Search Results

Search found 15621 results on 625 pages for 'creating'.

Page 440/625 | < Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >

• Installing Ubuntu 12.04 on NUC intel i3 DC3217IYE

  - by Kieron

  System: NUC i3, 2 hdmi ports, ethernet, no wireless. UEFI boot 2x2gb ram 30gb mSATA internal drive Ubuntu 64bit 12.04.03 Hello i am having much trouble loading an OS on my NUC. I started out attempting another OS with various loaders (beast/hack) without much success,(various panics on boot or endless reboot loops, or graphics failures) after many tries i decided to attempt Ubuntu. Many years ago i loaded Ubuntu on an e-machine without an issue so i figured it would go smoothly, nothing could be further from the truth. The Live USB stick loads, but when i am installing the OS it always fails to load grub 2. Obviously it wont boot from SSD without grub2. I searched and found that Boot-repair should fix it...so i created a live usb with boot repair...it refuses to repair the grub because the install never finished and the needed partions are not fully created and flagged. It also demands an internet connection which i am unable to provide. I then ran gparted in an attempt to create the needed partitions manually, then re-ran boot repair turning off the "check internet" option. and disabling the re-install grub hoping it would create the missing directories and or fix the flags. it appeared to run successfully but upon return to the Ubuntu live USB it still fails at the grub2 install. also gparted doesnt have the same choices that Ubuntu install has when creating partitions, causing it to not recognize that i already had a root, or an EFI directory or it sometimes couldnt tell what the format of the partition was...all very annoying the reason i cant connect to internet (and cant upload the error logs) is the nuc only has Ethernet and the location i have to set up is too far away from modem. i can not move the monitor closer to modem as it is a 50inch LCD. I just want to do a basic install with one user acct and remote desktop (vnc) turned on so i can move the NUC to the modem connect via ethernet and then finish setting it up via Remote desktop/VNC chicken from my mac. While i await any assistance you maybe able to provide i am going to attempt to switch to the 32bit version and legacy boot to see if that can load grub. thnx again to anyone that can come up with a possible solution. i would love to hit "erase and install ubuntu" if anyone can figure out what is stopping that simple answer from working. Also disks (CD/DVD) are not an option as neither my Mac mini or my NUC have optical drives, and i have no desire to buy one for one task

  Read the article

• apt-get install is not able to access /etc

  - by HorusKol

  I put together an ubuntu 12.04 server a couple of weeks ago and everything seemed fine until this morning. Suddenly, I'm having trouble installing new packages - at first I thought there was something wrong with tinyproxy and so I tried installing squid instead. However, I get similar results: Starting tinyproxy: tinyproxy: Could not open config file "/etc/tinyproxy.conf".\ ... /var/lib/dpkg/info/squid3.postinst: 1: /var/lib/dpkg/info/squid3.postinst: cannot open /etc/squid3/squid.conf: No such file It seems that apt-get is not creating the configuration files needed for these programs. I haven't modified any configuration or user groups since the last successful update/install of packages. /etc is present, and is populated with a nice healthy tree of configuration files. It is owned and grouped to root, and has the properties drwxr-xr-x - all the files and folders inside seem to be fine to, as far as I can tell. I've even been able to edit/save a couple as sudo. Full output from installing tinyproxy: Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: tinyproxy 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/61.6 kB of archives. After this operation, 201 kB of additional disk space will be used. Selecting previously unselected package tinyproxy. (Reading database ... 58916 files and directories currently installed.) Unpacking tinyproxy (from .../tinyproxy_1.8.3-1_amd64.deb) ... Processing triggers for ureadahead ... Processing triggers for man-db ... Setting up tinyproxy (1.8.3-1) ... Starting tinyproxy: tinyproxy: Could not open config file "/etc/tinyproxy.conf". invoke-rc.d: initscript tinyproxy, action "start" failed. dpkg: error processing tinyproxy (--configure): subprocess installed post-installation script returned error exit status 70 Errors were encountered while processing: tinyproxy E: Sub-process /usr/bin/dpkg returned an error code (1) Result of strace after installation: 18467 open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 18467 open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 18467 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\30\2\0\0\0\0\0"..., 832) = 832 18467 open("/etc/tinyproxy.conf", O_RDONLY) = -1 ENOENT (No such file or directory)

  Read the article

• SQL SERVER – How to easily work with Database Diagrams

  - by Pinal Dave

  Databases are very widely used in the modern world. Regardless of the complexity of a database, each one requires in depth designing. To practice along please Download dbForge Studio now.  The right methodology of designing a database is based on the foundations of data normalization, according to which we should first define database’s key elements – entities. Afterwards the attributes of entities and relations between them are determined. There is a strong opinion that the process of database designing should start with a pencil and a blank sheet of paper. This might look old-fashioned nowadays, because SQL Server provides a much wider functionality for designing databases – Database Diagrams. When using SSMS for working with Database Diagrams I realized two things – on the one hand, visualization of a scheme allows designing a database more efficiently; on the other – when it came to creating a big scheme, some difficulties occurred when designing with SSMS. The alternatives haven’t taken long to wait and dbForge Studio for SQL Server is one of them. Its functions offer more advantages for working with Database Diagrams. For example, unlike SSMS, dbForge Studio supports an opportunity to drag-and-drop several tables at once from the Database Explorer. This is my opinion but personally I find this option very useful. Another great thing is that a diagram can be saved as both a graphic file and a special XML file, which in case of identical environment can be easily opened on the other server for continuing the work. During working with dbForge Studio it turned out that it offers a wide set of elements to operate with on the diagram. Noteworthy among such elements are containers which allow aggregating diagram objects into thematic groups. Moreover, you can even place an image directly on the diagram if the scheme design is based on a standard template. Each of the development environments has a different approach to storing a diagram (for example, SSMS stores them on a server-side, whereas dbForge Studio – in a local file). I haven’t found yet an ability to convert existing diagrams from SSMS to dbForge Studio. However I hope Devart developers will implement this feature in one of the following releases. All in all, editing Database Diagrams through dbForge Studio was a nice experience and allowed speeding-up the common database designing tasks. Download dbForge Studio now. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL

  Read the article

• How to develop "Client script library" for ASP.net controls and how do these work?

  - by Niranjan Kala

  I have been working on .Net platform for 2 years and right now I am working on DevExpress controls for 6 months. All these control have client-side Events which are under some ClientScript nameSpace of particular control, Which specify ClientInstanceName, methods and properties accessible at client side. For example Button1 is ClientInstanceName and Button1.Text is a property, with methods like these: Button1.SetValue(); Button1.GetValue(); In ASP.Net Controls, buttons have the ClientClick event that fires before the Server Side Click event. I have inspected and goggled to extend client side functionality in asp.net controls. For example: create a ClientInstanceName property for controls or CheckedChanged event for CheckBox / RadioButton control. I have tried using these MSDN articles: Injecting Client-Side Script from an ASP.NET Server Control Working with Client-Side Script I got much information and ideas from these articles on how to implement/extend these. All are working in the client side. protected override void AddAttributesToRender(HtmlTextWriter writer) { base.AddAttributesToRender(writer); string script = @"return confirm(""%%POPUP_MESSAGE%%"");"; script = script.Replace("%%POPUP_MESSAGE%%", this.PopupMessage.Replace("\"", "\\\"")); writer.AddAttribute(HtmlTextWriterAttribute.Onclick, script); } Here It is just setting up attribute to the button. but all client side interaction no control from server. Here is that I want to know: How can I implement such functionality to create methods, properties etc. on client side. For example I am creating a PopControl as in the above code snippet same behavior as like Ajax ModalPopupExtender That have OK Button related properties. Ajax Controls can be directed to perform work from server side code e.g. Popup1.show(); How can I do this with such client enabled controls implemented controls as windows do? I am learning creation of Ajax Controls but I do not want to use ScriptManager or depend on another control. Just some extension to standard controls. I am expecting for ideas and implementation methods for such functionality.

  Read the article

• Announcement: Employee Info Starter Kit (v6.0–ASP.NET MVC Edition) is Released

  - by Mohammad Ashraful Alam

  Originally posted on: http://geekswithblogs.net/joycsharp/archive/2013/06/16/announcement-employee-info-starter-kit-v6.0asp.net-mvc-edition-is-released.aspxAfter a long wait, the next version of Employee Info Starter Kit is released! This starter kit is basically a project template that contains code samples targeting a specific technology, such as ASP.NET Web Form, ASP.NET MVC etc. Since its first release, this open source project gained a huge popularity in the developer community and had 250K+ combined downloads. This starter kit is honored to be placed at the official ASP.NET site, along with other asp.net starter kits, which all are being considered as the “best” ASP.NET coding standards, recommended by Microsoft. EISK is showcased in Microsoft’s Channel 9’s Weekly Show, as well. The ASP.NET MVC Edition of the new version 6.0 bundles most of the greatest and successful platforms, frameworks and technologies together, to enable web developers to learn and build manageable and high performance web applications with rich user experience effectively and quickly. User End Specifications Creating a new employee record Read existing employee records Update an existing employee record Delete existing employee records Role based security model Key Technology Areas ASP.NET MVC 4 Entity Framework 4.3.1 Sql Server Compact Edition 4 Visual Studio 2012 QuickStart Guide Getting started with EISK 6.0 ASP.NET is pretty easy. Once you've Visual Studio 2012 installed, then just follow the steps as provided below: Download the EISK 6.0 MVC version. Extract the file. From the extracted folder, click the solution file "Eisk.MVC-VS2012.sln". Right click the "Eisk.MVC" project node and select "Select set as StartUp Project". Hit Ctrl+F5 and explore! Architectural Overview Overall architecture is based on Model-View-Controller pattern Support for desktop & mobile browsers. Usage of Domain Model, Repository and Unit of Work pattern from Domain Driven Development approach Usage of Data Annotations in model (entity) classes to centralize basic validation mechanism that facilitates DRY principle Usage of IValidatableObject interface in model (entity) classes that isolates custom business logic from application layer Usage of OOP inheritance and Value Object pattern in model (entity) classes that provides reusability in application architecture Usage of View Model, Editor Model pattern that provides mechanism for testable view rendering logic Several helper classes and extension methods to enable developers build application with reduced code If you want to learn more about it in details, just check the following links: Getting Started - Hands on Coding Walkthrough – Technology Stack - Design & Architecture Enjoy!

  Read the article

• XNA: Networking gone totally out of sync

  - by MesserChups

  I'm creating a multiplayer interface for a game in 2D some of my friends made, and I'm stuck with a huge latency or sync problem. I started by adapting my game to the msdn xna network tutorial and right now when I join a SystemLink network session (1 host on PC and 1 client on Xbox) I can move two players, everything is ok, but few minutes later the two machines start being totally out of synchronization. When I move one player it takes 10 or 20 seconds (increasing with TIME) to take effect on the second machine. I've tried to : Create a thread which calls NetworkSession.Update() continuously as suggested on this forum, didn't worked. Call the Send() method one frame on 10, and the receive() method at each frame, didn't worked either. I've cleaned my code, flushed all buffers at each call and switched the host and client but the problem still remain... I hope you have a solution because I'm running out of ideas... Thanks SendPackets() code : protected override void SendPackets() { if ((NetworkSessionState)m_networkSession.SessionState == NetworkSessionState.Playing) //Only while playing { //Write in the packet manager m_packetWriter.Write(m_packetManager.PacketToSend.ToArray(), 0, (int)m_packetManager.PacketToSend.Position); m_packetManager.ResetPacket(); //flush //Sends the packets to all remote gamers foreach (NetworkGamer l_netGamer in m_networkSession.RemoteGamers) { if (m_packetWriter.Length != 0) { FirstLocalNetGamer.SendData(m_packetWriter, SendDataOptions.None, l_netGamer); } } m_packetWriter.Flush();//m m_packetWriter.Seek(0, 0); } } ReceivePackets() code : public override void ReceivePackets() { base.ReceivePackets(); if ((NetworkSessionState)m_networkSession.SessionState == NetworkSessionState.Playing) //Only while playing { if (m_networkSession.LocalGamers.Count > 0) //Verify that there's at least one local gamer { foreach (LocalNetworkGamer l_localGamer in m_networkSession.LocalGamers) { //every LocalNetworkGamer must read to flush their stream // Keep reading while packets are available. NetworkGamer l_oldSender = null; while (l_localGamer.IsDataAvailable) { // Read a single packet, even if we are the host, we must read to clear the queue NetworkGamer l_newSender; l_localGamer.ReceiveData(m_packetReader, out l_newSender); if (l_newSender != l_oldSender) { if ((!l_newSender.IsLocal) && (l_localGamer == FirstLocalNetGamer)) { //Parsing PacketReader to MemoryStream m_packetManager.Receive(new MemoryStream(m_packetReader.ReadBytes(m_packetReader.Length))); } } l_oldSender = l_newSender; m_packetReader.BaseStream.Flush(); m_packetReader.BaseStream.Seek(0, SeekOrigin.Begin); } } m_packetManager.ParsePackets(); } } }

  Read the article

• Java Spotlight Episode 111: Bruno Souza @brjavaman and Fabiane Nardon @fabianenardonon StoryTroop @storytroop

  - by Roger Brinkley

  Interview with Bruno Souza and Fabiane Nardon on StoryTroop. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes News End of Puplic Updates for JDK 6 Bean Valdiation 1.1 public review approved Two key JSRs accepted in time for JavaEE7 Public_JCP EC_meeting_audio_and materials posted Devoxx UK and Devoxx France CFP open JPA 2.1 Schema Generation WebSocket, Java EE 7, and GlassFish Events Dec 3-5, jDays, Göteborg, Sweden Dec 4-6, JavaOne Latin America, Sao Paolo, Brazil Dec 14-15, IndicThreads, Pune, India JCP Spec Lead Call December on Developing a TCK JCP EC Face to Face Meeting, January 15-16, West Coast USA Feature InterviewBruno Souza is a Java Developer and Open Source Evangelist at Summa Technologies, and a Cloud Expert at ToolsCloud. Nurturing developer communities is a personal passion, and Bruno worked actively with Java, NetBeans, Open Solaris, OFBiz, and many other open source communities. As founder and coordinator of SouJava (The Java Users Society), one of the world's largest Java User Groups, Bruno leaded the expansion of the Java movement in Brazil. Founder of the Worldwide Java User Groups Community, Bruno helped the creation and organization of hundreds of JUGs worldwide. A Java Developer since the early days, Bruno participated in some of the largest Java projects in Brazil.Fabiane Nardon is a computer scientist who is passionate about creating software that will positively change the world we live in. She was the architect of the Brazilian Healthcare Information System, considered the largest JavaEE application in the world and winner of the 2005 Duke's Choice Award. She leaded several communities, including the JavaTools Community at java.net, where 800+ open source projects were born. She is a frequent speaker at conferences in Brazil and abroad, including JavaOne, OSCON, Jfokus, JustJava and more. She’s also the author of several technical articles and member of the program committee of several conferences as JavaOne, OSCON, TDC. She was chosen a Java Champion by Sun Microsystems as a recognition of her contribution to the Java ecosystem. Currently, she works as a tools expert at ToolsCloud and in companies she co-founded, where she is helping to shape new disruptive Internet based services.StoryTroop is a space where we combine multiple perspectives about a story. This creates an understanding of that story like never seen before. Pieces of a story are organized in time and space and anyone can add a different perspective.What’s Cool Geek Bike Ride at JavaOne LAD Devoxx UK (Mar 26, 27) and FR (Mar 27 - 29) CFP jFokus schedule is firming up Nashorn Blog 1,500 @JavaSpotlight Twitter followers

  Read the article

• WinAPI window taking 50% of CPU when idle

  - by henryprescott

  I'm currently working on a game that creates a window using WindowsAPI. However, at the moment the process is taking up 50% of my CPU. All I am doing is creating the window and looping using the code found below: int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nShowCmd) { MSG message = {0}; WNDCLASSEX wcl = {0}; wcl.cbSize = sizeof(wcl); wcl.style = CS_OWNDC | CS_HREDRAW | CS_VREDRAW; wcl.lpfnWndProc = WindowProc; wcl.cbClsExtra = 0; wcl.cbWndExtra = 0; wcl.hInstance = hInstance = hInstance; wcl.hIcon = LoadIcon(0, IDI_APPLICATION); wcl.hCursor = LoadCursor(0, IDC_ARROW); wcl.hbrBackground = 0; wcl.lpszMenuName = 0; wcl.lpszClassName = "GL2WindowClass"; wcl.hIconSm = 0; if (!RegisterClassEx(&wcl)) return 0; hWnd = CreateAppWindow(wcl, "Application"); if (hWnd) { if (Init()) { ShowWindow(hWnd, nShowCmd); UpdateWindow(hWnd); while (true) { while (PeekMessage(&message, 0, 0, 0, PM_REMOVE)) { if (message.message == WM_QUIT) break; TranslateMessage(&message); DispatchMessage(&message); } if (message.message == WM_QUIT) break; if (hasFocus) { elapsedTime = GetElapsedTimeInSeconds(); lastEarth += elapsedTime; lastUpdate += elapsedTime; lastFrame += elapsedTime; lastParticle += elapsedTime; if(lastUpdate >= (1.0f / 100.0f)) { Update(lastUpdate); lastUpdate = 0; } if(lastFrame >= (1.0f / 60.0f)) { UpdateFrameRate(lastFrame); lastFrame = 0; Render(); SwapBuffers(hDC); } if(lastEarth >= (1.0f / 10.0f)) { UpdateEarthAnimation(); lastEarth = 0; } if(lastParticle >= (1.0f / 30.0f)) { particleManager->rightBooster->Update(); particleManager->rightBoosterSmoke->Update(); particleManager->leftBooster->Update(); particleManager->leftBoosterSmoke->Update(); particleManager->breakUp->Update(); lastParticle = 0; } } else { WaitMessage(); } } } Cleanup(); UnregisterClass(wcl.lpszClassName, hInstance); } return static_cast<int>(message.wParam); } So even when I am not drawing anything when the window has focus it still takes up 50%. I don't understand how this is taking up so much system resources. Am I doing something wrong? Any help would be much appreciated, thank you!

  Read the article

• Sony VAIO is booting directly into Windows without showing grub

  - by Rohan Dhruva

  I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

  Read the article

• Monitoring Your Servers

  - by Grant Fritchey

  If you are the DBA in a large scale enterprise, you’re probably already monitoring your servers for up-time and performance. But if you work for a medium-sized business, a small shop, or even a one-man operation, chances are pretty good that you’re not doing that sort of monitoring. You know that you’re supposed to be doing it, but other things, more important at-the-moment things, keep getting in the way. After all, which is more important, some monitoring or backup testing?  Backup testing, of course. Monitoring is frequently one of those things that you do when can get around to it.  Well, as you can see at the right, I have your round tuit ready to go. What if I told you that you could get monitoring on your servers for up-time, job completion, performance, all the standard stuff? And what if I told you that you wouldn’t need to install and configure another server in your environment to get it done? And what if I told you that you’d be able to set up and customize your alerts so you could know if your server was offline or a drive was full? Almost nothing for you to do, and you’ll have a full-blown monitoring process. Sounds to good to be true doesn’t it? Well, it’s coming. We’re creating an online, remote, monitoring system here at Red Gate. You’ll be able to use our SQL Monitor tool (which you can see here, monitoring SQL Server Central in real time) to keep track of your systems, but without having to set up a server and a database for storing the information collected. Instead, we’re taking advantage of services available through the internet to enable collection and storage of this information remotely, off your systems. All you have to do is install a piece of software that will communicate between our service and your servers and you’ll be off and running. It’s that easy. Before you get too excited, let me break the news that this is the near future I’m talking about. We’re setting up the program and there’s a sign-up you can use to get in on the initial tests.

  Read the article

• Justification for learning/implementing newer Microsoft technologies

  - by Darren

  I work at a large healthcare organization as a mid-level software developer. I have over 10 years experience in the IT industry using Microsoft technologies (ASP.NET & SQL Server). When I go to conferences, code camps, .net user group meetings, I hear of all kinds of new tools and technologies: MVC, LINQ, Entity Framework, WCF Web Services, etc. I guess you could say I'm in my comfort zone using the same old stuff from asp.net 2.0. I use typed datasets for my data access layer. I use web forms and feature rich server controls with master pages. I know how to use plain old SQL and create queries in my typed datasets to get at data my applications need. Throughout my career, I'm always sensitive to not become obsolete with my skill set. What I currently use works fine and my development time is fast. But I'm concerned that if I were to be laid off, I would be asked in interviews how many MVC apps I've written. Or how I am with LINQ or WCF web services. I know that it doesn't matter how many conferences, books, or videos I watch on some new technology...I have to implement/use it or it simply won't sink in. Also, managers who interview don't care how much someone reads up on something, only real use and experience with a technology. I have a new project to write. I've gone to my manager and have asked for additional time for the project for learning/implementing technology I may not be familiar with. Our organization encourages its employees to "learn and grow" and to continue are education. But I always get resistance when I ask for more time to ramp up on something new to implement. My manager is asking for concrete business reasons for implementing these new technologies. I don't have business reasons. My reasons are because I don't want to become obsolete. I could say it would make the project more maintainable in the future by other developers since at some point people could stop using these older technologies, but that' about all I can think of. Does Linq/Entity Framework/MCV apps perform better? So much so that the customers (users in departments I'm creating this app for) need? I doubt it. I'm interested in you guy's thoughts on this. Do many of you have similar plights with trying to use newer upcoming technologies? I doubt I'm on the bleeding edge of technology, either. Are there "business reasons" that you would bring to light for using these technologies? Thanks in advance! Sorry for the long wall of text.

  Read the article

• Desktop Fun: Vacation and Travel Icon Packs

  - by Asian Angel

  Do you have an upcoming vacation, place that you would like to travel to, or a favorite destination that you have visited in the past? With an appropriate wallpaper you can help set the mood for your desktop with our Vacation and Travel Icon Packs collection. Note: To customize the icon setup on your Windows 7 & Vista systems see our article here. Using Windows XP? We have you covered here. Sneak Preview After seeing “Tiki Time! 1.0” set shown below we just could not resist putting together a nice sunset beach desktop as an example to share with you. That is definitely so relaxing to look at… Note: Wallpaper can be found here. Looking very nice close up… At the Beach *.ico format only Download Sea Shells *.ico format only Download Beach Icon Collection *.ico and .png format Download Tiki Time! 1.0 *.ico format only Download Underwater Icons *.ico format only Download Shutter Shades Icon Pack *.ico and .png format Download Life Saver *.ico format only Download Les 12 Maisons *.ico format only Download Back In Time *.ico format only Download Tourism *.ico and .png format Download The Lovely Bones *.ico format only Download Japanicons Pack *.ico and .png format, also has bonus wallpaper included! Here is what the included 1280*1024 wallpaper looks like. Download Ukrainian Motifs *.ico format only Download Las Vegas Icons *.ico format only Download Las Vegas 2 *.ico format only Download Be sure to visit our new Desktop Fun section for more customization goodness! Similar Articles Productive Geek Tips Desktop Fun: Video Game Icon PacksDesktop Fun: Sci-Fi Icons Packs Series 2Restore Missing Desktop Icons in Windows 7 or VistaAdd Home Directory Icon to the Desktop in Windows 7 or VistaQuick Help: Downloadable Show Desktop Icon for XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows

  Read the article

• Generating Report for NUnit

  - by thangchung

   All source codes for this post can be found at my github.Time ago, I received a request that people ask me how they can generate reports of the results of testing using NUnit? In fact, I may never do this. In the little world of my programming, I only care about the test results, red-green-refactoring, and that was it. When I got that question quite a bit unexpected, I knew that I could use NCover to generate reports, but reports of NCover too simple, it did not give us more details on the number of test cases, test methods, ... And I began to see about creating interesting report for NUnit.I was lucky to find an open source here. Its authors call it NUnit2Report, but one disadvantage is it only running on .NET 1.0. Indeed too old compared to the current version 4.0. And I try to download the preview, but I could not run. I had to open its source code and found that it uses XSLT to convert the output of NUnit results from XML to HTML. Nothing really special, because I also knew that after NUnit run output file extension is XML is created. Author only use this file to convert to HTML using XSLT. And I decided to convert it to. NET 4.0, because I will not have to code from scratch. Conversion work made me take some time, but was lucky that I finally have what I want. Thanks Gilles for the this OSS. I will send a mail to thank him for his efforts but put this out for the OSS. Now I will show people how to do it. I used the auto built NAnt and NUnit for running TestCase, and I use Selenium testing framework. After writing three TestCase using Selenium, I ran NUnit, and got the following results: There are 1 fail and 2s success. In the bin directory of this project will have the NUnit output file as shown below: Then I create a build file, and a bat file for easy running (can use PowerShell is here also.) Double click in the bat file to create a report like this:       Finally open the index.html file in the folder to view report. As everyone can see, it is the TestCase and divide very clearly, that I meet the requirements. This is really good. Once again I really thank NUnit2Report from Gilles. People can contact him via the mail address [email protected] or website  http://nunit2report.sourceforge.net. It really is useful to those who promised to QA. Hopefully this post will help anyone really interested in doing reports for NUnit.   

  Read the article

• Web 2.0 Solutions with Oracle WebCenter 11g &ndash; Book Review

  - by juan.ruiz

  Recently I obtained a copy of the book Web 2.0 Solutions with Oracle Web Center 11g from Packt Publishing, right away I noticed that one of the authors of this book is a good and long time colleague of  mine Plinio Arbizu, whom I have joined for different developer events in Latin America in the past. In this entry you will find my review of the book. Chapter 1: What's Oracle WebCenter? Provides you with basic knowledge to understand the pieces of WebCenter and the role that these pieces play in the overall Oracle Fusion Middleware strategy. Chapter 2 and 3: Will guide you through installation process and set up instructions, required to start developing Web2.0 applications. The screenshots are very helpful. Chapter 4: The chapter will guide you through a series of steps for creating a basic HelloWorld application that uses ADF/Webservices/WebCenter framework to understand the relevant pieces that are part of the architecture in large Web2.0 solutions for WebCenter. One caveat on this chapter is that the use HTML in combination with ADF Faces is not a recommended practice, because in some cases (not in this one) HTML code generated by the components can conflict with existent HTML code place on the same page... so be careful. Chapter 5: Describes the basics to understand the usage of ADF Faces Rich Client Components, with templates and ADF Business components. Chapter 6: This chapter explains how to encapsulate, deploy and consume ADF UIs as JSR 168 portlets in a declarative way Chapter 7: Explains some of the WebCenter services and the different ways that these services can be integrated within WebCenter applications. Chapter 8: Goes over how to include a series of  WebCenter services provided out-of-the-box within applications. This chapter presents a simple and clear way of how to include RSS feeds, search capabilities, tagging and discussions using practical samples that are easy to follow. Chapter 9: Presents an important component of Oracle WebCenter - the composer. Through the composer and Oracle Metadata Services the composer adds all the functionality to perform end-user personalizations, which is a very common user case when working with portals. The concept is self-explanatory when running over the practice developed in this chapter. Chapter 10: Provides an introduction to WebCenter spaces, explaining common concepts about installation, administration (role creation, group creation, etc) and through a sample, the readers can put everything in practice on their own environments. Summary: This book would provide the reader with a fast start to work with Oracle WebCenter 11g  and its different components. In my opinion the book targets the developer audience, rather than the Portal type of audience, or content generator. For the readers of this book I recommend that to better understand the concepts discussed, first you need to understand the basics on Oracle Application Development Framework. Believe me you can thank me later!

  Read the article

• Push back rectangle where collision happens

  - by Tifa

  I have a tile collision on a game I am creating but the problem is once a collision happens for example a collision happens in right side my sprite cant move to up and bottom :( thats because i set the speed to 0. I thinks its wrong. here is my code: int startX, startY, endX, endY; float pushx = 0,pushy = 0; // move player if(Gdx.input.isKeyPressed(Input.Keys.LEFT)){ dx=-1; currentWalk = leftWalk; } if(Gdx.input.isKeyPressed(Input.Keys.RIGHT)){ dx=1; currentWalk = rightWalk; } if(Gdx.input.isKeyPressed(Input.Keys.DOWN)){ dy=-1; currentWalk = downWalk; } if(Gdx.input.isKeyPressed(Input.Keys.UP)){ dy=1; currentWalk = upWalk; } sr.setProjectionMatrix(camera.combined); sr.begin(ShapeRenderer.ShapeType.Line); Rectangle koalaRect = rectPool.obtain(); koalaRect.set(player.getX(), player.getY(), pw, ph /2 ); float oldX = player.getX(), oldY = player.getY(); // THIS LINE WAS ADDED player.setXY(player.getX() + dx * Gdx.graphics.getDeltaTime() * 4f, player.getY() + dy * Gdx.graphics.getDeltaTime() * 4f); // THIS LINE WAS MOVED HERE FROM DOWN BELOW if(dx> 0) { startX = endX = (int)(player.getX() + pw); } else { startX = endX = (int)(player.getX() ); } startY = (int)(player.getY()); endY = (int)(player.getY() + ph); getTiles(startX, startY, endX, endY, tiles); for(Rectangle tile: tiles) { sr.rect(tile.x,tile.y,tile.getWidth(),tile.getHeight()); if(koalaRect.overlaps(tile)) { //dx = 0; player.setX(oldX); // THIS LINE CHANGED Gdx.app.log("x","hit " + player.getX() + " " + oldX); break; } } if(dy > 0) { startY = endY = (int)(player.getY() + ph ); } else { startY = endY = (int)(player.getY() ); } startX = (int)(player.getX()); endX = (int)(player.getX() + pw); getTiles(startX, startY, endX, endY, tiles); for(Rectangle tile: tiles) { if(koalaRect.overlaps(tile)) { //dy = 0; player.setY(oldY); // THIS LINE CHANGED //Gdx.app.log("y","hit" + player.getY() + " " + oldY); break; } } sr.rect(koalaRect.x,koalaRect.y,koalaRect.getWidth(),koalaRect.getHeight() / 2); sr.setColor(Color.GREEN); sr.end(); I want to push back the sprite when a collision happens but i have no idea how :D pls help

  Read the article

• Finding the Twins when Implementing Catmull-Clark subdivision using Half-Edge mesh [migrated]

  - by Ailurus

  Note: The description became a little longer than expected. Do you know a readable implementation of this algorithm using this mesh? Please let me know! I'm trying to implement Catmull-Clark subdivision using Matlab (because later on the results have to be compared with some other stuff already implemented in Matlab). First try was with a Vertex-Face mesh, the algorithm works but it is of course not very efficient (since you need neighbouring information for edges and faces). Therefore, I'm now using a Half-Edge mesh (info), see also the paper of Lutz Kettner. Wikipedia link to the idea behind Catmull-Clark SDV: Wiki. My problem lies in finding the Twin HalfEdges, I'm just not sure how to do this. Below I'm describing my thoughts on the implementation, trying to keep it concise. Half-Edge mesh (using indices to Vertices/HalfEdges/Faces): Vertex (x,y,z,Outgoing_HalfEdge) HalfEdge (HeadVertex (or TailVertex, which one should I use), Next, Face, Twin). Face (HalfEdge) To keep it simple for now, assume that every face is a quadrilateral. The actual mesh is a list of Vertices, HalfEdges and Faces. The new mesh will consist of NewVertices, NewHalfEdges and NewFaces, like this (note: Number_... is the number of ...): NumberNewVertices: Number_Faces + Number_HalfEdges/2 + Number_Vertices NumberNewHalfEdges: 4 * 4 * NumberFaces NumberNewfaces: 4 * NumberFaces Catmull-Clark: Find the FacePoint (centroid) of each Face: --> Just average the x,y,z values of the vertices, save as a NewVertex. Find the EdgePoint of each HalfEdge: --> To prevent duplicates (each HalfEdge has a Twin which would result in the same HalfEdge) --> Only calculate EdgePoints of the HalfEdge which has the lowest index of the Pair. Update old Vertices Ok, now all the new Vertices are calculated (however, their Outgoing_HalfEdge is still unknown). Next step to save the new HalfEdges and Faces. This is the part causing me problems! Loop through each old Face, there are 4 new Faces to be created (because of the quadrilateral assumption) First create the 4 new HalfEdges per New Face, starting at the FacePoint to the Edgepoint Next a new HalfEdge from the EdgePoint to an Updated Vertex Another new one from the Updated Vertex to the next EdgePoint Finally the fourth new HalfEdge from the EdgePoint back to the FacePoint. The HeadVertex of each new HalfEdge is known, the Next HalfEdge too. The Face is also known (since it is the new face you're creating!). Only the Twin HalfEdge is unknown, how should I know this? By the way, while looping through the Vertices of the new Face, assign the Outgoing_HalfEdge to the Vertices. This is probably the place to find out which HalfEdge is the Twin. Finally, after the 4 new HalfEdges are created, save the Face with the HalfVertex index the last newly created HalfVertex. I hope this is clear, if needed I can post my (obviously not-yet-finished) Matlab code.

  Read the article

• Is ASP.NET MVC completely (and exclusively) based on conventions?

  - by Mike Valeriano

  --TL;DR Is there a "Hello World!" ASP.NET MVC tutorial out there that doesn't rely on conventions and "stock" projects? Is it even possible to take advantage of the technology without reusing the default file structure, and start from a single "hello_world.asp" file or something (like in PHP)? Am I completely mistaken and I should be looking somewhere else, maybe this? I'm interested in the MVC framework, not Web Forms --Background I've played a bit with PHP in the past, just for fun, and now I'm back to it since web development became relevant for me once again. I'm no professional, but I try to gain as much knowledge and control over the technology I'm working with as possible. I'm using Visual Studio 2012 for C# - my "desktop" language of choice - and since I got the Professional Edition from Dreamspark, the Web Development Tools are available, including ASP.NET MVC 4. I won't touch Web Forms, but the MVC Framework got my attention because the MVC pattern is something I can really relate to, since it provides the control I want but... not quite. Learning PHP was easy - and right form the start I could just create a "hello_world.php" file and just do something like this for immediate results: <!-- file: hello_world.php --> <?php> echo "Hello World!"; <?> But I couldn't find a single ASP.NET (MVC) tutorial out there (I'll be sure to buy one of the upcoming MVC 4 books, only a month away or so) that would start like that. They all start with a sample project, building up knowledge from the basics and heavily using conventions as they go along. Which is fine, I suppose, but it's now the best way for me to learn things. Even the "Empty" project template for a new ASP.NET MVC 4 Application in VS2012 is not empty at all: several files and folders are created for you - much like a new C# desktop application project, but with C# I can in fact start from scratch, creating the project structure myself. It is not the case with PHP: I can choose from a plethora of different MVC frameworks I can just create my own framework I can just skip frameworks altogether, and toss random PHP along with my HTML on a single file and make it work I understand the framework needs to establish some rules, but what if I just want to create a single page website with some C# logic behind it? Do I really need to create a whole bloat of files and folders for the sake of convention? Also, please understand that I haven't gotten far on any of those tutorials mainly because of this reason, but, if that's the only way to do it, I'll go for it using one of the books I've mentioned before. This is my first contact with ASP.NET but from the few comparisons I've read, I believe I should stay the hell away from Web Forms. Thank you. (Please forgive the broken English - it is not my primary language.)

  Read the article

• Javascript Implementation Patterns for Server-side MVC Websites

  - by tmo256

  I'm looking for information on common patterns for initializing and executing Javascript page by page in a "traditional" server-side MVC website architecture. A few months ago, my development team began, but abandoned, a major re-architecture of our company's primary web app, including a full front-end redesign. In the process, there was some debate about the architecture of the Javascript in the current version of the site, and whether it fit into a clear, modern design pattern. Now I've returned to the process of overhauling the front end of this and several other MVC websites (Ruby on Rails and MVC.net) to implement a responsive framework (Bootstrap), and in the process will again need to review then revamp and update a lot of Javascript. These web applications are NOT single-page Javascript applications (in fact, we are ripping out a lot of Ajax) or designed to require a Javascript MVC pattern; these apps are basically brochure, catalog and administrative sites that follow a server-side MVC pattern. The vast majority of the Javascript required is behavioral, pre-built plugins (JQuery and Bootstrap, et al) that execute on specific DOM nodes. I'm going to give a very brief (as brief as I can be) run-down of the current architecture only in order to illustrate the scope and type of paradigm I'm talking about. Hopefully, it will help you understand the nature of the patterns I'm looking for, but I'm not looking for commentary on the specifics of this code. What I've done in the past is relatively straight-forward and easy to maintain, but, as mentioned above, some of the other developers don't like the current architecture. Currently, on document ready, I execute whatever global Javascript needs to occur on every page, and then call a page-specific init function to initialize node-specific functionality, retrieving the init method from a JS object. On each page load, something like this will happen: $(document).ready(function(){ $('header').menuAction(); App.pages.executePage('home','show'); //dynamic from framework request object }); And the main App javascript is like App = { usefulGlobalVar: 0, pages: { executePage: function(action, controller) { // if exists, App.pages[action][controller].init() }, home: { show: { init: function() { $('#tabs').tabs(); //et. al }, normalizeName: function() { // dom-specific utility function that // doesn't require a full-blown component/class/module } }, edit: ... }, user_profile: ... } } Any common features and functionality requiring modularization or compotentizing is done as needed with prototyping. For common implementation of plugins, I often extend JQuery, so I can easily initialize a plugin with the same options throughout the site. For example, $('[data-tabs]').myTabs() with this code in a utility javascript file: (function($) { $.fn.myTabs = function() { this.tabs( { //...common options }); }; }) Pointers to articles, books or other discussions would be most welcome. Again, I am looking for a site-wide implementation pattern, NOT a JS MVC framework or general how-tos on creating JS classes or components. Thanks for your help!

  Read the article

• Selectively Exposing Functionallity in .Net

  - by David V. Corbin

  Any developer should be aware of the principles of encapsulation, cross-tier isolation, and cross-functional separation of concerns. However, it seems the few take the time to consider the adage of "minimal yet complete"1 when developing the software. Consider the exposure of "business objects" to the user interface. Some common situations occur: Accessing a given element requires a compound set of calls that do not "make sense" to the User Interface. More information than absolutely required is exposed to the user interface It would be much cleaner if a custom interface was provided that exposed exactly (and only) the information that is required by the consumer. Achieving this using conventional techniques would require the creation (and maintenance!) of custom classes to filter and transpose the information into the ideal format. Determining the ROI on this approach can be very difficult to ascertain, and as a result it is often ignored completely. There is another approach, which is largely made practical by virtual of the Action and Func delegates. From a callers point of view, the following two samples can be used interchangeably:     interface ISomeInterface     {         void SampleMethod1(string param);         string SamepleMethod2(string param);     }       class ISomeInterface     {         public Action<string> SampleMethod1 {get; }         public Func<string,string> SamepleMethod2 {get; }     }   The capabilities this simple changes enable are significant (and remember it does not cange the syntax at the call site): The delegates can be initialized to directly call the proper method of any target class. The delegates can be dynamically updated based on the current state. The "interface" can NOT be cast to the concrete class (which often exposes more functionallity). This patterns By limiting the interface to the exact functionallity required, the reduced surface area will typically result in lower development, testing and maintenance costs. We are currently in the process of posting a project on CodePlex which illustrates this (and many other) techniques which have proven helpful in creating robust yet flexible solutions that are highly efficient2 and maintainable. This post will be updated as soon as the project is published. 1) Credit: Scott  Meyers, Effective C++, Addison-Wesley 1992 2) For those who read my previous post on performance it should be noted that the use of delegates is on the same order of magnitude (actually a tiny amount faster) as conventional interfaces.

  Read the article

• Interview with Koen Aben, Supply Chain Director of WE Fashion

  - by user801960

  We recently spoke to Koen Aben, the Supply Chain Director of WE Fashion, who gave us some insight into how Oracle supported the international fashion retailer through the completion of a large scale integration project across its 340 European stores. Koen explains the reasoning behind the project which was to create a common retail foundation and to integrate and align working processes to drive insight and enable continued growth. It is always good to hear from someone of Koen’s experience who can articulate the benefits of partnering with the right company for such an extensive project as this. Koen explains that a crucial element of such a project is to unify business applications into a common platform, adding that for successful growth, retailers really need to achieve enterprise-wide alignment. At the start of the three year project, WE Fashion’s application platform was fragmented impacting the company’s ability to support sustained growth. In light of this, WE Fashion invested in its processes, systems, teams and partnerships to build the needed retail foundation. Now after successfully completing the project, the basis is in place to ensure that growth is unimpeded. In the video, Koen Aben highlights some of the factors necessary for the success of the project as: Having an understanding that the process of creating a growth platform for a company is a long journey Accepting that during a lengthy project such as this, there will be high and low points experienced within the project team and the business, but that the relationship with your partners is crucial to the success of the project. Having the correct team in place will prove to be the “lynch –pin” of any successful project Oracle supported Koen and his team in implementing this project, and is recognised for the role it played during this development in partnership with the company. On his experience with working with the Oracle team, Koen points out that in the critical situations, Oracle was there to ensure that the right people were in place whenever needed and this was key to ensuring the project’s success. Since Oracle is one of the few providers that can offer an enterprise-wide retail platform, our best practice approach is key to connecting interactions throughout the business to enable insight and optimise operations. This is a great example of a large scale international retail project, where the true success of its completion is reflected in how proud the company is about what has been achieved, and the fact that results are already being seen.

  Read the article

• How much freedom should a programmer have in choosing a language and framework?

  - by Spencer

  I started working at a company that is primarily a C# oriented. We have a few people who like Java and JRuby, but a majority of programmers here like C#. I was hired because I have a lot of experience building web applications and because I lean towards newer technologies like JRuby on Rails or nodejs. I have recently started on a project building a web application with a focus on getting a lot of stuff done in a short amount of time. The software lead has dictated that I use mvc4 instead of rails. That might be OK, except I don't know mvc4, I don't know C# and I am the only one responsible for creating the web application server and front-end UI. Wouldn't it make sense to use a framework that I already know extremely well (Rails) instead of using mvc4? The two reasons behind the decision was that the tech lead doesn't know Jruby/rails and there would be no way to reuse the code. Counter arguments: He won't be contributing to the code and is frankly, not needed on this project. So, it doesn't really matter if he knows JRuby/rails or not. We actually can reuse the code since we have a lot of java apps that JRuby can pull code from and vice-versa. In fact, he has dedicated some resources to convert a Java library to C#, instead of just running the Java library on the JRuby on Rails app. All because he doesn't like Java or JRuby I have built many web applications, but using something unfamiliar is causing some spin-up and I am unable to build an awesome application in as short of a time that I'm used to. This would be fine, learning new technologies is important in this field. The problem is, for this project, we need to get a lot done in a short period of time. At what point should a developer be allowed to choose his tools? Is this dependent on the company? Does my company suck or is this considered normal? Do greener pastures exist? Am I looking at this the wrong way? Bonus: Should I just keep my head down and move along at a snails pace, or defy orders and go with what I know in order to make this project more successful? Edit: I had actually created a fully function rails application (on my own time) and showed it to the team and it did not seem to matter. I am currently porting it to mvc4 (slowly).

  Read the article

• "Shared Folders" Feature Is Not Working In VirtualBox

  - by Islam Hassan

  I have Ubuntu 11.10 as a host and another linux 2.6 distribution as a guest. When I try to setup guest additions, this error message appears Building the shared folder support module .. fail And because of that, when I run the following in terminal mount -t vboxsf shared /root/shared I get the following error message mount: unknown filesystem type 'vboxsf' Any syggestions please? EDIT Sorry, the mentioned error message isn't complete, this is it. Building the shared folder support module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) This is the content of vboxadd-install.log Uninstalling modules from DKMS Attempting to install using DKMS Creating symlink /var/lib/dkms/vboxguest/4.1.2/source -> /usr/src/vboxguest-4.1.2 DKMS: add Completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area.... make KERNELRELEASE=3.2.6 -C /lib/modules/3.2.6/build M=/var/lib/dkms/vboxguest/4.1.2/build..........................(bad exit status: 2) Error! Bad return status for module build on kernel: 3.2.6 (i686) Consult the make.log in the build directory /var/lib/dkms/vboxguest/4.1.2/build/ for more information. 0 0 ERROR: binary package for vboxguest: 4.1.2 not found Failed to install using DKMS, attempting to install without make KBUILD_VERBOSE=1 -C /lib/modules/3.2.6/build SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 modules test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo; \ echo " ERROR: Kernel configuration is invalid."; \ echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo; \ /bin/false) mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/* WARNING: Symbol version dump /usr/src/linux-source-3.2.6/Module.symvers is missing; modules will have no dependencies and modversions. Actually the log file is very large and it exceeds the 30000 characters limit. How can I upload the entire log file here?

  Read the article

• How do I reinstate my admin user privileges to global read/write

  - by Matt

  I am running Ubuntu 12.04 LTS. I only have the one user which I created when I installed Ubuntu. Everything has been fine - love it - until I updated a software package recently from the command line using sudo (not gksudo). I was having a little bother which did not make sense to me and in a fluff changed my user read/write privileges through the GUI (not even clear how I got there!). After restart I was stuck in a login loop - using the right login password but kept getting looped back to the login and could only login as Guest. I could still login with my user/password via ctrl + alt + f1 Eventually I was able to login again at start up. Not sure exactly what it was I changed that worked but it was one of/or a combination of installing latest security updates, changing login manager from LightDM to DGM and back again, removing the ICE/Xauthority and chown user. Current dilemma is my primary admin user privileges were read only. In the command line ls -ls /home/user returned this value: drwx------ 48 username username 20480 I have since changed this using sudo chmod 0755 /home/username (from my limited understanding 755 should return my user privileges to their original read/write glory). ls -ld /home/user currently shows my user privileges as: drwxr-xr-x 48 username username 20480 I still seem to have only read access permissions. I've been through lots of threads (and the help file) that talk about creating new users/groups permissions etc. but specific info on returning my existing global/admin/primary users privileges to what they were when I first created that user - baffling me. I feel this is something really simple I'm just not getting it. Please help! sudo mount /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /proc type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusect1 (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=07pe tmpfs55) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw, ,nosuid,nodev,size=5242880 none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/meng/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=meng) none on /tmp/guest-1R2Fi5 type tmpsf (rw,mode=700)

  Read the article

• SQL SERVER – What is SSAS Tabular Data model and Why to use it – Part 2

  - by Pinal Dave

  In my last article, I talked about the basics of tabular data model and why use it. Then I demonstrated step by step creation of a basic tabular model project. In this part I’m going to throw some light on how to create measures and analyses in excel. If you look at the tabular project closely, you will notice that we have not defined any measure yet. So, in the first step we will define the measure first.  Open the solution and select the column you want to define as a measure. Then, click on the summation icon on the toolbar. You will see the aggregated results at the bottom of that column. You have also other choices as well like average, min, max, count and distinct count. After creating the required measures, we need to analyze our data in excel. To do this, click on the excel icon in the upper left corner of the toolbar. This will open your analysis in excel. Notice the pivot table field list here. I have highlighted the measures that we created in the earlier step. Now, we can use these measures in our analysis Now, we have to put the required fields in their respective places as column labels, row labels, Values and Report filter for analysis. See below snapshot for details, it shows region wise sales on a yearly basis You can even apply filters on the above analysis by placing the slicer field in report filter. In our example, we will take an English product name as a filter. You can use the filter as depicted in the below snapshot. Optionally, you can also use the slider to filter data more interactively. Further to improve our analysis, we can insert pivot charts That’s all for this time, in my next post I’m going to show in detail about how to create hierarchies, perspectives, KPI’s  and many more features. Author: Namita Sharma, Senior Corporate Trainer at Koenig Solutions. Reference: Pinal Dave (http://blog.SQLAuthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SSAS

  Read the article

• Internships available in Oracle Netherlands - this summer

  - by jessica.ebbelaar

  I am Jannie Minnema, Director of Business Operations for Oracle in the Benelux. My career at Oracle started at Oracle Headquartes in San Francisco as a Project Manager, building Computer Based Training Products. After spending 3 years in Dubai, my husband and I moved to the USA as he wanted to study a MBA there. This move kick started my career as I was working in Silicon Valley during a time of great opportunity. After the USA, I fulfilled numerous roles at Oracle ranging from Project Management to Sales and Marketing. I currently work in the Netherlands were I am now Director of Business Operations for Oracle in the Benelux and a member of the Dutch Management Team. Business Operations advises the Benelux Management Team and focuses on topics such as Corporate Social Responsibility, Customer Satisfaction, Internal Communication, Internal training and effective usage of Sales Tools and Systems. We are currently also working on how best to introduce a “New way of Working”. The move to our new office building in 2011 aides in creating the right environment for this. Our goal is to continually improve the organisation. I enjoy working for Oracle because there is never a dull moment, and I am continuously challenged to improve. The environment that I work in changes constantly. Look at all the recent acquisitions; over 60 in the past 3 years! If you, as an Oracle employee, see something that can be done better, like a new service or tool, then combine it with some enthusiasm, motivate it further and the (Oracle) world changes! Internships This summer we have a number of Internships available, coordinated by the Business Operations team. We very much look forward to welcoming Students in our Dutch office. We look at it as an opportunity for both Oracle and the Interns to learn from each other. It will definitely result in both parties improving, growing and achieving results! We offer Internships related to Sales, Marketing and New Technology. You can find the assignments here. During the Internship you will experience what is like to work for an international and dynamic company, where we work and play hard. Our customers are major Dutch companies and our employees are professionals that compare working at Oracle with playing a Soccer World Cup final. We offer several Internships at the same time, so you will learn and share your experiences with a group of fellow students. If you have any questions related to this article feel free to contact [email protected].  You can find our job opportunities via http://campus.oracle.com

  Read the article

< Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >