Search Results

Search found 13867 results on 555 pages for 'avoid learning'.

Page 447/555 | < Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >

• Recommended Win2k8 Server software to fix my RAID-0 issue

  - by Jason Kealey

  I'm running an Asus P6T V2 Deluxe. It has six SATA ports and supports onboard RAID. I am using two of those ports for a RAID0 array of 1.5TB Seagate drives using the onboard RAID controller. One of them is giving me SMART warnings and I want to preemptively replace it. I pulled out two other 1.5TB drives from another computer and am ready to use one or both, if necessary. I can't run any SMART diagnostic software from within Windows because it only sees the hardware RAID-0 array, not each individual drive. The first thing I tried was a slow sector-by-sector copy using a free tool called EASEUS Disk Copy. Used the bootdisk, copied (took like 16 hours), unplugged the defective drive and plugged the new one in its place. The motherboard didn't recognize the new drive as being part of the known setup, so it did not want to boot. The second thing I tried was using other software (I forget the name) to copy the partition from within Windows. The first software failed because I had a server operating system. I found another software (I forget the name) which supported a server OS and did a partition copy onto the new drive. This seemed to work and the OS started to boot, but blue screened and started a reboot cycle. I'm assuming the software I was using was no good as it was trying to copy the boot disk while it was in use. I am looking for recommendations on what software to use to fix my problem without doing a re-install. Everything is backed up but my computer works fine and I'd like to avoid re-installation when possible. However, my system would be back up now if I had just started over on a second RAID array. :)

  Read the article

• iCloud backup merges or overwrites?

  - by Joe McMahon

  The following happened today (it was six AM my time, so yeah, I was dumb and dropped stitches in this process): A friend had a problem with her iPhone and needed to reset it. Unfortunately she did the reset while connected to iTunes and the restore process kicked in. In my sleepy state, I told her to go ahead. She did, and restored the most recent local (iTunes) backup (from July last year - she doesn't back up often, as she has an Air which is pretty full). During setup on the phone, she was prompted to merge data with the iCloud copy, and did so. There was no "restore from iCloud" prompt. Obviously I should have made sure she was disconnected from iTunes before she did the reset, or had her set it up as a new device and then restored from iCloud, but water under the bridge now. (Side question: could I have had her disconnect and then restart the phone again and avoid this whole process?) The question is: was the "merge" that happened in this process a true merge, or a replace? Her passwords for Mail were wrong, since they were the old ones from the old backup. If she does the wipe data and restore from iCloud, will she get her old SMSes and calendar entries back? Or did the merge decide that the phone, despite it being "old" was right and therefore the SMSes, calendar entries, etc. were discarded? As a recovery option, I have a 4-day-old iTunes backup here from ~/Library/Application Support/MobileSync/Backup, but she and the phone are 3000 miles away, and it's 8GB, so I can't easily restore it for her. I do have the option of encrypting it and mailing it on a data stick if the iCloud backup is now toast. Should she try the wipe and restore from the cloud (after backing up locally), or should I just get the more-recent backup in the mail? My goal is to get everything (especially the SMSes) back to the most recent version possible.

  Read the article

• A web app provider has asked for specific browser config

  - by Matthew

  They have asks to turn off caching on our browsers. I was aghast that they would ask such a thing. I said to them; To avoid caching it is best practice to use; <meta http-equiv="pragma" content="no-cache" /> <meta http-equiv="cache-control" content="no-cache" /> This should work across all browsers. Their reply was; We need to refresh javascript at runtime, this will not help us – any more ideas? I replied; Unsure what you mean by “refresh javascript at runtime”. If you are using ajax, browser caching can effect the XMLHttpRequest open method. Adding these meta tags to the source has fixed this for me in the past. Browser caching only caches resources, it should have no effect on site scripting. These meta tags will bypass browser caching. This is a reasonable request, isn't it?

  Read the article

• How to display/define Mirror/Stripping pairs with mdadm

  - by Chris

  I want to make a standard linux software Raid10 over 4 HDD. The server has 4HDDs, 2 pairs from different vendors in order to avoid batch problems. I want to have the mirror over two different Vendors, and then the Stripe over the mirror pairs. I could do that by manually creating Raid1/0, but mdadm supports Raid level 10. I just cant figure out how the Raid10 is then handled and how the data is distributed. mdadm --detail /dev/md10 /dev/md10: Version : 1.2 Creation Time : Wed May 28 11:06:23 2014 Raid Level : raid10 Array Size : 1953260544 (1862.77 GiB 2000.14 GB) Used Dev Size : 976630272 (931.39 GiB 1000.07 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Wed May 28 11:06:23 2014 State : clean, resyncing (PENDING) Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : near=2 Chunk Size : 512K Name : pdwhost:10 (local to host pdwhost) UUID : a3de0ad5:9e694ee1:addc6786:c4449e40 Events : 0 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 81 1 active sync /dev/sdf1 2 8 97 2 active sync /dev/sdg1 3 8 113 3 active sync /dev/sdh1 does not really give any information about that. How it should be: Raid 1 / Mirror over /dev/sda1 /dev/sdf1 and /dev/sdg1 /dev/sdh1 Raid 0 over the two Raid 1 pairs Is it possible to do that with the built in "level=10", how can I see what pairs are mirrored? Thanks a lot for you help

  Read the article

• How to turn off Windows Azure's "This copy of Windows is not genuine" message?

  - by Sid

  Is there any setting/configuration item to avoid Windows Azure from printing that error on the screen or detecting it? I've put a screenshot below that shows the message when you RDP into the web role. My web role runs on Windows Azure Guest OS 1.17 (variant of Windows Server 2008 SP2) Background: I was explaining our architecture to some outside engineers (NDA'd and all) and had to demystify the webrole as they were unfamiliar with Azure. I RDP'd into the VMs running the Web Role when one of their engineers gasped "are you guys running pirated copies of Windows in the cloud?" I also noticed that within the RDP screen, the Azure machines had "This copy of Windows is not genuine" on the bottom left corner. Now obviously, Microsoft is running their own OS in their own datacenter with no influence from me. So no 'piracy' here, despite that obvious warning. However, they seemed so distracted by this ("how can it be? really? hmmm?") that we wasted more time talking about it than the actual matter at work. Like I said, they have little exposure to Azure but have value add elsewhere. I want to get rid of this so I don't have to explain this in the future. PS Microsoft: If you're going to modify Windows Server <XYZ> into Windows Azure <A.B> , you should also modify the code that verifies product integrity.

  Read the article

• Utility to grant admin rights to a user in Windows XP for few hours/days?

  - by user15660

  I have two accounts on my windows xp home desktop. The default regular user is used for everything and the 2nd user which has admin rights is used only for installations. I do this to avoid malware infestations during web browsing and limited user account is guarding against online threats to a good extend but many programs refuse to run under limited rights like revo uninstaller. many installs i run from limited user by selectin "run as" from right click context menu of the .exe file. but some apps need admin rights for certain. I use "switch user" to go to admin mode and do the install/uninstall. but the admin user has none of my preferences bookmarks setup nor has my locate32 indexing done and ready for fast search Is there a utility which I can use "run as" login in administration login and use that to grant my limited user admin rights for a limited amount of period like few hours or days? Please help. I guess MS might have closed many doors of it for fear of exploitation of the API. are there any?

  Read the article

• Disable touch pad for mouse button region on new HP pavillion models?

  - by John

  i bought a new hp pavillion dv6 series laptop. the laptop itself is fine but it has the new hp touchpad mouse which i absolutely hate. its such a stupid problem to have with a computer. the left and right mouse buttons are, themselves, part of of the touchpad, meaning that if i tap the buttons without actually pressing them down, it registers the same way as the mouse pad (the cursor moves, tap to click activates, etc.) this is a major annoyance because it prevents you from operating the mouse pad with anything more than a single finger; if for example i use my right hand index finger to move the cursor using the touch pad and rest my left hand index finger on the left mouse button for more efficient mouse-ing, the mouse will react as if im trying to use 2 fingers to move it and it will either just sit there or will spaz out. the only way this works is if i keep the finger that is resting on the mouse button absolutely still, which is very difficult and, therefore, very annoying. also, even if i do abide by the arbitrary new decree of single-finger mousepad operation, i still have a problem because when i press down on the left or right click buttons, the mouse moves slightly, what with the buttons also being part of the touch pad and all. this would not be that hard to avoid except that they decided to also make the buttons much harder to press down. now whenever i go to click something, i press hard on the mouse button, causing my finger to slightly move or roll or flatten out a bit, causing the cursor to move slightly, and causing me to click on something different. what i would like to know is if there is anyway that i can disable the touch pad on the buttons. i have gone through all of the settings under the synaptics menus but i cannot find anything about this. did i miss something in one of the menus? if not, then are there any updated drivers that allow for toggling of this function?

  Read the article

• Datacentre Rack naming convention with flexibility for reassignment of server roles

  - by g18c

  We are just shifting across to a new rack and until now have used names of cartoon characters. This is not going to work anymore, and need a better naming convention. Physically i would like to name the servers by location, and then have an alias as to its actual function/customer, i.e. Physical name LONS1R1SVR1 meaning London, suite 1, rack 1, server 1 Customer Alias Since the servers can be reassigned from time to time, for the above physical server name, i would have an alias as a column in a spreadsheet, that would be set to the customers host-name, i.e. wwww.customerserver1.com Patching For patching, I am looking at labeling up the physically connections, i.e. LON1S1R1SVR1-PWR1 LON1S1R1SVR1-PWR2 LON1S1R1SVR1-ETH0 LON1S1R1SVR1-KVM Ultimately if i am labeling cables, I really want to avoid putting LON1S1R1SQLSVR on any patch cord in case the server gets formatted and changed from a SQL server to a WWW server which would need to relabel all the patch cords also. In addition, throwing in virtual machines, i have got confused very quickly. I appreciated that it may be confusing having a physical host-name and customer alias. Please let me know what you run with and any other standards or best practices that i can follow?

  Read the article

• why won't php 5.3.3 compile libphp5.so on redhat ent

  - by spatel

  I'm trying to upgrade to php 5.3.3 from php 5.2.13. However, the apache module, libphp5.so will not be compiled. Below is a output I got along with the configure options I used. The configure statement is a reduced version of what I normally use. ========== './configure' '--disable-debug' '--disable-rpath' '--with-apxs2=/usr/local/apache2/bin/apxs' ... ** ** ** Warning: inter-library dependencies are not known to be supported. ** ** ** All declared inter-library dependencies are being dropped. ** ** ** Warning: libtool could not satisfy all declared inter-library ** ** ** dependencies of module libphp5. Therefore, libtool will create ** ** ** a static module, that should work as long as the dlopening ** ** ** application is linked with the -dlopen flag. copying selected object files to avoid basename conflicts... Generating phar.php Generating phar.phar PEAR package PHP_Archive not installed: generated phar will require PHP's phar extension be enabled. clicommand.inc pharcommand.inc directorytreeiterator.inc directorygraphiterator.inc invertedregexiterator.inc phar.inc Build complete. Don't forget to run 'make test'. ============= php 5.2.13 recompiles just fine so something is up with 5.3.3. Any help would be greatly appreciated!!

  Read the article

• Locked out of our Comcast Business Gateway for seemingly no reason

  - by Tyler

  A little backstory... Last fall we migrated our ISP from AT&T to Comcast at one of our offices. At that time, we received a new modem/router from Comcast and we configured everything to our liking. We've never really had very many issues with the router aside from having to restart it every once in a while. Here's the problem... About three months ago I changed the password on the router from the default. After that, I logged into the router several times to make changes with no issue. During May I logged into the router to add two new static routes, no problems. A week ago, I tried to log into the router and could not. I tried the non-default password that I changed it to, the default, anything and everything I could think of and no luck. I restarted the router on Monday thinking it may just be locked up, but after the restart it would still not let me log in. This router is at our other office about 2 hours from here and I want to avoid having to drive down there and reset to factory defaults, reconfigure, etc. Any ideas?

  Read the article

• Has my site been attacked?

  - by fretje

  This is about an online store based on Drupal 5. All of a sudden it didn't work anymore. Upon accessing the site, this error came up: Parse error: syntax error, unexpected '<' in /home/public_html/index.php on line 38 Upon further inspection I found the following two lines at the end of said index.php: <script type="text/javascript" src="http://blog.nodisposable.com:8080/Hibernate.js"></script> <!--7379ba6e55616ea66ac9d812fc0597ba--> After manually removing those 2 lines, the site seems to work fine again. But after more problems (with editing pages) were reported, I found out that actually all the *.js files are "infected". They all contain an extra line at the end: document.write('<s'+'cript type="text/javascript" src="http://blog.nodisposable.com:8080/Hibernate.js"></scr'+'ipt>'); Has this site been hacked? Upon googling for "blog.nodisposable.com", nothing interesting comes up. That site itself seems legitimate. It's probably hacked itself? Can anybody explain how this could have happened? What I can do to reverse this? And what I can do to avoid this in the future?

  Read the article

• Triple-Boot + 4 partition Limit

  - by dsimcha

  I just bought a new hard drive so that I could convert my XP-only machine into an XP-Ubuntu-Windows 7 triple boot machine. Since the drive is absurdly huge (1 TB) I wouldn't mind throwing ReactOS into the mix, too. I just found out that master boot records are limited to 4 entries, meaning 4 primary partitions. I had Windows XP set up on my old drive as a boot partition, a program files partition and a media partition. Since I really didn't want to install XP from scratch, I cloned this setup on my new drive. This leaves me one MBR partition entry for installing Windows 7, Ubuntu and ReactOS. I'd like to avoid having to install XP from scratch like the plague, partly because it's supposed to be a safety net in case things go wrong with my other OS's and because I've invested a lot of time getting it set up exactly the way I like it. Here are the options I've considered and why I don't like them: Install Windows 7 on my media partition. This would work, but I prefer to keep my media partition completely separate from any OS, so that I can reformat an OS partition without affecting my media partition at all. Use wubi or something to install Ubuntu in the same partition as something else. Again, this is brittle. Move all my media to a logical drive on an extended partition. Create another logical drive on this extended partition for Ubuntu. The problem here is that extended partitions are rather brittle--if you nuke one, it renders the rest useless. Just put the old drive back in my computer and run XP off it. Use the new one for the other OS's. The problem here is that the old drive is slower and uses extra power, generates extra heat, etc. Can anyone suggest any other possibilities that I may have overlooked?

  Read the article

• Serious 64-bit laptop

  - by Daniel Gehriger

  For the past couple of years, I have been using an IBM Thinkpad T60p for daily work (software development, desktop & embedded). I am extremely satisfied with this machine, due to its robustness. It also has a few features I depend on: a high resolution display: 15.0" TFT FlexView display with 1600x1200 (UXGA); excellent keyboard; decent graphics and CPU performance. Some of the software I develop benefits from larger amounts of RAM, and 3GB (Windows 7 32-bit) or 4GB (Windows 7 64-bit on T60p) are no longer sufficient. My customers run desktop computers with 20GB and more, and I need to have at least 8GB to at least be able to run reasonable test cases. So I'm shopping around for a new laptop, but I'm struggling to find anything that matches my requirements: must run Windows 7 64-bit Pro or higher; must support at least 8GB of RAM (more is better) high screen resolution! While I prefer 4:3 I can live with wide screen. But I really hope to find something with a vertical screen resolution similar to what I have now... portable, so < 16" but = 14" I realize that FlexView isn't available anymore, but I'd like to avoid a glossy screen if possible. decent (not more) graphics performance, ideally hybrid (I'm doing a lot of CAD, never games). good keyboard reasonable CPU -- but I'm still fine with my current Core 2 Duo, so that shouldn't be too complicated. The T60p fits all those requirements, except the 8GB of RAM. Can you help me find a current notebook that would match most of them? I don't mind changing brand. Thanks!

  Read the article

• How can I totally flatten a PDF in Mac OS on the command line?

  - by Matthew Leingang

  I use Mac OS X Snow Leopard. I have a PDF with form fields, annotations, and stamps on it. I would like to freeze (or "flatten") that PDF so that the form fields can't be changed and the annotations/stamps are no longer editable. Since I actually have many of these PDFs, I want to do this automatically on the command line. Some things I've tried/considered, with their degree of success: Open in Preview and Print to File. This creates a totally flat PDF without changing the file size. The only way to automate seems to be to write a kludgy UI-based AppleScript, though, which I've been trying to avoid. Open in Acrobat Pro and use a JavaScript function to flatten. Again, not sure how to automate this on the command line. Use pdftk with the flatten option. But this only flattens form fields, not stamps and other annotations. Use cupsfilter which can create PDF from many file formats. Like pdftk this flattened only the form fields. Use cups-pdf to hook into the Mac's printserver and save a PDF file instead of print. I used the macports version. The resulting file is flat but huge. I tried this on an 8MB file; the flattened PDF was 358MB! Perhaps this can be combined with a ghostscript call as in Ubuntu Tip:Howto reduce PDF file size from command line. Any other suggestions would be appreciated.

  Read the article

• Active Directory: Determining DN or OU from log in credentials [closed]

  - by Christopher Broome

  I'm updating a PHP login process to leverage active directory on a Windows server. The logging in process seems pretty straight forward via a "ldap_bind", but I also want to pull some profile information from the AD server (first name, last name, etc...) which seems to require a robust distinguished name (DN). When on the windows server I can grab this via 'dsquery user' on the command prompt, but is there a way to get the same value from just the user's login credentials in PHP? I want to avoid getting a list of hundreds of DNs when on-boarding clients and associating each with one of our users, so any means to programmatically determine this would be preferential. Otherwise, I'll know the domain and host for the request so I can at least set the DC portions of the DN, but the organizational units (OU) seem to be pretty important for querying data. If I can find some of the root level OU values associated with the user I can do a ldap_search and crawl. I browsed through the existing questions and found some similar but nothing that really addressed this, so my apologies if the obvious answer is out there. Thanks for the help.

  Read the article

• Command or tool to display list of connections to a Windows file share

  - by BizTalkMama

  Is there a Windows command or tool that can tell me what users or computers are connected to a Windows fileshare? Here's why I'm looking for this: I've run into issues in the past where our deployment team has deployed BizTalk applications to one of our environments using the wrong bindings, leaving us with two receive locations pointing to the same file share (i.e. both dev and test servers point to dev receive location uri). When this occurs, the two environments in question tend to take turns processing the files received (meaning if I am attempting to debug something in one environment and the other environment has picked the file up, it looks as if my test file has disappeared into thin air). We have several different environments, plus individual developer machines, and I'd rather not have to check each individually to find the culprit. I'm looking for a quick way to detect what locations are connected to the share once I notice my test files vanishing. If I can determine the connections that are invalid, I can go directly to the person responsible for that environment and avoid the time it takes to randomly ask around. Or if the connections appear to be correct, I can go directly to troubleshooting where in the process the message gets lost. Any suggestions?

  Read the article

• Certificates in SQL Server 2008

  - by Brandi

  I need to implement SSL for transmissions between my application and Sql Server 2008. I am using Windows 7, Sql Server 2008, Sql Server Management Studio, and my application is written in c#. I was trying to follow the MSDN page on creating certificates and this under 'Encrpyt for a specific client', but I got hopelessly confused. I need some baby steps to get further down the road to implementing encryption successfully. First, I don't understand MMC. I see a lot of certificates in there... are these certificates that I should be using for my own encryption or are these being used for things that already exist? Another thing, I assume all these certificates are files are located on my local computer, so why is there a folder called 'Personal'? Second, to avoid the above issue, I did a little experiment with a self-signed assembly. As shown in the MSDN link above, I used SQL executed in SSMS to create a self-signed certificate. Then I used the following connection string to connect: Data Source=myServer;Initial Catalog=myDatabase;User ID=myUser;Password=myPassword;Encrypt=True;TrustServerCertificate=True It connected, worked. Then I deleted the certificate I'd just created and it still worked. Obviously it was never doing anything, but why not? How would I tell if it's actually "working"? I think I may be missing an intermediate step of (somehow?) getting the file off of SSMS and onto the client? I don't know what I'm doing in the least bit, so any help, advice, comments, references you can give me are much appreciated. Thank you in advance. :)

  Read the article

• What are ways to prevent files with the Right-to-Left Override Unicode character in their name (a malware spoofing method) from being written or read?

  - by galacticninja

  What are ways to avoid or prevent files with the RLO (Right-to-Left Override) Unicode character in their name (a malware method to spoof filenames) from being written or read in a Windows PC? More info on the RLO unicode character here: http://www.fileformat.info/info/unicode/char/202e/index.htm http://en.wikipedia.org/wiki/Bi-directional_text Info on the RLO unicode character when used by malware: http://www.ipa.jp/security/english/virus/press/201110/E_PR201110.html Mirror link: http://webcache.googleusercontent.com/search?q=cache:KasmfOvbVJ8J:www.ipa.jp/security/english/virus/press/201110/E_PR201110.html+&cd=1&hl=en&ct=clnk You can try this RLO character test webpage: http://www.fileformat.info/info/unicode/char/202e/browsertest.htm The RLO character is also already pasted in the 'Input Test' field in that webpage. Try typing there and notice that the characters you're typing are coming out in their reverse orders (right-to-left, instead of left-to-right). In filenames, the RLO character can be specifically positioned in the filename to spoof or masquerade as having a filename or file extension that is different than what it actually has. (Will still be hidden even if 'Hide extensions for known filetypes' is unchecked.) The only info I can find that has info on how to prevent files with the RLO character from being run is from the Information Technology Promotion Agency, Japan website: http://www.ipa.jp/security/english/virus/press/201110/E_PR201110.html (Mirror link). They adviced to use the Local Security Policy settings manager to block files with the RLO character in its name from being run. Can anyone recommend any other good solutions to prevent files with the RLO character in their names from being written or being read in the computer, or a way to alert the user if a file with the RLO character is detected? My OS is Windows 7, but I'll be looking for solutions for Windows XP, Vista and 7, or a solution that will work for all those OSes, to help people using those OSes too.

  Read the article

• How to configure hostname for `apache22` package on FreeBSD?

  - by Eonil

  I'm configuring development & test FreeBSD machine on VM. I installed apache22 package and restarted. But the daemon does not started with this error: %apachectl start httpd: apr_sockaddr_info_get() failed for test.box httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName (13)Permission denied: make_sock: could not bind to address [::]:80 (13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs % My hostname is test.box. Because this is temporary test box, it has no real domain-name. But I used 2-level name to avoid long time waiting of sshd on booting. However, I searched web, and I modified /etc/hosts file like this (I didn't touches this file before): # This is original configuration #::1 localhost localhost.my.domain #127.0.0.1 localhost localhost.my.domain # New configuration ::1 localhost test.box 127.0.0.1 localhost test.box 127.0.0.1 test.box test Now apache fails with this error message: %apachectl start httpd: Could not reliably determine the server's fully qualified domain name, using test.box for ServerName (13)Permission denied: make_sock: could not bind to address [::]:80 (13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs % I don't know what's required now. Please let me know reason and solution of this error. ---- (edit) ---- The permission errors are caused from omission of sudo.

  Read the article

• Write once, read many (WORM) using Linux file system

  - by phil_ayres

  I have a requirement to write files to a Linux file system that can not be subsequently overwritten, appended to, updated in any way, or deleted. Not by a sudo-er, root, or anybody. I am attempting to meet the requirements of the financial services regulations for recordkeeping, FINRA 17A-4, which basically requires that electronic documents are written to WORM (write once, read many) devices. I would very much like to avoid having to use DVDs or expensive EMC Centera devices. Is there a Linux file system, or can SELinux support the requirement for files to be made complete immutable immediately (or at least soon) after write? Or is anybody aware of a way I could enforce this on an existing file system using Linux permissions, etc? I understand that I can set readonly permissions, and the immutable attribute. But of course I expect that a root user would be able to unset those. I considered storing data to small volumes that are unmounted and then remounted read-only, but then I think that root could still unmount and remount as writable again. I'm looking for any smart ideas, and worst case scenario I'm willing to do a little coding to 'enhance' an existing file system to provide this. Assuming there is a file system that is a good starting point. And put in place a carefully configured Linux server to act as this type of network storage device, doing nothing else. After all of that, encryption on the files would be useful too!

  Read the article

• Windows Server doesn't connect to a network share

  - by Dmitriy N. Laykom

  Windows Server doesn't connect to a network share. Network share is working. Blockquote Pinging 109.123.146.223 with 32 bytes of data: Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Ping statistics for 109.123.146.223: Packets: Sent = 3, Received = 3, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms net view \shareaddress Blockquote System error 53 has occurred. The network path was not found. When I connected the network share I observed this error message: Blockquote \ "Mapped disk letter" refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location The network share was mounted via Group Policy. Perchance anyone knows how I can avoid this error? When the OS has been restored from the disk problem has been solved

  Read the article

• Why am I experiencing random connection timeouts? (CentOS)

  - by Ryan

  I have a CentOS server setup that currently hosts several websites (all relative of each other in some form or another). As of recently throughout the day at the most random times the website speed will lag to a crawl and eventually hit a connection timeout. When I say random times this typically happens anywhere between 10am and 1pm usually, however, this morning this happened to me at 8am. I do not have a lot of familiarity with server knowledge as far as what I am looking for in this situation. What are some possible causes of why my server is slowing the websites down to a complete crawl or timing out? Are there specific things I should be checking for when this happens? I have noticed using: tail /var/log/httpd/access_log That usually when this down time occurs there are lot of IP addresses related to BingBot, Googlebot, and sometimes various bots or spiders that I am unfamiliar with. Could this be related and if so how can I avoid this from causing my websites to lag out? Thanks in advance for any help or advice. The websites that are timing out are built with PHP and use a MySQL database to display information.

  Read the article

• Can't Connect SQL server - process being used by another process. Conflict with IIS?

  - by shinya

  I'm having problem connecting to MS SQL Server (2012 Express) after accessing a database through IIS (web site). I can access the data through web site no problem, but I can't access the data from any other programs (i.e SSMS) until I reboot the SQL server. It seems that the connection stays open even if I close a browser. Here is error message I'm getting Unable to open the physical file "C:---------". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". Unable to open the physical file "C:-------". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". Cannot open user default database. Login failed. Login failed for user 'Myserver\myname'. (.Net SqlClient Data Provider) Server Name: MYPC\SQLEXPRESS Error Number: 5120 Severity: 16 State: 101 Line Number: 65536 I follow the help link and it told me to move TCP before named pipes in the protocol order list. I tried it but it didn't help at all. What is the proper settings on SQL server or IIS in order to release process after closing a browser. How do I avoid getting this error? Thank you for your help

  Read the article

• map linux drives to windwos 7 for media stream over internet

  - by Ortix92

  I'm trying to map a linux network drive to my windows 7 laptop, however this laptop is not on LAN. At home, I simply use Samba, but this obviously won't work over the internet. I'm trying to avoid VPN, so if there are other solutions, I would like to know about them. The reason I ask is because my university does this as well. We can simply map folders to our computers without VPN connections. I'm not sure what they are running as servers. The main reason is because I want to be able to access my files stored on my home server wherever I go. They are located in the /home/ folder (videos, music and pictures folder). I'm trying to keep my websites and media separate from each other. I wouldn't mind accessing them from a web interface either, but I would like to keep the directory structure intact. I remember having an app like that come with winamp and running it on my windows pc (As the server). Unfortunately it doesn't work for linux. Any ideas on what I could use? Would XBMC be able to help me out with this? I did do some researching but I couldn't find any concrete answers

  Read the article

• Centralized backup method recommendation for SMEs with various OSes

  - by Akinator

  Hi I was wondering what in your opinion is the "best" method for having "everything" backed-up in the following situation. We are a SMEs with 10 computers in total. Three of those computers are MACs The rest are windows (1 vista, 4 win7 and 2 XPs) I'm very open to what the method should be but you should also consider the follwing: Very limited resources Quite "small" bandwidth (4 MBs for all (download) 0.4 MBs (upload, yep, thats it)- though this might get, a little bit better) One of the main thing to back up would be the mails, considerations: All windows computers use outlook, mainly 2003 There is one mac that uses outlook too (for mac of course - not 2011 yet) We also have to backup the files: Not a huge amount Very few very big files Very organizes (by machine) What I would like is to hear your opinions as to which would be the best method (or combination of methods - preferably one of course) considering. We are not sure what do we need and I'm open to suggestions, though an online (cloud based applications) would be great, remember the the bandwidth is unbearable. Last think to consider, it that we would like to do weekly updates (unless the method is very easy of course). Thanks in advance!! I tried to be as specific as possible, but if anything is needed I'll gladly update, please ask for any clarification needed! Please avoid any answers like upgrade all to windows 7 and throw away your macs :) our's may not be an ideal situation, but it is what it is, and right now, it would be impossible for us to change it for a lot of circumstances.

  Read the article

< Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >