Search Results

Search found 21398 results on 856 pages for 'display adapter'.

Page 45/856 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Isopropyl okay to use on MacBook screen?

  - by Archagon

  I've always used a mixture of isopropyl alcohol and distilled water to clean my computer screens (50% water and 50% * 70% isopropyl). From what I understand, these are exactly the same ingredients used in most commercial screen cleaners, perhaps even more diluted. I recently used this solution to wipe off my 2010 MacBook Pro screen, and there don't seem to be any problems, but this support page explicitly says not to use isopropyl. Now I'm worried that I might have inadvertently damaged something. I'm also concerned because I once managed to dissolve the surface rubber lining of one of my mice with the isopropyl solution, and the MacBook Pro display has a thin rubber bezel keeping the glass in place. Why would Apple single out isopropyl on their support page? Should I be concerned?

  Read the article

• Using PCIe and onboard together

  - by dave

  I'm currently using my PCI Express card to run 2 monitors and my onboard to run another. It works fine despite people saying it won't. I use a gadget to monitor my PCI card but would also like to monitor my onboard GPU as well. I play a game called Eve Online and when I'm running my accts I can only get 20 fps. Before, when I was using just my PCI card, I was getting 60+. To solve this, I set the display options to interval immediate, it was set to one before. My computer handles it no problem at all, but I was always told this was immpossible. I was hoping someone could explain how and why this is working. Thanks! My setup is: i7 2600k 16 GB RAM XFX HD6970 2GB

  Read the article

• "Input not Supported" on external monitor

  - by Shalan

  when it rains, it pours! Im helping a friend with his Dell Inspiron 1520. The hdd crashed and and top of that, the screen is cracked. I've replaced the hdd (SATA-5400), but the lcd replacement is only comin in a months time. I've tried to: hook the laptop up to an Acer 18.5" lcd monitor via VGA, boot up into Windows 7 installer, get to the Step-1 screen, Switch to external display (Function-F8) ...and get the "Input not supported" message on the Acer lcd. I know that this is a resolution problem, but cant for the life of me figure out how to solve this. I've also tried, hooking it up to my TV via Composite cables (got a VGA-Composite adaptor). Please could someone advise me what to do? -Thank u!

  Read the article

• Resolution of monitor is not supported by motherboard

  - by Sandesh

  I have Desktop with configuration Pentium 4,945 intel chipset board,dual booting with win 7 and ubuntu 10.10 (no graphics card) Recently i purchased Dell IN2020M 20" with native resolution of 1600x900 but my display allow maximum of 1024x768 because of this when i play any video in full screen mode it doesn't play smoothly or frames are refreshed jerkily I have tried updating my VGA driver but its doesn't helping me much. Is there any way to solve this problem ? 1if i want to replace monitor what maximum resolution should i buy ? 2if i want to upgrade(graphics card/motherboard) my desktop what is the minimum configuration to support the current system. Thanks in advance

  Read the article

• Creating a network adapter - how hard is it?

  - by Vilx-

  I'm interested in building a little (commercial) device on top of Arduino. I want it to be able to interface with network. Network as in standard Ethernet, Cat5, RJ-45, etc. I know that there is an Ethernet Shield, but it costs even more than the Arduino itself, and it's pretty big. Naturally, I want my device to be as small and as cheap as possible. So I'm thinking about recreating an Ethernet module myself. The problem is - I haven't got any experience with Ethernet, nor do I have a good idea where to start looking. Thus I can't even say if my ideas are feasible. Ultimately I would like the device to have three ports - one for incoming signal, two for outgoing, so the device is essentially a little switch where it is plugged in itself as well. The switching capabilities need not be very fast - the volume of data will be low. 10Mbit is more than enough, can be even slower. If that is not possible, a single port for controlling the device itself will also do. Another possibility I'm considering is power line communications - sending information through power lines. That's another area I've no experience with. What hardware should I be looking at, and where can I find information about the necessary software? So - can anyone tell me if these ideas are feasible, and if yes - where should I start looking?

  Read the article

• Motherboard with embedded hdmi problems with Windows 8 Consumer Preview (64bit)

  - by duluca

  I'm specifically referring to GIGABYTE GA-E7AUM-DS2H LGA 775 NVIDIA GeForce 9400 HDMI Micro ATX with a Core 2 Duo chip. This computer is connected to a Sharp Aquous TV using HDMI. It all worked fine with Windows 7 64 bit. In Device Manager I see GeForce 9400 and have installed the latest NVidia drivers (295.73 WHQL). However, when I click on the change the screen resolution to 1920x1080, I see that Windows 8 thinks that it's using some other graphics card with Microsoft Basic Display Driver. This was made clear, when I tried to launch the NVidia tools and it claimed that the current monitor (in this case my TV) wasn't attached to the GeForce 9400 card. In Device Manager, there's a "Coprocessor" and "Unknown device" without drivers, but I've no idea what they are. I've run the original CD that the motherboard came with no success. Any ideas?

  Read the article

• Android onClickListener options and help on creating a non-static array adapter

  - by CoderInTraining

  I am trying to make an application that gets data dynamically and displays it in a listView. Here is my code that I have with static data. There are a couple of things I want to try and do and can't figure out how. MainActivity.java package text.example.project; import java.util.ArrayList; import java.util.Arrays; import java.util.Collections; import android.app.ListActivity; import android.os.Bundle; import android.view.View; import android.widget.AdapterView; import android.widget.AdapterView.OnItemClickListener; import android.widget.ArrayAdapter; import android.widget.ListView; import android.widget.TextView; import android.widget.Toast; public class MainActivity extends ListActivity { //declarations private boolean isItem; private ArrayAdapter<String> item1Adapter; private ArrayAdapter<String> item2Adapter; private ArrayAdapter<String> item3Adapter; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); Collections.sort(ITEM1); Collections.sort(ITEM2); Collections.sort(ITEM3); item1Adapter = new ArrayAdapter<String>(this, R.layout.list_item, ITEM1); item2Adapter = new ArrayAdapter<String>(this, R.layout.list_item, ITEM2); item3Adapter = new ArrayAdapter<String>(this, R.layout.list_item, ITEM3); setListAdapter(item1Adapter); isItem = true; ListView lv = getListView(); lv.setTextFilterEnabled(true); lv.setOnItemClickListener(new OnItemClickListener() { @Override public void onItemClick(AdapterView<?> parent, View view, int position, long id) { // When clicked, show a toast with the TextView text if (isItem) { //ITEM1.add("another\n\t" + Calendar.getInstance().getTime()); Collections.sort(ITEM1); item2Adapter.notifyDataSetChanged(); setListAdapter(item2Adapter); isItem = false; } else { item1Adapter.notifyDataSetChanged(); setListAdapter(item1Adapter); isItem = true; } Toast.makeText(getApplicationContext(), ((TextView) view).getText(), Toast.LENGTH_SHORT).show(); } }); } // need to turn dynamic static ArrayList<String> ITEM1 = new ArrayList<String> (Arrays.asList( "ITEM1-1", "ITEM1-2" )); static ArrayList<String> ITEM2 = new ArrayList<String> (Arrays.asList( "ITEM2-1", "ITEM2-2" )); static ArrayList<String> ITEM3 = new ArrayList<String> (Arrays.asList("ITEM3-1", "ITEM3-2")); } list_item.xml <?xml version="1.0" encoding="utf-8"?> <TextView xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent" android:padding="10dp" android:textSize="16sp" > </TextView> What I want to do is first pull from a dynamic source. I need to do what is almost exactly like this tutorial... http://androiddevelopement.blogspot.in/2011/06/android-xml-parsing-tutorial-using.html ... however, I can't get the tutorial to work... I also would like to know how I can make the list item clicks so that if I click on "ITEM1-1" it goes to the menu "ITEM2-1" and "ITEM2-2". and if "ITEM1-2" is clicked, then it goes to the menu with "ITEM3-1" and "ITEM3-2"... I am totally a noob at this whole android development thing. So any suggestions would be great!

  Read the article

• How to invoke the getView method in the baseAdapter in Android from another WebService Bean?

  - by greysh

  The adapter in my code as follows, I extends the base adapter: @Override public View getView(final int position, View convertView, ViewGroup parent) { ViewHolder vHolder; // if (convertView == null) { vHolder = new ViewHolder(); convertView = mInflater.inflate(R.layout.home_item, null); vHolder.albumIcon = (ImageView) convertView .findViewById(R.id.albumIcon); try { Bitmap icon = aws.getAlbumImg(itemInfolist.get(position) .getAlbumInfoCol().get(0).getAlbumID(), 0); if (icon != null) { vHolder.albumIcon.setImageBitmap(icon); } else { vHolder.albumIcon.setImageBitmap(BitmapFactory.decodeResource( context.getResources(), R.drawable.album)); } } catch (Exception e) { vHolder.albumIcon.setImageBitmap(BitmapFactory.decodeResource( context.getResources(), R.drawable.album)); } convertView.setTag(vHolder); return convertView; } However, I download the imagine asynchronously, When invoke Bitmap icon = aws.getAlbumImg(itemInfolist.get(position).getAlbumInfoCol().get(0).getAlbumID(), 0); Some pictures which haven't downloaded will use the default image, after these picutures have downloaded in another Web Service Bean, I want the Web Service bean sends a message to invoke the getView method in this adapter in order to implement the auto refresh function. But if I change the Web Service Download Bean as follows,it will cause the exception 03-19 07:46:33.241: ERROR/AndroidRuntime(716): android.view.ViewRoot$CalledFromWrongThreadException: Only the original thread that created a view hierarchy can touch its views. HomeAdapter mHomeAdapter; public AlbumWS(HomeAdapter homeAdapter) { mHomeAdapter = homeAdapter; } And after download, public boolean getAlbumImgWS(final ArrayList albumIDs) { new Thread(new Runnable() { @Override public void run() { // TODO Auto-generated method stub AlbumInfoWS aiws = new AlbumInfoWS(); for (int i = 0; i < albumIDs.size(); ++i) { if (ABSCENTALBUMIMGS.contains(albumIDs.get(i))) { continue; } if (FunctionUtil.isExist(albumIDs.get(i))) { continue; } String urlPath = aiws.getAlbumImage("en_US", Config.IMG_ATTIBUTETYPE, albumIDs.get(i)); boolean ret = FunctionUtil.simpleDownload(Config.HOST + urlPath, "/data/data/com.greysh.amped/img/" + albumIDs.get(i) + ".jpg"); if (!ret) { if (!ABSCENTALBUMIMGS.contains(albumIDs.get(i))) { ABSCENTALBUMIMGS.add(albumIDs.get(i)); } } mHomeAdapter.notifyDataSetChanged(); } } }).start(); return true; }

  Read the article

• Using "margin: 0 auto;" in Internet Explorer 8

  - by stusmith

  I'm in the process of doing some advance IE8 testing, and it seems that the old technique of using "margin: 0 auto;" doesn't work in all cases in IE8. The following piece of HTML gives a centered button in FF3, Opera, Safari, Chrome, IE7, and IE8 compat, but NOT in IE8 standard: <div style="height: 500px; width: 500px; background-color: Yellow;"> <input type="submit" style="display: block; margin: 0 auto;" /> </div> (As a work-around I can add an explicit width to the button). So the question is: which browsers are correct? Or is this one of those cases where the behaviour is undefined? (My thinking is that all the browsers are incorrect - shouldn't the button be 100% width if it's "display: block"?) UPDATE: I'm being a dunce. Since input isn't a block-level element, I should have just contained it within a div with "text-align: center". Having said that, for curiosity's sake, I'd still like to know whether the button should or shouldn't be centered in the example above. FOR THE BOUNTY: I know I'm doing odd things in the example, and as I point out in the update, I should have just aligned it center. For the bounty, I'd like references to the specs that answer: If I set "display: block", should the button be width 100%? Or is this undefined? Since the display is block, should "margin: 0 auto;" center the button, or not, or undefined?

  Read the article

• Recommendation for a Pagination procedure AJAX PHP

  - by Jamex

  Hi, I am not sure the correct terminology for the process that I am trying to describe. I don't even know which platform is underlying the technique. If you understand my description, please give the link to the site(s) and or the keyword name of the process. I think it is done by AJAX, but I am not certain. I use php as the backend code, I just need to find a way to dynamically display the results. Please give suggestions. I forgot the name of the sites that use this, and my link history expired. TIA Description: The page would have a search form and options. After the user submits, the search is initiated, and the results appear inside the dedicated result area. The page does not refresh, just the info inside the result area. The display area will show 20 (or whatever) results (lines). There will be next, and previous buttons. If you hit next, the next set of results will display. I am writing a code that generates 20 results for each display. There is no set number of results, so the results might have a start/first page, but do not have an end page. Each time the user hits 'next', the program would generate/load new results. It would also store previous results, so that when a user hits 'prev', the previous results can instantly come up. What techniques/program are theses?

  Read the article

• External monitor turning black intermittently

  - by coding crow

  I have installed an external monitor (Dell ST2220L, 21.5 inch) on my laptop (Sony Vaio). I am using a DVI-D cable for connection. Since the laptop does not have a DVI-D port, I have connected a DVI-D to HDMI connector on the laptop end and inserted the cable in HDMI port of the laptop.. I have switched off the laptop display and adjusted the screen resolution on the Dell external monitor to 1920 x 1080 and adjusted colors for the Windows 7 and brightness and contrast from the monitor. The problem is the monitor turns of blank intermittently for 1-2 seconds and turns on again at random interval. What could be the reason for this and how to get rid of this problem?

  Read the article

• Overriding CSS style 'display:none' in javascript

  - by jsarma

  I'm trying to add a checkbox toggle that hides and shows list elements by changing their style display attribute from "none" to "inline", but it's not working. I'm setting the attribute's style to "display:none" in the CSS file. Then I set it to "display:inline" in javascript when someone checks a box. The javascript is successfully changing the element's property to inline, but for some reason the element remains invisible. If I do the opposite, by setting the display to inline in the CSS and overriding it to none in the javascript, it works fine. I don't see why this would work one way but not the other. I'm using chrome. Here is the code. Any feedback is appreciated. CSS file: #tabmenu li[status='disabled'] a, a.active, #disabled { color: #777777; background: #DDDDDD; font: normal 1em Arial; border: 1px solid black; border-radius: inherit; padding: 0px 5px 0px 5px; margin: 0px; text-decoration: none; cursor:hand; display:none; } HTML: <ul id="tabmenu"> <li name='tab' id='tab1' selected='no' status='disabled'></li> </ul> JAVASCRIPT (from command line, or onchange of a checkbox) tab = document.getElementById('tab1'); tab.style.display = 'inline';

  Read the article

• Network Explorer Intermittently Fails to Display all Computers in Work Group

  - by graf_ignotiev

  I run a small computer lab of 10 computers and occasionally, when using the network explorer (a.k.a Network Browser) some or all of the remote computers will fail to appear. If I try to access a remote computer by its name I get an unspecified error (code 0x80004005), but I am still able to access it with the computer's IP address. The strangest part is that the problem will inexplicably go away after waiting awhile. Each computer is running Windows 7 x64 Enterprise and has identical hardware, software and configuration. They are all on the same subnet and in the same workgroup. I've spent days researching the problem and have tried the following solutions: Updated the BIOS, chipset and network adapter drivers Changed Power Settings in Network Adapter Properties so that the computer will not turn it off Disabled the Computer Browser service Changed the DHCP node type to broadcast Reviewed the Event Viewer logs Steps 3 and 4 have seemed to help the problem a little bit, but not completely. I'm beginning to suspect that the problem might lie with our router which is a ZyXEL ZyWALL 2WG, as the packets sent by Network Discovery may not be returning in time, but I wanted to get some perspective in the issue before I went any further.

  Read the article

• Images not displayed in silverlight when app is run

  - by Sean

  I'm trying to display an image within a Silverlight application but the image does not display when the application is run. When creating the project within Visual Studio I chose the "Automatically generate a test page to host Silverlight at build time" option. Complete code as an example: <UserControl x:Class="SilverlightApplication3.Page" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Width="400" Height="300"> <StackPanel> <Image Source="http://www.beachtownpress.com/db5/00415/beachtownpress.com/_uimages/beach7.jpg" /> </StackPanel> </UserControl> The application appears perfectly within Visual Studio, but when I run the application, the image does not display. Any ideas?

  Read the article

• Using a .delay() function before .css() manipulation in jQuery

  - by Fabian

  I have this: var $ul = $(this).children("ul"); $ul.animate({opacity: 0}, 1000); $ul.delay(1000).css("display", "none") It's for my dropdown menu, and I want it to fade off before it disappears using the display: none; CSS property. However it appears that the .delay() cannot be used on the .css(); it doesn't work, the $ul just disappears right away. I can't use $ul.animate({opacity: 0, display: "none"}, 1000); either.

  Read the article

• Ubuntu xrandr rotate issue

  - by user83544

  I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

  Read the article

• Acer LCD says "no signal"

  - by Ken

  I have an Acer 24" LCD (model "AL2423WDR") that's about 3 years old. It worked perfectly for most of its lifetime so far. Recently it started giving problems. When I turn it on, it either says "no signal" on the display, or the power light goes yellow (as if in power-saving mode). This happens with both DVI and VGA (both of which worked fine before), and stranger still, the 4 buttons on the front, for accessing the on-screen menus, don't do anything. I've also tried different computer hardware and software (PC/Mac, Linux/MacOS), but nothing has worked. I've tried power-cycling it (with both the power button and the power switch), and also unplugging it entirely. The nonworking buttons suggest to me an issue with the firmware. I found a place on Acer's website that says I can send it in to have it fixed, at my expense, but I'll avoid that if I can. Is there a way to fully reset it manually? Or is there something else I can try?

  Read the article

• Can't get intel atom g-500 video driver to work with ubuntu 10.10 netbook edition.

  - by Matthew

  First of all I am completely new to Linux, so if you respond, please do so in a 'linux for dummies' tone so that my brain will be able to process it. I recently installed ubuntu on my dell mini-inspiron 1010. It has one GB of ram and an intel atom processor that uses the intel 500 graphic accelerator driver for windows and can run 1024x768 comfortably in xp. When I was installing ubuntu had quite a bit of trouble with my display and I am still unable to adjust my settings from 800x600x0x0 and there is no hardware acceleration. I visited the intel site and installed the linux drivers with the help of a friend but still no change. I tried adding resolution settings through xconf but they could not be applied even after I added the values. I am probably going about this totally wrong, but I've spent quite a lot of time browsing through forums and still haven't found a solution. Any help would be greatly appreciated. Also any other beginner tips that you have would be much appreciated. Thanks in advance, Matt

  Read the article

• Display with intel integrated graphics, bitcoin mine with Radeon 6950

  - by karategeek6

  I'm on Ubuntu Linux 11.04 64 bit. I have an intel i5 with integrated graphics and a Radeon 6950, with one monitor. I would like to run my graphics on the integrated card, and run bitcoin mining on the 6950. I have bitcoin mining working when I use the 6950 for both display and mining. Every time I try and and use the integrated graphics instead, OpenCL doesn't recognize my 6950. Using aticonfig --initial when using the integrated graphics for display breaks things. So I used the xorg.conf it created as a basis and tried to manually edit it. I really don't know what I'm doing, though. My last attempt is given below. The graphics ran off the integrated card, but the 6950 wasn't recognized. Any help would be greatly appreciated! xorg.conf: #Section "ServerLayout" # Identifier "Intel Layout" # Screen "Default Screen" # Identifier "aticonfig Layout" # Screen "aticonfig-Screen[0]-0" # Screen 0 "aticonfig-Screen[0]-0" 0 0 #EndSection Section "Module" Load "glx" EndSection # Intel Section "Device" Identifier "Intel Integrated Graphics" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Monitor" Identifier "Default Monitor" Option "VendorName" "Monitor Vendor" Option "ModelName" "Monitor Name" Option "DPMS" "true" EndSection Section "Screen" Identifier "Default Screen" Device "Intel Integrated Graphics" Monitor "Default Monitor" DefaultDepth 24 EndSection # ATI Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Can Current Backflow from Powered Hub's Adapter & cause PC Damage?

  - by SuperUserMan

  Getting this short: Can current flow from a powered USB hub's power adapter (lying 10 Meter away) back to computer via usb port and cause damage to Computer components like mobo, etc? What should be my concerns? Using a 2 Amp 5V Power adapter to power a 10m Long Active Repeater USB extension cable with 4 port HUB & plugging into PC's Front port, causes PC Chassis fan to keep running (thought slower than regular speed) Front Chassis HDD & power LED to turn on (though bit dim) may be other things which i cant detect/see at chip level, in motherboard?? All this even after PC is shut down (bit scary) More detail (in case still want to read): To run 4 High power (needing 450 mAmps) Wifi Adapters, far away from PC, Bought Active Repeater USB Extension Cable with 4 Ports & power port at far end http://www.ebay.com/itm/33FT-USB-2-0-Male-to-Female-Extension-Cable-Hub-Splitter-Adapter-with-4-USB-Port-/390846115254 Then added a locally bought 2 Amp 240V AC to 5V DC Power Adapter and plugged into USB hub which is a part of & situated at far end of a 10 Meter Active Repeater usb extension cable. Even 4 Wifi Adapters run fine (appear to) using this setup, but running chassis fan, dimly lighted Power & HDD LED, even when PC is switched off is bit scary and surely mean 5V & some current is flowing all though that 10 meter extension cable into my USB port & powering stuff. Can this cause damage? and what should be my concerns. Of course I can't switch off the power adapter (lying 10 meters away from PC) every time I switch off my PC to prevent this.

  Read the article

• Is VGA port hot-pluggable?

  - by Martin Bøgelund

  In meetings, I often see people detaching the VGA connector from one running laptop and connecting it to another, while the projector is still on. Is this 100% risk free, and OK by design of the VGA standard? If there's a risk involved in hot-plugging VGA, can it be removed by turning off or suspending either laptop, display, or both? I see this being done all the time without causing disaster, so clearly I'm not interested in answers stating "we do it all the time, so it should be OK!". I want to know if there's a risk - real or in theory - that something breaks when doing this. EDIT: I did an internet search on the topic, and I never found a clear statement as to why it is safe or unsafe to hot swap VGA devices. The typical form is a forum question asking basically the same question as I did, and the following types of statements Yes it's hot swappable! I do it all the time! It involves some kind of risk, so don't do it! You're some kind of moron if you think there's a risk, so just do it! But no explanation as to why it safe or not... Joe Taylors answer below contains a link to a forum post and answers that basically give me the same statements as mentioned above. But again, no good explanation why. So I looked for an actual manual for a projector, and found "Lenovo C500 Projector User’s Guide". It states on page 3-1: Connecting devices Computers and video devices can be connected to the projector at the same time. Check the user’s manual of the connecting device to confirm that it has the appropriate output connector. [image] Attention: As a safety precaution, disconnect all power to the projector and devices before making connections. But again, no good explanation.

  Read the article

• No video signal at boot with custom built computer

  - by Bart Pelle

  After booting my custom built computer, neither the VGA nor the HDMI methods from the video card seem to emit any signal to the display. I have tested both a regular VGA screen and a modern HDMI screen. Both did not receive signal. Below are the specifications from my computer build: Intel Core i5 3350P ASRock B75 Pro 3-M Seagate Barracuda 7200.14 ST1000 DM003 1000GB Corsair Vengeance LP CML 8GX 3M2 A1600 CGB Blue (2 cards) Cooler Master B Series B600 Club 3D Radeon HD7870 XT Jokercard Samsung SH-224 BB Black Sharkoon T28 Case The motherboard does not emit any beeps on startup. The CD tray opens properly and all fans spin. All cables are properly connected. All components are new and no damage was found on any of the components. The fans on the GPU spin aswell. The VGA test we did was by using the onboard graphics from the Intel i5, but this gave no result. The HDMI test was from the GPU which did not emit any signal either. We have not been able to test out the DVI, could this be important to test, even though all the other methods did not work? Thank you for your time and hopefully reply.

  Read the article

• Prevent Windows from resizing all the apps on the desktop when switching monitors

  - by Greg Hewgill

  Short version: When moving my laptop and sleeping between using different monitors, all my open windows are crammed into the upper left corner as if they tried to fit on the laptop internal screen resolution. I plug in and switch to the external monitor before unlocking my session. Is there a way to prevent this automatic resizing? Longer version: I have a laptop that I move between two locations. I have one docking station, and the same kind of monitor configured for 1600x1200, in both locations. The internal laptop screen is awful so I don't use it. Location A: Docking station, monitor connected via DVI. Location B: No docking station, external monitor connected via VGA cable. In this location I have the laptop lid open for keyboard access but I don't use the laptop screen. When moving from Location A to Location B, the laptop wakes up from sleep, displaying the screen on the internal monitor. I switch to the external monitor display (using Fn+F8 on this laptop), and only after that do I unlock my session with my password. However, Windows has crammed all my nicely arranged windows into the upper left corner as if it were trying to fit them all on the laptop internal screen resolution. When moving from Location B to Location A, I have the laptop lid closed when using the docking station so Windows apparently concludes the screen resolution is 1600x1200 and doesn't resize any windows. The laptop is a Dell Latitude running Windows 7 Professional.

  Read the article

• How do I set up dual monitors on Kubuntu 10.04 using the latest nVidia drivers with a 9800M video ca

  - by NoCatharsis

  I'm a Linux newb so please try to keep the lingo low-key. I installed the latest nVidia drivers on my laptop using the 9800M card. The laptop is a Gateway P-7805u and I'm connected to the second monitor using VGA. Also, before installing the nVidia drivers (and just using the basic drivers included with Kubuntu 10.04), basic dual monitor support worked, except I could not enable compositing features for some reason. So I thought the proprietary drivers would fix this. Several issues have arisen since installation: 1) I've clicked through all of the display settings to activate the second screen with absolutely no change. 2) When I try to apply settings and Save Configuration as the nVidia help suggests, I am told that I cannot save to the X.conf file. I assume this is due to innate permissions on my user settings, which I have no idea how to properly configure. 3) I have no idea where to go from here, as most of the fixes I found online involve Linux syntax and verbiage, to which I'm totally clueless after spending over half my life with Windows.

  Read the article

• Ubuntu xrandr rotate issue

  - by user83544

  I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >