Search Results

Search found 2448 results on 98 pages for 'vmware vcenter'.

Page 44/98 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

  • Network speed between a VM and another machine which is not residing on the same host, is 11MB/s at most

    - by Henno
    Problem Network speed between a VM and another machine which is not residing on the same host, is 11MB/s at most. Topology Facts ESXi5 version is 5.0.0.504890 VM has the latest Vmware Tools installed VM is using E1000 network driver Physical box has Win Srv 2008 R2 as the OS CrystalDiskMark says the drive on physical box can read/write 100MB/s vCenter is another vm on esx both vm and physical box are showing 1Gbps link speed Configuration Networking shows vmnic0 as 1000 Full NTttcp is a client/server tool from Microsoft for measuring pure network throughput Here's what I've done so far: Test1: VM is running Filezilla FTP Server (default settings, one user account made) Physical box is running Filezilla FTP Client (default settings) Physical box is uploading a big file to FTP server Transfer speed (as observed by Windows Task Manager on both machines): ~11MB/s (bad) Physical box is downloading that file from FTP server Transfer speed (as observed by Windows Task Manager on both machines): still ~11MB/s (bad) Could it be disk performance issue? Test2: Physical box is running ntttcpr.exe -a 6 -m 6,0,VM_IP_ADDRESS VM is running ntttcps.exe -a 6 -m 6,0,PHY_BOX_IP_ADDRESS Transfer speed (as observed by Windows Task Manager on both machines): ~11MB/s (bad) Could it be switch performance issue? Test3: physical box is running vSphere Client I open Summary Storage datastore Browse Datastore... from physical box and upload a file to datastore Transfer speed (as observed by Windows Task Manager on physical box): ~26-36MB/s (good) Could it be a vm specific issue? Test4: Installed ntttcp to another vm on the same esx server Measured network performance between vms on the same esx server with NTttcp Transfer speed (as observed by Windows Task Manager on physical box): ~90-120MB/s (excellent :) Test5: I have another esx server on the same site, connecting to the same datastore and same switch. Those two ESX servers have both 2 NICs. One NIC goes to switch while the other goes directly to the other ESX server. vMotioned one of the testing vms off to the other ESX host Measured network performance between vms on different esx servers with NTttcp Transfer speed (as observed by Windows Task Manager on physical box): ~11MB/s (bad) While I'm aware of these: ESXi 4.1 slow file transfer ESXi 5 network performance is slow Debian Etch and ESXi slow network speeds VMWare ESXi slow file copy to guest they did not help (or I must have been missed something)

    Read the article

  • How do I add a WMware ESXi Host to Microsoft Virtual Machine Manager?

    - by user63250
    I am trying to manage virtual machines running on a VMware ESXi host using Microsoft System Center Virtual Machine Manager. I was able to add the ESXi machine using the "Add VMware VirtualCenter server" option, but can't access any of the VMs on the datastore associated with this ESXi server. The datastore of the ESXi box is showing up with the correct name, but it won't let me see any of the VMs that have already been created; I get "There are no virtual machines on this host." Because I couldn't get any of the existing virtual machines to show up, I tried creating some new ones. When using VMM to connect to ESXi and create new VMs, I get the following error messages in the "rating explanation" section: The virtualization software on the selected host does not support virtual hard disks on an IDE bus. and The virtualization software on the host XXXXXX does not support the creation of dynamic virtual hard disk. Any ideas on why I can't manage existing machines and why I can't create new ones? The existing machines were created in vSphere. I should note that the ESXi server and the server running SCVMM are both on the same domain. I should also note that although the ESXi box has been added as a VirtualCetner server, when I try to add it through the "Add Host" option, I get an error message saying "Virtual Machine Manager cannot complete the VirtualCenter action on server EXSi because of the following error: The operation is not supported on the object."

    Read the article

  • ESXi 5 Guests will not boot

    - by Adrian
    I have a problem with Guests not booting under VMWare ESXi 5.0 on my IBM x3550M3 server. Note: Investigation eventually determined that problem was with the VMware client on a Lenovo Edge laptop, the only Windows box available in a Linux IT shop. vSphere Client v4 and v5 duplicated behavior on the Lenovo Edge. As indicated in the comment to the accepted answer, replacing the workstation with one using different video was the "fix" for this particular issue. The ESXi host boots just fine. The Client connects just fine. Guests can be configured but do not successfully boot. The initial guest memory consumption jumps up to 560MB and drops down to 40MB after a few seconds. Initial CPU usage is 1 full CPU (3000Ghz per the chart) and immediately drops downm to 29Mhz. Guests do not display any output in the Console tab but show a state of 'Powered On'. No errors in the Events tab. Switching Guest from BIOS to EFI makes no difference. VMs are listed as Version 7 and the behavior is duplicated across all availabled Guest OS flavors. Problem also duplicated when server is booted up in Legacy Only mode. Logs do not contain anything particularly suspicious. Edit: No firewalls, routers, or VLANs in between the client and server. Edit 2: We have tried to Boot Guest into BIOS screen at Next Boot checkbox in the Guest Setting. Was not successful. Edit 3: 500GB datastore with 1 40GB VM on it. Plenty of space. Edit 4: Guests copied from my old ESXi 4 server DO NOT boot on the ESXi 5 system. Initially it complains about too little Video RAM being configured for the default 2500x1600, but it still doesn't work properly even after I bump the Video RAM settings or switch it to Auto-Detect.

    Read the article

  • Best Practice - SQL 2012 & IIS in VMWare

    - by Dan Ribar
    We are pretty new to VMWare and looking for some thoughts on our environment. We have a VMWare cluster that has on one host: VM#1: MS Windows 2008 R2 Enterprise & SQL Server 2012 VM#2: MS Windows 2008 R2 Standard & IIS The IIS asp.net app talks directly to the SQL Server. We had this similar environment on physical servers a few months ago and just recently moved to the virtualized environment. Regarding the setup, we have not tweaked any of the vm resource parameters -- all is set as standard and all is working. What is observed is that the VMs seem to spool down and we get lags in response. Of course this sin't as fast as the old physical environment, but I am wondering if: *is it a good idea to run the SQL server and the IIS server on the same host? They are the only two VMs on it. The host is a new Dell R620 with 192 gb mem. does it make sense to change any CPU or memory reservations when it doesn't seem like there is any contention is there a way to keep the VMs spooled up to eliminate delays? This is a brand new squeaky clean vanilla install. What are your thoughts?

    Read the article

  • Strange issue ! Local network cache of PHP and Apache2 on Win Server 2008 R2

    - by Ahmed Benlahsen
    Software configuration : I have a new Server with windows server 2008 R2 installed via VMWare. I have installed Apache2.2, PHP5.2 and MySQL5.5 as separated packages. Issue : On my first installation of my application all works great. When I updated some JS and CSS files then I access to my application again from a PC on local network I get the old JS and CSS versions! But when I access to the same application on local server I got the latest versions of those files! Link of my application on local server is : http://localhost/BADIL Link of my application from local network is : http://LOCAL_SERVER_IP/BADIL I never had this kind of issue! I think that there are some cache but I don't know where! Maybe on Win Server 2008 R2 or on VMWare ! The question is : Why when I access to my application on the server all works fine, but when I access to the same application from a local network I have the old version of JS and CSS files?? Any one can help me please?! Regards.

    Read the article

  • Dead Linux server - need help and options

    - by Choi S.
    All, I have a Dell PE 1950 w/ 2 SATA drives in a software RAID1. OS is CentOS 5.5 (2.6.18.x). Starting this afternoon we received HW errors (something on the bus is bad, E171F) and the machine became unresponsive. We hard booted and it came back up for about 5 hours but then it happened again. I'm trying to figure out our options. Unfortunately we do not have similar hardware but I have a small desktop that I can use. I was contemplating putting one of the drives into the desktop and then starting it up. My goal was to then P2V it using Vmware converter but apparently the free v5.x doesn't support hot cloning/converting on a RAID volume, only the Enterprise 4.x version of Converter does. My questions are: 1.) Is putting a single drive out of a RAID1 pair into another piece of HW is safe? Based on my research and understanding it appears to be but would like confirmation. 2.) Is there any work around to the Vmware Converter not supporting RAID volumes during a hot clone/convert session? 3.) Are there other options I'm overlooking? Thanks in advance for reading and responding. --Choi S.

    Read the article

  • "Dictionary problem." Error with VMPlayer

    - by George Mauer
    I'm pretty new to using vmware virtualization (been a virtualbox user) so I'm hoping you guys can help me out. I recently got an external usb disk containing a vm for a client, downloaded vmplayer, set it up with "Open a Virtual Machine", ran it, easy as pie. After working with it a bit this morning, I shut the VM down and now trying to start it back up again I get this: I tried removing the vm from my library, now it happens whenever I try to add it back in. In the meantime, I can still access other virtual machines so it seems like the problem might be with the virtual disk. So two questions: This is obviously not a very helpful error message. Where can I go to get more information? My Application EventLog doesn't contain anything from VMWare. What steps can I take to fix the problem? Edit: A couple more pieces of information. I did not take any snapshots. I don't think VM Player even has that ability. I have a zip file of (what I assume) is the state of the VM when it was sent to me. I cannot unzip it as it is huge and simply requires more HD space than I have available but I did extract the vmx file and examine it. Other than the UUIDs and the fact that mine reads cleanShutdown = "FALSE" they are identical. The log contains the following lines Jun 23 10:11:18.080: vmx| SNAPSHOT: SnapshotConfigInfoRead: Unable to load dict from 'E:....\MachineName.vmsd'. Jun 23 10:11:18.080: vmx| SNAPSHOT: SnapshotConfigInfoRead failed for file 'E:....\MachineName.vmx': Dictionary problem (6) Jun 23 10:11:18.082: vmx| SNAPSHOT: Snapshot_TimeStampTiers failed: Dictionary problem (6)

    Read the article

  • windows: force user to use specific network adapter

    - by Chad
    I'm looking for a configuration/hack to force a particular application or all traffic from a particular user to use a specific NIC. I have an legacy client/server app that has a "security feature" that limits connections based on IP address. I'm trying to find a way to migrate this app to a terminal server environment. The simple solution is for the development team to update the code in the application, however in this case that's not an option. I was thinking I might be able to install VMware NIC's installed for each user on the terminal server and do some type of scripting to force that user account to use a specific NIC. Anybody have any ideas on this? EDIT 1: I think I have a hack to work around my specific problem, however I'd love to hear of a more elegant solution. I got lucky in that the software reads the server IP address out of a config file. So I'm going to have to make a config file for each user and make a customer programs files for each user. Then add a VMware NIC for each user and make each server IP address reside on a different subnet. That will force the traffic for a particular user to a particular IP address, however its really messy and all the VM NIC's will slow down the terminal server. I'll setup a proof of concept Monday and let the group know how it affects performance.

    Read the article

  • Why can't a PC with 2 network cards be accessed by hostname?

    - by lewis
    I set up PC with 2 network cards, connected to the same LAN. I can connect to this PC (e.g. by remote desktop) only via ip-addresses. Accessing by hostname does not work. Why is this the case? UPDATE: Full environment 1. PC with 2 hardware network adapters. 2. On this PC installed VMWare Workstation. Created 3 VM's, networked by "bridged" network setting in VMWare. 3. In LAN all ip-addresses given from DHCP. 4. Win2k8 on all hosts (both physical and vitrual). As result: 1. PC has 2 ip-address (e.g. 192.168.1.71 and 192.168.1.72). PC available in LAN by ip-addreses, but not avail by hostname. 2. VM's has own ip-addr on each (e.g. 192.168.1.73, *74, *75 etc). They are available from LAN by their ip's, BUT not by their hostnames. How can I access to PC and to VM's by hostname?

    Read the article

  • High availability virtual machines

    - by Jeremy
    I've been reading a lot about high availability virtualization, either via Hyper-V or VMWare. In that context, essentially high availabliity means that the VM is hosted by a closter of physical servers (nodes), so if one of the physical servers goes down, the VM can still be served by other physical servers. So far so good, the physical cluster and the VM itself are highly available. However if the service being provided, let's say SQL server, MSDTC, or any other service, are actually being provided by the VM image and the virtualized operating system. So I imagine that there is still a point of failure at the virtual layer that isn't accounted for. Something could happen within the virtual machine itself that the physican cluster can not account for, correct? In that instance the physican failover cluster (Hyper-V) or VMWare host, can not fail over, because the issue is not with one of the servers in the physical cluster - failing over a physical node would not do any good. Does this necessitate building a virtual failover cluster on top of the physical one, or is this not necessary? Alternatively, I suppose you could skip the phsyical clustering, and just cluster at the virtual layer (Child based failover clustering), because that should still survive a physical failure. See image below showing parent based (left), child based (right) and a combination (center). Is parent based as far as you need to go, or is child based more appropriate?

    Read the article

  • Datastage 8.7 installs fine on Window7 without any errors but it can not launch localhost:9080 web console

    - by user265273
    When I launch the web console, I get page can not be displayed error. What I have tried so far: I have re-installed DS about 7 times, and each time, I get same errors. I added entries in etc/hosts file for local host and my host name. I have turned off firewall. My hardware/software setup. My host system is window8.1. My vmware workstation is 7. The guest os is windows 7 enterprise x64. I have installed 10g, and given dba role to public. I have installed VS 5, and ms visual c++ 2010 express. I have installed msxml. IE version is 10. Firewall is off. My internet works fine It passed all the DS requirement tests and install completed successfully. When I launch my vmware guest instance, I do get SQL5000c error upon boot which I have tried to ignore in some installs and in some, I used db2systray -clean command to get rid of it. But that has not helped solve the webconsole connect failure to my host. I have spent over 2 weeks exclusively on this issue and badly need some help.

    Read the article

  • Running Windows 7 physical disk virtualized under Linux

    - by CajunLuke
    I have an existing Windows 7 installation that I'd like to virtualize under Linux. Windows boots fine on Disk A, Linux boots fine on Disk B. (Both disks are SATA.) I can mount the Windows disk when in Linux. I've tried VirtualBox and VMWare Player and neither will allow me to boot from the other disk. VirtualBox doesn't seem to have the option to do so. VMWare Player has the option to have an IDE drive exposed to the virtual environment as a SCSI disk. I've tried that, but it throws the error "Cannot connect virtual device ide1:0 because no corresponding device is available on the host." I've verified that it's pointing to the correct hard drive. I'm willing to try other virtualization products, and I'm not averse to spending a little money to get this to work. I've seen this other question, and it's not a duplicate, as I haven't gotten that far yet. I'm also interested in solutions going the other way (Linux on Windows), but that'd be lagniappe. Gory Hardware Details: Lenovo T410, 2.4 GHz Core i5 (has virtualization extensions), 4GiB RAM, 2x 320 GiB SATA HDD, one in optical bay. Fedora 14 2.6.35.10-74.fc14.x86_64, Windows 7 32-bit.

    Read the article

  • moving from WinXP to WinServer in VmWare

    - by Alex
    I have a Vmware machine for.Net application testing. Current setup: Host OS: win7 Guest OS: Right now the guest OS is Win Xp Pro x64, which runs great with just 1 gigabyte of RAM and 10 gigs of disk space. * This part can be skipped * As I said, there was a program that I needed to test, but unfortunately, by default, Vmware installs crappy display drivers(called SVGA II) on XP machines and there is NO way to upgrade them! This resulted in my program's error (the program used SlimDX (DirectX wrapper) to do some stuff..). Eventually I found out that display drivers most certainly is the problem. For example, Windows 7 virtual machine uses SVGA 3D drivers and I have NO problems running my SlimDX-based program. Now, regarding Windows Server 2008! Apparently, WDDM driver is supported by WS2008, which means that I'll be able to install SVGA 3D and to test my DX apps. * end of skip * The questions are: Will WS2008 be as smooth with just 1 gig of RAM just like Win XP was? Will 10 gigs of HDD be enough? Or the server requires more? Will I be able to install .Net ver. 4 on WS2008? Are there any limitations that I need to be aware of as a .Net programmer? EDIT: I was hoping that WS2008 is XP-based, not Vista-vased/W7-based. In comparison, W7 virtual machine with 2 gigs of RAM and 2 proc cores nearly kills my Host OS. Whereas, WinXp runs extremely fast even with 1 core and 1 gig of RAM. That's the main reason why I want to try WS2008..

    Read the article

  • How do I fix my VM's network connection if it seems to be running ok from the host?

    - by AndreiC
    I have a virtual machine (made with vmware) with a linux ubuntu os installed on it (i have a series of them), with NAT network connection - i am running vmware on Windows XP (my host system); the virtual machine can't connect to the internet. All the vmware services seem to be working fine from windows point of view, but inside the machine i can't connect to the internet. What is strange is that the virtual machine was able to use the internet some time ago, but all of a sudden, i just can't use my internet on the virtual machine - i have made no changes to the settings, nor in windows, nor in the virtual machine - so i don't understand.

    Read the article

  • Windows cannot determine which language to install ?

    - by Mohammad
    I'm gonna install Windows Server 2008 SP2 on VMware Workstation 7.0.1 build-227600. But in installation I receive the following error and Windows doesn't continue installing procedure. Windows cannot determine which language to install ? What's wrong with it? Could you please guide me? Thanks.

    Read the article

  • Ubuntu 10.04: an error occurred while mounting /mnt/hgfs

    - by Patrick
    hi, I'm emulating Ubuntu using VMWare and I've upgraded it to last stable 10.04 version. When I boot the system I get this error (below the Ubuntu logo): "an error occurred while mounting /mnt/hgfs" I made a screenshot: http://dl.dropbox.com/u/72686/mountError.png So I have to click S to continue and the the OS seems to work well. Thanks

    Read the article

  • EMC ESRS stops working when it is VMotioned

    - by makerofthings7
    EMC is on site and told me: The ESRS SAN monitoring solution will cease to function if that host is VMotioned In case anyone doesn't know, the ESRS is a dial home solution that works over IP. An EMC SecureID is required to add or modify the list of devices that are monitored. The ESRS software is installed on the customer premises. Question If ESRS truly fails to work, as the EMC engineer stated, and based on our customer experience, what is it within VMWare that is exposed to the virtualized host that allows this behavior to happen?

    Read the article

  • Eject disk on Mac Pro running VMWare ESXi

    - by DougN
    I'm almost embarrassed to ask this, but I'm stuck. I installed VMWare ESXi on a Mac Pro. It's working great! The problem is that you press F12 to eject the disk, and F12 is what you use to shutdown ESX. I can power down, open the case, pull out the CD drive and use a paper clip to force the drawer open, but that's kind of a pain. Any other way to do this?

    Read the article

  • Can't access server running CentOS 6.3 in vmware

    - by localhost
    I just installed CentOS on a vmware machine that uses a bridged connection, installed apache, php and mysql, but when I run service httpd start I get a warning(?): Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using localhost.localdomain for ServerName I can connect to the server using putty, so I really have no idea why it won't load in the browser. EDIT: Httpd starts successfully, return [ OK ]. Running netstat -tuplen | grep :80 yields: tcp 0 0 :::80 :::* LISTEN 0 40392 15894/httpd I am able to connect with putty to 192.168.0.113, but browser says can't connect to 192.168.0.113

    Read the article

  • How to access VMWare localhost from my mac?

    - by Abe Miessler
    I have developed a asp.net application on my VMWare virtual machine that I can access (on my VM) by going to http://localhost:1044 How can I access this from safari on my Mac that is running the VM? I tried running ipconfig on my VM and then using the IP address that was given for "Ethernet adapter Local Area Connection", something like this: http://192.168.179.139:1044/ but this throws a not found error. I am currently using NAT. How can I get to localhost on my VM from my mac?

    Read the article

  • No network connectivity for my CentOS 6 installed in VMWare Fusion in MacOSX Lion

    - by gilzero
    I installed CentOS 6.2 (CentOS-6.2-x86_64-minimal.iso) with VMWare Fusion(Version 4.1.2). (Not with EasyInstall). I am using MacOSX Lion, connect to internet via WIFI. The centos installed does not have network connectivity. *How may I configure it to connect to wifi? * Thanks for any help. Below is screenshot of ifconfig: With the setting Network Adapter, I tried both NAT and Bridged WiFi.

    Read the article

  • use ubuntu server 10.4 as a virtulization server as esx from VMWare

    - by hitham
    i was wondering if its possible to use Ubuntu server as virtualization center as esxi vmware i am asking this coz i read this in ubuntu website: " Ubuntu includes a Virtual Machine Builder which makes this process simple and replicable allowing multiple pre-configured machines to be deployed instantly ". if its possible how can i do such thing ?. with all respect . Hitham Melhem

    Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >