be saved and push back to server when you will be online.   The biggest problem with some apps are they are attractive easy but hard to learn. Their one feature are not clearly defined what he does. This make frustration and confusion to user. When app are not simple to use people start stop trying to learn it. That’s all the problem I have with asana.com If you don’t want to try anything then what about Sticky Notes that is part of Windows 7. This app are still usable since you can store the text on it. If you know any good app to make a task list that provide access from tablet/mobile then put comment here. In the whole world of app there is a lot of app for doing this same thing differently. I mention few of them here. I hope this is nice to describe it.   Thanks for read my post.

    Read the article

  • django/python: is one view that handles two sibling models a good idea?

    - by clime
    I am using django multi-table inheritance: Video and Image are models derived from Media. I have implemented two views: video_list and image_list, which are just proxies to media_list. media_list returns images or videos (based on input parameter model) for a certain object, which can be of type Event, Member, or Crag. The view alters its behaviour based on input parameter action (better name would be mode), which can be of value "edit" or "view". The problem is that I need to ask whether the input parameter model contains Video or Image in media_list so that I can do the right thing. Similar condition is also in helper method media_edit_list that is called from the view. I don't particularly like it but the only alternative I can think of is to have separate (but almost the same) logic for video_list and image_list and then probably also separate helper methods for videos and images: video_edit_list, image_edit_list, video_view_list, image_view_list. So four functions instead of just two. That I like even less because the video functions would be very similar to the respective image functions. What do you recommend? Here is extract of relevant parts: http://pastebin.com/07t4bdza. I'll also paste the code here: #urls url(r'^media/images/(?P<rel_model_tag>(event|member|crag))/(?P<rel_object_id>\d+)/(?P<action>(view|edit))/$', views.image_list, name='image-list') url(r'^media/videos/(?P<rel_model_tag>(event|member|crag))/(?P<rel_object_id>\d+)/(?P<action>(view|edit))/$', views.video_list, name='video-list') #views def image_list(request, rel_model_tag, rel_object_id, mode): return media_list(request, Image, rel_model_tag, rel_object_id, mode) def video_list(request, rel_model_tag, rel_object_id, mode): return media_list(request, Video, rel_model_tag, rel_object_id, mode) def media_list(request, model, rel_model_tag, rel_object_id, mode): rel_model = tag_to_model(rel_model_tag) rel_object = get_object_or_404(rel_model, pk=rel_object_id) if model == Image: star_media = rel_object.star_image else: star_media = rel_object.star_video filter_params = {} if rel_model == Event: filter_params['event'] = rel_object_id elif rel_model == Member: filter_params['members'] = rel_object_id elif rel_model == Crag: filter_params['crag'] = rel_object_id media_list = model.objects.filter(~Q(id=star_media.id)).filter(**filter_params).order_by('date_added').all() context = { 'media_list': media_list, 'star_media': star_media, } if mode == 'edit': return media_edit_list(request, model, rel_model_tag, rel_object_id, context) return media_view_list(request, model, rel_model_tag, rel_object_id, context) def media_view_list(request, model, rel_model_tag, rel_object_id, context): if request.is_ajax(): context['base_template'] = 'boxes/base-lite.html' return render(request, 'media/list-items.html', context) def media_edit_list(request, model, rel_model_tag, rel_object_id, context): if model == Image: get_media_edit_record = get_image_edit_record else: get_media_edit_record = get_video_edit_record media_list = [get_media_edit_record(media, rel_model_tag, rel_object_id) for media in context['media_list']] if context['star_media']: star_media = get_media_edit_record(context['star_media'], rel_model_tag, rel_object_id) else: star_media = None json = simplejson.dumps({ 'star_media': star_media, 'media_list': media_list, }) return HttpResponse(json, content_type=json_response_mimetype(request)) def get_image_edit_record(image, rel_model_tag, rel_object_id): record = { 'url': image.image.url, 'name': image.title or image.filename, 'type': mimetypes.guess_type(image.image.path)[0] or 'image/png', 'thumbnailUrl': image.thumbnail_2.url, 'size': image.image.size, 'id': image.id, 'media_id': image.media_ptr.id, 'starUrl':reverse('image-star', kwargs={'image_id': image.id, 'rel_model_tag': rel_model_tag, 'rel_object_id': rel_object_id}), } return record def get_video_edit_record(video, rel_model_tag, rel_object_id): record = { 'url': video.embed_url, 'name': video.title or video.url, 'type': None, 'thumbnailUrl': video.thumbnail_2.url, 'size': None, 'id': video.id, 'media_id': video.media_ptr.id, 'starUrl': reverse('video-star', kwargs={'video_id': video.id, 'rel_model_tag': rel_model_tag, 'rel_object_id': rel_object_id}), } return record # models class Media(models.Model, WebModel): title = models.CharField('title', max_length=128, default='', db_index=True, blank=True) event = models.ForeignKey(Event, null=True, default=None, blank=True) crag = models.ForeignKey(Crag, null=True, default=None, blank=True) members = models.ManyToManyField(Member, blank=True) added_by = models.ForeignKey(Member, related_name='added_images') date_added = models.DateTimeField('date added', auto_now_add=True, null=True, default=None, editable=False) class Image(Media): image = ProcessedImageField(upload_to='uploads', processors=[ResizeToFit(width=1024, height=1024, upscale=False)], format='JPEG', options={'quality': 75}) thumbnail_1 = ImageSpecField(source='image', processors=[SmartResize(width=178, height=134)], format='JPEG', options={'quality': 75}) thumbnail_2 = ImageSpecField(source='image', #processors=[SmartResize(width=256, height=192)], processors=[ResizeToFit(height=164)], format='JPEG', options={'quality': 75}) class Video(Media): url = models.URLField('url', max_length=256, default='') embed_url = models.URLField('embed url', max_length=256, default='', blank=True) author = models.CharField('author', max_length=64, default='', blank=True) thumbnail = ProcessedImageField(upload_to='uploads', processors=[ResizeToFit(width=1024, height=1024, upscale=False)], format='JPEG', options={'quality': 75}, null=True, default=None, blank=True) thumbnail_1 = ImageSpecField(source='thumbnail', processors=[SmartResize(width=178, height=134)], format='JPEG', options={'quality': 75}) thumbnail_2 = ImageSpecField(source='thumbnail', #processors=[SmartResize(width=256, height=192)], processors=[ResizeToFit(height=164)], format='JPEG', options={'quality': 75}) class Crag(models.Model, WebModel): name = models.CharField('name', max_length=64, default='', db_index=True) normalized_name = models.CharField('normalized name', max_length=64, default='', editable=False) type = models.IntegerField('crag type', null=True, default=None, choices=crag_types) description = models.TextField('description', default='', blank=True) country = models.ForeignKey('country', null=True, default=None) #TODO: make this not null when db enables it latitude = models.FloatField('latitude', null=True, default=None) longitude = models.FloatField('longitude', null=True, default=None) location_index = FixedCharField('location index', length=24, default='', editable=False, db_index=True) # handled by db, used for marker clustering added_by = models.ForeignKey('member', null=True, default=None) #route_count = models.IntegerField('route count', null=True, default=None, editable=False) date_created = models.DateTimeField('date created', auto_now_add=True, null=True, default=None, editable=False) last_modified = models.DateTimeField('last modified', auto_now=True, null=True, default=None, editable=False) star_image = models.ForeignKey('Image', null=True, default=None, related_name='star_crags', on_delete=models.SET_NULL) star_video = models.ForeignKey('Video', null=True, default=None, related_name='star_crags', on_delete=models.SET_NULL)

    Read the article

  • kubuntu: wireless manager can't find any networks

    - by timuçin
    I just installed Kubuntu 12.10 and as I knew my wireless driver would not be recognized, I installed it manually through here. I suppose I shall mention that I also had to do this. The driver worked just fine until I restarted my system. Since then I can't even start over. My wireless card is realtek 8723 The oly lead I have is this piece of log: 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> wpa_supplicant started 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0) supports 4 scan SSIDs 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): supplicant interface state: starting -> ready 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <warn> Trying to remove a non-existant call id. 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): supplicant interface state: ready -> inactive 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0) supports 4 scan SSIDs I feel really bad that I have been trying so many things and even while I am trying them I get a problem at every step. I am really frustrated. You can the time in the logs, I didn't get up early. Just needed to share my feelings. Even the ethernet cable I have use is short for God's sake, I have had to sit at this massively uncomfortable posture for hours. edit: I discovered something interesting. When I boot my windows I see that my wireless manager says "disconnected" now. However when I start ubuntu after windows and modprobe rtl8723e wireless works just fine. Then again, when I restart ubuntu I am back where I have started. So now I have to start windows, restart my machine and do the modprobe thing to see wireless networks.

    Read the article

  • Why can't Ubuntu find an ext3 filesystem on my hard-drive?

    - by urig
    This question is related to this question: Not enough components to start the RAID array? I'm trying to retrieve data from a "Western Digital MyBook World Edition (white light)" NAS device. This is basically an embedded Linux box with a 1TB HDD in it formatted in ext3. It stopped booting one day for no apparent reason. I have extracted the HDD from the NAS device and installed it in a desktop machine running Ubuntu 10.10 in the hope of accessing the files on the drive. I have followed instructions in this forum post, intended to mount the drive through Terminal: http://mybookworld.wikidot.com/forum/t-90514/how-to-recover-data-from-wd-my-book-world-edition-nas-device#post-976452 I have identified the partition that I want to mount and recover files from as /dev/sd4 by running "fdisk -l" and getting this: Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001cf00 Device Boot Start End Blocks Id System /dev/sdb1 5 248 1959930 fd Linux raid autodetect /dev/sdb2 249 280 257040 fd Linux raid autodetect /dev/sdb3 281 403 987997+ fd Linux raid autodetect /dev/sdb4 404 121601 973522935 fd Linux raid autodetect// When I try to mount using: "mount -t ext3 /dev/sdb4 /media/xyz" I get the following error: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so And "dmesg | tail" shows me: [ 15.184757] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 15.986859] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 15.988379] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 16.353379] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 16.705944] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 16.705951] tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX [ 16.706102] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.125673] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 27.600012] eth0: no IPv6 routers present [ 373.478031] EXT3-fs (sdb4): error: can't find ext3 filesystem on dev sdb4. I guess that last line is the punch line :) Why can't it find the ext3 filesystem on my drive? What do I need to do to mount this partition and copy its contents? Does it have anything to do with the drive being part of a RAID Array (see question mentioned above)? Many thanks to any who can help.

    Read the article

  • 'Unable to mount Filesystem' Error

    - by Charles
    Trying to extract data from a 'bricked' Western Digital MyBook Live 2tb drive. I came across a forum that advised to use Ubuntu (booted from a CD) on my Macbook. Managed to download and create a boot CD for Ubuntu (like this little operating system btw). Booted the machine with the CD and plugged the drive (which I had extracted from it's casing and placed into a external USB SATA case & plugged to the laptop). The drive is seen by Ubuntu but each time I click on the drive, it gives me the following error: Unable to mount 2.0 TB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog -try dmesg | tail or so I am new to this and spent quite some time searching this site to see if I could find a solution to this problem without troubling anyone. I came up with a few that came close but some of the questioners mentioned that they had lost data...which scared me from going further. I need to basically extract 1 particular folder from the drive. If I can get to mount this volume 'sdb4', there is a folder called 'My_Work' which I need to back up. The rest I have/had a copy of. When I typed in dmesg | tail...I got several lines..but I think ones that are relevant are: [ 406.864677] EXT4-fs (sdb4): bad block size 65536 [ 429.098776] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only [ 439.786365] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only [ 445.982692] EXT4-fs (sdb4): bad block size 65536 [ 1565.841690] EXT4-fs (sdb4): bad block size 65536 I read somewhere to try/check 'sudo fdisk -l /dev/sdb4'. It gave me the following result: Disk /dev/sdb44: 1995.8 GB, 1995774623744 bytes 255 heads, 63 sectors/track, 242639 cylinders, total 3897997312 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdb4 doesn't contain a valid partition table This is where I reached and got frustrated and decided to try & get help on this without digging myself deeper into a hole! I understand that the answer may already be out there. If so, could someone please point me in the right direction. And if not, could someone please resolve (if possible) my situation!

    Read the article

  • Profiling Startup Of VS2012 &ndash; JustTrace Profiler

    - by Alois Kraus
    JustTrace is made by Telerik which is mainly known for its collection of UI controls. The current version (2012.3.1127.0) does include a performance and memory profiler which does cost 614€ and is currently with a special offer for 306€ on sale. It does include one year of free upgrades. The uneven € numbers are calculated from the 799€ and 50% dicsount price. The UI is already in Metro style and simple to use. Multi process, attach, method recording filter are not supported. It looks like JustTrace is like Ants a Just My Code profiler. For stuff where you do not have the pdbs or you want to dig deeper into the BCL code you will not get far. After getting the profile data you get in the All Methods grid a plain list with hit count and own time. The method list for all methods is also suspiciously short which is a clear sign that you will not get far during the analysis of foreign code. But at least there is also a memory profiler included. For this I have to choose in the first window for Profiling Type “Memory Profiler” to check the memory consumption of VS.  There are some interesting number to see but I do really miss from YourKit the thread stack window. How am I supposed to get a clue when much memory is allocated and the CPU consumption is high in which places I should look? The Snapshot summary gives a rough overview which is ok for a first impression. Next is Assemblies? This gives you a list of all loaded assemblies. Not terribly useful.   The By Type view gives you exactly what it is supposed to do. You have to keep in mind that this list is filtered by the types you did check in the Assemblies list. The By Type instance list does only show types from assemblies which do not originate from Microsoft. By default mscorlib and System are not checked. That is the reason why for the first time my By Type window looked like The idea behind this feature is to show only your instances because you are ultimately responsible for the overall memory consumption. I am not sure if I do like this feature because by default it does hide too much. I do want to see at least how many strings and arrays are allocated. A simple namespace filter would also do it in my opinion. Now you can examine all string instances and look who in the object graph does keep a reference on them. That is nice but YourKit has the big plus that you can also look into the string contents.  I am also not sure how in the graph cycles are visualized and what will happen if you have thousands of objects referencing you. That's pretty much it about JustTrace. It can help the average developer to pinpoint performance and memory issues by just looking at his own code and instances. Showing them more will not help them because the sheer amount of information will overwhelm them. And you need to have a pretty good understanding how the GC and the CLR does work. When you have a performance issue at a customer machine it is sometimes very helpful to be able a bring a profiler onto the machine (no pdbs, …) and to get a full snapshot of all processes which are in the problematic use case involved. For these more advanced use cased JustTrace is certainly the wrong tool. Next: SpeedTrace

    Read the article

  • Ubuntu 12.4.1 failing in vm both Vbox and Vmware on new HP Envy 4t-1000

    - by Chas
    Brand new to Linux, getting frustrated trying to get an environment up with Ubuntu. My primary goal is to learn Linux and Apache/PHP development. I need to keep my Windows OS as main on my machine for work, so i'm trying to virtualize Ubuntu 12.4.1 without luck (many attempts). I have a new HP Envy 4t-1000 with 16gb ram, and 32 gb ssd caching with 500gb spindle hard drive. Graphics card is an Intel HD 3000 with AMD Radeon 7670M. With installing Ubuntu desktop in VBox, I'm getting this result: https://forums.virtualbox.org/viewtopic.php?f=6&t=51939 With VMware workstation 7 (patched), I complete the install of Ubuntu, it reboots, purple desktop briefly flashes then it drops to command line. I bought a beginning Ubuntu book, and it recommends trying to manually configure graphics if this happens. So I tried doing a safe boot holding shift - I get to the first screen (GRUB) loads fine, and I choose recovery mode. After choosing the recovery mode, I get the recovery mode options, and can arrow down to what the book suggests 'Run in fail safe graphic mode.' Once I select this option, I get a black screen with a large white dialogue box, at the top it says "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Then there is an ok button way down at the bottom. When I select 'ok' I get a menu for a few options, book recommended 'reconfigure graphics.' When I try this, I get a menu of two options: 1) "Use generic (default) configuration or 2) use backup. I've tried both options several times, hitting ok just refreshes screen and nothing more. Rebooting at this point just goes back to command line as before. I don't know what to do at this point, I've spent too many hours this weekend trying in both VBox and VMware to get Ubuntu going. Isn't there like a very basic graphic display or something I can use to at least get into the desktop? I explored the GRUB some more, and tried to look at the startup and xserver logs - both are blank. No help there I guess? When I try to choose 'Edit the configuration file, then 'ok' screen just refreshes on same menu options, nothing happens. thx for any advice. I really need to focus on learning Linux, Apache and PHP, so perhaps Ubuntu just won't work on my hardware? Any other suggestions? I will need to virtualize - THANKS for any help/advice.

    Read the article

  • Is Visual Source Safe (The latest Version) really that bad? Why? What's the Best Alternative? Why? [closed]

    - by hanzolo
    Over the years I've constantly heard horror stories, had people say "Real Programmers Dont Use VSS", and so on. BUT, then in the workplace I've worked at two companies, one, a very well known public facing high traffic website, and another high end Financial Services "Web-Based" hosted solution catering to some very large, very well known companies, which is where I currently Reside and everything's working just fine (KNOCK KNOCK!!). I'm constantly interfacing with EXTREMELY Old technology with some of these financial institutions.. OLD LIKE YOU WOULDN'T BELIEVE.. which leads me to the conclusion that if it works "LEAVE IT", and that maybe there's some value in old technology? at least enough value to overrule a rewrite!? right?? Is there something fundamentally flawed with the underlying technology that VSS uses? I have a feeling that if i said "someone said VSS Sucks" they would beg to differ, most likely give me this look like i dont know -ish, and I'd never gain back their respect and my credibility (well, that'll be hard to blow.. lol), BUT, give me an argument that I can take to someone whose been coding for 30 years, that builds Platforms that leverage current technology (.NET 3.5 / SQL 2008 R2 ), write's their own ORM with scaffolding and is able to provide a quality platform that supports thousands of concurrent users on a multi-tenant hosted solution, and does not agree with any benefits from having Source Control Integrated, and yet uses the Infamous Visual Source Safe. I have extensive experience with TFS up to 2010, and honestly I think it's great when a team (beyond developers) can embrace it. I've worked side by side with someone whose a die hard SVN'r and from a purist standpoint, I see the beauty in it (I need a bit more, out of my SS, but it surely suffices). So, why are such smarties not running away from Visual Source Safe? surely if it was so bad, it would've have been realized by now, and I would not be sitting here with this simple old, Check In, Check Out, Version Resistant, Label Intensive system. But here I am... I would love to drop an argument that would be the end all argument, but if it's a matter of opinion and personal experience, there seems to be too much leeway for keeping VSS. UPDATE: I guess the best case is to have the VSS supporters check other people's experiences and draw from that until we (please no) experience the breaking factor ourselves. Until then, i wont be engaging in a discussion to migrate off of VSS.. UPDATE 11-2012: So i was able to convince everyone at my work place that since MS is sun downing Visual Source Safe it might be time to migrate over to TFS. I was able to convince them and have recently upgraded our team to Visual Studio 2012 and TFS 2012. The migration was fairly painless, had to run analyze.exe which found a bunch of errors (not sure they'll ever affect the project) and then manually run the VSSConverter.exe. Again, painless, except it took 16 hours to migrate 5 years worth of everything.. and now we're on TFS.. much more integrated.. much more cooler.. so all in all, VSS served it's purpose for years without hick-up. There were no horror stories and Visual Source Save as source control worked just fine. so to all the nay sayers (me included). there's nothing wrong with using VSS. i wouldnt start a new project with it, and i would definitely consider migrating to TFS. (it's really not super difficult and a new "wizard" type converter is due out any day now so migrating should be painless). But from my experience, it worked just fine and got the job done.

    Read the article

  • vga_switcheroo and Intel HD 3000 on Ubuntu 12.04

    - by Ikalou
    I'm trying to get vga_switcheroo to enable my integrated Intel HD 3000 instead of my ATI card. My problem is that there is no vgaswitcheroo directory in /sys/kernel/debug/ on my system. > grep -i switcheroo /boot/config-3.2.0-26-generic CONFIG_VGA_SWITCHEROO=y And yet: > sudo ls /sys/kernel/debug/ acpi bdi bluetooth dri extfrag gpio ieee80211 kprobes mce mmc0 regmap regulator sched_features suspend_stats tracing usb wakeup_sources x86 I am NOT using the fglrx driver. Here is the output of lspci; glxinfo | grep renderer: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Seymour [Radeon HD 6400M Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Caicos HDMI Audio [Radeon HD 6400 Series] 24:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (rev 30) 24:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 24:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 25:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 26:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) OpenGL renderer string: Gallium 0.4 on AMD CAICOS Both xserver-xorg-video-intel and xserver-xorg-video-radeon packages are installed. I know there are tons of posts about hybrid-graphics already but I couldn't quite find a solution to my problem. Does anyone know why is /sys/kernel/debug/vgaswitcheroo not showing?

    Read the article

< Previous Page | 437 438 439 440 441 442 443 444 445 446 447 448  | Next Page >