Search Results

Search found 12397 results on 496 pages for 'maybe'.

Page 448/496 | < Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >

• Scoping a home dev server

  - by AbhikRK

  Hi. I’m looking to build a multi-purpose home development server. In this post, I’m looking to outline what I want from such a system, and the ‘why’s of it, to some limited extent, and finally, some rudiments of how I’m looking to go about that. I’m mostly a developer, with just about some sysadmin familiarity. So, please excuse, correct me, and suggest on any ignorance which would come across in the following ;-) It will serve the following goals to start with:- NAS (Looking at using ZFS) Source control repo e.g Git server Database e.g MySQL server Continuous Integration e.g Hudson server Other stuff as and when they come up e.g RabbitMQ etc A development sandbox to play around with new stuff I want to achieve a high uptime for 2-5 as much as possible. They should run as independent services and with minimal maintenance. (e.g TurnKey Linux appliances) I’m thinking of running them as individual Xen DomUs. Then, maybe the NAS can be a Dom0 and 6 can be another DomU. The User for this would be mostly me. I can see 2-4 being sometimes used by 2-3 users, but that would be infrequent. I’m looking for a repeatable setup. Ideally I’d like to automate this setup through Chef or Puppet or something similar. Once everything runs, I want to be able to ssh/screen/tmux into 1-6 from my laptop or any other computer on the LAN/on-the-go. My queries are:- Is putting 1-6, all of them on a single box, a good idea? If so, what kind of hardware should I be looking at, for a low-cost, low-power setup? Although not at present, but in future I might be looking at adding audio/media servers to the mix. Would that impact the answers to 1? I have an old Pentium 3 and 810e motherboard combination. Is there any way I could put it to use? I had a look at the Sheevaplug, and was wondering if I could split off the NAS on its own using that. But ruled it out preliminarily due to its reported heating issues. Is it something i should still consider? Thanks in advance

  Read the article

• USB mouse connecting and disconnecting randomly

  - by Kalec

  I've bought an acer aspire 5742G about 2 months ago or so and it's been running great, but sometimes I used to hear the windows error beep but I had no idea what was causing it since the "bug" was automatically fixed so fast I couldn't even see an error message (also it kinda always happened when I was busy also, either in a game or while doing my homework). Later on my mouse would simply not work for 3-5 seconds then work again, I thought nothing of it at the time. I also had a problem where it only worked in one usb and one only. To move it I had to remove the battery, unplug the laptop and hold the power button for 2 minutes to reset the bios settings. Since today though it went nuts. Sometimes it disconnects / reconnects 12 times in 10 seconds and windows just keeps beeping till I unplug it, then it runs smooth for 5-6 minutes then it goes nuts again. Other times it seems like it skips (disconnects for a fraction of a second) other times just for 2-3 seconds. But this is incredibly frustrating. Sometimes the power just goes down (the laser turns off) and well that at least I would understand but this is a rare occurrence. Now I know the usb ports work since I have a lot of other devices connected and I tried the mouse on a room m8's laptop so the mouse also works. My only conclusion is that it's an operating system / settings bug and / or problem (I have tried the mouse in all ports by the way). All drivers and bios are up to date (maybe except mouse but I can't seem to update that and the mouse has no name, just a serial number which helps with nothing. Still it worked till today and nothing should have changed any way). I have made sure windows can't shut it down to save power (in device management). Also I tried to delete the drivers and re-install them, rebooting and the power button trick but nothing. Most I have done is get rid of the 12 disconnects / reconnects every 10 seconds :) but that's all :( I would buy a new one but I'm afraid it might do the same thing. ****EDIT****** Tried the mouse again at a friend but now it didn't even install it's software nor did the update work. Think I'll just buy a new one but I'd still like a suggestion at least so I'll leave this open #### EDIT 2 Now it works again, I can't explain this. Still thinking of getting a new one though

  Read the article

• PC monitors shut off and system hangs while playing 3D games, but sound continues - Diagnosis?

  - by Jon Schneider

  Two days ago, I started running into a problem with my Windows PC: The PC's two connected monitors simultaneously lose signal and go black (as though the PC had been powered off). The keyboard's Numlock, Capslock, and Scroll Lights will become "stuck" in their current positions, as though the PC is hung. (For example, the Numlock light on the keyboard remains lit regardless of me pressing the Numlock key repeatedly.) No keyboard input does anything. (Ctrl+Alt+Del, Ctrl+Shift+Esc, Ctrl+C, etc.) However -- Whatever sound/music the PC was playing continues to play, and the PC's fans continue running, so the PC hasn't powered itself off or rebooted itself. Opening up the case, the graphics card is pretty hot to the touch. I had this happen 3 times in one evening. In all cases, I was playing a game with 3D graphics when the problem occurred (Torchlight, Minecraft, Magic: The Gathering 2012, Avadon: The Black Fortress demo). I have yet to have the problem happen when I'm not playing a game. This system has been running stable for about 2.5 years prior to this. I didn't make any changes to the system prior to the problem starting to occur. System specs: OS: Windows 7 64-bit Processor: Intel Core 2 Duo E7200 Wolfdale 2.53GHz Video Card: XFX GeForce 9800 GT 512 MB Motherboard: Foxconn P45A-S LGA 775 Intel ATX RAM: Corsair 4 GB (2x 2GB) DDR2-800 (PC2 6400) Full specs: New PC 2008 Troubleshooting tried so far (the problem occurred again after taking each of these steps, one at a time): Updated the video drivers with the latest drivers from NVidia's site. Opened up the case and cleaned out the video card and processor fans (both were pretty dirty). Installed and ran temperature monitor software. The processor idles at about 50 degrees C, and goes up to about 63 degrees C while playing a game (seems on the warm side, but not excessively so?). The software wasn't able to report the temperature of the GPU -- not sure this particular GPU supports software temperature readout? My initial diagnosis is that maybe the GPU is on its last legs (given that it seems to be running pretty hot, and the problem only occurs while playing 3D games). Does this seem likely? Or is it likely that this problem is caused by the processor, RAM, or motherboard? Or could this be a software issue of some kind? Thanks for any advice!

  Read the article

• Scoping a home dev server

  - by AbhikRK

  Hi. I’m looking to build a multi-purpose home development server. In this post, I’m looking to outline what I want from such a system, and the ‘why’s of it, to some limited extent, and finally, some rudiments of how I’m looking to go about that. I’m mostly a developer, with just about some sysadmin familiarity. So, please excuse, correct me, and suggest on any ignorance which would come across in the following ;-) It will serve the following goals to start with:- NAS (Looking at using ZFS) Source control repo e.g Git server Database e.g MySQL server Continuous Integration e.g Hudson server Other stuff as and when they come up e.g RabbitMQ etc A development sandbox to play around with new stuff I want to achieve a high uptime for 2-5 as much as possible. They should run as independent services and with minimal maintenance. (e.g TurnKey Linux appliances) I’m thinking of running them as individual Xen DomUs. Then, maybe the NAS can be a Dom0 and 6 can be another DomU. The User for this would be mostly me. I can see 2-4 being sometimes used by 2-3 users, but that would be infrequent. I’m looking for a repeatable setup. Ideally I’d like to automate this setup through Chef or Puppet or something similar. Once everything runs, I want to be able to ssh/screen/tmux into 1-6 from my laptop or any other computer on the LAN/on-the-go. My queries are:- Is putting 1-6, all of them on a single box, a good idea? If so, what kind of hardware should I be looking at, for a low-cost, low-power setup? Although not at present, but in future I might be looking at adding audio/media servers to the mix. Would that impact the answers to 1? I have an old Pentium 3 and 810e motherboard combination. Is there any way I could put it to use? I had a look at the Sheevaplug, and was wondering if I could split off the NAS on its own using that. But ruled it out preliminarily due to its reported heating issues. Is it something i should still consider? Thanks in advance Have posted this question previously on SuperUser but no responses yet. So was wondering if this is a more apt forum for this.

  Read the article

• RSH between servers not working

  - by churnd

  I have two servers: one CentOS 5.8 & one Solaris 10. Both are joined to my workplace AD domain via PBIS-Open. A user will log into the linux server & run an application which issues commands over RSH to the solaris server. Some commands are also run on the linux server, so both are needed. Due to the application these servers are being used for (proprietary GE software), the software on the linux server needs to be able to issue rsh commands to the solaris server on behalf of the user (the user just runs a script & the rest is automatic). However, rsh is not working for the domain users. It does work for a local user, so I believe I have the necessary trust settings between the two servers correct. However, I can rlogin as a domain user from the linux server to the solaris server. SSH works too (how I wish I could use it). Some relevant info: via rlogin: [user@linux~]$ rlogin solaris connect to address 192.168.1.2 port 543: Connection refused Trying krb4 rlogin... connect to address 192.168.1.2 port 543: Connection refused trying normal rlogin (/usr/bin/rlogin) Sun Microsystems Inc. SunOS 5.10 Generic January 2005 solaris% via rsh: [user@linux ~]$ rsh solaris ls connect to address 192.168.1.2 port 544: Connection refused Trying krb4 rsh... connect to address 192.168.1.2 port 544: Connection refused trying normal rsh (/usr/bin/rsh) permission denied. [user@linux ~]$ relevant snippet from /etc/pam.conf on solaris: # # rlogin service (explicit because of pam_rhost_auth) # rlogin auth sufficient pam_rhosts_auth.so.1 rlogin auth requisite pam_lsass.so set_default_repository rlogin auth requisite pam_lsass.so smartcard_prompt try_first_pass rlogin auth requisite pam_authtok_get.so.1 try_first_pass rlogin auth sufficient pam_lsass.so try_first_pass rlogin auth required pam_dhkeys.so.1 rlogin auth required pam_unix_cred.so.1 rlogin auth required pam_unix_auth.so.1 # # Kerberized rlogin service # krlogin auth required pam_unix_cred.so.1 krlogin auth required pam_krb5.so.1 # # rsh service (explicit because of pam_rhost_auth, # and pam_unix_auth for meaningful pam_setcred) # rsh auth sufficient pam_rhosts_auth.so.1 rsh auth required pam_unix_cred.so.1 # # Kerberized rsh service # krsh auth required pam_unix_cred.so.1 krsh auth required pam_krb5.so.1 # I have not really seen anything useful in either system log that seem to be directly related to the failed login attempt. I've tail -f'd /var/adm/messages on solaris & /var/log/messages on linux during the failed attempts & nothing shows up. Maybe I need to be doing something else?

  Read the article

• Powershell Exchange script returning inconsistent results - PS weirdness

  - by Ian

  Maybe someone can shed some light on a bit of Powershell weirdness I've come across and can't explain. This PS script returns a list of exchange databases, their sizes and the number of mailboxes in each one: Get-MailboxDatabase | Select Server, StorageGroupName, Name, @{Name="Size (GB)";Expression={$objitem = (Get-MailboxDatabase $_.Identity); $path = "`\`\" + $objitem.server + "`\" + $objItem.EdbFilePath.DriveName.Remove(1).ToString() + "$"+ $objItem.EdbFilePath.PathName.Remove(0,2); $size = ((Get-ChildItem $path).length)/1048576KB; [math]::round($size, 2)}}, @{Name="Size (MB)";Expression={$objitem = (Get-MailboxDatabase $_.Identity); $path = "`\`\" + $objitem.server + "`\" + $objItem.EdbFilePath.DriveName.Remove(1).ToString() + "$"+ $objItem.EdbFilePath.PathName.Remove(0,2); $size = ((Get-ChildItem $path).length)/1024KB; [math]::round($size, 2)}}, @{Name="No. Of Mbx";expression={(Get-Mailbox -Database $_.Identity | Measure-Object).Count}} | Format-table –AutoSize If I add a simple 'sort name' before the 'format-table' my resulting table contains blanks where the database sizes and number of mailboxes should appear (not zeros, blank empty space).... but only in some rows, not all rows. Some rows contain numbers! If I put the '|sort name| ' after the initial 'get-mailboxdatabase' it works fine. Whats even weirder is if I do the following: Execute the above command Add the sort before format-table Execute the new command Execute the initial command again What I see is different amounts in each of the three cases - all of which are incorrect. Yet 1 and 3 are the same command and the only difference with 2 is a sort. 1 and 3 should, at a minimum, return the same results. I get blanks where I should have MBs If I add the sort after the get-mailboxdatabase, it always returns identical results (as it should). Can anyone suggest an explanation as to what may be going on? If its of any help in reading the expression, I've reformatted it here to make it a bit more readable: Get-MailboxDatabase | Select Server, StorageGroupName, Name, @{Name="Size (GB)";Expression={ $objitem = (Get-MailboxDatabase $_.Identity); $path = "`\`\" + $objitem.server + "`\" + $objItem.EdbFilePath.DriveName.Remove(1).ToString() + "$" + $objItem.EdbFilePath.PathName.Remove(0,2); $size = ((Get-ChildItem $path).length)/1048576KB; [math]::round($size, 2) }}, @{Name="Size (MB)";Expression={ $objitem = (Get-MailboxDatabase $_.Identity); $path = "`\`\" + $objitem.server + "`\" + $objItem.EdbFilePath.DriveName.Remove(1).ToString() + "$" + $objItem.EdbFilePath.PathName.Remove(0,2); $size = ((Get-ChildItem $path).length)/1024KB; [math]::round($size, 2) }}, @{Name="No. Of Mbx";expression={ (Get-Mailbox -Database $_.Identity | Measure-Object).Count }} | Format-table –AutoSize

  Read the article

• Weird IIS with Windows Authentication + IE problem

  - by Paulius Maruška

  Hello. I have a website running on IIS and using Windows Authentication. All users that are configured to get access to the site are form a AD domain (not local users). In the properties of a Website, I have set to use the AD domain as the realm. Now, when using Firefox, Safari or Chrome - Everything is fine. When the user tries to open the site, he get's the login box. he enters simply "username" and "password" (let's pretend that it's an actual login and password :P) and he get's into the site. When using IE, however, things get nasty. When the user tries to open the site - he get's the login box. User enters the "username" and "password" again, but those get rejected! And when the second time login box pops up - it has the username filled in as "web-server-domain-name\username" which is wrong, because web-server-domain-name is not the domain where all users reside (it's "ad-domain"). I've spent days trying to figure out what's going on... Note, that if I manually enter "ad-domain\username" - I get accepted into the site without problems. So, my guess is that IE sends wrong username if domain is not specified. Anyway, IE is the only browser that triggers this behavior! Is it possible to do a server-side fix? Maybe it's possible to somehow auto-map the users to AD users? If it's not solvable server-side - is there a client-side fix for this? Thank you. PS: I'm more of a programmer than a sys-admin, so configuring servers isn't the strong side of mine... :P UPDATE: @Evan: Yes, "Digest authentication for Windows domain servers" is also enabled. @Eric: IIS version is 6.0. The authentication methods enabled are: Integrated and digest - all other methods are disabled. As for the security log. I looked at it, when doing "username" and "password" login in Chrome/Firefox and when doing "ad-domain\username" and "password" login from IE - the generated log messages are the same (I see no difference, anyway). When entering "username" and "password" I don't see any errors in the security (or any other) log, so can't tell what method it's trying to use. UPDATE 2: As suggested by Eric in the comments - I played around with Fiddler... While playing with it, I noticed, that when "username" and "password" is entered in FF and IE - the "Authorization" header value (encrypted) sent by IE is longer (almost two times) than one sent by FF. I tried to disable Windows Integrated authentication and only leave the Digest enabled - that fixed the problem (meaning, IE used the right realm just like other browsers), but that caused bazillion other problems with my site, because with Digest - user impersonation on the server doesn't work (that causes problems, when connecting to database etc). Any ideas?

  Read the article

• Windows Server 2008 Migration - Did I miss something?

  - by DevNULL

  I'm running in to a few complications in my migration process. My main role has been a Linux / Sun administrator for 15 yrs so Windows server 2008 environment is a bit new to me, but understandable. Here's our situation and reason for migrating... We have a group of developers that develop VERY low-level software in Visual C with some inline assembler. All the workstations were separate from each other which cased consistency problems with development libraries, versions, etc... Our goal was to throw them all on to a Windows domain were we can control workstation installations, hot fixes (which can cause enormous problems), software versions, etc... All Development Workstations are running Windows XP x32 (sp3) and x64 (sp2) I running in to user permission problems and I was wondering maybe I missed one, tWO or a handful of things during my deployment. Here is what I have currently done: Installed and Activated Windows Server 2008 Added Roles for DNS and Active Directory Configured DNS with WINS for netbios name usage Added developers to AD and mapped their shared folders to their profile Added roles for IIS7 and configured the developers SVN Installed MySQL Enterprise Edition for development usage Not having a firm understanding of Group Policy I haven't delved deeply in to that realm yet. Problems I'm encountering: 1. When I configure any XP workstations to logon our domain, once a user uses their new AD login, everything goes well, except they have very restrictive permissions. (Eg: If a user opens any existing file, they don't have write access, except in their documents folder.) Since these guys are working on low system level events, they need to r/w all files. All I'm looking to restrict in software installations. Am I correct to assume that I can use WSUS to maintain the domains hot fixes and updates pushed to the workstations? I need to map a centralized shared development drive upon the users login. This is open to EVERYONE. Right now I have the users folders mapped upon login through their AD profile. But how do I map a share if I've already defined one within their profile in AD? Any responses would be very grateful. Do I have to configure and define a group policy for the domain users? Can I use Volume Mirroring to mirror / sync two drives on two separate servers or should I just script a rsync or MS Synctool? The drives simply store nightly system images.

  Read the article

• Why does NX Client for Windows silently closes after connection?

  - by pavel

  Hey! I connect remotely to my Ubuntu server from Vista machine. Now I need to run a GUI application on the server (Wireshark). So I decided to use FreeNX server/client to view Ubuntu GUI on Vista I have successfully installed FreeNX on Ubuntu and NX Client on Vista. I was following this guide Unfortunately, now I found myself stuck with the following problem. At the client, the !M logo window appears, but after a few seconds that window just closes, even without showing any error message. Guys, I'm really stuck, please help! Maybe I should have installed some graphical environment on the server? These are the details from NX client, it seems there are no errors. ----------------- Info: Display running with pid '7768' and handler '0x670d24'. NXPROXY - Version 3.4.0 Copyright (C) 2001, 2007 NoMachine. See http://www.nomachine.com/ for more information. Info: Proxy running in client mode with pid '2168'. Session: Starting session at 'Sat Dec 19 10:58:35 2009'. Warning: Connected to remote version 3.3.0 with local version 3.4.0. Info: Connection with remote proxy completed. Info: Using WAN link parameters 768/24/1/0. Info: Using cache parameters 4/4096KB/16384KB/16384KB. Info: Using pack method 'adaptive-9' with session 'kde'. Info: Using ZLIB data compression 1/1/32. Info: Using ZLIB stream compression 1/1. Info: No suitable cache file found. Info: Forwarding X11 connections to display ':0'. Info: Listening to font server connections on port '11000'. Session: Session started at 'Sat Dec 19 10:58:35 2009'. Info: Established X server connection. Info: Using shared memory parameters 0/0K. Session: Terminating session at 'Sat Dec 19 10:58:37 2009'. Session: Session terminated at 'Sat Dec 19 10:58:37 2009'. -----------

  Read the article

• Hidden DNS master only sending notify to one slave

  - by Rob

  My hidden DNS master is only sending notifies to one of the name servers for a zone I have 3 named servers ns0,ns1 & ns2 all running bind 9.7.3.dfsg-1ubuntu4.1. When an update is processed the master (ns0) seems to behave normally. ns0 (192.168.2.50) zone domain.org/IN: sending notifies (serial 2012060703) client 192.168.2.52#42892: transfer of 'domain.org/IN': AXFR-style IXFR started: TSIG rndc-key client 192.168.2.52#42892: transfer of 'domain.org/IN': AXFR-style IXFR ended ns2 (192.168.2.52) client 192.168.2.50#3762: received notify for zone 'domain.org': TSIG 'rndc-key' zone domain.org/IN: Transfer started. transfer of 'domain.org/IN' from 192.168.2.50#53: connected using 192.168.2.52#55747 zone domain.org/IN: transferred serial 2012060704: TSIG 'rndc-key' transfer of 'domain.org/IN' from 192.168.2.50#53: Transfer completed: 1 messages, 34 records, 1028 bytes, 0.001 secs (1028000 bytes/sec) Nothing happens on ns1. I've turned up the logging level but there's no information in syslog about the actual name servers bind has sent notifications to so I guess this is something it doesn't log. I've also tried watching tcpdump, it never makes any attempt to notify ns1 only ns2 192.168.2.50.56278 > 192.168.2.52.53: [udp sum ok] 56418 notify [b2&3=0x2400] [1a] [1au] ? SOA? domain.org. domain.org. [0s] SOA ns1.domain.net. dnsmaster.domain.net. ? 2012060801 10800 3600 604800 3600 ar: rndc-key. ANY [0s] TSIG hmac-md5.sig-alg.reg.int. fudge=300 maclen=16 origid=56418 error=0 otherlen=0 (174) the authoritive zone has both ns1 and ns2 records $ORIGIN domain.org. $TTL 3h @ IN SOA ns1.domain.net. dnsmaster.domain.net. ( 2012060801 ; Serial yyyymmddnn 3h ; Refresh After 3 hours 1h ; Retry Retry after 1 hour 1w ; Expire after 1 week 1h ) ; Minimum negative caching of 1 hour @ 3600 IN NS ns1.domain.net. @ 3600 IN NS ns2.domain.net. // Edit I have added also-notify {192.168.2.51;192.168.2.52;}; explicitly to the zone file and it all works fine, both ns1 and ns2 get notify messages and transfers succeed. I was under the impression bind would automatically send notifies to all NS records on a zone, maybe it's bugged?

  Read the article

• Coldfusion 8 Application Crashes Under Heavy Load

  - by KM01

  Hello, We have a CF8 app that runs for 20-25 minutes before crashing under heavy load ~ 1200 users. This load is generated by our load testing tool: 1200 users ramped up in 5 mins (approx behavior of our users), running for an hour. We have this app on Solaris 10, Apache 2, JRun 4 and Oracle 10g. Java version is 1.6. During the initial load tests, the thread dumps pointed to monitor deadlocks that pointed to sessions. "jrpp-173": waiting to lock monitor 0x019fdc60 (object 0x6b893530, a java.util.Hashtable), which is held by "scheduler-1" "scheduler-1": waiting to lock monitor 0x026c3ce0 (object 0x6abe2f20, a coldfusion.monitor.memory.SessionMemoryMonitor$TopMemoryUsedSessions), which is held by "jrpp-167" "jrpp-167": waiting to lock monitor 0x019fdc60 (object 0x6b893530, a java.util.Hashtable), which is held by "scheduler-1" We increased the number of sessions relative to the number of CPUs (48 simultaneous threads against 32 CPUs), and the deadlock went away. While varying the simultaneous threads helped a little bit in terms of response time, the CF server still tanked in 20-25 minutes during all of these tests. We ran more thread dumps, and saw a thread locking a monitor, for e.g.: "jrpp-475" prio=3 tid=0x02230800 nid=0x2c5 runnable [0x4397d000] java.lang.Thread.State: RUNNABLE at java.util.HashMap.getEntry(HashMap.java:347) at java.util.HashMap.containsKey(HashMap.java:335) at java.util.HashSet.contains(HashSet.java:184) at coldfusion.monitor.memory.MemoryTracker.onAddObject(MemoryTracker.java:124) at coldfusion.monitor.memory.MemoryTrackerProxy.onReplaceValue(MemoryTrackerProxy.java:598) at coldfusion.monitor.memory.MemoryTrackerProxy.onPut(MemoryTrackerProxy.java:510) at coldfusion.util.CaseInsensitiveMap.put(CaseInsensitiveMap.java:250) at coldfusion.util.FastHashtable.put(FastHashtable.java:43) - locked <0x6f7e1a78> (a coldfusion.runtime.Struct) at coldfusion.runtime.CfJspPage._arrayset(CfJspPage.java:1027) at coldfusion.runtime.CfJspPage._arraySetAt(CfJspPage.java:2117) at cfvalidation2ecfc1052964961$funcSETUSERAUDITDATA.runFunction(/app/docs/apply/cfcs/validation.cfc:377) As you see in the last line above there were several references CFMs and CFCs, and the lines have "cflock" tags, which were scoped to the "application." We (the dev team) then changed them to be scoped to a "name". After more load tests, there is no locking going on and there no deadlocks, but now the application tanks in 7-10 minutes. We've gotten system, network and DB reports from the respective admins, and they are not being taxed; even watched the server stats with server monitor, top, prstat, ran sar reports, etc. So we believe it is an issue with the CF server or maybe the JVM. I am running out of ideas as to what else we can try. Disclaimer: I am not a CF developer or Admin. I am just running the load test, analyzing the reports, threads etc, and sharing the results with the dev and admin teams, and trying the next change, and so on. So far no dice. Has anyone run into something similar? How did you go about diagnosing and troubleshooting? All thoughts and pointers welcome. Thank you for your time! KM

  Read the article

• Subversion/Hudson/Sonar/Artifactory - too much for my little server to handle! Help!

  - by Ricket

  I have a little dedicated server. It's at a cheap price and has a simple AMD 1800+ (1.5ghz), 256mb DDR RAM, ...need I continue? And I think I'm overloading it already. I have installed the following, and it's running CentOS 5.4: Webmin Apache MySQL Subversion as an Apache module Hudson (standalone) Sonar (standalone, runs with a standalone Jetty install) Artifactory (standalone) That's pretty much it. But I'm having problems; pages are loading quite slowly. Network speed of the server is excellent, but I think I'm just running out of CPU and/or memory. A side-effect of the pages loading slowly is that sometimes Hudson times out, not being able to start Maven or contact Sonar in a certain amount of time. I think the next step to speed things up might be to move to an application server and use the WAR version of Hudson, Sonar and Artifactory together on that server. I don't know that it will help, but it just seems to make sense, especially with Sonar running on its own Jetty install and the other two probably running their own mini application servers as well. Am I correct in thinking this? Is this the right course of action? Any other tips on how to make the server run faster? I can post more data if you'd like, just let me know what else would help you answer my question. Oh, also just to cure any suspicions, I don't have any sort of virus or spyware. I protect my SSH access with DenyHosts (which has blocked 300+ brute forcers in the past few months), and I have confirmed that the top four processes in terms of memory and CPU usage are Sonar, Artifactory, Hudson, and MySQL. Edit: I just thought of another thing that I'd like you to comment on as well: Apache currently has 8 spawned slave processes, taking 42MB of ram apiece. This is not my web server. Is everything else able to function if I shut down Apache? Can you point me towards a tutorial or something on migrating Subversion from Apache into something that might work along with the other three applications, maybe even make Subversion a WAR file or something?

  Read the article

• Looking for a NTP Server Software for Windows

  - by Simon

  I'm looking for a, preferably free, NTP Server for Windows Server 2003/2008. We have already tried the built in Windows Time Server, but our tests did show that it is not very accurate, we see time differences up to 500ms. The max time difference we can allow for our application is ~100ms. Now we have already used the Meinberg NTPd for Windows. It works great except we have one big issue with it: If there is a network connection problem between the client and server, the ntp server is in a panic state It won't give the client a new time until we restart the ntp service. This is a big issue which has caused us some trouble. It was working fine for months until there was a network problem we didn't notice, we only noticed it after a week when the time difference was already 30 sec. on the clients. So please suggest some alternative NTP Server for windows. I did Google but I get a lot of unrelated search results. Edit: So far the ntpd windows version was very accurate and I'd like to stick with it. The only problem is the "panic state" after a network disconnect. Maybe some knows here what the cause of this is and how to fix it. Also, I forgot to mention that we have a server/client setup like this: Server1 -- Server2 -- Server3 -- Client1 -- Client2 -- Client3 So Server2 gets its time from Server1, Server3 gets its time from Server2, and the Clients get their time from Server3. Also, there are clients connected directly to Server2. It is important that all Servers and Clients have the exact same time (within ~100ms) Now there was a network problem with Server3 and its clients. The servers run the ntpd port for Windows, which acts as NTP server and client. The clients have Dimension4 as NTP client. After the network problem, the error message in D4 was something like this (out the top of my head, don't have the exact error message): Server response: The server is in a panic state (could not sync clock) I read through the ntpd docs, and the only mention of "panic" is when the time difference is 10000 seconds which will cause to exit the ntpd server but this was not the case. Also there is a "-g" command line switch to disable the panic exit, but it is already set by default. Any ideas what could cause the panic state and how to get rid of it next time?

  Read the article

• Looking for Fiddler2 help. connection to gateway refused...just got rid of a virus?

  - by john mackey

  I use Fiddler2 for facebook game items, and it's been a great success. I accessed a website to download some dat files I needed. I think it was eshare, ziddu or megaupload, one of those. Anyway, even before the rar file had downloaded, I got this weird green shield in the bottom right hand corner of my computer. It said a Trojan was trying to access my computer, or something to that extent. It prompted me to click the shield to begin anti-virus scanning. It turns out this rogue program is called Antivirus System Pro and is pretty hard to get rid of. After discovering the rogue program, I tried using Fiddler and got the following error: [Fiddler] Connection to Gateway failed. Exception Text: No connection could be made because the target machine actively refused it 127.0.0.1:5555 I ended up purchasing SpyDoctor + Antivirus, which I'm told is designed specifically for getting rid of these types of programs. Anyway, I did a quick-scan last night with spydoctor and malware bytes. Malware picked up 2 files, and Spydoctor found 4. Most were insignificant, but it did find a worm called Worm.Alcra.F, which was labeled high-priority. I don’t know if that’s the Anti-Virus Pro or not, but SpyDoctor said it got rid of all of those successfully. I tried to run Fiddler again before leaving home, but was still getting the "gateway failed" error. Im using the newest version of firefox. When I initially set up the Fiddler 2.2.8.6, I couldn’t get it to run at first, so I found this faq on the internet that said I needed to go through ToolsOptionsSettings and set up an HTTP Proxy to 127.0.0.1 and my Port to 8888. Once I set that up and downloaded this fiddler helper as a firefox add-on, it worked fine. When I turn on fiddler, it automatically takes my proxy setting from no proxy (default) to the 127.0.0.1 with Port 8888 set up. It worked fine until my computer detected this virus. Anyway, hopefully I've given you sufficient information to offer me your best advice here. Like I said, Spydoctor says the bad stuff is gone, so maybe the rogue program made some type of change in my fiddler that I could just reset or uncheck or something like that? Or will I need to completely remove fiddler and those dat files and rar files I downloaded? Any help would be greatly appreciated. Thanks for your time.

  Read the article

• AWS EC2 - How to specify an IAM role for an instance being launched via awscli

  - by Skaperen

  I am using the "aws ec2 run-instances" command (from the awscli package) to launch an instance in AWS EC2. I want to set an IAM role on the instance I am launching. The IAM role is configured and I can use it successfully when launching an instance from the AWS web UI. But when I try to do this using that command, and the "--iam-instance-profile" option, it failed. Doing "aws ec2 run-instances help" shows Arn= and Name= subfields for the value. When I try to look up the Arn using "aws iam list-instance-profiles" it gives this error message: A client error (AccessDenied) occurred: User: arn:aws:sts::xxxxxxxxxxxx:assumed-role/shell/i-15c2766d is not authorized to perform: iam:ListInstanceProfiles on resource: arn:aws:iam::xxxxxxxxxxxx:instance-profile/ (where xxxxxxxxxxxx is my AWS 12-digit account number) I looked up the Arn string via the web UI and used that via "--iam-instance-profile Arn=arn:aws:iam::xxxxxxxxxxxx:instance-profile/shell" on the run-instances command, and that failed with: A client error (UnauthorizedOperation) occurred: You are not authorized to perform this operation. If I leave off the "--iam-instance-profile" option entirely, the instance will launch but it will not have the IAM role setting I need. So the permission seems to have something to do with using "--iam-instance-profile" or accessing IAM data. I repeated several times in case of AWS glitches (they happen sometimes) and no success. I suspected that perhaps there is a restriction that an instance with an IAM role is not allowed to launch an instance with a more powerful IAM role. But in this case, the instance I am doing the command in has the same IAM role that I am trying to use. named "shell" (though I also tried using another one, no luck). Is setting an IAM role not even permitted from an instance (via its IAM role credentials)? Is there some higher IAM role permission needed to use IAM roles, than is needed for just launching a plain instance? Is "--iam-instance-profile" the appropriate way to specify an IAM role? Do I need to use a subset of the Arn string, or format it in some other way? Is it possible to set up an IAM role that can do any IAM role accesses (maybe a "Super Root IAM" ... making up this name)? FYI, everything involves Linux running on the instances. Also, I am running all this from an instance because I could not get these tools installed on my desktop. That and I do not want to put my IAM user credentials on any AWS storage as advised by AWS here. after answered: I did not mention the launching instance permission of "PowerUserAccess" (vs. "AdministratorAccess") because I did not realize additional access was needed at the time the question was asked. I assumed that the IAM role was "information" attached to the launch. But it really is more than that. It is a granting of permission.

  Read the article

• Problem deploying GWT application on apache and tomcat using mod_jk

  - by Colin

  I'm trying to deploy a GWT app on Apache using mod_jk connector. I have compiled the application and tested it on tomcat on the address localhost:8080/loginapp and it works ok. However when I deploy it to apache using mod_jk I get the starter page which gives me a login form but trying to login I get this error 404 Not Found Not Found The requested URL /loginapp/loginapp/login was not found on this server Looking at the apache log files i see this [Thu Jan 13 13:43:17 2011] [error] [client 127.0.0.1] client denied by server configuration: /usr/local/tomcat/webapps/loginapp/WEB-INF/ [Thu Jan 13 13:43:26 2011] [error] [client 127.0.0.1] File does not exist: /usr/local/tomcat/webapps/loginapp/loginapp/login, referer: http://localhost/loginapp/LoginApp.html The mod_jk configurations on my apache2.conf file are as follows LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories JkRequestLogFormat "%w %V %T" <IfModule mod_jk.c> Alias /loginapp "/usr/local/tomcat/webapps/loginapp/" <Directory "/usr/local/tomcat/webapps/loginapp/"> Options Indexes +FollowSymLinks AllowOverride None Allow from all </Directory> <Location /*/WEB-INF/*> AllowOverride None deny from all </Location> JkMount /loginapp/*.html loginapp My workers.properties file is as follows workers.tomcat_home=/usr/local/tomcat workers.java_home=/usr/lib/jvm/java-6-sun ps=/ worker.list=loginapp worker.loginapp.type=ajp13 worker.loginapp.host=localhost worker.loginapp.port=8009 worker.loginapp.cachesize=10 worker.loginapp.cache_timeout=600 worker.loginapp.socket_keepalive=1 worker.loginapp.recycle_timeout=300 worker.loginapp.lbfactor=1 And this is my servlet mappings for my app on the application's web.xml <servlet> <servlet-name>loginServlet</servlet-name> <servlet-class>com.example.loginapp.server.LoginServiceImpl</servlet-class> </servlet> <servlet-mapping> <servlet-name>loginServlet</servlet-name> <url-pattern>/loginapp/login</url-pattern> </servlet-mapping> <servlet> <servlet-name>myAppServlet</servlet-name> <servlet-class>com.example.loginapp.server.MyAppServiceImpl</servlet-class> </servlet> <servlet-mapping> <servlet-name>myAppServlet</servlet-name> <url-pattern>/loginapp/mapdata</url-pattern> </servlet-mapping> Ive tried everything and it seems to still elude me. Even tried changing the deny from all directive on the WEBINF folder to allow from all and still it doesnt work. Maybe im missing something. Any help will be highly appreciated.

  Read the article

• filtering itunes library items by file location

  - by Cawas

  3 answers and unfortunately no solution yet. The Problem I've got way more than 1000 duplicated items in my iTunes Library pointing to a non-existant place (the "where" under "get info" window), along with other duplicated items and other MIAs (Missing In Action). Is there any simple way to just delete all of them and only them? From the library, of course. By that I mean some MIAs are pointing to /Volumes while some are pointing to .../music/Music/... or just .../music/.... I want to delete all pointing to /Volumes as to later I'll recover the rest. Check the image below. Some Background I tried searching for a specific key word on the path and creating smart play list, but with no result. Being able to just sort all library by path would be a perfect solution! I believe old iTunes could do that. PowerTunes can do it (sort by path) but I can't do anything with its list. I would also welcome any program able to handle this, then import and properly export back the iTunes library. Since this seems to just not be clear enough... AppleScript doesn't work That's because AppleScript just can't gather the missing info anywhere in iTunes Library. Maybe we could use AppleScript by opening the XML file, but that's a whole nother issue. Here's a quote from my conversation with Doug the man himself Adams last december: I don't think you do understand. There is no way to get the path to the file of a dead track because iTunes has "forgotten" it. That is, by definition, what a dead track is. Doug On Dec 21, 2010, at 7:08 AM, Caue Rego wrote: yes I understand that and have seem the script. but I'm not looking for the file. just the old broken path reference to it. Sent from my iPhone On 21/12/2010, at 10:00, Doug Adams wrote: You cannot locate missing files of dead tracks because, by definition, a dead track is one that doesn't have any file information. If you look at "Super Remove Dead Tracks", you will notice it looks for tracks that have "missing value" for the location property.

  Read the article

• windows 2008 R2 TS printer security - can't take owership

  - by Ian

  I have a Windows 2008 R2 server with Terminal server role installed. I'm seeing a problem with an ordinary user who is member of local printer operators group on the server. If the user opens a cmd window using ‘run as administrator’ they can run printmanager.msc without needing to enter their password again. In printmanager they can change the ownership of redirected (easy print) printers without problems. If, from the same cmd window, they use subinacl to try and change the onwership of the queue to themselves they get access denied: >subinacl.exe /printer "_#MyPrinter (2 redirected)" /setowner="MyDom\MyUsr" Elapsed Time: 00 00:00:00 Done: 1, Modified 0, Failed 1, Syntax errors 0 Last Done : _#MyPrinter (2 redirected) Last Failed: _#MyPrinter (2 redirected) - OpenPrinter Error : 5 Access denied so, same context, same action but one works and one doesn't. Any ideas for this odd behaviour? I'm using subinacl x86 on an x64 server as I can't find anything more up to date. I've tried with icacls and others but couldn't get them to do anything with printers. EDIT: added after Gregs comments regarding setacl below If I log into the TS server as Testusr and open Admin Tools Printer Admin (as administrator) and then type mydomain\testusr and the testusr's password, then I can change the ownership of the printer queue and set testusr as the owner. However if I open cmd as administrator and, again, type mydomain\testusr and the users password when I try to change the ownership of my redirected printer I get the following: C:\>setacl -on "Bullzip PDF Printer (12 redireccionado)" -ot prn -actn setowner -ownr n:mydom\testusr WARNING: Privilege 'Back up files and directories' could not be enabled. SetACL's powers are restricted. WARNING: Privilege 'Restore files and directories' could not be enabled. SetACL's powers are restricted. INFORMATION: Processing ACL of: <Bullzip PDF Printer (12 redireccionado)> ERROR: Enabling the privilege SeTakeOwnershipPrivilege failed with: No todos los privilegios o grupos a los que se hace referencia son asignados al llamador. [meaning not all referenced privs or groups are assigned to the caller] SetACL finished with error(s): SetACL error message: A privilege could not be enabled maybe I'm getting something wrong but if the built in windows tool can do it with just membership of the 'print operators' group then setacl should be able to as well, no? However setacl seems to depend on other privileges, which in reality are not required to do this.

  Read the article

• SSH Socks Proxy wiith iptables REDIRECT

  - by Radium

  I have googled and haven`t found the answer on my question. Help me please. There are two servers: serverA with public IP 12.0.0.10 and an private IP 10.0.0.5 serverB with public IP 20.0.0.11 I have setup SOCKS proxy on serverB to serverA: ssh -D20.0.0.11:2222 [email protected] So when on my local machine in a browser i specify SOCKS proxy 20.0.0.11:2222 (serverB:2222) as external IP while browsing i get 12.0.0.10 (serverA IP). That is ok. As well if i go onto http://10.0.0.5 (serverA private IP) it is also reachable. That is what i need. I want to make servers A private IP to be available through servers B public IP on certain ports but without specifying SOCKS in my browser. I could use ssh port forward but the problem is - i need to forward many ports and do not know which exactly - i know only the range. So when i connect to 20.0.0.11 to any port , for example, from 3000:4000 range, i want that traffic to be redirected to 10.0.0.5 on the same port. That is why i`ve decided maybe SOCKS proxy via SSH and iptables REDIRECT could help me. Client - serverBPublicIP (any port from range 3000:4000) - serverAPublicIP - serverAPrivateIP (the port was requested on serverBPublicIP) On serverB i do: ssh -D20.0.0.11:2222 [email protected] iptables -t nat -A PREROUTING -d 20.0.0.11 -p tcp --dport 3000:4000 -j REDIRECT --to-port 2222 But that does not work - when i telnet on 20.0.0.11:3001 for example i do not see any proxied traffic on the serverA. What should i do else? I have tried tcpsocks like this (in example i am telneting to 20.0.0.11:3001) Client -> 20.0.0.11:3001 -> iptables REDIRECT from 3001 --to-port 1111 -> tcpsocks from 1111 to 2222 -> SOCKS proxy from serverB to serverA on port 2222 -> serverA But i do not know what to do with the traffic on serverA. How to route it to its private IP. Help me please. I know, VPN removes all the hell i am trying to create, but i have no ability to use tun/tap device. It is disabled.

  Read the article

• Is it possible to "stealth" dual boot a machine?

  - by BrianH

  I have a loaner laptop that has MS Windows with locked down permissions. It works okay for what I need to do, but I started wondering if there was a way to install a separate Windows OS on a separate hard drive to do what I want to do on it. Virtual I wish I could use VirtualBox or VMWare, but that is not an option (I even tried VBox portable). External Drive My next trial was see if it was possible to install Windows on an external drive, and then plug that drive in and boot from it whenever I wanted my own OS. After a few Google searches, I see that is not really a possibility. Swap Primary Drive Another option, would be to get a second internal hard drive, take the existing HD out, and install a new Windows OS on the secondary HD. This would mean swapping the internal hard drive each time I want to switch OSs - doable, but not very convenient. Dual Boot The laptop has an expansion slot where a second hard drive can be plugged in quickly. I thought about Dual booting, but I don't want to mess with the MBR on the primary hard drive. When I have to give the laptop back, I don't want a dual-boot screen to popup. Summary Is there a way to have 2 hard-drives on a machine, each with it's own OS, and maybe use BIOS settings to have only 1 hard drive active at a time? That way both hard drives could be physically connected, but only one would actually be active at a time. I basically want a second OS that does not (can not) affect the existing OS in any way, and can be removed at any time without affecting the existing OS. The secondary OS does not need any of the files on the main hard drive - it's basically like having 2 separate computers using the same hard ware... Is this possible, or would it be easier just to go out and buy a different laptop? Thanks in advance! EDIT I just discovered that my BIOS allows me to pick (at startup) which hard drive I want to boot from. I poked around in the BIOS and there is not a place to disable certain devices, like the primary hard drive. My only concern about plugging in a second hard drive and installing Windows to the second hard drive is that it will mess with the primary hard drive, or add a bootloader screen to pick which windows install to use. My thought would be to physically unplug the primary, plug in the secondary and install windows to the secondary. After the install is working properly, I can plug the primary back in and use the BIOS feature to determine which drive to boot to. Is there any way after I have 2 separate installs on 2 separate hard drives that one of the installs could mess with the MBR on the other drive?

  Read the article

• Ubuntu 12.04 crash analysis - strange binary data on all open files at the moment of crash

  - by lanbo

  A couple of hours ago we got a system crash on Ubuntu 12.04. We checked all the log files and there is nothing suspicious to blame to. Last stuff that was logged was some dovecot activity. There are no kernel panic messages. Nothing. It is a new server (new hardware) we are testing before production. And because it is new hard, I'm suspicious the problem may be due to some faulty hardware. We already run memtester with no problem detected. I'll be happy to hear from other hardware testing tools (the machine has SSD). Anyway, the thing I wanted to ask you is a different one. The strange thing is on every open file at the moment of the crash we found the next sequence of symbols was written into them: "@^@^@^@^@^@^@...". For example, on the syslog log file we got: Apr 16 15:53:56 odyssey dovecot: pop3-login: Aborted login (auth failed, 1 attempts): user=<info>, method=PLAIN, rip=46.29.255.73, lip=5.9.58.177 ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^ [these continues for about 1000 chars...] ^@^@^@^@Apr 16 15:55:12 odyssey kernel: imklog 5.8.6, log source = /proc/kmsg started. We got all these symbols in all open files. These include: syslog, mail.log, kern.log, ... But also on some logs that are output by php scripts run in CRONs from user accounts (not root). So, any idea why all open files got these characters written during the crash? This is pretty bad since the crash corrupted many files (we don't even know which other ones may be affected). We are suspicious that all open files (in write mode maybe) at the moment of the crash got all these symbols inserted. Why is that? BTW [in case it helps], the system automatically rebooted after the crash but Apache did not start. There were not traces in /var/apache2/*log why apache did not start. After running a "service apache2 start" it started with no problems. Also, we rebooted the machine manually and Apache also started on reboot. But it did not start after the crash and no errors were reported. Thanks guys!

  Read the article

• Multicast hostname lookups on OSX

  - by KARASZI István

  I have a problem with hostname lookups on my OSX computer. According to Apple's HK3473 document it says for v10.6: Host names that contain only one label in addition to local, for example "My-Computer.local", are resolved using Multicast DNS (Bonjour) by default. Host names that contain two or more labels in addition to local, for example "server.domain.local", are resolved using a DNS server by default. Which is not true as my testing. If I try to open a connection on my local computer to a remote port: telnet example.domain.local 22 then it will lookup the IP address with multicast DNS next to the A and AAAA lookups. This causes a two seconds lookup timeout on every lookup. Which is a lot! When I try with IPv4 only then it won't use the multicast queries to fetch the remote address just the simple A queries. telnet -4 example.domain.local 22 When I try with IPv6 only: telnet -6 example.domain.local 22 then it will lookup with multicast DNS and AAAA again, and the 2 seconds timeout delay occurs again. I've tried to create a resolver entry to my /etc/resolver/domain.local, and /etc/resolver/local.1, but none of them was working. Is there any way to disable this multicast lookups for the "two or more label addition to local" domains, or simply disable it for the selected subdomain (domain.local)? Thank you! Update #1 Thanks @mralexgray for the scutil --dns command, now I can see my domain in the list, but it's late in the order: DNS configuration resolver #1 domain : adverticum.lan nameserver[0] : 192.168.1.1 order : 200000 resolver #2 domain : local options : mdns timeout : 2 order : 300000 resolver #3 domain : 254.169.in-addr.arpa options : mdns timeout : 2 order : 300200 resolver #4 domain : 8.e.f.ip6.arpa options : mdns timeout : 2 order : 300400 resolver #5 domain : 9.e.f.ip6.arpa options : mdns timeout : 2 order : 300600 resolver #6 domain : a.e.f.ip6.arpa options : mdns timeout : 2 order : 300800 resolver #7 domain : b.e.f.ip6.arpa options : mdns timeout : 2 order : 301000 resolver #8 domain : domain.local nameserver[0] : 192.168.1.1 order : 200001 Maybe it would work if I could move the resolver #8 to the position #2. Update #2 No probably won't work because the local DNS server on 192.168.1.1 answering for domain.local requests and it's before the mDNS (resolver #2). Update #3 I could decrease the mDNS timeout in /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist file, which speeds up the lookups a little, but this is not the solution.

  Read the article

• Old CRT screen's high resolution doesn't work anymore on windows 7

  - by Mixxiphoid

  One year ago I decided to switch from Windows XP to Windows 7. I had a 17" CRT monitor with a screen resolution of 1600x1200 which worked fine on Windows XP. While installing Windows 7 everything went well until Windows 7 was going to install the video card its driver. Windows 7 puts the screen to its recommended resolution and my screen became black. I waited a few minutes to be sure the installation was finished. I turned off the computer by hand and restarted the computer on a resolution of 800x640. When windows 7 was done installing I went to screen resolutions and the resolution of 1600x1200 was on the top of the list with '(recommended)' next to it. I tried putting it on 1600x1200 but again my screen went black. I installed all windows 7 updates including the video card driver from the NVidia site (NOT from Windows 7). I tried about everything to make it work on 1600x1200 but with no succes. The highest resolution I got with the crt monitor was 1280x1024. I had a TFT screen which had 1280x1024 as max resolution and had better colors, so I used that one till today. My video card is 9600GT and my power supply is beyond sufficient. I even tried to install the driver I had on XP to see if it worked, but no results. I tried classic mode on windows 7, changed the dpi, the frequentie and the monitor settings, but nothing worked. I really like a vertical resolution of 1200, but it seems today I'm bound to all those standard monitors with a resolution of 1980x1024... Can anybody explain to me what the cause is that it worked on Windows XP but not on Windows 7? And maybe a solution to the problem (I actually gave up on getting it fixed...) Thanks a lot in advance. SOLUTION I downloaded the according monitor driver and installed it. Next I rebooted my computer on low resolution (800x640) and connected the CRT monitor. When Windows 7 booted successfully I went to computer management and 'update the driver' of my monitor. I manually selected 'Generic PnP monitor' and made that one active. I want to advanced settings at 'Screen resolution' and selected the mode '1600x1200 (32-bit) 80 Hertz (95 Hertz did not work). Now I had my resolution on 1600x1200. I repeated the earlier step to select the original monitor again instead of the Generic monitor. Quite a way to solve this problem, but it worked! Thanks a lot you all.

  Read the article

• Looking for app to work fluidly with CSV data in graph form

  - by Aszurom

  It often occurs to me that if I had a good tool for viewing CSV data in graphical format, and comparing two sets of numbers to each other, I could do a great deal of meaningful trend watching and data interpretation. For example, perfmon can output quite a lot of data about a server into a CSV file, but there's no good way to view it. A lot of scripts could/have been written that would populate CSV files. I could write these all day long. My problem is that I need a great viewer. I've seen quite a few things that will take a CSV file and after a lot of tweaking and user adjustment produce a static gif/png image. A static image doesn't do me a lot of good, because I have to look at it, then re-calibrate the parameters of the program, regenerate the image, repeat. That sucks. I could do this in Excel. Ideally, I would want a FLUID graph viewer. On the fly, I can adjust how much of my timeline I'm viewing. I could adjust the scaling so that one big spike doesn't make 99.9% of the data an unreadable line across the bottom of the X axis. Stuff like that. I should be able to say "show me CSV column 3 and column 5 as graphs. Show me the data scaled for 20 or 150 entries, and let me slide that window up and down the column of data. Auto scale to fit 95% of data within the Y axis and let crazy spikes go off the screen." Maybe I'm terribly spoiled by how you can drag, zoom, and slide data around on my iPad. I want to be able to view a spreadsheet of data with that fluidity and not have to guess at what sort of static snapshot I want to create from it. I don't want to have to make a study of how to tweak some data plotting program to let me import my file and do what I could just do in Excel. I want to scale, zoom, and transform my graph on the fly and then export a snapshot of it once I have it the way I want it. Is there anything out there that fills this need? I'll take linux, osx, win32 or even iOS suggestions.

  Read the article

• Operative systems on SD cards

  - by HisDudeness

  I was getting some wild ideas the last days, like putting some operative systems into SD cards rather than on my hard drive. I'll go further into details now and explain what lead me to consider this probably abominable decision. I am on a laptop (that means I have a native SD-card reader) which is currently running a cross-distro setup, with a bunch of Linux systems (placed in dedicated ext4 logical partitions into a huge extended one) regulated by an unique GRUB. Since today, my laptop haven't even seen any Windows system with binoculars. I was thinking about placing all the os part of my setup into a Secure Digital to save all my 500 Gb Hard Drive for documents, music, videos and so on, and being able to just remove the SD and boot my system into another computer too, as well as having the possibility of booting other systems into mine by just plugging in another SD, without having to keep it constantly placed in my PC. Also, in the remote case in the near future I just wanted to boot Windows 8 in it, I read it causes major boot incompatibility issues with other systems by needing a digital signature in order for them to start. By having it in a removable drive, I could just get rid of it when I'm needing him and switch its card with Linux one, and so not having any obstacles to their boot. Now, my questions are: I know unlikely traditional rotating disk drives, integrated circuits ones have a limited lifespan in terms of cluster rewriting. Is it an obstacle to that kind of usage? I mean, some Ultrabooks are using SSD now, is it the same issue, or there are some differences between Solid State Drives and Secure Digitals in that sense? Maybe having them to store system files which are in fixed positions (making the even-usage of cluster technology useless) constantly being re-read and updated and similar things just gets them soon unserviceable, do it? Second question: are all motherboards and BIOSes able to boot from SDs just like they are from USB pen drives (I mean, provided card reader is USB-connected, isn't it)? Or can't bootloaders like GRUB be installed on SDs working? If they can't, is it a solution installing GRUB to MBR and making boot option pointing to SD? Will it work? Are there any other problems to installing OSs on a Secure Digital?

  Read the article

< Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >