Search Results

Search found 3985 results on 160 pages for 'hd dvd'.

Page 45/160 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

  • Windows 7 sata disk not recognized after wake up from sleep state

    - by Gabber
    My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results. I also tried all the suggestions from this question Why doesn't Windows 7 wake up from sleep?. Still no results.

    Read the article

  • "Disk Not Found" Error when trying to install iso image of CentOs on ESXI using VSphere

    - by kamal
    When trying to install CentOs setup as an iso image on datastore, i get an error : "Disk Not Found". I am using ESXi 4.1 as host VM. Is there a way to attach DVD/CD as iso image ? I tried "Connect at Power on" Checked and Connect CD/DVD on the VSphere Console, but i still am unable ot get the iso image recognized as a DVD mounted image: Solved: if i look at the image size, it was 11 MB, so it WAS a boot iso, but nithing else, if we compare it with other boot images with complete iso's therein lies the solution. This boot.iso was from rBUILD/Conary packaging

    Read the article

  • Running RAID on an internal storage drive

    - by Johnny W
    I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to put my documents on a "normal" HD running under RAID 1. I have four SATA 3GB/s ports on my motherboard (my Windows 8 SSD drive in on a different 6GB/s controller). All four are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive. In my BIOS I can only change settings for the entire controller, not just ports. So my question is: If I turn these four ports into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will a HD or Bluray drive be slower/incompatible with being plugged into a non AHCI SATA port? Thanks.

    Read the article

  • External Hard Disk's secter could not be read ?

    - by mgpyone
    I've an 500 GB Seagate External Hard Disk (NTFS) . Currently, I can't open it at Windows. Thus, I've tired with chkdsk command .. but still it stopped and can't continue checking disk.. Also I've tired with fsck on Mac . Then, it shows me the Error .. /Volumes/<HD Name>/ is not a character device CONTINUE? yes /Volumes/<HD Name>/ (NO WRITE) CANNOT READ: BLK 16 CONTINUE? yes THE FOLLOWING DISK SECTORS COULD NOT BE READ: 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, ioctl (GCINFO): Inappropriate ioctl for device fsck: /Volumes/<HD Name>/: can't read disk label The volume I've used is around 300 GB , Thus, it's hard to back up and format again . Thus, any helpful suggestions and solutions will be appreciated pretty well.

    Read the article

  • What's the easiest way to upgrade a single laptop hard drive?

    - by rutherford
    My HD is coming near the end of it's life and I wondered if producing an image of the original was all that was required? What's the best software to use for this and how can I accomplish it - can I use my other laptop for the image file or do I need to buy an external HD to accomplish the clone? Does having several partitions of both FAT32 and NTFS with partition magic installed affect things at all? Is it just a matter of making the image, swapping in the new HD and copying the image to that?

    Read the article

  • DELL U2410 Monitor(Display Port) & Graphic card

    - by Anj
    I was looking for a 24" monitor and bought the Dell 24" inch ultra sharp monitor which has DisplayPort( new keyword for me) seems it is equivalent to HDMI. Now I would like to enhance the display capabilities for my laptop and desktop(both have VGA output as of now). Couple of questions in mind: Is there a single HD graphic card which i could use for both desktop and laptop? I understand it has to be external but if its costly then I would stick on internal graphic card for my desktop. Please recommend external if its cost effective else I would go for internal one(Budget is around $70 or Rs 4000. Is there a HD card which I could use for both HD video and 5.1 channel audio output? I generally use the computer for office work/ listening music and watching movies, not gaming.

    Read the article

  • Using external monitor and screen resolution?

    - by Johnydep
    it might sound very basic question but i need some help. I have lenovo Ideapad y560p which offers a maximum resolution of 1366px x 768px. Now i am planning to buy an external monitor, and i short listed some FULL HD resolution monitors, but it is my understanding that even with FULL HD, i would only achieve the best resolution my laptop supports. Is it true? And also if this is the case, should i really go for an HD monitor or settle down with a lower resolution version? 2ndly, is there any way to increase resolution with simple upgrade? or it is not possible without voiding the warranty??

    Read the article

  • How to setup KVM partitioning?

    - by Richard
    I'm trying to install SolusVM/KVM on a server with one 500 GB HD and one 256 SSD. I am a complete beginner at Linux. SolusVM has a script on the site to download and install automatically, but how do I specify to install the script on the 500 GB HD and put the virtual machines on the SSD? And how should my partitioning look like? I want KVM isos and stuff on HD and virtual machines on SSD. Thanks a lot.

    Read the article

  • sql perfomance on new server

    - by Rapunzo
    My database is running on a pc (AMD Phenom x6, intel ssd disk, 8GB DDR3 RAM and windows 7 OS + sql server 2008 R2 sp3 ) and it started working hard, timeout problems and up to 30 seconds long queries after 200 mb of database And I also have an old server pc (IBM x-series 266: 72*3 15k rpm scsi discs with raid5, 4 gb ram and windows server 2003 + sql server 2008 R2 sp3 ) and same query start to give results in 100 seconds.. I tried query analyser tool for tuning my indexed. but not so much improvements. its a big dissapointment for me. because I thought even its an old server pc it should be more powerfull with 15k rpm discs with raid5. what should I do. do I need $10.000 new server to get a good performance for my sql server? cant I use that IBM server? Extra information: there is 50 sql users and its an ERP program. There is my query ALTER FUNCTION [dbo].[fnDispoTerbiye] ( ) RETURNS TABLE AS RETURN ( SELECT MD.dispoNo, SV.sevkNo, M1.musteriAdi AS musteri, SD.tipTurId, TT.tipTur, SD.tipNo, SD.desenNo, SD.varyantNo, SUM(T.topMetre) AS toplamSevkMetre, MD.dispoMetresi, DT.gelisMetresi, ISNULL(DT.fire, 0) AS fire, SV.sevkTarihi, DT.gelisTarihi, SP.mamulTermin, SD.miktar AS siparisMiktari, M.musteriAdi AS boyahane, MD.akisNotu AS islemler, --dbo.fnAkisIslemleri(MD.dispoNo) DT.partiNo, DT.iplikBoyaId, B.tanimAd AS BoyaTuru, MAX(HD.hamEn) AS hamEn, MAX(HD.hamGramaj) AS hamGramaj, TS.mamulEn, TS.mamulGramaj, DT.atkiCekmesi, DT.cozguCekmesi, DT.fiyat, DV.dovizCins, DT.dovizId, (SELECT CASE WHEN DT.dovizId = 2 THEN CAST(round(SUM(T .topMetre) * DT.fiyat * (SELECT TOP 1 satis FROM tblKur WHERE dovizId = 2 ORDER BY tarih DESC), 2) AS numeric(18, 2)) WHEN DT.dovizId = 3 THEN CAST(round(SUM(T .topMetre) * DT.fiyat * (SELECT TOP 1 satis FROM tblKur WHERE dovizId = 3 ORDER BY tarih DESC), 2) AS numeric(18, 2)) WHEN DT.dovizId = 1 THEN CAST(round(SUM(T .topMetre) * DT.fiyat * (SELECT TOP 1 satis FROM tblKur WHERE dovizId = 1 ORDER BY tarih DESC), 2) AS numeric(18, 2)) END AS Expr1) AS ToplamTLfiyat, DT.aciklama, MD.dispoNotu, SD.siparisId, SD.siparisDetayId, DT.sqlUserName, DT.kayitTarihi, O.orguAd, 'Çözgü=(' + (SELECT dbo.fnTipIplikler(SD.tipTurId, SD.tipNo, SD.desenNo, SD.varyantNo, 1) AS Expr1) + ')' + ' Atki=(' + (SELECT dbo.fnTipIplikler(SD.tipTurId, SD.tipNo, SD.desenNo, SD.varyantNo, 2) AS Expr1) + ')' AS iplikAciklama, DT.prosesOk, dbo.[fnYikamaTalimat](SP.siparisId) yikamaTalimati FROM tblDoviz AS DV WITH(NOLOCK) INNER JOIN tblDispoTerbiye AS DT WITH(NOLOCK) INNER JOIN tblTanimlar AS B WITH(NOLOCK) ON DT.iplikBoyaId = B.tanimId AND B.tanimTurId = 2 ON DV.id = DT.dovizId RIGHT OUTER JOIN tblMusteri AS M1 WITH(NOLOCK) INNER JOIN tblSiparisDetay AS SD WITH(NOLOCK) INNER JOIN tblDispo AS MD WITH(NOLOCK) ON SD.siparisDetayId = MD.siparisDetayId INNER JOIN tblTipTur AS TT WITH(NOLOCK) ON SD.tipTurId = TT.tipTurId INNER JOIN tblSiparis AS SP WITH(NOLOCK) ON SD.siparisId = SP.siparisId ON M1.musteriNo = SP.musteriNo INNER JOIN tblTip AS TP WITH(NOLOCK) ON SD.tipTurId = TP.tipTurId AND SD.tipNo = TP.tipNo AND SD.desenNo = TP.desen AND SD.varyantNo = TP.varyant INNER JOIN tblOrgu AS O WITH(NOLOCK) ON TP.orguId = O.orguId INNER JOIN tblMusteri AS M WITH(NOLOCK) INNER JOIN tblSevkiyat AS SV WITH(NOLOCK) ON M.musteriNo = SV.musteriNo INNER JOIN tblSevkDetay AS SVD WITH(NOLOCK) ON SV.sevkNo = SVD.sevkNo ON MD.mamulDispoHamSevkno = SV.sevkNo LEFT OUTER JOIN tblTop AS T WITH(NOLOCK) INNER JOIN tblDispo AS HD WITH(NOLOCK) ON T.dispoNo = HD.dispoNo AND T.dispoTuruId = HD.dispoTuruId ON SVD.dispoTuruId = T.dispoTuruId AND SVD.dispoNo = T.dispoNo AND SVD.topNo = T.topNo AND MD.siparisDetayId = HD.siparisDetayId ON DT.dispoTuruId = MD.dispoTuruId AND DT.dispoNo = MD.dispoNo LEFT OUTER JOIN tblDispoTerbiyeTest AS TS WITH(NOLOCK) ON DT.dispoTuruId = TS.dispoTuruId AND DT.dispoNo = TS.dispoNo --WHERE DT.gelisTarihi IS NULL -- OR DT.gelisTarihi > GETDATE()-30 GROUP BY MD.dispoNo, DT.partiNo, DT.iplikBoyaId, TS.mamulEn, TS.mamulGramaj, DT.gelisMetresi, DT.gelisTarihi, DT.atkiCekmesi, DT.cozguCekmesi, DT.fire, DT.fiyat, DT.aciklama, DT.sqlUserName, DT.kayitTarihi, SD.tipTurId, TT.tipTur, SD.tipNo, SD.desenNo, SD.varyantNo, SD.siparisId, SD.siparisDetayId, B.tanimAd, M.musteriAdi, M.musteriAdi, M1.musteriAdi, O.orguAd, TP.iplikAciklama, SD.miktar, MD.dispoNotu, SP.mamulTermin, DT.dovizId, DV.dovizCins, MD.dispoMetresi, MD.akisNotu, SV.sevkNo, SV.sevkTarihi, DT.prosesOk,SP.siparisId )

    Read the article

  • Buy HTC HD7 Windows Phone 7 From Airtel In India @ Rs. 29990

    - by Gopinath
    Are you looking for HTC HD 7 Windows Phone 7 in India? Head over to Airtel showroom near you to grab one. Airtel in partnership with HTC is offering HD 7 Windows Phone 7 for Rs. 29990 and users will get 2 GB of data usage for 6 months at Rs. 300. Mr. Shireesh Joshi, CMO-Mobile Services of Bharti Airtel,  in a press conference says We are delighted with the opportunity to bring the eagerly-awaited HTC HD7 Smartphone in India. Combining the strength of the airtel brand and network with the innovation and design of HTC and the great user-interface of Windows Phone 7, we are happy to bring another first for our customers that will take mobile communications to a whole new level. The HD7 has a 4.3-inch display, kickstand to rest your phone on a table, 5MP autofocus camera that allows you to record 720p videos, 1GHz processor, 576MB of RAM and has 16GB of internal memory. Even though this is the official launch of HTC HD7 in India, this phone is available in the market for quite sometime at an approximate price of Rs. 27000/-. So it’s your call to decide whether buy it at HTC authorized retailers like Airtel for Rs.29K  or in the market for Rs 27K. HTC HD 7 Promo Video Thanks Fonearena This article titled,Buy HTC HD7 Windows Phone 7 From Airtel In India @ Rs. 29990, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • How can I recover data after mistakenly clean-installed 12.04 over 11.10?

    - by T.Kannan
    I recently got a Ubuntu 12.04 LTS i386 DVD Rom and Ubuntu 12.04 LTS alternate cd from the zyxware.com because I don't have a broadband personal connection at home, I am using only the office INTERNET. I have a Dell Inspiron Laptop core 2 duo Processor with 2GB Ram dual boot of Ubuntu 11.10 and Windows Vista. I tried to upgrade My existing fully equipped streamlined Ubuntu 11.10 OS with lot of documents and socialized application packages which have been frequently used by me for the last one year. First I tried to install upgradation from the Ubuntu 12.04 LTS alternate cd while ubuntu 11.10 is on, but every time I got a error message and I couldn't upgrade either thro desktop or through terminal. Then I tried Ubuntu 12.04 LTS i386 DVD the boot option to DVD, I tried to upgrade from existing 11.10 to 12.04 LTS Option, then Upgrading Installation started well and finally got a message Installation completed successfully, Asked for reboot, I rebooted then I have hot a Ubuntu 12.04 LTS Login and I logged on, I have got a big shock that there is everything washed away in the home folders ( all datas, Music collections and vedios etc), all the application installed early in 11.10 were gone nothing left. Now I have got only 12.04 LTS, even It is asking for me to update around 350 mb through net connection. How It was a crazy Ubuntu, It is not a up-gradation, new installation is not it? I loosed everthing, at the end I got the same desktop screen like Ubuntu 11.10. Anybody knows about what gone wrong and if any possibility to recover my datas? Please help me. I want to Know that which method is stable to Upgrade existing Ubunt11.10

    Read the article

  • HP ProBook 4720s UEFI boot only manually into 12.04

    - by HainjeDAF
    I'm trying to get UEFI boot on my ProBook 4720s. Because I swapped the HDD for a SSD I had a blank canvas to start. The 12.04 Live DVD refuses to boot into UEFI, as do Alternate and desktop CD's. However, when I make a 16Gb flashdrive into a live FS using the bootdisk tool in ubuntu, I can boot from USB, manually into UEFI mode. It even sidesteps to DVD as medium when I boot from USB with 12.04 Live DVD present. I installed a GPT partitiontable with part 1, label EFI, fs FAT32, flag BOOT, mounts at /boot/efi part 2, label Linux-ROOT, fs ext4, no flags, mounts at / part 3, label Linux-SWAP, fs swap, no flags, mounts as swap So far, My system refuses to boot from harddrive by itself. I have to select "Boot from EFI file" and manually browse to (HD0,GPT1)\EFI\ubuntu\grubx64.efi any other option ends in "no system disk, please insert boot disk" I tried installing BURG, but that merely enforces non-efi boot. I tried most of the solutions I could find, but one says \EFI\grub\grub.cfg next says \EFI\ubuntu\ubuntu,cfg I'm confused and getting frustrated. How do I correctly install Ubuntu 12.04 in UEFI mode on this machine???

    Read the article

  • Drivers for NVIDIA 520M not working in Ubuntu 12.04

    - by Don
    I am aware that this is nominally a duplicate question, however I've read the other questions and haven't been able to resolve my problem after many hours and attempts, so please don't delete it. Additionally, it seems like many answers to the other questions are specifically dependent on certain situations. My situation being different from the others I found represented, here's my question. Until last night, I had Ubuntu 12.04 installed with Wubi, and it ran ok, though slowly and with occasional hangs. So I partitioned the drive and installed 12.04 in its own partition. Now when I start it, I am stuck using 2D. I believe this is an NVIDIA bug. My NVIDIA card is a GT 520M and my machine has Optimus. Additional Drivers only displays my wireless driver. Going to System Settings Details Graphics shows Driver:Unknown, Experience:Standard. I downloaded the driver from the NVIDIA website, and ran the installer with no errors, except that the "distribution-provided pre-install script failed". After rebooting, my screen was stuck at 640X480, which was fixed by editing /etc/X11/xorg.conf However, I still was stuck in 2D, and nothing else had changed either. A thread suggested something called Bumblebee. I tried that, and when I ran optirun firefoxI got a frozen blank screen. Following another suggestion, I checked the BIOS to try and disable Optimus. I found and ran myriad other commands to try and fix the problem and nothing changed. Now I have just done a clean re-install of Ubuntu. From there, I: Installed all the updates Downloaded the NVIDIA driver Installed it Got screen stuck at 640X480, fixed in xorg.conf. To recap the problem: I can't get the NVIDIA drivers working I am stuck using 2D I'm an idiot I think if the first one is solved, the solution to the second will naturally follow. If you need me to provide any other information, I'd be happy to. From what I've seen in other threads, I think this information may help: lsmod: dh@donsMachine:~$ lsmod Module Size Used by nvidia 12353161 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event lib80211_crypt_tkip 17390 0 wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device psmouse 87692 0 serio_raw 13211 0 i915 468745 2 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 drm 242038 3 i915,drm_kms_helper mei 41616 0 i2c_algo_bit 13423 1 i915 mxm_wmi 12979 0 acer_wmi 28418 0 sparse_keymap 13890 1 acer_wmi video 19596 1 i915 wmi 19256 2 mxm_wmi,acer_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp tg3 152032 0 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci lspci -nn | grep VGA dh@donsMachine:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0df7] (rev a1) lshw dh@donsMachine:~$ sudo lshw [sudo] password for dh: donsmachine description: Notebook product: EasyNote TS44HR () vendor: Packard Bell version: V1.12 serial: LXBWZ02017134209D71601 width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=notebook uuid=16FE576B-CA15-11E0-B096-B870F4E51243 *-core description: Motherboard product: SJV50_HR vendor: Packard Bell physical id: 0 version: Base Board Version serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Packard Bell physical id: 0 version: V1.12 date: 07/11/2011 size: 1MiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 0 serial: 598E126E slot: ChannelA-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM [empty] physical id: 1 slot: ChannelA-DIMM1 *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 2 serial: 159E126C slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: DIMM [empty] physical id: 3 slot: ChannelB-DIMM1 *-cpu description: CPU product: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz vendor: Intel Corp. physical id: 2e bus info: cpu@0 version: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz slot: CPU1 size: 2GHz capacity: 4GHz width: 64 bits clock: 1333MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 30 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache:1 description: L2 cache physical id: 31 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L3 cache physical id: 32 slot: L3 Cache size: 3MiB capacity: 3MiB capabilities: synchronous internal write-through unified *-cache description: L1 cache physical id: 2f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:d0000000-d10fffff ioport:a0000000(size=301989888) *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) memory:d1000000-d107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:d1400000-d17fffff memory:c0000000-cfffffff ioport:3000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:42 memory:d1a04000-d1a0400f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:d1a0a000-d1a0a3ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d1a00000-d1a03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:9fb00000-9fbfffff ioport:d1800000(size=1048576) *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: b8:70:f4:e5:12:43 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb latency=0 link=no multicast=yes port=twisted pair resources: irq:16 memory:d1830000-d183ffff memory:d1840000-d184ffff memory:d1850000-d18507ff *-generic:0 description: SD Host controller product: NetXtreme BCM57765 Memory Card Reader vendor: Broadcom Corporation physical id: 0.1 bus info: pci@0000:02:00.1 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=sdhci-pci latency=0 resources: irq:17 memory:d1800000-d180ffff *-generic:1 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.2 bus info: pci@0000:02:00.2 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1810000-d181ffff *-generic:2 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.3 bus info: pci@0000:02:00.3 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1820000-d182ffff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d1900000-d19fffff *-network description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 68:a3:c4:44:81:96 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.12 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d1900000-d1903fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:d1a09000-d1a093ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 04 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:3098(size=8) ioport:30bc(size=4) ioport:3090(size=8) ioport:30b8(size=4) ioport:3060(size=32) memory:d1a08000-d1a087ff *-disk description: ATA Disk product: ST9500325AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0001 serial: S2W1AMSX size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=a45f21e9 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 46aa-2a25 size: 19GiB capacity: 20GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:00 filesystem=ntfs label=PQSERVICE state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 10aa-ad1a size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=SYSTEM RESERVED state=clean *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 668c5afc-182e-ff4b-b084-3cc09f54972d size: 395GiB capacity: 395GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=Don's Machine state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 49GiB capacity: 49GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 3945MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RW DVRTD11RS vendor: PIONEER physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d1a06000-d1a060ff ioport:3040(size=32) *-power UNCLAIMED description: OEM_Define1 product: OEM_Define5 vendor: OEM_Define2 physical id: 1 version: OEM_Define6 serial: OEM_Define3 capacity: 75mWh *-battery description: Lithium Ion Battery product: CRB Battery 0 vendor: -Virtual Battery 0- physical id: 2 version: 10/12/2007 serial: Battery 0 slot: Fake

    Read the article

  • How to create an Ubuntu 12.10 live CD?

    - by B Biswas
    I downloaded the Ubuntu 12.10 installer from Ubuntu website. However, I find that it is not an iso image and I am unable to create a live CD (or DVD) from it. I could not find any help from Ubuntu website as well as internet. Please help. PS - My OS is Windows XP. The Ubuntu installer I downloaded from Ubuntu website is a zip file. I unzipped the file and it has a wubi file. PS - Thanks. I could create a Live CD. 1) First I tried to do it in my laptop which has Win 7. It was showing the Ubuntu installer as a zip file and could not able to burn it in to a DVD. At that time I raised the question. 2) Later I copied the installer in my desktop which has Win XP. There the installer is shown as an ISO file and I burnt it in to a DVD and created the Live CD. This is working nicely in the the desktop. 3) I tried to run the Live Cd in my Laptop which is an AMD machine, the system does not boot up. 4) In my office desktop which has Win 7 the Ubuntu installer is showing as an ISO file. My questions are as follows: A) Why the Ubuntu installer file is showing differently in different machines? B) Why the Live CD is not working in my Laptop?

    Read the article

  • Acer Aspire One 725 - missing graphic card driver?

    - by Melon
    Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

    Read the article

  • XOLO X900–First mobile phone with Intel Power

    - by Rekha
    XOLO X900, XOLO’s offering the world’s first smart phone with the power of Intel inside® shaking hands with LAVA International Ltd., India’s fastest growing handset brands. The R&D Centre is in Shenzhan (China) and Bangalore (India). The smart phone has a fast web browsing with the 1.6 GHz Intel processor and smooth multi-tasking process using Intel patented Hyper Threading technology.It has an optimum battery usage, 4.03” hi-resolution of 1024X600 pixels LCD screen to ensure crisp text and vibrant images, HDMI Output port for TV, full HD 1080p playback and dual speakers. It has a camera of 8MP HD camera with certain DSLR like features allowing to click upto 10 photos in less than a second. 3D and HD gaming is immensely realistic with 400 MHz Graphics Processing Unit. The Operating System used here is Android 2.3 (Gingerbread) and upgradable to Android 4.0. It has the GPS facility and rear and front cameras with 8MP and 1.3MP respectively.  They have enabled Accelerometer, Gyroscope, Magnetometer, Ambient light sensor and Proximity sensor in this smart phone. Intel’s smartphone venture is beginning in India first. It is said to be available for sale in Indian from April 23, 2011 onwards. The price is at a best-buy price of INR 22,000 approximately. The smartphone will be available at the Indian retail chain Croma. The phone will available in other retail stores and online stores from early May. The company is launching the smartphone in India first and a more powerful handset in China later this year. According to their success in India and China, Intel is planning to come into Europe and US market. Till then, Intel smartphones are only for Indian buyers. You can more technical information from the XOLO’s site.

    Read the article

  • Add Windows 7 to boot menu

    - by Cumatru
    Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS - system restore /dev/sda2 13 4674 37436416 7 HPFS/NTFS - Windows 7 /dev/sda3 4674 58843 435116032 7 HPFS/NTFS - data storage /dev/sda4 58843 60802 15728640 83 Linux - Ubuntu 10.10 Initially i´ve installed StartUpManager. This ( i think ) added another 4 instances of Linux + memtest to my boot menu list. Altough, i din´t see any boot menu. It boots into Ubuntu after a few seconds. I´ve tried to add windows 7, but i did not succeed. This is a part of my menu.lst file. title Ubuntu 10.10, kernel 2.6.35-24-generic uuid 1c9748e2-2f11-4a6c-91c0-7310d48c4a7a kernel /boot/vmlinuz-2.6.35-24-generic root=UUID=1c9748e2-2f11-4a6c-91c0-7310d48c4a7a ro quiet splash initrd /boot/initrd.img-2.6.35-24-generic title Chainload into GRUB 2 root 1c9748e2-2f11-4a6c-91c0-7310d48c4a7a kernel /boot/grub/core.img title Ubuntu 10.10, memtest86+ uuid 1c9748e2-2f11-4a6c-91c0-7310d48c4a7a kernel /boot/memtest86+.bin menuentry “Windows 7? { set root=(hd0,2) chainloader +1 } And this is after a upgrade-grub Searching for GRUB installation directory ... found: /boot/grub Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /boot/vmlinuz-2.6.35-24-generic Found kernel: /boot/vmlinuz-2.6.35-22-generic Found GRUB 2: /boot/grub/core.img Found kernel: /boot/memtest86+.bin Updating /boot/grub/menu.lst ... done Later Edit: Ive added the following in 40_custom from /etc/grub.d/ and ive decommented hidden menu line from menu.lst, but i still cant see any boot menu. Ive also tried to press ESC and SHIFT. menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod part_msdos insmod ntfs set root='(hd0,msdos0)' chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda1)" { set root= hd(0,0) chainloader +1 } menuentry "!Windows 7 (loader) (on /dev/sda1)" { set root= hd(0,1) chainloader +1 } menuentry "!!Windows 7 (loader) (on /dev/sda1)" { set root= hd(0,2) chainloader +1 }

    Read the article

  • Ubuntu impossible to install: "unable to find a medium containing a live filesystem"

    - by Lorenzo
    Yes, I have read questions and answers with similar titles for this issue, which prevented me from installing Ubuntu for several MONTHS now, trying to figure it out. I have a MacBookPro with triple partition (one for Mac Snow Leopard, one for Windows 7, one for Linux) created with reFIT firmware (not BootCamp). I set up the system according to these instructions for reFIT: http://lifehacker.com/5531037/how-to-triple+boot-your-mac-with-windows-and-linux-no-boot-camp-required Now. There is a free partition ready to accept Linux into its arms, but Linux does not want to participate. Most answers to the issue "unable to find a medium containing a live filesystem" point to changing the BIOS booting system (which I don't know how to do, especially using this reFIT booting system), and to changing the socket of the USB (which does not concern me, since I am using a CD, actually I tried with a CD, then with a DVD, since a blank CD is only 700MB while the iso image file of Ubuntu is about 731MB). Anyway. This is what happens: I am in the Mac system (using the Mac partition) I insert the DVD with the burned image of Ubuntu (yes I have tried burning it again and agin on both CD and DVD blank discs). I restart the computer. When reFIT loads, I hold down the ALT key until the CD image appears. I select it, and hit Enter. A small Ubuntu icon appears at the bottom of the screen. Then a Ubuntu sign appears in the middle of the screen with small dots underneath, lighting up progressively over and over to indicate it's loading. Then everything turns black and the following message appears, at the end of a few lines of text: "unable to find medium with live file system". Please provide very practical suggestions on what to do to an unexperienced wannabe Ubuntu very patient user. Please start by saying how do I access the BIOS setup from reFIT bootup, and exactly what and why I need to try and change. (Will this mess up my reFIT bootup?) And anything else I need to do to finally be able to install Ubuntu. Thanks

    Read the article

  • fglrx: No matching Device section for instance... found how to fix it?

    - by Lejo
    I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev from lispci i foud out finally, that my video card is in 01:00.0 slot. logically, if fglrx searches for a vdeo card device in a wrong place, it will not find it. 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4850] Thanks in advance.

    Read the article

  • Lubuntu Full Install on USB Drive with Full Disk Encryption and Grub2

    - by vivi
    I apologise for the wall of text, but I want you to scrutinize my thought-process to make sure there's no mistakes and no other way around it: I wish to have a full install of lubuntu with full disk encryption on one of my usb drives. The laptop I would be booting it from also has windows 7. I want to maintain that OS. From what I've read I must place grub2 on the usb drive so that: If I have the usb plugged in, the laptop would start lubuntu (having USB HD in the BIOS Boot options) If I don't have the usb plugged in, it would normally start windows 7. That's exactly what I want it to do. But: If I install from the normal .iso: Clicking "install lubuntu alongside them" would install it onto my normal HD. Clicking "Erase disk and install lunbuntu" would delete all the stuff I have in my HD and install lubuntu on it. Clicking "Something else" would allow me to choose to install lunbuntu and grub2 onto the usb drive, but would not provide it with encryption. So the normal .iso won't work for what I want. Then I found the alternate .iso and this tutorial: It allows me to install lubuntu with all the options I want and gives me the option to choose where to place the grub2! Hopefully there are no flaws in my train of thought. If there aren't, I have a few questions regarding that tutorial: The author says in his case choosing "Yes to install GRUB to your MBR" installed the grub to the usb drive's mbr. I can't have "in his case". I need to be sure that's what it will do, so that it doesn't mess up the windows boot loader. Choosing "no" would open this window and allow to choose where I want to install the grub. Unfortunately I don't understand which option I should type in the box to install it into the usb drive. Would removing my laptop's Hard Drive ensure that the grub is installed onto the usb drive if i picked first option, "yes"? I apologise once again for the wall of text and appreciate any help you guys can offer me.

    Read the article

  • Ubuntu sound volume is 40% lower than in Windows

    - by ncomx
    I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

    Read the article

  • Can I have a computer with 2 physical HDs, & Dual boot option, one for Windows & one for Ubuntu

    - by Frank
    When my HD failed in my old computer with a dual core, I immediately went out and bought a new 6 core PC because I needed it for business and had to have an immediate solution. The old computer was otherwise a good computer. I don't want to spend a $100+ for a new operating system for the old computer because the Windows 7 Professional opperating system for the new computer will only allow one install. So, I decided to look and see if there were any free operating systems and found Ubuntu. I downloaded it and burned a live CD and would like to try it on the old computer. I found a 200 GB HD I can buy for $30 and the seller will format it any way I want. There are also other HDs available at a similar price. What I was thinking I would like to do is buy 2 HDs. Then I can have one formatted for Ubuntu 12.04 and install Windows XP Pro SP1 on the other HD for which I have the original installation CD. Then I would like to have a dual boot option so that when I power up the computer, I can choose whether to use Windows XP or Ubuntu. Is this possible? If so, how would I do it, that is, arrange it so a dual boot option presents itself on power up.

    Read the article

  • alsa - sound issues on ubuntu 12.04

    - by tam_ubuuser
    i am having an sony E series laptop.i have an HDMI port .at this stage ,i have tested my sound card , which provides audio out on my laptop i.e i could hear songs .my laptop has two sound cards amd 5450 and an intel-hda(alsamixer shows that as s/pdif) . i decided to connect HDMI output to my new HD-TV.but, i could get only visuals on my TV,NO AUDIO OUTPUT ( HDMI cable works fine with win 7).my laptop has two sound cards.but i couldn't switch output to other card.( i don't know ,how to do that) i decided to update alsa. complied the following code in terminal. sudo apt-add-repository ppa:ubuntu-audio-dev/alsa-daily sudo apt-get update sudo apt-get install alsa-hda-dkms then,strangely no login sound, and no audio output on my laptop at all .then, started complied code from step1 sound troubleshooting procedure from offical ubuntu site.then, my speaker icon taskbar disappeared .obivously $aplay -l ,provided output as no soundcards detected . so , i implemented step 4 from that guide, it provides a output of all hardware devices in my laptop. *-multimedia UNCLAIMED description: Audio device product: Cedar HDMI Audio [Radeon HD 5400/6300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: latency=0 resources: memory:f0040000-f0043fff *-multimedia UNCLAIMED description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f5e00000-f5e03fff that command displayed output name of the two cards . but , still i have no positive output on $aplay -l. so therfore, i think alsa couldn't detect my sound cards . is there solution to this problem? it could be better,if alsa would channel output from multiple sound cards ? how should install and configure alsa such that detects HDMI cable as soon i connect to my HD tv? is it possible to alsa and pluseaudio 2.0 to co-exist, if so how?

    Read the article

  • 5 reason why you should upgrade to new iPad (3rd generation)

    - by Gopinath
    Apple released the new iPad, 3rd generation, couple of days ago and they will be available in stores from March 16 onwards.  It’s the best tablet available in the market and for first time buyers it’s a no brainer to choose it. What about the iPad owners? Should they upgrade their iPad 2 to the new iPad? This is the question on the lips of most of the iPad owners. In this post we will provide you 5 reasons why you should upgrade your iPad, if more than two reasons are convincing then you should upgrade to the new iPad. Retina display – The best display ever made for mobile device, a game changer The new iPad comes with Retina display with screen resolution of 2048 x 1536, which is twice the resolution of iPad 2. Undoubtedly the iPad 3’s display is the best display ever made for a mobile device and it’s a game changer. With better resolution on iPad 3 eBook reading is going to be a pleasure with clear and crisp text Watching HD movies on iPad is going to be unbelievably good The new Games targeted for Retina display are going to be more realistic and needless to explain the pleasure of playing such games Graphic artists and photo editors get a professional on screen rendering support to create beautiful graphics 2x Faster & 2x Memory – Better Games and powerful Apps The new iPad is more powerful with 2x faster graphics and 2x more memory. Apple claims that the A5x processor of new iPad is 2x faster than iPad 2 and 4x faster than the best graphic chips available from other vendors. The RAM of  new iPad  is upgraded to 1 GB compared from 512 MB of iPad 2. With the fast processor and more memory, Apps and games are going to be blazing fast. 4G Internet – Browse the web at the speeds of 42 MB/sec Half of the iPad owners are frequent commuters who access internet over cellular networks, the new iPad’s 4G LTE is going to be a big boom for their  high data access needs. With the new iPad’s 4G LTE connectivity you can browse the web at 42 MB/sec and it mean you can watch a HD video without buffering issues. iPad 2 comes with 3G network support and it’s browsing speeds are way less than the new iPad. 5MP Camera – HD Movie Recording & gorgeous Photography iPad 2 has a 0.7 mega pixel camera and the new iPad comes with 5 megapixels camera. That is a huge boost for hobbyist  photographers and videographers. With the new iPad you can shoot gorgeous photos and 1080p HD video. The iSight camera of new iPad uses advanced optics with features like auto exposure, auto focus and face detection up to 10 faces. Amazon Pays up to $300 for old iPad 2 16 GB Wifi and more for other models Do you know that you can trade in your iPad 2 16 GB Wifi for upto $300? Amazon has an excellent trade in program for selling your used iPad 2s. Depending on the condition of the iPad 2  Amazon offers $234, $270, $300.00 for 16 GB Wifi versions that in Acceptable, Good and Like New conditions respectively.  The higher models of iPad 2s fetch you more money. With this great deal from Amazon the amount of extra money you need to spend for new iPad is almost half of their price. Visit Amazon Trade In’s website or read Amazon’s brilliant plan to pay you crazy money for your iPad 2 for more details. Related: New IPad Vs. IPad 2–Side By Side Comparison Of Hardware Specification [Infographic]

    Read the article

  • Beginner Geek: How to Burn an ISO Image to a Disc

    - by Mysticgeek
    There may be a time when you have an ISO image that you need to burn to a CD or DVD for use in a computer or other device. Today we show you how to do it using ImgBurn, ISO Recorder, and Windows Disc Image Burner in Windows 7. You might need to burn an ISO of an operating system, software app, CD, DVD…etc. It doesn’t matter what the ISO image is, burning an image is a fairly straight-forward process and here we’ll take a look at three free options to accomplish it. Using ImgBurn ImgBurn is an awesome free utility that will create ISO images, allow out burn almost anything, and a lot more. Although there are a lot advanced features available, burning an ISO to disc is easy. Download and install ImgBurn (link below) taking the defaults in the install wizard. The main thing to watch for and uncheck during installation is when it offers the worthless Ask Toolbar. The easiest way to use ImgBurn is to burn an image to disc is pop in a blank disc to the CD/DVD drive, right-click on the ISO file, and select Burn using ImgBurn. ImgBurn opens up with the source and destination fields already filled in. You can leave the default settings, then click the Write button. You’ll notice that the ImgBurn Log screen opens, this is by default and is meant to show error messages you may receive during the writing process.   A successful burn! That is all there is to it…click Ok and close out of ImgBurn. Use ISO Recorder ISO Recorder (link below) is another great utility for burning ISO images to disc. They have a version for XP, Vista, and Windows 7 (32 & 64-bit Versions). Pop your blank disc into your CD/DVD drive and right-click on the ISO image file and select Copy image to CD from the Context Menu. In the next screen the image file path is in the Source Image file field. Under Recorder select the drive with your blank disc, select a recording speed and click Next. You’ll see a progress screen while the data is written to the disc and finalizing… That’s it! Your disc will pop out and you can click Finish to close out of ISO Recorder. Use Windows 7 If You’re using Windows 7, use the built in Windows Disc Image Burner feature to burn ISO images to disc. The process is very straight-forward, and for a full walkthrough on this, check out our article on how to burn an ISO image in Windows 7. Conclusion You don’t need an expensive commercial application to burn an ISO image to disc. Using any one of these free utilities will get the job done quite nicely. Download ImgBurn Download ISO Recorder Similar Articles Productive Geek Tips How to Make a Windows Vista Repair Disk If You Don’t Have OneHow to Create a Windows ISO from a Disc Using ImgBurnEasily Burn Discs With BurnAware Free EditionCreate A Windows Home Server Home Computer Restore DiscWhy is Amarok’s "Burn This Album" Disabled in Ubuntu? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Google Translate (for animals) Out of 100 Tweeters Roadkill’s Scan Port scans for open ports Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows If it were only this easy

    Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >