Search Results

Search found 3052 results on 123 pages for 'jawahar sync'.

Page 45/123 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Windows 7 - cancel mirror synchronisation

  - by Chris W

  I've got basic disk OS managed disk mirroring setup in Windows 7 for a couple of volumes. After a power failure the mirrors are currently resynching. These are only small volumes of data but the sync has not completed after more than 24 hours. Is there any way to stop this as it's driving me nuts? I need to get the machine back to a usable state to get some work done but it's a bit of a dog whilst this synch is going on. I've tried removing the mirrors but it won't let me do that whilst the re-sync is in progress.

  Read the article

• new monitor won't work on win3.1

  - by Rick Workover

  My old system monitor for my Windows 3.1 machine failed and the new flat screen has a sync error. The new monitors do not support the refresh/screen size it is set to. It boots up into Windows and the monitor is blank with a sync error. Without Windows 3.1 working I don't know how to change the refresh/size to get it to work. I haven't used Win3.1 in so long that I can't remember how to fix this. So, how do I reset the refresh rate and screen resolution it is set to, without being able to actually see anything?

  Read the article

• Changing Network Path of Offline Files

  - by Adam

  Many of our users have their Home folder set as Available Offline. Their Windows 7 laptops will not be back on our network for a few weeks. In the mean time, we're setting up new servers and reorganizing our files, so the network path to the Home folder is going to be completely different. Based on some testing I did, when the users return, any files they've created or modified while offline will be gone, and the new Home folder will be there and not set to sync. The offline cache of the old Home folder is still accessible through the Sync Center, but they're not going to want to dig through that and try to find what's missing. Avoiding this would involve keeping the old server around and moving everyone to the new location in person, so we know for sure they're synced first. Is there any way to avoid this that isn't as tedious, like a quick registry edit or something that will point the old offline cache to the new location?

  Read the article

• rsync chown warning

  - by Ted Kim

  I try to sync two directories using rsync. the source is on Linux, and the other is on windows. So, I mount the directory on windows using the command mount -t cifs ..... in Linux system. Then I execute rsync .... Everything is OK, but rsync prints out rsync: chown "/mnt/windows/A/." failed: Permission denied (13) rsync: chown "/mnt/windows/A/readme.txt" failed: Permission denied (13) I want to sync the directories without changing ownership. How can I do? please let me know. Thanks in advance.

  Read the article

• How to change aging AD password while connected over VPN from Mac

  - by Franek Kuciapa

  I am connecting to the office from mac via VPN, Cisco AnyConnect Secure Mobility Client. I do not know what to do when my AD password on the firm side will age and approach expiration to ensure that my Mac and VPN continue to work afterwards. Is the proper thing to do in this case to connect via VPN and then change the password on Mac via System Preferences, Users & Groups? Will this update the AD on the server side? Will it sync the PointSec as well that is running on the Mac? Or is a better procedure to RDP to a Windows box while connected over VPN and change the password there hoping the Mac will somehow sync up ?? Running Mountain Lion on the Mac.

  Read the article

• rsync creating thousands of ..ds_store files from mounted volume

  - by daniel Crabbe

  I've been using rsync on OS X to sync all our website admins. It was working fine until the OS X 10.6.3 update! Now it creates thousands of empty (0-kb) folders. It only does it when synching to a mounted network drive (which we need to do) as when I sync to my local drive it works as usual! I've tried excludes which don't seem to be working... also tried a different version of rsync so it's an OS X issue. echo "" echo "~*~*~*~*~*~*~*~*~*~*~*~*~*" echo " SYNCING up KINEMASTIK" echo "~*~*~*~*~*~*~*~*~*~*~*~*~*" /usr/local/bin/rsync -aNHAXv --progress --exclude-from 'exclude.txt' /Volumes/Groups/Projects/483_Modern_Activity_Website/web/youradmin/ /Users/dan/Dropbox/documents/WORK/kinemastik/WEBSITE/youradmin/ echo "" echo "~*~*~*~*~*~*~*~*~*~*~*~*~*" echo " SYNCING up CHRIS BROOKS YOURADMIN" echo "~*~*~*~*~*~*~*~*~*~*~*~*~*" /usr/local/bin/rsync -aNHAXv --progress --exclude-from 'exclude.txt' /Volumes/Groups/Projects/483_Modern_Activity_Website/web/youradmin/ /Volumes/Groups/Projects/516_ChrisBrooks/website/youradmin/ Has anyone experienced the same problem?

  Read the article

• Netboot Debian (wheezy) from NFS v4

  - by bara

  Is it possible to boot Debian Wheezy from NFS v4? Bootwing with NFS v3 works just fine. NFS v4 not. This is in my /etc/exports: /nfs 192.168.100.0/24(ro,sync,insecure,no_root_squash,no_subtree_check,fsid=0) /nfs/root 192.168.100.0/24(ro,nohide,sync,insecure,no_root_squash,no_subtree_check) /nfs/root/www contains the root of the webserver. The commandline is: rootfstype=nfs4 root=/dev/nfs4 nfsroot=192.168.100.1:/root/www fails with mount call failed - server replied: Permission denied. Mounting from the busybox in the initrd fails: mount -t nfs4 192.168.100.1:/nfs/root/www /root mounting .. failed: Invalid argument Do I need to modify the initrd?

  Read the article

• How to determine the used size of device associated's buffer

  - by dubbaluga

  Hi, when mounting a device without the "sync" option, e. g. by invoking the following: mount -o async /dev/sdc1 /mnt a buffer is associated with a device to optimize (speed) read/write operations. Is there a way to determine the size of this buffer? Another question that comes into my mind is, if it's possible to find out how much of it is used currently. This can be interesting to determine the time it would take to "sync" or "umount" slow devices, such as flash-based media. Thanks in advance for your answers, Rainer

  Read the article

• how can i move my events in my ipod calendar to google? it won't let me move items from ipod to goog

  - by Johnny S.

  I've followed googles recommendations and steps for syncing my ipod touch, newest OS, with my google calendar. Sync works great when google calendar events are added or deleted on the marked for syncing calendar. They show up on my ipod. But when I make changes on the native Ipod touch calendar they are not reflected in the google calendar marked for syncing. What gives? I also have been unable to do an initial sync that would move my Ipod calendar events to my google calendar. Any suggestions?

  Read the article

• Is there an iPhone app that lets you download torrents?

  - by alex

  It'd be good if one let you download to it's memory, and then sync to a PC when convenient.

  Read the article

• Perforce Proxy Server: Caching selective files [closed]

  - by fbrereto

  I just set up a Perforce proxy server for work. I'm noticing the cache directory is filling up very quickly -- with files I know I will never need. For example, there is a 'sandbox' directory in the depot where users keep personal branches and other work; a p4 sync is causing the p4 proxy cache to grab these user's sandboxes when I'll never need them. I would create a symbolic link for the sandbox directory to /dev/null but then I wouldn't be caching my sandbox, which I am interested in. Is there any way to tell the perforce proxy something to the effect of "if I haven't had to sync it, please don't cache it?"

  Read the article

• Simple one-way synchronisation of user password list between servers

  - by Renaud Bompuis

  Using a RedHat-derivative distro (CentOS), I'd like to keep the list of regular users (UID over 500), and group (and shadow files) pushed to a backup server. The sync is only one-way, from the main server to the backup server. I don't really want to have to deal with LDAP or NIS. All I need is a simple script that can be run nightly to keep the backup server updated. The main server can SSH into the backup system. Any suggestion? Edit: Thanks for the suggestions so far but I think I didn't make myself clear enough. I'm only looking at synchronising normal users whose UID is on or above 500. System/service users (with UID below 500) may be different on both system. So you can't just sync the whole files I'm afraid.

  Read the article

• Trying to script rsync using pam_exec

  - by Ricky-Rose

  I'm trying to write a bash script that will execute rsync when called by pam_exec. I've tried a couple different ways, and I'm not sure what I'm doing wrong. When I try to run the script at login by adding session optional pam_exec.so /usr/bin/local/sync.sh to my sshd file, it gives me an exit code of 12. if I log in and then manually run my script, it allows me to connect to the remote server, and it lists my files, but it doesn't actually sync anything. I have tried the code below using buth $USER and $PAM_USER. $PAM_USER doesn't work at all. #!/bin/sh rsync -azv -e ssh $USER@remote_server:/home/html/$USER/ /home/html/$USER

  Read the article

• Running rsync on network connect

  - by user40495

  I have one mac which is always on and is my main computer. I also have a MacBook and I'm trying to Sync my iphoto library. So I can successfully use rsync to sync files. I'm using a cron to have it run once a day. In reality the macbook isn't always on, so I'm looking for a way to run rsync when ever the two computers are connected on the same wifi network. So I'm guessing the best place is to somehow run rsync when the airport is connected. Whats the best way

  Read the article

• Running rsync on network connect

  I have one mac which is always on and is my main computer. I also have a MacBook and I'm trying to Sync my iphoto library. So I can successfully use rsync to sync files. I'm using a cron to have it run once a day. In reality the macbook isn't always on, so I'm looking for a way to run rsync when ever the two computers are connected on the same wifi network. So I'm guessing the best place is to somehow run rsync when the airport is connected. Whats the best way

  Read the article

• File creation time on Windows vs Linux

  - by Sergei

  We have following setup: mountserver - debian linux fileserver1 - Windows 2008 R2 Storage server fileserver2 - Celerra NS20 exporting CIFS share workstation - windows 7 with mapped drive to share on fileserver2 What we are doing: mounted share from fileserver1 on mountserver, e.g. /shared/fileserver1 mounted share from fileserver2 on mountserver, e.g. /shared/fileserver2 ran rsync on mountserver to sync data from fileserver1 to fileserver2.Used atime as parameter to sync data not older than X after a while tried to delete data older that Y on /shared/fileserver2. From what I see, linux stat command on mountserver returns following when quering file on /shared/fileserver2: At the same time when I open property for the same file using mapped drive connected to fileserver2,I see following for the same file: As you can see, Created date of 12 August shown in Windows Explorer is nowhere to be seen using stat command Am I missing something here?

  Read the article

• Simple mdadm RAID 1 not activating spare

  - by Nick Liu

  I had created two 2TB HDD partitions (/dev/sdb1 and /dev/sdc1) in a RAID 1 array called /dev/md0 using mdadm on Ubuntu 12.04 LTS Precise Pangolin. The command sudo mdadm --detail /dev/md0 used to indicate both drives as active sync. Then, for testing, I failed /dev/sdb1, removed it, then added it again with the command sudo mdadm /dev/md0 --add /dev/sdb1 watch cat /proc/mdstat showed a progress bar of the array rebuilding, but I wouldn't spend hours watching it, so I assumed that the software knew what it was doing. After the progress bar was no longer showing, cat /proc/mdstat displays: md0 : active raid1 sdb1[2](S) sdc1[1] 1953511288 blocks super 1.2 [2/1] [U_] And sudo mdadm --detail /dev/md0 shows: /dev/md0: Version : 1.2 Creation Time : Sun May 27 11:26:05 2012 Raid Level : raid1 Array Size : 1953511288 (1863.01 GiB 2000.40 GB) Used Dev Size : 1953511288 (1863.01 GiB 2000.40 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Mon May 28 11:16:49 2012 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Name : Deltique:0 (local to host Deltique) UUID : 49733c26:dd5f67b5:13741fb7:c568bd04 Events : 32365 Number Major Minor RaidDevice State 1 8 33 0 active sync /dev/sdc1 1 0 0 1 removed 2 8 17 - spare /dev/sdb1 I've been told that mdadm automatically replaces removed drives with spares, but /dev/sdb1 isn't being moved into the expected position, RaidDevice 1. UPDATE (30 May 2012): A badblocks destructive read-write test of the entire /dev/sdb yielded no errors as expected; both HDDs are new. As of the latest edit, I assembled the array with this command: sudo mdadm --assemble --force --no-degraded /dev/md0 /dev/sdb1 /dev/sdc1 The output was: mdadm: /dev/md0 has been started with 1 drive (out of 2) and 1 rebuilding. Rebuilding looks like it's progressing normally: md0 : active raid1 sdc1[1] sdb1[2] 1953511288 blocks super 1.2 [2/1] [U_] [>....................] recovery = 0.6% (13261504/1953511288) finish=2299.7min speed=14060K/sec unused devices: <none> I'm now waiting on this rebuild, but I'm expecting /dev/sdb1 to become a spare just like the five or six times that I've tried rebuilding before. UPDATE (31 May 2012): Yeah, it's still a spare. Ugh! UPDATE (01 June 2012): I'm trying Adrian Kelly's suggested command: sudo mdadm --assemble --update=resync /dev/md0 /dev/sdb1 /dev/sdc1 Waiting on the rebuild now... My questions are: Why isn't the spare drive becoming active sync? How can I make the spare drive become active?

  Read the article

• How to setup an iTunes library to use between two Macs?

  - by stead1984

  As you can tell this is no where near work related. I have an iMac G5 where my itunes is currently hosted, I have also just got a new MacBook Pro. What I want to be able to do is sync my itunes library from my iMac to my MacBook Pro, that way it can be accessible away from my home network, then if I make any changes to the itunes library (like change a track name) it will sync these changes back once I connect back to the home network. My current itunes contains music, videos, podcasts, playlists and iPhone apps, I would also like iTunes to track play counts collectively between the iMac and the MacBook Pro.

  Read the article

• external pop email relay

  - by Pixman

  I want to offer to my customer this possibility : get her pop3 emails from external pop3 server forward the news emails to the new external pop3 server I have find lot of tools for sync imap accounts, or sync pop to imap, but i just want get pop and send to another email adress ! I search a answer for linux ( if i can make a simple daemon for make it's it's good ). Thanks a lot for your help. edit for more detail : For simplify my question, in my use case, it's just want to connect as client via pop protocol ( like a mail app ). And i check news emails, and forward to other email adress. I search about an app or code for create this on linux. In this situation have no access to mailbox dirs, or server configuration ( in this case i have already the answer by create a qmail hook ) Maybe, it's not the good website ? my question must be post on the stackoverflow part ?

  Read the article

• How to scale out OpenStreetMap data efficiently

  - by Pierre

  For over a year now, I'm running an in-house PostGIS server filled with OSM data, used for both Mapnik-based tile generation and Nominatim-based geocoding, updated with day replicates. This works pretty well. However, as usage is growing exponentially, I would like to achieve better reliability and performance by adding additional PostgreSQL servers. And I'm kind of lost. Since PostgreSQL doesn't seem to handle replication by itself, I would think about using a piede of middleware like PgPool-II to keep the servers in sync. But I'm afraid it would be nothing but necessary for this usage : very high read-to-write ratio, where all writes are done at the same exact time every day. My questions are simple : What would you do to keep these servers in sync? And, what is done for this at the OpenStreetMap Foundation, MapQuest, Mapbox or CloudMade? Thanks.

  Read the article

• WSUS is not using Akamai CDN for syncronisation source

  - by Geekman

  I've just installed a WSUS onto our network, and I'm currently doing the initial sync. I've found that WSUS does not seem to be talking to an Akamai cache, but rather with MS directly. This is contrary to what I've always thought regarding Windows Update traffic. Tcpdump of our WSUS server doing initial sync... As you can see it's speaking with 65.55.194.221. For me to speak to this IP, I have to go over international transit links. Which is of course not ideal. 8:42:31.279757 IP 65.55.194.221.https > XXXX.XXXX.XXXX.XXXX.50888: Flags [.], seq 4379374:4380834, ack 289611, win 256, length 1460 18:42:31.279759 IP 65.55.194.221.https > XXXX.XXXX.XXXX.XXXX.50888: Flags [.], seq 4380834:4382294, ack 289611, win 256, length 1460 18:42:31.279762 IP 65.55.194.221.https > XXXX.XXXX.XXXX.XXXX.50888: Flags [.], seq 4382294:4383754, ack 289611, win 256, length 1460 18:42:31.279764 IP 65.55.194.221.https > XXXX.XXXX.XXXX.XXXX.50888: Flags [P.], seq 4383754:4384144, ack 289611, win 256, length 390 18:42:31.279793 IP XXXX.XXXX.XXXX.XXXX.50888 > 65.55.194.221.https: Flags [.], ack 4369154, win 23884, length 0 18:42:31.279888 IP XXXX.XXXX.XXXX.XXXX.50888 > 65.55.194.221.https: Flags [.], ack 4377914, win 23884, length 0 18:42:31.280015 IP XXXX.XXXX.XXXX.XXXX.50888 > 65.55.194.221.https: Flags [.], ack 4384144, win 23884, length 0 And yet, if I ping download.windowsupdate.com it seems to resolve to a local (national) Akamai node, just fine: root@some-node:~# ping download.windowsupdate.com PING a26.ms.akamai.net (210.9.88.48) 56(84) bytes of data. 64 bytes from a210-9-88-48.deploy.akamaitechnologies.com (210.9.88.48): icmp_req=1 ttl=59 time=1.02 ms 64 bytes from a210-9-88-48.deploy.akamaitechnologies.com (210.9.88.48): icmp_req=2 ttl=59 time=1.10 ms Why is this? And how can I change that (if possible)? I know that I can manually specify a WSUS source to sync with instead of pick the default MS Update like I currently have... But it seems like I shouldn't have to do this. NOTE: I've haven't confirmed if a WUA speaks with Akamai, just looking at WSUS as all WUAs will use our internal WSUS from now on. We'll be looking to join an IX shortly with the hopes of peering with an Akamai cache and have very fast access to Windows Updates. Before I let this drive my motivations for an IX at all I want to first confirm it's actually possible for WSUS to speak with an Akamai cache. I know this is somewhat networking related, but I feel like it has more to do with WSUS than anything, so someone who knows WSUS better than me will likely be able to figure this out.

  Read the article

• Cannot install grub to RAID1 (md0)

  - by Andrew Answer

  I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat This is the my mdadm output after sync: /dev/md0: Version : 0.90 Creation Time : Wed Feb 17 16:18:25 2010 Raid Level : raid1 Array Size : 470455360 (448.66 GiB 481.75 GB) Used Dev Size : 470455360 (448.66 GiB 481.75 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Nov 1 15:19:31 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 92e6ff4e:ed3ab4bf:fee5eb6c:d9b9cb11 Events : 0.11049560 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. This is my fdisk -l output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057d19 Device Boot Start End Blocks Id System /dev/sda1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sda2 940910985 976768064 17928540 5 Extended /dev/sda5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table This is my grub install output: root@answe:~# grub-install /dev/sda /usr/sbin/grub-setup: warn: Attempting to install GRUB to a disk with multiple partition labels or both partition label and filesystem. This is not supported yet.. /usr/sbin/grub-setup: error: embedding is not possible, but this is required for cross-disk install. root@answe:~# grub-install /dev/sdb Installation finished. No error reported. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... Anybody can resolve this issue? I have big headache with this.

  Read the article

• How to determine if a file has been backed up?

  - by Console

  I try to consolidate old drives to new ones of larger capacity. Sometimes files have been renamed, but are otherwise identical. Sometimes an old directory has just a few more files in it than a newer directory with the same name. Sometimes a file has the same name but the size differs. So I often find myself asking the question: Are there any files on this old drive or directory that I haven't already copied to the new drive? I just want to know that I have the files, I don't want to try and sync stuff automatically (Syncing tools tend to just sync, creating duplicate folder structures and other problems, so I prefer to do it by hand). Basically, if an old drive has a file called "foo.bar" ten directories deep, and my new big drive has an identical file called "oldstuff.zip" in the root, I just want a "yes you have it" or "no, unique files exist". Is there a free tool, a script or a quick and easy method (Mac/Unix or Windows) to get the answer?

  Read the article

• Mysql Master-ColdMaster

  - by enedebe

  I explain my case: I'm at Amazon AWS and I want to be fault tolerant on a entire region failure. My basic problem is to have the db in sync with 2 regions. My options: Master-Master (high lag) Hand made sync every 5 minutes Master-ColdMaster?! (copy on the fly but Master won't wait the other region commit) In my system we could afford loosing a piece of data (we're not a bank) the last inserts in the db, but we could not afford more than 10 minutes of downtime. The database is small and the level of inserts is low, and I wouldn't affect the normal usage waiting other region commit. Is the 3 solution posible? And the most important, once the primary fail how we can detect and change the rol between master-coldmaster -- coldmaster-master ? Is there any clean-mode to restore between failure? Thank's!

  Read the article

• Consolidating Contacts from Multiple Services

  - by SquareWheel

  I'm looking for a good way to consolidate my many email/messenger contacts through my different accounts and services. I'd like to have all my contacts in one place, or have them sync between all my different services so they are the same everywhere. If possible, it should support Live Mail/Messenger, Google Contacts, and mobile syncing. Windows Live Mail is great for accessing all your mail accounts, but the contacts viewer only works for contacts affiliated with that Live account. I could go for the contacts folder built into Vista and above, but Live messenger doesn't access that so I would have a separate set of contacts for my IM account. Is there software, or an online service, that can do this? If this is asking to much, is there a proper solution to Live/Google Contacts bidirectional sync?

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >