Search Results

Search found 13909 results on 557 pages for 'old man'.

Page 441/557 | < Previous Page | 437 438 439 440 441 442 443 444 445 446 447 448  | Next Page >

• ESXi 5 Guests will not boot

  - by Adrian

  I have a problem with Guests not booting under VMWare ESXi 5.0 on my IBM x3550M3 server. Note: Investigation eventually determined that problem was with the VMware client on a Lenovo Edge laptop, the only Windows box available in a Linux IT shop. vSphere Client v4 and v5 duplicated behavior on the Lenovo Edge. As indicated in the comment to the accepted answer, replacing the workstation with one using different video was the "fix" for this particular issue. The ESXi host boots just fine. The Client connects just fine. Guests can be configured but do not successfully boot. The initial guest memory consumption jumps up to 560MB and drops down to 40MB after a few seconds. Initial CPU usage is 1 full CPU (3000Ghz per the chart) and immediately drops downm to 29Mhz. Guests do not display any output in the Console tab but show a state of 'Powered On'. No errors in the Events tab. Switching Guest from BIOS to EFI makes no difference. VMs are listed as Version 7 and the behavior is duplicated across all availabled Guest OS flavors. Problem also duplicated when server is booted up in Legacy Only mode. Logs do not contain anything particularly suspicious. Edit: No firewalls, routers, or VLANs in between the client and server. Edit 2: We have tried to Boot Guest into BIOS screen at Next Boot checkbox in the Guest Setting. Was not successful. Edit 3: 500GB datastore with 1 40GB VM on it. Plenty of space. Edit 4: Guests copied from my old ESXi 4 server DO NOT boot on the ESXi 5 system. Initially it complains about too little Video RAM being configured for the default 2500x1600, but it still doesn't work properly even after I bump the Video RAM settings or switch it to Auto-Detect.

  Read the article

• Can't access WordPress blog after host changed IP address of server

  - by John

  My host changed servers and all websites now have a new IP address. I have the same domain name and I assume the host runs the same nameservers, though my host and domain name provider are different. Notes: I never entered a Name or description under General/Settings for my blog. I left them both blank. That is when I could log into it. The wp-config file, has localhost entered rather than a specific IP. Again this has always been the case and my host never advised otherwise. I can get into cPanel by simply putting the newly advised IP in front of /Cpanel. However, I can not reach the admin panel of my WordPress blog (version 2.8.2). I had been loggin into it via http://xx.xx.xxx.xx/~example/blog/wp-login.php. My host suggested to simply insert the new IP in place of the old one. I still get the error message: 404 Not Found The server can not find the requested page: Apache/2.0.63 (Unix) mod_ssl/2.0.63 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 PHP/5.2.12 Server at 74.50.108.14 Port 80 I followed some tips on a question on Stack Overflow of a similar nature. I have logged into phpMyAdmin and found the wp-options table and searched for SELECT * FROM `wp_options` WHERE `option_name` IN ('siteurl', 'home') Only option ID 39 came up and the results are: Home has optionvalue http://example.org siteurl has optionvalue http://example.org/blog Both of which appear correct. Is there any part of the MySQL tables where I can change an actual IP address? Or is there something else you can advise?

  Read the article

• How to set TV-out options under Linux of an Geforce 9600 GT video card

  - by polemon

  I'm using the TV-out connector of my Geforce 9600 GT to connect it to an old TV set. It's obviously in Composite mode, the other two cables of Component video are dead, only Pb/VIDEO labeled one gives me a signal. The picture appears black/white on the TV, I presume it's because the video card gives me an NTSC signal, but it's a PAL tv set. How do I change the TV-out from NTSC to PAL? My Component to SCART adapter hasn't arrived yet, but I think I should be able to set manually, whether the signal should be Composite or Component. How do I switch modes of the TV-out, between Component and Composite? I'm running Linux, so it's probably some settings I need to make in xorg.conf. Edit: I got this far: I need to set in the "Device" section of my xorg.conf: Option "TVStandard" "PAL-B" Option "TVOutFormat" "COMPOSITE" The whole section looks like this now: Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9600 GT" Option "AddARGBGLXVisuals" "True" Option "TVStandard" "PAL-B" Option "TVOutFormat" "COMPOSITE" EndSection How can I list all available settings for "TVStandard" and "TVOutFormat"?

  Read the article

• Netgear router keeps disconnecting iPhone

  - by DisgruntledGoat

  My old router (Voyager 2091) packed up so I just got a new router - a Netgear N150 model DGN1000. My laptop connects OK wirelessly, but my iPhone 4S is constantly getting "disconnected" - it has perfect wifi signal and is seemingly connected to the router, but no pages load (it says "server cannot be found"). If I disconnect manually ("forget this network") then reconnect, it works fine again for a random amount of time (usually 10-30 minutes) then I get the same problem again. I've done some searching and this appears to be a known problem - there are dozens of forum posts out there lamenting similar connection problems. The only advice I have seen is to set a specific channel under Wireless Settings on the router CP, although every forum post recommends a different channel! 1, 3, 5, 6, 11... I have tried them all for hours at a time and get the exact same problem. The firmware is up to date. Is there an actual solution for this, or do I need to get a different router just to be able to use my iPhone?

  Read the article

• Ways to recover data from external hard drive

  - by Howard Benson

  I use an external hard disk for backup of my mac with time machine (OS 10.5.8). I have made something wrong and I have found important folders in the recycler bin. These folders come from external hd. They are backup folders (backups.backupdb) and others. I have tried to restore them draggin and dropping. Some of them came back in the external hd in a while. For the others it takes hours to "preparing to copy" and then it has said "there's no space to copy" on ext hd. It's strange. Files are now in the recycle bin (180gb), and the ext had should have lot of free space. But it isn't really so. Ext hd is not free of space even if these files are in the bin. I ask for advices. I'm not also able to use time machine now (and i have "lost" old backups) for the same reason. Ext hd says that it has not free space.. Thanks

  Read the article

• Windows Server 2008 - inexplicable system time jumps/glitches/inaccuracies

  - by Nathan Ridley

  I'm running a production web server on Windows Server 2008. On this server I have a database which logs certain user actions, but every now and again I inexplicably get database entries which, according to the record ID and the records immediately before and after, have the wrong time logged against them (7 days+ too old). For example, record ID 1001 will be for Dec 7, 11pm, 1002 will be for Dec 7, 11:01pm, then 1003 will be for Nov 28, 1:38am, then the next will be back on track again. The problem seems to occur in random records (or 2-3 records in a row) and crops up once every few days. This is absolutely baffling because there is only one place in the application that assigns this date/time value and it's simply the system UTC date. I have been synchronizing the system time to time-a.nist.gov (which I read in another article was a bit more reliable than the default time.windows.com) and it seems to occasionally get out of time anyway (3-4 minutes), but I'm speculating that occasionally the time server has a temporary glitch where the date changes to a drastically wrong value for a short space of time, then changes back. Either that, or the motherboard clock battery is screwed and the reason the time momentarily changes is that the motherboard loses the time and then the time synchronization puts it back again. Could either of my suspicions be right? Should I turn off time synchronization for a production server? Assigning dates to an event log where the dates are up to 2 weeks prior to the actual date is a severe problem I can't have when the next version of my application is released. Any suggestions or advice would be appreciated.

  Read the article

• Updated my WAMP Server and MySQL is eating up 580mB of memory

  - by Jon

  I updated my dev-box's WAMPSERVER, and along with updating PHP and Apache, MySQL updated to '5.6.12'. After doing that, I copied the data folder from my old (5.1.36) install to the new one and now MySQL takes up 580mB which is way too much, since I'm the only person using it (Locally) and there are only 20 or so databases on it, none of which have 'memory' tables. How can I get this down to a decent amount? My my.ini: # For advice on how to change settings please see # http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html # *** DO NOT EDIT THIS FILE. It's a template which will be copied to the # *** default location during install, and will be replaced if you # *** upgrade to a newer version of MySQL. [mysqld] # Remove leading # and set to the amount of RAM for the most important data # cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%. # innodb_buffer_pool_size = 128M # Remove leading # to turn on a very important data integrity option: logging # changes to the binary log between backups. # log_bin # These are commonly set, remove the # and set as required. # basedir = ..... # datadir = ..... # port = ..... # server_id = ..... # Remove leading # to set options mainly useful for reporting servers. # The server defaults are faster for transactions and fast SELECTs. # Adjust sizes as needed, experiment to find the optimal values. # join_buffer_size = 128M # sort_buffer_size = 2M # read_rnd_buffer_size = 2M sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES Database info: Storage Engine Data Size Index Size Total Size InnoDB 48.00 KB 0.00 B 48.00 KB MEMORY 0.00 B 0.00 B 0.00 B MyISAM 163.64 MB 122.49 MB 286.13 MB Total 163.69 MB 122.49 MB 286.18 MB

  Read the article

• Is a Hyperthreaded CPU more powerful and more efficient than a Dual-core CPU? [closed]

  - by user1811864

  which computer to choose with Pentium processor hello they are getting rid of the old computer equipment in the office and i have to choose the computer to take home i get first choice to pick. -15 inch lcd screen 4 gb of ram core 2 duo dual Core E8400 3.00 GHz dvd writer windows vista/ linux -15 inch crt monitor with 2 gb ram and pentium 4 2 ghz single core HT technology windows xp hardisks both 250 GB my friend is telling me to choose the second one Pentium single core HT because he told me it runs faster becuase of HT technology and cooler and consumes less current electricity so it wont get overheated because it has HT technology so it's high definition for encoding and watching HD movies and HD sound and is like a gaming pc to play internet games. And also he said the dual core 8400 runs at 3 ghz compared to the 2 ghz so it heats very much because of the two extra cores so it takes more current raising electricty bills and is not good for gaming and watching HD movies and internet flash animations and games because of getting heated everytime. And he wants to choose and take the E8400 because he has air conditioning at home so it will be safe from heating. So which one computer should i take is it really faster because of the HT High definition technology and will i be able to play internet flash card games better and watch good HD movies Youtube etc and play all the music and songs.

  Read the article

• Can I share my cable internet connection through my ADSL wireless router?

  - by Roaders

  Hi All Over the xmas period I am at my in-laws. They have Virgin Broadband (cable) and have a basic modem / router that is plugged directly into their computer using an ethernet cable. My wife and I arrived with 5 PCs! (ok, one is a gift and won't be used) 4 of which are laptops so I would like to be able to use their internet connection. At the moment I am working so have plugged the ethernet cable into my work laptop. Rebooting the router meant that my work laptop now has internet. I have my ADSL Netgear router which is wireless. I tried plugging it in between the router and the PC but I didn't seem to be able to share the internet connection wirelessly. The original PC still had internet despite ony being connected to my router but my wireless laptop didn't have a connection. My old cable router had an internet ethernet port on the back that the modem plugged into. My ADSL router doesn't, it has a phone connection socket. Is there a way of doing what I want with the equipment I have? Thanks

  Read the article

• User authentication -- username mismatch in IIS in ASP.NET application

  - by Cory Larson

  Last week, an employee's Active Directory username was changed (or a new one was created for them). For the purposes of this example, let's assume these usernames: Old: Domain\11111 New: Domain\22222 When this user now logs in using their new username, and attempts to browse to any one of a number of ASP.NET applications using only Windows Authentication (no Anonymous enabled), the system authenticates but our next layer of database-driven permissions prevents them from being authorized. We tracked it down to a mismatch of usernames between their logon account and who IIS thinks they are. Below are the outputs of several ASP.NET variables from apps running in a Windows 2008 IIS7.5 environment: Request.ServerVariables["AUTH_TYPE"]: Negotiate Request.ServerVariables["AUTH_USER"]: Domain\11111 Request.ServerVariables["LOGON_USER"]: Domain\22222 Request.ServerVariables["REMOTE_USER"]: Domain\11111 HttpContext.Current.User.Identity.Name: Domain\11111 System.Threading.Thread.CurrentPrincipal.Identity.Name: Domain\11111 From the above, I can see that only the LOGON_USER server variable has the correct value, which is the account the user used to log on to their machine. However, we use the "AUTH_USER" variable for looking up the database permissions. In a separate testing environment (completely different server: Windows 2003, IIS6), all of the above variables show "Domain\22222". So this seems to be a server-specific issue, like the credentials are somehow getting cached either on their machine or on the server (the former seems more plausible). So the question is: how do I confirm whether it's the user's machine or the server that is botching the request? How should I go about fixing this? I looked at the following two resources and will be giving the first one a try shortly: http://www.interworks.com/blogs/jvalente/2010/02/02/removing-saved-credentials-passwords-windows-xp-windows-vista-or-windows-7 http://stackoverflow.com/questions/2325005/classic-asp-request-servervariableslogon-user-returning-wrong-username/5299080#5299080 Thanks.

  Read the article

• How To Replace Laptop HDD Without Losing Data?

  - by Ishan

  Hello, I recently went to Dell Service center and they tell that HDD is faulty and needs to be replaced. I have a Studio 1457 laptop with 500 GB HDD and don't want to lose the data(purchased in May 2010, still under warranty). I have searched a bit and I think it may be best to use a disk imaging software for this task. However, I don't know about a good software. I have following steps in mind: Get a 1 TB External HDD. Make an image of existing 500 GB HDD and store data on external disk. Install new HDD and install a brand new Windows copy and then install the software on it. Using the same software I used to make image, restore the old HDD image on new one. However, I have some questions in mind. First, is this possible? Second, I live in a country where piracy is a big issue and I am sure the support executive who will come to change HDD will have a pirated copy. But I have genuine Windows 7 Pro and don't want to lose it. Now, Dell does not supply and OS disks, so I can't install it on new HDD! If I follow above steps, which version of Windows 7 will be retained? One in the image(authentic) or one in the new HDD(pirated). I am ready to purchase a good software for this task and my budget is $50-60. Since laptop is under warranty, new HDD will be free. One last thing, I have created a Windows Migration file whose size is 70 GB. Can it be used to move from Windows 7 Pro to Windows 7 Pro?(In case I get a genuine copy of Windows 7!) Any other method to save all the data? Thanks in advance.

  Read the article

• Accidentally dd'ed an image to wrong drive / overwrote partition table + NTFS partition start

  - by Kento Locatelli

  I screwed up and set the wrong output for dd when trying to copy a freenas iso, overwriting the wrong external hard drive. Ironically, I was trying to setup a freenas server for data backup... External drive is only used for data storage, system is entirely intact Drive had a single NTFS partition filing the entire device (2TB WD elements) Drive originally had an MBR partition table. Drive now shows as having a GPT, presumably from the freenas image. Drive was mounted at the time, with maybe a couple kB of data written/read after running dd Drive is just a few months old and healthy (regular SMART / fs checks) I have not reboot the OS (crunchbang) /proc/partition still holds the correct information (and has been stored) Have dd's output (records in / out / bytes) testdrive did not find any partitions on quick or deep search running photorec to recover the more important data (a couple recent plaintext files that hadn't been backed up yet). Vast majority of disk content ( 80%) is unnecessary media files. My current plan is to let photorec do it's thing, then recreate the mbr with gparted and use cfdisk to create another NTFS partition using the sector information from /sys/block/.../. Is that a good course of action (that is, a chance of success)? Or anything else I should try first? Possibly relevant information: dd if=FreeNAS-8.0.4-RELEASE-p3-x86.iso of=/dev/sdc: 194568+0 records in 194568+0 records out 99618816 bytes (100 MB) copied grep . /sys/block/sdc/sdc*/{start,size}: /sys/block/sdc/sdc1/start:2048 /sys/block/sdc/sdc1/size:3907022848 cat /proc/partitions: major minor #blocks name ** Snipped ** 8 32 1953512448 sdc 8 33 1953511424 sdc1 current fdisk -l output: WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 2000.4 GB, 2000396746752 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table

  Read the article

• Cloned Win7: Keyboard doesn't work

  - by Marc

  I cloned my old Windows7 hard disk to a shiny new Seagate Momentus XT 500GB using the free EaseUs Disk Copy tool on my laptop. After the clone process I used the Windows 7 installation disc to start the automatic startup repair. This took maybe 15 minutes and then my cloned disk was able to start. Now the cloned disk boots until the login screen and then I can't do anything because my keyboard just doesn't work. I tried connecting an external USB keyboard but this didn't help. The mouse is working fine. Note that the keyboard works fine in BIOS and in the Windows startup options menu. I booted into safe mode and again the keyboard is not working at all. I also noticed that the letters "Press CTRL+ALT+Delete to login" are now shown in italic font but they used to be shown non-italic on the original disk. I have now replaced the clone with the original disk again and from here everything works fine. Doesn't anybody have an idea how I can get my keyboard back?

  Read the article

• Virtualbox port forwarding with iptables

  - by jverdeyen

  I'm using a virtualmachine (virtualbox) as mailserver. The host is an Ubuntu 12.04 and the guest is an Ubuntu 10.04 system. At first I forwarded port 25 to 2550 on the host and added a port forward rule in VirtualBox from 2550 to 25 on the guest. This works for all ports needed for the mailserver. The guest has a host only connection and a NAT (with the port-forwarding). My mailserver was receiving and sending mail properly. But all connections are comming from the virtualbox internal ip, so every host connection is allowed, and that's not what I want. So.. I'm trying to skip the VirtualBox forwarding part and just forward port 25 to my host only ip of the guest system. I used these rules: iptables -F iptables -P INPUT ACCEPT iptables -P OUTPUT ACCEPT iptables -P FORWARD ACCEPT iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -A INPUT --protocol tcp --dport 25 -j ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -s 192.168.99.0/24 -i vboxnet0 -j ACCEPT echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A PREROUTING -p tcp -i eth0 -d xxx.host.ip.xxx --dport 25 -j DNAT --to 192.168.99.105:25 iptables -A FORWARD -s 192.168.99.0/24 -i vboxnet0 -p tcp --dport 25 -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.99.0 -o eth0 -j MASQUERADE iptables -L -n But after these changes I still can't connect with a simple telnet. (Which was possible with my first solution). The guest machine doesn't have any firewall. I only have one network interface on the host (eth0) and a host interface (vboxnet0). Any suggestions? Or should I go back to my old solution (which I don't really like). Edit: bridge mode isn't an option, I have only on IP available for the moment. Thanks!

  Read the article

• What's the best / easiest way to combine two mailboxes on Exchange 2007?

  - by jmassey

  I've found this and this(2) (sorry, maximum hyperlink limit for new users is 1, apparently), but they both seem targeted toward much more complex cases than what I'm trying to do, and I just want to make sure I'm not missing some better approach. Here's the scenario: 'Alice' has retired. 'Bob' has taken over Alice's position. Bob was already with the organization in a different but related position, and so they already have their own Exchange account with mail, calendars, etc., that they need to keep. I need to get all of Alice's old mail, calendar entries, etc., merged into Bob's existing stuff. Ideally, I don't want to have all of Alice's stuff in a separate 'recovery' folder that Bob would have to switch back and forth between to look at older stuff; I want it all just merged into Bob's current Inbox / Calendar. I'm assuming (read: hoping) that there's a better way to do this than fiddling with permissions and exporting to and then importing from a .pst. Office version is 2007 for everybody that uses Exchange, if that helps. Exchange is version 8.1. What (preferably step-by-step - I'm new to Exchange) is the best way to do this? I can't imagine this is an uncommon scenario, but my google-fu has failed me; there seems to be nothing on this subject that isn't geared towards far more complex scenarios. (2): h t t p://technet.microsoft.com/en-us/library/bb201751%28EXCHG.80%29.aspx

  Read the article

• Heartbeat/DRBD failover didn't work as expected. How do I make the failover more robust?

  - by Quinn Murphy

  I had a scenario where a DRBD-heartbeat set up had a failed node but did not failover. What happened was the primary node had locked up, but didn't go down directly (it was inaccessible via ssh or with the nfs mount, but it could be pinged). The desired behavior would have been to detect this and failover to the secondary node, but it appears that since the primary didn't go full down (there is a dedicated network connection from server to server), heartbeat's detection mechanism didn't pick up on that and therefore didn't failover. Has anyone seen this? Is there something that I need to configure to have more robust cluster failover? DRBD seems to otherwise work fine (had to resync when I rebooted the old primary), but without good failover, it's use is limited. heartbeat 3.0.4 drbd84 RHEL 6.1 We are not using Pacemaker nfs03 is the primary server in this setup, and nfs01 is the secondary. ha.cf # Hearbeat Logging logfacility daemon udpport 694 ucast eth0 192.168.10.47 ucast eth0 192.168.10.42 # Cluster members node nfs01.openair.com node nfs03.openair.com # Hearbeat communication timing. # Sets the triggers and pulse time for swapping over. keepalive 1 warntime 10 deadtime 30 initdead 120 #fail back automatically auto_failback on and here is the haresources file: nfs03.openair.com IPaddr::192.168.10.50/255.255.255.0/eth0 drbddisk::data Filesystem::/dev/drbd0::/data::ext4 nfs nfslock

  Read the article

• Understanding !d command in sed with respect to saves

  - by richardh

  I have a directory of tab-delimited text files and some have comments in the first few lines that I would like to delete. I know that the first good line starts with "Mark" so I can use /^Mark/,$!d to delete these comments. After this deletion I have several other replacements that I make in the (new) first line that has variable names. My question is, why do I have to save sed's output to get my script to work? I understand that if I line is deleted, then the output doesn't proceed downstream because there is no output. But if I don't delete (i.e., !d) then why do I have to save to file? Thanks! Here is my shell script. (I'm a sed newbie, so any other feedback is also appreciated.) #!/bin/bash for file in *.txt; do mv $file $file.old1 sed -e '/^Mark/,$!d' $file.old1 > $file.old2 sed -e '1s/\([Ss]\)hareholder/\1hrhldr/g'\ -e '1s/\([Ii]\)mmediate/\1mmdt/g'\ -e '1s/\([Nn]\)umber/\1o/g'\ -e '1s/\([Cc]\)ompany/\1o/g'\ -e '1s/\([Ii]\)nformation/\1nfo/g'\ -e '1s/\([Pp]\)ercentage/\1ct/g'\ -e '1s/\([Dd]\)omestic/\1om/g'\ -e '1s/\([Gg]\)lobal/\1lbl/g'\ -e '1s/\([Cc]\)ountry/\1ntry/g'\ -e '1s/\([Ss]\)ource/\1rc/g'\ -e '1s/\([Oo]\)wnership/\1wnrshp/g'\ -e '1s/\([Uu]\)ltimate/\1ltmt/g'\ -e '1s/\([Ii]\)ncorporation/\1ncorp/g'\ -e '1s/\([Tt]\)otal/\1ot/g'\ -e '1s/\([Dd]\)irect/\1ir/g'\ $file.old2 > $file rm -f $file.old* done

  Read the article

• Change default profile directory per group

  - by Joel Coel

  Is it possible to force windows to create profiles for members of one active directory group in a different folder from members in another active directory group? The school here uses DeepFreeze to protect public computers. In a nutshell, DeepFreeze prevents all changes to a hard drive such that every time you restart the machine the disk is identical to it was at the time you froze it. This is a bit different than restoring to an image, in that it never really wrote changes to disk in a permanent way in the first place. This has a few advantages over images: faster recover times, and it's easy to thaw the machine for a few minutes to perform maintenance such as windows updates (which can even be automated). DeepFreeze also allows you to configure a "thawspace" partition, where changes are persistent across reboots. One of the weaknesses of DeepFreeze is that you end up needing to create a new profile every time you log in, unless your profile existed at the time the machine was frozen. And even then, any changes you make to your profile while working on a frozen machine are lost. As students have frequent legitimate needs to log in to our classroom machines, there is currently a lot of cleanup involved from time to time in removing their old profiles and changes, so I want to extend DeepFreeze to protect our classroom computers as well as public computers. The problem is that faculty have a real need to keep a stateful profile locally on these classroom computers. The solution I would like to use is to configure Windows via group policy (or even manually, if that's the way I'll have to do it) to place profile folders on the thawspace partition, but only for members of the faculty security group. Is this possible?

  Read the article

• samba access from win98

  - by SimonSalman

  Hello, the admin installed a new file server in our institute: OpenSuse 11.1 with Samba 3.2.7-11.3.2-2154-SUSE-CODE11. They copied the smb.conf from the old machine (hosting Samba 3.0.0) to the new one. Everything works as before, but one Windows 98 machine can see but not access the file server. It prompts for user authentication, but will not accept any user-password combination. There exists a lot of discussion about the problem on the net, but none provided a clear answer to the problem. EDIT: 1. I changed Win98 registry enable plain-text passwords, and alternatively changed server's smb.conf and /etc/smbpasswd to accept encrypted passwords 2. Further I provide a profile with a user-password combination on Win98 machine similar to one of the samba users-password combinations. 3. I changed smb.conf such that the samba server is the Local Master Browser all these changes are not necessary when using the older samba server. So, I conclude that a configuration problem on the server side is likely. If you need any further information, I will post them here. Best regards, Simon

  Read the article

• Cannot delete flash9.ocx

  - by Kara Marfia

  Some kinda voodoo, indeed. Bought a new boot drive, and it's time to use the old drive for data. I thought I'd save some time by just wiping the unneeded system folders, instead of backing up, formatting, and restoring. Wups! I have a single Adobe file that absolutely will not be deleted. G:\Windows\SysWOW64\Macromed\Flash\flash9.ocx - though it may have started with a different file name. I'm able to rename it, oddly enough. To be clear, the drive is currently plugged in externally. So I can boot the computer, plug this drive in afterward, and immediately attempt to delete. "File in use" box reads "the action can't be completed because the file is open in another program". I'd format at this point, but it's my white whale, and I have to know if Adobe has inserted some nasty little registry hack - or whatever it is - making this impossible. Since I'm sure it'll come up, I've taken ownership of the file - and this was the trick preventing me from deleting anything else on the drive - full rights on the file permissions, you name it, I've fiddled with the file itself. I'm about to try uninstalling flash from the system drive, in case that aligns the planets properly. Sometimes I wish I were less stubborn, and could just format already.

  Read the article

• Moving server room to another part of the building

  - by PHLiGHT

  This question is a bit different than the typical we are moving our server room to an off site location or we are moving the whole office to a new building. Management wants to add some more office space and to do so they want to move the server room to another location. The server room has Verizon smart jacks, a few servers, PBX and all the office network drops go into this room. I'm going to go over there to scout out an alternate location for the equipment because that is still TBD. This sounds like quite a pain since the Verizon equipment for our MPLS will need to be moved (never done that) and the office jacks will need to be re-run. How do you handle the jacks? I was thinking of keeping them in the same location and having new wall plates put in with half the ports going to the current location and the other half to the new location. Or do you think that 40 drops could just be done over the weekend so the old stuff would be ripped out and replaced with the new? Currently the wiring is a mess so this could be a blessing in the long run.

  Read the article

• Sending bulkmail from different server?

  - by Omer Gencay

  I want to send bulk domains from my vps for a domain(cagetur.com) hosted in another company. The company(cagetur) will go on using the old hosting account for its mailing operations. The vps will just be used for smtp for once a week. I created an A record "vps.cagetur.com". directed it to the IP adress of vps then created a mx record with bigger preference number "50 vps.cagetur.com." on the domain control panel. When I trace the "vps.cagetur.com" i can reach my vps now. I installed hMail on the vps. Configure it (created domain, accounts). I have no information about "system" so i couldn't get further from this point. I can connect to the mail server with Outlook without errors. I can send an email from the account on the vps but it doesn't reaches. No errors, no emails. What do i have to do for getting it work? Thank you.

  Read the article

• unable to copy file to folder, permission denied without explanation

  - by ValekHalfHeart

  Recently Norton Internet security deleted ml.exe (an assembler I use to program in masm32) off of my computer, thinking that one of the programs I had written with it was a virus (it was most certainly not). Fortunately, I had a copy of ml.exe backed up in an external hard drive, and tried to copy it over to my computer. The old ml.exe was located in C:\masm32\bin, so I tried to copy the new one to that location. After disabling Norton (which had opened the folder and preventing me from accessing it), I am still unable to copy the new file to C:\masm32\bin. When I tried, Windows announced that I would need Administrator permission to copy the file. Since I'm an admin, I figured this wouldn't be a problem although it was unexpected, as I have never had to provide administrator permission to access this folder before. However, instead of prompting me to enter my password, Windows simply refuses to copy the file: I repeat, I was not asked to provide a password. It simply says that I do not have permission. Does anyone know what's happening and how to fix it? Is Norton still causing problems, or it something else?

  Read the article

• Encrypted WiFi with no password?

  - by Ian Boyd

  Is there any standard that allows a WiFi connection to be encrypted, but not require a password? i know that (old, weak) WEP, and newer WPA/WPA2 require a password (i.e. shared secret). Meanwhile my own wireless connections are "open", and therefore unencrypted. There is no technical reason why i can't have an encrypted link that doesn't require the user to enter any password. Such technology exists today (see public key encryption and HTTPS). But does such a standard exist for WiFi? Note: i only want to protect communications, not limit internet access. i get the sense that no such standard exists (since i'm pretty capable with Google), but i'd like it confirmed. Claraification: i want to protect communcations, not limit internet access. That means users are not required to have a password (or its moral equivalent). This means users are not required: to know a password to know a passphrase to enter a CAPTCHA to draw a secret to have a key fob to know a PIN to use a pre-shared key have a pre-shared file to possess a certificate In other words: it has the same accessibility as before, but is now encrypted.

  Read the article

• RHEL 6 vs latest vanilla kernel differences?

  - by Yanko Hernández Álvarez

  What are the differences of the RHEL 6 kernel and the latest kernel.org one? I know RHEL is based on 2.6.32 with some features backported from newer kernels and that it also has other features that are not yet part of the latest vanilla kernel. Is there any comparison of the features of both kernels so I can tell how advanced is the RHEL kernel 6 vs. latest vanilla and vice versa?. It don't have to be the latest kernel at all, but the more recent the vanilla version, the better. What I want to know is: What features I lose/win if I change the RHEL kernel for the latest kernel.org’s one? What features are less matured/developed in the latest vanilla kernel than in RHEL’s (and vice versa)? (I guess KVM virtualization is one of them, but I'm not so sure.) What things (libraries / programs / etc) don’t interact as well with the latest vanilla kernel than with the RHEL’s one? In a related note: Is there ANY way to be as up to date (kernelwise) as possible (using RHEL 6) without loosing too much in the process? (Any way except doing the patching myself, I don’t have the necessary expertise) Any repo I don’t know of? Any alternative? Update: The srpm doesn't include patches (see comments), so that way is not possible. Clarification: I'm interested in how "old" the RHEL kernel gets as time goes by, and to know when the latest upstream kernel includes all the improvements included in the RHEL version.

  Read the article

< Previous Page | 437 438 439 440 441 442 443 444 445 446 447 448  | Next Page >