Search Results

Search found 15591 results on 624 pages for 'problems'.

Page 445/624 | < Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >

• Intel ICH9/10R raid 5 drive failure

  - by davpen

  About a year ago I was using the native Intel ICH9R Raid 5 an Intel P35 based motherboard. The system was running Vista x64 and when one of the drives failed Vista blue screened on boot until I had figured out which drive had failed and removed it (a rather nerve racking hit and miss affair). The same thing happened some months later on another similar system so it wasn't a once off. This wasn't the robust raid 5 drive failure behavior that I would have hoped for and expected. I moved to Highpoint Rocketraid 2300 and haven't had any problems although I have yet to have a drive fail with this set up. But I am now looking to build a new system based on an i7 and Windows 7. At the moment Highpoint doesn't have drivers for Windows 7 so I am considering moving back to the on board Intel Raid. Yes I know I that I might get away with using the Vista drivers but I don't really want to take that chance with critical data. The question then is has anyone else experienced a drive failure with Intel raid and how did the OS and drivers handle it? Is it safe to go back?

  Read the article

• Warning messages while build Apache server

  - by GoinOff

  I am building Apache server 2.4.6 from source and am not sure about a few warning messages I received during the rpm build process. The build completes OK and everything seems fine..BTW, this is on CentOS 5.5... During the make process: /home/johnm/dev/project1/install/linux/BUILD/httpd-2.4.6/srclib/apr/libtool --silent --mode=install install mod_authn_file.la /home/johnm/dev/project1/install/linux/tmp/usr/local/apache2/modules/ libtool: install: warning: remember to run `libtool --finish /usr/local/apache2/modules' What is this warning message about?? remember to run libtool --finish ?? Also, I see this: libtool: install: warning: `/home/johnm/dev/project1/install/linux/BUILD/httpd-2.4.6/srclib/apr-util/libaprutil-1.la' has not been installed in `/usr/local/apache2/lib' I am building Apache in a temp directory but libtools seems to be looking in the wrong place (/usr/local/apache2/lib instead of /home/johnm/dev/project1/install/linux/tmp/usr/local/apache2/lib). This seems like something I can blow off?? In my specfile I set DESTDIR to /home/johnm/dev/project1/install/linux/tmp where the install files are placed: %install export DESTDIR=%{buildroot} make install Both messages appear numerous times during the make process. When I install the rpm on the system, everything appears to work without problems..Thinking I can ignore these messages??? or am I missing something important??

  Read the article

• All applications quit when printing on imac OS X 10.5.8

  - by Tamany

  I recently ran a software update. I'm not sure if my problems are associated with this but I'm pretty sure they are as I printed successfully before update. I checked the log at time of printing: 03/05/2010 22:03:15 Microsoft Word[697] *** -[NSCFString _getValue:forType:]: unrecognized selector sent to instance 0x17a82b50 03/05/2010 22:03:15 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:17 [0x0-0x51051].com.microsoft.Word[697] Mon May 3 22:03:17 leopards-imac-2.local Word[697] <Error>: The function `CGPDFDocumentGetMediaBox' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance. Please use `CGPDFPageGetBoxRect' instead. 03/05/2010 22:22:09 Microsoft Word[697] *** -[NSCFString _getValue:forType:]: unrecognized selector sent to instance 0x1b036500 Any thoughts on how to fix this?

  Read the article

• NAT vs public IP (and blocked ports)

  - by user1646166

  I have a problem with my ISP. They say that they don't block any ports and I have public IP, while I think these both statements are false. Before I talk to them again (which is really tough when my understanding of these terms is different than theirs) I would like to make some things clear. It seems like my computer is behind NAT (is it possible to have public IP and be behind NAT at the same moment?). When I check my IP, through some external server, and type that IP into browser I get a home page of some router (not mine). Isn't that a proof that my IP isn't public? Also, I have problems with making connections via some ports. E.g. when I'm trying to connect through some high port ( 1023) via SSH, it doesn't work. Is it possible that certain range of outgoing ports from my computer are blocked? Or is it simply because that my ssh client (PuTTY) can't receive incoming packets because of blocked incoming ports? To avoid some questions: it's not a problem with my router, I tried connecting my PC directly and it also didn't work, while having connected by 3G using phone with USB tethering, it does work. Thanks!

  Read the article

• Hyper-v on 2012R2 startup gen1 vm causes the host to freeze up

  - by sputnik

  I've searched a lot to resolve the following issue, but nothing helped me. My problem is, that starting up a first-gen vm locks up the whole host. Only a hard reset helps. Second-gen vm starts and runs perfectly. The freezes happened on 3 different vms. FreeBSD, Ubuntu, Windows Server 2008R2, while Windows 8.1 on second gen config works perfectly. Im using this pc mainly as a workstation. No eventlog errors nor dumps are generated. My system: Windows Server 2012R2 FX-8350, non OC ASRock 870 Extreme R2 (Crappy board imho) 32GB DDR3 1866@1600 (My motherboard, against the "support" for 1866ram won't work with full speed) 120GB SSD 4.5TB Storage space device I dont think that its due to my system, because vmware workstation was running without problems. Did I forget to configure something? Any help is appreciated. P.S: Even deactivating C1E, C6, C&Q didnt work. P.P.S: With no virtual network adapter set, the system still locks up. Creating a first gen vm without any hdds and network and launching works. Attaching a boot dvd causes the host to freeze. The host freezes as the gen1 vm begins to boot, doesn't matter if from dvd or hdd

  Read the article

• Netgear FVS336G: appropriate solution for today's small businesses?

  - by bwerks

  Hey all, I've been looking into a routers to facilitate a vpn solution for a small business. While the Netgear FVS336G looks good on paper, it appears to have some fairly crippling setbacks that drag down what appears to be some great hardware. First off, the unit has been around for a couple years now, perhaps before 64-bit operating systems were as common as they are now, and complaints are everywhere that claim that SSL or IPsec (or both) VPN connections will not work with 64-bit operating systems. However, most of these claims mention only Vista, which makes me think that these problems could have potentially been solved since then. Unfortunately though, Netgear's support forums seem to be incredibly private, and policed by some troll named jmizuguchi who just closes down public posts in order to marshal them into the private ones. Danger, will robinson. Apparently their firmware upgrade process is a nightmare too, but that's beside the point. My question is this: has anyone configured one a Netgear FVS336G to operate in a server 2008 (or R2)/windows 7 64-bit network? If so, is it possible to use the microsoft vpn client or are third party clients still required? If this thing has just failed the test of time, is there a feature-comparable unit that I've missed, at anywhere near the same price range? Thanks!

  Read the article

• Which HDD brand do you ..trust

  - by Shiki

  Okay it says its 'subjective' but I believe it's not. Basically I want to ask the community about your preference. Not really 'preference' but actual experience. Like if you never had a problem with Western Digital, then write that in an answer, or if there is one with WD, just vote it up. And so on. (Heard so many stories, experiences. I only had Samsung, Maxtor, WD, Seagate HDDs. Samsung died with bad blocks, had anomalies. Maxtor died so fast I couldn't even try it really and it's really hot, loud. Seagate is just as loud as a jet plane, and moderately hot. My WD (green) is quiet, really cool and somewhat fast. That's all I have about experiences. So I would say Western Digital in an answer (OR Hitachi. Never had one yet, but every expert I know says I should get one since they even had problems with WD but Hitachi seems to be ok. (My laptop comes with Hitachi hdd but I don't think its really relevant.)) Basically I mean desktop 7200RPM HDDs here. Well.. notebook HDDs are ok also, but no raptor/scsi/server ones. Hope you get what I meant and it won't get closed.

  Read the article

• Create a partition table on a hardware RAID1 drive with [c]fdisk

  - by Lev Levitsky

  My question is, is there a reason for this not to work? Details: I have two 500 Gb drives, and my motherboard RAID support, so I created a RAID1 array and booted from a Linux live medium. I then listed the disks and, apart from the obvious /dev/sda, /dev/sdb, etc. there was /dev/md126 which, I figured, was the mirrored "virtual" drive. Its size was 475 Gb; I had seen that the size of the array would be smaller than 500 Gb when I was creating it, so no surprise there. I did cfdisk /dev/md126, created the necessary partitions and chose write. It's been about half an hour now, I think. It doesn't seem like it's ever going to finish. The only thing about cfdisk in dmesg is that it's "blocked for more than 120 seconds". Doing fdisk -l /dev/md126 in another terminal I see all three partitions I created and a note that "Partition 1 does not start on a physical sector boundary". The table is lost after reboot, though. I tried to partition /dev/sda individually, and it worked, the table was written in about a second. The "not on a physical sector boundary" message is there, too. EDIT: I tried fdisk on /dev/sda, then there were no messages about sector boundaries. After a reboot, I am able to use mkfs on /dev/dm126p1, etc. fdisk shows that /dev/md126 has the same partitions as /dev/sda (but /dev/sdb doesn't have any). But at some point ("writing superblock and filesystem accounting information") mkfs is also blocked. Using it on sda1 results in a "partition is used by the system" error. What can be the problem? EDIT 2: I booted a freshly updated system from a pendrive and was able to create partition table and filesystems on /dev/md126 without any apparent problems. Was it an issue with the support of the hardware? My MB is Asus P9X79.

  Read the article

• Delete ARP cache on Mac OS when moving from one Wifi network to the other

  - by Puneet

  I am facing wireless connectivity problems when I move from one Wifi network to the other. Here is how it happens: I am at my friends place. I connect to his Wifi. His Wifi router ip address is 192.168.0.1. Everything is fine I close my laptop, come back to my house, open my laptop and I connect to the Wifi Network at my place. Different ESSID, but the Wifi router address is the same 192.168.0.1. At this point I cant get to anything on the internet. To debug I try to see if I can ping the router (192.168.0.1), I cant. I get a no route to host. Meanwhile airport tells me Im connected to Wifi. I see the arp cache and I see a permanent entry for 192.168.0.1 ? (192.168.0.1) at 5c:d9:98:65:73:6c on en1 permanent [ethernet] This permanent bit looks problematic. I go ahead and delete the arp cache entry and all is fine with the world until I go back to my friends place where the same situation plays out. Now my question is, why the hell is this happening? If there is no way around it, can I run a script on Wifi connect/disconnect to clear out the arp cache? Im using Mac OS X $uname -a Darwin 10.8.0 Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386 i386

  Read the article

• Disk Partitioning problem with fdisk.

  - by MA1

  Currently i am using fdisk to create/resize windows partitions. Following is a sample input script to fdisk to create/resize windows partitions: fdisk /dev/sda < partInput the contents of partInput are as follows: d #delete the partition 3 #partition number to be deleted n #add a new partition p #primary: type of new partition 3 #new partition number 18804 #start cylinder of new partition 77433 #end cylinder of new partition t #change the type of partition 3 #partition number whose type(filesystem) is to be changed 7 #HPFS/NTFS: partition type(filesystem) n #add a new partition p #primary: type of partition 77434 #first cylinder of new partition 77825 #end cylinder new partition w #write all the above changes As you see in the above input we are using cylinders for start and end. Earlier i am using sectors as unit and everything is working fine but getting problems when partitioning a 1.5TB hard drive. Then i changed the unit to cylinders but it is working on some machines not all. On some machines fdisk failed to create the partition table correctly. So, i am thinking to move to parted if there is no way to do the above using fdisk. Please also tell me how to correctly convert sectors to cylinders? How to perform all the above steps using parted without losing the data OR how to use fdisk correctly?

  Read the article

• Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

  - by Bluebill

  I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: fsck from util-linux-ng 2.16 There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots?

  Read the article

• Moving a lotus database causes incoming mail failure

  - by Logman

  Hey all, I moved a couple lotus note databases to another hd (ran out of space) by using a directory link/pointer on the domino server. USed a text file with the .DIR ext with the desired new path etc... well that works fine. I open up a lotus notes client, use the id and then OPEN the database. The directory link works fine, the new location of the db is opened with no problems. We found out that we couldnt FORWARD any mail: We did the following to make it work: Goto menu FILE|MOBILE|EDIT CURRENT LOCATION Goto tab MAIL and enter the correct path for "Mail File:" example: it should read "mail\morespace\flabor" and not "mail\flabor" "morespace" = directory link/pointer we can forward and reply to emails fine after that fix. The problem is that the user has no incoming email. Domino is still trying to send the incoming mail of that user to its old db location "mail\flabor" instead of "mail\morespace\flabor". Delivery error saying user does not exist. Is this a cache problem? We have reset the server ("Q" at the prompt), though we have not completely shut it down though. Thanks Frank

  Read the article

• Motherboard running rather hot while gaming

  - by I take Drukqs

  Case: Antec 1200 Mobo: Gigabyte GA-X58A-UD3R CPU: Intel i7 950 (stock cooler) GPU: EVGA GeForce 570 GTX RAM: 2x 2 GB (4 GB total) DDR3 dual-channel Corsair OS: Windows 7 Home Premium 64-bit This is my first build and it's brand new. I had no problems putting it all together in a few hours one evening and I consider myself to be pretty good with computers. Not to brag or anything like that! Just saying I've been fiddling with them since I was in diapers and I have a good amount of experience under my belt, just not with certain things yet. Recently while playing many of the latest games maxed out without a hitch my motherboard has been running hot and like anyone who's ever built a computer it scares the life out of me. I checked HWMonitor and saw that my motherboard sometimes reached temperatures of around 52 - 78c (the number 78 obviously being what's scaring me). I was wondering if such a temperature is normal and if not what the problem could be. Air flow in my case is phenomenal and besides having to ship back a faulty GPU and reseat my CPU my first build has been a very large success which I am enjoying tremendously. There is literally almost no dust in my case due to it being very new as previously mentioned and my RAM sticks are in the correct slots for dual-channel mode. My cable management is pretty great in my opinion with only cables from my PSU lingering in the bottom of the case. At any given opportunity I ran my cables behind my mobo. Air flow should definitely not be a problem because my CPU only goes up to about 60c and my GPU only goes up to about 80c. Thank you very much in advance.

  Read the article

• Logitech QuickCam Pro 9000 & Windows 7 64-bit failing miserably

  - by Saxtus

  I am trying to install a Logitech QuickCam Pro 9000 webcam to Windows 7 64-bit. If I do it without using the Logitech drivers but instead the Windows Update ones, the camera works with low frame rate and without face tracking and all other bells and whistles that it's full driver provides. The moment I install the latest official Logitech driver, the problems begin: Camera works fine, until I decide to go to audio settings of the LWS panel or Windows'. Then LWS freezes and with it everything that tries to output audio. I am not able to open Playback/Recording devices window (it just doesn't appear) and system gets unstable and slow with LWS.EXE process not been able to close forcefully. If I reboot and forget the camera connected, this situation continues and system gets unstable from the beginning. If I reboot without the camera connected, everything works fine until I connect it and try to do something with audio settings of Windows or LWS panel. I should note, that until the freezing occurs, camera works as expected, with full frame rate, face tracking and everything that is expected to do. The soundcard is the ASUS SupremeFX II of the ASUS Striker II Extreme motherboard. Any ideas of what is causing this or what else to try so I can make it work as advertised? Thank you.

  Read the article

• Affordable combined Ruby/Rails/Redmine + Subversion hosting?

  - by Pekka

  I'm a self employed web developer and after nine years of hard work, I'm looking to become a bit more "vagrant" starting next year, do some much-needed traveling and a bit and work off and on, making use of one of the greatest advantages of a programming job: The ability to work virtually from everywhere. For that, I am looking for a reliable hosting company I can entrust my code to in the form of a number of Subversion repositories, and an installation of the Redmine project management tool. As my financial situation may vary during traveling, I am looking for something I can pay up front for a year or two, and is obviously not too pricey. I don't care where the company is located, as long as it's trustworthy and solid, meaning it's not likely to go out of business next month. Does anybody know good recommendations? Preferably from own, personal, good experience. I have looked at CVSDude / Codesion and while they are certainly great, they don't offer Redmine of course, and seem to be aiming toward bigger organizations mainly. What I would need: 2-5 Gigs of space minimum, freely distributable between SVN, and Redmine attachments Unlimited number of Subversion projects Access control (team members / checkout-only accounts / etc.) I don't mind configuring the svn settings on file basis myself I need the possibility to map a custom domain to the package that is hosted elsewhere Frequent backups and access to those backups through FTP or other means I have been running my own virtual server for this until now, but I don't want the hassle, especially on the security side, while I may not always have the internet connection to fix problems that may come up.

  Read the article

• Is there a way to run CUDA applications with the CUDA device being a secondary adapter?

  - by Slartibartfast

  I've been trying to run a CUDA program on a remote computer which has Windows 7 installed. The GPU is GeForce GTX 480. One of the problems I've been facing is that, the computer has two adapters, 1) Standard VGA Adapter 2) NVIDIA GeForce GTX 480 Even though this shows in the device manager. The desktop uses the standard VGA Adapter. I'm assuming this is because the Standard VGA is the primary adapter. Also the device manager shows that the monitor is connected to the standard VGA Adapter. In this scenario if i try to run any CUDA application it fails to recognise a CUDA capable device. Is it necessary for the NVIDIA adapter to be the primary one? Or is there any way to use CUDA when the graphics card is a secondary adapter. I've seen a few posts in the NVIDIA forums on this before, one suggests using another low cost NVIDIA card as the primary adapter, but that is currently not an option. I couldn't find any other solutions. Thanks I tried running the deviceQuery test from the NVIDIA GPU Computing Samples. This was the result i obtained CUDA Device Query (Runtime API) version (CUDART static linking) cudaGetDeviceCount FAILED CUDA Driver and Runtime version may be mismatched FAILED The driver version I'm using is 263.06. The CUDA version is 3.2 I ran the same test on my desktop which also has windows 7 and a GeForce GTX 465. The CUDA toolkit version is 3.2. The driver version was the same and the test passed, although it failed with an older driver.

  Read the article

• Completely remove and freshly install MySql on XP?

  - by Corey Ogburn

  I have read this question and have not found it as a solution and I have even attempted much more. I've uninstalled MySql 5.5.18 and deleted: C:\Program Files\MySql C:\Documents and Settings\All Users\Application Data\MySql After uninstalling, I restart the computer. When I reinstall, in the MySql Server Instance Configuration Wizard I leave everything to their defaults except: I add a firewall exception I check Launch MySQL Server Automatically I check Include BIN directory in windows path Enable root access from remote machines (I'll lock that down later, just debugging for now, I have also tried installing without this option to no avail) I've tried Typical and Complete while installing, as well as with and without strict mode. No combination shows a difference. After all this, it cannot Apply Security Settings and I get a 10061 error (it also said error number 2003) and this article didn't help. I've tried everything I can to completely uninstall and successfully reinstall so I can start from scratch. I've uninstalled and reinstalled about a dozen times with minor changes (including turning off the firewall at times), each time deleting the above folders and any proper registry entries with no success. Note by success, applying security settings and a working remote connection. I can connect locally every time, but it's remotely that counts. I have tried to look for exterior problems such as port forwarding in the router and (even though the installer should add it) I do double check the firewall settings, which have always allowed the default port. I'm out of ideas.

  Read the article

• Cannot find wireless driver for HP laptop

  - by rodey

  I have an HP laptop (model: dv7-1267cl, Windows 7 64-bit Home Premium) and I cannot find the wireless driver for the laptop. I am need of a different version because my wireless connection under Windows is flaky and unreliable. I have problems printing to my wireless printer and logging in to and using several sites like reddit.com, phoenix.edu and facebook.com - I get several "page cannot be displayed" messages while using my wireless connection. I disable my wireless adapter and use an ethernet cable and it all works fine. I also used an Ubuntu Live CD to confirm that there is not a problem with the hardware. This is software/driver issue. The drivers were auto installed by the OS. The Device Manager shows the wireless adapter as Atheros AR5009 802.11 a/g/n WiFi Adapter. I have checked the HP website for my laptop and they do not have wireless drivers listed for that model wireless adapter. I have also checked with atheros.com and I do not see my model adapter on their list of available hardware. Device Manager lists the Hardware ID's for my adapter as: PCI\VEN_168C&DEV_002A&SUBSYS_1381103C&REV_01 PCI\VEN_168C&DEV_002A&SUBSYS_1381103C PCI\VEN_168C&DEV_002A&CC_028000 PCI\VEN_168C&DEV_002A&CC_0280 A search for the first Hardware ID turned up this question from experts-exchange.com. tl;dr A driver does not exist for that model adapter.

  Read the article

• File Replication Service Errors

  - by ekamtaj

  Hey Guys, We have a windows 2003 r2 server and couple of the users are reporting that they can not scan files into the windwos server. They are getting an Out of Space errors. I took a look at the server and we have 600GB free disk space on that partition. But while looking at the event log I found a lot of errors like (13552,13555) The File Replication Service is unable to add this computer to the following replica set: "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" This could be caused by a number of problems such as: -- an invalid root path, -- a missing directory, -- a missing disk volume, -- a file system on the volume that does not support NTFS 5.0 The information below may help to resolve the problem: Computer DNS name is "server.domain.local" Replica set member name is "server" Replica set root path is "c:\windows\sysvol\domain" Replica staging directory path is "c:\windows\sysvol\staging\domain" Replica working directory path is "c:\windows\ntfrs\jet" Windows error status code is FRS error status code is FrsErrorMismatchedJournalId Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Windows Domain Chaos - Any Solving Approach

  - by Chake

  we are running an old Window 2003 Server as Domain Controller (DC2003). To safely migrate to Windows 2008 R2 we added a 2008 R2 (DC2008R2) to the domain as domain controller (adprep etc.). After dcpromo on DC2008R2 everything seemed to be ok. The new DC appeared under the "Domain Controlelrs" node. It wasn't checked at this time, if DC2008R2 can REALLY act as domain controller. Later we tried to shutdown DC2003 and ran into a total mess with non functional Exchange and Team Foundation Services. After that I got the job to fix... First i thought it could be an Problem with DC2008R2. So I removed it as Domain Controller and installed a new Windows 2008 R8 Server DC2008R2-2. I ran into similar Problems. I tried a bunch of stuff, but nothign helped. I won't list it, maybe I made an mistake, so I'm willing to redo it with your suggestions. To have a starting point I tried the best practise analyser whicht ended up with 24 "Compatible" and 26 "Not Compatible" tests. From these 26 tests 19 read the same. (I'm translating from german, so that may to be the exact wording) Problem: Using the Best Practise Analyser for Active Directory Domain Services (Active Directory Domain Services Best Practices Analyzer, AD DS BPA) no data can be be gathered using the name of the forest and the domain controller DC2008R2-2. I appreciate any suggestions, this really bothers me.

  Read the article

• Why would my wireless cut in and out every minute or so?

  - by Strilanc

  I've been having problems with my wireless. I moved to a new apartment, and the wireless seems incredibly unreliable. Sometimes it will be stable for hours until, all of a sudden, it starts cutting in and out. I'll get 30-90 seconds of normal behavior, then 5-30 seconds of nothing, then repeat. Sometimes the connection will stop working entirely, until I power-cycle the router. It is extremely, extremely annoying. Surfing the web isn't too bad, assuming you can stand the random 5-30 second waits. But some connections are sensitive enough to timeout, and it certainly makes multiplayer games unplayable. Facts: I confirmed the problem using ping google.com -t. I get normal traffic, interspersed with bursts of "Request timed out.". I've never had this problem before with this laptop. I didn't bring my own router or modem to the apartment. I'm using what the old tenant had. Hooking directly to the modem via an ethernet cable results in a stable connection. Temporarily cutting power to the router sometimes fixes the problem. Sometimes it doesn't. I reset the router, but the problem remained. Apparently the previous tenant had issues with the internet, but I don't know what they were specifically. The router is a D-Link DIR-615, and their tech support is useless.

  Read the article

• illegitimate traffic from user agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.10) Gecko/2009042316 Firefox/3.0.10 (.NET CLR 3.5.30729)

  - by user114293

  Since the beginning of the year, I'm getting a lot of traffic with the user agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.10) Gecko/2009042316 Firefox/3.0.10 (.NET CLR 3.5.30729). My access logs show 40% - 60% from that user agent. That's strange because the user agent states a Firefox 3.0.10 browser (is anybody using that browser in 2012? Definitely not 40%-60% of visitors on a normal website). Also, the logs show that this user agent only requested the HTML document and no referenced assets like images, css, js files. I checked the IPs of those requests (with that UA). It's coming from all over the world. I recognized that those IPs sometimes have a mobile user agent. So my suspicion is a mobile app that is doing a lot of "spider requests" - but if that would be the case than other web sites should have the same problem. That's actually my question: Does anybody experience same/similar problems?

  Read the article

• Plone site randomly serving wrong content

  - by Chris Miller

  I have a Plone site that has begun to randomly serve up the wrong content. Any given content suddenly shows something else. Sometimes a JPEG loads a stylesheet instead or a stylesheet loads as a page or a page as an image. The images move around, some times our site logo shows a bullet, or one of the other site images. Fiddler shows the wrong content in the response, the apache logs show the content type of the incorrect file (so if the an image loads in place of a style sheet, apache shows that). We thought mod_proxy was the source of our grief, but we get the problem hitting Zope directly. I never get the wrong content using the Medusa Monitor to repeatedly hit the content. I do see ConflictErrors in the instance.log file, and they seem to be correlated to the problem, but not 100%. ZPublisher.Conflict ConflictError at \path\to\object: database conflict error (oid 0x3586, class BTrees._OIBTree.OIBTree, serial this txn started with blah, serial currently committed blah) (X conflicts (0 unresolved) since startup blah) I pulled that off the web, it's not from our logs, but it's the same message. This may be a red herring, it sounds like those messages are normal. We've updated to the 3.3.5, same problems. I'm at a loss. I'm wondering if there a good way to intercept what is being served? Secondly, is there a way to increase the verbosity of the access log to included the content-type? I've even seen the problem manifest in ZMI. It happens more often when we're authenticated. Sometimes it can take a thousand reloads to see the problem, other times it happens in different ways every time we reload. I believe we've seen this problem for a couple years, but it was very intermittent, a page would show the content of a GIF, then a reload later wouldn't happen for a long time. Now it's a huge problem.

  Read the article

• Network access lags for Win7 when server network utilization is high

  - by Jeff Miles

  We have a Dell PE2950 file server running Windows 2008, hosting a DFS namespace of ~1.2 TB. This server has two Broadcom 1Gbps NICs teamed together. When there is high traffic going to the server across the network (greater than 200 Mbps), any Windows 7 client accessing a DFS share at the time experiences severe performance problems. For example: Computer A has an AutoCAD drawing opened directly from the DFS share. Performance is normal, not causing any issues. Computer B begins a file transfer, putting a 11GB file onto a different DFS namespace, on the same server Computer A immediately notices lag while using AutoCAD. The cursor momentarily freezes within AutoCAD every 10 seconds or so, and any browsing of the DFS share is extremely slow. Computer B completes file transfer, and performance resumes to normal for Computer A. This is only affecting Windows 7 clients, using a variety of hardware (desktop + laptop). All of our Windows XP clients see no performance impact during the file transfer. Things I have tried with no change: Had Computer A work from an entirely different RAID array from the file transfer destination Updated NIC drivers on clients and server Enabled TCP offload and receive side scaling on the server NIC (previously disabled when the issue began) Antivirus disabled during file transfer I am currently having a user test applications other than AutoCAD when the file transfer occurs, and will update the question with that result. Does anyone have any recommendations for resolution or additional troubleshooting steps?

  Read the article

• Clustering filesystem for small files

  - by viraptor

  Hi, I'm looking for a distributed filesystem which I could use for storing lots of small files (<1MB usually). What I want to get is: 2 servers which have the fs mounted themselves and mirror the data locking support (among reachable nodes) some kind of best-effort automatic resynchronisation after one node goes down and comes back again What I mean by the resync is that, I'm ok with both servers doing read/write operations even if they split-brain. I'm also ok if a local process obtains a lock if the other host is not reachable. From the resync I expect only a file-level consistent view after a while - that is - if file x is modified on both nodes during a split-brain, I don't really care which one is available after they join again, as long as it's full file, not one block coming from node1 and another block from node2. Is there a solution like that out there? I see that gluster has some problems with file locks (even in 3.1). I also noticed that OCFS2 will panic if both nodes split-brain. What other filesystem would allow me to do what I want?

  Read the article

< Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >