Search Results

Search found 2123 results on 85 pages for 'crossover cable'.

Page 45/85 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

  • Dell Vostro 1510 can't connect to wireless--how can I fix this?

    - by Miss Spider
    I'm having some trouble with my Dell Vostro 1510. I installed wubi on it two days ago and I've only been able to use the Internet with an ethernet cable. The network seems to definitely recognize that the wireless--even other peoples' wireless--is there, but it can't manage to get on. I'll post the lpsci here, so that you can see the Broadcom card I'm working with. I have downloaded the kernel 2.6.39-0-generic, which doesn't appear to have done a lick of work. 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

    Read the article

  • How do I output my audio input?

    - by VarLogRant
    A few iterations ago, I think this was Jaunty but could've been before, I would plug a 1/8" audio cable from the line-out of a Windows netbook to the line-in of my Ubuntu machine, so I would have all the sound from both machines without having to plug both into a mixer which I don't have. I didn't do this much, as I was pretty-much happy with Banshee at the time. But with Karmic, and still with Lucid, I can only get the output if I'm recording with Audacity. Which I'm not going to do from my web-development and systems programming workstation. I can tell by plugging in headphones that my netbook has audio out working. I can see Sound Preferences that the Ubuntu machine is receiving them. I just want the old behavior back. Help?

    Read the article

  • Ubuntu 12.04 on Vm Player showing Wired Network Instead of Wireless Network

    - by Fak365
    I am new to Ubuntu, recently I installed ubuntu 12.04 in Vm Player (Virtual Machine) on my Dell laptop having windows 7 ultimate 32 bit for just to check the security of my wireless network and want to crack the WiFi (WPA-PSK) password but in ubuntu it does not show the wireless network it shows the 2 arrow sign as i have not connect the ethernet cable to my laptop and connected through WiFi on my main OS (windows 7) but it shows the wired network and internet is working but it does not show wifi connection. On windows 7 WiFi is connected and showing the WiFi connection and working correctly.But my main motive is to crack the WiFi password as it can't detect WiFi network so what to do? Please Help.!!thanks My Laptop Specification : Laptop : Dell Latitude D620 OS : Windows 7 Ultimate 32 bit Processor : Core Duo 2 T7200 @ 2Ghz Ram : 2 GB WiFi card : Intel Pro/Wireless 3945 ABG Virtual Machine : Vm Player V 5.0.1 If Need to Install Drivers Please Give Me Full Information how to install and which driver I should install. Thanks In Advance.

    Read the article

  • Can't boot - "Waiting for Network Configuration"

    - by user213017
    After an update on 13.10, my PC won't boot Ubuntu any longer. It displays the infamous "Waiting for Network Configuration" message and then hangs. I can go into recovery mode, and choose "Start networking" and then go to a root prompt, and that works fine. Ping works. /etc/network/interfaces contains just the two lines "auto lo" and "iface lo inet loopback". I've double-checked that my network is working, the cable is working (it works on another PC) and the network card seems to indicate a connection. Any suggestions on how to get my PC booted again? Right now I'm limited to a root shell prompt.

    Read the article

  • Nexus S 4g not detected by computer

    - by Newbie in over his head
    A little bit of a disclaimer, I have very little knowledge of the correct terminology for some of the things I'm going to ask about, and I apologize in advance I have a Nexus S 4g phone that is, at the moment of writing, connected to my 11.10 computer through its USB charger cable. In the past, connecting the phone like this has allowed me to transfer files between my computer and my phone; I'm able to get my music onto my phone, and my photos onto my computer, for example. For some reason, this has stopped working. My phone still charges its battery when connected to the computer, but neither the computer nor the phone recognized that they are connected. Is there something I can do to get the phone and the computer to detect each other? I don't know how to fix this, and it's more than a little frustrating. Any help would be greatly appreciated.

    Read the article

  • How can I get my printer working after upgrading to (K)ubuntu 13.10?

    - by Sparhawk
    When using (K)ubuntu 13.04, my network printer worked fine. After upgrading to (K)ubuntu 13.10 today, I can no longer print. I get the error "The printer is not responding." I've tried to add the printer again, and it is automatically recognised. I can add it, and select it from print dialogue boxes, but I get the same error. Brother HL-2040, Kubuntu 13.10 (KDE 4.11.2) ==EDIT== I attempted connecting the printer directly with a USB cable, and this worked fine, so it's not a problem with drivers. (FWIW I'm using the recommended HL-2040 Foomatic/hl1250.) Further, it prints fine over the network from my wife's MacBook.

    Read the article

  • Problems booting Ubuntu 10.10 with Nvdia GeForce 6600gt

    - by SlyrNemesis
    I am quite new to Ubuntu and I already stumbled upon a problem. I run Ubuntu 10.10 Maverick Meerkat now and Install went fine, when trying to boot the screen popped black and I faced this message "gpu lockup - switching to software fbcon." When setting the display to onboard VGA through BIOS Ubuntu has no problem at all, but when I switch back to my AGP card (which is a Nvidia GeForce 6600GT) I get that message again. I do not use VGA for that card I use my DVI cable for it. Does anyone have an answer for me to make this work? Thank you

    Read the article

  • My Computer in Ubuntu?

    - by Casey Hungler
    I was wondering if Ubuntu has an equivalent to the Windows feature "My Computer", which lists all available drives/storage devices. Typically, My Computer shows C:, which can be opened to view all of your directories and files. At this point, it is very similar to Ubuntu's Home Folder, but I am looking for something that allows me to view/select all available HDD's/Partitions. Here's my reason: I found a 6gb IDE HDD in my basement, and got an IDE cable for it. My desktop computer has a SATA drive in it, but has an IDE slot, so I wanted to plug it in and see what might be on it. The drive seems to be recognized in BIOS, but I can't find it in Ubuntu to view files, and Ubuntu is the only OS on that particular computer. If anyone has any ideas as to how to view the contents of that drive WITHOUT formatting it or tampering with the contents in any way, I would greatly appreciate your help. Thanks in advance!

    Read the article

  • ubuntu 12.04 sound not working in applications

    - by user109887
    I run Ubuntu on a DELL Vostro 3500 laptop. Everything was working perfectly since this morning, after an update... I can't play any multimedia sound anymore, that includes youtube and others, mp3 in Rythmbox, sound of video in VLC. I can see my device in the setting window and I can play tests sound, but nothing else. Any idea? EDIT: I'm switching very often from to HDMI output, which is deconnected right now. I've tried running VLC, and in the audio menu, you can choose the output so now I can listen to music via VLC but not with other programs. Looks like ubuntu is not totally switching the audio device after unplugging the HDMI cable. Is there any command line which can do so?

    Read the article

  • No video signal after install

    - by tW4r
    Today I tried to install Ubuntu 12.10 to my machine, but all the time I encountered the same problem, I successfully boot from Ubuntu 12.04 DVD, and a purple background comes up with accessibility and keyboard icons at the bottom of the screen, then when you wait a while a monitor text comes up "No signal" (Keep in mind that this signal is only shown when there's cable in the monitor HDMI plug), and nothing happens, a little later disk drive stops flashing meaning that disk finished being read. Even if you reset the computer you still get no signal, you have to turn the power of and on again, and plug HDMI out and put it in again. My info: Graphics card: ATI/AMD Radeon HD 4850 Connection to monitor: HDMI Monitor: Samsung SyncMaster T220HD

    Read the article

  • Secondary display showing Ubuntu logo, but is not detected

    - by user72873
    I recently installed Ubuntu using WUBI, and it worked perfectly. However, my laptop is showing the main desktop screen, and my secondary display is only showing the Ubuntu logo with its loading bar underneath, nothing more. When I go to 'displays' it is only detecting my laptop screen, and not my Asus monitor (connected with a vga). Things I've done so far: Unplug and replug vga cable. Reboot computer. Re-install Ubuntu. Checked to see if any drivers needed to be installed. None were needed. I have a Thinkpad W520, with a Nvidia Quadro 1000M Thanks for the help!

    Read the article

  • Nvidia GTS 450 HDMI problem?

    - by Gercke
    Good afternoon friends. I have a problem with my video card, I have a video card GeForce GTS 450 and a TV Samsung Series 4 43 "and I have it connected to my video card via a cable Mini HDMI to the TV and everything works perfectly, I can instarlar Ubuntu 12.04 (64bits) perfectly, but the problem when I want to change the screen resolution but try to change the driver I install that comes directly from the Nvidia page gave me an error at the end. maximum resolution I presents is 1024x 768 and is supposed to introduce more resolutions and that is connected to the HDMI. A someone else has happened???? Will have some sort of solution???? I hope someone can help me and I thank you very much. Regards

    Read the article

  • How to access the SD card through my Sony Ericsson Xperia Arc Phone?

    - by user16364
    I have a Sony Ericsson Xperia Arc phone and I cannot access its SD card through the USB cable provided. I have set the USB connection mode to MSC yet when I connect the phone to my computer I cannot see the SD card (or anything for that matter). The Disk Utility however, does see an SEMC Mass Storage device but it says that no media was detected. I have validated that the SD card works as I removed it from the camera and plugged it into a card reader and saw all the photos and files stored on it. I have validated that the phone works as I have connected it (in MSC mode) to my wife's Windows 7 computer. Can anyone please tell me how I can access the SD card on my phone.

    Read the article

  • How to access the SD card through my Sony Ericsson Xperia Arc Phone?

    - by user16364
    I have a Sony Ericsson Xperia Arc phone and I cannot access its SD card through the USB cable provided. I have set the USB connection mode to MSC yet when I connect the phone to my computer I cannot see the SD card (or anything for that matter). The Disk Utility however, does see an SEMC Mass Storage device but it says that no media was detected. I have validated that the SD card works as I removed it from the camera and plugged it into a card reader and saw all the photos and files stored on it. I have validated that the phone works as I have connected it (in MSC mode) to my wife's Windows 7 computer. Can anyone please tell me how I can access the SD card on my phone.

    Read the article

  • Ubuntu Windows Installer - Firewall

    - by Max
    I installed Ubuntu with the Windows installer to use it along side. I could not find anything to activate a firewall so I thought its inbuilt and running. However now I read that I have to activate it manually? The command that was shown actually didnt promt any repsonse. Is it that the Windows installer version does not have that. Also my greatest concern is that I was without firewall protection for 2-3 weeks and I am using alot of public networks (university and dorm(only cable but still)). Thanks in advance.

    Read the article

  • Getting wifi working on 14.04

    - by user286114
    I have installed Ubuntu 14.04 on my laptop. When I plug in the ethernet cable the internet works fine, but I can't see any wireless network in the networking manager. The wifi switch is definitely on on my laptop! It's a Dell XPS M1330. I'm not sure what the network card is - how can I find out? nm-tool gives me this: NetworkManager Tool State: connected (global) - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: tg3 State: connected Default: yes HW Address: 00:23:AE:28:FE:A2 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.26 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.254 DNS: 192.168.1.254

    Read the article

  • Ubuntu will not install on my Dell Inspiron 580

    - by AndrewC
    I'm trying to install ubuntu on my Inspiron 580 (Intel Core i3 4Gb Ram Intel HD Graphics) but am having no success installing from CD or Windows installer all result in a purple rapidly flashing screen with the Ubuntu with 5 dots below it splash which doesn't change. I have tried releases 12.04.1 LTS (CD and windows installer), 11.10 (CD after reading it was certified for the 580) and today 12.10 (CD) all produce the same install failure. My Dell 1704PT monitor is connected to the intel HD board using an HDMI to DVI adaptor though I have tried a VGA cable and still got the same flashing screen. Any help gratefully received as i want to get away from Windows 7 Home Premium.

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • WiFi & GbE Slow while Both Active.

    - by Mark Tomlin
    I'm having a problem with my WiFi network connection when I use my wired GbE connection concurrently on my Laptop. I'm using my WiFi for Internet access, and general web surfing and I'm using my GbE connection to connect to my PlayStation so I can stream media. The WiFi connection is via a Linksys 610N connected to my Cable Modem. Where as the GbE connection is a direct connection from my Ethernet port to the Ethernet port of the PS3 via a Cat-5 cable (no router in between this connection). As soon as I connect the cable from the PS3 to my Ethernet port on my Laptop the WiFi connection slows to a halt, but then allows for a connection to the web as normal but at much slower speeds for the things like BitTorrent that stops completely. It seems to me that Windows can't handle both connections at once. It will have both active but it can only accept and send packets on one device at one time. I can get WiFi connections to work to go to websites and the like, but once I use my GbE connection to share media between my Laptop and my PS3 the Wifi connection dies out and I no longer have access to the internet. I setup my connection on the PS3 and the Laptop following the insturctions posted here: http://forums.finalgear.com/problems/s14e01-ps3-size-problem-40642/#post1188132 And the following is the results of my ipconfig. Windows IP Configuration Host Name . . . . . . . . . . . . : dygear Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter WiFi: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Connection Physical Address. . . . . . . . . : 00-19-**-**-**-** Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.111 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 167.206.254.2 167.206.254.1 Lease Obtained. . . . . . . . . . : Wednesday, May 19, 2010 08:55:30 Lease Expires . . . . . . . . . . : Thursday, May 20, 2010 08:55:30 Ethernet adapter LAN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet Physical Address. . . . . . . . . : 00-16-**-**-**-** Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.1.50 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Any ideas?

    Read the article

  • Android:How to display images from the in a ListView?

    - by Maxood
    Android:How to display images from the web in a ListView?I have the following code to display image from a URL in an ImageView: import java.io.IOException; import java.io.InputStream; import java.net.HttpURLConnection; import java.net.URL; import java.net.URLConnection; import android.app.ListActivity; import android.graphics.Bitmap; import android.graphics.BitmapFactory; import android.os.Bundle; import android.widget.ImageView; public class HttpImgDownload extends ListActivity { /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); Bitmap bitmap = // DownloadImage( // "http://www.streetcar.org/mim/cable/images/cable-01.jpg"); DownloadImage( "http://s.twimg.com/a/1258674567/images/default_profile_3_normal.png"); ImageView img = (ImageView) findViewById(R.id.img); img.setImageBitmap(bitmap); } private InputStream OpenHttpConnection(String urlString) throws IOException { InputStream in = null; int response = -1; URL url = new URL(urlString); URLConnection conn = url.openConnection(); if (!(conn instanceof HttpURLConnection)) throw new IOException("Not an HTTP connection"); try{ HttpURLConnection httpConn = (HttpURLConnection) conn; httpConn.setAllowUserInteraction(false); httpConn.setInstanceFollowRedirects(true); httpConn.setRequestMethod("GET"); httpConn.connect(); response = httpConn.getResponseCode(); if (response == HttpURLConnection.HTTP_OK) { in = httpConn.getInputStream(); } } catch (Exception ex) { throw new IOException("Error connecting"); } return in; } private Bitmap DownloadImage(String URL) { Bitmap bitmap = null; InputStream in = null; try { in = OpenHttpConnection(URL); bitmap = BitmapFactory.decodeStream(in); in.close(); } catch (IOException e1) { // TODO Auto-generated catch block e1.printStackTrace(); } return bitmap; } } Now how can i display images in an array in a listview? Here's how i want to display the images: http://sites.google.com/site/androideyecontact/_/rsrc/1238086823282/Home/android-eye-contact-lite/eye_contact-list_view_3.png?height=420&width=279

    Read the article

  • Widgets on Samsung Star/ Samsung Corby

    - by Rohit Desai
    Hi, I just created a new widget by following a tutorial. I created a zip containing all files and renamed it to HelloWorld.wgt instead of HelloWorld.zip. I sent it to my samsung star/corby via data cable, but when I try to open the wgt file on my phone it says it can't open it, because it doesn't know the filetype. Is there a way to install widgets on a Samsung Star without using a webserver? Thanks, Rohit desai

    Read the article

  • Can someone please help, I cant get this simple scolling feature

    - by localgamer
    I want to be able to have many button and objects in my project but they all wont fit on the screen at once so i would like the user to be able to scroll down and have more appear but i cant get it to work. I tried using ScrollView but it always throws me errors. Here is what I have so far. Please, any help would be great. <?xml version="1.0" encoding="utf-8"?> <AbsoluteLayout android:id="@+id/widget0" android:layout_width="fill_parent" android:layout_height="fill_parent" xmlns:android="http://schemas.android.com/apk/res/android" > <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="Hello World, tipcalc" /> <TextView android:id="@+id/widget28" android:layout_width="99px" android:layout_height="17px" android:text="Monthly Income" android:layout_x="40px" android:layout_y="32px" > </TextView> <TextView android:id="@+id/widget29" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Cable" android:layout_x="40px" android:layout_y="82px" > </TextView> <TextView android:id="@+id/widget30" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Internet" android:layout_x="40px" android:layout_y="132px" > </TextView> <TextView android:id="@+id/widget33" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Total To Pay" android:layout_x="40px" android:layout_y="302px" > </TextView> <Button android:id="@+id/btncalculate" android:layout_width="87px" android:layout_height="wrap_content" android:text="Calculate" android:layout_x="40px" android:layout_y="182px" > </Button> <Button android:id="@+id/btnreset" android:layout_width="86px" android:layout_height="wrap_content" android:text="Reset" android:layout_x="140px" android:layout_y="182px" > </Button> <EditText android:id="@+id/Monthly" android:layout_width="wrap_content" android:layout_height="35px" android:text="100" android:textSize="18sp" android:layout_x="200px" android:layout_y="22px" > </EditText> <EditText android:id="@+id/Internet" android:layout_width="51px" android:layout_height="36px" android:text="10" android:textSize="18sp" android:layout_x="200px" android:layout_y="72px" > </EditText> <EditText android:id="@+id/Cable" android:layout_width="wrap_content" android:layout_height="39px" android:text="1" android:textSize="18sp" android:layout_x="200px" android:layout_y="122px" > </EditText> <TextView android:id="@+id/txttotal" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="" android:layout_x="200px" android:layout_y="302px" > </TextView> </AbsoluteLayout>

    Read the article

  • USB Endpoint Stalled Error

    - by Harsha
    Hi All, I am getting "endpoint stalled error" in my CDC device. The usb stack is detecting the cable. The state is set as running but the errorcode is set as 0x11 which indicates 'USB_ENDPOINT_STALLED'. I verified and found that the endpoints has been assigned properly. What would be scenarios when "endpoint stalled error" would be reported? How to handle this? Please advise!

    Read the article

  • Can I make my Linksys WAG200G as an access point?

    - by Adnan Badar
    I have two routers one is dsl router (connected through my fone line) second is Linksys WAG200G, i want to use this router as an access point to increase the signal strength in my neighborhood can anyone please guide me step by step as i am not that good in networking i need to know both ways one by connecting a cable from the first router to the second and then make access point to the second one. second by connecting wireless from the first router to the second and then make access point to the second one. Thanks. Adnan

    Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >