Search Results

Search found 20684 results on 828 pages for 'ad hoc network'.

Page 443/828 | < Previous Page | 439 440 441 442 443 444 445 446 447 448 449 450  | Next Page >

• Prevent Linux from processing incoming ICMP Host unreachable packets

  - by bbc

  I have a test setup with one host on a network (10.1.0.0/16) talking via TCP to another one on another network (10.2.0.0/16) and a gateway in the middle. Sometimes, the TCP connection is lost and while scanning the trace (pcap), I looks like it's because of just one ICMP Host unreachable message sent by the gateway to 10.1.0.1 at some point. 10.1.0.1 then sends a TCP RST to 10.2.0.1. In my opinion, the gateway (pfSense) is broken or not configured correctly but anyway, for testing purposes, I'd like to block this kind of ICMP on the host (10.1.0.1) before it has an influence on my TCP connection (or does it? I'm not even sure). I've tried iptables: iptables -I INPUT -i eth0 -p icmp --icmp-type host-unreachable -j DROP but while it does a good job at preventing userpace applications like ping from receiving these ICMP messages, my TCP connection still comes to an end when the alleged "killer ICMP packet" is sent by the gateway. Am I right about how it is processed? If yes, then what can I do to achieve my goal?

  Read the article

• What does SQL Server's BACKUPIO wait type mean?

  - by solublefish

  I'm using Sql Server 2008 ("R1"), with some maintenance plans that back up my databases to a network share. Some of my backup jobs show long waits of type "BACKUPIO". Of course it seems like this is an I/O subsystem limitation, but I'm skeptical. Perfmon stats for I/O on the production (source) server are well within normal trends for that server. The destination server shows a sustained 7MB/s write rate, which seems incredibly low, even for a slow disk. The network link is gigabit ethernet and nowhere near saturated. The few docs I've turned up about BACKUPIO indicate that it's not specifically a wait on I/O, surprisingly enough. This MSFT doc says it's abnormal unless you're using a tape drive, which I'm not. But it doesn't say (or I don't understand) exactly what resource is missing. http://www.docstoc.com/docs/24580659/Performance-Tuning-in-SQL-Server-2005 And this piece says it's not related to I/O performance at all. http://www.informit.com/articles/article.aspx?p=686168&seqNum=5 "Note that BACKUPIO and IO_AUDIT_MUTEX are not related to IO performance." Anyway, does anyone know what BACKUPIO actually means and/or what I can do to diagnose or eliminate it?

  Read the article

• How can I access user files on a disk moved from a Windows 7 machine to an XP machine?

  - by Fantius

  I moved the hard drive from one machine (Win 7) to another (XP) and now certain folders tell me "Access denied". I am logged in as an administrator. I had a different account on the other machine. Neither account authenticated to anything besides the local machine. The old machine is apparently dead, so I can't do anything in there like change permissions, etc. How can I access these files? Edit: After changing the ownerships of all the files and folders on the drive, I am getting a different error. And it is troubling me deeply. "xxx refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location." No change after rebooting. Any ideas? Surely the files are still there, right?

  Read the article

• How to set up Windows 7 Professional as a NAS

  - by Enyalius

  I searched and didn't find any answers, so please forgive me if this is a repeat. Anyway, I have an older computer that I'm using as an HTPC, and I was hoping that I could use it as a NAS/multimedia server, as well. My primary uses would include accessing content on my PS3 (same LAN), accessing content from other computers on my home network and (if I can) accessing content from my Android phone over the internet. I have used SubSonic to stream music to my Android phone and other computers before, but I would really like to find a way to do this natively if possible. I know that I can buy external hard disk cases that can plug in the USB port of my router, that I can get a Drobo or other network storage solution, but I would really just rather not spend the money (especially considering that I already have a computer that I should be able to use). Hardware involved: Apple AirPort Extreme base station router (most recent revision) Home Theater Personal Computer: Core 2 Duo @ 2.4GHz, 8GB DDR2 RAM, ~3.5TB hard drive space Sony Playstaiton 3 Thin 120GB HTC Thunderbolt (I have 4G coverage) rooted and running Android 2.2.1 Various Apple laptops Various Windows 7 desktops/laptops Thanks in advance! Note- I have looked at open source NAS software but I would like to preserve the Windows Media Center functionality in Windows 7, so other NAS software is not an option for me currently. .

  Read the article

• What is the character used to indent the Make file rule recipe?

  - by goldenmean

  Hi, I am using gnu make and in a Makefile I have, I see below rule. I want to add a similar rule with a recipe, but when I add a rule and its receipe on the next line by giving a tab or space for the recipe, I get make error. dummy : @echo $(OBJS) When i turned on the vim command :set list , i see: dummy :$ ^I@echo $(OBJS)$ What exactly are the characters before the recipe line(second line) which indent it from the start of line? How do I enter them using keyboard (without having to copy paste the exisitng rule and then modifying it? Where would I find information for various spaces/indents to be used in creating a Makefile from beginning, by hand(Not a automake/or other tool created makefile)? thanks, -AD.

  Read the article

• Cross subnet connection [closed]

  - by user30472

  My internal Windows 2008 AD network is 172.20.xxx.xxx My Apple Wireless base stations only allows DHCP 172.16.xxx.xxx Private IP address ranges: 10.0.0.0 to 10.255.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255 The problem: The internet works from my IPad that has a 172.16.xxx.xxx address, but I can't access (browse) my tools server that is 172.20.xxx.xxx that host my Filemaker database. Is it possible to add 172.16.xxx.xxx range somewhere in DHCP or DNS on my Windows domain server so I can access tools? Or is there another way to make this connection work? Thanks

  Read the article

• linux shutdown hang with wifi cifs mounts

  - by Sirex

  Since fedora 15 (and now with 16) it seems that wireless clients take a long while to shutdown when they have network filesystems mounted at shutdown time. I've pushed out a cifs mount via puppet, and all clients have it, including those on wireless. If say a laptop is on a wired connection it shuts down just fine, but if its on the wifi at the time (and no wired connection) it'll hang at the fedora f logo. I'm not sure if its indefinite or just a really long while, but ill give it a test when i shut this machine down in a second. Needless to say its pretty annoying, so is there a way of causing the machine to shutdown even if network connectivity has been lost at unmount time, -- or an official way to reorder events so the wireless card is kept up until after the unmount happens during the shut down process (short of writing a custom script for shutdowns which is a bit of a kludge) ? It does this on multiple machines, and all started doing it when we went from fedora 14 to 15. It was such an obvious issue i'd kind of assumed someone must have reported it or there was an easy fix, but i've not discovered anything yet. Additional info: I can confirm that manually unmounting the mounts then shutting down (sudo shutdown or the xfce shutdown button) will shutdown just fine, it only hangs if the mounts are still mounted The puppet config that sets the mount looks like this (now with the _netdev entry that is indeed pushed to clients successfully, but makes no difference): file { "/mnt/share": ensure = directory,} mount { "/mnt/share": atboot = true, ensure = mounted, remounts = false, fstype = cifs, device = "//srv/share", options = "user,gid=shareusers,uid=${user},file_mode=0700,dir_mode=0700,credentials=/root/.smbcreds,_netdev", require = [ File["/mnt/share"], Group["shareusers"] ], } }

  Read the article

• Website hosted on my virtualbox web server not displaying images or applying css when viewed through phone

  - by WebweaverD

  I would really appreciate it if someone could help me. Please let me know if you need more info in the comments. My Set Up I have a windows 7 pc. On it I run a virtual box VM with a ubuntu 12 guest os and LAMP setup. I share files between the two machines using samba from linux to windows and using windows file sharing (Workgroup) the other way round. The vm is set up with a bridged network adapter and can happily serve web pages to my host machine. I use DHCP reservations on my home wireless router/modem to reserve an ip for the vm and give it a sitename.dev in my windows host file so I can access it at sitename.dev through the browser. The Problem So far so good but I have a dev project which needs a lot of mobile template development, now obviously I can use a browser plugin to simulate a mobile device but I would like to be able to see the real thing easily on my phone during development. So ideally I would like a similar setup on my iphone to my windows setup Now I'm not great on networking and dont have much experience with web server set up. So when I typed the ip of my virtual box into my iphone i wasnt expecting to see anything. I was pleasantly surprised when my site loaded up. The javascript even seems to be running but the images and css are not happening. My Question 1) What is happening here, is it something to do with the bridged set up on the vm network? 2)How do I make the sites load properly through my phone Notes I've also tried another phone. The same sites viewed on live servers work fine.

  Read the article

• Configuring two nearby WLANs: should I use the same ssid?

  - by Rory

  I'm configuring a home network for basic internet use (ie don't really need connectivity between workstations on the network). My brick walls mean a single wireless router doesn't provide good coverage throughout the house, so I have purchased two powerline adapters and now have the incoming modem/wireless router at one end of the house plugged into a powerline adapter, and at the other end of the house the other powerline adapter plugged into another wireless router. Currently the two wireless networks have different ssids. (The powerline adapters only do power-Ethernet; they're not wireless access points themselves.) This works well, except when I move between rooms and would ideally like my devices (iPad, phones, laptops) to switch from the weak to the strong signal. Sometimes there's enough signal that they hold on to the weak connects instead of switching to the strong one. Should I name the two networks the same ssid, and if so what is the actual effect? Do the signals get confused, is the bandwidth affected, will this help my devices seamlessly move from one to the other, or is the ssid just a cosmetic thing that actually doesn't have any impact on this situation? Are there any other settings that I should configure to make my setup optimal?

  Read the article

• Hard Disk based storage library

  - by Ryan M.

  We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

  Read the article

• Simplification of Apache+Subversion multidirectory configuration

  - by Reinderien

  Hello. With your excellent advice, I've finally pieced together this functional Apache configuration for my Subversion service: # Macro to make an SVN repo set <Macro SVNDir $user> <Location /svn/$user> # Mandatory HTTPS, log in using Active Domain SSLRequireSSL AuthPAM_Enabled on AuthType Basic AuthBasicAuthoritative off AuthName "PAM" Require user AD\$user # Needed to squash spurious error messages AuthUserFile /dev/null # SVN stuff DAV svn SVNParentPath /var/www/svn/$user </Location> </Macro> # List of accounts Use SVNDir user1 Use SVNDir user2 # ... It works, but it isn't optimal. I'd like to somehow redo this so that it can just scan the list of directories in /var/www/svn and automatically do this for each of them. Is that possible? Thanks.

  Read the article

• Cant configure DNS properly on centos

  - by Nuker

  I am on a VPS i must manage my own. I have network problems because in the last days many of my users report they cant enter my site from my domain and seems like Google and Facebook cant either (this never happened before). However i can enter my site without problems and so many other people as well. So i tested by making a php include like this <?php include 'http://mysite.com/somepage.php'; ?> and i get this error: Warning: include(): php_network_getaddresses: getaddrinfo failed: Name or service not known in I even tried by including content from yahoo.com or facebook and didnt work either. However the includes will work if i use IPs instead of domains. Do i have a DNS problem or something? What can i do to fix it? Im on a Linux 2.6.32-431.11.2.el6.x86_64 on x86_64 CentOS Linux 6.5 I have this on my resolv.conf # Generated by NetworkManager # No nameservers found; try putting DNS servers into your # ifcfg files in /etc/sysconfig/network-scripts like so: # # DNS1=xxx.xxx.xxx.xxx # DNS2=xxx.xxx.xxx.xxx # DOMAIN=lab.foo.com bar.foo.com nameserver 8.8.8.8 nameserver 8.8.4.4 Thank you.

  Read the article

• Getting dwl-g122 to work on ubuntu

  - by User1

  I have a USB WiFi adapter, D-Link dwl-g122. I'm running Ubuntu 10.4. My laptop has a built-in wireless card that is connecting fine to the router. I plug in the usb and it never really connects. Here are some details: iwconfig wlan1 IEEE 802.11bg ESSID:"\x0B\xE1..." Mode:Managed Frequency:2.457 GHz Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on lshw -c network: *-network:1 description: Wireless interface physical id: 3 logical name: wlan1 serial: 00:13:46:8b:xx:xx capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg dmesg [ 1096.814176] wlan1: direct probe to AP xxx (try 1) [ 1096.820960] wlan1: direct probe responded [ 1096.820969] wlan1: authenticate with AP xxx (try 1) [ 1096.823790] wlan1: authenticated [ 1096.823869] wlan1: associate with AP xxx (try 1) [ 1096.827667] wlan1: RX AssocResp from xxx (capab=0x411 status=0 aid=1) [ 1096.827674] wlan1: associated [ 1142.590912] wlan1: deauthenticating from xxx by local choice (reason=3) lsmod|rt2 rt2500usb 19643 0 rt2x00usb 11260 1 rt2500usb rt2x00lib 32133 2 rt2500usb,rt2x00usb mac80211 238896 3 ath5k,rt2x00usb,rt2x00lib cfg80211 148725 4 ath5k,ath,rt2x00lib,mac80211 led_class 3764 3 ath5k,rt2x00lib,sdhci It looks like the driver loads but it doesn't feel like connecting. The behavior is identical even if I blacklist the other wifi card (using an ath5k driver). It's almost like it is using the wrong password or something. Does anyone know what is happening? Is anyone using Ubuntu successful?

  Read the article

• Can not find the source of Grant permission on a folder

  - by Konrads

  I have a security mystery :) Effective permissions tab shows that a few sampled users (IT ops) have any and all rights (all boxes are ticked). The permissions show that Local Administrators group has full access and some business users have too of which the sampled users are not members of. Local Administrators group has some AD IT Ops related groups of which the sampled users, again, appear not be members. The sampled users are not members of Domain Administrators either. I've tried tracing backwards (from permissions to user) and forwards (user to permission) and could not find anything. At this point, there are two options: I've missed something and they are members of some groups. There's another way of getting full permissions. Effective Permissions are horribly wrong. Is there a way to retrieve the decision logic of Effective Permissions? Any hints, tips, ideas?

  Read the article

• what are these weird IP address connections in resource monitor?

  - by bill

  I decided to check out Resource Monitor (on the 'Performance' tab in Task Manager, Windows 7) and I noticed in the "Network" section that the 'System' image name kept making a bunch (~5 at a time) of connections to random IP addresses, it would show anywhere from 1-500 bytes/sec 'sent'. They would stay connected for 1-2 minutes. -All web browsers are closed So, first thing I did was run a trace from network-tools.com on some of these IP addresses. 8/10 were outside of US and did not resolve to any host name. Of the 10 IP addresses I traced, 2 were in US, 4 showed origins in China, and one each to Algeria, Russia, Pakistan, Korea. (!) So, the next thing I did was turn off my wireless card, watch the connections disappear, then turn the card back on, and within 30 seconds more random connections were created by System, with different IP addresses from the first time. The next thing I did was go open Task Manager, Show Processes From All Users, then I killed just about everything that wasn't (what appeared to be) a windows process. Turned on wi-fi, and again within 30 seconds, random IP addresses connect for ~ 1 min at a time, new ones coming and going. I occasionally use bit torrent on this machine, but there was definitely no process that seemed related to bt running after I went through task manager, and bt wasn't open to begin with. So, any ideas on what these connections might be for? I have been using Ad-Aware Free and AVG Free on this computer for a while now, always up to date..

  Read the article

• IIS App Pool Identity Internet Settings

  - by Programming Hero

  How does an IIS App Pool determine its Internet Settings? I'm specifying a custom identity under which to host a .NET web application, a service account that is part of our Active Directory domain. When the application runs, it needs to make HTTP requests to other servers. This action causes it to read web and proxy settings from some location, but I can't understand where it goes for this information. Does it look: At the default account's settings on that box? At the default profile on the AD server? Its own local/roaming profile? A combination of the above? Somewhere completely different?

  Read the article

• How to allow a single domain name with iptables

  - by Claw

  I am looking for a way to make iptables only accept requests for my domain name and reject the others. Lately I misconfigured my apache proxy, it is now fixed, but I keep receiving a load of requests looking like that : xxxx.xx:80 142.54.184.226 - - [12/Sep/2012:15:25:14 +0200] "GET http://ad.bharatstudent.com/st?ad_type=iframe&ad_size=700x300&section=3011105&pub_url=${PUB_URL} HTTP/1.0" 200 4985 "http://www.gethealthbank.com/category/medicine/" "Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 4.0)" xxxx.xx:80 199.116.113.149 - - [12/Sep/2012:15:25:14 +0200] "GET http://mobile1.login.vip.ird.yahoo.com/config/pwtoken_get?login=heaven_12_&src=ntverifyint&passwd=7698ca276acaf6070487899ad2ee2cb9&challenge=wTBYIo2AEdMFr6LtdyQZPqYw9FS9&md5=1 HTTP/1.0" 200 425 "-" "MobileRunner-J2ME" which I would like to block. How can I manage this ?

  Read the article

• wireless to wired internet

  - by Mark T

  My wife uses an old computer which doesn't really like having an internet connection via a USB wireless adapter. I've tried several, and none have been satisfactory. The connection gets dropped often and it is frustrating for her. A wireless card also had the same trouble. Repositioning the computer made no difference. (Two laptops, nearby, connect just fine and stay up, so it isn't the router.) However, the computer always worked well when I had an Ethernet cable connected to it. I know there is a box which will connect to my wireless network and provide an Ethernet cable connection. But the terminology used is so complex, I can't tell what it is I really need. In case that wasn't clear, here it is in different words: What I need is just the opposite of a wireless router. My wireless router takes my cable modem's Ethernet connection and makes it available to wireless clients. What I want is a box which is a wireless client to my wireless router and provides an Ethernet cable connection that I can connect to any device. I need to know the right name for a box with such capabilities. If you know of some inexpensive examples, that would also be helpful. I'm running a wireless G network with a Linksys Router.

  Read the article

• How To Send Email to Active Directory Group?

  - by BGM

  Salvete! I have two servers, one hosts my email server (hMailServer on windows server 2003) and the other hosts active directory (on windows server 2008). I don't have Microsoft Exchange. In Active directory, there are user groups that have email addresses. How can I send an email to a user group? Somewhere I need to be able to connect my mail server to active directory. Maybe AD has a mail pickup folder? I can't find the information that I need. Here is a similar link, but it didn't help me. Send As Distribution Group Email Address? (I think a tag for hMailServer would be a good idea.) Thanks for y'all's help.

  Read the article

• Video/Image processing on Apple iPhone4 [closed]

  - by goldenmean

  Hello, I know apple iPhone4 support H.264 and MPEG-4 as the supported video codecs, and JPEG,M-JPEG as image codecs. I was looking to get some information on Apple iPhone4 Video, Image Codec and Processing Chips/SoC parts. 1] Does anyone know, Which vendor provides the SoC's to enable this image / video compression and processing solutions in iPhone4. 2] Are the video/image codec solutions - 'Software codecs' on a specialized dsp-core/processor or hard wired as in a FPGA/ASIC solution. Any pointers would be useful. thank you. -AD.

  Read the article

• Routing WIFI and LAN for specific traffic

  - by jakebird451

  I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing.

  Read the article

• How best to handle end user notification in the event of system failure incl. email?

  - by BrianLy

  I've been asked to research ways of handling end user notifications when systems such as email are experiencing problems. Perhaps an example will make this a little clearer. We have a number of sites in different countries. Recently email was impacted at one of the sites, but it could have been a complete network outage. Information was provided by phone to local IT managers at the site but onward communication was slower than some would have liked. It seems like almost everyone at the site has a personal mobile phone which could receive text messages, and perhaps access a remote website with postings on the situation. However managing and supporting a system to text people on these relatively infrequent occasions would be very costly to do internally. What are other people doing to handle situations like this? Some things I've thought of include: Database of phone numbers to text. Seems costly and not very easy to maintain for an already stretched IT group. Is there an external service that would let you do this policies? Send voicemail message to all phones on site. Maintain an external website. This would not work in all situations (network failure), and there is a limit on the amount of info that can be posted externally. A site outage could be sensitive information in some situations. How could the site be password protected? Maybe OpenId/Facebook connect would work. Use a site like Yammer.com which is publicly accessible but only by people with a company email address. Anyone using this for IT outage notifications? To me it looks like there is no clear answer, and that there are solutions for some subsets of users. To be comprehensive a number of solutions would need to be combined. Any additional thoughts or recommendations? What worked or didn't work for your organization?

  Read the article

• Elevating UAC via .bat file?

  - by jslaker

  Pretty straightforward one that I'm having trouble finding an answer to. serverfault previously helped me with finding a way to automate Windows updates without using WSUS. It's working fantastically, but to run it over the network, you have to first mount a shared drive. That's pretty simple XP since you just mount the drive and run the updater. On Vista and W7, though, this all has to be done with elevated privileges to work correctly. The UAC account can't see network drives mounted by the regular user, so in order to get everything working, I have to mount the share via net use from an escalated shell. I'd like to automate mounting this share and launching the updater via a simple .bat file. I could probably just instruct everybody to right click "Run as Administrator" on the .bat file, but I'd like to keep things as simple as possible and have the .bat automatically prompt the user to escalate their privileges. Since these computers don't belong to us, I can't count on anything like Powershell being installed, so that rules any solution along those lines out and pretty much have to rely on things that would be included in an RTM Vista install. I'm hoping I'm mostly missing something obvious here. :)

  Read the article

• iPhone 3G can't see any WiFi networks, ever

  - by torbengb

  I've got WiFi turned on in the settings, and ask before connect turned off. My iPhone 3G should see several WiFi networks, but it lists none. It also does not list my own network, which my computers see just fine. It has worked earlier but stopped working recently (possibly because of or at the same time of other trouble (which a restore solved)). The iPhone is not jailbroken. The SSID is not hidden, uses WPA2. It also finds no WiFi networks when I'm at a friend's house. His iPhone 2G sees several WiFi networks, including his own. When I use the manual entry method, specifying my home SSID and the proper WPA2 passkey, then click join, the iPhone says couldn't find that network. Same at my friend's place, with his SSID and passkey. I've just backed up my iPhone, then restored it, to see if refreshing the firmware would help. It didn't change anything. Is my iPhone broken? How can I fix this?

  Read the article

• How to setup bindings for development IIS 7.5 with lot of sites

  - by Antonio Bakula

  I am a programmer in a small ASP.NET shop with very little expirience in server administration, and I have to setup IIS 7.5 to host lot of sites on newly installed windows server 2008 R2, these sites are test "clones" for sites on "real" web server and they should be accessible only in local network (domain). Developers should add new sites for our new customers. Project managers use this server to check progress and test new sites and new features, QA people have to have access to this site and test before we copy it to the "real" web server. Developers only have access to IIS console, in fact they can use RDP to test server with their developer domain credentials and permissions, also developers are local admins on that machine (tester). On our previous server I used different port numbers for each site. That worked but don't like this solution, I would prefer to use subdomains. But here are the problems: manually adding DNS records is not an option because we do not wont that developers have to administer domain DNS server, and currently this had to be done with domain administrator credentials. Is there a some way to add DNS record automatically ? I tried to add DNS record for subdomains on test server with wildcard (*.tester) and that seems to work for some time but that change coused some bad problems in our domain network and admin forbid me to mess with DNS, he said that I have to add DNS record for every subdomain manually and that I can not use wildcards, and there is nothing that I can do about it, mainly for "politicall" reasons :( obviously our admin is pretty much uncooperative, outsorced from different organization and I can't do anything about that. can I add another DNS server on that machine ? What must be setup on clients machines to "tell" them to use domain DNS server and tester domain server ? So please I need someone to give me some advice, what should I do ? Is different port numbers only option left ? Thanks !

  Read the article

< Previous Page | 439 440 441 442 443 444 445 446 447 448 449 450  | Next Page >