Search Results

Search found 13895 results on 556 pages for 'options'.

Page 440/556 | < Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >

• Tunnell network requests with Windows 7

  - by mark

  I've Windows 7 64bit Pro client in a private LAN behind a Netgear wgr614v7 router. I've also a remote Debian server machine outside. I'd like to tunnel all (or specified ports/protocols) over this outside server, so when I'm on the Windows machine and I request serverfault.com it would not appear from the wgr614v7 public IP but from the server. But it's not only about HTTP traffic, it's basically about everything I'd like to: other TCP ports, even UDP, etc. It must be transparent to the application, e.g. they shouldn't be aware of this. All their requests just appear as being from the server and the tunnel between them takes care about the packets. I'm aware of e.g. Putty and forwarding individual ports or using it as a socks proxy, however not many applications to support this and the support in windows itself looks non-existent to me. I might add it should be something "reasonable" easy to set up. I've heard about PPTP but I'm unsure about it's security implications (by design). Should I go for VPN? There seem to be two common solutions for Linux (OpenSwan and StrongSwan), why would I pick the one over the other? I also fear that setting up a VPN might be quite complex, OTOH maybe it's the only sane way to do the things right? Or is OpenVPN sufficient? I'm seeking for open (source) solutions, what other options to I have or which direction should I head to?

  Read the article

• Will Windows repair my multi-boot when I format the 1st physical partition with boot sector?

  - by user2353806

  Due to historical reasons I got a laptop with Vista, Windows 7 and Windows Server 2008R2 partitions. (boot from external wasn´t that viable) Nothing (Windows Repair, bootrec /whateveroption) worked when I restored only the Windows 7 and WS2k8 with Acronis TrueImage. Don´t ask me through what idiotic error messages I went during repair tries. (Wrong Windows version,...) So I grudgingly restored all three - with the little additional excursion that I thought changing the active partition to the Windows 7 partition would move the boot sector and let me format the Vista part... Oh no. Seems too logical for MS. (Dunno what I changed, but today it will let me format!) So the real question is: Will formatting the Vista part trash things again beyond comprehension or will Windows Repair bring back the boot rec and remove Vista from the boot options? Or should I just erase all the files to avoid trashing the boot? Where will the boot rec be (after repair) when I format the Vista? On 1st or 2nd partition? And if I get drunk and install Windows 8.1 on the 1st, will anything work? ;-) Thanks

  Read the article

• Where is SQLite on Nokia N810? How to get?

  - by klausnrooster

  I need SQLite3 with the TCL interface for a simple command-line app I use on all my PCs and want to use on my new (to me) Nokia N810. But "find" does not find any SQLite on the Nokia N810. Several apps use it, supposedly, like the maps/gps (poi.db), and others. I got sudo gainroot before using find, tried with wildcards * and dot . No luck. I guess it's embedded in the apps that use it? The N810's app manager doesn't offer SQLite. Apt-get has it and then fails with error: "Unable to fetch some archives, ..." The "update" and "--fix-missing" options do not help. I don't really want to get scratchbox and compile SQLite and TCL extension for it from sources. I looked at README and it seems like it might be straightforward. However [1] it's not clear what scratchbox download I would need (there are dozens in the Index of /download/files/sbox-releases/hathor/deb/i386), [2] I've never compiled any C sources successfully before, [3] and the whole mess entails a lot of learning curve for what is a very small one-off personal project. http://www.gronmayer.com/ has a few (sqlite (v. 2.8.17-4), libsqlite0 (v. 2.8.17-4), and libsqlite0-dev (v. 2.8.17-4)) but they appear to part of some huge package, may or may not include the TCL interface, ... and no I don't want to port my tiny app to Python. Is there some option I've overlooked? Must I get scratchbox and compile for ARM myself? Thanks for your time.

  Read the article

• What apps can you only get on Mac and not Windows?

  - by ytk

  What apps do you absolutely have to use a Mac to run, and there are no decent Windows PC equivalent? This is not a religious war. Please be specific and practical It doesn't have to be a direct 1-2-1 comparison, but overall usefulness to the task I'll start off with a few: KeyNote -- the animations are quite cool and not available in PowerPoint iTune's photo sync -- on Windows it makes copy of all the photos you want to sync, effectively double the space taken up by your photos. On a Mac it's easier as long as you use iPhoto Keychain -- a centralized password manager tied to the OS. The benefit of this is you don't have to set a Master Password (like Firefox) which you need to enter when starting the browser. And it doesn't reveal your password (like Chrome, which makes no effort in hiding the password you have stored in Options) Time Machine -- 0-configuration backup in the background. Easy interface for restoring a file, or even just a contact in the address book. Text-to-speech -- works in any program, and sounds better than Windows computer voice Quick View -- press space bar to preview a file. Windows95 had quick view, but was removed.

  Read the article

• Windows Vista Context Menu>New... does not find entries

  - by Paul

  I was trying to remove a virus and foolishly did not backup registry keys I deleted because I (thought) I only deleted entries from the folders of programs I did not care about. However, I think I have done something wrong here: Now when I open a context menu (right click) in any location and hover over the "New..." option I don't get any options. It has a greyed out box saying "(Empty)". So far I have found out the the entries themselves are still there (using the locations provided here: Windows 7 - Add an item to 'new' context menu). I have also used a program recommended in that thread which also finds the entries intact and enabled. So it seems maybe I have deleted the entry which tells Vista where to look to find the files that can be created. How can I restore this so entries are shown again? I know system restore is an option but as I have said I did this when removing a (very stubborn) virus so that is the last resort.

  Read the article

• VMware ESX Linux Guest Customization

  - by andyh_ky

  Hello, I am interested in deploying several RHEL 4 Update 8 virtual machines for creation of a test environment. Here are the steps I am taking: In off hours, P2V/V2V the production machines and convert them to templates Deploy the virtual machines with a customization specification that changes hostname, IP address I am interested in how these processes are done and if there are any options for further customization. Are the machines brought on the network when they are powered on, before they are reconfigured? Is there a potential IP address conflict? Is there an option to run additional scripts which reside on the guest as a part of the reconfiguration? For example, restoring an Oracle Database. This is an option with Windows guests and sysprep, but I have been unable to locate anything showing a RHEL equivalent. I am dealing with a multi tier application. The main issue I am attempting to mitigate is that the application servers reference database servers by hostname and in tnsnames files. I am interested in scripting the reconfiguration of the application in the deployment so that the app/db servers are pointing to the test environment. I am OK with placing the 'cleanup' script on the source and executing it after the machine has been brought up. I am interested in the automation of the script's execution post clone/boot, as well as if there could be an IP address conflict. (cross posted to VMTN's ESX 4 community)

  Read the article

• Monitoring Between EC2 Regions

  - by ABrown

  I'm working on a small EC2 project that involves a handful of servers in two different regions (US East and EU West). My first task is to implement a Nagios monitoring solution. Monitoring within a region is simple - I just use the private domain names/IPs, but I'm a little unsure of the best way to handle monitoring the second region without setting up a second Nagios install. The environment is fairly static, so I'm not going to be scripting the configuration with the EC2 tools just yet. As I see it, I have two options. Two Nagios installations (which is over-kill for the small number of servers I'm dealing with). Pros: I don't have to alter the group permissions nor do I have to pay for the traffic, redundancy in the monitoring solution - I could monitor the Nagios servers. Cons: two installations to deal with and I'd need to run another server instance. Have the single installation monitor both regions. Pros: one installation to deal with. Cons: slightly reduced security - security group will have to have NRPE (5666) opened for one source IP and also paying for a small amount of bandwidth at the Internet rate for data transfer between the regions. I guess my question is - how have others handled this problem and what are your recommendations? Thanks!

  Read the article

• Configuring iptables rules for HAProxy and others

  - by MLister

  I have the following relevant settings for HAProxy: defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 500 contimeout 5s clitimeout 15s srvtimeout 15s frontend public bind *:80 option http-server-close option http-pretend-keepalive option forwardfor # ACLs ... I have three backends (including a Nginx server) configured in HAProxy, all listening on different ports of 127.0.0.1. And my iptables config is this: *filter # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT -i lo -d 127.0.0.0/8 -j REJECT # Accepts all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allows all outbound traffic # You can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allows HTTP and HTTPS connections from anywhere (the normal ports for websites) -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allows SSH connections # # THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE # -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT My questions are: Would the above iptables config work with the settings/options in my HAProxy config? I am also runnning a postgres and a redis server on the same machine, what settings do I need to adjust for these two to enable them work with iptables?

  Read the article

• OpenVPN / iptables restrict some access

  - by RitonLaJoie

  I want to create an openvpn service on a dedicated server I have, for some friends so that they are able to play online games faster. Is there an easy way to restrict which traffic I allow them with iptables ? It seems iptable is not very easy to maintain and we can easily get kicked out of our own server. Rebooting on a rescue mode every time I would get kicked out because of bad iptable rules would just be a pain. As far as I understand, the tun interface would be providing the access. Which kind of rule in iptables would I have to implement to restrict their access to only 1 ip ? Also, I don't want this vpn to be the default gateway for all the traffic. I guess I should go with the option of pushing a route to the clients so that they connect to the IP of the game server through the VPN and use their regular routes through their ISP for all the other traffic ? As a side not, it seems Openvpn AS is not very robust. Is there some other (commercial is ok) product that would give me the same administration options through a web interface ? Is Webmin the only other solution ? Thanks !

  Read the article

• Directories Throwing 404 Errors - Virtual Host Configuration and mod_rewrite

  - by nicorellius

  On my production server, things are fine: PHP extension removal and trailing slash rules are in place in my .htaccess file. But locally, this isn't working (well, partially, anyway). I'm running Apache2 with a virtual host for the site in question. I decided to not use the .htaccess file in this case and just add the rules to the httpd-vhosts.conf file instead, which, I've heard, if possible on your server, is a better way to go. The virtual host is working and the URL I use for my site is like this: devserver:9090 Here is my httpd-vhosts.conf file: NameVirtualHost *:9090 # for stuff other than this site <VirtualHost *:9090> ServerAdmin admin@localhost DocumentRoot "/opt/lampstack/apache2/htdocs" ServerName localhost </VirtualHost> # for site in question <VirtualHost *:9090> ServerAdmin admin@localhost DocumentRoot "/opt/lampstack/apache2/htdocs/devserver" ServerName devserver <Directory "/opt/lampstack/apache2/htdocs/devserver"> Options Indexes FollowSymLinks Includes AllowOverride None Order allow,deny Allow from all </Directory> <IfModule rewrite_module> RewriteEngine ON # remove PHP extension and add trailing slash # note - this doesn't work for directories, and throws 404 # TODO - fix so directories use index.php RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{THE_REQUEST} ^GET\ /[^?\s]+\.php RewriteRule (.*)\.php$ /$1/ [R=302,L] RewriteCond %{REQUEST_FILENAME} !-d RewriteRule (.*)/$ /$1.php [L] RewriteCond %{REQUEST_FILENAME}.php -f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule .*[^/]$ /$0/ [R=302,L] </IfModule> # error docs ErrorDocument 404 /errors/404.php </VirtualHost> The problem I'm facing is that when I go to directories on the site, I get a 404 error. So for example, this: devserver:9090/page.php goes to devserver:9090/page/ but going to a directory (that has an index.php): devserver:9090/dir/ throws 404 error page. If I type in devserver:9090/dir/index.php I get devserver:9090/dir/index/ and the contents I want appear... Can anyone help me with my rewrite rules?

  Read the article

• Mobile app for sysadmins with monitoring and fixing tools(SSH, ping, traceroute) [closed]

  - by Roman

  I present a start-up company which is working on a new mobile tool for system administrators. Our team has released first several versions of Server Auditor which is now just a SSH terminal with special UI approach for touch devices and got quite good feedbacks, e.g. iOS and Android. Now we are thinking about adding extra features to make Server Auditor a tool number one for all system administrators and would like to know your opinion. Main question would you use a tool like Server Auditor with extra features described below: Fast problem fixing - preloaded recipes/snippets, e.g. clean logs, restart a process, reboot etc. Secure user data synchronisation(IP/DNS name, connection options, keys, snippets) across all your devices iPhone and Android. Built-in tools like ping, traceroute, whois System status integration - you can observe information about the system in a friendly way, e.g CPU load, hard drive and RAM usage etc. Monitoring tool integration. Your servers are watched by our Nagios-like system in the cloud and you get notified by push-notifications/SMS. Similar products are Server Density, CopperEgg. If we start to implement features from 1 to 5 when you will be ready to start use it or even potentially pay for it? Can you see any issues that would prevent you from using this kind of system? Thank you a lot for your time, we kindly appreciate it. Looking forward to hear your opinion

  Read the article

• How to configure SVN server for my own project

  - by user1729952

  I work with a team on an Android project using Eclipse IDE, we need to use a version control and we need to access the repo remotely, I have no experience using or installing servers, a little experience using SVN on Windows, but I still have problems connecting to it remotely. I need to use no-ip.com to change my IP, however; I failed to make VisualSVN server to work with no-ip. What options do I have? The best thing is to get it work with Windows if not, I have another computer that is running Ubuntu 12.4.1, I have installed apache2svn on it trying to get it work, the svn is installed, I went through tutorials to configure accessing protocols, but I can't figure out how to access it remotely from another computer? Can someone tell me the steps I need to get this job done and I can do my search for each step? (Please explain each step as some keywords or phrases I may not be familiar with) EDIT: Also worth noting, that my company has a website hosted on a remote server, can we use it as a repo? and how? It's running Linux

  Read the article

• How to turn off the display in Windows 8 without locking or making computer go to sleep?

  - by darshshah

  How to turn of the display in Windows 8 without locking or making computer go to sleep ? The problem is that when I enable ‘Turn off display after x minutes’ feature from control panel, the device goes into sleep after ‘x’ minutes. It seems that both the options – turn off display/put computer to sleep are connected. It devices goes automatically to sleep mode as soon as the display is turned off. So, is there any method to turn off the display of the device without it going into sleep mode ? Someone wrote in the microsoft forum " The whole key to this problem seems to be the "Turn off the Display" setting. If you have that set to 5 minutes, 10 minutes, 15 minutes, etc...the computer will go to sleep one minute after you lock the screen. With this setting set to "Never", it doesn't do it. So something is wrong there." I want to turnoff the display but don't want to lock the device. Is that also possible ? Thanks

  Read the article

• What is a good replacement for StumbleUpon's Share feature?

  - by Mofoo

  I've been using Firefox + StumbleUpon's Share feature with my friends for years now. It is a perfect way of sharing links directly with your friends. You first need to be Following each other and then on the SU toolbar, you can "Share" with your list of friends. You can even include a personal message. The friend will receive a notification with # of pending shares in their toolbar (bold & red). They click the stumble button and it will navigate to the site plus show a yellow bar with your message. I literally use it daily. But then Chrome came along and beat the tar out of Firefox (and other browsers) in terms of usability and performance. But it doesn't (and never will according to Google) allow toolbars. StumbleUpon's solution in Chrome is a fake toolbar (html) that gets injected into the page you're viewing. It's buggy and performance is low. Overall it's not an acceptable solution. I'm looking for a replacement with something that is just as easy to send/receive links. I was thinking of Twitter DM's and using a bookmarklet, but I wanted to survey the collective for other options Thanks in advance for your input!

  Read the article

• How can I document and automate a system's configuration?

  - by Diomidis Spinellis

  Having a system's configuration represented by its current state is risky, inefficient, and opaque. At some point you may be left with an unsupported system and no upgrade path. Then configuring a new system compatible with the old is a process or trial and error. Furthermore, if at some point the system is damaged the only option is to go back to the most recent full backup, and try to remember what changes followed from that point. Also, the only way to create a system compatible with the original is through a complete dump/restore. Finally, in such a setup there's no way to know how you solved a particular problem; the only thing you can do is to look at the corresponding configuration files and try to guess what you changed to achieve the desired effect. Currently for each system I maintain, I keep a log file where I record all system administration activity, starting from the installation: installation options, added packages, changes in configuration files, updates, problem fixes etc. In theory this allows me to (manually) replay all changes to arrive at the current state, or to unroll an erroneous change by executing the reverse commands. However, this process is also inefficient, error-prone, and relies on human judgment. Another thing I've tried is to put /etc configuration files under version control with git. This helps me document the changes automatically and also apply them on a clean setup. But it's not without problems: git has to run under sudo, passwords and private keys may be stored in the repository, installed packages can't be meaningfully tracked, and git will have a fit if I try to extend this approach to all the system's directories. I've also thought about performing all changes through shell scripts or makefiles, but I think this process will require a lot of effort and will be fragile. Are there some better methods or tools that I'm missing?

  Read the article

• How can I extend / create a new partition from the following setup?

  - by Kiada

  I'm a little unsure what to do in this situation. When I try to create a new simple volume from the unallocated space I get an error because I already have 4 partitions. I have no option to extend either my C:\ primary partition or the E:\ logical drive. C:\ - Gaming Win7 install. D:\ - Storage Unallocated Space - Would somehow like to install OSX on a partition from this space. E:\ - Software Development Win7 install. I:\ - Ignore this. It's an external 1TB HDD. Do I have any options that do not involve formatting / losing information on either C:\ or E:\? Thank you. Link to visual disk partitioning setup image. Edit: A bit more information regarding partitions. Firstly, the image linked above is a screenshot of Windows 7 partitioning tool, easier to read than text I guess! H:\ System Reserved: 100MB NTFS C:\ 244 GB NTFS Healthy (Page File, Primary Partition) D:\ 294 GB NTFS Healthy (Primary Partition) E:\ 100 GB NTFS Healthy (Boot, Page File, Crash Dump, Logical Drive) Unallocated 292 GB Hope this helps :)

  Read the article

• Two video card on one Mobo

  - by InfinityKing

  I recently purchased a new HP Pavilion p6-2265eo. It was then that I realised that it has only one DVI and one HDMI output.. I will connect my TV with the HDMI. so I am letft with only one DVI output. I need to have two monitors. Please help. Should I purchase a new video card and install it? My knowledge is limited. The specifications of my comp says that there is 1 x PCI-E x16, 3 x PCI-E x1. 1) I suppose that the video card already present in my purchase is connected on the PCI-E x16. Am I right? I dont want to open my desktop right now and check it for myself as it can void the warrenty. so I need an experienced person to tell me that. 2) I have an old nvidia geforce 7200 gt. Is it possible for me to connect it to my left over PCI-E x1? I searched for PCI-E x1 on the net and as far as I can understand the slot is too small for my old nvidia geforce 7200 gt graphic card. 3) what are the options? Please help this dummo :) Thankign you in advance,

  Read the article

• Debian boot problems

  - by psp

  I've got Debian server with one disk. No dual boot or anything fancy. Just Debian 6.0 (Squeeze). I rebooted the server today and now it doesn't boot. I get the following (from GRUB): error: hd0,msdos out of disk I then get a grub prompt grub rescue> I've been googling for ages with no luck. /etc/fstab > #/etc/fstab: static file system information. > # > # <file system> <mount point> <type> <options> <dump> <pass> > aufs / aufs rw 0 0 > tmpfs /tmp tmpfs nosuid,nodev 0 0 I've run debian rescue mode and looked through the syslog. I see hundreds of entries like this: Jun 30 22:51:08 kernel: [ 615.217382] sd 2:0:0:0: [sda] Unhandled error code Jun 30 22:51:08 kernel: [ 615.217385] sd 2:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK Jun 30 22:51:08 kernel: [ 615.217389] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 30 22:51:08 kernel: [ 615.217399] end_request: I/O error, dev sda, logical block 0 Jun 30 22:51:08 kernel: [ 615.217402] Buffer I/O error on device sda, logical block 0

  Read the article

• Duplicate monitor on highest resolution in Windows 7

  - by AlexanderMP

  I have a monitor with a native resolution of 2560x1440, connected through display port. I also have an AV Receiver connected to the video card via HDMI, to have surround sound in games. All using Radeon HD 5670 (will upgrade soon to HD 7850). The problem is that my computer detects the receiver as a separate monitor, with the highest available resolution of 1920x1080. I have 3 options: Disconnect the second display. But then the sound (digital audio output through video card) also disappears. Duplicate displays. But then my primary monitor resolution is reduced to a maximum of just 1920x1080, that being the maximum of the second monitor. Extend desktop. This is the solution I picked so far, it being the least evil. The problems I face in this situations are 2: I have a blank part of the desktop where I sometimes lose my mouse pointer, so I made the extension small, 640x480, and placed it in a corner; when I turn off the main display, all windows resize to 640x480. In Kubuntu I had the option to duplicate the displays, while keeping the higher resolution. Which was great. I tried overriding using the Win7 netbook hack, but it's not available on non-netbooks. Is there a similar solution for this problem in Windows 7?

  Read the article

• cannot connect to my nginx server from remote machine

  - by margincall

  I thought that it's iptables problem.. but it seems not. I really have no idea about this situation. I'm getting a server hosting(CentOS). I installed Nginx + Django and nginx uses 8080 port. A domain is connected to the server. When I executed "wget [domain]:8080/[app name]/" in the server, it worked. Of course, "wget 127.0.0.1:8080/[app name]/" has no problem. (wget [server ip]:8080/[app name]/, either) However, from other computers, connecting was failed. (message says, no route) I checked my firewall setting. I excuted these commands. iptables -I INPUT -p tcp --dport 8080 -j ACCEPT iptables -I OUTPUT -p tcp --sport 8080 -j ACCEPT iptables -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT /etc/init.d/iptables restart I don't really understand all options of commands and I think there were useless commands, but I just tried all googled iptables settings. But still I cannot connect to my server. What should I check, first? I don't know this is important, but add to this post. On 80 port, an apache server is running. It works fine, I can connect to apache from other computers. There is DB connecting issue, (PHP to MySQL) but I think that it is just PHP coding bug. please excuse my low-level English. I'm not native English speaker.. but I tried to explane well as far as possible. Thank you for reading this question.

  Read the article

• Windows Server 2008 (x64): Wont boot past bios page

  - by WebSolProv

  Happy New Year, Since a month or so ago I inherited responsibility for small network administration for my sins. The domain controller (yes there is only one, and yes I know it is best practice to have two even in a small domain setup) went down overnight and I have been trying all day to get it back up and running. Unfortunately this machine also administers our entire ActiveDirectory setup: 1) It goes thru the BIOS without any errors, nothing whatsoever 2) It gets into the “select safe mode, safe mode with networking, normal” etc and if you select either of the safe mode options it loads a few files then reboots. If you select normal it just runs for a bit (doesn’t get to the windows splash screen) and then reboots again. 3) If you select windows repair, it asks for an image to repair too: however it would appear that none was taken that can be used (!!) or one is not being shown. 4) I have tried repairing the boot sector and the boot configuration using Bootrec.exe, both which it says were completed successfully but still it doesn’t work. 5) I have tried swapping the drives into another server to rule out hardware and that didn’t work either so clearly it’s the OS. 6) I have tried running chkdsk which ran fine, and also memory check which was also fine. We do have another machine on the network that was installed as a DC so when we decommission the current infrastructure but when I try and "promote" this to the lead DC then I get “you cannot modify domain or trust information because a PDC emulator cannot be contacted" so I am unable to replicare the ActiveDirectory details. If anyone can think of any direction I should follow it would be greatly appreciated, Thanks, Alex

  Read the article

• Best practice ACLs to prepare for auditors?

  - by Nic

  An auditor will be visiting our office soon, and they will require read-only access to our data. I have already created a domain user account and placed them into a group called "Auditors". We have a single fileserver (Windows Server 2008) with about ten shared folders. All of the shares are set up to allow full access to authenticated users, and access restrictions are implemented with NTFS ACL's. Most folders allow full access to the "Domain Users" group, but the auditor won't need to make any changes. It takes several hours to update NTFS ACL's since we have about one million files. Here are the options that I am currently considering. Create a "staff" group to assign read/write instead of "Domain Users" at the share level Create a "staff" group to assign read/write instead of "Domain Users" at the NTFS level Deny access to the "Auditors" group at the share level Deny access to the "Auditors" group at the NTFS level Accept the status quo and trust the auditor. I will probably need to configure similar users in the future, as some of our contractors require a domain account but shouldn't be able to modify our client data. Is there a best practice for this?

  Read the article

• Trouble Starting MySL Community Server on Windows 7

  - by CodeAngel

  I have installed Netbeans 7 on my Windows 7. In addition, the MySQL Community Server 5.6.12 is installed with the MSI installer on thesame 7 PC. The MySQL server is integrated with the Netbeans IDE. However , it is not possible to start or stop the MySQL server from the command prompt or the Netbeans IDE. I am only able to start or stop the server from the Windows 7 services tool. Also , it is difficult running SQL queries from the Netbeans IDE even though it shows there is connection with the MySQL server. I have added the my.ini file to the installed directory of the MySQL server , that is : C:\Program Files\MySQL\MySQL Server 5.6 below is the my.ini file : # For advice on how to change settings please see # http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html # *** DO NOT EDIT THIS FILE. It's a template which will be copied to the # *** default location during install, and will be replaced if you # *** upgrade to a newer version of MySQL. [mysqld] # Remove leading # and set to the amount of RAM for the most important data # cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%. # innodb_buffer_pool_size = 128M # Remove leading # to turn on a very important data integrity option: logging # changes to the binary log between backups. # log_bin # These are commonly set, remove the # and set as required. # basedir = ..... # datadir = ..... port = 3306 # server_id = ..... # Remove leading # to set options mainly useful for reporting servers. # The server defaults are faster for transactions and fast SELECTs. # Adjust sizes as needed, experiment to find the optimal values. # join_buffer_size = 128M # sort_buffer_size = 2M # read_rnd_buffer_size = 2M sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES Any suggestion is welcomed.

  Read the article

• Seeking faster access/transfer times for accounting application

  - by Markaway

  Our accounting software, Sage 50, has been getting slower to open on workstations and reading the company file. The company file only contains 2 years worth of transactions, and we just cleared out 2011 so the file size has gotten a lot smaller. There are 10 users, 6 of which are on it all day, 4 are on and off throughout the day. Our network is entirely GbE and the switches are set to prioritize traffic on that port number. Watching network traffic, we barely use 40% of the network capability on the workstation, so I don't think that is our bottleneck. Our server contains two older Raptors Sata 2(3GB/s) 150GB in RAID 1. We were considering switching to SSD's, but a lot of what I read says to stay away from MLC's, especially for production environment and definitely avoid putting them in a RAID config. So would upgrading to newer Raptors with SATA 3(6GB/s) offer noticable benefits? What other options are out there that aren't so expensive? Trying to keep it to 200-300 per drive. We need at least 150GB, but going to 250-300GB would be better as it gives us more room to grow. We have about 30% space remaining on what we have now.

  Read the article

• Can't login to Windows server 2008 (as any user, not even locally, not in safe mode but I have right credentials)

  - by Saix

  Just from nowhere I can't login to my Windows server 2008 machine. All the services like FTP server or webserver (which I'm actually not using, just remote desktop and FTP) are running. Whatever credentials I try (even/especialy administrator), it always says Unknown Username or bad password. I have already tried hard turn off/on and safe mode without luck. Also I already tried type in login name as SERVER NAME\user or Workgroup\user (every case sensitive scenario), still says I have wrong login. Usually we are using remote desktop to access the machine but local access over KVM doesn't work either. Now I'm lock out of any control or any way to do something. There's just logon screen preceding by ctrl+alt+del to login alert. Without me able to login I can't actually try to fix anything. Can't find much more on Internet except the SERVER NAME\user thing. Reinstall would be the last resort but I can't let things this way for much longer anyway. This server is vital. If it would be any help, I think automatic Windows updates are turned off and there were no updates or newly installed software for last couple years and just few soft restarts, non of them recently. It happened during it's runtime while all other services were still up and running, so this couldn't be just some Windows nasty screw up during boot or something. What could have possibly changed? What are my options now?

  Read the article

< Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >