optical drive - Page 445

Selling Federal Enterprise Architecture (EA)

- by TedMcLaughlan

Selling Federal Enterprise Architecture A taxonomy of subject areas, from which to develop a prioritized marketing and communications plan to evangelize EA activities within and among US Federal Government organizations and constituents. Any and all feedback is appreciated, particularly in developing and extending this discussion as a tool for use – more information and details are also available. "Selling" the discipline of Enterprise Architecture (EA) in the Federal Government (particularly in non-DoD agencies) is difficult, notwithstanding the general availability and use of the Federal Enterprise Architecture Framework (FEAF) for some time now, and the relatively mature use of the reference models in the OMB Capital Planning and Investment (CPIC) cycles. EA in the Federal Government also tends to be a very esoteric and hard to decipher conversation – early apologies to those who agree to continue reading this somewhat lengthy article. Alignment to the FEAF and OMB compliance mandates is long underway across the Federal Departments and Agencies (and visible via tools like PortfolioStat and ITDashboard.gov – but there is still a gap between the top-down compliance directives and enablement programs, and the bottom-up awareness and effective use of EA for either IT investment management or actual mission effectiveness. "EA isn't getting deep enough penetration into programs, components, sub-agencies, etc.", verified a panelist at the most recent EA Government Conference in DC. Newer guidance from OMB may be especially difficult to handle, where bottom-up input can't be accurately aligned, analyzed and reported via standardized EA discipline at the Agency level – for example in addressing the new (for FY13) Exhibit 53D "Agency IT Reductions and Reinvestments" and the information required for "Cloud Computing Alternatives Evaluation" (supporting the new Exhibit 53C, "Agency Cloud Computing Portfolio"). Therefore, EA must be "sold" directly to the communities that matter, from a coordinated, proactive messaging perspective that takes BOTH the Program-level value drivers AND the broader Agency mission and IT maturity context into consideration. Selling EA means persuading others to take additional time and possibly assign additional resources, for a mix of direct and indirect benefits – many of which aren't likely to be realized in the short-term. This means there's probably little current, allocated budget to work with; ergo the challenge of trying to sell an "unfunded mandate". Also, the concept of "Enterprise" in large Departments like Homeland Security tends to cross all kinds of organizational boundaries – as Richard Spires recently indicated by commenting that "...organizational boundaries still trump functional similarities. Most people understand what we're trying to do internally, and at a high level they get it. The problem, of course, is when you get down to them and their system and the fact that you're going to be touching them...there's always that fear factor," Spires said. It is quite clear to the Federal IT Investment community that for EA to meet its objective, understandable, relevant value must be measured and reported using a repeatable method – as described by GAO's recent report "Enterprise Architecture Value Needs To Be Measured and Reported". What's not clear is the method or guidance to sell this value. In fact, the current GAO "Framework for Assessing and Improving Enterprise Architecture Management (Version 2.0)", a.k.a. the "EAMMF", does not include words like "sell", "persuade", "market", etc., except in reference ("within Core Element 19: Organization business owner and CXO representatives are actively engaged in architecture development") to a brief section in the CIO Council's 2001 "Practical Guide to Federal Enterprise Architecture", entitled "3.3.1. Develop an EA Marketing Strategy and Communications Plan." Furthermore, Core Element 19 of the EAMMF is advised to be applied in "Stage 3: Developing Initial EA Versions". This kind of EA sales campaign truly should start much earlier in the maturity progress, i.e. in Stages 0 or 1. So, what are the understandable, relevant benefits (or value) to sell, that can find an agreeable, participatory audience, and can pave the way towards success of a longer-term, funded set of EA mechanisms that can be methodically measured and reported? Pragmatic benefits from a useful EA that can help overcome the fear of change? And how should they be sold? Following is a brief taxonomy (it's a taxonomy, to help organize SME support) of benefit-related subjects that might make the most sense, in creating the messages and organizing an initial "engagement plan" for evangelizing EA "from within". An EA "Sales Taxonomy" of sorts. We're not boiling the ocean here; the subjects that are included are ones that currently appear to be urgently relevant to the current Federal IT Investment landscape. Note that successful dialogue in these topics is directly usable as input or guidance for actually developing early-stage, "Fit-for-Purpose" (a DoDAF term) Enterprise Architecture artifacts, as prescribed by common methods found in most EA methodologies, including FEAF, TOGAF, DoDAF and our own Oracle Enterprise Architecture Framework (OEAF). The taxonomy below is organized by (1) Target Community, (2) Benefit or Value, and (3) EA Program Facet - as in: "Let's talk to (1: Community Member) about how and why (3: EA Facet) the EA program can help with (2: Benefit/Value)". Once the initial discussion targets and subjects are approved (that can be measured and reported), a "marketing and communications plan" can be created. A working example follows the Taxonomy. Enterprise Architecture Sales Taxonomy Draft, Summary Version 1. Community 1.1. Budgeted Programs or Portfolios Communities of Purpose (CoPR) 1.1.1. Program/System Owners (Senior Execs) Creating or Executing Acquisition Plans 1.1.2. Program/System Owners Facing Strategic Change 1.1.2.1. Mandated 1.1.2.2. Expected/Anticipated 1.1.3. Program Managers - Creating Employee Performance Plans 1.1.4. CO/COTRs – Creating Contractor Performance Plans, or evaluating Value Engineering Change Proposals (VECP) 1.2. Governance & Communications Communities of Practice (CoP) 1.2.1. Policy Owners 1.2.1.1. OCFO 1.2.1.1.1. Budget/Procurement Office 1.2.1.1.2. Strategic Planning 1.2.1.2. OCIO 1.2.1.2.1. IT Management 1.2.1.2.2. IT Operations 1.2.1.2.3. Information Assurance (Cyber Security) 1.2.1.2.4. IT Innovation 1.2.1.3. Information-Sharing/ Process Collaboration (i.e. policies and procedures regarding Partners, Agreements) 1.2.2. Governing IT Council/SME Peers (i.e. an "Architects Council") 1.2.2.1. Enterprise Architects (assumes others exist; also assumes EA participants aren't buried solely within the CIO shop) 1.2.2.2. Domain, Enclave, Segment Architects – i.e. the right affinity group for a "shared services" EA structure (per the EAMMF), which may be classified as Federated, Segmented, Service-Oriented, or Extended 1.2.2.3. External Oversight/Constraints 1.2.2.3.1. GAO/OIG & Legal 1.2.2.3.2. Industry Standards 1.2.2.3.3. Official public notification, response 1.2.3. Mission Constituents Participant & Analyst Community of Interest (CoI) 1.2.3.1. Mission Operators/Users 1.2.3.2. Public Constituents 1.2.3.3. Industry Advisory Groups, Stakeholders 1.2.3.4. Media 2. Benefit/Value (Note the actual benefits may not be discretely attributable to EA alone; EA is a very collaborative, cross-cutting discipline.) 2.1. Program Costs – EA enables sound decisions regarding... 2.1.1. Cost Avoidance – a TCO theme 2.1.2. Sequencing – alignment of capability delivery 2.1.3. Budget Instability – a Federal reality 2.2. Investment Capital – EA illuminates new investment resources via... 2.2.1. Value Engineering – contractor-driven cost savings on existing budgets, direct or collateral 2.2.2. Reuse – reuse of investments between programs can result in savings, chargeback models; avoiding duplication 2.2.3. License Refactoring – IT license & support models may not reflect actual or intended usage 2.3. Contextual Knowledge – EA enables informed decisions by revealing... 2.3.1. Common Operating Picture (COP) – i.e. cross-program impacts and synergy, relative to context 2.3.2. Expertise & Skill – who truly should be involved in architectural decisions, both business and IT 2.3.3. Influence – the impact of politics and relationships can be examined 2.3.4. Disruptive Technologies – new technologies may reduce costs or mitigate risk in unanticipated ways 2.3.5. What-If Scenarios – can become much more refined, current, verifiable; basis for Target Architectures 2.4. Mission Performance – EA enables beneficial decision results regarding... 2.4.1. IT Performance and Optimization – towards 100% effective, available resource utilization 2.4.2. IT Stability – towards 100%, real-time uptime 2.4.3. Agility – responding to rapid changes in mission 2.4.4. Outcomes –measures of mission success, KPIs – vs. only "Outputs" 2.4.5. Constraints – appropriate response to constraints 2.4.6. Personnel Performance – better line-of-sight through performance plans to mission outcome 2.5. Mission Risk Mitigation – EA mitigates decision risks in terms of... 2.5.1. Compliance – all the right boxes are checked 2.5.2. Dependencies –cross-agency, segment, government 2.5.3. Transparency – risks, impact and resource utilization are illuminated quickly, comprehensively 2.5.4. Threats and Vulnerabilities – current, realistic awareness and profiles 2.5.5. Consequences – realization of risk can be mapped as a series of consequences, from earlier decisions or new decisions required for current issues 2.5.5.1. Unanticipated – illuminating signals of future or non-symmetric risk; helping to "future-proof" 2.5.5.2. Anticipated – discovering the level of impact that matters 3. EA Program Facet (What parts of the EA can and should be communicated, using business or mission terms?) 3.1. Architecture Models – the visual tools to be created and used 3.1.1. Operating Architecture – the Business Operating Model/Architecture elements of the EA truly drive all other elements, plus expose communication channels 3.1.2. Use Of – how can the EA models be used, and how are they populated, from a reasonable, pragmatic yet compliant perspective? What are the core/minimal models required? What's the relationship of these models, with existing system models? 3.1.3. Scope – what level of granularity within the models, and what level of abstraction across the models, is likely to be most effective and useful? 3.2. Traceability – the maturity, status, completeness of the tools 3.2.1. Status – what in fact is the degree of maturity across the integrated EA model and other relevant governance models, and who may already be benefiting from it? 3.2.2. Visibility – how does the EA visibly and effectively prove IT investment performance goals are being reached, with positive mission outcome? 3.3. Governance – what's the interaction, participation method; how are the tools used? 3.3.1. Contributions – how is the EA program informed, accept submissions, collect data? Who are the experts? 3.3.2. Review – how is the EA validated, against what criteria? Taxonomy Usage Example: 1. To speak with: a. ...a particular set of System Owners Facing Strategic Change, via mandate (like the "Cloud First" mandate); about... b. ...how the EA program's visible and easily accessible Infrastructure Reference Model (i.e. "IRM" or "TRM"), if updated more completely with current system data, can... c. ...help shed light on ways to mitigate risks and avoid future costs associated with NOT leveraging potentially-available shared services across the enterprise... 2. ....the following Marketing & Communications (Sales) Plan can be constructed: a. Create an easy-to-read "Consequence Model" that illustrates how adoption of a cloud capability (like elastic operational storage) can enable rapid and durable compliance with the mandate – using EA traceability. Traceability might be from the IRM to the ARM (that identifies reusable services invoking the elastic storage), and then to the PRM with performance measures (such as % utilization of purchased storage allocation) included in the OMB Exhibits; and b. Schedule a meeting with the Program Owners, timed during their Acquisition Strategy meetings in response to the mandate, to use the "Consequence Model" for advising them to organize a rapid and relevant RFI solicitation for this cloud capability (regarding alternatives for sourcing elastic operational storage); and c. Schedule a series of short "Discovery" meetings with the system architecture leads (as agreed by the Program Owners), to further populate/validate the "As-Is" models and frame the "To Be" models (via scenarios), to better inform the RFI, obtain the best feedback from the vendor community, and provide potential value for and avoid impact to all other programs and systems. --end example -- Note that communications with the intended audience should take a page out of the standard "Search Engine Optimization" (SEO) playbook, using keywords and phrases relating to "value" and "outcome" vs. "compliance" and "output". Searches in email boxes, internal and external search engines for phrases like "cost avoidance strategies", "mission performance metrics" and "innovation funding" should yield messages and content from the EA team. This targeted, informed, practical sales approach should result in additional buy-in and participation, additional EA information contribution and model validation, development of more SMEs and quick "proof points" (with real-life testing) to bolster the case for EA. The proof point here is a successful, timely procurement that satisfies not only the external mandate and external oversight review, but also meets internal EA compliance/conformance goals and therefore is more transparently useful across the community. In short, if sold effectively, the EA will perform and be recognized. EA won’t therefore be used only for compliance, but also (according to a validated, stated purpose) to directly influence decisions and outcomes. The opinions, views and analysis expressed in this document are those of the author and do not necessarily reflect the views of Oracle.

Read the article

Autounattend.xml not being recognized in VirtualBox

- by beagle

I am working my way through the steps on this page to prepare an unattended installation of Windows 7 Enterprise x64 for purposes of a college assignment which simply requires the process to be carried out and documented. Both the "technician" and "reference" computers are virtual machines created in VirtualBox 4.3.12, as will be the destination computer. I seem to have successfully completed Step 1, building an Autounattend.xml answer file using Windows System Image Manager, in as far as the answer file validates successfully. The problem arises when I try to install Windows on the reference machine from the DVD image in conjunction with the Autounattend file on a USB drive. I have tried a couple of different USB devices, and the devices themselves seem to be recognized, but the answer file does not, as instead of taking the configuration settings from the file the user interface appears as in a manual installation. Has anyone come across this problem or a solution? The xml created by Windows SIM is below for reference in case the problem is with the file itself. <?xml version="1.0" encoding="utf-8"?> <unattend xmlns="urn:schemas-microsoft-com:unattend"> <settings pass="oobeSystem"> <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <Reseal> <Mode>Audit</Mode> </Reseal> </component> <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <OOBE> <HideEULAPage>true</HideEULAPage> <ProtectYourPC>3</ProtectYourPC> </OOBE> </component> </settings> <settings pass="windowsPE"> <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <SetupUILanguage> <UILanguage>en-IE</UILanguage> </SetupUILanguage> <InputLocale>en-IE</InputLocale> <SystemLocale>en-IE</SystemLocale> <UILanguage>en-IE</UILanguage> <UserLocale>en-IE</UserLocale> </component> <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <DiskConfiguration> <Disk wcm:action="add"> <CreatePartitions> <CreatePartition wcm:action="add"> <Order>1</Order> <Size>300</Size> <Type>Primary</Type> </CreatePartition> <CreatePartition wcm:action="add"> <Order>2</Order> <Extend>true</Extend> <Type>Primary</Type> </CreatePartition> </CreatePartitions> <ModifyPartitions> <ModifyPartition wcm:action="add"> <Active>true</Active> <Format>NTFS</Format> <Label>System</Label> <Order>1</Order> <PartitionID>1</PartitionID> </ModifyPartition> <ModifyPartition wcm:action="add"> <Format>NTFS</Format> <Label>Windows</Label> <Order>2</Order> <PartitionID>2</PartitionID> </ModifyPartition> </ModifyPartitions> <DiskID>0</DiskID> <WillWipeDisk>true</WillWipeDisk> </Disk> <WillShowUI>OnError</WillShowUI> </DiskConfiguration> <ImageInstall> <OSImage> <InstallTo> <DiskID>0</DiskID> <PartitionID>2</PartitionID> </InstallTo> <InstallToAvailablePartition>false</InstallToAvailablePartition> <WillShowUI>OnError</WillShowUI> </OSImage> </ImageInstall> <UserData> <ProductKey> <WillShowUI>OnError</WillShowUI> </ProductKey> <AcceptEula>true</AcceptEula> </UserData> </component> </settings> <settings pass="specialize"> <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <Home_Page>http://www.example.com</Home_Page> </component> </settings> <cpi:offlineImage cpi:source="wim://technician/users/user/desktop/install.wim#Windows 7 ENTERPRISE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />

Read the article

Metro apps crash on startup, driver or permissions issue?

- by Vee

After installing Win8 x64 RC, Metro apps worked correctly, but desktop OpenGL apps were slow and unresponsive. I installed the latest Win8 nVidia drivers, and the OpenGL apps started working correctly. At the same time, because of annoying permission messages, I changed the C:\ drive and all its files ownerships to my user, and gave it full permission. I restarted my pc after installing the drivers, and now Metro apps only show the splash screen, then crash. I tried installing other versions of the nVidia drivers, with the same result. My GPU is a GeForce GTX275. Is this a known problem with nVidia drivers? Or maybe changing the ownership of C:\ is the real problem? Thank you. More information (after looking in the event viewer) I've managed to find the problem and the error in the Event Viewer. I still cannot solve it. Here's the information I found by opening the Mail app and letting it crash: Log Name: Microsoft-Windows-TWinUI/Operational Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 15.54.17 Event ID: 5961 Task Category: (5961) Level: Error Keywords: User: VEE-PC\Vittorio Computer: vee-pc Description: Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail for the Windows.Launch contract failed with error: The app didn't start.. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>5961</EventID> <Version>0</Version> <Level>2</Level> <Task>5961</Task> <Opcode>0</Opcode> <Keywords>0x4000000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T13:54:17.472416600Z" /> <EventRecordID>6524</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="6756" /> <Channel>Microsoft-Windows-TWinUI/Operational</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="AppId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> <Data Name="ContractId">Windows.Launch</Data> <Data Name="ErrorCode">-2144927141</Data> </EventData> </Event> Found other stuff, this is another error that appears when opening a Metro app: Log Name: Application Source: ESENT Date: 07/06/2012 16.01.00 Event ID: 490 Task Category: General Level: Error Keywords: Classic User: N/A Computer: vee-pc Description: svchost (1376) SRUJet: An attempt to open the file "C:\Windows\system32\SRU\SRU.log" for read / write access failed with system error 5 (0x00000005): "Access is denied. ". The open file operation will fail with error -1032 (0xfffffbf8). Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="ESENT" /> <EventID Qualifiers="0">490</EventID> <Level>2</Level> <Task>1</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:01:00.000000000Z" /> <EventRecordID>11854</EventRecordID> <Channel>Application</Channel> <Computer>vee-pc</Computer> <Security /> </System> <EventData> <Data>svchost</Data> <Data>1376</Data> <Data>SRUJet: </Data> <Data>C:\Windows\system32\SRU\SRU.log</Data> <Data>-1032 (0xfffffbf8)</Data> <Data>5 (0x00000005)</Data> <Data>Access is denied. </Data> </EventData> </Event> After changing permissions again (adding Everyone and Creator Owner to System32), the "access denied to sru.log" error disappears, but this one appears in its place: Log Name: Application Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 16.16.34 Event ID: 2486 Task Category: (2414) Level: Error Keywords: (64),Process Lifetime Manager User: VEE-PC\Vittorio Computer: vee-pc Description: App microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail did not launch within its allotted time. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>2486</EventID> <Version>0</Version> <Level>2</Level> <Task>2414</Task> <Opcode>0</Opcode> <Keywords>0x2000000000000042</Keywords> <TimeCreated SystemTime="2012-06-07T14:16:34.616499600Z" /> <EventRecordID>11916</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="6996" /> <Channel>Application</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="ApplicationId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> </EventData> </Event> Now I'm stuck. It tells me "Activation of app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional information." but I can't find the Microsoft-Windows-TWinUI/Operational log. I'm starting a bounty. I found the TWinUI/Operational log. It only tells me: Log Name: Microsoft-Windows-TWinUI/Operational Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 16.28.57 Event ID: 5961 Task Category: (5961) Level: Error Keywords: User: VEE-PC\Vittorio Computer: vee-pc Description: Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail for the Windows.BackgroundTasks contract failed with error: The app didn't start.. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>5961</EventID> <Version>0</Version> <Level>2</Level> <Task>5961</Task> <Opcode>0</Opcode> <Keywords>0x4000000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:28:57.238140800Z" /> <EventRecordID>6536</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="2624" /> <Channel>Microsoft-Windows-TWinUI/Operational</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="AppId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> <Data Name="ContractId">Windows.BackgroundTasks</Data> <Data Name="ErrorCode">-2144927141</Data> </EventData> </Event> I need to go deeper. I found a forum thread that told me to look for "DCOM" errors. I found this one related to the app crash "The server Microsoft.WindowsLive.Mail.wwa did not register with DCOM within the required timeout." Log Name: System Source: Microsoft-Windows-DistributedCOM Date: 07/06/2012 16.46.45 Event ID: 10010 Task Category: None Level: Error Keywords: Classic User: VEE-PC\Vittorio Computer: vee-pc Description: The server Microsoft.WindowsLive.Mail.wwa did not register with DCOM within the required timeout. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" /> <EventID Qualifiers="0">10010</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:46:45.586943800Z" /> <EventRecordID>2763</EventRecordID> <Correlation /> <Execution ProcessID="804" ThreadID="2364" /> <Channel>System</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="param1">Microsoft.WindowsLive.Mail.wwa</Data> </EventData> </Event>

Read the article

Fedora 16 can connect to samba share using smbclient but not in nautilus 3.2.1

- by Nathan Jones

I have a machine running Ubuntu 11.10 Server acting as a Samba server to share my home directory. Everything works fine on my Windows 7 machine, but on my Fedora 16 laptop, if I use Nautilus to try to access the share using smb://192.168.0.8/nathan in the location bar, it just has the loading cursor and does nothing. It never shows any errors, nothing. Using smbclient works just fine, but I'd like to get it working in Nautilus. I know that there can be problems with SELinux and Samba, so I created a file called booleans.local that contains samba_enable_home_dirs=1. My smb.conf file looks like this: # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<[email protected]> for # sending the correct chat script for the passwd program in Debian Sarge). passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. pam password change = yes # This option controls how unsuccessful authentication attempts are mapped # to anonymous connections map to guest = bad user ########## Domains ########### # Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the 'domain master' setting to no # ; domain logons = yes # # The following setting only takes effect if 'domain logons' is set # It specifies the location of the user's profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory # (this is Samba's default) # logon path = \\%N\%U\profile # The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U # The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u # This allows machine accounts to be created on the domain controller via the # SAMR RPC pipe. # The following assumes a "machines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u # This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe. ; add group script = /usr/sbin/addgroup --force-badname %g ########## Printing ########## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this # load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 # socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & # Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. # domain master = auto # Some defaults for winbind (make sure you're not using the ranges # for something else.) ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash # The following was the default behaviour in sarge, # but samba upstream reverted the default because it might induce # performance issues in large organizations. # See Debian bug #368251 for some of the consequences of *not* # having this setting and smb.conf(5) for details. ; winbind enum groups = yes ; winbind enum users = yes # Setup usershare options to enable non-root users to share folders # with the net usershare command. # Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100 # Allow users who've been granted usershare privileges to create # public shares, not just authenticated ones usershare allow guests = yes #======================= Share Definitions ======================= # Un-comment the following (and tweak the other settings below to suit) # to enable the default home directory shares. This will share each # user's home director as \\server\username [homes] comment = Home Directories browseable = yes # By default, the home directories are exported read-only. Change the # next parameter to 'no' if you want to be able to write to them. read only = no # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ; create mask = 0775 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ; directory mask = 0775 # By default, \\server\username shares can be connected to by anyone # with access to the samba server. Un-comment the following parameter # to make sure that only "username" can connect to \\server\username # The following parameter makes sure that only "username" can connect # # This might need tweaking when using external authentication schemes valid users = %S # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; read only = yes # Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700 [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = no create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no # Uncomment to allow remote administration of Windows print drivers. # You may need to replace 'lpadmin' with the name of the group your # admin users are members of. # Please note that you also need to set appropriate Unix permissions # to the drivers directory for these users to have write rights in it ; write list = root, @lpadmin # A sample share for sharing your CD-ROM with others. ;[cdrom] ; comment = Samba server's CD-ROM ; read only = yes ; locking = no ; path = /cdrom ; guest ok = yes # The next two parameters show how to auto-mount a CD-ROM when the # cdrom share is accesed. For this to work /etc/fstab must contain # an entry like this: # # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 # # The CD-ROM gets unmounted automatically after the connection to the # # If you don't want to use auto-mounting/unmounting make sure the CD # is mounted on /cdrom # ; preexec = /bin/mount /cdrom ; postexec = /bin/umount /cdrom smbusers: <nathan> = <"nathan"> Any help would be very much appreciated! Thanks!

Read the article

Redmine install not working and displaying directory contents - Ubuntu 10.04

- by Casey Flynn

I've gone through the steps to set up and install the redmine project tracking web app on my VPS with Apache2 but I'm running into a situation where instead of displaying the redmine app, I just see the directory contents: Does anyone know what could be the problem? I'm not sure what other files might be of use to diagnose what's going on. Thanks! # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # Define an access log for VirtualHosts that don't define their own logfile CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ # Enable fastcgi for .fcgi files # (If you're using a distro package for mod_fcgi, something like # this is probably already present) #<IfModule mod_fcgid.c> # AddHandler fastcgi-script .fcgi # FastCgiIpcDir /var/lib/apache2/fastcgi #</IfModule> LoadModule fcgid_module /usr/lib/apache2/modules/mod_fcgid.so LoadModule passenger_module /var/lib/gems/1.8/gems/passenger-3.0.7/ext/apache2/mod_passenger.so PassengerRoot /var/lib/gems/1.8/gems/passenger-3.0.7 PassengerRuby /usr/bin/ruby1.8 ServerName demo and my vhosts file #No DNS server, default ip address v-host #domain: none #public: /home/casey/public_html/app/ <VirtualHost *:80> ServerAdmin webmaster@localhost # ScriptAlias /redmine /home/casey/public_html/app/redmine/dispatch.fcgi DirectoryIndex index.html DocumentRoot /home/casey/public_html/app/public <Directory "/home/casey/trac/htdocs"> Order allow,deny Allow from all </Directory> <Directory /var/www/redmine> RailsBaseURI /redmine PassengerResolveSymlinksInDocumentRoot on </Directory> # <Directory /> # Options FollowSymLinks # AllowOverride None # </Directory> # <Directory /var/www/> # Options Indexes FollowSymLinks MultiViews # AllowOverride None # Order allow,deny # allow from all # </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /home/casey/public_html/app/log/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel debug CustomLog /home/casey/public_html/app/log/access.log combined # Alias /doc/ "/usr/share/doc/" # <Directory "/usr/share/doc/"> # Options Indexes MultiViews FollowSymLinks # AllowOverride None # Order deny,allow # Deny from all # Allow from 127.0.0.0/255.0.0.0 ::1/128 # </Directory> </VirtualHost>

Read the article

Can't get simple Apache VHost up and running

- by TK Kocheran

Unfortunately, I can't seem to get a simple Apache VHost online. I used to simply have one VHost which bound to all: <VirtualHost *:80>, but this isn't appropriate for security anymore. I need to have one VHost for localhost requests (ie my dev server) and one for incoming requests via my domain name. Here's my new VHost: NameVirtualHost domain1.com <VirtualHost domain1.com:80> DocumentRoot /var/www ServerName domain1.com </VirtualHost> <VirtualHost domain2.com:80> DocumentRoot /var/www ServerName domain2.com </VirtualHost> After I restart my server, I see the following errors in my log: [Wed Feb 16 11:26:36 2011] [error] [client ####.###.###.###] File does not exist: /htdocs [Wed Feb 16 11:26:36 2011] [error] [client ####.###.###.###] File does not exist: /htdocs What am I doing wrong? EDIT As per the answer give below, I have modified my configuration. Here are my configuration files: /etc/apache2/ports.conf: Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> Here are my actual defined sites: /etc/apache2/sites-enabled/000-localhost: NameVirtualHost 127.0.0.1:80 <VirtualHost 127.0.0.1:80> ServerAdmin ######### DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> RewriteEngine On RewriteLog "/var/log/apache2/mod_rewrite.log" RewriteLogLevel 9 <Location /> <Limit GET POST PUT> order allow,deny allow from all deny from 65.34.248.110 deny from 69.122.239.3 deny from 58.218.199.147 deny from 65.34.248.110 </Limit> </Location> </VirtualHost> /etc/apache2/sites-enabled/001-rfkrocktk.dyndns.org: NameVirtualHost rfkrocktk.dyndns.org:80 <VirtualHost rfkrocktk.dyndns.org:80> DocumentRoot /var/www ServerName rfkrocktk.dyndns.org </VirtualHost> And, just for kicks, my main file: /etc/apache2/apache2.conf: # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # Define an access log for VirtualHosts that don't define their own logfile CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ what else do I need to do to fix it? Should I be telling apache to listen on 127.0.0.1:80, or isn't it already listening there?

Read the article

FreeBSD 8.1 unstable network connection

- by frankcheong

I have three FreeBSD 8.1 running on three different hardware and therefore consist of different network adapter as well (bce, bge and igb). I found that the network connection is kind of unstable which I have tried to scp some 10MB file and found that I cannot always get the files completed successfully. I have further checked with my network admin and he claim that the problem is being caused by the network driver which cannot support the load whereby he tried to ping using huge packet size (around 15k) and my server will drop packet consistently at a regular interval. I found that this statement may not be valid since the three server is using three different network drive and it would be quite impossible that the same problem is being caused by three different network adapter and thus different network driver. Since then I have tried to tune up the performance by playing around with the /etc/sysctl.conf figures with no luck. kern.ipc.somaxconn=1024 kern.ipc.shmall=3276800 kern.ipc.shmmax=1638400000 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Required by pf net.inet.ip.forwarding=1 #Network Performance Tuning kern.ipc.maxsockbuf=16777216 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.recvbuf_max=16777216 # Setting specifically for 1 or even 10Gbps network net.local.stream.sendspace=262144 net.local.stream.recvspace=262144 net.inet.tcp.local_slowstart_flightsize=10 net.inet.tcp.nolocaltimewait=1 net.inet.tcp.mssdflt=1460 net.inet.tcp.sendbuf_auto=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.sendspace=262144 net.inet.tcp.recvspace=262144 net.inet.udp.recvspace=262144 kern.ipc.maxsockbuf=16777216 kern.ipc.nmbclusters=32768 net.inet.tcp.delayed_ack=1 net.inet.tcp.delacktime=100 net.inet.tcp.slowstart_flightsize=179 net.inet.tcp.inflight.enable=1 net.inet.tcp.inflight.min=6144 # Reduce the cache size of slow start connection net.inet.tcp.hostcache.expire=1 Our network admin also claim that they see quite a lot of network up and down from their cisco switch log while I cannot find any up down message inside the dmesg. Have further checked the netstat -s but dont have concrete idea. tcp: 133695291 packets sent 39408539 data packets (3358837321 bytes) 61868 data packets (89472844 bytes) retransmitted 24 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 50756141 ack-only packets (2148 delayed) 0 URG only packets 0 window probe packets 4372385 window update packets 39781869 control packets 134898031 packets received 72339403 acks (for 3357601899 bytes) 190712 duplicate acks 0 acks for unsent data 59339201 packets (3647021974 bytes) received in-sequence 114 completely duplicate packets (135202 bytes) 27 old duplicate packets 0 packets with some dup. data (0 bytes duped) 42090 out-of-order packets (60817889 bytes) 0 packets (0 bytes) of data after window 0 window probes 3953896 window update packets 64181 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 45192 discarded due to memory problems 19945391 connection requests 1323420 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 21133581 connections established (including accepts) 21268724 connections closed (including 32737 drops) 207874 connections updated cached RTT on close 207874 connections updated cached RTT variance on close 132439 connections updated cached ssthresh on close 42392 embryonic connections dropped 72339338 segments updated rtt (of 69477829 attempts) 390871 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 13990 keepalive timeouts 2 keepalive probes sent 13988 connections dropped by keepalive 173044 correct ACK header predictions 36947371 correct data packet header predictions 1323420 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 1323420 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 1323420 cookies sent 0 cookies received 1864 SACK recovery episodes 18005 segment rexmits in SACK recovery episodes 26066896 byte rexmits in SACK recovery episodes 147327 SACK options (SACK blocks) received 87473 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 5141258 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 1 with no checksum 0 dropped due to no socket 129616 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 5011642 delivered 5016050 datagrams output 0 times multicast source filter matched sctp: 0 input packets 0 datagrams 0 packets that had data 0 input SACK chunks 0 input DATA chunks 0 duplicate DATA chunks 0 input HB chunks 0 HB-ACK chunks 0 input ECNE chunks 0 input AUTH chunks 0 chunks missing AUTH 0 invalid HMAC ids received 0 invalid secret ids received 0 auth failed 0 fast path receives all one chunk 0 fast path multi-part data 0 output packets 0 output SACKs 0 output DATA chunks 0 retransmitted DATA chunks 0 fast retransmitted DATA chunks 0 FR's that happened more than once to same chunk 0 intput HB chunks 0 output ECNE chunks 0 output AUTH chunks 0 ip_output error counter Packet drop statistics: 0 from middle box 0 from end host 0 with data 0 non-data, non-endhost 0 non-endhost, bandwidth rep only 0 not enough for chunk header 0 not enough data to confirm 0 where process_chunk_drop said break 0 failed to find TSN 0 attempt reverse TSN lookup 0 e-host confirms zero-rwnd 0 midbox confirms no space 0 data did not match TSN 0 TSN's marked for Fast Retran Timeouts: 0 iterator timers fired 0 T3 data time outs 0 window probe (T3) timers fired 0 INIT timers fired 0 sack timers fired 0 shutdown timers fired 0 heartbeat timers fired 0 a cookie timeout fired 0 an endpoint changed its cookiesecret 0 PMTU timers fired 0 shutdown ack timers fired 0 shutdown guard timers fired 0 stream reset timers fired 0 early FR timers fired 0 an asconf timer fired 0 auto close timer fired 0 asoc free timers expired 0 inp free timers expired 0 packet shorter than header 0 checksum error 0 no endpoint for port 0 bad v-tag 0 bad SID 0 no memory 0 number of multiple FR in a RTT window 0 RFC813 allowed sending 0 RFC813 does not allow sending 0 times max burst prohibited sending 0 look ahead tells us no memory in interface 0 numbers of window probes sent 0 times an output error to clamp down on next user send 0 times sctp_senderrors were caused from a user 0 number of in data drops due to chunk limit reached 0 number of in data drops due to rwnd limit reached 0 times a ECN reduced the cwnd 0 used express lookup via vtag 0 collision in express lookup 0 times the sender ran dry of user data on primary 0 same for above 0 sacks the slow way 0 window update only sacks sent 0 sends with sinfo_flags !=0 0 unordered sends 0 sends with EOF flag set 0 sends with ABORT flag set 0 times protocol drain called 0 times we did a protocol drain 0 times recv was called with peek 0 cached chunks used 0 cached stream oq's used 0 unread messages abandonded by close 0 send burst avoidance, already max burst inflight to net 0 send cwnd full avoidance, already max burst inflight to net 0 number of map array over-runs via fwd-tsn's ip: 137814085 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 1200 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 300 packets reassembled ok 137813009 packets for this host 530 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 61 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 137234598 packets sent from this host 0 packets sent with fabricated ip header 685307 output packets dropped due to no bufs, etc. 52 output packets discarded due to no route 300 output datagrams fragmented 1200 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message Output histogram: echo reply: 305 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored Input histogram: destination unreachable: 530 echo: 305 305 message responses generated 0 invalid return addresses 0 no return routes ICMP address mask responses are disabled igmp: 0 messages received 0 messages received with too few bytes 0 messages received with wrong TTL 0 messages received with bad checksum 0 V1/V2 membership queries received 0 V3 membership queries received 0 membership queries received with invalid field(s) 0 general queries received 0 group queries received 0 group-source queries received 0 group-source queries dropped 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 V3 reports received without Router Alert 0 membership reports sent arp: 376748 ARP requests sent 3207 ARP replies sent 245245 ARP requests received 80845 ARP replies received 326090 ARP packets received 267712 total packets dropped due to no ARP entry 108876 ARP entrys timed out 0 Duplicate IPs seen ip6: 2226633 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 2226633 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 2226633 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 8 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Input histogram: UDP: 2226633 Mbuf statistics: 962679 one mbuf 1263954 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not continuous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 0 failures of source address selection Source addresses selection rule applied: icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output netstat -m 516/5124/5640 mbufs in use (current/cache/total) 512/1634/2146/32768 mbuf clusters in use (current/cache/total/max) 512/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1303/1303/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1153K/9761K/10914K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/8/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 0 requests for I/O initiated by sendfile 0 calls to protocol drain routines Anyone got an idea what might be the possible cause?

Read the article

SOA PARTNER COMMUNITY NEWSLETTER JULY 2012

- by mseika

SOA PARTNER COMMUNITY NEWSLETTER JULY 2012 Dear SOA partner community member To provide our community members the best of our knowledge, we want your feedback on our SOA Partner community. Thus we are organizing SOA Partner Community Survey 2012. We request you to participate in the survey and give your valuable feedback on various areas of marketing, sales and education. To continue our successful BPM Suite, Oracle is launching together with you Process Accelerators initiative. It’s your opportunity to co-develop and market predefined processes. Oracle Fusion Applications Design Patterns are a great tool to develop your SOA or BPM solution or process accelerators. To promote your SOA & BPM Specialization we continue to offer several benefits. This month we would like to highlight our Specialization Plaques - make sure you request one for your office! Our Fusion Middleware Summer Camps are booked out, if could not get a seat you can attend the SOA & BPM track @ Virtual Developer Day: Oracle Fusion Development Oracle demo systems offer´s two new demos: Business Driven Development based on BPM Suite & SOA Lifecycle Management. Jürgen KressOracle SOA & BPM Partner Adoption EMEA NEW CONTENT Community SurveyProcess Accelerators KitPlaques SOA & BPM SpecializedSOA & BPM at Virtual Developer Day News from our Partners & CommunityOverview of SOA Diagnostics in 11.1.1.6 Business driven development(BDD) demo now available! SOA Lifecycle Management Oracle Fusion applications design patterns Updated material by Oracle Connect and Network SOA Blogs SOA on Facebook SOA on LinkedIn SOA on Twitter Mix SOA Forum COMMUNITY SURVEY Like every year we would like to get your feedback in our SOA Partner Community Survey 2012. Make sure that You attend to further develop our community and support our planning! It is key for us to get your feedback to prepare for the next fiscal year. Back to top PROCESS ACCELERATORS KIT Oracle is very interested to co-develop and market with you, our partners, pre-defined processes for BPM Suite.I am very happy to announce a new program called “Oracle BPM Partner Solution Catalog”. This program will provide a one-stop shop for our customers looking for Oracle BPM partner solutions available in the market today.The Oracle BPM Solution Catalog will be hosted on our very popular Oracle Technology Network (OTN). To give you an idea of the scale of customer visibility, OTN today receives over 1Million hits per day from our business and developer community. We would like to invite you to list your Oracle BPM 11g solutions available today.In order to participate in this program, you need to do the following: Fill in the attached slide templates - #3 and #4 for each Oracle BPM 11g solution you would like to list on OTN.Please add links to whitepapers , videos, references to the specific solution in the template slide. We recommend that you create a landing page on your website for these linked artifacts and just point to the same from within the PowerPoint template. This will give you the flexibility to update the information as frequently as needed. If you have the particular solution in production or a reference available, please list them as well. Send the PowerPoint template slides (1 set of slides for each Oracle BPM solution) to [email protected]. In addition to having the opportunity to list your solutions on OTN for Oracle customers, you will have the chance to advertise your new wins/implementations/solutions in an Oracle Sponsored PM Webinar held every quarter. This program is targeted to go live by the end of summer 2012. At this point, we are targeting a soft launch in July end 2012 so send on your BPM solutions information as soon as possible. We would love to have your solution(s) listed in the “Oracle BPM Partner Solution Catalog” at the time of the launch. This will be a live repository so you can keep adding more solutions as they become available. If you have any questions, please feel free to contact us [email protected], Product Strategy Director, Oracle BPM , Phone +1 650.506.5486.Thank you and look forward to hearing from you. Oracle BPM team Process Accelerators Overview.pdf ProcessAcceleratorsDataSheet.pdf Demos draUPK.zip & trmUPK.zip BPM Solution repository slides.ppt Additional BPM material BPM Process Development Lifecycle Document that describes recommended approach to collaborative process modeling across business and IT tools ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization) by Andrejus Baranovskis BPMN process editor problems in 11.1.1.6 by Mark Nelson BPM – Disable DBMS job to refresh B2B Materialized View by Mark Nelson For the complete kit please visit the BPM folder at our SOA Community Workspace (SOA Community membership required). For the complete presentation please visit our SOA Community Workspace (SOA Community membership required). Information is Oracle and Partner confidential! Back to top PLAQUES SOA & BPM SPECIALIZED We continue to offer you a nice SOA & BPM Specialization plaque with your logo to proof your success. If you are a SOA or BPM Specialized partner and would like to request the plaque please send Brigitte an e-mail with the following information: Partner Name Partner logo (preferred eps file) Partner Status gold or platinum Your shipping address Your Specialization: SOA or BPM We recommend to mount the plaque at your office reception in addition you can use the SOA Specialization logos at your website download Logo: Gold & Platinum or the BPM logos Gold & Platinum Back to top SOA & BPM AT VIRTUAL DEVELOPER DAY Register now for this FREE hands-on online workshop Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staffOracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF’s integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications.Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect - this event has something for everyone. Don’t miss this opportunity.Tuesday, July 10, 2012. 9:00 a.m. PT -1:00 p.m. PT 11:00 a.m. CT - 3:00 p.m. CT 12:00 p.m. ET - 4:00 p.m. ET 1:00 p.m. BRT - 5:00 p.m. BRT Register online now! for this FREE event. Agenda: 09:00 am Opening 09:30 am Keynote: Oracle Fusion Development Track1Introduction to Fusion Development Track2What's New in Fusion Development Track3Fusion Development in the Enterprise 10:00 am Is Oracle ADF Development Faster and Simpler than Oracle Forms, APEX or .Net? Mobile Application Development with ADF Mobile Oracle WebCenter Portal and ADF Development 11:00 am Rich Web UI made simple - an ADF Faces Overview Oracle Enterprise Pack for Eclipse - ADF Development Building Process Centric Applications with ADF and BPM 12:00 noon Next Generation Controller for JSF Application Lifecycle Management for ADF Oracle Business Intelligence and ADF Integration *Hands On Lab – WebCenter and ADF Lab w/ JDeveloper - Lab materials will be provided ahead of the event to give you ample time to work through the lab and increase the productivity of the live chat sessions the day of the event. Sessions abstractsRegister online now! for this FREE event Read more on Community Events and post your comment here. Back to top NEWS FROM OUR PARTNERS AND COMMUNITY Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity JDeveloper & ADF?Troubleshooting BPMN process editor problems in 11.1.1.6http://dlvr.it/1p0FfS SOA Community?SOA & BPM @ Virtual Developer Day: Oracle Fusion Development - July 10th 2012https://soacommunity.wordpress.com/2012/07/02/soa-bpm-virtual-developer-day- oracle-fusion-developmentjuly-10th-2012/#soacommunity #soa #bom #education orclateamsoa ?A-Team Blog #ateam: BAM design pointers - In working recently with a large Oracle customer on SOA and BAM, I discove.http://ow.ly/1kYqES SOA CommunitySOA Community Newsletter June 2012http://wp.me/p10C8u-qw SOA CommunityBPMN process editor problems in 11.1.1.6 by Mark Nelsonhttp://redstack.wordpress.com/2012/06/27/ bpmn-process-editor-problems-in-11-1-1-6 #soacommunity #bpm OTNArchBeat ?SOA Learning Library: free short, topic-focused training on Oracle SOA & BPM products | @SOACommunity http://pub.vitrue.com/NE1G Andrejus Baranovskis ?ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization)http://fb.me/1coX4r1X1 SOA CommunitySOA Learning Library provides a comprehensive curriculum for the SOA and BPM product suites https://soacommunity.wordpress.com/2012/06/27/soa-learning-library #soacommunity #soa #bpm OTNArchBeat ?A Universal JMX Client for Weblogic - Part 1: Monitoring BPEL Thread Pools in SOA 11g | Stefan Koserhttp://pub.vitrue.com/mQVZ OTNArchBeat ?BPM - Disable DBMS job to refresh B2B Materialized View | Mark Nelson http://pub.vitrue.com/3PR0Oracle SOA ?Learn how Choice Hotels Implements Innovative Google Maps Solution with #OracleSOA http://bit.ly/MTwIJ3 SOA Communitytop Tweets SOA Partner Community - June 2012 Send your tweets @soacommunity #soacommunity https://soacommunity.wordpress.com/2012/06/25/top-tweets-soa-partner-community-june-2012 Torsten Winterberg#OPITZ is pushing Oracle commitment to the next level: New Specializations done: ADF, BPM, WLS, Exadatahttp://bit.ly/KX1WVS ServiceTechSymposium ?Only 8 more days left until Super Early Bird Registration Discount expires! http://www.servicetechsymposium.com OracleBlogsSOA Management in 3 minutes - Video explainerhttp://ow.ly/1kN5pn SOA Community ?SOA, Cloud & Service Technology Symposium 2012 London - Enter Promo Code: Djmxz370https://soacommunity.wordpress.com/2012/06/22/soa-cloud-service-technology-symposium-2012-london #soasymposium #soacommunity #soa Heidi BuelowGreat course! w David Read RT @soacommunity: product management ADF for BPM training 5 seats left https://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity SOA Community ?product management ADF for BPM training 5 seats lefthttps://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity OTNArchBeat ?Oacle Fusion Applications Design Patterns Now Available For Developers | Ultan O'Broinhttp://pub.vitrue.com/UEiF OTNArchBeat ?SOA, Cloud & Service Technology Symposium 2012London - Special Oracle Discounthttp://pub.vitrue.com/8E0J SOA CommunityBecome a facebook fan of soacommunity http://www.facebook.com/soacommunity #soacommunity SOA Community ?SOA Suite HealthCare Integration Architecture https://blogs.oracle.com/SOAForHealthcare/entry/soa_suite_healthcare_integration_architecture #soacommunity #soa Andrejus Baranovskis ?Running Pre-built Virtual Machine for SOA Suite and BPM Suite 11g PS5 on Mac OS X Snow Leopard (10.6http://fb.me/vB8nO0Vg OracleBlogsPrinciples of Service-Oriented Architecture by Douwe P. van den Bos http://ow.ly/1kIcOP OTNArchBeatOracle Public Cloud Architecture | @TylerJewell http://ow.ly/bHAcL The SOA Network ?Business Process Management, Service-Oriented Architecture, and Web 2.0: Business Transformation or.http://bit.ly/LBgREL #ITNews #SOA OracleBlogs ?Oracle SOA Foundation Practitioner Certificationhttp://ow.ly/1kGYYg Frank Nimphius ?Learn Advanced ADF. ORACLE Fusion Middleware Summer Camps in Lisbon - July 9th - 13thhttp://bit.ly/KGCl3i SOA CommunityTransform Your Application Integration with Best Practices from Oracle Customershttps://blogs.oracle.com/SOA/entry/transform_your_application_integration_with #soacommunity #soa #bpm Simone GeibWhat you always wanted to know about #oraclesoa diagnostics: Shawn Bailey, Overview of SOA Diagnostics in 11.1.1.6,http://ow.ly/bxK0M Oracle SOA ?Save the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to #oraclesoa http://bit.ly/LsNDGl OTNArchBeat ?New VirtualBox images for Oracle SOA Suite & Oracle BPM Suite 11.1.1.6.0http://ow.ly/bwDAl OracleBlogs ?Process development lifecycle in Oracle BPM 11g http://ow.ly/1ktesY Daniel AmadeiNew post: Oracle BPEL 11g Message Delivery & Recovery.http://amadei.com.br/blog/index.php /oracle-bpel-11g-message-delivery SOA Community ?Sending out the June edition of the #soacommunity newsletter - read it or become a member http://www.oracle.com/goto/emea/soa!#soa #bpm Arun Pareek ?For the past six months Ahmed Aboulnaga and me have been working on Oracle SOA Suite 11g Administrator's Handbook.http://lnkd.in/CAvpUQ SOA CommunitySun shine all day no clouds - solar eclipse is over... #sunshine #cloud http://www.infoq.com/presentations/Swarm-Computing Michel SchildmeijerWatch my blog Oracle Service Bus 11g: listing projects and services with WLST - part 1 http://lnkd.in/B7f3GQ @TITAN_GS @wlscommunity OTNArchBeatBook Review: Oracle Application Integration Architecture (AIA) Foundation Pack 11gR1: Essentials | Rajesh Rahejahttp://ow.ly/bn2cc OTNArchBeat ?Driving from Business Architecture to Business Process Services | @vghariharan http://ow.ly/bn5UB OTNArchBeat ?SOA Analysis within the Department of Defense Architecture Framework (DoDAF) 2.0 - Part II | Dawit Lessanu http://ow.ly/bn6sX Simone Geib ?Contact me directly for ideas how to improvehttp://bit.ly/advancedsoasuite and additional posts, presentations, white papers, ... #soasuite Simone Geib ?#soasuite advanced OTN page has become too cluttered. Broke it into separate pages to start with. http://bit.ly/advancedsoasuite OracleBlogs ?June Webcast: SOA Gateway Implementation and Troubleshooting (2 sessions) http://ow.ly/1kbRFA ServiceTechSymposium ?New session just posted to calendar: "NoSQL for Data Services, Data Virtualization & Big Data" by Guido Schmutz, Trivadis AG ://ow.ly/bjjOeDebra Lilley ?looks good - real proof people are using the apps ! RT @fteter: Very cool Fusion Applications Help site: http://bit.ly/L3nvOR #FusionApps demed ?rapid proliferation of cloud computing will drive convergence of SOA and cloud paradigms" http://ovum.com/2012/05/18/soa-paves-the-way-for-cloud/ SOA CommunityMiddleware Oracle Excellence Awards 2012-HAPPY NEW YEAR! https://soacommunity.wordpress.com/2012/05/31/middleware-oracle-excellence-awards-2012happy-new-year/ #soacommunity #opn #opnaward #specialization #oracle SOA CommunityHappy New Year #soacommunity thanks for the business! Time for a drink http://pic.twitter.com/zkK08KWB OTNArchBeat ?Who should ‘own’ the Enterprise Architecture? | Michael Glas http://bit.ly/K0ge0Q SOA Communitytop Tweets SOA Partner Community – May 2012 http://wp.me/p10C8u-pP ServiceTechSymposiumNew session just posted to Symposium calendar: "Elastic SOA in the Cloud" by Steve Millidge, C2B2 Consulting http://www.servicetechsymposium.com/agenda2012.php #elastic_soa_in_the_cloud orclateamsoa ?A-Team Blog #ateam: How to Set JVM Parameters in Oracle SOA 11Ghttp://ow.ly/1k2cnl ServiceTechSymposium ?New session just posted to Symposium calendar: "SOA Governance at EDP: A Global Energy Company" by Manuel Rosa, Linkhttp://www.servicetechsymposium.com/agenda2012.php#soa_governance_at_edp SOA Community ?VirtualBox image SOA Suite & BPM Suite 11.1.1.6.0–Your feedback?http://wp.me/p10C8u-qh Oracle MiddlewareSave the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to#oraclesoa http://bit.ly/LU1y5N OTNArchBeat ?Goodbye, Silos. Hello SOA. | @stephanieoverbyhttp://pub.vitrue.com/NJJO SOA CommunityBPM Standard Edition - to start your BPM project http://wp.me/p10C8u-qj Please feel free to send us your news! And add your blog to our SOA blog wiki. Back to top OVERVIEW OF SOA DIAGNOSTICS IN 11.1.1.6 What tools are available for diagnosing SOA Suite issues? There are a variety of tools available to help you and Support diagnose SOA Suite issues in 11g but it can be confusing as to which tool is appropriate for a particular situation and what their relationships are. This blog post will introduce the various tools and attempt to clarify what each is for and how they are related. Let's first list the tools we'll be addressing: RDA: Remote Diagnostic Agent DFW: Diagnostic Framework Selective Tracing DMS: Dynamic Monitoring Service ODL: Oracle Diagnostic Logging ADR: Automatic Diagnostics Repository ADRCI: Automatic Diagnostics Repository Command Interpreter WLDF: WebLogic Diagnostic Framework This overview is not mean to be a comprehensive guide on using all of these tools, however, extensive reference materials are included that will provide many more details on their execution. Another point to note is that all of these tools are applicable for Fusion Middleware as a whole but specific products may or may not have implemented features to leverage them. A couple of the tools have a WebLogic Scripting Tool or 'WLST' interface. WLST is a command interface for executing pre-built functions and custom scripts against a domain. A detailed WLST tutorial is beyond the scope of this post but you can find general information here. There are more specific resources in the below sections.In this post when we refer to 'Enterprise Manager' or 'EM' we are referring to Enterprise Manager Fusion Middleware Control. read the full blog post here. Read more on Oracle and post your comment here. Back to top BUSINESS DRIVEN DEVELOPMENT (BDD) DEMO NOW AVAILABLE! For access to the Oracle demo systems please visit OPN and talk to your Partner Expert DSS is pleased to announce the availability of the demo “Business Driven Development“. This innovative demonstration uses a case-study approach to show business users how they can easily streamline their Business Processes - delivering greater efficiency, agility, visibility and collaboration with Oracle BPM and WebCenter. The BDD demonstration uses a case study-based approach to highlight a business problem at a fictional company, Avitek Corporation, and uses Oracle BPM and Oracle WebCenter to solve the business problem. This holistic approach has specifically been used to appeal to a non-technical business analyst user. This demo is NOT focused on product features, but aims to guide users through a complete BPM lifecycle. The scenario is based on improving a simple order process (scenario details are in the demo script). Avitek Corporation is sufferinng from a manual email-driven ordering process. Sales reps don’t know where the customer orders are stuck (no visibility) and finance users are unable to manually approve every order (no automation). There are several areas where this process can be improved with Business Process Management technology. This demo shows how improving following areas will ignificantly help resolve the business problems Avitek Corporation is facing. Areas for improvement include: Utilizing BPM for process management, rather than an unregulated, email-based process. Utilizing automated services, rather than requiring a human to key into a system. For example, Finance checking the customer’s credit rating is something that could be automated. Centralizing business rules that can be integrated into a business process, rather than requiring a human to process them. For example, Finance must determine when orders can be automatically approved. Provide insight and visibility into the process. For example, Sales Rep needs to know the status of their customer’s orders. The BDD Demo uses the following products. Oracle BPM Suite 11g PS4FP Oracle WebCenter 11g PS4FP (for Process Spaces) Oracle Business Activity Monitoring 11g Oracle Database 11g Back to top SOA LIFECYCLE MANAGEMENT For access to the Oracle demo systems please visit OPN and talk to your Partner Expert We are pleased to announce the availability of the SOA Management demo that showcases some of the key provisioning and lifecycle management capabilities of SOA Management Pack Enterprise Edition (EE). This demo specifically focuses on some of the lifecycle management solutions for Oracle SOA Suite and Oracle Service Bus (OSB). Demo Highlights The demo showcases the following capabilities. Provisioning of SOA Composites Provisioning of OSB Projects Provision SOA and OSB artifacts in a future maintenance window Back to top ORACLE FUSION APPLICATIONS DESIGN PATTERNS The Oracle Fusion Applications user experience design patterns are published! These new, reusable usability solutions and best-practices, which will join the Oracle dashboard patterns and guidelines that are already available online, are used by Oracle to artfully bring to life a new standard in the user experience, or UX, of enterprise applications. Now, the Oracle applications development community can benefit from the science behind the Oracle Fusion Applications user experience, too. These Oracle Fusion Applications UX Design Patterns, or blueprints, enable Oracle applications developers and system implementers everywhere to leverage professional usability insight when: tailoring an Oracle Fusion application, creating coexistence solutions that existing users will be delighted with, thus enabling graceful user transitions to Oracle Fusion Applications down the road, or designing exciting, new, highly usable applications in the cloud or on-premise. Based on the Oracle Application Development Framework (ADF) components, the Oracle Fusion Applications patterns and guidelines are proven with real users and in the Applications UX usability labs, so you can get right to work coding productivity-enhancing designs that provide an advantage for your entire business. What’s the best way to get started? We’ve made that easy, too. The Design Filter Tool (DeFT) selects the best pattern for your user type and task. Simply adapt your selection for your own task flow and content, and you’re on your way to a really great applications user experience. More Oracle applications design patterns and training are coming your way in the future. To provide feedback on the sets that are currently available, let me know in the comments! Read more on Fusionapps and post your comment here. Back to top UPDATED ORACLE MATERIAL Integrated SOA Gateway Documentation - Implementation Guide | Developer’s Guide Webcast Series: Oracle’s SOA and Oracle Business Process Management Solutions (Choice Hotels, Eaton, Farmers Insurance) BAM design pointers By Kavitha Srinivasan Seeking Oracle Fusion Middleware Go Live StoriesOracle Fusion Middleware product management is looking for recent go live stories to share with the Oracle sales team, sales consulting, product management and other internal groups. Customer contact details may remain anonymous. Your successful implementation will be featured in a quarterly report. The chance to present on an internal webcast is also available. Contact Maria Forney ([email protected]) if you have a noteworthy implementation success story. This is a good opportunity for partners interested in showcasing Oracle Fusion Middleware implementations, and gaining more exposure within Oracle. Performance tuning resources. All in one: docs, blogs, WPs, ppts: http://bit.ly/soa_resources Back to top HAVE YOU MISSED OUR LAST SOA PARTNER COMMUNITY WEBCASTS? UPK Webcast Business Driven Application Management & BPM11g & Application Grid & GoldenGate & Fusion Middleware Pricing & OC4J to WebLogic & Next Generation SOA & Fusion Middleware in Utility & Fusion Middleware in Communications & Fusion Middleware in Public Services & Fusion Middleware in Financial Services Please check your local OPN trainings calendar for additional training dates and locations. Back to top SOA PARTNER COMMUNITY CALENDAR On-Demand Trainings Event Name Language Type SOA Virtual Developers Day English Tech In-Class Trainings Date Event name Location / Country Contact person Type 09-13.07.2012 BPM Suite 11g advanced training by David Read Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 ADF 11g advanced training by Grant Ronald and Frank Nimphius Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 WebCenter Portal advanced training by Stefan Krantz and Angelo Santagata Lisbon, Portugal Jürgen Kress Tech 10.07.2012 Fusion Middleware Virtual Developer Day Online OTN Tech 10- 12.07.2012 WebLogic 12c training by Cosmin Tudor Lisbon, Portugal Jürgen Kress Tech 16-18.07.2012 SOA Suite 11g advanced training by Niall Commiskey Munich, Germany Jürgen Kress Tech 16-18.07.2012 ADF for BPM Suite 11g advanced training by David Read Munich, Germany Jürgen Kress Tech 16-18.07.2012 WebCenter Sites 11g advanced training by Product Management Munich, Germany Jürgen Kress Tech 17-20.07.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 23-26.07.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 29-31.08.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 02-05.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 28-30.11.2012 Oracle AIA 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 11-14.12.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 20-22.2.2013 Oracle AIA 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 14-17.1.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.3.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech Please check your local OPN Training Calendar for additional training and locations here. Back to top SOASCHOOL.COM - SOA CERTIFIED PROFESSIONAL(SOACP) PROGRAM The SOASchool.com - SOA Certified Professional (SOACP) program is dedicated to excellence in the field of SOA and service-oriented computing. Through a series of seasoned course modules and exams, IT professionals have the opportunity to obtain a number of different certifications to recognize their accomplishment of gaining "project ready" SOA proficiency. This comprehensive and strictly vendor-neutral program was developed in cooperation with best-selling SOA author Thomas Erl and several major SOA organizations and academic institutions. Through the involvement of the SOA Education Committee, course contents and certification requirements are constantly reviewed and revised to stay current with developments in the service-oriented computing industry. The program is currently comprised of 12 course modules and 5 certifications and is expanding to 18 course modules and 8 certifications throughout 2009. For more information, visit www.soaschool.com and www.soacp.com. Blog Twitter LinkedIn Mix Forum Wiki Back to top YOUR CONTENT ON THE NEWSLETTER AND ON THE SOA COMMUNITY PORTAL Publishing Your StoriesWe would like to invite our partners to publish information in the newsletter or on our SOA Community portal. Especially we are looking for your real life experience with our SOA technology. Please send your documents to Jürgen Kress. We look forward to getting your suggestions! Back to top SOA DISCUSSION FORUM BECOMES INTERACTIVE AT THE SOA COMMUNITY! Do you want to chat to experts, including partners and Oracle SOA Product Development? Do you want to get the latest information about our SOA solutions and events?Attend our private online SOA Discussion Forum at OTN. Please send your OTN forums user name to Brigitte Felisaz. You must be a registered user to access the SOA Discussion Forum. Back to top INVITE YOUR COLLEAGUES TO JOIN THE SOA COMMUNITY Please feel free to invite your colleagues to join the SOA Community and to participate in the SOA Assessment tests. For registration please login the Oracle PartnerNetwork and go to: www.oracle.com/goto/emea/soa For any questions on the above or concerning SOA and Oracle in general please contact the Oracle EMEA Alliances & Channels SOA Team. Best regardsOracle EMEA SOA TeamJürgen Kress Jürgen KressSOA Partner Adoption EMEATel. +49 89 1430 1479E-Mail: [email protected]

Read the article

Upload File to Windows Azure Blob in Chunks through ASP.NET MVC, JavaScript and HTML5

- by Shaun

Originally posted on: http://geekswithblogs.net/shaunxu/archive/2013/07/01/upload-file-to-windows-azure-blob-in-chunks-through-asp.net.aspxMany people are using Windows Azure Blob Storage to store their data in the cloud. Blob storage provides 99.9% availability with easy-to-use API through .NET SDK and HTTP REST. For example, we can store JavaScript files, images, documents in blob storage when we are building an ASP.NET web application on a Web Role in Windows Azure. Or we can store our VHD files in blob and mount it as a hard drive in our cloud service. If you are familiar with Windows Azure, you should know that there are two kinds of blob: page blob and block blob. The page blob is optimized for random read and write, which is very useful when you need to store VHD files. The block blob is optimized for sequential/chunk read and write, which has more common usage. Since we can upload block blob in blocks through BlockBlob.PutBlock, and them commit them as a whole blob with invoking the BlockBlob.PutBlockList, it is very powerful to upload large files, as we can upload blocks in parallel, and provide pause-resume feature. There are many documents, articles and blog posts described on how to upload a block blob. Most of them are focus on the server side, which means when you had received a big file, stream or binaries, how to upload them into blob storage in blocks through .NET SDK. But the problem is, how can we upload these large files from client side, for example, a browser. This questioned to me when I was working with a Chinese customer to help them build a network disk production on top of azure. The end users upload their files from the web portal, and then the files will be stored in blob storage from the Web Role. My goal is to find the best way to transform the file from client (end user’s machine) to the server (Web Role) through browser. In this post I will demonstrate and describe what I had done, to upload large file in chunks with high speed, and save them as blocks into Windows Azure Blob Storage. Traditional Upload, Works with Limitation The simplest way to implement this requirement is to create a web page with a form that contains a file input element and a submit button. 1: @using (Html.BeginForm("About", "Index", FormMethod.Post, new { enctype = "multipart/form-data" })) 2: { 3: <input type="file" name="file" /> 4: <input type="submit" value="upload" /> 5: } And then in the backend controller, we retrieve the whole content of this file and upload it in to the blob storage through .NET SDK. We can split the file in blocks and upload them in parallel and commit. The code had been well blogged in the community. 1: [HttpPost] 2: public ActionResult About(HttpPostedFileBase file) 3: { 4: var container = _client.GetContainerReference("test"); 5: container.CreateIfNotExists(); 6: var blob = container.GetBlockBlobReference(file.FileName); 7: var blockDataList = new Dictionary<string, byte[]>(); 8: using (var stream = file.InputStream) 9: { 10: var blockSizeInKB = 1024; 11: var offset = 0; 12: var index = 0; 13: while (offset < stream.Length) 14: { 15: var readLength = Math.Min(1024 * blockSizeInKB, (int)stream.Length - offset); 16: var blockData = new byte[readLength]; 17: offset += stream.Read(blockData, 0, readLength); 18: blockDataList.Add(Convert.ToBase64String(BitConverter.GetBytes(index)), blockData); 19: 20: index++; 21: } 22: } 23: 24: Parallel.ForEach(blockDataList, (bi) => 25: { 26: blob.PutBlock(bi.Key, new MemoryStream(bi.Value), null); 27: }); 28: blob.PutBlockList(blockDataList.Select(b => b.Key).ToArray()); 29: 30: return RedirectToAction("About"); 31: } This works perfect if we selected an image, a music or a small video to upload. But if I selected a large file, let’s say a 6GB HD-movie, after upload for about few minutes the page will be shown as below and the upload will be terminated. In ASP.NET there is a limitation of request length and the maximized request length is defined in the web.config file. It’s a number which less than about 4GB. So if we want to upload a really big file, we cannot simply implement in this way. Also, in Windows Azure, a cloud service network load balancer will terminate the connection if exceed the timeout period. From my test the timeout looks like 2 - 3 minutes. Hence, when we need to upload a large file we cannot just use the basic HTML elements. Besides the limitation mentioned above, the simple HTML file upload cannot provide rich upload experience such as chunk upload, pause and pause-resume. So we need to find a better way to upload large file from the client to the server. Upload in Chunks through HTML5 and JavaScript In order to break those limitation mentioned above we will try to upload the large file in chunks. This takes some benefit to us such as - No request size limitation: Since we upload in chunks, we can define the request size for each chunks regardless how big the entire file is. - No timeout problem: The size of chunks are controlled by us, which means we should be able to make sure request for each chunk upload will not exceed the timeout period of both ASP.NET and Windows Azure load balancer. It was a big challenge to upload big file in chunks until we have HTML5. There are some new features and improvements introduced in HTML5 and we will use them to implement our solution. In HTML5, the File interface had been improved with a new method called “slice”. It can be used to read part of the file by specifying the start byte index and the end byte index. For example if the entire file was 1024 bytes, file.slice(512, 768) will read the part of this file from the 512nd byte to 768th byte, and return a new object of interface called "Blob”, which you can treat as an array of bytes. In fact, a Blob object represents a file-like object of immutable, raw data. The File interface is based on Blob, inheriting blob functionality and expanding it to support files on the user's system. For more information about the Blob please refer here. File and Blob is very useful to implement the chunk upload. We will use File interface to represent the file the user selected from the browser and then use File.slice to read the file in chunks in the size we wanted. For example, if we wanted to upload a 10MB file with 512KB chunks, then we can read it in 512KB blobs by using File.slice in a loop. Assuming we have a web page as below. User can select a file, an input box to specify the block size in KB and a button to start upload. 1: <div> 2: <input type="file" id="upload_files" name="files[]" /><br /> 3: Block Size: <input type="number" id="block_size" value="512" name="block_size" />KB<br /> 4: <input type="button" id="upload_button_blob" name="upload" value="upload (blob)" /> 5: </div> Then we can have the JavaScript function to upload the file in chunks when user clicked the button. 1: <script type="text/javascript"> 1: 2: $(function () { 3: $("#upload_button_blob").click(function () { 4: }); 5: });</script> Firstly we need to ensure the client browser supports the interfaces we are going to use. Just try to invoke the File, Blob and FormData from the “window” object. If any of them is “undefined” the condition result will be “false” which means your browser doesn’t support these premium feature and it’s time for you to get your browser updated. FormData is another new feature we are going to use in the future. It could generate a temporary form for us. We will use this interface to create a form with chunk and associated metadata when invoked the service through ajax. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: if (window.File && window.Blob && window.FormData) { 4: alert("Your brwoser is awesome, let's rock!"); 5: } 6: else { 7: alert("Oh man plz update to a modern browser before try is cool stuff out."); 8: return; 9: } 10: }); Each browser supports these interfaces by their own implementation and currently the Blob, File and File.slice are supported by Chrome 21, FireFox 13, IE 10, Opera 12 and Safari 5.1 or higher. After that we worked on the files the user selected one by one since in HTML5, user can select multiple files in one file input box. 1: var files = $("#upload_files")[0].files; 2: for (var i = 0; i < files.length; i++) { 3: var file = files[i]; 4: var fileSize = file.size; 5: var fileName = file.name; 6: } Next, we calculated the start index and end index for each chunks based on the size the user specified from the browser. We put them into an array with the file name and the index, which will be used when we upload chunks into Windows Azure Blob Storage as blocks since we need to specify the target blob name and the block index. At the same time we will store the list of all indexes into another variant which will be used to commit blocks into blob in Azure Storage once all chunks had been uploaded successfully. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: ... ... 4: // start to upload each files in chunks 5: var files = $("#upload_files")[0].files; 6: for (var i = 0; i < files.length; i++) { 7: var file = files[i]; 8: var fileSize = file.size; 9: var fileName = file.name; 10: 11: // calculate the start and end byte index for each blocks(chunks) 12: // with the index, file name and index list for future using 13: var blockSizeInKB = $("#block_size").val(); 14: var blockSize = blockSizeInKB * 1024; 15: var blocks = []; 16: var offset = 0; 17: var index = 0; 18: var list = ""; 19: while (offset < fileSize) { 20: var start = offset; 21: var end = Math.min(offset + blockSize, fileSize); 22: 23: blocks.push({ 24: name: fileName, 25: index: index, 26: start: start, 27: end: end 28: }); 29: list += index + ","; 30: 31: offset = end; 32: index++; 33: } 34: } 35: }); Now we have all chunks’ information ready. The next step should be upload them one by one to the server side, and at the server side when received a chunk it will upload as a block into Blob Storage, and finally commit them with the index list through BlockBlobClient.PutBlockList. But since all these invokes are ajax calling, which means not synchronized call. So we need to introduce a new JavaScript library to help us coordinate the asynchronize operation, which named “async.js”. You can download this JavaScript library here, and you can find the document here. I will not explain this library too much in this post. We will put all procedures we want to execute as a function array, and pass into the proper function defined in async.js to let it help us to control the execution sequence, in series or in parallel. Hence we will define an array and put the function for chunk upload into this array. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: ... ... 4: 5: // start to upload each files in chunks 6: var files = $("#upload_files")[0].files; 7: for (var i = 0; i < files.length; i++) { 8: var file = files[i]; 9: var fileSize = file.size; 10: var fileName = file.name; 11: // calculate the start and end byte index for each blocks(chunks) 12: // with the index, file name and index list for future using 13: ... ... 14: 15: // define the function array and push all chunk upload operation into this array 16: blocks.forEach(function (block) { 17: putBlocks.push(function (callback) { 18: }); 19: }); 20: } 21: }); 22: }); As you can see, I used File.slice method to read each chunks based on the start and end byte index we calculated previously, and constructed a temporary HTML form with the file name, chunk index and chunk data through another new feature in HTML5 named FormData. Then post this form to the backend server through jQuery.ajax. This is the key part of our solution. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: ... ... 4: // start to upload each files in chunks 5: var files = $("#upload_files")[0].files; 6: for (var i = 0; i < files.length; i++) { 7: var file = files[i]; 8: var fileSize = file.size; 9: var fileName = file.name; 10: // calculate the start and end byte index for each blocks(chunks) 11: // with the index, file name and index list for future using 12: ... ... 13: // define the function array and push all chunk upload operation into this array 14: blocks.forEach(function (block) { 15: putBlocks.push(function (callback) { 16: // load blob based on the start and end index for each chunks 17: var blob = file.slice(block.start, block.end); 18: // put the file name, index and blob into a temporary from 19: var fd = new FormData(); 20: fd.append("name", block.name); 21: fd.append("index", block.index); 22: fd.append("file", blob); 23: // post the form to backend service (asp.net mvc controller action) 24: $.ajax({ 25: url: "/Home/UploadInFormData", 26: data: fd, 27: processData: false, 28: contentType: "multipart/form-data", 29: type: "POST", 30: success: function (result) { 31: if (!result.success) { 32: alert(result.error); 33: } 34: callback(null, block.index); 35: } 36: }); 37: }); 38: }); 39: } 40: }); Then we will invoke these functions one by one by using the async.js. And once all functions had been executed successfully I invoked another ajax call to the backend service to commit all these chunks (blocks) as the blob in Windows Azure Storage. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: ... ... 4: // start to upload each files in chunks 5: var files = $("#upload_files")[0].files; 6: for (var i = 0; i < files.length; i++) { 7: var file = files[i]; 8: var fileSize = file.size; 9: var fileName = file.name; 10: // calculate the start and end byte index for each blocks(chunks) 11: // with the index, file name and index list for future using 12: ... ... 13: // define the function array and push all chunk upload operation into this array 14: ... ... 15: // invoke the functions one by one 16: // then invoke the commit ajax call to put blocks into blob in azure storage 17: async.series(putBlocks, function (error, result) { 18: var data = { 19: name: fileName, 20: list: list 21: }; 22: $.post("/Home/Commit", data, function (result) { 23: if (!result.success) { 24: alert(result.error); 25: } 26: else { 27: alert("done!"); 28: } 29: }); 30: }); 31: } 32: }); That’s all in the client side. The outline of our logic would be - Calculate the start and end byte index for each chunks based on the block size. - Defined the functions of reading the chunk form file and upload the content to the backend service through ajax. - Execute the functions defined in previous step with “async.js”. - Commit the chunks by invoking the backend service in Windows Azure Storage finally. Save Chunks as Blocks into Blob Storage In above we finished the client size JavaScript code. It uploaded the file in chunks to the backend service which we are going to implement in this step. We will use ASP.NET MVC as our backend service, and it will receive the chunks, upload into Windows Azure Bob Storage in blocks, then finally commit as one blob. As in the client side we uploaded chunks by invoking the ajax call to the URL "/Home/UploadInFormData", I created a new action under the Index controller and it only accepts HTTP POST request. 1: [HttpPost] 2: public JsonResult UploadInFormData() 3: { 4: var error = string.Empty; 5: try 6: { 7: } 8: catch (Exception e) 9: { 10: error = e.ToString(); 11: } 12: 13: return new JsonResult() 14: { 15: Data = new 16: { 17: success = string.IsNullOrWhiteSpace(error), 18: error = error 19: } 20: }; 21: } Then I retrieved the file name, index and the chunk content from the Request.Form object, which was passed from our client side. And then, used the Windows Azure SDK to create a blob container (in this case we will use the container named “test”.) and create a blob reference with the blob name (same as the file name). Then uploaded the chunk as a block of this blob with the index, since in Blob Storage each block must have an index (ID) associated with so that finally we can put all blocks as one blob by specifying their block ID list. 1: [HttpPost] 2: public JsonResult UploadInFormData() 3: { 4: var error = string.Empty; 5: try 6: { 7: var name = Request.Form["name"]; 8: var index = int.Parse(Request.Form["index"]); 9: var file = Request.Files[0]; 10: var id = Convert.ToBase64String(BitConverter.GetBytes(index)); 11: 12: var container = _client.GetContainerReference("test"); 13: container.CreateIfNotExists(); 14: var blob = container.GetBlockBlobReference(name); 15: blob.PutBlock(id, file.InputStream, null); 16: } 17: catch (Exception e) 18: { 19: error = e.ToString(); 20: } 21: 22: return new JsonResult() 23: { 24: Data = new 25: { 26: success = string.IsNullOrWhiteSpace(error), 27: error = error 28: } 29: }; 30: } Next, I created another action to commit the blocks into blob once all chunks had been uploaded. Similarly, I retrieved the blob name from the Request.Form. I also retrieved the chunks ID list, which is the block ID list from the Request.Form in a string format, split them as a list, then invoked the BlockBlob.PutBlockList method. After that our blob will be shown in the container and ready to be download. 1: [HttpPost] 2: public JsonResult Commit() 3: { 4: var error = string.Empty; 5: try 6: { 7: var name = Request.Form["name"]; 8: var list = Request.Form["list"]; 9: var ids = list 10: .Split(',') 11: .Where(id => !string.IsNullOrWhiteSpace(id)) 12: .Select(id => Convert.ToBase64String(BitConverter.GetBytes(int.Parse(id)))) 13: .ToArray(); 14: 15: var container = _client.GetContainerReference("test"); 16: container.CreateIfNotExists(); 17: var blob = container.GetBlockBlobReference(name); 18: blob.PutBlockList(ids); 19: } 20: catch (Exception e) 21: { 22: error = e.ToString(); 23: } 24: 25: return new JsonResult() 26: { 27: Data = new 28: { 29: success = string.IsNullOrWhiteSpace(error), 30: error = error 31: } 32: }; 33: } Now we finished all code we need. The whole process of uploading would be like this below. Below is the full client side JavaScript code. 1: <script type="text/javascript" src="~/Scripts/async.js"></script> 2: <script type="text/javascript"> 3: $(function () { 4: $("#upload_button_blob").click(function () { 5: // assert the browser support html5 6: if (window.File && window.Blob && window.FormData) { 7: alert("Your brwoser is awesome, let's rock!"); 8: } 9: else { 10: alert("Oh man plz update to a modern browser before try is cool stuff out."); 11: return; 12: } 13: 14: // start to upload each files in chunks 15: var files = $("#upload_files")[0].files; 16: for (var i = 0; i < files.length; i++) { 17: var file = files[i]; 18: var fileSize = file.size; 19: var fileName = file.name; 20: 21: // calculate the start and end byte index for each blocks(chunks) 22: // with the index, file name and index list for future using 23: var blockSizeInKB = $("#block_size").val(); 24: var blockSize = blockSizeInKB * 1024; 25: var blocks = []; 26: var offset = 0; 27: var index = 0; 28: var list = ""; 29: while (offset < fileSize) { 30: var start = offset; 31: var end = Math.min(offset + blockSize, fileSize); 32: 33: blocks.push({ 34: name: fileName, 35: index: index, 36: start: start, 37: end: end 38: }); 39: list += index + ","; 40: 41: offset = end; 42: index++; 43: } 44: 45: // define the function array and push all chunk upload operation into this array 46: var putBlocks = []; 47: blocks.forEach(function (block) { 48: putBlocks.push(function (callback) { 49: // load blob based on the start and end index for each chunks 50: var blob = file.slice(block.start, block.end); 51: // put the file name, index and blob into a temporary from 52: var fd = new FormData(); 53: fd.append("name", block.name); 54: fd.append("index", block.index); 55: fd.append("file", blob); 56: // post the form to backend service (asp.net mvc controller action) 57: $.ajax({ 58: url: "/Home/UploadInFormData", 59: data: fd, 60: processData: false, 61: contentType: "multipart/form-data", 62: type: "POST", 63: success: function (result) { 64: if (!result.success) { 65: alert(result.error); 66: } 67: callback(null, block.index); 68: } 69: }); 70: }); 71: }); 72: 73: // invoke the functions one by one 74: // then invoke the commit ajax call to put blocks into blob in azure storage 75: async.series(putBlocks, function (error, result) { 76: var data = { 77: name: fileName, 78: list: list 79: }; 80: $.post("/Home/Commit", data, function (result) { 81: if (!result.success) { 82: alert(result.error); 83: } 84: else { 85: alert("done!"); 86: } 87: }); 88: }); 89: } 90: }); 91: }); 92: </script> And below is the full ASP.NET MVC controller code. 1: public class HomeController : Controller 2: { 3: private CloudStorageAccount _account; 4: private CloudBlobClient _client; 5: 6: public HomeController() 7: : base() 8: { 9: _account = CloudStorageAccount.Parse(CloudConfigurationManager.GetSetting("DataConnectionString")); 10: _client = _account.CreateCloudBlobClient(); 11: } 12: 13: public ActionResult Index() 14: { 15: ViewBag.Message = "Modify this template to jump-start your ASP.NET MVC application."; 16: 17: return View(); 18: } 19: 20: [HttpPost] 21: public JsonResult UploadInFormData() 22: { 23: var error = string.Empty; 24: try 25: { 26: var name = Request.Form["name"]; 27: var index = int.Parse(Request.Form["index"]); 28: var file = Request.Files[0]; 29: var id = Convert.ToBase64String(BitConverter.GetBytes(index)); 30: 31: var container = _client.GetContainerReference("test"); 32: container.CreateIfNotExists(); 33: var blob = container.GetBlockBlobReference(name); 34: blob.PutBlock(id, file.InputStream, null); 35: } 36: catch (Exception e) 37: { 38: error = e.ToString(); 39: } 40: 41: return new JsonResult() 42: { 43: Data = new 44: { 45: success = string.IsNullOrWhiteSpace(error), 46: error = error 47: } 48: }; 49: } 50: 51: [HttpPost] 52: public JsonResult Commit() 53: { 54: var error = string.Empty; 55: try 56: { 57: var name = Request.Form["name"]; 58: var list = Request.Form["list"]; 59: var ids = list 60: .Split(',') 61: .Where(id => !string.IsNullOrWhiteSpace(id)) 62: .Select(id => Convert.ToBase64String(BitConverter.GetBytes(int.Parse(id)))) 63: .ToArray(); 64: 65: var container = _client.GetContainerReference("test"); 66: container.CreateIfNotExists(); 67: var blob = container.GetBlockBlobReference(name); 68: blob.PutBlockList(ids); 69: } 70: catch (Exception e) 71: { 72: error = e.ToString(); 73: } 74: 75: return new JsonResult() 76: { 77: Data = new 78: { 79: success = string.IsNullOrWhiteSpace(error), 80: error = error 81: } 82: }; 83: } 84: } And if we selected a file from the browser we will see our application will upload chunks in the size we specified to the server through ajax call in background, and then commit all chunks in one blob. Then we can find the blob in our Windows Azure Blob Storage. Optimized by Parallel Upload In previous example we just uploaded our file in chunks. This solved the problem that ASP.NET MVC request content size limitation as well as the Windows Azure load balancer timeout. But it might introduce the performance problem since we uploaded chunks in sequence. In order to improve the upload performance we could modify our client side code a bit to make the upload operation invoked in parallel. The good news is that, “async.js” library provides the parallel execution function. If you remembered the code we invoke the service to upload chunks, it utilized “async.series” which means all functions will be executed in sequence. Now we will change this code to “async.parallel”. This will invoke all functions in parallel. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: ... ... 4: // start to upload each files in chunks 5: var files = $("#upload_files")[0].files; 6: for (var i = 0; i < files.length; i++) { 7: var file = files[i]; 8: var fileSize = file.size; 9: var fileName = file.name; 10: // calculate the start and end byte index for each blocks(chunks) 11: // with the index, file name and index list for future using 12: ... ... 13: // define the function array and push all chunk upload operation into this array 14: ... ... 15: // invoke the functions one by one 16: // then invoke the commit ajax call to put blocks into blob in azure storage 17: async.parallel(putBlocks, function (error, result) { 18: var data = { 19: name: fileName, 20: list: list 21: }; 22: $.post("/Home/Commit", data, function (result) { 23: if (!result.success) { 24: alert(result.error); 25: } 26: else { 27: alert("done!"); 28: } 29: }); 30: }); 31: } 32: }); In this way all chunks will be uploaded to the server side at the same time to maximize the bandwidth usage. This should work if the file was not very large and the chunk size was not very small. But for large file this might introduce another problem that too many ajax calls are sent to the server at the same time. So the best solution should be, upload the chunks in parallel with maximum concurrency limitation. The code below specified the concurrency limitation to 4, which means at the most only 4 ajax calls could be invoked at the same time. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: ... ... 4: // start to upload each files in chunks 5: var files = $("#upload_files")[0].files; 6: for (var i = 0; i < files.length; i++) { 7: var file = files[i]; 8: var fileSize = file.size; 9: var fileName = file.name; 10: // calculate the start and end byte index for each blocks(chunks) 11: // with the index, file name and index list for future using 12: ... ... 13: // define the function array and push all chunk upload operation into this array 14: ... ... 15: // invoke the functions one by one 16: // then invoke the commit ajax call to put blocks into blob in azure storage 17: async.parallelLimit(putBlocks, 4, function (error, result) { 18: var data = { 19: name: fileName, 20: list: list 21: }; 22: $.post("/Home/Commit", data, function (result) { 23: if (!result.success) { 24: alert(result.error); 25: } 26: else { 27: alert("done!"); 28: } 29: }); 30: }); 31: } 32: }); Summary In this post we discussed how to upload files in chunks to the backend service and then upload them into Windows Azure Blob Storage in blocks. We focused on the frontend side and leverage three new feature introduced in HTML 5 which are - File.slice: Read part of the file by specifying the start and end byte index. - Blob: File-like interface which contains the part of the file content. - FormData: Temporary form element that we can pass the chunk alone with some metadata to the backend service. Then we discussed the performance consideration of chunk uploading. Sequence upload cannot provide maximized upload speed, but the unlimited parallel upload might crash the browser and server if too many chunks. So we finally came up with the solution to upload chunks in parallel with the concurrency limitation. We also demonstrated how to utilize “async.js” JavaScript library to help us control the asynchronize call and the parallel limitation. Regarding the chunk size and the parallel limitation value there is no “best” value. You need to test vary composition and find out the best one for your particular scenario. It depends on the local bandwidth, client machine cores and the server side (Windows Azure Cloud Service Virtual Machine) cores, memory and bandwidth. Below is one of my performance test result. The client machine was Windows 8 IE 10 with 4 cores. I was using Microsoft Cooperation Network. The web site was hosted on Windows Azure China North data center (in Beijing) with one small web role (1.7GB 1 core CPU, 1.75GB memory with 100Mbps bandwidth). The test cases were - Chunk size: 512KB, 1MB, 2MB, 4MB. - Upload Mode: Sequence, parallel (unlimited), parallel with limit (4 threads, 8 threads). - Chunk Format: base64 string, binaries. - Target file: 100MB. - Each case was tested 3 times. Below is the test result chart. Some thoughts, but not guidance or best practice: - Parallel gets better performance than series. - No significant performance improvement between parallel 4 threads and 8 threads. - Transform with binaries provides better performance than base64. - In all cases, chunk size in 1MB - 2MB gets better performance. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Nested property binding

- by EtherealMonkey

Recently, I have been trying to wrap my mind around the BindingList<T> and INotifyPropertChanged. More specifically - How do I make a collection of objects (having objects as properties) which will allow me to subscribe to events throughout the tree? To that end, I have examined the code offered as examples by others. One such project that I downloaded was Nested Property Binding - CodeProject by "seesharper". Now, the article explains the implementation, but there was a question by "Someone@AnotherWorld" about "INotifyPropertyChanged in nested objects". His question was: Hi, nice stuff! But after a couple of time using your solution I realize the ObjectBindingSource ignores the PropertyChanged event of nested objects. E.g. I've got a class 'Foo' with two properties named 'Name' and 'Bar'. 'Name' is a string an 'Bar' reference an instance of class 'Bar', which has a 'Name' property of type string too and both classes implements INotifyPropertyChanged. With your binding source reading and writing with both properties ('Name' and 'Bar_Name') works fine but the PropertyChanged event works only for the 'Name' property, because the binding source listen only for events of 'Foo'. One workaround is to retrigger the PropertyChanged event in the appropriate class (here 'Foo'). What's very unclean! The other approach would be to extend ObjectBindingSource so that all owner of nested property which implements INotifyPropertyChanged get used for receive changes, but how? Thanks! I had asked about BindingList<T> yesterday and received a good answer from Aaronaught. In my question, I had a similar point as "Someone@AnotherWorld": if Keywords were to implement INotifyPropertyChanged, would changes be accessible to the BindingList through the ScannedImage object? To which Aaronaught's response was: No, they will not. BindingList only looks at the specific object in the list, it has no ability to scan all dependencies and monitor everything in the graph (nor would that always be a good idea, if it were possible). I understand Aaronaught's comment regarding this behavior not necessarily being a good idea. Additionally, his suggestion to have my bound object "relay" events on behalf of it's member objects works fine and is perfectly acceptable. For me, "re-triggering" the PropertyChanged event does not seem so unclean as "Someone@AnotherWorld" laments. I do understand why he protests - in the interest of loosely coupled objects. However, I believe that coupling between objects that are part of a composition is logical and not so undesirable as this may be in other scenarios. (I am a newb, so I could be waaayyy off base.) Anyway, in the interest of exploring an answer to the question by "Someone@AnotherWorld", I altered the MainForm.cs file of the example project from Nested Property Binding - CodeProject by "seesharper" to the following: using System; using System.Collections.Generic; using System.ComponentModel; using System.Core.ComponentModel; using System.Windows.Forms; namespace ObjectBindingSourceDemo { public partial class MainForm : Form { private readonly List<Customer> _customers = new List<Customer>(); private readonly List<Product> _products = new List<Product>(); private List<Order> orders; public MainForm() { InitializeComponent(); dataGridView1.AutoGenerateColumns = false; dataGridView2.AutoGenerateColumns = false; CreateData(); } private void CreateData() { _customers.Add( new Customer(1, "Jane Wilson", new Address("98104", "6657 Sand Pointe Lane", "Seattle", "USA"))); _customers.Add( new Customer(1, "Bill Smith", new Address("94109", "5725 Glaze Drive", "San Francisco", "USA"))); _customers.Add( new Customer(1, "Samantha Brown", null)); _products.Add(new Product(1, "Keyboard", 49.99)); _products.Add(new Product(2, "Mouse", 10.99)); _products.Add(new Product(3, "PC", 599.99)); _products.Add(new Product(4, "Monitor", 299.99)); _products.Add(new Product(5, "LapTop", 799.99)); _products.Add(new Product(6, "Harddisc", 89.99)); customerBindingSource.DataSource = _customers; productBindingSource.DataSource = _products; orders = new List<Order>(); orders.Add(new Order(1, DateTime.Now, _customers[0])); orders.Add(new Order(2, DateTime.Now, _customers[1])); orders.Add(new Order(3, DateTime.Now, _customers[2])); #region Added by me OrderLine orderLine1 = new OrderLine(_products[0], 1); OrderLine orderLine2 = new OrderLine(_products[1], 3); orderLine1.PropertyChanged += new PropertyChangedEventHandler(OrderLineChanged); orderLine2.PropertyChanged += new PropertyChangedEventHandler(OrderLineChanged); orders[0].OrderLines.Add(orderLine1); orders[0].OrderLines.Add(orderLine2); #endregion // Removed by me in lieu of region above. //orders[0].OrderLines.Add(new OrderLine(_products[0], 1)); //orders[0].OrderLines.Add(new OrderLine(_products[1], 3)); ordersBindingSource.DataSource = orders; } #region Added by me // Have to wait until the form is Shown to wire up the events // for orderDetailsBindingSource. Otherwise, they are triggered // during MainForm().InitializeComponent(). private void MainForm_Shown(object sender, EventArgs e) { orderDetailsBindingSource.AddingNew += new AddingNewEventHandler(orderDetailsBindSrc_AddingNew); orderDetailsBindingSource.CurrentItemChanged += new EventHandler(orderDetailsBindSrc_CurrentItemChanged); orderDetailsBindingSource.ListChanged += new ListChangedEventHandler(orderDetailsBindSrc_ListChanged); } private void orderDetailsBindSrc_AddingNew( object sender, AddingNewEventArgs e) { } private void orderDetailsBindSrc_CurrentItemChanged( object sender, EventArgs e) { } private void orderDetailsBindSrc_ListChanged( object sender, ListChangedEventArgs e) { ObjectBindingSource bindingSource = (ObjectBindingSource)sender; if (!(bindingSource.Current == null)) { // Unsure if GetType().ToString() is required b/c ToString() // *seems* // to return the same value. if (bindingSource.Current.GetType().ToString() == "ObjectBindingSourceDemo.OrderLine") { if (e.ListChangedType == ListChangedType.ItemAdded) { // I wish that I knew of a way to determine // if the 'PropertyChanged' delegate assignment is null. // I don't like the current test, but it seems to work. if (orders[ ordersBindingSource.Position].OrderLines[ e.NewIndex].Product == null) { orders[ ordersBindingSource.Position].OrderLines[ e.NewIndex].PropertyChanged += new PropertyChangedEventHandler( OrderLineChanged); } } if (e.ListChangedType == ListChangedType.ItemDeleted) { // Will throw exception when leaving // an OrderLine row with unitialized properties. // // I presume this is because the item // has already been 'disposed' of at this point. // *but* // Will it be actually be released from memory // if the delegate assignment for PropertyChanged // was never removed??? if (orders[ ordersBindingSource.Position].OrderLines[ e.NewIndex].Product != null) { orders[ ordersBindingSource.Position].OrderLines[ e.NewIndex].PropertyChanged -= new PropertyChangedEventHandler( OrderLineChanged); } } } } } private void OrderLineChanged(object sender, PropertyChangedEventArgs e) { MessageBox.Show(e.PropertyName, "Property Changed:"); } #endregion } } In the method private void orderDetailsBindSrc_ListChanged(object sender, ListChangedEventArgs e) I am able to hook up the PropertyChangedEventHandler to the OrderLine object as it is being created. However, I cannot seem to find a way to unhook the PropertyChangedEventHandler from the OrderLine object before it is being removed from the orders[i].OrderLines list. So, my questions are: Am I simply trying to do something that is very, very wrong here? Will the OrderLines object that I add the delegate assignments to ever be released from memory if the assignment is not removed? Is there a "sane" method of achieving this scenario? Also, note that this question is not specifically related to my prior. I have actually solved the issue which had prompted me to inquire before. However, I have reached a point with this particular topic of discovery where my curiosity has exceeded my patience - hopefully someone here can shed some light on this?

Read the article

What’s New in ASP.NET 4.0 Part Two: WebForms and Visual Studio Enhancements

- by Rick Strahl

In the last installment I talked about the core changes in the ASP.NET runtime that I’ve been taking advantage of. In this column, I’ll cover the changes to the Web Forms engine and some of the cool improvements in Visual Studio that make Web and general development easier. WebForms The WebForms engine is the area that has received most significant changes in ASP.NET 4.0. Probably the most widely anticipated features are related to managing page client ids and of ViewState on WebForm pages. Take Control of Your ClientIDs Unique ClientID generation in ASP.NET has been one of the most complained about “features” in ASP.NET. Although there’s a very good technical reason for these unique generated ids - they guarantee unique ids for each and every server control on a page - these unique and generated ids often get in the way of client-side JavaScript development and CSS styling as it’s often inconvenient and fragile to work with the long, generated ClientIDs. In ASP.NET 4.0 you can now specify an explicit client id mode on each control or each naming container parent control to control how client ids are generated. By default, ASP.NET generates mangled client ids for any control contained in a naming container (like a Master Page, or a User Control for example). The key to ClientID management in ASP.NET 4.0 are the new ClientIDMode and ClientIDRowSuffix properties. ClientIDMode supports four different ClientID generation settings shown below. For the following examples, imagine that you have a Textbox control named txtName inside of a master page control container on a WebForms page. <%@Page Language="C#" MasterPageFile="~/Site.Master" CodeBehind="WebForm2.aspx.cs" Inherits="WebApplication1.WebForm2" %> <asp:Content ID="content" ContentPlaceHolderID="content" runat="server" ClientIDMode="Static" > <asp:TextBox runat="server" ID="txtName" /> </asp:Content> The four available ClientIDMode values are: AutoID This is the existing behavior in ASP.NET 1.x-3.x where full naming container munging takes place. <input name="ctl00$content$txtName" type="text" id="ctl00_content_txtName" /> This should be familiar to any ASP.NET developer and results in fairly unpredictable client ids that can easily change if the containership hierarchy changes. For example, removing the master page changes the name in this case, so if you were to move a block of script code that works against the control to a non-Master page, the script code immediately breaks. Static This option is the most deterministic setting that forces the control’s ClientID to use its ID value directly. No naming container naming at all is applied and you end up with clean client ids: <input name="ctl00$content$txtName" type="text" id="txtName" /> Note that the name property which is used for postback variables to the server still is munged, but the ClientID property is displayed simply as the ID value that you have assigned to the control. This option is what most of us want to use, but you have to be clear on that because it can potentially cause conflicts with other controls on the page. If there are several instances of the same naming container (several instances of the same user control for example) there can easily be a client id naming conflict. Note that if you assign Static to a data-bound control, like a list child control in templates, you do not get unique ids either, so for list controls where you rely on unique id for child controls, you’ll probably want to use Predictable rather than Static. I’ll write more on this a little later when I discuss ClientIDRowSuffix. Predictable The previous two values are pretty self-explanatory. Predictable however, requires some explanation. To me at least it’s not in the least bit predictable. MSDN defines this value as follows: This algorithm is used for controls that are in data-bound controls. The ClientID value is generated by concatenating the ClientID value of the parent naming container with the ID value of the control. If the control is a data-bound control that generates multiple rows, the value of the data field specified in the ClientIDRowSuffix property is added at the end. For the GridView control, multiple data fields can be specified. If the ClientIDRowSuffix property is blank, a sequential number is added at the end instead of a data-field value. Each segment is separated by an underscore character (_). The key that makes this value a bit confusing is that it relies on the parent NamingContainer’s ClientID to build its own ClientID value. This effectively means that the value is not predictable at all but rather very tightly coupled to the parent naming container’s ClientIDMode setting. For my simple textbox example, if the ClientIDMode property of the parent naming container (Page in this case) is set to “Predictable” you’ll get this: <input name="ctl00$content$txtName" type="text" id="content_txtName" /> which gives an id that based on walking up to the currently active naming container (the MasterPage content container) and starting the id formatting from there downward. Think of this as a semi unique name that’s guaranteed unique only for the naming container. If, on the other hand, the Page is set to “AutoID” you get the following with Predictable on txtName: <input name="ctl00$content$txtName" type="text" id="ctl00_content_txtName" /> The latter is effectively the same as if you specified AutoID because it inherits the AutoID naming from the Page and Content Master Page control of the page. But again - predictable behavior always depends on the parent naming container and how it generates its id, so the id may not always be exactly the same as the AutoID generated value because somewhere in the NamingContainer chain the ClientIDMode setting may be set to a different value. For example, if you had another naming container in the middle that was set to Static you’d end up effectively with an id that starts with the NamingContainers id rather than the whole ctl000_content munging. The most common use for Predictable is likely to be for data-bound controls, which results in each data bound item getting a unique ClientID. Unfortunately, even here the behavior can be very unpredictable depending on which data-bound control you use - I found significant differences in how template controls in a GridView behave from those that are used in a ListView control. For example, GridView creates clean child ClientIDs, while ListView still has a naming container in the ClientID, presumably because of the template container on which you can’t set ClientIDMode. Predictable is useful, but only if all naming containers down the chain use this setting. Otherwise you’re right back to the munged ids that are pretty unpredictable. Another property, ClientIDRowSuffix, can be used in combination with ClientIDMode of Predictable to force a suffix onto list client controls. For example: <asp:GridView runat="server" ID="gvItems" AutoGenerateColumns="false" ClientIDMode="Static" ClientIDRowSuffix="Id"> <Columns> <asp:TemplateField> <ItemTemplate> <asp:Label runat="server" id="txtName" Text='<%# Eval("Name") %>' ClientIDMode="Predictable"/> </ItemTemplate> </asp:TemplateField> <asp:TemplateField> <ItemTemplate> <asp:Label runat="server" id="txtId" Text='<%# Eval("Id") %>' ClientIDMode="Predictable" /> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> generates client Ids inside of a column in the master page described earlier: <td> <span id="txtName_0">Rick</span> </td> where the value after the underscore is the ClientIDRowSuffix field - in this case “Id” of the item data bound to the control. Note that all of the child controls require ClientIDMode=”Predictable” in order for the ClientIDRowSuffix to be applied, and the parent GridView controls need to be set to Static either explicitly or via Naming Container inheritance to give these simple names. It’s a bummer that ClientIDRowSuffix doesn’t work with Static to produce this automatically. Another real problem is that other controls process the ClientIDMode differently. For example, a ListView control processes the Predictable ClientIDMode differently and produces the following with the Static ListView and Predictable child controls: <span id="ctrl0_txtName_0">Rick</span> I couldn’t even figure out a way using ClientIDMode to get a simple ID that also uses a suffix short of falling back to manually generated ids using <%= %> expressions instead. Given the inconsistencies inside of list controls using <%= %>, ids for the ListView might not be a bad idea anyway. Inherit The final setting is Inherit, which is the default for all controls except Page. This means that controls by default inherit the parent naming container’s ClientIDMode setting. For more detailed information on ClientID behavior and different scenarios you can check out a blog post of mine on this subject: http://www.west-wind.com/weblog/posts/54760.aspx. ClientID Enhancements Summary The ClientIDMode property is a welcome addition to ASP.NET 4.0. To me this is probably the most useful WebForms feature as it allows me to generate clean IDs simply by setting ClientIDMode="Static" on either the page or inside of Web.config (in the Pages section) which applies the setting down to the entire page which is my 95% scenario. For the few cases when it matters - for list controls and inside of multi-use user controls or custom server controls) - I can use Predictable or even AutoID to force controls to unique names. For application-level page development, this is easy to accomplish and provides maximum usability for working with client script code against page controls. ViewStateMode Another area of large criticism for WebForms is ViewState. ViewState is used internally by ASP.NET to persist page-level changes to non-postback properties on controls as pages post back to the server. It’s a useful mechanism that works great for the overall mechanics of WebForms, but it can also cause all sorts of overhead for page operation as ViewState can very quickly get out of control and consume huge amounts of bandwidth in your page content. ViewState can also wreak havoc with client-side scripting applications that modify control properties that are tracked by ViewState, which can produce very unpredictable results on a Postback after client-side updates. Over the years in my own development, I’ve often turned off ViewState on pages to reduce overhead. Yes, you lose some functionality, but you can easily implement most of the common functionality in non-ViewState workarounds. Relying less on heavy ViewState controls and sticking with simpler controls or raw HTML constructs avoids getting around ViewState problems. In ASP.NET 3.x and prior, it wasn’t easy to control ViewState - you could turn it on or off and if you turned it off at the page or web.config level, you couldn’t turn it back on for specific controls. In short, it was an all or nothing approach. With ASP.NET 4.0, the new ViewStateMode property gives you more control. It allows you to disable ViewState globally either on the page or web.config level and then turn it back on for specific controls that might need it. ViewStateMode only works when EnableViewState="true" on the page or web.config level (which is the default). You can then use ViewStateMode of Disabled, Enabled or Inherit to control the ViewState settings on the page. If you’re shooting for minimal ViewState usage, the ideal situation is to set ViewStateMode to disabled on the Page or web.config level and only turn it back on particular controls: <%@Page Language="C#" CodeBehind="WebForm2.aspx.cs" Inherits="Westwind.WebStore.WebForm2" ClientIDMode="Static" ViewStateMode="Disabled" EnableViewState="true" %>  <asp:TextBox runat="server" ID="txtName" ViewStateMode="Enabled" />  <asp:TextBox runat="server" ID="txtAddress" /> Note that the EnableViewState="true" at the Page level isn’t required since it’s the default, but it’s important that the value is true. ViewStateMode has no effect if EnableViewState="false" at the page level. The main benefit of ViewStateMode is that it allows you to more easily turn off ViewState for most of the page and enable only a few key controls that might need it. For me personally, this is a perfect combination as most of my WebForm apps can get away without any ViewState at all. But some controls - especially third party controls - often don’t work well without ViewState enabled, and now it’s much easier to selectively enable controls rather than the old way, which required you to pretty much turn off ViewState for all controls that you didn’t want ViewState on. Inline HTML Encoding HTML encoding is an important feature to prevent cross-site scripting attacks in data entered by users on your site. In order to make it easier to create HTML encoded content, ASP.NET 4.0 introduces a new Expression syntax using <%: %> to encode string values. The encoding expression syntax looks like this: <%: "<script type='text/javascript'>" + "alert('Really?');</script>" %> which produces properly encoded HTML: <script type='text/javascript' >alert('Really?');</script> Effectively this is a shortcut to: <%= HttpUtility.HtmlEncode( "<script type='text/javascript'>" + "alert('Really?');</script>") %> Of course the <%: %> syntax can also evaluate expressions just like <%= %> so the more common scenario applies this expression syntax against data your application is displaying. Here’s an example displaying some data model values: <%: Model.Address.Street %> This snippet shows displaying data from your application’s data store or more importantly, from data entered by users. Anything that makes it easier and less verbose to HtmlEncode text is a welcome addition to avoid potential cross-site scripting attacks. Although I listed Inline HTML Encoding here under WebForms, anything that uses the WebForms rendering engine including ASP.NET MVC, benefits from this feature. ScriptManager Enhancements The ASP.NET ScriptManager control in the past has introduced some nice ways to take programmatic and markup control over script loading, but there were a number of shortcomings in this control. The ASP.NET 4.0 ScriptManager has a number of improvements that make it easier to control script loading and addresses a few of the shortcomings that have often kept me from using the control in favor of manual script loading. The first is the AjaxFrameworkMode property which finally lets you suppress loading the ASP.NET AJAX runtime. Disabled doesn’t load any ASP.NET AJAX libraries, but there’s also an Explicit mode that lets you pick and choose the library pieces individually and reduce the footprint of ASP.NET AJAX script included if you are using the library. There’s also a new EnableCdn property that forces any script that has a new WebResource attribute CdnPath property set to a CDN supplied URL. If the script has this Attribute property set to a non-null/empty value and EnableCdn is enabled on the ScriptManager, that script will be served from the specified CdnPath. [assembly: WebResource( "Westwind.Web.Resources.ww.jquery.js", "application/x-javascript", CdnPath = "http://mysite.com/scripts/ww.jquery.min.js")] Cool, but a little too static for my taste since this value can’t be changed at runtime to point at a debug script as needed, for example. Assembly names for loading scripts from resources can now be simple names rather than fully qualified assembly names, which make it less verbose to reference scripts from assemblies loaded from your bin folder or the assembly reference area in web.config: <asp:ScriptManager runat="server" id="Id" EnableCdn="true" AjaxFrameworkMode="disabled"> <Scripts> <asp:ScriptReference Name="Westwind.Web.Resources.ww.jquery.js" Assembly="Westwind.Web" /> </Scripts> </asp:ScriptManager> The ScriptManager in 4.0 also supports script combining via the CompositeScript tag, which allows you to very easily combine scripts into a single script resource served via ASP.NET. Even nicer: You can specify the URL that the combined script is served with. Check out the following script manager markup that combines several static file scripts and a script resource into a single ASP.NET served resource from a static URL (allscripts.js): <asp:ScriptManager runat="server" id="Id" EnableCdn="true" AjaxFrameworkMode="disabled"> <CompositeScript Path="~/scripts/allscripts.js"> <Scripts> <asp:ScriptReference Path="~/scripts/jquery.js" /> <asp:ScriptReference Path="~/scripts/ww.jquery.js" /> <asp:ScriptReference Name="Westwind.Web.Resources.editors.js" Assembly="Westwind.Web" /> </Scripts> </CompositeScript> </asp:ScriptManager> When you render this into HTML, you’ll see a single script reference in the page: <script src="scripts/allscripts.debug.js" type="text/javascript"></script> All you need to do to make this work is ensure that allscripts.js and allscripts.debug.js exist in the scripts folder of your application - they can be empty but the file has to be there. This is pretty cool, but you want to be real careful that you use unique URLs for each combination of scripts you combine or else browser and server caching will easily screw you up royally. The script manager also allows you to override native ASP.NET AJAX scripts now as any script references defined in the Scripts section of the ScriptManager trump internal references. So if you want custom behavior or you want to fix a possible bug in the core libraries that normally are loaded from resources, you can now do this simply by referencing the script resource name in the Name property and pointing at System.Web for the assembly. Not a common scenario, but when you need it, it can come in real handy. Still, there are a number of shortcomings in this control. For one, the ScriptManager and ClientScript APIs still have no common entry point so control developers are still faced with having to check and support both APIs to load scripts so that controls can work on pages that do or don’t have a ScriptManager on the page. The CdnUrl is static and compiled in, which is very restrictive. And finally, there’s still no control over where scripts get loaded on the page - ScriptManager still injects scripts into the middle of the HTML markup rather than in the header or optionally the footer. This, in turn, means there is little control over script loading order, which can be problematic for control developers. MetaDescription, MetaKeywords Page Properties There are also a number of additional Page properties that correspond to some of the other features discussed in this column: ClientIDMode, ClientTarget and ViewStateMode. Another minor but useful feature is that you can now directly access the MetaDescription and MetaKeywords properties on the Page object to set the corresponding meta tags programmatically. Updating these values programmatically previously required either <%= %> expressions in the page markup or dynamic insertion of literal controls into the page. You can now just set these properties programmatically on the Page object in any Control derived class on the page or the Page itself: Page.MetaKeywords = "ASP.NET,4.0,New Features"; Page.MetaDescription = "This article discusses the new features in ASP.NET 4.0"; Note, that there’s no corresponding ASP.NET tag for the HTML Meta element, so the only way to specify these values in markup and access them is via the @Page tag: <%@Page Language="C#" CodeBehind="WebForm2.aspx.cs" Inherits="Westwind.WebStore.WebForm2" ClientIDMode="Static" MetaDescription="Article that discusses what's new in ASP.NET 4.0" MetaKeywords="ASP.NET,4.0,New Features" %> Nothing earth shattering but quite convenient. Visual Studio 2010 Enhancements for Web Development For Web development there are also a host of editor enhancements in Visual Studio 2010. Some of these are not Web specific but they are useful for Web developers in general. Text Editors Throughout Visual Studio 2010, the text editors have all been updated to a new core engine based on WPF which provides some interesting new features for various code editors including the nice ability to zoom in and out with Ctrl-MouseWheel to quickly change the size of text. There are many more API options to control the editor and although Visual Studio 2010 doesn’t yet use many of these features, we can look forward to enhancements in add-ins and future editor updates from the various language teams that take advantage of the visual richness that WPF provides to editing. On the negative side, I’ve noticed that occasionally the code editor and especially the HTML and JavaScript editors will lose the ability to use various navigation keys like arrows, back and delete keys, which requires closing and reopening the documents at times. This issue seems to be well documented so I suspect this will be addressed soon with a hotfix or within the first service pack. Overall though, the code editors work very well, especially given that they were re-written completely using WPF, which was one of my big worries when I first heard about the complete redesign of the editors. Multi-Targeting Visual Studio now targets all versions of the .NET framework from 2.0 forward. You can use Visual Studio 2010 to work on your ASP.NET 2, 3.0 and 3.5 applications which is a nice way to get your feet wet with the new development environment without having to make changes to existing applications. It’s nice to have one tool to work in for all the different versions. Multi-Monitor Support One cool feature of Visual Studio 2010 is the ability to drag windows out of the Visual Studio environment and out onto the desktop including onto another monitor easily. Since Web development often involves working with a host of designers at the same time - visual designer, HTML markup window, code behind and JavaScript editor - it’s really nice to be able to have a little more screen real estate to work on each of these editors. Microsoft made a welcome change in the environment. IntelliSense Snippets for HTML and JavaScript Editors The HTML and JavaScript editors now finally support IntelliSense scripts to create macro-based template expansions that have been in the core C# and Visual Basic code editors since Visual Studio 2005. Snippets allow you to create short XML-based template definitions that can act as static macros or real templates that can have replaceable values that can be embedded into the expanded text. The XML syntax for these snippets is straight forward and it’s pretty easy to create custom snippets manually. You can easily create snippets using XML and store them in your custom snippets folder (C:\Users\rstrahl\Documents\Visual Studio 2010\Code Snippets\Visual Web Developer\My HTML Snippets and My JScript Snippets), but it helps to use one of the third-party tools that exist to simplify the process for you. I use SnippetEditor, by Bill McCarthy, which makes short work of creating snippets interactively (http://snippeteditor.codeplex.com/). Note: You may have to manually add the Visual Studio 2010 User specific Snippet folders to this tool to see existing ones you’ve created. Code snippets are some of the biggest time savers and HTML editing more than anything deals with lots of repetitive tasks that lend themselves to text expansion. Visual Studio 2010 includes a slew of built-in snippets (that you can also customize!) and you can create your own very easily. If you haven’t done so already, I encourage you to spend a little time examining your coding patterns and find the repetitive code that you write and convert it into snippets. I’ve been using CodeRush for this for years, but now you can do much of the basic expansion natively for HTML and JavaScript snippets. jQuery Integration Is Now Native jQuery is a popular JavaScript library and recently Microsoft has recently stated that it will become the primary client-side scripting technology to drive higher level script functionality in various ASP.NET Web projects that Microsoft provides. In Visual Studio 2010, the default full project template includes jQuery as part of a new project including the support files that provide IntelliSense (-vsdoc files). IntelliSense support for jQuery is now also baked into Visual Studio 2010, so unlike Visual Studio 2008 which required a separate download, no further installs are required for a rich IntelliSense experience with jQuery. Summary ASP.NET 4.0 brings many useful improvements to the platform, but thankfully most of the changes are incremental changes that don’t compromise backwards compatibility and they allow developers to ease into the new features one feature at a time. None of the changes in ASP.NET 4.0 or Visual Studio 2010 are monumental or game changers. The bigger features are language and .NET Framework changes that are also optional. This ASP.NET and tools release feels more like fine tuning and getting some long-standing kinks worked out of the platform. It shows that the ASP.NET team is dedicated to paying attention to community feedback and responding with changes to the platform and development environment based on this feedback. If you haven’t gotten your feet wet with ASP.NET 4.0 and Visual Studio 2010, there’s no reason not to give it a shot now - the ASP.NET 4.0 platform is solid and Visual Studio 2010 works very well for a brand new release. Check it out. © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET

Read the article

I need some help with either my SQL or my PHP I do not know which...

- by sico87

Read the article

Did I lose my RAID again?

- by BarsMonster

Hi! A little history: 2 years ago I was really excited to find out that mdadm is so powerful that it even can reshape arrays, so you can start with a smaller array and then grow it as you need. I've bought 3x1Tb drives and made a RAID-5. It was fine for a year. Then I bought 2x more, and tried to reshape to RAID-6 out of 5 drives, and due to some mess with superblock versions, lost all content. Had to rebuild it from scratch, but 2Tb of data were gone. Yesterday I bought 2 more drives, and this time I had everything: properly built array, UPS. I've disabled write intent map, added 2 new drives as spares and run a command to grow array to 7-disks. It started working, but speed was ridiculously slow, ~100kb/sec. After processing first 37Mb at such an amazing speed, one of old HDDs fails. I properly shutdown the PC and disconnected the failed drive. After bootup it appeared that it recreated the intent map as it was still in mdadm config, so I removed it from config and rebooted again. Now all I see is that all mdadm processes deadlock, and don't do anything. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1937 root 20 0 12992 608 444 D 0 0.1 0:00.00 mdadm 2283 root 20 0 12992 852 704 D 0 0.1 0:00.01 mdadm 2287 root 20 0 0 0 0 D 0 0.0 0:00.01 md0_reshape 2288 root 18 -2 12992 820 676 D 0 0.1 0:00.01 mdadm And all I see in mdstat is: $ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sdb1[1] sdg1[4] sdf1[7] sde1[6] sdd1[0] sdc1[5] 2929683456 blocks super 1.2 level 6, 1024k chunk, algorithm 2 [7/6] [UU_UUUU] [>....................] reshape = 0.0% (37888/976561152) finish=567604147.2min speed=0K/sec I've already tried mdadm 2.6.7, 3.1.4 and 3.2 - nothing helps. Did I lose my data again? Any suggestions on how can I make this work? OS is Ubuntu Server 10.04.2. PS. Needless to say, the data is inaccessible - I cannot mount /dev/md0 to save the most valuable data. You can see my disappointment - the very specific thing I was excited about failed twice taking 5Tb of my data with it. Update: It appears there is some nice info in kern.log: 21:38:48 ...: [ 166.522055] raid5: reshape will continue 21:38:48 ...: [ 166.522085] raid5: device sdb1 operational as raid disk 1 21:38:48 ...: [ 166.522091] raid5: device sdg1 operational as raid disk 4 21:38:48 ...: [ 166.522097] raid5: device sdf1 operational as raid disk 5 21:38:48 ...: [ 166.522102] raid5: device sde1 operational as raid disk 6 21:38:48 ...: [ 166.522107] raid5: device sdd1 operational as raid disk 0 21:38:48 ...: [ 166.522111] raid5: device sdc1 operational as raid disk 3 21:38:48 ...: [ 166.523942] raid5: allocated 7438kB for md0 21:38:48 ...: [ 166.524041] 1: w=1 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524050] 4: w=2 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524056] 5: w=3 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524062] 6: w=4 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524068] 0: w=5 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524073] 3: w=6 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524079] raid5: raid level 6 set md0 active with 6 out of 7 devices, algorithm 2 21:38:48 ...: [ 166.524519] RAID5 conf printout: 21:38:48 ...: [ 166.524523] --- rd:7 wd:6 21:38:48 ...: [ 166.524528] disk 0, o:1, dev:sdd1 21:38:48 ...: [ 166.524532] disk 1, o:1, dev:sdb1 21:38:48 ...: [ 166.524537] disk 3, o:1, dev:sdc1 21:38:48 ...: [ 166.524541] disk 4, o:1, dev:sdg1 21:38:48 ...: [ 166.524545] disk 5, o:1, dev:sdf1 21:38:48 ...: [ 166.524550] disk 6, o:1, dev:sde1 21:38:48 ...: [ 166.524553] ...ok start reshape thread 21:38:48 ...: [ 166.524727] md0: detected capacity change from 0 to 2999995858944 21:38:48 ...: [ 166.524735] md: reshape of RAID array md0 21:38:48 ...: [ 166.524740] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. 21:38:48 ...: [ 166.524745] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reshape. 21:38:48 ...: [ 166.524756] md: using 128k window, over a total of 976561152 blocks. 21:39:05 ...: [ 166.525013] md0: 21:42:04 ...: [ 362.520063] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520068] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520073] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:42:04 ...: [ 362.520083] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520092] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:42:04 ...: [ 362.520100] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:42:04 ...: [ 362.520107] Call Trace: 21:42:04 ...: [ 362.520133] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:42:04 ...: [ 362.520148] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:42:04 ...: [ 362.520159] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:42:04 ...: [ 362.520169] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:42:04 ...: [ 362.520179] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520188] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:42:04 ...: [ 362.520194] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:42:04 ...: [ 362.520205] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:42:04 ...: [ 362.520214] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:42:04 ...: [ 362.520222] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:42:04 ...: [ 362.520230] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:42:04 ...: [ 362.520236] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:42:04 ...: [ 362.520244] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:42:04 ...: [ 362.520251] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:42:04 ...: [ 362.520258] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:42:04 ...: [ 362.520265] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:42:04 ...: [ 362.520272] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:42:04 ...: [ 362.520279] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:42:04 ...: [ 362.520285] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:42:04 ...: [ 362.520290] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:42:04 ...: [ 362.520297] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:42:04 ...: [ 362.520304] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:42:04 ...: [ 362.520310] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:42:04 ...: [ 362.520317] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:42:04 ...: [ 362.520324] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:42:04 ...: [ 362.520331] [<ffffffff811a7938>] check_partition+0x138/0x190 21:42:04 ...: [ 362.520338] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:42:04 ...: [ 362.520344] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:42:04 ...: [ 362.520350] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:42:04 ...: [ 362.520356] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:42:04 ...: [ 362.520362] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:42:04 ...: [ 362.520369] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:42:04 ...: [ 362.520377] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:42:04 ...: [ 362.520385] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:42:04 ...: [ 362.520391] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:42:04 ...: [ 362.520398] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:42:04 ...: [ 362.520406] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:42:04 ...: [ 362.520414] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:42:04 ...: [ 362.520421] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:42:04 ...: [ 362.520428] [<ffffffff811418b0>] sys_open+0x20/0x30 21:42:04 ...: [ 362.520437] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:42:04 ...: [ 362.520446] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520450] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520454] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:42:04 ...: [ 362.520462] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520470] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:42:04 ...: [ 362.520478] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:42:04 ...: [ 362.520485] Call Trace: 21:42:04 ...: [ 362.520495] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:42:04 ...: [ 362.520502] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:42:04 ...: [ 362.520508] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:42:04 ...: [ 362.520514] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:42:04 ...: [ 362.520520] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:42:04 ...: [ 362.520527] [<ffffffff81145375>] __fput+0xf5/0x210 21:42:04 ...: [ 362.520534] [<ffffffff811454b5>] fput+0x25/0x30 21:42:04 ...: [ 362.520540] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:42:04 ...: [ 362.520546] [<ffffffff81141697>] sys_close+0xb7/0x120 21:42:04 ...: [ 362.520553] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:42:04 ...: [ 362.520559] INFO: task md0_reshape:2287 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520563] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520567] md0_reshape D ffff88003aee96f0 0 2287 2 0x00000000 21:42:04 ...: [ 362.520575] ffff88003cf05a70 0000000000000046 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520582] ffff88003aee9aa8 ffff88003cf05fd8 0000000000015bc0 ffff88003aee96f0 21:42:04 ...: [ 362.520590] 0000000000015bc0 ffff88003cf05fd8 0000000000015bc0 ffff88003aee9aa8 21:42:04 ...: [ 362.520597] Call Trace: 21:42:04 ...: [ 362.520608] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:42:04 ...: [ 362.520616] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:42:04 ...: [ 362.520626] [<ffffffffa0226f80>] reshape_request+0x4c0/0x9a0 [raid456] 21:42:04 ...: [ 362.520634] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520644] [<ffffffffa022777a>] sync_request+0x31a/0x3a0 [raid456] 21:42:04 ...: [ 362.520651] [<ffffffff81052713>] ? __wake_up+0x53/0x70 21:42:04 ...: [ 362.520658] [<ffffffff814156b1>] md_do_sync+0x621/0xbb0 21:42:04 ...: [ 362.520668] [<ffffffff810387b9>] ? default_spin_lock_flags+0x9/0x10 21:42:04 ...: [ 362.520675] [<ffffffff8141640c>] md_thread+0x5c/0x130 21:42:04 ...: [ 362.520681] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520688] [<ffffffff814163b0>] ? md_thread+0x0/0x130 21:42:04 ...: [ 362.520694] [<ffffffff81084416>] kthread+0x96/0xa0 21:42:04 ...: [ 362.520701] [<ffffffff810131ea>] child_rip+0xa/0x20 21:42:04 ...: [ 362.520707] [<ffffffff81084380>] ? kthread+0x0/0xa0 21:42:04 ...: [ 362.520713] [<ffffffff810131e0>] ? child_rip+0x0/0x20 21:42:04 ...: [ 362.520718] INFO: task mdadm:2288 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520721] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520725] mdadm D 0000000000000000 0 2288 1 0x00000000 21:42:04 ...: [ 362.520733] ffff88002cca9c18 0000000000000086 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520741] ffff88003aee83b8 ffff88002cca9fd8 0000000000015bc0 ffff88003aee8000 21:42:04 ...: [ 362.520748] 0000000000015bc0 ffff88002cca9fd8 0000000000015bc0 ffff88003aee83b8 21:42:04 ...: [ 362.520755] Call Trace: 21:42:04 ...: [ 362.520763] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:42:04 ...: [ 362.520771] [<ffffffff812a6d50>] ? exact_match+0x0/0x10 21:42:04 ...: [ 362.520777] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:42:04 ...: [ 362.520783] [<ffffffff811742c8>] __blkdev_get+0x68/0x3d0 21:42:04 ...: [ 362.520790] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:42:04 ...: [ 362.520795] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:42:04 ...: [ 362.520801] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:42:04 ...: [ 362.520808] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:42:04 ...: [ 362.520815] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:42:04 ...: [ 362.520821] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:42:04 ...: [ 362.520828] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:42:04 ...: [ 362.520834] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:42:04 ...: [ 362.520841] [<ffffffff810ff0e1>] ? lru_cache_add_lru+0x21/0x40 21:42:04 ...: [ 362.520848] [<ffffffff8111109c>] ? do_anonymous_page+0x11c/0x330 21:42:04 ...: [ 362.520855] [<ffffffff81115d5f>] ? handle_mm_fault+0x31f/0x3c0 21:42:04 ...: [ 362.520862] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:42:04 ...: [ 362.520868] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:42:04 ...: [ 362.520874] [<ffffffff811418b0>] sys_open+0x20/0x30 21:42:04 ...: [ 362.520882] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520065] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520077] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:44:04 ...: [ 482.520087] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520096] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:44:04 ...: [ 482.520104] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:44:04 ...: [ 482.520112] Call Trace: 21:44:04 ...: [ 482.520139] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:44:04 ...: [ 482.520154] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:44:04 ...: [ 482.520165] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:44:04 ...: [ 482.520175] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:44:04 ...: [ 482.520185] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520194] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:44:04 ...: [ 482.520201] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:44:04 ...: [ 482.520212] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:44:04 ...: [ 482.520221] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:44:04 ...: [ 482.520229] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:44:04 ...: [ 482.520237] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:44:04 ...: [ 482.520244] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:44:04 ...: [ 482.520252] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:44:04 ...: [ 482.520258] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:44:04 ...: [ 482.520266] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:44:04 ...: [ 482.520273] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:44:04 ...: [ 482.520280] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:44:04 ...: [ 482.520286] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:44:04 ...: [ 482.520293] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:44:04 ...: [ 482.520299] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:44:04 ...: [ 482.520306] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:44:04 ...: [ 482.520313] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:44:04 ...: [ 482.520319] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:44:04 ...: [ 482.520327] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:44:04 ...: [ 482.520334] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:44:04 ...: [ 482.520341] [<ffffffff811a7938>] check_partition+0x138/0x190 21:44:04 ...: [ 482.520348] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:44:04 ...: [ 482.520355] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:44:04 ...: [ 482.520361] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:44:04 ...: [ 482.520367] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:44:04 ...: [ 482.520373] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:44:04 ...: [ 482.520380] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:44:04 ...: [ 482.520388] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:44:04 ...: [ 482.520396] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:44:04 ...: [ 482.520403] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:44:04 ...: [ 482.520410] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:44:04 ...: [ 482.520417] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:44:04 ...: [ 482.520426] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:44:04 ...: [ 482.520432] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:44:04 ...: [ 482.520438] [<ffffffff811418b0>] sys_open+0x20/0x30 21:44:04 ...: [ 482.520447] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520458] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520462] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520467] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:44:04 ...: [ 482.520475] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520483] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:44:04 ...: [ 482.520490] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:44:04 ...: [ 482.520498] Call Trace: 21:44:04 ...: [ 482.520508] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:44:04 ...: [ 482.520515] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:44:04 ...: [ 482.520521] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:44:04 ...: [ 482.520527] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:44:04 ...: [ 482.520533] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:44:04 ...: [ 482.520541] [<ffffffff81145375>] __fput+0xf5/0x210 21:44:04 ...: [ 482.520547] [<ffffffff811454b5>] fput+0x25/0x30 21:44:04 ...: [ 482.520554] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:44:04 ...: [ 482.520560] [<ffffffff81141697>] sys_close+0xb7/0x120 21:44:04 ...: [ 482.520568] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520574] INFO: task md0_reshape:2287 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520578] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520582] md0_reshape D ffff88003aee96f0 0 2287 2 0x00000000 21:44:04 ...: [ 482.520590] ffff88003cf05a70 0000000000000046 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520597] ffff88003aee9aa8 ffff88003cf05fd8 0000000000015bc0 ffff88003aee96f0 21:44:04 ...: [ 482.520605] 0000000000015bc0 ffff88003cf05fd8 0000000000015bc0 ffff88003aee9aa8 21:44:04 ...: [ 482.520612] Call Trace: 21:44:04 ...: [ 482.520623] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:44:04 ...: [ 482.520633] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:44:04 ...: [ 482.520643] [<ffffffffa0226f80>] reshape_request+0x4c0/0x9a0 [raid456] 21:44:04 ...: [ 482.520651] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520661] [<ffffffffa022777a>] sync_request+0x31a/0x3a0 [raid456] 21:44:04 ...: [ 482.520668] [<ffffffff81052713>] ? __wake_up+0x53/0x70 21:44:04 ...: [ 482.520675] [<ffffffff814156b1>] md_do_sync+0x621/0xbb0 21:44:04 ...: [ 482.520685] [<ffffffff810387b9>] ? default_spin_lock_flags+0x9/0x10 21:44:04 ...: [ 482.520692] [<ffffffff8141640c>] md_thread+0x5c/0x130 21:44:04 ...: [ 482.520699] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520705] [<ffffffff814163b0>] ? md_thread+0x0/0x130 21:44:04 ...: [ 482.520711] [<ffffffff81084416>] kthread+0x96/0xa0 21:44:04 ...: [ 482.520718] [<ffffffff810131ea>] child_rip+0xa/0x20 21:44:04 ...: [ 482.520725] [<ffffffff81084380>] ? kthread+0x0/0xa0 21:44:04 ...: [ 482.520730] [<ffffffff810131e0>] ? child_rip+0x0/0x20 21:44:04 ...: [ 482.520735] INFO: task mdadm:2288 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520739] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520743] mdadm D 0000000000000000 0 2288 1 0x00000000 21:44:04 ...: [ 482.520751] ffff88002cca9c18 0000000000000086 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520759] ffff88003aee83b8 ffff88002cca9fd8 0000000000015bc0 ffff88003aee8000 21:44:04 ...: [ 482.520767] 0000000000015bc0 ffff88002cca9fd8 0000000000015bc0 ffff88003aee83b8 21:44:04 ...: [ 482.520774] Call Trace: 21:44:04 ...: [ 482.520782] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:44:04 ...: [ 482.520790] [<ffffffff812a6d50>] ? exact_match+0x0/0x10 21:44:04 ...: [ 482.520797] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:44:04 ...: [ 482.520804] [<ffffffff811742c8>] __blkdev_get+0x68/0x3d0 21:44:04 ...: [ 482.520810] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:44:04 ...: [ 482.520816] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:44:04 ...: [ 482.520822] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:44:04 ...: [ 482.520829] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:44:04 ...: [ 482.520837] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:44:04 ...: [ 482.520843] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:44:04 ...: [ 482.520850] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:44:04 ...: [ 482.520857] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:44:04 ...: [ 482.520864] [<ffffffff810ff0e1>] ? lru_cache_add_lru+0x21/0x40 21:44:04 ...: [ 482.520871] [<ffffffff8111109c>] ? do_anonymous_page+0x11c/0x330 21:44:04 ...: [ 482.520878] [<ffffffff81115d5f>] ? handle_mm_fault+0x31f/0x3c0 21:44:04 ...: [ 482.520885] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:44:04 ...: [ 482.520891] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:44:04 ...: [ 482.520897] [<ffffffff811418b0>] sys_open+0x20/0x30 21:44:04 ...: [ 482.520905] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:46:04 ...: [ 602.520053] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:46:04 ...: [ 602.520059] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:46:04 ...: [ 602.520065] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:46:04 ...: [ 602.520075] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:46:04 ...: [ 602.520084] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:46:04 ...: [ 602.520091] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:46:04 ...: [ 602.520099] Call Trace: 21:46:04 ...: [ 602.520127] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:46:04 ...: [ 602.520142] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:46:04 ...: [ 602.520153] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:46:04 ...: [ 602.520162] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:46:04 ...: [ 602.520171] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:46:04 ...: [ 602.520180] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:46:04 ...: [ 602.520187] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:46:04 ...: [ 602.520197] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:46:04 ...: [ 602.520206] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:46:04 ...: [ 602.520215] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:46:04 ...: [ 602.520222] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:46:04 ...: [ 602.520229] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:46:04 ...: [ 602.520237] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:46:04 ...: [ 602.520244] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:46:04 ...: [ 602.520252] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:46:04 ...: [ 602.520259] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:46:04 ...: [ 602.520266] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:46:04 ...: [ 602.520273] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:46:04 ...: [ 602.520279] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:46:04 ...: [ 602.520285] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:46:04 ...: [ 602.520292] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:46:04 ...: [ 602.520300] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:46:04 ...: [ 602.520306] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:46:04 ...: [ 602.520314] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:46:04 ...: [ 602.520321] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:46:04 ...: [ 602.520328] [<ffffffff811a7938>] check_partition+0x138/0x190 21:46:04 ...: [ 602.520335] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:46:04 ...: [ 602.520342] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:46:04 ...: [ 602.520348] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:46:04 ...: [ 602.520354] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:46:04 ...: [ 602.520359] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:46:04 ...: [ 602.520367] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:46:04 ...: [ 602.520375] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:46:04 ...: [ 602.520383] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:46:04 ...: [ 602.520390] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:46:04 ...: [ 602.520397] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:46:04 ...: [ 602.520404] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:46:04 ...: [ 602.520413] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:46:04 ...: [ 602.520419] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:46:04 ...: [ 602.520425] [<ffffffff811418b0>] sys_open+0x20/0x30 21:46:04 ...: [ 602.520434] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:46:04 ...: [ 602.520443] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:46:04 ...: [ 602.520447] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:46:04 ...: [ 602.520451] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:46:04 ...: [ 602.520460] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:46:04 ...: [ 602.520468] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:46:04 ...: [ 602.520475] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:46:04 ...: [ 602.520483] Call Trace: 21:46:04 ...: [ 602.520492] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:46:04 ...: [ 602.520500] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:46:04 ...: [ 602.520506] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:46:04 ...: [ 602.520512] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:46:04 ...: [ 602.520518] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:46:04 ...: [ 602.520526] [<ffffffff81145375>] __fput+0xf5/0x210 21:46:04 ...: [ 602.520533] [<ffffffff811454b5>] fput+0x25/0x30 21:46:04 ...: [ 602.520539] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:46:04 ...: [ 602.520545] [<ffffffff81141697>] sys_close+0xb7/0x120 21:46:04 ...: [ 602.520552] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b

Read the article

Localhost not working after installing PHP on Mountain Lion

- by zen

I've installed php using brew install php54 --with-mysql, I've set up all the path correctly. which php will give me /usr/local/bin/php php -v will give me PHP 5.4.8 (cli) (built: Nov 20 2012 09:29:31) php --ini will give me: Configuration File (php.ini) Path: /usr/local/etc/php/5.4 Loaded Configuration File: /usr/local/etc/php/5.4/php.ini Scan for additional .ini files in: /usr/local/etc/php/5.4/conf.d Additional .ini files parsed: (none) apachectl -V | grep httpd.conf will give me -D SERVER_CONFIG_FILE="/private/etc/apache2/httpd.conf" I believe everything is correct, but after I restarted my apache I keep getting error Service Temporarily Unavailable The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later. This is my httpd.conf file: # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "log/foo_log" # with ServerRoot set to "/usr" will be interpreted by the # server as "/usr/log/foo_log". # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "/usr" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 127.0.0.1:80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module libexec/apache2/mod_authn_file.so LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so LoadModule authn_default_module libexec/apache2/mod_authn_default.so LoadModule authz_host_module libexec/apache2/mod_authz_host.so LoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.so LoadModule authz_user_module libexec/apache2/mod_authz_user.so LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so LoadModule authz_default_module libexec/apache2/mod_authz_default.so LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so LoadModule cache_module libexec/apache2/mod_cache.so LoadModule disk_cache_module libexec/apache2/mod_disk_cache.so LoadModule mem_cache_module libexec/apache2/mod_mem_cache.so LoadModule dbd_module libexec/apache2/mod_dbd.so LoadModule dumpio_module libexec/apache2/mod_dumpio.so LoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so LoadModule include_module libexec/apache2/mod_include.so LoadModule filter_module libexec/apache2/mod_filter.so LoadModule substitute_module libexec/apache2/mod_substitute.so LoadModule deflate_module libexec/apache2/mod_deflate.so LoadModule log_config_module libexec/apache2/mod_log_config.so LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so LoadModule logio_module libexec/apache2/mod_logio.so LoadModule env_module libexec/apache2/mod_env.so LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so LoadModule cern_meta_module libexec/apache2/mod_cern_meta.so LoadModule expires_module libexec/apache2/mod_expires.so LoadModule headers_module libexec/apache2/mod_headers.so LoadModule ident_module libexec/apache2/mod_ident.so LoadModule usertrack_module libexec/apache2/mod_usertrack.so #LoadModule unique_id_module libexec/apache2/mod_unique_id.so LoadModule setenvif_module libexec/apache2/mod_setenvif.so LoadModule version_module libexec/apache2/mod_version.so LoadModule proxy_module libexec/apache2/mod_proxy.so LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so LoadModule ssl_module libexec/apache2/mod_ssl.so LoadModule mime_module libexec/apache2/mod_mime.so LoadModule dav_module libexec/apache2/mod_dav.so LoadModule status_module libexec/apache2/mod_status.so LoadModule autoindex_module libexec/apache2/mod_autoindex.so LoadModule asis_module libexec/apache2/mod_asis.so LoadModule info_module libexec/apache2/mod_info.so LoadModule cgi_module libexec/apache2/mod_cgi.so LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so LoadModule negotiation_module libexec/apache2/mod_negotiation.so LoadModule dir_module libexec/apache2/mod_dir.so LoadModule imagemap_module libexec/apache2/mod_imagemap.so LoadModule actions_module libexec/apache2/mod_actions.so LoadModule speling_module libexec/apache2/mod_speling.so LoadModule userdir_module libexec/apache2/mod_userdir.so LoadModule alias_module libexec/apache2/mod_alias.so LoadModule rewrite_module libexec/apache2/mod_rewrite.so #LoadModule perl_module libexec/apache2/mod_perl.so LoadModule php5_module local/Cellar/php54/5.4.8/libexec/apache2/libphp5.so #LoadModule hfs_apple_module libexec/apache2/mod_hfs_apple.so <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User _www Group _www </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin [email protected] # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName www.example.com:80 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/Library/WebServer/Documents" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/Library/WebServer/Documents"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks MultiViews # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.([Hh][Tt]|[Dd][Ss]_[Ss])"> Order allow,deny Deny from all Satisfy All </FilesMatch> # # Apple specific filesystem protection. # <Files "rsrc"> Order allow,deny Deny from all Satisfy All </Files> <DirectoryMatch ".*\.\.namedfork"> Order allow,deny Deny from all Satisfy All </DirectoryMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "/private/var/log/apache2/error_log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "/private/var/log/apache2/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "/private/var/log/apache2/access_log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock /private/var/run/cgisock </IfModule> # # "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/Library/WebServer/CGI-Executables"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig /private/etc/apache2/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile /private/etc/apache2/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or one of the special # values 'default', 'none' or 'unlimited'. # Default setting is to accept 200 Ranges. #MaxRanges unlimited # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # 6894961 TraceEnable off # Supplemental configuration # # The configuration files in the /private/etc/apache2/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) Include /private/etc/apache2/extra/httpd-mpm.conf # Multi-language error messages #Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf # Fancy directory listings Include /private/etc/apache2/extra/httpd-autoindex.conf # Language settings Include /private/etc/apache2/extra/httpd-languages.conf # User home directories Include /private/etc/apache2/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include /private/etc/apache2/extra/httpd-info.conf # Virtual hosts #Include /private/etc/apache2/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual Include /private/etc/apache2/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include /private/etc/apache2/extra/httpd-dav.conf # Various default settings #Include /private/etc/apache2/extra/httpd-default.conf # Secure (SSL/TLS) connections #Include /private/etc/apache2/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> Include /private/etc/apache2/other/*.conf Please help me, I've spent 2 days trying to make it work. Btw error log keep saying [Tue Nov 20 10:47:40 2012] [error] proxy: HTTP: disabled connection for (localhost) and [Tue Nov 20 11:59:32 2012] [error] (61)Connection refused: proxy: HTTP: attempt to connect to [fe80::1]:20559 (localhost) failed

Read the article

htaccess rewriterule works in one virtualhost, but not a second virtualhost

- by Casey Flynn

I have two virtualhosts configured with xampp on mac os x snow lion. Both use the following .htaccess file. <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / # Protect hidden files from being viewed <Files .*> Order Deny,Allow Deny From All </Files> #Removes access to the system folder by users. #Additionally this will allow you to create a System.php controller, #previously this would not have been possible. #'system' can be replaced if you have renamed your system folder. RewriteCond %{REQUEST_URI} ^system.* RewriteRule ^(.*)$ /index.php?/$1 [L] #When your application folder isn't in the system folder #This snippet prevents user access to the application folder #Submitted by: Fabdrol #Rename 'application' to your applications folder name. RewriteCond %{REQUEST_URI} ^application.* RewriteRule ^(.*)$ /index.php?/$1 [L] #Checks to see if the user is attempting to access a valid file, #such as an image or css document, if this isn't true it sends the #request to index.php RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php/$01 [L] # If we don't have mod_rewrite installed, all 404's # can be sent to index.php, and everything works as normal. # Submitted by: ElliotHaughin ErrorDocument 404 /index.php My goal is to eliminate /index.php/ from my url strings. This htaccess works perfectly for one project, but not for the other (project/vhost) This is my vhosts.conf # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "/Applications/xampp/xamppfiles" will be interpreted by the # server as "/Applications/xampp/xamppfiles/logs/foo.log". # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "/Applications/XAMPP/xamppfiles" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbd_module modules/mod_authn_dbd.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule cache_module modules/mod_cache.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule dbd_module modules/mod_dbd.so LoadModule bucketeer_module modules/mod_bucketeer.so LoadModule dumpio_module modules/mod_dumpio.so LoadModule echo_module modules/mod_echo.so LoadModule case_filter_module modules/mod_case_filter.so LoadModule case_filter_in_module modules/mod_case_filter_in.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule include_module modules/mod_include.so LoadModule filter_module modules/mod_filter.so LoadModule charset_lite_module modules/mod_charset_lite.so LoadModule deflate_module modules/mod_deflate.so LoadModule ldap_module modules/mod_ldap.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule expires_module modules/mod_expires.so LoadModule headers_module modules/mod_headers.so LoadModule ident_module modules/mod_ident.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule unique_id_module modules/mod_unique_id.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule asis_module modules/mod_asis.so LoadModule info_module modules/mod_info.so LoadModule suexec_module modules/mod_suexec.so LoadModule cgi_module modules/mod_cgi.so LoadModule cgid_module modules/mod_cgid.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule imagemap_module modules/mod_imagemap.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so #LoadModule apreq_module modules/mod_apreq2.so LoadModule ssl_module modules/mod_ssl.so <IfDefine JUSTTOMAKEAPXSHAPPY> LoadModule php4_module modules/libphp4.so LoadModule php5_module modules/libphp5.so </IfDefine> <IfModule !mpm_winnt_module> <IfModule !mpm_netware_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User nobody Group nogroup </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin [email protected] # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName www.example.com:80 # XAMPP ServerName localhost # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/Users/caseyflynn/Documents/workspace/vibecompass" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None #XAMPP #Order deny,allow #Deny from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/Users/caseyflynn/Documents/workspace/vibecompass"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks ExecCGI Includes # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride All # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html index.php index.htmls index.htm </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht"> Order allow,deny Deny from all </FilesMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog logs/error_log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog logs/access_log common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog logs/access_log combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/Applications/XAMPP/xamppfiles/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "/Applications/xampp/xamppfiles/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/Applications/XAMPP/xamppfiles/phpmyadmin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig etc/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi AddHandler cgi-script .cgi .pl # For files that include their own HTTP headers: #AddHandler send-as-is asis # For server-parsed imagemap files: #AddHandler imap-file map # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # AddType text/html .shtml AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile etc/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # EnableMMAP off EnableSendfile off # Supplemental configuration # # The configuration files in the /Applications/xampp/etc/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include /Applications/XAMPP/etc/extra/httpd-mpm.conf # Multi-language error messages Include /Applications/XAMPP/etc/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include /Applications/XAMPP/etc/extra/httpd-autoindex.conf # Language settings #Include /Applications/XAMPP/etc/extra/httpd-languages.conf # User home directories Include /Applications/XAMPP/etc/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include /Applications/XAMPP/etc/extra/httpd-info.conf # Virtual hosts Include /Applications/XAMPP/etc/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include /Applications/XAMPP/etc/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include /Applications/XAMPP/etc/extra/httpd-dav.conf # Various default settings #Include /Applications/XAMPP/etc/extra/httpd-default.conf # Secure (SSL/TLS) connections Include /Applications/XAMPP/etc/extra/httpd-ssl.conf <IfModule ssl_module> <IfDefine SSL> Include etc/extra/httpd-ssl.conf </IfDefine> </IfModule> # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> #XAMPP Include etc/extra/httpd-xampp.conf Any idea what might be the root of this? ANSWER: had to add this to my httpd.conf file <Directory /Users/caseyflynn/Documents/workspace/cobar> Options FollowSymLinks AllowOverride all #XAMPP Order deny,allow Allow from all </Directory>

Read the article

video and file caching with squid lusca?

- by moon

hello all i have configured squid lusca on ubuntu 11.04 version and also configured the video caching but the problem is the squid cannot configure the video more than 2 min long and the file of size upto 5.xx mbs only. here is my config please guide me how can i cache the long videos and files with squid: > # PORT and Transparent Option http_port 8080 transparent server_http11 on icp_port 0 > > # Cache Directory , modify it according to your system. > # but first create directory in root by mkdir /cache1 > # and then issue this command chown proxy:proxy /cache1 > # [for ubuntu user is proxy, in Fedora user is SQUID] > # I have set 500 MB for caching reserved just for caching , > # adjust it according to your need. > # My recommendation is to have one cache_dir per drive. zzz > > #store_dir_select_algorithm round-robin cache_dir aufs /cache1 500 16 256 cache_replacement_policy heap LFUDA memory_replacement_policy heap > LFUDA > > # If you want to enable DATE time n SQUID Logs,use following emulate_httpd_log on logformat squid %tl %6tr %>a %Ss/%03Hs %<st %rm > %ru %un %Sh/%<A %mt log_fqdn off > > # How much days to keep users access web logs > # You need to rotate your log files with a cron job. For example: > # 0 0 * * * /usr/local/squid/bin/squid -k rotate logfile_rotate 14 debug_options ALL,1 cache_access_log /var/log/squid/access.log > cache_log /var/log/squid/cache.log cache_store_log > /var/log/squid/store.log > > #I used DNSAMSQ service for fast dns resolving > #so install by using "apt-get install dnsmasq" first dns_nameservers 127.0.0.1 101.11.11.5 ftp_user anonymous@ ftp_list_width 32 ftp_passive on ftp_sanitycheck on > > #ACL Section acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl > to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 563 # https, snews > acl SSL_ports port 873 # rsync acl Safe_ports port 80 # http acl > Safe_ports port 21 # ftp acl Safe_ports port 443 563 # https, snews > acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl > Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port > 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port > 591 # filemaker acl Safe_ports port 777 # multiling http acl > Safe_ports port 631 # cups acl Safe_ports port 873 # rsync acl > Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method > CONNECT http_access allow manager localhost http_access deny manager > http_access allow purge localhost http_access deny purge http_access > deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow > localhost http_access allow all http_reply_access allow all icp_access > allow all > > #========================== > # Administrative Parameters > #========================== > > # I used UBUNTU so user is proxy, in FEDORA you may use use squid cache_effective_user proxy cache_effective_group proxy cache_mgr > [email protected] visible_hostname proxy.aacable.net unique_hostname > [email protected] > > #============= > # ACCELERATOR > #============= half_closed_clients off quick_abort_min 0 KB quick_abort_max 0 KB vary_ignore_expire on reload_into_ims on log_fqdn > off memory_pools off > > # If you want to hide your proxy machine from being detected at various site use following via off > > #============================================ > # OPTIONS WHICH AFFECT THE CACHE SIZE / zaib > #============================================ > # If you have 4GB memory in Squid box, we will use formula of 1/3 > # You can adjust it according to your need. IF squid is taking too much of RAM > # Then decrease it to 128 MB or even less. > > cache_mem 256 MB minimum_object_size 512 bytes maximum_object_size 500 > MB maximum_object_size_in_memory 128 KB > > #============================================================$ > # SNMP , if you want to generate graphs for SQUID via MRTG > #============================================================$ > #acl snmppublic snmp_community gl > #snmp_port 3401 > #snmp_access allow snmppublic all > #snmp_access allow all > > #============================================================ > # ZPH , To enable cache content to be delivered at full lan speed, > # To bypass the queue at MT. > #============================================================ tcp_outgoing_tos 0x30 all zph_mode tos zph_local 0x30 zph_parent 0 > zph_option 136 > > # Caching Youtube acl videocache_allow_url url_regex -i \.youtube\.com\/get_video\? acl videocache_allow_url url_regex -i > \.youtube\.com\/videoplayback \.youtube\.com\/videoplay > \.youtube\.com\/get_video\? acl videocache_allow_url url_regex -i > \.youtube\.[a-z][a-z]\/videoplayback \.youtube\.[a-z][a-z]\/videoplay > \.youtube\.[a-z][a-z]\/get_video\? acl videocache_allow_url url_regex > -i \.googlevideo\.com\/videoplayback \.googlevideo\.com\/videoplay \.googlevideo\.com\/get_video\? acl videocache_allow_url url_regex -i > \.google\.com\/videoplayback \.google\.com\/videoplay > \.google\.com\/get_video\? acl videocache_allow_url url_regex -i > \.google\.[a-z][a-z]\/videoplayback \.google\.[a-z][a-z]\/videoplay > \.google\.[a-z][a-z]\/get_video\? acl videocache_allow_url url_regex > -i proxy[a-z0-9\-][a-z0-9][a-z0-9][a-z0-9]?\.dailymotion\.com\/ acl videocache_allow_url url_regex -i vid\.akm\.dailymotion\.com\/ acl > videocache_allow_url url_regex -i > [a-z0-9][0-9a-z][0-9a-z]?[0-9a-z]?[0-9a-z]?\.xtube\.com\/(.*)flv acl > videocache_allow_url url_regex -i \.vimeo\.com\/(.*)\.(flv|mp4) acl > videocache_allow_url url_regex -i > va\.wrzuta\.pl\/wa[0-9][0-9][0-9][0-9]? acl videocache_allow_url > url_regex -i \.youporn\.com\/(.*)\.flv acl videocache_allow_url > url_regex -i \.msn\.com\.edgesuite\.net\/(.*)\.flv acl > videocache_allow_url url_regex -i \.tube8\.com\/(.*)\.(flv|3gp) acl > videocache_allow_url url_regex -i \.mais\.uol\.com\.br\/(.*)\.flv acl > videocache_allow_url url_regex -i > \.blip\.tv\/(.*)\.(flv|avi|mov|mp3|m4v|mp4|wmv|rm|ram|m4v) acl > videocache_allow_url url_regex -i > \.apniisp\.com\/(.*)\.(flv|avi|mov|mp3|m4v|mp4|wmv|rm|ram|m4v) acl > videocache_allow_url url_regex -i \.break\.com\/(.*)\.(flv|mp4) acl > videocache_allow_url url_regex -i redtube\.com\/(.*)\.flv acl > videocache_allow_dom dstdomain .mccont.com .metacafe.com > .cdn.dailymotion.com acl videocache_deny_dom dstdomain > .download.youporn.com .static.blip.tv acl dontrewrite url_regex > redbot\.org \.php acl getmethod method GET > > storeurl_access deny dontrewrite storeurl_access deny !getmethod > storeurl_access deny videocache_deny_dom storeurl_access allow > videocache_allow_url storeurl_access allow videocache_allow_dom > storeurl_access deny all > > storeurl_rewrite_program /etc/squid/storeurl.pl > storeurl_rewrite_children 7 storeurl_rewrite_concurrency 10 > > acl store_rewrite_list urlpath_regex -i > \/(get_video\?|videodownload\?|videoplayback.*id) acl > store_rewrite_list urlpath_regex -i \.flv$ \.mp3$ \.mp4$ \.swf$ \ > storeurl_access allow store_rewrite_list storeurl_access deny all > > refresh_pattern -i \.flv$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.mp3$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth refresh_pattern -i \.mp4$ > 10080 80% 10080 override-expire override-lastmod reload-into-ims > ignore-reload ignore-no-cache ignore-private ignore-auth > refresh_pattern -i \.swf$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.gif$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth refresh_pattern -i \.jpg$ > 10080 80% 10080 override-expire override-lastmod reload-into-ims > ignore-reload ignore-no-cache ignore-private ignore-auth > refresh_pattern -i \.jpeg$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.exe$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth > > # 1 year = 525600 mins, 1 month = 10080 mins, 1 day = 1440 refresh_pattern (get_video\?|videoplayback\?|videodownload\?|\.flv?) > 10080 80% 10080 ignore-no-cache ignore-private override-expire > override-lastmod reload-into-ims refresh_pattern > (get_video\?|videoplayback\?id|videoplayback.*id|videodownload\?|\.flv?) > 10080 80% 10080 ignore-no-cache ignore-private override-expire > override-lastmod reload-into-ims refresh_pattern \.(ico|video-stats) > 10080 80% 10080 override-expire ignore-reload ignore-no-cache > ignore-private ignore-auth override-lastmod negative-ttl=10080 > refresh_pattern \.etology\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern galleries\.video(\?|sz) 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern brazzers\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern \.adtology\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern > ^.*(utm\.gif|ads\?|rmxads\.com|ad\.z5x\.net|bh\.contextweb\.com|bstats\.adbrite\.com|a1\.interclick\.com|ad\.trafficmp\.com|ads\.cubics\.com|ad\.xtendmedia\.com|\.googlesyndication\.com|advertising\.com|yieldmanager|game-advertising\.com|pixel\.quantserve\.com|adperium\.com|doubleclick\.net|adserving\.cpxinteractive\.com|syndication\.com|media.fastclick.net).* > 10080 20% 10080 ignore-no-cache ignore-private override-expire > ignore-reload ignore-auth negative-ttl=40320 max-stale=10 > refresh_pattern ^.*safebrowsing.*google 10080 80% 10080 > override-expire ignore-reload ignore-no-cache ignore-private > ignore-auth negative-ttl=10080 refresh_pattern > ^http://((cbk|mt|khm|mlt)[0-9]?)\.google\.co(m|\.uk) 10080 80% > 10080 override-expire ignore-reload ignore-private negative-ttl=10080 > refresh_pattern ytimg\.com.*\.jpg > 10080 80% 10080 override-expire ignore-reload refresh_pattern > images\.friendster\.com.*\.(png|gif) 10080 80% > 10080 override-expire ignore-reload refresh_pattern garena\.com > 10080 80% 10080 override-expire reload-into-ims refresh_pattern > photobucket.*\.(jp(e?g|e|2)|tiff?|bmp|gif|png) 10080 80% > 10080 override-expire ignore-reload refresh_pattern > vid\.akm\.dailymotion\.com.*\.on2\? 10080 80% > 10080 ignore-no-cache override-expire override-lastmod refresh_pattern > mediafire.com\/images.*\.(jp(e?g|e|2)|tiff?|bmp|gif|png) 10080 80% > 10080 reload-into-ims override-expire ignore-private refresh_pattern > ^http:\/\/images|pics|thumbs[0-9]\. 10080 80% > 10080 reload-into-ims ignore-no-cache ignore-reload override-expire > refresh_pattern ^http:\/\/www.onemanga.com.*\/ > 10080 80% 10080 reload-into-ims ignore-no-cache ignore-reload > override-expire refresh_pattern > ^http://v\.okezone\.com/get_video\/([a-zA-Z0-9]) 10080 80% 10080 > override-expire ignore-reload ignore-no-cache ignore-private > ignore-auth override-lastmod negative-ttl=10080 > > #images facebook refresh_pattern -i \.facebook.com.*\.(jpg|png|gif) 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern -i \.fbcdn.net.*\.(jpg|gif|png|swf|mp3) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern static\.ak\.fbcdn\.net*\.(jpg|gif|png) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern ^http:\/\/profile\.ak\.fbcdn.net*\.(jpg|gif|png) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > > #All File refresh_pattern -i \.(3gp|7z|ace|asx|bin|deb|divx|dvr-ms|ram|rpm|exe|inc|cab|qt) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(rar|jar|gz|tgz|bz2|iso|m1v|m2(v|p)|mo(d|v)|arj|lha|lzh|zip|tar) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(jp(e?g|e|2)|gif|pn[pg]|bm?|tiff?|ico|swf|dat|ad|txt|dll) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(avi|ac4|mp(e?g|a|e|1|2|3|4)|mk(a|v)|ms(i|u|p)|og(x|v|a|g)|rm|r(a|p)m|snd|vob) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(pp(t?x)|s|t)|pdf|rtf|wax|wm(a|v)|wmx|wpl|cb(r|z|t)|xl(s?x)|do(c?x)|flv|x-flv) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims > > refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern ^gopher: > 1440 0% 1440 refresh_pattern ^ftp: 10080 95% 10080 > override-lastmod reload-into-ims refresh_pattern . 1440 > 95% 10080 override-lastmod reload-into-ims

Read the article

Disable .htaccess from apache allowoverride none, still reads .htaccess files

- by John Magnolia

I have moved all of our .htaccess config into <Directory> blocks and set AllowOverride None in the default and default-ssl. Although after restarting apache it is still reading the .htaccess files. How can I completely turn off reading these files? Update of all files with "AllowOverride" /etc/apache2/mods-available/userdir.conf <IfModule mod_userdir.c> UserDir public_html UserDir disabled root <Directory /home/*/public_html> AllowOverride FileInfo AuthConfig Limit Indexes Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec <Limit GET POST OPTIONS> Order allow,deny Allow from all </Limit> <LimitExcept GET POST OPTIONS> Order deny,allow Deny from all </LimitExcept> </Directory> </IfModule> /etc/apache2/mods-available/alias.conf <IfModule alias_module> # # Aliases: Add here as many aliases as you need (with no limit). The format is # Alias fakename realname # # Note that if you include a trailing / on fakename then the server will # require it to be present in the URL. So "/icons" isn't aliased in this # example, only "/icons/". If the fakename is slash-terminated, then the # realname must also be slash terminated, and if the fakename omits the # trailing slash, the realname must also omit it. # # We include the /icons/ alias for FancyIndexed directory listings. If # you do not use FancyIndexing, you may comment this out. # Alias /icons/ "/usr/share/apache2/icons/" <Directory "/usr/share/apache2/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </Directory> </IfModule> /etc/apache2/httpd.conf # # Directives to allow use of AWStats as a CGI # Alias /awstatsclasses "/usr/share/doc/awstats/examples/wwwroot/classes/" Alias /awstatscss "/usr/share/doc/awstats/examples/wwwroot/css/" Alias /awstatsicons "/usr/share/doc/awstats/examples/wwwroot/icon/" ScriptAlias /awstats/ "/usr/share/doc/awstats/examples/wwwroot/cgi-bin/" # # This is to permit URL access to scripts/files in AWStats directory. # <Directory "/usr/share/doc/awstats/examples/wwwroot"> Options None AllowOverride None Order allow,deny Allow from all </Directory> Alias /awstats-icon/ /usr/share/awstats/icon/ <Directory /usr/share/awstats/icon> Options None AllowOverride None Order allow,deny Allow from all </Directory> /etc/apache2/sites-available/default-ssl <IfModule mod_ssl.c> <VirtualHost _default_:443> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/ssl_access.log combined # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /etc/ssl/certs/ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath /etc/apache2/ssl.crl/ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. BrowserMatch "MSIE [2-6]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 # MSIE 7 and newer should be able to use keepalive BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown </VirtualHost> </IfModule> /etc/apache2/sites-available/default <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> Alias /delboy /usr/share/phpmyadmin <Directory /usr/share/phpmyadmin> # Restrict phpmyadmin access Order Deny,Allow Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> /etc/apache2/conf.d/security # # Disable access to the entire file system except for the directories that # are explicitly allowed later. # # This currently breaks the configurations that come with some web application # Debian packages. # #<Directory /> # AllowOverride None # Order Deny,Allow # Deny from all #</Directory> # Changing the following options will not really affect the security of the # server, but might make attacks slightly more difficult in some cases. # # ServerTokens # This directive configures what you return as the Server HTTP response # Header. The default is 'Full' which sends information about the OS-Type # and compiled in modules. # Set to one of: Full | OS | Minimal | Minor | Major | Prod # where Full conveys the most information, and Prod the least. # #ServerTokens Minimal ServerTokens OS #ServerTokens Full # # Optionally add a line containing the server version and virtual host # name to server-generated pages (internal error documents, FTP directory # listings, mod_status and mod_info output etc., but not CGI generated # documents or custom error documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # #ServerSignature Off ServerSignature On # # Allow TRACE method # # Set to "extended" to also reflect the request body (only for testing and # diagnostic purposes). # # Set to one of: On | Off | extended # TraceEnable Off #TraceEnable On /etc/apache2/apache2.conf # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "foo.log" # with ServerRoot set to "/etc/apache2" will be interpreted by the # server as "/etc/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # #ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # LockFile ${APACHE_LOCK_DIR}/accept.lock # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 4 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 500 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadLimit: ThreadsPerChild can be changed to this maximum value during a # graceful restart. ThreadLimit can only be changed by stopping # and starting Apache. # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog ${APACHE_LOG_DIR}/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include mods-enabled/*.load Include mods-enabled/*.conf # Include all the user configurations: Include httpd.conf # Include ports listing Include ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include conf.d/ # Include the virtual host configurations: Include sites-enabled/

Read the article

Ubuntu and Windows 8 shared partition gets corrupted

- by Bruno-P

I have a dual boot (Ubuntu 12.04 and Windows 8) system. Both systems have access to an NTFS "DATA" partition which contains all my images, documents, music and some application data like Chrome and Thunderbird Profiles which used by both OS. Everything was working fine in my Dual boot Ubuntu/Windows 7, but after updating to Windows 8 I am having a lot of troubles. First, sometimes, I add some files from Ubuntu into my DATA partition but they don't show up in Windows. Sometimes, I can't even use the DATA partition from Windows. When I try to save a file it gives an error "The directory or file is corrupted or unreadable". I need to run checkdisk to fix it but after some time, same error appears. Before upgrading to Windows 8 I also installed a new hard drive and copied the old data using clonezilla (full disk clone). Here is the log of my last chkdisk: Chkdsk was executed in read/write mode. Checking file system on D: Volume dismounted. All opened handles to this volume are now invalid. Volume label is DATA. CHKDSK is verifying files (stage 1 of 3)... Deleted corrupt attribute list entry with type code 128 in file 67963. Unable to find child frs 0x12a3f with sequence number 0x15. The attribute of type 0x80 and instance tag 0x2 in file 0x1097b has allocated length of 0x560000 instead of 0x427000. Deleted corrupt attribute list entry with type code 128 in file 67963. Unable to locate attribute with instance tag 0x2 and segment reference 0x1e00000001097b. The expected attribute type is 0x80. Deleting corrupt attribute record (128, "") from file record segment 67963. Attribute record of type 0x80 and instance tag 0x3 is cross linked starting at 0x2431b2 for possibly 0x20 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x3 in file 0x1791e is already in use. Deleting corrupt attribute record (128, "") from file record segment 96542. Attribute record of type 0x80 and instance tag 0x4 is cross linked starting at 0x6bc7 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x4 in file 0x17e83 is already in use. Deleting corrupt attribute record (128, "") from file record segment 97923. Attribute record of type 0x80 and instance tag 0x4 is cross linked starting at 0x1f7cec for possibly 0x5 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x4 in file 0x17eaf is already in use. Deleting corrupt attribute record (128, "") from file record segment 97967. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x441bd7f for possibly 0x9 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x32085 is already in use. Deleting corrupt attribute record (128, "") from file record segment 204933. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4457850 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x320be is already in use. Deleting corrupt attribute record (128, "") from file record segment 204990. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4859249 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3726b is already in use. Deleting corrupt attribute record (128, "") from file record segment 225899. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x485d309 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3726c is already in use. Deleting corrupt attribute record (128, "") from file record segment 225900. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x48a47de for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37286 is already in use. Deleting corrupt attribute record (128, "") from file record segment 225926. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x48ac80b for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37287 is already in use. Deleting corrupt attribute record (128, "") from file record segment 225927. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x48ae7ef for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37288 is already in use. Deleting corrupt attribute record (128, "") from file record segment 225928. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x48af7f8 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3728a is already in use. Deleting corrupt attribute record (128, "") from file record segment 225930. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x48c39b6 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37292 is already in use. Deleting corrupt attribute record (128, "") from file record segment 225938. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x495d37a for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x372d7 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226007. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4d0bd38 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x372dc is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226012. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4c2d9bc for possibly 0x1 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x372ed is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226029. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4a4c1c3 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37354 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226132. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4a8e639 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37376 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226166. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4a8f6eb for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37379 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226169. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4ae1aa8 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37391 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226193. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4b00d45 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x37396 is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226198. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4b02d50 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3739c is already in use. Deleting corrupt attribute record (128, "") from file record segment 226204. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4b3407a for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x373a8 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226216. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4bd8a1b for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x373db is already in use. Deleting corrupt attribute record (128, "") from file record segment 226267. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4bd9a28 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x373dd is already in use. Deleting corrupt attribute record (128, "") from file record segment 226269. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4c2fb24 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x373f3 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226291. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cb67e9 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37424 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226340. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cba829 for possibly 0x2 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37425 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226341. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cbe868 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37427 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226343. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cbf878 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37428 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226344. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cc58d8 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3742a is already in use. Deleting corrupt attribute record (128, "") from file record segment 226346. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4ccc943 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3742b is already in use. Deleting corrupt attribute record (128, "") from file record segment 226347. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cd199b for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3742d is already in use. Deleting corrupt attribute record (128, "") from file record segment 226349. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cd29a8 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3742f is already in use. Deleting corrupt attribute record (128, "") from file record segment 226351. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cd39b8 for possibly 0x2 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37430 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226352. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cd49c8 for possibly 0x2 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37432 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226354. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cd9a16 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37435 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226357. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cdca46 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37436 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226358. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4ce0a78 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37437 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226359. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4ce6ad9 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3743a is already in use. Deleting corrupt attribute record (128, "") from file record segment 226362. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cebb28 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3743b is already in use. Deleting corrupt attribute record (128, "") from file record segment 226363. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4ceeb67 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3743d is already in use. Deleting corrupt attribute record (128, "") from file record segment 226365. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cf4bc6 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3743e is already in use. Deleting corrupt attribute record (128, "") from file record segment 226366. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cfbc3a for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37440 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226368. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cfcc48 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37442 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226370. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4d02ca9 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37443 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226371. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4d06ce8 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37444 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226372. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4d9a608 for possibly 0x2 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x37449 is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226377. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4d844ab for possibly 0x1 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x3744b is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226379. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4d6c32b for possibly 0x1 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x3744c is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226380. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4d2af25 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x3744e is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226382. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4d0fd78 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37451 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226385. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4d16ef8 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x8 Can anyone help? Thank you

Read the article

.htaccess not working (mod_rewrite)

- by Mike Curry

Edit: I am pretty sure my .htaccess file is NOT being executed, and the problem is NOT with my rewrite rules. I have not having any luck getting my .htaccess with mod_rewrite working. Basically all I am trying to do is remove 'www' from "http://www.site.com" and "https://www.site.com". If there is anything I am missing (conf files, etc let me know I willl update this) I jsut can't see whats wrong here... I am using a 1&1 VPS III Virtual private server... anyone ever have this issue? I am using Ubuntu 8.04 Server LTS. Here is my .htaccess file (located @ /var/www/site/trunk/html/) Options +FollowSymLinks RewriteEngine on RewriteCond %{HTTP_HOST} ^www\.(.*) [NC] RewriteRule (.*) //%1/$1 [L,R=301] My mod_rewrite is enabled: The auto regenerated sym link is there in mods-available and /usr/lib/apache2/modules/ contains mod_rewrite.so root@s15348441:/etc/apache2/mods-available# more rewrite.load LoadModule rewrite_module /usr/lib/apache2/modules/mod_rewrite.so root@s15348441:/var/log# apache2ctl -t -D DUMP_MODULES Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgi_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) rewrite_module (shared) setenvif_module (shared) ssl_module (shared) status_module (shared) Syntax OK My apache config files: apache2.conf # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # ServerTokens # This directive configures what you return as the Server HTTP response # Header. The default is 'Full' which sends information about the OS-Type # and compiled in modules. # Set to one of: Full | OS | Minor | Minimal | Major | Prod # where Full conveys the most information, and Prod the least. # ServerTokens Full # # Optionally add a line containing the server version and virtual host # name to server-generated pages (internal error documents, FTP directory # listings, mod_status and mod_info output etc., but not CGI generated # documents or custom error documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # Putting this all together, we can internationalize error responses. # # We use Alias to redirect any /error/HTTP_<error>.html.var response to # our collection of by-error message multi-language collections. We use # includes to substitute the appropriate text. # # You can modify the messages' appearance without changing any of the # default HTTP_<error>.html.var files by adding the line: # # Alias /error/include/ "/your/include/path/" # # which allows you to create your own set of files by starting with the # /usr/share/apache2/error/include/ files and copying them to /your/include/path/, # even on a per-VirtualHost basis. The default include files will display # your Apache version number and your ServerAdmin email address regardless # of the setting of ServerSignature. # # The internationalized error documents require mod_alias, mod_include # and mod_negotiation. To activate them, uncomment the following 30 lines. # Alias /error/ "/usr/share/apache2/error/" # # <Directory "/usr/share/apache2/error"> # AllowOverride None # Options IncludesNoExec # AddOutputFilter Includes html # AddHandler type-map var # Order allow,deny # Allow from all # LanguagePriority en cs de es fr it nl sv pt-br ro # ForceLanguagePriority Prefer Fallback # </Directory> # # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var # ErrorDocument 410 /error/HTTP_GONE.html.var # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ My default config file for www on apache NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] #SSLEnable #SSLVerifyClient none #SSLCertificateFile /usr/local/ssl/crt/public.crt #SSLCertificateKeyFile /usr/local/ssl/private/private.key DocumentRoot /var/www/site/trunk/html <Directory /> Options FollowSymLinks AllowOverride all </Directory> <Directory /var/www/site/trunk/html> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My ssl config file NameVirtualHost *:443 <VirtualHost *:443> ServerAdmin [email protected] #SSLEnable #SSLVerifyClient none #SSLCertificateFile /usr/local/ssl/crt/public.crt #SSLCertificateKeyFile /usr/local/ssl/private/private.key DocumentRoot /var/www/site/trunk/html <Directory /> Options FollowSymLinks AllowOverride all </Directory> <Directory /var/www/site/trunk/html> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn SSLEngine On SSLCertificateFile /usr/local/ssl/crt/public.crt SSLCertificateKeyFile /usr/local/ssl/private/private.key CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My /etc/apache2/httpd.conf is blank The directory /etc/apache2/conf.d has nothing in it but one file (charset) contents of /etc/apache2/conf.dcharset # Read the documentation before enabling AddDefaultCharset. # In general, it is only a good idea if you know that all your files # have this encoding. It will override any encoding given in the files # in meta http-equiv or xml encoding tags. #AddDefaultCharset UTF-8 My apache error.log [Wed Jun 03 00:12:31 2009] [error] [client 216.168.43.234] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Jun 03 05:03:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:03:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:48 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:57 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:17:28 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:26:23 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 05:26:34 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 06:03:41 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 06:03:51 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 06:25:07 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 06:25:17 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 12:09:25 2009] [error] [client 61.139.105.163] File does not exist: /var/www/site/trunk/html/fastenv [Wed Jun 03 15:04:42 2009] [notice] Graceful restart requested, doing restart [Wed Jun 03 15:04:43 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 15:29:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:29:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:30:32 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:45:54 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 15:46:05 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations

Read the article

Why can I query with an int but not a string here? PHP MySQL Datatypes

- by CT

I am working on an Asset Database problem. I receive $id from $_GET["id"]; I then query the database and display the results. This works if my id is an integer like "93650" but if it has other characters like "wci1001", it displays this MySQL error: Unknown column 'text' in 'where clause' All fields in tables are of type: VARCHAR(50) What would I need to do to be able to use this query to search by id that includes other characters? Thank you. <?php <?php /* * ASSET DB FUNCTIONS SCRIPT * */ # connect to database function ConnectDB(){ mysql_connect("localhost", "asset_db", "asset_db") or die(mysql_error()); mysql_select_db("asset_db") or die(mysql_error()); } # find asset type returns $type function GetAssetType($id){ $sql = "SELECT asset.type From asset WHERE asset.id = $id"; $result = mysql_query($sql) or die(mysql_error()); $row = mysql_fetch_assoc($result); $type = $row['type']; return $type; } # query server returns $result (sql query array) function QueryServer($id){ $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchaseDate ,asset.purchaseOrder ,asset.value ,asset.type ,asset.notes ,server.manufacturer ,server.model ,server.serialNumber ,server.esc ,server.warranty ,server.user ,server.prevUser ,server.cpu ,server.memory ,server.hardDrive FROM asset LEFT JOIN server ON server.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); return $result; } # get server data returns $serverArray function GetServerData($result){ while($row = mysql_fetch_assoc($result)) { $id = $row['id']; $company = $row['company']; $location = $row['location']; $purchaseDate = $row['purchaseDate']; $purchaseOrder = $row['purchaseOrder']; $value = $row['value']; $type = $row['type']; $notes = $row['notes']; $manufacturer = $row['manufacturer']; $model = $row['model']; $serialNumber = $row['serialNumber']; $esc = $row['esc']; $warranty = $row['warranty']; $user = $row['user']; $prevUser = $row['prevUser']; $cpu = $row['cpu']; $memory = $row['memory']; $hardDrive = $row['hardDrive']; $serverArray = array($id, $company, $location, $purchaseDate, $purchaseOrder, $value, $type, $notes, $manufacturer, $model, $serialNumber, $esc, $warranty, $user, $prevUser, $cpu, $memory, $hardDrive); } return $serverArray; } # print server table function PrintServerTable($serverArray){ $id = $serverArray[0]; $company = $serverArray[1]; $location = $serverArray[2]; $purchaseDate = $serverArray[3]; $purchaseOrder = $serverArray[4]; $value = $serverArray[5]; $type = $serverArray[6]; $notes = $serverArray[7]; $manufacturer = $serverArray[8]; $model = $serverArray[9]; $serialNumber = $serverArray[10]; $esc = $serverArray[11]; $warranty = $serverArray[12]; $user = $serverArray[13]; $prevUser = $serverArray[14]; $cpu = $serverArray[15]; $memory = $serverArray[16]; $hardDrive = $serverArray[17]; echo "<table width=\"100%\" border=\"0\"><tr><td style=\"vertical-align:top\"><table width=\"100%\" border=\"0\"><tr><td colspan=\"2\"><h2>General Info</h2></td></tr><tr id=\"hightlight\"><td>Asset ID:</td><td>"; echo $id; echo "</td></tr><tr><td>Company:</td><td>"; echo $company; echo "</td></tr><tr id=\"hightlight\"><td>Location:</td><td>"; echo $location; echo "</td></tr><tr><td>Purchase Date:</td><td>"; echo $purchaseDate; echo "</td></tr><tr id=\"hightlight\"><td>Purchase Order #:</td><td>"; echo $purchaseOrder; echo "</td></tr><tr><td>Value:</td><td>"; echo $value; echo "</td></tr><tr id=\"hightlight\"><td>Type:</td><td>"; echo $type; echo "</td></tr><tr><td>Notes:</td><td>"; echo $notes; echo "</td></tr></table></td><td style=\"vertical-align:top\"><table width=\"100%\" border=\"0\"><tr><td colspan=\"2\"><h2>Server Info</h2></td></tr><tr id=\"hightlight\"><td>Manufacturer:</td><td>"; echo $manufacturer; echo "</td></tr><tr><td>Model:</td><td>"; echo $model; echo "</td></tr><tr id=\"hightlight\"><td>Serial Number:</td><td>"; echo $serialNumber; echo "</td></tr><tr><td>ESC:</td><td>"; echo $esc; echo "</td></tr><tr id=\"hightlight\"><td>Warranty:</td><td>"; echo $warranty; echo "</td></tr><tr><td colspan=\"2\"> </td></tr><tr><td colspan=\"2\"><h2>User Info</h2></td></tr><tr id=\"hightlight\"><td>User:</td><td>"; echo $user; echo "</td></tr><tr><td>Previous User:</td><td>"; echo $prevUser; echo "</td></tr></table></td><td style=\"vertical-align:top\"><table width=\"100%\" border=\"0\"><tr><td colspan=\"2\"><h2>Specs</h2></td></tr><tr id=\"hightlight\"><td>CPU:</td><td>"; echo $cpu; echo "</td></tr><tr><td>Memory:</td><td>"; echo $memory; echo "</td></tr><tr id=\"hightlight\"><td>Hard Drive:</td><td>"; echo $hardDrive; echo "</td></tr><tr><td colspan=\"2\"> </td></tr><tr><td colspan=\"2\"> </td></tr><tr><td colspan=\"2\"><h2>Options</h2></td></tr><tr><td colspan=\"2\"><a href=\"#\">Edit Asset</a></td></tr><tr><td colspan=\"2\"><a href=\"#\">Delete Asset</a></td></tr></table></td></tr></table>"; } ?> __ /* * View Asset * */ # include functions script include "functions.php"; $id = $_GET["id"]; if (empty($id)):$id="000"; endif; ConnectDB(); $type = GetAssetType($id); ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="stylesheet" type="text/css" href="style.css" /> <title>Wagman IT Asset</title> </head> <body> <div id="page"> <div id="header"> <img src="images/logo.png" /> </div> </div> <div id="content"> <div id="container"> <div id="main"> <div id="menu"> <ul> <table width="100%" border="0"> <tr> <td width="15%"></td> <td width="30%%"><li><a href="index.php">Search Assets</a></li></td> <td width="30%"><li><a href="addAsset.php">Add Asset</a></li></td> <td width="25%"></td> </tr> </table> </ul> </div> <div id="text"> <ul> <li> <h1>View Asset</h1> </li> </ul> <?php if (empty($type)):echo "<ul><li><h2>Asset ID does not match any database entries.</h2></li></ul>"; else: switch ($type){ case "Server": $result = QueryServer($id); $ServerArray = GetServerData($result); PrintServerTable($ServerArray); break; case "Desktop"; break; case "Laptop"; break; } endif; ?> </div> </div> </div> <div class="clear"></div> <div id="footer" align="center"> <p> </p> </div> </div> <div id="tagline"> Wagman Construction - Bridging Generations since 1902 </div> </body> </html>

Read the article

Is there a Telecommunications Reference Architecture?

- by raul.goycoolea

@font-face { font-family: "Arial"; }@font-face { font-family: "Courier New"; }@font-face { font-family: "Wingdings"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpFirst, li.MsoListParagraphCxSpFirst, div.MsoListParagraphCxSpFirst { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpMiddle, li.MsoListParagraphCxSpMiddle, div.MsoListParagraphCxSpMiddle { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpLast, li.MsoListParagraphCxSpLast, div.MsoListParagraphCxSpLast { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; }ol { margin-bottom: 0cm; }ul { margin-bottom: 0cm; } Abstract Reference architecture provides needed architectural information that can be provided in advance to an enterprise to enable consistent architectural best practices. Enterprise Reference Architecture helps business owners to actualize their strategies, vision, objectives, and principles. It evaluates the IT systems, based on Reference Architecture goals, principles, and standards. It helps to reduce IT costs by increasing functionality, availability, scalability, etc. Telecom Reference Architecture provides customers with the flexibility to view bundled service bills online with the provision of multiple services. It provides real-time, flexible billing and charging systems, to handle complex promotions, discounts, and settlements with multiple parties. This paper attempts to describe the Reference Architecture for the Telecom Enterprises. It lays the foundation for a Telecom Reference Architecture by articulating the requirements, drivers, and pitfalls for telecom service providers. It describes generic reference architecture for telecom enterprises and moves on to explain how to achieve Enterprise Reference Architecture by using SOA. Introduction A Reference Architecture provides a methodology, set of practices, template, and standards based on a set of successful solutions implemented earlier. These solutions have been generalized and structured for the depiction of both a logical and a physical architecture, based on the harvesting of a set of patterns that describe observations in a number of successful implementations. It helps as a reference for the various architectures that an enterprise can implement to solve various problems. It can be used as the starting point or the point of comparisons for various departments/business entities of a company, or for the various companies for an enterprise. It provides multiple views for multiple stakeholders. Major artifacts of the Enterprise Reference Architecture are methodologies, standards, metadata, documents, design patterns, etc. Purpose of Reference Architecture In most cases, architects spend a lot of time researching, investigating, defining, and re-arguing architectural decisions. It is like reinventing the wheel as their peers in other organizations or even the same organization have already spent a lot of time and effort defining their own architectural practices. This prevents an organization from learning from its own experiences and applying that knowledge for increased effectiveness. Reference architecture provides missing architectural information that can be provided in advance to project team members to enable consistent architectural best practices. Enterprise Reference Architecture helps an enterprise to achieve the following at the abstract level: · Reference architecture is more of a communication channel to an enterprise · Helps the business owners to accommodate to their strategies, vision, objectives, and principles. · Evaluates the IT systems based on Reference Architecture Principles · Reduces IT spending through increasing functionality, availability, scalability, etc · A Real-time Integration Model helps to reduce the latency of the data updates Is used to define a single source of Information · Provides a clear view on how to manage information and security · Defines the policy around the data ownership, product boundaries, etc. · Helps with cost optimization across project and solution portfolios by eliminating unused or duplicate investments and assets · Has a shorter implementation time and cost Once the reference architecture is in place, the set of architectural principles, standards, reference models, and best practices ensure that the aligned investments have the greatest possible likelihood of success in both the near term and the long term (TCO). Common pitfalls for Telecom Service Providers Telecom Reference Architecture serves as the first step towards maturity for a telecom service provider. During the course of our assignments/experiences with telecom players, we have come across the following observations – Some of these indicate a lack of maturity of the telecom service provider: · In markets that are growing and not so mature, it has been observed that telcos have a significant amount of in-house or home-grown applications. In some of these markets, the growth has been so rapid that IT has been unable to cope with business demands. Telcos have shown a tendency to come up with workarounds in their IT applications so as to meet business needs. · Even for core functions like provisioning or mediation, some telcos have tried to manage with home-grown applications. · Most of the applications do not have the required scalability or maintainability to sustain growth in volumes or functionality. · Applications face interoperability issues with other applications in the operator's landscape. Integrating a new application or network element requires considerable effort on the part of the other applications. · Application boundaries are not clear, and functionality that is not in the initial scope of that application gets pushed onto it. This results in the development of the multiple, small applications without proper boundaries. · Usage of Legacy OSS/BSS systems, poor Integration across Multiple COTS Products and Internal Systems. Most of the Integrations are developed on ad-hoc basis and Point-to-Point Integration. · Redundancy of the business functions in different applications • Fragmented data across the different applications and no integrated view of the strategic data • Lot of performance Issues due to the usage of the complex integration across OSS and BSS systems However, this is where the maturity of the telecom industry as a whole can be of help. The collaborative efforts of telcos to overcome some of these problems have resulted in bodies like the TM Forum. They have come up with frameworks for business processes, data, applications, and technology for telecom service providers. These could be a good starting point for telcos to clean up their enterprise landscape. Industry Trends in Telecom Reference Architecture Telecom reference architectures are evolving rapidly because telcos are facing business and IT challenges. “The reality is that there probably is no killer application, no silver bullet that the telcos can latch onto to carry them into a 21st Century.... Instead, there are probably hundreds – perhaps thousands – of niche applications.... And the only way to find which of these works for you is to try out lots of them, ramp up the ones that work, and discontinue the ones that fail.” – Martin Creaner President & CTO TM Forum. The following trends have been observed in telecom reference architecture: · Transformation of business structures to align with customer requirements · Adoption of more Internet-like technical architectures. The Web 2.0 concept is increasingly being used. · Virtualization of the traditional operations support system (OSS) · Adoption of SOA to support development of IP-based services · Adoption of frameworks like Service Delivery Platforms (SDPs) and IP Multimedia Subsystem · (IMS) to enable seamless deployment of various services over fixed and mobile networks · Replacement of in-house, customized, and stove-piped OSS/BSS with standards-based COTS products · Compliance with industry standards and frameworks like eTOM, SID, and TAM to enable seamless integration with other standards-based products Drivers of Reference Architecture The drivers of the Reference Architecture are Reference Architecture Goals, Principles, and Enterprise Vision and Telecom Transformation. The details are depicted below diagram. @font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoCaption, li.MsoCaption, div.MsoCaption { margin: 0cm 0cm 10pt; font-size: 9pt; font-family: "Times New Roman"; color: rgb(79, 129, 189); font-weight: bold; }div.Section1 { page: Section1; } Figure 1. Drivers for Reference Architecture @font-face { font-family: "Arial"; }@font-face { font-family: "Courier New"; }@font-face { font-family: "Wingdings"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpFirst, li.MsoListParagraphCxSpFirst, div.MsoListParagraphCxSpFirst { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpMiddle, li.MsoListParagraphCxSpMiddle, div.MsoListParagraphCxSpMiddle { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpLast, li.MsoListParagraphCxSpLast, div.MsoListParagraphCxSpLast { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; }ol { margin-bottom: 0cm; }ul { margin-bottom: 0cm; } Today’s telecom reference architectures should seamlessly integrate traditional legacy-based applications and transition to next-generation network technologies (e.g., IP multimedia subsystems). This has resulted in new requirements for flexible, real-time billing and OSS/BSS systems and implications on the service provider’s organizational requirements and structure. Telecom reference architectures are today expected to: · Integrate voice, messaging, email and other VAS over fixed and mobile networks, back end systems · Be able to provision multiple services and service bundles • Deliver converged voice, video and data services · Leverage the existing Network Infrastructure · Provide real-time, flexible billing and charging systems to handle complex promotions, discounts, and settlements with multiple parties. · Support charging of advanced data services such as VoIP, On-Demand, Services (e.g. Video), IMS/SIP Services, Mobile Money, Content Services and IPTV. · Help in faster deployment of new services • Serve as an effective platform for collaboration between network IT and business organizations · Harness the potential of converging technology, networks, devices and content to develop multimedia services and solutions of ever-increasing sophistication on a single Internet Protocol (IP) · Ensure better service delivery and zero revenue leakage through real-time balance and credit management · Lower operating costs to drive profitability Enterprise Reference Architecture The Enterprise Reference Architecture (RA) fills the gap between the concepts and vocabulary defined by the reference model and the implementation. Reference architecture provides detailed architectural information in a common format such that solutions can be repeatedly designed and deployed in a consistent, high-quality, supportable fashion. This paper attempts to describe the Reference Architecture for the Telecom Application Usage and how to achieve the Enterprise Level Reference Architecture using SOA. • Telecom Reference Architecture • Enterprise SOA based Reference Architecture Telecom Reference Architecture Tele Management Forum’s New Generation Operations Systems and Software (NGOSS) is an architectural framework for organizing, integrating, and implementing telecom systems. NGOSS is a component-based framework consisting of the following elements: · The enhanced Telecom Operations Map (eTOM) is a business process framework. · The Shared Information Data (SID) model provides a comprehensive information framework that may be specialized for the needs of a particular organization. · The Telecom Application Map (TAM) is an application framework to depict the functional footprint of applications, relative to the horizontal processes within eTOM. · The Technology Neutral Architecture (TNA) is an integrated framework. TNA is an architecture that is sustainable through technology changes. NGOSS Architecture Standards are: · Centralized data · Loosely coupled distributed systems · Application components/re-use · A technology-neutral system framework with technology specific implementations · Interoperability to service provider data/processes · Allows more re-use of business components across multiple business scenarios · Workflow automation The traditional operator systems architecture consists of four layers, · Business Support System (BSS) layer, with focus toward customers and business partners. Manages order, subscriber, pricing, rating, and billing information. · Operations Support System (OSS) layer, built around product, service, and resource inventories. · Networks layer – consists of Network elements and 3rd Party Systems. · Integration Layer – to maximize application communication and overall solution flexibility. Reference architecture for telecom enterprises is depicted below. @font-face { font-family: "Arial"; }@font-face { font-family: "Courier New"; }@font-face { font-family: "Wingdings"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoCaption, li.MsoCaption, div.MsoCaption { margin: 0cm 0cm 10pt; font-size: 9pt; font-family: "Times New Roman"; color: rgb(79, 129, 189); font-weight: bold; }p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpFirst, li.MsoListParagraphCxSpFirst, div.MsoListParagraphCxSpFirst { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpMiddle, li.MsoListParagraphCxSpMiddle, div.MsoListParagraphCxSpMiddle { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpLast, li.MsoListParagraphCxSpLast, div.MsoListParagraphCxSpLast { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; }ol { margin-bottom: 0cm; }ul { margin-bottom: 0cm; } Figure 2. Telecom Reference Architecture The major building blocks of any Telecom Service Provider architecture are as follows: 1. Customer Relationship Management CRM encompasses the end-to-end lifecycle of the customer: customer initiation/acquisition, sales, ordering, and service activation, customer care and support, proactive campaigns, cross sell/up sell, and retention/loyalty. CRM also includes the collection of customer information and its application to personalize, customize, and integrate delivery of service to a customer, as well as to identify opportunities for increasing the value of the customer to the enterprise. The key functionalities related to Customer Relationship Management are · Manage the end-to-end lifecycle of a customer request for products. · Create and manage customer profiles. · Manage all interactions with customers – inquiries, requests, and responses. · Provide updates to Billing and other south bound systems on customer/account related updates such as customer/ account creation, deletion, modification, request bills, final bill, duplicate bills, credit limits through Middleware. · Work with Order Management System, Product, and Service Management components within CRM. · Manage customer preferences – Involve all the touch points and channels to the customer, including contact center, retail stores, dealers, self service, and field service, as well as via any media (phone, face to face, web, mobile device, chat, email, SMS, mail, the customer's bill, etc.). · Support single interface for customer contact details, preferences, account details, offers, customer premise equipment, bill details, bill cycle details, and customer interactions. CRM applications interact with customers through customer touch points like portals, point-of-sale terminals, interactive voice response systems, etc. The requests by customers are sent via fulfillment/provisioning to billing system for ordering processing. 2. Billing and Revenue Management Billing and Revenue Management handles the collection of appropriate usage records and production of timely and accurate bills – for providing pre-bill usage information and billing to customers; for processing their payments; and for performing payment collections. In addition, it handles customer inquiries about bills, provides billing inquiry status, and is responsible for resolving billing problems to the customer's satisfaction in a timely manner. This process grouping also supports prepayment for services. The key functionalities provided by these applications are · To ensure that enterprise revenue is billed and invoices delivered appropriately to customers. · To manage customers’ billing accounts, process their payments, perform payment collections, and monitor the status of the account balance. · To ensure the timely and effective fulfillment of all customer bill inquiries and complaints. · Collect the usage records from mediation and ensure appropriate rating and discounting of all usage and pricing. · Support revenue sharing; split charging where usage is guided to an account different from the service consumer. · Support prepaid and post-paid rating. · Send notification on approach / exceeding the usage thresholds as enforced by the subscribed offer, and / or as setup by the customer. · Support prepaid, post paid, and hybrid (where some services are prepaid and the rest of the services post paid) customers and conversion from post paid to prepaid, and vice versa. · Support different billing function requirements like charge prorating, promotion, discount, adjustment, waiver, write-off, account receivable, GL Interface, late payment fee, credit control, dunning, account or service suspension, re-activation, expiry, termination, contract violation penalty, etc. · Initiate direct debit to collect payment against an invoice outstanding. · Send notification to Middleware on different events; for example, payment receipt, pre-suspension, threshold exceed, etc. Billing systems typically get usage data from mediation systems for rating and billing. They get provisioning requests from order management systems and inquiries from CRM systems. Convergent and real-time billing systems can directly get usage details from network elements. 3. Mediation Mediation systems transform/translate the Raw or Native Usage Data Records into a general format that is acceptable to billing for their rating purposes. The following lists the high-level roles and responsibilities executed by the Mediation system in the end-to-end solution. · Collect Usage Data Records from different data sources – like network elements, routers, servers – via different protocol and interfaces. · Process Usage Data Records – Mediation will process Usage Data Records as per the source format. · Validate Usage Data Records from each source. · Segregates Usage Data Records coming from each source to multiple, based on the segregation requirement of end Application. · Aggregates Usage Data Records based on the aggregation rule if any from different sources. · Consolidates multiple Usage Data Records from each source. · Delivers formatted Usage Data Records to different end application like Billing, Interconnect, Fraud Management, etc. · Generates audit trail for incoming Usage Data Records and keeps track of all the Usage Data Records at various stages of mediation process. · Checks duplicate Usage Data Records across files for a given time window. 4. Fulfillment This area is responsible for providing customers with their requested products in a timely and correct manner. It translates the customer's business or personal need into a solution that can be delivered using the specific products in the enterprise's portfolio. This process informs the customers of the status of their purchase order, and ensures completion on time, as well as ensuring a delighted customer. These processes are responsible for accepting and issuing orders. They deal with pre-order feasibility determination, credit authorization, order issuance, order status and tracking, customer update on customer order activities, and customer notification on order completion. Order management and provisioning applications fall into this category. The key functionalities provided by these applications are · Issuing new customer orders, modifying open customer orders, or canceling open customer orders; · Verifying whether specific non-standard offerings sought by customers are feasible and supportable; · Checking the credit worthiness of customers as part of the customer order process; · Testing the completed offering to ensure it is working correctly; · Updating of the Customer Inventory Database to reflect that the specific product offering has been allocated, modified, or cancelled; · Assigning and tracking customer provisioning activities; · Managing customer provisioning jeopardy conditions; and · Reporting progress on customer orders and other processes to customer. These applications typically get orders from CRM systems. They interact with network elements and billing systems for fulfillment of orders. 5. Enterprise Management This process area includes those processes that manage enterprise-wide activities and needs, or have application within the enterprise as a whole. They encompass all business management processes that · Are necessary to support the whole of the enterprise, including processes for financial management, legal management, regulatory management, process, cost, and quality management, etc.; · Are responsible for setting corporate policies, strategies, and directions, and for providing guidelines and targets for the whole of the business, including strategy development and planning for areas, such as Enterprise Architecture, that are integral to the direction and development of the business; · Occur throughout the enterprise, including processes for project management, performance assessments, cost assessments, etc. (i) Enterprise Risk Management: Enterprise Risk Management focuses on assuring that risks and threats to the enterprise value and/or reputation are identified, and appropriate controls are in place to minimize or eliminate the identified risks. The identified risks may be physical or logical/virtual. Successful risk management ensures that the enterprise can support its mission critical operations, processes, applications, and communications in the face of serious incidents such as security threats/violations and fraud attempts. Two key areas covered in Risk Management by telecom operators are: · Revenue Assurance: Revenue assurance system will be responsible for identifying revenue loss scenarios across components/systems, and will help in rectifying the problems. The following lists the high-level roles and responsibilities executed by the Revenue Assurance system in the end-to-end solution. o Identify all usage information dropped when networks are being upgraded. o Interconnect bill verification. o Identify where services are routinely provisioned but never billed. o Identify poor sales policies that are intensifying collections problems. o Find leakage where usage is sent to error bucket and never billed for. o Find leakage where field service, CRM, and network build-out are not optimized. · Fraud Management: Involves collecting data from different systems to identify abnormalities in traffic patterns, usage patterns, and subscription patterns to report suspicious activity that might suggest fraudulent usage of resources, resulting in revenue losses to the operator. The key roles and responsibilities of the system component are as follows: o Fraud management system will capture and monitor high usage (over a certain threshold) in terms of duration, value, and number of calls for each subscriber. The threshold for each subscriber is decided by the system and fixed automatically. o Fraud management will be able to detect the unauthorized access to services for certain subscribers. These subscribers may have been provided unauthorized services by employees. The component will raise the alert to the operator the very first time of such illegal calls or calls which are not billed. o The solution will be to have an alarm management system that will deliver alarms to the operator/provider whenever it detects a fraud, thus minimizing fraud by catching it the first time it occurs. o The Fraud Management system will be capable of interfacing with switches, mediation systems, and billing systems (ii) Knowledge Management This process focuses on knowledge management, technology research within the enterprise, and the evaluation of potential technology acquisitions. Key responsibilities of knowledge base management are to · Maintain knowledge base – Creation and updating of knowledge base on ongoing basis. · Search knowledge base – Search of knowledge base on keywords or category browse · Maintain metadata – Management of metadata on knowledge base to ensure effective management and search. · Run report generator. · Provide content – Add content to the knowledge base, e.g., user guides, operational manual, etc. (iii) Document Management It focuses on maintaining a repository of all electronic documents or images of paper documents relevant to the enterprise using a system. (iv) Data Management It manages data as a valuable resource for any enterprise. For telecom enterprises, the typical areas covered are Master Data Management, Data Warehousing, and Business Intelligence. It is also responsible for data governance, security, quality, and database management. Key responsibilities of Data Management are · Using ETL, extract the data from CRM, Billing, web content, ERP, campaign management, financial, network operations, asset management info, customer contact data, customer measures, benchmarks, process data, e.g., process inputs, outputs, and measures, into Enterprise Data Warehouse. · Management of data traceability with source, data related business rules/decisions, data quality, data cleansing data reconciliation, competitors data – storage for all the enterprise data (customer profiles, products, offers, revenues, etc.) · Get online update through night time replication or physical backup process at regular frequency. · Provide the data access to business intelligence and other systems for their analysis, report generation, and use. (v) Business Intelligence It uses the Enterprise Data to provide the various analysis and reports that contain prospects and analytics for customer retention, acquisition of new customers due to the offers, and SLAs. It will generate right and optimized plans – bolt-ons for the customers. The following lists the high-level roles and responsibilities executed by the Business Intelligence system at the Enterprise Level: · It will do Pattern analysis and reports problem. · It will do Data Analysis – Statistical analysis, data profiling, affinity analysis of data, customer segment wise usage patterns on offers, products, service and revenue generation against services and customer segments. · It will do Performance (business, system, and forecast) analysis, churn propensity, response time, and SLAs analysis. · It will support for online and offline analysis, and report drill down capability. · It will collect, store, and report various SLA data. · It will provide the necessary intelligence for marketing and working on campaigns, etc., with cost benefit analysis and predictions. It will advise on customer promotions with additional services based on loyalty and credit history of customer · It will Interface with Enterprise Data Management system for data to run reports and analysis tasks. It will interface with the campaign schedules, based on historical success evidence. (vi) Stakeholder and External Relations Management It manages the enterprise's relationship with stakeholders and outside entities. Stakeholders include shareholders, employee organizations, etc. Outside entities include regulators, local community, and unions. Some of the processes within this grouping are Shareholder Relations, External Affairs, Labor Relations, and Public Relations. (vii) Enterprise Resource Planning It is used to manage internal and external resources, including tangible assets, financial resources, materials, and human resources. Its purpose is to facilitate the flow of information between all business functions inside the boundaries of the enterprise and manage the connections to outside stakeholders. ERP systems consolidate all business operations into a uniform and enterprise wide system environment. The key roles and responsibilities for Enterprise System are given below: · It will handle responsibilities such as core accounting, financial, and management reporting. · It will interface with CRM for capturing customer account and details. · It will interface with billing to capture the billing revenue and other financial data. · It will be responsible for executing the dunning process. Billing will send the required feed to ERP for execution of dunning. · It will interface with the CRM and Billing through batch interfaces. Enterprise management systems are like horizontals in the enterprise and typically interact with all major telecom systems. E.g., an ERP system interacts with CRM, Fulfillment, and Billing systems for different kinds of data exchanges. 6. External Interfaces/Touch Points The typical external parties are customers, suppliers/partners, employees, shareholders, and other stakeholders. External interactions from/to a Service Provider to other parties can be achieved by a variety of mechanisms, including: · Exchange of emails or faxes · Call Centers · Web Portals · Business-to-Business (B2B) automated transactions These applications provide an Internet technology driven interface to external parties to undertake a variety of business functions directly for themselves. These can provide fully or partially automated service to external parties through various touch points. Typical characteristics of these touch points are · Pre-integrated self-service system, including stand-alone web framework or integration front end with a portal engine · Self services layer exposing atomic web services/APIs for reuse by multiple systems across the architectural environment · Portlets driven connectivity exposing data and services interoperability through a portal engine or web application These touch points mostly interact with the CRM systems for requests, inquiries, and responses. 7. Middleware The component will be primarily responsible for integrating the different systems components under a common platform. It should provide a Standards-Based Platform for building Service Oriented Architecture and Composite Applications. The following lists the high-level roles and responsibilities executed by the Middleware component in the end-to-end solution. · As an integration framework, covering to and fro interfaces · Provide a web service framework with service registry. · Support SOA framework with SOA service registry. · Each of the interfaces from / to Middleware to other components would handle data transformation, translation, and mapping of data points. · Receive data from the caller / activate and/or forward the data to the recipient system in XML format. · Use standard XML for data exchange. · Provide the response back to the service/call initiator. · Provide a tracking until the response completion. · Keep a store transitional data against each call/transaction. · Interface through Middleware to get any information that is possible and allowed from the existing systems to enterprise systems; e.g., customer profile and customer history, etc. · Provide the data in a common unified format to the SOA calls across systems, and follow the Enterprise Architecture directive. · Provide an audit trail for all transactions being handled by the component. 8. Network Elements The term Network Element means a facility or equipment used in the provision of a telecommunications service. Such terms also includes features, functions, and capabilities that are provided by means of such facility or equipment, including subscriber numbers, databases, signaling systems, and information sufficient for billing and collection or used in the transmission, routing, or other provision of a telecommunications service. Typical network elements in a GSM network are Home Location Register (HLR), Intelligent Network (IN), Mobile Switching Center (MSC), SMS Center (SMSC), and network elements for other value added services like Push-to-talk (PTT), Ring Back Tone (RBT), etc. Network elements are invoked when subscribers use their telecom devices for any kind of usage. These elements generate usage data and pass it on to downstream systems like mediation and billing system for rating and billing. They also integrate with provisioning systems for order/service fulfillment. 9. 3rd Party Applications 3rd Party systems are applications like content providers, payment gateways, point of sale terminals, and databases/applications maintained by the Government. Depending on applicability and the type of functionality provided by 3rd party applications, the integration with different telecom systems like CRM, provisioning, and billing will be done. 10. Service Delivery Platform A service delivery platform (SDP) provides the architecture for the rapid deployment, provisioning, execution, management, and billing of value added telecom services. SDPs are based on the concept of SOA and layered architecture. They support the delivery of voice, data services, and content in network and device-independent fashion. They allow application developers to aggregate network capabilities, services, and sources of content. SDPs typically contain layers for web services exposure, service application development, and network abstraction. SOA Reference Architecture SOA concept is based on the principle of developing reusable business service and building applications by composing those services, instead of building monolithic applications in silos. It’s about bridging the gap between business and IT through a set of business-aligned IT services, using a set of design principles, patterns, and techniques. In an SOA, resources are made available to participants in a value net, enterprise, line of business (typically spanning multiple applications within an enterprise or across multiple enterprises). It consists of a set of business-aligned IT services that collectively fulfill an organization’s business processes and goals. We can choreograph these services into composite applications and invoke them through standard protocols. SOA, apart from agility and reusability, enables: · The business to specify processes as orchestrations of reusable services · Technology agnostic business design, with technology hidden behind service interface · A contractual-like interaction between business and IT, based on service SLAs · Accountability and governance, better aligned to business services · Applications interconnections untangling by allowing access only through service interfaces, reducing the daunting side effects of change · Reduced pressure to replace legacy and extended lifetime for legacy applications, through encapsulation in services · A Cloud Computing paradigm, using web services technologies, that makes possible service outsourcing on an on-demand, utility-like, pay-per-usage basis The following section represents the Reference Architecture of logical view for the Telecom Solution. The new custom built application needs to align with this logical architecture in the long run to achieve EA benefits. Packaged implementation applications, such as ERP billing applications, need to expose their functions as service providers (as other applications consume) and interact with other applications as service consumers. COT applications need to expose services through wrappers such as adapters to utilize existing resources and at the same time achieve Enterprise Architecture goal and objectives. The following are the various layers for Enterprise level deployment of SOA. This diagram captures the abstract view of Enterprise SOA layers and important components of each layer. Layered architecture means decomposition of services such that most interactions occur between adjacent layers. However, there is no strict rule that top layers should not directly communicate with bottom layers. The diagram below represents the important logical pieces that would result from overall SOA transformation. @font-face { font-family: "Arial"; }@font-face { font-family: "Courier New"; }@font-face { font-family: "Wingdings"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoCaption, li.MsoCaption, div.MsoCaption { margin: 0cm 0cm 10pt; font-size: 9pt; font-family: "Times New Roman"; color: rgb(79, 129, 189); font-weight: bold; }p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpFirst, li.MsoListParagraphCxSpFirst, div.MsoListParagraphCxSpFirst { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpMiddle, li.MsoListParagraphCxSpMiddle, div.MsoListParagraphCxSpMiddle { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpLast, li.MsoListParagraphCxSpLast, div.MsoListParagraphCxSpLast { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; }ol { margin-bottom: 0cm; }ul { margin-bottom: 0cm; } Figure 3. Enterprise SOA Reference Architecture 1. Operational System Layer: This layer consists of all packaged applications like CRM, ERP, custom built applications, COTS based applications like Billing, Revenue Management, Fulfilment, and the Enterprise databases that are essential and contribute directly or indirectly to the Enterprise OSS/BSS Transformation. ERP holds the data of Asset Lifecycle Management, Supply Chain, and Advanced Procurement and Human Capital Management, etc. CRM holds the data related to Order, Sales, and Marketing, Customer Care, Partner Relationship Management, Loyalty, etc. Content Management handles Enterprise Search and Query. Billing application consists of the following components: · Collections Management, Customer Billing Management, Invoices, Real-Time Rating, Discounting, and Applying of Charges · Enterprise databases will hold both the application and service data, whether structured or unstructured. MDM - Master data majorly consists of Customer, Order, Product, and Service Data. 2. Enterprise Component Layer: This layer consists of the Application Services and Common Services that are responsible for realizing the functionality and maintaining the QoS of the exposed services. This layer uses container-based technologies such as application servers to implement the components, workload management, high availability, and load balancing. Application Services: This Service Layer enables application, technology, and database abstraction so that the complex accessing logic is hidden from the other service layers. This is a basic service layer, which exposes application functionalities and data as reusable services. The three types of the Application access services are: · Application Access Service: This Service Layer exposes application level functionalities as a reusable service between BSS to BSS and BSS to OSS integration. This layer is enabled using disparate technology such as Web Service, Integration Servers, and Adaptors, etc. · Data Access Service: This Service Layer exposes application data services as a reusable reference data service. This is done via direct interaction with application data. and provides the federated query. · Network Access Service: This Service Layer exposes provisioning layer as a reusable service from OSS to OSS integration. This integration service emphasizes the need for high performance, stateless process flows, and distributed design. Common Services encompasses management of structured, semi-structured, and unstructured data such as information services, portal services, interaction services, infrastructure services, and security services, etc. 3. Integration Layer: This consists of service infrastructure components like service bus, service gateway for partner integration, service registry, service repository, and BPEL processor. Service bus will carry the service invocation payloads/messages between consumers and providers. The other important functions expected from it are itinerary based routing, distributed caching of routing information, transformations, and all qualities of service for messaging-like reliability, scalability, and availability, etc. Service registry will hold all contracts (wsdl) of services, and it helps developers to locate or discover service during design time or runtime. • BPEL processor would be useful in orchestrating the services to compose a complex business scenario or process. • Workflow and business rules management are also required to support manual triggering of certain activities within business process. based on the rules setup and also the state machine information. Application, data, and service mediation layer typically forms the overall composite application development framework or SOA Framework. 4. Business Process Layer: These are typically the intermediate services layer and represent Shared Business Process Services. At Enterprise Level, these services are from Customer Management, Order Management, Billing, Finance, and Asset Management application domains. 5. Access Layer: This layer consists of portals for Enterprise and provides a single view of Enterprise information management and dashboard services. 6. Channel Layer: This consists of various devices; applications that form part of extended enterprise; browsers through which users access the applications. 7. Client Layer: This designates the different types of users accessing the enterprise applications. The type of user typically would be an important factor in determining the level of access to applications. 8. Vertical pieces like management, monitoring, security, and development cut across all horizontal layers Management and monitoring involves all aspects of SOA-like services, SLAs, and other QoS lifecycle processes for both applications and services surrounding SOA governance. 9. EA Governance, Reference Architecture, Roadmap, Principles, and Best Practices: EA Governance is important in terms of providing the overall direction to SOA implementation within the enterprise. This involves board-level involvement, in addition to business and IT executives. At a high level, this involves managing the SOA projects implementation, managing SOA infrastructure, and controlling the entire effort through all fine-tuned IT processes in accordance with COBIT (Control Objectives for Information Technology). Devising tools and techniques to promote reuse culture, and the SOA way of doing things needs competency centers to be established in addition to training the workforce to take up new roles that are suited to SOA journey. Conclusions Reference Architectures can serve as the basis for disparate architecture efforts throughout the organization, even if they use different tools and technologies. Reference architectures provide best practices and approaches in the independent way a vendor deals with technology and standards. Reference Architectures model the abstract architectural elements for an enterprise independent of the technologies, protocols, and products that are used to implement an SOA. Telecom enterprises today are facing significant business and technology challenges due to growing competition, a multitude of services, and convergence. Adopting architectural best practices could go a long way in meeting these challenges. The use of SOA-based architecture for communication to each of the external systems like Billing, CRM, etc., in OSS/BSS system has made the architecture very loosely coupled, with greater flexibility. Any change in the external systems would be absorbed at the Integration Layer without affecting the rest of the ecosystem. The use of a Business Process Management (BPM) tool makes the management and maintenance of the business processes easy, with better performance in terms of lead time, quality, and cost. Since the Architecture is based on standards, it will lower the cost of deploying and managing OSS/BSS applications over their lifecycles.

Read the article

You Might Be a DBA

- by BuckWoody

With all apologies to Jeff Foxworthy, I was up late Friday night on a holiday weekend (which translated into T-SQL becomes “Maintenance Window”) and I got bored in between the two or three minutes I had between clicks. So I started a “Twitter” meme – and it just took off. I haven’t cleaned these up much, but here, in author order as of Saturday the 29th of May is the list “You might be a DBA” from around the Twitterverse: buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA buckwoody You have at least one set of scripts you won't share #youmightbeaDBA buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA buckwoody You have children older than the rest of your team #youmightbeaDBA buckwoody You and the Oracle DBA would kill each other, but you'll happily fight off a developer together first #youmightbeaDBA buckwoody You've threatened to quit if they give anyone the sa password on production #youmightbeaDBA buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA buckwoody You have at least one set of scripts you won't share #youmightbeaDBA buckwoody You refer to co-workers as "carbon-units" #youmightbeaDBA buckwoody Being paranoid is on your resume at the top #youmightbeaDBA buckwoody Everyone comes to your cube to find the MSDN DVD's #youmightbeaDBA buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA buckwoody You've worn down developers to get your way by explaining normalization levels #youmightbeaDBA buckwoody You refer to clothes as "Data Abstractions" #youmightbeaDBA buckwoody Users pester you to be able to put data in a database, then they pester you to take it out and put it in Excel #youmightbeaDBA buckwoody Others try to de-duplicate data, you try to copy it to more than three locations #youmightbeaDBA buckwoody You have at least one DLT tape in the trunk of your car #youmightbeaDBA buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA buckwoody Your spouse knows what "ETL" means #youmightbeaDBA buckwoody You've referred to yourself as the "Data Janitor" #youmightbeaDBA buckwoody You don't have positive connotations of the word "upgrade" #youmightbeaDBA buckwoody You get your coffee before you check your servers, because you know you won't get any if you don't #youmightbeaDBA buckwoody You always come to work through the back door so no one hijacks you on the way to your cube #youmightbeaDBA buckwoody You check your server logs before you check your e-mail in the morning so you can reply "Yeah, I already fixed that." #youmightbeaDBA buckwoody You have more conference badges than clean socks #youmightbeaDBA buckwoody Your coffee mug says "It depends" #youmightbeaDBA buckwoody You can convince a boss that you need 16GB of RAM in your laptop #youmightbeaDBA buckwoody You've used ebay to find production equipment #youmightbeaDBA buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA buckwoody You know when your company is acquiring another even before the CFO #youmightbeaDBA buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA buckwoody You call aspirin "work vitamins" #youmightbeaDBA buckwoody You get the same amount of sleep even after you have a child #youmightbeaDBA buckwoody You obsess about performance metrics from over one year ago #youmightbeaDBA buckwoody The first thing you buy after the database software is aftermarket tools to manage the database software #youmightbeaDBA buckwoody You've tried to convince someone else to become a DBA #youmightbeaDBA buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA buckwoody You only know other DBA's by their Tweet Handle #youmightbeaDBA buckwoody You've explained the difference between 32 and 64-bit to more than one manager in terms they can understand, using puppets #youmightbeaDBA buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA buckwoody You've driven to the Datacenter to install SQL Server because "you don't trust those NOC admins" #youmightbeaDBA buckwoody You pay more for faster Internet connections than cable at home so you don't have to drive in #youmightbeaDBA buckwoody You call texting a "queuing system" #youmightbeaDBA buckwoody You know that if someone can read Perl, they manage an Oracle system #youmightbeaDBA buckwoody You have an e-mail rule for backup notifications #youmightbeaDBA buckwoody Your food pyramid includes coffee, salt and fat #youmightbeaDBA buckwoody You wish everything had a graphical query plan #youmightbeaDBA buckwoody You refactor your e-mails #youmightbeaDBA buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA buckwoody You've written blog posts on technology you've never actually implemented in production #youmightbeaDBA buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA buckwoody @MidnightDBA Click the #youmightbeaDBA tag. I've had WAY too much coffee today. buckwoody There is no other position that is 1-deep except you and the CEO #youmightbeaDBA buckwoody When you watch "The Office" you call it "OJT" #youmightbeaDBA buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA buckwoody Your blog would make a "best practices" or "worst practices" book #youmightbeaDBA buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA buckwoody The first thing you install on your netbook is SSMS #youmightbeaDBA buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA buckwoody Your watch is set to UTC because it's just easier #youmightbeaDBA buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA buckwoody * == bad #youmightbeaDBA buckwoody * == bad #youmightbeaDBA buckwoody There are just as many females in your technical field as males #youmightbeaDBA buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA buckwoody You refer to time as a "Clustered Index" #youmightbeaDBA buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA buckwoody You think a millisecond is a really long time #youmightbeaDBA buckwoody You're sitting and typing #youmightbeaDBA when you could be outside #youmightbeaDBA buckwoody You can't wait for a technical conference so you can wear a kilt - and you're not Scottish #youmightbeaDBA buckwoody You know that "DBA" stands for "Default Blame Acceptor" #youmightbeaDBA buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA buckwoody You know what "the truth, thole truth and nothing but the truth, so help me Codd" means #youmightbeaDBA buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA buckwoody You can't talk fast enough to get a concept out of your head so you tweet it instead #youmightbeaDBA buckwoody You cry when someone doesn't use a WHERE clause #youmightbeaDBA buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA buckwoody You think "Set theory" is not an verb but a noun #youmightbeaDBA buckwoody You try to convince random strangers to vote on your Connect item #youmightbeaDBA buckwoody You think 3 hours of contiguous sleep is a good thing #youmightbeaDBA or #youmightbeamother buckwoody You don't like Oracle, and not just because of what she did to Neo #youmightbeaDBA buckwoody You know when to say "sequel" and "s-q-l" #youmightbeaDBA buckwoody You know where the data is #youmightbeaDBA buckwoody You refer to your children as "Fully Redundant Mirrors" #youmightbeaDBA buckwoody Holiday == "Maintenance Window" #youmightbeaDBA buckwoody Your laptop is more powerful than the servers in most companies - including your own #youmightbeaDBA buckwoody You capitalize SELECTed words #youmightbeaDBA buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA buckwoody You cringe in public when the word "upgrade" is used in a sentence #youmightbeaDBA buckwoody Holiday == "Maintenance Window" #youmightbeaDBA buckwoody All Data Is MetaData means something to you #youmightbeaDBA buckwoody You've never seen the driveway to your house in the daylight #youmightbeaDBA buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA buckwoody Most of your bloodstream is composed of caffeine #youmightbeaDBA buckwoody Your task list is labeled "CRUD Matrix" #youmightbeaDBA buckwoody You call your wife/husband a "Linked Server" #youmightbeaDBA anonythemouse When someone tells you they are going to take a dump and you wonder of which database then #youmightbeaDBA anonythemouse When it's 11pm on a holiday weekend and you are working #youmightbeaDBA anonythemouse When you sit down at a table and look for it's primary key #youmightbeaDBA anonythemouse When getting milk from the fridge you check the expiry date is > getdate() #youmightbeaDBA blakmk when you wake up dreaming about sql #youmightbeaDBA CharlesGarver You think a @buckwoody bobblehead would be a cool thing to have on the dashboard of your car #youmightbeaDBA CharlesGarver Your friends don't understand why you think there's a difference between single and double quotes #youmightbeaDBA CharlesGarver Even the newest employees know your name from all the downtime notices you've sent out #youmightbeaDBA CharlesGarver You sometimes feel anxious and think "I should test restoring those backups" and then the feeling passes #youmightbeadba CharlesGarver You know what a co-worker means when they ask "how is your squirrel server?" #youmightbeadba CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA CharlesGarver You're willing to move someone's job up in priority for a box of #voodoodonuts #youmightbeaDBA CharlesGarver Each person in your company seems to think you work for THEM #youmightbeaDBA CharlesGarver You have a Love/Hate relationship going on with #Microsoft #youmightbeaDBA CharlesGarver People ask you to troubleshoot their Access program #youmightbeaDBA CharlesGarver The first words you hear in the morning are 'your voicemail box is full' #youmightbeaDBA CharlesGarver The thought of disrupting 500 people's work so you can do something doesn't phase you #youmightbeaDBA CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA CharlesGarver Your home computer is backed up in 3 different places #youmightbeaDBA CharlesGarver Your wardrobe for work includes pajamas #youmightbeaDBA CharlesGarver Someone tells you to look in the INDEX and you look puzzled before finally going to the back of the book. #youmightbeaDBA chuckboycejr If you have ever set up a SQLAgent job to email your mobile phone to serve as an alarm clock #youmightbeaDBA chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA chuckboycejr If you'd wrestle a SysAdmin to the ground to implement #DPA best practices as per @aspiringgeek #youmightbeaDBA databaseguy I need to be up in 7 hours, so I'm off to bed! I'll have to read the rest of @buckwoody's #youmightbeaDBA posts in the AM. (g'night Buck!) databaseguy When people ask you about your house, the first thing you describe is the network. #youmightbeaDBA databaseguy The last thing you say at the office each day is, "is anybody else here? I'm shutting off the lights!" #youmightbeaDBA databaseguy Your blood pressure rises when you read application specs drafted by marketing. #youmightbeaDBA databaseguy A good day at work is one when nobody pays you no mind. #youmightbeaDBA databaseguy You care about latches and wait states. #youmightbeaDBA databaseguy You have worked over 200 hours on a performance tuning project that required no application changes at all. #youmightbeaDBA databaseguy The late-night security guard knows the names of your spouse and kids. #youmightbeaDBA databaseguy You have had vigorous debates about whether it should be pronounced "sequel" or "ess-queue-ell". #youmightbeaDBA databaseguy You have VPN and RDP software installed on your phone ... just in case. #youmightbeaDBA databaseguy You have edited a data file by hand, just to see what would happen. #youmightbeaDBA databaseguy You decorate your office walls with database catalog posters. #youmightbeaDBA databaseguy You've built programs that access data just to keep other developers from asking you to run queries all the time. #youmightbeaDBA databaseguy When you watch movies like The Matrix, you find yourself calculating the fasibility of storing all that data. #youmightbeaDBA databaseguy You have tried to convince someone to spend money on an SSD storage array. #youmightbeaDBA databaseguy When CPU is spiked on a server, you want to gather forensic evidence. #youmightbeaDBA databaseguy You have to remind developers not to push code to production without checking if the database is ready. #youmightbeaDBA databaseguy Nobody cares what you wear to work, as long as the thing keeps running. #youmightbeaDBA databaseguy Telepathy is a job requirement when working with app dev teams. #youmightbeaDBA databaseguy You read database statistics for the educational value. #youmightbeaDBA databaseguy And your boss freely admits this to anyone within earshot. #youmightbeaDBA databaseguy Your boss cannot explain or understand what you do. #youmightbeaDBA databaseguy You envision ERDs when you see a GUI. #youmightbeaDBA databaseguy You say things like "applications come and go, but data lasts forever." #youmightbeaDBA databaseguy You have memorized the names of several of the AdventureWorks employees. #youmightbeaDBA databaseguy You know what MAXDOP setting you can get away with for a big query based on current server load. #youmightbeaDBA databaseguy And you immediately recognize the recursion in my last tweet. #youmightbeaDBA databaseguy You find 50 simultaneous tweets from @buckwoody about #youmightbeaDBA :O) DBAishness You have "funny stories" about the times your developers accidentally deleted the T-log in their test environment. #youmightbeaDBA DBAishness Planning to slice and dice your MDW data with PowerPivot makes you giggle like a schoolgirl. #youmightbeaDBA donalddotfarmer You think @buckwoody lives in the "real world." #youmightbeaDBA jamach09 @buckwoody #youmightbeaDBA Why go outside when you can sit in the nice cool server room? jamach09 If you refer to procreation as "Replication", #youmightbeaDBA. jamach09 If you think ORM is a four-letter word, #youmightbeaDBA JamesMarsh If you have ever preached the value of Source Code Control, #YouMightBeADBA jethrocarr @venzann You store your shopping list in a ACID compliant DB #youmightbeaDBA joe_positive @buckwoody thought it stood for "Don't Bother Asking" #youmightbeaDBA joe_positive when you check your IT Events Calendar before making weekend plans #youmightbeaDBA LadyRuna You cringe whenever someone calls Excel a database #youmightbeaDBA LadyRuna When the waiter says he'll be your server today, you ask how many terabytes he is #youmightbeaDBA LadyRuna you always call the asterisk a "Star" #youmightbeaDBA LadyRuna You walk into a server room, say "Nice RACK!" and everyone there knows you're talking about server rack... #youmightbeaDBA LadyRuna You receive more messages from servers than from friends #youmightbeaDBA LadyRuna hmmm... #youmightbeaDBA if your recipe for gumbo is "SELECT * FROM Refrigerator" markjholmes @SQLSoldier Heh. #youmightbeaDBA if you correct other DBAs' spelling of @PaulRandal markjholmes #youmightbeaDBA if you actually test RAID5 vs RAID10 on your SAN because when it comes to configuration, "it depends." markjholmes #youmightbeaDBA if you have at least 3 definitions of the word "cluster" MarlonRibunal 3 Words: @BrentO, snicker, & Access #youmightbeaDBA MarlonRibunal @onpnt @mikeSQL my appeal was a couple of mins late. Enjoying #youmightbeaDBA MarlonRibunal @mikeSQL @onpnt pls, don't mention bacon #youmightbeaDBA merv @buckwoody You HATE 3-way joins #youmightbeaDBA MidnightDBA If you're up at midnight Tweeting about SQL #youmightbeaDBA MidnightDBA @buckwoody I'd noticed that. :) #youmightbeaDBA mikeSQL when people talk about "their type" you're thinking varchar, bigint, binary, etc #youmightbeadba mikeSQL people ask you to go to lunch , but you can't go because you're attending #SQLlunch #youmightbeadba mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba mrdenny If you think that @buckwoody's demo using PowerPivot to analyze index usage data from DMVs is awesome then #youmightbeaDBA mrdenny You wish @PaulRandal still worked at Microsoft so that they would make a bobble head of him #youmightbeadba mrdenny When it's 11pm on a holiday weekend, and your posting stupid jokes on Twitter then #youmightbeadba mrdenny If you go out with friends and wonder why no one's wearing a kilt then #YouMightBeADBA mrdenny You can't do basic math, but you know off the top of your head how many CALs $14,412 can buy you. #YoumightbeaDBA mrdenny If you've ever setup a SQL Job to email you to get you out of a regularly scheduled meeting #YouMightBeADBA. mrdenny You throw up in your mouth a little when ever you here the word "Access". Even if it doesn't relate to a MS product. #YouMightBeADBA msdtjones You spend more time listening to @buckwoody than your wife #youmightbeaDBA NFDotCom You perform "hail deltas" on a regular basis. #YouMightBeADBA NoelMcKinney If you tell your wife you want to go to Columbus Ohio for your wedding anniversary so you can attend #sqlsat42 then #youmightbeaDBA NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA NoelMcKinney Someone asks you to throw another log on the fire and you tell them not to worry about it because Autogrowth is turned on #youmightbeaDBA Nuurdygirl Even if you have a girlfriend...its possible #youmightbeadba. Yeah-i said its possible! Nuurdygirl When your girlfriend has to lean around the laptop to kiss you goodnight #youmightbeadba Old_Man_Fish If you worry about how big your package is and how long it takes to finish #youmightbeaDBA Old_Man_Fish If you no longer wonder if someone is in trouble or died if you are getting calls at 2AM #youmightbeaDBA Old_Man_Fish If, when you hear the word ACCESS with no connotation you blood pressure jumps 50 points, #youmightbeaDBA onpnt When you hear the word inject you immediately get concerned if your databases are OK #youmightbeaDBA onpnt Your servers haven't been rebooted in a year #youmightbeaDBA onpnt You know why it's funny when @PaulRandal has the word, "Sheep" in a tweet #youmightbeaDBA onpnt You have read BOL without actually having a problem to figure out #youmightbeaDBA onpnt You can type "SELECT columns FROM tables" without typos but tipen ni Banglish ares a messis #youmightbeaDBA onpnt DR strategies doesn't include the word, RAID in them #youmightbeaDBA onpnt you can move a SQL Server instance to a new server without the users ever knowing #youmightbeaDBA onpnt You have made an SSIS package that is more than one step #youmightbeaDBA onpnt You have the balls to say no to your boss when they ask for the sa password #youmightbeaDBA onpnt you google to trouble shoot a problem and end up at your own blog (and it fixes it) #youmightbeaDBA onpnt You talk your wife into moving the family vacation a week earlier so you can attend the areas local SSUG meeting #youmightbeaDBA onpnt you can explain to a nontechnical person what a deadlock is #youmightbeaDBA onpnt You hope a girl asks you what your collation is #youmightbeaDBA onpnt you make jokes that include the words shrink, truncate and 1205. And you are the only one that laughs at them #youmightbeaDBA onpnt You rate your ability to stay awake to work longer on blogs, twitter, forums and your day to day job with the 5 9's goal #youmightbeaDBA onpnt you have major surgery and beg the doctor to release you back to work 5 days later because you miss your servers #youmightbeaDBA #TrueStory onpnt You do have backups and you know how to use them #youmightbeaDBA onpnt It's the network #youmightbeaDBA onpnt When the developers get to work your mood changes rapidly #youmightbeaDBA onpnt When someone says, "PASS", you first think of karaoke #youmightbeaDBA onpnt Recruiters try to get you to call them *just* because they think you'll give them @BrentO contact info #youmightbeaDBA onpnt You chuckle every time you go to grab the "CLR" Calcium, Lime and Rust Remover to clean something #youmightbeaDBA onpnt @MarlonRibunal @mikeSQL Sorry man, it was already in motion ;-) #youmightbeaDBA onpnt When you have an "I love bacon" sticker on your laptop. #youmightbeaDBA http://twitpic.com/1ry671 onpnt You sing SELECT statements in the shower #youmightbeaDBA onpnt When you see a chicken it doesn't remind you of food. It reminds you of a guy named Jorge #youmightbeaDBA onpnt At time, SQL is your mistress #youmightbeaDBA onpnt Your wife wonders if SQL is the code name of your mistress at times #youmightbeaDBA onpnt it's Friday and you are on twitter thinking really hard about what would be funny for hash tag #youmightbeaDBA onpnt You organize your wife's "decorative"pillows on the bed in a B-Tree structure #youmightbeaDBA PaulWhiteNZ If you: SELECT TOP (1) milk FROM fridge WHERE use_by_date >= GET_DATE() ORDER BY use_by_date ASC #YouMightBeaDBA RonDBA #youmightbeaDBA if you read @buckwoody's and @BrentO's blogs. ryaneastabrook @buckwoody omg, you have to stand up a website with these on them, they are awesome #youmightbeaDBA soulvy @StrateSQL @LadyRuna Or a "Splat" #youmightbeaDBA speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA speedracer You retweet @buckwoody on a Friday night #youmightbeaDBA speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA speedracer Developers make you twitch #youmightbeaDBA sqlagentman You know what X/1024*8 is. #YouMightBeADBA SqlAsylum Your still in the office at 5:00 on memorial day weekend. #youmightbeadba :) SQLBob Whenever someone you know gets pregnant you bring up INNER JOINs or SQL Injection attacks... #youmightbeaDBA SQLChicken You know one or more SQL folks in the community with an animal in their username #youmightbeaDBA SQLChicken You've used one or more car analogies to explain how a database works #youmightbeaDBA SQLChicken “@sqljoe: #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you” lmao nice! SQLChicken When talking about SSIS your discussions break down into various jokes about packages #youmightbeaDBA SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA SQLCraftsman You really own a "Stick of Much Developer Whacking" #YouMightBeADBA SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA SQLCraftsman Default Blame Acceptor #YouMightBeADBA SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA SQLCraftsman Default Blame Acceptor #YouMightBeADBA SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA sqljoe #youmightbeaDBA if you wished your wife knew T-sql. USE ShoppingList SELECT NecessaryItems from Supermarket WHERE Category<> ("junk food") sqljoe #youmightbeaDBA if the first thing you kiss when you wake up is your mobile for not waking you up in the middle of the night sqljoe #youmightbeaDBA if your wife has a "Do Not Fly" family vacation list of her own including your laptop and mobile sqljoe #youmightbeaDBA if you have researched for DBA Anonymous groups and attended a #SSUG willing to drop your database (vice) sqljoe #youmightbeaDBA if your only maintenance windows are staff meetings sqljoe #youmightbeaDBA if you think of yourself as "The One" in The Matrix "balancing the equation" from The Architect's (developers) poor coding sqljoe #youmightbeaDBA if you think @PaulRandal should have played the Oracle in The Matrix sqljoe #youmightbeaDBA if home CD & Movie collection is stored in secured containers,in logical order & naming convention,and with a backup copy sqljoe #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you sqljoe #youmightbeaDBA if you have tried to TiVo @MidnightDBA broadcasts sqljoe #youmightbeaDBA if your #sql user group feels like #AA meetings sqljoe #youmightbeaDBA if you thought of bringing your #sql books to #sqlsaturday and #sqlpass for autographs sqljoe #youmightbeaDBA if #sqlpass feels like the #oscars sqljoe #youmightbeaDBA if you are proud of your small package SQLLawman #youmightbeaDBA when you hear MDX and Acura is not first thought that comes to mind. sqlrunner If your wife double checks that there isn't a SQLSat within 200 miles of your vacation destination #youmightbeaDBA sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA sqlrunner You treat the word 'access' as a verb, not a noun #youmightbeaDBA sqlrunner If you are happy with sub-second performance #youmightbeaDBA sqlrunner When you know the names of the NOC people AND their families #youmightbeadba sqlrunner When you know the names of the NOC people AND their families #youmightbeadba sqlrunner Your company set's up international phone coverage for your cruise #youmightbeaDBA sqlsamson @buckwoody if your manager asks you for data and you respond with "there's a script for that" #youmightbeadba sqlsamson @buckwoody If you receive more messages from your server then your spouse #youmightbeadba SQLSoldier You've spent all night Valentines Day upgrading the SQL Servers and forgot to tell your wife you'd be working late. #youmightbeadba SQLSoldier You're flattered when someone calls you a geek. #youmightbeadba SQLSoldier @llangit @mrdenny it's 11pm on a holiday weekend, & your reading stupid jokes on Twitter then #youmightbeadba SQLSoldier Your manager borrows lunch money from you because your salary is 30% higher than his. #youmightbeaDBA SQLSoldier You think "intellisense" is a double negative because it's not intelligent nor makes sense. #youmightbeaDBA SQLSoldier 75% of the emails you receive at home have the phrase "now following you on Twitter!" in the subject line. #youmightbeaDBA SQLSoldier You petition Ken Burns to remake Office Space because it should have been 18 hours long. #youmightbeaDBA SQLSoldier You select a candidate for a Jr DBA position because his resume said he's willing to get your coffee. #youmightbeaDBA SQLSoldier Somebody misquotes @PaulRandall and you call him on your cell to verify. #youmightbeaDBA SQLSoldier You wish the elevator in your building was slower because it's the last time you'll be left alone all day. #youmightbeaDBA SQLSoldier The developers sacrifice small animals before giving you their code for review. #youmightbeaDBA SQLSoldier Developers bring you coffee and a BLT when you review their code. #youmightbeaDBA #IWish SQLSoldier You can get out of any family get-together by saying you have to work and nobody questions it. #youmightbeaDBA SQLSoldier You've requested a HP Superdome for you "test" box. #youmightbeaDBA SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA SQLSoldier A dev. asks if you've heard about some great new feature in SQL and you show the 16 blog posts you wrote on it ... last year #youmightbeaDBA SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA #TrueStory SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA SQLSoldier You use a cell phone service coverage map to plan your next vacation. #youmightbeaDBA SQLSoldier You come in to work at 7 AM because it gives you at least 3 hours without any developers around. #youmightbeaDBA SQLSoldier You figure out a way to make take your wife on a cruise and deduct it as a business expense. #youmightbeaDBA #sqlcruise SQLSoldier You name your cat SQLDog because the name @SQLCat was already taken. #youmightbeaDBA SQLSoldier You rate your blog posts based on the number of retweets you get. #youmightbeaDBA SQLSoldier You disable random logins just to mess with people. #youmightbeaDBA SQLSoldier You fall for the pickup line, "Hey baby, what's your collation?" #youmightbeaDBA SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA SQLSoldier Your think the 4 food groups are coffee, bacon, fast food, and Mountain Dew. #youmightbeaDBA SQLSoldier You tell someone your job title and they ask "What?" You describe it and they ask "What?". So you say "computer geek". #youmightbeaDBA SQLSoldier The #1 referrer to your blog is Twitter.com. #youmightbeaDBA SQLSoldier Your idea of a good time on a Saturday involves free training. #youmightbeaDBA #sqlsat43 SQLSoldier You write a book that all of your co-workers have and none have read it. #youmightbeaDBA SQLSoldier You write a book that sells a couple thousand copies and is heralded a best seller. #youmightbeaDBA SQLSoldier No matter how sick you are, you go to work if it's time to pass the pager on to the next guy. #youmightbeaDBA #TrueStory SQLSoldier You go out on the town, and strangers walk up to you and say, "Hey you're that SQL guy" #youmightbeaDBA #TrueStory SQLSoldier Your wife asks you to fix something, and you request a downtime window. #youmightbeaDBA SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA SQLSoldier Your best pickup line, "Hey baby, what's your collation?" #youmightbeaDBA SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA SQLSoldier You list TSQL as your native language on the 2010 census. #youmightbeaDBA SQLSoldier Starbucks' stock price drops every time you go on vacation. #youmightbeaDBA SQLSoldier You're happy when the web master says that the website is down. #youmightbeaDBA SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA SQLSoldier You get mad when someone calls your car a "heap" because you've always considered it to be a "clustered index". #youmightbeaDBA SQLSoldier Your blog has more hits than your company's website. #youmightbeaDBA SQLSoldier You systematically remove the asterisk key from all keyboards in the company except yours. #youmightbeaDBA SQLSoldier When asked if you recycle, you reply that you run sp_cycle_errorlog every night at midnight #youmightbeaDBA SQLSoldier You wouldn't allow someone named @AdamMachanic to work on your car. #youmightbeaDBA SQLSoldier You switch offices every 3 days to avoid developers #youmightbeaDBA SQLSoldier PSS has your number on speed dial. #youmightbeaDBA SQLSoldier You frown when you they tell Neo that he's going to the Oracle #youmightbeaDBA swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA Tarwn A pleasurable saturday means spending the day learning more about what you already do the rest of the week #youmightbeaDBA ...oh, wait... thelostforum For great justice; all our base are belong to YOU !! #youmightbeadba thelostforum @SQLSoldier: You need a witness to use a mirror #youmightbeaDBA ;) TimCost you capitalize key words. always. everywhere. you can't help it, usually don't even notice. #youmightbeaDBA Toshana Your the only one in your company not impressed with the developers new application. #youmightbeaDBA venzann Coming soon from a (respected) book publisher - @buckwoody's #youmightbeaDBA venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets... venzann I love the #youmightbeaDBA tag. Found at least 6 new DBAs to follow.. venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets... venzann You use #sqlhelp as a primary resource during troubleshooting #youmightbeaDBA venzann You insist on stricter password security for your sql servers than you implement on your own laptop #youmightbeaDBA WesBrownSQL @buckwoody you are up so late the only tweets you see are from @buckwoody #youmightbeaDBA WesBrownSQL @SQLSoldier you are upgrading all your 2005 prod servers to 2008 R2 on a three day weekend... #youmightbeaDBA zippy1981 #youmightbeaDBA if everytime you do something with #mongodb you think of the Vulcan proverb "only Nixon could go to China." Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

Texture will not apply to my 3d Cube directX

- by numerical25

I am trying to apply a texture onto my 3d cube but it is not showing up correctly. I believe that it might some what be working because the cube is all brown which is almost the same complexion as the texture. And I did not originally make the cube brown. These are the steps I've done to add the texture I first declared 2 new varibles ID3D10EffectShaderResourceVariable* pTextureSR; ID3D10ShaderResourceView* textureSRV; I also added a variable and a struct to my shader .fx file Texture2D tex2D; SamplerState linearSampler { Filter = MIN_MAG_MIP_LINEAR; AddressU = Wrap; AddressV = Wrap; }; I then grabbed the image from my local hard drive from within the .cpp file. I believe this was successful, I checked all varibles for errors, everything has a memory address. Plus I pulled resources before and never had a problem. D3DX10CreateShaderResourceViewFromFile(mpD3DDevice,L"crate.jpg",NULL,NULL,&textureSRV,NULL); I grabbed the tex2d varible from my fx file and placed into my resource varible pTextureSR = modelObject.pEffect->GetVariableByName("tex2D")->AsShaderResource(); And added the resource to the varible pTextureSR->SetResource(textureSRV); I also added the extra property to my vertex layout D3D10_INPUT_ELEMENT_DESC layout[] = { {"POSITION",0,DXGI_FORMAT_R32G32B32_FLOAT, 0 , 0, D3D10_INPUT_PER_VERTEX_DATA, 0}, {"COLOR",0,DXGI_FORMAT_R32G32B32A32_FLOAT, 0 , 12, D3D10_INPUT_PER_VERTEX_DATA, 0}, {"NORMAL",0,DXGI_FORMAT_R32G32B32A32_FLOAT, 0 , 24, D3D10_INPUT_PER_VERTEX_DATA, 0}, {"TEXCOORD",0, DXGI_FORMAT_R32G32_FLOAT, 0 , 36, D3D10_INPUT_PER_VERTEX_DATA, 0} }; as well as my struct struct VertexPos { D3DXVECTOR3 pos; D3DXVECTOR4 color; D3DXVECTOR3 normal; D3DXVECTOR2 texCoord; }; Then I created a new pixel shader that adds the texture to it. Below is the code in its entirety matrix Projection; matrix WorldMatrix; Texture2D tex2D; float3 lightSource; float4 lightColor = {0.5, 0.5, 0.5, 0.5}; // PS_INPUT - input variables to the pixel shader // This struct is created and fill in by the // vertex shader struct PS_INPUT { float4 Pos : SV_POSITION; float4 Color : COLOR0; float4 Normal : NORMAL; float2 Tex : TEXCOORD; }; SamplerState linearSampler { Filter = MIN_MAG_MIP_LINEAR; AddressU = Wrap; AddressV = Wrap; }; //////////////////////////////////////////////// // Vertex Shader - Main Function /////////////////////////////////////////////// PS_INPUT VS(float4 Pos : POSITION, float4 Color : COLOR, float4 Normal : NORMAL, float2 Tex : TEXCOORD) { PS_INPUT psInput; // Pass through both the position and the color psInput.Pos = mul( Pos, Projection ); psInput.Normal = Normal; psInput.Tex = Tex; return psInput; } /////////////////////////////////////////////// // Pixel Shader /////////////////////////////////////////////// float4 PS(PS_INPUT psInput) : SV_Target { float4 finalColor = 0; finalColor = saturate(dot(lightSource, psInput.Normal) * lightColor); return finalColor; } float4 textured( PS_INPUT psInput ) : SV_Target { return tex2D.Sample( linearSampler, psInput.Tex ); } // Define the technique technique10 Render { pass P0 { SetVertexShader( CompileShader( vs_4_0, VS() ) ); SetGeometryShader( NULL ); SetPixelShader( CompileShader( ps_4_0, textured() ) ); } } Below is my CPU code. It maybe a little sloppy. But I am just adding code anywhere cause I am just experimenting and playing around. You should find most of the texture code at the bottom createObject #include "MyGame.h" #include "OneColorCube.h" /* This code sets a projection and shows a turning cube. What has been added is the project, rotation and a rasterizer to change the rasterization of the cube. The issue that was going on was something with the effect file which was causing the vertices not to be rendered correctly.*/ typedef struct { ID3D10Effect* pEffect; ID3D10EffectTechnique* pTechnique; //vertex information ID3D10Buffer* pVertexBuffer; ID3D10Buffer* pIndicesBuffer; ID3D10InputLayout* pVertexLayout; UINT numVertices; UINT numIndices; }ModelObject; ModelObject modelObject; // World Matrix D3DXMATRIX WorldMatrix; // View Matrix D3DXMATRIX ViewMatrix; // Projection Matrix D3DXMATRIX ProjectionMatrix; ID3D10EffectMatrixVariable* pProjectionMatrixVariable = NULL; ID3D10EffectMatrixVariable* pWorldMatrixVarible = NULL; ID3D10EffectVectorVariable* pLightVarible = NULL; ID3D10EffectShaderResourceVariable* pTextureSR; bool MyGame::InitDirect3D() { if(!DX3dApp::InitDirect3D()) { return false; } D3D10_RASTERIZER_DESC rastDesc; rastDesc.FillMode = D3D10_FILL_WIREFRAME; rastDesc.CullMode = D3D10_CULL_FRONT; rastDesc.FrontCounterClockwise = true; rastDesc.DepthBias = false; rastDesc.DepthBiasClamp = 0; rastDesc.SlopeScaledDepthBias = 0; rastDesc.DepthClipEnable = false; rastDesc.ScissorEnable = false; rastDesc.MultisampleEnable = false; rastDesc.AntialiasedLineEnable = false; ID3D10RasterizerState *g_pRasterizerState; mpD3DDevice->CreateRasterizerState(&rastDesc, &g_pRasterizerState); //mpD3DDevice->RSSetState(g_pRasterizerState); // Set up the World Matrix D3DXMatrixIdentity(&WorldMatrix); D3DXMatrixLookAtLH(&ViewMatrix, new D3DXVECTOR3(0.0f, 10.0f, -20.0f), new D3DXVECTOR3(0.0f, 0.0f, 0.0f), new D3DXVECTOR3(0.0f, 1.0f, 0.0f)); // Set up the projection matrix D3DXMatrixPerspectiveFovLH(&ProjectionMatrix, (float)D3DX_PI * 0.5f, (float)mWidth/(float)mHeight, 0.1f, 100.0f); if(!CreateObject()) { return false; } return true; } //These are actions that take place after the clearing of the buffer and before the present void MyGame::GameDraw() { static float rotationAngleY = 15.0f; static float rotationAngleX = 0.0f; static D3DXMATRIX rotationXMatrix; static D3DXMATRIX rotationYMatrix; D3DXMatrixIdentity(&rotationXMatrix); D3DXMatrixIdentity(&rotationYMatrix); // create the rotation matrix using the rotation angle D3DXMatrixRotationY(&rotationYMatrix, rotationAngleY); D3DXMatrixRotationX(&rotationXMatrix, rotationAngleX); rotationAngleY += (float)D3DX_PI * 0.0008f; rotationAngleX += (float)D3DX_PI * 0.0005f; WorldMatrix = rotationYMatrix * rotationXMatrix; // Set the input layout mpD3DDevice->IASetInputLayout(modelObject.pVertexLayout); pWorldMatrixVarible->SetMatrix((float*)&WorldMatrix); // Set vertex buffer UINT stride = sizeof(VertexPos); UINT offset = 0; mpD3DDevice->IASetVertexBuffers(0, 1, &modelObject.pVertexBuffer, &stride, &offset); // Set primitive topology mpD3DDevice->IASetPrimitiveTopology(D3D10_PRIMITIVE_TOPOLOGY_TRIANGLELIST); //ViewMatrix._43 += 0.005f; // Combine and send the final matrix to the shader D3DXMATRIX finalMatrix = (WorldMatrix * ViewMatrix * ProjectionMatrix); pProjectionMatrixVariable->SetMatrix((float*)&finalMatrix); // make sure modelObject is valid // Render a model object D3D10_TECHNIQUE_DESC techniqueDescription; modelObject.pTechnique->GetDesc(&techniqueDescription); // Loop through the technique passes for(UINT p=0; p < techniqueDescription.Passes; ++p) { modelObject.pTechnique->GetPassByIndex(p)->Apply(0); // draw the cube using all 36 vertices and 12 triangles mpD3DDevice->Draw(36,0); } } //Render actually incapsulates Gamedraw, so you can call data before you actually clear the buffer or after you //present data void MyGame::Render() { DX3dApp::Render(); } bool MyGame::CreateObject() { //Create Layout D3D10_INPUT_ELEMENT_DESC layout[] = { {"POSITION",0,DXGI_FORMAT_R32G32B32_FLOAT, 0 , 0, D3D10_INPUT_PER_VERTEX_DATA, 0}, {"COLOR",0,DXGI_FORMAT_R32G32B32A32_FLOAT, 0 , 12, D3D10_INPUT_PER_VERTEX_DATA, 0}, {"NORMAL",0,DXGI_FORMAT_R32G32B32A32_FLOAT, 0 , 24, D3D10_INPUT_PER_VERTEX_DATA, 0}, {"TEXCOORD",0, DXGI_FORMAT_R32G32_FLOAT, 0 , 36, D3D10_INPUT_PER_VERTEX_DATA, 0} }; UINT numElements = (sizeof(layout)/sizeof(layout[0])); modelObject.numVertices = sizeof(vertices)/sizeof(VertexPos); for(int i = 0; i < modelObject.numVertices; i += 3) { D3DXVECTOR3 out; D3DXVECTOR3 v1 = vertices[0 + i].pos; D3DXVECTOR3 v2 = vertices[1 + i].pos; D3DXVECTOR3 v3 = vertices[2 + i].pos; D3DXVECTOR3 u = v2 - v1; D3DXVECTOR3 v = v3 - v1; D3DXVec3Cross(&out, &u, &v); D3DXVec3Normalize(&out, &out); vertices[0 + i].normal = out; vertices[1 + i].normal = out; vertices[2 + i].normal = out; } //Create buffer desc D3D10_BUFFER_DESC bufferDesc; bufferDesc.Usage = D3D10_USAGE_DEFAULT; bufferDesc.ByteWidth = sizeof(VertexPos) * modelObject.numVertices; bufferDesc.BindFlags = D3D10_BIND_VERTEX_BUFFER; bufferDesc.CPUAccessFlags = 0; bufferDesc.MiscFlags = 0; D3D10_SUBRESOURCE_DATA initData; initData.pSysMem = vertices; //Create the buffer HRESULT hr = mpD3DDevice->CreateBuffer(&bufferDesc, &initData, &modelObject.pVertexBuffer); if(FAILED(hr)) return false; /* //Create indices DWORD indices[] = { 0,1,3, 1,2,3 }; ModelObject.numIndices = sizeof(indices)/sizeof(DWORD); bufferDesc.ByteWidth = sizeof(DWORD) * ModelObject.numIndices; bufferDesc.BindFlags = D3D10_BIND_INDEX_BUFFER; initData.pSysMem = indices; hr = mpD3DDevice->CreateBuffer(&bufferDesc, &initData, &ModelObject.pIndicesBuffer); if(FAILED(hr)) return false;*/ ///////////////////////////////////////////////////////////////////////////// //Set up fx files LPCWSTR effectFilename = L"effect.fx"; modelObject.pEffect = NULL; hr = D3DX10CreateEffectFromFile(effectFilename, NULL, NULL, "fx_4_0", D3D10_SHADER_ENABLE_STRICTNESS, 0, mpD3DDevice, NULL, NULL, &modelObject.pEffect, NULL, NULL); if(FAILED(hr)) return false; pProjectionMatrixVariable = modelObject.pEffect->GetVariableByName("Projection")->AsMatrix(); pWorldMatrixVarible = modelObject.pEffect->GetVariableByName("WorldMatrix")->AsMatrix(); pTextureSR = modelObject.pEffect->GetVariableByName("tex2D")->AsShaderResource(); ID3D10ShaderResourceView* textureSRV; D3DX10CreateShaderResourceViewFromFile(mpD3DDevice,L"crate.jpg",NULL,NULL,&textureSRV,NULL); pLightVarible = modelObject.pEffect->GetVariableByName("lightSource")->AsVector(); //Dont sweat the technique. Get it! LPCSTR effectTechniqueName = "Render"; D3DXVECTOR3 vLight(1.0f, 1.0f, 1.0f); pLightVarible->SetFloatVector(vLight); modelObject.pTechnique = modelObject.pEffect->GetTechniqueByName(effectTechniqueName); if(modelObject.pTechnique == NULL) return false; pTextureSR->SetResource(textureSRV); //Create Vertex layout D3D10_PASS_DESC passDesc; modelObject.pTechnique->GetPassByIndex(0)->GetDesc(&passDesc); hr = mpD3DDevice->CreateInputLayout(layout, numElements, passDesc.pIAInputSignature, passDesc.IAInputSignatureSize, &modelObject.pVertexLayout); if(FAILED(hr)) return false; return true; } And here is my cube coordinates. I actually only added coordinates to one side. And that is the front side. To double check I flipped the cube in all directions just to make sure i didnt accidentally place the text on the incorrect side //Create vectors and put in vertices // Create vertex buffer VertexPos vertices[] = { // BACK SIDES { D3DXVECTOR3(-5.0f, 5.0f, 5.0f), D3DXVECTOR4(1.0f,0.0f,0.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(-5.0f, -5.0f, 5.0f), D3DXVECTOR4(1.0f,0.0f,0.0f,0.0f), D3DXVECTOR2(1.0,0.0)}, { D3DXVECTOR3(5.0f, 5.0f, 5.0f), D3DXVECTOR4(1.0f,0.0f,0.0f,0.0f), D3DXVECTOR2(0.0,1.0)}, { D3DXVECTOR3(5.0f, 5.0f, 5.0f), D3DXVECTOR4(1.0f,0.0f,0.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(-5.0f, -5.0f, 5.0f), D3DXVECTOR4(1.0f,0.0f,0.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(5.0f, -5.0f, 5.0f), D3DXVECTOR4(1.0f,0.0f,0.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, // 2 FRONT SIDE { D3DXVECTOR3(-5.0f, 5.0f, -5.0f), D3DXVECTOR4(0.0f,1.0f,0.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(5.0f, 5.0f, -5.0f), D3DXVECTOR4(0.0f,1.0f,0.0f,0.0f), D3DXVECTOR2(2.0,0.0)}, { D3DXVECTOR3(-5.0f, -5.0f, -5.0f), D3DXVECTOR4(0.0f,1.0f,0.0f,0.0f), D3DXVECTOR2(0.0,2.0)}, { D3DXVECTOR3(-5.0f, -5.0f, -5.0f), D3DXVECTOR4(0.0f,1.0f,0.0f,0.0f), D3DXVECTOR2(0.0,2.0)}, { D3DXVECTOR3(5.0f, 5.0f, -5.0f), D3DXVECTOR4(0.0f,1.0f,0.0f,0.0f) , D3DXVECTOR2(2.0,0.0)}, { D3DXVECTOR3(5.0f, -5.0f, -5.0f), D3DXVECTOR4(0.0f,1.0f,0.0f,0.0f), D3DXVECTOR2(2.0,2.0)}, // 3 { D3DXVECTOR3(-5.0f, 5.0f, 5.0f), D3DXVECTOR4(0.0f,0.0f,1.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(5.0f, 5.0f, 5.0f), D3DXVECTOR4(0.0f,0.0f,1.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(-5.0f, 5.0f, -5.0f), D3DXVECTOR4(0.0f,0.0f,1.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(-5.0f, 5.0f, -5.0f), D3DXVECTOR4(0.0f,0.0f,1.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(5.0f, 5.0f, 5.0f), D3DXVECTOR4(0.0f,0.0f,1.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(5.0f, 5.0f, -5.0f), D3DXVECTOR4(0.0f,0.0f,1.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, // 4 { D3DXVECTOR3(-5.0f, -5.0f, 5.0f), D3DXVECTOR4(1.0f,0.5f,0.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(-5.0f, -5.0f, -5.0f), D3DXVECTOR4(1.0f,0.5f,0.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(5.0f, -5.0f, 5.0f), D3DXVECTOR4(1.0f,0.5f,0.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(5.0f, -5.0f, 5.0f), D3DXVECTOR4(1.0f,0.5f,0.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(-5.0f, -5.0f, -5.0f), D3DXVECTOR4(1.0f,0.5f,0.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(5.0f, -5.0f, -5.0f), D3DXVECTOR4(1.0f,0.5f,0.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, // 5 { D3DXVECTOR3(5.0f, 5.0f, -5.0f), D3DXVECTOR4(0.0f,1.0f,0.5f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(5.0f, 5.0f, 5.0f), D3DXVECTOR4(0.0f,1.0f,0.5f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(5.0f, -5.0f, -5.0f), D3DXVECTOR4(0.0f,1.0f,0.5f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(5.0f, -5.0f, -5.0f), D3DXVECTOR4(0.0f,1.0f,0.5f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(5.0f, 5.0f, 5.0f), D3DXVECTOR4(0.0f,1.0f,0.5f,0.0f), D3DXVECTOR2(0.0,0.0)}, { D3DXVECTOR3(5.0f, -5.0f, 5.0f), D3DXVECTOR4(0.0f,1.0f,0.5f,0.0f), D3DXVECTOR2(0.0,0.0)}, // 6 {D3DXVECTOR3(-5.0f, 5.0f, -5.0f), D3DXVECTOR4(0.5f,0.0f,1.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, {D3DXVECTOR3(-5.0f, -5.0f, -5.0f), D3DXVECTOR4(0.5f,0.0f,1.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, {D3DXVECTOR3(-5.0f, 5.0f, 5.0f), D3DXVECTOR4(0.5f,0.0f,1.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, {D3DXVECTOR3(-5.0f, 5.0f, 5.0f), D3DXVECTOR4(0.5f,0.0f,1.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, {D3DXVECTOR3(-5.0f, -5.0f, -5.0f), D3DXVECTOR4(0.5f,0.0f,1.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, {D3DXVECTOR3(-5.0f, -5.0f, 5.0f), D3DXVECTOR4(0.5f,0.0f,1.0f,0.0f), D3DXVECTOR2(0.0,0.0)}, };

Read the article

Twitter Bootstrap styling conflicts with plug-ins like jqGrid and other third part libraries

- by Renso

Issues:The concern is that the Twitter Bootstrap framework is that some of their css selectors are simply too generic and have incompatibility issues and conflicts with most third party plug-ins and css libraries, like jQuery-UI and jqGrid.My most pressing concern is only with the generic selector for the styling of "INPUT" controls.Some concerns:So basically anyone using BS (Bootstrap) will have to override styling 100% of the time on all input controls on all their web pages for all the plug-ins they use that render their own styling for input controls. This seems to chisel away any reason for using Bootstrap. Overriding Bootstrap css in this case seems illogical at best as it implies the BS styling is not correct or as granular as it is supposed to be. It also suggests you realize there is an issue here. Any person who has written a fair amount of css will realize that it is a mammoth task to to take an existing app, converting it to BS and then having to find all non-BS input controls and styling them all. The worst part is that there is no generic styling for this as each input control has a different source/context, some are regular tags and some belong to plug-ins, each with their own flavor of styling. For new web apps the challenge is not that different, each time you add a new plug-in you will have to test all facets of it, and I mean all of it, pop-ups, etc, that contain any kind of input control to make sure it is styled correctly. I am having a hard time seeing the benefits of BS in this context. So until the BS team addresses the issue, or not, you may be wondering what is the easiest solution.Help the community to drive this issue home by creating a new issue on github, see my entry here: https://github.com/twitter/bootstrap/issues/4008. As you can see I got some good and some negative feedback, but we all agree it is an issue. I do believe my solution below should be reverse compatible if the proper class declarations were followed as recommended by Bootstrap.The solution:Add a higher-level qualifier to the input selector, which may not break anything. Add "control-group" and "controls" classes as higher-level selectors, as they have to be declared inside those classes anyway as far as I understand the design approach of BS. So in my example below can modify the css without possible breaking anything, see the css at the bottom. I tested this briefly and seems to render just as expected. May not be complete as I only spent a few minutes on the css. Your feedback will be greatly appreciated. <div class="control-group"> <label title="" for="Contact_FirstName" class="control-label">First Name</label> <div class="controls"> <input type="text" value="" name="Contact.FirstName" id="Contact_FirstName" data-val-required="The Reader Contact&#39;s First Name is required" data-val-length-min="2" data-val-length-max="250" data-val-length="The maximum length allowed for the Reader Contact&#39;s First Name is 250 characters and must be two or more characters long" data-val="true" class="input-medium"> <span data-valmsg-replace="true" data-valmsg-for="Contact.FirstName" class="field-validation-valid"></span> </div></div>Here are the SCSS (SASS) updates. In stead of just including the updates I decided to include the entire bootstrap SCSS file so you can just copy-and-paste it in stead of trying to figure out what selectors have changed./*! * Bootstrap v2.0.4 * Enhacement by Renso Hollhumer * Copyright 2012 Twitter, Inc * Licensed under the Apache License v2.0 * http://www.apache.org/licenses/LICENSE-2.0 * * Designed and built with all the love in the world @twitter by @mdo and @fat. * Enhancement by Renso Hollhumer: To isolate styling of INPUT tags to the Bootstrap context only */.clearfix { *zoom: 1;}.clearfix:before,.clearfix:after { display: table; content: "";}.clearfix:after { clear: both;}.hide-text { font: 0/0 a; color: transparent; text-shadow: none; background-color: transparent; border: 0;}.input-block-level { display: block; width: 100%; min-height: 28px; -webkit-box-sizing: border-box; -moz-box-sizing: border-box; -ms-box-sizing: border-box; box-sizing: border-box;}article,aside,details,figcaption,figure,footer,header,hgroup,nav,section { display: block;}audio,canvas,video { display: inline-block; *display: inline; *zoom: 1;}audio:not([controls]) { display: none;}html { font-size: 100%; -webkit-text-size-adjust: 100%; -ms-text-size-adjust: 100%;}a:focus { outline: thin dotted #333; outline: 5px auto -webkit-focus-ring-color; outline-offset: -2px;}a:hover,a:active { outline: 0;}sub,sup { position: relative; font-size: 75%; line-height: 0; vertical-align: baseline;}sup { top: -0.5em;}sub { bottom: -0.25em;}img { max-width: 100%; vertical-align: middle; border: 0; -ms-interpolation-mode: bicubic;}#map_canvas img { max-width: none;}button,input,select,textarea { margin: 0; font-size: 100%; vertical-align: middle;}button,input { *overflow: visible; line-height: normal;}button::-moz-focus-inner,input::-moz-focus-inner { padding: 0; border: 0;}button,input[type="button"],input[type="reset"],input[type="submit"] { cursor: pointer; -webkit-appearance: button;}input[type="search"] { -webkit-box-sizing: content-box; -moz-box-sizing: content-box; box-sizing: content-box; -webkit-appearance: textfield;}input[type="search"]::-webkit-search-decoration,input[type="search"]::-webkit-search-cancel-button { -webkit-appearance: none;}textarea { overflow: auto; vertical-align: top;}body { margin: 0; font-family: "Helvetica Neue", Helvetica, Arial, sans-serif; font-size: 13px; line-height: 18px; color: #333333; background-color: #ffffff;}a { color: #0088cc; text-decoration: none;}a:hover { color: #005580; text-decoration: underline;}.row { margin-left: -20px; *zoom: 1;}.row:before,.row:after { display: table; content: "";}.row:after { clear: both;}[class*="span"] { float: left; margin-left: 20px;}.container,.navbar-fixed-top .container,.navbar-fixed-bottom .container { width: 940px;}.span12 { width: 940px;}.span11 { width: 860px;}.span10 { width: 780px;}.span9 { width: 700px;}.span8 { width: 620px;}.span7 { width: 540px;}.span6 { width: 460px;}.span5 { width: 380px;}.span4 { width: 300px;}.span3 { width: 220px;}.span2 { width: 140px;}.span1 { width: 60px;}.offset12 { margin-left: 980px;}.offset11 { margin-left: 900px;}.offset10 { margin-left: 820px;}.offset9 { margin-left: 740px;}.offset8 { margin-left: 660px;}.offset7 { margin-left: 580px;}.offset6 { margin-left: 500px;}.offset5 { margin-left: 420px;}.offset4 { margin-left: 340px;}.offset3 { margin-left: 260px;}.offset2 { margin-left: 180px;}.offset1 { margin-left: 100px;}.row-fluid { width: 100%; *zoom: 1;}.row-fluid:before,.row-fluid:after { display: table; content: "";}.row-fluid:after { clear: both;}.row-fluid [class*="span"] { display: block; width: 100%; min-height: 28px; -webkit-box-sizing: border-box; -moz-box-sizing: border-box; -ms-box-sizing: border-box; box-sizing: border-box; float: left; margin-left: 2.127659574%; *margin-left: 2.0744680846382977%;}.row-fluid [class*="span"]:first-child { margin-left: 0;}.row-fluid .span12 { width: 99.99999998999999%; *width: 99.94680850063828%;}.row-fluid .span11 { width: 91.489361693%; *width: 91.4361702036383%;}.row-fluid .span10 { width: 82.97872339599999%; *width: 82.92553190663828%;}.row-fluid .span9 { width: 74.468085099%; *width: 74.4148936096383%;}.row-fluid .span8 { width: 65.95744680199999%; *width: 65.90425531263828%;}.row-fluid .span7 { width: 57.446808505%; *width: 57.3936170156383%;}.row-fluid .span6 { width: 48.93617020799999%; *width: 48.88297871863829%;}.row-fluid .span5 { width: 40.425531911%; *width: 40.3723404216383%;}.row-fluid .span4 { width: 31.914893614%; *width: 31.8617021246383%;}.row-fluid .span3 { width: 23.404255317%; *width: 23.3510638276383%;}.row-fluid .span2 { width: 14.89361702%; *width: 14.8404255306383%;}.row-fluid .span1 { width: 6.382978723%; *width: 6.329787233638298%;}.container { margin-right: auto; margin-left: auto; *zoom: 1;}.container:before,.container:after { display: table; content: "";}.container:after { clear: both;}.container-fluid { padding-right: 20px; padding-left: 20px; *zoom: 1;}.container-fluid:before,.container-fluid:after { display: table; content: "";}.container-fluid:after { clear: both;}p { margin: 0 0 9px;}p small { font-size: 11px; color: #999999;}.lead { margin-bottom: 18px; font-size: 20px; font-weight: 200; line-height: 27px;}h1,h2,h3,h4,h5,h6 { margin: 0; font-family: inherit; font-weight: bold; color: inherit; text-rendering: optimizelegibility;}h1 small,h2 small,h3 small,h4 small,h5 small,h6 small { font-weight: normal; color: #999999;}h1 { font-size: 30px; line-height: 36px;}h1 small { font-size: 18px;}h2 { font-size: 24px; line-height: 36px;}h2 small { font-size: 18px;}h3 { font-size: 18px; line-height: 27px;}h3 small { font-size: 14px;}h4,h5,h6 { line-height: 18px;}h4 { font-size: 14px;}h4 small { font-size: 12px;}h5 { font-size: 12px;}h6 { font-size: 11px; color: #999999; text-transform: uppercase;}.page-header { padding-bottom: 17px; margin: 18px 0; border-bottom: 1px solid #eeeeee;}.page-header h1 { line-height: 1;}ul,ol { padding: 0; margin: 0 0 9px 25px;}ul ul,ul ol,ol ol,ol ul { margin-bottom: 0;}ul { list-style: disc;}ol { list-style: decimal;}li { line-height: 18px;}ul.unstyled,ol.unstyled { margin-left: 0; list-style: none;}dl { margin-bottom: 18px;}dt,dd { line-height: 18px;}dt { font-weight: bold; line-height: 17px;}dd { margin-left: 9px;}.dl-horizontal dt { float: left; width: 120px; clear: left; text-align: right; overflow: hidden; text-overflow: ellipsis; white-space: nowrap;}.dl-horizontal dd { margin-left: 130px;}hr { margin: 18px 0; border: 0; border-top: 1px solid #eeeeee; border-bottom: 1px solid #ffffff;}strong { font-weight: bold;}em { font-style: italic;}.muted { color: #999999;}abbr[title] { cursor: help; border-bottom: 1px dotted #999999;}abbr.initialism { font-size: 90%; text-transform: uppercase;}blockquote { padding: 0 0 0 15px; margin: 0 0 18px; border-left: 5px solid #eeeeee;}blockquote p { margin-bottom: 0; font-size: 16px; font-weight: 300; line-height: 22.5px;}blockquote small { display: block; line-height: 18px; color: #999999;}blockquote small:before { content: '\2014 \00A0';}blockquote.pull-right { float: right; padding-right: 15px; padding-left: 0; border-right: 5px solid #eeeeee; border-left: 0;}blockquote.pull-right p,blockquote.pull-right small { text-align: right;}q:before,q:after,blockquote:before,blockquote:after { content: "";}address { display: block; margin-bottom: 18px; font-style: normal; line-height: 18px;}small { font-size: 100%;}cite { font-style: normal;}code,pre { padding: 0 3px 2px; font-family: Menlo, Monaco, Consolas, "Courier New", monospace; font-size: 12px; color: #333333; -webkit-border-radius: 3px; -moz-border-radius: 3px; border-radius: 3px;}code { padding: 2px 4px; color: #d14; background-color: #f7f7f9; border: 1px solid #e1e1e8;}pre { display: block; padding: 8.5px; margin: 0 0 9px; font-size: 12.025px; line-height: 18px; word-break: break-all; word-wrap: break-word; white-space: pre; white-space: pre-wrap; background-color: #f5f5f5; border: 1px solid #ccc; border: 1px solid rgba(0, 0, 0, 0.15); -webkit-border-radius: 4px; -moz-border-radius: 4px; border-radius: 4px;}pre.prettyprint { margin-bottom: 18px;}pre code { padding: 0; color: inherit; background-color: transparent; border: 0;}.pre-scrollable { max-height: 340px; overflow-y: scroll;}.label,.badge { font-size: 10.998px; font-weight: bold; line-height: 14px; color: #ffffff; vertical-align: baseline; white-space: nowrap; text-shadow: 0 -1px 0 rgba(0, 0, 0, 0.25); background-color: #999999;}.label { padding: 1px 4px 2px; -webkit-border-radius: 3px; -moz-border-radius: 3px; border-radius: 3px;}.badge { padding: 1px 9px 2px; -webkit-border-radius: 9px; -moz-border-radius: 9px; border-radius: 9px;}a.label:hover,a.badge:hover { color: #ffffff; text-decoration: none; cursor: pointer;}.label-important,.badge-important { background-color: #b94a48;}.label-important[href],.badge-important[href] { background-color: #953b39;}.label-warning,.badge-warning { background-color: #f89406;}.label-warning[href],.badge-warning[href] { background-color: #c67605;}.label-success,.badge-success { background-color: #468847;}.label-success[href],.badge-success[href] { background-color: #356635;}.label-info,.badge-info { background-color: #3a87ad;}.label-info[href],.badge-info[href] { background-color: #2d6987;}.label-inverse,.badge-inverse { background-color: #333333;}.label-inverse[href],.badge-inverse[href] { background-color: #1a1a1a;}table { max-width: 100%; background-color: transparent; border-collapse: collapse; border-spacing: 0;}.table { width: 100%; margin-bottom: 18px;}.table th,.table td { padding: 8px; line-height: 18px; text-align: left; vertical-align: top; border-top: 1px solid #dddddd;}.table th { font-weight: bold;}.table thead th { vertical-align: bottom;}.table caption + thead tr:first-child th,.table caption + thead tr:first-child td,.table colgroup + thead tr:first-child th,.table colgroup + thead tr:first-child td,.table thead:first-child tr:first-child th,.table thead:first-child tr:first-child td { border-top: 0;}.table tbody + tbody { border-top: 2px solid #dddddd;}.table-condensed th,.table-condensed td { padding: 4px 5px;}.table-bordered { border: 1px solid #dddddd; border-collapse: separate; *border-collapse: collapsed; border-left: 0; -webkit-border-radius: 4px; -moz-border-radius: 4px; border-radius: 4px;}.table-bordered th,.table-bordered td { border-left: 1px solid #dddddd;}.table-bordered caption + thead tr:first-child th,.table-bordered caption + tbody tr:first-child th,.table-bordered caption + tbody tr:first-child td,.table-bordered colgroup + thead tr:first-child th,.table-bordered colgroup + tbody tr:first-child th,.table-bordered colgroup + tbody tr:first-child td,.table-bordered thead:first-child tr:first-child th,.table-bordered tbody:first-child tr:first-child th,.table-bordered tbody:first-child tr:first-child td { border-top: 0;}.table-bordered thead:first-child tr:first-child th:first-child,.table-bordered tbody:first-child tr:first-child td:first-child { -webkit-border-top-left-radius: 4px; border-top-left-radius: 4px; -moz-border-radius-topleft: 4px;}.table-bordered thead:first-child tr:first-child th:last-child,.table-bordered tbody:first-child tr:first-child td:last-child { -webkit-border-top-right-radius: 4px; border-top-right-radius: 4px; -moz-border-radius-topright: 4px;}.table-bordered thead:last-child tr:last-child th:first-child,.table-bordered tbody:last-child tr:last-child td:first-child { -webkit-border-radius: 0 0 0 4px; -moz-border-radius: 0 0 0 4px; border-radius: 0 0 0 4px; -webkit-border-bottom-left-radius: 4px; border-bottom-left-radius: 4px; -moz-border-radius-bottomleft: 4px;}.table-bordered thead:last-child tr:last-child th:last-child,.table-bordered tbody:last-child tr:last-child td:last-child { -webkit-border-bottom-right-radius: 4px; border-bottom-right-radius: 4px; -moz-border-radius-bottomright: 4px;}.table-striped tbody tr:nth-child(odd) td,.table-striped tbody tr:nth-child(odd) th { background-color: #f9f9f9;}.table tbody tr:hover td,.table tbody tr:hover th { background-color: #f5f5f5;}table .span1 { float: none; width: 44px; margin-left: 0;}table .span2 { float: none; width: 124px; margin-left: 0;}table .span3 { float: none; width: 204px; margin-left: 0;}table .span4 { float: none; width: 284px; margin-left: 0;}table .span5 { float: none; width: 364px; margin-left: 0;}table .span6 { float: none; width: 444px; margin-left: 0;}table .span7 { float: none; width: 524px; margin-left: 0;}table .span8 { float: none; width: 604px; margin-left: 0;}table .span9 { float: none; width: 684px; margin-left: 0;}table .span10 { float: none; width: 764px; margin-left: 0;}table .span11 { float: none; width: 844px; margin-left: 0;}table .span12 { float: none; width: 924px; margin-left: 0;}table .span13 { float: none; width: 1004px; margin-left: 0;}table .span14 { float: none; width: 1084px; margin-left: 0;}table .span15 { float: none; width: 1164px; margin-left: 0;}table .span16 { float: none; width: 1244px; margin-left: 0;}table .span17 { float: none; width: 1324px; margin-left: 0;}table .span18 { float: none; width: 1404px; margin-left: 0;}table .span19 { float: none; width: 1484px; margin-left: 0;}table .span20 { float: none; width: 1564px; margin-left: 0;}table .span21 { float: none; width: 1644px; margin-left: 0;}table .span22 { float: none; width: 1724px; margin-left: 0;}table .span23 { float: none; width: 1804px; margin-left: 0;}table .span24 { float: none; width: 1884px; margin-left: 0;}form { margin: 0 0 18px;}fieldset { padding: 0; margin: 0; border: 0;}legend { display: block; width: 100%; padding: 0; margin-bottom: 27px; font-size: 19.5px; line-height: 36px; color: #333333; border: 0; border-bottom: 1px solid #e5e5e5;}legend small { font-size: 13.5px; color: #999999;}.control-group .controls { label, input, button, select, textarea { font-size: 13px; font-weight: normal; line-height: 18px; }}.control-group .controls { input, button, select, textarea { font-family: "Helvetica Neue", Helvetica, Arial, sans-serif; }}label { display: block; margin-bottom: 5px;}.control-group .controls { select, textarea, input[type="text"], input[type="password"], input[type="datetime"], input[type="datetime-local"], input[type="date"], input[type="month"], input[type="time"], input[type="week"], input[type="number"], input[type="email"], input[type="url"], input[type="search"], input[type="tel"], input[type="color"], .uneditable-input { display: inline-block; height: 18px; padding: 4px; margin-bottom: 9px; font-size: 13px; line-height: 18px; color: #555555; }}.control-group .controls { input, textarea { width: 210px; }}.control-group .controls { textarea { height: auto; }}.control-group .controls { textarea, input[type="text"], input[type="password"], input[type="datetime"], input[type="datetime-local"], input[type="date"], input[type="month"], input[type="time"], input[type="week"], input[type="number"], input[type="email"], input[type="url"], input[type="search"], input[type="tel"], input[type="color"], .uneditable-input { background-color: #ffffff; border: 1px solid #cccccc; -webkit-border-radius: 3px; -moz-border-radius: 3px; border-radius: 3px; -webkit-box-shadow: inset 0 1px 1px rgba(0, 0, 0, 0.075); -moz-box-shadow: inset 0 1px 1px rgba(0, 0, 0, 0.075); box-shadow: inset 0 1px 1px rgba(0, 0, 0, 0.075); -webkit-transition: border linear 0.2s, box-shadow linear 0.2s; -moz-transition: border linear 0.2s, box-shadow linear 0.2s; -ms-transition: border linear 0.2s, box-shadow linear 0.2s; -o-transition: border linear 0.2s, box-shadow linear 0.2s; transition: border linear 0.2s, box-shadow linear 0.2s; }}.control-group .controls { textarea:focus, input[type="text"]:focus, input[type="password"]:focus, input[type="datetime"]:focus, input[type="datetime-local"]:focus, input[type="date"]:focus, input[type="month"]:focus, input[type="time"]:focus, input[type="week"]:focus, input[type="number"]:focus, input[type="email"]:focus, input[type="url"]:focus, input[type="search"]:focus, input[type="tel"]:focus, input[type="color"]:focus, .uneditable-input:focus { border-color: rgba(82, 168, 236, 0.8); outline: 0; outline: thin dotted \9; /* IE6-9 */ -webkit-box-shadow: inset 0 1px 1px rgba(0,0,0,.075), 0 0 8px rgba(82,168,236,.6); -moz-box-shadow: inset 0 1px 1px rgba(0,0,0,.075), 0 0 8px rgba(82,168,236,.6); box-shadow: inset 0 1px 1px rgba(0,0,0,.075), 0 0 8px rgba(82,168,236,.6); }}.control-group .controls { input[type="radio"], input[type="checkbox"] { margin: 3px 0; *margin-top: 0; /* IE7 */ line-height: normal; cursor: pointer; }}.control-group .controls { input[type="submit"], input[type="reset"], input[type="button"], input[type="radio"], input[type="checkbox"] { width: auto; }}.uneditable-textarea { width: auto; height: auto;}.control-group .controls { select, input[type="file"] { height: 28px; /* In IE7, the height of the select element cannot be changed by height, only font-size */ *margin-top: 4px; /* For IE7, add top margin to align select with labels */ line-height: 28px; }}.control-group .controls { select { width: 220px; border: 1px solid #bbb; }}.control-group .controls { select[multiple], select[size] { height: auto; }}.control-group .controls { select:focus, input[type="file"]:focus, input[type="radio"]:focus, input[type="checkbox"]:focus { outline: thin dotted #333; outline: 5px auto -webkit-focus-ring-color; outline-offset: -2px; }}.radio,.checkbox { min-height: 18px; padding-left: 18px;}.radio input[type="radio"],.checkbox input[type="checkbox"] { float: left; margin-left: -18px;}.controls > .radio:first-child,.controls > .checkbox:first-child { padding-top: 5px;}.radio.inline,.checkbox.inline { display: inline-block; padding-top: 5px; margin-bottom: 0; vertical-align: middle;}.radio.inline + .radio.inline,.checkbox.inline + .checkbox.inline { margin-left: 10px;}.control-group .controls { .input-mini { width: 60px; }}.control-group .controls { .input-small { width: 90px; }}.control-group .controls { .input-medium { width: 150px; }}.control-group .controls { .input-large { width: 210px; }}.input-xlarge { .input-xlarge { width: 270px; }}.input-xxlarge { .input-xxlarge { width: 530px; }}.control-group .controls { input[class*="span"], select[class*="span"], textarea[class*="span"], .uneditable-input[class*="span"], .row-fluid input[class*="span"], .row-fluid select[class*="span"], .row-fluid textarea[class*="span"], .row-fluid .uneditable-input[class*="span"] { float: none; margin-left: 0; }}.input-append input[class*="span"],.input-append .uneditable-input[class*="span"],.input-prepend input[class*="span"],.input-prepend .uneditable-input[class*="span"],.row-fluid .input-prepend [class*="span"],.row-fluid .input-append [class*="span"] { display: inline-block;}.control-group .controls { input, textarea, .uneditable-input { margin-left: 0; }}input.span12, textarea.span12, .uneditable-input.span12 { width: 930px;}input.span11, textarea.span11, .uneditable-input.span11 { width: 850px;}input.span10, textarea.span10, .uneditable-input.span10 { width: 770px;}input.span9, textarea.span9, .uneditable-input.span9 { width: 690px;}input.span8, textarea.span8, .uneditable-input.span8 { width: 610px;}input.span7, textarea.span7, .uneditable-input.span7 { width: 530px;}input.span6, textarea.span6, .uneditable-input.span6 { width: 450px;}input.span5, textarea.span5, .uneditable-input.span5 { width: 370px;}input.span4, textarea.span4, .uneditable-input.span4 { width: 290px;}input.span3, textarea.span3, .uneditable-input.span3 { width: 210px;}input.span2, textarea.span2, .uneditable-input.span2 { width: 130px;}input.span1, textarea.span1, .uneditable-input.span1 { width: 50px;}input[disabled],select[disabled],textarea[disabled],input[readonly],select[readonly],textarea[readonly] { cursor: not-allowed; background-color: #eeeeee; border-color: #ddd;}input[type="radio"][disabled],input[type="checkbox"][disabled],input[type="radio"][readonly],input[type="checkbox"][readonly] { background-color: transparent;}.control-group.warning > label,.control-group.warning .help-block,.control-group.warning .help-inline { color: #c09853;}.control-group.warning .checkbox,.control-group.warning .radio,.control-group.warning input,.control-group.warning select,.control-group.warning textarea { color: #c09853; border-color: #c09853;}.control-group.warning .checkbox:focus,.control-group.warning .radio:focus,.control-group.warning input:focus,.control-group.warning select:focus,.control-group.warning textarea:focus { border-color: #a47e3c; -webkit-box-shadow: 0 0 6px #dbc59e; -moz-box-shadow: 0 0 6px #dbc59e; box-shadow: 0 0 6px #dbc59e;}.control-group.warning .input-prepend .add-on,.control-group.warning .input-append .add-on { color: #c09853; background-color: #fcf8e3; border-color: #c09853;}.control-group.error > label,.control-group.error .help-block,.control-group.error .help-inline { color: #b94a48;}.control-group.error .checkbox,.control-group.error .radio,.control-group.error input,.control-group.error select,.control-group.error textarea { color: #b94a48; border-color: #b94a48;}.control-group.error .checkbox:focus,.control-group.error .radio:focus,.control-group.error input:focus,.control-group.error select:focus,.control-group.error textarea:focus { border-color: #953b39; -webkit-box-shadow: 0 0 6px #d59392; -moz-box-shadow: 0 0 6px #d59392; box-shadow: 0 0 6px #d59392;}.control-group.error .input-prepend .add-on,.control-group.error .input-append .add-on { color: #b94a48; background-color: #f2dede; border-color: #b94a48;}.control-group.success > label,.control-group.success .help-block,.control-group.success .help-inline { color: #468847;}.control-group.success .checkbox,.control-group.success .radio,.control-group.success input,.control-group.success select,.control-group.success textarea { color: #468847; border-color: #468847;}.control-group.success .checkbox:focus,.control-group.success .radio:focus,.control-group.success input:focus,.control-group.success select:focus,.control-group.success textarea:focus { border-color: #356635; -webkit-box-shadow: 0 0 6px #7aba7b; -moz-box-shadow: 0 0 6px #7aba7b; box-shadow: 0 0 6px #7aba7b;}.control-group.success .input-prepend .add-on,.control-group.success .input-append .add-on { color: #468847; background-color: #dff0d8; border-color: #468847;}input:focus:required:invalid,textarea:focus:required:invalid,select:focus:required:invalid { color: #b94a48; border-color: #ee5f5b;}input:focus:required:invalid:focus,textarea:focus:required:invalid:focus,select:focus:required:invalid:focus { border-color: #e9322d; -webkit-box-shadow: 0 0 6px #f8b9b7; -moz-box-shadow: 0 0 6px #f8b9b7; box-shadow: 0 0 6px #f8b9b7;}.form-actions { padding: 17px 20px 18px; margin-top: 18px; margin-bottom: 18px; background-color: #f5f5f5; border-top: 1px solid #e5e5e5; *zoom: 1;}.form-actions:before,.form-actions:after { display: table; content: "";}.form-actions:after { clear: both;}.uneditable-input { overflow: hidden; white-space: nowrap; cursor: not-allowed; background-color: #ffffff; border-color: #eee; -webkit-box-shadow: inset 0 1px 2px rgba(0, 0, 0, 0.025); -moz-box-shadow: inset 0 1px 2px rgba(0, 0, 0, 0.025); box-shadow: inset 0 1px 2px rgba(0, 0, 0, 0.025);}:-moz-placeholder { color: #999999;}:-ms-input-placeholder { color: #999999;}::-webkit-input-placeholder { color: #999999;}.help-block,.help-inline { color: #555555;}.help-block { display: block; margin-bottom: 9px;}.help-inline { display: inline-block; *display: inline; /* IE7 inline-block hack */ *zoom: 1; vertical-align: middle; padding-left: 5px;}.input-prepend,.input-append { margin-bottom: 5px;}.input-prepend input,.input-append input,.input-prepend select,.input-append select,.input-prepend .uneditable-input,.input-append .uneditable-input { position: relative; margin-bottom: 0; *margin-left: 0; vertical-align: middle; -webkit-border-radius: 0 3px 3px 0; -moz-border-radius: 0 3px 3px 0; border-radius: 0 3px 3px 0;}.input-prepend input:focus,.input-append input:focus,.input-prepend select:focus,.input-append select:focus,.input-prepend .uneditable-input:focus,.input-append .uneditable-input:focus { z-index: 2;}.input-prepend .uneditable-input,.input-append .uneditable-input { border-left-color: #ccc;}.input-prepend .add-on,.input-append .add-on { display: inline-block; width: auto; height: 18px; min-width: 16px; padding: 4px 5px; font-weight: normal; line-height: 18px; text-align: center; text-shadow: 0 1px 0 #ffffff; vertical-align: middle; background-color: #eeeeee; border: 1px solid #ccc;}.input-prepend .add-on,.input-append .add-on,.input-prepend .btn,.input-append .btn { margin-left: -1px; -webkit-border-radius: 0; -moz-border-radius: 0; border-radius: 0;}.input-prepend .active,.input-append .active { background-color: #a9dba9; border-color: #46a546;}.input-prepend .add-on,.input-prepend .btn { margin-right: -1px;}.input-prepend .add-on:first-child,.input-prepend .btn:first-child { -webkit-border-radius: 3px 0 0 3px; -moz-border-radius: 3px 0 0 3px; border-radius: 3px 0 0 3px;}.input-append input,.input-append select,.input-append .uneditable-input { -webkit-border-radius: 3px 0 0 3px; -moz-border-radius: 3px 0 0 3px; border-radius: 3px 0 0 3px;}.input-append .uneditable-input { border-right-color: #ccc; border-left-color: #eee;}.input-append .add-on:last-child,.input-append .btn:last-child { -webkit-border-radius: 0 3px 3px 0; -moz-border-radius: 0 3px 3px 0; border-radius: 0 3px 3px 0;}.input-prepend.input-append input,.input-prepend.input-append select,.input-prepend.input-append .uneditable-input { -webkit-border-radius: 0; -moz-border-radius: 0; border-radius: 0;}.input-prepend.input-append .add-on:first-child,.input-prepend.input-append .btn:first-child { margin-right: -1px; -webkit-border-radius: 3px 0 0 3px; -moz-border-radius: 3px 0 0 3px; border-radius: 3px 0 0 3px;}.input-prepend.input-append .add-on:last-child,.input-prepend.input-append .btn:last-child { margin-left: -1px; -webkit-border-radius: 0 3px 3px 0; -moz-border-radius: 0 3px 3px 0; border-radius: 0 3px 3px 0;}.search-query { padding-right: 14px; padding-right: 4px \9; padding-left: 14px; padding-left: 4px \9; /* IE7-8 doesn't have border-radius, so don't indent the padding */ margin-bottom: 0; -webkit-border-radius: 14px; -moz-border-radius: 14px; border-radius: 14px;}.form-search input,.form-inline input,.form-horizontal input,.form-search textarea,.form-inline textarea,.form-horizontal textarea,.form-search select,.form-inline select,.form-horizontal select,.form-search .help-inline,.form-inline .help-inline,.form-horizontal .help-inline,.form-search .uneditable-input,.form-inline .uneditable-input,.form-horizontal .uneditable-input,.form-search .input-prepend,.form-inline .input-prepend,.form-horizontal .input-prepend,.form-search .input-append,.form-inline .input-append,.form-horizontal .input-append { display: inline-block; *display: inline; /* IE7 inline-block hack */ *zoom: 1; margin-bottom: 0;}.form-search .hide,.form-inline .hide,.form-horizontal .hide { display: none;}.form-search label,.form-inline label { display: inline-block;}.form-search .input-append,.form-inline .input-append,.form-search .input-prepend,.form-inline .input-prepend { margin-bottom: 0;}.form-search .radio,.form-search .checkbox,.form-inline .radio,.form-inline .checkbox { padding-left: 0; margin-bottom: 0; vertical-align: middle;}.form-search .radio input[type="radio"],.form-search .checkbox input[type="checkbox"],.form-inline .radio input[type="radio"],.form-inline .checkbox input[type="checkbox"] { float: left; margin-right: 3px; margin-left: 0;}.control-group { margin-bottom: 9px;}legend + .control-group { margin-top: 18px; -webkit-margin-top-collapse: separate;}.form-horizontal .control-group { margin-bottom: 18px; *zoom: 1;}.form-horizontal .control-group:before,.form-horizontal .control-group:after { display: table; content: "";}.form-horizontal .control-group:after { clear: both;}.form-horizontal .control-label { float: left; width: 140px; padding-top: 5px; text-align: right;}.form-horizontal .controls { *display: inline-block; *padding-left: 20px; margin-left: 160px; *margin-left: 0;}.form-horizontal .controls:first-child { *padding-left: 160px;}.form-horizontal .help-block { margin-top: 9px; margin-bottom: 0;}.form-horizontal .form-actions { padding-left: 160px;}.btn { display: inline-block; *display: inline; /* IE7 inline-block hack */ *zoom: 1; padding: 4px 10px 4px; margin-bottom: 0; font-size: 13px; line-height: 18px; *line-height: 20px; color: #333333; text-align: center; text-shadow: 0 1px 1px rgba(255, 255, 255, 0.75); vertical-align: middle; cursor: pointer; background-color: #f5f5f5; background-image: -moz-linear-gradient(top, #ffffff, #e6e6e6); background-image: -ms-linear-gradient(top, #ffffff, #e6e6e6); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#ffffff), to(#e6e6e6)); background-image: -webkit-linear-gradient(top, #ffffff, #e6e6e6); background-image: -o-linear-gradient(top, #ffffff, #e6e6e6); background-image: linear-gradient(top, #ffffff, #e6e6e6); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#ffffff', endColorstr='#e6e6e6', GradientType=0); border-color: #e6e6e6 #e6e6e6 #bfbfbf; border-color: rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.25); *background-color: #e6e6e6; /* Darken IE7 buttons by default so they stand out more given they won't have borders */ filter: progid:DXImageTransform.Microsoft.gradient(enabled = false); border: 1px solid #cccccc; *border: 0; border-bottom-color: #b3b3b3; -webkit-border-radius: 4px; -moz-border-radius: 4px; border-radius: 4px; *margin-left: .3em; -webkit-box-shadow: inset 0 1px 0 rgba(255,255,255,.2), 0 1px 2px rgba(0,0,0,.05); -moz-box-shadow: inset 0 1px 0 rgba(255,255,255,.2), 0 1px 2px rgba(0,0,0,.05); box-shadow: inset 0 1px 0 rgba(255,255,255,.2), 0 1px 2px rgba(0,0,0,.05);}.btn:hover,.btn:active,.btn.active,.btn.disabled,.btn[disabled] { background-color: #e6e6e6; *background-color: #d9d9d9;}.btn:active,.btn.active { background-color: #cccccc \9;}.btn:first-child { *margin-left: 0;}.btn:hover { color: #333333; text-decoration: none; background-color: #e6e6e6; *background-color: #d9d9d9; /* Buttons in IE7 don't get borders, so darken on hover */ background-position: 0 -15px; -webkit-transition: background-position 0.1s linear; -moz-transition: background-position 0.1s linear; -ms-transition: background-position 0.1s linear; -o-transition: background-position 0.1s linear; transition: background-position 0.1s linear;}.btn:focus { outline: thin dotted #333; outline: 5px auto -webkit-focus-ring-color; outline-offset: -2px;}.btn.active,.btn:active { background-color: #e6e6e6; background-color: #d9d9d9 \9; background-image: none; outline: 0; -webkit-box-shadow: inset 0 2px 4px rgba(0,0,0,.15), 0 1px 2px rgba(0,0,0,.05); -moz-box-shadow: inset 0 2px 4px rgba(0,0,0,.15), 0 1px 2px rgba(0,0,0,.05); box-shadow: inset 0 2px 4px rgba(0,0,0,.15), 0 1px 2px rgba(0,0,0,.05);}.btn.disabled,.btn[disabled] { cursor: default; background-color: #e6e6e6; background-image: none; opacity: 0.65; filter: alpha(opacity=65); -webkit-box-shadow: none; -moz-box-shadow: none; box-shadow: none;}.btn-large { padding: 9px 14px; font-size: 15px; line-height: normal; -webkit-border-radius: 5px; -moz-border-radius: 5px; border-radius: 5px;}.btn-large [class^="icon-"] { margin-top: 1px;}.btn-small { padding: 5px 9px; font-size: 11px; line-height: 16px;}.btn-small [class^="icon-"] { margin-top: -1px;}.btn-mini { padding: 2px 6px; font-size: 11px; line-height: 14px;}.btn-primary,.btn-primary:hover,.btn-warning,.btn-warning:hover,.btn-danger,.btn-danger:hover,.btn-success,.btn-success:hover,.btn-info,.btn-info:hover,.btn-inverse,.btn-inverse:hover { color: #ffffff; text-shadow: 0 -1px 0 rgba(0, 0, 0, 0.25);}.btn-primary.active,.btn-warning.active,.btn-danger.active,.btn-success.active,.btn-info.active,.btn-inverse.active { color: rgba(255, 255, 255, 0.75);}.btn { border-color: #ccc; border-color: rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.25);}.btn-primary { background-color: #0074cc; background-image: -moz-linear-gradient(top, #0088cc, #0055cc); background-image: -ms-linear-gradient(top, #0088cc, #0055cc); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#0088cc), to(#0055cc)); background-image: -webkit-linear-gradient(top, #0088cc, #0055cc); background-image: -o-linear-gradient(top, #0088cc, #0055cc); background-image: linear-gradient(top, #0088cc, #0055cc); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#0088cc', endColorstr='#0055cc', GradientType=0); border-color: #0055cc #0055cc #003580; border-color: rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.25); *background-color: #0055cc; /* Darken IE7 buttons by default so they stand out more given they won't have borders */ filter: progid:DXImageTransform.Microsoft.gradient(enabled = false);}.btn-primary:hover,.btn-primary:active,.btn-primary.active,.btn-primary.disabled,.btn-primary[disabled] { background-color: #0055cc; *background-color: #004ab3;}.btn-primary:active,.btn-primary.active { background-color: #004099 \9;}.btn-warning { background-color: #faa732; background-image: -moz-linear-gradient(top, #fbb450, #f89406); background-image: -ms-linear-gradient(top, #fbb450, #f89406); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#fbb450), to(#f89406)); background-image: -webkit-linear-gradient(top, #fbb450, #f89406); background-image: -o-linear-gradient(top, #fbb450, #f89406); background-image: linear-gradient(top, #fbb450, #f89406); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#fbb450', endColorstr='#f89406', GradientType=0); border-color: #f89406 #f89406 #ad6704; border-color: rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.25); *background-color: #f89406; /* Darken IE7 buttons by default so they stand out more given they won't have borders */ filter: progid:DXImageTransform.Microsoft.gradient(enabled = false);}.btn-warning:hover,.btn-warning:active,.btn-warning.active,.btn-warning.disabled,.btn-warning[disabled] { background-color: #f89406; *background-color: #df8505;}.btn-warning:active,.btn-warning.active { background-color: #c67605 \9;}.btn-danger { background-color: #da4f49; background-image: -moz-linear-gradient(top, #ee5f5b, #bd362f); background-image: -ms-linear-gradient(top, #ee5f5b, #bd362f); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#ee5f5b), to(#bd362f)); background-image: -webkit-linear-gradient(top, #ee5f5b, #bd362f); background-image: -o-linear-gradient(top, #ee5f5b, #bd362f); background-image: linear-gradient(top, #ee5f5b, #bd362f); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#ee5f5b', endColorstr='#bd362f', GradientType=0); border-color: #bd362f #bd362f #802420; border-color: rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.25); *background-color: #bd362f; /* Darken IE7 buttons by default so they stand out more given they won't have borders */ filter: progid:DXImageTransform.Microsoft.gradient(enabled = false);}.btn-danger:hover,.btn-danger:active,.btn-danger.active,.btn-danger.disabled,.btn-danger[disabled] { background-color: #bd362f; *background-color: #a9302a;}.btn-danger:active,.btn-danger.active { background-color: #942a25 \9;}.btn-success { background-color: #5bb75b; background-image: -moz-linear-gradient(top, #62c462, #51a351); background-image: -ms-linear-gradient(top, #62c462, #51a351); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#62c462), to(#51a351)); background-image: -webkit-linear-gradient(top, #62c462, #51a351); background-image: -o-linear-gradient(top, #62c462, #51a351); background-image: linear-gradient(top, #62c462, #51a351); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#62c462', endColorstr='#51a351', GradientType=0); border-color: #51a351 #51a351 #387038; border-color: rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.25); *background-color: #51a351; /* Darken IE7 buttons by default so they stand out more given they won't have borders */ filter: progid:DXImageTransform.Microsoft.gradient(enabled = false);}.btn-success:hover,.btn-success:active,.btn-success.active,.btn-success.disabled,.btn-success[disabled] { background-color: #51a351; *background-color: #499249;}.btn-success:active,.btn-success.active { background-color: #408140 \9;}.btn-info { background-color: #49afcd; background-image: -moz-linear-gradient(top, #5bc0de, #2f96b4); background-image: -ms-linear-gradient(top, #5bc0de, #2f96b4); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#5bc0de), to(#2f96b4)); background-image: -webkit-linear-gradient(top, #5bc0de, #2f96b4); background-image: -o-linear-gradient(top, #5bc0de, #2f96b4); background-image: linear-gradient(top, #5bc0de, #2f96b4); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#5bc0de', endColorstr='#2f96b4', GradientType=0); border-color: #2f96b4 #2f96b4 #1f6377; border-color: rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.25); *background-color: #2f96b4; /* Darken IE7 buttons by default so they stand out more given they won't have borders */ filter: progid:DXImageTransform.Microsoft.gradient(enabled = false);}.btn-info:hover,.btn-info:active,.btn-info.active,.btn-info.disabled,.btn-info[disabled] { background-color: #2f96b4; *background-color: #2a85a0;}.btn-info:active,.btn-info.active { background-color: #24748c \9;}.btn-inverse { background-color: #414141; background-image: -moz-linear-gradient(top, #555555, #222222); background-image: -ms-linear-gradient(top, #555555, #222222); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#555555), to(#222222)); background-image: -webkit-linear-gradient(top, #555555, #222222); background-image: -o-linear-gradient(top, #555555, #222222); background-image: linear-gradient(top, #555555, #222222); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#555555', endColorstr='#222222', GradientType=0); border-color: #222222 #222222 #000000; border-color: rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.25); *background-color: #222222; /* Darken IE7 buttons by default so they stand out more given they won't have borders */ filter: progid:DXImageTransform.Microsoft.gradient(enabled = false);}.btn-inverse:hover,.btn-inverse:active,.btn-inverse.active,.btn-inverse.disabled,.btn-inverse[disabled] { background-color: #222222; *background-color: #151515;}.btn-inverse:active,.btn-inverse.active { background-color: #080808 \9;}button.btn,input[type="submit"].btn { *padding-top: 2px; *padding-bottom: 2px;}button.btn::-moz-focus-inner,input[type="submit"].btn::-moz-focus-inner { padding: 0; border: 0;}button.btn.btn-large,input[type="submit"].btn.btn-large { *padding-top: 7px; *padding-bottom: 7px;}button.btn.btn-small,input[type="submit"].btn.btn-small { *padding-top: 3px; *padding-bottom: 3px;}button.btn.btn-mini,input[type="submit"].btn.btn-mini { *padding-top: 1px; *padding-bottom: 1px;}.btn-group { position: relative; *zoom: 1; *margin-left: .3em;}.btn-group:before,.btn-group:after { display: table; content: "";}.btn-group:after { clear: both;}.btn-group:first-child { *margin-left: 0;}.btn-group + .btn-group { margin-left: 5px;}.btn-toolbar { margin-top: 9px; margin-bottom: 9px;}.btn-toolbar .btn-group { display: inline-block; *display: inline; /* IE7 inline-block hack */ *zoom: 1;}.btn-group > .btn { position: relative; float: left; margin-left: -1px; -webkit-border-radius: 0; -moz-border-radius: 0; border-radius: 0;}.btn-group > .btn:first-child { margin-left: 0; -webkit-border-top-left-radius: 4px; -moz-border-radius-topleft: 4px; border-top-left-radius: 4px; -webkit-border-bottom-left-radius: 4px; -moz-border-radius-bottomleft: 4px; border-bottom-left-radius: 4px;}.btn-group > .btn:last-child,.btn-group > .dropdown-toggle { -webkit-border-top-right-radius: 4px; -moz-border-radius-topright: 4px; border-top-right-radius: 4px; -webkit-border-bottom-right-radius: 4px; -moz-border-radius-bottomright: 4px; border-bottom-right-radius: 4px;}.btn-group > .btn.large:first-child { margin-left: 0; -webkit-border-top-left-radius: 6px; -moz-border-radius-topleft: 6px; border-top-left-radius: 6px; -webkit-border-bottom-left-radius: 6px; -moz-border-radius-bottomleft: 6px; border-bottom-left-radius: 6px;}.btn-group > .btn.large:last-child,.btn-group > .large.dropdown-toggle { -webkit-border-top-right-radius: 6px; -moz-border-radius-topright: 6px; border-top-right-radius: 6px; -webkit-border-bottom-right-radius: 6px; -moz-border-radius-bottomright: 6px; border-bottom-right-radius: 6px;}.btn-group > .btn:hover,.btn-group > .btn:focus,.btn-group > .btn:active,.btn-group > .btn.active { z-index: 2;}.btn-group .dropdown-toggle:active,.btn-group.open .dropdown-toggle { outline: 0;}.btn-group > .dropdown-toggle { padding-left: 8px; padding-right: 8px; -webkit-box-shadow: inset 1px 0 0 rgba(255,255,255,.125), inset 0 1px 0 rgba(255,255,255,.2), 0 1px 2px rgba(0,0,0,.05); -moz-box-shadow: inset 1px 0 0 rgba(255,255,255,.125), inset 0 1px 0 rgba(255,255,255,.2), 0 1px 2px rgba(0,0,0,.05); box-shadow: inset 1px 0 0 rgba(255,255,255,.125), inset 0 1px 0 rgba(255,255,255,.2), 0 1px 2px rgba(0,0,0,.05); *padding-top: 4px; *padding-bottom: 4px;}.btn-group > .btn-mini.dropdown-toggle { padding-left: 5px; padding-right: 5px;}.btn-group > .btn-small.dropdown-toggle { *padding-top: 4px; *padding-bottom: 4px;}.btn-group > .btn-large.dropdown-toggle { padding-left: 12px; padding-right: 12px;}.btn-group.open .dropdown-toggle { background-image: none; -webkit-box-shadow: inset 0 2px 4px rgba(0,0,0,.15), 0 1px 2px rgba(0,0,0,.05); -moz-box-shadow: inset 0 2px 4px rgba(0,0,0,.15), 0 1px 2px rgba(0,0,0,.05); box-shadow: inset 0 2px 4px rgba(0,0,0,.15), 0 1px 2px rgba(0,0,0,.05);}.btn-group.open .btn.dropdown-toggle { background-color: #e6e6e6;}.btn-group.open .btn-primary.dropdown-toggle { background-color: #0055cc;}.btn-group.open .btn-warning.dropdown-toggle { background-color: #f89406;}.btn-group.open .btn-danger.dropdown-toggle { background-color: #bd362f;}.btn-group.open .btn-success.dropdown-toggle { background-color: #51a351;}.btn-group.open .btn-info.dropdown-toggle { background-color: #2f96b4;}.btn-group.open .btn-inverse.dropdown-toggle { background-color: #222222;}.btn .caret { margin-top: 7px; margin-left: 0;}.btn:hover .caret,.open.btn-group .caret { opacity: 1; filter: alpha(opacity=100);}.btn-mini .caret { margin-top: 5px;}.btn-small .caret { margin-top: 6px;}.btn-large .caret { margin-top: 6px; border-left-width: 5px; border-right-width: 5px; border-top-width: 5px;}.dropup .btn-large .caret { border-bottom: 5px solid #000000; border-top: 0;}.btn-primary .caret,.btn-warning .caret,.btn-danger .caret,.btn-info .caret,.btn-success .caret,.btn-inverse .caret { border-top-color: #ffffff; border-bottom-color: #ffffff; opacity: 0.75; filter: alpha(opacity=75);}.nav { margin-left: 0; margin-bottom: 18px; list-style: none;}.nav > li > a { display: block;}.nav > li > a:hover { text-decoration: none; background-color: #eeeeee;}.nav > .pull-right { float: right;}.nav .nav-header { display: block; padding: 3px 15px; font-size: 11px; font-weight: bold; line-height: 18px; color: #999999; text-shadow: 0 1px 0 rgba(255, 255, 255, 0.5); text-transform: uppercase;}.nav li + .nav-header { margin-top: 9px;}.nav-list { padding-left: 15px; padding-right: 15px; margin-bottom: 0;}.nav-list > li > a,.nav-list .nav-header { margin-left: -15px; margin-right: -15px; text-shadow: 0 1px 0 rgba(255, 255, 255, 0.5);}.nav-list > li > a { padding: 3px 15px;}.nav-list > .active > a,.nav-list > .active > a:hover { color: #ffffff; text-shadow: 0 -1px 0 rgba(0, 0, 0, 0.2); background-color: #0088cc;}.nav-list [class^="icon-"] { margin-right: 2px;}.nav-list .divider { *width: 100%; height: 1px; margin: 8px 1px; *margin: -5px 0 5px; overflow: hidden; background-color: #e5e5e5; border-bottom: 1px solid #ffffff;}.nav-tabs,.nav-pills { *zoom: 1;}.nav-tabs:before,.nav-pills:before,.nav-tabs:after,.nav-pills:after { display: table; content: "";}.nav-tabs:after,.nav-pills:after { clear: both;}.nav-tabs > li,.nav-pills > li { float: left;}.nav-tabs > li > a,.nav-pills > li > a { padding-right: 12px; padding-left: 12px; margin-right: 2px; line-height: 14px;}.nav-tabs { border-bottom: 1px solid #ddd;}.nav-tabs > li { margin-bottom: -1px;}.nav-tabs > li > a { padding-top: 8px; padding-bottom: 8px; line-height: 18px; border: 1px solid transparent; -webkit-border-radius: 4px 4px 0 0; -moz-border-radius: 4px 4px 0 0; border-radius: 4px 4px 0 0;}.nav-tabs > li > a:hover { border-color: #eeeeee #eeeeee #dddddd;}.nav-tabs > .active > a,.nav-tabs > .active > a:hover { color: #555555; background-color: #ffffff; border: 1px solid #ddd; border-bottom-color: transparent; cursor: default;}.nav-pills > li > a { padding-top: 8px; padding-bottom: 8px; margin-top: 2px; margin-bottom: 2px; -webkit-border-radius: 5px; -moz-border-radius: 5px; border-radius: 5px;}.nav-pills > .active > a,.nav-pills > .active > a:hover { color: #ffffff; background-color: #0088cc;}.nav-stacked > li { float: none;}.nav-stacked > li > a { margin-right: 0;}.nav-tabs.nav-stacked { border-bottom: 0;}.nav-tabs.nav-stacked > li > a { border: 1px solid #ddd; -webkit-border-radius: 0; -moz-border-radius: 0; border-radius: 0;}.nav-tabs.nav-stacked > li:first-child > a { -webkit-border-radius: 4px 4px 0 0; -moz-border-radius: 4px 4px 0 0; border-radius: 4px 4px 0 0;}.nav-tabs.nav-stacked > li:last-child > a { -webkit-border-radius: 0 0 4px 4px; -moz-border-radius: 0 0 4px 4px; border-radius: 0 0 4px 4px;}.nav-tabs.nav-stacked > li > a:hover { border-color: #ddd; z-index: 2;}.nav-pills.nav-stacked > li > a { margin-bottom: 3px;}.nav-pills.nav-stacked > li:last-child > a { margin-bottom: 1px;}.nav-tabs .dropdown-menu { -webkit-border-radius: 0 0 5px 5px; -moz-border-radius: 0 0 5px 5px; border-radius: 0 0 5px 5px;}.nav-pills .dropdown-menu { -webkit-border-radius: 4px; -moz-border-radius: 4px; border-radius: 4px;}.nav-tabs .dropdown-toggle .caret,.nav-pills .dropdown-toggle .caret { border-top-color: #0088cc; border-bottom-color: #0088cc; margin-top: 6px;}.nav-tabs .dropdown-toggle:hover .caret,.nav-pills .dropdown-toggle:hover .caret { border-top-color: #005580; border-bottom-color: #005580;}.nav-tabs .active .dropdown-toggle .caret,.nav-pills .active .dropdown-toggle .caret { border-top-color: #333333; border-bottom-color: #333333;}.nav > .dropdown.active > a:hover { color: #000000; cursor: pointer;}.nav-tabs .open .dropdown-toggle,.nav-pills .open .dropdown-toggle,.nav > li.dropdown.open.active > a:hover { color: #ffffff; background-color: #999999; border-color: #999999;}.nav li.dropdown.open .caret,.nav li.dropdown.open.active .caret,.nav li.dropdown.open a:hover .caret { border-top-color: #ffffff; border-bottom-color: #ffffff; opacity: 1; filter: alpha(opacity=100);}.tabs-stacked .open > a:hover { border-color: #999999;}.tabbable { *zoom: 1;}.tabbable:before,.tabbable:after { display: table; content: "";}.tabbable:after { clear: both;}.tab-content { overflow: auto;}.tabs-below > .nav-tabs,.tabs-right > .nav-tabs,.tabs-left > .nav-tabs { border-bottom: 0;}.tab-content > .tab-pane,.pill-content > .pill-pane { display: none;}.tab-content > .active,.pill-content > .active { display: block;}.tabs-below > .nav-tabs { border-top: 1px solid #ddd;}.tabs-below > .nav-tabs > li { margin-top: -1px; margin-bottom: 0;}.tabs-below > .nav-tabs > li > a { -webkit-border-radius: 0 0 4px 4px; -moz-border-radius: 0 0 4px 4px; border-radius: 0 0 4px 4px;}.tabs-below > .nav-tabs > li > a:hover { border-bottom-color: transparent; border-top-color: #ddd;}.tabs-below > .nav-tabs > .active > a,.tabs-below > .nav-tabs > .active > a:hover { border-color: transparent #ddd #ddd #ddd;}.tabs-left > .nav-tabs > li,.tabs-right > .nav-tabs > li { float: none;}.tabs-left > .nav-tabs > li > a,.tabs-right > .nav-tabs > li > a { min-width: 74px; margin-right: 0; margin-bottom: 3px;}.tabs-left > .nav-tabs { float: left; margin-right: 19px; border-right: 1px solid #ddd;}.tabs-left > .nav-tabs > li > a { margin-right: -1px; -webkit-border-radius: 4px 0 0 4px; -moz-border-radius: 4px 0 0 4px; border-radius: 4px 0 0 4px;}.tabs-left > .nav-tabs > li > a:hover { border-color: #eeeeee #dddddd #eeeeee #eeeeee;}.tabs-left > .nav-tabs .active > a,.tabs-left > .nav-tabs .active > a:hover { border-color: #ddd transparent #ddd #ddd; *border-right-color: #ffffff;}.tabs-right > .nav-tabs { float: right; margin-left: 19px; border-left: 1px solid #ddd;}.tabs-right > .nav-tabs > li > a { margin-left: -1px; -webkit-border-radius: 0 4px 4px 0; -moz-border-radius: 0 4px 4px 0; border-radius: 0 4px 4px 0;}.tabs-right > .nav-tabs > li > a:hover { border-color: #eeeeee #eeeeee #eeeeee #dddddd;}.tabs-right > .nav-tabs .active > a,.tabs-right > .nav-tabs .active > a:hover { border-color: #ddd #ddd #ddd transparent; *border-left-color: #ffffff;}.navbar { *position: relative; *z-index: 2; overflow: visible; margin-bottom: 18px;}.navbar-inner { min-height: 40px; padding-left: 20px; padding-right: 20px; background-color: #2c2c2c; background-image: -moz-linear-gradient(top, #333333, #222222); background-image: -ms-linear-gradient(top, #333333, #222222); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#333333), to(#222222)); background-image: -webkit-linear-gradient(top, #333333, #222222); background-image: -o-linear-gradient(top, #333333, #222222); background-image: linear-gradient(top, #333333, #222222); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#333333', endColorstr='#222222', GradientType=0); -webkit-border-radius: 4px; -moz-border-radius: 4px; border-radius: 4px; -webkit-box-shadow: 0 1px 3px rgba(0,0,0,.25), inset 0 -1px 0 rgba(0,0,0,.1); -moz-box-shadow: 0 1px 3px rgba(0,0,0,.25), inset 0 -1px 0 rgba(0,0,0,.1); box-shadow: 0 1px 3px rgba(0,0,0,.25), inset 0 -1px 0 rgba(0,0,0,.1);}.navbar .container { width: auto;}.nav-collapse.collapse { height: auto;}.navbar { color: #999999;}.navbar .brand:hover { text-decoration: none;}.navbar .brand { float: left; display: block; padding: 8px 20px 12px; margin-left: -20px; font-size: 20px; font-weight: 200; line-height: 1; color: #999999;}.navbar .navbar-text { margin-bottom: 0; line-height: 40px;}.navbar .navbar-link { color: #999999;}.navbar .navbar-link:hover { color: #ffffff;}.navbar .btn,.navbar .btn-group { margin-top: 5px;}.navbar .btn-group .btn { margin: 0;}.navbar-form { margin-bottom: 0; *zoom: 1;}.navbar-form:before,.navbar-form:after { display: table; content: "";}.navbar-form:after { clear: both;}.navbar-form input,.navbar-form select,.navbar-form .radio,.navbar-form .checkbox { margin-top: 5px;}.navbar-form input,.navbar-form select { display: inline-block; margin-bottom: 0;}.navbar-form input[type="image"],.navbar-form input[type="checkbox"],.navbar-form input[type="radio"] { margin-top: 3px;}.navbar-form .input-append,.navbar-form .input-prepend { margin-top: 6px; white-space: nowrap;}.navbar-form .input-append input,.navbar-form .input-prepend input { margin-top: 0;}.navbar-search { position: relative; float: left; margin-top: 6px; margin-bottom: 0;}.navbar-search .search-query { padding: 4px 9px; font-family: "Helvetica Neue", Helvetica, Arial, sans-serif; font-size: 13px; font-weight: normal; line-height: 1; color: #ffffff; background-color: #626262; border: 1px solid #151515; -webkit-box-shadow: inset 0 1px 2px rgba(0,0,0,.1), 0 1px 0 rgba(255,255,255,.15); -moz-box-shadow: inset 0 1px 2px rgba(0,0,0,.1), 0 1px 0 rgba(255,255,255,.15); box-shadow: inset 0 1px 2px rgba(0,0,0,.1), 0 1px 0 rgba(255,255,255,.15); -webkit-transition: none; -moz-transition: none; -ms-transition: none; -o-transition: none; transition: none;}.navbar-search .search-query:-moz-placeholder { color: #cccccc;}.navbar-search .search-query:-ms-input-placeholder { color: #cccccc;}.navbar-search .search-query::-webkit-input-placeholder { color: #cccccc;}.navbar-search .search-query:focus,.navbar-search .search-query.focused { padding: 5px 10px; color: #333333; text-shadow: 0 1px 0 #ffffff; background-color: #ffffff; border: 0; -webkit-box-shadow: 0 0 3px rgba(0, 0, 0, 0.15); -moz-box-shadow: 0 0 3px rgba(0, 0, 0, 0.15); box-shadow: 0 0 3px rgba(0, 0, 0, 0.15); outline: 0;}.navbar-fixed-top,.navbar-fixed-bottom { position: fixed; right: 0; left: 0; z-index: 1030; margin-bottom: 0;}.navbar-fixed-top .navbar-inner,.navbar-fixed-bottom .navbar-inner { padding-left: 0; padding-right: 0; -webkit-border-radius: 0; -moz-border-radius: 0; border-radius: 0;}.navbar-fixed-top .container,.navbar-fixed-bottom .container { width: 940px;}.navbar-fixed-top { top: 0;}.navbar-fixed-bottom { bottom: 0;}.navbar .nav { position: relative; left: 0; display: block; float: left; margin: 0 10px 0 0;}.navbar .nav.pull-right { float: right;}.navbar .nav > li { display: block; float: left;}.navbar .nav > li > a { float: none; padding: 9px 10px 11px; line-height: 19px; color: #999999; text-decoration: none; text-shadow: 0 -1px 0 rgba(0, 0, 0, 0.25);}.navbar .btn { display: inline-block; padding: 4px 10px 4px; margin: 5px 5px 6px; line-height: 18px;}.navbar .btn-group { margin: 0; padding: 5px 5px 6px;}.navbar .nav > li > a:hover { background-color: transparent; color: #ffffff; text-decoration: none;}.navbar .nav .active > a,.navbar .nav .active > a:hover { color: #ffffff; text-decoration: none; background-color: #222222;}.navbar .divider-vertical { height: 40px; width: 1px; margin: 0 9px; overflow: hidden; background-color: #222222; border-right: 1px solid #333333;}.navbar .nav.pull-right { margin-left: 10px; margin-right: 0;}.navbar .btn-navbar { display: none; float: right; padding: 7px 10px; margin-left: 5px; margin-right: 5px; background-color: #2c2c2c; background-image: -moz-linear-gradient(top, #333333, #222222); background-image: -ms-linear-gradient(top, #333333, #222222); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#333333), to(#222222)); background-image: -webkit-linear-gradient(top, #333333, #222222); background-image: -o-linear-gradient(top, #333333, #222222); background-image: linear-gradient(top, #333333, #222222); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#333333', endColorstr='#222222', GradientType=0); border-color: #222222 #222222 #000000; border-color: rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.1) rgba(0, 0, 0, 0.25); *background-color: #222222; /* Darken IE7 buttons by default so they stand out more given they won't have borders */ filter: progid:DXImageTransform.Microsoft.gradient(enabled = false); -webkit-box-shadow: inset 0 1px 0 rgba(255,255,255,.1), 0 1px 0 rgba(255,255,255,.075); -moz-box-shadow: inset 0 1px 0 rgba(255,255,255,.1), 0 1px 0 rgba(255,255,255,.075); box-shadow: inset 0 1px 0 rgba(255,255,255,.1), 0 1px 0 rgba(255,255,255,.075);}.navbar .btn-navbar:hover,.navbar .btn-navbar:active,.navbar .btn-navbar.active,.navbar .btn-navbar.disabled,.navbar .btn-navbar[disabled] { background-color: #222222; *background-color: #151515;}.navbar .btn-navbar:active,.navbar .btn-navbar.active { background-color: #080808 \9;}.navbar .btn-navbar .icon-bar { display: block; width: 18px; height: 2px; background-color: #f5f5f5; -webkit-border-radius: 1px; -moz-border-radius: 1px; border-radius: 1px; -webkit-box-shadow: 0 1px 0 rgba(0, 0, 0, 0.25); -moz-box-shadow: 0 1px 0 rgba(0, 0, 0, 0.25); box-shadow: 0 1px 0 rgba(0, 0, 0, 0.25);}.btn-navbar .icon-bar + .icon-bar { margin-top: 3px;}.navbar .dropdown-menu:before { content: ''; display: inline-block; border-left: 7px solid transparent; border-right: 7px solid transparent; border-bottom: 7px solid #ccc; border-bottom-color: rgba(0, 0, 0, 0.2); position: absolute; top: -7px; left: 9px;}.navbar .dropdown-menu:after { content: ''; display: inline-block; border-left: 6px solid transparent; border-right: 6px solid transparent; border-bottom: 6px solid #ffffff; position: absolute; top: -6px; left: 10px;}.navbar-fixed-bottom .dropdown-menu:before { border-top: 7px solid #ccc; border-top-color: rgba(0, 0, 0, 0.2); border-bottom: 0; bottom: -7px; top: auto;}.navbar-fixed-bottom .dropdown-menu:after { border-top: 6px solid #ffffff; border-bottom: 0; bottom: -6px; top: auto;}.navbar .nav li.dropdown .dropdown-toggle .caret,.navbar .nav li.dropdown.open .caret { border-top-color: #ffffff; border-bottom-color: #ffffff;}.navbar .nav li.dropdown.active .caret { opacity: 1; filter: alpha(opacity=100);}.navbar .nav li.dropdown.open > .dropdown-toggle,.navbar .nav li.dropdown.active > .dropdown-toggle,.navbar .nav li.dropdown.open.active > .dropdown-toggle { background-color: transparent;}.navbar .nav li.dropdown.active > .dropdown-toggle:hover { color: #ffffff;}.navbar .pull-right .dropdown-menu,.navbar .dropdown-menu.pull-right { left: auto; right: 0;}.navbar .pull-right .dropdown-menu:before,.navbar .dropdown-menu.pull-right:before { left: auto; right: 12px;}.navbar .pull-right .dropdown-menu:after,.navbar .dropdown-menu.pull-right:after { left: auto; right: 13px;}.breadcrumb { padding: 7px 14px; margin: 0 0 18px; list-style: none; background-color: #fbfbfb; background-image: -moz-linear-gradient(top, #ffffff, #f5f5f5); background-image: -ms-linear-gradient(top, #ffffff, #f5f5f5); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#ffffff), to(#f5f5f5)); background-image: -webkit-linear-gradient(top, #ffffff, #f5f5f5); background-image: -o-linear-gradient(top, #ffffff, #f5f5f5); background-image: linear-gradient(top, #ffffff, #f5f5f5); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#ffffff', endColorstr='#f5f5f5', GradientType=0); border: 1px solid #ddd; -webkit-border-radius: 3px; -moz-border-radius: 3px; border-radius: 3px; -webkit-box-shadow: inset 0 1px 0 #ffffff; -moz-box-shadow: inset 0 1px 0 #ffffff; box-shadow: inset 0 1px 0 #ffffff;}.breadcrumb li { display: inline-block; *display: inline; /* IE7 inline-block hack */ *zoom: 1; text-shadow: 0 1px 0 #ffffff;}.breadcrumb .divider { padding: 0 5px; color: #999999;}.breadcrumb .active a { color: #333333;}.pagination { height: 36px; margin: 18px 0;}.pagination ul { display: inline-block; *display: inline; /* IE7 inline-block hack */ *zoom: 1; margin-left: 0; margin-bottom: 0; -webkit-border-radius: 3px; -moz-border-radius: 3px; border-radius: 3px; -webkit-box-shadow: 0 1px 2px rgba(0, 0, 0, 0.05); -moz-box-shadow: 0 1px 2px rgba(0, 0, 0, 0.05); box-shadow: 0 1px 2px rgba(0, 0, 0, 0.05);}.pagination li { display: inline;}.pagination a { float: left; padding: 0 14px; line-height: 34px; text-decoration: none; border: 1px solid #ddd; border-left-width: 0;}.pagination a:hover,.pagination .active a { background-color: #f5f5f5;}.pagination .active a { color: #999999; cursor: default;}.pagination .disabled span,.pagination .disabled a,.pagination .disabled a:hover { color: #999999; background-color: transparent; cursor: default;}.pagination li:first-child a { border-left-width: 1px; -webkit-border-radius: 3px 0 0 3px; -moz-border-radius: 3px 0 0 3px; border-radius: 3px 0 0 3px;}.pagination li:last-child a { -webkit-border-radius: 0 3px 3px 0; -moz-border-radius: 0 3px 3px 0; border-radius: 0 3px 3px 0;}.pagination-centered { text-align: center;}.pagination-right { text-align: right;}.pager { margin-left: 0; margin-bottom: 18px; list-style: none; text-align: center; *zoom: 1;}.pager:before,.pager:after { display: table; content: "";}.pager:after { clear: both;}.pager li { display: inline;}.pager a { display: inline-block; padding: 5px 14px; background-color: #fff; border: 1px solid #ddd; -webkit-border-radius: 15px; -moz-border-radius: 15px; border-radius: 15px;}.pager a:hover { text-decoration: none; background-color: #f5f5f5;}.pager .next a { float: right;}.pager .previous a { float: left;}.pager .disabled a,.pager .disabled a:hover { color: #999999; background-color: #fff; cursor: default;}.thumbnails { margin-left: -20px; list-style: none; *zoom: 1;}.thumbnails:before,.thumbnails:after { display: table; content: "";}.thumbnails:after { clear: both;}.row-fluid .thumbnails { margin-left: 0;}.thumbnails > li { float: left; margin-bottom: 18px; margin-left: 20px;}.thumbnail { display: block; padding: 4px; line-height: 1; border: 1px solid #ddd; -webkit-border-radius: 4px; -moz-border-radius: 4px; border-radius: 4px; -webkit-box-shadow: 0 1px 1px rgba(0, 0, 0, 0.075); -moz-box-shadow: 0 1px 1px rgba(0, 0, 0, 0.075); box-shadow: 0 1px 1px rgba(0, 0, 0, 0.075);}a.thumbnail:hover { border-color: #0088cc; -webkit-box-shadow: 0 1px 4px rgba(0, 105, 214, 0.25); -moz-box-shadow: 0 1px 4px rgba(0, 105, 214, 0.25); box-shadow: 0 1px 4px rgba(0, 105, 214, 0.25);}.thumbnail > img { display: block; max-width: 100%; margin-left: auto; margin-right: auto;}.thumbnail .caption { padding: 9px;}.alert { padding: 8px 35px 8px 14px; margin-bottom: 18px; text-shadow: 0 1px 0 rgba(255, 255, 255, 0.5); background-color: #fcf8e3; border: 1px solid #fbeed5; -webkit-border-radius: 4px; -moz-border-radius: 4px; border-radius: 4px; color: #c09853;}.alert-heading { color: inherit;}.alert .close { position: relative; top: -2px; right: -21px; line-height: 18px;}.alert-success { background-color: #dff0d8; border-color: #d6e9c6; color: #468847;}.alert-danger,.alert-error { background-color: #f2dede; border-color: #eed3d7; color: #b94a48;}.alert-info { background-color: #d9edf7; border-color: #bce8f1; color: #3a87ad;}.alert-block { padding-top: 14px; padding-bottom: 14px;}.alert-block > p,.alert-block > ul { margin-bottom: 0;}.alert-block p + p { margin-top: 5px;}@-webkit-keyframes progress-bar-stripes { from { background-position: 40px 0; } to { background-position: 0 0; }}@-moz-keyframes progress-bar-stripes { from { background-position: 40px 0; } to { background-position: 0 0; }}@-ms-keyframes progress-bar-stripes { from { background-position: 40px 0; } to { background-position: 0 0; }}@-o-keyframes progress-bar-stripes { from { background-position: 0 0; } to { background-position: 40px 0; }}@keyframes progress-bar-stripes { from { background-position: 40px 0; } to { background-position: 0 0; }}.progress { overflow: hidden; height: 18px; margin-bottom: 18px; background-color: #f7f7f7; background-image: -moz-linear-gradient(top, #f5f5f5, #f9f9f9); background-image: -ms-linear-gradient(top, #f5f5f5, #f9f9f9); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#f5f5f5), to(#f9f9f9)); background-image: -webkit-linear-gradient(top, #f5f5f5, #f9f9f9); background-image: -o-linear-gradient(top, #f5f5f5, #f9f9f9); background-image: linear-gradient(top, #f5f5f5, #f9f9f9); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#f5f5f5', endColorstr='#f9f9f9', GradientType=0); -webkit-box-shadow: inset 0 1px 2px rgba(0, 0, 0, 0.1); -moz-box-shadow: inset 0 1px 2px rgba(0, 0, 0, 0.1); box-shadow: inset 0 1px 2px rgba(0, 0, 0, 0.1); -webkit-border-radius: 4px; -moz-border-radius: 4px; border-radius: 4px;}.progress .bar { width: 0%; height: 18px; color: #ffffff; font-size: 12px; text-align: center; text-shadow: 0 -1px 0 rgba(0, 0, 0, 0.25); background-color: #0e90d2; background-image: -moz-linear-gradient(top, #149bdf, #0480be); background-image: -ms-linear-gradient(top, #149bdf, #0480be); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#149bdf), to(#0480be)); background-image: -webkit-linear-gradient(top, #149bdf, #0480be); background-image: -o-linear-gradient(top, #149bdf, #0480be); background-image: linear-gradient(top, #149bdf, #0480be); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#149bdf', endColorstr='#0480be', GradientType=0); -webkit-box-shadow: inset 0 -1px 0 rgba(0, 0, 0, 0.15); -moz-box-shadow: inset 0 -1px 0 rgba(0, 0, 0, 0.15); box-shadow: inset 0 -1px 0 rgba(0, 0, 0, 0.15); -webkit-box-sizing: border-box; -moz-box-sizing: border-box; -ms-box-sizing: border-box; box-sizing: border-box; -webkit-transition: width 0.6s ease; -moz-transition: width 0.6s ease; -ms-transition: width 0.6s ease; -o-transition: width 0.6s ease; transition: width 0.6s ease;}.progress-striped .bar { background-color: #149bdf; background-image: -webkit-gradient(linear, 0 100%, 100% 0, color-stop(0.25, rgba(255, 255, 255, 0.15)), color-stop(0.25, transparent), color-stop(0.5, transparent), color-stop(0.5, rgba(255, 255, 255, 0.15)), color-stop(0.75, rgba(255, 255, 255, 0.15)), color-stop(0.75, transparent), to(transparent)); background-image: -webkit-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -moz-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -ms-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -o-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); -webkit-background-size: 40px 40px; -moz-background-size: 40px 40px; -o-background-size: 40px 40px; background-size: 40px 40px;}.progress.active .bar { -webkit-animation: progress-bar-stripes 2s linear infinite; -moz-animation: progress-bar-stripes 2s linear infinite; -ms-animation: progress-bar-stripes 2s linear infinite; -o-animation: progress-bar-stripes 2s linear infinite; animation: progress-bar-stripes 2s linear infinite;}.progress-danger .bar { background-color: #dd514c; background-image: -moz-linear-gradient(top, #ee5f5b, #c43c35); background-image: -ms-linear-gradient(top, #ee5f5b, #c43c35); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#ee5f5b), to(#c43c35)); background-image: -webkit-linear-gradient(top, #ee5f5b, #c43c35); background-image: -o-linear-gradient(top, #ee5f5b, #c43c35); background-image: linear-gradient(top, #ee5f5b, #c43c35); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#ee5f5b', endColorstr='#c43c35', GradientType=0);}.progress-danger.progress-striped .bar { background-color: #ee5f5b; background-image: -webkit-gradient(linear, 0 100%, 100% 0, color-stop(0.25, rgba(255, 255, 255, 0.15)), color-stop(0.25, transparent), color-stop(0.5, transparent), color-stop(0.5, rgba(255, 255, 255, 0.15)), color-stop(0.75, rgba(255, 255, 255, 0.15)), color-stop(0.75, transparent), to(transparent)); background-image: -webkit-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -moz-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -ms-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -o-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent);}.progress-success .bar { background-color: #5eb95e; background-image: -moz-linear-gradient(top, #62c462, #57a957); background-image: -ms-linear-gradient(top, #62c462, #57a957); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#62c462), to(#57a957)); background-image: -webkit-linear-gradient(top, #62c462, #57a957); background-image: -o-linear-gradient(top, #62c462, #57a957); background-image: linear-gradient(top, #62c462, #57a957); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#62c462', endColorstr='#57a957', GradientType=0);}.progress-success.progress-striped .bar { background-color: #62c462; background-image: -webkit-gradient(linear, 0 100%, 100% 0, color-stop(0.25, rgba(255, 255, 255, 0.15)), color-stop(0.25, transparent), color-stop(0.5, transparent), color-stop(0.5, rgba(255, 255, 255, 0.15)), color-stop(0.75, rgba(255, 255, 255, 0.15)), color-stop(0.75, transparent), to(transparent)); background-image: -webkit-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -moz-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -ms-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -o-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent);}.progress-info .bar { background-color: #4bb1cf; background-image: -moz-linear-gradient(top, #5bc0de, #339bb9); background-image: -ms-linear-gradient(top, #5bc0de, #339bb9); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#5bc0de), to(#339bb9)); background-image: -webkit-linear-gradient(top, #5bc0de, #339bb9); background-image: -o-linear-gradient(top, #5bc0de, #339bb9); background-image: linear-gradient(top, #5bc0de, #339bb9); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#5bc0de', endColorstr='#339bb9', GradientType=0);}.progress-info.progress-striped .bar { background-color: #5bc0de; background-image: -webkit-gradient(linear, 0 100%, 100% 0, color-stop(0.25, rgba(255, 255, 255, 0.15)), color-stop(0.25, transparent), color-stop(0.5, transparent), color-stop(0.5, rgba(255, 255, 255, 0.15)), color-stop(0.75, rgba(255, 255, 255, 0.15)), color-stop(0.75, transparent), to(transparent)); background-image: -webkit-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -moz-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -ms-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -o-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent);}.progress-warning .bar { background-color: #faa732; background-image: -moz-linear-gradient(top, #fbb450, #f89406); background-image: -ms-linear-gradient(top, #fbb450, #f89406); background-image: -webkit-gradient(linear, 0 0, 0 100%, from(#fbb450), to(#f89406)); background-image: -webkit-linear-gradient(top, #fbb450, #f89406); background-image: -o-linear-gradient(top, #fbb450, #f89406); background-image: linear-gradient(top, #fbb450, #f89406); background-repeat: repeat-x; filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#fbb450', endColorstr='#f89406', GradientType=0);}.progress-warning.progress-striped .bar { background-color: #fbb450; background-image: -webkit-gradient(linear, 0 100%, 100% 0, color-stop(0.25, rgba(255, 255, 255, 0.15)), color-stop(0.25, transparent), color-stop(0.5, transparent), color-stop(0.5, rgba(255, 255, 255, 0.15)), color-stop(0.75, rgba(255, 255, 255, 0.15)), color-stop(0.75, transparent), to(transparent)); background-image: -webkit-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -moz-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -ms-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: -o-linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent); background-image: linear-gradient(-45deg, rgba(255, 255, 255, 0.15) 25%, transparent 25%, transparent 50%, rgba(255, 255, 255, 0.15) 50%, rgba(255, 255, 255, 0.15) 75%, transparent 75%, transparent);}.hero-unit { padding: 60px; margin-bottom: 30px; background-color: #eeeeee; -webkit-border-radius: 6px; -moz-border-radius: 6px; border-radius: 6px;}.hero-unit h1 { margin-bottom: 0; font-size: 60px; line-height: 1; color: inherit; letter-spacing: -1px;}.hero-unit p { font-size: 18px; font-weight: 200; line-height: 27px; color: inherit;}.tooltip { position: absolute; z-index: 1020; display: block; visibility: visible; padding: 5px; font-size: 11px; opacity: 0; filter: alpha(opacity=0);}.tooltip.in { opacity: 0.8; filter: alpha(opacity=80);}.tooltip.top { margin-top: -2px;}.tooltip.right { margin-left: 2px;}.tooltip.bottom { margin-top: 2px;}.tooltip.left { margin-left: -2px;}.tooltip.top .tooltip-arrow { bottom: 0; left: 50%; margin-left: -5px; border-left: 5px solid transparent; border-right: 5px solid transparent; border-top: 5px solid #000000;}.tooltip.left .tooltip-arrow { top: 50%; right: 0; margin-top: -5px; border-top: 5px solid transparent; border-bottom: 5px solid transparent; border-left: 5px solid #000000;}.tooltip.bottom .tooltip-arrow { top: 0; left: 50%; margin-left: -5px; border-left: 5px solid transparent; border-right: 5px solid transparent; border-bottom: 5px solid #000000;}.tooltip.right .tooltip-arrow { top: 50%; left: 0; margin-top: -5px; border-top: 5px solid transparent; border-bottom: 5px solid transparent; border-right: 5px solid #000000;}.tooltip-inner { max-width: 200px; padding: 3px 8px; color: #ffffff; text-align: center; text-decoration: none; background-color: #000000; -webkit-border-radius: 4px; -moz-border-radius: 4px; border-radius: 4px;}.tooltip-arrow { position: absolute; width: 0; height: 0;}.popover { position: absolute; top: 0; left: 0; z-index: 1010; display: none; padding: 5px;}.popover.top { margin-top: -5px;}.popover.right { margin-left: 5px;}.popover.bottom { margin-top: 5px;}.popover.left { margin-left: -5px;}.popover.top .arrow { bottom: 0; left: 50%; margin-left: -5px; border-left: 5px solid transparent; border-right: 5px solid transparent; border-top: 5px solid #000000;}.popover.right .arrow { top: 50%; left: 0; margin-top: -5px; border-top: 5px solid transparent; border-bottom: 5px solid transparent; border-right: 5px solid #000000;}.popover.bottom .arrow { top: 0; left: 50%; margin-left: -5px; border-left: 5px solid transparent; border-right: 5px solid transparent; border-bottom: 5px solid #000000;}.popover.left .arrow { top: 50%; right: 0; margin-top: -5px; border-top: 5px solid transparent; border-bottom: 5px solid transparent; border-left: 5px solid #000000;}.popover .arrow { position: absolute; width: 0; height: 0;}.popover-inner { padding: 3px; width: 280px; overflow: hidden; background: #000000; background: rgba(0, 0, 0, 0.8); -webkit-border-radius: 6px; -moz-border-radius: 6px; border-radius: 6px; -webkit-box-shadow: 0 3px 7px rgba(0, 0, 0, 0.3); -moz-box-shadow: 0 3px 7px rgba(0, 0, 0, 0.3); box-shadow: 0 3px 7px rgba(0, 0, 0, 0.3);}.popover-title { padding: 9px 15px; line-height: 1; background-color: #f5f5f5; border-bottom: 1px solid #eee; -webkit-border-radius: 3px 3px 0 0; -moz-border-radius: 3px 3px 0 0; border-radius: 3px 3px 0 0;}.popover-content { padding: 14px; background-color: #ffffff; -webkit-border-radius: 0 0 3px 3px; -moz-border-radius: 0 0 3px 3px; border-radius: 0 0 3px 3px; -webkit-background-clip: padding-box; -moz-background-clip: padding-box; background-clip: padding-box;}.popover-content p,.popover-content ul,.popover-content ol { margin-bottom: 0;}.modal-open .dropdown-menu { z-index: 2050;}.modal-open .dropdown.open { *z-index: 2050;}.modal-open .popover { z-index: 2060;}.modal-open .tooltip { z-index: 2070;}.modal-backdrop { position: fixed; top: 0; right: 0; bottom: 0; left: 0; z-index: 1040; background-color: #000000;}.modal-backdrop.fade { opacity: 0;}.modal-backdrop,.modal-backdrop.fade.in { opacity: 0.8; filter: alpha(opacity=80);}.modal { position: fixed; top: 50%; left: 50%; z-index: 1050; overflow: auto; width: 560px; margin: -250px 0 0 -280px; background-color: #ffffff; border: 1px solid #999; border: 1px solid rgba(0, 0, 0, 0.3); *border: 1px solid #999; /* IE6-7 */ -webkit-border-radius: 6px; -moz-border-radius: 6px; border-radius: 6px; -webkit-box-shadow: 0 3px 7px rgba(0, 0, 0, 0.3); -moz-box-shadow: 0 3px 7px rgba(0, 0, 0, 0.3); box-shadow: 0 3px 7px rgba(0, 0, 0, 0.3); -webkit-background-clip: padding-box; -moz-background-clip: padding-box; background-clip: padding-box;}.modal.fade { -webkit-transition: opacity .3s linear, top .3s ease-out; -moz-transition: opacity .3s linear, top .3s ease-out; -ms-transition: opacity .3s linear, top .3s ease-out; -o-transition: opacity .3s linear, top .3s ease-out; transition: opacity .3s linear, top .3s ease-out; top: -25%;}.modal.fade.in { top: 50%;}.modal-header { padding: 9px 15px; border-bottom: 1px solid #eee;}.modal-header .close { margin-top: 2px;}.modal-body { overflow-y: auto; max-height: 400px; padding: 15px;}.modal-form { margin-bottom: 0;}.modal-footer { padding: 14px 15px 15px; margin-bottom: 0; text-align: right; background-color: #f5f5f5; border-top: 1px solid #ddd; -webkit-border-radius: 0 0 6px 6px; -moz-border-radius: 0 0 6px 6px; border-radius: 0 0 6px 6px; -webkit-box-shadow: inset 0 1px 0 #ffffff; -moz-box-shadow: inset 0 1px 0 #ffffff; box-shadow: inset 0 1px 0 #ffffff; *zoom: 1;}.modal-footer:before,.modal-footer:after { display: table; content: "";}.modal-footer:after { clear: both;}.modal-footer .btn + .btn { margin-left: 5px; margin-bottom: 0;}.modal-footer .btn-group .btn + .btn { margin-left: -1px;}.dropup,.dropdown { position: relative;}.dropdown-toggle { *margin-bottom: -3px;}.dropdown-toggle:active,.open .dropdown-toggle { outline: 0;}.caret { display: inline-block; width: 0; height: 0; vertical-align: top; border-top: 4px solid #000000; border-right: 4px solid transparent; border-left: 4px solid transparent; content: ""; opacity: 0.3; filter: alpha(opacity=30);}.dropdown .caret { margin-top: 8px; margin-left: 2px;}.dropdown:hover .caret,.open .caret { opacity: 1; filter: alpha(opacity=100);}.dropdown-menu { position: absolute; top: 100%; left: 0; z-index: 1000; display: none; float: left; min-width: 160px; padding: 4px 0; margin: 1px 0 0; list-style: none; background-color: #ffffff; border: 1px solid #ccc; border: 1px solid rgba(0, 0, 0, 0.2); *border-right-width: 2px; *border-bottom-width: 2px; -webkit-border-radius: 5px; -moz-border-radius: 5px; border-radius: 5px; -webkit-box-shadow: 0 5px 10px rgba(0, 0, 0, 0.2); -moz-box-shadow: 0 5px 10px rgba(0, 0, 0, 0.2); box-shadow: 0 5px 10px rgba(0, 0, 0, 0.2); -webkit-background-clip: padding-box; -moz-background-clip: padding; background-clip: padding-box;}.dropdown-menu.pull-right { right: 0; left: auto;}.dropdown-menu .divider { *width: 100%; height: 1px; margin: 8px 1px; *margin: -5px 0 5px; overflow: hidden; background-color: #e5e5e5; border-bottom: 1px solid #ffffff;}.dropdown-menu a { display: block; padding: 3px 15px; clear: both; font-weight: normal; line-height: 18px; color: #333333; white-space: nowrap;}.dropdown-menu li > a:hover,.dropdown-menu .active > a,.dropdown-menu .active > a:hover { color: #ffffff; text-decoration: none; background-color: #0088cc;}.open { *z-index: 1000;}.open > .dropdown-menu { display: block;}.pull-right > .dropdown-menu { right: 0; left: auto;}.dropup .caret,.navbar-fixed-bottom .dropdown .caret { border-top: 0; border-bottom: 4px solid #000000; content: "\2191";}.dropup .dropdown-menu,.navbar-fixed-bottom .dropdown .dropdown-menu { top: auto; bottom: 100%; margin-bottom: 1px;}.typeahead { margin-top: 2px; -webkit-border-radius: 4px; -moz-border-radius: 4px; border-radius: 4px;}.accordion { margin-bottom: 18px;}.accordion-group { margin-bottom: 2px; border: 1px solid #e5e5e5; -webkit-border-radius: 4px; -moz-border-radius: 4px; border-radius: 4px;}.accordion-heading { border-bottom: 0;}.accordion-heading .accordion-toggle { display: block; padding: 8px 15px;}.accordion-toggle { cursor: pointer;}.accordion-inner { padding: 9px 15px; border-top: 1px solid #e5e5e5;}.carousel { position: relative; margin-bottom: 18px; line-height: 1;}.carousel-inner { overflow: hidden; width: 100%; position: relative;}.carousel .item { display: none; position: relative; -webkit-transition: 0.6s ease-in-out left; -moz-transition: 0.6s ease-in-out left; -ms-transition: 0.6s ease-in-out left; -o-transition: 0.6s ease-in-out left; transition: 0.6s ease-in-out left;}.carousel .item > img { display: block; line-height: 1;}.carousel .active,.carousel .next,.carousel .prev { display: block;}.carousel .active { left: 0;}.carousel .next,.carousel .prev { position: absolute; top: 0; width: 100%;}.carousel .next { left: 100%;}.carousel .prev { left: -100%;}.carousel .next.left,.carousel .prev.right { left: 0;}.carousel .active.left { left: -100%;}.carousel .active.right { left: 100%;}.carousel-control { position: absolute; top: 40%; left: 15px; width: 40px; height: 40px; margin-top: -20px; font-size: 60px; font-weight: 100; line-height: 30px; color: #ffffff; text-align: center; background: #222222; border: 3px solid #ffffff; -webkit-border-radius: 23px; -moz-border-radius: 23px; border-radius: 23px; opacity: 0.5; filter: alpha(opacity=50);}.carousel-control.right { left: auto; right: 15px;}.carousel-control:hover { color: #ffffff; text-decoration: none; opacity: 0.9; filter: alpha(opacity=90);}.carousel-caption { position: absolute; left: 0; right: 0; bottom: 0; padding: 10px 15px 5px; background: #333333; background: rgba(0, 0, 0, 0.75);}.carousel-caption h4,.carousel-caption p { color: #ffffff;}.well { min-height: 20px; padding: 19px; margin-bottom: 20px; background-color: #f5f5f5; border: 1px solid #eee; border: 1px solid rgba(0, 0, 0, 0.05); -webkit-border-radius: 4px; -moz-border-radius: 4px; border-radius: 4px; -webkit-box-shadow: inset 0 1px 1px rgba(0, 0, 0, 0.05); -moz-box-shadow: inset 0 1px 1px rgba(0, 0, 0, 0.05); box-shadow: inset 0 1px 1px rgba(0, 0, 0, 0.05);}.well blockquote { border-color: #ddd; border-color: rgba(0, 0, 0, 0.15);}.well-large { padding: 24px; -webkit-border-radius: 6px; -moz-border-radius: 6px; border-radius: 6px;}.well-small { padding: 9px; -webkit-border-radius: 3px; -moz-border-radius: 3px; border-radius: 3px;}.close { float: right; font-size: 20px; font-weight: bold; line-height: 18px; color: #000000; text-shadow: 0 1px 0 #ffffff; opacity: 0.2; filter: alpha(opacity=20);}.close:hover { color: #000000; text-decoration: none; cursor: pointer; opacity: 0.4; filter: alpha(opacity=40);}button.close { padding: 0; cursor: pointer; background: transparent; border: 0; -webkit-appearance: none;}.pull-right { float: right;}.pull-left { float: left;}.hide { display: none;}.show { display: block;}.invisible { visibility: hidden;}.fade { opacity: 0; -webkit-transition: opacity 0.15s linear; -moz-transition: opacity 0.15s linear; -ms-transition: opacity 0.15s linear; -o-transition: opacity 0.15s linear; transition: opacity 0.15s linear;}.fade.in { opacity: 1;}.collapse { position: relative; height: 0; overflow: hidden; -webkit-transition: height 0.35s ease; -moz-transition: height 0.35s ease; -ms-transition: height 0.35s ease; -o-transition: height 0.35s ease; transition: height 0.35s ease;}.collapse.in { height: auto;}.hidden { display: none; visibility: hidden;}.visible-phone { display: none !important;}.visible-tablet { display: none !important;}.hidden-desktop { display: none !important;}@media (max-width: 767px) { .visible-phone { display: inherit !important; } .hidden-phone { display: none !important; } .hidden-desktop { display: inherit !important; } .visible-desktop { display: none !important; }}@media (min-width: 768px) and (max-width: 979px) { .visible-tablet { display: inherit !important; } .hidden-tablet { display: none !important; } .hidden-desktop { display: inherit !important; } .visible-desktop { display: none !important ; }}@media (max-width: 480px) { .nav-collapse { -webkit-transform: translate3d(0, 0, 0); } .page-header h1 small { display: block; line-height: 18px; } input[type="checkbox"], input[type="radio"] { border: 1px solid #ccc; } .form-horizontal .control-group > label { float: none; width: auto; padding-top: 0; text-align: left; } .form-horizontal .controls { margin-left: 0; } .form-horizontal .control-list { padding-top: 0; } .form-horizontal .form-actions { padding-left: 10px; padding-right: 10px; } .modal { position: absolute; top: 10px; left: 10px; right: 10px; width: auto; margin: 0; } .modal.fade.in { top: auto; } .modal-header .close { padding: 10px; margin: -10px; } .carousel-caption { position: static; }}@media (max-width: 767px) { body { padding-left: 20px; padding-right: 20px; } .navbar-fixed-top, .navbar-fixed-bottom { margin-left: -20px; margin-right: -20px; } .container-fluid { padding: 0; } .dl-horizontal dt { float: none; clear: none; width: auto; text-align: left; } .dl-horizontal dd { margin-left: 0; } .container { width: auto; } .row-fluid { width: 100%; } .row, .thumbnails { margin-left: 0; } [class*="span"], .row-fluid [class*="span"] { float: none; display: block; width: auto; margin-left: 0; } .input-large, .input-xlarge, .input-xxlarge, input[class*="span"], select[class*="span"], textarea[class*="span"], .uneditable-input { display: block; width: 100%; min-height: 28px; -webkit-box-sizing: border-box; -moz-box-sizing: border-box; -ms-box-sizing: border-box; box-sizing: border-box; } .input-prepend input, .input-append input, .input-prepend input[class*="span"], .input-append input[class*="span"] { display: inline-block; width: auto; }}@media (min-width: 768px) and (max-width: 979px) { .row { margin-left: -20px; *zoom: 1; } .row:before, .row:after { display: table; content: ""; } .row:after { clear: both; } [class*="span"] { float: left; margin-left: 20px; } .container, .navbar-fixed-top .container, .navbar-fixed-bottom .container { width: 724px; } .span12 { width: 724px; } .span11 { width: 662px; } .span10 { width: 600px; } .span9 { width: 538px; } .span8 { width: 476px; } .span7 { width: 414px; } .span6 { width: 352px; } .span5 { width: 290px; } .span4 { width: 228px; } .span3 { width: 166px; } .span2 { width: 104px; } .span1 { width: 42px; } .offset12 { margin-left: 764px; } .offset11 { margin-left: 702px; } .offset10 { margin-left: 640px; } .offset9 { margin-left: 578px; } .offset8 { margin-left: 516px; } .offset7 { margin-left: 454px; } .offset6 { margin-left: 392px; } .offset5 { margin-left: 330px; } .offset4 { margin-left: 268px; } .offset3 { margin-left: 206px; } .offset2 { margin-left: 144px; } .offset1 { margin-left: 82px; } .row-fluid { width: 100%; *zoom: 1; } .row-fluid:before, .row-fluid:after { display: table; content: ""; } .row-fluid:after { clear: both; } .row-fluid [class*="span"] { display: block; width: 100%; min-height: 28px; -webkit-box-sizing: border-box; -moz-box-sizing: border-box; -ms-box-sizing: border-box; box-sizing: border-box; float: left; margin-left: 2.762430939%; *margin-left: 2.709239449638298%; } .row-fluid [class*="span"]:first-child { margin-left: 0; } .row-fluid .span12 { width: 99.999999993%; *width: 99.9468085036383%; } .row-fluid .span11 { width: 91.436464082%; *width: 91.38327259263829%; } .row-fluid .span10 { width: 82.87292817100001%; *width: 82.8197366816383%; } .row-fluid .span9 { width: 74.30939226%; *width: 74.25620077063829%; } .row-fluid .span8 { width: 65.74585634900001%; *width: 65.6926648596383%; } .row-fluid .span7 { width: 57.182320438000005%; *width: 57.129128948638304%; } .row-fluid .span6 { width: 48.618784527%; *width: 48.5655930376383%; } .row-fluid .span5 { width: 40.055248616%; *width: 40.0020571266383%; } .row-fluid .span4 { width: 31.491712705%; *width: 31.4385212156383%; } .row-fluid .span3 { width: 22.928176794%; *width: 22.874985304638297%; } .row-fluid .span2 { width: 14.364640883%; *width: 14.311449393638298%; } .row-fluid .span1 { width: 5.801104972%; *width: 5.747913482638298%; } input, textarea, .uneditable-input { margin-left: 0; } input.span12, textarea.span12, .uneditable-input.span12 { width: 714px; } input.span11, textarea.span11, .uneditable-input.span11 { width: 652px; } input.span10, textarea.span10, .uneditable-input.span10 { width: 590px; } input.span9, textarea.span9, .uneditable-input.span9 { width: 528px; } input.span8, textarea.span8, .uneditable-input.span8 { width: 466px; } input.span7, textarea.span7, .uneditable-input.span7 { width: 404px; } input.span6, textarea.span6, .uneditable-input.span6 { width: 342px; } input.span5, textarea.span5, .uneditable-input.span5 { width: 280px; } input.span4, textarea.span4, .uneditable-input.span4 { width: 218px; } input.span3, textarea.span3, .uneditable-input.span3 { width: 156px; } input.span2, textarea.span2, .uneditable-input.span2 { width: 94px; } input.span1, textarea.span1, .uneditable-input.span1 { width: 32px; }}@media (min-width: 1200px) { .row { margin-left: -30px; *zoom: 1; } .row:before, .row:after { display: table; content: ""; } .row:after { clear: both; } [class*="span"] { float: left; margin-left: 30px; } .container, .navbar-fixed-top .container, .navbar-fixed-bottom .container { width: 1170px; } .span12 { width: 1170px; } .span11 { width: 1070px; } .span10 { width: 970px; } .span9 { width: 870px; } .span8 { width: 770px; } .span7 { width: 670px; } .span6 { width: 570px; } .span5 { width: 470px; } .span4 { width: 370px; } .span3 { width: 270px; } .span2 { width: 170px; } .span1 { width: 70px; } .offset12 { margin-left: 1230px; } .offset11 { margin-left: 1130px; } .offset10 { margin-left: 1030px; } .offset9 { margin-left: 930px; } .offset8 { margin-left: 830px; } .offset7 { margin-left: 730px; } .offset6 { margin-left: 630px; } .offset5 { margin-left: 530px; } .offset4 { margin-left: 430px; } .offset3 { margin-left: 330px; } .offset2 { margin-left: 230px; } .offset1 { margin-left: 130px; } .row-fluid { width: 100%; *zoom: 1; } .row-fluid:before, .row-fluid:after { display: table; content: ""; } .row-fluid:after { clear: both; } .row-fluid [class*="span"] { display: block; width: 100%; min-height: 28px; -webkit-box-sizing: border-box; -moz-box-sizing: border-box; -ms-box-sizing: border-box; box-sizing: border-box; float: left; margin-left: 2.564102564%; *margin-left: 2.510911074638298%; } .row-fluid [class*="span"]:first-child { margin-left: 0; } .row-fluid .span12 { width: 100%; *width: 99.94680851063829%; } .row-fluid .span11 { width: 91.45299145300001%; *width: 91.3997999636383%; } .row-fluid .span10 { width: 82.905982906%; *width: 82.8527914166383%; } .row-fluid .span9 { width: 74.358974359%; *width: 74.30578286963829%; } .row-fluid .span8 { width: 65.81196581200001%; *width: 65.7587743226383%; } .row-fluid .span7 { width: 57.264957265%; *width: 57.2117657756383%; } .row-fluid .span6 { width: 48.717948718%; *width: 48.6647572286383%; } .row-fluid .span5 { width: 40.170940171000005%; *width: 40.117748681638304%; } .row-fluid .span4 { width: 31.623931624%; *width: 31.5707401346383%; } .row-fluid .span3 { width: 23.076923077%; *width: 23.0237315876383%; } .row-fluid .span2 { width: 14.529914530000001%; *width: 14.4767230406383%; } .row-fluid .span1 { width: 5.982905983%; *width: 5.929714493638298%; } input, textarea, .uneditable-input { margin-left: 0; } input.span12, textarea.span12, .uneditable-input.span12 { width: 1160px; } input.span11, textarea.span11, .uneditable-input.span11 { width: 1060px; } input.span10, textarea.span10, .uneditable-input.span10 { width: 960px; } input.span9, textarea.span9, .uneditable-input.span9 { width: 860px; } input.span8, textarea.span8, .uneditable-input.span8 { width: 760px; } input.span7, textarea.span7, .uneditable-input.span7 { width: 660px; } input.span6, textarea.span6, .uneditable-input.span6 { width: 560px; } input.span5, textarea.span5, .uneditable-input.span5 { width: 460px; } input.span4, textarea.span4, .uneditable-input.span4 { width: 360px; } input.span3, textarea.span3, .uneditable-input.span3 { width: 260px; } input.span2, textarea.span2, .uneditable-input.span2 { width: 160px; } input.span1, textarea.span1, .uneditable-input.span1 { width: 60px; } .thumbnails { margin-left: -30px; } .thumbnails > li { margin-left: 30px; } .row-fluid .thumbnails { margin-left: 0; }}@media (max-width: 979px) { body { padding-top: 0; } .navbar-fixed-top, .navbar-fixed-bottom { position: static; } .navbar-fixed-top { margin-bottom: 18px; } .navbar-fixed-bottom { margin-top: 18px; } .navbar-fixed-top .navbar-inner, .navbar-fixed-bottom .navbar-inner { padding: 5px; } .navbar .container { width: auto; padding: 0; } .navbar .brand { padding-left: 10px; padding-right: 10px; margin: 0 0 0 -5px; } .nav-collapse { clear: both; } .nav-collapse .nav { float: none; margin: 0 0 9px; } .nav-collapse .nav > li { float: none; } .nav-collapse .nav > li > a { margin-bottom: 2px; } .nav-collapse .nav > .divider-vertical { display: none; } .nav-collapse .nav .nav-header { color: #999999; text-shadow: none; } .nav-collapse .nav > li > a, .nav-collapse .dropdown-menu a { padding: 6px 15px; font-weight: bold; color: #999999; -webkit-border-radius: 3px; -moz-border-radius: 3px; border-radius: 3px; } .nav-collapse .btn { padding: 4px 10px 4px; font-weight: normal; -webkit-border-radius: 4px; -moz-border-radius: 4px; border-radius: 4px; } .nav-collapse .dropdown-menu li + li a { margin-bottom: 2px; } .nav-collapse .nav > li > a:hover, .nav-collapse .dropdown-menu a:hover { background-color: #222222; } .nav-collapse.in .btn-group { margin-top: 5px; padding: 0; } .nav-collapse .dropdown-menu { position: static; top: auto; left: auto; float: none; display: block; max-width: none; margin: 0 15px; padding: 0; background-color: transparent; border: none; -webkit-border-radius: 0; -moz-border-radius: 0; border-radius: 0; -webkit-box-shadow: none; -moz-box-shadow: none; box-shadow: none; } .nav-collapse .dropdown-menu:before, .nav-collapse .dropdown-menu:after { display: none; } .nav-collapse .dropdown-menu .divider { display: none; } .nav-collapse .navbar-form, .nav-collapse .navbar-search { float: none; padding: 9px 15px; margin: 9px 0; border-top: 1px solid #222222; border-bottom: 1px solid #222222; -webkit-box-shadow: inset 0 1px 0 rgba(255,255,255,.1), 0 1px 0 rgba(255,255,255,.1); -moz-box-shadow: inset 0 1px 0 rgba(255,255,255,.1), 0 1px 0 rgba(255,255,255,.1); box-shadow: inset 0 1px 0 rgba(255,255,255,.1), 0 1px 0 rgba(255,255,255,.1); } .navbar .nav-collapse .nav.pull-right { float: none; margin-left: 0; } .nav-collapse, .nav-collapse.collapse { overflow: hidden; height: 0; } .navbar .btn-navbar { display: block; } .navbar-static .navbar-inner { padding-left: 10px; padding-right: 10px; }}@media (min-width: 980px) { .nav-collapse.collapse { height: auto !important; overflow: visible !important; }}

Search Results

Search found 11124 results on 445 pages for 'optical drive'.

Page 445/445 | < Previous Page | 441 442 443 444 445

- by TedMcLaughlan

- by beagle

- by Vee

- by Nathan Jones

- by Casey Flynn

- by TK Kocheran

- by frankcheong

- by mseika

- by Shaun

- by EtherealMonkey

- by Rick Strahl

- by sico87

- by BarsMonster

- by zen

- by Casey Flynn

- by moon

- by John Magnolia

- by Bruno-P

- by Mike Curry

- by CT

- by raul.goycoolea

- by BuckWoody

- by numerical25

- by Renso

< Previous Page | 441 442 443 444 445