Search Results

Search found 16560 results on 663 pages for 'far'.

Page 442/663 | < Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >

• How can I get around windows 8.1 store (& metro apps) not working with UAC disabled

  - by Enigma

  I have UAC disabled because it is annoying and causes more problems that it could ever possibly solve, at least for me. Here is yet another problem, and it seems to be due to a recent update as I don't remember it in the past. Even with a MS account, I can't use the store because UAC is disabled. How can I get around this? Short term I can just enable it, reboot, use store, disable it, reboot and be on my way but there has to be a better way (other than MS getting their software completely right - like that will happen anytime, ever) Edit: Apparently this is far more of an issue than I originally thought. Now every(?)many metro apps requires UAC. Anyone aware of the update this got rolled in with? Thankfully netflix isn't affected which is the only metro app I use at the moment. What I see: Event Log info: Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: This app can't be activated when UAC is disabled. See the Microsoft-Windows-TWinUI/Operational log for additional information.

  Read the article

• Symantec Antivirus Corporate -- two problems

  - by Alex C.

  We have a Windows network with a domain and about 50 clients. A few months ago, we installed Symantec Antivirus, Corporate Edition ver. 10.1.8.8000. There are two problems. The larger problem is that the software isn't very good at stopping viruses. In the last month, four different machines have become infected with those viruses that masquerade as antivirus software. Two machines I was able to clean with MalWareBytes. The other two were hopeless, and I had to reinstall Windows. Is there something I can do to make the Symantec product more effective? As far as I can tell, it successfully updates definitions nightly and pushes the definitions to the clients. The smaller problem is that the Symantec client applications sometimes initiate scans at random (and inappropriate) times. One of my co-workers complained to me yesterday that her computer was running very slow. I looked at the scan history and found that Symantec had scanned the computer three times during the past two days, and each time during the workday. No threats were found. Not sure why it's doing this, but I'd like it to stop. Any help would be appreciated. Thanks.

  Read the article

• (Win7) Gets stuck with ~1% CPU. Especially with multithreading

  - by meow

  Windows 7 32 bit, up to date, Intel i7 860. (For some reason the company runs 32bit Windows everywhere.) I tried to update all motherboard drivers etc. as far as possible. I have a performance issue with a machine which appears in connection with multithreading (or so I think). As an example (and where I most often see it, but it appears on other programs as well): ProteoWizard is a file conversion tool for mass spectrometry files. I can add a list of files and it will attempt to process up to 8 files in parallel (quadcore x 2 threads/core). If I choose 1 to 6 files, I start the process and it goes straight through. If I have =7 files in the queue, conversion goes to ~20%, then gets stuck for 15 seconds, then continues again, always in "chunks" of a few % before getting stuck again. During the time the process is stuck, CPU is at 1%. RAM is not limiting, it is maybe at 70% or so and not going up. I don't get the same problem on other, even slower machines. The computer gets also stuck at 1% CPU doing nothing on other occasions, but for multithreading it is most frequent. Where should I look for the problem?

  Read the article

• ftp.exe does not convert end of line characters while transferring to FreeBSD ftp server

  - by Jagger

  I am having problems transferring a text file from Windows 7 using ftp.exe to a FreeBSD server. After the file transfer the end-of-line characters are not changed from \r\n to \n, Instead they remain with the carriage return character which can be seen in for example mcedit as ^M. The file is transferred in ascii mode. Has anybody run into similar problems in the past? As far as I know using the ascii mode during FTP transfer should convert those characters automatically. Does it depend on the server configuration? EDIT: The file can be seen here. EDIT: I have also tried with ncftp.exe under Cygwin but the result is the same. The carriage return character has not been removed even if the transfer type was ASCII. EDIT: It does not work the other way round either. I created a text file in FreeBSD and then downloaded it is ASCII mode to my Windows machine. The end of line characters remained LF as they were in FreeBSD.

  Read the article

• Can a cur file have an alpha map (for high quality transparency)?

  - by Codemonkey

  I want to convert this Heroes of Newerth cursor into a cur file so I can use it as a cursor on windows and on my website. The cursor is now in a PNG file with an alpha map, and I have so far been unsuccessful in converting it to a cur file. The things I've tried is using the Photoshop cursor plugin to simply save the png as a cur. The result was a working cur file with a white background instead of a transparent one. I've also tried painting the background pure green (0, 255, 0) and saving as a cur file, in which case the background was still green when I tried using it as a windows cursor. I've also tried what's been mentioned in a few tutorials, which is selecting the area I want transparent and saving the selection in Photoshop (it then ends up as a new channel). So I selected the cursor and inverted the selection and saved it. The result was a bit odd. Instead of a transparent background, I now get a background that inverts the colours behind it, just like the "Windows inverted" mouse scheme. So is there any way to accomplish what I'm trying to do?

  Read the article

• Is it possible to use Google Docs Viewer to view files already in Google Docs?

  - by john2x

  The title is a little confusing. I'll elaborate. As far as I can tell, the Google Docs Viewer tool accepts a link to a raw document file (e.g. .doc, .pdf, et. al.), and renders its contents in the browser. For example, this url to a pdf http://research.google.com/archive/bigtable-osdi06.pdf when passed to Viewer, returns this link: http://docs.google.com/viewer?url=http%3A%2F%2Fresearch.google.com%2Farchive%2Fbigtable-osdi06.pdf What I'm trying to achieve is, use the Viewer to view a document already hosted in Google Docs (i.e. no longer a raw document file). When passing a link to a Google Docs document to the Viewer, the result is not as expected. It renders the link's HTML source instead of the document's contents. The reason I want to do this is that I want to be able to use the "embed" feature of Viewer to view Google Docs documents. Does Google Docs have a "link to embeddable view" feature? P.S. Here is a sample snippet to an embedded document. This is what I want, but pointing to an existing Google Docs document. <iframe src="http://docs.google.com/viewer?url=http%3A%2F%2Fresearch.google.com%2Farchive%2Fbigtable-osdi06.pdf&embedded=true" width="600" height="780" style="border: none;"></iframe>

  Read the article

• ASP.Net Session Timing Out Rapidly

  - by Zac

  We have an ASP.Net 3.5 website running on Windows Server 2008 with IIS7. The session timeout period for this site is configured to be 20 minutes - however, it is currently lasting for between 40 and 50 seconds. After researching the problem we investigated several configuration values which could be involved in the timeout period but none of them are set to less than 20 minutes. The areas we look are as follows: web.config system.web/sessionState element (20 minutes). web.config system.web/authentication/forms element (not present, defaults to 30 minutes). Sites/{website}/ASP/Session Properties/Time-out (20 minutes). Application Pools/{appPool}/Advanced Settings/Process Model/Idle Time-out (20 minutes). We've also noted that the CPU is staying around 0% and that RAM usage is flat-lining around 1.07 GB (of 8 GB available) - so there is no performance-based reason for IIS to be recycling the Application Pool as far as we can tell. Are there any settings we've overlooked which could cause the session timeouts to be expiring so quickly? EDIT A couple of additional points: This is not occurring in development, only on the server. The session is not sliding (i.e. if we refresh the page a few times it still times out approximately 40 - 50 seconds after the session was created.

  Read the article

• OpenVPN access to a private network

  - by Gior312

  There are many similar topics about my issue, however I cannot figure out a solution for myself. There are three hosts. A without a routable address but with an Internet access. Server S with a routable Internet address and host B behind NAT in a private network. What I've managed to do is a OpenVPN connection between A and B via S. Everything works fine so far according to this manual VPN Setup What I want to do is to connect A to Bs private network 10.A.B.x I tried this manual but had no luck. So A has a vpn address 10.9.0.10, B's vpn address is 10.9.0.6 and B's private network is 10.20.20.0/24. When at the Server I try to make a route to Bs private network like this sudo route add 10.20.20.0 netmask 255.255.255.0 gw 10.9.0.6 dev tun0 it says "route: netmask 000000ff doesn't make sense with host route" but I don't know how to tell Server to look for a private network in a different way. Do you know how can I make it right ?

  Read the article

• TortoiseSVN client slows Explorer to a crawl in Windows XP running in Parallels

  - by Cory Larson

  I thought I'd make my first SuperUser question relatively simple, though it's the kind of question that may not get many responses as I'm not directly involved with the issue. A colleague does his development in Windows XP running in Parallels on his Mac. We've just migrated our VSS repository to SVN, and we've gone with TortoiseSVN as our client of choice with the Ankhsvn plugin for Visual Studio. On his XP instance, after installing TortoiseSVN, browsing through folders using Explorer is extremely slow; about 15 - 30 seconds before the contents of the next folder displays. It's the slowest when opening My Computer. Once he reaches a folder that contains the working content of an SVN project, Explorer behaves quickly again as expected. It seems that TortoiseSVN may be spending a bunch of time searching subfolders for stuff so it can do its icon-overlay thing, but that's just a guess. I've used TortoiseSVN for years on both XP and Vista on far less powerful machines without any issues with Explorer, so I'm attributing the slowness to it being run in a VM, though that may not be the actual issue. So has anyone encountered similar performance issues, and/or know of a fix? Keep in mind that any requests to make changes to his configuration will need to be communicated and thus my response time might be slow. Thanks everyone!

  Read the article

• Force delivery retry without restarting the SMTP Service on Windows Server 2008 R2

  - by Mathias R. Jessen

  I have a Windows Server 2008 R2 box hosting 3 virtual SMTP servers; vSMTP01, vSMTP02 and vSMTP03. The first two are configured to deliver all messages to dedicated smarthosts, while the last is set to just deliver the messages on its own. All other delivery settings are as default ----(vSMTP01)-----> {SMARTHST01} / ----Inbound mail--->---SMTPSRV01---[----(vSMTP02)-----> {SMARTHST02} \ ----(vSMTP03)-----> { Internet } Now I want to take SMARTHST01 out for maintenance, but I don't want to reject submissions to vSMTP01 while doing so, so I just let it continue running. When SMARTHST01 is no longer responding, vSMTP01 queues the messages and wait for the first retry interval to pass (15 minutes). So far so good. Let's say SMARTHST01 gets online again after 20 minutes. The first interval has passed, and I'll have to wait another 25 minutes for the second retry interval to pass. If I stop and start the SMTP Service (Services.msc - Simple Mail Transfer Protocol service - Stop), the server will retry all deliveries, but that would cause a service interruption for ALL virtual SMTP servers on the machine, which is highly undesirable. How can I manually force vSMTP01 to retry delivery of all queued messages without interrupting the service of vSMTP02 and vSMTP03?

  Read the article

• MySQL based authentication with crypt()ed password fails in Apache 2.2

  - by Fester Bestertester

  I'm trying to set up a simple CalDAV/CardDAV server with a Radicale backend and an Apache 2.2 frontend. So far, it's all nice and simple, but I can't get the MySQL based authentication to work. I'd like to authenticate users against an existing MySQL database, and I need the REMOTE_USER variable to be set (pretty much like in the configuration examples for Radicale). I've tried mod_auth_mysql, which authenticated the users nicely, but failed to set the REMOTE_USER variable. The newer alternative seems to be mod_authn_dbd, which doesn't seem to like the crypted passwords in the MySQL database. According to the documentation, crypted passwords should work, so maybe I'm just missing a simple parameter. The configuration looks like this: DBDriver mysql DBDParams "sock=/var/run/mysqld/mysqld.sock dbname=myAuthDB user=myAuthUser pass=myAuthPW <Directory /> AllowOverride None Order allow,deny allow from all AuthName 'CalDav' AuthType Basic AuthBasicProvider dbd require valid-user AuthDBDUserPWQuery "SELECT crypt FROM myAuthTable WHERE id=%s" </Directory> I've tested the query, it works fine. And as mentioned before, mod_auth_mysql worked nicely against the same database, but didn't set the required variables. Am I just missing some configuration parameter? Or is mod_authn_dbd just not the right tool to achieve what I want?

  Read the article

• Connecting a Wifi router to receivers with a cable instead of antenna?

  - by 31eee384

  This is a very strange question--I'd go so far as to say it's a stupid question. I'm being told that it is possible to, to describe it briefly, use a cable to connect an access point and a receiver directly to one another. This means that I would unscrew the access point's antenna, and attach one end of a cable to the port. Then, on the wireless receiver, I would also unscrew the antenna and plug in the other side of the cable. I'm being told the connection would work after this, just as a normal Wifi connection would. Bonus mini-question: if this works, would it still work if a splitter were attached to the access point and multiple receivers plugged in to the network? What would happen if I do this? Based on my surprisingly deficient knowledge of radio transmission, I don't think it would work. I would like some help knowing why it won't (or will) though, if possible. This is a somewhat hypothetical question--I realize that Ethernet does this exact job very handily, and I could just throw in a switch instead of the splitter. I simply feel that I should understand this scenario. Thanks for any help you can offer.

  Read the article

• Can't access site internally, but DNS works

  - by BloodyIron

  1) I have apache2 running a vhost for a website. 2) This apache2 instance is already successfuly setup for other websites on it to be accessible internally and externally. 3) I am using an internal bind9 server to resolve the new website's domain internally to the private IP. This bind9 server is not public facing, nor is it the master server on the internet. 4) The DNS internally resolves to the right IP. 5) Firefox reports "server not found". 6) I have copied the config almost identically to other configs that are known to work (adjusting for proper paths of course). In turn I have reloaded and restarted apache2 repeatedly. 7) I have an entry to forward .org .info .net alternative TLDs to .com in the vhost config for this domain, and my browser goes from .org to .com despite note #5. 8) /var/log/apache2/access.log shows when someone externally tries to access the site, but no activity is observed when someone tries to access internally. Changing the log level does not appear to improve the situation. 9) I am out of ideas, nothing appears to be wrong. Please help? To be explicit. Why is this new site unreachable internally? I would like to clarify on something, even though I have already outlined this. YES I know this system is in a private network. NO it is not going through a router. YES I am using an internal DNS server (bind9) to resolve, and YES it does resolve to the proper internal IP. YES other websites on the same server setup in the same way with internal resolution work right now and have done for a while. Everything for this domain is setup the same as the other working domains as far as I can tell. The other working domains are internally AND externally accessible. This domain I am working with is only currently externally accessible. When I go to it internally firefox tells me "Server not found".

  Read the article

• Message to distribution list with removed recipient bouncing back when sent from external mail server

  - by jshin47

  I removed a particular user from all distribution groups manually about five days ago. This user was a member of two particular groups that have other recipients. The OAB polling interval is 30 minutes, not that it really matters here. The situation is that I have an SMTP server that is not part of my Exchange organization that sends out automated email reports to these distribution groups. It sends them using a from: address that is a member of our Exchange organization. That member receives a bounce-back email indicating the member that should have been removed from the group does not exist. I have also verified that this is the same behavior when sending an email from a webmail service like GMail or Hotmail (outside of our Exchange organization of course) to either of those distribution group addresses. However when I send an email internally to one of those distribution group addresses everything works as expected (no bounce messages.) Not sure why this would be happening, but also not sure how to go about diagnosing the issue. I've looked at the SMTP headers and there are no relevant clues there as far as I can tell. I think it's an Exchange issue.

  Read the article

• Can't install Hyper-V in Windows 8 Pro. Causes boot loop, pain & suffering

  - by Nick

  Hardware: Intel i7 2600K (not overclocked, SLAT compatible, virt. features enabled in bios) Asus Maximus IV Extreme-Z (Z68) 16Gb RAM 256Gb SSD Other non-trivial working parts Adding Hyper-V is causing a boot loop resulting in an attempt at automatic repair by Windows 8 after the second or third loop: I'm trying to get the Windows Phone 8 SDK installed and I've narrowed down my troubles to the Hyper-V feature in Win8. This is required to run the WP8 emulator and there are no install options to omit this feature. My first attempt completely borked the OS as I did not have a recent restore point or system image, so I did a completely clean install and made plenty of backups/restore points. I skipped the SDK install and went straight for the windows feature add-on for Hyper-V. This confirmed that Hyper-V is the issue as the same behavior resulted. I cannot find any hint in the Event Logs. Cancelling automatic recovery causes the same behavior to repeat. I don't have any other VM products installed. My only recourse is to use a restore point, try something else, install it again, and see what happens. No luck so far. I'm on my 10th attempt here. Any help would be much appreciated.

  Read the article

• Ubuntu IP Configuration - multiple subnets & interfaces

  - by HaydnWVN

  Have a 'new' mailserver running postfix on Ubuntu. We are having some problems configuring the subnets & interfaces. Basically 2 subnets (.253. & .254.) need to be connected through the 3rd subnet (.252.) where the Router is residing. # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.62.254.199 netmask 255.255.0.0 network 10.62.254.0 broadcast 10.62.255.255 #gateway 10.62.252.138 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 10.62.252.138 dns-search ***.com auto eth1 iface eth1 inet static address 10.62.253.199 netmask 255.255.0.0 network 10.62.253.0 broadcast 10.62.255.255 #gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-nameservers 10.62.252.138 dns-search ***.com auto eth2 iface eth2 inet static address 10.62.252.199 netmask 255.255.0.0 network 10.62.252.0 broadcast 10.62.255.255 gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-search ***.com I have an external support company who are looking into this (they built and configured this server), but it's taking far too long... So I'm looking to highlight the mistake!

  Read the article

• Setting up ssh config file with id_rsa through tunnel

  - by Rubens

  I've been struggling to set up a valid configuration to open a connection with a second machine, passing through another one, and using an id_rsa (which requests me a password) to connect to the third machine. I've asked this question in another forum, but I've received no answer that could be considered very helpful. The problem, better described, goes as follows: Local machine: user1@localhost Intermediary machine: user1@inter Remote target: user2@final I'm able to do the entire connection using pseudo-tty: ssh -t inter ssh user2@final (this will ask me the password for the id_rsa file I have in machine "inter") However, for speeding things up, I'd like to set my .ssh/config file, so that I can simply connect to machine "final" using: ssh final What I've got so far -- which does not work -- is, in my .ssh/config file: Host inter User user1 HostName inter.com IdentityFile ~/.ssh/id_rsa Host final User user2 HostName final.com IdentityFile ~/.ssh/id_rsa_2 ProxyCommand ssh inter nc %h %p The id_rsa file is used to connect to the middle machine (this requires me no password typing), and id_rsa_2 file is used to connect to machine "final" (this one requests a password). I've tried mixing up some LocalForward and/or RemoteForward fields, and putting the id_rsa files in both first and second machines, but I could not seem to succeed with no configuration whatsoever. Hope somebody can help me here! Regards! P.S.: the thread I've tried to get some help from: http://www.linuxquestions.org/questions/linux-general-1/proxycommand-on-ssh-config-file-4175433750/

  Read the article

• What are the replacement options for an IDE hd for a DOS based system?

  - by dummzeuch

  I have got a few "embedded" systems running MSDOS 6.2 which boot from and store data to IDE hard disks. Since these drives are nearing their end of life, the question arises how we can replace them. The requirements are: DOS must be able to install and boot from these drives. They must be able to sustain heavy (mostly) write access. If possible, they should be able to survive moderate vibrations (not too bad since the current hds have survived several years of that) I considered the following options so far: other ide hard drives: Unfortunately modern IDE drives are too large so DOS cannot boot from them even if I create small partitions. Older IDE drives are just that: old, so they are probably not the most reliable ones any more. SSDs: There are a few SSDs with IDE interface available. I have not yet tried them. Does anybody have any experience with them? They look like the ideal replacement provided that DOS can boot from them and that writing speed does not deteriorate too much (the old hds are no race cars either). Compact Flash: There are adapters for using CF with IDE controllers and they work fine. DOS can boot from them and they have no problems at all with vibrations. What I am not sure about is their durability. DOS uses FAT so some very few sectors are written every time the medium is being written to. IDE to SATA converters: I have no idea whether they are any good. Has anybody tried them? It might be an option to use one of these to connect an SATA SSD to the system. Are there any alternatives that I have missed? (We are working on replacing these systems, but it will still take a few years.)

  Read the article

• How to get just value from database query in Excel?

  - by Corin

  I'm creating a spreadsheet as a collection point of information from a number of MS Access databases. I will run a query on each database to get a count of records in a particular table. Each database has the same structure but different content as they are used in different situations. So the query returns a single value, rec_count. I've figured out how to create that query, save it and then use it as the data source. So far so good. The problem is that Excel treats the query results as a table. So instead of getting just the single value the query returns, I also get the field name. Thus the result takes up two cells instead of one. When linking in the data source, I only see Table, PivotTable Report and PivotChart as options for viewing the data. I don't want any of those. I just want the single value without any formatting, column headers, etc. Is there a way to do this is Excel 2007?

  Read the article

• My new SSD is causing issues. How can I solve them?

  - by Allan

  Computer specs 1 TB harddisc 120 GB 520intel SSD 8 GB DDR3 RAM Athlon Phenom II x64 955 3. 2ghz DK DFI Lanparty FX7900 M3H3 motherboard ASUS ATI RADEON HD6970 2 GB I have bought a new SSD (Intel 520, 120 GB), and wanted to use this as my system disc. I removed the other harddisc, and installed the SSD with the newest firmware. And then Windows 7 I updated Windows 7 with no problems and then put back my old harddrive. I formatted that old harddrive just to clean up at the same time... So at this stage everything was perfect. My new SSD was set as Master 0 Primary it boots on it and I have 1 TB emptyu harddrive I can use for whatever I want. So far no errors at all Now here is the problem, I installed a few games and everytime I tried to play the computer would say Windows must restart because DCOM server process launcher service terminated, or it says Windows must now restart because the Plug and Play service terminated unexpectedly Most commonly this error is caused by a rootkit virus, well I have tried formatting my entire computer, and running every antivirus I could find, so that shouldn't be it. I've also read somewhere it might happen when there are hardware issues. That on the otherhand would make sense, as I just put in a new SSD. I don't expect you to know this error. I haven't found anyone who knew it yet. maybe you can me guide through what might have gone wrong when I placed in the SSD? What have I checked regarding the SSD? It displays the right name when the computer starts up It has the newest firmware Did a 'sfc /scannow' which told me everything was fine I don't know what to do from here. Everything seems to work great with the drive. when I start playing games my computer crashes.

  Read the article

• KVM virtual machine unable to access internet

  - by peachykeen

  I have KVM set up to run a virtual machine (Windows Home Server 2011 acting as a build agent) on a dedicated server (CentOS 6.3). Recently, I ran updates on the host, and the virtual machine is now unable to connect to the internet. The virtual network is running through NAT, the host has an interface (eth0:0) set up with a static IP (virt-manager shows the network and its IP correctly), and all connections to that IP should be sent to the guest. The host and guest can ping one another, but the guest cannot ping anything above the host, nor can I ping the guest from anywhere else (I can ping the host). Results from the guest to another server under my control and from an external system to the guest both return "Destination port unreachable". Running tcpdump on the host and destination shows the host replying to the ping, but the destination never sees it (it doesn't even look like the host is bothering to send it on at all, which leads me to suspect iptables). The ping output matches that, listing replies from 192.168.100.1. The guest can resolve DNS, however, which I find rather odd. The guest's network settings (connection TCP/IPv4 properties) are set up with a static local IP (192.168.100.128), mask of 255.255.255.0, and gateway and DNS at 192.168.100.1. When originally setting up the vm/net, I had set up some iptables rules to enable bridging, but after my hosting company complained about the bridge, I set up a new virtual net using NAT and believe I removed all the rules. The VM's network was working perfectly fine for the last few months, until yesterday. I haven't heard anything from the hosting company, didn't change anything on the guest, so as far as I know, nothing else has changed (unfortunately the list of packages updated has since fallen off scrollback and I didn't note it down).

  Read the article

• How do you create an ssh key for the apache user on Redhat?

  - by Josh Smeaton

  As the question asks, how do I generate an ssh key for the user apache on Redhat? My use case, is that we have a mercurial server running under the apache user. We also have several web servers clustered that we need to log on to manually and do pulls from. Ideally, what we'd like to do is have the mercurial server push all changes to all the webservers in the cluster. To do this, we want to use ssh, as setting up http mercurial servers on each of the web servers seems like too much work, and far too heavy. What I've tried to do is the following: > sudo mkdir /var/www/.ssh > sudo chown -R apache:nobody /var/www/.ssh > su - apache -c "ssh-keygen -t rsa" This account is currently not available. I found the above commands elsewhere, but I can only assume that Redhat has differences to whatever distro was used for the above. Is there a way I can generate an ssh-key for the apache user?

  Read the article

• empty file from tomcat https redirect?

  - by amertune

  I am using tomcat 6.0.20, with jdk 1.6.0_18 on 64 bit linux (tomcat downloaded from tomcat.apache.org, not installed from repositories). I have iptables redirects from port 80 - 8080 and 443 - 8443. In server.xml, the connector for port 8080 redirects to 443, and the 8443 connector has proxyPort="443". In conf/web.xml, I have added this bit at the end of the file (but still inside the <web-app</webapp tags). <security-constraint> <web-resource-collection> <web-resource-name>Protected Context</web-resource-name> <url-pattern>/*</url-pattern> </web-resource-collection> <user-data-constraint> <transport-guarantee>CONFIDENTIAL</transport-guarantee> </user-data-constraint> </security-constraint> I also have two contexts, ROOT and mywebapp. If I go to http://myurl.com, then I get redirected to https://myurl.com. If I go to http://myurl.com/mywebapp/, then I get redirected to https://myurl.com/mywebapp/. The problem I'm having is when I go to http://myurl.com/mywebapp (no trailing slash). When I do this I get a prompt to download an empty file that has an empty name. Going to https://myurl.com/mywebapp works. I would think that a user typing myurl.com/mywebapp is far from rare. Is there something I'm missing?

  Read the article

• MongoDB and GrifFS. What are the best storage options in the range of 1 TB?

  - by Nerian

  We are going to launch a service that will require between 1 and 2 GB for file storage per paid user. I am going to use GridFS for storing files. I am pondering the different options for storing the database. But since I am unexperienced at deployment and it is my first time with Mongodb I need your experience. Criteria: I want to spend my time developing my core business, that is, my own application. I am a Ruby on Rails developer. I do not like to mess with server configuration. Hence, I would like a fully managed hosting solution. But I would like to know about any other option, if you think it is worth it. It should be able to scale. Cloud style. Pay as you go. The lower the price, the better. So far I known of these services: https://mongohq.com/pricing https://mongomachine.com/pricing https://mongolab.com/about/pricing/ http://cloudcontrol.com/add-ons/mongodb/ And they seem to be OK for common needs, that is no file storage. But I am going to use GridFS, so the size matters. These services seems to scale, in price, quite poorly. MongoHQ: The larger plan max storage is 20 GB. Seems like a very little storage, for GridFS. MongoMachine: Flat price, 2.5$ per GB. I didn't found the limit. Seems like a good price, comparing the others. MongoLab: 3.984 GB max, which I don't think I will hit, so perfect. 8$ per GB, quite costly. CloudControl: The larger plan is 20 Gb. The custom service starts at 250€ plus some unspecified charge per GB. What is your experience with these services? Any downtimes? Other possibilities?

  Read the article

• Why is my new PC so slow at startup?

  - by rumtscho

  Bought a new PC this weekend, and it works really good. Only I have one big problem: startup time. Its BIOS needs 62 sec to load, then from Grub start to pw entering screen it's another 26 sec. I think this is a lot, because my old PC needs 34 sec for BIOS and another 8 sec to pw screen. After I enter the pw, the desktop is usable with practically no delay on both. The new PC is a core i7-930, running a Lucid Lynx 64 bit from a Intel Postville SSD (no internal HDs). The old PC is a Pentium 4 celeron (forgot the clock speed) running a Lucid Lynx 32 bit from an ATA 100 hard drive. Neither PC is overclocked. The new one has boot sequence 1.DVD ROM, 2.SSD (connected over SATA in AHCI mode), 3. removable drive. The old one boots from 1. DVD ROM, 2. HDD, 3. Floppy. Neither has a second OS installed. The new one has less software installed than the old one (I think), but the boot time difference was noticeable even before I made any installs. As far as I know, just the SSD should be enough to make a noticeable difference in boot time. I thought that having a good mainboard on the new PC as opposed to the basic office model on the old one would also mean a faster loading BIOS. If these assumptions are right, I guess I must have misconfigured something in the BIOS of the new PC. How should I configure it for a fast boot? It has an ASUS P6X58D board with an AMI BIOS, if you need the BIOS revision number I could post that too.

  Read the article

< Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >