Search Results

Search found 3237 results on 130 pages for 'david rodriguez dribeas'.

Page 45/130 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• VPN within a VM to allow for internet access on the host

  - by David Durrant

  I have a network connection (created under Networks and Sharing) that I use to connect to a customer's site. But when I use this to connect to the site, I loose all access to the public internet, and can only access customer specific items. I want to circumvent this issue by creating a VM and then utilizing the VM to connect to the network location and interact within the customer's domain, while leaving my host machine open to the internet. I'm not extremely familiar with networking, but I have a few basic skills. Please let me know if this is possible and what the correct procedures are. I already have a VM created with VirtualBox, and both the host and guest are running Windows 7 x64. I have created duplicate VPNs already, but can only connect successfully on the host machine.

  Read the article

• How to install PHPMyAdmin on Linux EC2 instance?

  - by David

  I just finished setting up a default Linux EC2 instance and would like to install PHPMyAdmin. I already have Apache and MySQL installed but cannot seem to install PHPMyAdmin. I tried using sudo apt-get phpmyadmin but the command apt-get is not recognized. I also tried sudo yum install phpmyadmin but that I get the message No package phpmyadmin available. Any suggestions on what I am doing wrong?

  Read the article

• Recommended IIS 7.5 books

  - by David McKenna

  Can somebody recommend good reading material for administrating IIS 7.5. Regards, DMcKenna

  Read the article

• How do I fix a corrupted copy of .Net Framework on Windows 7?

  - by David

  I receive the following error when trying to run applications that require .net Framework 3.5: "Could not load file or assembly 'System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The module was expected to contain an assembly manifest." I've tried numerous fixes, such as reinstalling through ad/remove software, copying the .net folder over from a clean windows 7 install, and running the .net cleanup tool. Just wondering if anyone has run into this issue before, or has an idea on how to fix it.

  Read the article

• What part of SMF is likely broken by a hard power down?

  - by David Mackintosh

  At one of my customer sites, the local guy shut down their local Solaris 10 x86 server, pulled the power inputs, moved it, and now it won’t start properly. It boots and then presents a prompt which lets you log in. This appears to be single user milestone (or equivalent). Digging into it, I think that SMF isn’t permitting the system to go multi-user. SMF was generating a ton of errors on autofs, after some fooling with it I got it to generate errors on inetd and nfs/client instead. This all tells me that the problem is in some SMF state file or database that needs to be fixed/deleted/recreated or something, but I don’t know what the actual issue is. By “generate errors”, I mean that every second I get a message on the console saying “Method or service exit timed out. Killing contract <#.” This makes interacting with the computer difficult. Running svcs –xv shows the service as “enabled”, in state “disabled”, reason “Start method is running”. Fooling with svcadm on the service does nothing, except confirm that the service is not in a Maintenance state. Logs in /lib/svc/log/$SERVICE just tell you that this loop has been happening once per second. Logs in /etc/svc/volatile/$SERVICE confirm that at boot the service is attempted to start, and immediately stopped, no further entries. Note that system-log isn’t starting because system-log depends on autofs so I have no syslog or dmesg. Googling all these terms ends up telling me how to debug/fix either autofs or nfs/client or inetd or rpc/gss (which was the dependency that SMF was using as an excuse to prevent nfs/client from “starting”, it was claiming that rpc/gss was “undefined” which is incorrect since this all used to work. I re-enabled it with inetadm, but inetd still won’t start properly). But I think that the problem is SMF in general, not the individual services. Doing a restore_repository to the “manifest_import” does nothing to improve, or even detectibly change, the situation. I didn’t use a boot backup because the last boot(s) were not useful. I have told the customer that since the valuable data directories are on a separate file system (which fsck’s as clean so it is intact) we could just re-install solaris 10 on the / partition. But that seems like an awfully windows-like solution to inflict on this problem. So. Any ideas what piece is broken and how I might fix it?

  Read the article

• SCP command Clarification

  - by david.colais

  I'm using the scp commands to pull some files from the remote server and one variation of the command is not working. I have 2 files names one.xml and two.xml in a remote server and I'm pulling these two files into the current dir using the following command: scp [email protected]:/student/class/Intermediate/one.xml . scp [email protected]:/student/class/Intermediate/two.xml . The above command works fine but if I use wildcards to pull all the xml files in a single shot as shown below it returns scp: No match. scp [email protected]:/student/class/Intermediate/*.xml . Why is it working if I pull the files individually and not working if I try to pull using wildcards.

  Read the article

• Why do partially failed/failing switches fail to pass DHCP?

  - by David Mackintosh

  I've noticed this several times: a switch starts to behave oddly. Usually if the switch doesn't fail outright, what tends to get noticed is that DHCP doesn't work. We had a Linksys SRW-224P fail today. Systems which were still connected worked properly, until it came time to renew their DHCP lease. Once the lease expired, they stopped working, but up until then we couldn't detect a failure. This includes PoE VoIP phones -- they work fine until their lease is up, at which point they're done. I've noticed this on the above-mentioned Linksys, three varieties of 3Com, and possibly half a dozen dumb switches. What is it about DHCP that makes it sensitive to failing switches?

  Read the article

• VoIP on Netgear DGN 2000 and Lynksys PAP2

  - by David Brown

  I have a VoIP service running perfectly for outgoing calls but I cannot receive incoming calls. I have a Netgear DGN 2000 modem router on 192.168.0.1 and a Lynksys Phone Adapter PAP2 on 192.168.0.2. I have created 3 new custom services: Service Table Service Name Ports tlenfon(TCP) 5060 tlenfon2(UDP) 15000 tlenfon3(UDP) 35000 I have reserved the address 192.168.0.2 for the PAP 2 I have forwarded the ports for each service to the PAP2 Service Name Action LAN Server IP address WAN Users Log tlenfon ALLOW always 192.168.0.2 Any Always tlenfon2 ALLOW always 192.168.0.2 Any Always tlenfon3 ALLOW always 192.168.0.2 Any Always I have checked the Default DMZ and specified 192.168.0.2 What have I missed?

  Read the article

• T61, NVidia, Ubuntu 9.10 == Video problems

  - by David Lazar

  Hi, Upgraded to latest Ubuntu, currently 9.10. Videos used to work fine. Now, playing videos using VLC or any other media player shows them 'sepia' tinged when playing. This is annoying. I remember this used to happen on occasion (after resuming from suspect), and I forget what I fiddled with to make it better. Does anyone have the method to force video to render correctly with this combination? It happens even after a reboot. Thanks

  Read the article

• Sharepoint Farm - more than one DataBase Server

  - by David Esteves

  Is it possible to have one MOSS Farm with two Database servers?

  Read the article

• Where's my Open-With gVim context menu option in Windows 7?

  - by David Mackintosh

  I have gVim installed. Under Vista and XP, this offered me an addition to either the object context menu of "Edit with gVim", or an addtion to the "Open With" context menu of "gVim". This would let me send arbitrary files to gVim for editing. Under Windows 7 64-bit, I have installed gVim -- twice, as it happens -- and there's no menu item. How do I add an option to send arbitrary files to gVim for viewing/editing?

  Read the article

• Trouble Connecting to Virtual Machine after IP address Change

  - by David

  I have a VMware image running a copy of Fedora 11 which is hosted on a remote server. The remote server recently had its IP address change. I'm now unable to connect to my virtual machine. The server admin assures me that my virtual machine is running and assigned the new IP address. I have checked the firewalls and had the remote admin restart the VM instance. Neither of these fixed the problem. How do I troubleshoot a remote server which I am unable to SSH to? I'm actually even unable to ping the remote IP (connection timed out).

  Read the article

• hosts.deny ignored by MacOSX 10.8

  - by David Holm

  I have been trying to set up my MacOS X Server, which I recently upgraded to Mountain Lion, to use denyhosts as I need to open port 22 to it. denyhosts is set up and adds entries to /etc/hosts.deny so I decided to add my laptops IP to it in order to verify that it actually works but I can still log in and my IP shows up in /private/var/log/system.log. I even rebooted the server once just to be sure there wasn't some service that had to be restarted. I tried the following entries: ALL: <my laptop's IP> sshd: <my laptop's IP> sshd: 127.0.0.1 My /etc/sshd_config has the following parameters set: UsePAM yes UseDNS no I Googled if deny.hosts has been deprecated in OSX 10.7 or 10.8 but I couldn't find any indications that it has. Any ideas of what is going wrong or if there is an alternative way to achieve the same result? Yes, a private key would solve this problem but for the time being I would like to stick to using password authentication. I also like the idea of denyhosts actually blocking access to all services running on the server and not just ssh.

  Read the article

• Node js server not responding outside localhost centos

  - by David Martinez

  I'm running a basic express server from CentOS but for some reason it is not responding outside of localhost, I have tried everything I have found on google but nothing works so far. This is my express server: app.listen(3000,"0.0.0.0"); If I do curl http://localhost:3000/ in the server it works fine. If I curl to the ip of the server it doesn't work. I already changed my iptables num target prot opt source destination 1 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 2 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 3 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3000 There is currently a apache server running on port 80 with no problems. I also tried setting a VirtualHost on apache but it didn't work either: <VirtualHost *:80> ServerName SubDOmain.MyDomain.com ProxyRequests off <Proxy *> Order allow,deny Allow from all </Proxy> ProxyPass / http://localhost:3000/ ProxyPassReverse / http://localhost:3000/ ProxyPreserveHost on </VirtualHost> There is another virtual host working fine that redirects to another DocumentRoot. I'm running Node on root for testing purpose, but the node application owner is another user. All folders have 705 and files 664 Edit: I stopped apache and run my node app on port 80 and it working fine, I could access node app from my ip and domain.

  Read the article

• How much money can I save from installing a 80 plus bronze or gold PSU? [closed]

  - by David

  Currently I've only a 300 watt PSU and my pc is working like a charm but with all the components it should use the psu to the max. Recently I've read about 80 plus certificate and I'm wondering if it's worth to buy a 80 plus certificate psu? My power cost last year was also higher then before and my pc turns almost 14/7 a day. I mean power cost in used power not in augmented prices. I'm also planing to buy a SLI video card.

  Read the article

• Downloaded chm is blocked, is there a solution?

  - by David Rutten

  CHM files that are downloaded are often tagged as potentially malicious by Windows, which effectively blocks all the html pages inside of it. There's an easy fix (just unblock the file after you download it), but I was wondering if there's a better way to provide unblocked chm files. What if I were to download the chm file (as a byte stream) from our server inside the application, then write all the data to a file on the disk. Would it still be blocked? Is there another/better way still? Edit: Yes, downloading the file using a System.Net.WebClient does solve the problem. But, is there still a better way?

  Read the article

• System Centre Essentials 2007 Clients Losing Status

  - by David Collie

  Clients that have been reporting their state fine suddenly start reporting "Windows 0.0" for their OS and "Not yet contacted" for their Last Contacted date even though previously these values were present and correct. Any idea why this might be happening? I've spend a long time playing with wsauclt etc and just when I think I've the problem it comes back again! Thanks.

  Read the article

• File property information (last write time and file size) in explorer out of date by hours over netw

  - by David L Morris

  An application is running on a windows XP prof machine picking up file from a network share from another windows machine. It detects that the file has been updated (by date and time or optionally file size) and reads it for any new data. Most of the time the last write time and file size, seems to be up to date. Occasionally, this information stops being updated, even though the file is growing (intermittently during the day) with appended content, so that the last write time and file size remain fixed at some arbitrary moment. This is visible in explorer, where it shows a fixed last write time on the reading machine. Just opening the file to edit it in notepad, immediately refreshes the file properties, and the other application picks up where it left of. The file location can't be changed, nor the location of the relevant applications. Any solutions to resolve this problem?

  Read the article

• No HTTP Response from Tomcat 7 EC2 instance

  - by David Kaczynski

  I am new to EC2 (and Tomcat, for that matter), and I am trying to deploy a vanilla Tomcat 7 server to an Ubuntu 12.04.1 EC2 instance and access the default test site over HTTP. My EC2 instance is running, and the Security Group includes port 80: My /etc/tomcat7/server.xml config has been edited to listen for HTTP requests on port 80: 0 I have restarted my Tomcat 7 server via sudo service tomcat7 restart. However, according to sudo netstat -lnp, Tomcat is not listed as listening over port 80: I am unable to get any response from going to the ...amazonaws.com public DNS in a web browser. What am I missing?

  Read the article

• Oracle Error ORA-12560 TNS:Protocol Adapter error?

  - by David Basarab

  I am using Oracle Database 10g. Both Servers are Windows 2003. I have an Orcale Database set up on one server. Here is the TNSNames.ora from the server with the database. # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL.VIRTUALHOLD.COM = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = databaseServer)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) ) The Environmental Variables on the Server are ORACLE_HOME = C:\oracle\product\10.2.0\db_1 ORACLE_SID = orcl I am trying to connect to it from another box that has Oracle Client installed. Here is the tnsnames.ora installed on the other client server. # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\client_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = databaseServer)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = orcl) ) ) ORACLE_HOME = C:\oracle\product\10.2.0\client_1 ORACLE_SID = orcl Locally on the database server I can connect to through sqlplus with no issues. On the client machine I keep getting the error: ORA-12560: TNS:protocol adapter error What am I missing? Does the client TNSNames.ora need to be different?

  Read the article

• Backup SQL server db issue: delete old backup files

  - by David.Chu.ca

  I tried to use sqlmaint.exe tool to back up a database on a remote PC. Here is an example of backup: sqlmaint.exe -S remoteSQLServer\SQLInstance -U username -P pwdxxx -D myDB -BkUpMedia DISK -BkUpDB C:\MSSQL_Backups -DelBkUps 3days ... Here I specified to delete backups older than 3 days. However, the job seems not deleting old bak files on the remote PC(where the SQL server sits). The remote PC has Windows 2008 Server. I also set the C:\MSQL_Backups as shared network drive for EnyOne as owner. My understanding is that the job will delete any bak files older than 3 days. Not sure what I missed? By the way, the job runs at a box with SQL server 2005 installed.

  Read the article

• How to make addin visible on toolbar by script or batch process?

  - by David.Chu.ca

  I have an addin for Excel 2003. I tried to use MSDN's vbs script to make it installed, see my previous post question. It seems working as addin, but it does not displayed on toolbar when it is first installed on a box. What I have to do is to go to Tools-Add-Ins.. to uncheck my addin, for example myAddin, and then go back to the same dialog window again to check it. I think there must be somewhere Excel has config settings in xml or registry? Any way to run a script to set this addin visible in toolbar?

  Read the article

• Why does my PC sometimes think I am constantly pressing the control key?

  - by David Faux

  I was browsing the web with Chrome and pressed f. A search box appeared. I then pressed s, after which Chrome asked if I wanted to save the web page. I soon realized that my PC was thinking that I was constantly pressing the Ctrl key regardless of what program I was using. In response, I tried clicking both of my Ctrl keys a few times to no avail. This problem arises sporadically as I work. I am not sure what is triggering it. Why could this problem be occurring? Is it the keyboard or software? How should I respond?

  Read the article

• Do these 3 crashes have something in common?

  - by David U

  I'm running OS X 10.6.8 on a Mac Mini. I tried to install 3 applications today and all 3 installations failed. I am wondering if the failures have something in common. First I installed GraphViz. The installation succeeded, but when I try to open any .dot file, I get a dialog that says GraphViz has quit unexpectedly. Next I installed Doxygen. It installed, but when I try to launch it I get a dialog that tells me Doxywizard quit unexpectedly. After some googling I thought perhaps my system lacked QT, and that was the problem. I downloaded the Qt 4.8.4 packages and installed them. But when I try to launch qtdemo.app, or any of the other apps that came with the qt installation, I get a dialog that says I can't open the app because it's not supported on this type of Mac. I have crash logs from GraphViz and Doxygen. They're long and I think it unnecessary to post them unless they would help someone determine my problem. Thanks Excerpt from System Log, added later: 12/13/12 5:26:21 PM [0x0-0x4f04f].com.apple.DiskImageMounter[1322] 2012-12-13 17:26:21.927 DiskImages UI Agent[1333:903] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 5:30:31 PM [0x0-0x1a01a].org.mozilla.firefox[824] [ConvConfHandler] isPreferred contentType: application/x-apple-diskimage 12/13/12 5:35:32 PM DiskImages UI Agent[1384] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 5:35:32 PM [0x0-0x5a05a].com.apple.DiskImageMounter[1376] 2012-12-13 17:35:32.988 DiskImages UI Agent[1384:903] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 6:07:33 PM DisplayLinkUserAgent[772] (00116500.405)-[DLDistributedNotificationCenter stream:handleEvent:] reconnected. 12/13/12 6:07:33 PM [0x0-0x6c06c].backupd-helper[1446] Not starting Time Machine backup after wake - less than 60 minutes since last backup completed. 12/13/12 6:08:43 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/BrotherPPD.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.3-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.3-Patch-2-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.5-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/PIXMA iP6000D 290.pkg 12/13/12 6:14:39 PM com.apple.launchd.peruser.501[359] ([0x0-0x70070].com.att.graphviz[2047]) Job appears to have crashed: Bus error 12/13/12 6:14:41 PM ReportCrash[2056] Saved crash report for Graphviz[2047] version 2.28 (2.28.0) to /Users/duzzell/Library/Logs/DiagnosticReports/Graphviz_2012-12-13-181441_Amun.crash 12/13/12 6:15:19 PM com.apple.launchd.peruser.501[359] ([0x0-0x74074].org.doxygen[2070]) Job appears to have crashed: Bus error 12/13/12 6:15:19 PM ReportCrash[2056] Saved crash report for Doxywizard[2070] version 1.8.2 (???) to /Users/duzzell/Library/Logs/DiagnosticReports/Doxywizard_2012-12-13-181519_Amun.crash

  Read the article

• Should I expect ICMP transit traffic to show up when using debug ip packet with a mask on a Cisco IOS router?

  - by David Bullock

  So I am trying to trace an ICMP conversation between 192.168.100.230/32 an EZVPN interface (Virtual-Access 3) and 192.168.100.20 on BVI4. # sh ip access-lists 199 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 # sh debug Generic IP: IP packet debugging is on for access list 199 # sh ip route | incl 192.168.100 192.168.100.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.100.0/24 is directly connected, BVI4 S 192.168.100.230/32 [1/0] via x.x.x.x, Virtual-Access3 # sh log | inc Buff Buffer logging: level debugging, 2145 messages logged, xml disabled, Log Buffer (16384 bytes): OK, so from my EZVPN client with IP address 192.168.100.230, I ping 192.168.100.20. I know the packet reaches the router across the VPN tunnel, because: policy exists on zp vpn-to-in Zone-pair: vpn-to-in Service-policy inspect : acl-based-policy Class-map: desired-traffic (match-all) Match: access-group name my-acl Inspect Number of Half-open Sessions = 1 Half-open Sessions Session 84DB9D60 (192.168.100.230:8)=>(192.168.100.20:0) icmp SIS_OPENING Created 00:00:05, Last heard 00:00:00 ECHO request Bytes sent (initiator:responder) [64:0] Class-map: class-default (match-any) Match: any Drop 176 packets, 12961 bytes But I get no debug log, and the debugging ACL hasn't matched: # sh log | inc IP: # # sh ip access-lists 198 Extended IP access list 198 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 Am I going crazy, or should I not expect to see this debug log? Thanks!

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >