Search Results

Search found 20264 results on 811 pages for 'home networking'.

Page 44/811 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

  • Home server hard drive: 186k start-stop cycles in 325 days?

    - by j-g-faustus
    I set up a home server about a year ago, using Ubuntu server (10.04 LTS at the moment), four disks in RAID 5 for storage (WD Green 1.5 TB) and a laptop drive for the OS. Today the output of smartctl, a command line utility for checking the SMART attributes of a hard drive, tells me that the primary OS drive has had no less than 186,000 start-stop cycles in 325 days and may be nearing the end of its lifespan. The smartctl output is in "normalized values", in this case a number between 200 and 000, where 200 is "brand new" and 000 means "worn out". My disk gets 001. So I wonder what happened: 186k start/stop cycles in 7820 hours is about one start/stop per 2.5 minutes around the clock. This seems somewhat excessive for a computer that sees actual use once or twice per day. (The RAID disks are normal, averaging to one start/stop per day, as expected.) Does anyone have similar experiences, or pointers to what might be the issue here? Specifically I'd like to know Why the massive start/stop count? Do I have some sort of configuration issue? Could there be a background service that is causing trouble? Could having a laptop disk as the OS drive be part of the problem? Can anyone confirm or deny this? Here is the /etc/hdparm.conf configuration /dev/sda { apm = 127 spindown_time = 120 } and the most relevant parts of smartctl --attributes /dev/sda: smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 001 001 000 Old_age Always - 185875 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7820 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 109 193 Load_Cycle_Count 0x0032 118 118 000 Old_age Always - 246833 194 Temperature_Celsius 0x0022 107 098 000 Old_age Always - 36 As I generally prefer my drives to last more than a year, any advice is appreciated.

    Read the article

  • Slow Wireless Reconnect After Suspend - Broadcom 4312 with STA drivers

    - by nrhine1
    I am using 10.10 with STA drivers, I reinstalled ubuntu because the b43 drivers were giving me a huge hassle along with some weird kernel issues. My wireless speed is fine, everything works well, except upon restart of computer and after taking the computer out of suspend. It takes about 30-45 seconds for the wireless to reconnect, and I think it is a driver issue (I clicked on the network manager at the top and for about 30 seconds there are no wireless networks listed.) I tried this advice already: http://lilserenity.wordpress.com/2007/10/31/fix-ubuntu-dropping-wireless-on-suspendhibernate-resume/ which basically says to change this: STOP_SERVICES="" to STOP_SERVICES="networking" in the file /etc/default/acpi-support This did not help anything. Something to note is that the issue does not occur when I am logging back in after already logging in once and logging out.

    Read the article

  • Ubuntu and VirtualBox

    - by Sinan
    I have the following configuration, A host running Windows 7; A guest running Ubuntu 14.04 LTS (VirtualBox); I am connecting a Cisco router directly to my PC running Windows 7 and testing the router for netflow packets in the virtualBox I am having a difficulty capturing the traffic of the netflow from the Cisco device in my virtualBox using port 2222. I tried to use the many different networking modes provided by virutalBox (i.e. NAT, Bridged Adapter, Host only adapter) but I am not successful in capturing the netflow traffic. Could you please advise me on the configuration setup that need to be done on the virtual box to allow capturing the traffic coming from the router. I successfully capture the netflow traffic on my PC (windows 7). Thank you

    Read the article

  • Can not resolve hostnames on Xubuntu computers

    - by P Curtis
    I have a network of computers which has been running for many years. I have changed two of those to Xubuntu 11.10 and found I can no longer connect by ssh using the host-name from any other machine. I can connect and ping by IP although ping is very slow in one case (~200ms). All other machines are fine including another with Ubuntu 11.10. Host-name resolution works from Xubuntu machines to other networked machines. I am using wins resolution and have checked settings in /etc/nsswitch.conf are the same as my working Ubuntu systems. What is different in Xubuntu networking that I might have missed?

    Read the article

  • How to forward an Internet connection to another network?

    - by Naveen
    Can somebody please make a shot & sweet tutorial telling how to forward an Internet connection to different network interfaces in Ubuntu...? This is the idea: I'm using a 3G usb modem to get Internet on my laptop ,which is: ppp0 IP=10.225.174.70 My Wifi device is: wlan0 MAC=78:e4:00:d4:3d:85 These devices are determined from ifconfig command. I want to share ppp0's internet connection with wlan0 device, so I can connect any other device to wlan0 and browse internet from that device. Making a Hotspot using Network settings GUI doesn't do the trick because the other device won't receive Internet, it just connects to wlan0. I heard iptables can do this, but I'm totally confused by the alien commands seen online. I'm no expert in networking. Please compose a clear & simple answer using the above devices. This is a huge annoying problem for iPhone & tablet users came to Ubuntu from Windows.

    Read the article

  • Hybrid wireless network repeating

    - by Oli
    Summary: I'd like to use two Ubuntu computers to extend/compliment an existing wireless access point. I have a network which currently looks a bit like this: What the diagram doesn't show is the interference caused by our house. It's a wifi-blocking robot sent here from the past. The two wired computers are in areas where the signal is most blocked (not by design, just a happy co-incidence). Both wired computers have fairly good network cards. They're both Ubuntu machines and I would like to turn them into additional base stations. I know I could throw more networking hardware at this (network extenders or cable in additional, pure wireless access points) but I've got two Linux machines sitting in ideal places and I feel like they should be able to help me out. I've tried ad-hoc networks but I need something that is a lot more transparent (eg you can migrate from base to base without a connection dropping); it should look like one network to clients.

    Read the article

  • Compact DIY Office-in-a-Cart Packs Away Into a Closet

    - by Jason Fitzpatrick
    Many geeks know the pain of losing a home office when a new baby comes along, but not many of them go to such lengths to miniaturize their offices like this. With a little ingenuity an entire home office now fits inside a heavily modified IKEA work table. Ian, an IKEAHacker reader and Los Angeles area geek, explains the motivation for the build: I had to surrender my home office to make room for my new baby boy ;) I took an Ikea stainless steel kitchen “work table”, some Ikea computer tower desk trays, two steel tabletops, and two grated steel shelves to make an “office” that I could pack away into a closet. Hit up the link below to check out the full photo set, the build includes quite a few clever design choices like mounted monitors, a ventilation system, and more. Home Office In A Box [IKEAHacker] HTG Explains: How Antivirus Software Works HTG Explains: Why Deleted Files Can Be Recovered and How You Can Prevent It HTG Explains: What Are the Sys Rq, Scroll Lock, and Pause/Break Keys on My Keyboard?

    Read the article

  • Ubuntu 12.04 connected to wireless network but internet not working

    - by A.J.
    I can connect to my house's wireless network just fine, but when I'm connected I can't browse the web. Firefox starts connecting to a site and then just poops out. This doesn't happen on my roommates' computers (running Windows) or on our 3DSes, so I know it's just my laptop. I already tried sudo dhclient -r sudo dhclient sudo ifconfig eth0 down sudo ifconfig eth0 up Results of a few commands I was asked to run in comments: ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. ^C --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (173.194.33.38) 56(84) bytes of data. --- google.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1006ms nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 88:AE:1D:6B:4E:E7 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off - Device: wlan0 [JUSTICE] ----------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: connected Default: yes HW Address: 1C:65:9D:65:C6:31 Capabilities: Speed: 1 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) HOME-9B18: Infra, 00:26:F3:53:9B:18, Freq 2412 MHz, Rate 54 Mb/s, Strength 34 WPA WPA2 cougdad48 Network: Infra, 60:33:4B:E4:C4:5D, Freq 2437 MHz, Rate 54 Mb/s, Strength 22 WPA2 cougdad48 Guest Network: Infra, 66:33:4B:E4:C4:5D, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 WPA2 belkin.ade: Infra, 94:44:52:FF:8A:DE, Freq 2457 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 *JUSTICE: Infra, 00:24:01:7B:9F:7E, Freq 2462 MHz, Rate 54 Mb/s, Strength 88 WEP CenturyLink: Infra, B2:B2:DC:8E:E2:58, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA WPA2 IPv4 Settings: Address: 192.168.0.11 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 (JUSTICE is my home's network.) ping -c 2 198.168.0.1 PING 198.168.0.1 (198.168.0.1) 56(84) bytes of data. --- 198.168.0.1 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms

    Read the article

  • Connecting to an Amazon AWS database [closed]

    - by Adel
    so I'm a bit overwhelmed/bewildered by the whole concept of networking/remote-desktop , etc. The context is that - in my company I need to access a remote database. The standard way I use is to first connect using a VPN-Client( called Shrew Soft Access manager), then once that says: "network device configured tunnel enabled" I'm good to connect using windows "Remote Desktop Connection" . But now our company set up an Amazon AWS database, and I'm told I need to connect, and I ony need to use RDP. So I tried the standard windows one - but it doesn't work. On wikipedia , I looked up remote desktop sftware and downloaded one called VNC Viewer. but it doesn't work. Any advice/tips/comments appreciated EDIT: YAYA! I finally got a little more connected . I had to use my username as a fully qualified name: Computer: XYZ.XYZ.XYZ.XYZ USERNAME: XYZ.XYZ.XYZ.XYZ\aazzam

    Read the article

  • Changed isp, Ubuntu 13.04 won't connect to the internet

    - by Lori
    I recently moved and changed internet service providers. my ubuntu 13.04 machine is unable to connect to the internet. I need help with the networking settings. The previous isp was Verizon dsl, current a cable company. Both connect via ethernet cable. The cable and router work on a windows machine, but not my ubuntu machine. The cable company doesn't support ubuntu or any linux operating systems. The computer seems to recognize the connection. When I unplug and plug in the cable I get a little window that says disconnected, connected. However, I can't connect to the internet in either Firefox or the Ubuntu software installer (tried this to see if it was a firefox issue, it wasn't). I tried shutting down and restarting, plugging and unplugging cables, etc.

    Read the article

  • Can't connect to or see my wifi ssid

    - by ant
    Today I installed ubuntu 12.04 on my laptop. I am unable to see my home SSID or even connect to it. I've tried to connect as a hidden SSID but I always get prompted for authorization although my key is correct. I'm in in Europe but my laptop is from US. I'm not sure if that is relevant. I've read around this site and saw something that has to do with setting the channel above 11. I'm not sure I did that correctly I did this : How to use Wi-Fi channels above 11? Did't help. I'm able to connect with cable but not via wifi either windows or linux. Other devices in my home can connect without any issues, even the kindle. Here is the screenshot from my router : Here is some additional info : lspci | grep -i network 08:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) lspci -nnk | grep -A2 0280 08:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Hewlett-Packard Company U98Z062.10 802.11bgn Wireless Half-size Mini PCIe Card [103c:303f] Kernel driver in use: ath9k m-tool NetworkManager Tool State: connected (global) Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: disconnected Default: no HW Address: 90:4C:E5:38:79:0D Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes I'm not sure what to do next. Any suggestions?

    Read the article

  • How to access network folders from within windows 7 virtualbox

    - by musher
    At work we have fileshare storages accessible via the network. I'm not super familiar with this kind of networking, so I'm not 100% sure how to word this question/give enough details right away so please ask for any clarifications. That being said: Host: Xubuntu 14.04 Guest: Windows 7 enterprise Via thunar I can access these network drives fine by going to Browse Network > Windows Network > Server I want to use The name given in the address bar is: smb://SERVER-NAME So my question now, is how do I go about accessing these folders via my win 7 machine in virtualbox? I've searched but all I get is people who can't figure out shared folders between host/guest (which I've got working)

    Read the article

  • Ubuntu 12.04 Server ping gateway responds with destination host unreachable

    - by blckblttkd
    I consider myself fairly avid with Ubuntu and Linux, but this one has me stumped. I built up a Xen Server using Ubuntu 12.04 as the base operating system. It has multiple domUs running on it. My home network has a statically defined network where I got all the network connectivity going peachy. The server was moved to a permanent home this morning. So, the network configuration on the main system had to change. Again, another static network, but now I can't ping the upstream gateway from the host. As the VMs use this NIC over a bridge, they too are broken. Ping responds with "destination host unreachable." I simplified the networking down to a simple static network as seen below (no bridge or anything) just to get it to work. Here's the contents of my /etc/network/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 216.7.188.228 gateway 216.7.188.225 netmask 255.255.255.240 broadcast 216.7.188.255 network 216.7.188.0 dns-nameservers 8.8.8.8 8.8.4.4 Here's the contents of route -n 0.0.0.0 216.7.188.225 0.0.0.0 UG 100 0 0 eth0 216.7.188.224 0.0.0.0 255.255.255.240 U 0 0 0 eth0 And the results of pinging the gateway: PING 216.7.188.225 (216.7.188.225) 56(84) bytes of data. From 216.7.188.228 icmp_seq=1 Destination Host Unreachable From 216.7.188.228 icmp_seq=1 Destination Host Unreachable From 216.7.188.228 icmp_seq=1 Destination Host Unreachable Again, this worked in one network flawlessly (obviously with different parameters in the interfaces file). I did try using eth1 (as there are two NICS on the server (in case the MAC address got flipped on bootup). No success there. Yes, the cable is in the right port now :) Any thoughts? I appreciate the help!

    Read the article

  • System network service uncompatable after harddrive change and format

    - by NStephenH
    After changing out the hard drive in my dell optiplex 750, and reinstalling ubuntu, my computer tells me the system network services are not compatable. Because my cd drive does not work, I installed this by placing the hard drive in another computer an dusign the mini.iso to install it. I need networking capabilities becuase I want to use this computer as a web server. The on-board ethernet card is a intel 82566 something. If you need more information, and can tell me how to get it, just ask. Please help.

    Read the article

  • How to make an internet server as firewall using ubuntu 11.10

    - by Sumant
    i have one static broadband connection which is coming to my Ubuntu server with 2 lan cards, there are 10 more PC's to which i need to provide internet connection through Ubuntu server as well as i have to block social networking websites access during office hours. Now i am getting confuse with the way i should follow i should go for sharing internet connection & firewall building or should configure DHCP server,router & firewall. which will be easiest setup and what i should do for that. coz its first time i will be doing.

    Read the article

  • Cisco AnyConnect VPN Client broke my internet

    - by user137864
    I was using the AnyConnect client when it froze and I had to do a hard reboot of my computer. Now I can't connect to the internet at all, with or without VPN. The Network Connections manager seems to think I have a wired and wireless connection without a problem, but I can't go online. I have tried using /etc/init.d/networking restart and it even says it is "ok" with no luck. I am guessing I need to clear some settings somewhere and restart a service, but I am not sure what. Thanks!

    Read the article

  • Network connection fails when downloading data

    - by Guus
    In the past few weeks, I've noticed my network connection becoming unstable while downloading files. I'm not sure how to diagnose this issue. I've found that my network connections appear to be temporarily unresponsive (for periods up to a minute or so) while I'm downloading a file (that's large enough to not be downloaded instantly). The problem occurs when downloading data through a webbrowser, but also when using SCP to download data from a remote location. During the period in which network connections are unresponsive, every resource that I try to access over the network is unavailable. This includes: The download itself (SCP reports a 'stalled' download) Web pages (won't load - browsers report 'resource unavailable') SSH sessions (CLI freezes) VPN connections (connections terminate) IM client connections (client starts reconnection attempts) ... (everything is pretty much dead) I've noticed that during such a period, I cannot even access the (web-based) administrative console of the router on my LAN at home (although it remains reachable for other devices). The problem occurs when connected to my home network, but also when I'm in the office. Other devices than my laptop are not affected. Given the above two characteristics I assume the problem cause lies within my laptop, not the network infrastructure. I'm running Ubuntu 11.10. Apart from applying automatic updates from Ubuntu, I can't think of a change that I applied to the OS that could have started the problems. I'm absolutely positive that this issue did not occur up to a few weeks ago (as it's very noticeable, and only started to annoy me in the last few days). When the problem occurs, applications that make use of a network connection fail visibly (I get popups telling me that a VPN connection is broken, for instance). The network manager does not report any issues related to my wifi-connection though. Help?

    Read the article

  • how to find available wireless networks

    - by Quinn
    I'm using an HP Pavilion dv6000 I've looked at other answers similar to this question how ever when I look at my network symbol it doesn't say anything that the answer below says "Make sure that your wifi hardware switch is on or not. It is either F2 or F12 or near to it. Once the switch is enabled, there is a small fan-like applet on the top panel (Gnome Network Manager), fourth from the right. Click on it and if there is no tick mark on the option 'Enable Wireless', enable it. Wait till your wifi connection name appears." it how says 'Enable Networking' my wi-fi switch is on and I've tried using terminal to kill the applet as another answer suggests trying. Does anyone have any other ideas that might help? Just in case anybodies curious as to how I'm posting this I'm on my other ubuntu laptop that's running an older version.

    Read the article

  • Issue with setting up multiple IP addresses on ubuntu server installation

    - by varunyellina
    I want to setup two ip addresses on my system for access through lan. This is my config on my other system. Desktop Installation My desktop installation runs with multiple IP's added through networkmanager both through lan and wifi. Server Installation On my server install I've edited /etc/network/interfaces to the following. auto eth0 auto eth0:1 # IP-1 iface eth0 inet static address 172.16.35.35 network 172.16.34.1 netmask 255.255.254.0 broadcast 172.166.35.255 dns-nameservers 172.16.100.221 8.8.8.8 # IP-2 iface eth0:1 inet static address 172.16.34.34 network 172.16.34.1 netmask 255.255.254.0 gateway 172.16.34.1 broadcast 172.16.35.255 After restarting through "/etc/init.d/networking restart" I recieve "Failed to bring up eth0:1" What am I doing wrong? Thankyou.

    Read the article

  • ssh many users to one home

    - by filippo
    Hiya, I want to allow some trusted users to scp files into my server (to an specific user), but I do not want to give these users a home, neither ssh login. I'm having problems to understand the correct settings of users/groups I have to create to allow this to happen. I will put an example; Having: MyUser@MyServer MyUser belongs to the group MyGroup MyUser's home will be lets say, /home/MyUser SFTPGuy1@OtherBox1 SFTPGuy2@OtherBox2 They give me their id_dsa.pub's and I add it to my authorized_keys I reckon then, I'd do in my server something like useradd -d /home/MyUser -s /bin/false SFTPGuy1 (and the same for the other..) And for the last, useradd -G MyGroup SFTPGuy1 (then again, for the other guy) I'd expect then, the SFTPGuys to be able to sftp -o IdentityFile=id_dsa MyServer and to be taken to MyUser's home... Well, this is not the case... SFTP just keeps asking me for a password. Could someone point out what am I missing? Thanks a mil, f. [EDIT: Messa in StackOverflow asked me if authorized_keys file was readable to the other users (members of MyGroup). Its an interesting point, this was my answer: Well, it wasn't (it was 700), but then I changed the permissions of the .ssh dir and the auth file to 750 though still no effect. Guess it's worth mentioning that my home dir ( /home/MyUser) is also readable for the group; most dirs being 750 and the specific folder where they'd drop files is 770. Nevertheless, about the auth file, I reckon the authentication would be performed by the local user on MyServer, isn't it? if so, I don't understand the need for other users to read it... well.. just wondering. ]

    Read the article

  • Can I use a desktop as a network server?

    - by Jhourlad Estrella
    Pardon me if I'm asking the wrong question. But I am a newbie in networking and I'm not sure what direction to go on this. I have just setup an Ubuntu Desktop. I am planning to convert it to a network server without losing the GUI interface (again, I'm a newbie) and use it to manage and monitor user access to a network with a small number of network terminals all running on Windows. My purpose is to use the new server to filter sites accessed by each terminals, monitor sites being visited by employees and grant access to both group and user-specific folders based on their IP address. Is this possible? What server software do I need to install? How do I structure the hardware? (I have a router, a hub, the Ubuntu server and the network terminals) How do I assign privileges to users and monitor them at the same time? Thank you in advance for your replies.

    Read the article

  • How to access dev server in Ubuntu VirtualBox guest on Windows 7 host?

    - by Curyous
    I'm running a Google App Engine dev server on Ubuntu 11.10 Desktop in a VirtualBox VM, on a Windows 7 host. According to this question I have the following setup: The VM networking is set to use Host-only network adapter. Internet connection sharing (ICS) is enabled in Windows. For ICS, the Windows VirtualBox network port and the Ubuntu wired connection have fixed IPs. The Ubuntu VM can access the internet. I can ping the guest from the host. On the host, if I put the guest IP address in Chrome's address bar, it says it can not connect. What do I need to do from here to access the GAE dev server that is running on Localhost:8080?

    Read the article

  • Unity on Ubuntu 11.10 - The Dash Home button brings up the panel, but is empty

    - by David M. Coe
    The dash home button brings up a panel that is greyed out, but it is totally empty. It seems to be the very same issue as this: Dash home button brings up blank window which is unanswered. /usr/lib/nux/unity_support_test -p returns OpenGL vendor string: X.Org R300 Project OpenGL renderer string: Gallium 0.4 on ATI RV370 OpenGL version string: 2.1 Mesa 7.11 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes I've tried a unity --reset but that doesn't seem to work. Unity seems to reset, but I get the following warning over and over: cs space validation failed unity What should I do next to try and fix this? Edit: Attempted fixes: I've refomatted, did not work. I've done apt-get remove unity then apt-get update then apt-get install unity, did not work. I've switched to Unity 2d and this seems to work. How can I get regualar Unity working or atleast find the error?

    Read the article

  • Slow Wireless Reconnect After Suspend

    - by nrhine1
    I a Broadcom 4312 using the STA drivers, I reinstalled ubuntu because the b43 drivers were giving me a huge hassle along with some weird kernel issues. My wireless speed is fine, everything works well, except upon restart of computer and after taking the computer out of suspend. It takes about 30-45 seconds for the wireless to reconnect, and I think it is a driver issue (I clicked on the network manager at the top and for about 30 seconds there are no wireless networks listed.) I tried this advice already: http://lilserenity.wordpress.com/2007/10/31/fix-ubuntu-dropping-wireless-on-suspendhibernate-resume/ which basically says to change this: STOP_SERVICES="" to STOP_SERVICES="networking" in the file /etc/default/acpi-support This did not help anything. Something to note is that the issue does not occur when I am logging back in after already logging in once and logging out.

    Read the article

  • 2D Physics in a networked game (iOS)?

    - by Pedro
    I am researching the possibilities for a new iOS game. It's going to be a run-n-gun type platformer, and I'm looking into the possibility of co-op multiplayer. The game itself wouldn't be very physics intensive, there will most likely be 20-30 physics bodies at any given time. For the multiplayer, I think I would have one player "hosting" and up to 3 other connecting via the Internet. Here's my first question, are there any 2D physics engines that work over a network(preferably open source)? My second question, Does anyone have any thoughts on using a non-networked engine (like Box2D or Chipmunk) and adding the networking component? Since there would not be very much information sent, do you think it would cause a lot of lag?

    Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >