Search Results

Search found 3599 results on 144 pages for 'deploy'.

Page 44/144 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• Run a rails server on Amazon EC2 [on hold]

  - by Jashwant

  Context: I've tried rubber gem, but that does not fulfill my requirements ( I needed to deploy on existing instance, so don't recommend me rubber) So, I followed this excellent tutorial http://stackoverflow.com/questions/15535140/installing-ruby-2-0-and-rails-4-0-0beta-on-aws-ec2 Now, I have ruby 2.0 and rails 4.0.0 running on AWS EC2. I successfully ran the server with RDS (mysql) as db and default webrick as server ( Using command rails server ) But, I've read that webrick is a development server and shouldn't be used at production. What I tried: I googled and came up with some alternatives. Capistrano Nginx / apache with passenger Passenger with Capistrano Unicorn Puma My Question: What exactly is capistrano / passenger ? Are they middleware to ease my deployment process ? I don't see any difficulty in doing rails server command. If they are just middleware, nginx with passenger and capistrano does not make any sense ? Why would I add a learning curve ( to learn nginx, passenger and capistrano configs) just to run my server ? I can just use nginx to deploy my app. Can't I ? What combination should I use on Amazon EC2 (or may be at any some other production server).

  Read the article

• Scaling a LAMP website hosted on EC2

  - by Gublooo

  Hello, I'm very new to all this - I've recently managed to launch my website on EC2. As next step, I want to learn how to scale the website. I have a general idea but wanted some input from the experts about how to go about it. My website is based on LAMP but also has Red5 server which allows users to record messages and also used for playing them back. Currently this is the architecture I'm planning to setup for initial scaling. Deploy four small EC2 instances for the following purposes: Instance-1: On this instance I will run the MySql database Instance-2: On this instance I will run the red5 server Instance-3 & Instance-4 These 2 instances will be used to deploy the website and will have Apache running on them. They will communicate with the mysql server on Instance-1 and red5 server on Instance-2 using the internal IP address. As an when required, I will launch another instance of the same EBS - I will have EBS of say 50 GIG where all the mysql data will be stored. Also red5 will use this EBS to store the video messages Load-Balancer - Use the load balancer provided by Amazon to load balance Instance-3 and Instance-4 This is what I have in mind. I could be way off so please bear with me. Also I have not taken into account the case of scaling MySql server as I currently have no idea about how that will be done and whether or not it is necessary initially. I am aware that Amazon provides auto scaling and mysql scaling as well but I dont want to get into that right now. Your feedback is appreciated Thanks

  Read the article

• How to access original files from before a symlink gets updated, which have since been moved to another dir

  - by Luke Cousins

  We have a website and our deployment process goes somewhat like the following (with lots of irrelevant steps excluded) echo "Remove previous, if it exists, we don't need that anymore" rm -rf /home/[XXX]/php_code/previous echo "Create the current dir if it doesn't exist (just in case this is the first deploy to this server)" mkdir -p /home/[XXX]/php_code/current echo "Create the var_www dir if it doesn't exist (just in case this is the first deploy to this server)" mkdir -p /home/[XXX]/var_www echo "Copy current to previous so we can use temporarily" cp -R /home/[XXX]/php_code/current/* /home/[XXX]/php_code/previous/ echo "Atomically swap the symbolic link to use previous instead of current" ln -s /home/[XXX]/php_code/previous /home/[XXX]/var_www/live_tmp && mv -Tf /home/[XXX]/var_www/live_tmp /home/[XXX]/var_www/live # Rsync latest code into the current dir, code not shown here echo "Atomically swap the symbolic link to use current instead of previous" ln -s /home/[XXX]/php_code/current /home/[XXX]/var_www/live_tmp && mv -Tf /home/[XXX]/var_www/live_tmp /home/[XXX]/var_www/live The problem we are having and would like help with is that, the first thing any website page load does is work out the base dir of the application and define it as a constant (we use PHP). If then during that page load a deployment occurs, the system tries to include() a file using the original full path and will get the new version of that file. We need it to get the old one from the old dir which has now moved as in: System starts page load and determines SYSTEM_ROOT_PATH constant to be /home/[XXX]/var_www/live or by using PHP's realpath() it could be /home/[XXX]/php_code/current. Symlink for /home/[XXX]/var_www/live get updated to point to /home/[XXX]/php_code/previous instead of /home/[XXX]/php_code/current where it did originally. System tries to load /home/[XXX]/var_www/live/something.php and gets /home/[XXX]/php_code/current/something.php instead of /home/[XXX]/php_code/previous/something.php I'm sorry if that is not explained very well. I'd really appreciate some ideas on how to get around this problem if someone can. Thank you.

  Read the article

• How to determine if my AWS/EC2 server has been compromised / resolution?

  - by ElHaix

  I have recently seen an increase in network in/out activity on my server and am trying to determine if my AWS/EC2 instance has been compromised, and if so, how to resolve? In my security group I have: Inbound: 80 (HTTP) 0.0.0.0/0 Outbound: 80 (HTTP) 0.0.0.0/0 443 (HTTPS) 0.0.0.0/0 Using TCP-UDP Endpoint Viewer: I see a lot of w3wp.exe TCP processes with varying local ports http and numbered, as well as varying remote ports. Some processes go red/yellow/green on updates . I see Remote address for most w3wp processes are my ec2 instance, however I am seeing several to *.deploy.akamaitechnologies.com and *.deploy.static.akamaitechnologies.com with received bytes varying between 4-11 megs. I also see Ec2Config.exe, remote address: 169.254.169.254 System Process Remote Address: fetcher4-4.p.mail.ru (how can I get rid of this one?!) local port: http remote port: 33432 I am also seeing some system processes from 114.216-244-93-rdns.wowrack.com: Protocol: TCP local port: http remote port: varying As well as some baiduspider "System Process"'s. I'm afraid that my system may have been compromised, and wondering if these results are any indication of that. If so, how can I get eliminate these possible threats? I have MS Security Essentials installed.

  Read the article

• Microsoft Deployment Toolkit 2012 Error

  - by Jacob Schaer

  I just started with MDT2012 recently in hopes of eventually getting away with using Ghost to deploy all of our department computers. When I test deploy in VirtualBox, it deploys the OS properly, but stops because of a network driver failure (it gets the "could not allocate resources" issue). On physical hardware (Latitude E6500, Optiplex 980, and an older Latitude) it gets through the multicast and stops immediately after with: "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information" I've looked at the logs and never see anything really of note. Originally I was using DriverPacks from DriverPacks.net, but thinking it was a driver issue, I switched over to using Dell's cab driver packs. Still the same issue. I check and it did the HDD is all fine - it was properly partitioned, set to bootable, and was loaded with all the proper OS installer files. I'm using a flash drive to do the install - when I make changes to the deployment share I rebuild and copy the ISO to the drive, then use YUMI multiboot to start the ISO (probably irrelevant).

  Read the article

• Zero downtime deployment (Tomcat), Nginx or HAProxy, behind hardware LB - how to "starve" old server?

  - by alexeypro

  Currently we have the following setup. Hardware Load Balancer (LB) Box A running Tomcat on 8080 (TA) Box B running Tomcat on 8080 (TB) TA and TB are running behind LB. For now it's pretty complicated and manual job to take Box A or Box B out of LB to do the zero downtime deployment. I am thinking to do something like this: Hardware Load Balancer (LB) Box A running Nginx on 8080 (NA) Box A running Tomcat on 8081 (TA1) Box A running Tomcat on 8082 (TA2) Box B running Nginx on 8080 (NB) Box B running Tomcat on 8081 (TB1) Box B running Tomcat on 8082 (TB2) Basically LB will be directing traffic between NA and NB now. On each of Nginx's we'll have TA1, TA2 and TB1, TB2 configured as upstream servers. Once one of the upstreams's healthcheck page is unresponsive (shutdown) the traffic goes to another one (HttpHealthcheckModule module on Nginx). So the deploy process is simple. Say, TA1 is active with version 0.1 of the app. Healthcheck on TA1 is OK. We start TA2 with Healthcheck on it as ERROR. So Nginx is not talking to it. We deploy app version 0.2 to TA2. Make sure it works. Now, we switch the Healthcheck on TA2 to OK, switch Healthcheck to TA1 to ERROR. Nginx will start serving TA2, and will remove TA1 out of rotation. Done! And now same with the other box. While it sounds all cool and nice, how do we "starve" the Nginx? Say we have pending connections, some users on TA1. If we just turn it off, sessions will break (we have cookie-based sessions). Not good. Any way to starve traffic to one of the upstream servers with Nginx? Thanks!

  Read the article

• Driver corruption when deploying Dell Touchpad Drivers (with software) during imaging process

  - by BigHomie

  We're an sccm shop, and use it to deploy Windows. When deploying Dell laptops (multiple models), the touchpad drivers seem install properly, but the software doesn't. The resulting problem is that when the touchpad is pressed on occasion, the mouse pointer will 'jump' to certain points on the screen. A possible symptom of this problem/visible sign is if the touchpad icon isn't in the system tray. The software is in the control panel, but when opened part of the gui is pixelated, indicating botched install maybe? The manual resolution to this, is to go into device manager and uninstall the driver with the option to uninstall all driver software. After a restart, the driver and software is apparently reinstalled, and from there works as expected. Obviously this partially defeats the purpose of a zero touch deployment. If anyone knows why this is and/or a possible workaround, those answers would be valid as well. Barring that, I want to find a way to deploy the driver and touchpad software in an unattended way, so that it can be conditionally installing during the imaging process. To be honest I'm not sure how to troubleshoot this, I suppose I could try drvinst.exe to install the driver, but finding out why this fails initially would keep me from spinning my wheels.

  Read the article

• Using Monit to monitor Resque

  - by Alex

  I'm trying to use resque as a job runner for Rails. I've tried this config, and many other ways of demonizing the rescue task (because running rake resque:work leaves the terminal tied to that command). Unfortunately, their example configuration doesn't work for me. Does the configuration look correct? Or is there another way to turn the process into a daemon? Thank you :) check process resque_worker_QUEUE with pidfile /data/APP_NAME/current/tmp/pids/resque_worker_QUEUE.pid start program = "/bin/sh -c 'cd /data/APP_NAME/current; RAILS_ENV=production QUEUE=queue_name VERBOSE=1 nohup rake environment resque:work& > log/resque_worker_QUEUE.log && echo $! > tmp/pids/resque_worker_QUEUE.pid'" as uid deploy and gid deploy stop program = "/bin/sh -c 'cd /data/APP_NAME/current && kill -s QUIT `cat tmp/pids/resque_worker_QUEUE.pid` && rm -f tmp/pids/resque_worker_QUEUE.pid; exit 0;'" if totalmem is greater than 300 MB for 10 cycles then restart # eating up memory?

  Read the article

• Deploying and publishing my first asp.net mvc 3 web application

  - by john G

  I want to deploy and publish my first asp.net mvc 3 web application at my client side (the client is a small office with 2-4 employees that need to access the application) , currently i finished developing my web application using the free Microsoft Visual Web Developer 2010 express and the free SQL Server 2008 R2 Express database . So my concerns are :- 1. The free sql express database that i am currently using have a limitation of 10 GB i think So i want to buy SQL server for small business to remove the database limitations. So my questions that i need help with them are:- **1. If i use the sql server for small business then will my web application have other limitations on production i am unaware of ? 2. Will be using SQL server for small business my right choice? baring in my that the system will be used by 2-4 clients only? 3. How much does “approximate ” the sql server database will cost in US dollars? 4. Are there any other software that i need to buy to be able to deploy and publish the application on intranet and the internet ?** Appreciate any help Best Regards

  Read the article

• Java Cloud Service Integration to REST Service

  - by Jani Rautiainen

  Service (JCS) provides a platform to develop and deploy business applications in the cloud. In Fusion Applications Cloud deployments customers do not have the option to deploy custom applications developed with JDeveloper to ensure the integrity and supportability of the hosted application service. Instead the custom applications can be deployed to the JCS and integrated to the Fusion Application Cloud instance. This series of articles will go through the features of JCS, provide end-to-end examples on how to develop and deploy applications on JCS and how to integrate them with the Fusion Applications instance. In this article a custom application integrating with REST service will be implemented. We will use REST services provided by Taleo as an example; however the same approach will work with any REST service. In this example the data from the REST service is used to populate a dynamic table. Pre-requisites Access to Cloud instance In order to deploy the application access to a JCS instance is needed, a free trial JCS instance can be obtained from Oracle Cloud site. To register you will need a credit card even if the credit card will not be charged. To register simply click "Try it" and choose the "Java" option. The confirmation email will contain the connection details. See this video for example of the registration.Once the request is processed you will be assigned 2 service instances; Java and Database. Applications deployed to the JCS must use Oracle Database Cloud Service as their underlying database. So when JCS instance is created a database instance is associated with it using a JDBC data source.The cloud services can be monitored and managed through the web UI. For details refer to Getting Started with Oracle Cloud. JDeveloper JDeveloper contains Cloud specific features related to e.g. connection and deployment. To use these features download the JDeveloper from JDeveloper download site by clicking the "Download JDeveloper 11.1.1.7.1 for ADF deployment on Oracle Cloud" link, this version of JDeveloper will have the JCS integration features that will be used in this article. For versions that do not include the Cloud integration features the Oracle Java Cloud Service SDK or the JCS Java Console can be used for deployment. For details on installing and configuring the JDeveloper refer to the installation guideFor details on SDK refer to Using the Command-Line Interface to Monitor Oracle Java Cloud Service and Using the Command-Line Interface to Manage Oracle Java Cloud Service. Access to a local database The database associated with the JCS instance cannot be connected to with JDBC.  Since creating ADFbc business component requires a JDBC connection we will need access to a local database. 3rd party libraries This example will use some 3rd party libraries for implementing the REST service call and processing the input / output content. Other libraries may also be used, however these are tested to work. Jersey 1.x Jersey library will be used as a client to make the call to the REST service. JCS documentation for supported specifications states: Java API for RESTful Web Services (JAX-RS) 1.1 So Jersey 1.x will be used. Download the single-JAR Jersey bundle; in this example Jersey 1.18 JAR bundle is used. Json-simple Jjson-simple library will be used to process the json objects. Download the  JAR file; in this example json-simple-1.1.1.jar is used. Accessing data in Taleo Before implementing the application it is beneficial to familiarize oneself with the data in Taleo. Easiest way to do this is by using a RESTClient on your browser. Once added to the browser you can access the UI: The client can be used to call the REST services to test the URLs and data before adding them into the application. First derive the base URL for the service this can be done with: Method: GET URL: https://tbe.taleo.net/MANAGER/dispatcher/api/v1/serviceUrl/<company name> The response will contain the base URL to be used for the service calls for the company. Next obtain authentication token with: Method: POST URL: https://ch.tbe.taleo.net/CH07/ats/api/v1/login?orgCode=<company>&userName=<user name>&password=<password> The response includes an authentication token that can be used for few hours to authenticate with the service: {   "response": {     "authToken": "webapi26419680747505890557"   },   "status": {     "detail": {},     "success": true   } } To authenticate the service calls navigate to "Headers -> Custom Header": And add a new request header with: Name: Cookie Value: authToken=webapi26419680747505890557 Once authentication token is defined the tool can be used to invoke REST services; for example: Method: GET URL: https://ch.tbe.taleo.net/CH07/ats/api/v1/object/candidate/search.xml?status=16 This data will be used on the application to be created. For details on the Taleo REST services refer to the Taleo Business Edition REST API Guide. Create Application First Fusion Web Application is created and configured. Start JDeveloper and click "New Application": Application Name: JcsRestDemo Application Package Prefix: oracle.apps.jcs.test Application Template: Fusion Web Application (ADF) Configure Local Cloud Connection Follow the steps documented in the "Java Cloud Service ADF Web Application" article to configure a local database connection needed to create the ADFbc objects. Configure Libraries Add the 3rd party libraries into the class path. Create the following directory and copy the jar files into it: <JDEV_USER_HOME>/JcsRestDemo/lib  Select the "Model" project, navigate "Application -> Project Properties -> Libraries and Classpath -> Add JAR / Directory" and add the 2 3rd party libraries: Accessing Data from Taleo To access data from Taleo using the REST service the 3rd party libraries will be used. 2 Java classes are implemented, one representing the Candidate object and another for accessing the Taleo repository Candidate Candidate object is a POJO object used to represent the candidate data obtained from the Taleo repository. The data obtained will be used to populate the ADFbc object used to display the data on the UI. The candidate object contains simply the variables we obtain using the REST services and the getters / setters for them: Navigate "New -> General -> Java -> Java Class", enter "Candidate" as the name and create it in the package "oracle.apps.jcs.test.model".  Copy / paste the following as the content: import oracle.jbo.domain.Number; public class Candidate { private Number candId; private String firstName; private String lastName; public Candidate() { super(); } public Candidate(Number candId, String firstName, String lastName) { super(); this.candId = candId; this.firstName = firstName; this.lastName = lastName; } public void setCandId(Number candId) { this.candId = candId; } public Number getCandId() { return candId; } public void setFirstName(String firstName) { this.firstName = firstName; } public String getFirstName() { return firstName; } public void setLastName(String lastName) { this.lastName = lastName; } public String getLastName() { return lastName; } } Taleo Repository Taleo repository class will interact with the Taleo REST services. The logic will query data from Taleo and populate Candidate objects with the data. The Candidate object will then be used to populate the ADFbc object used to display data on the UI. Navigate "New -> General -> Java -> Java Class", enter "TaleoRepository" as the name and create it in the package "oracle.apps.jcs.test.model".  Copy / paste the following as the content (for details of the implementation refer to the documentation in the code): import com.sun.jersey.api.client.Client; import com.sun.jersey.api.client.ClientResponse; import com.sun.jersey.api.client.WebResource; import com.sun.jersey.core.util.MultivaluedMapImpl; import java.io.StringReader; import java.util.ArrayList; import java.util.Iterator; import java.util.List; import java.util.Map; import javax.ws.rs.core.MediaType; import javax.ws.rs.core.MultivaluedMap; import oracle.jbo.domain.Number; import org.json.simple.JSONArray; import org.json.simple.JSONObject; import org.json.simple.parser.JSONParser; /** * This class interacts with the Taleo REST services */ public class TaleoRepository { /** * Connection information needed to access the Taleo services */ String _company = null; String _userName = null; String _password = null; /** * Jersey client used to access the REST services */ Client _client = null; /** * Parser for processing the JSON objects used as * input / output for the services */ JSONParser _parser = null; /** * The base url for constructing the REST URLs. This is obtained * from Taleo with a service call */ String _baseUrl = null; /** * Authentication token obtained from Taleo using a service call. * The token can be used to authenticate on subsequent * service calls. The token will expire in 4 hours */ String _authToken = null; /** * Static url that can be used to obtain the url used to construct * service calls for a given company */ private static String _taleoUrl = "https://tbe.taleo.net/MANAGER/dispatcher/api/v1/serviceUrl/"; /** * Default constructor for the repository * Authentication details are passed as parameters and used to generate * authentication token. Note that each service call will * generate its own token. This is done to avoid dealing with the expiry * of the token. Also only 20 tokens are allowed per user simultaneously. * So instead for each call there is login / logout. * * @param company the company for which the service calls are made * @param userName the user name to authenticate with * @param password the password to authenticate with. */ public TaleoRepository(String company, String userName, String password) { super(); _company = company; _userName = userName; _password = password; _client = Client.create(); _parser = new JSONParser(); _baseUrl = getBaseUrl(); } /** * This obtains the base url for a company to be used * to construct the urls for service calls * @return base url for the service calls */ private String getBaseUrl() { String result = null; if (null != _baseUrl) { result = _baseUrl; } else { try { String company = _company; WebResource resource = _client.resource(_taleoUrl + company); ClientResponse response = resource.type(MediaType.APPLICATION_FORM_URLENCODED_TYPE).get(ClientResponse.class); String entity = response.getEntity(String.class); JSONObject jsonObject = (JSONObject)_parser.parse(new StringReader(entity)); JSONObject jsonResponse = (JSONObject)jsonObject.get("response"); result = (String)jsonResponse.get("URL"); } catch (Exception ex) { ex.printStackTrace(); } } return result; } /** * Generates authentication token, that can be used to authenticate on * subsequent service calls. Note that each service call will * generate its own token. This is done to avoid dealing with the expiry * of the token. Also only 20 tokens are allowed per user simultaneously. * So instead for each call there is login / logout. * @return authentication token that can be used to authenticate on * subsequent service calls */ private String login() { String result = null; try { MultivaluedMap<String, String> formData = new MultivaluedMapImpl(); formData.add("orgCode", _company); formData.add("userName", _userName); formData.add("password", _password); WebResource resource = _client.resource(_baseUrl + "login"); ClientResponse response = resource.type(MediaType.APPLICATION_FORM_URLENCODED_TYPE).post(ClientResponse.class, formData); String entity = response.getEntity(String.class); JSONObject jsonObject = (JSONObject)_parser.parse(new StringReader(entity)); JSONObject jsonResponse = (JSONObject)jsonObject.get("response"); result = (String)jsonResponse.get("authToken"); } catch (Exception ex) { throw new RuntimeException("Unable to login ", ex); } if (null == result) throw new RuntimeException("Unable to login "); return result; } /** * Releases a authentication token. Each call to login must be followed * by call to logout after the processing is done. This is required as * the tokens are limited to 20 per user and if not released the tokens * will only expire after 4 hours. * @param authToken */ private void logout(String authToken) { WebResource resource = _client.resource(_baseUrl + "logout"); resource.header("cookie", "authToken=" + authToken).post(ClientResponse.class); } /** * This method is used to obtain a list of candidates using a REST * service call. At this example the query is hard coded to query * based on status. The url constructed to access the service is: * <_baseUrl>/object/candidate/search.xml?status=16 * @return List of candidates obtained with the service call */ public List<Candidate> getCandidates() { List<Candidate> result = new ArrayList<Candidate>(); try { // First login, note that in finally block we must have logout _authToken = "authToken=" + login(); /** * Construct the URL, the resulting url will be: * <_baseUrl>/object/candidate/search.xml?status=16 */ MultivaluedMap<String, String> formData = new MultivaluedMapImpl(); formData.add("status", "16"); JSONArray searchResults = (JSONArray)getTaleoResource("object/candidate/search", "searchResults", formData); /** * Process the results, the resulting JSON object is something like * this (simplified for readability): * * { * "response": * { * "searchResults": * [ * { * "candidate": * { * "candId": 211, * "firstName": "Mary", * "lastName": "Stochi", * logic here will find the candidate object(s), obtain the desired * data from them, construct a Candidate object based on the data * and add it to the results. */ for (Object object : searchResults) { JSONObject temp = (JSONObject)object; JSONObject candidate = (JSONObject)findObject(temp, "candidate"); Long candIdTemp = (Long)candidate.get("candId"); Number candId = (null == candIdTemp ? null : new Number(candIdTemp)); String firstName = (String)candidate.get("firstName"); String lastName = (String)candidate.get("lastName"); result.add(new Candidate(candId, firstName, lastName)); } } catch (Exception ex) { ex.printStackTrace(); } finally { if (null != _authToken) logout(_authToken); } return result; } /** * Convenience method to construct url for the service call, invoke the * service and obtain a resource from the response * @param path the path for the service to be invoked. This is combined * with the base url to construct a url for the service * @param resource the key for the object in the response that will be * obtained * @param parameters any parameters used for the service call. The call * is slightly different depending whether parameters exist or not. * @return the resource from the response for the service call */ private Object getTaleoResource(String path, String resource, MultivaluedMap<String, String> parameters) { Object result = null; try { WebResource webResource = _client.resource(_baseUrl + path); ClientResponse response = null; if (null == parameters) response = webResource.header("cookie", _authToken).get(ClientResponse.class); else response = webResource.queryParams(parameters).header("cookie", _authToken).get(ClientResponse.class); String entity = response.getEntity(String.class); JSONObject jsonObject = (JSONObject)_parser.parse(new StringReader(entity)); result = findObject(jsonObject, resource); } catch (Exception ex) { ex.printStackTrace(); } return result; } /** * Convenience method to recursively find a object with an key * traversing down from a given root object. This will traverse a * JSONObject / JSONArray recursively to find a matching key, if found * the object with the key is returned. * @param root root object which contains the key searched for * @param key the key for the object to search for * @return the object matching the key */ private Object findObject(Object root, String key) { Object result = null; if (root instanceof JSONObject) { JSONObject rootJSON = (JSONObject)root; if (rootJSON.containsKey(key)) { result = rootJSON.get(key); } else { Iterator children = rootJSON.entrySet().iterator(); while (children.hasNext()) { Map.Entry entry = (Map.Entry)children.next(); Object child = entry.getValue(); if (child instanceof JSONObject || child instanceof JSONArray) { result = findObject(child, key); if (null != result) break; } } } } else if (root instanceof JSONArray) { JSONArray rootJSON = (JSONArray)root; for (Object child : rootJSON) { if (child instanceof JSONObject || child instanceof JSONArray) { result = findObject(child, key); if (null != result) break; } } } return result; } }   Creating Business Objects While JCS application can be created without a local database, the local database is required when using ADFbc objects even if database objects are not referred. For this example we will create a "Transient" view object that will be programmatically populated based the data obtained from Taleo REST services. Creating ADFbc objects Choose the "Model" project and navigate "New -> Business Tier : ADF Business Components : View Object". On the "Initialize Business Components Project" choose the local database connection created in previous step. On Step 1 enter "JcsRestDemoVO" on the "Name" and choose "Rows populated programmatically, not based on query": On step 2 create the following attributes: CandId Type: Number Updatable: Always Key Attribute: checked Name Type: String Updatable: Always On steps 3 and 4 accept defaults and click "Next".  On step 5 check the "Application Module" checkbox and enter "JcsRestDemoAM" as the name: Click "Finish" to generate the objects. Populating the VO To display the data on the UI the "transient VO" is populated programmatically based on the data obtained from the Taleo REST services. Open the "JcsRestDemoVOImpl.java". Copy / paste the following as the content (for details of the implementation refer to the documentation in the code): import java.sql.ResultSet; import java.util.List; import java.util.ListIterator; import oracle.jbo.server.ViewObjectImpl; import oracle.jbo.server.ViewRowImpl; import oracle.jbo.server.ViewRowSetImpl; // --------------------------------------------------------------------- // --- File generated by Oracle ADF Business Components Design Time. // --- Tue Feb 18 09:40:25 PST 2014 // --- Custom code may be added to this class. // --- Warning: Do not modify method signatures of generated methods. // --------------------------------------------------------------------- public class JcsRestDemoVOImpl extends ViewObjectImpl { /** * This is the default constructor (do not remove). */ public JcsRestDemoVOImpl() { } @Override public void executeQuery() { /** * For some reason we need to reset everything, otherwise * 2nd entry to the UI screen may fail with * "java.util.NoSuchElementException" in createRowFromResultSet * call to "candidates.next()". I am not sure why this is happening * as the Iterator is new and "hasNext" is true at the point * of the execution. My theory is that since the iterator object is * exactly the same the VO cache somehow reuses the iterator including * the pointer that has already exhausted the iterable elements on the * previous run. Working around the issue * here by cleaning out everything on the VO every time before query * is executed on the VO. */ getViewDef().setQuery(null); getViewDef().setSelectClause(null); setQuery(null); this.reset(); this.clearCache(); super.executeQuery(); } /** * executeQueryForCollection - overridden for custom java data source support. */ protected void executeQueryForCollection(Object qc, Object[] params, int noUserParams) { /** * Integrate with the Taleo REST services using TaleoRepository class. * A list of candidates matching a hard coded query is obtained. */ TaleoRepository repository = new TaleoRepository(<company>, <username>, <password>); List<Candidate> candidates = repository.getCandidates(); /** * Store iterator for the candidates as user data on the collection. * This will be used in createRowFromResultSet to create rows based on * the custom iterator. */ ListIterator<Candidate> candidatescIterator = candidates.listIterator(); setUserDataForCollection(qc, candidatescIterator); super.executeQueryForCollection(qc, params, noUserParams); } /** * hasNextForCollection - overridden for custom java data source support. */ protected boolean hasNextForCollection(Object qc) { boolean result = false; /** * Determines whether there are candidates for which to create a row */ ListIterator<Candidate> candidates = (ListIterator<Candidate>)getUserDataForCollection(qc); result = candidates.hasNext(); /** * If all candidates to be created indicate that processing is done */ if (!result) { setFetchCompleteForCollection(qc, true); } return result; } /** * createRowFromResultSet - overridden for custom java data source support. */ protected ViewRowImpl createRowFromResultSet(Object qc, ResultSet resultSet) { /** * Obtain the next candidate from the collection and create a row * for it. */ ListIterator<Candidate> candidates = (ListIterator<Candidate>)getUserDataForCollection(qc); ViewRowImpl row = createNewRowForCollection(qc); try { Candidate candidate = candidates.next(); row.setAttribute("CandId", candidate.getCandId()); row.setAttribute("Name", candidate.getFirstName() + " " + candidate.getLastName()); } catch (Exception e) { e.printStackTrace(); } return row; } /** * getQueryHitCount - overridden for custom java data source support. */ public long getQueryHitCount(ViewRowSetImpl viewRowSet) { /** * For this example this is not implemented rather we always return 0. */ return 0; } } Creating UI Choose the "ViewController" project and navigate "New -> Web Tier : JSF : JSF Page". On the "Create JSF Page" enter "JcsRestDemo" as name and ensure that the "Create as XML document (*.jspx)" is checked.  Open "JcsRestDemo.jspx" and navigate to "Data Controls -> JcsRestDemoAMDataControl -> JcsRestDemoVO1" and drag & drop the VO to the "<af:form> " as a "ADF Read-only Table": Accept the defaults in "Edit Table Columns". To execute the query navigate to to "Data Controls -> JcsRestDemoAMDataControl -> JcsRestDemoVO1 -> Operations -> Execute" and drag & drop the operation to the "<af:form> " as a "Button": Deploying to JCS Follow the same steps as documented in previous article"Java Cloud Service ADF Web Application". Once deployed the application can be accessed with URL: https://java-[identity domain].java.[data center].oraclecloudapps.com/JcsRestDemo-ViewController-context-root/faces/JcsRestDemo.jspx The UI displays a list of candidates obtained from the Taleo REST Services: Summary In this article we learned how to integrate with REST services using Jersey library in JCS. In future articles various other integration techniques will be covered.

  Read the article

• Unable to find class 'com.sun.facelets.FaceletViewHandler'

  - by Rafal

  Hi All, I have Richfaces application which I deploy to Glassfish v3. For many weeks (almost) everything works fine, but suddenly today a got following error. I have jsf-facelets-1.1.14.jar dependency in my pom.xml. I have no idea how to fix that. Help!! Source Document: jndi:/server/swmind.rcp.web/WEB-INF/faces-config.xml Cause: Unable to find class 'com.sun.facelets.FaceletViewHandler' at com.sun.faces.config.processor.AbstractConfigProcessor.createInstance(AbstractConfigProcessor.java:275) at com.sun.faces.config.processor.ApplicationConfigProcessor.setViewHandler(ApplicationConfigProcessor.java:527) at com.sun.faces.config.processor.ApplicationConfigProcessor.processViewHandlers(ApplicationConfigProcessor.java:847) at com.sun.faces.config.processor.ApplicationConfigProcessor.process(ApplicationConfigProcessor.java:331) at com.sun.faces.config.processor.AbstractConfigProcessor.invokeNext(AbstractConfigProcessor.java:114) at com.sun.faces.config.processor.LifecycleConfigProcessor.process(LifecycleConfigProcessor.java:116) at com.sun.faces.config.processor.AbstractConfigProcessor.invokeNext(AbstractConfigProcessor.java:114) at com.sun.faces.config.processor.FactoryConfigProcessor.process(FactoryConfigProcessor.java:223) at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:335) at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:223) at org.apache.catalina.core.StandardContext.contextListenerStart(StandardContext.java:4591) at com.sun.enterprise.web.WebModule.contextListenerStart(WebModule.java:535) at org.apache.catalina.core.StandardContext.start(StandardContext.java:5193) at com.sun.enterprise.web.WebModule.start(WebModule.java:499) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:928) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:912) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:694) at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1933) at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1605) at com.sun.enterprise.web.WebApplication.start(WebApplication.java:90) at org.glassfish.internal.data.EngineRef.start(EngineRef.java:126) at org.glassfish.internal.data.ModuleInfo.start(ModuleInfo.java:241) at org.glassfish.internal.data.ApplicationInfo.start(ApplicationInfo.java:236) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:339) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:183) at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:272) at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:305) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:320) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1176) at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$900(CommandRunnerImpl.java:83) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1235) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1224) at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:365) at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:204) at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166) at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:100) at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:245) at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791) at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693) at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954) at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170) at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88) at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76) at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53) at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57) at com.sun.grizzly.ContextTask.run(ContextTask.java:69) at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:330) at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:309) at java.lang.Thread.run(Thread.java:619) Caused by: java.lang.ClassNotFoundException: com.sun.facelets.FaceletViewHandler at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at org.glassfish.web.loader.WebappClassLoader.findClass(WebappClassLoader.java:949) at org.glassfish.web.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1420) at com.sun.faces.util.Util.loadClass(Util.java:203) at com.sun.faces.config.processor.AbstractConfigProcessor.loadClass(AbstractConfigProcessor.java:313) at com.sun.faces.config.processor.AbstractConfigProcessor.createInstance(AbstractConfigProcessor.java:240) ... 50 more

  Read the article

• Getting JAX-WS client work on Weblogic 9.2 with ant

  - by michuk

  I've recently had lots of issues trying to deploy a JAX-WS web servcie client on Weblogic 9.2. It turns out there is no straightforward guide on how to achieve this, so I decided to put together this short wiki entry hoping it might be useful for others. Firstly, Weblogic 9.2 does not support web servcies using JAX-WS in general. It comes with old versions of XML-related java libraries that are incompatible with the latest JAX-WS (similar issues occur with Axis2, only Axis1 seems to be working flawlessly with Weblogic 9.x but that's a very old and unsupported library). So, in order to get it working, some hacking is required. This is how I did it (note that we're using ant in our legacy corporate project, you probably should be using maven which should eliminate 50% of those steps below): Download the most recent JAX-WS distribution from https://jax-ws.dev.java.net/ (The exact version I got was JAXWS2.2-20091203.zip) Place the JAX-WS jars with the dependencies in a separate folder like lib/webservices. Create a patternset in ant to reference those jars: Include the patternset in your WAR-related goal. This could look something like: (not the flatten="true" parameter - it's important as Weblogic 9.x is by default not smart enough to access jars located in a different lcoation than WEB-INF/lib inside your WAR file) In case of clashes, Weblogic uses its own jars by default. We want it to use the JAX-WS jars from our application instead. This is achieved by preparing a weblogic-application.xml file and placing it in META-INF folder of the deplotyed EAR file. It should look like this: javax.jws. javax.xml.bind. javax.xml.crypto. javax.xml.registry. javax.xml.rpc. javax.xml.soap. javax.xml.stream. javax.xml.ws. com.sun.xml.api.streaming.* Remember to place that weblogic-application.xml file in your EAR! The ant goal for that may look similar to: <jar destfile="${warfile}" basedir="${wardir}"/> <ear destfile="${earfile}" appxml="resources/${app.name}/application.xml"> <fileset dir="${dist}" includes="${app.name}.war"/> <metainf dir="resources/META-INF"/> </ear> Also you need to tell weblogic to prefer your WEB-INF classes to those in distribution. You do that by placing the following lines in your WEB-INF/weblogic.xml file: true And that's it for the weblogic-related configuration. Now only set up your JAX-WS goal. The one below is going to simply generate the web service stubs and classes based on a locally deployed WSDL file and place them in a folder in your app: Remember about the keep="true" parameter. Without it, wsimport generates the classes and... deletes them, believe it or not! For mocking a web service I suggest using SOAPUI, an open source project. Very easy to deploy, crucial for web servcies intergation testing. We're almost there. The final thing is to write a Java class for testing the web service, try to run it as a standalone app first (or as part of your unit tests) And then try to run the same code from withing Weblogic. It should work. It worked for me. After some 3 days of frustration. And yes, I know I should've put 9 and 10 under a single bullet-point, but the title "10 steps to deploy a JAX-WS web service under Web logic 9.2 using ant" sounds just so much better. Please, edit this post and improve it if you find something missing!

  Read the article

• Errors rose when a Netbean Maven Project tries to run

  - by Zakaria

  Hi everybody, I installed NetBeans 6.8 on Vista and and I'm trying to execute a simple Maven Project. When I ran the project, I got this set of errors: WARNING: You are running embedded Maven builds, some build may fail due to incompatibilities with latest Maven release. To set Maven instance to use for building, click here. Scanning for projects... [#process-resources] [resources:resources] Using default encoding to copy filtered resources. [#compile] [compiler:compile] Nothing to compile - all classes are up to date [exec:exec] [EL Info]: 2010-04-04 18:22:54.907--ServerSession(15532856)--EclipseLink, version: Eclipse Persistence Services - 2.0.0.v20091127-r5931 [EL Severe]: 2010-04-04 18:22:54.929--ServerSession(15532856)--Local Exception Stack: Exception [EclipseLink-4003] (Eclipse Persistence Services - 2.0.0.v20091127-r5931): org.eclipse.persistence.exceptions.DatabaseException Exception in thread "main" javax.persistence.PersistenceException: Exception [EclipseLink-4003] (Eclipse Persistence Services - 2.0.0.v20091127-r5931): org.eclipse.persistence.exceptions.DatabaseException Exception Description: Configuration error. Class [org.apache.derby.jdbc.ClientDriver] not found. Exception Description: Configuration error. Class [org.apache.derby.jdbc.ClientDriver] not found. at org.eclipse.persistence.exceptions.DatabaseException.configurationErrorClassNotFound(DatabaseException.java:82) at org.eclipse.persistence.sessions.DefaultConnector.loadDriverClass(DefaultConnector.java:267) at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:85) at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:392) at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:151) at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:584) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:207) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:228) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:195) at com.mycompany.chapter2_ex1.Main.main(Main.java:31) Caused by: Exception [EclipseLink-4003] (Eclipse Persistence Services - 2.0.0.v20091127-r5931): org.eclipse.persistence.exceptions.DatabaseException Exception Description: Configuration error. Class [org.apache.derby.jdbc.ClientDriver] not found. at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:368) at org.eclipse.persistence.exceptions.DatabaseException.configurationErrorClassNotFound(DatabaseException.java:82) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:151) at org.eclipse.persistence.sessions.DefaultConnector.loadDriverClass(DefaultConnector.java:267) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:207) at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:85) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:195) at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162) at com.mycompany.chapter2_ex1.Main.main(Main.java:31) at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:584) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:228) at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:368) ... 4 more [ERROR]The following mojo encountered an error while executing: [ERROR]Group-Id: org.codehaus.mojo [ERROR]Artifact-Id: exec-maven-plugin [ERROR]Version: 1.1.1 [ERROR]Mojo: exec [ERROR]brought in via: Direct invocation [ERROR]While building project: [ERROR]Group-Id: com.mycompany [ERROR]Artifact-Id: chapter2_ex1 [ERROR]Version: 1.0-SNAPSHOT [ERROR]From file: C:\Users\Charlotte\Documents\NetBeansProjects\chapter2_ex1\pom.xml [ERROR]Reason: Result of cmd.exe /X /C ""C:\Program Files\Java\jdk1.6.0_11\bin\java.exe" -classpath C:\Users\Charlotte\Documents\NetBeansProjects\chapter2_ex1\target\classes;C:\Users\Charlotte\.m2\repository\javax\persistence\persistence-api\1.0\persistence-api-1.0.jar;C:\Users\Charlotte\.m2\repository\org\eclipse\persistence\javax.persistence\2.0.0\javax.persistence-2.0.0.jar;C:\Users\Charlotte\.m2\repository\org\eclipse\persistence\eclipselink\2.0.0-RC1\eclipselink-2.0.0-RC1.jar com.mycompany.chapter2_ex1.Main" execution is: '1'. ------------------------------------------------------------------------ For more information, run with the -e flag ------------------------------------------------------------------------ BUILD FAILED ------------------------------------------------------------------------ Total time: 3 seconds Finished at: Sun Apr 04 18:22:55 CEST 2010 Final Memory: 47M/94M ------------------------------------------------------------------------ Theses exceptions rose even if I can run the database by using the console (ij) and when I connect the Database, no errors are showing. Can you help me please? Thank you very much. Regards.

  Read the article

• Deploying an EAR to JBOSS times out (org.rhq.core.pc.inventory.TimeoutException:)

  - by rangalo

  Hi, I am trying to deploy an ear file to JBOSS AS (defalut server). The application is the mavenised version of examples of SeamInAction book. When I copy the file to $JBOSS_HOME/server/default/deploy, I don't get any exception but the application doesn't respond, after some time trying to access the application from the browser gives following in the log... While deploying with admin-console (http://localhost:8080/admin-console) I get following error messgae: PS: After this Jboss gets into unusable state. I cannot even access admin-console. I just have to kill it. ErrorMessage in admin-console: Failed to create Resource Open18.ear - cause: org.rhq.core.pc.inventory.TimeoutException: Call to [org.rhq.plugins.jbossas5.ApplicationServerComponent.createResource()] with args [[CreateResourceReport: ResourceType=[ResourceType[id=0, category=Service, name=Enterprise Application (EAR), plugin=JBossAS5]], ResourceKey=[null]]] timed out. Invocation thread will be interrupted at org.rhq.core.pc.inventory.ResourceContainer$ResourceComponentInvocationHandler.invokeInNewThreadWithLock(ResourceContainer.java:437) at org.rhq.core.pc.inventory.ResourceContainer$ResourceComponentInvocationHandler.invoke(ResourceContainer.java:406) at $Proxy266.createResource(Unknown Source) at org.rhq.core.pc.inventory.CreateResourceRunner.call(CreateResourceRunner.java:113) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:619) Error Logs: 4:08:58,555 INFO [TableMetadata] foreign keys: [fkaf42e01ba13c3380, fk_course_ref_facility] 14:08:58,555 INFO [TableMetadata] indexes: [course_pkey] 14:08:58,645 INFO [TableMetadata] table found: public.facility 14:08:58,645 INFO [TableMetadata] columns: [zip, phone, state, type, uri, city, country, id, price_range, address, county, description, nam e] 14:08:58,645 INFO [TableMetadata] foreign keys: [] 14:08:58,645 INFO [TableMetadata] indexes: [facility_pkey] 14:08:58,705 INFO [TableMetadata] table found: public.hole 14:08:58,705 INFO [TableMetadata] columns: [id, m_par, l_handicap, name, l_par, number, course_id, m_handicap] 14:08:58,705 INFO [TableMetadata] foreign keys: [fk_hole_ref_course, fk30f4c09c3f1200] 14:08:58,705 INFO [TableMetadata] indexes: [hole_pkey, uniq_hole_number] 14:08:58,764 INFO [TableMetadata] table found: public.tee 14:08:58,764 INFO [TableMetadata] columns: [hole_id, distance, tee_set_id] 14:08:58,764 INFO [TableMetadata] foreign keys: [fk1c014f8de7677, fk_tee_ref_hole, fk1c014c69de560, fk_tee_ref_tee_set] 14:08:58,764 INFO [TableMetadata] indexes: [tee_pkey] 14:08:58,826 INFO [TableMetadata] table found: public.tee_set 14:08:58,826 INFO [TableMetadata] columns: [id, color, m_slope_rating, l_slope_rating, name, course_id, m_course_rating, l_course_rating, p os] 14:08:58,826 INFO [TableMetadata] foreign keys: [fk_tee_set_ref_course, fkaa6881b79c3f1200] 14:08:58,826 INFO [TableMetadata] indexes: [tee_set_pkey, uniq_tee_set_pos, uniq_tee_set_color] 14:08:58,827 INFO [SchemaUpdate] schema update complete 14:08:58,829 INFO [NamingHelper] JNDI InitialContext properties:{java.naming.factory.initial=org.jnp.interfaces.NamingContextFactory, java. naming.factory.url.pkgs=org.jboss.naming:org.jnp.interfaces} 14:08:58,850 INFO [TomcatDeployment] deploy, ctxPath=/Open18 14:15:53,969 WARN [DiscoveryComponentProxyFactory] The discovery component for resource type [ResourceType[id=0, category=Service, name=Connector, plugin=JBossAS5]] has been blacklisted 14:15:53,970 WARN [InventoryManager] Failure during discovery for [Connector] Resources - failed after 300002 ms. org.rhq.core.pc.inventory.TimeoutException: Call to [org.rhq.plugins.jbossas5.ConnectorDiscoveryComponent.discoverResources()] with args [[org.rhq.core.pluginapi.inventory.ResourceDiscoveryContext@96db1]] timed out. Invocation thread will be interrupted at org.rhq.core.pc.util.DiscoveryComponentProxyFactory$ResourceDiscoveryComponentInvocationHandler.invokeInNewThread(DiscoveryComponentProxyFactory.java:208) at org.rhq.core.pc.util.DiscoveryComponentProxyFactory$ResourceDiscoveryComponentInvocationHandler.invoke(DiscoveryComponentProxyFactory.java:181) at $Proxy249.discoverResources(Unknown Source) at org.rhq.core.pc.inventory.InventoryManager.invokeDiscoveryComponent(InventoryManager.java:272) at org.rhq.core.pc.inventory.InventoryManager.executeComponentDiscovery(InventoryManager.java:1697) at org.rhq.core.pc.inventory.RuntimeDiscoveryExecutor.discoverForResource(RuntimeDiscoveryExecutor.java:218) at org.rhq.core.pc.inventory.RuntimeDiscoveryExecutor.discoverForResource(RuntimeDiscoveryExecutor.java:234) at org.rhq.core.pc.inventory.RuntimeDiscoveryExecutor.runtimeDiscover(RuntimeDiscoveryExecutor.java:134) at org.rhq.core.pc.inventory.RuntimeDiscoveryExecutor.call(RuntimeDiscoveryExecutor.java:94) at org.rhq.core.pc.inventory.RuntimeDiscoveryExecutor.call(RuntimeDiscoveryExecutor.java:51) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$301(ScheduledThreadPoolExecutor.java:98) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:207) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:619) 14:15:53,981 WARN [NavigationContent] Unable to find node for deleted resource [Resource[id=-5, type=Connector, key=ajp://127.0.0.1:8009, name=ajp://127.0.0.1:8009, parent=JBoss Web]].

  Read the article

• Is the Cloud ready for an Enterprise Java web application? Seeking a JEE hosting advice.

  - by Jakub Holý

  Greetings to all the smart people around here! I'd like to ask whether it is feasible or a good idea at all to deploy a Java enterprise web application to a Cloud such as Amazon EC2. More exactly, I'm looking for infrastructure options for an application that shall handle few hundred users with long but neither CPU nor memory intensive sessions. I'm considering dedicated servers, virtual private servers (VPSs) and EC2. I've noticed that there is a project called JBoss Cloud so people are working on enabling such a deployment, on the other hand it doesn't seem to be mature yet and I'm not sure that the cloud is ready for this kind of applications, which differs from the typical cloud-based applications like Twitter. Would you recommend to deploy it to the cloud? What are the pros and cons? The application is a Java EE 5 web application whose main function is to enable users to compose their own customized Product by combining the available Parts. It uses stateless and stateful session beans and JPA for persistence of entities to a RDBMS and fetches information about Parts from the company's inventory system via a web service. Aside of external users it's used also by few internal ones, who are authenticated against the company's LDAP. The application should handle around 300-400 concurrent users building their product and should be reasonably scalable and available though these qualities are only of a medium importance at this stage. I've proposed an architecture consisting of a firewall (FW) and load balancer supporting sticky sessions and https (in the Cloud this would be replaced with EC2's Elastic Load Balancing service and FW on the app. servers, in a physical architecture the load-balancer would be a HW), then two physical clustered application servers combined with web servers (so that if one fails, a user doesn't loose his/her long built product) and finally a database server. The DB server would need a slave backup instance that can replace the master instance if it fails. This should provide reasonable availability and fault tolerance and provide good scalability as long as a single RDBMS can keep with the load, which should be OK for quite a while because most of the operations are done in the memory using a stateful bean and only occasionally stored or retrieved from the DB and the amount of data is low too. A problematic part could be the dependency on the remote inventory system webservice but with good caching of its outputs in the application it should be OK too. Unfortunately I've only vague idea of the system resources (memory size, number and speed of CPUs/cores) that such an "average Java EE application" for few hundred users needs. My rough and mostly unfounded estimate based on actual Amazon offerings is that 1.7GB and a single, 2-core "modern CPU" with speed around 2.5GHz (the High-CPU Medium Instance) should be sufficient for any of the two application servers (since we can handle higher load by provisioning more of them). Alternatively I would consider using the Large instance (64b, 7.5GB RAM, 2 cores at 1GHz) So my question is whether such a deployment to the cloud is technically and financially feasible or whether dedicated/VPS servers would be a better option and whether there are some real-world experiences with something similar. Thank you very much! /Jakub Holy PS: I've found the JBoss EAP in a Cloud Case Study that shows that it is possible to deploy a real-world Java EE application to the EC2 cloud but unfortunately there're no details regarding topology, instance types, or anything :-(

  Read the article

• Conheça a nova Windows Azure

  - by Leniel Macaferi

  Hoje estamos lançando um grande conjunto de melhorias para a Windows Azure. A seguir está um breve resumo de apenas algumas destas melhorias: Novo Portal de Administração e Ferramentas de Linha de Comando O lançamento de hoje vem com um novo portal para a Windows Azure, o qual lhe permitirá gerenciar todos os recursos e serviços oferecidos na Windows Azure de uma forma perfeitamente integrada. O portal é muito rápido e fluido, suporta filtragem e classificação dos dados (o que o torna muito fácil de usar em implantações/instalações de grande porte), funciona em todos os navegadores, e oferece um monte de ótimos e novos recursos - incluindo suporte nativo à VM (máquina virtual), Web site, Storage (armazenamento), e monitoramento de Serviços hospedados na Nuvem. O novo portal é construído em cima de uma API de gerenciamento baseada no modelo REST dentro da Windows Azure - e tudo o que você pode fazer através do portal também pode ser feito através de programação acessando esta Web API. Também estamos lançando hoje ferramentas de linha de comando (que, igualmente ao portal, chamam as APIs de Gerenciamento REST) para tornar ainda ainda mais fácil a criação de scripts e a automatização de suas tarefas de administração. Estamos oferecendo para download um conjunto de ferramentas para o Powershell (Windows) e Bash (Mac e Linux). Como nossos SDKs, o código destas ferramentas está hospedado no GitHub sob uma licença Apache 2. Máquinas Virtuais ( Virtual Machines [ VM ] ) A Windows Azure agora suporta a capacidade de implantar e executar VMs duráveis/permanentes ??na nuvem. Você pode criar facilmente essas VMs usando uma nova Galeria de Imagens embutida no novo Portal da Windows Azure ou, alternativamente, você pode fazer o upload e executar suas próprias imagens VHD customizadas. Máquinas virtuais são duráveis ??(o que significa que qualquer coisa que você instalar dentro delas persistirá entre as reinicializações) e você pode usar qualquer sistema operacional nelas. Nossa galeria de imagens nativa inclui imagens do Windows Server (incluindo o novo Windows Server 2012 RC), bem como imagens do Linux (incluindo Ubuntu, CentOS, e as distribuições SUSE). Depois de criar uma instância de uma VM você pode facilmente usar o Terminal Server ou SSH para acessá-las a fim de configurar e personalizar a máquina virtual da maneira como você quiser (e, opcionalmente, capturar uma snapshot (cópia instantânea da imagem atual) para usar ao criar novas instâncias de VMs). Isto te proporciona a flexibilidade de executar praticamente qualquer carga de trabalho dentro da plataforma Windows Azure.   A novo Portal da Windows Azure fornece um rico conjunto de recursos para o gerenciamento de Máquinas Virtuais - incluindo a capacidade de monitorar e controlar a utilização dos recursos dentro delas.  Nosso novo suporte à Máquinas Virtuais também permite a capacidade de facilmente conectar múltiplos discos nas VMs (os quais você pode então montar e formatar como unidades de disco). Opcionalmente, você pode ativar o suporte à replicação geográfica (geo-replication) para estes discos - o que fará com que a Windows Azure continuamente replique o seu armazenamento em um data center secundário (criando um backup), localizado a pelo menos 640 quilômetros de distância do seu data-center principal. Nós usamos o mesmo formato VHD que é suportado com a virtualização do Windows hoje (o qual nós lançamos como uma especificação aberta), de modo a permitir que você facilmente migre cargas de trabalho existentes que você já tenha virtualizado na Windows Azure.  Também tornamos fácil fazer o download de VHDs da Windows Azure, o que também oferece a flexibilidade para facilmente migrar cargas de trabalho das VMs baseadas na nuvem para um ambiente local. Tudo o que você precisa fazer é baixar o arquivo VHD e inicializá-lo localmente - nenhuma etapa de importação/exportação é necessária. Web Sites A Windows Azure agora suporta a capacidade de rapidamente e facilmente implantar web-sites ASP.NET, Node.js e PHP em um ambiente na nuvem altamente escalável que te permite começar pequeno (e de maneira gratuita) de modo que você possa em seguida, adaptar/escalar sua aplicação de acordo com o crescimento do seu tráfego. Você pode criar um novo web site na Azure e tê-lo pronto para implantação em menos de 10 segundos: O novo Portal da Windows Azure oferece suporte integrado para a administração de Web sites, incluindo a capacidade de monitorar e acompanhar a utilização dos recursos em tempo real: Você pode fazer o deploy (implantação) para web-sites em segundos usando FTP, Git, TFS e Web Deploy. Também estamos lançando atualizações para as ferramentas do Visual Studio e da Web Matrix que permitem aos desenvolvedores uma fácil instalação das aplicações ASP.NET nesta nova oferta. O suporte de publicação do VS e da Web Matrix inclui a capacidade de implantar bancos de dados SQL como parte da implantação do site - bem como a capacidade de realizar a atualização incremental do esquema do banco de dados com uma implantação realizada posteriormente. Você pode integrar a publicação de aplicações web com o controle de código fonte ao selecionar os links "Set up TFS publishing" (Configurar publicação TFS) ou "Set up Git publishing" (Configurar publicação Git) que estão presentes no dashboard de um web-site: Ao fazer isso, você habilitará a integração com o nosso novo serviço online TFS (que permite um fluxo de trabalho do TFS completo - incluindo um build elástico e suporte a testes), ou você pode criar um repositório Git e referenciá-lo como um remote para executar implantações automáticas. Uma vez que você executar uma implantação usando TFS ou Git, a tab/guia de implantações/instalações irá acompanhar as implantações que você fizer, e permitirá que você selecione uma implantação mais antiga (ou mais recente) para que você possa rapidamente voltar o seu site para um estado anterior do seu código. Isso proporciona uma experiência de fluxo de trabalho muito poderosa.   A Windows Azure agora permite que você implante até 10 web-sites em um ambiente de hospedagem gratuito e compartilhado entre múltiplos usuários e bancos de dados (onde um site que você implantar será um dos vários sites rodando em um conjunto compartilhado de recursos do servidor). Isso te fornece uma maneira fácil para começar a desenvolver projetos sem nenhum custo envolvido. Você pode, opcionalmente, fazer o upgrade do seus sites para que os mesmos sejam executados em um "modo reservado" que os isola, de modo que você seja o único cliente dentro de uma máquina virtual: E você pode adaptar elasticamente a quantidade de recursos que os seus sites utilizam - o que te permite por exemplo aumentar a capacidade da sua instância reservada/particular de acordo com o aumento do seu tráfego: A Windows Azure controla automaticamente o balanceamento de carga do tráfego entre as instâncias das VMs, e você tem as mesmas opções de implantação super rápidas (FTP, Git, TFS e Web Deploy), independentemente de quantas instâncias reservadas você usar. Com a Windows Azure você paga por capacidade de processamento por hora - o que te permite dimensionar para cima e para baixo seus recursos para atender apenas o que você precisa. Serviços da Nuvem (Cloud Services) e Cache Distribuído (Distributed Caching) A Windows Azure também suporta a capacidade de construir serviços que rodam na nuvem que suportam ricas arquiteturas multicamadas, gerenciamento automatizado de aplicações, e que podem ser adaptados para implantações extremamente grandes. Anteriormente nós nos referíamos a esta capacidade como "serviços hospedados" - com o lançamento desta semana estamos agora rebatizando esta capacidade como "serviços da nuvem". Nós também estamos permitindo um monte de novos recursos com eles. Cache Distribuído Um dos novos recursos muito legais que estão sendo habilitados com os serviços da nuvem é uma nova capacidade de cache distribuído que te permite usar e configurar um cache distribuído de baixa latência, armazenado na memória (in-memory) dentro de suas aplicações. Esse cache é isolado para uso apenas por suas aplicações, e não possui limites de corte. Esse cache pode crescer e diminuir dinamicamente e elasticamente (sem que você tenha que reimplantar a sua aplicação ou fazer alterações no código), e suporta toda a riqueza da API do Servidor de Cache AppFabric (incluindo regiões, alta disponibilidade, notificações, cache local e muito mais). Além de suportar a API do Servidor de Cache AppFabric, esta nova capacidade de cache pode agora também suportar o protocolo Memcached - o que te permite apontar código escrito para o Memcached para o cache distribuído (sem que alterações de código sejam necessárias). O novo cache distribuído pode ser configurado para ser executado em uma de duas maneiras: 1) Utilizando uma abordagem de cache co-localizado (co-located). Nesta opção você aloca um percentual de memória dos seus roles web e worker existentes para que o mesmo seja usado ??pelo cache, e então o cache junta a memória em um grande cache distribuído.  Qualquer dado colocado no cache por uma instância do role pode ser acessado por outras instâncias do role em sua aplicação - independentemente de os dados cacheados estarem armazenados neste ou em outro role. O grande benefício da opção de cache "co-localizado" é que ele é gratuito (você não precisa pagar nada para ativá-lo) e ele te permite usar o que poderia ser de outra forma memória não utilizada dentro das VMs da sua aplicação. 2) Alternativamente, você pode adicionar "cache worker roles" no seu serviço na nuvem que são utilizados unicamente para o cache. Estes também serão unidos em um grande anel de cache distribuído que outros roles dentro da sua aplicação podem acessar. Você pode usar esses roles para cachear dezenas ou centenas de GBs de dados na memória de forma extramente eficaz - e o cache pode ser aumentado ou diminuído elasticamente durante o tempo de execução dentro da sua aplicação: Novos SDKs e Ferramentas de Suporte Nós atualizamos todos os SDKs (kits para desenvolvimento de software) da Windows Azure com o lançamento de hoje para incluir novos recursos e capacidades. Nossos SDKs estão agora disponíveis em vários idiomas, e todo o código fonte deles está publicado sob uma licença Apache 2 e é mantido em repositórios no GitHub. O SDK .NET para Azure tem em particular um monte de grandes melhorias com o lançamento de hoje, e agora inclui suporte para ferramentas, tanto para o VS 2010 quanto para o VS 2012 RC. Estamos agora também entregando downloads do SDK para Windows, Mac e Linux nos idiomas que são oferecidos em todos esses sistemas - de modo a permitir que os desenvolvedores possam criar aplicações Windows Azure usando qualquer sistema operacional durante o desenvolvimento. Muito, Muito Mais O resumo acima é apenas uma pequena lista de algumas das melhorias que estão sendo entregues de uma forma preliminar ou definitiva hoje - há muito mais incluído no lançamento de hoje. Dentre estas melhorias posso citar novas capacidades para Virtual Private Networking (Redes Privadas Virtuais), novo runtime do Service Bus e respectivas ferramentas de suporte, o preview público dos novos Azure Media Services, novos Data Centers, upgrade significante para o hardware de armazenamento e rede, SQL Reporting Services, novos recursos de Identidade, suporte para mais de 40 novos países e territórios, e muito, muito mais. Você pode aprender mais sobre a Windows Azure e se cadastrar para experimentá-la gratuitamente em http://windowsazure.com.  Você também pode assistir a uma apresentação ao vivo que estarei realizando às 1pm PDT (17:00Hs de Brasília), hoje 7 de Junho (hoje mais tarde), onde eu vou passar por todos os novos recursos. Estaremos abrindo as novas funcionalidades as quais me referi acima para uso público poucas horas após o término da apresentação. Nós estamos realmente animados para ver as grandes aplicações que você construirá com estes novos recursos. Espero que ajude, - Scott   Texto traduzido do post original por Leniel Macaferi.

  Read the article

• Introducing… SharePress!

  - by Bil Simser

  For those that follow me I’ve been away from blogging and twittering for a couple of months. This is the reason. For the last few months I’ve been working with a cross-functional team putting together a new product from the people that run WordPress, the free premiere blogging platform. The result is a new product we call SharePress, a highly extensible blogging and content management platform with the usability of WordPress and the power of SharePoint combined into a single product. SharePress gives you SharePoint sites that are SEO-friendly delivered with a Web 2.0 ease of use, leveraging all of the existing abilities of SharePoint and WordPress that we know today. The Reason Back in December I was approached by the WordPress team about building a new platform that took advantage of the power of SharePoint but the ease of WordPress. I’m no stranger to WordPress and it’s 5 minute no-holds-barred install (I’ve always wanted SharePoint to do this!) and I run my personal blog on WordPress as does my better half, Princess Jenn. There’s always been a pitch by so-called Web 2.0 applications to deliver the power of SharePoint but the ease of [insert product here] over the past year or so. I checked each and every one of them out, but they fell woefully short when it came to SharePoint’s document management, versioning, and customization. They try, but it’s never been up to par in my books. On the flipside, SharePoint has always been tops in collaboration in the Enterprise but it’s painful to develop web parts, UI customization can be tricky, and there’s just no user community for something as simple as themes and designs. The Product Enter SharePress. Is it SharePoint? Is it WordPress? It’s both, and neither. Everything you like about both products are there but this is a bold new product that is positioned to bring SharePoint to the masses while maintaining the fidelity of an Enterprise 2.0 collaboration platform. SharePress delivers on all fronts including: The ability to leverage any WordPress/Joomla/Drupal/DotNetNuke themes and skins inside of SharePoint Run any WordPress/Drupal/Joomla/DotNetNuke/SharePoint plug-in/module/web part/feature works out of the box with SharePress SEO-friendly URLs and pages Permalinks for all content All the features of SharePoint Server 2010 (including InfoPath, Excel, and Access services) included in the price Small deployment footprint. You decide how much to deploy and where. Independent Database Abstraction Layer (iDal) that allows you to deploy to SQL Server 2005/2008, MySQL, and PostgreSQL Portable Rendering Engine Layer (PREL) so you host .NET or PHP on Apache or IIS (version 7 or higher). The install feature is built around WordPress and it’s famous 5-minute install (actually, it’s never taken me more than 1 minute). SharePress installs with two screens after the files are uploaded to your server (which can be done entirely using FTP): After you enter two fields of information click “Install SharePress” and you’ll be done: No mess, no fuss, no complicated dependencies, and no server access required! How simpler could this be? The Technology WordPress plug-ins and themes working with SharePoint? Of course! The answer is IronPython which has now reached a maturity level capable of doing on the fly code language conversions. SharePress is a brand new product not built on top of any previous platform but leverages all the power of each of those applications through a patent pending technique called SharePress Multi-plAtfoRm Technology (SMART). SMART will convert PHP code on the fly into Python (using SWIG as an intermediate processor) which is then compiled to MSIL and then delivered back as an ASP.NET MVC application (output is C# or VB.NET, but you can build your own SMART converter to output a different language). Sound complicated? It is, but it’s all behind the scenes and you don’t have to worry about a thing. This image illustrates the technology stack and process: So users can load up out of the box PHP themes and plug-ins from the WordPress/Joomla/Drupal community into the SMART converter and output MSIL that is used by the SharePress engine and rendered on the fly to the end user. Supported PHP versions are 4.xx and 5.xx with version 6 support to come when it’s released. Similarly you can take any .NET application, DotNetNuke Module, SharePoint Web Part or event handler and feed it into the converter to output the same. Everything is reverse compiled into MSIL so it becomes technology agnostic. No source code access is needed and the SMART converter can handle obfuscated .NET assemblies that were built with .NET 1.0, 1.1, 2.0, 3.5, and 4.0. With this technology you can also with the flip of a switch have the output create PHP pages for you. This allows you to run SharePress on Unix based systems running PHP and MySQL, allowing you to deliver your SharePoint like experience to your users with a $0 infrastructure footprint. Here’s SharePress with the default WordPress post imported then a stock SharePoint collaboration site was imported. The site was then applied with the default Kubrick theme from WordPress. The Features Deploy any of the freely available 100,000 WordPress/Joomla/Drupal themes instantly to your runtime SharePress environment and preview or activate them right from your browser. Built-in Web 2.0 jQuery Enabled End User and Administrator Web Interface. Never have to remote into a server again! Run any SharePoint Web Part or Event Handler directly without modification or access to source code in SharePress. Use any WordPress/Joomla/Drupal plug-in directly in SharePress, no local admin or access to server. Just upload and activate. Upload and Activate any SharePoint Solution Package to any site remotely. No rebuilding. Changes made to sites require no compiling or rebuilding and are published immediately. Password Protected Content. You can give passwords to individual posts, articles, pages, documents, forms, and list items. A powerful polymorphic Captcha system backs the security interface and vendors can easily tie into smart card readers, fingerprint readers, and retina scanners for authorization and identification. OpenID, Windows Live, and Windows Authentication are supported out of the box. Infinitely customizable and extensible. You can leverage plug-ins from the open source community to do practically anything, all configured and uploaded via the browser. Additionally the developer API (available soon) allows you to build extensions in .NET, PHP, and Python with little effort. Easy Importing. We have importers for Blogger, WordPress, Drupal, Joomla, DotNetNuke, and SharePoint so you can populate your site quickly and easily with full metadata modeling and creation. Banner Management. It’s easy to setup banners for your web site complete with impression numbers, special URLs, and more. Menu Manager. The Menu Manager allows you to create as many menus as you want, each one can be associated to specific audiences or roles and then be styled across multiple contexts including the same menu delivered as a fly out, rollover, drop down, and just about any navigation you can think of. Collaborative ShareBook. Our exclusive book feature allows you to setup a “book” and then authorize individuals to contribute content. Permalinks. All content in SharePress has a permanent or “perma link” associated with it so people can link to it freely without fear of broken links. Apache or IIS, Unix / Linux / BSD / Solaris / Windows / Mac OS X support. Deliver SharePress the way *you* want from the platform *you* decide. Database Independence. We know people wanted to run on any database platform so SharePress is built on top of a database abstraction layer that allows you to run on SQL Server, MySQL, PostgreSQL. Other databases can be supported by writing a supporting database script consisting of fourteen function calls. The script can be written in Perl, Python, AWK, PowerShell, Unix Shell scripts, VBA, or simple DOS batch files. The Team SharePress is the work of a lot of people in both the WordPress and SharePoint community. I worked with a lot of SharePoint MVPs to create this new product as we really wanted to deliver the most compatible and feature rich system in a product that we would be proud of. Many thanks go out to Eli Bleeker, Todd Robillard, Scot Larson, Daniel Hillier, Shane Fox, Box Peran, Amanda English, and Bill Murray for doing the heavy lifting and all of their expertise and innovative thinking to get this product out. Licensing and Pricing SharePress is still in the final stages for pricing but we’re looking at a price point somewhere between $99-$100 to make it affordable for everyone. We plan to announce final pricing sometime in the next few weeks. There are no additional charges for Enterprise versions or additional features. Everything you see is what’s available and it’s just a matter of lighting up your site with whatever feature you want to enable. The product will not be open source but source code licenses will be available to ISVs who are interested in interfacing with the API at a low level. Cost will be $25,000 USD per developer and gives you complete access to the source code to the SharePress Foundation System and the .NET 4.0 Framework source code. Conclusion We hope you enjoy the launch of SharePress as the new premium blogging and content management platform for both Intranets and the Internet. We think we’ve build the best of breed solutions here and made it easy for anyone to get started with a minimal of infrastructure but allow the scalability of SharePress to shine through in the Enterprise 2.0 world. We encourage your feedback so please leave comments as to what you’re looking for in this system as we’re always evolving it to make it a better product for everyone.

  Read the article

• Using Oracle Enterprise Manager Ops Center to Update Solaris via Live Upgrade

  - by LeonShaner

  Introduction: This Oracle Enterprise Manager Ops Center blog entry provides tips for using Ops Center to update Solaris using Live Upgrade on Solaris 10 and Boot Environments on Solaris 11. Why use Live Upgrade? Live Upgrade (LU) can significantly reduce downtime associated with patching Live Upgrade avoids dropping to single-user mode for long periods of time during patching Live Upgrade relies on an Alternate Boot Environment (ABE)/(BE), which is patched while in multi-user mode; thereby allowing normal system operations to continue with the active BE, while the alternate BE is being patched Activating an newly patched (A)BE is essentially a reboot; therefore the downtime is ~= reboot Admins can easily revert to the prior Boot Environment (BE) as a safeguard / fallback. Why use Ops Center to patch via Live Upgrade, Alternate Boot Environments, and Solaris 11 equivalents? All the benefits of Ops Center's extensive patch and package knowledge base can be leveraged on top of Live Upgrade Ops Center can orchestrate patching based on Live Upgrade and Solaris 11 features, which all works together to minimize downtime Ops Centers advanced inventory and reporting features assurance that each OS is updated to a verifiable, consistent standard, rather than relying on ad-hoc (error prone) procedures and scripts Ops Center gives admins control over the boot environment specifications or they can let Ops Center decide when a BE is necessary, thereby reducing complexity and lowering the opportunity for user error Preparing to use Live Upgrade-like features in Solaris 11 Requirements and information you should know: Global Zone Root file-systems must be separate from Solaris Container / Zone filesystems Solaris 11 has features which are similar in concept to Live Upgrade on Solaris 10, but differ greatly in implementationImportant distinctions: Solaris 11 assumes ZFS root Solaris 11 adds Boot Environments (BE's) as an integrated feature (see beadm) Solaris 11 BE's avoid single-user patching (vs. Solaris 10 w/ ZFS snapshot=ABE). Solaris 11 Image Packaging System (IPS) has hooks for BE creation, as needed Solaris 11 allows pkgs to be installed + upgraded in alternate BE (e.g. instead of the live system) but it is controlled on a per-pkg basis Boot Environments are activated across a reboot; instead of spending long periods installing + upgrading packages in single user mode. Fallback to a prior BE is a function of the BE infrastructure (a la beadm). (Generally) Reboot + BE activation can be much much faster on Solaris 11 Preparing to use Live Upgrade on Solaris 10 Requirements and information you should know: Global Zone Root file-systems must be separate from Solaris Container / Zone filesystems Live Upgrade Pre-requisite patches must be applied before the first Live Upgrade Alternate Boot Environments are created (see "Pre-requisite Patches" section, below...) Solaris 10 Update 6 or newer on ZFS root is the practical starting point for Live Upgrade Live Upgrade with ZFS root is far more straight-forward than any scheme based on Alternative Boot Environments in slices or temporarily breaking mirrors Use Solaris best practices to upgrade the OS to at least Solaris 10 Update 4 (outside of Ops Center) UFS root can (technically) be used, but it is significantly more involved (e.g. discouraged) -- there are many reasons to move to ZFS while going through the process to update to Solaris 10 Update 6 or newer (out side of Ops Center) Recommendation: Start with Solaris 10 Update 6 or newer on ZFS root Recommendation: Start with Ops Center 12c or newer Ops Center 12c can automatically create your ABE's for you, without the need for custom scripts Ops Center 12c Update 2 avoids kernel panic on unpatched Solaris 10 update 9 (and older) -- unrelated to Live Upgrade, but more on the issue, below. NOTE: There is no magic!  If you have systems running Solaris 10 Update 5 or older on UFS root, and you don't know how to get them updated to Solaris 10 on ZFS root, then there are services available from Oracle Advanced Customer Support (ACS), which specialize in this area. Live Upgrade Pre-requisite Patches (Solaris 10) Certain Live Upgrade related patches must be present before the first Live Upgrade ABE's are created on Solaris 10.Use the following MOS Search String to find the “living document” that outlines the required patch minimums, which are necessary before using any Live Upgrade features: Solaris Live Upgrade Software Patch Requirements(Click above – the link is valid as of this writing, but search in MOS for the same "Solaris Live Upgrade Software Patch Requirements" string if necessary) It is a very good idea to check the document periodically and adapt to its contents, accordingly.IMPORTANT:  In case it wasn't clear in the above document, some direct patching of the active OS, including a reboot, may be required before Live Upgrade can be successfully used the first time.HINT: You can use Ops Center to determine what to expect for a given system, and to schedule the “pre-patching” during a maintenance window if necessary. Preparing to use Ops Center Discover + Manage (Install + Configure the Ops Center agent in) each Global Zone Recommendation:  Begin by using OCDoctor --agent-prereq to determine whether OS meets OC prerequisites (resolve any issues) See prior requirements and recommendations w.r.t. starting with Solaris 10 Update 6 or newer on ZFS (or at least Solaris 10 Update 4 on UFS, with caveats) WARNING: Systems running unpatched Solaris 10 update 9 (or older) should run the Ops Center 12c Update 2 agent to avoid a potential kernel panic The 12c Update 2 agent will check patch minimums and disable certain process accounting features if the kernel is not sufficiently patched to avoid the panic SPARC: 142900-05 Obsoleted by: 142900-06 SunOS 5.10: kernel patch 10 Oracle Solaris on SPARC (32-bit) X64: 142901-05 Obsoleted by: 142901-06 SunOS 5.10_x86: kernel patch 10 Oracle Solaris on x86 (32-bit) OR SPARC: 142909-17 SunOS 5.10: kernel patch 10 Oracle Solaris on SPARC (32-bit) X64: 142910-17 SunOS 5.10_x86: kernel patch 10 Oracle Solaris on x86 (32-bit) Ops Center 12c (initial release) and 12c Update 1 agent can also be safely used with a workaround (to be performed BEFORE installing the agent): # mkdir -p /etc/opt/sun/oc # echo "zstat_exacct_allowed=false" > /etc/opt/sun/oc/zstat.conf # chmod 755 /etc/opt/sun /etc/opt/sun/oc # chmod 644 /etc/opt/sun/oc/zstat.conf # chown -Rh root:sys /etc/opt/sun/oc NOTE: Remove the above after patching the OS sufficiently, or after upgrading to the 12c Update 2 agent Using Ops Center to apply Live Upgrade-related Pre-Patches (Solaris 10)Overview: Create an OS Update Profile containing the minimum LU-related pre-patches, based on the Solaris Live Upgrade Software Patch Requirements, previously mentioned. SIMULATE the deployment of the LU-related pre-patches Observe whether any of the LU-related pre-patches will require a reboot The job details for each Global Zone will advise whether a reboot step will be required ACTUALLY deploy the LU-related pre-patches, according to your change control process (e.g. if no reboot, maybe okay to do now; vs. must do later because of the reboot). You can schedule the job to occur later, during a maintenance window Check the job status for each node, resolving any issues found Once the LU-related pre-patches are applied, you can Ops Center to patch using Live Upgrade on Solaris 10 Using Ops Center to patch Solaris 10 with LU/ABE's -- the GOODS!(this is the heart of the tip): Create an OS Update Profile containing the patches that make up your standard build Use Solaris Baselines when possible Add other individual patches as needed ACTUALLY deploy the OS Update Profile Specify the appropriate Live Upgrade options, e.g. Synchronize the active BE to the alternate BE before patching Do not activate the BE after patching Check the job status for each node, resolving any issues found Activate the newly patched BE according to your change control process Activate = Reboot to the ABE, making the ABE the new active BE Ops Center does not separate LU activate from reboot, so expect a reboot! Check the job status for each node, resolving any issues found Examples (w/Screenshots) Solaris 10 and Live Upgrade: Auto-Create the Alternate Boot Environment (ZFS root only) ABE to be created on ZFS with name S10_12_07REC (Example) Uses built in feature to call “lucreate -n S10_12_07REC” behind scenes if not already present NOTE: Leave “lucreate” params blank (if you do specify options, the will be appended after -n $ABEName) Solaris 10 and Live Upgrade: Alternate Boot Environment Creation via Operational Profile (script) The Alternate Boot Environment is to be created via custom, user-supplied script, which does whatever is needed for the system where Live Upgrade will be used. Operational Profile, which provides the script to create an ABE: Very similar to the automatic case, but with a Script (Operational Profile), which is used to create the ABE Relies on user-supplied script in the form of an Operational Profile Could be used to prepare an ABE based on a UFS root in a slice, or on a separate device (e.g. by breaking a mirror first) – it is up to the script author to do the right thing! EXAMPLE: Same result as the ZFS case, but illustrating the Operational Profile (e.g. script) approach to call: # lucreate -n S10_1207REC NOTE: OC special variable is $ABEName Boot Environment Profile, which references the Operational Profile Script = Operational Profile on this screen Refers to Operational Profile shown in the previous section The user-supplied S10_Create_BE Operational Profile will be run The Operational Profile must send a non-zero exit code if there is a problem (so that the OS Update job will not proceed) Solaris 10 OS Update Profile (to provide the actual patch specifications) Solaris 10 Baseline “Recommended” chosen for “Install” Solaris 10 OS Update Plan (two-steps in this case) “Create a Boot Environment” + “Update OS” are chosen. Using Ops Center to patch Solaris 11 with Boot Environments (as needed) Create a Solaris 11 OS Update Profile containing the packages that make up your standard build ACTUALLY deploy the Solaris 11 OS Update Profile BE will be created if needed (or you can stipulate no BE) BE name will be auto-generated (if needed), or you may specify a BE name Check the job status for each node, resolving any issues found Check if a BE was created; if so, activate the new BE Activate = Reboot to the BE, making the new BE the active BE Ops Center does not separate BE activate from reboot NOTE: Not every Solaris 11 OS Update will require a new BE, so a reboot may not be necessary. Solaris 11: Auto BE Create (as Needed -- let Ops Center decide) BE to be created as needed BE to be named automatically Reboot (if necessary) deferred to separate step Solaris 11: OS Profile Solaris 11 “entire” chosen for a particular SRU Solaris 11: OS Update Plan (w/BE)  “Create a Boot Environment” + “Update OS” are chosen. Summary: Solaris 10 Live Upgrade, Alternate Boot Environments, and their equivalents on Solaris 11 can be very powerful tools to help minimize the downtime associated with updating your servers.  For very old Solaris, there are some important prerequisites to adhere to, but once the initial preparation is complete, Live Upgrade can be used going forward.  For Solaris 11, the built-in Boot Environment handling is leveraged directly by the Image Packaging System, and the result is a much more straight forward way to patch, and far fewer prerequisites to satisfy in getting there.  Ops Center simplifies using either approach, and helps you improve consistency from system to system, which ultimately helps you improve the overall up-time across all the Solaris systems in your environment. Please let us know what you think?  Until next time...\Leon-- Leon Shaner | Senior IT/Product ArchitectSystems Management | Ops Center Engineering @ Oracle The views expressed on this [blog; Web site] are my own and do not necessarily reflect the views of Oracle. For more information, please go to Oracle Enterprise Manager  web page or  follow us at :  Twitter | Facebook | YouTube | Linkedin | Newsletter

  Read the article

• Summary of Oracle E-Business Suite Technology Webcasts and Training

  - by BillSawyer

  Last Updated: November 16, 2011We're glad to hear that you've been finding our ATG Live Webcast series to be useful.  If you missed a webcast, you can download the presentation materials and listen to the recordings below. We're collecting other learning-related materials right now.  We'll update this summary with pointers to new training resources on an ongoing basis.  ATG Live Webcast Replays All of the ATG Live Webcasts are hosted by the Oracle University Knowledge Center.  In order to access the replays, you will need a free Oracle.com account. You can register for an Oracle.com account here.If you are a first-time OUKC user, you will have to accept the Terms of Use. Sign-in with your Oracle.com account, or if you don't already have one, use the link provided on the sign-in screen to create an account. After signing in, accept the Terms of Use. Upon completion of these steps, you will be directed to the replay. You only need to accept the Terms of Use once. Your acceptance will be noted on your account for all future OUKC replays and event registrations. 1. E-Business Suite R12 Oracle Application Framework (OAF) Rich User Interface Enhancements (Presentation) Prabodh Ambale (Senior Manager, ATG Development) and Gustavo Jiminez (Development Manager, ATG Development) offer a comprehensive review of the latest user interface enhancements and updates to OA Framework in EBS 12.  The webcast provides a detailed look at new features designed to enhance usability, including new capabilities for personalization and extensions, and features that support the use of dashboards and web services. (January 2011) 2. E-Business Suite R12 Service Oriented Architectures (SOA) Using the E-Business Suite Adapter (Presentation, Viewlet) Neeraj Chauhan (Product Manager, ATG Development) reviews the Service Oriented Architecture (SOA) capabilities within E-Business Suite 12, focussing on using the E-Business Suite Adapter to integrate EBS with third-party applications via web services, and orchestrate services and distributed transactions across disparate applications. (February 2011) 3. Deploying Oracle VM Templates for Oracle E-Business Suite and Oracle PeopleSoft Enterprise Applications Ivo Dujmovic (Director, ATG Development) reviews the latest capabilities for using Oracle VM to deploy virtualized EBS database and application tier instances using prebuilt EBS templates, wire those virtualized instances together using the EBS virtualization kit, and take advantage of live migration of user sessions between failing application tier nodes.  (February 2011) 4. How to Reduce Total Cost of Ownership (TCO) Using Oracle E-Business Suite Management Packs (Presentation) Angelo Rosado (Product Manager, ATG Development) provides an overview of how EBS sysadmins can make their lives easier with the Management Packs for Oracle E-Business Suite Release 12.  This session highlights key features in Application Management Pack (AMP) and Application Change Management Pack) that can automate or streamline system configurations, monitor EBS performance and uptime, keep multiple EBS environments in sync with patches and configurations, and create patches for your own EBS customizations and apply them with Oracle's own patching tools.  (June 2011) 5. Upgrading E-Business Suite 11i Customizations to R12 (Presentation) Sara Woodhull (Principal Product Manager, ATG Development) provides an overview of how E-Business Suite developers can manage and upgrade existing EBS 11i customizations to R12.  Sara covers methods for comparing customizations between Release 11i and 12, managing common customization types, managing deprecated technologies, and more. (July 2011) 6. Tuning All Layers of E-Business Suite (Part 1 of 3) (Presentation) Lester Gutierrez, Senior Architect, and Deepak Bhatnagar, Senior Manager, from the E-Business Suite Application Performance team, lead Tuning All Layers of E-Business Suite (Part 1 of 3). This webcast provides an overview of how Oracle E-Business Suite system administrators, DBAs, developers, and implementers can improve E-Business Suite performance by following a performance tuning framework. Part 1 focuses on the performance triage approach, tuning applications modules, upgrade performance best practices, and tuning the database tier. This ATG Live Webcast is an expansion of the performance sessions at conferences that are perennial favourites with hardcore Apps DBAs. (August 2011)  7. Oracle E-Business Suite Directions: Deployment and System Administration (Presentation) Max Arderius, Manager Applications Technology Group, and Ivo Dujmovic, Director Applications Technology group, lead Oracle E-Business Suite Directions: Deployment and System Administration covering important changes in E-Business Suite R12.2. The changes discussed in this presentation include Oracle E-Business Suite architecture, installation, upgrade, WebLogic Server integration, online patching, and cloning. This webcast provides an overview of how Oracle E-Business Suite system administrators, DBAs, developers, and implementers can prepare themselves for these changes in R12.2 of Oracle E-Business Suite. (October 2011) Oracle University Courses For a general listing of all Oracle University courses related to E-Business Suite Technology, use the Oracle University E-Business Suite Technology course catalog link. Oracle University E-Business Suite Technology Course Catalog 1. R12 Oracle Applications System Administrator Fundamentals In this course students learn concepts and functions that are critical to the System Administrator role in implementing and managing the Oracle E-Business Suite. Topics covered include configuring security and user management, configuring flexfields, managing concurrent processing, and setting up other essential features such as profile options and printing. In addition, configuration and maintenance of an Oracle E-Business Suite through Oracle Applications Manager is discussed. Students also learn the fundamentals of Oracle Workflow including its setup. The System Administrator Fundamentals course provides the foundation needed to effectively control security and ensure smooth operations for an E-Business Suite installation. Demonstrations and hands-on practice reinforce the fundamental concepts of configuring an Oracle E-Business Suite, as well as handling day-to-day system administrator tasks. 2. R12.x Install/Patch/Maintain Oracle E-Business Suite This course will be applicable for customers who have implemented Oracle E-Business Suite Release 12 or Oracle E-Business Suite 12.1. This course explains how to go about installing and maintaining an Oracle E-Business Suite Release 12.x system. Both Standard and Express installation types are covered in detail. Maintenance topics include a detailed examination of the standard tools and utilities, and an in-depth look at patching an Oracle E-Business Suite system. After this course, students will be able to make informed decisions about how to install an Oracle E-Business Suite system that meets their specific requirements, and how to maintain the system afterwards. The extensive hands-on practices include performing an installation on a Linux system, navigating the file system to locate key files, running the standard maintenance tools and utilities, applying patches, and carrying out cloning operations. 3. R12.x Extend Oracle Applications: Building OA Framework Applications This class is a hands-on lab-intensive course that will keep the student busy and active for the duration of the course. While the course covers the fundamentals that support OA Framework-based applications, the course is really an exercise in J2EE programming. Over the duration of the course, the student will create an OA Framework-based application that selects, inserts, updates, and deletes data from a R12 Oracle Applications instance. 4. R12.x Extend Oracle Applications: Customizing OA Framework Applications This course has been significantly changed from the prior version to include additional deployments. The course doesn't teach the specifics of configuration of each product. That is left to the product-specific courses. What the course does cover is the general methods of building, personalizing, and extending OA Framework-based pages within the E-Business Suite. Additionally, the course covers the methods to deploy those types of customizations. The course doesn't include discussion of the Oracle Forms-based pages within the E-Business Suite. 5. R12.x Extend Oracle Applications: OA Framework Personalizations Personalization is the ability within an E-Business Suite instance to make changes to the look and behavior of OA Framework-based pages without programming. And, personalizations are likely to survive patches and upgrades, increasing their utility. This course will systematically walk you through the myriad of personalization options, starting with simple examples and increasing in complexity from there. 6. E-Business Suite: BI Publisher 5.6.3 for Developers Starting with the basic concepts, architecture, and underlying standards of Oracle XML Publisher, this course will lead a student through a progress of exercises building their expertise. By the end of the course, the student should be able to create Oracle XML Publisher RTF templates and data templates. They should also be able to deploy and maintain a BI Publisher report in an E-Business Suite instance. Students will also be introduced to Oracle BI Publisher Enterprise. 7. R12.x Implement Oracle Workflow This course provides an overview of the architecture and features of Oracle Workflow and the benefits of using Oracle Workflow in an e-business environment. You can learn how to design workflow processes to automate and streamline business processes, and how to define event subscriptions to perform processing triggered by business events. Students also learn how to respond to workflow notifications, how to administer and monitor workflow processes, and what setup steps are required for Oracle Workflow. Demonstrations and hands-on practice reinforce the fundamental concepts. 8. R12.x Oracle E-Business Suite Essentials for Implementers Oracle R12.1 E-Business Essentials for Implementers is a course that provides a functional foundation for any E-Business Suite Fundamentals course.

  Read the article

• Windows Azure Evolution &ndash; TFS Integration (WAWS Part 2)

  - by Shaun

  So this is the fourth blog post about the new features of Windows Azure and the second part of Windows Azure Web Sites. But this is not just focus on the WAWS since the function I’m going to introduce is available in both Windows Azure Web Sites and Windows Azure Cloud Service (a.k.a. hosted service). In the previous post I talked about the Windows Azure Web Sites and how to use its gallery to build a WordPress personal blog without coding. Besides the gallery we can create an empty web site and upload our website from vary approaches. And one of the highlighted feature here is that, we can make our web site integrated with a source control service, such as TFS and Git, so that it will be deployed automatically once a new commit or build available.   Create New Empty Web Site In the developer portal when creating a new web site, we can select QUICK CREATE item. This will create an empty web site with only one shared instance without any database associated. Let’s specify the URL, region and subscription and click OK. After a few seconds our website will be ready. And now we can click the BROWSE button to open this empty website. As you can see there is a welcome page available in my website even thought I didn’t upload or deploy anything. This means even though the website will be charged even before anything was deployed, similar as the cloud service (hosted service). It is because once we created a website, Windows Azure platform had arranged a hosting process (w3wp.exe) in the group of virtual machines.   Create Project in TFS Preview Service and Setup Link Currently the Windows Azure Web Sites can integrate with TFS and Git as its deployment source, and it only support the Microsoft TFS Preview Service for now. I will not deep into how to use the TFS preview service in this post but once we click into the website we had just created and then clicked the “Set up TFS publishing”, there will be a dialog helping us to connect to this service. If you don’t have an account you can click the link shown below to request one. Assuming we have already had an account of TFS service then we need to create a new project firstly. Go to your TFS service website and create a new project, giving the project name, description and the process template. Then, back to the developer portal and clicked the “Set up TFS publishing” link. In the popping up window I will provide my TFS service URL and click the “Authorize now” link. Click “Accept” button to allow my windows azure to connect to my TFS service. Then it will be back to the developer portal and list all projects in my account. Just select the one I had just created and click OK. Then our website is linking to the TFS project I specified and finally it will show similar like this below. This means the web site had been linked to the TFS successfully.   Work with TFS Preview Service in VS2010 In the figure above there are some links to guide us how to connect to the TFS server through Visual Studio 2010 and 2012 RC. If you are using Visual Studio 2012 RC, you don’t need any extension. But if you are using Visual Studio 2010 you must have SP1 and KB2581206 installed. To connect to my TFS service just open the Visual Studio and in the Team Explorer, we can add a new TFS server and paste the URL of my TFS service from the developer portal. And select the project I had just created, then it will be listed in my Team Explorer. Now let’s start to build our website. Since the website we are going to build will be deployed to WAWS, it’s NOT a cloud service, NOT a web role. So in this case we need to create a normal ASP.NET web application. For example, an ASP.NET MVC 3 web application. Next, right click on the solution and select “Add Solution to Source Control”, select the project I had just created. Then check my code in. Once the check-in finished we can see that there is a build running in the TFS server. And if we back to the developer portal, we will see in our web site deployment page there’s a deployment running. In fact, once we linked our web site to our TFS then it will create a new build definition in our TFS project. It will be triggered by each check-in and deploy to the web site we linked automatically. So that when our code had been compiled it will be published to our web site from our TFS server. Once the build and deployment finished we can see it’s now active on our developer portal. Now we can see the web site that created from my Visual Studio and deployed by my TFS.   Continue Deployment through VS and TFS A big benefit when using TFS publishing is the continue deployment. Now if I changed some code in my Visual Studio, for example update some text on the home page and check in my changes, then it will trigger an new build and deploy to my WAWS automatically. And even more, if we wanted to rollback to a previous version we can just select an existing deployment listed in the portal and click REDEPLOY at the bottom.   Q&A: Can Web Site use Storage work with a Worker Role? Stacy asked a question in my previous post, which was “can a web site use Windows Azure Storage and furthermore working with a worker role”. Since the web site is deployed on the windows azure virtual machines in data center, it must be able to use all windows azure features such as the storage, SQL databases, CDN, etc.. But since when using web site we normally have a standard ASP.NET web application, PHP website or NodeJS, the windows azure SDK was not referenced by default. But we can add them by ourselves. In our sample project let’s right click on my MVC project and clicked the “Manage NuGet packages”. And in the dialog I will search windows azure packages and select the “Windows Azure Storage” to install. Then we will have the assemblies to access windows azure storage such as tables, queues and blobs. Since I have a storage account already, let’s have a quick demo, just to list all blobs in a container. The code would be like this. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6: using Microsoft.WindowsAzure; 7: using Microsoft.WindowsAzure.StorageClient; 8:  9: namespace WAASTFSDemo.Controllers 10: { 11: public class HomeController : Controller 12: { 13: public ActionResult Index() 14: { 15: ViewBag.Message = "Welcome to Windows Azure!"; 16:  17: var credentials = new StorageCredentialsAccountAndKey("[STORAGE_ACCOUNT]", "[STORAGE_KEY]"); 18: var account = new CloudStorageAccount(credentials, false); 19: var client = account.CreateCloudBlobClient(); 20: var container = client.GetContainerReference("shared"); 21: ViewBag.Blobs = container.ListBlobs().Select(b => b.Uri.AbsoluteUri); 22:  23: return View(); 24: } 25:  26: public ActionResult About() 27: { 28: return View(); 29: } 30: } 31: } 1: @{ 2: ViewBag.Title = "Home Page"; 3: } 4:  5: <h2>@ViewBag.Message</h2> 6: <p> 7: To learn more about ASP.NET MVC visit <a href="http://asp.net/mvc" title="ASP.NET MVC Website">http://asp.net/mvc</a>. 8: </p> 9: <div> 10: <ul> 11: @foreach (var blob in ViewBag.Blobs) 12: { 13: <li>@blob</li> 14: } 15: </ul> 16: </div> And then just check in the code, it will be deployed to my web site. Finally we can see the blobs in my storage.   This is just an example but it proves that web sites can connect to storage, table, blob and queue as well. So the answer to Stacy should be “yes”. The web site can use queue storage to work with worker role.   Summary In this post I demonstrated how to integrate with TFS from Windows Azure Web Sites. You can see our website can be built, uploaded and deployed automatically by TFS service. All we need to do is to provide the TFS name and select the project. Not only the Windows Azure Web Site, in this upgrade the Windows Azure Cloud Services (hosted service) can be published through TFS as well. Very similar as what we have shown below. But currently, only Microsoft TFS Service Preview can be integrated with Windows Azure. But I think in the future we can link the TFS in our enterprise and some 3rd party TFS such as CodePlex to Windows Azure.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Introduction to LinqPad Driver for StreamInsight 2.1

  - by Roman Schindlauer

  We are announcing the availability of the LinqPad driver for StreamInsight 2.1. The purpose of this blog post is to offer a quick introduction into the new features that we added to the StreamInsight LinqPad driver. We’ll show you how to connect to a remote server, how to inspect the entities present of that server, how to compose on top of them and how to manage their lifetime. Installing the driver Info on how to install the driver can be found in an earlier blog post here. Establishing connections As you click on the “Add Connection” link in the left pane you will notice that now it’s possible to build the data context automatically. The new driver appears as an option in the upper list, and if you pick it you will open a connection dialog that lets you connect to a remote StreamInsight server. The connection dialog lets you specify the address of the remote server. You will notice that it’s possible to pick up the binding information from the configuration file of the LinqPad application (which is normally in the same folder as LinqPad.exe and is called LinqPad.exe.config). In order for the context to be generated you need to pick an application from the server. The control is editable hence you can create a new application if you don’t want to make changes to an existing application. If you choose a new application name you will be prompted for confirmation before this gets created. Once you click OK the connection is created and you can start issuing queries against the remote server. If there’s any connectivity error the connection is marked with a red X and you can see the error message informing you what went wrong (i.e., the remote server could not be reached etc.). The context for remote servers Let’s take a look at what happens after we are connected successfully. Every LinqPad query runs inside a context – think of it as a class that wraps all the code that you’re writing. If you’re connecting to a live server the context will contain the following: The application object itself. All entities present in this application (sources, sinks, subjects and processes). The picture below shows a snapshot of the left pane of LinqPad after a successful connection. Every entity on the server has a different icon which will allow users to figure out its purpose. You will also notice that some entities have a string in parentheses following the name. It should be interpreted as such: the first name is the name of the property of the context class and the second name is the name of the entity as it exists on the server. Not all valid entity names are valid identifier names so in cases where we had to make a transformation you see both. Note also that as you hover over the entities you get IntelliSense with their types – more on that later. Remoting is not supported As you play with the entities exposed by the context you will notice that you can’t read and write directly to/from them. If for instance you’re trying to dump the content of an entity you will get an error message telling you that in the current version remoting is not supported. This is because the entity lives on the remote server and dumping its content means reading the events produced by this entity into the local process. ObservableSource.Dump(); Will yield the following error: Reading from a remote 'System.Reactive.Linq.IQbservable`1[System.Int32]' is not supported. Use the 'Microsoft.ComplexEventProcessing.Linq.RemoteProvider.Bind' method to read from the source using a remote observer. This basically tells you that you can call the Bind() method to direct the output of this source to a sink that has to be defined on the remote machine as well. You can’t bring the results to the LinqPad window unless you write code specifically for that. Compose queries You may ask – what's the purpose of all that? After all the same information is present in the EventFlowDebugger, why bother with showing it in LinqPad? First of all, What gets exposed in LinqPad is not what you see in the debugger. In LinqPad we have a property on the context class for every entity that lives on the server. Because LinqPad offers IntelliSense we in fact have much more information about the entity, and more importantly we can compose with that entity very easily. For example, let’s say that this code creates an entity: using (var server = Server.Connect(...)) {     var a = server.CreateApplication("WhiteFish");     var src = a         .DefineObservable<int>(() => Observable.Range(0, 3))         .Deploy("ObservableSource"); If later we want to compose with the source we have to fetch it and then we can bind something to     a.GetObservable<int>("ObservableSource)").Bind(... This means that we had to know a bunch of things about this: that it’s a source, that it’s an observable, it produces a result with payload Int32 and it’s named “ObservableSource”. Only the second and last bits of information are present in the debugger, by the way. As you type in the query window you see that all the entities are present, you get IntelliSense support for them and it’s much easier to make sense of what’s available. Let’s look at a scenario where composition is plausible. With the new programming model it’s possible to create “cold” sources that are parameterized. There was a way to accomplish that even in the previous version by passing parameters to the adapters, but this time it’s much more elegant because the expression declares what parameters are required. Say that we hover the mouse over the ThrottledSource source – we will see that its type is Func<int, int, IQbservable<int>> - this in effect means that we need to pass two int parameters before we can get a source that produces events, and the type for those events is int – in the particular case of my example I had the source produce a range of integers and the two parameters were the start and end of the range. So we see how a developer can create a source that is not running yet. Then someone else (e.g. an administrator) can pass whatever parameters appropriate and run the process. Proxy Types Here’s an interesting scenario – what if someone created a source on a server but they forgot to tell you what type they used. Worse yet, they might have used an anonymous type and even though they can refer to it by name you can’t figure out how to use that type. Let’s walk through an example that shows how you can compose against types you don’t need to have the definition of. This is how we can create a source that returns an anonymous type: Application.DefineObservable(() => Observable.Range(1, 10).Select(i => new { I = i })).Deploy("O1"); Now if we refresh the connection we can see the new source named O1 appear in the list. But what’s more important is that we now have a type to work with. So we can compose a query that refers to the anonymous type. var threshold = new StreamInsightDynamicDriver.TypeProxies.AnonymousType1_0<int>(5); var filter = from i in O1              where i > threshold              select i; filter.Deploy("O2"); You will notice that the anonymous type defined with this statement: new { I = i } can now be manipulated by a client that does not have access to it because the LinqPad driver has generated another type in its stead, named StreamInsightDynamicDriver.TypeProxies.AnonymousType1_0. This type has all the properties and fields of the type defined on the server, except in this case we can instantiate values and use it to compose more queries. It is worth noting that the same thing works for types that are not anonymous – the test is if the LinqPad driver can resolve the type or not. If it’s not possible then a new type will be generated that approximates the type that exists on the server. Control metadata In addition to composing processes on top of the existing entities we can do other useful things. We can delete them – nothing new here as we simply access the entities through the Entities collection of the application class. Here is where having their real name in parentheses comes handy. There’s another way to find out what’s behind a property – dump its expression. The first line in the output tells us what’s the name of the entity used to build this property in the context. Runtime information So let’s create a process to see what happens. We can bind a source to a sink and run the resulting process. If you right click on the connection you can refresh it and see the process present in the list of entities. Then you can drag the process to the query window and see that you can have access to process object in the Processes collection of the application. You can then manipulate the process (delete it, read its diagnostic view etc.). Regards, The StreamInsight Team

  Read the article

• Introduction to LinqPad Driver for StreamInsight 2.1

  - by Roman Schindlauer

  We are announcing the availability of the LinqPad driver for StreamInsight 2.1. The purpose of this blog post is to offer a quick introduction into the new features that we added to the StreamInsight LinqPad driver. We’ll show you how to connect to a remote server, how to inspect the entities present of that server, how to compose on top of them and how to manage their lifetime. Installing the driver Info on how to install the driver can be found in an earlier blog post here. Establishing connections As you click on the “Add Connection” link in the left pane you will notice that now it’s possible to build the data context automatically. The new driver appears as an option in the upper list, and if you pick it you will open a connection dialog that lets you connect to a remote StreamInsight server. The connection dialog lets you specify the address of the remote server. You will notice that it’s possible to pick up the binding information from the configuration file of the LinqPad application (which is normally in the same folder as LinqPad.exe and is called LinqPad.exe.config). In order for the context to be generated you need to pick an application from the server. The control is editable hence you can create a new application if you don’t want to make changes to an existing application. If you choose a new application name you will be prompted for confirmation before this gets created. Once you click OK the connection is created and you can start issuing queries against the remote server. If there’s any connectivity error the connection is marked with a red X and you can see the error message informing you what went wrong (i.e., the remote server could not be reached etc.). The context for remote servers Let’s take a look at what happens after we are connected successfully. Every LinqPad query runs inside a context – think of it as a class that wraps all the code that you’re writing. If you’re connecting to a live server the context will contain the following: The application object itself. All entities present in this application (sources, sinks, subjects and processes). The picture below shows a snapshot of the left pane of LinqPad after a successful connection. Every entity on the server has a different icon which will allow users to figure out its purpose. You will also notice that some entities have a string in parentheses following the name. It should be interpreted as such: the first name is the name of the property of the context class and the second name is the name of the entity as it exists on the server. Not all valid entity names are valid identifier names so in cases where we had to make a transformation you see both. Note also that as you hover over the entities you get IntelliSense with their types – more on that later. Remoting is not supported As you play with the entities exposed by the context you will notice that you can’t read and write directly to/from them. If for instance you’re trying to dump the content of an entity you will get an error message telling you that in the current version remoting is not supported. This is because the entity lives on the remote server and dumping its content means reading the events produced by this entity into the local process. ObservableSource.Dump(); Will yield the following error: Reading from a remote 'System.Reactive.Linq.IQbservable`1[System.Int32]' is not supported. Use the 'Microsoft.ComplexEventProcessing.Linq.RemoteProvider.Bind' method to read from the source using a remote observer. This basically tells you that you can call the Bind() method to direct the output of this source to a sink that has to be defined on the remote machine as well. You can’t bring the results to the LinqPad window unless you write code specifically for that. Compose queries You may ask – what's the purpose of all that? After all the same information is present in the EventFlowDebugger, why bother with showing it in LinqPad? First of all, What gets exposed in LinqPad is not what you see in the debugger. In LinqPad we have a property on the context class for every entity that lives on the server. Because LinqPad offers IntelliSense we in fact have much more information about the entity, and more importantly we can compose with that entity very easily. For example, let’s say that this code creates an entity: using (var server = Server.Connect(...)) {     var a = server.CreateApplication("WhiteFish");     var src = a         .DefineObservable<int>(() => Observable.Range(0, 3))         .Deploy("ObservableSource"); If later we want to compose with the source we have to fetch it and then we can bind something to     a.GetObservable<int>("ObservableSource)").Bind(... This means that we had to know a bunch of things about this: that it’s a source, that it’s an observable, it produces a result with payload Int32 and it’s named “ObservableSource”. Only the second and last bits of information are present in the debugger, by the way. As you type in the query window you see that all the entities are present, you get IntelliSense support for them and it’s much easier to make sense of what’s available. Let’s look at a scenario where composition is plausible. With the new programming model it’s possible to create “cold” sources that are parameterized. There was a way to accomplish that even in the previous version by passing parameters to the adapters, but this time it’s much more elegant because the expression declares what parameters are required. Say that we hover the mouse over the ThrottledSource source – we will see that its type is Func<int, int, IQbservable<int>> - this in effect means that we need to pass two int parameters before we can get a source that produces events, and the type for those events is int – in the particular case of my example I had the source produce a range of integers and the two parameters were the start and end of the range. So we see how a developer can create a source that is not running yet. Then someone else (e.g. an administrator) can pass whatever parameters appropriate and run the process. Proxy Types Here’s an interesting scenario – what if someone created a source on a server but they forgot to tell you what type they used. Worse yet, they might have used an anonymous type and even though they can refer to it by name you can’t figure out how to use that type. Let’s walk through an example that shows how you can compose against types you don’t need to have the definition of. This is how we can create a source that returns an anonymous type: Application.DefineObservable(() => Observable.Range(1, 10).Select(i => new { I = i })).Deploy("O1"); Now if we refresh the connection we can see the new source named O1 appear in the list. But what’s more important is that we now have a type to work with. So we can compose a query that refers to the anonymous type. var threshold = new StreamInsightDynamicDriver.TypeProxies.AnonymousType1_0<int>(5); var filter = from i in O1              where i > threshold              select i; filter.Deploy("O2"); You will notice that the anonymous type defined with this statement: new { I = i } can now be manipulated by a client that does not have access to it because the LinqPad driver has generated another type in its stead, named StreamInsightDynamicDriver.TypeProxies.AnonymousType1_0. This type has all the properties and fields of the type defined on the server, except in this case we can instantiate values and use it to compose more queries. It is worth noting that the same thing works for types that are not anonymous – the test is if the LinqPad driver can resolve the type or not. If it’s not possible then a new type will be generated that approximates the type that exists on the server. Control metadata In addition to composing processes on top of the existing entities we can do other useful things. We can delete them – nothing new here as we simply access the entities through the Entities collection of the application class. Here is where having their real name in parentheses comes handy. There’s another way to find out what’s behind a property – dump its expression. The first line in the output tells us what’s the name of the entity used to build this property in the context. Runtime information So let’s create a process to see what happens. We can bind a source to a sink and run the resulting process. If you right click on the connection you can refresh it and see the process present in the list of entities. Then you can drag the process to the query window and see that you can have access to process object in the Processes collection of the application. You can then manipulate the process (delete it, read its diagnostic view etc.). Regards, The StreamInsight Team

  Read the article

• CodePlex Daily Summary for Wednesday, June 11, 2014

  CodePlex Daily Summary for Wednesday, June 11, 2014Popular Releasescrashme: crashme 2.8.4 for 64 bit Windows: This release has new functionality that makes crashme potent in 64-bit processor architectures. This potency has been generally absent for several years, ever since Data Execution Prevention (DEP) became the default setting in most operating systems. After installation the TEST1.BAT short-cut will produce CRASHME-TEST1-MT.LOG containing the following process fatal exit exceptions after a 30-second run: EXCEPTION_SINGLE_STEP EXCEPTION_FLT_OVERFLOW EXCEPTION_DATATYPE_MISALIGNMENT EXCEPT...Random Execute: Random Execute Alpha Release: This release is the Alpha Release and more functionality to come based upon your feedback. Thanks!Bango Payment Flow in-app payments: Bango Payment Flow in-app payments example app: Sample application that uses the Bango Payment Flow SDKEssence#: Ark-2: The Ark-2 release provides fixes for bugs and for increased stability and robustness. It also features significant performance improvements. The only directly-visible difference is that the optional "Script run time" timing report no longer includes the time to setup and run the compiler, so it's a pure benchmark of the time required to actually execute a script.VidCoder: 1.5.23 Beta: Added first translations for 1.5. Includes new languages Portuguese, Japanese, Chinese Simplified and Czech. Many of these translations are still incomplete: you can help out on Crowdin. Added an option to pass through an input track if it matches the output codec. Updated HandBrake core to SVN 6209. Fixed crash on AAC passthrough. Fixed x264 settings getting set incorrectly when reverting from a preset with the Advanced tab. Fixed occasional crash when calculating remaining time. ...Bills Manager: Bills Manager (32227): New stable releasePowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.4: Added New-Folder and Remove-Folder functions (Thanks to SueH) Added NoWait parameter to Execute-Process Added the ability for Deploy-Application.exe to point to a different .ps1 file by specifying it on the command-line Added checks to Deploy-Application.exe to verify the AppDeployToolkit folder exists Added PSAppDeployToolkit icon to Deploy-Application.exe Fixed issue where hang could occur if file version was null when using Get-FileVersion Improved exception handling and loggin...Three-Dimensional Maneuver Gear for Minecraft: TDMG 1.1.1.1 for 1.7.2: 1.7.2??? ?????????ID?????? ?????jar?????CS-Script Source: Release v3.8.1: Improved ConfigConsole AdvancedShell extensions support cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationPapercut: Papercut v3.0.0.0: Papercut has switched to semantic versioning! That means you will have to uninstall old "clickonce" versions to get the latest as it will see it as an older version. Latest Has Tons of New Features: Modern UI MVVM Architecture Watch Directories for New Messages Optional Backend Papercut Service Load on Windows Startup Attachments/Mime SectionsExperfwiz (Exchange Performance Data Collection tool): Experfwiz 1.3.8: List of updates in 1.3.8 Added support for Windows 2012 & 2012 R2 (for future use) Added support for Exchange 2013 Full is now enabled by default. To disable full mode, use 'nofull'. Exchange 2013 requires full. Added "\Processor Information()\" counters to Exchange 2010 full Blocked Exmon execution on Exchange 2013BugNET Issue Tracker: BugNET 1.6: Version 1.6 is a major upgrade to the latest frameworks and components by Microsoft. It includes a major UI overhaul using the bootstrap framework to have a modern, mobile friendly and easily customized layout. Upgrade to .NET 4.5 ASP.NET social auth Add script bundling and optimization Improvements for mobile devices Bootstrap (UI overhaul) Rewritten / friendly URL's Please read our release notes for BugNET 1.6: http://blog.bugnetproject.com/2014/06/08/bugnet-1-6-and-bugnet-pro-1...SFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun Einstellbarbabelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...ClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.New ProjectsAge of Visual: Proyecto que representa un juego de estrategiaAliexpress: Aliexpress Bell Open Imaging package: Bell Imaging package is an advanced and open source imaging libary. You can use it's code or various actions of editing, viewing and processing images.BizTalk Benchmark Analyzer: Benchmark any application and analyze the results to enable a better result when performance optimizing your solution.CheckName: This is a CheckNameDelsjömotet: Code for Windows Phone 8 application that will tell commuters of Västtrafik the next trip from and to Delsjömotet outside Gothenburg.EasyTest: This is a Webdriver Framework for creating enterprise level UI test suites. FIM Workflow Library: The FIM Workflow Library is a collection of custom FIM workflow activitiesjwkjReport: jwkjReport DesingerLF3Proj: project for lf OLEDB Wrapper for Excel and Textfiles: this project is for accessing excel and write values in excel it is just a wrapper for accessing excel using SQLPoshAsyncJob: Provides an alternative to PSjobs with greater performance and less overhead to run commands in the background, freeing up the console.proxydelivery: my proxy deliverySlingshot: Pending...Speech Synthesizer Bee .NetMF Driver: ????????Speech Synthesizer Bee???????.net micro framework???????; ??SYN6288????????; ???????netduino plus 2,?????.net micro frame??????-??????【??】: ?????????????????,??????????、??????,??????????、????、????、???????。?????-?????【??】: ?????????????????????,????????,??????????,?????,????? ,????????!?????-?????【??】: ?????????????????????,???????????????,???????,?????,?????,????? !!!??????-??????【??】: ????????????????、????、????、??????、????、????????,????????、?????????,?????。??????-??????【??】: ?????????????????,?????????????。????????????,???????,???????,?????,?????。????-????【??】: ????????????????:?????? ???? ??????,???????,??????,???????。?????-?????【??】: ???????????,????,??????????? ???? ???? ?????????,???,??,??????????-?????【??】: ?????????????????????????,???????????,????????,?????????????????????。???????-???????【??】: ?????????????????????,????????????????,????????????????,??????！???????-???????【??】: ???????????????????????,????“???????,???????”?????,????????????！?????-?????【??】: ????????????????,??????????????、???????、???????、???????、?????！??????-??????【??】: ????????????????,????,????,??????,????“????、????、????、????”????????,????????????-??????【??】: ????????????????????,????????:??、??、???,?????????????????????!??????-??????【??】: ??????????????????????????,???????????????,????????????????。??????-??????【??】: ???????????????,?????????????。?????????????,?????????,???????。??????-??????【??】: ??????????????????????????????、??????????????,??????????????。????-????【??】: ????????????:????,????,????,???????,????????,??????:????????,?????!????-????【??】: ???????????????"????,????"???,????????????????????????,??????????????。??????-??????【??】: ????????????????????,????????????,?????????????????,??????,????????!??????-??????【??】: ????????????????,???????、???????????,????????,????,?????????,??????,??????!?????-?????【??】: ???????????????????,????:????,????,????,??????,?????,???????????????!?????-?????【??】: ?????????????????,???????、????、????、??????、???????,??????,???????????。?????-?????【??】: ???????,??????,?????????????????????,???????????????????????。??????-??????【??】: ??????????????????,????????,??????????????,?????????,????,????,??????。??????-??????【??】: ??????????????、?????????,?????????,????,????????,????????????????!????-????【??】: ????????????????,???????????,??????????????,??????????，??????????????！?????-?????【??】: ?????????????????,????(??)????????，??????，????，???，????，???????!?????-?????【??】: ?????????????????????????,?????????,??????????,????????,?????!?????-?????【??】: ??????????????,???????????????,?????????????。??????-??????【??】: ??????????????????????,???????????????,????????????????????!?????-?????【??】: ?????????????????、????,??100%????,??????,????????????,???????????!?????-?????【??】: ???????????????????,??????????,????????、????,??????????,??????????。??????-??????【??】: ????????????、???、??、??????????????????????????????,????????????????!????-????【??】: ??????????????,????,????,??????,????“????、????、????、????”????????,??????.?????-?????【??】: ???????????????????,????????:??、??、???,?????????????????????!?????-?????【??】: ???????????????8?，????????,????????,??????????,?????,????? ,????????!??????-??????【??】: ?????????????????????????????、????、????、???????????,????,????!?????-?????【??】: ???????????????6?,???????????????????????????,??????????????,?????????！?????-?????【??】: ????????????、??????????????????,????????,?????,??????,????,????,????!??????-??????【??】: ????????????????????????、??????,????、?????、????， ?????????，?????????????！??????-??????【??】: ??????????????????、????、??????、????????,????????????,???????????！??????-??????【??】: ??????????????????????????????,???????????????????????,???????。????-????【??】: ???????????????????、????、????、??????、???????,??????、??????。????-????【??】: ?????????????、????、????、??????、????、???????,?????,?????????!??????-??????【??】: ????????????????,?????????????? ??。????????、????、????、?????????? ???????。??????-??????【??】: ??????????????????????????,????,????,??????????。???????????????,??,??,??????????,??????...????-????【??】: ???????????????????????????,??????????,????,????,?????????、??????,??????。?????-?????【??】: ??????????????????????:????、????、??????????????,????????。????????!?????-?????【??】: ??????????????????,?????????????,????,?????????,?????????????,?????,?????!?????-?????【??】: ????????????????,???????????????。???????????,??????:????、????、???????！??????-??????【??】: ????????????????????,?????????????????????,?????,????,?????????????-??????【??】: ??????????????????,??:??????,????,????,????,?????,??????????????.????-????【??】: ??????????????、??????、????、?????、?????!????,????????????????!????。?????-?????【??】: ???????????????????,?????????????,???????????.????????????,????????????!?????-?????【??】: ????????????????,???????????????。?????????????,???????,?????????。

  Read the article

• CodePlex Daily Summary for Thursday, June 12, 2014

  CodePlex Daily Summary for Thursday, June 12, 2014Popular ReleasesLuna ORM - Data Layer Code Generator for Vb.Net and C#: Luna 4.14.6.7: Newer version, better LunaEngine with many new feature. Any class implements IDisposable.StackBuilder: StackBuilder 1.0.21.0: *Issue #9 : Take weight of case into account while searching optimal case... *Issue #10 : Changing direction of last layer to use remaining space while stacking a palette... *Issue #11 : New URL for AutoUpdater section in app.config... First working version of INTEX Corp Plugin...QuickMon: Version 3.15: This release expand on 'Presets' - now called Templates. A complete Template editor has been added so you can manage templates(edit, save, import and export). Existing agent configs can be saved as a template for reuse as well. Additionally a few other fixes were done as well. 1. Fixed Registry collector - allow 'blank' key value (<default> values) 2. Default Monitor pack history size is now 100 3. qmp file extension is now the defaultCommand Line Media Controller: v1.0.0.0: Initial ReleaseVidCoder: 1.5.23 Beta: Added first translations for 1.5. Includes new languages Portuguese, Japanese, Chinese Simplified and Czech. Many of these translations are still incomplete: you can help out on Crowdin. Added an option to pass through an input track if it matches the output codec. Updated HandBrake core to SVN 6209. Fixed crash on AAC passthrough. Fixed x264 settings getting set incorrectly when reverting from a preset with the Advanced tab. Fixed occasional crash when calculating remaining time. ...PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.4: Added New-Folder and Remove-Folder functions (Thanks to SueH) Added NoWait parameter to Execute-Process Added the ability for Deploy-Application.exe to point to a different .ps1 file by specifying it on the command-line Added checks to Deploy-Application.exe to verify the AppDeployToolkit folder exists Added PSAppDeployToolkit icon to Deploy-Application.exe Fixed issue where hang could occur if file version was null when using Get-FileVersion Improved exception handling and loggin...CS-Script Source: Release v3.8.1: Improved ConfigConsole AdvancedShell extensions support cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationProligence Orchard PowerShell: OrchardPs 0.2: Version 0.2, build 5273 Major Features: Support for Orchard 1.7 and 1.8 Support for managing Orchard themes Added new cmdlets: Get-OrchardFeature, Get-Tenant, Enable-Tenant, Disable-Tenant, Get-OrchardTheme, Enable-OrchardTheme Minor Features: Added 'gopc' alias for Get-OrchardPsCommand cmdlet Hidden 'Configuration' node in Orchard VFS, as it is not yet implemented Bug Fixes: Fixed signatures for *.ps1xml files 'FromAllTenants' switch no longer fails on tenants which are not running ...BugNET Issue Tracker: BugNET 1.6: Version 1.6 is a major upgrade to the latest frameworks and components by Microsoft. It includes a major UI overhaul using the bootstrap framework to have a modern, mobile friendly and easily customized layout. Upgrade to .NET 4.5 ASP.NET social auth Add script bundling and optimization Improvements for mobile devices Bootstrap (UI overhaul) Rewritten / friendly URL's Please read our release notes for BugNET 1.6: http://blog.bugnetproject.com/2014/06/08/bugnet-1-6-and-bugnet-pro-1...CppWindowsAPI: Library Build 20140608 [3.0]: There are many changes since the older versions before v3.0. Portable to the VS2013. Note that there is something still needed to implement so the relative components have been removed from this release, which will be re-implemented into the future releases. md5: 49bf91dbe4e47dee24d1f62a0b482334 sha-1: 4eabffc1b00557cdf8e83df18ac247e230f4c1d0 md5: 4a63a4923c23bcd821e7411453779086 sha-1: 1bb8549b92c8d791346cfe7efcdaeaa37098591d md5: 371026dfcac75e33f331430cf2c65415 sha-1: 7b8a155f30206f...SFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun EinstellbarLoad Runner - Distributed HTTP Pressure Test Tool: Load Runner 1.2: 1. added support for distributed load test (read documentation for details) 2. added detail documentationbabelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;MyBB: MyBB 1.6.13 Türkçe Kurulum Paketi: MyBB 1.6.13 - Resmi Tam Türkçe UTF-8 Sifir Kurulum Paketi Rar Pass - Sifresi: mybb.com.tr Yayinci site: http://www.mybb.com.tr Orjinal indirme adresi: http://download.mybb.com.tr Destek 1: http://destek.mybb.com.tr/showthread.php?tid=12326 Destek 2: http://tr.mybbdepo.com/mybb-1-6-13-turkce-sifir-kurulum-paketi-konusu.html Dosya: MyBB1613KurulumPaketiTR.rar MD5: d2745b79aa8cc5f8cc09e8a91b50d3cc SHA-1: 6fbb8e611e6d78f8cd3d88d7a773edc67ecc2a3e Ekleyen: XpSerkan MCTR TEAM - Gururla Sunar.SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.Fantom - Expression Based Dynamic Language Manager: Fantom Binary and Test Web Site: The first version of FantomDLL. Download binary and sample site for testing.Back Up Your SharePoint: SPSBackUP 0.1: Supports SharePoint 2010 and 2013 All settings with xml input file Clean backup history Notifications by mail Log script results in rtf fileNPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...Media Player (Technology Area): Media Player 0.3 (Codname Kalo): Themes are included, along with a picture viewer. This does not require 0.2 to be installedNew ProjectsAddress Auto lookup For MS CRM 2013: Address Lookup to find correct addresses in less time.Aspose for Spring.Java: Aspose for Spring Java provides source code and detailed usage instructions for extending the existing Spring.Java samples.Beatting Mole XNA Game on Windows Phone: The project game using XNA Game Engine in Windows PhoneBrecham.Obex: The library provides very broad OBEX support, providing not just the ‘Put’ operation , but also: Connect, Put, Get, SetPath, Delete, and Abort.Command Line Media Controller: This application provides a command line interface for issuing basic media controls to most media player applications.DevExpress Prism Adapters: DevExpress Prism Adapters is a project intented to provide different adapters for DevExpress controls integration with Microsoft Prism.FVSB: fvsbH Logger (8 logger): Create logs with a html format with a Visual Studio 2013 style.Masked Input For CRM 2013: Mask Input for more user friendliness and to avoid user typo errors.MovieDatabase: A movie database manipulation program that uses the movie database api.OpenNetworkTester: GUI-based bandwidth testing toolProgress Tracker: A simple pet project that allows users to set up daily tasks and track which ones they complete.ProjectShipping: summarySerXio: tfs, read tfs dataValu Akunting: Sistem Informasi Akuntansi Valudata KomputindoWindows Phone 8.1 Training for MIC15: Using for store training source code and resource url/files/.??????-??????【??】: ????????????????????,??????????,????????、????,??????????,??????????。??????-??????【??】: ??????????????????????????????,??????????,????,????,???,??????。??????-??????【??】: ????????????????,?????????????? ??。????????、????、????、?????????? ???????。????-????【??】: ??????,??????:?????,?????,??????,??????????,????????。????????!????-????【??】: ?????????????????????:????、????、??????????????,????????。????????!??????-??????【??】: ???????????,?????,???????????,???????,????,????,????,?????。??????-??????【??】: ????????????、???、??、??????????????????????????????,????????????????!????-????【??】: ???????????????????????????、????、????、???????????,????,????!?????-?????【??】: ???????????????8?，????????,????????,??????????,?????,????? ,????????!?????-?????【??】: ???????????????6?,???????????????????????????,??????????????,?????????！????-????【??】: ????????????????????????????,???????????????????????,???????。??????-??????【??】: ????????????????、??????、??????、??????、??????、?????、??????、????、????、????????！?????-?????【??】: ???????????????,????????,????:???????,??????,????,????,?????,?????,??????!?????-?????【??】: ????????????????,?????????????。?????????,???????,???????,?????????????。??????-??????【??】: ?????????????????,??????????????、???????、???????、???????、?????！??????-??????【??】: ????????????????????,????????????????,????????????????,??????！????-????【??】: ???????????????,?????????????。????????????,???????,???????,?????,?????。?????-?????【??】: ?????????????????????????,???????????,????????,?????????????????????。?????-?????【??】: ?????????????????????,????“???????,???????”?????,????????????！??????-??????【??】: ??????????????????????????,????,????,??????????。???????????????,??,??,??????????,??????...??????-??????【??】: ???????????????????,?????????????,????,?????????,?????????????,?????,?????!????-????【??】: ??????????????,?????????????? ??。????????、????、????、?????????? ???????。?????-?????【??】: ????????????????,???????????????。???????????,??????:????、????、???????！?????-?????【??】: ?????????????????,???????????,??????????????,??????????，??????????????！??????-??????【??】: ????????????,????,??????????? ???? ???? ?????????,???,??,?????!??????-??????【??】: ????????????????、????、????、??????、????、????????,????????、?????????,?????。????-????【??】: ????????????????:?????? ???? ??????,???????,??????,???????。?????-?????【??】: ????????????????,?????????????。????????????,???????,???????,?????,?????。?????-?????【??】: ?????????????????????????,???????????,????????,???????????????????????????-??????【??】: ???????????????????,?????????????,????,?????????,?????????????,?????,?????!??????-??????【??】: ?????????????????,???????????????。???????????,??????:????、????、???????！????-????【??】: ????????????????????????,????,????,??????????。???????????????,??,??,??????????,??????...?????-?????【??】: ?????????????????,???????????,??????????????,??????????，???????????????????-?????【??】: ?????????????????、?????、?????、????、?????,??????????。????????????????!??????-??????【??】: ????????????????????,????????????????,????????????????,??????！??????-??????【??】: ??????????????????????,????“???????,???????”?????,????????????！????-????【??】: ???????????????,??????????????、???????、???????、???????、?????！?????-?????【??】: ???????????????,????,????,??????,????“????、????、????、????”????????,??????.?????-?????【??】: ???????????????????,????????:??、??、???,?????????????????????!??????-??????【??】: ????????,??????:?????,?????,??????,??????????,????????。????????!??????-??????【??】: ???????????????????????:????、????、??????????????,????????。????????!??????-??????【??】: ?????????????????????????????,??????????,????,????,???,??????????-????【??】: ????????????????、????,??100%????,??????,????????????,???????????!????-????【??】: ??????????????????,??????????,????????、????,??????????,??????????。??????-??????【??】: ??????????????,????????,?????,???,???????????,???????????,?????,??????！??????-??????【??】: ??????????????????????????????????:???????,??????,????,????,????,?????！????-????【??】: ???????????????????，?????????/?,,???????????,??????????????!?????-?????【??】: ???????????????????????,????,????,????,???????,?????,?????.??????。?????-?????【??】: ???????????????、?????,????????????????????,????,????,??????。??????-??????【??】: ????????????????????,???????????????????????????,????:????,????,????,?????。?????-?????【??】: ???????????????????、????????、????????、????????、???????,????????????。?????-?????【??】: ????????????????,???????,??????。??????????,????,????,?????,????????????。???????-???????【??】: ??????????????????,??????,????,?????????????,????????,??????,????,?????...???????-???????【??】: ?????????????? , ???? ?????,??????????????,????,????,??????。?????-?????【??】: ???????????????????,??????????????,???????????,??????,????,??????,??????。??????-??????【??】: ????????????????,??????????????????????:???????,??????,????,????,????,????,????,???????！??????-??????【??】: ??????????????!???????????,??????,????,?????????????,????????,??????,????,?????...??????-??????【??】: ??????????????????、?????、?????、????、?????,??????????。????????????????!??????-??????【??】: ??????????????????????,????????,??????????,?????,????? ,????????!??????-??????【??】: ?????????????????,??????????、??????,??????????、????、????、???????。????-????【??】: ???????????、??????????????????,????????,?????,??????,????,????,????!?????-?????【??】: ?????????????????????,???????????????,???????,?????,?????,????? !!!?????-?????【??】: ?????????????????????,???????????????,????????????????????!???????-???????【??】: ????????????????????,??????????????????,?????????????。?????????,????????????。??????-??????【??】: ??????????????????,????,????,?????????.?????,?????!?????,?????????、??、??!??????-??????【??】: ???????????????????,?????????????,?????????????,??????,????,????,??????????！??????-??????【??】: ?????????????????,??????????、??????,??????????、????、????、???????。??????-??????【??】: ??????????????????????,???????????????,???????,?????,?????,????? !!!????-????【??】: ????????????????????,????????,??????????,?????,????? ,????????!?????-?????【??】: ?????????????????????,???????????????,????????????????????!?????-?????【??】: ?????????????????、????,??100%????,??????,????????????,???????????!??????-??????【??】: ??????????????????????????????,???????????????????????,???????。??????-??????【??】: ??????????????????:?????? ???? ??????,???????,??????,???????。????-????【??】: ????????????????、????、??????、????????,????????????,???????????！?????-?????【??】: ???????????,????,??????????? ???? ???? ?????????,???,??,?????!?????-?????【??】: ???????????????、????、????、??????、????、????????,????????、?????????,?????。??????-??????【??】: ?????????????:??????、????、????、????、????、??????、??????，???????!??????-??????【??】: ??????????????????,????,??.??.??.??.??.??.??.???，????，???????!????-????【??】: ??????????????，???????、???????????，????????、????、????、??????、????????。?????-?????【??】: ????????????????????????????，???????????????，????????、????、????、????、?????????，???????、???、???，??????????????????????，????????????、???????、??????????；???????????????-?????【??】: ???????????【.????.????.????.????.】??【??】:、??、??、??、??、??、??、??、??、??、??、???????????-??????【??】: ??????????????????、?????、?????、?????、?????、????,???????????,?????,??????！??????-??????【??】: ??????????????????,???、???!???????,????????????????,????????????,???!????-????【??】: ?????????????????????,????????????,?????、??、????,?????,???????????-?????【??】: ????????????????、????、????、??????????,???,?????,???????????????.?????-?????【??】: ????????????????????,?????????、??、??、????,??????????,?????????????！

  Read the article

• June 26th Links: ASP.NET, ASP.NET MVC, .NET and NuGet

  - by ScottGu

  Here is the latest in my link-listing series.  Also check out my Best of 2010 Summary for links to 100+ other posts I’ve done in the last year. [I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET Introducing new ASP.NET Universal Providers: Great post from Scott Hanselman on the new System.Web.Providers we are working on.  This release delivers new ASP.NET Membership, Role Management, Session, Profile providers that work with SQL Server, SQL CE and SQL Azure. CSS Sprites and the ASP.NET Sprite and Image Optimization Library: Great post from Scott Mitchell that talks about a free library for ASP.NET that you can use to optimize your CSS and images to reduce HTTP requests and speed up your site. Better HTML5 Support for the VS 2010 Editor: Another great post from Scott Hanselman on an update several people on my team did that enables richer HTML5 editing support within Visual Studio 2010. Install the Ajax Control Toolkit from NuGet: Nice post by Stephen Walther on how you can now use NuGet to install the Ajax Control Toolkit within your applications.  This makes it much easier to reference and use. May 2011 Release of the Ajax Control Toolkit: Another great post from Stephen Walther that talks about the May release of the Ajax Control Toolkit. It includes a bunch of nice enhancements and fixes. SassAndCoffee 0.9 Released: Paul Betts blogs about the latest release of his SassAndCoffee extension (available via NuGet). It enables you to easily use Sass and Coffeescript within your ASP.NET applications (both MVC and Webforms). ASP.NET MVC ASP.NET MVC Mini-Profiler: The folks at StackOverflow.com (a great site built with ASP.NET MVC) have released a nice (free) profiler they’ve built that enables you to easily profile your ASP.NET MVC 3 sites and tune them for performance.  Globalization, Internationalization and Localization in ASP.NET MVC 3: Great post from Scott Hanselman on how to enable internationalization, globalization and localization support within your ASP.NET MVC 3 and jQuery solutions. Precompile your MVC Razor Views: Great post from David Ebbo that discusses a new Razor Generator tool that enables you to pre-compile your razor view templates as assemblies – which enables a bunch of cool scenarios. Unit Testing Razor Views: Nice post from David Ebbo that shows how to use his new Razor Generator to enable unit testing of razor view templates with ASP.NET MVC. Bin Deploying ASP.NET MVC 3: Nice post by Phil Haack that covers a cool feature added to VS 2010 SP1 that makes it really easy to \bin deploy ASP.NET MVC and Razor within your application. This enables you to easily deploy the app to servers that don’t have ASP.NET MVC 3 installed. .NET Table Splitting with EF 4.1 Code First: Great post from Morteza Manavi that discusses how to split up a single database table across multiple EF entity classes.  This shows off some of the power behind EF 4.1 and is very useful when working with legacy database schemas. Choosing the Right Collection Class: Nice post from James Michael Hare that talks about the different collection class options available within .NET.  A nice overview for people who haven’t looked at all of the support now built into the framework. Little Wonders: Empty(), DefaultIfEmpty() and Count() helper methods: Another in James Michael Hare’s excellent series on .NET/C# “Little Wonders”.  This post covers some of the great helper methods now built-into .NET that make coding even easier. NuGet NuGet 1.4 Released: Learn all about the latest release of NuGet – which includes a bunch of cool new capabilities.  It takes only seconds to update to it – go for it! NuGet in Depth: Nice presentation from Scott Hanselman all about NuGet and some of the investments we are making to enable a better open source ecosystem within .NET. NuGet for the Enterprise – NuGet in a Continuous Integration Automated Build System: Great post from Scott Hanselman on how to integrate NuGet within enterprise build environments and enable it with CI solutions. Hope this helps, Scott

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >