Search Results

Search found 1868 results on 75 pages for 'board'.

Page 45/75 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

  • Does the size of the monitor Matter?

    - by Arsheep
    I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

    Read the article

  • Does the size of the monitor Matter?

    - by Arsheep
    I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

    Read the article

  • Redirecting and Remapping with mod_rewrite

    - by Droid646197
    First of all, am new to doing back-end server admin.. I have a main website being served on at certain IP. I have a blog address that lives on another IP, which was used on wordpress.com. When a user typed in blog.domain.com it would resolve to the Wordpress.com site. Since coming on board (two months) they wanted me to bring the blog in house. So, I set up a wordpress install at domain.com/blog. I would like blog.domain.com (different ip) to resolve to domain.com/blog but still using blog.domain.com is this possible with Apache and mod_rewrite?

    Read the article

  • Acer Aspire 5532 crashes with no warning

    - by keenan
    I have an Acer Aspire 5532. I don't have more specs off the top of my head but from what I've looked up it has all the factory stock stuff in. My keyboard is completely shot and doesn't work at all. It was working fine for quite a while, however I go to get on it Thanksgiving night and all of a sudden it just crashes with no warning. I try to restart it and it beeps 3 times with about 15 seconds in between each beep. After that it will go to start up and get to the log in screen, and about 3 minutes later it will crash again with absolutely no warning. The same thing happens every time I try to start it up. I've taken it completely apart and cleaned the fan and all the airways. I made sure all the connections are good (or at least all the ones that I can get to above the mother board), put it back together and I get the same problem.

    Read the article

  • Does the size of the monitor Matter?

    - by Arsheep
    I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

    Read the article

  • Failing Seagate HDD - Not Recognised

    - by thefragileomen
    I am having a look at a friend's computer which contains a 500GB Seagate HDD. Unfortunately the HDD is not recognised by the BIOS menu and it beeps 11 times upon powerup. I've moved the HDD to another laptop but the problem remains. I've downloaded SeaTools for DOS (Seagate's Diagnostic tool) but unfortunately to no avail and the disc remains unseen when using this DOS boot disc. The HDD is only 6 months old so I'm very surprised at this but it appears a common problem with Seagate 2.5" HDDs as well as other HDDs manufactured by Seagate. I intend to try it in an external caddy on Thursday when back in work and also through a forensic writeblocker but just wondering if anyone has any other suggestions? I am of the opinion it is some chip on the HDD board which prevents it spinning due to a fault. If so, I've lost to deactivate this just so I can simply recover the data on the drive and start with a new disc. Thanks

    Read the article

  • How can I access cpu temperature readings using c#?

    - by Paul
    For a programming project I would like to access the temperature readings from my CPU and GPUs. I will be using C#. From various forums I get the impression that there is specific information and developer resources you need in order to access that information for various boards. I have a MSI NF750-G55 board. MSI's website does not have any of the information I am looking for. I tried their tech support and the rep I spoke with stated they do not have any such information. There must be a way to obtain that info. Any thoughts?

    Read the article

  • Vostro 1520 crash during bios update

    - by Deadmilkman
    My Vostro 1520 (P8700 C2D) originally came with BIOS A02. This bios version have known problems with VT, so I had to upgrade to A05. During the upgrade, the notebook crashed. Needless to say, it won't boot anymore. The simple question is: is there a way to access the bios boot block to recover the bad flash with a crisis disk? I know that the MINI and the ALIENWARE models have this feature, but I can't seem to find anything about it in the Vostro machines. Any help will be much appreciated. PS: Dell's solution is to change the motherboard, but it will take several days, as the board isn't available in my country :( Regards, Deadmilkman

    Read the article

  • Removing BIOS Post Messages

    - by Steve
    I am working on a project where a standard x86 desktop system will boot and run a single program until it is shut down. I would like to remove all the bios post messages so that it looks a little more "finished" and cleaner when it starts up. I was hoping that there might by a standard implementation/terms to know about so I can avoid having to dig through every manual to see if there are options, or get some advice on a standard set of tools I should be using. I was thinking about getting a board that has an image that covers up the post messages until you press a key and trying to customize it to all black, but it's not clear if this is a good direction. I started looking for OEM motherboards but my searches were filled with standard commercial stuff, or seemed to be way to big for my toy project. What is the best way to go about removing all the bios post messages and just having a blank screen or "loading" message until OS loads?

    Read the article

  • Is there a fix for an iMac G5 annoying screen pattern issue?

    - by smountcastle
    It's probably a hardware issue, but I was hoping that someone might know of other options to try. My iMac G5 (the revision just before the built-in iSight was introduced) has developed an annoying pattern of short/wide rectangles in a pinkish hue across the screen. I've followed Apple's instructions to ensure that the logic board hasn't failed (by resetting the SMU and watching the internal LEDs light-up). I suspect either the LCD or video card has failed. Below are two screen shots, one taken by my iPhone which exhibits the problem and a snapshot taking from the faulty iMac which looks fine.

    Read the article

  • I suspect that my HDD is causing hardlocks, as all other components have been replaced. How can I check this theory and solve the potential cause?

    - by user867814
    I have had this problem over quite a while now, thorough multiple Linux kernel versions and distributions, as well as replacement of all components, aside from my main HDD - RAM, GPU(twice), mother board, CPU, power supply. What happens is, at one point during the operation of the PC, it will hardlock - everything stops working, external HDD is not shut down correctly and continues to spin until I plug it out and in, there are no system/kernel logs of any kind, and no otherwise nothing that would suggest a cause. Another reason for my suspicion is that the failures happen almost exclusively during HDD read/write activity - shutdown(happens nearly 1/3 of the time so far, it's only been few days though), launching programs, and once during operation of apt. I hope the post is descriptive enough, if you need any additional info, ask(and tell me how to prepare/obtain it), and I will provide. If I'm wrong, point me in the right direction. Thanks in advance.

    Read the article

  • Computer loads BIOS, but won't load OS

    - by LEGEND383
    I have just purchased a brand new motherboard bundle, installed into the old case with the old PSU and the old HDD. I can get into the BIOS, but whenever I try to boot from the HDD, it just sits with the fans going, but nothing is displayed. The moniter works (tested with another machine), and I'd hope there are no problems with the motherboard, CPU or RAM because as I said I only brought them today. The only things I can think of are: The PSU's motherboard connector is a 20-pin, and the motherboard has a 24-pin connector (not a problem with the previous board) The OS is not supported (doesn't seem likly to me, but possible I guess) Here is my system configuration: Motherboard: ASUS F1A55-M le CPU: AMD APU A6 3500 HDD: 1Tb SATA RAM: 4Gb DDR3 OS: Ubuntu Satanic v666.9 PSU: Winpower ATX-400 (this thing is REALLY old) If anyone is able to offer a reason as to why this is not working, or a possible solution, it would be greatly appriciated.

    Read the article

  • Windows 7: How to stop/start service from commandline (like services.msc does it)?

    - by john
    I have developed a program in Java that uses on a local SQL Server instance to store its data. On some installations the SQL Server instance is not running sometimes. Users can fix this problem by manually starting the SQL Server instance (via services.msc). I am thinking about automating this task: the software would check if the database server is reachable, if not try to (re)start it. The problem is that on the same user account the Services can be stopped /started via services.msc (without any UAC prompt), but not via (non-elevated) command line. The operating system seems to treat services.msc differently: c:\>sc start mssql$db1 [SC] StartService: OpenService FEHLER 5: Zugriff verweigert (Access denied) c:\>net start mssql$db1 Systemfehler 5 aufgetreten. Zugriff verweigert (Access denied) So the question is: how can I stop/start the service from a java-program/command line without having my users to use services.msc (preferrably via on-board-tools)

    Read the article

  • Motherboard dual gfx power question

    - by user33931
    1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

    Read the article

  • Booting drops to EFI shell but boots normally if exit'ed

    - by wittybear
    (first post here... I'm normally on stackoverflow) I'm booting an Intel ME 5788 board which uses EFI (a replacement for BIOS). On boot it drops out to the EFI Shell and the 'map' shows the drive as a blockdevice but there is no filesystem device mapped. If I just type 'exit' it boots normally to windows 7 and the configuration (using bcdedit.exe) looks fine. I'm confused - surely if its not been able to map the blockdevice as a filesystem device it should not boot? I would like to be able to get the boot to proceed without my interaction - does anyone know how to do it? (Also there is no Boot Manager options available in the shell, i.e. autoboot, bcfg etc)

    Read the article

  • Like to Upgrade My PC (7 year old) - for animation and hardcore gaming ! - help me [closed]

    - by sri
    I like to buy a new computer for my studies and as well as gaming. My old pc has 1.5 GB RAM with 512MB Graphics card. And it is very old to run Adobe CS5 version and other high end animation software. My budget will be INR 20k-25k. I have 500GB hard disk, keyboard and mouse new. So apart from this, I like to buy : Intel or AMD is good ? My idea is : Corei5 or Corei7 = which is best and economy ? Which mother board. 4 GB RAM with upto 8 GB RAM slot for future upgrade. 1 GB or 2 GB Graphic card - which one ? If I am wrong - please suggest me

    Read the article

  • How do I set up a mailing list for over 2000 people?

    - by John Hoffman
    I manage IT for a large organization with over 2000 people. The administration would like to send an email (often with up to 5 word document attachments) about once per week. They also want to categorize people. For instance, about 40 people are "teachers," about 1800 people are "students," and about 10 people are "board members." They may send an email to any combination of these categories. Here's what I have tried: I bought a server, installed Ubuntu server edition on it, and wrote a python script to send out their emails. However, pretty soon, mail services such as Gmail and Yahoo began to treat the mail I send out as SPAM. I'm guessing this is because I am sending an email with 2000+ people in the "bcc" field. Maintaining this server also takes a lot of time. How do I set up a mailing list for over 2000 people? Must I defer to paid services?

    Read the article

  • Possible iphone animation timing/rendering bug?

    - by David
    Hi all, I have been working on an iphone apps for several weeks. Now I encounter an animation problem that I can't figure out how to resolve. Mayhbe you can help. Here is the details (a little long, bear with me): Basically the effect I want to achieve is, when user click a button, a loading view pops up, hiding the whole screen; and then the apps does a lot of heavy computation, which takes a few seconds. Once the computation is done, soem result views (something likes checkers on a checker board) are rendered under the loading view. Once all result views are rendered, I used animation animation to remove the loading view nand show the result views to the user. Here is what I do: when user click a button, run this code: [UIView beginAnimations:nil context:nil]; [UIView setAnimationDuration:1.0]; [UIView setAnimationBeginsFromCurrentState:YES]; [UIView setAnimationTransition:UIViewAnimationTransitionCurlDown forView:self.view cache:YES]; [UIView setAnimationDelegate:self]; [UIView setAnimationDidStopSelector:@selector(loadingViewInserted:finished:context:)]; // use a really high index number so it will always on top [self.view insertSubview:loadingViewController.view atIndex:1000]; [UIView commitAnimations]; In the "loadingViewInserted" function, it calls another function doing the heavy computation work. Once the computation is done, a lot of result views (like checkers on a checker board) are rendered under the loading view. for(int colIndex = 1; colIndex <= result.columns; colIndex++) { for(int rowIndex = 1; rowIndex <= result.rows; rowIndex++) { ResultView *rv = [ResultView resultViewWithData:results[colIndex][rowIndex]]; [self.view addSubview:rv]; } } Once all result views are added, following animation is invoked to remove the loading view: [UIView beginAnimations:nil context:nil]; [UIView setAnimationDuration:1.0]; [UIView setAnimationBeginsFromCurrentState:YES]; [UIView setAnimationTransition:UIViewAnimationTransitionCurlUp forView:self.view cache:YES]; [loadingViewController.view removeFromSuperview]; [UIView commitAnimations]; By doing this, most of the time (maybe 90%) it does exactly what I want. However, sometime I see some weird result: the loading view shows up first as expected, then before it disappears, some result views, which suppose to be under the loading view, suddenly appears on top of the loading view; and some of them are partial rendered. And then the loading view curled up, and everything looks normal again. The weird situation only lasts for less than a second, but already bad enough to screw up the UI. I have tried all different kinds of thing to fix this (using another thread to remove the loading view, make the loading view non-transparent), but none of them works. The only thing that makes a little better is, I hide all the result views first; after the last animation finished, in its call back, unhide all result views. But this loses the nice effect that when curling up the loading view, the results are already there. At this point, I really think this is a bug in iphone (I compile it with OS 3.0) OS. Or maybe you can point out what I have done wrong (or could do differently). (thanks for finishing this long post, :-) )

    Read the article

  • Intel Corporation Ethernet Connection does not start properly

    - by Oscar Alejos
    I'm experiencing some problems when trying to connect my PC to the router through a switch. When the PC is directly connected to the router, everything works fine, Ubuntu (14.04) starts normally, and the Internet connection runs inmediately. The Ethernet controller is the Intel Corporation Ethernet Connection, as lspci returns: $ lspci | grep Eth 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) However, when I try to connect through the switch what I get is the following. dmesg returns: $ dmesg | grep eth [ 1.035585] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.035587] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a7:be:5d [ 1.035589] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.035625] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.357838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165413] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165574] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.641287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.715086] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 16.715090] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 16.715117] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready It looks like eth0 is properly working. Actually, nm-tool returns: $ nm-tool - Device: eth0 [Conexión cableada] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: 00:22:4D:A7:BE:5D Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.30 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 80.58.61.250 DNS: 80.58.61.254 DNS: 192.168.1.1 However, ping returns: $ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. From 192.168.1.30 icmp_seq=1 Destination Host Unreachable From 192.168.1.30 icmp_seq=2 Destination Host Unreachable From 192.168.1.30 icmp_seq=3 Destination Host Unreachable The connection is restored by restarting it: # ifconfig eth0 down # ifconfig eth0 up From this point on, everything runs smoothly, as if the PC were directly connected to the router. It seems to be an issue related to the integrated LAN adaptor and the Ethernet controller, since my laptop connects without any problem. My desktop board is an Intel DB85FL. I'd be grateful if anyone could give some ideas on how to solve this issue. Thank you in advance.

    Read the article

  • Agile Development

    - by James Oloo Onyango
    Alot of literature has and is being written about agile developement and its surrounding philosophies. In my quest to find the best way to express the importance of agile methodologies, i have found Robert C. Martin's "A Satire Of Two Companies" to be both the most concise and thorough! Enjoy the read! Rufus Inc Project Kick Off Your name is Bob. The date is January 3, 2001, and your head still aches from the recent millennial revelry. You are sitting in a conference room with several managers and a group of your peers. You are a project team leader. Your boss is there, and he has brought along all of his team leaders. His boss called the meeting. "We have a new project to develop," says your boss's boss. Call him BB. The points in his hair are so long that they scrape the ceiling. Your boss's points are just starting to grow, but he eagerly awaits the day when he can leave Brylcream stains on the acoustic tiles. BB describes the essence of the new market they have identified and the product they want to develop to exploit this market. "We must have this new project up and working by fourth quarter October 1," BB demands. "Nothing is of higher priority, so we are cancelling your current project." The reaction in the room is stunned silence. Months of work are simply going to be thrown away. Slowly, a murmur of objection begins to circulate around the conference table.   His points give off an evil green glow as BB meets the eyes of everyone in the room. One by one, that insidious stare reduces each attendee to quivering lumps of protoplasm. It is clear that he will brook no discussion on this matter. Once silence has been restored, BB says, "We need to begin immediately. How long will it take you to do the analysis?" You raise your hand. Your boss tries to stop you, but his spitwad misses you and you are unaware of his efforts.   "Sir, we can't tell you how long the analysis will take until we have some requirements." "The requirements document won't be ready for 3 or 4 weeks," BB says, his points vibrating with frustration. "So, pretend that you have the requirements in front of you now. How long will you require for analysis?" No one breathes. Everyone looks around to see whether anyone has some idea. "If analysis goes beyond April 1, we have a problem. Can you finish the analysis by then?" Your boss visibly gathers his courage: "We'll find a way, sir!" His points grow 3 mm, and your headache increases by two Tylenol. "Good." BB smiles. "Now, how long will it take to do the design?" "Sir," you say. Your boss visibly pales. He is clearly worried that his 3 mms are at risk. "Without an analysis, it will not be possible to tell you how long design will take." BB's expression shifts beyond austere.   "PRETEND you have the analysis already!" he says, while fixing you with his vacant, beady little eyes. "How long will it take you to do the design?" Two Tylenol are not going to cut it. Your boss, in a desperate attempt to save his new growth, babbles: "Well, sir, with only six months left to complete the project, design had better take no longer than 3 months."   "I'm glad you agree, Smithers!" BB says, beaming. Your boss relaxes. He knows his points are secure. After a while, he starts lightly humming the Brylcream jingle. BB continues, "So, analysis will be complete by April 1, design will be complete by July 1, and that gives you 3 months to implement the project. This meeting is an example of how well our new consensus and empowerment policies are working. Now, get out there and start working. I'll expect to see TQM plans and QIT assignments on my desk by next week. Oh, and don't forget that your crossfunctional team meetings and reports will be needed for next month's quality audit." "Forget the Tylenol," you think to yourself as you return to your cubicle. "I need bourbon."   Visibly excited, your boss comes over to you and says, "Gosh, what a great meeting. I think we're really going to do some world shaking with this project." You nod in agreement, too disgusted to do anything else. "Oh," your boss continues, "I almost forgot." He hands you a 30-page document. "Remember that the SEI is coming to do an evaluation next week. This is the evaluation guide. You need to read through it, memorize it, and then shred it. It tells you how to answer any questions that the SEI auditors ask you. It also tells you what parts of the building you are allowed to take them to and what parts to avoid. We are determined to be a CMM level 3 organization by June!"   You and your peers start working on the analysis of the new project. This is difficult because you have no requirements. But from the 10-minute introduction given by BB on that fateful morning, you have some idea of what the product is supposed to do.   Corporate process demands that you begin by creating a use case document. You and your team begin enumerating use cases and drawing oval and stick diagrams. Philosophical debates break out among the team members. There is disagreement as to whether certain use cases should be connected with <<extends>> or <<includes>> relationships. Competing models are created, but nobody knows how to evaluate them. The debate continues, effectively paralyzing progress.   After a week, somebody finds the iceberg.com Web site, which recommends disposing entirely of <<extends>> and <<includes>> and replacing them with <<precedes>> and <<uses>>. The documents on this Web site, authored by Don Sengroiux, describes a method known as stalwart-analysis, which claims to be a step-by-step method for translating use cases into design diagrams. More competing use case models are created using this new scheme, but again, people can't agree on how to evaluate them. The thrashing continues. More and more, the use case meetings are driven by emotion rather than by reason. If it weren't for the fact that you don't have requirements, you'd be pretty upset by the lack of progress you are making. The requirements document arrives on February 15. And then again on February 20, 25, and every week thereafter. Each new version contradicts the previous one. Clearly, the marketing folks who are writing the requirements, empowered though they might be, are not finding consensus.   At the same time, several new competing use case templates have been proposed by the various team members. Each template presents its own particularly creative way of delaying progress. The debates rage on. On March 1, Prudence Putrigence, the process proctor, succeeds in integrating all the competing use case forms and templates into a single, all-encompassing form. Just the blank form is 15 pages long. She has managed to include every field that appeared on all the competing templates. She also presents a 159- page document describing how to fill out the use case form. All current use cases must be rewritten according to the new standard.   You marvel to yourself that it now requires 15 pages of fill-in-the-blank and essay questions to answer the question: What should the system do when the user presses Return? The corporate process (authored by L. E. Ott, famed author of "Holistic Analysis: A Progressive Dialectic for Software Engineers") insists that you discover all primary use cases, 87 percent of all secondary use cases, and 36.274 percent of all tertiary use cases before you can complete analysis and enter the design phase. You have no idea what a tertiary use case is. So in an attempt to meet this requirement, you try to get your use case document reviewed by the marketing department, which you hope will know what a tertiary use case is.   Unfortunately, the marketing folks are too busy with sales support to talk to you. Indeed, since the project started, you have not been able to get a single meeting with marketing, which has provided a never-ending stream of changing and contradictory requirements documents.   While one team has been spinning endlessly on the use case document, another team has been working out the domain model. Endless variations of UML documents are pouring out of this team. Every week, the model is reworked.   The team members can't decide whether to use <<interfaces>> or <<types>> in the model. A huge disagreement has been raging on the proper syntax and application of OCL. Others on the team just got back from a 5-day class on catabolism, and have been producing incredibly detailed and arcane diagrams that nobody else can fathom.   On March 27, with one week to go before analysis is to be complete, you have produced a sea of documents and diagrams but are no closer to a cogent analysis of the problem than you were on January 3. **** And then, a miracle happens.   **** On Saturday, April 1, you check your e-mail from home. You see a memo from your boss to BB. It states unequivocally that you are done with the analysis! You phone your boss and complain. "How could you have told BB that we were done with the analysis?" "Have you looked at a calendar lately?" he responds. "It's April 1!" The irony of that date does not escape you. "But we have so much more to think about. So much more to analyze! We haven't even decided whether to use <<extends>> or <<precedes>>!" "Where is your evidence that you are not done?" inquires your boss, impatiently. "Whaaa . . . ." But he cuts you off. "Analysis can go on forever; it has to be stopped at some point. And since this is the date it was scheduled to stop, it has been stopped. Now, on Monday, I want you to gather up all existing analysis materials and put them into a public folder. Release that folder to Prudence so that she can log it in the CM system by Monday afternoon. Then get busy and start designing."   As you hang up the phone, you begin to consider the benefits of keeping a bottle of bourbon in your bottom desk drawer. They threw a party to celebrate the on-time completion of the analysis phase. BB gave a colon-stirring speech on empowerment. And your boss, another 3 mm taller, congratulated his team on the incredible show of unity and teamwork. Finally, the CIO takes the stage to tell everyone that the SEI audit went very well and to thank everyone for studying and shredding the evaluation guides that were passed out. Level 3 now seems assured and will be awarded by June. (Scuttlebutt has it that managers at the level of BB and above are to receive significant bonuses once the SEI awards level 3.)   As the weeks flow by, you and your team work on the design of the system. Of course, you find that the analysis that the design is supposedly based on is flawedno, useless; no, worse than useless. But when you tell your boss that you need to go back and work some more on the analysis to shore up its weaker sections, he simply states, "The analysis phase is over. The only allowable activity is design. Now get back to it."   So, you and your team hack the design as best you can, unsure of whether the requirements have been properly analyzed. Of course, it really doesn't matter much, since the requirements document is still thrashing with weekly revisions, and the marketing department still refuses to meet with you.     The design is a nightmare. Your boss recently misread a book named The Finish Line in which the author, Mark DeThomaso, blithely suggested that design documents should be taken down to code-level detail. "If we are going to be working at that level of detail," you ask, "why don't we simply write the code instead?" "Because then you wouldn't be designing, of course. And the only allowable activity in the design phase is design!" "Besides," he continues, "we have just purchased a companywide license for Dandelion! This tool enables 'Round the Horn Engineering!' You are to transfer all design diagrams into this tool. It will automatically generate our code for us! It will also keep the design diagrams in sync with the code!" Your boss hands you a brightly colored shrinkwrapped box containing the Dandelion distribution. You accept it numbly and shuffle off to your cubicle. Twelve hours, eight crashes, one disk reformatting, and eight shots of 151 later, you finally have the tool installed on your server. You consider the week your team will lose while attending Dandelion training. Then you smile and think, "Any week I'm not here is a good week." Design diagram after design diagram is created by your team. Dandelion makes it very difficult to draw these diagrams. There are dozens and dozens of deeply nested dialog boxes with funny text fields and check boxes that must all be filled in correctly. And then there's the problem of moving classes between packages. At first, these diagram are driven from the use cases. But the requirements are changing so often that the use cases rapidly become meaningless. Debates rage about whether VISITOR or DECORATOR design patterns should be used. One developer refuses to use VISITOR in any form, claiming that it's not a properly object-oriented construct. Someone refuses to use multiple inheritance, since it is the spawn of the devil. Review meetings rapidly degenerate into debates about the meaning of object orientation, the definition of analysis versus design, or when to use aggregation versus association. Midway through the design cycle, the marketing folks announce that they have rethought the focus of the system. Their new requirements document is completely restructured. They have eliminated several major feature areas and replaced them with feature areas that they anticipate customer surveys will show to be more appropriate. You tell your boss that these changes mean that you need to reanalyze and redesign much of the system. But he says, "The analysis phase is system. But he says, "The analysis phase is over. The only allowable activity is design. Now get back to it."   You suggest that it might be better to create a simple prototype to show to the marketing folks and even some potential customers. But your boss says, "The analysis phase is over. The only allowable activity is design. Now get back to it." Hack, hack, hack, hack. You try to create some kind of a design document that might reflect the new requirements documents. However, the revolution of the requirements has not caused them to stop thrashing. Indeed, if anything, the wild oscillations of the requirements document have only increased in frequency and amplitude.   You slog your way through them.   On June 15, the Dandelion database gets corrupted. Apparently, the corruption has been progressive. Small errors in the DB accumulated over the months into bigger and bigger errors. Eventually, the CASE tool just stopped working. Of course, the slowly encroaching corruption is present on all the backups. Calls to the Dandelion technical support line go unanswered for several days. Finally, you receive a brief e-mail from Dandelion, informing you that this is a known problem and that the solution is to purchase the new version, which they promise will be ready some time next quarter, and then reenter all the diagrams by hand.   ****   Then, on July 1 another miracle happens! You are done with the design!   Rather than go to your boss and complain, you stock your middle desk drawer with some vodka.   **** They threw a party to celebrate the on-time completion of the design phase and their graduation to CMM level 3. This time, you find BB's speech so stirring that you have to use the restroom before it begins. New banners and plaques are all over your workplace. They show pictures of eagles and mountain climbers, and they talk about teamwork and empowerment. They read better after a few scotches. That reminds you that you need to clear out your file cabinet to make room for the brandy. You and your team begin to code. But you rapidly discover that the design is lacking in some significant areas. Actually, it's lacking any significance at all. You convene a design session in one of the conference rooms to try to work through some of the nastier problems. But your boss catches you at it and disbands the meeting, saying, "The design phase is over. The only allowable activity is coding. Now get back to it."   ****   The code generated by Dandelion is really hideous. It turns out that you and your team were using association and aggregation the wrong way, after all. All the generated code has to be edited to correct these flaws. Editing this code is extremely difficult because it has been instrumented with ugly comment blocks that have special syntax that Dandelion needs in order to keep the diagrams in sync with the code. If you accidentally alter one of these comments, the diagrams will be regenerated incorrectly. It turns out that "Round the Horn Engineering" requires an awful lot of effort. The more you try to keep the code compatible with Dandelion, the more errors Dandelion generates. In the end, you give up and decide to keep the diagrams up to date manually. A second later, you decide that there's no point in keeping the diagrams up to date at all. Besides, who has time?   Your boss hires a consultant to build tools to count the number of lines of code that are being produced. He puts a big thermometer graph on the wall with the number 1,000,000 on the top. Every day, he extends the red line to show how many lines have been added. Three days after the thermometer appears on the wall, your boss stops you in the hall. "That graph isn't growing quickly enough. We need to have a million lines done by October 1." "We aren't even sh-sh-sure that the proshect will require a m-million linezh," you blather. "We have to have a million lines done by October 1," your boss reiterates. His points have grown again, and the Grecian formula he uses on them creates an aura of authority and competence. "Are you sure your comment blocks are big enough?" Then, in a flash of managerial insight, he says, "I have it! I want you to institute a new policy among the engineers. No line of code is to be longer than 20 characters. Any such line must be split into two or more preferably more. All existing code needs to be reworked to this standard. That'll get our line count up!"   You decide not to tell him that this will require two unscheduled work months. You decide not to tell him anything at all. You decide that intravenous injections of pure ethanol are the only solution. You make the appropriate arrangements. Hack, hack, hack, and hack. You and your team madly code away. By August 1, your boss, frowning at the thermometer on the wall, institutes a mandatory 50-hour workweek.   Hack, hack, hack, and hack. By September 1st, the thermometer is at 1.2 million lines and your boss asks you to write a report describing why you exceeded the coding budget by 20 percent. He institutes mandatory Saturdays and demands that the project be brought back down to a million lines. You start a campaign of remerging lines. Hack, hack, hack, and hack. Tempers are flaring; people are quitting; QA is raining trouble reports down on you. Customers are demanding installation and user manuals; salespeople are demanding advance demonstrations for special customers; the requirements document is still thrashing, the marketing folks are complaining that the product isn't anything like they specified, and the liquor store won't accept your credit card anymore. Something has to give.    On September 15, BB calls a meeting. As he enters the room, his points are emitting clouds of steam. When he speaks, the bass overtones of his carefully manicured voice cause the pit of your stomach to roll over. "The QA manager has told me that this project has less than 50 percent of the required features implemented. He has also informed me that the system crashes all the time, yields wrong results, and is hideously slow. He has also complained that he cannot keep up with the continuous train of daily releases, each more buggy than the last!" He stops for a few seconds, visibly trying to compose himself. "The QA manager estimates that, at this rate of development, we won't be able to ship the product until December!" Actually, you think it's more like March, but you don't say anything. "December!" BB roars with such derision that people duck their heads as though he were pointing an assault rifle at them. "December is absolutely out of the question. Team leaders, I want new estimates on my desk in the morning. I am hereby mandating 65-hour work weeks until this project is complete. And it better be complete by November 1."   As he leaves the conference room, he is heard to mutter: "Empowermentbah!" * * * Your boss is bald; his points are mounted on BB's wall. The fluorescent lights reflecting off his pate momentarily dazzle you. "Do you have anything to drink?" he asks. Having just finished your last bottle of Boone's Farm, you pull a bottle of Thunderbird from your bookshelf and pour it into his coffee mug. "What's it going to take to get this project done? " he asks. "We need to freeze the requirements, analyze them, design them, and then implement them," you say callously. "By November 1?" your boss exclaims incredulously. "No way! Just get back to coding the damned thing." He storms out, scratching his vacant head.   A few days later, you find that your boss has been transferred to the corporate research division. Turnover has skyrocketed. Customers, informed at the last minute that their orders cannot be fulfilled on time, have begun to cancel their orders. Marketing is re-evaluating whether this product aligns with the overall goals of the company. Memos fly, heads roll, policies change, and things are, overall, pretty grim. Finally, by March, after far too many sixty-five hour weeks, a very shaky version of the software is ready. In the field, bug-discovery rates are high, and the technical support staff are at their wits' end, trying to cope with the complaints and demands of the irate customers. Nobody is happy.   In April, BB decides to buy his way out of the problem by licensing a product produced by Rupert Industries and redistributing it. The customers are mollified, the marketing folks are smug, and you are laid off.     Rupert Industries: Project Alpha   Your name is Robert. The date is January 3, 2001. The quiet hours spent with your family this holiday have left you refreshed and ready for work. You are sitting in a conference room with your team of professionals. The manager of the division called the meeting. "We have some ideas for a new project," says the division manager. Call him Russ. He is a high-strung British chap with more energy than a fusion reactor. He is ambitious and driven but understands the value of a team. Russ describes the essence of the new market opportunity the company has identified and introduces you to Jane, the marketing manager, who is responsible for defining the products that will address it. Addressing you, Jane says, "We'd like to start defining our first product offering as soon as possible. When can you and your team meet with me?" You reply, "We'll be done with the current iteration of our project this Friday. We can spare a few hours for you between now and then. After that, we'll take a few people from the team and dedicate them to you. We'll begin hiring their replacements and the new people for your team immediately." "Great," says Russ, "but I want you to understand that it is critical that we have something to exhibit at the trade show coming up this July. If we can't be there with something significant, we'll lose the opportunity."   "I understand," you reply. "I don't yet know what it is that you have in mind, but I'm sure we can have something by July. I just can't tell you what that something will be right now. In any case, you and Jane are going to have complete control over what we developers do, so you can rest assured that by July, you'll have the most important things that can be accomplished in that time ready to exhibit."   Russ nods in satisfaction. He knows how this works. Your team has always kept him advised and allowed him to steer their development. He has the utmost confidence that your team will work on the most important things first and will produce a high-quality product.   * * *   "So, Robert," says Jane at their first meeting, "How does your team feel about being split up?" "We'll miss working with each other," you answer, "but some of us were getting pretty tired of that last project and are looking forward to a change. So, what are you people cooking up?" Jane beams. "You know how much trouble our customers currently have . . ." And she spends a half hour or so describing the problem and possible solution. "OK, wait a second" you respond. "I need to be clear about this." And so you and Jane talk about how this system might work. Some of her ideas aren't fully formed. You suggest possible solutions. She likes some of them. You continue discussing.   During the discussion, as each new topic is addressed, Jane writes user story cards. Each card represents something that the new system has to do. The cards accumulate on the table and are spread out in front of you. Both you and Jane point at them, pick them up, and make notes on them as you discuss the stories. The cards are powerful mnemonic devices that you can use to represent complex ideas that are barely formed.   At the end of the meeting, you say, "OK, I've got a general idea of what you want. I'm going to talk to the team about it. I imagine they'll want to run some experiments with various database structures and presentation formats. Next time we meet, it'll be as a group, and we'll start identifying the most important features of the system."   A week later, your nascent team meets with Jane. They spread the existing user story cards out on the table and begin to get into some of the details of the system. The meeting is very dynamic. Jane presents the stories in the order of their importance. There is much discussion about each one. The developers are concerned about keeping the stories small enough to estimate and test. So they continually ask Jane to split one story into several smaller stories. Jane is concerned that each story have a clear business value and priority, so as she splits them, she makes sure that this stays true.   The stories accumulate on the table. Jane writes them, but the developers make notes on them as needed. Nobody tries to capture everything that is said; the cards are not meant to capture everything but are simply reminders of the conversation.   As the developers become more comfortable with the stories, they begin writing estimates on them. These estimates are crude and budgetary, but they give Jane an idea of what the story will cost.   At the end of the meeting, it is clear that many more stories could be discussed. It is also clear that the most important stories have been addressed and that they represent several months worth of work. Jane closes the meeting by taking the cards with her and promising to have a proposal for the first release in the morning.   * * *   The next morning, you reconvene the meeting. Jane chooses five cards and places them on the table. "According to your estimates, these cards represent about one perfect team-week's worth of work. The last iteration of the previous project managed to get one perfect team-week done in 3 real weeks. If we can get these five stories done in 3 weeks, we'll be able to demonstrate them to Russ. That will make him feel very comfortable about our progress." Jane is pushing it. The sheepish look on her face lets you know that she knows it too. You reply, "Jane, this is a new team, working on a new project. It's a bit presumptuous to expect that our velocity will be the same as the previous team's. However, I met with the team yesterday afternoon, and we all agreed that our initial velocity should, in fact, be set to one perfectweek for every 3 real-weeks. So you've lucked out on this one." "Just remember," you continue, "that the story estimates and the story velocity are very tentative at this point. We'll learn more when we plan the iteration and even more when we implement it."   Jane looks over her glasses at you as if to say "Who's the boss around here, anyway?" and then smiles and says, "Yeah, don't worry. I know the drill by now."Jane then puts 15 more cards on the table. She says, "If we can get all these cards done by the end of March, we can turn the system over to our beta test customers. And we'll get good feedback from them."   You reply, "OK, so we've got our first iteration defined, and we have the stories for the next three iterations after that. These four iterations will make our first release."   "So," says Jane, can you really do these five stories in the next 3 weeks?" "I don't know for sure, Jane," you reply. "Let's break them down into tasks and see what we get."   So Jane, you, and your team spend the next several hours taking each of the five stories that Jane chose for the first iteration and breaking them down into small tasks. The developers quickly realize that some of the tasks can be shared between stories and that other tasks have commonalities that can probably be taken advantage of. It is clear that potential designs are popping into the developers' heads. From time to time, they form little discussion knots and scribble UML diagrams on some cards.   Soon, the whiteboard is filled with the tasks that, once completed, will implement the five stories for this iteration. You start the sign-up process by saying, "OK, let's sign up for these tasks." "I'll take the initial database generation." Says Pete. "That's what I did on the last project, and this doesn't look very different. I estimate it at two of my perfect workdays." "OK, well, then, I'll take the login screen," says Joe. "Aw, darn," says Elaine, the junior member of the team, "I've never done a GUI, and kinda wanted to try that one."   "Ah, the impatience of youth," Joe says sagely, with a wink in your direction. "You can assist me with it, young Jedi." To Jane: "I think it'll take me about three of my perfect workdays."   One by one, the developers sign up for tasks and estimate them in terms of their own perfect workdays. Both you and Jane know that it is best to let the developers volunteer for tasks than to assign the tasks to them. You also know full well that you daren't challenge any of the developers' estimates. You know these people, and you trust them. You know that they are going to do the very best they can.   The developers know that they can't sign up for more perfect workdays than they finished in the last iteration they worked on. Once each developer has filled his or her schedule for the iteration, they stop signing up for tasks.   Eventually, all the developers have stopped signing up for tasks. But, of course, tasks are still left on the board.   "I was worried that that might happen," you say, "OK, there's only one thing to do, Jane. We've got too much to do in this iteration. What stories or tasks can we remove?" Jane sighs. She knows that this is the only option. Working overtime at the beginning of a project is insane, and projects where she's tried it have not fared well.   So Jane starts to remove the least-important functionality. "Well, we really don't need the login screen just yet. We can simply start the system in the logged-in state." "Rats!" cries Elaine. "I really wanted to do that." "Patience, grasshopper." says Joe. "Those who wait for the bees to leave the hive will not have lips too swollen to relish the honey." Elaine looks confused. Everyone looks confused. "So . . .," Jane continues, "I think we can also do away with . . ." And so, bit by bit, the list of tasks shrinks. Developers who lose a task sign up for one of the remaining ones.   The negotiation is not painless. Several times, Jane exhibits obvious frustration and impatience. Once, when tensions are especially high, Elaine volunteers, "I'll work extra hard to make up some of the missing time." You are about to correct her when, fortunately, Joe looks her in the eye and says, "When once you proceed down the dark path, forever will it dominate your destiny."   In the end, an iteration acceptable to Jane is reached. It's not what Jane wanted. Indeed, it is significantly less. But it's something the team feels that can be achieved in the next 3 weeks.   And, after all, it still addresses the most important things that Jane wanted in the iteration. "So, Jane," you say when things had quieted down a bit, "when can we expect acceptance tests from you?" Jane sighs. This is the other side of the coin. For every story the development team implements,   Jane must supply a suite of acceptance tests that prove that it works. And the team needs these long before the end of the iteration, since they will certainly point out differences in the way Jane and the developers imagine the system's behaviour.   "I'll get you some example test scripts today," Jane promises. "I'll add to them every day after that. You'll have the entire suite by the middle of the iteration."   * * *   The iteration begins on Monday morning with a flurry of Class, Responsibilities, Collaborators sessions. By midmorning, all the developers have assembled into pairs and are rapidly coding away. "And now, my young apprentice," Joe says to Elaine, "you shall learn the mysteries of test-first design!"   "Wow, that sounds pretty rad," Elaine replies. "How do you do it?" Joe beams. It's clear that he has been anticipating this moment. "OK, what does the code do right now?" "Huh?" replied Elaine, "It doesn't do anything at all; there is no code."   "So, consider our task; can you think of something the code should do?" "Sure," Elaine said with youthful assurance, "First, it should connect to the database." "And thereupon, what must needs be required to connecteth the database?" "You sure talk weird," laughed Elaine. "I think we'd have to get the database object from some registry and call the Connect() method. "Ah, astute young wizard. Thou perceives correctly that we requireth an object within which we can cacheth the database object." "Is 'cacheth' really a word?" "It is when I say it! So, what test can we write that we know the database registry should pass?" Elaine sighs. She knows she'll just have to play along. "We should be able to create a database object and pass it to the registry in a Store() method. And then we should be able to pull it out of the registry with a Get() method and make sure it's the same object." "Oh, well said, my prepubescent sprite!" "Hay!" "So, now, let's write a test function that proves your case." "But shouldn't we write the database object and registry object first?" "Ah, you've much to learn, my young impatient one. Just write the test first." "But it won't even compile!" "Are you sure? What if it did?" "Uh . . ." "Just write the test, Elaine. Trust me." And so Joe, Elaine, and all the other developers began to code their tasks, one test case at a time. The room in which they worked was abuzz with the conversations between the pairs. The murmur was punctuated by an occasional high five when a pair managed to finish a task or a difficult test case.   As development proceeded, the developers changed partners once or twice a day. Each developer got to see what all the others were doing, and so knowledge of the code spread generally throughout the team.   Whenever a pair finished something significant whether a whole task or simply an important part of a task they integrated what they had with the rest of the system. Thus, the code base grew daily, and integration difficulties were minimized.   The developers communicated with Jane on a daily basis. They'd go to her whenever they had a question about the functionality of the system or the interpretation of an acceptance test case.   Jane, good as her word, supplied the team with a steady stream of acceptance test scripts. The team read these carefully and thereby gained a much better understanding of what Jane expected the system to do. By the beginning of the second week, there was enough functionality to demonstrate to Jane. She watched eagerly as the demonstration passed test case after test case. "This is really cool," Jane said as the demonstration finally ended. "But this doesn't seem like one-third of the tasks. Is your velocity slower than anticipated?"   You grimace. You'd been waiting for a good time to mention this to Jane but now she was forcing the issue. "Yes, unfortunately, we are going more slowly than we had expected. The new application server we are using is turning out to be a pain to configure. Also, it takes forever to reboot, and we have to reboot it whenever we make even the slightest change to its configuration."   Jane eyes you with suspicion. The stress of last Monday's negotiations had still not entirely dissipated. She says, "And what does this mean to our schedule? We can't slip it again, we just can't. Russ will have a fit! He'll haul us all into the woodshed and ream us some new ones."   You look Jane right in the eyes. There's no pleasant way to give someone news like this. So you just blurt out, "Look, if things keep going like they're going, we're not going to be done with everything by next Friday. Now it's possible that we'll figure out a way to go faster. But, frankly, I wouldn't depend on that. You should start thinking about one or two tasks that could be removed from the iteration without ruining the demonstration for Russ. Come hell or high water, we are going to give that demonstration on Friday, and I don't think you want us to choose which tasks to omit."   "Aw forchrisakes!" Jane barely manages to stifle yelling that last word as she stalks away, shaking her head. Not for the first time, you say to yourself, "Nobody ever promised me project management would be easy." You are pretty sure it won't be the last time, either.   Actually, things went a bit better than you had hoped. The team did, in fact, have to drop one task from the iteration, but Jane had chosen wisely, and the demonstration for Russ went without a hitch. Russ was not impressed with the progress, but neither was he dismayed. He simply said, "This is pretty good. But remember, we have to be able to demonstrate this system at the trade show in July, and at this rate, it doesn't look like you'll have all that much to show." Jane, whose attitude had improved dramatically with the completion of the iteration, responded to Russ by saying, "Russ, this team is working hard, and well. When July comes around, I am confident that we'll have something significant to demonstrate. It won't be everything, and some of it may be smoke and mirrors, but we'll have something."   Painful though the last iteration was, it had calibrated your velocity numbers. The next iteration went much better. Not because your team got more done than in the last iteration but simply because the team didn't have to remove any tasks or stories in the middle of the iteration.   By the start of the fourth iteration, a natural rhythm has been established. Jane, you, and the team know exactly what to expect from one another. The team is running hard, but the pace is sustainable. You are confident that the team can keep up this pace for a year or more.   The number of surprises in the schedule diminishes to near zero; however, the number of surprises in the requirements does not. Jane and Russ frequently look over the growing system and make recommendations or changes to the existing functionality. But all parties realize that these changes take time and must be scheduled. So the changes do not cause anyone's expectations to be violated. In March, there is a major demonstration of the system to the board of directors. The system is very limited and is not yet in a form good enough to take to the trade show, but progress is steady, and the board is reasonably impressed.   The second release goes even more smoothly than the first. By now, the team has figured out a way to automate Jane's acceptance test scripts. The team has also refactored the design of the system to the point that it is really easy to add new features and change old ones. The second release was done by the end of June and was taken to the trade show. It had less in it than Jane and Russ would have liked, but it did demonstrate the most important features of the system. Although customers at the trade show noticed that certain features were missing, they were very impressed overall. You, Russ, and Jane all returned from the trade show with smiles on your faces. You all felt as though this project was a winner.   Indeed, many months later, you are contacted by Rufus Inc. That company had been working on a system like this for its internal operations. Rufus has canceled the development of that system after a death-march project and is negotiating to license your technology for its environment.   Indeed, things are looking up!

    Read the article

  • AJI Report #19 | Scott K Davis and his son Tommy on Gamification and Programming for Kids

    - by Jeff Julian
    We are very excited about this show. John and Jeff sat down with Scott Davis and his son Tommy to talk about Gamification and Programming for Kids. Tommy is nine years old and the Iowa Code Camp was his second time presenting. Scott and Tommy introduce a package called Scratch that was developed by MIT to teach kids about logic and interacting with programming using sprites. Tommy's favorite experience with programming right now is Lego Mindstorms because of the interaction with the Legos and the development. Most adults when they get started with development also got started with interacting more with the physical machines. The next generation is given amazing tools, but the tools tend to be sealed and the physical interaction is not there. With some of these alternative hobby platforms like Legos, Arduino, and .NET Micro Framework, kids can write some amazing application and see their code work with physical movement and interaction with devices and sensors. In the second half of this podcast, Scott talks about how companies can us Gamification to prompt employees to interact with software and processes in the organization. We see gamification throughout the consumer space and you need to do is open up the majority of the apps on our phones or tablets and there is some interaction point to give the user a reward for using the tool. Scott gets into his product Qonqr which is described as the board game Risk and Foursquare together. Scott gets into the different mindsets of gamers (Bartle Index) and how you can use these mindsets to get the most out of your team through gamification techniques. Listen to the Show Site: http://scottkdavis.com/ Twitter: @ScottKDavis LinkedIn: ScottKDavis Scratch: http://scratch.mit.edu/ Lego Mindstorms: http://mindstorms.lego.com/ Bartle Test: Wikipedia Gamification: Wikipedia

    Read the article

  • That’s a wrap! Almost, there’s still one last chance to attend a SQL in the City event in 2012

    - by Red and the Community
    The communities team are back from the SQL in the City multi-city US Tour and we are delighted to have met so many happy SQL Server professionals and Red Gate customers. We set out to run a series of back-to-back events in order to meet, talk to and delight as many SQL Server and Red Gate enthusiasts as possible in 5 different cities in 11 days. We did it! The attendees had a good time too and 99% of them would attend another SQL in the City event in 2013 – so it seems we left an impression. There were a range of topics on the event agenda, ranging from ‘The Whys & Hows of Continuous Integration’, ‘Database Maintenance Essentials’, ‘Red Gate tools – The Complete Lifecycle’, ‘Automated Deployment: Application And Database Releases Without The Headache’, ‘The Ten Commandments of SQL Server Monitoring’ and many more. Videos and slides from the events will be posted to the event website in November, after our last event of 2012. SQL in the City Seattle – November 5 Join us for free and hear from some of the very best names in the SQL Server world. SQL Server MVPs such as; Steve Jones, Grant Fritchey, Brent Ozar, Gail Shaw and more will be presenting at the Bell Harbor conference center for one day only. We’re even taking on board some of the recent attendee-suggestions of how we can improve the events (feedback from the 65% of attendees who came to our US tour events), first off we’re extending the drinks celebration in the evening! Rather than just a 30 minute drink and run, attendees will have up to 2 hours to enjoy free drinks, relax and network in a fantastic environment amongst some really smart like-minded professionals. If you’re interested in expanding your SQL Server knowledge, would like to learn more about Red Gate tools, get yourself registered for the last SQL in the City event of 2012. It’s free, fun and we’re very friendly! I look forward to seeing you in Seattle on Monday November 5. Cheers, Annabel.

    Read the article

  • CodePlex Daily Summary for Thursday, February 18, 2010

    CodePlex Daily Summary for Thursday, February 18, 2010New ProjectsASP .NET MVC CMS (Content Management System): Open source Content management system based on ASP.NET MVC platform.AutoFolders: AutoFolders package for Umbraco CMS This package auto creates folder structures for new and existing pages. The folders structures can be date bas...AutoPex: This project combines CCI with Pex by allowing the developer to run Pex on methods based on differences between two assemblies. Canvas VSDOC Intellisense: JavaScript VSDOC documentation for HTML5 Canvas element and 2d Context interface.CSUDH: California State University, Domguiez Hills Game projectsD-AMPS: System for Analysis of Microelectronic and Photonic StructuresDispX: Disease PredictorEmployee Info Starter Kit: This is a starter kit, which includes very simple user requirements, where we can create, read, update and delete (crud) the employee info of a com...Enhanced Discussion Board for SharePoint: Provide later... publishing project to share with Malaysians firstFlowPad: Flowpad is a light, fast and easy to use flow diagram editor. It helps you quickly pour your algorithms from your mind to 'paper'. It is written us...Henge3D Physics Library for XNA: Henge3D is a 3D physics library written in C# for XNA. It is implemented entirely in managed code and is compatible with the XBOX 360.Hybrid Windows Service: Abstracted design pattern for running a windows service interactively. Implemented as a base class to replace ServiceBase it will automatically pro...Image Cropper datatype for Umbraco: Stand alone version of the Image Cropper datatype in Umbraco. Listinator: A social wishlist application done in asp.net MVCMicrosoft Dynamics Ax User Group (AXUG) Code Repository: The goal of this project is to make it easier for customers of Microsoft Dynamics Ax to be able to share relevant source code. Code base should inc...Mobil Trials: Sebuah game sederhana yang dibuat di atas Silverlight 3.0 dengan bantuan Physics Helper 3.0 Demo : http://gameagam.co.cc/default.html Mirror link...NavigateTo Providers: This project is a collection of NavigateTo providers for Visual Studio 2010. NExtLib: NExtLib is a general-purpose extension library for .NET, which adds some useful features and addresses some alleged omissions.Nom - .NET object-mapper: Nom is a light-weight, storage-type agnostic persistence framework which is intended to provide an abstraction over both relational and non-relatio...Numerical Methods on Silverlight: Numerical Methods, Silverlight, Math Parser, Simple, EulerOpenGLViewController for Visual Basic .NET 2008: A single class in pure VB.NET code to create and control an OpenGL window by calling opengl32.dll directly without use of additional wrapper librar...RestaurantMIS: RestaurantMIS is a simple Restaurant management system developed in Visual C# 2008 with Chinese language.SmartKonnect: <project name>A WPF application for windows with shoutcast, twitter, facebook and etc.SSRS Excel file Sheet rename: SSRS wont support renaming excel reports sheet rename. This program support to generate the report and change the excel sheet nameSWENTRIZ.NET: SWENTRIZ.NET allows to build graphics of implicit functions via .NET functionality.TFT: Tropical forecast tracker is a web application. It will measure the error of the National Hurricane Center's forecast as compared to the actual tr...WCF Dynamic Client Proxy: A WCF Dynamic Client Proxy so you don't have to inherit from ClientBase all the time. The proxy also has fault tolerance so you don't have to dispo...Web.Config Role Provider: Stores ASP.NET Roles in web.config. Easy to set up and deploy. Works great for simple websites with authentication. The projects includes support ...WPF Line of Business App: Example WPF patterns for line of business applications. Includes navigation, animation, and visualization.YuBiS Framework: Silverlight and WF based a workflow RAD framework. New ReleasesASP .NET MVC CMS (Content Management System): AtomicCms 1.0: This is the first public release of AtomicCms. To get more information about this content management system, visit website http://atomiccms.com/Blogsprajeesh.Blogspot samples: Designing Modular Smart Clients using CAL: This whitepaper provides architectural guidance for designing and implementing enterprise WPF/ silverlight client applications based on the Composi...DB Ghost Build Tools: 1.0.2: Made a change to the datetime format per dewee.DotNetNuke® Community Edition: 05.02.03: Major HighlightsFixed the issue where LinkClick.aspx links were incorrect for child portals Fixed the issue with the PayPal URL settings. Fixed...Employee Directory webpart for sharepoint 2007 user profiles: Employee Directory Source V2.0: Features: 1. Displays a complete list of all Active Directory profiles imported by the SSP into SharePoint 2007. 2. Displays the following fields ...Enhanced Discussion Board for SharePoint: Alpha Release: Meant for those who attended my presentation. Not cleaned upESPEHA: Espeha 9 PFR: Some small issues fixedFlowPad: FlowPad 0.1: FlowPad 0.1 build. Run it to get fammiliar with major concepts of easy diagramming :)Fluent Ribbon Control Suite: Fluent Ribbon Control Suite BETA2: Fluent Ribbon Control Suite BETA2 Includes: - Fluent.dll (with .pdb and .xml) - Demo Application - Samples - Foundation (Tabs, Groups, Contextu...Henge3D Physics Library for XNA: Henge3D Source (2010-02): This is the initial 2010-02 release.Highlight: Highlight 2.5: This release is primarily a maintenance release of the library and is functionally equivalent to version 2.3 that was released in 2004.Magiq: Magiq 0.3.0: Magiq 0.3.0 contains: Magiq-to-objects: Full support to Linq-to-objects Magiq-to-sql: Full support to Linq-to-sql New features: Plugin model Bu...Microsoft Points Converter: Pre-Alpha ClickOnce Installer v0.03: This release builds on the 0.02 release by adding more thorough validation checks for the amount to convert from as well as adding several currency...Mobil Trials: Mobil Trials Source Code: Sebuah game sederhana yang dibuat di atas Silverlight 3.0 dengan bantuan Physics Helper 3.0 Game ini masih perlu dikembangkan lebih jauh lagi! Si...Numerical Methods on Silverlight: Numerical Methods on Silverlight 1.00: This a new version of Numerical Methods on Silverlight.OAuthLib: OAuthLib (1.5.0.0): Changed point is as next. 7037 Fix spell miss of RequestFactoryMedthodSharePoint Outlook Connector: Version 1.0.1.0: Now it supports simply attaching SharePoint documents feature.Sharpy: Sharpy 1.1 Alpha: This is the second Sharpy release. Only a single change has been made - the foreach function now uses IEnumerable as a source instead of IList. Th...SkinDroidCreator: SkinDroidCreator ALPHA 1: Primera releaseTan solo carga mapas, ya sea de un zip o de un directorio. Para probarlo se pueden cargar temas Metamorph o temas flasheables, ya se...SkyDrive .Net API Client: SkyDrive .Net API Client 0.8.9: SkyDrive .Net API Client assembly version 0.8.9. Changes/improvements: - Added Web Proxy support - Introduced WebDriveInfo - Introduced DownloadUrl...spikes: Salient.Web.Administration 1.0: WebAdmin is simply the built in ASP.NetWebAdministrationFiles application cleaned up with codebehinds to make customization and refactoring possibl...SSRS Excel file Sheet rename: Change SSRS excel file sheet name: Create stored procedure from the attached file in sql server 2005/2008SWENTRIZ.NET: Approach 1: First approachTortoiseSVN Addin for Visual Studio: TortoiseSVN Addin 1.0.4: Visual Studio 2005 support Custom working root bug fixingTotal Commander SkyDrive File System Plugin (.wfx): Total Commander SkyDrive File System Plugin 0.8.4: Total Commander SkyDrive File System Plugin version 0.8.4. Bug fixes: - Upgraded SkyDriveWebClient to version 0.8.9 Please do not forget to expres...UnOfficial AW Wrapper dot Net: UAWW.Net 0.1.5.85 Béta 2: Fixed and Added SomethingVr30 OS: Space Brick Break 1.1: A brick breaker. ADD Level 3, 4, 5Web.Config Role Provider: First release: Three downloads are available: A compiled dll ready to use. The schema to enable intellisense The complete source (zipped)WI Assistant: WI Assistant 2.1: This release improves the work item selection functionality. These selection methods are now supported (some require at least one item selected): ...WI Assistant: WI Assistant 2.2: Improved error handling and fix for linking several times in a row. DISCLAIMER: While I have tested this app on my TFS Server, by downloading and...ZipStorer - A Pure C# Class to Store Files in Zip: ZipStorer 2.30: Added stream-oriented methods Improved support for ePUB & Open Container Format specification (OCF) Automatic switch from Deflate to Store algo...Most Popular ProjectsRawrDotNetNuke® Community EditionASP.NET Ajax LibraryFacebook Developer ToolkitWindows 7 USB/DVD Download ToolWSPBuilder (SharePoint WSP tool)Virtual Router - Wifi Hot Spot for Windows 7 / 2008 R2Json.NETPerformance Analysis of Logs (PAL) ToolQuickGraph, Graph Data Structures And Algorithms for .NetMost Active ProjectsDinnerNow.netRawrSharpyBlogEngine.NETSimple SavantjQuery Library for SharePoint Web ServicesNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices – Enterprise LibraryPHPExcelFacebook Developer Toolkit

    Read the article

  • SQLAuthority News – Best Complements – DBA Survivor: Become a Rock Star DBA

    - by pinaldave
    Today’s blog post is about the biggest complement I have ever received. I am very very happy and would like to share my feelings with you. Thomas Larock (Blog | Twitter) (known as SQLRockstar) keeps the excellent ranking of the blogger in SQL Server Arena. I am big fan of this list and have been referring lots of people. I was in the msdb database since the very first day of the ranking. Two days ago, I noticed that I am promoted to Model Database. I often receive complements about my blog but this is the biggest complement I have ever received. I have taken the snapshot of the same and listed here. Thomas is a SQL Server MVP and Board of Directors for the Professional Association for SQL Server. He is the author of DBA Survivor: Become a Rock Star DBA. The book is designed to give a junior to mid-level DBA a better understanding of what skills are needed in order to survive (and thrive) in their career. This book is currently not available in India, I am waiting for someone traveling from USA to bring the copy for me. I am very eager to read the book and promise to share the book review with all of you once I am done reading. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, SQLServer, T SQL, Technology

    Read the article

  • So long and thanks for the fish&hellip;

    - by Geoff N. Hiten
    This marks my last post as a SQLPASS Board member.  I learned a lot during my year of service and I thank everyone involved for this opportunity.  I would especially like to thank the Chapter leaders and Regional Mentors for Virtual Chapters who (mostly) patiently taught me about Virtual Chapters.   I hope the changes I put in place will help strengthen and grow VCs and PASS going forward.  I would also like to thank every one who encouraged me to reach beyond my comfort zone and accept a leadership position within the PASS organization.  My overall principle was to be a good steward of the PASS community.  Could I have done more?  Always. Did I do enough?  I hope so.  But PASS is a volunteer organization and my time, like yours, is limited.  I have other obligations in life that supersede PASS.  Now I have more time for some of those.  I won’t be going away or leaving the SQL Community.  I will still contribute to the community and support PASS, just in a different role.  Time to let somebody else enjoy the hot seat for a while. Finally, everyone who voted (not just for me) deserves a thanks.  More voters and more engaged voters, strong candidates, and a vigorous debate were all I wanted out of declaring as a candidate last year. This year the SQL community got exactly that. Thank you..

    Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >