Search Results

Search found 19953 results on 799 pages for 'post get'.

Page 439/799 | < Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >

  • Have there been attempts to make object containers that search for valid programs by auto wiring compatible components?

    - by Aaron Anodide
    I hope this post isn't too "Fringe" - I'm sure someone will just kill it if it is :) Three things made me want to reach out about this now: Decoupling is so in the forefront of design. TDD inspires the idea that it doesn't matter how a program comes to exist as long as it works. Seeing how often the adapter pattern is applied to achieve (1). I'm almost sure this has been tried from a memory of reading about it around the year 2000 or so. If I had to guess, it was maybe about and earlier version of the Java Spring framework. At this time we were not so far from days when the belief was that computer programs could exhibit useful emergent behavior. I think the article said it didn't work, but it didn't say it was impossible. I wonder if since then it has been deemed impossible or simply an illusion due to a false assumption of similarity between a brain and a CPU. I know this illusion existed because I had an internship in 1996 where I programmed neural nets that were supposedly going to exhibit "brain damage". STILL, after all that, I'm sitting around this morning and not able to shake the idea that it should be possible to have a method of programming to allow autonomous components to find each other, attempt to collaborate and their outputs evaluated against a set desired results.

    Read the article

  • FreePBX: Asterisk in the Cloud (EC2) Audio Problems

    - by neezer
    Please pardon the newbie question, but I can't seem to figure this out. I followed the Voxilla's tut to the tee: http://voxilla.com/2009/10/15/voxill...p-by-step-1457 But in making calls, my softphones connect, yet no audio (in either direction). I know from poking around the forums that this is generally caused by two factors: NAT and audio codecs. I (being new to the arena), however, don't know which. I believe I have Asterisk and the clients restricted to just ulaw, and I also believe I have the correct ports open, and my externip set correctly (I think the Voxilla AMI does this automatically, since it's in the cloud). I'm a bit lost. I'd be happy to post whatever configuration files that might help, provided you tell me where they are on the filesystem. But like I said before, this is effectively a vanilla install of Voxilla's own FreePBX AMI. I'd appreciate any help or guidance here. Thanks!

    Read the article

  • Need Help Hiring a Perfectionist Programmer [closed]

    - by Bryan Hadaway
    I understand my question may be in the gray area, but I'm not able to use the Meta to ask if this question is appropriate or not so I'll simply have to risk it. My project is complete in the sense that it's a fully functional, ready to go 1.0 version. However, that's not good enough for my standards. My expertise is in HTML/CSS, not jQuery and PHP. I'm looking for someone to refine every character of my code for quality, speed, security and compatibility. I want everything to be as bug free as possible for launch. So I need an expert programmer who's a perfectionist in their coding who cares about the quality of their work (not just making it work) to review and refine my code. I'm sure I can't outright post the project's details and hope for interested parties to contact me as that wouldn't be beneficial to the community so instead I'm looking for advice from programmers about where some of best places to hire quality programmers are and the best strategies to hire the right programmer. In other words, screening applicants off of craigslist isn't going to cut it for this project. Thanks

    Read the article

  • Facing gestures in Linux mint Chrome Browser

    - by aravind.udayashankara
    I am using Linux mint OS since an Year , I use to consistently download updates and install , I use chrome as a default browser , when ever I open youtube and watch some video , I listen to some gestures in sound ( say repeated lyrics of song ) while it is playing , In firefox it is working fine . What is the problem am I missing any plugin , AFAIK Chrome doesn't need a flash player plug in , It has a built in flash player . IS that the problem ? And also previously I was not facing this , recently I started using Cinimon UI centOS after this all these kind of problems started MY hard ware is 64 bit intel core i3 and also I have installed linux mint 64 bit Please let me know what is the problem and how to fix this . Thanks in advance for responding to this post

    Read the article

  • Explorer image thumbnails are grey/incomplete/partial

    - by Craig620
    I have recently noticed a problem on my Win7 x64 Home machine. When navigating the pictures library, I run across a fair amount of thumbnails that are grey and only partially rendered. This is not not the absence of thumbnails caused by "always show icons, never thumbnails" checkbox, and is a local drive, have seen many other posts for those issues... I've run cleanmgr for thumbnails, and also manually deleted the .db files from %LOCALAPPADAT%\Microsoft\Windows\Explorer. That did actually fix one thumbnail once (while preparing this post) but in general it doesn't work. Why do specialized imaging programs not have this problem, but Explorer does? How do you fix Explorer? It's very annoying!

    Read the article

  • How to Install WebLogic 12c ZIP on Linux

    - by Bruno.Borges
    I knew that WebLogic had this small ZIP distribution, of only 184M, but what I didn't know was that it is so easy to install it on Linux machines, specially for development purposes, that I thought I had to blog about it. You may want to check this blog, where I found the missing part on this how to, but I'm blogging this again because I wanted to put it in a simpler way, straight to the point. And if you are looking for a how to for Mac, check Arun Gupta's post.  So, here's the step-by-step: 1 - Download the ZIP distribution (don't worry if your system is x86_64)Don't forget to accept the OTN Free Developer License Agreement! 2 - Choose where to install your WebLogic server and your domain, and set as your MW_HOME environment variableI will use /opt/middleware/weblogic for this how to export MW_HOME=/opt/middleware/weblogicMake sure this path exists in your system. 'mydomains' will be used to keep your WebLogic domain. mkdir -p $MW_HOME/mydomain 3 - If you don't have your JAVA_HOME environment variable still configured, do it. Point it to where your JDK is installed. export JAVA_HOME=/usr/lib/jvm/default-java 4 - Unzip the downloaded file into MW_HOME unzip wls1211_dev.zip -d $MW_HOME 5 - Go to that directory and run configure.sh cd $MW_HOME ./configure.sh 6 - Call the setEnvs.sh script . $MW_HOME/wlserver/server/bin/setWLSEnv.sh7 - Create your development domain. It will ask you for username and password. I like to use weblogic / welcome1cd $MW_HOME/mydomain $JAVA_HOME/bin/java $JAVA_OPTIONS -Xmx1024m \ -Dweblogic.management.allowPasswordEcho=true weblogic.Server8 - Start WebLogic and access its web console(sh startWebLogic.sh &); sleep 10; firefox http://localhost:7001/consoleUsually, it takes only 10 seconds to start a domain, and 5 more to deploy the Administration Console (on my laptop). :-)Enjoy!

    Read the article

  • FreePBX: Asterisk in the Cloud (EC2) Audio Problems

    - by neezer
    Please pardon the newbie question, but I can't seem to figure this out. I followed the Voxilla's tut to the tee: http://voxilla.com/2009/10/15/voxill...p-by-step-1457 But in making calls, my softphones connect, yet no audio (in either direction). I know from poking around the forums that this is generally caused by two factors: NAT and audio codecs. I (being new to the arena), however, don't know which. I believe I have Asterisk and the clients restricted to just ulaw, and I also believe I have the correct ports open, and my externip set correctly (I think the Voxilla AMI does this automatically, since it's in the cloud). I'm a bit lost. I'd be happy to post whatever configuration files that might help, provided you tell me where they are on the filesystem. But like I said before, this is effectively a vanilla install of Voxilla's own FreePBX AMI. I'd appreciate any help or guidance here. Thanks!

    Read the article

  • Lost support for Web Access on Verizon BlackBerry World Edition

    - by Jimsmithkka
    Hello all, I believe that some silliness has occurred with my blackberry after a OS upgrade. I have 2010 Blackberry world edition phone, purchased off a friend who went iPhone, that at first worked with web on the Verizon network. When i connected it to my PC to transfer contacts, it prompted for an OS upgrade, which I performed. Post-Upgrade I have found that i can no longer access any of the web services: eg. AppWorld, Email, Twitter, Browser. And they all state that i need to upgrade my account to gain access. I had a Storm previous to this that worked fine, and at the VZ store they told me this device is no longer supported (new in 2010 though), and they got me a free "upgrade" to the Blackberry flip. What i could use help with is finding a source stating it is discontinued or a guide that will help me re-enable the web features. I can provide further info later if needed (currently at work with the flip, the WorldEdition is at home).

    Read the article

  • FTP Logs in IIS 7.5

    - by Jacob84
    I know this is weird, but the thruth is that I can't find the FTP logs in one IIS 7.5 Server. In the IIS Management Console, I've gone to the server, click on FTP Logging that appears inside FTP group (with other options like FTP Messages and FTP Request filtering). Seems that the configured folder for logs is: C:\InetPubFolder\logs\LogFiles If I go there, I can find a lot of folders with the structure W3SVC#, where # it's a number. They all contain logs, but they are HTTP logs, plenty of GET and POST verbs. Am I missing something? The server contains a lot of domains and It's hard to find.

    Read the article

  • Monitor ESXi hosts with Nagios

    - by Kyle Brandt
    Does anyone recommend any methods for monitoring ESXi 4.1 hosts with Nagios? I have looked into SNMP but it seems to be in a pretty sorry state. Net-SNMP does not seem to be included and there is a built it SNMP daemon that I set up. However from the standard MIBs there only seems to really be network interface counters and the VMWare MIBs seem quite useless. Right now I am considering SNMP for the interface speed and trying the plugins listed at http://unimpressed.org/post/96949609/monitoring-esxi-performance-through-nagios . Anyone have a better idea? I would like to monitor the hosts directly, not through something like vCenter.

    Read the article

  • How to restrict HTTP Methods

    - by hemalshah
    How can I restrict HTTP methods to those required by the MOSS07 application(s) using IIS6? Update This is what was written in the document IIS6 should be used to restrict HTTP methods to those required by the MOSS07 application(s). I also searched some books and saw something curious in O'Reilly's Sharepoint 2007 by James Pyles and others. There is no real suppported way to use HTTP POST and HTTP GET because of the web.config settings and the static definition of the WSDL. In the web.config <protocols> <remove name="HttpGet"> <remove name="HttpPost"> <remove name="HttpPostLocalHost"> <add name="Documentation"> </protocols> If we do this in the Web.Config file, would it solve the problem?

    Read the article

  • Macbook Drivers for Windows 7

    - by Kaan
    I have a hard drive which I removed from my HP Laptop and plugged into my Macbook. Windows 7 started well and then installed graphic driver but the others (sound, touchpad) were not recognized by the operating system. What should I do? Edit from OP Sorry for writing here. I don't know why but my account is not associated with this post. First, I have Tiger CD but problem is neigher my Macbook, nor my Desktop PC can read the CD. I have downloaded Driver's from Apple (http://support.apple.com/kb/DL74) but it's not working. I mean, when I double click the exe file, It gets listed in process list int task manager but after 5 seconds, I disappears. But somehow, Windows recognized my audio device and installed its driver. Microphone is ok but red light is on.

    Read the article

  • Setting up a software company...

    - by ThePower
    Hi all, I am a Software Engineer who wants to start developing and selling a range of products. I have some in depth ideas that I would like to go on to develop individually and sell under my own company name. Does anyone with any experience in this process have any information with regards to the route to take and process of setting things up so that I may be able to sell my applications? Also any information regarding copyrighting the material would be excellent. I am looking for the easiest way to set up a business that will allow me to have a name in which I can start selling applications to a variety of sources under. I didn't quite know which site to post this on so I hope it is relevant for superuser. Regards, Lloyd

    Read the article

  • Keyboard-Shortcut driffen Utility to move windows around on multiscreen setup

    - by Wolfgang Fahl
    I am looking for a utility to move windows around on a multiscreen (usualy dual screen) setup. So with a keybord shortcut (or mousclick) I would like to send a windows to another monitor. I am using this functionality a lot when I give presentations. I'll lookup something on my mainscreen and then send the window to the screen or beamer where others can see it. Its also useful when working or when I want to send a screen from my computer to the TV screen that is hooked up to the computer. I know two solutions for a) Windows b) Mac OS but none yet for Linux. I'll post my windows and Mac OS solutions as answer and would be interested in other opinions.

    Read the article

  • Connecting office to data center via Metro-ethernet

    - by Eric
    I am installing a metro ethernet link from my office to my data center. The office will have a cisco 3750 with several vlans. The data center end will have a more complicated set up. The metro e from the office will connect to a 2960, which will have two other 2960s with a few vlans and a 2811 router connected to it for connectivity to our other environments and the internet. I am looking at implementing this by connecting the office 3750 and the data center 2960 with a dot1q trunk and doing all routing at the 2811. I will configure subinterfaces for gateways for each of the vlans on the 2811. I work for a small company and don't have much of a budget for an ideal architecture. I can post a simple diagram if needed for clarification. Is there anything I am missing here? I feel like I am forgetting something very basic and want to make sure I eliminate any boneheaded mistakes.

    Read the article

  • What does my blog says about me?

    - by subodhnpushpak
    Somebody said that “a person is as good as he/she THINKS”. Recently, over conversation, one of my close “blog friend” remarked that a blog post revealed so much about the person who has written it; and though we never met physically / or even talked over phone… (we have only exchanged technical talks over chats and blogs); this friend of mine correctly predicted my personality and even my habits!! I also came across with this site http://www.typealyzer.com/?lang=en. Just put a blog address and it will predict the bloggers mindset!! Here is what I get when I put across my blog ..   very flattering… I must say. Why don’t you discover yours?? Do share the results with me.. BTW.. now a days I am working on Windows Phone 7 and am loving it. Have lots of gotchas to blog but simply no time (only 14 hrs a day )

    Read the article

  • Draw contour around object in Opengl

    - by Maciekp
    I need to draw contour around 2d objects in 3d space. I tried drawing lines around object(+points to fill the gap), but due to line width, some part of it(~50%) was covering object. I tried to use stencil buffer, to eliminate this problem, but I got sth like this(contour is green): http://goo.gl/OI5uc (sorry I can't post images, due to my reputation) You can see(where arrow points), that some parts of line are behind object, and some are above. This changes when I move camera, but always there is some part, that is covering it. Here is code, that I use for drawing object: glColorMask(1,1,1,1); std::list<CObjectOnScene*>::iterator objIter=ptr->objects.begin(),objEnd=ptr->objects.end(); int countStencilBit=1; while(objIter!=objEnd) { glColorMask(1,1,1,1); glStencilFunc(GL_ALWAYS,countStencilBit,countStencilBit); glStencilOp(GL_REPLACE,GL_KEEP,GL_REPLACE ); (*objIter)->DrawYourVertices(); glStencilFunc(GL_NOTEQUAL,countStencilBit,countStencilBit); glStencilOp(GL_KEEP,GL_KEEP,GL_REPLACE); (*objIter)->DrawYourBorder(); ++objIter; ++countStencilBit; } I've tried different settings of stencil buffer, but always I was getting sth like that. Here is question: 1.Am I setting stencil buffer wrong? 2. Are there any other simple ways to create contour on such objects? Thanks in advance. EDIT: 1. I don't have normals of objects. 2. Object can be concave. 3. I can't use shaders(see below why).

    Read the article

  • How-To: Run CMSDK against a RAC cluster

    - by frank.closheim
    Using CMSDK in a production environment often requires a robust, reliable and failover enabled repository. When using Oracle Real Application Cluster (RAC) with your CMSDK repository you need to have a specific configuration in place to support such a setup. This post will explain the configuration steps required when running CMSDK 9.0.4.6 with Oracle WebLogic Server (WLS).In the previous CMSDK 9.0.4.2 version a RAC enabled connect string looked like this: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = rac1)(PORT = 1521))(ADDRESS = (PROTOCOL = TCP)(HOST = rac2)(PORT = 1521))(LOAD_BALANCE = NO)(FAILOVER = ON)(CONNECT_DATA =(SERVICE_NAME = rac)(failover_mode = (type=select)(method=basic)))CMSDK 9.0.4.6 makes use of data sources to connect to the underlying database. These data sources are configured inside your Application Server, such as Oracle WebLogic Server.In Oracle WebLogic Server 10.3.4, a single data source implementation has been introduced to support an RAC cluster. It responds to Fast Application Notification (FAN) events to provide Fast Connection Failover (FCF), Runtime Connection Load-Balancing (RCLB), and RAC instance graceful shutdown. XA affinity is supported at the global transaction Id level. The new feature is called WebLogic Active GridLink for RAC; which is implemented as the GridLink data source within WebLogic Server.This GridLink data source also works with Oracle Single Client Access Name (SCAN). SCAN is a feature used in RAC environments that provides a single name for clients to access any Oracle Database running in a cluster. You can think of SCAN as a cluster alias for databases in the cluster. The benefit is that the client’s connect information does not need to change if you add or remove nodes or databases in the cluster.The CMSDK 9.0.4.6 documentation describes how to create a regular JDBC data source named jdbc/OracleDS. Please refer to the following document which describes in detail how to create a GridLink data source in WLS.

    Read the article

  • Example: Cross Cutting Concerns of an Application

    A little while ago I was given an opportunity to design and implement a new system that sent data via an HTTP Post method and then processed the results that were returned so that they could be inserted in to a database. My system had eight core concerns that it needed to fulfill. Eight Core Concerns Database Access Data Entities Worker Result Processing Process Flow Manager Email/Notification Error Handling Logging Of these eight, five were actually cross cutting concerns. 5 Cross Cutting Concerns Database Access Data Entities Email/Notification Error Handling Logging These five cross cutting concerns were determined after I created an aspect oriented model to help identity the system components that could be factored out into separate components.  These separated components would then be included in the system so that they could be used by various other components.  These five components allow all of the other components to access the database, store data, send notifications, handle errors, and log all system events.  Thus, these components are used to share unique aspects to the system via their implementation. The use of Aspect oriented architecture greatly helped me define what components I needed to create and what each of those components could do.  It also showed how all of the other aspects depended on each other so that each component did not have to re-implement code that was already created in the existing system.

    Read the article

  • aws s3 works with script but not on cron

    - by user3800017
    guys.. My first post ! hope not the last .. I have few bunch of servers on aws ec2 platforms. I made a simple script to backup my custom logs on their s3 storage bucket. The problem is the script works fine .. but I tried to add it to the crontab. And the script executes but not the s3 sync/mv part ! Here is my code: NOW=$(date "+%b_%d_%Y") MY_HOSTNAME=`uname -n` mv /opt/req/req* /opt/req/bkup/ mv /opt/response/res* /opt/req/bkup/ cd /opt/req/bkup/ tar -cvf ${MY_HOSTNAME}_req_bkup_${NOW}.tar re* rm *.txt aws s3 mv /opt/req/bkup/* s3://req `

    Read the article

  • OpenGL render to texture causing edge artifacts

    - by mysticalOso
    This is my first post here so any help would be massively appreciated :) I'm using C++ with SDL and OpenGL 3.3 When rendering directly to screen I get the following result And when I render to texture I this happens Anti-aliasing is turned off for both. I'm guessing this has something to do with depth buffer accuracy but I've tried a lot of different methods to improve the result but, no success :( I'm currently using the following code to set up my FBO: GLuint frameBufferID; glGenFramebuffers(1, &frameBufferID); glBindFramebuffer(GL_FRAMEBUFFER, frameBufferID); glGenTextures(1, &coloursTextureID); glBindTexture(GL_TEXTURE_2D, coloursTextureID); glTexImage2D(GL_TEXTURE_2D,0,GL_RGB,SCREEN_WIDTH,SCREEN_HEIGHT,0,GL_RGB,GL_UNSIGNED_BYTE,NULL); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_NEAREST); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); //Depth buffer setup GLuint depthrenderbuffer; glGenRenderbuffers(1, &depthrenderbuffer); glBindRenderbuffer(GL_RENDERBUFFER, depthrenderbuffer); glRenderbufferStorage(GL_RENDERBUFFER, GL_DEPTH_COMPONENT24, SCREEN_WIDTH,SCREEN_HEIGHT); glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_RENDERBUFFER, depthrenderbuffer); glFramebufferTexture(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, coloursTextureID, 0); GLenum DrawBuffers[1] = {GL_COLOR_ATTACHMENT0}; glDrawBuffers(1, DrawBuffers); // if(glCheckFramebufferStatus(GL_FRAMEBUFFER) != GL_FRAMEBUFFER_COMPLETE) return false; Thank you so much for any help :)

    Read the article

  • Likelihood of a hard drive PCB replacement working?

    - by Grant Limberg
    I have a 1.5TB Seagate 7200.11 that died. The platter still spins up initially when attached to a machine, but then the drive clicks and spins down. Then the cycle repeats. I've found a few sites that sell replacement PCBs, however I don't know if the PCB is the issue, or something else. Given the symptoms above, is it at all likely that a PCB replacement would help? If not, I won't waste my money on the PCB replacement. Note: I put the drive in an external ESATA controller and tried hooking it up to a Linux box here at work and got some error messages in the logs. I can post them if anyone thinks it will help in determining whether a PCB swap would fix the problem I'm running into.

    Read the article

  • Scripted SOA Diagnostic Dumps for PS6 (11.1.1.7)

    - by ShawnBailey
    When you upgrade to SOA Suite PS6 (11.1.1.7) you acquire a new set of Diagnostic Dumps in addition to what was available in PS5. With more than a dozen to choose from and not wanting to run them one at a time, this blog post provides a sample script to collect them all quickly and hopefully easily. There are several ways that this collection could be scripted and this is just one example. What is Included: wlst.properties: Ant Properties build.xml soa_diagnostic_script.py: Python Script What is Collected: 5 contextual thread dumps at 5 second intervals Diagnostic log entries from the server WLS Image which includes the domain configuration and WLS runtime data Most of the SOA Diagnostic Dumps including those for BPEL runtime, Adapters and composite information from MDS Instructions: Download the package and extract it to a location of your choosing Update the properties file 'wlst.properties' to match your environment Run 'ant' (must be on the path) Collect the zip package containing the files (by default it will be in the script.output location) Properties Reference: oracle_common.common.bin: Location of oracle_common/common/bin script.home: Location where you extracted the script and supporting files script.output: Location where you want the collections written username: User name for server connection pwd: Password to connect to the server url: T3 URL for server connection, '<host>:<port>' dump_interval: Interval in seconds between thread dumps log_interval: Duration in minutes that you want to go back for diagnostic log information Script Package

    Read the article

  • Windows DFS Limitations

    - by Phil
    So far I have seen an article on performance and scalability mainly focusing on how long it takes to add new links. But is there any information about limitations regarding number of files, number of folders, total size, etc? Right now I have a single file server with millions of JPGs (approx 45 TB worth) that are shared on the network through several standard file shares. I plan to create a DFS namespace and replicate all these images to another server for high availability purposes. Will I encounter extra problems with DFS that I'm otherwise not experiencing with plain-jane file shares? Is there a more recommended way to replicate these millions of files and make them available on the network? EDIT: I would experiment on my own and write a blog post about it, but I don't have the hardware for the second server yet. I'd like to collect information before buying 45 TB of hard drive space...

    Read the article

  • Korea&rsquo;s Anti Abortion / Pro Life Movement

    - by Randy Walker
    The South Korean government is in dire straits.  The national birth rate continues to decline and as the population grows older, there aren’t enough children being born to support the country long term.  The social issues of post Korean War are coming back to haunt the empowered nation.  Being torn apart by the Korean War (nicknamed the forgotten war in America) and with a nation facing starvation, South Korea allowed hundreds of thousands of their children to be adopted abroad.  This has created a problem of epidemic proportions, essentially devaluing life in Korea and child rearing. In an effort to encourage birth rates, the government encouraged their workers to go home early and procreate by turning off the lights in buildings.  Something unknown to me, was the illegalization of abortion except in special cases. According to the this article, http://joongangdaily.joins.com it’s working.  Abortions are down and women are being encouraged to give birth.  However the flip side is illegal risky abortions are on the rise, with potential back alley abortions looming.  But with a nation facing it’s potential implosion, it has to continue it’s efforts to encourage mothers to give birth. Many of the issues that America has faced is in stark contrast to South Korea.  Abortion has been a generally accepted procedure for some time.  If you’ll recall, I mentioned South Korea devalued their children.  But the nation’s problems lie so much deeper.  Being an Asian nation, saving “face” is an important aspect of life.  And being an unwed mother disgraces the family.  Living as a single mother in South Korea is a difficult life.  Most married mothers stay at home to take care of the children.  Being a shunned single mother that has a hard time getting a job (because you are a single mother) and affording child care isn’t like life in America. If we in the states suddenly faced a birthrate crisis, what would the U.S. government do?

    Read the article

< Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >