Search Results

Search found 11608 results on 465 pages for 'usb extension'.

Page 44/465 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• Running Ubuntu off a USB drive?

  - by Solignis

  I was wondering if a USB 2.0 Thumb drive has enough bandwidth to act as a primary system drive in an Ubuntu Linux server. More specifically an SAN server. I am running an iSCSI target, ZFS and NFS-kernel-server, BIND9 (Slave), and Openldap (Slave). I was thinking of resorting to a thumb drive because my new motherboard only has 4 SATA ports and I have 5 disks. 4 (ZFS Pool) 1 (System). And unless I get an expansion card there is no way to get more SATA ports. This "server" leans more twords a home server. I use in my lab with my VMware server. It provides storage, or atleast it did until it died. Would it still be better to go with the SATA hard disk?

  Read the article

• USB flash drive showing empty but half of the capacity is in Used

  - by tamakisquare

  Not sure if I should post my question in superuser, but it looks like the most appropriate place among all StackExchange sites. I have a 16GB Kingston DataTraveler USB drive. When I tried to use it this morning, it showed up nothing in there but yet its details showed that half of the capacity was in used. I tried it with OS X, Ubuntu, and Windows 7 and the results were the same. I tried to create a new folder and it worked. Apparently, the drive is working but somehow not showing my previously stored data. Note that I was still using the drive last night and there wasn't any problems. Following @rob's suggestion, du -h gave me: 16K ./.Trashes 960K ./.Spotlight-V100/Store-V1/Stores/2620683B-A38B-42F4-A247-45CAF4826ADE 976K ./.Spotlight-V100/Store-V1/Stores 1008K ./.Spotlight-V100/Store-V1 1.0M ./.Spotlight-V100 1.1M And, df -h gave me: /dev/sdb1 15G 7.9G 7.1G 53% /media/KINGSTON Confirming what I reported. Anyone got a clue/answer to this issue? Thanks.

  Read the article

• Windows 8 apps not connecting to internet with USB dongle/modem

  - by Relborg

  The question pretty much says it all. I have Windows 8 Professional 64-bit and my main/only method of getting connected to the internet is to use this USB dongle/modem I have. Now it works perfectly, but when I go into the Windows "store" app it keeps on saying that I'm not connected to the web. In fact this happens for all "apps", they all think I'm not connected to the web when I actually am. Normal desktop applications e.g. browsers run fine. Is this a bug that has still not been resolved or is there some setting I need to go mess with? Thanks in advance!

  Read the article

• Installed Ubuntu on usb drive, now it's read-only and can't be formatted

  - by weiszam

  I installed Ubuntu (ubuntu-13.04-desktop-amd64) on a 8 gb pendrive. Because it worked pretty slow, I wanted to change it back to a normal pendrive. But this is what happened. Windows7 can't open the usb drive, can't view files or anything, can't access attributes. When I select to format, it says it can't format it because it is write-protected. Tried the same running from an Ubuntu, and trying from a booted GParted thing. When I view the partitions, they can't be deleted either. What should I do to get it formatted?

  Read the article

• Mounting external usb harddisk (ext4) in virtual box in windows

  - by twall

  I would like to mount my external linux formatted usb harddrive in a virtual machine. The host is windows 7. Unfortunately virtual box doesn't enumerate the external harddrive in the options menu of the virtual machine, even though it shows all other devices connected to the host. Windows can find the harddrive, but obviously just gives me the option to reformat it, because it doesn't support ext4. (ext2fsd or Ext2Read are no options, as I need newer ext4 features) How can I add a filter for my external harddrive so it is recognized by my virtual machine?

  Read the article

• PHP extension wrapper for C++

  - by Yijinsei

  Hi guys, I am new in this area of writing extension for PHP, however I need to create a wrapper class for C++ to PHP. I am currently using PHP 5.2.13. I read this article http://devzone.zend.com/article/4486-Wrapping-C-Classes-in-a-PHP-Extension, a tutorial on how I could proceed to wrap C++ class to communicate with PHP Zend however it is written to for linux system. Do you guys have any article or advice on how I could proceed to write a wrapper class to communicate with PHP?

  Read the article

• Problem about Chrome Extension

  - by Gnu

  Hi! I try to write an extension and i saw the very restricted policy security. I should create an extension that allows me to listen and download podcast from web. It is possible? I use Chrome OS with VMWare, this OS has additional Api than Google Chrome Browser? Thanks

  Read the article

• Pass variables to current tab via chrome extension

  - by iamthejeff

  I am writing my first chrome extension, and I want to pass a variable to the currently opened tab and manipulate the DOM with it. My extension has a button, and when clicked, is executing this code: chrome.tabs.getSelected(null, function(tab) { chrome.tabs.executeScript(tab.id, { file: 'tabscript.js' }); }); This works fine, but I see no way to pass a variable to tabscript.js so it can be used on the opened tab.

  Read the article

• In an extension method how do a create an object based on the implementation class

  - by Greg

  Hi, In an extension method how do a create an object based on the implementation class. So in the code below I wanted to add an "AddRelationship" extension method, however I'm not sure how within the extension method I can create an Relationship object? i.e. don't want to tie the extension method to this particular implementation of relationship public static class TopologyExtns { public static void AddNode<T>(this ITopology<T> topIf, INode<T> node) { topIf.Nodes.Add(node.Key, node); } public static INode<T> FindNode<T>(this ITopology<T> topIf, T searchKey) { return topIf.Nodes[searchKey]; } public static bool AddRelationship<T>(this ITopology<T> topIf, INode<T> parentNode, INode<T> childNode) { var rel = new RelationshipImp(); // ** How do I create an object from teh implementation // Add nodes to Relationship // Add relationships to Nodes } } public interface ITopology<T> { //List<INode> Nodes { get; set; } Dictionary<T, INode<T> > Nodes { get; set; } } public interface INode<T> { // Properties List<IRelationship<T>> Relationships { get; set; } T Key { get; } } public interface IRelationship<T> { // Parameters INode<T> Parent { get; set; } INode<T> Child { get; set; } } namespace TopologyLibrary_Client { class RelationshipsImp : IRelationship<string> { public INode<string> Parent { get; set; } public INode<string> Child { get; set; } } } public class TopologyImp<T> : ITopology<T> { public Dictionary<T, INode<T>> Nodes { get; set; } public TopologyImp() { Nodes = new Dictionary<T, INode<T>>(); } } thanks

  Read the article

• Detecting own posts on Facebook from a Chrome extension perspective

  - by Bane

  I want to create a Chrome extension that will automatically like every post I make on Facebook. My question is, how can I detect when I post something, and if that post if mine? Is there an event that occurs or something? (And just for the record, I know that these sorts of things are impossible when other apps post on my behalf, at least from an extension perspective. So I'm only concentrating on posts that I actually click the "post" button, or enter for, myself.)

  Read the article

• developing browser extension for content filtering

  - by user272483

  i'm developing an application for content filtering. i'll use it as web service but my problem is that i hadn't developed any extension for firefox or ie before. i read some about firefox extensions and now i know a little about it. firstly can i use web service in a firefox/ie extension? if yes, can you give me a link of tutorial or sth like that? all suggestions are welcome. thx..

  Read the article

• Trigger events from Firefox browser extension?

  - by Alex

  Hello, I want to trigger events from a firefox extension, specifically click events. I've tried jQuery's .click() as well as the whole: var evt = document.createEvent("HTMLEvents"); evt.initEvent("click", true, false ); toClick[0].dispatchEvent(evt); This is not working for me, and I was wondering if this is even possible? (to trigger events from a firefox extension)? If so, how does one do it?

  Read the article

• Adding a custom option using an extension in Magento

  - by Tom

  I'm creating a custom extension and I would like to add a custom option when a certain item is purchased. For example, when the product "Name Tag" is purchased, the extension would detect that the specific product has been ordered and assign a custom option of "Year" to it. The user does not see this, but the attribute is added and displayed in the admin when viewing the order. Are there any specific listeners our there to accomplish this?

  Read the article

• recursively add file extension to all files

  - by seengee

  I have a few directories and sub-directories containing files with no file extension. I want to add .jpg to all the files contained within these directories. I have seen bash scripts for changing the file extension but not for just adding one. It also needs to be recursive, can someone help please?

  Read the article

• Chrome extension - Localstorage not working

  - by Bjarki Jonasson

  I'm writing a Chrome extension that uses a content script to modify certain parts of a website. The content script worked fine until I tried to add an options page to my extension. Right now I'm using an options.html file to save user preferences to localstorage, as you can see here: <html> <head><title>Options</title></head> <script type="text/javascript"> function save_options() { var select = document.getElementById("width"); var width = select.children[select.selectedIndex].value; localStorage["site_width"] = width; } function restore_options() { var fwidth = localStorage["site_width"]; if (!fwidth) { return; } var select = document.getElementById("width"); for (var i = 0; i < select.children.length; i++) { var child = select.children[i]; if (child.value == fwidth) { child.selected = "true"; break; } } } </script> <body onload="restore_options()"> Width: <select id="width"> <option value="100%">100%</option> <option value="90%">90%</option> <option value="80%">80%</option> <option value="70%">70%</option> </select> <br> <button onclick="save_options()">Save</button> </body> </html> I also have a background.html file to handle the communication between the content script and the localstorage: <html> <script type="text/javascript"> chrome.extension.onRequest.addListener(function(request, sender, sendResponse) { if (request.method == "siteWidth") sendResponse({status: localStorage["site_width"]}); else sendResponse({}); }); </script> </html> Then there's the actual content script that looks like this: var Width; chrome.extension.sendRequest({method: "siteWidth"}, function(response) { width = response.status; }); None of that code actually works. It looks solid enough to me but I'm not a very experienced programmer so I might be wrong. Could someone explain localstorage to me in layman's terms?

  Read the article

• About extension methods

  - by Srinivas Reddy Thatiparthy

  Shall i always need to throw ArgumentNullException(well,extension methods in Enumerable throw ArgumentNullException) when an extension method is called on null?I would like to have a clarification on this?If the answer is an Yes and No please present both the cases.

  Read the article

• Dualboot 12.04/windows 7 After installation from USB reboot straight to Windows with no option to select ubuntu and no boot loader

  - by Alkatraz

  windows 7 home premium intel i5 2500k CPU ASUSP8Z68-V PRO Motherboard GeForce GTX 570 GPU corsair 120Gb SSD (windows 7 os) WD 1tb HDD I select the USB drive in the BIOS and boot to it and choose install. i select to manually configure partitions, partition the 200gb of unallocated space on my 1Tb HDD into 16Gb swap file 30Gb / extf4 and 154Gb /home extf4. I make sure that the boot loader is installed to corsair 120Gb SSD (where the windows boot is) and installation goes smoothly. When i reboot after install it runs through bios strait into windows. I have tried upwards of a dozen times and i have also tried with linuxmint. I have also redownloaded the ISO and used two different programs to create the live usb. the installation seems to go well as i can see the partitions i have created in the windows device manager after install http://imgur.com/Wp0V1 I currently run lubuntu on my laptop but it is not a dual boot. i'm assuming this is a boot loader issue and i am assuming that inside those partitioned files in my screenshot there is a working OS of ubuntu 12.04 i just have no way of getting to it.

  Read the article

• 14.04.1 LTS 64 bit from USB does not see my windows 7 when I go to install it

  - by W J

  I suppose this is as much a question as a heads up/warning 14.04.1 LTS only gave me the option of writing over everything on one of my windows 7 machines. If I'd pushed the wrong button and continued I would have lost some mighty important items. On a similar windows laptop I succesfully installed 14.04.1 LTS 32 bit alongside windows 7 rather easily ( and I dig it!), there was a prompt in that case that let me select to install it alongside my windows OS.Yikes, not in this case. This laptop was formatted NTFS, the Ubuntu usb pendrive I formatted fat32. could be a clue? It looks like there is an advanced install ubuntu, but I am not that advanced. I may try to use windows diskformat (What fdisk is gone?) to make a partition, then see if the ubuntu on my usb stick "sees" my windows. If anybody has a better plan let me know. Mahalo AHA!? p.s. its a SSD harddrive, perhaps thats the crux?

  Read the article

• How to automount NTFS usb sticks on Xubuntu 12.10?

  - by netimen

  I'm running the Xubuntu 12.10 on a Lenovo T520 laptop. If I plug a FAT formatted usb stick, it's mounted automatically, but if I plug in a NTFS formatted one, I have to mount it manually. How to make NTFS usb sticks to mount automatically when plugged? My /etc/fstab in case it helps: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=cd221c3e-44a8-459e-9dfb-04787f1cd0b6 none swap sw

  Read the article

• How can I install from a 9.04 live USB/DVD?

  - by bstpierre

  I have a 9.04 (Jaunty) ISO burned to a USB stick; it appears to be a "live DVD". When I boot from it, I get a GRUB menu listing: Ubuntu, with Linux 2.6.35-generic (This matches the system currently installed on the HDD?) Ubuntu, with Linux 2.6.35-generic (recovery mode) Memory test Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1) Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1) Ubuntu 9.04, memtest86+ (on /dev/sda1) When I select Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1), I arrive at the desktop of a 9.04 system. I want to wipe the HDD clean and install 9.04. (Upgrading to something newer is not an option; this version is required by a legacy application.) How can I install from this live USB image? I vaguely remember some incantation that I should be able to use in the booted system, but my google-fu is broken at the moment. I'm comfortable with low-level commands, so if you want to recommend a more hard-core strategy, I'm willing to roll with it without requiring a ton of detail...

  Read the article

• Best Easiest Fastest No Install USB Boot Disk in 4 Simple Steps :)

  - by PearlFactory

  USB Boot Disk When you look how to create USB Boot Disk on the web it is a nightmare   Here is the easiest I use that works for all MS prods At a computer running Windows Vista, Windows 7, or Windows Server 2008, run a command prompt as administrator and execute the following: Make Sure you have all explorer windows closed and nothing referencing the USB i.e a doc open in Word 1. C:\> diskpart DISKPART> list disk [Identify disk # of the USB key] DISKPART> sel disk 1 [assuming 1 was the # from above] DISKPART> clean [CAUTION—will wipe whichever disk is selected] DISKPART> cre part pri DISKPART> active DISKPART> assign DISKPART> format fs=ntfs quick DISKPART> exit C:\> exit 2. Copy the contents of the Windows Server 2008 R2 or any other MS OS  DVD/ISO to the USB key. 3. From the system tray, use the “Safely remove hardware” icon to safely remove the USB key from the computer. This helps ensure that all files have been fully written to the USB key. (Especially after the large file copy) 4. Restart,,,put usb in and Find reference from HP h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-1317ENW.pdf

  Read the article

• Booting Ubuntu 13.10 form USB on server with no OS (Dell PowerEdge T110)

  - by user35581

  I have a Dell PowerEdge T110 (Xeon 1220v2) server with no OS. From my mac, I was able to save the Ubuntu 13.10 for server iso (x86) and used UNetbootin to save the iso to a USB stick (2GB). I was hoping to boot the server from USB, and all seemed to be going well, BIOS even detected my USB drive when I plugged it in, but for some reason I'm getting a "Missing operating system" error. I checked the USB drive and it appears that UNetbootin put the correct files on it form a cursory glance (although I'm not entirely sure what I should be looking for). Should I be able to boot a server with no OS from a UNetbootin created Ubuntu 13.10 USB? And if so, why might BIOS not find the right files? I had read that there is a USB Emulation setting in BIOS, but I haven't been able to find this in the menus. My understanding is that by default, this is set to on. I might try wiping the USB stick and running UNetbootin again. The USB is formatted to MS-DOS FAT16 (should it be formatted some other way?).

  Read the article

• Remove Kernel Lock from Unmounted Mass Storage USB Device from the Command Line in Linux

  - by Casey

  I've searched high and low, and can't figure this one out. I have a older Olympus Camera (2001 or so). When I plug in the USB connection, I get the following log output: $ dmesg | grep sd [20047.625076] sd 21:0:0:0: Attached scsi generic sg7 type 0 [20047.627922] sd 21:0:0:0: [sdg] Attached SCSI removable disk Secondly, the drive is not mounted in the FS, but when I run gphoto2 I get the following error: $ gphoto2 --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') *** What command will unmount the drive. For example in Nautilus, I can right click and select "Safely Remove Device". After doing that, the /dev/sg7 and /dev/sdg devices are removed. The output of gphoto2 is then: # gphoto2 --list-config /Camera Configuration/Picture Settings/resolution /Camera Configuration/Picture Settings/shutter /Camera Configuration/Picture Settings/aperture /Camera Configuration/Picture Settings/color /Camera Configuration/Picture Settings/flash /Camera Configuration/Picture Settings/whitebalance /Camera Configuration/Picture Settings/focus-mode /Camera Configuration/Picture Settings/focus-pos /Camera Configuration/Picture Settings/exp /Camera Configuration/Picture Settings/exp-meter /Camera Configuration/Picture Settings/zoom /Camera Configuration/Picture Settings/dzoom /Camera Configuration/Picture Settings/iso /Camera Configuration/Camera Settings/date-time /Camera Configuration/Camera Settings/lcd-mode /Camera Configuration/Camera Settings/lcd-brightness /Camera Configuration/Camera Settings/lcd-auto-shutoff /Camera Configuration/Camera Settings/camera-power-save /Camera Configuration/Camera Settings/host-power-save /Camera Configuration/Camera Settings/timefmt Some things I've tried already are sdparm and sg3_utils, however I am unfamiliar with them, so it's possible I just didn't find the right command. Update 1: # mount | grep sdg # mount | grep sg7 # umount /dev/sg7 umount: /dev/sg7: not mounted # umount /dev/sdg umount: /dev/sdg: not mounted # gphoto2 --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') ***

  Read the article

• USB Hardware vs. Software Write Lock

  - by TreyK

  I'm in the market for a USB flash drive, and remember this cool feature a tiny 32MB flash drive of mine had: a write lock switch. This seemed like it would be an amazing feature to have as a shield against any nastiness happening to the drive on an unfamiliar computer. However, very few drives on the market offer this feature. Instead, it seems that forms of software protection are the more prominent method. This software protection causes me a bit of uneasiness, as it seems like this software wouldn't be nearly as bulletproof as a physical switch. Also, levels of protection seem to vary from product to product. Being able to protect certain folders from reading and/or writing would be nice, but is the security trade-off worth it? Just how effective can this software protection be? Wouldn't a simple format be able to clean any drive with software protection? My drive must also be compatible with Windows XP, Vista, and 7, as well as Linux and Mac. What would be the best way forward for getting a well-sized (~8GB) flash drive with a strong write protection implementation, for little or no more than a regular drive? Thanks.

  Read the article

• Issues with creating USB bootable Mountain Lion

  - by Sidd

  I am trying to set up a triple boot Windows 8, Mountain Lion, and Ubuntu. I am stuck though. I have got Windows 8 on a partition, and I am trying to get Mountain Lion on there at this point. I installed a VMware with a Snow Leopard 10.6.2 image on the Windows 8 platform. I used the disk utility in this program in order to get Mountain Lion on there. This is what i did specifically: I got the installesd.dmg. I 'mounted' that file or whatever you call it, and out came something along the lines of "Install Mountain Lion OS x" (something like that - it was like a submenu under the installesd.dmg in the disk utility). I got my PNY 8 gb Attache Flash Drive and went to the Erase tab of disk utility. I erased it using the Mac OS Extended (Journaled) setting and called it "Mac". I went to the Restore tab, dragged "Mac" into destination, and dragged "Install Mountain Lion OS x" to the source. Everything seemed to go well, but it didn't. When trying to boot from the flash drive (and yes, I set the BIOS correctly), it skipped it, and loaded Windows 8 normally as if nothing was plugged in. When I try looking at the flash drive in windows 8, it comes up as a 200 mb capacity drive labeled "EFI" with nothing in it (remember, it was 8gb in the beginning). I downloaded Plop Boot Manager, but it did not recognize a USB being plugged in. Does anyone know how I could fix this?

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >