Search Results

Search found 19460 results on 779 pages for 'local administrator'.

Page 45/779 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Iomega eGo Encrypt Plus Encrypted Partition not mounting properly says "local disk"

  - by mosiac

  I'm working with an Iomega eGo 500gb Encrypt Plus portable drive. When I first set it up and installed the software and set a user password everything worked fine. The partition labeled "IomegaHDD" mounted properly and I could access the free space. Then I changed the ADMIN password which required me to lockout the device, wait 60 seconds, and then login to the Admin section and change the password, lockout the device again, wait 60 seconds, and then log back in with my user password. When I did that it of course unmounted the IomegaHDD partition to secure it, when it remounts it, it only shows up as "local disk" now and will not remount properly. I had not removed the cable while doing any of this. I have since tried unplugging and plugging back in to login to the drove but that has not worked. I'm wondering if I should remove every instance of "generic usb hub" from device manager and wait for it to re-add itself, or move it to a new set of USB ports temporarily to seee if that helps. Any ideas?

  Read the article

• Force Windows Local Subnet Traffic through a Gateway

  - by Beerey

  Hi all, We are attempting to route all traffic from a certain machine to a gateway. This works ok for traffic destined for subnets outside of the machine's subnet. However, traffic to machines in the same subnet as the source machine goes through an On-Link gateway in Windows. This means that the default gateway is ignored, and traffic in a subnet (for example, 192.168.50.10 - 192.168.50.11) flows. Destination Netmask Gateway Interface Metric 192.168.50.0 255.255.255.0 On-link 192.168.50.214 276 This route can be deleted from Windows, but when the machine is rebooted it always comes back. Adding a persistant static route to the gateway with a lower metric doesn't work, since it will still try the On-Link gateway after the persistant route fails. Adding each machine in a VLAN isn't an option due to the setup we have Adding a startup script to delete the gateway isn't a great option either, since users will have full admin access to the machine and might disable the script. We cannot transperantly intercept all network traffic on the subnet using Gratuitous ARPs or transparent proxying, since there are other machines on the subnet which use a different gateway The only way we have gotten it to work is by adding a persistant route to the gateway for the subnet traffic, and deleting the On-link route on reboot. The question is then. Is there a way to permanently remove this On-link route If not, is there a way to otherwise force even local subnet traffic to go through a gateway?

  Read the article

• Internet Explorer / Windows 7 does not want to show HTML file from local network drive

  - by Jaanus

  Setup: I have Windows 7 running inside VirtualBox on Mac OS X host. I have a shared drive with some HTML files, that I am mounting as a local drive W: in Windows, from the VirtualBox server \VBOXSVR. I want to look at them with a browser in Windows. Chrome in Windows 7 opens and shows those HTML files just fine (file:///W:/welcome.html). But Internet Explorer does not, and shows this error instead of the files: Internet Explorer cannot display the web page What you can try: [button Diagnose Connection Problems] More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For the internet zone in the status bar, it shows: Internet | Protected Mode: On IE settings are a mystery to me, and I could possibly get it to work by tweaking IE settings, but I don't know which ones. How do I make IE show the same files that Chrome is happy to show? (Chrome showing them means that the files themselves are fine, there is something about the setup that just makes IE be a diva.)

  Read the article

• Real-time local backup with versioning on Windows 7/8

  - by Borda

  I'm looking for a reliable backup solution on Windows, something with a feature set similar to Yadis. I've been using CrashPlan for 2 months, but their software lost more than 1TB of my data, that's why I'm looking for alternatives. Requirements: Real-time folder-to-folder backup: I don't need online features, I want to use this to duplicate my files between my local disks. Versioning support: Should be able to choose how many versions to keep of the files. Plain backup: I'd like to be able to open the backup without special software. No proprietary file format. External disk support: Shouldn't have any problem using external disks, at least on the source side. Backup every file, even locked/system files. (Yadis fails this one) Should start automatically, and have a comfortable GUI. Should use actively maintained and/or popular software. I don't want to use discontinued products. Optional requirements: Low RAM usage I'm not really comfortable with something that eats 1GB of my RAM. Compression support Preferably ZIP, but I'm not picky about this. Any ordinary everyday format is acceptable. Freeware or Open Source Preferred, but not necessary. I can do a one-time payment within reasonable bounds. (preferably under $100) I only need Windows support, but if it works on Linux, that's a plus. I've already searched and tried lots of software, most of them failed at the plain backup, the versioning or the locked file backup requirements.

  Read the article

• Can't connect to local MySQL server through socket

  - by Martin

  I was trying to tune the performance of a running mysql-server by running this command: mysqld_safe --key_buffer_size=64M --table_cache=256 --sort_buffer_size=4M --read_buffer_size=1M & After this i'm unable to connect mysql from the server where mysql is running. I get this error: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) However, luckily i can still connect to mysql remotely. So all my webservers still have access to mysql and are running without any problems. Because of this though i don't want to try to restart the mysql server since that will probably mess everything up. Now i know that mysqld_safe is starting the mysql-server, and since the mysql server was already running i guess it's some kind of problem with two mysql servers running and listening to the same port. Is there some way to solve this problem without restarting the initial mysql server? UPDATE: This is what ps xa | grep "mysql" says: 11672 ? S 0:00 /bin/sh /usr/bin/mysqld_safe 11780 ? Sl 175:04 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --socket=/var/run/mysqld/mysqld.sock --port=3306 11781 ? S 0:00 logger -t mysqld -p daemon.error 12432 pts/0 R+ 0:00 grep mysql

  Read the article

• MySQL -- enable connection to remote server via local /tmp/mysql.sock

  - by Kevin

  Hey all, I run a shared hosting provider and we're looking to move to a High Availability (replicated across multiple datacenters) setup for our hosting. We have created a replicated MySQL setup with failover that works wonderfully, and we'd like to move all of our clients' databases to it. The only trouble is that we have many many customers, all of whom have configured their Wordpress, Drupal, etc. installations to connect to MySQL via a local socket, not to the address of the remove server. I would hate to have to go through manually and change the connection statement in all of our clients' sites. What I'd ideally love to see is a program that listens on /tmp/mysql.sock and forwards connections there to the remote server I specify. I've seen SQL Relay, but it seems to require that I hardcode all of the database names and usernames and passwords into its configuration file. This is not going to work for me because our users add new databases dynamically all of the time, and I'd rather not have to write code to updated SQLRelay's config file every time. Does anyone have an idea on how to do this? Alternatively, I'd accept idea on how to handle this at the PHP level. (i.e. redirect any attempted calls to mysql_connect() to use that hostname rather than localhost) Thanks, Kevin

  Read the article

• What VNC (or similar) software for Windows 7 Home allows me to control my parents’ computer remotely as an administrator user?

  - by Paul D. Waite

  Here’s what I dream of: I install Windows 7 Home on my parents’ PC. They have a regular user account that they use, meaning they can’t install anything. I have an administrator account, meaning I can install things for them. I install some sort of VNC software on their machine that lets me access their computer remotely under the administrator account, so that I can install software for them (or do other administrator tasks, e.g. updates) without actually going to their house. Is there any VNC or VNC-like software that supports the above? (I guess I might be better off buying them Windows 7 Professional, and using Remote Desktop. At some point I’ll give up and get them an iPad, but for now, remote Windows admin is the dream.)

  Read the article

• what does "Net user administrator /active:yes" do to a computer?

  - by Rees

  i just purchased a new laptop and had some issues with it... I called tech support and they had me run this command in cmd prompt by right clicking the cmd icon and selecting "run as administrator" with root C:\windows\system32: "Net user administrator /active:no" after it was determined that it didn't fix the issue we ran this code "Net user administrator /active:yes" i then rebooted..and was asked for my windows login for my user account "Rees" as usual.. however ALL my settings where gone (including my desktop files) as though it was the first time I booted up. WHAT in the world happened with this command?? I desperately NEED my user accounts and files back to how they were!! (running windows 7) Please help!

  Read the article

• High latency issue for web service call from amazon aws ec2 to local server

  - by SibzTer

  We have a legacy web application that is running in our data center on premises located in Houston. We have a developed a new .net 4 based web application in order to provide new features to customers. The new web application is hosted in amazon aws ec2 environment (N. Virginia region us-east-1b zone). In order to get seamlessly integrate with the legacy application the new web application makes web service calls to retrieve data. We are seeing an unusually high latency time in the order of 5+ seconds for these web service calls. The exact same web service call returns in less than a second on our local PCs (which makes sense given physical proximity to the actual server). The weird part is that we have developers in California who also have the same milliseconds response time. We are testing the web service response using third party tools such as SoapUI, Google Chrome extensions such as Advanced REST Client, Postman REST Client, etc. As if this wasnt weird enough, we have noticed the same low latency from certain other ec2 instances while testing which are in the same region and availability zone as well. If we experienced the high latency consistently from all the ec2 instances I could understand. But there is something else going on. Comparing the various stats and results between the low latency and high latency ec2 servers do not show any significant differences: ping (constant 40ms), tracert, winmtr, etc. We have instances that are in the VPC as well. So I tried both the public and private IP address of the web service host server and that didnt make a difference either for the above results. We need to resolve this latency issue as this is causing the resulting web pages to load very slowly (almost 15+ seconds which is simply unacceptable). The ec2 instances have Windows Server Datacenter 64 bit. Let me know if there is any other infor I can provide to help diagnose this.

  Read the article

• Force local IP traffic to an external interface

  - by calandoa

  I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to forward all the traffic sent to one of these local addresses through the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 should be not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. May be I could then do NAT forwarding of all traffic directed to fake 192.168.1.2 on eth1, rerouted to 192.168.1.1 internally? I am actually struggling with iptables, but it is too tough for me. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

  Read the article

• VPN - local and remote networks IP collision

  - by Guido García

  I have created a VPN connection in Windows using the New Network Connection wizard that comes with Windows. It works without problems in most places, but there is one concrete place where, despite the connection to the remote public IP works fine, it is not able to validate the login/password and establish the VPN connection. In this place, the network is 10.0.0.x (the same I use in other places where I am able to connect). The remote network is 192.168.x.x, so I suspect there is some kind of IP collision, because before connecting, a traceroute to i.e. 192.168.0.40 does not fail. 1 4 ms 1 ms 1 ms LINKSYS [10.0.0.1] 2 5 ms 1 ms 1 ms 172.26.27.1 3 4 ms 5 ms 3 ms 192.168.1.100 ... (more) I can't modify the local network further than the first router (10.0.0.1). That is the only different I've found so far. Any idea about how to solve it? Thank you.

  Read the article

• IP-dependent local port-forwarding on Linux

  - by chronos

  I have configured my server's sshd to listen on a non-standard port 42. However, at work I am behind a firewall/proxy, which only allow outgoing connections to ports 21, 22, 80 and 443. Consequently, I cannot ssh to my server from work, which is bad. I do not want to return sshd to port 22. The idea is this: on my server, locally forward port 22 to port 42 if source IP is matching the external IP of my work's network. For clarity, let us assume that my server's IP is 169.1.1.1 (on eth1), and my work external IP is 169.250.250.250. For all IPs different from 169.250.250.250, my server should respond with an expected 'connection refused', as it does for a non-listening port. I'm very new to iptables. I have briefly looked through the long iptables manual and these related / relevant questions: http://serverfault.com/questions/57872/iptables-question-forwarding-port-x-to-an-ssh-port-of-different-machine-on-the-n http://serverfault.com/questions/140622/how-can-i-port-forward-with-iptables However, those questions deal with more complicated several-host scenarios, and it is not clear to me which tables and chains I should use for local port-forwarding, and if I should have 2 rules (for "question" and "answer" packets), or only 1 rule for "question" packets. So far I have only enabled forwarding via sysctl. I will start testing solutions tomorrow, and will appreciate pointers or maybe case-specific examples for implementing my simple scenario. Is the draft solution below correct? iptables -A INPUT [-m state] [-i eth1] --source 169.250.250.250 -p tcp --destination 169.1.1.1:42 --dport 22 --state NEW,ESTABLISHED,RELATED -j ACCEPT Should I use the mangle table instead of filter? And/or FORWARD chain instead of INPUT?

  Read the article

• Sending mail through local MTA while domain MX records point to Google Apps

  - by Assaf

  My domain's email is managed by Google Apps, so that domain users get Gmail and Calendar, etc. But I also want to be able to send applicative notifications to users outside the domain via email (e.g. "some commented on your post", and so on). However, if I try to send email through code I get blocked by Gmail after a few emails. I send marketing email through MailChimp, to minimize the risk of appearing as spam to my users (one-click unsubscribe, etc.). But I can't send applicative message in this way. I want to install a local MTA (my server runs Ubuntu), but I'm not sure what anti-spam measures I need to implement so that receiving MTAs don't think it's a spam server. What's stopping anyone from setting up a mail server and sending emails using my domain name? AFAIK it's the DNS records that show the MTA's address actually belongs to the domain. But my understanding of this is rather superficial, so someone please correct me if I'm wrong. But what sort of DNS configuration do I need to put in place so that I don't get blacklisted (assuming I don't actually spam anyone)? The MX records already point to Google, and I'd like to keep it this way. So do I just need to define an A record for my internal mail server? Should it show email as coming from a sub-domain, so as not to conflict with the bare domain being managed by google? Edit: Does the following SPF record make sense if I want email from my domain name to be sent by either google's servers or any server with a dns name ending with mydomain.com? "v=spf1 ptr mx:google.com mx:googlemail.com ~all" How should I set up reverse DNS for my server? If I have an A record that points mailsender.mydomain.com to my MTA's ip address, does it mean that reverse lookup will only allow emails sent from [email protected]?

  Read the article

• Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

  - by WerkkreW

  Hello - I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified with SpeakEasy and Speedtest.net) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

  Read the article

• IIS SMTP server (Installed on local server) in parallel to Google Apps

  - by shaharru

  I am currently using free version of Google Apps for hosting my email.It works great for my official mails my email on Google is [email protected]. In addition I'm sending out high volume mails (registrations, forgotten passwords, newsletters etc) from the website (www.mydomain.com) using IIS SMTP installed on my windows machine. These emails are sent from [email protected] My problem is that when I send email from the website using IIS SMTP to a mail address [email protected] I don’t receive the email to Google apps. (I only receive these emails if I install a pop service on the server with the [email protected] email box). It seems that the IIS SMTP is ignoring the domain MX records and just delivers these emails to my local server. Here are my DNS records for domain.com: mydomain.com A 82.80.200.20 3600s mydomain.com TXT v=spf1 ip4: 82.80.200.20 a mx ptr include:aspmx.googlemail.com ~all mydomain.com MX preference: 10 exchange: aspmx2.googlemail.com 3600s mydomain.com MX preference: 10 exchange: aspmx3.googlemail.com 3600s mydomain.com MX preference: 10 exchange: aspmx4.googlemail.com 3600s mydomain.com MX preference: 10 exchange: aspmx5.googlemail.com 3600s mydomain.com MX preference: 1 exchange: aspmx.l.google.com 3600s mydomain.com MX preference: 5 exchange: alt1.aspmx.l.google.com 3600s mydomain.com MX preference: 5 exchange: alt2.aspmx.l.google.com 3600s Please help! Thanks.

  Read the article

• Cannot Access Local Network Shares (Strange Schannel and lsass.exe issues)

  - by Fake

  When I browse to my own computer's shares by going to \\MYCOMPUTERNAME\ ; I cannot access any of the shares on my LOCAL machine (nor can I access them remotely) and it generates about 40 of the following errors in my system event log: The following fatal alert was generated: 10. The internal error state is 1203. Details: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" /> <EventID>36888</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime="2011-04-05T13:52:09.144278900Z" /> <EventRecordID>79628</EventRecordID> <Correlation /> <Execution ProcessID="552" ThreadID="672" /> <Channel>System</Channel> <Computer>DEVELOP4.CONTOSO.COM</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="AlertDesc">10</Data> <Data Name="ErrorState">1203</Data> </EventData> </Event> Additonal information: The process that is generating the error is lsass.exe OS: Windows7 Professional x64 Joined to Domain: Yes I was able to access the shares locally in the past I am having the same issue on 3 other computers that have similar configurations Any help would be greatly appreciated, because I have no idea what's wrong. Thanks!

  Read the article

• Authority Information Access local path being ignored

  - by Kevin

  I have a CA set up in Server 2008 R2, and generally it is working, but I can't control the local path/filename it writes its own certificate to for the Authority Information Access publishing. Here's a screen shot of the dialog I'm trying to set this on: From these settings I would expect to get the file: C:\Windows\system32\CertSrv\CertEnroll\DAMNIT.crt But instead I get: C:\Windows\system32\CertSrv\CertEnroll\SERVER.domain.com_My Issuing Authority(1).crt Of course, the actual change shown wouldn't be very useful, but it's illustrative; no matter what path/filename I use, it always lands up in the same place and with the same name. I actually wanted to change the name from <ServerDNSName>_<CaName><CertificateName>.crt to <CaName><CertificateName>.crt, since the latter corresponds to the HTTP URL whereas the former does not. Admittedly, I haven't set up many CAs so perhaps I'm just deluded as to what this dialog is supposed to be setting, but if so this is notoriously bad UI design. (Incidentally, I have a couple other complaints with the same dialog.) What's going on here and is there some way to get the filename pattern I want?

  Read the article

• Synchronising a remote folder with a local one.

  - by Workshop Alex

  I am using a network disk (that's connected to my router by USB) to store several data files. A simple .NET application that I've created is supposed to read and modify these data files. However, some security issues are preventing this application to access these files directly. (Actually, these have been built-in to my application on purpose since it's not going to support NAS disks.) Since this disk is shared with several computers, I just want to have a simple synchronisation method, which will copy the files to a local folder where3 my application can access them. And, once modified, it should send back the modified files to the NAS disk again. I have two options: 1) Build a second application to do my own synchronisation. 2) Find some build-in function inside Windows 7 Ultimate which can do this for me. Option 2 is preferred. Option 1 is something I can do easily, if need be. I don't need third-party tools. (Still, feel free to add some references to good tools, although I won't accept them as answers.) Basically, is this possible with Windows 7 and if so, how?

  Read the article

• VPN - local and remote networks IP collision

  - by Guido García

  I have created a VPN connection in Windows using the New Network Connection wizard that comes with Windows. It works without problems in most places, but there is one concrete place where, despite the connection to the remote public IP works fine, it is not able to validate the login/password and establish the VPN connection. In this place, the network is 10.0.0.x (the same I use in other places where I am able to connect). The remote network is 192.168.x.x, so I suspect there is some kind of IP collision, because before connecting, a traceroute to i.e. 192.168.0.40 does not fail. 1 4 ms 1 ms 1 ms LINKSYS [10.0.0.1] 2 5 ms 1 ms 1 ms 172.26.27.1 3 4 ms 5 ms 3 ms 192.168.1.100 ... (more) I can't modify the local network further than the first router (10.0.0.1). That is the only different I've found so far. Any idea about how to solve it? Thank you.

  Read the article

• Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

  - by WerkkreW

  I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

  Read the article

• Internet Explorer / Windows 7 does not want to show HTML file from local network drive

  - by Jaanus

  Setup: I have Windows 7 running inside VirtualBox on Mac OS X host. I have a shared drive with some HTML files, that I am mounting as a local drive W: in Windows, from the VirtualBox server \VBOXSVR. I want to look at them with a browser in Windows. Chrome in Windows 7 opens and shows those HTML files just fine (file:///W:/welcome.html). But Internet Explorer does not, and shows this error instead of the files: Internet Explorer cannot display the web page What you can try: [button Diagnose Connection Problems] More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For the internet zone in the status bar, it shows: Internet | Protected Mode: On IE settings are a mystery to me, and I could possibly get it to work by tweaking IE settings, but I don't know which ones. How do I make IE show the same files that Chrome is happy to show? (Chrome showing them means that the files themselves are fine, there is something about the setup that just makes IE be a diva.)

  Read the article

• IP routing Solaris 9 access the internet from local network

  - by help_me

  I am trying to configure the NICS on the Solaris Sparc server. My problem lies in getting out to the "Internet" from the local network. I have requested the NIC to receive a DHCP server address #ifconfig -interface dhcp start. If anyone could guide me as to what I need to do next. I am not able to ping 4.2.2.2 or access the internet. Much appreciated, thank you #uname -a SunOS dev 5.9 Generic_122300-59 sun4u sparc SUNW,Sun-Fire-V210 ifconfig -a lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 10.100.0.3 netmask ffffc000 broadcast 10.100.63.255 bge0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 10.100.0.22 netmask ffffc000 broadcast 10.100.63.255 bge3: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 12 inet 169.14.60.37 netmask fffffe00 broadcast 169.14.61.255 cat /etc/defaultrouter 10.100.0.254 169.14.60.1 cat /etc/resolv.conf nameserver 169.14.96.73 nameserver 169.10.8.4 netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ------ --------- 169.14.60.37 169.14.60.1 UGH 1 0 169.14.60.0 169.14.60.37 U 1 18 bge3 10.100.0.0 10.100.0.3 U 1 34940 bge0 10.100.0.0 10.100.0.22 U 1 0 bge0:2 224.0.0.0 10.100.0.3 U 1 0 bge0 default 10.100.0.254 UG 1 111 default 169.14.60.1 UG 1 26 127.0.0.1 127.0.0.1 UH 10 59464 lo0 bash-2.05$ sudo ndd -get /dev/ip bge0:ip_forwarding 1 bash-2.05$ sudo ndd -get /dev/ip bge3:ip_forwarding 1 bash-2.05$ sudo ndd -get /dev/ip ip_forwarding 1

  Read the article

• DNS resolve .com domain on local domain

  - by Joost Verdaasdonk

  I'm building a local 2008 R2 domain as a test case to be able to write a roadmap for the real new domain that needs to be created soon. What I would like to know if I'm able to make a record in DNS that will point the domain name: www.example.com and example.com to one of the servers in my network. I tried creating an a-record for it but that doesn't work. To be honest I'm not even sure if this is possible? So can I do this? That way I would be able to fully test all our services (and webb app) offline before I build the real domain and switch the DNS records at the provider. Some advice if possible and where to start is appreciated. The solution (Thanks Brent): Create new Forward lookup zone pointing to example.com Create empty A record pointing to IP of the webserver you are targeting If www is needed create A record with Name: www and IP of your webserver sub domains repeat the process but then with names for example: sub or www.sub (and ip your webserver) Be aware of the DNS Cache while you are in this process. Things can take time or do the following: Right click the server and choose clear cache in CMD: ipconfig /flushdns (to flush the client cache)

  Read the article

• Apache mod_proxy, how to forward request into local network ip(server)

  - by Beck

  Can't figure out, how to configure mod_proxy for this. I have two domains, one is working fine at the moment. Second is bind to the same ip. I need to forward requests from second domain to another server in local network. like that: domain1.com => 192.168.1.101 domain2.com => 192.168.1.102 What configuration or directives i should use? Thanks ;) Update <VirtualHost *:80> ServerName www.domain2.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://192.168.1.103:8080/ ProxyPassReverse / http://192.168.1.103:8080/ </VirtualHost> It just doesn't redirect to second server. That's it. And when i restart apache, it says something with overlapping 80 port. [warn] _default_ VirtualHost overlap on port 80, the first has precedence

  Read the article

• Windows: disable remote access of local drive, even by domain admin

  - by Matt

  We have a network of Windows 7 PCs that are managed as part of a domain. What we want is for the domain admin to be unable to view the PC's local drive (C:) unless he is physically at the PC. In other words, no remote desktop and no ability to use UNC. In other words, the domain admin should not be allowed to put \\user_pc\c$ in Windows Explorer and see all the files on that computer, unless he is physically present at the PC itself. Edit: to clarify some of the questions/comments that have come up. Yes, I am an admin---but a complete Windows novice. And yes, for the sake of this and my similar questions, it is fair to assume that I am working for someone who is paranoid. I understand the arguments about this being a "social problem versus a technical problem", and "you should be able to trust your admins", etc. But this is the situation in which I find myself. I'm basically new to Windows system administration, but am tasked with creating an environment that is secure by the company owner's definition---and this definition is clearly very different from what most people expect. In short, I understand that this is an unusual request. But I'm hoping there is enough expertise in the ServerFault community to point me in the right direction.

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >