ip restrictions - Page 447

InfiniBand Enabled Diskless PXE Boot

- by Neeraj Gupta

When you want to bring up a compute server in your environment and need InfiniBand connectivity, usually you go through various installation steps. This could involve operating systems like Linux, followed by a compatible InfiniBand software distribution, associated dependencies and configurations. What if you just want to run some InfiniBand diagnostics or troubleshooting tools from a test machine ? What if something happened to your primary machine and while recovering in rescue mode, you also need access to your InfiniBand network ? Often times we use opensource community supported small Linux distributions but they don't come with required InfiniBand support and tools. In this weblog, I am going to provide instructions on how to add InfniBand support to a specific Linux image - Parted Magic.This is a free to use opensource Linux distro often used to recover or rescue machines. The distribution itself will not be changed at all. Yes, you heard it right ! I have built an InfiniBand Add-on package that will be passed to the default kernel and initrd to get this all working. Pr-requisites You will need to have have a PXE server ready on your ethernet based network. The compute server you are trying to PXE boot should have a compatible IB HCA and must be connected to an active IB network. Required Downloads Download the Parted Magic small distribution for PXE from Parted Magic website. Download InfiniBand PXE Add On package. Right Click and Download from here. Do not extract contents of this file. You need to use it as is. Prepare PXE Server Extract the contents of downloaded pmagic distribution into a temporary directory. Inside the directory structure, you will see pmagic directory containing two files - bzImage and initrd.img. Copy this directory in your TFTP server's root directory. This is usually /tftpboot unless you have a different setup. For Example: cp pmagic_pxe_2012_2_27_x86_64.zip /tmp cd /tmp unzip pmagic_pxe_2012_2_27_x86_64.zip cd pmagic_pxe_2012_2_27_x86_64 # ls -l total 12 drwxr-xr-x 3 root root 4096 Feb 27 15:48 boot drwxr-xr-x 2 root root 4096 Mar 17 22:19 pmagic cp -r pmagic /tftpboot As I mentioned earlier, we dont change anything to the default pmagic distro. Simply provide the add-on package via PXE append options. If you are using a menu based PXE server, then add an entry to your menu. For example /tftpboot/pxelinux.cfg/default can be appended with following section. LABEL Diskless Boot With InfiniBand Support MENU LABEL Diskless Boot With InfiniBand Support KERNEL pmagic/bzImage APPEND initrd=pmagic/initrd.img,pmagic/ib-pxe-addon.cgz edd=off load_ramdisk=1 prompt_ramdisk=0 rw vga=normal loglevel=9 max_loop=256 TEXT HELP * A Linux Image which can be used to PXE Boot w/ IB tools ENDTEXT Note: Keep the line starting with "APPEND" as a single line. If you use host specific files in pxelinux.cfg, then you can use that specific file to add the above mentioned entry. Boot Computer over PXE Now boot your desired compute machine over PXE. This does not have to be over InfiniBand. Just use your standard ethernet interface and network. If using menus, then pick the new entry that you created in previous section. Enable IPoIB After a few minutes, you will be booted into Parted Magic environment. Open a terminal session and see if InfiniBand is enabled. You can use commands like: ifconfig -a ibstat ibv_devices ibv_devinfo If you are connected to InfiniBand network with an active Subnet Manager, then your IB interfaces must have come online by now. You can proceed and assign IP address to them. This will enable you at IPoIB layer. Example InfiniBand Diagnostic Tools I have added several InfiniBand Diagnistic tools in this add-on. You can use from following list: ibstat, ibstatus, ibv_devinfo, ibv_devices perfquery, smpquery ibnetdiscover, iblinkinfo.pl ibhosts, ibswitches, ibnodes Wrap Up This concludes this weblog. Here we saw how to bring up a computer with IPoIB and InfiniBand diagnostic tools without installing anything on it. Its almost like running diskless !

Read the article

Inside the Concurrent Collections: ConcurrentDictionary

- by Simon Cooper

Using locks to implement a thread-safe collection is rather like using a sledgehammer - unsubtle, easy to understand, and tends to make any other tool redundant. Unlike the previous two collections I looked at, ConcurrentStack and ConcurrentQueue, ConcurrentDictionary uses locks quite heavily. However, it is careful to wield locks only where necessary to ensure that concurrency is maximised. This will, by necessity, be a higher-level look than my other posts in this series, as there is quite a lot of code and logic in ConcurrentDictionary. Therefore, I do recommend that you have ConcurrentDictionary open in a decompiler to have a look at all the details that I skip over. The problem with locks There's several things to bear in mind when using locks, as encapsulated by the lock keyword in C# and the System.Threading.Monitor class in .NET (if you're unsure as to what lock does in C#, I briefly covered it in my first post in the series): Locks block threads The most obvious problem is that threads waiting on a lock can't do any work at all. No preparatory work, no 'optimistic' work like in ConcurrentQueue and ConcurrentStack, nothing. It sits there, waiting to be unblocked. This is bad if you're trying to maximise concurrency. Locks are slow Whereas most of the methods on the Interlocked class can be compiled down to a single CPU instruction, ensuring atomicity at the hardware level, taking out a lock requires some heavy lifting by the CLR and the operating system. There's quite a bit of work required to take out a lock, block other threads, and wake them up again. If locks are used heavily, this impacts performance. Deadlocks When using locks there's always the possibility of a deadlock - two threads, each holding a lock, each trying to aquire the other's lock. Fortunately, this can be avoided with careful programming and structured lock-taking, as we'll see. So, it's important to minimise where locks are used to maximise the concurrency and performance of the collection. Implementation As you might expect, ConcurrentDictionary is similar in basic implementation to the non-concurrent Dictionary, which I studied in a previous post. I'll be using some concepts introduced there, so I recommend you have a quick read of it. So, if you were implementing a thread-safe dictionary, what would you do? The naive implementation is to simply have a single lock around all methods accessing the dictionary. This would work, but doesn't allow much concurrency. Fortunately, the bucketing used by Dictionary allows a simple but effective improvement to this - one lock per bucket. This allows different threads modifying different buckets to do so in parallel. Any thread making changes to the contents of a bucket takes the lock for that bucket, ensuring those changes are thread-safe. The method that maps each bucket to a lock is the GetBucketAndLockNo method: private void GetBucketAndLockNo( int hashcode, out int bucketNo, out int lockNo, int bucketCount) { // the bucket number is the hashcode (without the initial sign bit) // modulo the number of buckets bucketNo = (hashcode & 0x7fffffff) % bucketCount; // and the lock number is the bucket number modulo the number of locks lockNo = bucketNo % m_locks.Length; } However, this does require some changes to how the buckets are implemented. The 'implicit' linked list within a single backing array used by the non-concurrent Dictionary adds a dependency between separate buckets, as every bucket uses the same backing array. Instead, ConcurrentDictionary uses a strict linked list on each bucket: This ensures that each bucket is entirely separate from all other buckets; adding or removing an item from a bucket is independent to any changes to other buckets. Modifying the dictionary All the operations on the dictionary follow the same basic pattern: void AlterBucket(TKey key, ...) { int bucketNo, lockNo; 1: GetBucketAndLockNo( key.GetHashCode(), out bucketNo, out lockNo, m_buckets.Length); 2: lock (m_locks[lockNo]) { 3: Node headNode = m_buckets[bucketNo]; 4: Mutate the node linked list as appropriate } } For example, when adding another entry to the dictionary, you would iterate through the linked list to check whether the key exists already, and add the new entry as the head node. When removing items, you would find the entry to remove (if it exists), and remove the node from the linked list. Adding, updating, and removing items all follow this pattern. Performance issues There is a problem we have to address at this point. If the number of buckets in the dictionary is fixed in the constructor, then the performance will degrade from O(1) to O(n) when a large number of items are added to the dictionary. As more and more items get added to the linked lists in each bucket, the lookup operations will spend most of their time traversing a linear linked list. To fix this, the buckets array has to be resized once the number of items in each bucket has gone over a certain limit. (In ConcurrentDictionary this limit is when the size of the largest bucket is greater than the number of buckets for each lock. This check is done at the end of the TryAddInternal method.) Resizing the bucket array and re-hashing everything affects every bucket in the collection. Therefore, this operation needs to take out every lock in the collection. Taking out mutiple locks at once inevitably summons the spectre of the deadlock; two threads each hold a lock, and each trying to acquire the other lock. How can we eliminate this? Simple - ensure that threads never try to 'swap' locks in this fashion. When taking out multiple locks, always take them out in the same order, and always take out all the locks you need before starting to release them. In ConcurrentDictionary, this is controlled by the AcquireLocks, AcquireAllLocks and ReleaseLocks methods. Locks are always taken out and released in the order they are in the m_locks array, and locks are all released right at the end of the method in a finally block. At this point, it's worth pointing out that the locks array is never re-assigned, even when the buckets array is increased in size. The number of locks is fixed in the constructor by the concurrencyLevel parameter. This simplifies programming the locks; you don't have to check if the locks array has changed or been re-assigned before taking out a lock object. And you can be sure that when a thread takes out a lock, another thread isn't going to re-assign the lock array. This would create a new series of lock objects, thus allowing another thread to ignore the existing locks (and any threads controlling them), breaking thread-safety. Consequences of growing the array Just because we're using locks doesn't mean that race conditions aren't a problem. We can see this by looking at the GrowTable method. The operation of this method can be boiled down to: private void GrowTable(Node[] buckets) { try { 1: Acquire first lock in the locks array // this causes any other thread trying to take out // all the locks to block because the first lock in the array // is always the one taken out first // check if another thread has already resized the buckets array // while we were waiting to acquire the first lock 2: if (buckets != m_buckets) return; 3: Calculate the new size of the backing array 4: Node[] array = new array[size]; 5: Acquire all the remaining locks 6: Re-hash the contents of the existing buckets into array 7: m_buckets = array; } finally { 8: Release all locks } } As you can see, there's already a check for a race condition at step 2, for the case when the GrowTable method is called twice in quick succession on two separate threads. One will successfully resize the buckets array (blocking the second in the meantime), when the second thread is unblocked it'll see that the array has already been resized & exit without doing anything. There is another case we need to consider; looking back at the AlterBucket method above, consider the following situation: Thread 1 calls AlterBucket; step 1 is executed to get the bucket and lock numbers. Thread 2 calls GrowTable and executes steps 1-5; thread 1 is blocked when it tries to take out the lock in step 2. Thread 2 re-hashes everything, re-assigns the buckets array, and releases all the locks (steps 6-8). Thread 1 is unblocked and continues executing, but the calculated bucket and lock numbers are no longer valid. Between calculating the correct bucket and lock number and taking out the lock, another thread has changed where everything is. Not exactly thread-safe. Well, a similar problem was solved in ConcurrentStack and ConcurrentQueue by storing a local copy of the state, doing the necessary calculations, then checking if that state is still valid. We can use a similar idea here: void AlterBucket(TKey key, ...) { while (true) { Node[] buckets = m_buckets; int bucketNo, lockNo; GetBucketAndLockNo( key.GetHashCode(), out bucketNo, out lockNo, buckets.Length); lock (m_locks[lockNo]) { // if the state has changed, go back to the start if (buckets != m_buckets) continue; Node headNode = m_buckets[bucketNo]; Mutate the node linked list as appropriate } break; } } TryGetValue and GetEnumerator And so, finally, we get onto TryGetValue and GetEnumerator. I've left these to the end because, well, they don't actually use any locks. How can this be? Whenever you change a bucket, you need to take out the corresponding lock, yes? Indeed you do. However, it is important to note that TryGetValue and GetEnumerator don't actually change anything. Just as immutable objects are, by definition, thread-safe, read-only operations don't need to take out a lock because they don't change anything. All lockless methods can happily iterate through the buckets and linked lists without worrying about locking anything. However, this does put restrictions on how the other methods operate. Because there could be another thread in the middle of reading the dictionary at any time (even if a lock is taken out), the dictionary has to be in a valid state at all times. Every change to state has to be made visible to other threads in a single atomic operation (all relevant variables are marked volatile to help with this). This restriction ensures that whatever the reading threads are doing, they never read the dictionary in an invalid state (eg items that should be in the collection temporarily removed from the linked list, or reading a node that has had it's key & value removed before the node itself has been removed from the linked list). Fortunately, all the operations needed to change the dictionary can be done in that way. Bucket resizes are made visible when the new array is assigned back to the m_buckets variable. Any additions or modifications to a node are done by creating a new node, then splicing it into the existing list using a single variable assignment. Node removals are simply done by re-assigning the node's m_next pointer. Because the dictionary can be changed by another thread during execution of the lockless methods, the GetEnumerator method is liable to return dirty reads - changes made to the dictionary after GetEnumerator was called, but before the enumeration got to that point in the dictionary. It's worth listing at this point which methods are lockless, and which take out all the locks in the dictionary to ensure they get a consistent view of the dictionary: Lockless: TryGetValue GetEnumerator The indexer getter ContainsKey Takes out every lock (lockfull?): Count IsEmpty Keys Values CopyTo ToArray Concurrent principles That covers the overall implementation of ConcurrentDictionary. I haven't even begun to scratch the surface of this sophisticated collection. That I leave to you. However, we've looked at enough to be able to extract some useful principles for concurrent programming: Partitioning When using locks, the work is partitioned into independant chunks, each with its own lock. Each partition can then be modified concurrently to other partitions. Ordered lock-taking When a method does need to control the entire collection, locks are taken and released in a fixed order to prevent deadlocks. Lockless reads Read operations that don't care about dirty reads don't take out any lock; the rest of the collection is implemented so that any reading thread always has a consistent view of the collection. That leads us to the final collection in this little series - ConcurrentBag. Lacking a non-concurrent analogy, it is quite different to any other collection in the class libraries. Prepare your thinking hats!

Read the article

A problem with conky in Gnome 3.4 [closed]

- by Pranit Bauva

Possible Duplicate: Conky not working in Gnome 3.4 My conky in Gnome 3.4 is not working. When I run a conky script nothing appears but the process is running. Please also see the debug code : pungi-man@pungi-man:~$ sh conky_startup.sh Conky: forked to background, pid is 3157 Conky: desktop window (c00023) is subwindow of root window (aa) Conky: window type - override Conky: drawing to created window (0x2200001) Conky: drawing to double buffer My conky script is : background yes update_interval 1 cpu_avg_samples 2 net_avg_samples 2 temperature_unit celsius double_buffer yes no_buffers yes text_buffer_size 2048 gap_x 10 gap_y 30 minimum_size 190 450 maximum_width 190 own_window yes own_window_type override own_window_transparent yes own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below border_inner_margin 0 border_outer_margin 0 alignment tr draw_shades no draw_outline no draw_borders no draw_graph_borders no override_utf8_locale yes use_xft yes xftfont caviar dreams:size=8 xftalpha 0.5 uppercase no default_color FFFFFF color1 DDDDDD color2 AAAAAA color3 888888 color4 666666 lua_load /home/pungi-man/.conky/conky_grey.lua lua_draw_hook_post main TEXT ${voffset 35} ${goto 95}${color4}${font ubuntu:size=22}${time %e}${color1}${offset -50}${font ubuntu:size=10}${time %A} ${goto 85}${color2}${voffset -2}${font ubuntu:size=9}${time %b}${voffset -2} ${color3}${font ubuntu:size=12}${time %Y}${font} ${voffset 80} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}CPU ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${top name 1}${alignr}${top cpu 1}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color2}${top name 2}${alignr}${top cpu 2}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color3}${top name 3}${alignr}${top cpu 3}% ${goto 90}${cpugraph 10,100 666666 666666} ${goto 90}${voffset -10}${font Ubuntu:size=7,weight:normal}${color}${threads} process ${voffset 20} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}MEM ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${top_mem name 1} ${alignr}${top_mem mem 1}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color2}${top_mem name 2} ${alignr}${top_mem mem 2}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color3}${top_mem name 3} ${alignr}${top_mem mem 3}% ${voffset 15} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}DISKS ${goto 90}${diskiograph 30,100 666666 666666}${voffset -30} ${goto 90}${font Ubuntu:size=7,weight:normal}${color}used: ${fs_used /home} /home ${goto 90}${font Ubuntu:size=7,weight:normal}${color}used: ${fs_used /} / ${voffset 10} ${goto 70}${font Ubuntu:size=18,weight:bold}${color3}NET${alignr}${color2}${font Ubuntu:size=7,weight:bold}${color1}${if_up eth0}eth ${addr eth0} ${endif}${if_up wlan0}wifi ${addr wlan0}${endif} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}open ports: ${alignr}${color2}${tcp_portmon 1 65535 count} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}${offset 10}IP${alignr}DPORT ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 0}${alignr 1}${tcp_portmon 1 65535 rport 0} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 1}${alignr 1}${tcp_portmon 1 65535 rport 1} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 2}${alignr 1}${tcp_portmon 1 65535 rport 2} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 3}${alignr 1}${tcp_portmon 1 65535 rport 3} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 4}${alignr 1}${tcp_portmon 1 65535 rport 4} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 5}${alignr 1}${tcp_portmon 1 65535 rport 5} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 6}${alignr 1}${tcp_portmon 1 65535 rport 6} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 7}${alignr 1}${tcp_portmon 1 65535 rport 7} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 8}${alignr 1}${tcp_portmon 1 65535 rport 8} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 9}${alignr 1}${tcp_portmon 1 65535 rport 9} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 10}${alignr 1}${tcp_portmon 1 65535 rport 10} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 11}${alignr 1}${tcp_portmon 1 65535 rport 11} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 12}${alignr 1}${tcp_portmon 1 65535 rport 12} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 13}${alignr 1}${tcp_portmon 1 65535 rport 13} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 14}${alignr 1}${tcp_portmon 1 65535 rport 14} This script works fine with unity but faces problems in gnome 3.4 Can anyone please sort it out?

Read the article

MacGyver Moments

- by Geoff N. Hiten

Denny Cherry tagged me to write about my best MacGyver Moment. Usually I ignore blogosphere fluff and just use this space to write what I think is important. However, #MVP10 just ended and I have a stronger sense of community. Besides, where else would I mention my second best Macgyver moment was making a BIOS jumper out of a soda can. Aluminum is conductive and I didn't have any real jumpers lying around. My best moment is probably my entire home computer network. Every system but one is hand-built, usually cobbled together out of spare parts and 'adapted' from its original purpose. My Primary Domain Controller is a Dell 2300. The Service Tag indicates it was shipped to the original owner in 1999. Box has a PERC/1 RAID controller. I acquired this from a previous employer for $50. It runs Windows Server 2003 Enterprise Edition. Does DNS, DHCP, and RADIUS services as a bonus. RADIUS authentication is used for VPN and Wireless access. It is nice to sign in once and be done with it. The Secondary Domain Controller is an old desktop. Dual P-III 933 with some extra drives. My VPN box is a P-II 250 with 384MB of RAM and a 21 GB hard drive. I did a P-to-V to my Hyper-V box a year or so ago and retired the hardware again. Dynamic DNS lets me connect no matter how often Comcast shuffles my IP. The Hyper-V box is a desktop system with 8GB RAM and an AMD Athlon 5000+ processor. Cost me less than $500 to put together nearly two years ago. I reasoned that if Vista and Windows 2008 were the same code then Vista 64-bit certified meant the drivers for Vista would load into Windows 2008. Turns out I was right. Later I added three 1TB drives but wasn't too happy with how that turned out. I recovered two of the drives yesterday and am building an iSCSI storage unit. (Much thanks to Starwind. Great product). I am using an old AMD 1.1GhZ box with 1.5 GB RAM (cobbled together from three old PCs) as my storave server. The Hyper-V box is slated for an OS rebuild to 2008 R2 once I get the storage system worked out. maybe in a week or two. A couple of DLink Gigabit switches ties everything together. Add in the Vonage box, the three PCs, the Wireless-N Access Point, the two notebooks and the XBox and you have gone from MacGyver to darn near Rube Goldberg. The only thing I really spend money on is power supplies and fans. I buy top-of-the-line for both. I even pull and crimp my own cables. Oh, and if my kids hose up a PC, I have all of their data on a server elsewhere. Every PC and laptop is pretty much interchangable for email and basic workstation tasks. That helps a lot too. Of course I will tag SQLVariant.

Read the article

Sorry about the wait.

- by Ratman21

In the last two days have been trying remove “Iolo System Mechanic Professional” (With anti-virus and FireWall) from 3 of the 5 pc’s we have (3 lap tops and two Desk tops) as it was going to expire on the 13th. So I could replace them with a free anti-virus (AVG) and just use the windows fire wall. I have been using the same set up on one of my desk tops (XP Pro) for 8 months and one of the Lap tops (Vista) for 5 months. The problem was that System Mechanic did not want to go. Even after using the uninstall option on the desk top (my main PC, well its that because has the larger of all the PC’s hard drives but, is the oldest and runs XP home) and using Ccleaner to try and remove it. It was still showing up as there and after I went a head and tried installing AVG and ran it. I found that the TCP/IP module was missing. So no internet, I had to restore the PC back to the 1st to get the module back and then install AVG (after making sure window firewall was back on. I didn’t check that on the first try). Got the PC back to normal, very late last night. Only one of the two lap tops was easy but, even at that there are still some parts of System Mechanic on it but, AVG and firewall are working. I may try an hunt down parts of System Mechanic on it and delete them on this lap top. Which was what finally had to do on the one of the Lap tops (also XP Home) as it would not uninstall after I restored the PC back to the 4th. So delete, delete, delete and Ccleaner (one dl file would not delete though). And I just finish installing AVG and now running a scan on the lap top. So all of this took two days (well three counting today). I started late Friday night and just finishing up now. I only started this switch over after I had finished my Job search for day on Friday. As for blogging on Tuesday, Wednesday and Thursday, I was busy and by the end of the day was too tired to blog, that and was hung up still on that 2nd dare of The Love Dare. So I cleaned the house, while she was out of the house. I mean, I cleaned, not just vacuumed house I cleaned the kitchen counter tops and the sinks. Did the dishes and some of the laundry over two of the those days. As to the third day of Love Dare which is “Love is not selfish” and the dare “Whatever you put your time, energy, and money into will become more important to you. It’s hard to care for something you are not investing in. Along with restraining from negative comments, buy your spouse something that says, I was thinking of you today.” Being on a very limited income, a lot of normal guy buying for girls is out (for one thing, the comment why did you waste our money on flowers, etc, etc, would come up. Not from me though). So that one is on hold till money issues are not a problem (no that does not mean never). The 4th day “Love is thoughtful” and the dare “Contact your spouse sometime during the business of the day. Have no agenda other than asking how he or she is doing and if there is anything you could do for them”. I did this dare while I was still working with census last week and trying to do the dares. Well I start my CCNA classes Monday the 15th and I move on to the next Love Dare day “Love is not rude”.

Read the article

top Tweets SOA Partner Community – June 2012

- by JuergenKress

Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity Simone Geib Contact me directly for ideas how to improve http://bit.ly/advancedsoasuite and additional posts, presentations, white papers, #soasuite SOA CommunitySOA Community Newsletter May 2012 https://soacommunity.wordpress.com /2012/05/28/soa-community-newsletter-may-2012/ #soacommunity Simone Geib #soasuite advanced OTN page has become too cluttered. Broke it into separate pages to start with. http://bit.ly/advancedsoasuite SOA CommunitySOA Management with Enterprise Manager Cloud Control 12c and Business Transaction Management 12c Demo https://soacommunity.wordpress.com /2012/05/21/soa-management-with-enterprise-manager-cloud-control-12c-and-business-transaction-management-12c-demo/ #soacommunity OracleBlogs June Webcast: SOA Gateway Implementation and Troubleshooting (2 sessions) http://ow.ly/1kbRFA OTNArchBeatEvery cloud needs an SOA lining: analyst | @JoeMcKendrick http://zd.net/KTgMHk ServiceTechSymposium New session just posted to calendar: "NoSQL for Data Services, Data Virtualization & Big Data" by Guido Schmutz, Trivadis AG ://ow.ly/bjjOe OTNArchBeat?Every cloud needs an SOA lining: analyst | @JoeMcKendrick http://zd.net/KTgMHk Debra Lilley looks good - real proof people are using the apps ! RT @fteter:Very cool Fusion Applications Help site: http://bit.ly/L3nvOR #FusionApps OTNArchBeat How to Set JVM Parameters in Oracle SOA 11G | Francis Ip http://bit.ly/JBDYPj demed"rapid proliferation of cloud computing will drive convergence of SOA and cloud paradigms" http://ovum.com/2012/05/18/soa-paves-the-way-for-cloud/ SOA Community Sending out invitations to our advanced Fusion Middleware Summer Camps! Want to learn more register for the community http://www.oracle.com/goto/emea/soa SOA Community Middleware Oracle Excellence Awards 2012 - HAPPY NEW YEAR! https://soacommunity.wordpress.com/ 2012/05/31/middleware-oracle-excellence-awards-2012 happy-new-year/ #soacommunity #opn #opnaward #specialization #oracle Simone Geib #oraclesoa performance tuning resources. All in one: docs, blogs, WPs, ppts: http://bit.ly/soa_resources OracleBlogs Middleware Oracle Excellence Awards 2012 - HAPPY NEW YEAR! http://ow.ly/1k9ri0 ServiceTechSymposiumNew session just posted to Symposium calendar: "Service Modeling & BPM Business Value Patterns" by Jürgen Kress, Oracle http://www.servicetechsymposium.com/ agenda2012.php #service_modeling_and_bpm _business_value_patterns SOA Community Happy New Year #soacommunity thanks for the business! Time for a drink ;-) http://pic.twitter.com/zkK08KWB Jan van ZoggelUsing execute-sql() function for Name-Value pair lookups in Oracle Service Bus http://wp.me/p1H430-jZ SOA Community Middleware Oracle Excellence Awards 2012–HAPPY NEW YEAR! http://wp.me/p10C8u-q4 orclateamsoa A-Team Blog #ateam: BPM 11g Deployment & Instance Migration - I have seen a number of request lately asking how to http://ow.ly/1jZ0h8 OTNArchBeat Who should ‘own’ the Enterprise Architecture? | Michael Glas http://bit.ly/K0ge0Q Oracle UPK & Tutor TOMORROW! (June 23rd) - UPK Professional Webinar at Noon ET: Discover why user adoption is a key factor for the http://bit.ly/LjZjdx Sabine Leitner Finance Event im Design-Hotel beim Barbeque: 21. Juni FRA mit Kunden SV Informatik, Schufa, LBBW http://bit.ly/JtwE3v #Oracle @itevent OracleEnterpriseMgr SOA Management with Enterprise Manager Cloud Control 12c and Business Transaction Management 12c Demo http://ow.ly/b3WP1 #em12c ServiceTechSymposium New session just posted to Symposium calendar: "Elastic SOA in the Cloud" by Steve Millidge, C2B2 Consulting http://www.servicetechsymposium.com /agenda2012.php #elastic_soa_in_the_cloud OTNArchBeat Securing Heterogeneous Systems Using Oracle Web Services Manager by @rluttikhuizen & Jens Peters http://bit.ly/KjShFi Oracleteamsoa A-Team Blog #ateam: How to Set JVM Parameters in Oracle SOA 11G http://ow.ly/1k2cnl SOA Community Oracle Service Registry in an automated (Maven) SOA/BPM build http://redstack.wordpress.com /2012/05/22/using-oracle-service-registry-in-an-automated-maven-soabpm-build/ #soacommunity #redstack #soa #osr #opn SOA CommunityHigh demand for advanced Fusion Middleware Summer Camps! Want to learn more register for the #soacommunity http://www.oracle.com/goto/emea/soa OracleBlogs? How to Set JVM Parameters in Oracle SOA 11G http://ow.ly/1k1UTv SOA Community top Tweets SOA Partner Community – May 2012 http://wp.me/p10C8u-pP ServiceTechSymposium New session just posted to Symposium calendar: "SOA Governance at EDP: A Global Energy Company" by Manuel Rosa, Link http://www.servicetechsymposium.com/ agenda2012.php #soa_governance_at_edp For regular information on Oracle SOA Suite become a member in the SOA Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Technorati Tags: soacommunity,twitter,Oracle,SOA Community,Jürgen Kress,OPN,SOA,BPM

Read the article

CodePlex Daily Summary for Wednesday, January 19, 2011

CodePlex Daily Summary for Wednesday, January 19, 2011Popular ReleasesAutoSPInstaller: AutoSPInstaller for SharePoint 2010 (v2 Beta): New package consisting of AutoSPInstaller v2 files. If you have not previously downloaded AutoSPInstaller, or are interested in the new functionality and format, this is the recommended release.MiniTwitter: 1.65: MiniTwitter 1.65 ???? ?? List ????? in-reply-to ???????? ????????????????????????? ?? OAuth ????????????????????????????iTracker Asp.Net Starter Kit: Version 3.0.0: This is the inital release of the version 3.0.0 Visual Studio 2010 (.Net 4.0) remake of the ITracker application. I connsider this a working, stable application but since there are still some features missing to make it "complete" I'm leaving it listed as a "beta" release. I am hoping to make it feature complete for v3.1.0 but anything is possible.mytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.52.1 beta 2: New MVC3 RTM fix bug: Dropdown select fix bug: Add Store/Department and Add Store/Produser WEB.mytrip.mvc 1.0.52.1 Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) SRC.mytrip.mvc 1.0.52.1 System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager changes: RenderView controller extension works for razor also live demo switched to razorBloodSim: BloodSim - 1.3.3.1: - Priority update to resolve a bug that was causing Boss damage to ignore Blood Shields entirelyRawr: Rawr 4.0.16 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of this release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Tracker. W...MvcContrib: an Outer Curve Foundation project: MVC 3 - 3.0.51.0: Please see the Change Log for a complete list of changes. MVC BootCamp Description of the releases: MvcContrib.Release.zip MvcContrib.dll MvcContrib.TestHelper.dll MvcContrib.Extras.Release.zip T4MVC. The extra view engines / controller factories and other functionality which is in the project. This file includes the main MvcContrib assembly. Samples are included in the release. You do not need MvcContrib if you download the Extras.Yahoo! UI Library: YUI Compressor for .Net: Version 1.5.0.0 - Jalthi: Updated solution to VS2010. New: Work Item #4450 - Optional MSBuild task parameter :: Do not error if no files were found. Fixed: Work Item #5028 - Output file encoding is the same as the optional MSBuild task encoding argument. Fixed: Work Item #5824 - MSBuilds where slow, after the first build due to the Current Thread being forced to en-gb, on none en-gb systems. Changed: Work Item #6873 - Project license changed from MS-PL to GPLv2. New: Added all the unit tests from the Java YU...N2 CMS: 2.1.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. 2.1.1 Maintenance release List of changes 2.1 Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open...VidCoder: 0.8.1: Adds ability to choose an arbitrary range (in seconds or frames) to encode. Adds ability to override the title number in the output file name when enqueing multiple titles. Updated presets: Added iPhone 4, Apple TV 2, fixed some existing presets that should have had weightp=0 or trellis=0 on them. Added {parent} option to auto-name format. Use {parent:2} to refer to a folder 2 levels above the input file. Added {title:2} option to auto-name format. Adds leading zeroes to reach the sp...Microsoft SQL Server Product Samples: Database: AdventureWorks2008R2 without filestream: This download contains a version of the AdventureWorks2008R2 OLTP database without FILESTREAM properties. You do not need to have filestream enabled to attach this database. No additional schema or data changes have been made. To install the version of AdventureWorks2008R2 that includes filestream, use the SR1 installer available here. Prerequisites: Microsoft SQL Server 2008 R2 must be installed. Full-Text Search must be enabled. Installing the AdventureWorks2008R2 OLTP database: 1. Cl...NuGet: NuGet 1.0 RTM: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. The URL to the package OData feed is: http://go.microsoft.com/fwlink/?LinkID=206669MVC Music Store: MVC Music Store v2.0: This is the 2.0 release of the MVC Music Store Tutorial. This tutorial is updated for ASP.NET MVC 3 and Entity Framework Code-First, and contains fixes and improvements based on feedback and common questions from previous releases. The main download, MvcMusicStore-v2.0.zip, contains everything you need to build the sample application, including A detailed tutorial document in PDF format Assets you will need to build the project, including images, a stylesheet, and a pre-populated databas...Fluent Validation for .NET: 2.0: Changes since 2.0 RC Fix typo in the name of FallbackAwareResourceAccessorBuilder Fix issue #7062 - allow validator selectors to work against nullable properties with overriden names. Fix error in German localization. Better support for client-side validation messages in MVC integration. All changes since 1.3 Allow custom MVC ModelValidators to be added to the FVModelValidatorProvider Support resource provider for custom property validators through the new IResourceAccessorBuilder ...EnhSim: EnhSim 2.3.2 ALPHA: 2.3.2 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Quick update to ...??????????: All-In-One Code Framework ??? 2011-01-12: 2011???????All-In-One Code Framework（??） 2011?1??????！！http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?，???????ASP.NET, AJAX, WinForm, Windows Shell????13?Sample Code。???，??????????sample code。 ?????：http://blog.csdn.net/sjb5201/archive/2011/01/13/6135037.aspx ??，??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????，??Email ????patterns & practices – Enterprise Library: Enterprise Library 5.0 - Extensibility Labs: This is a preview release of the Hands-on Labs to help you learn and practice different ways the Enterprise Library can be extended. Learning MapCustom exception handler (estimated time to complete: 1 hr 15 mins) Custom logging trace listener (1 hr) Custom configuration source (registry-based) (30 mins) System requirementsEnterprise Library 5.0 / Unity 2.0 installed SQL Express 2008 installed Visual Studio 2010 Pro (or better) installed AuthorsChris Tavares, Microsoft Corporation ...Orchard Project: Orchard 1.0: Orchard Release Notes Build: 1.0.20 Published: 1/12/2010 How to Install OrchardTo install Orchard using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard.ashx Web PI will detect your hardware environment and install the application. --OR-- Alternatively, to install the release manually, download the Orchard.Web.1.0.20.zip file. http://orchardproject.net/docs/Manually-installing-Orchard-zip-file.ashx The zip contents are pre-built and ready-to-run...Umbraco CMS: Umbraco 4.6.1: The Umbraco 4.6.1 (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains nearly 200 bug fixes since the 4.5.2 release. Getting Started A great place to start is with our Getting Started Guide: Getting Started Guide: http://umbraco.codeplex.com/Project/Download/FileDownload.aspx?DownloadId=197051 Make sure to check the free foundation videos on how to get started building Umbraco sites. They're ...New ProjectsBAM Service Generator: BizTalk BAM Service Generator is a command line to generate .NET 4.0 WCF services for BizTalk BAM activities. Don't Drink and Code Library: Don't Drink and Code Library is a collection of useful services to help you build functional websites and applications.F# Sample: Transportation Algorithm: Implementation of the transportation algorithm in F#.Fast Replace: This application replaces characters in big files in very fast way, by not loading the hole file in memory. Usuful because Microsoft's Word, Wordpad and Notepad cannot handle big files (more than 50 MB) very well, so replacing characters is a painful process.Hall: ????I Know: Post anonymous information online.jQuery Image Rotator Plugin: jQuery Image Rotator Plugin makes it easier for web developers to create a rotating display of images. You'll no longer have to write this logic on a case by case basis. It's developed in JavaScript using jQuery.MetaREST: MetaREST makes it easier for Web or Service Developers to publish REST Services using simple Class, Method and Parameters Attributes. You can publish your legacy business class as a REST Service in a couple of minutes. Multi-Project Templates with Wizard: Visual Studio 2010 Sample: This project shows you simple example of creating multi-project templates with wizard using Visual Studio 2010, which generates VSIX file. A VSIX file enables us to install Visual Studio extensions (tools, controls, template etc) with a single click.Orchard Contact Form: This project is to create an Orchard module that allows you to create one or more Contact Pages, alternatively you can assign a ContactForm as a content part or widget to an arbitrary page. Orchard LDAP module: Active directory authentication module for Orchard.ProcessDomain: ProcessDomain allows developers to isolate the execution of code in a separate process using similar semantics to that of AppDomain. It's developed in C# and the binaries can be used with .NET Framework 2.0 or later.QRCode Helper: This helper for WebMatrix and ASP.NET Web Pages allows you to easily display QR Code graph to your site. ????ASP.NET????QR?????????????????、WebMatrix ??? ASP.NET Web Pages ????????。QuantaOS: QuantaOS is a 32bit operating system, multitasking and GUI support is soon to be added. Written in C++ and assemblyShuttle Service Bus: Shuttle Service Bus is a free open-source software project that aims to provide an enterprise ready service bus without any restrictions.Socket Policy File Server: The socket policy file server is a simple TCP server that serves the socket policy file required by Adobe Flash Player for cross domain resource access. TibiaPinger: Tibia Pinger, Tools, Bot, ArkBot, Tibia, NeoBot, TibiaAuto, NG, ElfBotVingy - Visual Studio Instant Search Addin: A simple, but effective add in for Visual Studio 2010 so that you can search the web in a non intrusive way, and can filter results based on sources.

Read the article

Issues printing through ssh tunnel and port forwarding

- by simogasp

I'm having some problems trying to print through a ssh tunnel. I'd like to print from my laptop to a network printer (Toshiba es453, for what matters) which is in a local network. I can reach the local network using a gateway. So far I did the following: ssh -N -L19100:<Printer_IP>:9100 <username>@<ssh_gateway> Basically i just mapped the port 19100 of my laptop directly to the input port of the printer, passing through the gateway. So far, so good. Then, i tried to install on my laptop a new printer with the GUI config tool of ubuntu, so that the new printer is on localhost at port 19100 (as APP Socket/HP Jet Direct) , then I provided the proper driver of the printer. In theory, once the tunnel is open I should be able to print from any program just selecting this printer. Of course, it does not work. :-) The document hangs in the queue with status Processing while in the shell where I set up the tunnel I get these errors on failing opening channels debug1: Local forwarding listening on ::1 port 19100. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 19100. debug1: channel 1: new [port listener] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 3: new [direct-tcpip] channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44434, nchannels 4 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] channel 3: open failed: connect failed: Connection timed out debug1: channel 3: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44443, nchannels 4 channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44493, nchannels 3 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] As a further debugging test I tried the following. From a machine inside the local network I did a telnet <IP_printer> 9100, got access, wrote some random thing, closed the connection and correctly I got a print of what I had written. So the port and the ip of the printer should be correct. I tried the same from my laptop with the tunnel opened, the telnet succeeded but, again, the printer didn't print anything, getting the usual channel x: open failed: errors. I'm not a great expert on the matter, I just thought that in theory it was possible to do something like that, but maybe there is something that I didn't consider or I did wrong. Any clue? Thanks! Simone [update] As further debugging test, I tried to replicate the procedure from a machine in the local network. From that machine, I did ssh -N -L19100:<IP_printer>:9100 <username>@<ssh_gateway> (note that now the machine, the gateway and the printer are in the same local network) then I tried again the telnet test with telnet localhost 19100, I got access and everything, but I didn't get the print but the usual error channel 2: open failed: connect failed: Connection timed out Maybe I am missing some other connection to be forwarded or maybe this is not allowed by the administrators. Of course, if I connect via ssh tunneling to the local machine from my laptop through the gateway, I can successfully print using the lpr command (from the local machine). But this is what I would like to avoid (yes, I'm lazy...:-), I would like to have a more 'elegant' and transparent way to do that.

Read the article

Introducing MySQL for Excel

- by Javier Treviño

As part of the new product initiatives of the MySQL on Windows group we released a tool that makes the task of getting data in and out of a MySQL Database very friendly and intuitive, and we paired it with one of the preferred applications for data analysis and manipulation in Windows platforms, MS Excel. Welcome to MySQL for Excel, an add-in that is installed and accessed from within the MS Excel’s Data tab offering a wizard-like interface arranged in an elegant yet simple way to help users browse MySQL Schemas, Tables, Views and Procedures and perform data operations against them using MS Excel as the vehicle to drive the data in and out MySQL Databases. One of the coolest features we had in mind designing MySQL for Excel is simplicity. MS Excel is simple and easy to work with, thus liked by many Windows users because they don’t have to be software gurus to use it. We applied the same principle by targeting MySQL for Excel to any kind of user, so if you are already familiarized with Excel’s interface you will find yourself working with MySQL data in no time. MySQL for Excel is shipped within the MySQL Installer as one of the tools in the suite; if prerequisites are already installed (.NET Framework 4.0, Visual Studio Tools for Office 4.0 and of course MS Office), installing the add-in involves a very few clicks and no further setup to use it. Being an Excel Add-In there is no executable file involved after the installation, running MS Excel and opening the add-in from its Data tab is all that is required. MySQL for Excel automatically integrates with MySQL Workbench (if installed) to share the same connections to MySQL Server installations, that way connections are defined just once in either product saving time. Opening the Add-In brings the Welcome Panel at the right side of the Excel main window from which connections to MySQL Servers are shown grouped by Local VS Remote connections; then users can open any of those connections by double-clicking it and entering the password of the used account. Additionally a user can create a connection by clicking on the New Connection action label or edit connections through MySQL Workbench (if installed) by clicking on the Manage Connections action label. Once a connection is opened, the Schema Selection panel is shown, at the top of it the selected connection (connection name, hostname/IP and username). Just below, a list of schemas is displayed where User Schemas are grouped first followed by System Schemas; users can double-click any selected schema to go to the next panel or select a schema and clicking the Next > button. Users can alternatively click on the < Back button to go back to the Welcome Panel to close the current connection and open a new one; also by clicking the Create New Schema action label they can create an empty new schema. Once a schema is opened the DB Object Selection panel is shown, this is actually the place where the fun stuff happens; from here users are able to perform actions against MySQL Tables, Views and Procedures. ">The actions available here are about importing data from a MySQL Table, View or Procedure to Excel, exporting Excel data to a new MySQL Table, appending Excel data to an existing MySQL Table or editing a MySQL Table’s data by using an Excel Worksheet as a user interface to update data in any row/column, insert new rows or delete existing rows in a very easy and friendly way. More blog posts will follow describing all of these actions, so stay tuned! Remember that your feedback is very important for us, so drop us a message: · MySQL on Windows (this) Blog - https://blogs.oracle.com/MySqlOnWindows/ · Forum - http://forums.mysql.com/list.php?172 · Facebook - http://www.facebook.com/mysql Cheers!

Read the article

IPgallery banks on Solaris SPARC

- by Frederic Pariente

IPgallery is a global supplier of converged legacy and Next Generation Networks (NGN) products and solutions, including: core network components and cloud-based Value Added Services (VAS) for voice, video and data sessions. IPgallery enables network operators and service providers to offer advanced converged voice, chat, video/content services and rich unified social communications in a combined legacy (fixed/mobile), Over-the-Top (OTT) and Social Community (SC) environments for home and business customers. Technically speaking, this offer is a scalable and robust telco solution enabling operators to offer new services while controlling operating expenses (OPEX). In its solutions, IPgallery leverages the following Oracle components: Oracle Solaris, Netra T4 and SPARC T4 in order to provide a competitive and scalable solution without the price tag often associated with high-end systems. Oracle Solaris Binary Application Guarantee A unique feature of Oracle Solaris is the guaranteed binary compatibility between releases of the Solaris OS. That means, if a binary application runs on Solaris 2.6 or later, it will run on the latest release of Oracle Solaris. IPgallery developed their application on Solaris 9 and Solaris 10 then runs it on Solaris 11, without any code modification or rebuild. The Solaris Binary Application Guarantee helps IPgallery protect their long-term investment in the development, training and maintenance of their applications. Oracle Solaris Image Packaging System (IPS) IPS is a new repository-based package management system that comes with Oracle Solaris 11. It provides a framework for complete software life-cycle management such as installation, upgrade and removal of software packages. IPgallery leverages this new packaging system in order to speed up and simplify software installation for the R&D and production environments. Notably, they use IPS to deliver Solaris Studio 12.3 packages as part of the rapid installation process of R&D environments, and during the production software deployment phase, they ensure software package integrity using the built-in verification feature. Solaris IPS thus improves IPgallery's time-to-market with a faster, more reliable software installation and deployment in production environments. Extreme Network Performance IPgallery saw a huge improvement in application performance both in CPU and I/O, when running on SPARC T4 architecture in compared to UltraSPARC T2 servers. The same application (with the same activation environment) running on T2 consumes 40%-50% CPU, while it consumes only 10% of the CPU on T4. The testing environment comprised of: Softswitch (Call management), TappS (Telecom Application Server) and Billing Server running on same machine and initiating various services in capacity of 1000 CAPS (Call Attempts Per Second). In addition, tests showed a huge improvement in the performance of the TCP/IP stack, which reduces network layer processing and in the end Call Attempts latency. Finally, there is a huge improvement within the file system and disk I/O operations; they ran all tests with maximum logging capability and it didn't influence any benchmark values. "Due to the huge improvements in performance and capacity using the T4-1 architecture, IPgallery has engineered the solution with less hardware. This means instead of deploying the solution on six T2-based machines, we will deploy on 2 redundant machines while utilizing Oracle Solaris Zones and Oracle VM for higher availability and virtualization" Shimon Lichter, VP R&D, IPgallery In conclusion, using the unique combination of Oracle Solaris and SPARC technologies, IPgallery is able to offer solutions with much lower TCO, while providing a higher level of service capacity, scalability and resiliency. This low-OPEX solution enables the operator, the end-customer, to deliver a high quality service while maintaining high profitability.

Read the article

#altnetseattle – REST Services

- by GeekAgilistMercenary

Below are the notes I made in the REST Architecture Session I helped kick off with Andrew. RSS, ATOM, and such needed for better discovery. i.e. there still is a need for some type of discovery. Difficult is modeling behaviors in a RESTful way. ?? Invoking some type of state against an object. For instance in the case of a POST vs. a GET. The GET is easy, comes back as is, but what about a POST, which often changes some state or something. Challenge is doing multiple workflows with stateful workflows. How does batch work. Maybe model the batch as a resource. Frameworks aren’t particularly part of REST, REST is REST. But point argued that REST is modeled, or part of modeling a state machine of some sort… ? Nothing is 100% reliable w/ REST – comparisons drawn with TCP/IP. Sufficient probability is made however for the communications, but the idea of a possible failure has to be built into the usage model of REST. Ruby on Rails / RESTfully, and others used. What were their issues, what do they do. ATOM feeds, object serialized, using LINQ to XML w/ this. No state machine libraries. Idempotent areas around REST and single change POST changes are inherent in the architecture. REST – one of the constrained languages is for the interaction w/ the system. Limiting what can be done on the resources. - disagreement, there is no agreed upon REST verbs. Sam Ruby – RESTful services. Expanded the verbs within REST/HTTP pushes you off the web. Of the existing verbs POST leaves the most up for debate. Robert Reem used Factory to deal with the POST to handle the new state. The POST identifying what it just did by the return. Different states are put into POST, so that new prospective verbs, without creating verbs for REST/HTTP can be used to advantage without breaking universal clients. Biggest issue with REST services is their lack of state, yet it is also one of their biggest strengths. What happens is that the client takes up the often onerous task of handling all state, state machines, and other extraneous resource management. All the GETs, POSTs, DELETEs, INSERTs get all pushed into abstraction. My 2 cents is that this in a way ends up pushing a huge proprietary burden onto the REST services often removing the point of REST to be simple and to the point. WADL does provide discovery and some state control (sort of?) Statement made, "WADL" isn't needed. The JSON, XML, or other client side returned data handles this. I then applied the law of 2 feet rule for myself and headed to finish up these notes, post to the Wiki, and figure out what I was going to do next. For the original Wiki entry check it out here. I will be adding more to this post with a subsequent post. Please do feel free to post your thoughts and ideas about this, as I am sure everyone in the session will have more for elaboration.

Read the article

SPARC T5-4 LDoms for RAC and WebLogic Clusters

- by Jeff Taylor-Oracle

I wanted to use two Oracle SPARC T5-4 servers to simultaneously host both Oracle RAC and a WebLogic Server Cluster. I chose to use Oracle VM Server for SPARC to create a cluster like this: There are plenty of trade offs and decisions that need to be made, for example: Rather than configuring the system by hand, you might want to use an Oracle SuperCluster T5-8 My configuration is similar to jsavit's: Availability Best Practices - Example configuring a T5-8 but I chose to ignore some of the advice. Maybe I should have included an alternate service domain, but I decided that I already had enough redundancy Both Oracle SPARC T5-4 servers were to be configured like this: Cntl 0.25 4 64GB App LDom 2.75 CPU's 44 cores 704 GB DB LDom One CPU 16 cores 256 GB The systems started with everything in the primary domain: # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL NORM UPTIME primary active -n-c-- UART 512 1023G 0.0% 0.0% 11m # ldm list-spconfig factory-default [current] primary # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) -- SNIP 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x30000000 0x30000000 255G 0x80000000000 0x80000000000 256G 0x100000000000 0x100000000000 256G 0x180000000000 0x180000000000 256G # Give this memory block to the DB LDom IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@480 pci_6 pci@4c0 pci_7 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Added an additional service processor configuration: # ldm add-spconfig split # ldm list-spconfig factory-default primary split [current] And removed many of the resources from the primary domain: # ldm start-reconf primary # ldm set-core 4 primary # ldm set-memory 32G primary # ldm rm-io pci@340 primary # ldm rm-io pci@380 primary # ldm rm-io pci@3c0 primary # ldm rm-io pci@400 primary # ldm rm-io pci@440 primary # ldm rm-io pci@480 primary # ldm rm-io pci@4c0 primary # init 6 Needed to add resources to the guest domains: # ldm add-domain db # ldm set-core cid=`seq -s"," 48 63` db # ldm add-memory mblock=0x180000000000:256G db # ldm add-io pci@480 db # ldm add-io pci@4c0 db # ldm add-domain app # ldm set-core 44 app # ldm set-memory 704G app # ldm add-io pci@340 app # ldm add-io pci@380 app # ldm add-io pci@3c0 app # ldm add-io pci@400 app # ldm add-io pci@440 app Needed to set up services: # ldm add-vds primary-vds0 primary # ldm add-vcc port-range=5000-5100 primary-vcc0 primary Needed to add a virtual network port for the WebLogic application domain: # ipadm NAME CLASS/TYPE STATE UNDER ADDR lo0 loopback ok -- -- lo0/v4 static ok -- ... lo0/v6 static ok -- ... net0 ip ok -- ... net0/v4 static ok -- xxx.xxx.xxx.xxx/24 net0/v6 addrconf ok -- .... net0/v6 addrconf ok -- ... net8 ip ok -- -- net8/v4 static ok -- ... # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE net1 Ethernet unknown 0 unknown ixgbe1 net0 Ethernet up 1000 full ixgbe0 net8 Ethernet up 10 full usbecm2 # ldm add-vsw net-dev=net0 primary-vsw0 primary # ldm add-vnet vnet1 primary-vsw0 app Needed to add a virtual disk to the WebLogic application domain: # format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t5000CCA02505F874d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02505f874 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD0/disk 1. c0t5000CCA02506C468d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c468 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD1/disk 2. c0t5000CCA025067E5Cd0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca025067e5c /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD2/disk 3. c0t5000CCA02506C258d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c258 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD3/disk Specify disk (enter its number): ^C # ldm add-vdsdev /dev/dsk/c0t5000CCA02506C468d0s2 HDD1@primary-vds0 # ldm add-vdisk HDD1 HDD1@primary-vds0 app Add some additional spice to the pot: # ldm set-variable auto-boot\\?=false db # ldm set-variable auto-boot\\?=false app # ldm set-var boot-device=HDD1 app Bind the logical domains: # ldm bind db # ldm bind app At the end of the process, the system is set up like this: # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) 3 (24, 25, 26, 27, 28, 29, 30, 31) MEMORY RA PA SIZE 0x30000000 0x30000000 32G IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 ------------------------------------------------------------------------------ NAME app CORE CID CPUSET 4 (32, 33, 34, 35, 36, 37, 38, 39) 5 (40, 41, 42, 43, 44, 45, 46, 47) 6 (48, 49, 50, 51, 52, 53, 54, 55) 7 (56, 57, 58, 59, 60, 61, 62, 63) 8 (64, 65, 66, 67, 68, 69, 70, 71) 9 (72, 73, 74, 75, 76, 77, 78, 79) 10 (80, 81, 82, 83, 84, 85, 86, 87) 11 (88, 89, 90, 91, 92, 93, 94, 95) 12 (96, 97, 98, 99, 100, 101, 102, 103) 13 (104, 105, 106, 107, 108, 109, 110, 111) 14 (112, 113, 114, 115, 116, 117, 118, 119) 15 (120, 121, 122, 123, 124, 125, 126, 127) 16 (128, 129, 130, 131, 132, 133, 134, 135) 17 (136, 137, 138, 139, 140, 141, 142, 143) 18 (144, 145, 146, 147, 148, 149, 150, 151) 19 (152, 153, 154, 155, 156, 157, 158, 159) 20 (160, 161, 162, 163, 164, 165, 166, 167) 21 (168, 169, 170, 171, 172, 173, 174, 175) 22 (176, 177, 178, 179, 180, 181, 182, 183) 23 (184, 185, 186, 187, 188, 189, 190, 191) 24 (192, 193, 194, 195, 196, 197, 198, 199) 25 (200, 201, 202, 203, 204, 205, 206, 207) 26 (208, 209, 210, 211, 212, 213, 214, 215) 27 (216, 217, 218, 219, 220, 221, 222, 223) 28 (224, 225, 226, 227, 228, 229, 230, 231) 29 (232, 233, 234, 235, 236, 237, 238, 239) 30 (240, 241, 242, 243, 244, 245, 246, 247) 31 (248, 249, 250, 251, 252, 253, 254, 255) 32 (256, 257, 258, 259, 260, 261, 262, 263) 33 (264, 265, 266, 267, 268, 269, 270, 271) 34 (272, 273, 274, 275, 276, 277, 278, 279) 35 (280, 281, 282, 283, 284, 285, 286, 287) 36 (288, 289, 290, 291, 292, 293, 294, 295) 37 (296, 297, 298, 299, 300, 301, 302, 303) 38 (304, 305, 306, 307, 308, 309, 310, 311) 39 (312, 313, 314, 315, 316, 317, 318, 319) 40 (320, 321, 322, 323, 324, 325, 326, 327) 41 (328, 329, 330, 331, 332, 333, 334, 335) 42 (336, 337, 338, 339, 340, 341, 342, 343) 43 (344, 345, 346, 347, 348, 349, 350, 351) 44 (352, 353, 354, 355, 356, 357, 358, 359) 45 (360, 361, 362, 363, 364, 365, 366, 367) 46 (368, 369, 370, 371, 372, 373, 374, 375) 47 (376, 377, 378, 379, 380, 381, 382, 383) MEMORY RA PA SIZE 0x30000000 0x830000000 192G 0x4000000000 0x80000000000 256G 0x8080000000 0x100000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 ------------------------------------------------------------------------------ NAME db CORE CID CPUSET 48 (384, 385, 386, 387, 388, 389, 390, 391) 49 (392, 393, 394, 395, 396, 397, 398, 399) 50 (400, 401, 402, 403, 404, 405, 406, 407) 51 (408, 409, 410, 411, 412, 413, 414, 415) 52 (416, 417, 418, 419, 420, 421, 422, 423) 53 (424, 425, 426, 427, 428, 429, 430, 431) 54 (432, 433, 434, 435, 436, 437, 438, 439) 55 (440, 441, 442, 443, 444, 445, 446, 447) 56 (448, 449, 450, 451, 452, 453, 454, 455) 57 (456, 457, 458, 459, 460, 461, 462, 463) 58 (464, 465, 466, 467, 468, 469, 470, 471) 59 (472, 473, 474, 475, 476, 477, 478, 479) 60 (480, 481, 482, 483, 484, 485, 486, 487) 61 (488, 489, 490, 491, 492, 493, 494, 495) 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x80000000 0x180000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@480 pci_6 pci@4c0 pci_7 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Start the domains: # ldm start app LDom app started # ldm start db LDom db started Make sure to start the vntsd service that was created, above. # svcs -a | grep ldo disabled 8:38:38 svc:/ldoms/vntsd:default online 8:38:58 svc:/ldoms/agents:default online 8:39:25 svc:/ldoms/ldmd:default # svcadm enable vntsd Now use the MAC address to configure the Solaris 11 Automated Installation. Database Logical Domain # telnet localhost 5000 {0} ok devalias screen /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@7/display@0 disk7 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p3 disk6 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p2 disk5 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p1 disk4 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p0 scsi1 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0 net3 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0,1 net2 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net2 Boot device: /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 File and args: 1000 Mbps full duplex Link up Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx WLS Logical Domain # telnet localhost 5001 {0} ok devalias hdd1 /virtual-devices@100/channel-devices@200/disk@0 vnet1 /virtual-devices@100/channel-devices@200/network@0 net /virtual-devices@100/channel-devices@200/network@0 disk /virtual-devices@100/channel-devices@200/disk@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx Repeat the process for the second SPARC T5-4, install Solaris, RAC and WebLogic Cluster, and you are ready to go. Maybe buying a SuperCluster would have been easier.

Read the article

Wireless is detected, but not connecting. Ethernet works. How to correct the wireless address?

- by Lucas

I am running Ubuntu 14.04 with cable internet, and my wireless is detected and connected, but I cannot connect to the internet. I know the problem is with my machine because other machines are connecting to the same router just fine. I can connect via ethernet just fine as well. Here are some notable tests: ping 192.168.0.105 works with 0% packet loss, but ping 192.168.0.1 has 100% packet loss. When I plug in my ethernet, ping 192.168.0.1 works with 0% packet loss. My wireless name is tg, and the router ip is 192.168.0.1 (where I can enter username and password). I suspect that I need to change my wireless address from 192.168.0.105 to 192.168.0.1. Any suggestions on how to proceed? extra info: [lucas@lucas-ThinkPad-W520]/home/lucas$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"tg" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:6F:83:F8:F4 Bit Rate=1 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:52 Invalid misc:166 Missed beacon:0 [lucas@lucas-ThinkPad-W520]/home/lucas$ ifconfig eth0 Link encap:Ethernet HWaddr f0:de:f1:b2:53:53 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f2de:f1ff:feb2:5353/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:980003 errors:0 dropped:0 overruns:0 frame:0 TX packets:498384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1320506168 (1.3 GB) TX bytes:59780591 (59.7 MB) Interrupt:20 Memory:f3a00000-f3a20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:21927 errors:0 dropped:0 overruns:0 frame:0 TX packets:21927 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1781719 (1.7 MB) TX bytes:1781719 (1.7 MB) wlan0 Link encap:Ethernet HWaddr 24:77:03:29:8f:dc inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2677:3ff:fe29:8fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11828 errors:0 dropped:0 overruns:0 frame:0 TX packets:15444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4855662 (4.8 MB) TX bytes:2250585 (2.2 MB) [lucas@lucas-ThinkPad-W520]/home/lucas$ lspci -nn | grep 0280 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) [lucas@lucas-ThinkPad-W520]/home/lucas$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no with ethernet unplugged: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0 with ethernet plugged in: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 [lucas@lucas-ThinkPad-W520]/home/lucas$ nm-tool NetworkManager Tool State: connected (global) - Device: wlan0 [tg] ---------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: no HW Address: 24:77:03:29:8F:DC Capabilities: Speed: 52 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) tatum: Infra, 40:8B:07:D8:A5:04, Freq 2437 MHz, Rate 54 Mb/s, Strength 42 W PA WPA2 ums: Infra, 00:20:A6:72:52:BF, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 Alpha 40: Infra, 28:CF:E9:86:59:5D, Freq 5260 MHz, Rate 54 Mb/s, Strength 30 W PA WPA2 thepromiselan: Infra, 58:6D:8F:51:E5:54, Freq 2452 MHz, Rate 54 Mb/s, Strength 34 $ PA WPA2 xfinitywifi: Infra, 06:1D:D5:84:27:A0, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 *tg: Infra, 00:02:6F:83:F8:F4, Freq 2462 MHz, Rate 54 Mb/s, Strength 73 W PA2 ums: Infra, 00:20:A6:A1:9F:25, Freq 2452 MHz, Rate 54 Mb/s, Strength 44 BRIAN-PC_Network:Infra, 20:AA:4B:DD:93:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 35 W PA2 HOME-C0F8: Infra, 44:32:C8:D2:C0:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 40 W PA WPA2 abcsexy: Infra, 28:28:5D:27:5D:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 W PA WPA2 IPv4 Settings: Address: 192.168.0.105 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: F0:DE:F1:B2:53:53 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1

Read the article

OTN ArchBeat Top 10 for September 2012

- by Bob Rhubart

The results are in... Listed below are the Top 10 most popular items shared via the OTN ArchBeat Facebook Page for the month of September 2012. The Real Architects of Los Angeles - OTN Architect Day - Oct 25 No gossip. No drama. No hair pulling. Just a full day of technical sessions and peer interaction focused on using Oracle technologies in today's cloud and SOA architectures. The event is free, but seating is limited, so register now. Thursday October 25, 2012. 8:00 a.m. – 5:00 p.m. Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048. Oracle Fusion Middleware Security: Attaching OWSM policies to JRF-based web services clients "OWSM (Oracle Web Services Manager) is Oracle's recommended method for securing SOAP web services," says Oracle Fusion Middleware A-Team member Andre Correa. "It provides agents that encapsulate the necessary logic to interact with the underlying software stack on both service and client sides. Such agents have their behavior driven by policies. OWSM ships with a bunch of policies that are adequate to most common real world scenarios." His detailed post shows how to make it happen. Oracle 11gR2 RAC on Software Defined Network (SDN) (OpenvSwitch, Floodlight, Beacon) | Gilbert Stan "The SDN [software defined network] idea is to separate the control plane and the data plane in networking and to virtualize networking the same way we have virtualized servers," explains Gil Standen. "This is an idea whose time has come because VMs and vmotion have created all kinds of problems with how to tell networking equipment that a VM has moved and to preserve connectivity to VPN end points, preserve IP, etc." H/T to Oracle ACE Director Tim Hall for the recommendation. Process Oracle OER Events using a simple Web Service | Bob Webster Bob Webster's post "provides an example of a simple web service that processes Oracle Enterprise Repository (OER) Events. The service receives events from OER and utilizes the OER REX API to implement simple OER automations for selected event types." Understanding Oracle BI 11g Security vs Legacy Oracle BI 10g | Christian Screen "After conducting a large amount of Oracle BI 10g to Oracle BI 11g upgrades and after writing the Oracle BI 11g book,"says Oracle ACE Christian Screen, "I still continually get asked one of the most basic questions regarding security in Oracle BI 11g; How does it compare to Oracle BI 10g? The trail of questions typically goes on to what are the differences? And, how do we leverage our current Oracle BI 10g security table schema in Oracle BI 11g?" OIM-OAM-OAAM integration using TAP – Request Flow you must understand!! | Atul Kumar Atul Kumar's post addresses "key points and request flow that you must understand" when integrating three Oracle Identity Management product Oracle Identity Management, Oracle Access Management, and Oracle Adaptive Access Manager. Adding a runtime LOV for a taskflow parameter in WebCenter | Yannick Ongena Oracle ACE Yannick Ongena illustrates how to customize the parameters tab for a taskflow in WebCenter. Tips on Migrating from AquaLogic .NET Accelerator to WebCenter WSRP Producer for .NET | Scott Nelson "It has been a very winding path and this blog entry is intended to share both the lessons learned and relevant approaches that led to those learnings," says Scott Nelson. "Like most journeys of discovery, it was not a direct path, and there are notes to let you know when it is practical to skip a section if you are in a hurry to get from here to there." 15 Lessons from 15 Years as a Software Architect | Ingo Rammer In this presentation from the GOTO Conference in Copenhagen, Ingo Rammer shares 15 tips regarding people, complexity and technology that he learned doing software architecture for 15 years. WebCenter Content (WCC) Trace Sections | ECM Architect ECM Architect Kevin Smith shares a detailed technical post covering WebCenter Content (WCC) Trace Sections. Thought for the Day "Eventually everything connects - people, ideas, objects. The quality of the connections is the key to quality per se." — Charles Eames (June 17, 1907 – August 21, 1978) Source: SoftwareQuotes.com

Read the article

PASS: Bylaw Changes

- by Bill Graziano

While you’re reading this, a post should be going up on the PASS blog on the plans to change our bylaws. You should be able to find our old bylaws, our proposed bylaws and a red-lined version of the changes. We plan to listen to feedback until March 31st. At that point we’ll decide whether to vote on these changes or take other action. The executive summary is that we’re adding a restriction to prevent more than two people from the same company on the Board and eliminating the Board’s Officer Appointment Committee to have Officers directly elected by the Board. This second change better matches how officer elections have been conducted in the past. The Gritty Details Our scope was to change bylaws to match how PASS actually works and tackle a limited set of issues. Changing the bylaws is hard. We’ve been working on these changes since the March board meeting last year. At that meeting we met and talked through the issues we wanted to address. In years past the Board has tried to come up with language and then we’ve discussed and negotiated to get to the result. In March, we gave HQ guidance on what we wanted and asked them to come up with a starting point. Hannes worked on building us an initial set of changes that we could work our way through. Discussing changes like this over email is difficult wasn’t very productive. We do a much better job on this at the in-person Board meetings. Unfortunately there are only 2 or 3 of those a year. In August we met in Nashville and spent time discussing the changes. That was also the day after we released the slate for the 2010 election. The discussion around that colored what we talked about in terms of these changes. We talked very briefly at the Summit and again reviewed and revised the changes at the Board meeting in January. This is the result of those changes and discussions. We made numerous small changes to clean up language and make wording more clear. We also made two big changes. Director Employment Restrictions The first is that only two people from the same company can serve on the Board at the same time. The actual language in section VI.3 reads: A maximum of two (2) Directors who are employed by, or who are joint owners or partners in, the same for-profit venture, company, organization, or other legal entity, may concurrently serve on the PASS Board of Directors at any time. The definition of “employed” is at the sole discretion of the Board. And what a mess this turns out to be in practice. Our membership is a hodgepodge of interlocking relationships. Let’s say three Board members get together and start a blog service for SQL Server bloggers. It’s technically for-profit. Let’s assume it makes $8 in the first year. Does that trigger this clause? (Technically yes.) We had a horrible time trying to write language that covered everything. All the sample bylaws that we found were just as vague as this. That led to the third clause in this section. The first sentence reads: The Board of Directors reserves the right, strictly on a case-by-case basis, to overrule the requirements of Section VI.3 by majority decision for any single Director’s conflict of employment. We needed some way to handle the trivial issues and exercise some judgment. It seems like a public vote is the best way. This discloses the relationship and gets each Board member on record on the issue. In practice I think this clause will rarely be used. I think this entire section will only be invoked for actual employment issues and not for small side projects. In either case we have the mechanisms in place to handle it in a public, transparent way. That’s the first and third clauses. The second clause says that if your situation changes and you fall afoul of this restriction you need to notify the Board. The clause further states that if this new job means a Board members violates the “two-per-company” rule the Board may request their resignation. The Board can also allow the person to continue serving with a majority vote. I think this will also take some judgment. Consider a person switching jobs that leads to three people from the same company. I’m very likely to ask for someone to resign if all three are two weeks into a two year term. I’m unlikely to ask anyone to resign if one is two weeks away from ending their term. In either case, the decision will be a public vote that we can be held accountable for. One concern that was raised was whether this would affect someone choosing to accept a job. I think that’s a choice for them to make. PASS is clearly stating its intent that only two directors from any one organization should serve at any time. Once these bylaws are approved, this policy should not come as a surprise to any potential or current Board members considering a job change. This clause isn’t perfect. The biggest hole is business relationships that aren’t defined above. Let’s say that two employees from company “X” serve on the Board. What happens if I accept a full-time consulting contract with that company? Let’s assume I’m working directly for one of the two existing Board members. That doesn’t violate section VI.3. But I think it’s clearly the kind of relationship we’d like to prevent. Unfortunately that was even harder to write than what we have now. I fully expect that in the next revision of the bylaws we’ll address this. It just didn’t make it into this one. Officer Elections The officer election process received a slightly different rewrite. Our goal was to codify in the bylaws the actual process we used to elect the officers. The officers are the President, Executive Vice-President (EVP) and Vice-President of Marketing. The Immediate Past President (IPP) is also an officer but isn’t elected. The IPP serves in that role for two years after completing their term as President. We do that for continuity’s sake. Some organizations have a President-elect that serves for one or two years. The group that founded PASS chose to have an IPP. When I started on the Board, the Nominating Committee (NomCom) selected the slate for the at-large directors and the slate for the officers. There was always one candidate for each officer position. It wasn’t really an election so much as the NomCom decided who the next person would be for each officer position. Behind the scenes the Board worked to select the best people for the role. In June 2009 that process was changed to bring it line with what actually happens. An Officer Appointment Committee was created that was a subset of the Board. That committee would take time to interview the candidates and present a slate to the Board for approval. The majority vote of the Board would determine the officers for the next two years. In practice the Board itself interviewed the candidates and conducted the elections. That means it was time to change the bylaws again. Section VII.2 and VII.3 spell out the process used to select the officers. We use the phrase “Officer Appointment” to separate it from the Director election but the end result is that the Board elects the officers. Section VII.3 starts: Officers shall be appointed bi-annually by a majority of all the voting members of the Board of Directors. Everything else revolves around that sentence. We use the word appoint but they truly are elected. There are details in the bylaws for term limits, minimum requirements for President (1 prior term as an officer), tie breakers and filling vacancies. In practice we will have an election for President, then an election for EVP and then an election for VP Marketing. That means that losing candidates will be able to fall down the ladder and run for the next open position. Another point to note is that officers aren’t at-large directors. That means if a current sitting officer loses all three elections they are off the Board. Having Board member votes public will help with the transparency of this approach. This process has a number of positive and negatives. The biggest concern I expect to hear is that our members don’t directly choose the officers. I’m going to try and list all the positives and negatives of this approach. Many non-profits value continuity and are slower to change than a business. On the plus side this promotes that. On the negative side this promotes that. If we change too slowly the members complain that we aren’t responsive. If we change too quickly we make mistakes and fail at various things. We’ve been criticized for both of those lately so I’m not entirely sure where to draw the line. My rough assumption to this point is that we’re going too slow on governance and too quickly on becoming “more than a Summit.” This approach creates competition in the officer elections. If you are an at-large director there is no consequence to losing an election. If you are an officer the only way to stay on the Board is to win an officer election or an at-large election. If you are an officer and lose an election you can always run for the next office down. This makes it very easy for multiple people to contest an election. There is value in a person moving through the officer positions up to the Presidency. Having the Board select the officers promotes this. The down side is that it takes a LOT of time to get to the Presidency. We’ve had good people struggle with burnout. We’ve had lots of discussion around this. The process as we’ve described it here makes it possible for someone to move quickly through the ranks but doesn’t prevent people from working their way up through each role. We talked long and hard about having the officers elected by the members. We had a self-imposed deadline to complete these changes prior to elections this summer. The other challenge was that our original goal was to make the bylaws reflect our actual process rather than create a new one. I believe we accomplished this goal. We ran out of time to consider this option in the detail it needs. Having member elections for officers needs a number of problems solved. We would need a way for candidates to fall through the election. This is what promotes competition. Without this few people would risk an election and we’ll be back to one candidate per slot. We need to do this without having multiple elections. We may be able to copy what other organizations are doing but I was surprised at how little I could find on other organizations. We also need a way for people that lose an officer election to win an at-large election. Otherwise we’ll have very little competition for officers. This brings me to an area that I think we as a Board haven’t done a good job. We haven’t built a strong process to tell you who is doing a good job and who isn’t. This is a double-edged sword. I don’t want to highlight Board members that are failing. That’s not a good way to get people to volunteer and run for the Board. But I also need a way let the members make an informed choice about who is doing a good job and would make a good officer. Encouraging Board members to blog, publishing minutes and making votes public helps in that regard but isn’t the final answer. I don’t know what the final answer is yet. I do know that the Board members themselves are uniquely positioned to know which other Board members are doing good work. They know who speaks up in meetings, who works to build consensus, who has good ideas and who works with the members. What I Could Do Better I’ve learned a lot writing this about how we communicated with our members. The next time we revise the bylaws I’d do a few things differently. The biggest change would be to provide better documentation. The March 2009 minutes provide a very detailed look into what changes we wanted to make to the bylaws. Looking back, I’m a little surprised at how closely they matched our final changes and covered the various arguments. If you just read those you’d get 90% of what we eventually changed. Nearly everything else was just details around implementation. I’d also consider publishing a scope document defining exactly what we were doing any why. I think it really helped that we had a limited, defined goal in mind. I don’t think we did a good job communicating that goal outside the meeting minutes though. That said, I wish I’d blogged more after the August and January meeting. I think it would have helped more people to know that this change was coming and to be ready for it. Conclusion These changes address two big concerns that the Board had. First, it prevents a single organization from dominating the Board. Second, it codifies and clearly spells out how officers are elected. This is the process that was previously followed but it was somewhat murky. These changes bring clarity to this and clearly explain the process the Board will follow. We’re going to listen to feedback until March 31st. At that time we’ll decide whether to approve these changes. I’m also assuming that we’ll start another round of changes in the next year or two. Are there other issues in the bylaws that we should tackle in the future?

Read the article

wifi hardware switch doesn't work on a Dell 1018

- by user42566

I have a problem with my Dell 1018 Inspiron. I can't switch the wifi on, through the key on the keyboard. I think it's a driver problem since Ubuntu 11.10. This are the versions i tried: Ubuntu 10.04 / 10.10 It's possible to install the driver by hand: sudo add-apt-repository ppa:lexical/hwe-wireless sudo apt-get update sudo apt-get install rtl8192ce-dkms Ubuntu 11.04 It works out of the box Ubuntu 11.10 / 12.04 I haven’t found any solution for these versions. The "ppa:lexical/hwe-wireless" doesn't work for these versions. It says Can not find package rtl8192ce-dkms. The window of additional drivers is empty. So I can't install the driver. The wired network works good. Here is some information: 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes sudo lshw -class network *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 05 serial: 5c:26:0a:0d:20:10 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0f2c000-f0f2cfff memory:f0f18000-f0f1bfff *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 01 serial: 70:f1:a1:fe:15:bd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-22-generic-pae firmware=N/A ip=192.168.1.76 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:3000(size=256) memory:f0100000-f0103fff mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] 00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 07:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 174f:1127 Syntek mark@mark-Inspiron-1018:~$

Read the article

Expanding the Partner Ecosystem with Third-Party Plug-ins

- by Joe Diemer

Oracle Enterprise Manager’s extensibility capabilities are designed to allow customers and partners to adapt Enterprise Manager for management of heterogeneous environments with Plug-ins and Connectors. Third-party developers continue to take advantage of Oracle Enterprise Manager’s Extensibility Development Kit (EDK) to build plug-ins to Enterprise Manager 12c, such as F5’s BIG IP Plug-in and Entuity’s Eye of the Storm Network Management Plug-In. Partners can also validate their plug-ins through the Oracle Validated Integration (OVI) program, which assures customers that the plug-in has been tested and is functionally and technically sound, is designed in a reliable and standardized manner, and operates and performs as documented. Two very recent examples of partners which have beta versions of their plug-ins are Blue Medora's VMware vSphere plug-in and the NetApp Storage plug-in. VMware vSphere Plug-in by Blue Medora Blue Medora, an Oracle Partner Network (OPN) “Gold” member, which just announced that it is now signing up customers to try a beta version of their new VMware vSphere plug-in for Enterprise Manager 12c. According to Blue Medora, the vSphere plug-in monitors critical VMware metrics (CPU, Memory, Disk, Network, etc) at the Host, VM, Cluster and Resource Pool levels. It has minimal performance impact via an “agentless” approach that requires no installation directly on VMware servers. It has discovery capabilities for VMware Datacenters, ESX Hosts, Clusters, Virtual Machines, and Datastores. It offers integration of native VMware Events into Enterprise Manager, and it provides over 300 VMware-related health, availability, performance, and configuration metrics. It comes with more than 30 out-of-the-box pre-defined thresholds and can manage VMware via a series of jobs split between cluster, host and VM target types.The company reports that the Enterprise Manager 12c plug-in supports vSphere versions 4.0, 4.5 and 5.0. Platforms supported include Linux 64-bit, Windows, AIX and Solaris SPARC and x86. Information about the plug-in, including how to sign up for the beta, is available at their web site at http://bluemedora.com after selecting the "Products" tab. NetApp Storage Plug-in NetApp believes the combination of storage system monitoring with comprehensive management of Oracle systems with Enterprise Manager will help customers reduce the cost and complexity of managing applications that rely on NetApp storage and Oracle technologies. So, NetApp built a plug-in and reports that it has comprehensive availability and performance information for NetApp storage systems. Using the plug-in, Oracle Enterprise Manager customers with NetApp storage solutions can track the association between databases and storage components and thereby respond to faults and IO performance bottlenecks quickly. With the latest configuration management capabilities, one can also perform drift analysis to make sure all storage systems are configured as per established gold standards. The company is also now signing up beta customers, which can be done at the NetApp Communities site at https://communities.netapp.com/groups/netapp-storage-system-plug-in-for-oem12c-beta. Learn More about Enterprise Manager Extensibility More plug-ins from other partners are soon to come, which I'll be reporting on them here. To learn more about Enterprise Manager and how customers and partners can build plug-ins using the EDK to manage a multi-vendor data center, go to http://oracle.com/enterprisemanager in the Heterogeneous Management solution area. The site also lists the plug-ins available with information on how to obtain them. More info about the Oracle Validated Integration program can be found at the OPN Enterprise Manager Knowledge Zone in the "Develop" tab.

Read the article

Windows Azure SDK 1.3 addresses early adopter feedback

- by Eric Nelson

At the end of November 2010 we released a new version of the Windows Azure SDK which contains many new features driven by the great feedback of early adopters plus a shiny new portal. New Portal implemented in Silverlight: The new portal is implemented using Silverlight and replaces the (IMHO rather clunky) original HTML + JavaScript portal. It is 100% better although does still have a few bugs. Enjoy! P.S. You can if you wish still use the old portal: New runtime functionality: The following functionality is now generally available through the Windows Azure SDK and Windows Azure Tools for Visual Studio and the new Windows Azure Management Portal: Elevated Privileges and Full IIS. You can now run a portion or all of your code in Web and Worker roles with elevated administrator privileges. The Web role now provides Full IIS functionality, which enables multiple IIS sites per Web role and the ability to install IIS modules. Remote Desktop functionality enables you to connect to a running instance of your application or service in order to monitor activity and troubleshoot common problems. Windows Server 2008 R2 Roles: Windows Azure now supports Windows Server 2008 R2 in its Web, worker and VM roles. This new support enables you to take advantage of the full range of Windows Server 2008 R2 features such as IIS 7.5, AppLocker, and enhanced command-line and automated management using PowerShell Version 2.0. New runtime functionality – in beta: Windows Azure Virtual Machine Role: Support for more types of new and existing Windows applications will soon be available with the introduction of the Virtual Machine (VM) role. You can move more existing applications to Windows Azure, reducing the need to make costly code or deployment changes. Extra Small Windows Azure Instance, which is priced at $0.05 per compute hour, provides developers with a cost-effective training and development environment. Developers can also use the Extra Small instance to prototype cloud solutions at a lower cost. Windows Azure Connect: (formerly Project Sydney), which enables a simple and easy-to-manage mechanism to set up IP-based network connectivity between on-premises and Windows Azure resources, is the first Windows Azure Virtual Network feature that we’re making available as a CTP. You can sign up for any of the betas via the Windows Azure Management Portal. Improved processes and simplified operations New portal! (see above) Access to new diagnostic information including the ability to click on a role to see role type, deployment time and last reboot time A new sign-up process that dramatically reduces the number of steps needed to sign up for Windows Azure. New scenario based Windows Azure Platform forums to help answer questions and share knowledge more efficiently. Multiple Service Administrators: Windows Azure now supports multiple Windows Live IDs to have administrator privileges on the same Windows Azure account. The objective is to make it easy for a team to work on the same Windows Azure account while using their individual Windows Live IDs. Related Links Please also let us know through Microsoft Platform Ready if and when you intend to build an application using the Windows Azure Platform. Or indeed if you already have (Well done). You will get access to some great benefits if you do (more on that in a future post). It also really helps us better understand the demand out there which directly impacts how we will plan the next six months of activities around the Windows Azure Platform. Visit Microsoft Platform Ready to tell us about your plans for your applications UK based? Interested in the Windows Azure Platform? Join http://ukazure.ning.com Get started with the Windows Azure Platform http://bit.ly/startazure

Read the article

What information must never appear in logs?

- by MainMa

I'm about to write the company guidelines about what must never appear in logs (trace of an application). In fact, some developers try to include as many information as possible in trace, making it risky to store those logs, and extremely dangerous to submit them, especially when the customer doesn't know this information is stored, because she never cared about this and never read documentation and/or warning messages. For example, when dealing with files, some developers are tempted to trace the names of the files. For example before appending file name to a directory, if we trace everything on error, it will be easy to notice for example that the appended name is too long, and that the bug in the code was to forget to check for the length of the concatenated string. It is helpful, but this is sensitive data, and must never appear in logs. In the same way: Passwords, IP addresses and network information (MAC address, host name, etc.)¹, Database accesses, Direct input from user and stored business data must never appear in trace. So what other types of information must be banished from the logs? Are there any guidelines already written which I can use? ¹ Obviously, I'm not talking about things as IIS or Apache logs. What I'm talking about is the sort of information which is collected with the only intent to debug the application itself, not to trace the activity of untrusted entities. Edit: Thank you for your answers and your comments. Since my question is not too precise, I'll try to answer the questions asked in the comments: What I'm doing with the logs? The logs of the application may be stored in memory, which means either in plain on hard disk on localhost, in a database, again in plain, or in Windows Events. In every case, the concern is that those sources may not be safe enough. For example, when a customer runs an application and this application stores logs in plain text file in temp directory, anybody who has a physical access to the PC can read those logs. The logs of the application may also be sent through internet. For example, if a customer has an issue with an application, we can ask her to run this application in full-trace mode and to send us the log file. Also, some application may sent automatically the crash report to us (and even if there are warnings about sensitive data, in most cases customers don't read them). Am I talking about specific fields? No. I'm working on general business applications only, so the only sensitive data is business data. There is nothing related to health or other fields covered by specific regulations. But thank you to talk about that, I probably should take a look about those fields for some clues about what I can include in guidelines. Isn't it easier to encrypt the data? No. It would make every application much more difficult, especially if we want to use C# diagnostics and TraceSource. It would also require to manage authorizations, which is not the easiest think to do. Finally, if we are talking about the logs submitted to us from a customer, we must be able to read the logs, but without having access to sensitive data. So technically, it's easier to never include sensitive information in logs at all and to never care about how and where those logs are stored.

Read the article

Managing Oracle Exalogic Elastic Cloud with Oracle Enterprise Manager Ops Center

- by Anand Akela

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle Enterprise Manager Ops Center 12c now comes out-of-the-box with the latest release of Oracle Exalogic Elastic Cloud 2.0.1 software. It allows Customer to manage and monitor all components inside the Exalogic rack, including provisioning and management of physical and virtualized server. Ops Center will allow Customers to easily get started with creating and managing Private Clouds using the Exalogic components. Here is a snaphot of the Assets view showing the managable components of a Quarter Rack with 8 Compute Nodes: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A colleague has recently posted an interesting series of "Exalogic 2.0.1 Tea Break Snippets" which will guide you through the initial steps to get started with setting up your Exalogic environment: Exalogic 2.0.1 Tea Break Snippets - Creating Cloud Users https://blogs.oracle.com/ATeamExalogic/entry/exalogic_2_0_1_tea1 Exalogic 2.0.1 Tea Break Snippets - Creating Networks https://blogs.oracle.com/ATeamExalogic/entry/exalogic_2_0_1_tea2 Exalogic 2.0.1 Tea Break Snippets - Allocating Static IP Addresses https://blogs.oracle.com/ATeamExalogic/entry/exalogic_2_0_1_tea3 Exalogic 2.0.1 Tea Break Snippets - Creating Accounts https://blogs.oracle.com/ATeamExalogic/entry/exalogic_2_0_1_tea4 Exalogic 2.0.1 Tea Break Snippets - Importing Public Server Template https://blogs.oracle.com/ATeamExalogic/entry/exalogic_2_0_1_tea5 Have fun reading these very useful postings ! Dr. Jürgen Fleischer , Oracle Enterprise Manager Ops Center Engineering Stay Connected: Twitter | Face book | You Tube | Linked in | Newsletter

Read the article

Hardware wireless switch has no effect after suspend and 13.10 upgrade

- by blaineh

This seems to be a fairly chronic problem, as shown by the following questions: How do I fix a "Wireless is disabled by hardware switch" error? Wireless disabled by hardware switch "Wireless disabled by hardware switch" after suspend and other hardware buttons ineffective - how can I solve this? but no good solutions have been found! Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. All My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A ip=155.99.215.79 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. xev shows that no internal event is triggered for my wireless switch (f12), but other function keys also acting as hardware switches work fine. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. I just tried to reload bios defaults (or something) as shown by this video. Didn't work. Edit. I tried the contents of this answer, and it didn't work. Edit. I made a pastebin of dmesg. I couldn't even begin to understand the contents. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

Read the article

Friday Tips #6, Part 1

- by Chris Kawalek

We have a two parter this week, with this post focusing on desktop virtualization and the next one on server virtualization. Question: Why would I use the Oracle Secure Global Desktop Secure Gateway? Answer by Rick Butland, Principal Sales Consultant, Oracle Desktop Virtualization: Well, for the benefit of those who might not be familiar with client connections in Oracle Secure Global Desktop (SGD), let me back up and briefly explain. An SGD client connects to an SGD server using two distinct protocols, which, by default, require two distinct TCP ports. The first is the HTTP protocol, used by the web browser to connect to the SGD webserver on TCP port 80, or if secure connections are enabled (SSL/TLS), then TCP port 443, commonly identified as the "HTTPS" port, that is, "SSL encrypted HTTP." The second protocol from the client to the server is the Adaptive Internet Protocol, or AIP, which is used for displaying applications, transferring drive mapping data, print jobs, and so on. By default, AIP uses the TCP port 3104, or port 5307 when SSL is enabled. When SGD clients need to access SGD over a firewall, the ports that AIP requires are typically "closed"; and most administrators are reluctant, to put it mildly, to change their firewall configurations to allow AIP traffic on 3144/5307. To avoid this problem, SGD introduced "Firewall Forwarding", a technique where, in effect, both http and AIP traffic are "multiplexed" onto a single "well-known" TCP port, that is port 443, the https port. This is also known as single-port firewall traversal. This technique takes advantage of the fact that, as a "well-known service", port 443 is usually "open", allowing (encrypted) traffic to pass. At the target SGD server, the two protocols are de-multiplexed and routed appropriately. The Secure Gateway was developed in response to requirements from customers for SGD to support multi-stage DMZ's, and to avoid exposing SGD servers and the information they contain directly to connections from the Internet. The Secure Gateway acts as a reverse-proxy in the first-tier of the DMZ, accepting, authenticating, and terminating incoming client connections, and then re-encrypting the connections, and proxying them, routing them on to SGD servers, deeper in the network. The client no longer needs to know the name/IP address of the SGD servers in their network, they connect to the gateway, only. The gateway takes care of those internal network details. The Secure Gateway supports the same "single-port firewall" capability as does "Firewall Forwarding", but offers the additional advantage of load-balancing incoming client connections amongst SGD array members, which could be cumbersome without a forward-deployed secure gateway. Load-balancing weights and policies can be monitored and tuned using the "Balancer Manager" application, and Apache mod_proxy_balancer directives. Going forward, our architects recommend the use of the Secure Gateway over "Firewall Forwarding" for single-port firewall traversal, due to its architectural advantages, its greater flexibility and enhanced features. Finally, it should be noted that the Secure Gateway is not separately priced; any licensed SGD customer may use the Secure Gateway component at no additional cost. For more information, see the "Secure Gateway Administrator's Guide".

Read the article

Dell 3721 Wifi problem Ubuntu 13.04

- by Sebastian

I have a Dell 3721 which comes original with windows 8. I managed it to install ubuntu 12.10 on this laptop, even there was no out of the box drivers. With 12.10 I was forces to install this .deb package couple of times. After installing it, it was ok for some weeks before I have to install it again. Maybe some security updates destroy something which made in necessary to install it again... http://jas.gemnetworks.com/debian/pool/main/w/wireless-bcm43142/wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb My problem is, that this package isnt working with ubuntu 13.04 anymore. So I cant use Wifi now. Also my display is almost dark, I cant change the brightness level with ubuntu 13.04. Hope you can give me some advice. Dell:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) @Dell:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0a5c:21d7 Broadcom Corp. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0c45:64ad Microdia @Dell:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) @Dell:~$ sudo lshw -class network *-network Beschreibung: Ethernet interface Produkt: RTL8101E/RTL8102E PCI Express Fast Ethernet controller Hersteller: Realtek Semiconductor Co., Ltd. Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Logischer Name: eth0 Version: 05 Seriennummer: xx:xx:xx:xx:xx:xx Größe: 100Mbit/s Kapazität: 100Mbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s Ressourcen: irq:42 ioport:2000(Größe=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network UNGEFORDERT Beschreibung: Network controller Produkt: BCM43142 802.11b/g/n Hersteller: Broadcom Corporation Physische ID: 0 Bus-Informationen: pci@0000:02:00.0 Version: 01 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress bus_master cap_list Konfiguration: latency=0 Ressourcen: memory:c0500000-c0507fff

Read the article

Wireless cycling between connected and disconnected

- by Tony Kilgore

My friend has a Acer Aspire 5733Z-4851 it keeps disconnecting and connecting to his wifi but his hard wire will run just fine. Any suggestions? All the codes: lspci: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) lsmod: Module Size Used by snd_seq_dummy 12798 0 rfcomm 46619 0 bnep 18140 2 bluetooth 209199 10 rfcomm,bnep parport_pc 32688 0 ppdev 17073 0 lp 17759 0 parport 46345 3 parport_pc,ppdev,lp binfmt_misc 17500 1 ums_realtek 17949 0 snd_hda_codec_realtek 77876 1 uas 17844 0 coretemp 13400 0 snd_hda_intel 33491 4 snd_hda_codec 134212 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 96580 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30512 1 snd_seq_midi uvcvideo 76749 0 videobuf2_core 32851 1 uvcvideo videodev 120309 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12860 1 uvcvideo videobuf2_memops 13368 1 videobuf2_vmalloc snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61521 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event snd_timer 29425 2 snd_pcm,snd_seq arc4 12529 2 snd_seq_device 14497 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq psmouse 95552 0 ath9k 131308 0 tg3 148780 0 snd 78734 17 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device microcode 22803 0 mac80211 539908 1 ath9k ath9k_common 14055 1 ath9k ath9k_hw 395218 2 ath9k,ath9k_common ath 23827 3 ath9k,ath9k_common,ath9k_hw i915 520629 3 soundcore 15047 1 snd serio_raw 13215 0 cfg80211 206566 3 ath9k,mac80211,ath snd_page_alloc 18484 2 snd_hda_intel,snd_pcm intel_ips 18049 0 lpc_ich 17061 0 drm_kms_helper 46784 1 i915 drm 275528 4 i915,drm_kms_helper mei 40690 0 i2c_algo_bit 13413 1 i915 joydev 17457 0 acer_wmi 32453 0 sparse_keymap 13890 1 acer_wmi mxm_wmi 12979 0 mac_hid 13205 0 wmi 19070 2 acer_wmi,mxm_wmi video 19335 2 i915,acer_wmi usb_storage 48838 1 ums_realtek sudo lshw -C network: *-network description: Ethernet interface product: NetLink BCM57780 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: b8:70:f4:9a:35:b6 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=half firmware=sb latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:44 memory:d3400000-d340ffff[/QUOTE][QUOTE]*-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 68:a3:c4:eb:60:7d width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-19-generic firmware=N/A ip=192.168.0.168 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d2400000-d240ffff)

Read the article

Replicating between Cloud and On-Premises using Oracle GoldenGate

- by Ananth R. Tiru

Do you have applications running on the cloud that you need to connect with the on premises systems. The most likely answer to this question is an astounding YES! If so, then you understand the importance of keep the data fresh at all times across the cloud and on-premises environments. This is also one of the key focus areas for the new GoldenGate 12c release which we announced couple of week ago via a press release. Most enterprises have spent years avoiding the data “silos” that inhibit productivity. For example, an enterprise which has adopted a CRM strategy could be relying on an on-premises based marketing application used for developing and nurturing leads. At the same time it could be using a SaaS based Sales application to create opportunities and quotes. The sales and the marketing teams which use these systems need to be able to access and share the data in a reliable and cohesive way. This example can be extended to other applications areas such as HR, Supply Chain, and Finance and the demands the users place on getting a consistent view of the data. When it comes to moving data in hybrid environments some of the key requirements include minimal latency, reliability and security: Data must remain fresh. As data ages it becomes less relevant and less valuable—day-old data is often insufficient in today’s competitive landscape. Reliability must be guaranteed despite system or connectivity issues that can occur between the cloud and on-premises instances. Security is a key concern when replicating between cloud and on-premises instances. There are several options to consider when replicating between the cloud and on-premises instances. Option 1 – Secured network established between the cloud and on-premises A secured network is established between the cloud and on-premises which enables the applications (including replication software) running on the cloud and on-premises to have seamless connectivity to other applications irrespective of where they are physically located. Option 2 – Restricted network established between the cloud and on-premises A restricted network is established between the cloud and on-premises instances which enable certain ports (required by replication) be opened on both the cloud and on the on-premises instances and white lists the IP addresses of the cloud and on-premises instances. Option 3 – Restricted network access from on-premises and cloud through HTTP proxy This option can be considered when the ports required by the applications (including replication software) are not open and the cloud instance is not white listed on the on-premises instance. This option of tunneling through HTTP proxy may be only considered when proper security exceptions are obtained. Oracle GoldenGate Oracle GoldenGate is used for major Fortune 500 companies and other industry leaders worldwide to support mission-critical systems for data availability and integration. Oracle GoldenGate addresses the requirements for ensuring data consistency between cloud and on-premises instances, thus facilitating the business process to run effectively and reliably. The architecture diagram below illustrates the scenario where the cloud and the on-premises instance are connected using GoldenGate through a secured network In the above scenario, Oracle GoldenGate is installed and configured on both the cloud and the on-premises instances. On the cloud instance Oracle GoldenGate is installed and configured on the machine where the database instance can be accessed. Oracle GoldenGate can be configured for unidirectional or bi-directional replication between the cloud and on premises instances. The specific configuration details of Oracle GoldenGate processes will depend upon the option selected for establishing connectivity between the cloud and on-premises instances. The knowledge article (ID - 1588484.1) titled ' Replicating between Cloud and On-Premises using Oracle GoldenGate' discusses in detail the options for replicating between the cloud and on-premises instances. The article can be found on My Oracle Support. To learn more about Oracle GoldenGate 12c register for our launch webcast where we will go into these new features in more detail. You may also want to download our white paper "Oracle GoldenGate 12c Release 1 New Features Overview" I would love to hear your requirements for replicating between on-premises and cloud instances, as well as your comments about the strategy discussed in the knowledge article to address your needs. Please post your comments in this blog or in the Oracle GoldenGate public forum - https://forums.oracle.com/community/developer/english/business_intelligence/system_management_and_integration/goldengate

Search Results

Search found 11906 results on 477 pages for 'ip restrictions'.

Page 447/477 | < Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454 | Next Page >

- by Neeraj Gupta

- by Simon Cooper

- by Pranit Bauva

- by Geoff N. Hiten

- by Ratman21

- by JuergenKress

- by simogasp

- by Javier Treviño

- by Frederic Pariente

- by GeekAgilistMercenary

- by Jeff Taylor-Oracle

- by Lucas

- by Bob Rhubart

- by Bill Graziano

- by user42566

- by Joe Diemer

- by Eric Nelson

- by MainMa

- by Anand Akela

- by blaineh

- by Chris Kawalek

- by Sebastian

- by Tony Kilgore

- by Ananth R. Tiru

< Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454 | Next Page >