Search Results

Search found 1303 results on 53 pages for 'dr plaguey'.

Page 45/53 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Backup solution, or, how Duplicati duped me

  - by blarghmaster

  TL/DR version: Mono + Duplicati.commandline.exe restore etc. etc. spits this out for several files regardless of what I try. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Any advice here, or an idea of where to look for a better solution? FULL STORY: Ive recently put together an nice clean, friendly backup solution for several servers, predominantly Linux, but occasionally a windows box is added too. The solution as is meets all my requirements and does it well... save 1: cross-compatibility The solution is based on a combination of several elements, but eventually comes done to using Duplicity and Duplicati for the actual storage of files. The entire solution was ready to go before i realized that Duplicati, does not, in fact allow me to restore my files to a Linux box, regardless of what the commandline under Mono might tell you. It just spits out errors on random zip and image files, for apparently no good reason as i have tried several options to get it to restore, and several versions of Mono including installing it pretty much lib-for-lib. There is no effective log file for the reasons for these errors, and even the "--debug-output=true" flag does nothing. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Now i could most likely use the friendly instructions on Duplicati's site and script a bash equivalent of the restore, but that's not exactly ideal. Any advice on this? or possibly an alternative solution that presents the same benefits of Duplicati/Duplicity but that actually works across platforms?

  Read the article

• Xen PV packet loss

  - by Delphinator

  I'm having some serious issues with packetloss with one of my servers. This server is a somewhat old (P4-era) machine running Debian Squeeze and Xen 4.0. There are two domUs running on it (both also Debian Squeeze), one gateway and a fileserver. Unfortunatly the processor has no virtualization extensions, therefore only PV can be used. While investigating why our network seems to be slower than it should I found some pretty bad packet loss (~25%). After further investigation and several experiments I did a measurment between the dom0 and one of the domUs: Server listening on UDP port 5001 Receiving 1470 byte datagrams UDP buffer size: 110 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to dom0, UDP port 5001 Sending 1470 byte datagrams UDP buffer size: 110 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.2(domU) port 33817 connected with 192.168.1.100(dom0) port 5001 [ 4] local 192.168.1.2(domU) port 5001 connected with 192.168.1.100(dom0) port 48606 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 46.3 MBytes 38.7 Mbits/sec [ 3] Sent 33020 datagrams [ 3] Server Report: [ 3] 0.0-10.0 sec 46.2 MBytes 38.6 Mbits/sec 0.030 ms 89/33019 (0.27%) [ 3] 0.0-10.0 sec 1 datagrams received out-of-order [ 4] 0.0-10.2 sec 43.0 MBytes 35.3 Mbits/sec 13.074 ms 11575/42256 (27%) tl;dr: 27% packet loss from dom0 to domU with 50Mbit UDP packets. Same thing happens from anywhere in the network. The problem gets better for smaller bandwidths (0.047% for 5Mbit) and worse for higher (59% for 200Mbit) ones. I did increase the CPU-weight of the dom0, there is no swapping going on, and actual networking-hardware is not involved. I never expected Xen (or anything related) to drop packets, and I'm completly clueless what to try next.

  Read the article

• Will these optimizations to my Ruby implementation of diff improve performance in a Rails app?

  - by grg-n-sox

  <tl;dr> In source version control diff patch generation, would it be worth it to use the optimizations listed at the very bottom of this writing (see <optimizations>) in my Ruby implementation of diff for making diff patches? </tl;dr> <introduction> I am programming something I have never done before and there might already be tools out there to do the exact thing I am programming but at this point I am having too much fun to care so I am still going to do it from scratch, even if there is a tool for this. So anyways, I am working on a Ruby on Rails app and need a certain feature. Basically I want each entry in a table of mine, let's say for example a table of video games, to have a stored chunk of text that represents a review or something of the sort for that table entry. However, I want this text to be both editable by any registered user and also keep track of different submissions in a version control system. The simplest solution I could think of is just implement a solution that keeps track of the text body and the diff patch history of different versions of the text body as objects in Ruby and then serialize it, preferably in human readable form (so I'll most likely use YAML for this) for editing if needed due to corruption by a software bug or a mistake is made by an admin doing some version editing. So at first I just tried to dive in head first into this feature to find that the problem of generating a diff patch is more difficult that I thought to do efficiently. So I did some research and came across some ideas. Some I have implemented already and some I have not. However, it all pretty much revolves around the longest common subsequence problem, as you would already know if you have already done anything with diff or diff-like features, and optimization the function that solves it. Currently I have it so it truncates the compared versions of the text body from the beginning and end until non-matching lines are found. Then it solves the problem using a comparison matrix, but instead of incrementing the value stored in a cell when it finds a matching line like in most longest common subsequence algorithms I have seen examples of, I increment when I have a non-matching line so as to calculate edit distance instead of longest common subsequence. Although as far as I can tell between the two approaches, they are essentially two sides of the same coin so either could be used to derive an answer. It then back-traces through the comparison matrix and notes when there was an incrementation and in which adjacent cell (West, Northwest, or North) to determine that line's diff entry and assumes all other lines to be unchanged. Normally I would leave it at that, but since this is going into a Rails environment and not just some stand-alone Ruby script, I started getting worried about needing to optimize at least enough so if a spammer that somehow knew how I implemented the version control system and knew my worst case scenario entry still wouldn't be able to hit the server that bad. After some searching and reading of research papers and articles through the internet, I've come across several that seem decent but all seem to have pros and cons and I am having a hard time deciding how well in this situation that the pros and cons balance out. So are the ones listed here worth it? I have listed them with known pros and cons. </introduction> <optimizations> Chop the compared sequences into multiple chucks of subsequences by splitting where lines are unchanged, and then truncating each section of unchanged lines at the beginning and end of each section. Then solve the edit distance of each subsequence. Pro: Changes the time increase as the changed area gets bigger from a quadratic increase to something more similar to a linear increase. Con: Figuring out where to split already seems like you have to solve edit distance except now you don't care how it is changed. Would be fine if this was solvable by a process closer to solving hamming distance but a single insertion would throw this off. Use a cryptographic hash function to both convert all sequence elements into integers and ensure uniqueness. Then solve the edit distance comparing the hash integers instead of the sequence elements themselves. Pro: The operation of comparing two integers is faster than the operation of comparing two strings, so a slight performance gain is received after every comparison, which can be a lot overall. Con: Using a cryptographic hash function takes time to convert all the sequence elements and may end up costing more time to do the conversion that you gain back from the integer comparisons. You could use the built in hash function for a string but that will not guarantee uniqueness. Use lazy evaluation to only calculate the three center-most diagonals of the comparison matrix and then only calculate additional diagonals as needed. And then also use this approach to possibly remove the need on some comparisons to compare all three adjacent cells as desribed here. Pro: Can turn an algorithm that always takes O(n * m) time and make it so only worst case scenario is that time, best case becomes practically linear, and average case is somewhere between the two. Con: It is an algorithm I've only seen implemented in functional programming languages and I am having a difficult time comprehending how to convert this into Ruby based on how it is described at the site linked to above. Make a C module and do the hard work at the native level in C and just make a Ruby wrapper for it so Ruby can make all the calls to it that it needs. Pro: I have to imagine that evaluating something like this in could be a LOT faster. Con: I have no idea how Rails handles apps with ruby code that has C extensions and it hurts the portability of the app. This is an optimization for after the solving of edit distance, but idea is to store additional combined diffs with the ones produced by each version to make a delta-tree data structure with the most recently made diff as the root node of the tree so getting to any version takes worst case time of O(log n) instead of O(n). Pro: Would make going back to an old version a lot faster. Con: It would mean every new commit, the delta-tree would get a new root node that will cost time to reorganize the delta-tree for an operation that will be carried out a lot more often than going back a version, not to mention the unlikelihood it will be an old version. </optimizations> So are these things worth the effort?

  Read the article

• Bugzilla Install question - I'm stuck

  - by Nabeel

  I run Bugzilla's checksetup.pl (migrating an older version), and it always returns: Reading ./localconfig... Checking for DBD-mysql (v4.00) ok: found v4.005 Had to create DBD::mysql::dr::imp_data_size unexpectedly at /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/DBI.pm line 1229, <DATA> line 225. Use of uninitialized value in subroutine entry at /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/DBI.pm line 1229, <DATA> line 225. Had to create DBD::mysql::db::imp_data_size unexpectedly at /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/DBI.pm line 1259, <DATA> line 225. Use of uninitialized value in subroutine entry at /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/DBI.pm line 1259, <DATA> line 225. There was an error connecting to MySQL: Undefined subroutine &DBD::mysql::db::_login called at /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/DBD/mysql.pm line 142, <DATA> line 225. MySQL Version: [root@bugzilla-core TMP]# mysql --version mysql Ver 14.12 Distrib 5.0.60sp1, for redhat-linux-gnu (x86_64) using readline 5.1 And mysql_config: [root@bugzilla-core TMP]# mysql_config Usage: /data01/mysql-5.0.60/bin/mysql_config [OPTIONS] Options: --cflags [-I/data01/mysql-5.0.60/include -g] --include [-I/data01/mysql-5.0.60/include] --libs [-rdynamic -L/data01/mysql-5.0.60/lib -lmysqlclient -lz -lcrypt -lnsl -lm -lmygcc] --libs_r [-rdynamic -L/data01/mysql-5.0.60/lib -lmysqlclient_r -lz -lpthread -lcrypt -lnsl -lm -lpthread -lmygcc] --socket [/tmp/mysql.sock] --port [0] --version [5.0.60sp1] --libmysqld-libs [-rdynamic -L/data01/mysql-5.0.60/lib -lmysqld -lz -lpthread -lcrypt -lnsl -lm -lpthread -lrt -lmygcc] Now, I've tried the latest version of DBD-mysql (4.0.14). I'm completely lost and stumped. I'm not sure where to go from here. Scouring the 'webs haven't returned anything fruitful. Any ideas?

  Read the article

• Private staff network within public network

  - by pianohacker

  I'm the sysadmin at a small public library. Since I got here a few years ago, I've been trying to set up the network in a secure and simple way. Security is a little tricky; the staff and patron networks need to be separated, for security reasons. Even if I further isolated the public wireless, I'd still rather not trust the security of our public computers. However, the two networks also need to communicate; even if I set up enough VMs so they didn't share any servers, they need to use the same two printers at the very least. Currently, I'm solving this with some jerry-rigged commodity equipment. The patron network, linked together by switches, has a Windows server connected to it for DNS and DHCP and a DSL modem for a gateway. Also on the patron network is the WAN side of a Linksys router. This router is the "top" of the staff network, and has the same Windows server connected on a different port, providing DNS and DHCP, and another, faster DSL modem (separate connections are very useful, especially as we heavily depend on some cloud-hosted software). tl;dr: We have a public network, and a NATed staff network within it. My question is; is this really the best way to do this? The right equipment would likely make my job easier, but anything with more than four ports and even rudimentary management quickly becomes a heavy hit on our budget. (My original question was about an ungodly frustrating DHCP routing issue, but I thought I'd ask whether my network was broken rather than asking about the DHCP problem and being told my network was broken.)

  Read the article

• Cannot find wireless driver for HP laptop

  - by rodey

  I have an HP laptop (model: dv7-1267cl, Windows 7 64-bit Home Premium) and I cannot find the wireless driver for the laptop. I am need of a different version because my wireless connection under Windows is flaky and unreliable. I have problems printing to my wireless printer and logging in to and using several sites like reddit.com, phoenix.edu and facebook.com - I get several "page cannot be displayed" messages while using my wireless connection. I disable my wireless adapter and use an ethernet cable and it all works fine. I also used an Ubuntu Live CD to confirm that there is not a problem with the hardware. This is software/driver issue. The drivers were auto installed by the OS. The Device Manager shows the wireless adapter as Atheros AR5009 802.11 a/g/n WiFi Adapter. I have checked the HP website for my laptop and they do not have wireless drivers listed for that model wireless adapter. I have also checked with atheros.com and I do not see my model adapter on their list of available hardware. Device Manager lists the Hardware ID's for my adapter as: PCI\VEN_168C&DEV_002A&SUBSYS_1381103C&REV_01 PCI\VEN_168C&DEV_002A&SUBSYS_1381103C PCI\VEN_168C&DEV_002A&CC_028000 PCI\VEN_168C&DEV_002A&CC_0280 A search for the first Hardware ID turned up this question from experts-exchange.com. tl;dr A driver does not exist for that model adapter.

  Read the article

• IIS serving pages extremely slowly

  - by mos

  TL;DR: IIS 7 on WS2008R2 serves pages really slowly; everyone assumes it's because it's IIS and we should have gone with an Apache solution on Linux. I have no idea where to start debugging the problem. I work in a nearly all-MS shop with a bunch of fellow programmers who think Linux is the One True Way. Management recently added a Windows machine with IIS to serve Target Process (third-party agile system), but the site runs extremely slowly. Everyone, to a man, assumes it's because it's on IIS, and if only management would grow a brain and get some Linux servers in here, we could really start cleaning things up! ...Right. Everyone "knows" IIS isn't fit to serve .txt files. ...Well, as the only non-Microsoft hater in the bunch, I am apparently the only one who thinks maybe the Linux guy who hated being told to set up the IIS server may have screwed things up. I'd like to go fix it, but I don't have any clue as to where to start as I am not a sys admin. Help?

  Read the article

• Anyone know a good mind mapper that works with a scheduler?

  - by GLycan

  TL;DR: Mind mapping tasks to be processed into a schedule based on task metadata. I have all sorts of ideas about what to invest resources (mainly time) in, but when I actually have time to do something I useually end up browsing reddit for not knowing what do to, and the frequancy with which I forget deadlines scares me. I'd love to bring order and structure into my mind, and always know what to do next. So, I want a mind mapping app, where I'd give each branch (types and subtypes of things I want to do) a importance score (if there were two branches, and one had 60 while the other 40, they would respectivily get 60% and 40% of the parent's importance, with the root being 100) and a how soon that branch should be revised/updated (an hobby I want to try out might be checked, say, once a week, while a school subject should be checked once a day) and give each leaf (something I want/need to do) how much time it takes, deadline (if any), and optionally an absolute importance, reoccurrence (guitar practice might repeat once a week), and prerequisites (reading something requires that book (although that could be brought somewhere), coding requires a box, jogging requires being outside) and maybe some other flags, like if it's enjoyable or not. It should either be packaged or working with a schedular app, to which I'd say, look, my day works this way (completely busy from 8 to 9:15, then 15 minutes of being inside with nothing, ..., two hours with box and possibility to go outside, etc), saying that such-and-such pattern is school and happens ever weekday except such-and-such days. The output should be of the form of a schedule, fit for printing or, when I finally get an android, mobile viewing, that schedules tasks with regards to availability of resources and importance (importance being derived from the leaf-task's parent branches), and the set of flags (all work and no play makes me a dull boy). One of these tasks should be reviewing anything that should be updated on that day, including future day layouts (e.g, if the time slots of future days have changed. This should be done every day.) Does anyone know some collection of preferably open-source (or free, or pirateable) tools, or better yet a single one, that accomplishes this task? I know python pretty well, and should be able to write any necessary glue.

  Read the article

• Cannot find wireless driver for HP laptop

  - by rodey

  I have an HP laptop (model: dv7-1267cl, Windows 7 64-bit Home Premium) and I cannot find the wireless driver for the laptop. I am need of a different version because my wireless connection under Windows is flaky and unreliable. I have problems printing to my wireless printer and logging in to and using several sites like reddit.com, phoenix.edu and facebook.com - I get several "page cannot be displayed" messages while using my wireless connection. I disable my wireless adapter and use an ethernet cable and it all works fine. I also used an Ubuntu Live CD to confirm that there is not a problem with the hardware. This is software/driver issue. The drivers were auto installed by the OS. The Device Manager shows the wireless adapter as Atheros AR5009 802.11 a/g/n WiFi Adapter. I have checked the HP website for my laptop and they do not have wireless drivers listed for that model wireless adapter. I have also checked with atheros.com and I do not see my model adapter on their list of available hardware. Device Manager lists the Hardware ID's for my adapter as: PCI\VEN_168C&DEV_002A&SUBSYS_1381103C&REV_01 PCI\VEN_168C&DEV_002A&SUBSYS_1381103C PCI\VEN_168C&DEV_002A&CC_028000 PCI\VEN_168C&DEV_002A&CC_0280 A search for the first Hardware ID turned up this question from experts-exchange.com. tl;dr A driver does not exist for that model adapter.

  Read the article

• Tomcat Solr times out

  - by user568458

  (Plesk 10.4 centos 5.8 linux apache2 server, with Tomcat5 on port 8080 and Apache Solr) I get "The connection has timed out" on requesting domain.com:8080 or www.domain.com:8080 or ip.ad.dr.ess:8080 Every reason I can find why this might be seems not to be the case: Plesk thinks Tomcat is running fine and lists it as an active service. The firewall currently has an accept all rule on port 8080. There's nothing relevant in the catalina tomcat logs (/var/log/tomcat5) - just some stuff from last time tomcat was started. There's no record at all of the requests that fail. netstat -lnp | grep 8080 gives the following, which I beleive means Tomcat is listening to requests to port 8080 on all ip addresses from any ip and any port (please correct me if I'm wrong): : tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 4018/java This covers every cause of this time out that I can find - so I must be missing something fundamental. It seems Tomcat is running, listening to the right port, is getting an appropriate IP address, is not obstructed by a firewall and is not failing after receiving a request in a way which would be recorded in the logs (so I believe it can't be out of memory, or anything like that). I'm all out of ideas on how to continue debugging this. I must have overlooked something obvious. Can anyone help?

  Read the article

• Ping and crawling not working, site still resolving

  - by Andrew Alexander

  Ok, so we're trying to figure out why the site of one of our clients isn't being crawled by Google (we've ruled out robots.txt or meta tags) When we go to the site, either IP address or domain name, the site resolves, everything works. However, Google is getting a 302 redirect (which it apparently isn't following for crawling), and when we ping the address, it times out (note, the site is still resolving in the browser throughout all of this). The site is built in ASP.Net (I assume C#) and so my thoughts were that it was an errant redirect rule, or some other sort of server side issue. We also thought that it might be due to incorrect domain pointing (but if we try to ping the IP, it doesn't work, so that sorta rules that out). We're really not sure what is causing all of these errors, or even if they have one single source. Anyone have any ideas what could be going on? Do you need any more information? To boil it down in a TL; dr: * Site resolving in browser, both IP and domain name. No problems here. * Site not being crawled by Google (gets a 302 it doesn't seem to follow) - it is not due to robots.txt or meta tags * Ping is not working for the IP address. This is very odd, because again, the IP address seems to work fine in the browser. * Our thoughts are either redirect rule issue, domain pointing issue, or possibly some errant code - or some combination of the three

  Read the article

• Whats the easiest route to trying out mono 2.6?

  - by E J

  We have several web applications built on Microsoft technologies (asp.net+mvc framework, built using VS2008, MS SQL Server). I have recently be playing with Ubuntu (9.10), installed using Wubi, and wanted to see if I can get our apps running on a foss software stack. I have got the hang of the very basics of Postgresql and I have read that there is some support for Linq to SQL in mono (as of 2.6) as well as asp.net/MVC. However I am unsure how to go about getting Mono 2.6 up and running. Here is what I have discovered so far: Ubuntu is not meant for the 'cutting edge' it is designed to be stable hence, it sometimes takes a release cycle or two for new software to make it to the repositories Mono is already installed by default, but it is likely to stay at version 2.4 for at least the 10.4 release You can install paralell environments of Mono, if you know what your doing. I have had a go at setting up parallel environments, but haven't had any luck yet. (And TBH I am not certain that that will do what I think it's gonna do). (tl;dr start here) Is there a distribution of Linux similar enough to Ubuntu, that I wouldn't have to start the learning curve all over again, but that will let me install Mono 2.6, Postgresql, (and possibly mono-develop 2.4)? Or should I persist with Ubuntu?

  Read the article

• Daisy-chainable DisplayPort Monitors

  - by thepurplepixel

  I am the proud new owner of a MacBook Pro with a mini-DisplayPort. My desk setup used to allow me to position the screen of my old MacBook beside an external monitor, essentially allowing dual-head. It was also advantageous that my old MBP and my external monitor had the same resolution, 1440x900. Now, I'm searching for a set of two monitors that I can use a HengeDock with. Unfortunately, the MacBook Pro suffers from having only one mini-DisplayPort. Looking up the spec for DisplayPort 1.2 (which the MBP supports), DisplayPort daisy chaining is supported. What I'm looking for is a monitor that has two DisplayPorts so I can daisy chain two monitors off the single mini-DisplayPort. What I don't want is a USB-based video solution. I need full acceleration on both monitors; an external video card won't cut it. I hope I don't have to wait a few years for these monitors to come out. TL;DR: I need two monitors with two DisplayPorts each that I can daisy-chain. Thanks!

  Read the article

• vmware esxi 5, cant create snapshots and consolidate fails, how to delete old or consolidate redo logs?

  - by Scott Szretter

  I have a VM that seems to be working ok, but when VMWare DR (or I) tries to create a snap shot, it fails, and when I view the summary page of the VM it has a warning at the top showing that the disks need to be consolidated. So I go to snapshot manager for the VM and choose consolidate (in snapshot manager, there are no snapshots actually listed by the way). If fails with this error: This virtual machine has 255 or more redo logs in a single branch of its snapshot tree. The maximum supported limit has been reached, creating new snapshots will not be allowed. To create new snapshots, please delete old snapshots or consolidate the redo logs. If I browse the data store (which has plenty of free space, 2 TB and this vm is under 40gb), in the vm folder, I do in fact see a bunch of files, numbered all the way to 0255: myvm-000255-ctk.vmdk myvm-000255-delta.vmdk myvm-000255.vmdk How can I clean all this up? Is there an SSH command line command or can I delete some of the files safely? Thanks!

  Read the article

• TC hashing filters - single rule deletion

  - by exa

  For traffic shaping I'm currently using a setup that looks exactly like the setup from LARTC, on this page: http://lartc.org/howto/lartc.adv-filter.hashing.html I have a simple problem with that - everytime I want to modify something in the hash table (like assign a IP to different flowid), I need to delete the whole filter table and add it again filter by filter. (I actually don't do it by hand, I have a nice program that does it for me... but still...) There is a problem - I got roughly 10k filters allocated this way and deleting and refilling the whole filtertable can get pretty lengthy, which is not exactly good for traffic shaping. My program could easily manage to delete only the rules that need to be deleted (thus reducing the whole problem to several commands and miliseconds), but I simply don't know the command that deletes only the one hashing rule. My tc filter show: filter parent 1: protocol ip pref 1 u32 filter parent 1: protocol ip pref 1 u32 fh 2: ht divisor 256 filter parent 1: protocol ip pref 1 u32 fh 2:a:800 order 2048 key ht 2 bkt a flowid 1:101 match 0a0a0a0a/ffffffff at 16 filter parent 1: protocol ip pref 1 u32 fh 2:c:800 order 2048 key ht 2 bkt c flowid 1:102 match 0a0a0a0c/ffffffff at 16 filter parent 1: protocol ip pref 1 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 1 u32 fh 800::800 order 2048 key ht 800 bkt 0 link 2: match 00000000/00000000 at 16 hash mask 000000ff at 16 The wish: 'tc filter del ...' command that removes only one specific filter (for example the 0a0a0a0a IP match (IP address 10.10.10.10)). Removal of some small subgroup would also be good - for example I could still recreate a bucket (bkt a) pretty fast. My attempts: I tried to number all the filters using prio, but with no help -- they just create something unusuable (but deletable) below, but the bucketed filters remain there after that gets deleted. Any ideas? edit - I'm adding a simplified tl;dr description of the problem: I created hash filter on some interfce just like in this http://lartc.org/howto/lartc.adv-filter.hashing.html I want to find a command that deletes one rule (e.g. 1.2.1.123) from the table, leaving the rest untouched and working.

  Read the article

• How should I configure nginx caching headers for a "baked" static file blog? (Octopress)

  - by Doug Stephen

  I recently deployed an Octopress blog (which is a blogging platform built around Jekyll). It's a static-site blog generator, with no dynamic content or databases to muck about with. It's being served up by nginx. My question is, what is the appropriate expires directive or Cache-Control header that I should set to make sure that visitors get the most up-to-date version of the site when they visit without having to manually refresh? Since the site is just .html files it seems to get cached pretty aggressively. I've tried a million different combinations of expires modified + xxxx and even straight up expires off but I can't seem to wrap my head around it. I'm very new to dealing with caching like this, specifically, on static files that change frequently, and obviously if the site hasn't been changed then I'd like for it to be served up out of the cache. Update (still not solved though): I found open_file_cache, tweaked that. Still no dice. It seems like what I might want to do is use nginx as a proxy cache and use Apache with ETags? Is there really no convenient way to make nginx play nicer with conditional requests from the client? TL;DR: I'm running a static-file blog and I'd like to set up nginx to only serve from the cache if the blog hasn't been updated recently, but I'm too stupid to figure it out myself because I'm relatively new to web servers.

  Read the article

• Thunderbird 11.0.1 and Lightning 1.3: How do I propose a different time for a meeting?

  - by seaao

  This all happens on my x64 Linux workstation btw. tl;dr: My colleague invited some people and me for a meeting. The meeting was scheduled a week to late. I -wrongfully- accepted. How do I propose a new time? To explain a bit more in detail: I received a meeting request in my mailbox. Thunderbird is so nice to let me accept or reject it, and after I click the button to accept, it is directly added to my calendar. But when I double click on the meeting to edit it, I get a function-wise scaled-down version of the meeting: The only settings I can alter are whether I want reminders, and if I go at all. Trying to drag it to another day doesn't work either: My calendar behaves like read-only (which it isn't btw). There are several questions (without answer...) to be found on Stack Overflow and on the Thunderbird knowledge base about using lightning. But I get the idea that I'm one of the few who won't comply with the team even before the meeting is started. My googling revealed no bugs or feature requests in the direction I'm thinking. A link to an explanation how to achieve this, or another perspective about how to reach the desired goal (meeting with my colleagues and me) would be mostly welcome!

  Read the article

• Spreadsheet application that can handle big data OS X

  - by Peter

  I've been working with Excel for quite a while for some statistical analysis that I do regularly. The size of the data that I'm working with has gotten much larger as of late, however. The layout of the databases in question is quite simple, usually just three rows which includes a UNIX timestamp, and EST value, a proprietary numeric value and finally an average of the rows that have a timestamp +/- 1000 that row's timestamp (little AVERAGEIFS() formula). That formula and the EST conversion are the only formulas in the sheet. I'm beginning to work with files with 500,000+ rows. Running the average formula down the entire row takes forever. The end result is the production of print-worthy graphs. I'm looking for either a UNIX CL utility or separate spreadsheet/database application that can handle this amount of data without melting my CPU or making me wait an hour. Is there anything out there? TL;DR: Simple excel sheet with over half a million rows is getting too slow to work with. OS X alternatives?

  Read the article

• HP Laptop recognizes hard drive just long enough to install windows

  - by Joe

  I have an HP laptop, DV6500 (CTO). It refused to boot one day, so I ran some diagnostics (a friend lent me "Hirens Boot Disk", "UBCD" and "PC DR 6"). Everything passed, except for the hdd. I replaced the HDD with a used drive of unknown condition. Installed windows with no problems. Installed the wireless driver, tried to reboot ... no luck. So I went to Best Buy, bought a brand new Western Digital 320gb HDD. Put it in the machine, installed windows (vista home premium). Installed the wired networking driver. Tried to reboot. No luck. Put the first hdd back in the machine, reinstalled windows. Started to install some drivers, went to reboot, and the machine won't come back to life. Put the second hdd in the machine, rinse wash and repeat. I've replaced the memory, even though it passed diagnostics. Problem exists with both brand new memory, and old memory. The BIOS recognizes the hard drive. The computer freezes directly after the bios splash screen, and there is no hard drive activity light. I've tried two linux live distros (gentoo and ubuntu). Neither would run on this laptop, but will on a different HP laptop. UBCD and Hirens Boot Disk both ran, as did PC Doctor 6 which refuses to test anything (gets stuck at "enumerating hard disks"). Is there anything else I can try?

  Read the article

• On linux, what does it mean when a directory has size 0 instead of 4096?

  - by kdt

  Here's a strange thing I haven't seen before -- a directory whose size is reported by ls as 0 instead of 4096, and I can't create any files within it. # ls -ld lib home drwxr-xr-x. 2 root root 0 Feb 7 03:10 home <-- it has zero size dr-xr-xr-x. 11 root root 4096 Feb 4 09:28 lib # touch home/foo touch: cannot touch `home/foo': No such file or directory <-- and I can't create files in it # rm home rm: cannot remove `home': Is a directory <-- look, it really is a dir So what does it mean for a directory to have size 0 instead of 4096? Filesystem is ext4 on fedora core 14. The output of mount is: /dev/mapper/vg_dev-lv_root on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/vda1 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) Output of du -s /home: 0 /home Output of stat /home: File: `/home' Size: 0 Blocks: 0 IO Block: 1024 directory Device: 15h/21d Inode: 34913 Links: 2 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2011-02-07 03:45:46.188995765 -0800 Modify: 2011-02-07 03:11:59.980995019 -0800 Change: 2011-02-06 07:58:45.874995002 -0800

  Read the article

• Starting programs from terminal then exiting terminal exits started programs?

  - by sherrellbc

  I really was unsure how to phrase the question title. What I mean is that when I use the terminal to start a program, most of the time when the terminal is closed it also exits the programs started from it. Now this makes sense if we look at it from a hierarchical standpoint of the terminal being the parent process which spawns child processes, and any halt of the parent causes subsequent halting of the children as well. However, I've noticed this to not always be the case. For example, I downloaded Sublime Text Editor and created a symlink in PATH. I can start this program by issuing a sublime command from the terminal, but subsequent closure of the terminal program does nothing to sublime. However, other times either the child process that was started it also closed or it hangs up and causes problems. tl;dr: Is it always the case that programs started from a closed parent process will be closed when the parent is exited? And if so, is there way to start a program from the terminal and then close the terminal without exiting the started process? The whole point here is to start programs from the terminal so I do not overly-populate my desktop with symlinks.

  Read the article

• Which programming idiom to choose for this open source library?

  - by Walkman

  I have an interesting question about which programming idiom is easier to use for beginner developers writing concrete file parsing classes. I'm developing an open source library, which one of the main functionality is to parse plain text files and get structured information from them. All of the files contains the same kind of information, but can be in different formats like XML, plain text (each of them is structured differently), etc. There are a common set of information pieces which is the same in all (e.g. player names, table names, some id numbers) There are formats which are very similar to each other, so it's possible to define a common Base class for them to facilitate concrete format parser implementations. So I can clearly define base classes like SplittablePlainTextFormat, XMLFormat, SeparateSummaryFormat, etc. Each of them hints the kind of structure they aim to parse. All of the concrete classes should have the same information pieces, no matter what. To be useful at all, this library needs to define at least 30-40 of these parsers. A couple of them are more important than others (obviously the more popular formats). Now my question is, which is the best programming idiom to choose to facilitate the development of these concrete classes? Let me explain: I think imperative programming is easy to follow even for beginners, because the flow is fixed, the statements just come one after another. Right now, I have this: class SplittableBaseFormat: def parse(self): "Parses the body of the hand history, but first parse header if not yet parsed." if not self.header_parsed: self.parse_header() self._parse_table() self._parse_players() self._parse_button() self._parse_hero() self._parse_preflop() self._parse_street('flop') self._parse_street('turn') self._parse_street('river') self._parse_showdown() self._parse_pot() self._parse_board() self._parse_winners() self._parse_extra() self.parsed = True So the concrete parser need to define these methods in order in any way they want. Easy to follow, but takes longer to implement each individual concrete parser. So what about declarative? In this case Base classes (like SplittableFormat and XMLFormat) would do the heavy lifting based on regex and line/node number declarations in the concrete class, and concrete classes have no code at all, just line numbers and regexes, maybe other kind of rules. Like this: class SplittableFormat: def parse_table(): "Parses TABLE_REGEX and get information" # set attributes here def parse_players(): "parses PLAYER_REGEX and get information" # set attributes here class SpecificFormat1(SplittableFormat): TABLE_REGEX = re.compile('^(?P<table_name>.*) other info \d* etc') TABLE_LINE = 1 PLAYER_REGEX = re.compile('^Player \d: (?P<player_name>.*) has (.*) in chips.') PLAYER_LINE = 16 class SpecificFormat2(SplittableFormat): TABLE_REGEX = re.compile(r'^Tournament #(\d*) (?P<table_name>.*) other info2 \d* etc') TABLE_LINE = 2 PLAYER_REGEX = re.compile(r'^Seat \d: (?P<player_name>.*) has a stack of (\d*)') PLAYER_LINE = 14 So if I want to make it possible for non-developers to write these classes the way to go seems to be the declarative way, however, I'm almost certain I can't eliminate the declarations of regexes, which clearly needs (senior :D) programmers, so should I care about this at all? Do you think it matters to choose one over another or doesn't matter at all? Maybe if somebody wants to work on this project, they will, if not, no matter which idiom I choose. Can I "convert" non-programmers to help developing these? What are your observations? Other considerations: Imperative will allow any kind of work; there is a simple flow, which they can follow but inside that, they can do whatever they want. It would be harder to force a common interface with imperative because of this arbitrary implementations. Declarative will be much more rigid, which is a bad thing, because formats might change over time without any notice. Declarative will be harder for me to develop and takes longer time. Imperative is already ready to release. I hope a nice discussion will happen in this thread about programming idioms regarding which to use when, which is better for open source projects with different scenarios, which is better for wide range of developer skills. TL; DR: Parsing different file formats (plain text, XML) They contains same kind of information Target audience: non-developers, beginners Regex probably cannot be avoided 30-40 concrete parser classes needed Facilitate coding these concrete classes Which idiom is better?

  Read the article

• Designing an email system to guarantee delivery

  - by GlenH7

  We are looking to expand our use of email for notification purposes. We understand it will generate more inbox volume, but we are being selective about which events we fire notification on in order to keep the signal-to-noise ratio high. The big question we are struggling with is designing a system that guarantees that the email was delivered. If an email isn't delivered, we will consider that an exception event that needs to be investigated. In reality, I say almost guarantees because there aren't any true guarantees with email. We're just looking for a practical solution to making sure the email got there and experiences others have had with the various approaches to guaranteeing delivery. For the TL;DR crowd - how do we go about designing a system to guarantee delivery of emails? What techniques should we consider so we know the emails were delivered? Our biggest area of concern is what techniques to use so that we know when a message is sent out that it either lands in an inbox or it failed and we need to do something else. Additional requirements: We're not at the stage of including an escalation response, but we'll want that in the future or so we think. Most notifications will be internal to our enterprise, but we will have some notifications being sent to external clients. Some of our application is in a hosted environment. We haven't determined if those servers can access our corporate email servers for relaying or if they'll be acting as their own mail servers. Base design / modules (at the moment): A module to assign tracking identification A module to send out emails A module to receive delivery notification (perhaps this is the same as the email module) A module that checks sent messages against delivery notification and alerts on undelivered email. Some references: Atwood: Send some email Email Tracking Some approaches: Request a response (aka read-receipt or Message Disposition Notification). Seems prone to failure since we have cross-compatibility issues due to differing mail servers and software. Return receipt (aka Delivery Status Notification). Not sure if all mail servers honor this request or not Require an action and therefore prove reply. Seems burdensome to force the recipients to perform an additional task not related to resolving the issue. And no, we haven't come up with a way of linking getting the issue fixed to whether or not the email was received. Force a click-through / Other site sign-in. Similar to requiring some sort of action, this seems like an additional burden and will annoy the users. On the other hand, it seems the most likely to guarantee someone received the notification. Hidden image tracking. Not all email providers automatically load the image, and how would we associate the image(s) with the email tracking ID? Outsource delivery. This gets us out of the email business, but goes back to how to guarantee the out-sourcer's receipt and subsequent delivery to the end recipient. As a related concern, there will be an n:n relationship between issue notification and recipients. The 1 issue : n recipients subset isn't as much of a concern although if we had a delivery failure we would want to investigate and fix the core issue. Of bigger concern is n issues : 1 recipient, and we're specifically concerned in making sure that all n issues were received by the recipient. How does forum software or issue tracking software handle this requirement? If a tracking identifier is used, Where is it placed in the email? In the Subject, or the Body?

  Read the article

• SQL SERVER – Attach mdf file without ldf file in Database

  - by pinaldave

  Background Story: One of my friends recently called up and asked me if I had spare time to look at his database and give him a performance tuning advice. Because I had some free time to help him out, I said yes. I asked him to send me the details of his database structure and sample data. He said that since his database is in a very early stage and is small as of the moment, so he told me that he would like me to have a complete database. My response to him was “Sure! In that case, take a backup of the database and send it to me. I will restore it into my computer and play with it.” He did send me his database; however, his method made me write this quick note here. Instead of taking a full backup of the database and sending it to me, he sent me only the .mdf (primary database file). In fact, I asked for a complete backup (I wanted to review file groups, files, as well as few other details).  Upon calling my friend,  I found that he was not available. Now,  he left me with only a .mdf file. As I had some extra time, I decided to checkout his database structure and get back to him regarding the full backup, whenever I can get in touch with him again. Technical Talk: If the database is shutdown gracefully and there was no abrupt shutdown (power outrages, pulling plugs to machines, machine crashes or any other reasons), it is possible (there’s no guarantee) to attach .mdf file only to the server. Please note that there can be many more reasons for a database that is not getting attached or restored. In my case, the database had a clean shutdown and there were no complex issues. I was able to recreate a transaction log file and attached the received .mdf file. There are multiple ways of doing this. I am listing all of them here. Before using any of them, please consult the Domain Expert in your company or industry. Also, never attempt this on live/production server without the presence of a Disaster Recovery expert. USE [master] GO -- Method 1: I use this method EXEC sp_attach_single_file_db @dbname='TestDb', @physname=N'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\TestDb.mdf' GO -- Method 2: CREATE DATABASE TestDb ON (FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\TestDb.mdf') FOR ATTACH_REBUILD_LOG GO Method 2: If one or more log files are missing, they are recreated again. There is one more method which I am demonstrating here but I have not used myself before. According to Book Online, it will work only if there is one log file that is missing. If there are more than one log files involved, all of them are required to undergo the same procedure. -- Method 3: CREATE DATABASE TestDb ON ( FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\TestDb.mdf') FOR ATTACH GO Please read the Book Online in depth and consult DR experts before working on the production server. In my case, the above syntax just worked fine as the database was clean when it was detached. Feel free to write your opinions and experiences for it will help the IT community to learn more from your suggestions and skills. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, Readers Question, SQL, SQL Authority, SQL Backup and Restore, SQL Data Storage, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• They may block off Howard Street—but Oracle OpenWorld is a two-way street.

  - by Oracle Accelerate for Midsize Companies

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 by Jim Lein, Sr. Director, Oracle Accelerate for Midsize Companies “Engineered to Inform and Inspire”—that’s the theme of Oracle OpenWorld 2012. In early October, tens of thousands of attendees will descend on the streets of San Francisco because they share one thing in common: the desire to learn more about Oracle. You might think that’s the way we, Oracle employees, look at this event—as just another opportunity for attendees to learn about what we do. But it’s really a two way street. Every year I’m amazed by how informed and inspired I am by our customers and their companies. Midsize companies buy Oracle to grow. As part of the Oracle Accelerate for Midsize Companies team I get to talk with our partners and business leaders at growing companies almost every day, usually via phone. Oracle OpenWorld presents the perfect opportunity to meet some of them in person, in an informal setting, and in one of the most beautiful cities in the world. The stories our customers tell me about their businesses provide vivid examples of how they have overcome the challenges of managing increasingly complex global operations and growing during uncertain economic conditions. It’s no secret that my favorite session at Oracle OpenWorld (besides Larry Ellison’s keynotes and the Customer Appreciation Event, of course) is the Oracle Accelerate Customer Panel. This year we’re featuring executives from three companies who deployed Oracle ERP rapidly to support their company’s growth: Chris Powell, VP and Corporate Controller of Beats by Dr. Dre, a California based designer and manufacturer of premium headphones (sorry, no free samples), Iñaki Zuazo, CIO of Industrias Juno, a building materials provider based in Spain, Kamran Moosa, Project Coordinator for Spartan Engineering, a provider of engineering and construction support services for an LPG storage project in Texas, and That’s a pretty diverse lineup and it will be interesting to hear the perspectives of both IT and financial project stakeholders. The session, “Oracle Accelerate Customer Case Studies: Rapid Deployment of Oracle Applications”, is at 3:30 pm on Wednesday, October 3, in the Concert room at the Palace Hotel. Oracle loves our hometown of San Francisco and it’s a great place to host Oracle OpenWorld. It’s now San Francisco’s largest conference and the city closes off Howard Street to better accommodate the attendees. Some Bay Area commuters may be inconvenienced for a few days by this closure but the conference brings about $100 million into the local economy. Now that’s a two-way street. More Oracle Accelerate at Oracle OpenWorld “Faster, Better, Cheaper Application Deployment with Oracle Business Accelerators”, Monday, October 1st, 10:45 a.m., Moscone West Room 3016 “Oracle Accelerate and Oracle Business Accelerators for Midsize Companies”, (partners only), Wednesday, October 3, 10:15 a.m., Marriott – Golden Gate B Visit the Oracle Accelerate and Oracle Business Accelerator Kiosk in the Moscone West Exhibit Grounds Download the Focus On Oracle Accelerate for Midsize Companies Focus document /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >