Search Results

Search found 64639 results on 2586 pages for 'work stealing'.

Page 448/2586 | < Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >

• AR242x / AR542x wireless card not working

  - by Pipan87

  My wifi worked perfect until I updated to the latest version of Ubuntu. Now I don't find any wireless connections at all. I have tried lots of guides on the internet but I can't get it to work. I did however start to work once after writing something I don't remember in Terminal, but after rebooting it stopped working again. Some info (don't know if you need more to help): 01:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: Acer Incorporated [ALI] Device 022c Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 55200000 (64-bit, non-prefetchable) [size=256K] I/O ports at 3000 [size=128] Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [58] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [180] Device Serial Number ff-93-2e-de-00-23-8b-ff Kernel driver in use: ATL1E Kernel modules: atl1e 02:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Foxconn International, Inc. Device e00d Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at 54100000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath5k Kernel modules: ath5k

  Read the article

• I've got my Master's in Software Engineering... Now what? [closed]

  - by Brian Driscoll

  Recently I completed a Master of Science in Software Engineering from Drexel University (Philadelphia, PA, US), because I wanted to have some formal education in software (my undergrad is in Math Ed) and also because I wanted to be able to advance my career beyond just programming. Don't get me wrong; I love to code. I spend a lot of my spare time coding. However, for me writing code is just a means to an end: what I REALLY love is designing software. Not visual design, mind you, but the architecture of the system. So, ideally I'd like to try to get a job doing software architecture. The problem is that I have no real experience in it besides my graduate course work. So, what should I do to make my "bones" in software architecture? UPDATE Just so it's clear, I have over 5 years of work experience in software development and an MCTS cert in addition to my education, so I'm not looking for the usual "I'm fresh out of school, what should I do?" advice.

  Read the article

• How to Avoid a Busy Loop Inside a Function That Returns the Object That's Being Waited For

  - by Carl Smith

  I have a function which has the same interface as Python's input builtin, but it works in a client-server environment. When it's called, the function, which runs in the server, sends a message to the client, asking it to get some input from the user. The user enters some stuff, or dismisses the prompt, and the result is passed back to the server, which passes it to the function. The function then returns the result. The function must work like Python's input [that's the spec], so it must block until it has the result. This is all working, but it uses a busy loop, which, in practice, could easily be spinning for many minutes. Currently, the function tells the client to get the input, passing an id. The client returns the result with the id. The server puts the result in a dictionary, with the id as the key. The function basically waits for that key to exist. def input(): '''simplified example''' key = unique_key() tell_client_to_get_input(key) while key not in dictionary: pass return dictionary.pop(pin) Using a callback would be the normal way to go, but the input function must block until the result is available, so I can't see how that could work. The spec can't change, as Python will be using the new input function for stuff like help and pdb, which provide their own little REPLs. I have a lot of flexibility in terms of how everything works overall, but just can't budge on the function acting exactly like Python's. Is there any way to return the result as soon as it's available, without the busy loop?

  Read the article

• How to avoid "DO YOU HAZ TEH CODEZ" situations?

  - by volothamp

  I have a strange situation at work, where a colleague of mine often asks me and other co-workers for working code. I would like to help him, but this constant request of trivial snippets interrupts my thoughts and sometimes makes it hard to concentrate. Plus, I have the impression (...) that this requests are generated by lack of competence, more than by laziness. In fact, he often asks things pretending to know the answer, since when I solve the problem he usually says things like "Sure", "Yes, that's what I thought", giving me the impression that my answer isn't worth it. How can I solve this embarrassing situation? Should I show more explicitly in front of other colleagues his lack of knowledge (by saying things like: "do it yourself if you can, please") or continue giving him what he wants? I think that he should aggregate all his answers in one, so that I can give him a portion of my time and he can work all by himself on his things. There is no hierarchy in the team, I must say we both have a similar seniority of five years, more or less. For the same reason I believe I cannot report to management, since trivial questions are often ignored. I discussed with other two members and they agree with me: in fact he often ask things cycling through colleagues.

  Read the article

• Another hibernation question

  - by GeekOfTheWeek

  I installed Ubuntu on my Windows 7 Sager laptop using Wubi. Hibernate (i.e. suspend to disc) is not an option from the power icon, only suspend, shutdown, etc. Hibernate is also not an option from my battery/lid close options. I understand that hibernation is disabled by default in Ubuntu 12.04. I tried running pm-hibernate but I get the following message: Looking for splash system... none s2disk: Snapshotting system and then the computer just hangs with a black screen. According to the documentation here if this fails then I can't enable hibernate but it offers no help in making pm-hibernate succeed. Could swap be my problem? It looks like I have very small swap: user@ubuntu:~$ cat /proc/swaps Filename Type Size Used Priority /host/ubuntu/disks/swap.disk file 262140 0 -1 The advice on SwapFaq is only for the author's set up (e.g. I don't have an Ubuntu install disk since I used Wubi) and he says that 'INFO: This will not work for 12.04, resume from hibernate work differently in 12.04.' Any advice? I really need to get hibernate working to use my laptop as a, er, laptop. Thanks

  Read the article

• how to calculate intersection time and place of multiple moving arcs

  - by user20733

  I have rocks orbiting moons, moons orbiting planets, planets orbiting suns, and suns orbiting black holes, and the current system could have many many layers of orbitage. the position of any object is a function of time and relative to the object it orbits. (so far so good). now I want to know for a given 2 objects(A,B), a start time and a speed, how can I work out the when and where to go. I can work out where A and B is given a time. so i just need. 1: direction to travel in from A to B(remember B is moving(not in a straight line)) 2: Time to get to b in a straight line. travel must be in a straight line with the shortest possible distance. as an extension to this question, how will i know if its better to wait, EG is it faster to stay on object A and wait for a hour when the objects may be closer, than to set off from A to B at the start. Cheers, it hurt my brain.

  Read the article

• Looking for job advice [closed]

  - by EntryLevelJavaDeveloper

  I am a software developer for a government agency in DC, and I have recently completed one year of employment. I am generally dissatisfied with my experiences here. I do not want to gripe too much, but I do not spend a lot of time doing actual development on projects. I am asked to do everything under the sun: write requirements, review specs, test, attend random meetings, but actual coding makes up a small fraction of my time. The coding itself is fairly straightforward and simple so it feels like I am not growing from my experiences. I am not tasked with more challenging work, and I find the experiences are not rewarding. If I had a stronger resume/more work experience, I'd leave the position immediately but combined with the present economy, I am hesitant to leave. I have several questions: Does anybody have experiences like this? How did you make the most of it? I am currently doing some side projects, making simple webpages for people, but aside from that, and open source projects, what other things are out there? What are general benchmarks for a developer after one year of professional experience? What should I be expected to know/do? I am outsider (coming from a math/science background) so I do not know what exactly I should know/do. Is it possible to obtain a mentorship with a mid/senior developer to learn? If so, how can I go about making contacts in the DC area?

  Read the article

• Multi Threading - How to split the tasks

  - by Motig

  if I have a game engine with the basic 'game engine' components, what is the best way to 'split' the tasks with a multi-threaded approach? Assuming I have the standard components of: Rendering Physics Scripts Networking And a quad-core, I see two ways of multi-threading: Option A ('Vertical'): Using this approach I can allow one core for each component of the engine; e.g. one core for the Rendering task, one for the Physics, etc. Advantages: I do not need to worry about thread-safety within each component I can take advantage of special optimizations provided for single-threaded access (e.g. DirectX offers a flag that can be set to tell it that you will only use single-threading) Option B ('Horizontal'): Using this approach, each task may be split up into 1 <= n <= numCores threads, and executed simultaneously, one after the other. Advantages: Allows for work-sharing, i.e. each thread can take over work still remaining as the others are still processing I can take advantage of libraries that are designed for multi-threading (i.e. ... DirectX) I think, in retrospect, I would pick Option B, but I wanted to hear you guys' thoughts on the matter.

  Read the article

• Emacs stops taking input when a file has changed on disk [migrated]

  - by recf

  I'm using Emacs v24.3.1 on Windows 8. I had a file change on disk while I had an Emacs buffer open with that file. As soon as I attempt to make a change to the buffer, a message appears in the minibuffer. Fileblah.txt changed on disk; really edit the buffer? (y, n, r or C-h) I would expect to be able to hit r to have it reload the disk version of the file, but nothing happens. Emacs completely stops responding to input. None of the listed keys work, nor do any other keys as far as I can tell. I can't C-g out of the minibuffer. Alt-F4 doesn't work, not does Close window from the task bar. I have to kill the process from task manager. Anyone have any idea what I'm doing wrong here? In cases it's various modes not playing nice with each other, for reference, my init.el is here. Nothing complex. Here's the breakdown: better-defaults (ido-mode, remove menu-bar, uniquify buffer `forward, saveplace) recentf-mode custom frame title visual-line-mode require final newline and delete trailing whitespace on save Markdown mode with auto-mode-alist Flyspell with Aspell backend Powershell mode with auto-mode-alist Ruby auto-mode-alist Puppet mode with auto-mode-alist Feature (Gherkin) mode with auto-mode-alist The specific file was a markdown file with Github-flavored Markdown mode and Flyspell mode enabled.

  Read the article

• Do the benefits of Resin/Quercus outweigh the overhead?

  - by Craige

  Lately, I've been looking more and more into Resin + Quercus as a technology to develop an application of mine. The reason I started looking into it was that this application has high reporting needs, a lot of which cannot (or realistically, should not) be created in real-time. Java would offer a nice backend to queue and generate reports. Also, with Quercus I would be able to develop my data models in Hibernate, and use them "from PHP", thus effectively stretching these models across front and back-end. This same concept would also apply to any front/back-end common business logic, which could be developed in Java libraries. Now, the downside is that whichever front-end (PHP) MVC Framework I choose (my goal was Symfony 2), it is unlikely to work without some heavy modification, if it can work at all. Quercus is a pretty close implementation of PHP, and is supposed to be compatible with PHP5.3, so namespaces and closures SHOULDN'T be a problem, but when I tried to run an existing Symfony 1.4 app, I failed miserably. So, my question to you is, do you think the benefits of Resin + Quercus outweigh the overhead of using a not-so-perfect/stable implementation of PHP? If this were your application, and your goal was and end-product, rather than educational purposes, what would you decide?

  Read the article

• Wine causes twin view to break

  - by deanvz

  I have endlessly been playing around with the Nvidia X Server settings and changing my xorg.conf file to try and work for me and on most days its fine. In each instance I get it working for a while and then this morning the most bizarre thing happens. The moment I open any type of Wine program (which never use to be a problem) my Twin View setup disappears and am left with mirrored displays. I try and change the settings in the Nvidia driver, but its not interested and the screens remain mirrored. I have a work around. Restart my pc... Below are the contents of my current xorg.conf file. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:43:34 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LG Electronics W1934" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9400 GT" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1440+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Having extreme issues getting Compiz working on Ubuntu 11.10 (32-bit)

  - by Josh Hornell

  I have been working very hard the past few days to try to get Compiz configured and working correctly but I have been running into a lot of issues. I first installed the CompizConfig Settings Manager and tried different features such as the desktop cube and couldn't get any of them to work. Then I read that I may not have the right graphics card drivers installed (Nvidia GT540m). So I went into the Additional Drivers tool and it shows that 'no proprietary drivers are in use on this system', which struck me as a bit odd as when I very first installed Ubuntu it showed that my Nvidia drivers were installed an active until I downloaded and installed the updates to Ubuntu and since then it's shown empty. I then tried to install my graphics card drivers manually via this article How do I install the latest Nvidia drivers via the Additional Drivers tool?. I rebooted and had no issue although I tried to go back into the CompizConfig Settings Manager and couldn't get anything to work as well as my Additional Drivers tool still showed no drivers installed. I feel like I've tried about everything I can think of and any help would be much appreciated!

  Read the article

• Career change: from programming into more human-oriented area [closed]

  - by Art

  I have been a software developer for approximately 9 years, starting with part-time work during my graduation year at uni. During these years I worked for number of companies, sometimes changing places twice or three times a year. They say it takes 10 years to reach 'expert' level, and while I don't think I am an expert by any measure and I have certainly met lots of people who are more knowledgeable, smarter and more focused than I am, I think I can safely say that I had my fair share of the whole programming trade and would like to move on to something else. Psychology and behaviour was always something I was interested in, especially the practical, applicable bits of it. Recently I've been to some communication skills training and I realised that I have been missing out on the great deal of fun stuff - how people work and communicate, especially in subconscious, non-verbal area. Currently I am thinking of making a career change - ideally to move somewhere my technical skill would still be beneficial in some shape or form, or at least could serve as a bridge while I am transitioning there, you know, the whole gradual, bit-by-bit approach versus swim-or-drown one. I would like to hear your thoughts on this matter and to learn from you what are the possible transitions I can take.

  Read the article

• How to fix Black screen?

  - by stupidwhiteguy

  so I recently had my question deleted and merged into a standard how to for blank screens. I am relatively new to This type of computer work and i don't understand the steps nessary to diagnose my problem well enough to solve it so this help full how to has me feeling helpless I can use Ctrl + Alt +F1 and log in So how do I use sudo commands to fix the blank screen on my old dell? sudo lsoci -nn tells me my video card is a ATI rage 128 pro ultra tf /var/log/Xorg.0.log tells me Permission denied that is all i get Sudo apt-get install --reinstall unity tried thay also have also tried Apt-get update and upgrade Please dont close this question without providing an actual answer or if you think it is an exact duplicate provide a solution that worked for that question. I see a lot of these questions as closed and there is no real answer given I will try any solutions available and report results so that others can also solve problems not be overwhelmed by overly broad troubleshooting guides that do nothing to help solve specific issues The nomodeset change from quiet splash also yields no results on reboot I still get a blank screen this screen still has contorl alt f1 abilities but that is it contorl alt f8 causes blinking cursor and F7 gets a crazy flash with green and blue then blank screen Contorl alt f1 a log in prompt in text only when run in recovery mode with failsafe graphics its says the syestem is running in low graphics mode your screen graphics card and input device settings could not be detected correctly. You will need to configure these your self how do i do that? I got this /var/log/failsafeX-backup-120909200641.tar as the location of my log files but i have no idea how to axcess sounds work in blank screen also screen responds or flashes after log in is typed and password entered really any help is good I don't even know where to start I believe 12.04 is installed and functioning but i don't think I can see it at the end of the error log it says error setting mtrr (base= oxf0000000, size= 0x01000000, type=1) inappropriate ioctl for device(25) i have tried to provide as much info as I understand how to provide

  Read the article

• How can I be certain that my code is flawless? [duplicate]

  - by David

  This question already has an answer here: Theoretically bug-free programs 5 answers I have just completed an exercise from my textbook which wanted me to write a program to check if a number is prime or not. I have tested it and seems to work fine, but how can I be certain that it will work for every prime number? public boolean isPrime(int n) { int divisor = 2; int limit = n-1 ; if (n == 2) { return true; } else { int mod = 0; while (divisor <= limit) { mod = n % divisor; if (mod == 0) { return false; } divisor++; } if (mod > 0) { return true; } } return false; } Note that this question is not a duplicate of Theoretically Bug Free Programs because that question asks about whether one can write bug free programs in the face of the the limitative results such as Turing's proof of the incomputability of halting, Rice's theorem and Godel's incompleteness theorems. This question asks how a program can be shown to be bug free.

  Read the article

• Java and C# in web development [on hold]

  - by azalut

  I am wondering whether C# development(ASP.NET) is rather kind of "rapid development" or something "big" like JavaEE/Spring? We all know, that RoR or Django are really rapid-development frameworks - and so - is C# closer to Java "long-timed-development" or to frameworks like the two above - Django, RoR? I am, for now, an amateur Java programmer and sometimes I get annoyed with the amount of code that have to be written to create even a short CRUD app. We need a lot of skills to create at least a small app. I want some change, at least for some time and learn something new. I tried (just few hours) first: RoR, then Django and now I am writing in C#. It seems to be like Java but a little bit extended. In respect of future work as a professional coder - Is it profitable to know both competitive technologies like Java (and its frameworks) and C# with .NET(ASP.NET for example)? Maybe better choice is Python? Or just stop being stupid and still work with Java but with another framework(and master my Java skills) or JavaScript, jQuery to be better at web-development? Actually this question depends on your own opinions that is why I know that this question could be blocked by admins. But main question is in the top of the post I mean: is C# web-development rapid or closer to Java? I am afraid, that if I don't try, I will regret in the future, when I awake and think: oh my god, how could I not get familiar with (another_technology_or_language) Thanks for your attention :) ps I had asked the same question on stackoverflow, but it was hold because of being opinion based. Hope it fits here ;)

  Read the article

• Using onboard and pci-e graphics card at the same time

  - by Endle

  Hello wonderful people. I know there are several other posts with similar questions. I also know how to use Google. I also have read up on posts discussing bumblebee, crossfire, ati catylist and many other interesting topics. I would just like someone to give me advice on how to use the onboard and pci-e graphics at the same time. I know the computer is capable of doing this. It works in Windows. I can use the VGA and DVI onboard port and the HDMI port of the add on card all at the same time. Works great in Windows 7, In Ubuntu, it seems only one or the other will work. I can use any combination of two displays on either adapter: VGA and HDMI..HDMI and DVI..so forth and so on. I have started experimenting with xorg.conf files, but have not been able to get any of them to work. Here is my last attempt at writing an xorg.conf file: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" Screen 2 "Screen2" LeftOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Device" Identifier "Onboard Video" Driver "radeon" BusID "PCI:01:05.0" EndSection Section "Device" Identifier "Graphics Card" Driver "radeon" BusID "PCI:02:00.0" EndSection Section "Monitor" Identifier "CRT2" Option "VendorName" "ViewSonic" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DVI1" VendorName "ACR" ModelName "P224W" Option "DPMS" EndSection Section "Monitor" Identifier "DVI2" Option "VendorName" "Acer" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "Screen0" Device "Onboard Video" Monitor "CRT2" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Graphics Card" Monitor "DVI1" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection

  Read the article

• How do I decide what type of programmer I want to be?

  - by Pearsonartphoto

  I've been working at my current work for some time, and I'm considering a bit of a change of careers. I'm trying to decide what it is exactly that I want to do, and I'm really just not sure. I'm not wanting a solution for my particular case, but what I'd like to know are some generalities of things I can look for. Here are some positions that I'm considering, and what my definitions are (I'm probably calling them something other than what is standard, but hopefully this will do for now). I'm looking for quizzes, articles, explanations, or anything that can help me figure this out. Manager - Managing programmers in some sense, mostly in making sure they are kept working. Coder - A person who is told to make a program do XYZ, and makes it do that. Doesn't have to model anything, or come up with formulas. Algorithm Designer - A person who comes up with a way to make software do something, but doesn't necessarily code that program, at least, not in it's final form. QA - A person who tests code for bugs, preferably with the code in hand. Architect - This person figures out how all of the pieces fit together, is a technical manager of sorts. Maintainer - This person takes someone else's existing code, and makes sure it is fixed when issues arise. Also of some note is figuring out what industry I want to work in. Feel free to add any of your own categories.

  Read the article

• What credentials should I use to access a Windows share?

  - by JMCF125

  H
  i, I have installed Samba and CIFS and all that, followed a bunch of tutorials, but still I can't access a share in the separate Windows 7 machine. Before I could access a share in Ubuntu from Windows, but although now I can't for whatever reason; the error of the attempt to mount the Windows share is the same: 13, asking for credentials (the computer with Windows is off now, but I can add the exact error message later). In /etc/fstab I have: # ... (help info) ... # <file system> <mount point> <type> <options> <dump> <pass> # ... (mounting points that don't matter for the question) ... //192.168.1.2/C\:/Users/Public/Documents /srv/Z\:/ cifs user=guest,password=,uid=1000,iocharset=utf8 0 0 I also tried options such as username=guest,uid=1000,iocharset=utf8 and guest,uid=1000,iocharset=utf8, which, of course, don't work. What user am I supposed to use? (user=user; username=user; my credentials in the Windows and Ubuntu machines do not work, at least with the syntax I tried - similar to this). Even if this worked it's not actually what I want. I wanted to setup an authentication for any one trying to access the drive (it's currently 777, for the Linux share as well) and put a limit/quota on the share's use (as I see Z:on Windows, it allows for the entire C:drive to be filled). Thank you in advance. I'd be glad if you suggested a way to do this even without the last paragraph.

  Read the article

• How can my team avoid frequent errors after refactoring?

  - by SDD64

  to give you a little background: I work for a company with roughly twelve Ruby on Rails developers (+/- interns). Remote work is common. Our product is made out of two parts: a rather fat core, and thin up to big customer projects built upon it. Customer projects usually expand the core. Overwriting of key features does not happen. I might add that the core has some rather bad parts that are in urgent need of refactorings. There are specs, but mostly for the customer projects. The worst part of the core are untested (as it should be...). The developers are split into two teams, working with one or two PO for each sprint. Usually, one customer project is strictly associated with one of the teams and POs. Now our problem: Rather frequently, we break each others stuff. Some one from Team A expands or refactors the core feature Y, causing unexpected errors for one of Team B's customer projects. Mostly, the changes are not announced over the teams, so the bugs hit almost always unexpected. Team B, including the PO, thought about feature Y to be stable and did not test it before releasing, unaware of the changes. How to get rid of those problems? What kind of 'announcement technique' can you recommend me?

  Read the article

• Uralelektrostroy Improves Turnaround Times for Engineering and Construction Projects by Approximately 50% with Better Project Data Management

  - by Melissa Centurio Lopes

  LLC Uralelektrostroy was established in 1998, to meet the growing demand for reliable energy supply, which included the deployment and operation of a modern power grid system for Russia’s booming economy and industrial sector. To rise to the challenge, the country required a company with a strong reputation and the ability to strategically operate energy production and distribution facilities. As a renowned energy expert, Uralelektrostroy successfully embarked on the mission—focusing on the design, construction, and operation of power grids, transmission lines, and generation facilities. Today, Uralelektrostroy leads the Russian utilities industry with operations across the country, particularly in the Ural, Western Siberia, and Moscow regions. Challenges: Track work progress through all engineering project development stages with ease—from planning and start-up operations, to onsite construction and quality assurance—to enhance visibility into complex projects, such as power grid and power-transmission-line construction Implement and execute engineering projects faster—for example, designing and building power generation and distribution facilities—by better monitoring numerous local subcontractors Improve alignment of project schedules with project owners’ requirements—awarding federal and regional authorities—to avoid incurring fines for missing deadlines Solutions: Used Oracle’s Primavera P6 Enterprise Project Portfolio Management 8.1 to streamline communication with customers and subcontractors through better data management and harmonized reporting, reducing construction project implementation and turnaround times by approximately 50%, on average Enabled fast generation of work-in-progress reports that track project schedules, budgets, materials, and staffing—from approval and material procurement, to construction and delivery Reduced the number of construction sites by nearly 30% (from 35 to 25) by identifying unprofitable sites—streamlining operations at the company’s construction site network and increasing profitability Improved project visibility by enabling managers to efficiently track project status, ensuring on-time reporting and punctual project deliveries to federal customers to reduce delay penalties to zero “Oracle’s Primavera P6 Enterprise Project Portfolio Management 8.1 drastically changed the way we run our business. We’ve reduced the number of redundant assets, streamlined project implementation and execution, and improved collaboration with our customers and contractors. Overall, the Oracle deployment helped to increase our profitability.” – Roman Aleksandrovich Naumenko, Head of Information Technology, LLC Uralelektrostroy Read the complete customer snapshot here.

  Read the article

• Static / Shared Helper Functions vs Built-In Methods

  - by Nathan

  This is a simple question but a design consideration that I often run across in my day to day development work. Lets say that you have a class that represents some kinds of collection. Public Class ModifiedCustomerOrders Public Property Orders as List(Of ModifiedOrders) End Class Within this class you do all kinds of important work, such as combining many different information sources and, eventually, build the Modified Customer Orders. Now, you have different processes that consume this class, each of which needs a slightly different slice of the ModifiedCustomerOrders items. To enable this, you want to add filtering functionality. How do you go about this? Do you: Add Filtering calls to the ModifiedCustomerOrders class so that you can say: MyOrdersClass.RemoveCanceledOrders() Create a Static / Shared "tooling" class that allows you to call: OrdersFilters.RemoveCanceledOrders(MyOrders) Create an extension method to accomplish the same feat as #2 but with less typing: MyOrders.RemoveCanceledOrders() Create a "Service" method that handles the getting of Orders as appropriate to the calling function, while using one of the previous approaches "under the hood". OrdersService.GetOrdersForProcessA() Others? I tend to prefer the tooling / extension method approaches as they make testing a little bit simpler. Although I dependency inject all my sourcing data into the ModifiedCustomerOrders, having it as part of the class makes it a little bit more complicated to test. Typically, I choose to use extension methods where I am doing parameterless transformations / filters. As they get more complex, I will move it into a static class instead. Thoughts on this approach? How would you approach it?

  Read the article

• UDK - How to make sure a PhysicalMaterial mask actually works?

  - by tomacmuni

  Hello, I have been reading the documentation for UDK about physical materials and masks. I have my 1bit BMP mask, and the two physical material assets I want to shoot off in the black and white channels. I have applied my material to both a rigid body and to a skeletal mesh and neither apparently uses the mask. If I assign a regular physical material (one that doesn't use a mask) then it will work fine, but this defeats the point because it gives only one hit reaction. In the documentation it states that it is possible to extend a class on which we want to use a physical material based on the KActor class's usage. How to do that? Here is the quote: "The following properties [ie, ImpactEffect - Particle system to spawn at the point of impact + ImpactSound - Sound to play when an impact occurs] allow you to attach sounds and effects to physical collisions. These only work on classes which support them, which at the moment is only KActor. By looking at the implementation in KActor though, you can add this functionality to other classes (or you can subclass KActor)." Essentially, how to make sure a PhysicalMaterial mask actually works? What code could be added to a skeletal mesh class perhaps, to get it going? Any help appreciated.

  Read the article

• How can I reduce the amount of time it takes to fully regression test an application ready for release?

  - by DrLazer

  An app I work on is being developed with a modified version of scrum. If you are not familiar with scrum, it's just an alternative approach to a more traditional watefall model, where a series of features are worked on for a set amount of time known as a sprint. The app is written in C# and makes use of WPF. We use Visual C# 2010 Express edition as an IDE. If we work on a sprint and add in a few new features, but do not plan to release until a further sprint is complete, then regression testing is not an issue as such. We just test the new features and give the app a good once over. However, if a release is planned that our customers can download - a full regression test is factored in. In the past this wasn't a big deal, it took 3 or 4 days and the devs simply fix up any bugs found in the regression phase, but now, as the app is getting larger and larger and incorporating more and more features, the regression is spanning out for weeks. I am interested in any methods that people know of or use that can decrease this time. At the moment the only ideas I have are to either start writing Unit Tests, which I have never fully tried out in a commercial environment, or to research the possibilty of any UI Automation API's or tools that would allow me to write a program to perform a series of batch tests. I know literally nothing about the possibilities of UI automation so any information would be valuable. I don't know that much about Unit testing either, how complicated can the tests be? Is it possible to get Unit tests to use the UI? Are there any other methods I should consider? Thanks for reading, and for any advice in advance.

  Read the article

• PHP Debugging

  - by Bob Porter

  Originally posted on: http://geekswithblogs.net/blogofbob/archive/2013/06/25/php-debugging.aspxI have been experimenting setting up a PHP development environment. I have been trying on Windows, Linux (Ubuntu) and Mac OS X. So far my favorite environment is on Mac OS X. I have tried a number of IDE's and debuggers as well.  IDE's Eclipse with the PDT Add On The PDT version of Eclipse Aptana Zend Netbeans  Debuggers Zend XDebug So far the only environments that I could get running quickly were Zend and Netbeans. Eclipse is a nightmare of versions and capabilities. I could only get Eclipse working well on Windows. On Ubuntu I was able to get the debugger working once. Thats it, one session, then it never worked again. I love the Zend tools and environment and it worked well everywhere I tried it, but it was beyond my budget.  Aptana also worked best on Windows, on Mac OS X it was fragile and I never could get debugging to work.  Netbeans worked first time, every time, every where. With one oddity, after several debugging sessions the debugger would refuse to connect. On every platform, I would end having to reboot to restore debugging, which would then work correctly for quite some time. I am sure I will discover that some process is hanging and there is a less intrusive way to clear the issue, but for now rebooting always works. In a future post I will go over how exactly I set my environment up, for now I have decided to stay with OS X. By the way, I did NOT use MAMP or the Zend Server, I stuck with PHP compiled and built from source, as well as Apache and MySQL installed locally. I use Homebrew as a package manager for OS X. I tried PORT but did not like the fact I had to sudo all the time to use it, and it installed things in /opt which I was not used to. Homebrew does sandbox the apps but it is nice enough to symlink them to their "normal" locations usually in /usr/local.

  Read the article

< Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >