Search Results

Search found 3217 results on 129 pages for 'david nash'.

Page 44/129 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• Is Tripp Lite a trusted brand for a UPS?

  - by David

  I am looking to buy a rack mounted UPS that can take in 208V power and serve up 120V power. A basic APC unit that can do this is $4k. I have found a Tripp Lite model that will work for $2.5k. Is the extra $1.5k for the APC just for the brand? Or will the Tripp Lite serve me just as well? Thanks!

  Read the article

• Workstation Card

  - by david

  I am going to buy an HP EliteBook 8740w. The problem is it comes with Nvidia quadro 2800m and ati 7820m firepro 3d? please advise which is better?

  Read the article

• How do I access an Ubuntu VirtualBox guest at a static IP from an OS X host?

  - by David Siegel

  How does one configure an Ubuntu guest to use a static IP that's visible to an OS X host, and ensure that the static IP is independent of the host's network configuration? I previously used bridged networking for my guest, but I'm constantly moving my host between networks so the guest IP is always different. First, I tried setting the guest network configuration to NAT and forwarding host port 1022 to guest port 22, so I could at least ssh to a fixed address (localhost:1022): $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/Protocol" "TCP" $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/GuestPort" 22 $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/HostPort" 1022 Then, $ ssh localhost -p 1022 ssh: connect to host localhost port 1022: Connection refused But this didn't work (guest has no network access with NAT and OS X refused the connection, as you can see). I'd love a general solution that would let me communicate with my guest at a fixed IP.

  Read the article

• Scripted printer configuration changes

  - by David Steven

  I've got about a dozen Windows XP machines that I need to make a couple specific printer configuration changes to. The printer is "virtual" printer for an electronic delivery service. I'd like to not have to visit each machine individually. I already have the means to execute commands remotely on the machines, I just can't seem to find away to adjust these settings via command line or script. Specifically I need to be able to make the following changes: 1) As an admin user: - Device Settings - Font Substitution Table/Courier New - Change to "Courier" 2) As a specific* user: - Printer Preferences - Paper/Quality - Advanced - Change Graphic/Print Quality to "600 x 600" - Change Document Options/Printer Features/Graphics Mode to "HP-GL/2" *This change is a per user configuration, unless there's some way to make it once. In this situation I only really need it for a specific (different) user on each machine.

  Read the article

• How Do I Change the Windows7 LAN Proxy Config from the Command Line

  - by david.barkhuizen

  In Windows7, Is it possible to define/change the proxy config from the command line ? So, using the gui, I would go: Start Control Panel Network and Internet Internet Options Connections LAN Settings and then - enable/disable the proxy - define IP:port of proxy server But I would like to rather do this from the command line (so that I can run the command from a batch-file with a shortcut key - enabling me to switch proxy configs using a short-cut, rather than having to wade through the MS wizard). I've looked at using netsh.exe to change the settings for WinHTTP, but this seems to be thr wrong thing to do, as the WinHTTP setting do not appear to be related to the LAN settings. Much appreciated folks.

  Read the article

• VPN within a VM to allow for internet access on the host

  - by David Durrant

  I have a network connection (created under Networks and Sharing) that I use to connect to a customer's site. But when I use this to connect to the site, I loose all access to the public internet, and can only access customer specific items. I want to circumvent this issue by creating a VM and then utilizing the VM to connect to the network location and interact within the customer's domain, while leaving my host machine open to the internet. I'm not extremely familiar with networking, but I have a few basic skills. Please let me know if this is possible and what the correct procedures are. I already have a VM created with VirtualBox, and both the host and guest are running Windows 7 x64. I have created duplicate VPNs already, but can only connect successfully on the host machine.

  Read the article

• 'Object variable or With block variable not set' error when setting a range in VBA

  - by David Gard

  I have a function that creates a Pivot Table, but I am getting an error when I try to set a range that will be merged and have a title added to it. In the below code, pivot_title_range is a 'String' variable, and is optional when calling the funtion. title_range is a 'Range' variable. Both lines that set the range (whether or not the users declares pivot_title_range) cause the same error. If pivot_title_range = "" Then title_range = ActiveSheet.Range("B3:E4") Else title_range = ActiveSheet.Range(pivot_title_range) End If Here is the error that I am getting - Run-time error '91': Object variable or With block variable not set If required, here is a Pastebin of the full function - http://pastebin.com/L711jayc. The offending code starts on line 160. Is anybody able to tell me what I am doing wrong? Thanks.

  Read the article

• Recommended IIS 7.5 books

  - by David McKenna

  Can somebody recommend good reading material for administrating IIS 7.5. Regards, DMcKenna

  Read the article

• How to install PHPMyAdmin on Linux EC2 instance?

  - by David

  I just finished setting up a default Linux EC2 instance and would like to install PHPMyAdmin. I already have Apache and MySQL installed but cannot seem to install PHPMyAdmin. I tried using sudo apt-get phpmyadmin but the command apt-get is not recognized. I also tried sudo yum install phpmyadmin but that I get the message No package phpmyadmin available. Any suggestions on what I am doing wrong?

  Read the article

• How do I fix a corrupted copy of .Net Framework on Windows 7?

  - by David

  I receive the following error when trying to run applications that require .net Framework 3.5: "Could not load file or assembly 'System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The module was expected to contain an assembly manifest." I've tried numerous fixes, such as reinstalling through ad/remove software, copying the .net folder over from a clean windows 7 install, and running the .net cleanup tool. Just wondering if anyone has run into this issue before, or has an idea on how to fix it.

  Read the article

• What part of SMF is likely broken by a hard power down?

  - by David Mackintosh

  At one of my customer sites, the local guy shut down their local Solaris 10 x86 server, pulled the power inputs, moved it, and now it won’t start properly. It boots and then presents a prompt which lets you log in. This appears to be single user milestone (or equivalent). Digging into it, I think that SMF isn’t permitting the system to go multi-user. SMF was generating a ton of errors on autofs, after some fooling with it I got it to generate errors on inetd and nfs/client instead. This all tells me that the problem is in some SMF state file or database that needs to be fixed/deleted/recreated or something, but I don’t know what the actual issue is. By “generate errors”, I mean that every second I get a message on the console saying “Method or service exit timed out. Killing contract <#.” This makes interacting with the computer difficult. Running svcs –xv shows the service as “enabled”, in state “disabled”, reason “Start method is running”. Fooling with svcadm on the service does nothing, except confirm that the service is not in a Maintenance state. Logs in /lib/svc/log/$SERVICE just tell you that this loop has been happening once per second. Logs in /etc/svc/volatile/$SERVICE confirm that at boot the service is attempted to start, and immediately stopped, no further entries. Note that system-log isn’t starting because system-log depends on autofs so I have no syslog or dmesg. Googling all these terms ends up telling me how to debug/fix either autofs or nfs/client or inetd or rpc/gss (which was the dependency that SMF was using as an excuse to prevent nfs/client from “starting”, it was claiming that rpc/gss was “undefined” which is incorrect since this all used to work. I re-enabled it with inetadm, but inetd still won’t start properly). But I think that the problem is SMF in general, not the individual services. Doing a restore_repository to the “manifest_import” does nothing to improve, or even detectibly change, the situation. I didn’t use a boot backup because the last boot(s) were not useful. I have told the customer that since the valuable data directories are on a separate file system (which fsck’s as clean so it is intact) we could just re-install solaris 10 on the / partition. But that seems like an awfully windows-like solution to inflict on this problem. So. Any ideas what piece is broken and how I might fix it?

  Read the article

• VoIP on Netgear DGN 2000 and Lynksys PAP2

  - by David Brown

  I have a VoIP service running perfectly for outgoing calls but I cannot receive incoming calls. I have a Netgear DGN 2000 modem router on 192.168.0.1 and a Lynksys Phone Adapter PAP2 on 192.168.0.2. I have created 3 new custom services: Service Table Service Name Ports tlenfon(TCP) 5060 tlenfon2(UDP) 15000 tlenfon3(UDP) 35000 I have reserved the address 192.168.0.2 for the PAP 2 I have forwarded the ports for each service to the PAP2 Service Name Action LAN Server IP address WAN Users Log tlenfon ALLOW always 192.168.0.2 Any Always tlenfon2 ALLOW always 192.168.0.2 Any Always tlenfon3 ALLOW always 192.168.0.2 Any Always I have checked the Default DMZ and specified 192.168.0.2 What have I missed?

  Read the article

• Why do partially failed/failing switches fail to pass DHCP?

  - by David Mackintosh

  I've noticed this several times: a switch starts to behave oddly. Usually if the switch doesn't fail outright, what tends to get noticed is that DHCP doesn't work. We had a Linksys SRW-224P fail today. Systems which were still connected worked properly, until it came time to renew their DHCP lease. Once the lease expired, they stopped working, but up until then we couldn't detect a failure. This includes PoE VoIP phones -- they work fine until their lease is up, at which point they're done. I've noticed this on the above-mentioned Linksys, three varieties of 3Com, and possibly half a dozen dumb switches. What is it about DHCP that makes it sensitive to failing switches?

  Read the article

• SCP command Clarification

  - by david.colais

  I'm using the scp commands to pull some files from the remote server and one variation of the command is not working. I have 2 files names one.xml and two.xml in a remote server and I'm pulling these two files into the current dir using the following command: scp [email protected]:/student/class/Intermediate/one.xml . scp [email protected]:/student/class/Intermediate/two.xml . The above command works fine but if I use wildcards to pull all the xml files in a single shot as shown below it returns scp: No match. scp [email protected]:/student/class/Intermediate/*.xml . Why is it working if I pull the files individually and not working if I try to pull using wildcards.

  Read the article

• Sharepoint Farm - more than one DataBase Server

  - by David Esteves

  Is it possible to have one MOSS Farm with two Database servers?

  Read the article

• T61, NVidia, Ubuntu 9.10 == Video problems

  - by David Lazar

  Hi, Upgraded to latest Ubuntu, currently 9.10. Videos used to work fine. Now, playing videos using VLC or any other media player shows them 'sepia' tinged when playing. This is annoying. I remember this used to happen on occasion (after resuming from suspect), and I forget what I fiddled with to make it better. Does anyone have the method to force video to render correctly with this combination? It happens even after a reboot. Thanks

  Read the article

• hosts.deny ignored by MacOSX 10.8

  - by David Holm

  I have been trying to set up my MacOS X Server, which I recently upgraded to Mountain Lion, to use denyhosts as I need to open port 22 to it. denyhosts is set up and adds entries to /etc/hosts.deny so I decided to add my laptops IP to it in order to verify that it actually works but I can still log in and my IP shows up in /private/var/log/system.log. I even rebooted the server once just to be sure there wasn't some service that had to be restarted. I tried the following entries: ALL: <my laptop's IP> sshd: <my laptop's IP> sshd: 127.0.0.1 My /etc/sshd_config has the following parameters set: UsePAM yes UseDNS no I Googled if deny.hosts has been deprecated in OSX 10.7 or 10.8 but I couldn't find any indications that it has. Any ideas of what is going wrong or if there is an alternative way to achieve the same result? Yes, a private key would solve this problem but for the time being I would like to stick to using password authentication. I also like the idea of denyhosts actually blocking access to all services running on the server and not just ssh.

  Read the article

• Trouble Connecting to Virtual Machine after IP address Change

  - by David

  I have a VMware image running a copy of Fedora 11 which is hosted on a remote server. The remote server recently had its IP address change. I'm now unable to connect to my virtual machine. The server admin assures me that my virtual machine is running and assigned the new IP address. I have checked the firewalls and had the remote admin restart the VM instance. Neither of these fixed the problem. How do I troubleshoot a remote server which I am unable to SSH to? I'm actually even unable to ping the remote IP (connection timed out).

  Read the article

• Where's my Open-With gVim context menu option in Windows 7?

  - by David Mackintosh

  I have gVim installed. Under Vista and XP, this offered me an addition to either the object context menu of "Edit with gVim", or an addtion to the "Open With" context menu of "gVim". This would let me send arbitrary files to gVim for editing. Under Windows 7 64-bit, I have installed gVim -- twice, as it happens -- and there's no menu item. How do I add an option to send arbitrary files to gVim for viewing/editing?

  Read the article

• How much money can I save from installing a 80 plus bronze or gold PSU? [closed]

  - by David

  Currently I've only a 300 watt PSU and my pc is working like a charm but with all the components it should use the psu to the max. Recently I've read about 80 plus certificate and I'm wondering if it's worth to buy a 80 plus certificate psu? My power cost last year was also higher then before and my pc turns almost 14/7 a day. I mean power cost in used power not in augmented prices. I'm also planing to buy a SLI video card.

  Read the article

• Node js server not responding outside localhost centos

  - by David Martinez

  I'm running a basic express server from CentOS but for some reason it is not responding outside of localhost, I have tried everything I have found on google but nothing works so far. This is my express server: app.listen(3000,"0.0.0.0"); If I do curl http://localhost:3000/ in the server it works fine. If I curl to the ip of the server it doesn't work. I already changed my iptables num target prot opt source destination 1 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 2 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 3 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3000 There is currently a apache server running on port 80 with no problems. I also tried setting a VirtualHost on apache but it didn't work either: <VirtualHost *:80> ServerName SubDOmain.MyDomain.com ProxyRequests off <Proxy *> Order allow,deny Allow from all </Proxy> ProxyPass / http://localhost:3000/ ProxyPassReverse / http://localhost:3000/ ProxyPreserveHost on </VirtualHost> There is another virtual host working fine that redirects to another DocumentRoot. I'm running Node on root for testing purpose, but the node application owner is another user. All folders have 705 and files 664 Edit: I stopped apache and run my node app on port 80 and it working fine, I could access node app from my ip and domain.

  Read the article

• Downloaded chm is blocked, is there a solution?

  - by David Rutten

  CHM files that are downloaded are often tagged as potentially malicious by Windows, which effectively blocks all the html pages inside of it. There's an easy fix (just unblock the file after you download it), but I was wondering if there's a better way to provide unblocked chm files. What if I were to download the chm file (as a byte stream) from our server inside the application, then write all the data to a file on the disk. Would it still be blocked? Is there another/better way still? Edit: Yes, downloading the file using a System.Net.WebClient does solve the problem. But, is there still a better way?

  Read the article

• File property information (last write time and file size) in explorer out of date by hours over netw

  - by David L Morris

  An application is running on a windows XP prof machine picking up file from a network share from another windows machine. It detects that the file has been updated (by date and time or optionally file size) and reads it for any new data. Most of the time the last write time and file size, seems to be up to date. Occasionally, this information stops being updated, even though the file is growing (intermittently during the day) with appended content, so that the last write time and file size remain fixed at some arbitrary moment. This is visible in explorer, where it shows a fixed last write time on the reading machine. Just opening the file to edit it in notepad, immediately refreshes the file properties, and the other application picks up where it left of. The file location can't be changed, nor the location of the relevant applications. Any solutions to resolve this problem?

  Read the article

• System Centre Essentials 2007 Clients Losing Status

  - by David Collie

  Clients that have been reporting their state fine suddenly start reporting "Windows 0.0" for their OS and "Not yet contacted" for their Last Contacted date even though previously these values were present and correct. Any idea why this might be happening? I've spend a long time playing with wsauclt etc and just when I think I've the problem it comes back again! Thanks.

  Read the article

• No HTTP Response from Tomcat 7 EC2 instance

  - by David Kaczynski

  I am new to EC2 (and Tomcat, for that matter), and I am trying to deploy a vanilla Tomcat 7 server to an Ubuntu 12.04.1 EC2 instance and access the default test site over HTTP. My EC2 instance is running, and the Security Group includes port 80: My /etc/tomcat7/server.xml config has been edited to listen for HTTP requests on port 80: 0 I have restarted my Tomcat 7 server via sudo service tomcat7 restart. However, according to sudo netstat -lnp, Tomcat is not listed as listening over port 80: I am unable to get any response from going to the ...amazonaws.com public DNS in a web browser. What am I missing?

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >