Search Results

Search found 29203 results on 1169 pages for 'state machine workflow'.

Page 44/1169 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

  • external hard drive not detected after ubuntu crash [restarting machine]

    - by Netmoon
    today i tried to watch movie [with vlc media player] from my external hard drive [expansion portable 500 GB], and it's play good, then pause the movie and play it again, and my Ubuntu crashed! [Ubuntu 12.04]i had to restart the machine, so did it, but after that Ubuntu can't recognize this hard drive! i changed USB cable but it was not effective. this is my dmesg command result : [ 191.281630] usb 2-1.3: new full-speed USB device number 9 using ehci_hcd [ 191.353527] usb 2-1.3: device descriptor read/64, error -32 [ 191.529115] usb 2-1.3: device descriptor read/64, error -32 [ 191.704669] usb 2-1.3: new full-speed USB device number 10 using ehci_hcd [ 191.776524] usb 2-1.3: device descriptor read/64, error -32 [ 191.952202] usb 2-1.3: device descriptor read/64, error -32 [ 192.127772] usb 2-1.3: new full-speed USB device number 11 using ehci_hcd [ 192.534742] usb 2-1.3: device not accepting address 11, error -32 [ 192.606749] usb 2-1.3: new full-speed USB device number 12 using ehci_hcd [ 193.013696] usb 2-1.3: device not accepting address 12, error -32 [ 193.013906] hub 2-1:1.0: unable to enumerate USB device on port 3 note: I am able to hear the sound of the external drive lens. When attach hard drive to usb port, the status light goes on, but it's low bright and i think its power is low! try to mount in Microsoft Windows 7, but nothing happened.

    Read the article

  • Setting up a network between a host and guest virtual machine

    - by anonymous
    (I'm running ubuntu server 12.04 on virtual box) I'm trying to transfer a file (scp) from my laptop to one of the directories of a virtual machine. I tried sharing folders, but that failed. I'm a bit of a networking newbie. I've looked at like 20-30 pages. Here's one: http://www.howtoforge.com/moving-files-between-linux-systems-with-scp I followed those steps exactly. My problem is that when I try using scp, it just hangs. I'm also not sure which network interface to configure (eth0, eth1?) in the guest OS. Another (significant?) detail is that the inet address of eth0 is 10.0.2.15 instead of something like 192.168.x.y. I've enabled the bridge adapter and the host-only adapter. Both the laptop and guest VM have openssh-server installed. I'm not sure what to do at this point. Is there a better place to ask about this?

    Read the article

  • Macbook Pro Wireless Reconnecting

    - by A Student at a University
    I'm using a WPA2 EAP network. I'm sitting next to the access point. The connection keeps dropping and taking ~10 seconds to reconnect. My other devices are staying online. What's causing it? syslog: 01:21:10 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:21:10 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX 01:21:10 NetworkManager[XX40]: <info> (eth1): DHCPv4 state changed reboot -> renew 01:21:10 NetworkManager[XX40]: <info> address XXX.XXX.XXX.XXX 01:21:10 NetworkManager[XX40]: <info> prefix 20 (XXX.XXX.XXX.XXX) 01:21:10 NetworkManager[XX40]: <info> gateway XXX.XXX.XXX.XXX 01:21:10 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:21:10 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:21:10 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:21:10 NetworkManager[XX40]: <info> domain name 'server.domain.tld' 01:21:10 dhclient: bound to XXX.XXX.XXX.XXX -- renewal in XXX seconds. 01:33:30 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:33:30 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX 01:33:30 dhclient: bound to XXX.XXX.XXX.XXX -- renewal in XXX seconds. 01:35:13 wpa_supplicant[XX60]: CTRL-EVENT-EAP-STARTED EAP authentication started 01:35:13 wpa_supplicant[XX60]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected 01:35:14 wpa_supplicant[XX60]: EAP-MSCHAPV2: Authentication succeeded 01:35:14 wpa_supplicant[XX60]: EAP-TLV: TLV Result - Success - EAP-TLV/Phase2 Completed 01:35:14 wpa_supplicant[XX60]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully 01:35:14 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> 4-way handshake 01:35:14 wpa_supplicant[XX60]: WPA: Key negotiation completed with XX:XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP] 01:35:14 NetworkManager[XX40]: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake 01:35:14 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:35:17 wpa_supplicant[XX60]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys 01:35:17 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> disconnected 01:35:17 NetworkManager[XX40]: <info> (eth1): supplicant connection state: disconnected -> scanning 01:35:26 wpa_supplicant[XX60]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys 01:35:26 NetworkManager[XX40]: <info> (eth1): supplicant connection state: scanning -> disconnected 01:35:29 NetworkManager[XX40]: <info> (eth1): supplicant connection state: disconnected -> scanning 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 8 -> 3 (reason 11) 01:35:32 NetworkManager[XX40]: <info> (eth1): deactivating device (reason: 11). 01:35:32 NetworkManager[XX40]: <info> (eth1): canceled DHCP transaction, DHCP client pid XX27 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) starting connection 'Auto XXXXXXXXXX' 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 3 -> 4 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... 01:35:32 NetworkManager[XX40]: <info> (eth1): supplicant connection state: scanning -> disconnected 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 4 -> 5 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1/wireless): access point 'Auto XXXXXXXXXX' has security, but secrets are required. 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 5 -> 6 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 6 -> 4 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 4 -> 5 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1/wireless): connection 'Auto XXXXXXXXXX' has security, and secrets exist. No new secrets needed. 01:35:32 NetworkManager[XX40]: <info> Config: added 'ssid' value 'XXXXXXXXXX' 01:35:32 NetworkManager[XX40]: <info> Config: added 'scan_ssid' value '1' 01:35:32 NetworkManager[XX40]: <info> Config: added 'key_mgmt' value 'WPA-EAP' 01:35:32 NetworkManager[XX40]: <info> Config: added 'password' value '<omitted>' 01:35:32 NetworkManager[XX40]: <info> Config: added 'eap' value 'PEAP' 01:35:32 NetworkManager[XX40]: <info> Config: added 'fragment_size' value 'XXX0' 01:35:32 NetworkManager[XX40]: <info> Config: added 'phase2' value 'auth=MSCHAPV2' 01:35:32 NetworkManager[XX40]: <info> Config: added 'ca_cert' value '/etc/ssl/certs/Equifax_Secure_CA.pem' 01:35:32 NetworkManager[XX40]: <info> Config: added 'identity' value 'XXXXXXX' 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. 01:35:32 NetworkManager[XX40]: <info> Config: set interface ap_scan to 1 01:35:32 NetworkManager[XX40]: <info> (eth1): supplicant connection state: disconnected -> scanning 01:35:36 wpa_supplicant[XX60]: Associated with XX:XX:XX:XX:XX:XX 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: scanning -> associated 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-EAP-STARTED EAP authentication started 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected 01:35:36 wpa_supplicant[XX60]: EAP-MSCHAPV2: Authentication succeeded 01:35:36 wpa_supplicant[XX60]: EAP-TLV: TLV Result - Success - EAP-TLV/Phase2 Completed 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: associated -> 4-way handshake 01:35:36 wpa_supplicant[XX60]: WPA: Could not find AP from the scan results 01:35:36 wpa_supplicant[XX60]: WPA: Key negotiation completed with XX:XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP] 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX:XX completed (reauth) [id=0 id_str=] 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:35:36 NetworkManager[XX40]: <info> Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'XXXXXXXXXX'. 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled. 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) started... 01:35:36 NetworkManager[XX40]: <info> (eth1): device state change: 5 -> 7 (reason 0) 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Beginning DHCPv4 transaction (timeout in 45 seconds) 01:35:36 NetworkManager[XX40]: <info> dhclient started with pid XX87 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) complete. 01:35:36 dhclient: Internet Systems Consortium DHCP Client VXXX.XXX.XXX 01:35:36 dhclient: Copyright 2004-2009 Internet Systems Consortium. 01:35:36 dhclient: All rights reserved. 01:35:36 dhclient: For info, please visit https://www.isc.org/software/dhcp/ 01:35:36 dhclient: 01:35:36 NetworkManager[XX40]: <info> (eth1): DHCPv4 state changed nbi -> preinit 01:35:36 dhclient: Listening on LPF/eth1/XX:XX:XX:XX:XX:XX 01:35:36 dhclient: Sending on LPF/eth1/XX:XX:XX:XX:XX:XX 01:35:36 dhclient: Sending on Socket/fallback 01:35:36 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:35:36 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX 01:35:36 dhclient: bound to XXX.XXX.XXX.XXX -- renewal in XXX seconds. 01:35:36 NetworkManager[XX40]: <info> (eth1): DHCPv4 state changed preinit -> reboot 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 4 of 5 (IP4 Configure Get) scheduled... 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 4 of 5 (IP4 Configure Get) started... 01:35:36 NetworkManager[XX40]: <info> address XXX.XXX.XXX.XXX 01:35:36 NetworkManager[XX40]: <info> prefix 20 (XXX.XXX.XXX.XXX) 01:35:36 NetworkManager[XX40]: <info> gateway XXX.XXX.XXX.XXX 01:35:36 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:35:36 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:35:36 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:35:36 NetworkManager[XX40]: <info> domain name 'server.domain.tld' 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled... 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 4 of 5 (IP4 Configure Get) complete. 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) started... 01:35:37 NetworkManager[XX40]: <info> (eth1): device state change: 7 -> 8 (reason 0) 01:35:37 NetworkManager[XX40]: <info> (eth1): roamed from BSSID XX:XX:XX:XX:XX:XX (XXXXXXXXXX) to XX:XX:XX:XX:XX:XX (XXXXXXXXX) 01:35:37 NetworkManager[XX40]: <info> Policy set 'Auto XXXXXXXXXX' (eth1) as default for IPv4 routing and DNS. 01:35:37 NetworkManager[XX40]: <info> Activation (eth1) successful, device activated. 01:35:37 NetworkManager[XX40]: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete. 01:35:43 wpa_supplicant[XX60]: Trying to associate with XX:XX:XX:XX:XX:XX (SSID='XXXXXXXXXX' freq=2412 MHz) 01:35:43 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> associating 01:35:43 wpa_supplicant[XX60]: Association request to the driver failed 01:35:46 wpa_supplicant[XX60]: Associated with XX:XX:XX:XX:XX:XX 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: associating -> associated 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: associated -> 4-way handshake 01:35:46 wpa_supplicant[XX60]: WPA: Key negotiation completed with XX:XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP] 01:35:46 wpa_supplicant[XX60]: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX:XX completed (reauth) [id=0 id_str=] 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:40:47 wpa_supplicant[XX60]: WPA: Group rekeying completed with XX:XX:XX:XX:XX:XX [GTK=TKIP] 01:40:47 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> group handshake 01:40:47 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:50:19 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:50:19 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX

    Read the article

  • MINSCN?Cache Fusion Read Consistent

    - by Liu Maclean(???)
    ????? ???Ask Maclean Home ???  RAC ? Past Image PI????, ?????????,???11.2.0.3 2 Node RAC??????????: SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com SQL> drop table test purge; Table dropped. SQL> alter system flush buffer_cache; System altered. SQL> create table test(id number); insert into test values(1); insert into test values(2); commit; /* ???? rowid??TEST????2????????? */ select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from test; DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) DBMS_ROWID.ROWID_RELATIVE_FNO(ROWID) ------------------------------------ ------------------------------------                                89233                                    1                                89233                                    1 SQL> alter system flush buffer_cache; System altered. Instance 1 Session A ??UPDATE??: SQL> update test set id=id+1 where id=1; 1 row updated. Instance 1 Session B ??x$BH buffer header?? ?? ??Buffer??? SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0;      STATE CR_SCN_BAS ---------- ----------          1          0          3    1227595 X$BH ??? STATE????Buffer???, ???????: STATE NUMBER KCBBHFREE 0 buffer free KCBBHEXLCUR 1 buffer current (and if DFS locked X) KCBBHSHRCUR 2 buffer current (and if DFS locked S) KCBBHCR 3 buffer consistant read KCBBHREADING 4 Being read KCBBHMRECOVERY 5 media recovery (current & special) KCBBHIRECOVERY 6 Instance recovery (somewhat special) ????????????? : state =1 Xcurrent ? state=2 Scurrent ? state=3 CR ??? Instance 2  ?? ????????????? ,???? gc current block 2 way  ??Current Block ??? Instance 2, ?? Instance 1 ??”Current Block” Convert ? Past Image: Instance 2 Session C SQL> update test set id=id+1 where id=2; 1 row updated. Instance 2 Session D SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1227641 3 1227638 STATE =1 ?Xcurrent block???? Instance 2 , ??? Instance 1 ??? GC??: Instance 1 Session B SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0;      STATE CR_SCN_BAS ---------- ----------          3    1227641          3    1227638          8          0          3    1227595 ???????, ??????Instance 1??session A????TEST??SELECT??? ,????? 3? State=3?CR ? ??????1?: Instance 1 session A ?????UPDATE? session SQL> alter session set events '10046 trace name context forever,level 8:10708 trace name context forever,level 103: trace[rac.*] disk high'; Session altered. SQL> select * from test;         ID ----------          2          2 select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0;       STATE CR_SCN_BAS ---------- ----------          3    1227716          3    1227713          8          0 ?????????v$BH ????CR????,?????SELECT??? CR????????,???????? ?????????? ??X$BH?????? , ?????CR??SCN Version???: 1227641?1227638?1227595, ?SELECT?????? 2???SCN version?CR? 1227716? 1227713 ???, Oracle????????? ?????????SELECT??????event 10708? rac.*???TRACE,??????TRACE??: PARSING IN CURSOR #140444679938584 len=337 dep=1 uid=0 oct=3 lid=0 tim=1335698913632292 hv=3345277572 ad='bc0e68c8' sqlid='baj7tjm3q9sn4' SELECT /* OPT_DYN_SAMP */ /*+ ALL_ROWS IGNORE_WHERE_CLAUSE NO_PARALLEL(SAMPLESUB) opt_param('parallel_execution_enabled', 'false') NO_PARALLEL_INDEX(SAMPLESUB) NO_SQL_TUNE */ NVL(SUM(C1),0), NVL(SUM(C2),0) FROM (SELECT /*+ NO_PARALLEL("TEST") FULL("TEST") NO_PARALLEL_INDEX("TEST") */ 1 AS C1, 1 AS C2 FROM "SYS"."TEST" "TEST") SAMPLESUB END OF STMT PARSE #140444679938584:c=1000,e=27630,p=0,cr=0,cu=0,mis=1,r=0,dep=1,og=1,plh=1950795681,tim=1335698913632252 EXEC #140444679938584:c=0,e=44,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,plh=1950795681,tim=1335698913632390 *** 2012-04-29 07:28:33.632 kclscrs: req=0 block=1/89233 *** 2012-04-29 07:28:33.632 kclscrs: bid=1:3:1:0:7:80:1:0:4:0:0:0:1:2:4:1:26:0:0:0:70:1a:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:4:3:2:1:2:0:3f:0:1c:86:2d:4:0:0:0:0:a2:3c:7c:b:70:1a:0:0:0:0:1:0:7a:f8:76:1d:1:2:dc:5:a9:fe:17:75:0:0:0:0:0:0:0:0:0:0:0:0:63:e5:0:0:0:0:0:0:10:0:0:0 2012-04-29 07:28:33.632578 : kjbcrc[0x15c91.1 76896.0][9] 2012-04-29 07:28:33.632616 : GSIPC:GMBQ: buff 0xba1e8f90, queue 0xbb79f278, pool 0x60013fa0, freeq 1, nxt 0xbb79f278, prv 0xbb79f278 2012-04-29 07:28:33.632634 : kjbmscrc(0x15c91.1)seq 0x2 reqid=0x1c(shadow 0xb4bb4458,reqid x1c)mas@2(infosz 200)(direct 1) 2012-04-29 07:28:33.632654 : kjbsentscn[0x0.12bbc1][to 2] 2012-04-29 07:28:33.632669 : GSIPC:SENDM: send msg 0xba1e9000 dest x20001 seq 24026 type 32 tkts xff0000 mlen x17001a0 2012-04-29 07:28:33.633385 : GSIPC:KSXPCB: msg 0xba1e9000 status 30, type 32, dest 2, rcvr 1 *** 2012-04-29 07:28:33.633 kclwcrs: wait=0 tm=689 *** 2012-04-29 07:28:33.633 kclwcrs: got 1 blocks from ksxprcv WAIT #140444679938584: nam='gc cr block 2-way' ela= 689 p1=1 p2=89233 p3=1 obj#=76896 tim=1335698913633418 2012-04-29 07:28:33.633490 : kjbcrcomplete[0x15c91.1 76896.0][0] 2012-04-29 07:28:33.633510 : kjbrcvdscn[0x0.12bbc1][from 2][idx 2012-04-29 07:28:33.633527 : kjbrcvdscn[no bscn <= rscn 0x0.12bbc1][from 2] *** 2012-04-29 07:28:33.633 kclwcrs: req=0 typ=cr(2) wtyp=2hop tm=689 ??TRACE???? ?????????TEST??????, ???????Dynamic Sampling?????,???????TEST?? CR???,???????’gc cr block 2-way’ ??: 2012-04-29 07:28:33.632654 : kjbsentscn[0x0.12bbc1][to 2] 12bbc1= 1227713  ???X$BH????CR???,kjbsentscn[0x0.12bbc1][to 2] ????? ? Instance 2 ???SCN=12bbc1=1227713   DBA=0x15c91.1 76896.0 ?  CR Request(obj#=76896) ??kjbrcvdscn????? [no bscn <= rscn 0x0.12bbc1][from 2] ,??? ??receive? SCN Version =12bbc1 ???Best Version CR Server Arch ??????????????????SELECT??: PARSING IN CURSOR #140444682869592 len=18 dep=0 uid=0 oct=3 lid=0 tim=1335698913635874 hv=1689401402 ad='b1a188f0' sqlid='c99yw1xkb4f1u' select * from test END OF STMT PARSE #140444682869592:c=4999,e=34017,p=0,cr=7,cu=0,mis=1,r=0,dep=0,og=1,plh=1357081020,tim=1335698913635870 EXEC #140444682869592:c=0,e=23,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1357081020,tim=1335698913635939 WAIT #140444682869592: nam='SQL*Net message to client' ela= 7 driver id=1650815232 #bytes=1 p3=0 obj#=0 tim=1335698913636071 *** 2012-04-29 07:28:33.636 kclscrs: req=0 block=1/89233 *** 2012-04-29 07:28:33.636 kclscrs: bid=1:3:1:0:7:83:1:0:4:0:0:0:1:2:4:1:26:0:0:0:70:1a:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:4:3:2:1:2:0:2:0:1c:86:2d:4:0:0:0:0:a2:3c:7c:b:70:1a:0:0:0:0:1:0:7d:f8:76:1d:1:2:dc:5:a9:fe:17:75:0:0:0:0:0:0:0:0:0:0:0:0:63:e5:0:0:0:0:0:0:10:0:0:0 2012-04-29 07:28:33.636209 : kjbcrc[0x15c91.1 76896.0][9] 2012-04-29 07:28:33.636228 : GSIPC:GMBQ: buff 0xba0e5d50, queue 0xbb79f278, pool 0x60013fa0, freeq 1, nxt 0xbb79f278, prv 0xbb79f278 2012-04-29 07:28:33.636244 : kjbmscrc(0x15c91.1)seq 0x3 reqid=0x1d(shadow 0xb4bb4458,reqid x1d)mas@2(infosz 200)(direct 1) 2012-04-29 07:28:33.636252 : kjbsentscn[0x0.12bbc4][to 2] 2012-04-29 07:28:33.636358 : GSIPC:SENDM: send msg 0xba0e5dc0 dest x20001 seq 24029 type 32 tkts xff0000 mlen x17001a0 2012-04-29 07:28:33.636861 : GSIPC:KSXPCB: msg 0xba0e5dc0 status 30, type 32, dest 2, rcvr 1 *** 2012-04-29 07:28:33.637 kclwcrs: wait=0 tm=865 *** 2012-04-29 07:28:33.637 kclwcrs: got 1 blocks from ksxprcv WAIT #140444682869592: nam='gc cr block 2-way' ela= 865 p1=1 p2=89233 p3=1 obj#=76896 tim=1335698913637294 2012-04-29 07:28:33.637356 : kjbcrcomplete[0x15c91.1 76896.0][0] 2012-04-29 07:28:33.637374 : kjbrcvdscn[0x0.12bbc4][from 2][idx 2012-04-29 07:28:33.637389 : kjbrcvdscn[no bscn <= rscn 0x0.12bbc4][from 2] *** 2012-04-29 07:28:33.637 kclwcrs: req=0 typ=cr(2) wtyp=2hop tm=865 ???, “SELECT * FROM TEST”??????’gc cr block 2-way’??:2012-04-29 07:28:33.637374 : kjbrcvdscn[0x0.12bbc4][from 2][idx 2012-04-29 07:28:33.637389 : kjbrcvdscn[no bscn ??Foreground Process? Remote LMS??got?? SCN=1227716 Version?CR, ??? ?????X$BH ?????scn??? ??????????Instance 1????2?SCN???CR?, ???????????Instance 1 Buffer Cache?? ??SCN Version ???CR ??????? ?????????: SQL> alter system set "_enable_minscn_cr"=false scope=spfile; System altered. SQL> alter system set "_db_block_max_cr_dba"=20 scope=spfile; System altered. SQL> startup force; ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance ORACLE instance started. Total System Global Area 1570009088 bytes Fixed Size 2228704 bytes Variable Size 989859360 bytes Database Buffers 570425344 bytes Redo Buffers 7495680 bytes Database mounted. Database opened. ???? “_enable_minscn_cr”=false ? “_db_block_max_cr_dba”=20 ???RAC????, ??????: ?Instance 2 Session C ?update??????? ?????Instance 1 ????? ,????Instance 1?Request CR SQL> update test set id=id+1 where id=2; -- Instance 2 1 row updated. SQL> select * From test; -- Instance 1 ID ---------- 1 2 ??? Instance 1? X$BH?? select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0;  STATE CR_SCN_BAS ---------- ---------- 3 1273080 3 1273071 3 1273041 3 1273039 8 0 SQL> update test set id=id+1 where id=3; 1 row updated. SQL> select * From test; ID ---------- 1 2 SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 3 1273091 3 1273080 3 1273071 3 1273041 3 1273039 8 0 ................... SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 3 1273793 3 1273782 3 1273780 3 1273769 3 1273734 3 1273715 3 1273691 3 1273679 3 1273670 3 1273643 3 1273635 3 1273623 3 1273106 3 1273091 3 1273080 3 1273071 3 1273041 3 1273039 3 1273033 19 rows selected. SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 3 1274993 ????? ???? “_enable_minscn_cr”(enable/disable minscn optimization for CR)=false ? “_db_block_max_cr_dba”=20 (Maximum Allowed Number of CR buffers per dba) 2? ??? ????? Instance 1 ??????????? ?? 19????CR?? “_enable_minscn_cr”?11g??????????,???Oracle????CR????SCN,?Foreground Process Receive????????????(SCN??)?SCN Version CR Block??????CBC?? SCN??????CR? , ?????????Buffer Cache??????? ????SCN Version?CR????,????? ?????????? ?????Snap_Scn ?? SCN?? ?????????Current SCN, ??????CR??????????????????????, ????Buffer Cache? ?????????? CR?????????, ?????? “_db_block_max_cr_dba” ???????, ???????????20 ,??????Buffer Cache?????19????CR?; ???”_db_block_max_cr_dba” ???????6 , ?????Buffer cache????????CR ???????6?? ??”_enable_minscn_cr” ??CR???MINSCN ??????, ?????????CR???????, ????? Foreground Process??????CR Request , ?? Holder Instance LMS ?build?? BEST CR ??, ?????????

    Read the article

  • Not enough physical memory available to run Virtual Machine

    - by unknown (google)
    hi I when i am trying to run virtual machine on VMW 6.5 it shows me following error. "Not enough physical memory is available to power on this virtual machine with its configured settings. To fix this problem, adjust the additional memory settings to allow more virtual machine memory to be swapped. If you were able to power on this virtual machine on this host computer in the past, try rebooting the host computer. Rebooting may allow you to use slightly more host memory to run virtual machines." i have also tried options that are suggested from above error, but still its not working. Can you help me to solve this problem? Thanks

    Read the article

  • Web Client Service constantly in 'Stopping' state

    - by Mark
    I have a user who's Web Client service constantly reports that it's in the 'Stopping' state and it's hindering her ability to save JMP files to a SharePoint site using the UNC path. She's running Windows XP Service Pack 3. I've tried modifying the Web Client parameters in the registry for UseBasicAuth and FileAttributesLimitInBytes with no luck. When I set the service to Manual and then try to start it after Windows boots up, it starts and then immediately goes into the Stopping state again. Other things I've tried: Removing/Reinstalling her network card Removing/Reinstalling the Client for Microsoft Networks and File and Print Sharing Checked that the BITS and RPC services are running fine (not sure if they're related) Does anyone have any other ideas? Is there a way to repair/rebuild the Web Client service?

    Read the article

  • How to Configure Windows Machine to Allow File Sharing with DNS Alias

    - by Michael Ferrante
    I have not seen a single article posted anywhere online that brings together all the settings one would need to do to make this work properly on Windows, so I thought I would post it here. To facilitate failover schemes, a common technique is to use DNS CNAME records (DNS Aliases) for different machine roles. Then instead of changing the Windows computername of the actual machine name, one can switch a DNS record to point to a new host. This can work on Microsoft Windows machines, but to make it work with file sharing the following configuration steps need to be taken. Outline The Problem The Solution Allowing other machines to use filesharing via the DNS Alias (DisableStrictNameChecking) Allowing server machine to use filesharing with itself via the DNS Alias (BackConnectionHostNames) Providing browse capabilities for multiple NetBIOS names (OptionalNames) Register the Kerberos service principal names (SPNs) for other Windows functions like Printing (setspn) References 1. The Problem On Windows machines, file sharing can work via the computer name, with or without full qualification, or by the IP Address. By default, however, filesharing will not work with arbitrary DNS aliases. To enable filesharing and other Windows services to work with DNS aliases, you must make registry changes as detailed below and reboot the machine. 2. The Solution Allowing other machines to use filesharing via the DNS Alias (DisableStrictNameChecking) This change alone will allow other machines on the network to connect to the machine using any arbitrary hostname. (However this change will not allow a machine to connect to itself via a hostname, see BackConnectionHostNames below). Edit the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters and add a value DisableStrictNameChecking of type DWORD set to 1. Allowing server machine to use filesharing with itself via the DNS Alias (BackConnectionHostNames) This change is necessary for a DNS alias to work with filesharing from a machine to find itself. This creates the Local Security Authority host names that can be referenced in an NTLM authentication request. To do this, follow these steps for all the nodes on the client computer: To the registry subkey HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0, add new Multi-String Value BackConnectionHostNames In the Value data box, type the CNAME or the DNS alias, that is used for the local shares on the computer, and then click OK. Note: Type each host name on a separate line. Providing browse capabilities for multiple NetBIOS names (OptionalNames) Allows ability to see the network alias in the network browse list. Edit the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters and add a value OptionalNames of type Multi-String Add in a newline delimited list of names that should be registered under the NetBIOS browse entries Names should match NetBIOS conventions (i.e. not FQDN, just hostname) Register the Kerberos service principal names (SPNs) for other Windows functions like Printing (setspn) NOTE: Should not need to do this for basic functions to work, documented here for completeness. We had one situation in which the DNS alias was not working because there was an old SPN record interfering, so if other steps aren't working check if there are any stray SPN records. You must register the Kerberos service principal names (SPNs), the host name, and the fully-qualified domain name (FQDN) for all the new DNS alias (CNAME) records. If you do not do this, a Kerberos ticket request for a DNS alias (CNAME) record may fail and return the error code KDC_ERR_S_SPRINCIPAL_UNKNOWN. To view the Kerberos SPNs for the new DNS alias records, use the Setspn command-line tool (setspn.exe). The Setspn tool is included in Windows Server 2003 Support Tools. You can install Windows Server 2003 Support Tools from the Support\Tools folder of the Windows Server 2003 startup disk. How to use the tool to list all records for a computername: setspn -L computername To register the SPN for the DNS alias (CNAME) records, use the Setspn tool with the following syntax: setspn -A host/your_ALIAS_name computername setspn -A host/your_ALIAS_name.company.com computername 3. References All the Microsoft references work via: http://support.microsoft.com/kb/ Connecting to SMB share on a Windows 2000-based computer or a Windows Server 2003-based computer may not work with an alias name Covers the basics of making file sharing work properly with DNS alias records from other computers to the server computer. KB281308 Error message when you try to access a server locally by using its FQDN or its CNAME alias after you install Windows Server 2003 Service Pack 1: "Access denied" or "No network provider accepted the given network path" Covers how to make the DNS alias work with file sharing from the file server itself. KB926642 How to consolidate print servers by using DNS alias (CNAME) records in Windows Server 2003 and in Windows 2000 Server Covers more complex scenarios in which records in Active Directory may need to be updated for certain services to work properly and for browsing for such services to work properly, how to register the Kerberos service principal names (SPNs). KB870911 Distributed File System update to support consolidation roots in Windows Server 2003 Covers even more complex scenarios with DFS (discusses OptionalNames). KB829885

    Read the article

  • Windows 7 Machine Makes Router Drop -All- Wireless Connections

    - by Hammer Bro.
    Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

    Read the article

  • Restoring Time Machine from two Macs onto one (new) mac

    - by Dan
    My parents used to have two Macs...a "iLamp-style" iMac for my Dad, and an iBook G4 for my Mom. A while back, I had setup the iMac to have an external Firewire Hard Drive for a Time Machine Volume, and backed up both the iMac and iBook to that drive. Recently, the iBook died and the iMac was really slow to work with. So my parents decided to replace the iBook with an iPad, and also purchased a Mac Mini. I need to help my parents get their data from their two computers (backed up by Time Machine) onto the same machine. Pretty much everything is identical between the two systems (same apps, etc), however, they both have individual email accounts and photos that they want to retain. Is it possible to do two Time Machine restores onto one computer?

    Read the article

  • How to ping virtualbox guest machine by hostname?

    - by Punit Soni
    Here is the summary. VirtualBox 4.2.18 Host OS: Windows 7 Guest OS: Ubuntu 12.04 Networking: Bridged Adaptor I can ping Host and other machines in host's network from ubuntu guest using hostnames. But, I can only ping the guest machine using IP address from host and network machines. I have avahi-daemon running on Guest OS. I want to be able to ping/ssh the guest machine from host and other machines on network using hostname of the guest machine. Please help.

    Read the article

  • Word documents very slow to open over network, but fine when opened locally - on one machine

    - by Craig H
    Windows XP, Word 2003, patched. The issue is happening with several Word documents stored on a network drive. The Word documents are clearly a bit wonky (i.e. one is 675k, but if you copy everything but the last paragraph marker into a new document, the new document is only 30k). But that's only part of the problem. On one weird machine, and one machine only, it takes ~20 seconds to open these Word documents from the network drive. Copy the file to C: on that werid machine? Opens immediately. Go to other machines (that are very similar - same patch level, etc.) and open the same document from the network? Opens immediately. Delete normal.dot? 20 seconds. Login with a different user on the weird machine? 20 seconds. Plug wonky machine into a different network port? 20 seconds. So the problem appears to be hardware related (i.e. wonky internal NIC) or related to a setting that is not profile specific. Any ideas? "Scrubbing" all the documents isn't ideal for several reasons. This is driving me nuts because I swear I ran into this before many years ago and eventually figured it out. But I appear to have lost my notes.

    Read the article

  • Mimic the behavior of a machine added to a domain

    - by Ian
    Hello, For some reason, the IT department at our company does not want to add Windows 7 and Windows Vista machine to the domain controller. I hate to always provide my network credentials everytime I access a shared folder on a machine that is joined to the domain. I also hate to always provide my password when I launch outlook or Visual Studio (Team Explorer). Is there a way to mimic the behavior of a machine that is added to a domain without actually adding the machine in the domain? For shares, I can create a batch file that will NET USE the different fileservers we use here but that is a huge security risk as I will type my password as plaintext. Thanks!

    Read the article

  • SSH port forwarding through Windows machine

    - by Leonardo Ramé
    is it possible to connect to an SSH server only accessible from inside a network, using a Windows machine without SSH as a gateway?. Let me clarify my question with a sketch: Me (Linux machine)--- WIN (Windows without SSHD)---LIN (Linux with SSHD). Machine Me, is the PC I'm using to connect to LIN through WIN. WIN is accessible from the outside, it has an RDESKTOP port open, and LIN is only accessible from inside the network. Hope you understand the question.

    Read the article

  • IOC Container Handling State Params in Non-Default Constructor

    - by Mystagogue
    For the purpose of this discussion, there are two kinds of parameters an object constructor might take: state dependency or service dependency. Supplying a service dependency with an IOC container is easy: DI takes over. But in contrast, state dependencies are usually only known to the client. That is, the object requestor. It turns out that having a client supply the state params through an IOC Container is quite painful. I will show several different ways to do this, all of which have big problems, and ask the community if there is another option I'm missing. Let's begin: Before I added an IOC container to my project code, I started with a class like this: class Foobar { //parameters are state dependencies, not service dependencies public Foobar(string alpha, int omega){...}; //...other stuff } I decide to add a Logger service depdendency to the Foobar class, which perhaps I'll provide through DI: class Foobar { public Foobar(string alpha, int omega, ILogger log){...}; //...other stuff } But then I'm also told I need to make class Foobar itself "swappable." That is, I'm required to service-locate a Foobar instance. I add a new interface into the mix: class Foobar : IFoobar { public Foobar(string alpha, int omega, ILogger log){...}; //...other stuff } When I make the service locator call, it will DI the ILogger service dependency for me. Unfortunately the same is not true of the state dependencies Alpha and Omega. Some containers offer a syntax to address this: //Unity 2.0 pseudo-ish code: myContainer.Resolve<IFoobar>( new parameterOverride[] { {"alpha", "one"}, {"omega",2} } ); I like the feature, but I don't like that it is untyped and not evident to the developer what parameters must be passed (via intellisense, etc). So I look at another solution: //This is a "boiler plate" heavy approach! class Foobar : IFoobar { public Foobar (string alpha, int omega){...}; //...stuff } class FoobarFactory : IFoobarFactory { public IFoobar IFoobarFactory.Create(string alpha, int omega){ return new Foobar(alpha, omega); } } //fetch it... myContainer.Resolve<IFoobarFactory>().Create("one", 2); The above solves the type-safety and intellisense problem, but it (1) forced class Foobar to fetch an ILogger through a service locator rather than DI and (2) it requires me to make a bunch of boiler-plate (XXXFactory, IXXXFactory) for all varieties of Foobar implementations I might use. Should I decide to go with a pure service locator approach, it may not be a problem. But I still can't stand all the boiler-plate needed to make this work. So then I try this: //code named "concrete creator" class Foobar : IFoobar { public Foobar(string alpha, int omega, ILogger log){...}; static IFoobar Create(string alpha, int omega){ //unity 2.0 pseudo-ish code. Assume a common //service locator, or singleton holds the container... return Container.Resolve<IFoobar>( new parameterOverride[] {{"alpha", alpha},{"omega", omega} } ); } //Get my instance: Foobar.Create("alpha",2); I actually don't mind that I'm using the concrete "Foobar" class to create an IFoobar. It represents a base concept that I don't expect to change in my code. I also don't mind the lack of type-safety in the static "Create", because it is now encapsulated. My intellisense is working too! Any concrete instance made this way will ignore the supplied state params if they don't apply (a Unity 2.0 behavior). Perhaps a different concrete implementation "FooFoobar" might have a formal arg name mismatch, but I'm still pretty happy with it. But the big problem with this approach is that it only works effectively with Unity 2.0 (a mismatched parameter in Structure Map will throw an exception). So it is good only if I stay with Unity. The problem is, I'm beginning to like Structure Map a lot more. So now I go onto yet another option: class Foobar : IFoobar, IFoobarInit { public Foobar(ILogger log){...}; public IFoobar IFoobarInit.Initialize(string alpha, int omega){ this.alpha = alpha; this.omega = omega; return this; } } //now create it... IFoobar foo = myContainer.resolve<IFoobarInit>().Initialize("one", 2) Now with this I've got a somewhat nice compromise with the other approaches: (1) My arguments are type-safe / intellisense aware (2) I have a choice of fetching the ILogger via DI (shown above) or service locator, (3) there is no need to make one or more seperate concrete FoobarFactory classes (contrast with the verbose "boiler-plate" example code earlier), and (4) it reasonably upholds the principle "make interfaces easy to use correctly, and hard to use incorrectly." At least it arguably is no worse than the alternatives previously discussed. One acceptance barrier yet remains: I also want to apply "design by contract." Every sample I presented was intentionally favoring constructor injection (for state dependencies) because I want to preserve "invariant" support as most commonly practiced. Namely, the invariant is established when the constructor completes. In the sample above, the invarient is not established when object construction completes. As long as I'm doing home-grown "design by contract" I could just tell developers not to test the invariant until the Initialize(...) method is called. But more to the point, when .net 4.0 comes out I want to use its "code contract" support for design by contract. From what I read, it will not be compatible with this last approach. Curses! Of course it also occurs to me that my entire philosophy is off. Perhaps I'd be told that conjuring a Foobar : IFoobar via a service locator implies that it is a service - and services only have other service dependencies, they don't have state dependencies (such as the Alpha and Omega of these examples). I'm open to listening to such philosophical matters as well, but I'd also like to know what semi-authorative reference to read that would steer me down that thought path. So now I turn it to the community. What approach should I consider that I havn't yet? Must I really believe I've exhausted my options?

    Read the article

  • VMware virtual machine network devices malfunctioning

    - by sheepz
    I'm running Ubuntu 10.04 LTS and VMvware workstation 7.0.1 build-227600. The virtual machine i'm running in VMware is a custom distribution built on Debian Linux version 3.1. I'm still pretty much a beginner with UNIX administration. After having messed around with the vmware (changed only the name of the folder, the vmx and and other .v* files accordingly in which the .vmx was situated, and the configuration in the vmx file accordingly), the network devices on the virtual machine do not work anymore. The virtual machine is used for securely sending messages. The virtual machine: As far as I know, this perl file called proxy-gen-ifalias eth0 is responsible for properly setting up the two virtual network devices eth0 and eth1. The Virtual machine comes with a GUI interface in which I have set up two ethernet network devices, one internal, the other external. Now, after having messed around with this, the UI gives me this error message: perl proxy-gen-ifalias eth0 /etc/modprobe.d/alias-eth0 /sbin/update-modules perl proxy-gen-ifalias eth1 /etc/modprobe.d/alias-eth1 /sbin/update-modules ifdown eth0 ifdown: interface eth0 not configured ifdown eth1 ifdown: interface eth1 not configured perl proxy-gen-netcfg /etc/network/interfaces ifup eth0 SICCSIFADDR: No such device eth0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device eth0: ERROR while getting interface flags: No such device Failed to bring up eth0. ifconfig eth0 eth0: error fetching interface information: Device not found make: *** [/etc/network/interfaces] Error 1 ~ Here are the contents of the two perl files referred to in the message: paste.pocoo.org/show/2AMzAYhoCRZqlGY7wUFk/ proxy-gen-netcfg

    Read the article

  • Issue with VMWare vSphere and NFS: re occurring apd state

    - by Bastian N.
    I am experiencing issues with VMWare vSphere 5.1 and NFS storage on 2 different setups, which result in an "All Path Down" state for the NFS shares. This first happened once or twice a day, but lately it occurs much more frequent, as specially when Acronis Backup jobs are running. Setup 1 (Production): 2 ESXi 5.1 hosts (Essentials Plus) + OpenFiler with NFS as storage Setup 2 (Lab): 1 ESXi 5.1 host + Ubuntu 12.04 LTS with NFS as storage Here is an example from the vmkernel.log: 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 248: APD Timer started for ident [987c2dd0-02658e1e] 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 395: Device or filesystem with identifier [987c2dd0-02658e1e] has entered the All Paths Down state. 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 846: APD Start for ident [987c2dd0-02658e1e]! 2013-05-28T08:07:37.485Z cpu0:2052)NFSLock: 610: Stop accessing fd 0x410007e4cf28 3 2013-05-28T08:07:37.485Z cpu0:2052)NFSLock: 610: Stop accessing fd 0x410007e4d0e8 3 2013-05-28T08:07:41.280Z cpu1:2049)StorageApdHandler: 277: APD Timer killed for ident [987c2dd0-02658e1e] 2013-05-28T08:07:41.280Z cpu1:2049)StorageApdHandler: 402: Device or filesystem with identifier [987c2dd0-02658e1e] has exited the All Paths Down state. 2013-05-28T08:07:41.281Z cpu1:2049)StorageApdHandler: 902: APD Exit for ident [987c2dd0-02658e1e]! 2013-05-28T08:07:52.300Z cpu1:3679)NFSLock: 570: Start accessing fd 0x410007e4d0e8 again 2013-05-28T08:07:52.300Z cpu1:3679)NFSLock: 570: Start accessing fd 0x410007e4cf28 again As long as the issue occurred once or twice a day it really wasn't a problem, but now this issue has impact on the VMs. The VMs get slow or even hang, resulting in a reset through vCenter in the production environment. I searched the web extensively and asked in forums, but till now nobody was able to help me. Based on blog posts and VMWare KB articles I tried the following NFS settings: Net.TcpipHeapSize = 32 Net.TcpipHeapMax = 128 NFS.HartbeatFrequency = 12 NFS.HartbeatMaxFailures = 10 NFS.HartbeatTimeout = 5 NFS.MaxQueueDepth = 64 Instead of NFS.MaxQueueDepth = 64 I already tried other settings like NFS.MaxQueueDepth = 32 or even NFS.MaxQueueDepth = 1. Unfortunately without any luck. It would be great if someone could help me on this issue. It is really annoying. Thanks in advance for all the help. [UPDATE] As I explained in the comment below, here is the network setup: On the production setup the NFS traffic is bound to a separate VLAN with ID 20. I am using a HP 1810 24 Port Switch. The OpenFiler system is connected to the VLAN with 4 Intel GbE NICs with dynamic LACP. The ESXis both have 4 Intel GbE NICs using 2 static LACP trunks containing 2 NICs each. One pair is connected to the regular LAN and the other one to the VLAN 20. And here is a screenshot of the vSwitch: Switch configuration: Port configuration: On the lab setup its a single Intel NIC on each side without VLAN, but with different IP subnet.

    Read the article

  • MVC pattern and (Game) State pattern

    - by topright
    Game States separate I/O processing, game logic and rendering into different classes: while (game_loop) { game->state->io_events(this); game->state->logic(this); game->state->rendering(); } You can easily change a game state in this approach. MVC separation works in more complex way: while (game_loop) { game->cotroller->io_events(this); game->model->logic(this); game->view->rendering(); } So changing Game States becomes error prone task (switch 3 classes, not 1). What are practical ways of combining these 2 concepts?

    Read the article

  • iPhone -- MKReverseGeocoder.adminstrativeArea -- getting state abbreviation

    - by rayjohannessen
    In the documentation for MKReverseGeocoder, the administrativeArea property gives you the current state the user is in, and it mentions in an example that it returns EITHER the state name OR its abbreviation. I am wondering if anyone knows how to get the abbreviation instead of the full state name...I have been able to find nothing that shows this is even a possibility besides that brief example that doesn't mention HOW. Thanks!

    Read the article

  • implementing a state machine using the "yield" keyword

    - by Matt Warren
    Is it feasible to use the yield keyword to implement a simple state machine as shown here. To me it looks like the C# compiler has done the hard work for you as it internally implements a state machine to make the yield statement work. Can you piggy-back on top of the work the compiler is already doing and get it to implement most of the state machine for you? Has anyone done this, is it technically possible?

    Read the article

  • KVM machine does not start ssh, network is started, used to work

    - by lleto
    have been searching an pulling my hear out for the last 6 hours. I have a virtual machine that has been running fine for the last six months. I was happy ssh'ing into it and it was running a database and some small apps. Tonight ssh stopped working, so I decided to reboot the machine. I now have the following situation: virsh list --all states machine as running I can ping the machine and get a reply When I ssh to the machine I see "ssh: connect to host [myserver] port 22: Connection refused" nmap does not show port 22 as open I have tried to: - reboot the machine once more (no luck) - mount the filesystem and check /etc/ssh/sshd.conf (has not changed since working situation) - install virsh console, however this does not seem to work When I mount the fs directly using losetup the strange thing is that file dates seem to be frozen in /var/log/ around the time of the crash. If I look in /var/run/ I can see an sshd.pid, but the time is 6 hours ago (and numerous reboots). My virsh xml looks like this: <domain type='kvm' id='21'> <name>myserver</name> <uuid>09678c8d-a99b-1d18-a7af-88d027cc8f93</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/dev/disk01/myserver'/> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:e3:13:86'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes' listen='127.0.0.1'> <listen type='address' address='127.0.0.1'/> </graphics> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='apparmor' relabel='yes'> <label>libvirt-09678c8d-a99b-1d18-a7af-88d027cc8f93</label> <imagelabel>libvirt-09678c8d-a99b-1d18-a7af-88d027cc8f93</imagelabel> </seclabel> </domain> I'm sort of lost as to where I can look to get the machine up and running again. On the same instance of kvm I have another server running which is working fine. Both are Ubuntu 12.04. All help is welcome....

    Read the article

  • Server Core remote management from Windows 7 machine

    - by Robert Koritnik
    I've installed Remote Server Administration Tools for Windows 7 because I would like to administer my Windows Server 2008 R2 Server Core machine. The problem that I'm getting when I try to run Server Manager is: Connecting to remote server failed with the following error message: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. This is what I've done so far: I'm running WinRM service on both machines (Server and Window 7) I've added my server to trusted hosts on my Windows 7 machine: winrm set winrm/config/client @{TrustedHosts="WINSRV2"} I've added registry entry on Windows 7 machine: reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v LocalAccountTokenFilterPolicy /t REG_DWORD /d 1 /f I've enabled Remote Management inbound rule on server firewall using CoreConfigurator 2.0 both machines are in the same subnet and when I search for network machines on Windows 7 I see my server. Question What else should I do to make it work? I would like to run several different remote management tools against my server machine.

    Read the article

  • Debian Lenny - network interfaces(eth) are in DOWN state

    - by pachanga
    Folks, I'm facing a very weird problem with one of my production servers(it's Debian Lenny) - after reboot network interfaces(eth0,eth1) are in DOWN state. Looks like an Intel based networking adapter is installed on the server, lspci lists it as follows: Ethernet controller: Intel Corporation Device 10c9 (rev 01) The kernel driver responsible for this adapter is "igb". I tried "modprobe -r igb && modprobe igb", network interfaces first disappear then appear, but they are in DOWN state again. What could go wrong? It used to be working just fine. How can this be fixed?

    Read the article

  • High CPU usage on Linux machine

    - by user305210
    I have a piece of java code running on two different machines, but on one of the linux machines, the code uses alot of CPU (close to 100% cpu usage). On the other machine the same code uses less cpu (under 3 to 4%). The machine where cpu usage is high, is a more powerful machine, more CPU and and more memory. This has started happening recently and performance on the machine with high cpu usage has degraded significantly. I am wondering if anyone has any ideas why something like this could happen, possible causes behind this etc. any guesses? No recent changes in hardware were made, no recent code updates... Thank you.

    Read the article

  • Windows 7 Machine Makes Router Drop -All- Wireless Connections [closed]

    - by Hammer Bro.
    Note: I accidentally originally posted this question over at SuperUser, and I still think the issue is caused by some low-level networking practice of Windows 7, but I think the expertise here would be more apt to figuring it out. Apologies for the cross-post. Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

    Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >