Search Results

Search found 3666 results on 147 pages for 'mr myo min hein'.

Page 45/147 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Raidz in FreeNAS eating more space than expected

  - by swood

  I just got 6 new 2TB drives, and added them to my FreeNAS box. I have only dealt with RAID1 previously, and each setup has given what I was expecting. However, with the 6*2TB drives, I wanted to maximize the space available, so I went with raidz. But I seem to be missing space. I have 8.6TB available after the raidz was built. Maybe I did my math horribly wrong, but (N-1) x S(min) (where N=6 and S(min)=2TB) should result in 10TB. (I understand it would be more like 9.something) Does raidz actually consume more then 1 drive worth of space? Or could their possibly be another problem? (All drives have been independently verified that 2TB of space is available)

  Read the article

• intermittent SSH with ssh_exchange_identification error

  - by rafamvc

  My ssh connection to my server works every 30 min for around 10 min. Things that I figure out that might be the problem: The server is underload (it is a database server), but on those spare moments that I can connect, it is still under the same load, which doesnt make sense. The server is a ubuntu, and the consolekit was using a lot of virtual memory. Restarted the consolekit and it seems to be using a right amount of memory now. It is not the host alows or deny. Those are setup properly. It is not a firewall problem. Those settings were working and the same settings are working for other similar machines. It is on the ec2. Amazon cloud.

  Read the article

• My VARCHAR(MAX) field is capping itself at 4000; what gives?

  - by eidylon

  Hello all... I have a table in one of my databases which is a queue of emails. Emails to certain addresses get accumulated into one email, which is done by a sproc. In the sproc, I have a table variable which I use to build the accumulated bodies of the emails, and then loop through to send each email. In my table var I have my body column defined as VARCHAR(MAX), seeing as there could be any number of emails currently accumulated for a given email address. It seems though that even though my column is defined as VARCHAR(MAX) it is behaving as if it were VARCHAR(4000) and is truncating the data going into it, although it does NOT throw any exceptions, it just silently stops concatenating any more data after 4000 characters. The MERGE statement is where it is building the accumulated email body into @EMAILS.BODY, which is the field that is truncating itself at 4000 characters. Below is the code of my sproc... ALTER PROCEDURE [system].[SendAccumulatedEmails] AS BEGIN SET NOCOUNT ON; DECLARE @SENTS BIGINT = 0; DECLARE @ROWS TABLE ( ROWID ROWID, DATED DATETIME, ADDRESS NAME, SUBJECT VARCHAR(1000), BODY VARCHAR(MAX) ) INSERT INTO @ROWS SELECT ROWID, DATED, ADDRESS, SUBJECT, BODY FROM system.EMAILQUEUE WHERE ACCUMULATE = 1 AND SENT IS NULL ORDER BY ADDRESS, DATED DECLARE @EMAILS TABLE ( ADDRESS NAME, ALLIDS VARCHAR(1000), BODY VARCHAR(MAX) ) DECLARE @PRVRID ROWID = NULL, @CURRID ROWID = NULL SELECT @CURRID = MIN(ROWID) FROM @ROWS WHILE @CURRID IS NOT NULL BEGIN MERGE @EMAILS AS DST USING (SELECT * FROM @ROWS WHERE ROWID = @CURRID) AS SRC ON SRC.ADDRESS = DST.ADDRESS WHEN MATCHED THEN UPDATE SET DST.ALLIDS = DST.ALLIDS + ', ' + CONVERT(VARCHAR,ROWID), DST.BODY = DST.BODY + '<i>'+CONVERT(VARCHAR,SRC.DATED,101)+' ' +CONVERT(VARCHAR,SRC.DATED,8) +':</i> <b>'+SRC.SUBJECT+'</b>'+CHAR(13)+SRC.BODY +' (Message ID '+CONVERT(VARCHAR,SRC.ROWID)+')' +CHAR(13)+CHAR(13) WHEN NOT MATCHED BY TARGET THEN INSERT (ADDRESS, ALLIDS, BODY) VALUES ( SRC.ADDRESS, CONVERT(VARCHAR,ROWID), '<i>'+CONVERT(VARCHAR,SRC.DATED,101)+' ' +CONVERT(VARCHAR,SRC.DATED,8)+':</i> <b>' +SRC.SUBJECT+'</b>'+CHAR(13)+SRC.BODY +' (Message ID '+CONVERT(VARCHAR,SRC.ROWID)+')' +CHAR(13)+CHAR(13)); SELECT @PRVRID = @CURRID, @CURRID = NULL SELECT @CURRID = MIN(ROWID) FROM @ROWS WHERE ROWID > @PRVRID END DECLARE @MAILFROM VARCHAR(100) = system.getOption('MAILFROM'), DECLARE @SMTPHST VARCHAR(100) = system.getOption('SMTPSERVER'), DECLARE @SMTPUSR VARCHAR(100) = system.getOption('SMTPUSER'), DECLARE @SMTPPWD VARCHAR(100) = system.getOption('SMTPPASS') DECLARE @ADDRESS NAME, @BODY VARCHAR(MAX), @ADDL VARCHAR(MAX) DECLARE @SUBJECT VARCHAR(1000) = 'Accumulated Emails from LIJSL' DECLARE @PRVID NAME = NULL, @CURID NAME = NULL SELECT @CURID = MIN(ADDRESS) FROM @EMAILS WHILE @CURID IS NOT NULL BEGIN SELECT @ADDRESS = ADDRESS, @BODY = BODY FROM @EMAILS WHERE ADDRESS = @CURID SELECT @BODY = @BODY + 'This is an automated message sent from an unmonitored mailbox.'+CHAR(13)+'Do not reply to this message; your message will not be read.' SELECT @BODY = '<style type="text/css"> * {font-family: Tahoma, Arial, Verdana;} p {margin-top: 10px; padding-top: 10px; border-top: single 1px dimgray;} p:first-child {margin-top: 10px; padding-top: 0px; border-top: none 0px transparent;} </style>' + @BODY exec system.LogIt @SUBJECT, @BODY BEGIN TRY exec system.SendMail @SMTPHST, @SMTPUSR, @SMTPPWD, @MAILFROM, @ADDRESS, NULL, NULL, @SUBJECT, @BODY, 1 END TRY BEGIN CATCH DECLARE @EMSG NVARCHAR(2048) = 'system.EMAILQUEUE.AI:'+ERROR_MESSAGE() SELECT @ADDL = 'TO:'+@ADDRESS+CHAR(13)+'SUBJECT:'+@SUBJECT+CHAR(13)+'BODY:'+@BODY exec system.LogIt @EMSG,@ADDL END CATCH SELECT @PRVID = @CURID, @CURID = NULL SELECT @CURID = MIN(ADDRESS) FROM @EMAILS WHERE ADDRESS > @PRVID END UPDATE system.EMAILQUEUE SET SENT = getdate() FROM system.EMAILQUEUE E, @ROWS R WHERE E.ROWID = R.ROWID END

  Read the article

• image processing algorithm in MATLAB

  - by user261002

  I am trying to reconstruct an algorithm belong to this paper: Decomposition of biospeckle images in temporary spectral bands Here is an explanation of the algorithm: We recorded a sequence of N successive speckle images with a sampling frequency fs. In this way it was possible to observe how a pixel evolves through the N images. That evolution can be treated as a time series and can be processed in the following way: Each signal corresponding to the evolution of every pixel was used as input to a bank of filters. The intensity values were previously divided by their temporal mean value to minimize local differences in reflectivity or illumination of the object. The maximum frequency that can be adequately analyzed is determined by the sampling theorem and s half of sampling frequency fs. The latter is set by the CCD camera, the size of the image, and the frame grabber. The bank of filters is outlined in Fig. 1. In our case, ten 5° order Butterworth11 filters were used, but this number can be varied according to the required discrimination. The bank was implemented in a computer using MATLAB software. We chose the Butter-worth filter because, in addition to its simplicity, it is maximally flat. Other filters, an infinite impulse response, or a finite impulse response could be used. By means of this bank of filters, ten corresponding signals of each filter of each temporary pixel evolution were obtained as output. Average energy Eb in each signal was then calculated: where pb(n) is the intensity of the filtered pixel in the nth image for filter b divided by its mean value and N is the total number of images. In this way, en values of energy for each pixel were obtained, each of hem belonging to one of the frequency bands in Fig. 1. With these values it is possible to build ten images of the active object, each one of which shows how much energy of time-varying speckle there is in a certain frequency band. False color assignment to the gray levels in the results would help in discrimination. and here is my MATLAB code base on that : clear all for i=0:39 str = num2str(i); str1 = strcat(str,'.mat'); load(str1); D{i+1}=A; end new_max = max(max(A)); new_min = min(min(A)); for i=20:180 for j=20:140 ts = []; for k=1:40 ts = [ts D{k}(i,j)]; %%% kth image pixel i,j --- ts is time series end ts = double(ts); temp = mean(ts); ts = ts-temp; ts = ts/temp; N = 5; % filter order W = [0.00001 0.05;0.05 0.1;0.1 0.15;0.15 0.20;0.20 0.25;0.25 0.30;0.30 0.35;0.35 0.40;0.40 0.45;0.45 0.50]; N1 = 5; for ind = 1:10 Wn = W(ind,:); [B,A] = butter(N1,Wn); ts_f(ind,:) = filter(B,A,ts); end for ind=1:10 imag_test1{ind}(i,j) =sum((ts_f(ind,:)./mean(ts_f(ind,:))).^2); end end end for i=1:10 temp_imag = imag_test1{i}(:,:); x=isnan(temp_imag); temp_imag(x)=0; temp_imag=medfilt2(temp_imag); t_max = max(max(temp_imag)); t_min = min(min(temp_imag)); temp_imag = (temp_imag-t_min).*(double(new_max-new_min)/double(t_max-t_min))+double(new_min); imag_test2{i}(:,:) = temp_imag; end for i=1:10 A=imag_test2{i}(:,:); B=A/max(max(A)); B=histeq(B); figure,imshow(B) colorbar end but I am not getting the same result as paper. has anybody has aby idea why? or where I have gone wrong? Refrence Link to the paper

  Read the article

• Scrolling a canvas as a shape you're moving approaches its edges

  - by Steven Sproat

  Hi, I develop a Python-based drawing program, Whyteboard. I have tools that the user can create new shapes on the canvas, such as text/images/rectangles/circles/polygons. I also have a Select tool that allows the users to modify these shapes - for example, moving a shape's position, resizing, or editing polygon's points' positions. I'm adding in a new feature where moving or resizing a point near the canvas edge will automatically scroll the canvas. I think it's a good idea in terms of program usability, and annoys me when other program's don't have this feature. I've made some good progress on coding this; below is some Python code to demonstrate what I'm doing. These functions demonstrate how some shapes calculate their "edges": def find_edges(self): """A line.""" self.edges = {EDGE_TOP: min(self.y, self.y2), EDGE_RIGHT: max(self.x, self.x2), EDGE_BOTTOM: max(self.y, self.y2), EDGE_LEFT: min(self. x, self.x2)} def find_edges(self): """An image""" self.edges = {EDGE_TOP: self.y, EDGE_RIGHT: self.x + self.image.GetWidth(), EDGE_BOTTOM: self.y + self.image.GetWidth(), EDGE_LEFT: self.x} def find_edges(self): """Get the bounding rectangle for the polygon""" xmin = min(x for x, y in self.points) ymin = min(y for x, y in self.points) xmax = max(x for x, y in self.points) ymax = max(y for x, y in self.points) self.edges = {EDGE_TOP: ymin, EDGE_RIGHT: xmax, EDGE_BOTTOM: ymax, EDGE_LEFT: xmin} And here's the code I have so far to implement the scrolling when a shape nears the edge: def check_canvas_scroll(self, x, y, moving=False): """ We check that the x/y coords are within 50px from the edge of the canvas and scroll the canvas accordingly. If the shape is being moved, we need to check specific edges of the shape (e.g. left/right side of rectangle) """ size = self.board.GetClientSizeTuple() # visible area of the canvas if not self.board.area > size: # canvas is too small to need to scroll return start = self.board.GetViewStart() # user's starting "viewport" scroll = (-1, -1) # -1 means no change if moving: if self.shape.edges[EDGE_RIGHT] > start[0] + size[0] - 50: scroll = (start[0] + 5, -1) if self.shape.edges[EDGE_BOTTOM] > start[1] + size[1] - 50: scroll = (-1, start[1] + 5) # snip others else: if x > start[0] + size[0] - 50: scroll = (start[0] + 5, -1) if y > start[1] + size[1] - 50: scroll = (-1, start[1] + 5) # snip others self.board.Scroll(*scroll) This code actually works pretty well. If we're moving a shape, then we need to know its edges to calculate when they're coming close to the canvas edge. If we're resizing just a single point, then we just use the x/y coords of that point to see if it's close to the edge. The problem I'm having is a little tricky to describe - basically, if you move a shape to the left, and stop moving it, if you positioned the shape within the 50px from the canvas, then the next time you go to move the shape, the code that says "ok, is this shape close to the end?" gets triggered, and the canvas scrolls to the left, even if you're moving the shape to the right. Can anyone think on how to stop this? I created a youtube video to demonstrate the issue. At about 0:54, I move a polygon to the left of the canvas and position it there. The next time I move it, the canvas scrolls to the left even though I'm moving it right Another thing I'd like to add, but I'm stuck on is the scroll gaining momentum the longer a shape is scrolling? So, with a large canvas, you're not moving a shape for ages, moving 5px at a time, when you need to cover a 2000px distance. Any suggestions there? Thanks all - sorry for the super long question!

  Read the article

• form submitting with mechanize and Python

  - by MATELIN Alexis

  I'm trying to scrap a website that requires to submit two forms : a first one to loggin and a second one to specify my research. I'm using Python and the mechanize package. No problem with the first one, but i just can't figure out how to pass through the second one. Here is the part of my code related to the firm above-mentionned agemin=18 agemax=25 by='region' country='France' region=2 newcustomers=1 browser.select_form(nr=0) browser['age[min]']=agemin browser['age[max]']=agemax browser['country']=country browser['region']=region browser['by']=by browser['new-customers']=newcustomers response=browser.submit() content=response.read() but when I submit the variable 'age[min]' by example, I get the following error message : TypeError: object of type 'int' has no len() to give you some more informations, here is what I get with 'print br.form' <POST http://www.adopteunmec.com/qsearch/ajax_quick application/x-www-form-urlencoded <SelectControl(age[min]=[, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, *30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99])> <SelectControl(age[max]=[, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, *45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99])> <SelectControl(by=[*region, distance])> <SelectControl(country=[*fr, be, ch, ca])> <SelectControl(region=[*1, 2, 3, 4, 5, 6, 7, 8, 22, 23, 9, 10, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 11])> <SelectControl(distance[min]=[*, 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200, 210, 220, 230, 240, 250, 260, 270, 280, 290, 300, 310, 320, 330, 340, 350, 360, 370, 380, 390, 400, 410, 420, 430, 440, 450, 460, 470, 480, 490, 500, 510, 520, 530, 540, 550, 560, 570, 580, 590, 600, 610, 620, 630, 640, 650, 660, 670, 680, 690, 700, 710, 720, 730, 740, 750, 760, 770, 780, 790, 800, 810, 820, 830, 840, 850, 860, 870, 880, 890, 900, 910, 920, 930, 940, 950, 960, 970, 980, 990, 1000])> <SelectControl(distance[max]=[, 0, 10, 20, 30, 40, 50, 60, 70, *80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200, 210, 220, 230, 240, 250, 260, 270, 280, 290, 300, 310, 320, 330, 340, 350, 360, 370, 380, 390, 400, 410, 420, 430, 440, 450, 460, 470, 480, 490, 500, 510, 520, 530, 540, 550, 560, 570, 580, 590, 600, 610, 620, 630, 640, 650, 660, 670, 680, 690, 700, 710, 720, 730, 740, 750, 760, 770, 780, 790, 800, 810, 820, 830, 840, 850, 860, 870, 880, 890, 900, 910, 920, 930, 940, 950, 960, 970, 980, 990, 1000])> <CheckboxControl(new=[*1])>> My guess is that the form needs an object (like a list) containing all the variables to accept it ; that's why it refuses the variables submited one by one. Thank you in advance for any help ! Alexis

  Read the article

• Help with refactoring PHP code

  - by Richard Knop

  I had some troubles implementing Lawler's algorithm but thanks to SO and a bounty of 200 reputation I finally managed to write a working implementation: http://stackoverflow.com/questions/2466928/lawlers-algorithm-implementation-assistance I feel like I'm using too many variables and loops there though so I am trying to refactor the code. It should be simpler and shorter yet remain readable. Does it make sense to make a class for this? Any advice or even help with refactoring this piece of code is welcomed: <?php /* * @name Lawler's algorithm PHP implementation * @desc This algorithm calculates an optimal schedule of jobs to be * processed on a single machine (in reversed order) while taking * into consideration any precedence constraints. * @author Richard Knop * */ $jobs = array(1 => array('processingTime' => 2, 'dueDate' => 3), 2 => array('processingTime' => 3, 'dueDate' => 15), 3 => array('processingTime' => 4, 'dueDate' => 9), 4 => array('processingTime' => 3, 'dueDate' => 16), 5 => array('processingTime' => 5, 'dueDate' => 12), 6 => array('processingTime' => 7, 'dueDate' => 20), 7 => array('processingTime' => 5, 'dueDate' => 27), 8 => array('processingTime' => 6, 'dueDate' => 40), 9 => array('processingTime' => 3, 'dueDate' => 10)); // precedence constrainst, i.e job 2 must be completed before job 5 etc $successors = array(2=>5, 7=>9); $n = count($jobs); $optimalSchedule = array(); for ($i = $n; $i >= 1; $i--) { // jobs not required to precede any other job $arr = array(); foreach ($jobs as $k => $v) { if (false === array_key_exists($k, $successors)) { $arr[] = $k; } } // calculate total processing time $totalProcessingTime = 0; foreach ($jobs as $k => $v) { if (true === array_key_exists($k, $arr)) { $totalProcessingTime += $v['processingTime']; } } // find the job that will go to the end of the optimal schedule array $min = null; $x = 0; $lastKey = null; foreach($arr as $k) { $x = $totalProcessingTime - $jobs[$k]['dueDate']; if (null === $min || $x < $min) { $min = $x; $lastKey = $k; } } // add the job to the optimal schedule array $optimalSchedule[$lastKey] = $jobs[$lastKey]; // remove job from the jobs array unset($jobs[$lastKey]); // remove precedence constraint from the successors array if needed if (true === in_array($lastKey, $successors)) { foreach ($successors as $k => $v) { if ($lastKey === $v) { unset($successors[$k]); } } } } // reverse the optimal schedule array and preserve keys $optimalSchedule = array_reverse($optimalSchedule, true); // add tardiness to the array $i = 0; foreach ($optimalSchedule as $k => $v) { $optimalSchedule[$k]['tardiness'] = 0; $j = 0; foreach ($optimalSchedule as $k2 => $v2) { if ($j <= $i) { $optimalSchedule[$k]['tardiness'] += $v2['processingTime']; } $j++; } $i++; } echo '<pre>'; print_r($optimalSchedule); echo '</pre>';

  Read the article

• I am making a maze type of game using javascript and HTML and need some questions answered [on hold]

  - by Timothy Bilodeau

  First off, i am a noob to JavaScript but am willing to learn. :) I found a simple JavaScript moment engine created by another member on this site. Using that i made it so my character can walk around within a rectangle/square shaped room. I want to make it so the character can walk through a "doorway" within a wall to the next room. Either that or make it so if the character moves over a certain image within the room it will take the player to another webpage in which the character "spawns" into the room and so on and so fourth. Here is a link to what i have made so far as to get an idea. http://bit.ly/1fSMesA Any help would be much appreciated. Here is the javascript code for the character movement and boundaries. <script type='text/javascript'> // movement vars var xpos = 100; var ypos = 100; var xspeed = 1; var yspeed = 0; var maxSpeed = 5; // boundary var minx = 37; var miny = 41; var maxx = 187; // 10 pixels for character's width var maxy = 178; // 10 pixels for character's width // controller vars var upPressed = 0; var downPressed = 0; var leftPressed = 0; var rightPressed = 0; function slowDownX() { if (xspeed > 0) xspeed = xspeed - 1; if (xspeed < 0) xspeed = xspeed + 1; } function slowDownY() { if (yspeed > 0) yspeed = yspeed - 1; if (yspeed < 0) yspeed = yspeed + 1; } function gameLoop() { // change position based on speed xpos = Math.min(Math.max(xpos + xspeed,minx),maxx); ypos = Math.min(Math.max(ypos + yspeed,miny),maxy); // or, without boundaries: // xpos = xpos + xspeed; // ypos = ypos + yspeed; // change actual position document.getElementById('character').style.left = xpos; document.getElementById('character').style.top = ypos; // change speed based on keyboard events if (upPressed == 1) yspeed = Math.max(yspeed - 1,-1*maxSpeed); if (downPressed == 1) yspeed = Math.min(yspeed + 1,1*maxSpeed) if (rightPressed == 1) xspeed = Math.min(xspeed + 1,1*maxSpeed); if (leftPressed == 1) xspeed = Math.max(xspeed - 1,-1*maxSpeed); // deceleration if (upPressed == 0 && downPressed == 0) slowDownY(); if (leftPressed == 0 && rightPressed == 0) slowDownX(); // loop setTimeout("gameLoop()",10); } function keyDown(e) { var code = e.keyCode ? e.keyCode : e.which; if (code == 38) upPressed = 1; if (code == 40) downPressed = 1; if (code == 37) leftPressed = 1; if (code == 39) rightPressed = 1; } function keyUp(e) { var code = e.keyCode ? e.keyCode : e.which; if (code == 38) upPressed = 0; if (code == 40) downPressed = 0; if (code == 37) leftPressed = 0; if (code == 39) rightPressed = 0; } </script> here is the HTML code to follow <!-- The Level --> <img src="room1.png" /> <!-- The Character --> <img id='character' src='../texture packs/characters/snazgel.png' style='position:absolute;left:100;top:100;height:40;width:26;'/>

  Read the article

• Jquery mobile ajax request not working after 4-5 request is made in Android

  - by Coder_sLaY

  I am developing an application using jQuery mobile 1.1.0 RC1 and phonegap 1.5.0 I have a single HTML page which contains all the pages in it as a div(through data-role="page") here is my code <!DOCTYPE HTML> <html> <head> <title>Index Page</title> <!-- Adding viewport --> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <meta name="viewport" content="width=device-width, initial-scale=1"> <!-- Adding Phonegap scripts --> <script type="text/javascript" charset="utf-8" src="cordova/cordova-1.5.0.js"></script> <!-- Adding jQuery mobile and jQuery scripts & CSS --> <script type="text/javascript" src="jquery/jquery-1.7.1.min.js"></script> <link rel="stylesheet" href="jquerymobile/jquery.mobile-1.1.0-rc.1.min.css" /> <script type="text/javascript" src="jquery/jquery.validate.min.js"></script> <script type="text/javascript" src="jquerymobile/jquery.mobile-1.1.0-rc.1.min.js"></script> <link rel="stylesheet" href="css/colors.css"> <script type="text/javascript"> function page1(){ $.mobile.changePage("#page2", { transition : "slide" }); } function page2(){ $.mobile.changePage("#page1", { transition : "slide" }); } $("#page1").live("pageshow", function(e) { $.ajax({ type : 'GET', cache : false, url : "http://192.168.1.198:9051/something.xml" + "?time=" + Date.now(), data : { key : "value" }, dataType : "xml", success : function(xml) { console.log("Success Page1"); }, error : function(xhr) { } }); }); $("#page2").live("pageshow", function(e) { $.ajax({ type : 'GET', cache : false, url : "http://192.168.1.198:9051/something.xml" + "?time=" + Date.now(), data : { key : "value" }, dataType : "xml", success : function(xml) { console.log("Success Page2"); }, error : function(xhr) { } }); }); </script> <body> <div data-role="page" id="page1"> <div data-role="header">Page 1</div> <div data-role="content"> <input type="text" name="page1GetTime" id="page1GetTime" value="" /><a href="#" data-role="button" onclick="page1()" id="gotopage2"> Go to Page 2 </a> </div> </div> <div data-role="page" id="page2"> <div data-role="header">Page 2</div> <div data-role="content"> <input type="text" name="page2GetTime" id="page2GetTime" value="" /><a href="#" data-role="button" onclick="page2()" id="gotopage1">Go to Page 1</a> </div> </div> </body> Now when i click to "Go to page2" then page2 will be shown along with one ajax request .. If i keep on moving from one page to another then a ajax request is made.. This request stops responding after 4 to 5 request... Why is it happening?

  Read the article

• C++ Problem resolution - is it the best way to simulate a "tuple"?

  - by fbin

  Hi everyone! I've got the following problem: "Write a template function vectorMAXMIN() that will accept a vector and a number indicating the size of the vector and will return the max and the min values of the vector"... So i think in it... Create a class vector to avoid the "size" passing value and control the insertions and can get from this the max and min values... ( dunno if it's a good idea ) The problem is "how to return a tuple?" When i read the problem, i thought in a tuple to return "max, min values" is it correct? The code: #include <iostream> template < typename T > class _tuple { public: T _Max; T _Min; }; template < typename T > class _vector { public: _vector( int cnt = 0); ~_vector(); _tuple< T > get_tuple( void ); void insert( const T ); private: T *ptr; int cnt; int MAX; }; template < typename T > _vector< T >::_vector( int N ) { ptr = new T [N] ; MAX = N; cnt = 0; } template < typename T > _tuple<T> _vector< T >::get_tuple( void ) { _tuple< T > _mytuple; _mytuple._Max = ptr[0]; _mytuple._Min = ptr[0]; for( int i = 1; i < cnt; i++) { if( _mytuple._Max > ptr[i] ) _mytuple._Max = ptr[i]; if( _mytuple._Min < ptr[i] ) _mytuple._Min = ptr[i]; } return _mytuple; } template < typename T > void _vector< T >::insert( const T element) { if( cnt == MAX ) std::cerr << "Error: Out of range!" << std::endl; else { ptr[cnt] = element; cnt++; } } template < typename T > _vector< T >::~_vector() { delete [] ptr; } int main() { _vector< int > v; _tuple < int > t; v.insert(2); v.insert(1); v.insert(5); v.insert(0); v.insert(4); t = v.get_tuple(); std::cout << "MAX:" << t._Max; std::cout << " MIN:" << t._Min; return 0; }

  Read the article

• Parallelism in .NET – Part 9, Configuration in PLINQ and TPL

  - by Reed

  Parallel LINQ and the Task Parallel Library contain many options for configuration.  Although the default configuration options are often ideal, there are times when customizing the behavior is desirable.  Both frameworks provide full configuration support. When working with Data Parallelism, there is one primary configuration option we often need to control – the number of threads we want the system to use when parallelizing our routine.  By default, PLINQ and the TPL both use the ThreadPool to schedule tasks.  Given the major improvements in the ThreadPool in CLR 4, this default behavior is often ideal.  However, there are times that the default behavior is not appropriate.  For example, if you are working on multiple threads simultaneously, and want to schedule parallel operations from within both threads, you might want to consider restricting each parallel operation to using a subset of the processing cores of the system.  Not doing this might over-parallelize your routine, which leads to inefficiencies from having too many context switches. In the Task Parallel Library, configuration is handled via the ParallelOptions class.  All of the methods of the Parallel class have an overload which accepts a ParallelOptions argument. We configure the Parallel class by setting the ParallelOptions.MaxDegreeOfParallelism property.  For example, let’s revisit one of the simple data parallel examples from Part 2: Parallel.For(0, pixelData.GetUpperBound(0), row => { for (int col=0; col < pixelData.GetUpperBound(1); ++col) { pixelData[row, col] = AdjustContrast(pixelData[row, col], minPixel, maxPixel); } }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, we’re looping through an image, and calling a method on each pixel in the image.  If this was being done on a separate thread, and we knew another thread within our system was going to be doing a similar operation, we likely would want to restrict this to using half of the cores on the system.  This could be accomplished easily by doing: var options = new ParallelOptions(); options.MaxDegreeOfParallelism = Math.Max(Environment.ProcessorCount / 2, 1); Parallel.For(0, pixelData.GetUpperBound(0), options, row => { for (int col=0; col < pixelData.GetUpperBound(1); ++col) { pixelData[row, col] = AdjustContrast(pixelData[row, col], minPixel, maxPixel); } }); Now, we’re restricting this routine to using no more than half the cores in our system.  Note that I included a check to prevent a single core system from supplying zero; without this check, we’d potentially cause an exception.  I also did not hard code a specific value for the MaxDegreeOfParallelism property.  One of our goals when parallelizing a routine is allowing it to scale on better hardware.  Specifying a hard-coded value would contradict that goal. Parallel LINQ also supports configuration, and in fact, has quite a few more options for configuring the system.  The main configuration option we most often need is the same as our TPL option: we need to supply the maximum number of processing threads.  In PLINQ, this is done via a new extension method on ParallelQuery<T>: ParallelEnumerable.WithDegreeOfParallelism. Let’s revisit our declarative data parallelism sample from Part 6: double min = collection.AsParallel().Min(item => item.PerformComputation()); Here, we’re performing a computation on each element in the collection, and saving the minimum value of this operation.  If we wanted to restrict this to a limited number of threads, we would add our new extension method: int maxThreads = Math.Max(Environment.ProcessorCount / 2, 1); double min = collection .AsParallel() .WithDegreeOfParallelism(maxThreads) .Min(item => item.PerformComputation()); This automatically restricts the PLINQ query to half of the threads on the system. PLINQ provides some additional configuration options.  By default, PLINQ will occasionally revert to processing a query in parallel.  This occurs because many queries, if parallelized, typically actually cause an overall slowdown compared to a serial processing equivalent.  By analyzing the “shape” of the query, PLINQ often decides to run a query serially instead of in parallel.  This can occur for (taken from MSDN): Queries that contain a Select, indexed Where, indexed SelectMany, or ElementAt clause after an ordering or filtering operator that has removed or rearranged original indices. Queries that contain a Take, TakeWhile, Skip, SkipWhile operator and where indices in the source sequence are not in the original order. Queries that contain Zip or SequenceEquals, unless one of the data sources has an originally ordered index and the other data source is indexable (i.e. an array or IList(T)). Queries that contain Concat, unless it is applied to indexable data sources. Queries that contain Reverse, unless applied to an indexable data source. If the specific query follows these rules, PLINQ will run the query on a single thread.  However, none of these rules look at the specific work being done in the delegates, only at the “shape” of the query.  There are cases where running in parallel may still be beneficial, even if the shape is one where it typically parallelizes poorly.  In these cases, you can override the default behavior by using the WithExecutionMode extension method.  This would be done like so: var reversed = collection .AsParallel() .WithExecutionMode(ParallelExecutionMode.ForceParallelism) .Select(i => i.PerformComputation()) .Reverse(); Here, the default behavior would be to not parallelize the query unless collection implemented IList<T>.  We can force this to run in parallel by adding the WithExecutionMode extension method in the method chain. Finally, PLINQ has the ability to configure how results are returned.  When a query is filtering or selecting an input collection, the results will need to be streamed back into a single IEnumerable<T> result.  For example, the method above returns a new, reversed collection.  In this case, the processing of the collection will be done in parallel, but the results need to be streamed back to the caller serially, so they can be enumerated on a single thread. This streaming introduces overhead.  IEnumerable<T> isn’t designed with thread safety in mind, so the system needs to handle merging the parallel processes back into a single stream, which introduces synchronization issues.  There are two extremes of how this could be accomplished, but both extremes have disadvantages. The system could watch each thread, and whenever a thread produces a result, take that result and send it back to the caller.  This would mean that the calling thread would have access to the data as soon as data is available, which is the benefit of this approach.  However, it also means that every item is introducing synchronization overhead, since each item needs to be merged individually. On the other extreme, the system could wait until all of the results from all of the threads were ready, then push all of the results back to the calling thread in one shot.  The advantage here is that the least amount of synchronization is added to the system, which means the query will, on a whole, run the fastest.  However, the calling thread will have to wait for all elements to be processed, so this could introduce a long delay between when a parallel query begins and when results are returned. The default behavior in PLINQ is actually between these two extremes.  By default, PLINQ maintains an internal buffer, and chooses an optimal buffer size to maintain.  Query results are accumulated into the buffer, then returned in the IEnumerable<T> result in chunks.  This provides reasonably fast access to the results, as well as good overall throughput, in most scenarios. However, if we know the nature of our algorithm, we may decide we would prefer one of the other extremes.  This can be done by using the WithMergeOptions extension method.  For example, if we know that our PerformComputation() routine is very slow, but also variable in runtime, we may want to retrieve results as they are available, with no bufferring.  This can be done by changing our above routine to: var reversed = collection .AsParallel() .WithExecutionMode(ParallelExecutionMode.ForceParallelism) .WithMergeOptions(ParallelMergeOptions.NotBuffered) .Select(i => i.PerformComputation()) .Reverse(); On the other hand, if are already on a background thread, and we want to allow the system to maximize its speed, we might want to allow the system to fully buffer the results: var reversed = collection .AsParallel() .WithExecutionMode(ParallelExecutionMode.ForceParallelism) .WithMergeOptions(ParallelMergeOptions.FullyBuffered) .Select(i => i.PerformComputation()) .Reverse(); Notice, also, that you can specify multiple configuration options in a parallel query.  By chaining these extension methods together, we generate a query that will always run in parallel, and will always complete before making the results available in our IEnumerable<T>.

  Read the article

• HTC Launches HTC Mozart Windows Phone 7 In India

  - by Gopinath

  Here comes the second Windows Phone 7 device to Indian market – HTC Mozart. HTC India website has a special page for this smartphone that showcases details of the phone. The phone is not yet  widely available in retail stores across Indian and it’s expected to be available in couple of weeks. The first Windows Phone 7 smartphone released in India was also from HTC, the HTC HD7. It’s available in selected retail outlets at a price tag of  Rs. 27,885. HTC Mozart is expected to cost around Rs 30,000. Features of HTC Mozart Specs of  HTC 7 Mozart is nearly identical to HTC HD7, apart from 8 GB internal storage, 3.7 inches screen size and 8 MP camera. 3.7 inch, 480 x 800 16M colours S-LCD capacitive touchscreen. Accelerometer, Proximity sensor and pinch Zoom. 11.9mm thick and Weighs 130g. 1Ghz Qualcomm Snapdragon QSD8250 Processor. 8GB Internal Memory with no Expansion Slot. 8 MP Camera with Auto focus, Geo tagging and Xenon Flash, 720p Video recording, No secondary camera. 3G HSDPA 7.2 Mbps and HSUPA 2 Mbps, Bluetooth 2.1 with A2DP, Wi-Fi 802.11 b/g/n FM radio with RDS, GPS with A-GPS. 1300 mAh Li-Ion Battery Standby 360 h (2G) and 435 h (3G), Talk time 6 h 40 min (2G) and 5 h 30 min (3G). This article titled,HTC Launches HTC Mozart Windows Phone 7 In India, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• How to properly scroll a 2D tilemap?

  - by Sri Harsha Chilakapati

  Hello and I'm trying to make my own game engine in Java. I have completed all the necessary ones but I can't figure it out with the TileGame class. It just can't scroll. Also there are no exceptions. Here I'm listing the code. TileGame.java @Override public void draw(Graphics2D g) { if (back!=null){ back.render(g); } if (follower!=null){ follower.render(g); follower.draw(g); } for (int i=0; i<actors.size(); i++){ Actor actor = actors.get(i); if (actor!=follower&&getVisibleRect().intersects(actor.getBounds())){ g.drawImage(actor.getAnimation().getFrameImage(), actor.x - OffSetX, actor.y - OffSetY, null); actor.draw(g); } } } /** * This method returns the visible rectangle * @return The visible rectangle */ public Rectangle getVisibleRect(){ return new Rectangle(OffSetX, OffSetY, global.WIDTH, global.HEIGHT); } @Override public void update(){ if (follower!=null){ if (scrollHorizontally){ OffSetX = global.WIDTH/2 - Math.round((float)follower.x) - tileSize; OffSetX = Math.min(OffSetX, 0); OffSetX = Math.max(OffSetX, global.WIDTH - mapWidth); } if (scrollVertically){ OffSetY = global.HEIGHT/2 - Math.round((float)follower.y) - tileSize; OffSetY = Math.min(OffSetY, 0); OffSetY = Math.max(OffSetY, global.HEIGHT - mapHeight); } } for (int i=0; i<actors.size(); i++){ Actor actor1 = actors.get(i); if (getVisibleRect().contains(actor1.x, actor1.y)){ actor1.update(); for (int j=0; j<actors.size(); j++){ Actor actor2 = actors.get(j); if (actor1.isCollidingWith(actor2)){ actor1.collision(actor2); actor2.collision(actor1); } } } } } but the problem is that all the actors are working, but it just won't scroll. Help Please.. Thanks in Advance.

  Read the article

• I can't scroll my tilemap ... HELP!

  - by Sri Harsha Chilakapati

  Hello and I'm trying to make my own game engine in Java. I have completed all the necessary ones but I can't figure it out with the TileGame class. It just can't scroll. Also there are no exceptions. Here I'm listing the code. TileGame.java @Override public void draw(Graphics2D g) { if (back!=null){ back.render(g); } if (follower!=null){ follower.render(g); follower.draw(g); } for (int i=0; i<actors.size(); i++){ Actor actor = actors.get(i); if (actor!=follower&&getVisibleRect().intersects(actor.getBounds())){ g.drawImage(actor.getAnimation().getFrameImage(), actor.x - OffSetX, actor.y - OffSetY, null); actor.draw(g); } } } /** * This method returns the visible rectangle * @return The visible rectangle */ public Rectangle getVisibleRect(){ return new Rectangle(OffSetX, OffSetY, global.WIDTH, global.HEIGHT); } @Override public void update(){ if (follower!=null){ if (scrollHorizontally){ OffSetX = global.WIDTH/2 - Math.round((float)follower.x) - tileSize; OffSetX = Math.min(OffSetX, 0); OffSetX = Math.max(OffSetX, global.WIDTH - mapWidth); } if (scrollVertically){ OffSetY = global.HEIGHT/2 - Math.round((float)follower.y) - tileSize; OffSetY = Math.min(OffSetY, 0); OffSetY = Math.max(OffSetY, global.HEIGHT - mapHeight); } } for (int i=0; i<actors.size(); i++){ Actor actor1 = actors.get(i); if (getVisibleRect().contains(actor1.x, actor1.y)){ actor1.update(); for (int j=0; j<actors.size(); j++){ Actor actor2 = actors.get(j); if (actor1.isCollidingWith(actor2)){ actor1.collision(actor2); actor2.collision(actor1); } } } } } but the problem is that all the actors are working, but it just won't scroll. Help Please.. Thanks in Advance.

  Read the article

• Managing JS and CSS for a static HTML web application

  - by Josh Kelley

  I'm working on a smallish web application that uses a little bit of static HTML and relies on JavaScript to load the application data as JSON and dynamically create the web page elements from that. First question: Is this a fundamentally bad idea? I'm unclear on how many web sites and web applications completely dispense with server-side generation of HTML. (There are obvious disadvantages of JS-only web apps in the areas of graceful degradation / progressive enhancement and being search engine friendly, but I don't believe that these are an issue for this particular app.) Second question: What's the best way to manage the static HTML, JS, and CSS? For my "development build," I'd like non-minified third-party code, multiple JS and CSS files for easier organization, etc. For the "release build," everything should be minified, concatenated together, etc. If I was doing server-side generation of HTML, it'd be easy to have my web framework generate different development versus release HTML that includes multiple verbose versus concatenated minified code. But given that I'm only doing any static HTML, what's the best way to manage this? (I realize I could hack something together with ERB or Perl, but I'm wondering if there are any standard solutions.) In particular, since I'm not doing any server-side HTML generation, is there an easy, semi-standard way of setting up my static HTML so that it contains code like <script src="js/vendors/jquery.js"></script> <script src="js/class_a.js"></script> <script src="js/class_b.js"></script> <script src="js/main.js"></script> at development time and <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.8.2/jquery.min.js"></script> <script src="js/entire_app.min.js"></script> for release?

  Read the article

• BI Applications 7.9.6.3 and EBS 12.1.3 Vision: Integrated Demo Environments

  - by Mike.Hallett(at)Oracle-BI&EPM

  If you need a combined BI-Applications + eBusiness Suite Applications demonstration environment, or for proof of concept work for your customers, then these versions of images on Oracle Virtual Box are now available for partners to download and use.  To get access to these images, Partners must be OPN members, specialised in OBI or BI-Apps.   This is an integrated Demo/Test Drive/POC/Self Enablement environment including two separate images (in English) representing the entire Oracle Stack – Applications, Middleware, Database, Operating System and Virtual Machine. Minimum Hardware requirements for each image to run separately 4GB RAM Minimum Hardware requirements for both images to run concurrently 8GB RAM Dual CPU 64 bit OS   BI Applications 7.9.6.3 Linux based and running on Oracle Virtual Box and compatible with OVM Image Content: BI Application Analytics demo data extracted from EBS 12.1.3 Vision for Financials and HR using EBS 12.1.3 Vision (image supplied) Built Integration to EBS 12.1.3 Vision image (provided). Fully functional BI Applications 7.9.6.3 software install and configuration Image can be connected to load any data from any other compatible source system. BI Apps Demo data is based on OOTB EBS Vision 12.1.3 Configured to run BI Apps data load for all other modules of EBS 12.1.3 Vision. Includes OBIEE Sample demonstration content Documented scripts for running presentations, demonstrations and Test Drives Image Size: 34GB zip, 84GB unzip.  Min Hardware 4GB RAM         EBS Vision 12.1.3 Linux based and running on Oracle Virtual Box and compatible with OVM Image Content: eBusiness Suite (EBS) Applications Vision 12.1.3 Standard Vision instance with all given setups, configurations and data Source system for BI Apps 7.9.6.3 Image Size: 76GB zip, 300GB unzip.  Min Hardware 4GB RAM Distribution: The Virtual Box images are posted on an external FTP server @ BI Applications 7.9.6.3 EBS12.1.3   To download, Partners need to request the current password to access the images.  To request the current ftp.oracle.com password and the password required to unzip the images, please email Marek Winiarski   Support Contact =  Marek Winiarski: Oracle Partner Solution Consultant

  Read the article

• Slick2D + LWJGL collision system

  - by Connor W

  So I've been learning java for a while and have explored slick and lwjgl before but went away from using Slick for a while. But I've recently gone back to using it (as I'm making a platformer and Tiled will be really helpful). But here's where my problems begin: collision. I have a player polygon and I check to see if it's colliding with my tiled map with this method: public static boolean playerCollisionWith() { for(int i = 0; i < Blockmap.entities.size(); i++) { Block entity1 = (Block) Blockmap.entities.get(i); if(playerPoly.intersects(entity1.poly)) { return true; } } return false; } This would work normally but I'm using a different method for movement. Instead of just adding a speed variable to the player's x axis. I move like this: if(Keyboard.isKeyDown(Keyboard.KEY_RIGHT)) { speedX = Math.min(5, speedX + 1); moving = true; playerPoly.setX(x); if(playerCollisionWith()) { speedX = -5; playerPoly.setX(x); } } That Math.min call is what is messing me up =. I can't just call speedX = -5, because when I do the player "bounces" when the right mouse button is down and it's colliding. Bounces as in flashes back and forth REALLY quickly. But I don't really know how I would make it so that collisions on the y axis would work either, whether the player is jumping or not. So if I could get some help with how to fix this problem that would be great. Thank you for the help!

  Read the article

• How can I cull non-visible isometric tiles?

  - by james

  I have a problem which I am struggling to solve. I have a large map of around 100x100 tiles which form an isometric map. The user is able to move the map around by dragging the mouse. I am trying to optimize my game only to draw the visible tiles. So far my code is like this. It appears to be ok in the x direction, but as soon as one tile goes completely above the top of the screen, the entire column disappears. I am not sure how to detect that all of the tiles in a particular column are outside the visible region. double maxTilesX = widthOfScreen/ halfTileWidth + 4; double maxTilesY = heightOfScreen/ halfTileHeight + 4; int rowStart = Math.max(0,( -xOffset / halfTileWidth)) ; int colStart = Math.max(0,( -yOffset / halfTileHeight)); rowEnd = (int) Math.min(mapSize, rowStart + maxTilesX); colEnd = (int) Math.min(mapSize, colStart + maxTilesY); EDIT - I think I have solved my problem, but perhaps not in a very efficient way. I have taken the center of the screen coordinates, determined which tile this corresponds to by converting the coordinates into cartesian format. I then update the entire box around the screen.

  Read the article

• Finding direction of travel in a world with wrapped edges

  - by crazy

  I need to find the shortest distance direction from one point in my 2D world to another point where the edges are wrapped (like asteroids etc). I know how to find the shortest distance but am struggling to find which direction it's in. The shortest distance is given by: int rows = MapY; int cols = MapX; int d1 = abs(S.Y - T.Y); int d2 = abs(S.X - T.X); int dr = min(d1, rows-d1); int dc = min(d2, cols-d2); double dist = sqrt((double)(dr*dr + dc*dc)); Example of the world : : T : :--------------:--------- : : : S : : : : : : T : : : :--------------: In the diagram the edges are shown with : and -. I've shown a wrapped repeat of the world at the top right too. I want to find the direction in degrees from S to T. So the shortest distance is to the top right repeat of T. but how do I calculate the direction in degreed from S to the repeated T in the top right? I know the positions of both S and T but I suppose I need to find the position of the repeated T however there more than 1. The worlds coordinates system starts at 0,0 at the top left and 0 degrees for the direction could start at West. It seems like this shouldn’t be too hard but I haven’t been able to work out a solution. I hope somone can help? Any websites would be appreciated.

  Read the article

• Algorithm to shift the car

  - by Simran kaur

  I have a track that can be divided into n number of tracks and a car as GamObject. The track has transforms such that some part of the track's width lies in negative x axis and other in positive. Requirement: One move should cross one track. On every move(left or right), I want the car to reach exact centre of the next track on either sides i.e left or right. My code: Problem: : Because of negative values , somewhere I am missing out something that is making car move not in desirable positions and that's because of negative values only. variable tracks is the number of tracks the whole track is divided in. variable dist is the total width of the complete track. On left movement: if (Input.GetKeyDown (KeyCode.LeftArrow)) { if (this.transform.position.x < r.renderer.bounds.min.x + box.size.x) { this.transform.position = new Vector3 (r.renderer.bounds.min.x + Mathf.FloorToInt(box.size.x), this.transform.position.y, this.transform.position.z); } else { int tracknumber = Mathf.RoundToInt(dist - transform.position.x)/tracks; float averagedistance = (tracknumber*(dist/tracks) + (tracknumber-1)*(dist/tracks))/2; if(transform.position.x > averagedistoftracks) { amountofmovement = amountofmovement + (transform.position.x - averagedistance); } else { amountofmovement = amountofmovement - (averagedistance - transform.position.x); } this.transform.position = new Vector3 (this.transform.position.x - amountofmovement, this.transform.position.y, this.transform.position.z); } }

  Read the article

• Using Groovy Aggregate Functions in ADF BC

  - by Sireesha Pinninti

  This article explains how groovy aggregate functions(sum, count, min, max and avg) can be used in ADF Business components and demonstrates how these can be used at entity and view level Let's consider EMP and DEPT tables and an usecase to track number of employees in each department   Entity-Level To use aggregate functions at entity level, we need to have association between entities representing master and child relationship and the destination accessor name is what we are going to use in our groovy Syntax: <Accessor>.count(Groovyexpression) - Note down the destination accessor name(EMP) in the association or AccessorAttribute name in source entity - Add a transient attribute in source entity with persistent property set to false and provide the groovy expression in the syntax provided above - Finally, Add newly added attribute to view object View-Level To use aggregate functions at view level, we need to have a view link between viewobjects representing master and child relationship and the destination accessor name is what we are going to use in our groovy Syntax: <ViewLinkAccessor>.count(Groovyexpression) - Note down the destination accessor name(EmpView) in the view link or viewLinkAccessor name in source view - Add a transient attribute in view object and provide a groovy aggregate function count as a value to it in the syntax provided above Now, If you run application module tester and execute DeptView / ViewLink, you should see employee count in EmpCount field  In similar way, one can use other groovy aggregate functions sum, avg, min and max.

  Read the article

• OpenGL ES rotate texture

  - by 0xSina

  I just got started with OpenGL ES... I have a fragment: const char * sFragment = _STRINGIFY( varying highp vec2 coordinate; precision mediump float; uniform vec4 maskC; uniform float threshold; uniform sampler2D videoframe; uniform sampler2D videosprite; uniform vec4 mask; uniform vec4 maskB; uniform int recording; vec3 normalize(vec3 color, float meanr) { return color*vec3(0.75 + meanr, 1., 1. - meanr); } void main() { float d; float dB; float dC; float meanr; float meanrB; float meanrC; float minD; vec4 pixelColor; vec4 spriteColor; pixelColor = texture2D(videoframe, coordinate); spriteColor = texture2D(videosprite, coordinate); meanr = (pixelColor.r + mask.r)/8.; meanrB = (pixelColor.r + maskB.r)/8.; meanrC = (pixelColor.r + maskC.r)/8.; d = distance(normalize(pixelColor.rgb, meanr), normalize(mask.rgb, meanr)); dB = distance(normalize(pixelColor.rgb, meanrB), normalize(maskB.rgb, meanrB)); dC = distance(normalize(pixelColor.rgb, meanrC), normalize(maskC.rgb, meanrC)); minD = min(d, dB); minD = min(minD, dC); gl_FragColor = spriteColor; if (minD > threshold) { gl_FragColor = pixelColor; } } Now, depending on wether recording is 0 or 1, I want to rotate uniform sampler2D videosprite 180 degrees (reflection in x-axis, flip vertically). How can I do that? I found the function glRotatef(), but how do i specify that I want to rotate video sprite and not videoframe? Thanks

  Read the article

• How to implment the database for event conditions and item bonuses for a browser based game

  - by Saifis

  I am currently creating a browser based game, and was wondering what was the standard approach in making diverse conditions and status bonuses database wise. Currently considering two cases. Event Conditions Needs min 1000 gold Needs min Lv 10 Needs certain item. Needs fulfillment of another event Status Bonus Reduces damage by 20% +100 attack points Deflects certain type of attack I wish to be able to continually change these parameters during the process of production and operation, so having them hard-coded isn't the best way. All I could come up with are the following two methods. Method 1 Create a table that contains each conditions with needed attributes Have a model named conditions with all the attributes it would need to set them conditions condition_type (level, money_min, money_max item, event_aquired) condition_amount prerequisite_condition_id prerequisite_item_id Method 2 write it in a DSL form that could be interpreted later in the code Perhaps something like yaml, have a text area in the setting form and have the code interpret it. condition_foo: condition_type :level min_level: 10 condition_type :item item_id: 2 At current Method 2 looks to be more practical and flexible for future changes, trade off being that all the flex must be done on the code side. Not to sure how this is supposed to be done, is it supposed to be hard coded? separate config file? Any help would be appreciated. Added For additional info, it will be implemented with Ruby on Rails

  Read the article

• Does IE have more strict Javascript parsing than Chrome?

  - by Clay Shannon

  This is not meant to start a religio-technical browser war - I still prefer Chrome, at least for now, but: Because of a perhaps Chrome-related problem with my web page (see https://code.google.com/p/chromium/issues/detail?can=2&start=0&num=100&q=&colspec=ID%20Pri%20M%20Iteration%20ReleaseBlock%20Cr%20Status%20Owner%20Summary%20OS%20Modified&groupby=&sort=&id=161473), I temporarily switched to IE (10) to see if it would also view the time value as invalid. However, I didn't even get to that point - IE stopped me in my tracks before I could get there; but I found that IE was right - it is more particular/precise in validating my code. For example, I got this from IE: SCRIPT5007: The value of the property '$' is null or undefined, not a Function object ...which was referring to this: <script src="/CommonLogin/Scripts/jquery-1.9.1.min.js" type="text/javascript"></script> <script type="text/javascript"> // body sometimes becomes white???? with jquery 1.6.1 $("body").css("background-color", "#405DA7"); < This line is highlighted as the culprit: $("body").css("background-color", "#405DA7"); jQuery is referenced right above it - so why did it consider "$" to be undefined, especially when Chrome had no problem with it...ah! I looked at that location (/CommonLogin/Scripts/) and saw that, sure enough, the version of jQuery there was actually jquery-1.6.2.min.js. I added the updated jQuery file (1.9.1) and it got past this. So now the question is: why does Chrome ignore this? Does it download the referenced version from its own CDN if it can't find it in the place you specify? IE did flag other errs after that, too; so I'm thinking perhaps IE is better at catching lurking problems than, at least, Chrome is. Haven't tested Firefox diesbzg yet.

  Read the article

• Run Grunt task in Visual Studio Release Build with a bat file

  - by Aligned

  Originally posted on: http://geekswithblogs.net/Aligned/archive/2014/08/19/run-grunt-task-in-visual-studio-release-build-with-a.aspx 1. Add a BeforeBuild in your csproj file. Edit the xml with a text editor. <Target Name="BeforeBuild"> <Exec Condition="'$(Configuration)' == 'Release'" Command="script-optimize.bat" /> </Target> 2. Create the script-optimize.batREM "%~dp0" maps to the directory where this file exists cd %~dp0\..\YourProjectFolder call npm uninstall grunt call npm uninstall grunt call npm install --cache-min 604800 -g grunt-cli call npm install --cache-min 604800 grunt typescript requirejs copy less:compile less:mincompileThis grunt command will compile typescript, run the requireJs optimizer, complie and minimize less.3. Make it use the minified code when the Web.config compilation debug is set to false <!-- These CustomCollectFiles actions are used so that the Scripts-Release folder/files are included        when publishing even though they are not project references -->  <Target Name="CustomCollectFiles">    <ItemGroup>      <_CustomFiles Include="Scripts-Release\**\*" />  </ItemGroup>  </Target> That should be all you need to get a Grunt task to minify and combine JS (plus other tasks) in Visual Studio Release build with debug = false. This is a great video of Steve Sanderson talking about SPAs, npm, Knockout, Grunt, Gulp, ect. I highly recommend it.

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >