Search Results

Search found 5528 results on 222 pages for 'offsite storage'.

Page 44/222 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

  • Can I use plain RAID on a Drobo?

    - by cringe
    I'm thinking about a RAID device and the Drobo is on top of my list (followed by the WD ShareSpace). But I don't want to be in another walled garden with Drobos BeyondRAID technology. Can I use the Drobo with a plain RAID setup? So I can take my HDDs and connect it to another RAID controller and go on?

    Read the article

  • Sharing information between nodes in Beowulf Cluster

    - by Alejandro Sazo
    I am setting up a beowulf cluster and I've been reading that it might be necessary to make the home directory of the cluster users shared between them (assuming this users are local to each machine). The other case is leave each user with its own home and the communication is up to the master node. Another idea that came up was to use an LDAP unique user logged on each machine in the cluster, that keeps the idea of the shared home between nodes (but is only one home of one user). Which approach is better for this kind of cluster? Edit: The cluster is running openmpi and it will support cuda and opencl

    Read the article

  • Does a 3ware "ECC-ERROR" matter on a JBOD when I have ZFS?

    - by Stefan Lasiewski
    I have a FreeBSD 8.x machine running ZFS and with a 3ware 9690SA controller. The 3ware controller shows an ECC-ERROR with one of the disks: //host> /c0 show VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 279.39 GB SAS 0 - SEAGATE ST3300657SS p1 OK u0 279.39 GB SAS 1 - SEAGATE ST3300657SS p2 OK u1 931.51 GB SAS 2 - SEAGATE ST31000640SS p3 ECC-ERROR u2 931.51 GB SAS 3 - SEAGATE ST31000640SS p4 OK u3 931.51 GB SAS 4 - SEAGATE ST31000640SS /c0 show events shows no ECC errors in it's recent history. ZFS does not currently detect any errors. zpool status says No known data errors My question: Is this ECC-ERROR something that I need to be concerned about? According to the 3ware CLI 9.5.2 Manual, an ECC-ERROR means that the 3ware controller caught a read-error for one or more sectors on this drive. This sometimes occurs when a RAID array is recovering from a failed disk. I believe that ECC-ERRORS can also be detected when the 3ware Controller verifies each disk. None of the drives have failed and thus there was no drive rebuild, so I assume that 3ware discovered a bad sector when it ran it's weekly auto-verify scan of the disks. Is this a safe assumption? According to our logs, ZFS has not detected any bad sectors on this drive. ZFS can work around read errors -- if ZFS detects a bad sector on the drive, it will simply mark that sector as bad and never use it again. From the ZFS perspective one bad sector isn't a big deal, although it might indicate that the drive is starting to go bad.

    Read the article

  • Disabling RAID feature on HP Smart Array P400

    - by Arie K
    I'm planning to use ZFS on my system (HP ML370 G5, Smart Array P400, 8 SAS disk). I want ZFS to manage all disks individually, so it can utilize better scheduling (i.e. I want to use software RAID feature in ZFS). The problem is, I can't find a way to disable RAID feature on the RAID controller. Right now, the controller aggregates all of the disks into one big RAID-5 volume. So ZFS can't see individual disk. Is there any way to acomplish this setup?

    Read the article

  • Incremental backups from Rackspace Cloud Files to Amazon Glacier

    - by Martin Wilson
    Is there a software product/module (open-source or commercial) that can provide incremental backups from Rackspace Cloud Files to Amazon Glacier? We are looking for something that will provide the following functionality (or achieve the same result, i.e. a cost-effective backup strategy for files stored in Rackspace Cloud Files): Work out which files have been added to or modified in a Rackspace Cloud account (since the last backup). Create a ZIP (or similar) of these files and store them in Amazon Glacier. Keep a record of which files are in which ZIPs. Ideally, restore either a single file or all files from Glacier back into Rackspace.

    Read the article

  • My uncle is the family historian. We need to host about 5-15 TB of images and video. Any inexpensive

    - by Citizen
    Basically we have hq scans of thousands of old family photos. Plus tons of family video. We want to host them where we can still have total control over the content and restrict access. I'm a php programmer, so the security is not an issue. What is an issue is finding a host to store 10 TB of data and not be paying a ton of money. We really are not planning on a lot of traffic. Maybe 1-10 visitors a day; family only. Kind of like an online library.

    Read the article

  • IOmeter Hanging

    - by Xiuhtecuhtli
    am attempting to setup a test bed with 2 server using IOmeter.exe I have IoMeter & Dynamo running on My Manger server @ 10.0.0.3 i have another machine running only Dynamo @ 10.0.0.4 so. on 10.0.0.4 i run "Dyanmo.exe /i 10.0.0.4 /m 10.0.0.3" at this point the Iometer.exe on 10.0.0.3 Hangs and stops responding. Any Thoughts?

    Read the article

  • MediaShield RAID 5 is showing up as 760GB when the actual size is 2.7TB

    - by Ilya Volodin
    I just finished setting up Windows 2003 Server on my new server. And I started setting up a RAID 5 for it. I have 4x1TB Hard Drives. From MediaSheild RAID Utility (at boot time) the RAID size is displayed as 2.7TB. Linux also shows it as 2.7TB. However, in Windows, everything (including Windows Disk Management as well as Windows based MediaShield utility) is reporting only 760Gb. I already tried converting partitioning table to GUID from MBR, because I read somewhere that Windows can only handle up to 2TB MBR tables, that didn't help much. Tried searching for partitioning utilities that I could use, but couldn't find anything free. Formatted the disk as NTFS partition from within Linux, it stop showing in Windows all together, even MediaShield windows utility isn't showing at anymore. Windows is installed on a separate 500Gb hard drive, that's setup not to support RAID. Any ideas?

    Read the article

  • Is RAID 5 or SnapRAID the better alternative for a media server raid system?

    - by rubo77
    I am using a raid 5 system for my ubuntu 12.04 xmbc media server with 5 disks. Since the data isn't changing a lot and a total loss wouldn't be so bad, cause I have another backup anyway I am thinking about using SnapRAID It sais: SnapRAID is mainly targeted for a home media center, where you have a lot of big files that rarely change The main advantage for me would be power-saving, cause not all disks have to run all the time. Would you recomment using this? (with a regular resync script once a day)

    Read the article

  • Database Performance Across 3 NetApp FAS2050

    - by bjd145
    I recently inherited a SQL Server 2005 box that has LUNs mounted on it from three different NetApp FAS2050 filers. The reason there are three is because the first two filers are out of space and our databases continually need more of it. What kind of performance impact (if any) does this setup have? Is it better to move the LUNs from the two other older filers to the newer one so that we have only one filer/controller for caching, etc ? This is in general. I apologize for not having more specifics.

    Read the article

  • Failures when copying between two external drives on the same controller

    - by Krzysztof Kosinski
    I'm encountering a weird problem which is present both on Ubuntu 9.10 and 10.04, on two different machines. When trying to copy between two external drives connected to the same USB controller, the transfer will randomly hang at some random time (after copying 300MB, 1GB, 10GB - it doesn't appear to depend on the dataset being copied). The hang appears to happen faster in 10.04. It appears to happen slower if both drives are connected to a hub. If the drives are connected to 2 distinct physical ports on the machine, the hang will be very fast. Hangs cannot be reproduced if: Data is copied from the first external drive to an internal drive, then to the second external drive Drives are connected to different USB controllers, for example the first one is connected to the built-in controller and the second one via an external PCMCIA controller. lspci says the first machine has an Intel ICH9 USB controller, the second an Intel ICH4. Is this a hardware problem, a kernel problem or a software issue? I used Nautilus when copying the files.

    Read the article

  • How can I repair my USB drive?

    - by yurko
    USB drive is in read only state and I can't repair it. First of all I tried erase it using dd: root@yurko-laptop:/home/yurko-laptop# ls -l /dev/disk/by-id | grep usb lrwxrwxrwx 1 root root 9 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0 -> ../../sdb lrwxrwxrwx 1 root root 10 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0-part1 -> ../../sdb1 root@yurko-laptop:/home/yurko-laptop# dd if=/dev/zero of=/dev/sdb dd: ?????? ? «/dev/sdb»: ?? ?????????? ????????? ????? 8257537+0 ??????? ??????? 8257536+0 ??????? ???????? ??????????? 4227858432 ????? (4,2 GB), 942,633 c, 4,5 MB/c After that I wanted to create new filesystem using fdisk: root@yurko-laptop:/home/yurko-laptop# fdisk /dev/sdb You will not be able to write the partition table. WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdb: 4227 MB, 4227858432 bytes 4 heads, 63 sectors/track, 32768 cylinders Units = cylinders of 252 * 512 = 129024 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 18 32768 4126596 b W95 FAT32 Command (m for help): fdisk showed that the partition still exists and I can't write the partition table. I tried to delete the existing partition: Command (m for help): d Selected partition 1 Command (m for help): w Unable to write /dev/sdb root@yurko-laptop:/home/yurko-laptop# Why am I not be able to write the partition table? Does it mean that some hardware failure occurred? And is it possible to repair the current USB drive? I've tried to use hdparm and it showed that the readonly flag is on: root@yurko-laptop:/home/yurko-laptop# hdparm /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: f0 00 05 00 00 00 00 0a 00 00 00 00 26 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 multcount = 0 (off) readonly = 1 (on) readahead = 256 (on) geometry = 1016/131/62, sectors = 8257536, start = 0

    Read the article

  • Is it possible to have a wireless in-house NAS with wireless data transfer rates of equivalent to SATA speeds?

    - by techaddict
    Basically I would like to know, if it is possible to set up an NAS in my house to be accessed wirelessly, that can reach equivalent real-life data transfer speeds to USB 3.0 or an internal SATA hard drive. I have been wanting to do this for some time ( a couple of years now). Basically, this is what I want to do: Plug in a number of hard drives in an array, somewhere in my house, to be left plugged in and never have to be monitored. Ideally several terabytes. Whenever I am home, to have my computer and laptop configured to automatically find the NAS, as easy as plugging in an external hard drive - except completely wirelessly. Data transfer needs to be as seamless and quick as having added another internal hard drive in my laptop. Moreover, data should be able to accessed without having to copy it over - I should be able to wirelessly access the NAS and browse files, and open files directly from the NAS. For example, say I wanted to open a video - I should be able to play the video that is located on the NAS, directly from the NAS, completely wirelessly. If I wanted to open a .pdf file, I should be able to open it and read it directly from the NAS, as if it were located on my physical internal hard drive. Cost is important as well. Please tell me what equipment I need for this to be possible. I know you geniuses out there who can tell me if this is possible.

    Read the article

  • How can I access my music anywhere?

    - by musicfreak
    So here's the idea: I use multiple computers on an almost daily basis. I would like to be able to access my entire music library from any of those computers through the Internet. Is there a service or perhaps some software that would allow me to host my music "in the cloud", or in some other way access it from a different computer? I've searched for something like this and the closest I've found is the Media Player application found in Opera Unite, but that requires my home computer to be turned on at all times, which is less than ideal. I'm willing to pay, but not so much that I could just rent a private server for a lower price. Thanks in advance.

    Read the article

  • Unable to edit CIFS Share permissions

    - by Datapimp23
    Hi, I have this backup Disk to disk device HP Storageworks 2540i. Managing the device is via a web interface. I joined the device into our AD domain in the CIFS server configuration. I then created a CIFS share called backupdata. If I try to access it I'm prompted for a login. The permissions tab in the web interface is empty. The following message is displayed. "CIFS Authentication is managed through Active Directory" However I do not find the share in AD. I forced replication between all DCs and I do not find it. Is there another way to edit the permissions?

    Read the article

  • Using 2-port LSI 2308-8e card to control 24 SAS HDDs

    - by GregC
    I would like to rely on a RAID-on-chip solution to control 24 SAS hard drives in a direct-attached environment. How would you approach this to get best bandwidth given that I'd like to spend less than $10,000 on the interconnect. I've read that LSI 2308 chip can easily handle 8-drive SSD RAID6 in hardware. I'd like to harness its power to control 24 SAS hard drives over an expander in an external enclosure. Currently I use an Infortrend S24S-G2240 external enclosure. It provides its own controller and expander. I'd like to use LSI 2308 controller for RAID6 somehow instead of the mystery controller in the enclosure. P.S. I tried to create SAS-expander as a tag, but my rep on this site is low.

    Read the article

  • Is it generally a bad idea to have other types of virtual appliances installed along side a firewall

    - by MGSoto
    I want to run my Firewall/NAT software (pfsense) and an internal NAS (looking at freenas right now) for my SOHO on one machine. Right now I have them separated on two different machines, but I'd like to consolidate them. Is this generally a bad idea? I see the security concern where if the firewall or host OS is compromised, then your data is essentially screwed. But is it really a concern for me?

    Read the article

  • Recommendations for USB flash drive fast at writing small files

    - by Andrew Bainbridge
    I want a drive that I can be used as my work drive, storing a Subversion repo and sandbox for a small project. I'd also like it to be able to store a DVD rip. At the moment I've got a Super Talent pico-C 8gb. It's fast at reading and writing DVD rips, but the performance on small files (ie less than 4k) is utterly terrible (we're talking floppy disk speeds here). This Ars review measured a similar Super Talent drive and pretty much confirmed my measurements (take a look at the random write speeds on page 5). So, I'm looking for a 8gb or bigger drive that doesn't suck at read and write of small files and still has acceptable performance for very large files.

    Read the article

  • alias name in brocade

    - by wildchild
    how do i look for alias name using the WWN in brocade. Say i have created an alias "CentosNode2Port1" using switch show i get the WWN ,but how to look for the alias name. alishow (WWN) is not accepting. please help

    Read the article

  • How to set up a centralized backup server with lots of offsite workstations, intermittent internet connectivity, and stubborn users?

    - by Zac B
    This might be an impossible question. Context: We have a bunch of computers across around 1000 users. We have a centralized office where 900 of the users work, most of the time. Most of the computers are laptops. They are very frequently coming on and off the network for hours at a time. Users often take their computers home and do lots of work from home. In addition, there are a handful of users who work elsewhere in the country, who are offline (no internet connection whatsoever) for more than half of the time they use their machines. All of the machines are Windows 7/XP. Problem: People are always losing data. One day someone accidentally deletes a bunch of files. The next day someone else installs a bad driver or tries to mess with something in system32 and needs a personal data backup/reinstall of Windows. Because of how many of our business operations are done without an internet connection, and how frequently computers come on- and offline, it's unfeasible to make users use network storage for all of their data. We tried giving them Dropboxes, and they stored their files elsewhere. We bought and deployed Altiris, and they uninstalled it and blamed us when they couldn't get files back that they accidentally deleted while they were offline and hadn't taken a backup in months. We tried teaching them backup best-practices, and using scheduled sync tools to upload things to the network drives, and they turned them off because they "looked like viruses". It doesn't help that many of these users are pretty high up in the business and are not amicable to any sort of "you need to do something regularly because we say so" solution. Question: Other than finding another job where IT is treated differently and users are willing to follow best practices, how would people recommend I implement a file backup solution that supports the following: Backs up to a centralized server over LAN or WAN whenever a network link becomes available, or on a schedule. Supports interrupted/resumed backups (and hopefully file-delta only backups), since connections to the network (WAN or LAN) are often slow and only open for half an hour or so. Supports relatively rapid, "I accidentally deleted the TPS reports! Oh no!" single-file recovery, ideally administered from the central backup server rather than the client PC. Supports local-to-local file delta backup on a schedule, so that users without a network connection for a few days can still retrieve accidental deletions or whatnot. Ideally, the local stored backups would be pushed up to the server whenever network link is available. Isn't configurable on the clients without certain credentials. Because the CFOs (who won't give up their admin rights on the domain) will disable it if they can. Backs up the entire hard drive. There are people who are self-righteous about storing things in C:\, or in the recycle bin, or in the C:\Windows dir (yes, I know). I'm fine integrating multiple products/solutions, or scripting different programs together myself (I'm a somewhat competent programmer), but I've been drawing a blank on where to start. Dropbox is folder-specific, Altiris doesn't cope with LAN outages or interrupted/resumed backups, Volume Shadow Copy is awesome for a local-to-local solution, but I don't know how to push days of stored shadow copies up to a server in a 2 hour window of network access. The company is fine with spending decent money on this, thousands (USD) on a server, and hundreds on clients, if necessary. I want to emphasize that this isn't a shopping list request. While I wish there was a program out there that did what I want, I've looked pretty hard, and not found anything that fits the bill. Instead, I'm hoping for ideas on where to start hacking things together from scratch/from different technologies to make something stable that works. Cheers!

    Read the article

  • Saving music wisely: Why save 'Queen - Bohemian Rhapsody.mp3' millions of times?

    - by hsmit
    As far as I'm concerned, Queen's song 'bohemian rhapsody' is one of the most popular songs all time. But for the purpose of this message you may replace this with another track. At the same time I think 60% of the digital-music listeners have this track. Sometimes we have multiple copies: different versions of the track, different devices, unwanted duplicates in download folders, itunes folders etc.. Wouldn't it be much smarter to store these songs only once? You can imagine various solutions for this. How would you accomplish this? Some criteria that may help you find an answer: It must reduce disk space It must remember which music belongs to you (DRM) It must use network traffic efficiently

    Read the article

  • 4K sectors: Why are hard drives moving to 4096 byte sectors, vs. 512 byte sectors? Are 4K sectors a

    - by Chris W. Rea
    I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the actual de facto standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

    Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >