Search Results

Search found 10158 results on 407 pages for 'perl5 11'.

Page 45/407 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Is post-sudden-power-loss filesystem corruption on an SSD drive's ext3 partition "expected behavior"?

  - by Jeremy Friesner

  My company makes an embedded Debian Linux device that boots from an ext3 partition on an internal SSD drive. Because the device is an embedded "black box", it is usually shut down the rude way, by simply cutting power to the device via an external switch. This is normally okay, as ext3's journalling keeps things in order, so other than the occasional loss of part of a log file, things keep chugging along fine. However, we've recently seen a number of units where after a number of hard-power-cycles the ext3 partition starts to develop structural issues -- in particular, we run e2fsck on the ext3 partition and it finds a number of issues like those shown in the output listing at the bottom of this Question. Running e2fsck until it stops reporting errors (or reformatting the partition) clears the issues. My question is... what are the implications of seeing problems like this on an ext3/SSD system that has been subjected to lots of sudden/unexpected shutdowns? My feeling is that this might be a sign of a software or hardware problem in our system, since my understanding is that (barring a bug or hardware problem) ext3's journalling feature is supposed to prevent these sorts of filesystem-integrity errors. (Note: I understand that user-data is not journalled and so munged/missing/truncated user-files can happen; I'm specifically talking here about filesystem-metadata errors like those shown below) My co-worker, on the other hand, says that this is known/expected behavior because SSD controllers sometimes re-order write commands and that can cause the ext3 journal to get confused. In particular, he believes that even given normally functioning hardware and bug-free software, the ext3 journal only makes filesystem corruption less likely, not impossible, so we should not be surprised to see problems like this from time to time. Which of us is right? Embedded-PC-failsafe:~# ls Embedded-PC-failsafe:~# umount /mnt/unionfs Embedded-PC-failsafe:~# e2fsck /dev/sda3 e2fsck 1.41.3 (12-Oct-2008) embeddedrootwrite contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Invalid inode number for '.' in directory inode 46948. Fix<y>? yes Directory inode 46948, block 0, offset 12: directory corrupted Salvage<y>? yes Entry 'status_2012-11-26_14h13m41.csv' in /var/log/status_logs (46956) has deleted/unused inode 47075. Clear<y>? yes Entry 'status_2012-11-26_10h42m58.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47076. Clear<y>? yes Entry 'status_2012-11-26_11h29m41.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47080. Clear<y>? yes Entry 'status_2012-11-26_11h42m13.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47081. Clear<y>? yes Entry 'status_2012-11-26_12h07m17.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47083. Clear<y>? yes Entry 'status_2012-11-26_12h14m53.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47085. Clear<y>? yes Entry 'status_2012-11-26_15h06m49.csv' in /var/log/status_logs (46956) has deleted/unused inode 47088. Clear<y>? yes Entry 'status_2012-11-20_14h50m09.csv' in /var/log/status_logs (46956) has deleted/unused inode 47073. Clear<y>? yes Entry 'status_2012-11-20_14h55m32.csv' in /var/log/status_logs (46956) has deleted/unused inode 47074. Clear<y>? yes Entry 'status_2012-11-26_11h04m36.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47078. Clear<y>? yes Entry 'status_2012-11-26_11h54m45.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47082. Clear<y>? yes Entry 'status_2012-11-26_12h12m20.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47084. Clear<y>? yes Entry 'status_2012-11-26_12h33m52.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47086. Clear<y>? yes Entry 'status_2012-11-26_10h51m59.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47077. Clear<y>? yes Entry 'status_2012-11-26_11h17m09.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47079. Clear<y>? yes Entry 'status_2012-11-26_12h54m11.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47087. Clear<y>? yes Pass 3: Checking directory connectivity '..' in /etc/network/run (46948) is <The NULL inode> (0), should be /etc/network (46953). Fix<y>? yes Couldn't fix parent of inode 46948: Couldn't find parent directory entry Pass 4: Checking reference counts Unattached inode 46945 Connect to /lost+found<y>? yes Inode 46945 ref count is 2, should be 1. Fix<y>? yes Inode 46953 ref count is 5, should be 4. Fix<y>? yes Pass 5: Checking group summary information Block bitmap differences: -(208264--208266) -(210062--210068) -(211343--211491) -(213241--213250) -(213344--213393) -213397 -(213457--213463) -(213516--213521) -(213628--213655) -(213683--213688) -(213709--213728) -(215265--215300) -(215346--215365) -(221541--221551) -(221696--221704) -227517 Fix<y>? yes Free blocks count wrong for group #6 (17247, counted=17611). Fix<y>? yes Free blocks count wrong (161691, counted=162055). Fix<y>? yes Inode bitmap differences: +(47089--47090) +47093 +47095 +(47097--47099) +(47101--47104) -(47219--47220) -47222 -47224 -47228 -47231 -(47347--47348) -47350 -47352 -47356 -47359 -(47457--47488) -47985 -47996 -(47999--48000) -48017 -(48027--48028) -(48030--48032) -48049 -(48059--48060) -(48062--48064) -48081 -(48091--48092) -(48094--48096) Fix<y>? yes Free inodes count wrong for group #6 (7608, counted=7624). Fix<y>? yes Free inodes count wrong (61919, counted=61935). Fix<y>? yes embeddedrootwrite: ***** FILE SYSTEM WAS MODIFIED ***** embeddedrootwrite: ********** WARNING: Filesystem still has errors ********** embeddedrootwrite: 657/62592 files (24.4% non-contiguous), 87882/249937 blocks Embedded-PC-failsafe:~# Embedded-PC-failsafe:~# e2fsck /dev/sda3 e2fsck 1.41.3 (12-Oct-2008) embeddedrootwrite contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Directory entry for '.' in ... (46948) is big. Split<y>? yes Missing '..' in directory inode 46948. Fix<y>? yes Setting filetype for entry '..' in ... (46948) to 2. Pass 3: Checking directory connectivity '..' in /etc/network/run (46948) is <The NULL inode> (0), should be /etc/network (46953). Fix<y>? yes Pass 4: Checking reference counts Inode 2 ref count is 12, should be 13. Fix<y>? yes Pass 5: Checking group summary information embeddedrootwrite: ***** FILE SYSTEM WAS MODIFIED ***** embeddedrootwrite: 657/62592 files (24.4% non-contiguous), 87882/249937 blocks Embedded-PC-failsafe:~# Embedded-PC-failsafe:~# e2fsck /dev/sda3 e2fsck 1.41.3 (12-Oct-2008) embeddedrootwrite: clean, 657/62592 files, 87882/249937 blocks

  Read the article

• How mod_cache working with "must-revalidate" and "max-age"?

  - by Dmitriy Sosunov

  Quick question before I will explain my flow: ?an mod_cache perform revalidate with if-none-match only if max-age is expired in case if it configured in reverse proxy mode? My goal is to reduce a number of revalidation requests to our the origin server. For instance: The first request goes to the origin server and then mod_cache save a response in to the cache according to header cache-control: max-age. And only when max-age is expired then mod_cache will revalidate with if-none-match. Currently, mod_cache revalidate each request, regardless that max-age is defined or not. My configuration of Apache 2.4.3 (Windows), on linux I see the same behavior that I will show below. ServerName proxy.lo ProxyRequests Off ProxyPreserveHost Off Header set Vary "Accept, Content-Type, Content-Encoding, Accept-Language" RequestHeader set X-Forwarded-Proto "http" # modify header for user agent's Header set Cache-Control "private, no-cache, no-store, no-transform" CacheQuickHandler off CacheDefaultExpire 300 # the origin server do not provide last-modified CacheIgnoreNoLastMod On CacheIgnoreCacheControl On # the origin server define cache-control: private, no-store only for user agents # Therefore, I would like ignore those headers on the proxy server. CacheStorePrivate On CacheStoreNoStore On CacheEnable disk / CacheRoot "C:/Apache.Cache" CacheDirLevels 5 CacheDirLength 4 CacheMinExpire 15 CacheDetailHeader on CacheHeader on KeepAlive Off ProxyPass / http://origin.lo/ ProxyPassReverse / http://origin.lo/ Also, I have turned on debug log level to see how mod_cache handles a content for caching: I provided this to show that mod_proxy always decides that a content isn't fresh. Why?I provided this to show that mod_proxy always decide that a content isn't fresh. Why? max-age was provided (see below). [Sun Nov 04 11:58:42.899890 2012] [cache:debug] [pid 6492:tid 1400] cache_storage.c(624): [client 192.168.1.100:63741] AH00698: cache: Key for entity /testpage?(null) is http://proxy.lo/testpage? [Sun Nov 04 11:58:42.899890 2012] [cache_disk:debug] [pid 6492:tid 1400] mod_cache_disk.c(569): [client 192.168.1.100:63741] AH00709: Recalled cached URL info header http://proxy.lo/testpage? [Sun Nov 04 11:58:42.899890 2012] [cache_disk:debug] [pid 6492:tid 1400] mod_cache_disk.c(865): [client 192.168.1.100:63741] AH00720: Recalled headers for URL http://proxy.lo/testpage? [Sun Nov 04 11:58:42.899890 2012] [cache:debug] [pid 6492:tid 1400] cache_storage.c(320): [client 192.168.1.100:63741] AH00695: Cached response for /testpage isn't fresh. Adding/replacing conditional request headers. [Sun Nov 04 11:58:42.899890 2012] [cache:debug] [pid 6492:tid 1400] mod_cache.c(414): [client 192.168.1.100:63741] AH00757: Adding CACHE_SAVE filter for /testpage [Sun Nov 04 11:58:42.899890 2012] [cache:debug] [pid 6492:tid 1400] mod_cache.c(448): [client 192.168.1.100:63741] AH00759: Adding CACHE_REMOVE_URL filter for /testpage [Sun Nov 04 11:58:42.899890 2012] [proxy:debug] [pid 6492:tid 1400] mod_proxy.c(1068): [client 192.168.1.100:63741] AH01143: Running scheme http handler (attempt 0) [Sun Nov 04 11:58:42.899890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(1976): AH00942: HTTP: has acquired connection for (origin.lo) [Sun Nov 04 11:58:42.899890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(2029): [client 192.168.1.100:63741] AH00944: connecting http://origin.lo/testpage to origin.lo:80 [Sun Nov 04 11:58:42.901890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(2151): [client 192.168.1.100:63741] AH00947: connected /testpage to origin.lo:80 [Sun Nov 04 11:58:42.901890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(2554): AH00962: HTTP: connection complete to 192.168.1.100:80 (origin.lo) [Sun Nov 04 11:58:42.903890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(1991): AH00943: http: has released connection for (origin.lo) [Sun Nov 04 11:58:42.903890 2012] [headers:debug] [pid 6492:tid 1400] mod_headers.c(800): AH01502: headers: ap_headers_output_filter() [Sun Nov 04 11:58:42.903890 2012] [cache:debug] [pid 6492:tid 1400] mod_cache.c(1190): [client 192.168.1.100:63741] AH00769: cache: Caching url: /testpage [Sun Nov 04 11:58:42.903890 2012] [cache:debug] [pid 6492:tid 1400] mod_cache.c(1196): [client 192.168.1.100:63741] AH00770: cache: Removing CACHE_REMOVE_URL filter. [Sun Nov 04 11:58:42.904890 2012] [cache_disk:debug] [pid 6492:tid 1400] mod_cache_disk.c(1318): [client 192.168.1.100:63741] AH00737: commit_entity: Headers and body for URL http://proxy.lo/testpage? cached. The first request to the origin server without mod_proxy to http://origin.lo/ GET http://origin.lo/testpage HTTP/1.1 Host: origin.lo Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/json Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 The first response from the origin without mod_proxy HTTP/1.1 200 OK Cache-Control: must-revalidate, proxy-revalidate, max-age=30 Content-Type: application/json; charset=utf-8 ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Sun, 04 Nov 2012 10:11:01 GMT Content-Length: 1877 So, I assumed that revalidation must be occur only in 30 seconds after the success response. Is't right? Let's check it:) Within 30 sec, the Google Chrome didn't perform any requests to the origin server to revalidate a request and has return the response from local cache. When max-age is expired, the Google Chrome perform a request to revalidate: GET http://origin.lo/testpage HTTP/1.1 Host: origin.lo Connection: keep-alive Cache-Control: max-age=0 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/xml If-None-Match: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 and response: HTTP/1.1 304 Not Modified Cache-Control: must-revalidate, proxy-revalidate, max-age=30 ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Sun, 04 Nov 2012 10:16:20 GMT As you can see, all works as expected. User agent revalidates request only when max-age is expired. Let's now try perform the folling flow though mod_proxy (see configuration above). The first request: GET http://proxy.lo/testpage HTTP/1.1 Host: proxy.lo Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/json Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 and the response was: HTTP/1.1 200 OK Date: Sun, 04 Nov 2012 10:23:36 GMT Server: Apache Cache-Control: private, no-cache, no-store, no-transform Content-Type: application/json; charset=utf-8 ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Content-Length: 1932 Vary: Accept,Content-Type,Content-Encoding,Accept-Language X-Cache: MISS from proxy.lo X-Cache-Detail: "cache miss: attempting entity save" from proxy.lo Connection: close Ok, let's see to the disk cache and try to see how request and response was stored. (I cut binary data) http://proxy.lo/testpage? Cache-Control: private, no-cache, no-store, no-transform Content-Type: application/json; charset=utf-8 ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Date: Sun, 04 Nov 2012 10:27:15 GMT Content-Length: 1932 Vary: Accept, Content-Type, Content-Encoding, Accept-Language Host: proxy.lo User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/json Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 X-Forwarded-Proto: http Cache-Control: max-age=300, must-revalidate X-Forwarded-For: 192.168.1.100 X-Forwarded-Host: proxy.lo X-Forwarded-Server: origin.lo Ok, what we see? We see that the first request was performed with max-age=300 & must-revalidate Ok, looks good, as for me, lets perform the next call: GET http://proxy.lo/testpage HTTP/1.1 Host: proxy.lo Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/json Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 and the second response from mod_proxy: HTTP/1.1 200 OK Date: Sun, 04 Nov 2012 10:31:58 GMT Server: Apache Cache-Control: private, no-cache, no-store, no-transform ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Content-Length: 1932 Vary: Accept,Content-Type,Content-Encoding,Accept-Language X-Cache: REVALIDATE from proxy.lo X-Cache-Detail: "conditional cache hit: entity refreshed" from proxy.lo Connection: close Content-Type: application/json; charset=utf-8 SO, MY QUESTION IS: WHY mod_proxy perform revalidation on each request regardless that max-age is defined? N.B. Apache 2.4.3 Thanks, I would be grateful for any help.

  Read the article

• Configure PERL DBI and DBD in Linux

  - by Balualways

  I am new to Perl and I work in a Linux OEL 5x server. I am trying to configure the Perl DB modules for Oracle connectivity (DBD and DBI modules). Can anyone help me out in the installation procedure? I had tried CPAN didn't really worked out. Any help would be appreciated. I am not quite sure I need to initialize any variables other than $LD_LIBRARY_PATH and $ORACLE_HOME These are my observations: ISSUE:: I am getting the following issue while using the DBI module to connect to Oracle: install_driver(Oracle) failed: Can't locate loadable object for module DBD::Oracle in @INC (@INC contains: /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/5.8.8 .) at (eval 3) line 3 Compilation failed in require at (eval 3) line 3. Perhaps a module that DBD::Oracle requires hasn't been fully installed at connectdb.pl line 57 I had installed the DBD for oracle from /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/DBD/DBD-Oracle-1.50 Could you please take a look into the steps and correct me if I am wrong: Observations: $ echo $LD_LIBRARY_PATH /opt/CA/UnicenterAutoSysJM/autosys/lib:/opt/CA/SharedComponents/Csam/SockAdapter/lib:/opt/CA/SharedComponents/ETPKI/lib:/opt/CA/CAlib $ echo $ORACLE_HOME /usr/local/oracle/ORA This is how I tried to install the DBD module: Download the file DBD 1.50 for Oracle Copy to /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/DBD Untar and Makefile.PL . Message: Using DBI 1.52 (for perl 5.008008 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI/ Configuring DBD::Oracle for perl 5.008008 on linux (x86_64-linux-thread-multi) Remember to actually *READ* the README file! Especially if you have any problems. Installing on a linux, Ver#2.6 Using Oracle in /opt/oracle/product/10.2 DEFINE _SQLPLUS_RELEASE = "1002000400" (CHAR) Oracle version 10.2.0.4 (10.2) Found /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Found /opt/oracle/product/10.2/rdbms/demo/demo_rdbms64.mk Found /opt/oracle/product/10.2/rdbms/lib/ins_rdbms.mk Using /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Your LD_LIBRARY_PATH env var is set to '/usr/local/oracle/ORA/lib:/usr/dt/lib:/usr/openwin/lib:/usr/local/oracle/ORA/ows/cartx/wodbc/1.0/util/lib:/usr/local/oracle/ORA/lib:/usr/local/sybase/OCS-12_0/lib:/usr/local/sybase/lib:/home/oracle/jdbc/jdbcoci73/lib:./' WARNING: Your LD_LIBRARY_PATH env var doesn't include '/opt/oracle/product/10.2/lib' but probably needs to. Reading /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Reading /usr/local/oracle/ORA/rdbms/lib/env_rdbms.mk Attempting to discover Oracle OCI build rules sh: make: command not found by executing: [make -f /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk build ECHODO=echo ECHO=echo GENCLNTSH='echo genclntsh' CC=true OPTIMIZE= CCFLAGS= EXE=DBD_ORA_EXE OBJS=DBD_ORA_OBJ.o] WARNING: Oracle build rule discovery failed (32512) Add path to make command into your PATH environment variable. Oracle oci build prolog: [sh: make: command not found] Oracle oci build command: [] WARNING: Unable to interpret Oracle build commands from /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk. (Will continue by using fallback approach.) Please report this to [email protected]. See README for what to include. Found header files in /opt/oracle/product/10.2/rdbms/public. client_version=10.2 DEFINE= -Wall -Wno-comment -DUTF8_SUPPORT -DORA_OCI_VERSION=\"10.2.0.4\" -DORA_OCI_102 Checking for functioning wait.ph System: perl5.008008 linux ca-build9.us.oracle.com 2.6.20-1.3002.fc6xen #1 smp thu apr 30 18:08:39 pdt 2009 x86_64 x86_64 x86_64 gnulinux Compiler: gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm Linker: not found Sysliblist: -ldl -lm -lpthread -lnsl -lirc Oracle makefiles would have used these definitions but we override them: CC: cc CFLAGS: $(GFLAG) $(OPTIMIZE) $(CDEBUG) $(CCFLAGS) $(PFLAGS)\ $(SHARED_CFLAG) $(USRFLAGS) [$(GFLAG) -O3 $(CDEBUG) -m32 $(TRIGRAPHS_CCFLAGS) -fPIC -I/usr/local/oracle/ORA/rdbms/demo -I/usr/local/oracle/ORA/rdbms/public -I/usr/local/oracle/ORA/plsql/public -I/usr/local/oracle/ORA/network/public -DLINUX -D_GNU_SOURCE -D_LARGEFILE64_SOURCE=1 -D_LARGEFILE_SOURCE=1 -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -fno-strict-aliasing $(LPFLAGS) $(USRFLAGS)] build: $(CC) $(ORALIBPATH) -o $(EXE) $(OBJS) $(OCISHAREDLIBS) [ cc -L$(LIBHOME) -L/usr/local/oracle/ORA/rdbms/lib/ -o $(EXE) $(OBJS) -lclntsh $(EXPDLIBS) $(EXOSLIBS) -ldl -lm -lpthread -lnsl -lirc -ldl -lm $(USRLIBS) -lpthread] LDFLAGS: $(LDFLAGS32) [-m32 -o $@ -L/usr/local/oracle/ORA/rdbms//lib32/ -L/usr/local/oracle/ORA/lib32/ -L/usr/local/oracle/ORA/lib32/stubs/] Linking with /usr/local/oracle/ORA/rdbms/lib/defopt.o -lclntsh -ldl -lm -lpthread -lnsl -lirc -ldl -lm -lpthread [from $(DEF_OPT) $(OCISHAREDLIBS)] Checking if your kit is complete... Looks good LD_RUN_PATH=/usr/local/oracle/ORA/lib Using DBD::Oracle 1.50. Using DBD::Oracle 1.50. Using DBI 1.52 (for perl 5.008008 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI/ Writing Makefile for DBD::Oracle Writing MYMETA.yml and MYMETA.json *** If you have problems... read all the log printed above, and the README and README.help.txt files. (Of course, you have read README by now anyway, haven't you?)

  Read the article

• Help:Graph contest problem: maybe a modified Dijkstra or another alternative algorithm

  - by newba

  Hi you all, I'm trying to do this contest exercise about graphs: XPTO is an intrepid adventurer (a little too temerarious for his own good) who boasts about exploring every corner of the universe, no matter how inhospitable. In fact, he doesn't visit the planets where people can easily live in, he prefers those where only a madman would go with a very good reason (several millions of credits for instance). His latest exploit is trying to survive in Proxima III. The problem is that Proxima III suffers from storms of highly corrosive acids that destroy everything, including spacesuits that were especially designed to withstand corrosion. Our intrepid explorer was caught in a rectangular area in the middle of one of these storms. Fortunately, he has an instrument that is capable of measuring the exact concentration of acid on each sector and how much damage it does to his spacesuit. Now, he only needs to find out if he can escape the storm. Problem The problem consists of finding an escape route that will allow XPTOto escape the noxious storm. You are given the initial energy of the spacesuit, the size of the rectangular area and the damage that the spacesuit will suffer while standing in each sector. Your task is to find the exit sector, the number of steps necessary to reach it and the amount of energy his suit will have when he leaves the rectangular area. The escape route chosen should be the safest one (i.e., the one where his spacesuit will be the least damaged). Notice that Rodericus will perish if the energy of his suit reaches zero. In case there are more than one possible solutions, choose the one that uses the least number of steps. If there are at least two sectors with the same number of steps (X1, Y1) and (X2, Y2) then choose the first if X1 < X2 or if X1 = X2 and Y1 < Y2. Constraints 0 < E = 30000 the suit's starting energy 0 = W = 500 the rectangle's width 0 = H = 500 rectangle's height 0 < X < W the starting X position 0 < Y < H the starting Y position 0 = D = 10000 the damage sustained in each sector Input The first number given is the number of test cases. Each case will consist of a line with the integers E, X and Y. The following line will have the integers W and H. The following lines will hold the matrix containing the damage D the spacesuit will suffer whilst in the corresponding sector. Notice that, as is often the case for computer geeks, (1,1) corresponds to the upper left corner. Output If there is a solution, the output will be the remaining energy, the exit sector's X and Y coordinates and the number of steps of the route that will lead Rodericus to safety. In case there is no solution, the phrase Goodbye cruel world! will be written. Sample Input 3 40 3 3 7 8 12 11 12 11 3 12 12 12 11 11 12 2 1 13 11 11 12 2 13 2 14 10 11 13 3 2 1 12 10 11 13 13 11 12 13 12 12 11 13 11 13 12 13 12 12 11 11 11 11 13 13 10 10 13 11 12 8 3 4 7 6 4 3 3 2 2 3 2 2 5 2 2 2 3 3 2 1 2 2 3 2 2 4 3 3 2 2 4 1 3 1 4 3 2 3 1 2 2 3 3 0 3 4 10 3 4 7 6 3 3 1 2 2 1 0 2 2 2 4 2 2 5 2 2 1 3 0 2 2 2 2 1 3 3 4 2 3 4 4 3 1 1 3 1 2 2 4 2 2 1 Sample Output 12 5 1 8 Goodbye cruel world! 5 1 4 2 Basically, I think we have to do a modified Dijkstra, in which the distance between nodes is the suit's energy (and we have to subtract it instead of suming up like is normal with distances) and the steps are the ....steps made along the path. The pos with the bester binomial (Energy,num_Steps) is our "way out". Important : XPTO obviously can't move in diagonals, so we have to cut out this cases. I have many ideas, but I have such a problem implementing them... Could someone please help me thinking about this with some code or, at least, ideas? Am I totally wrong?

  Read the article

• custom listview adapter getView method being called multiple times, and in no coherent order

  - by edzillion

  I have a custom list adapter: class ResultsListAdapter extends ArrayAdapter<RecordItem> { in the overridden 'getView' method I do a print to check what position is and whether it is a convertView or not: @Override public View getView(int position, View convertView, ViewGroup parent) { System.out.println("getView " + position + " " + convertView); The output of this (when the list is first displayed, no user input as yet) 04-11 16:24:05.860: INFO/System.out(681): getView 0 null 04-11 16:24:29.020: INFO/System.out(681): getView 1 android.widget.RelativeLayout@43d415d8 04-11 16:25:48.070: INFO/System.out(681): getView 2 android.widget.RelativeLayout@43d415d8 04-11 16:25:49.110: INFO/System.out(681): getView 3 android.widget.RelativeLayout@43d415d8 04-11 16:25:49.710: INFO/System.out(681): getView 0 android.widget.RelativeLayout@43d415d8 04-11 16:25:50.251: INFO/System.out(681): getView 1 null 04-11 16:26:01.300: INFO/System.out(681): getView 2 null 04-11 16:26:02.020: INFO/System.out(681): getView 3 null 04-11 16:28:28.091: INFO/System.out(681): getView 0 null 04-11 16:37:46.180: INFO/System.out(681): getView 1 android.widget.RelativeLayout@43cff8f0 04-11 16:37:47.091: INFO/System.out(681): getView 2 android.widget.RelativeLayout@43cff8f0 04-11 16:37:47.730: INFO/System.out(681): getView 3 android.widget.RelativeLayout@43cff8f0 AFAIK, though I couldn't find it stated explicitly, getView() is only called for visible rows. Since my app starts with four visible rows at least the position numbers cycling from 0-3 makes sense. But the rest is a mess: Why is getview called for each row four times? Where are these convertViews coming from when I haven't scrolled yet? I did a bit of reseach, and without getting a good answer, I did notice that people were associating this issue with layout issues. So in case, here's the layout that contains the list: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_height="fill_parent" android:layout_width="fill_parent" android:orientation="vertical" > <TextView android:id="@+id/pageDetails" android:layout_width="fill_parent" android:layout_height="wrap_content" /> <ListView android:id="@+id/list" android:layout_width="fill_parent" android:layout_height="wrap_content" android:drawSelectorOnTop="false" /> </LinearLayout> and the layout of each individual row: <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="108dp" android:padding="4dp"> <ImageView android:id="@+id/thumb" android:layout_width="120dp" android:layout_height="fill_parent" android:layout_alignParentTop="true" android:layout_alignParentBottom="true" android:layout_alignParentLeft="true" android:layout_marginRight="8dp" android:src="@drawable/loading" /> <TextView android:id="@+id/price" android:layout_width="wrap_content" android:layout_height="18dp" android:layout_toRightOf="@id/thumb" android:layout_alignParentBottom="true" android:singleLine="true" /> <TextView android:id="@+id/date" android:layout_width="wrap_content" android:layout_height="18dp" android:layout_alignParentBottom="true" android:layout_alignParentRight="true" android:paddingRight="4dp" android:singleLine="true" /> <TextView android:id="@+id/title" android:layout_width="fill_parent" android:layout_height="wrap_content" android:textSize="17dp" android:layout_toRightOf="@id/thumb" android:layout_alignParentRight="true" android:layout_alignParentTop="true" android:paddingRight="4dp" android:layout_alignWithParentIfMissing="true" android:gravity="center" /> Thank you for your time

  Read the article

• sql: Group by x,y,z; return grouped by x,y with lowest f(z)

  - by Sai Emrys

  This is for http://cssfingerprint.com I collect timing stats about how fast the different methods I use perform on different browsers, etc., so that I can optimize the scraping speed. Separately, I have a report about what each method returns for a handful of URLs with known-correct values, so that I can tell which methods are bogus on which browsers. (Each is different, alas.) The related tables look like this: CREATE TABLE `browser_tests` ( `id` int(11) NOT NULL AUTO_INCREMENT, `bogus` tinyint(1) DEFAULT NULL, `result` tinyint(1) DEFAULT NULL, `method` varchar(255) DEFAULT NULL, `url` varchar(255) DEFAULT NULL, `os` varchar(255) DEFAULT NULL, `browser` varchar(255) DEFAULT NULL, `version` varchar(255) DEFAULT NULL, `created_at` datetime DEFAULT NULL, `updated_at` datetime DEFAULT NULL, `user_agent` varchar(255) DEFAULT NULL, PRIMARY KEY (`id`) ) ENGINE=InnoDB AUTO_INCREMENT=33784 DEFAULT CHARSET=latin1 CREATE TABLE `method_timings` ( `id` int(11) NOT NULL AUTO_INCREMENT, `method` varchar(255) DEFAULT NULL, `batch_size` int(11) DEFAULT NULL, `timing` int(11) DEFAULT NULL, `os` varchar(255) DEFAULT NULL, `browser` varchar(255) DEFAULT NULL, `version` varchar(255) DEFAULT NULL, `user_agent` varchar(255) DEFAULT NULL, `created_at` datetime DEFAULT NULL, `updated_at` datetime DEFAULT NULL, PRIMARY KEY (`id`) ) ENGINE=InnoDB AUTO_INCREMENT=28849 DEFAULT CHARSET=latin1 (user_agent is broken down pre-insert into browser, version, and os from a small list of recognized values using regex; I keep the original user-agent string just in case.) I have a query like this that tells me the average timing for every non-bogus browser / version / method tuple: select c, avg(bogus) as bog, timing, method, browser, version from browser_tests as b inner join ( select count(*) as c, round(avg(timing)) as timing, method, browser, version from method_timings group by browser, version, method having c > 10 order by browser, version, timing ) as t using (browser, version, method) group by browser, version, method having bog < 1 order by browser, version, timing; Which returns something like: c bog tim method browser version 88 0.8333 184 reuse_insert Chrome 4.0.249.89 18 0.0000 238 mass_insert_width Chrome 4.0.249.89 70 0.0400 246 mass_insert Chrome 4.0.249.89 70 0.0400 327 mass_noinsert Chrome 4.0.249.89 88 0.0556 367 reuse_reinsert Chrome 4.0.249.89 88 0.0556 383 jquery Chrome 4.0.249.89 88 0.0556 863 full_reinsert Chrome 4.0.249.89 187 0.0000 105 jquery Chrome 5.0.307.11 187 0.8806 109 reuse_insert Chrome 5.0.307.11 123 0.0000 110 mass_insert_width Chrome 5.0.307.11 176 0.0000 231 mass_noinsert Chrome 5.0.307.11 176 0.0000 237 mass_insert Chrome 5.0.307.11 187 0.0000 314 reuse_reinsert Chrome 5.0.307.11 187 0.0000 372 full_reinsert Chrome 5.0.307.11 12 0.7500 82 reuse_insert Chrome 5.0.335.0 12 0.2500 102 jquery Chrome 5.0.335.0 [...] I want to modify this query to return only the browser/version/method with the lowest timing - i.e. something like: 88 0.8333 184 reuse_insert Chrome 4.0.249.89 187 0.0000 105 jquery Chrome 5.0.307.11 12 0.7500 82 reuse_insert Chrome 5.0.335.0 [...] How can I do this, while still returning the method that goes with that lowest timing? I could filter it app-side, but I'd rather do this in mysql since it'd work better with my caching.

  Read the article

• Can't configure PAM + LDAP on Debian Lenny - Getting error=49 on server logs

  - by Jorge Suárez de Lis

  I've been migrating some servers and desktops using Ubuntu 10.04 from getting the users from an old OpenLDAP implementation to a newer Centos Active Directory. I haven't had any problems so far, until I reached a Debian Lenny server. I've set up the server as the others, setting /etc/ldap.conf and /etc/ldap/ldap.conf. However, when I issue "getent passwd", I get nothing from the LDAP server. Reading the pam_ldap manpage, I realized that /etc/ldap.conf was not an accepted file by pam_ldap -it worked with Ubuntu though-, so I renamed it to /etc/pam_ldap.conf. Same result. However, once I've changed the name of this file, when I login using SSH I get this on the LDAP server logs: [20/Jul/2012:11:19:40 +0200] conn=16501 fd=155 slot=155 connection from x.x.x.50 to 10.1.176.237 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 RESULT err=49 tag=97 nentries=0 etime=0 The password isn't working. I don't know that could be wrong, anything else seems to be OK. That user/password is working from another clients: [20/Jul/2012:11:29:39 +0200] conn=16528 fd=188 slot=188 connection from x.x.x.224 to 10.1.176.237 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=jorge.suarez,ou=people,ou=citius,dc=inv,dc=usc,dc=es" I'm using SSHA for storing passwords on the LDAP server. Maybe this is not supported by Debian Lenny? On pam_ldap.conf, I've set up this, as in all the other servers: # Do not hash the password at all; presume # the directory server will do it, if # necessary. This is the default. pam_password md5 Also tried clear, but it didn't work. Anyways, it's weird that issuing getent passwd still gets me no users. However, if I use pamtest from the package libpam-dotfile to test login, it works. # pamtest ssh jorge.suarez Trying to authenticate <jorge.suarez> for service <ssh>. Password: Authentication successful. # pamtest foo jorge.suarez Trying to authenticate <jorge.suarez> for service <foo>. Password: Authentication successful. But "su" won't work also: # su jorge.suarez Id. descoñecido: jorge.suarez Just the output from getent passwd : # getent passwd root:x:0:0:root:/root:/bin/bash daemon:x:1:1:daemon:/usr/sbin:/bin/sh bin:x:2:2:bin:/bin:/bin/sh sys:x:3:3:sys:/dev:/bin/sh sync:x:4:65534:sync:/bin:/bin/sync games:x:5:60:games:/usr/games:/bin/sh man:x:6:12:man:/var/cache/man:/bin/sh lp:x:7:7:lp:/var/spool/lpd:/bin/sh mail:x:8:8:mail:/var/mail:/bin/sh news:x:9:9:news:/var/spool/news:/bin/sh uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh proxy:x:13:13:proxy:/bin:/bin/sh www-data:x:33:33:www-data:/var/www:/bin/sh backup:x:34:34:backup:/var/backups:/bin/sh list:x:38:38:Mailing List Manager:/var/list:/bin/sh irc:x:39:39:ircd:/var/run/ircd:/bin/sh gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh nobody:x:65534:65534:nobody:/nonexistent:/bin/sh libuuid:x:100:101::/var/lib/libuuid:/bin/sh Debian-exim:x:101:103::/var/spool/exim4:/bin/false statd:x:102:65534::/var/lib/nfs:/bin/false sshd:x:104:65534::/var/run/sshd:/usr/sbin/nologin luser:x:1000:1000:Usuario local de Burdeos,,,:/home/luser:/bin/bash messagebus:x:105:107::/var/run/dbus:/bin/false sge-admin:x:1001:1001:Administrador do SGE,,,:/home/cluster/sge-admin:/bin/bash ntp:x:107:110::/home/ntp:/bin/false haldaemon:x:108:111:Hardware abstraction layer,,,:/var/run/hald:/bin/false vde2-net:x:109:114::/var/run/vde2:/bin/false uml-net:x:110:115::/home/uml-net:/bin/false polkituser:x:111:116:PolicyKit,,,:/var/run/PolicyKit:/bin/false Debian-pxe:x:113:65534:Dummy user for Debian pxe package,,,:/home/Debian-pxe:/bin/false Nscd was stopped from the beginning.

  Read the article

• Convert JSON structure

  - by Scobal

  I have a set of data in one JSON structure: [[task1, 10, 99], [task2, 10, 99], [task3, 10, 99], [task1, 11, 99], [task2, 11, 99], [task3, 11, 99]] and need to convert it to another JSON structure: [{ label: "task1", data: [[10, 99], [11, 99]] }, { label: "task2", data: [[10, 99], [11, 99]] }, { label: "task3", data: [[10, 99], [11, 99]] }] What's the best way to do this with javascript/java?

  Read the article

• Custom listbox sorting

  - by Arcadian

  I need to sort the data contained within a number of listboxes. The user will be able to select between two different types of sorting using radio boxes, one of which is checked by default on form load. I have created the IF statements needed in order to test whether the checked condition is true for that radio button. but i need some help to create the custom sort algorithms. Each list with contain similar looking data, the only difference in the prefix with which each line starts. For example each line in the first listbox starts with the prefix "G30" and the second listbox will be "G31" and so on. There are 10 listboxes in total (G30-G39 in terms of prefixes). The first search algorithm has to sort the lines by the number order of the first 13 chars. Example: This is how the data looks before sorting G35:45:58:11 JG07 G35:45:20:41 JG01 G35:58:20:21 JG03 G35:66:22:20 JG05 G35:45:85:21 JG02 G35:64:56:11 JG03 G35:76:35:11 JG02 G35:77:97:12 JG03 G35:54:29:11 JG01 G35:55:51:20 JG01 G35:76:24:20 JG06 G35:76:55:11 JG01 and this is how it should look after sorting G35:45:20:41 JG01 G35:45:58:11 JG07 G35:45:85:21 JG02 G35:54:29:11 JG01 G35:55:51:20 JG01 G35:58:20:21 JG03 G35:64:56:11 JG03 G35:66:22:20 JG05 G35:76:24:20 JG06 G35:76:35:11 JG02 G35:76:55:11 JG01 G35:77:97:12 JG03 as you can see, the prefixes are the same. so it is sorted, lowest first, by the next pair integers, then the next pair and the next but not by the value after "JG". the second sort algorithm will ignore the first 13 chars and sort by order of the value after "JG", highest first. any help? theres some rep in it for you :) thanks in advance

  Read the article

• Cannot connect puppet agent to puppet master

  - by u123

  I have installed puppet 3.3.1 on a debian 7 machine (test-puppet-master) and the puppet agent on another debian 7 machine (test-puppet-agent/192.11.80.246) acting as a client. I start the master with: puppet master --verbose --no-daemonize And I start the agent with: puppet agent --server=test-puppet-master --no-daemonize --verbose Notice: Did not receive certificate which gives the following output on the master: Notice: Starting Puppet master version 3.3.1 Error: Could not resolve 192.11.80.246: no name for 192.11.80.246 Info: Inserting default '~ ^/catalog/([^/]+)$' (auth true) ACL Info: Inserting default '~ ^/node/([^/]+)$' (auth true) ACL Info: Inserting default '/file' (auth ) ACL Info: Inserting default '/certificate_revocation_list/ca' (auth true) ACL Info: Inserting default '~ ^/report/([^/]+)$' (auth true) ACL Info: Inserting default '/certificate/ca' (auth any) ACL Info: Inserting default '/certificate/' (auth any) ACL Info: Inserting default '/certificate_request' (auth any) ACL Info: Inserting default '/status' (auth true) ACL Info: Not Found: Could not find certificate test-puppet-agent Error: Could not resolve 192.11.80.246: no name for 192.11.80.246 Info: Not Found: Could not find certificate test-puppet-agent Error: Could not resolve 192.11.80.246: no name for 192.11.80.246 Info: Not Found: Could not find certificate test-puppet-agent Any ideas why the agent cannot connect?

  Read the article

• Search SQL Question Between Related Two Tables

  - by mTuran

  Hi, I am writing some kind of search engine for my web application and i have a problem. I have 2 tables first of is projects table: PROJECTS TABLE id int(11) NO PRI NULL auto_increment employer_id int(11) NO MUL NULL project_title varchar(100) NO MUL NULL project_description text NO NULL project_budget int(11) NO NULL project_allowedtime int(11) NO NULL project_deadline datetime NO NULL total_bids int(11) NO NULL average_bid int(11) NO NULL created datetime NO MUL NULL active tinyint(1) NO MUL NULL PROJECTS_SKILLS TABLE project_id int(11) NO MUL NULL skill_id int(11) NO MUL NULL For example: I want ask this query to database: 1-) Skills are 5 and 7. 2-) Order results by created 3-) project title contains "php" word. 4-) Returned rows should contain projects.* columuns. 5-) Projects should be distinct(i don't want same projects in return of query). Please write sql query that ensure these conditions. Thank You.

  Read the article

• In PHP given a month string such as "November" how can I return 11 without using a 12 part switch st

  - by stormist

  I.e. Month Returns January 1 February 2 March 3 April 4 May 5 June 6 July 7 August 8 September 9 October 10 November 11 December 12 I've seen examples using mktime when given the number of the month and returning the month string, but not the reverse.

  Read the article

• How to return output from .Net Dll to the calling Application

  - by sachin

  I have to create one VB.Net Dll for VB.Net Application.In DLL there will be function to calculate the fee based on some parameter which I pass when call the function from appllication, output of calculated fee would be this type **Validations are not selected. Rate information: IN:11/14/20113:12:38 PM; OUT:11/15/20113:12:38 PM; Fee:3; Description:$3 Fixed IN:11/14/20113:12:38 PM; OUT:11/15/20113:12:38 PM; Fee:1; Description:$1 Fixed Sub Total: IN: 11/14/20113:12:38 PM; OUT: 11/15/20113:12:38 PM; Fee:4; Description: Rate Group1 Rate information: IN:11/14/20113:12:38 PM; OUT:11/15/20113:12:38 PM; Fee:3; Description:$3 Fixed Sub Total: IN: 11/14/20113:12:38 PM; OUT: 11/15/20113:12:38 PM; Fee:3; Description: Rate Group1** Can anybody tell me how can I return output of this type to the application ,so that I can use it in that application.

  Read the article

• Opera 10 supports html5 audio tag but Opera 11?

  - by tengyong

  I have been working on a HTML5 project and I recently noticed Opera 10.60 supports audio tag perfectly but not latest version of Opera (version 11.00 build 1156). you may try with URL: http://moztw.org/demo/audioplayer/ with Opera 11.00. I can see the audio player without problem but it just doesn't play the music. My HTML code is as simple as :- <audio controls src="media/vincent.ogg" type="audio/ogg"></audio>

  Read the article

• How should I interpret site analytics with 11 pageviews in an 3 second visit?

  - by Juank

  I'm using google analytics and recently i've noticed some weird trends going on. I have a lot of visits that last mere seconds but mark several page views... more than a normal human can see in that range of time. A specific case is that the only visitor from Ireland i've had until now recorded 11 pageviews in a 3 second visit. Are these crawlers? Shouldn't google analytics filter those out?

  Read the article

• How do I emulate pressing F-11 in a browser using Javascript?

  - by Itay Moav

  How do I emulate pressing F-11 in a browser using Javascript? (I assume it will be different in Chrome,IE and FF?)

  Read the article

• OWB 11gR2 - Windows and Linux 64-bit clients available

  - by David Allan

  In addition to the integrated release of OWB in the 11.2.0.3 Oracle database distribution, the following 64-bit standalone clients are now available for download from Oracle Support. OWB 11.2.0.3 Standalone client for Windows 64-bit - 13365470 OWB 11.2.0.3 Standalone client for Linux X86 64-bit - 13366327 This is in addition to the previously released 32-bit client on Windows. OWB 11.2.0.3 Standalone client for Windows 32-bit - 13365457 The support document Major OWB 11.2.0.3 New Features Summary has details for OWB 11.2.0.3 which include the following. Exadata v2 and oracle Database 11gR2 support capabilities; Support for Oracle Database 11gR2 and Exadata compression types Even more partitioning: Range-Range, Composite Hash/List, System, Reference Transparent Data Encryption support Data Guard support/certification Compiled PL/SQL code generation Capabilities to support data warehouse ETL best practices; Read and write Oracle Data Pump files with external tables External table preprocessor Partition specific DML Bulk data movement code templates: Oracle, IBM DB2, Microsoft SQL Server to Oracle Integration with Fusion Middleware capabilities; Support OWB's Control Center Agent on WLS Lots of interesting capabilities in 11.2.0.3 and the availability of the 64-bit client I'm sure is welcome news for many!

  Read the article

• Clusterware 11gR2 &ndash; Setting up an Active/Passive failover configuration

  - by Gilles Haro

  Oracle is providing a large range of interesting solutions to ensure High Availability of the database. Dataguard, RAC or even both configurations (as recommended by Oracle for a Maximum Available Architecture - MAA) are the most frequently found and used solutions. But, when it comes to protecting a system with an Active/Passive architecture with failover capabilities, people often thinks to other expensive third party cluster systems. Oracle Clusterware technology, which comes along at no extra-cost with Oracle Database or Oracle Unbreakable Linux, is - in the knowing of most people - often linked to Oracle RAC and therefore, is seldom used to implement failover solutions. Oracle Clusterware 11gR2  (a part of Oracle 11gR2 Grid Infrastructure)  provides a comprehensive framework to setup automatic failover configurations. It is actually possible to make "failover-able'", and then to protect, almost any kind of application (from the simple xclock to the most complex Application Server). Quoting Oracle: “Oracle Clusterware is a portable cluster software that allows clustering of single servers so that they cooperate as a single system. Oracle Clusterware also provides the required infrastructure for Oracle Real Application Clusters (RAC). In addition Oracle Clusterware enables the protection of any Oracle application or any other kind of application within a cluster.” In the next couple of lines, I will try to present the different steps to achieve this goal : Have a fully operational 11gR2 database protected by automatic failover capabilities. I assume you are fluent in installing Oracle Database 11gR2, Oracle Grid Infrastructure 11gR2 on a Linux system and that ASM is not a problem for you (as I am using it as a shared storage). If not, please have a look at Oracle Documentation. As often, I made my tests using an Oracle VirtualBox environment. The scripts are tested and functional on my system. Unfortunately, there can always be a typo or a mistake. This blog entry does not replace a course around the Clusterware Framework. I just hope it will let you see how powerful it is and that it will give you the whilst to go further with it...  Note : This entry has been revised (rev.2) following comments from Philip Newlan. Prerequisite 2 Linux boxes (OELCluster01 and OELCluster02) at the same OS level. I used OEL 5 Update 5 with an Enterprise Kernel. Shared Storage (SAN). On my VirtualBox system, I used Openfiler to simulate the SAN Oracle 11gR2 Database (11.2.0.1) Oracle 11gR2 Grid Infrastructure (11.2.0.1)   Step 1 - Install the software Using asmlib, create 3 ASM disks (ASM_CRS, ASM_DTA and ASM_FRA) Install Grid Infrastructure for a cluster (OELCluster01 and OELCluster02 are the 2 nodes of the cluster) Use ASM_CRS to store Voting Disk and OCR. Use SCAN. Install Oracle Database Standalone binaries on both nodes. Use asmca to check/mount the disk groups on 2 nodes Use dbca to create and configure a database on the primary node Let's name it DB11G. Copy the pfile, password file to the second node. Create adump directoty on the second node.   Step 2 - Setup the resource to be protected After its creation with dbca, the database is automatically protected by the Oracle Restart technology available with Grid Infrastructure. Consequently, it restarts automatically (if possible) after a crash (ex: kill -9 smon). A database resource has been created for that in the Cluster Registry. We can observe this with the command : crsctl status resource that shows and ora.dba11g.db entry. Let's save the definition of this resource, for future use : mkdir -p /crs/11.2.0/HA_scripts chown oracle:oinstall /crs/11.2.0/HA_scripts crsctl status resource ora.db11g.db -p > /crs/11.2.0/HA_scripts/myResource.txt Although very interesting, Oracle Restart is not cluster aware and cannot restart the database on any other node of the cluster. So, let's remove it from the OCR definitions, we don't need it ! srvctl stop database -d DB11G srvctl remove database -d DB11G Instead of it, we need to create a new resource of a more general type : cluster_resource. Here are the steps to achieve this : Create an action script :  /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh #!/bin/bash export ORACLE_HOME=/oracle/product/11.2.0/dbhome_1 export ORACLE_SID=DB11G case $1 in 'start')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   startup EOF   RET=0   ;; 'stop')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   shutdown immediate EOF   RET=0   ;; 'clean')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   shutdown abort    ##for i in `ps -ef | grep -i $ORACLE_SID | awk '{print $2}' ` ;do kill -9 $i; done EOF   RET=0   ;; 'check')    ok=`ps -ef | grep smon | grep $ORACLE_SID | wc -l`    if [ $ok = 0 ]; then      RET=1    else      RET=0    fi    ;; '*')      RET=0   ;; esac if [ $RET -eq 0 ]; then    exit 0 else    exit 1 fi   This script must provide, at least, methods to start, stop, clean and check the database. It is self-explaining and contains nothing special. Just be aware that it must be runnable (+x), it runs as Oracle user (because of the ACL property - see later) and needs to know about the environment. Also make sure it exists on every node of the cluster. Moreover, as of 11.2, the clean method is mandatory. It must provide the “last gasp clean up”, for example, a shutdown abort or a kill –9 of all the remaining processes. chmod +x /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh scp  /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh   oracle@OELCluster02:/crs/11.2.0/HA_scripts Create a new resource file, based on the information we got from previous  myResource.txt . Name it myNewResource.txt. myResource.txt  is shown below. As we can see, it defines an ora.database.type resource, named ora.db11g.db. A lot of properties are related to this type of resource and do not need to be used for a cluster_resource. NAME=ora.db11g.db TYPE=ora.database.type ACL=owner:oracle:rwx,pgrp:oinstall:rwx,other::r-- ACTION_FAILURE_TEMPLATE= ACTION_SCRIPT= ACTIVE_PLACEMENT=1 AGENT_FILENAME=%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX% AUTO_START=restore CARDINALITY=1 CHECK_INTERVAL=1 CHECK_TIMEOUT=600 CLUSTER_DATABASE=false DB_UNIQUE_NAME=DB11G DEFAULT_TEMPLATE=PROPERTY(RESOURCE_CLASS=database) PROPERTY(DB_UNIQUE_NAME= CONCAT(PARSE(%NAME%, ., 2), %USR_ORA_DOMAIN%, .)) ELEMENT(INSTANCE_NAME= %GEN_USR_ORA_INST_NAME%) DEGREE=1 DESCRIPTION=Oracle Database resource ENABLED=1 FAILOVER_DELAY=0 FAILURE_INTERVAL=60 FAILURE_THRESHOLD=1 GEN_AUDIT_FILE_DEST=/oracle/admin/DB11G/adump GEN_USR_ORA_INST_NAME= GEN_USR_ORA_INST_NAME@SERVERNAME(oelcluster01)=DB11G HOSTING_MEMBERS= INSTANCE_FAILOVER=0 LOAD=1 LOGGING_LEVEL=1 MANAGEMENT_POLICY=AUTOMATIC NLS_LANG= NOT_RESTARTING_TEMPLATE= OFFLINE_CHECK_INTERVAL=0 ORACLE_HOME=/oracle/product/11.2.0/dbhome_1 PLACEMENT=restricted PROFILE_CHANGE_TEMPLATE= RESTART_ATTEMPTS=2 ROLE=PRIMARY SCRIPT_TIMEOUT=60 SERVER_POOLS=ora.DB11G SPFILE=+DTA/DB11G/spfileDB11G.ora START_DEPENDENCIES=hard(ora.DTA.dg,ora.FRA.dg) weak(type:ora.listener.type,uniform:ora.ons,uniform:ora.eons) pullup(ora.DTA.dg,ora.FRA.dg) START_TIMEOUT=600 STATE_CHANGE_TEMPLATE= STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DTA.dg,shutdown:ora.FRA.dg) STOP_TIMEOUT=600 UPTIME_THRESHOLD=1h USR_ORA_DB_NAME=DB11G USR_ORA_DOMAIN=haroland USR_ORA_ENV= USR_ORA_FLAGS= USR_ORA_INST_NAME=DB11G USR_ORA_OPEN_MODE=open USR_ORA_OPI=false USR_ORA_STOP_MODE=immediate VERSION=11.2.0.1.0 I removed database type related entries from myResource.txt and modified some other to produce the following myNewResource.txt. Notice the NAME property that should not have the ora. prefix Notice the TYPE property that is not ora.database.type but cluster_resource. Notice the definition of ACTION_SCRIPT. Notice the HOSTING_MEMBERS that enumerates the members of the cluster (as returned by the olsnodes command). NAME=DB11G.db TYPE=cluster_resource DESCRIPTION=Oracle Database resource ACL=owner:oracle:rwx,pgrp:oinstall:rwx,other::r-- ACTION_SCRIPT=/crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh PLACEMENT=restricted ACTIVE_PLACEMENT=0 AUTO_START=restore CARDINALITY=1 CHECK_INTERVAL=10 DEGREE=1 ENABLED=1 HOSTING_MEMBERS=oelcluster01 oelcluster02 LOGGING_LEVEL=1 RESTART_ATTEMPTS=1 START_DEPENDENCIES=hard(ora.DTA.dg,ora.FRA.dg) weak(type:ora.listener.type,uniform:ora.ons,uniform:ora.eons) pullup(ora.DTA.dg,ora.FRA.dg) START_TIMEOUT=600 STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DTA.dg,shutdown:ora.FRA.dg) STOP_TIMEOUT=600 UPTIME_THRESHOLD=1h Register the resource. Take care of the resource type. It needs to be a cluster_resource and not a ora.database.type resource (Oracle recommendation) .   crsctl add resource DB11G.db  -type cluster_resource -file /crs/11.2.0/HA_scripts/myNewResource.txt Step 3 - Start the resource crsctl start resource DB11G.db This command launches the ACTION_SCRIPT with a start and a check parameter on the primary node of the cluster. Step 4 - Test this We will test the setup using 2 methods. crsctl relocate resource DB11G.db This command calls the ACTION_SCRIPT  (on the two nodes)  to stop the database on the active node and start it on the other node. Once done, we can revert back to the original node, but, this time we can use a more "MS$ like" method :Turn off the server on which the database is running. After short delay, you should observe that the database is relocated on node 1. Conclusion Once the software installed and the standalone database created (which is a rather common and usual task), the steps to reach the objective are quite easy : Create an executable action script on every node of the cluster. Create a resource file. Create/Register the resource with OCR using the resource file. Start the resource. This solution is a very interesting alternative to licensable third party solutions. References Clusterware 11gR2 documentation Oracle Clusterware Resource Reference Clusterware for Unbreakable Linux Using Oracle Clusterware to Protect A Single Instance Oracle Database 11gR1 (to have an idea of complexity) Oracle Clusterware on OTN   Gilles Haro Technical Expert - Core Technology, Oracle Consulting   

  Read the article

• Remove IP address from the URL of website using apache

  - by sapatos

  I'm on an EC2 instance and have a domain domain.com linked to the EC2 nameservers and it happily is serving my pages if I type domain.com in the URL. However when the page is served it resolves the url to: 1.1.1.10/directory/page.php. Using apache I've set up the following VirtualHost, following examples provided at http://httpd.apache.org/docs/2.0/dns-caveats.html Listen 80 NameVirtualHost 1.1.1.10:80 <VirtualHost 1.1.1.10:80> DocumentRoot /var/www/html/directory ServerName domain.com # Other directives here ... <FilesMatch "\.(ico|pdf|flv|jpg|jpeg|png|gif|js|css|swf)$"> Header set Cache-Control "max-age=290304000, public" </FilesMatch> </VirtualHost> However I'm not getting any changes to how the URL is displayed. This is the only VirtualHost configured on this site and I've confirmed its the one being used as I've managed to break it a number of times whilst experimenting with the configuration. The route53 entries I have are: domain.com A 1.1.1.10 domain.com NS ns-11.awsdns-11.com ns-111.awsdns-11.net ns-1111.awsdns-11.org ns-1111.awsdns-11.co.uk domain.com SOA ns-11.awsdns-11.com. awsdns-hostmaster.amazon.com. 1 1100 100 1101100 11100

  Read the article

• Clusterware 11gR2 &ndash; Setting up an Active/Passive failover configuration

  - by Gilles Haro

  Oracle provides many interesting ways to ensure High Availability. Dataguard configurations, RAC configurations or even both (as recommended for a Maximum Available Architecture - MAA) are the most frequently found. But when it comes to protecting a system with an Active/Passive architecture with failover capabilities, one often thinks to expensive third party cluster systems. Oracle Clusterware technology, which comes free with Oracle Database, is – in the knowing of most people - often linked to Oracle RAC and therefore, is rarely used to implement failover solutions. 11gR2 Clusterware – which is part of Oracle Grid Infrastructure - provides a comprehensive framework to setup automatic failover configurations. It is actually possible to make “failover-able'” and, therefore to protect, almost every kind of application (from xclock to the more complex Application Server) In the next couple of lines, I will try to present the different steps to achieve this goal : Have a fully operational 11gR2 database protected by automatic failover capabilities. I assume you are fluent in installing Oracle Database 11gR2, Oracle Grid Infrastructure 11gR2 on a Linux system and that ASM is not a problem for you (as I am using it as a shared storage). If not, please have a look at Oracle Documentation. As often, I made my tests using an Oracle VirtualBox environment. The scripts are tested and functional. Unfortunately, there can always be a typo or a mistake. This blog entry is not a course around the Clusterware Framework. I just hope it will let you see how powerful it is and that it will give you the whilst to go further with it…   Prerequisite 2 Linux boxes (OELCluster01 and OELCluster02) at the same OS level. I used OEL 5 Update 5 with Enterprise Kernel. Shared Storage (SAN). On my VirtualBox system, I used Openfiler to simulate the SAN Oracle 11gR2 Database (11.2.0.1) Oracle 11gR2 Grid Infrastructure (11.2.0.1)   Step 1 – Install the software Using asmlib, create 3 ASM disks (ASM_CRS, ASM_DTA and ASM_FRA) Install Grid Infrastructure for a cluster (OELCluster01 and OELCluster02 are the 2 nodes of the cluster) Use ASM_CRS to store Voting Disk and OCR. Use SCAN. Install Oracle Database Standalone binaries on both nodes. Use asmca to check/mount the disk groups on 2 nodes Use dbca to create and configure a database on the primary node Let’s name it DB11G. Copy the pfile, password file to the second node. Create adump directoty on the second node.   Step 2 - Setup the resource to be protected After its creation with dbca, the database is automatically protected by the Oracle Restart technology available with Grid Infrastructure. Consequently, it restarts automatically (if possible) after a crash (ex: kill –9 smon). A database resource has been created for that in the Cluster Registry. We can observe this with the command : crsctl status resource that shows and ora.dba11g.db entry. Let’s save the definition of this resource, for future use : mkdir –p /crs/11.2.0/HA_scripts chown oracle:oinstall /crs/11.2.0/HA_scripts crsctl status resource ora.db11g.db -p > /crs/11.2.0/HA_scripts/myResource.txt Although very interesting, Oracle Restart is not cluster aware and cannot restart the database on any other node of the cluster. So, let’s remove it from the OCR definitions, we don’t need it ! srvctl stop database -d DB11G srvctl remove database -d DB11G Instead of it, we need to create a new resource of a more general type : cluster_resource. Here are the steps to achieve this : Create an action script :  /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh #!/bin/bash export ORACLE_HOME=/oracle/product/11.2.0/dbhome_1 export ORACLE_SID=DB11G case $1 in 'start')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   startup EOF   RET=0   ;; 'stop')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   shutdown immediate EOF   RET=0   ;; 'check')    ok=`ps -ef | grep smon | grep $ORACLE_SID | wc -l`    if [ $ok = 0 ]; then      RET=1    else      RET=0    fi    ;; '*')      RET=0   ;; esac if [ $RET -eq 0 ]; then    exit 0 else    exit 1 fi   This script must provide, at least, methods to start, stop and check the database. It is self-explaining and contains nothing special. Just be aware that it is run as Oracle user (because of the ACL property – see later) and needs to know about the environment. It also needs to be present on every node of the cluster. chmod +x /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh scp  /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh   oracle@OELCluster02:/crs/11.2.0/HA_scripts Create a new resource file, based on the information we got from previous  myResource.txt . Name it myNewResource.txt. myResource.txt  is shown below. As we can see, it defines an ora.database.type resource, named ora.db11g.db. A lot of properties are related to this type of resource and do not need to be used for a cluster_resource. NAME=ora.db11g.db TYPE=ora.database.type ACL=owner:oracle:rwx,pgrp:oinstall:rwx,other::r-- ACTION_FAILURE_TEMPLATE= ACTION_SCRIPT= ACTIVE_PLACEMENT=1 AGENT_FILENAME=%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX% AUTO_START=restore CARDINALITY=1 CHECK_INTERVAL=1 CHECK_TIMEOUT=600 CLUSTER_DATABASE=false DB_UNIQUE_NAME=DB11G DEFAULT_TEMPLATE=PROPERTY(RESOURCE_CLASS=database) PROPERTY(DB_UNIQUE_NAME= CONCAT(PARSE(%NAME%, ., 2), %USR_ORA_DOMAIN%, .)) ELEMENT(INSTANCE_NAME= %GEN_USR_ORA_INST_NAME%) DEGREE=1 DESCRIPTION=Oracle Database resource ENABLED=1 FAILOVER_DELAY=0 FAILURE_INTERVAL=60 FAILURE_THRESHOLD=1 GEN_AUDIT_FILE_DEST=/oracle/admin/DB11G/adump GEN_USR_ORA_INST_NAME= GEN_USR_ORA_INST_NAME@SERVERNAME(oelcluster01)=DB11G HOSTING_MEMBERS= INSTANCE_FAILOVER=0 LOAD=1 LOGGING_LEVEL=1 MANAGEMENT_POLICY=AUTOMATIC NLS_LANG= NOT_RESTARTING_TEMPLATE= OFFLINE_CHECK_INTERVAL=0 ORACLE_HOME=/oracle/product/11.2.0/dbhome_1 PLACEMENT=restricted PROFILE_CHANGE_TEMPLATE= RESTART_ATTEMPTS=2 ROLE=PRIMARY SCRIPT_TIMEOUT=60 SERVER_POOLS=ora.DB11G SPFILE=+DTA/DB11G/spfileDB11G.ora START_DEPENDENCIES=hard(ora.DTA.dg,ora.FRA.dg) weak(type:ora.listener.type,uniform:ora.ons,uniform:ora.eons) pullup(ora.DTA.dg,ora.FRA.dg) START_TIMEOUT=600 STATE_CHANGE_TEMPLATE= STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DTA.dg,shutdown:ora.FRA.dg) STOP_TIMEOUT=600 UPTIME_THRESHOLD=1h USR_ORA_DB_NAME=DB11G USR_ORA_DOMAIN=haroland USR_ORA_ENV= USR_ORA_FLAGS= USR_ORA_INST_NAME=DB11G USR_ORA_OPEN_MODE=open USR_ORA_OPI=false USR_ORA_STOP_MODE=immediate VERSION=11.2.0.1.0 I removed database type related entries from myResource.txt and modified some other to produce the following myNewResource.txt. Notice the NAME property that should not have the ora. prefix Notice the TYPE property that is not ora.database.type but cluster_resource. Notice the definition of ACTION_SCRIPT. Notice the HOSTING_MEMBERS that enumerates the members of the cluster (as returned by the olsnodes command). NAME=DB11G.db TYPE=cluster_resource DESCRIPTION=Oracle Database resource ACL=owner:oracle:rwx,pgrp:oinstall:rwx,other::r-- ACTION_SCRIPT=/crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh PLACEMENT=restricted ACTIVE_PLACEMENT=0 AUTO_START=restore CARDINALITY=1 CHECK_INTERVAL=10 DEGREE=1 ENABLED=1 HOSTING_MEMBERS=oelcluster01 oelcluster02 LOGGING_LEVEL=1 RESTART_ATTEMPTS=1 START_DEPENDENCIES=hard(ora.DTA.dg,ora.FRA.dg) weak(type:ora.listener.type,uniform:ora.ons,uniform:ora.eons) pullup(ora.DTA.dg,ora.FRA.dg) START_TIMEOUT=600 STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DTA.dg,shutdown:ora.FRA.dg) STOP_TIMEOUT=600 UPTIME_THRESHOLD=1h Register the resource. Take care of the resource type. It needs to be a cluster_resource and not a ora.database.type resource (Oracle recommendation) .   crsctl add resource DB11G.db  -type cluster_resource -file /crs/11.2.0/HA_scripts/myNewResource.txt Step 3 - Start the resource crsctl start resource DB11G.db This command launches the ACTION_SCRIPT with a start and a check parameter on the primary node of the cluster. Step 4 - Test this We will test the setup using 2 methods. crsctl relocate resource DB11G.db This command calls the ACTION_SCRIPT  (on the two nodes)  to stop the database on the active node and start it on the other node. Once done, we can revert back to the original node, but, this time we can use a more “MS$ like” method :Turn off the server on which the database is running. After short delay, you should observe that the database is relocated on node 1. Conclusion Once the software installed and the standalone database created (which is a rather common and usual task), the steps to reach the objective are quite easy : Create an executable action script on every node of the cluster. Create a resource file. Create/Register the resource with OCR using the resource file. Start the resource. This solution is a very interesting alternative to licensable third party solutions.   References Clusterware 11gR2 documentation Oracle Clusterware Resource Reference   Gilles Haro Technical Expert - Core Technology, Oracle Consulting   

  Read the article

• Business Analytics Monthly Index - October 2013

  - by p.anda

  Starting from this post we are providing a monthly summary. This provides a quick look at what has been happening in our Proactive Support Blog over the last month. Welcome to the first Monthly Index posting! Please let us know what you think and your suggestions are most welcome ... Oracle Business Analytics - Blog Monthly Index - October 2013 General Summary   Link   Introducing the Business Analytics Proactive Support Team - Outlining the Proactive Support Team function View Business Intelligence (BI) Summary   Link   OBIEE version 11.1.1.7.131017 has been released - Links to the latest OBIEE release information & downloads View Update to OBIEE Chrome 30 issue - Information for patch release for OBIEE Chrome issue View OBIEE problems with Chrome (update 30) - Highlight OBIEE 11.1.1.7.1 issue with latest Google Chrome update 30 View OBIEE 11.1.1.7.1 Sample App (V309 R2) released - Link and Information about the current OBIEE Sample App View OBIEE - APEX integration - An article discussing the OBIEE APEX Integration View Enterprise Performance Management (EPM) Summary   Link   Hyperion Smartview Assistance - Information & resources for Hyperion Smartview inc. OBIEE integration View Java update alert: issue with EAS 11.1.2.3 - Advisory of recent Java release and identified EAS problem + workaround View EPM troubleshooting Utilities - Outlining additional resources for troubleshooting EPM View EPM Infrastructure Tuning Guide released - Link to the EPM Infrastructure Tuning Guide (v.11.1.2.2 / 11.1.2.3) View Essbase - FormatString - Discussing Essbase "Typed Measures" View October EPM patch set updates released - Links to the October Patches for EPM View featuring - the DRM blog - Featuring one of our co-blogs that is very beneficial View Advisor Webcast Summary   Link   Advisor Webcast: EPM 11.1.2.3 new features in Financial Applications - Announcement for AW: New Features in FA   (recording post presentation via Doc ID 1456233.1 | Archived 2013) View Advisor Webcast: Troubleshooting Discoverer editions - AW: Discussing Discover Logs/Tracing/EUL Status Workbooks & more.   (recording post presentation via Doc ID 1456233.1 | Archived 2013) View

  Read the article

• check what process was causing the problem of high cpu load

  - by linuxk

  I'm running nginx wordpress server in KVM using 12.04 server x86. It was running very well about 4 month until 2 hours ago. I found that my website is down and no ping response. Virt-manager logged high cpu load(plz see the picture below) before unexpected shut down. I want to know what process caused unexpected shutdown. The following log files make me think my server is attacked. Any suggestions and help would be appreciated. kern.log and syslog showed me same output. Nov 11 03:54:11 www kernel: [1344541.156239] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=0.0.0.0 DST=224.0. 0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Nov 11 03:54:11 www kernel: [1344541.156315] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=0101:080a:2334:c90 0:0100:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=ICMPv6 TYPE=130 CODE=0 /nginx/access.log showed me 119.235.237.17 - - [11/Nov/2012:03:45:29 +0900] "GET /blog HTTP/1.1" 200 30493 "-" "Yeti/1.0 (NHN Corp.; http://help.naver.com/robots/)" my-server-ip - - [11/Nov/2012:11:05:30 +0900] "POST /wp-cron.php?doing_wp_cron=13 HTTP/1.0" 499 0 "-" "WordPress/3.4.2; http://mywebsite.com" Server turned on in here. 119.235.237.16 - - [11/Nov/2012:11:05:30 +0900] "GET /blog HTTP/1.1" 200 32935 "-" "Yeti/1.0 (NHN Corp.; http://help.naver.com/robots/)"

  Read the article

• Hurry! See the uncensored OOW videos before they get edited!

  - by rickramsey

  source Uploaded so far: Which Oracle Solaris 11 Technologies Have Sysadmins Been Using Most? Director's Cut - Uncensored - Markus Flierl, VP Solaris Core Engineering, describes how Oracle Solaris 11 customers are taking advantage of the Image Packaging System and the snapshot capability of ZFS to run more frequent updates of not only the OS, but also the applications (agile development, anyone?), and how they're using the network virtualization capabilities in Oracle Solaris 11 to isolate applications and manage workloads on the cloud. Watch How Hybrid Columnar Compression Saves Storage Space Director's Cut - Uncensored - Art Licht shows how hyprid columnar compression (HCC) compresses data 30x without slowing down other queries that the database is performing. First he shows what happens when he runs database queries without HCC, then he shows what happens when he runs the queries with HCC. Security Capabilities and Design in Oracle Solaris 11 Director's Cut - Uncensored - Compliance reporting. Extended policy. Immutable zones. Three of the best minds in Oracle Solaris security explain what they are, what customers are doing with them, and how they were engineered. Filmed at Oracle Open World 2012. Why DTrace and Ksplice Have Made Oracle Linux 6 Popular with Sysadmins Use the DTrace scripts you wrote for Oracle Solaris on Oracle Linux without modification. Wim Coekaerts, VP of Engineering for Oracle Linux, explains how this capability of DTrace, the zero downtime updates enabled by KSplice, and other performance and stability enhancements have made Oracle Linux 6 popular with sysadmins. Why Solaris 11 Is Being Adopted Faster Than Solaris 10 Sneak Preview - Uncut Version - Lynn Rohrer, Director of Oracle Solaris Product Management explains why customers are adopting Oracle Solaris 11 at a faster rate than Oracle Solaris 10, and proves why you should never challenge a Montana woman to a test of strength. What Forsythe Corp Is Helping Its Customers Do With Oracle Solaris 11 Director's Cut - Unedited - Lee Diamante, Solutions Architect for Forsythe Corp, an Oracle Solaris Partner, explains why Forsythe has been recommending Oracle Solaris to its customers, and what those customers have been doing with it. Lots more to come ... - Rick Website Newsletter Facebook Twitter

  Read the article

• PRUEBAS DE ESPECIALIZACION 2013/2014

  - by agallego

  Consigue  tu Certificado de Especialista Oracle  de forma GRATUITA , 27 y 28 de Noviembre de 2013  Ahora puedes realizar los exámenes de implementación de las especializaciones de Oracle y convertirte en especialista. Podrás realizar cualquiera de los exámenes de implementación de la siguiente lista: Oracle Fusion Customer Relationship Management 11g Sales Certified Implementation Specialist (1Z0-456) Oracle Fusion Customer Relationship Management 11g Incentive Compensation Certified Implementation Specialist (1Z0-472) Oracle ATG Web Commerce 10 Implementation Developer Certified Implementation Specialist (1Z0-510) Oracle RightNow CX Cloud Service 2012 Certified Implementation Specialist (1Z0-465) Oracle RightNow CX Cloud Service 2012 Developer Certified Implementation Specialist (1Z0-480) Oracle Fusion Human Capital Management 11g Human Resources Certified Implementation Specialist (1Z0-584) Oracle Fusion Human Capital Management 11g Talent Management Certified Implementation Specialist (1Z0-585) Oracle Taleo Recruiting Cloud Service 2013 Certified Implementation Specialist  (1Z0-474) Oracle Fusion Financials 11g Accounts Payable Certified Implementation Specialist(1Z0-507) Oracle Fusion Financials 11g Accounts Receivable Certified Implementation Specialist(1Z0-506) Oracle Fusion Financials 11g General Ledger Certified Implementation Specialist (1Z0-508) Oracle Fusion Distributed Order Orchestration 11g Essentials (1Z0-469) Oracle Documaker Standard Edition 12 Implementation Essentials (1Z0-570) Oracle Hyperion Planning 11 Essentials (1Z0-533) Oracle Hyperion Financial Management 11 Essentials (1Z0-532) Oracle Business Intelligence Foundation Suite 11g Essentials (1Z0-591) Oracle Essbase 11 Essentials (1Z0-531) Oracle GoldenGate 10 Essentials (1Z0-539) Oracle GoldenGate 11g Certified Implementation Exam Essentials Oracle Business Intelligence Applications 7.9.6 for CRM Essentials (1Z0-524) Oracle Business Intelligence Applications 7.9.6 for ERP Essentials (1Z0-525) Oracle Oracle Endeca Information Discovery 2.3 Certified Implementation Specialist (1Z0-461) Oracle SOA Suite 11g Essentials (1Z0-478) Oracle Service-Oriented Architecture Certified Implementation Specialist (1Z0-451) Oracle Unified Business Process Management Suite 11g Certified Implementation Specialist (1Z0-560) Oracle WebLogic Server 12c Certified Implementation Specialist (1Z0-599) Oracle Application Grid Certified Implementation Specialist(1Z0-523) Oracle WebCenter Content 11g Essentials (1Z0-542) Oracle WebCenter Portal 11g Essentials (1Z0-541) Oracle Application Development Framework Essentials (1Z1-554) Oracle Identity Governance Suite 11g Essentials(1z0-459) Oracle Access Management Suite Plus 11g Essentials Exam(1z0-479) M2M Platform Certified Architecture Essentials (1Z0-467) Oracle WebCenter Sites 11g Certified Implementation Specialist (1Z0-462)  Oracle Cloud Application Foundation Essentials(1Z0-468) Oracle Exadata 11g Essentials (1Z0-536) Exadata Database Machine Models X3-2 and X3-8 Certified Implementation Specialist (1Z0-485) Oracle Certified Expert, Oracle Exadata X3 Administration(1Z0-027) Exalogic Elastic Cloud X2-2 Certified Implementation Specialist (1Z0-569) Oracle Linux System Administration (1Z0-403) Oracle Linux Fundamentals (1Z0-402) Oracle Linux 6 Certified Implementation Specialist (1Z0-460) Oracle VM 3 for x86 Certified Implementation Specialist (1Z0-590) Oracle Enterprise Manager 11g Essentials  (1Z0-530 ) Oracle Enterprise Manager 12c Essentials (1Z0-457) SPARC T4-Based Server Installation Essentials (1Z0-597) 1Z0-821 Oracle Solaris 11 System Administration 1Z0-822 Oracle Solaris 11 Advanced System Administration Oracle Solaris 11 Installation and Configuration Essentials (1Z0-580) StorageTek Tape Libraries Certified Implementation Specialist(1Z0-546) Sun ZFS Storage Appliance Certified Implementation Specialist The Primavera P6 Enterprise Project Portfolio Management 8 Essentials (1Z0-567) The Primavera Portfolio Management Essentials (1Z0-544) Primavera Contract Management 14 Certified Implementation Specialist (1Z0-582) Oracle Utilities Customer Care and Billing 2 Certified Implementation Specialist (1Z0-562) Oracle Policy Automation 10 Certified Implementation Specialist (1Z0-534) Oracle User Productivity Kit 11 Certified Implementation Specialist (1Z0-566) Oracle User Productivity Kit 11 Technical Certified Implementation Specialist (1Z0-583) Oracle Retail Demand Forecasting 13.3 Functional Implementer Certified Implementation Specialist (1Z0-463) Oracle Retail Predictive Application Server 13 Configuration Implementation Specialist (1Z0-576) Oracle Retail Merchandising System 13.2 Foundation Functional Implementer Certified Implementation Specialist (1Z0-453) Oracle Retail Predictive Application Server 13 Configuration Implementation Specialist (1Z0-576) Oracle Retail Point-of-Service Technical Certified Implementation Specialist (1Z0-572) Oracle Retail Price Management 13.2 Functional Implementer Certified Implementation Specialist (1Z0-454) Oracle Retail Predictive Application Server 13 Configuration Implementation Specialist (1Z0-576) Oracle Retail Store Inventory Management 13.2 Functional Implementer Certified Implementation Specialist (1Z0-455) Oracle Flexcube Universal Banking 11 Technical Implementation Essentials (1Z0-579) Oracle FlexCube Universal Banking 11 Basic Implementation Essentials (1Z0-561) Oracle Flexcube Universal Banking 11 Technical Implementation Essentials (1Z0-579) Oracle FLEXCUBE Direct Banking 6 Implementation Essentials (1Z0-594)   Puedes consultar la información acerca de los examenes en cada uno de los enlaces. Para prepararte los examenes sigue la Guia de estudio que encontrarás en la página de cada examen. Requisitos: ser  Partner Gold, Platinum o Diamond de Oracle y tener un usuario de Oracle Pearson Vue.  ¿Cuándo?: 27 y 28 de noviembre  a las (9:00, 12:00, 16:00)  ¿Dónde?: Core Networks, C.E.Parque Norte, Edificio Olmo, Planta 1 Serrano Galvache 56 | 28033, Madrid Para inscribirte: Create una cuenta en Pearson Vue (www.pearsonvue.com/oracle). Para Registrarte aquí. Para más información sobre el programa de especializaciones, haz clic aquí. No pierdas esta oportunidad e inscríbete hoy.  Para cualquier duda contactar con [email protected]. Ana María Gallego Partner Enablement Manager Spain and Portugal        

  Read the article

• Which programming language is manageable by an 11 year old kid?

  - by tangens

  Possible Duplicates: What is the easiest language to start with? What are some recommended programming resources for pre-teens? My son is 11 years old and he would like to learn a programming language. Of course his primary goal is to develop some (simple) games. Do you know of a programming language that is suitable for this situation? Summary of languages recommended in the answers Snake Wrangling for Kids (answer) Scratch (answer) Small Basic (answer) (answer) Logo NXT-G for Lego Mindstorms (answer) Alice (answer) BlueJ (answer) Squeak Smalltalk (answer) (answer) (answer) Blender Game Engine (answer) PyGame (answer) (answer) (answer) Inform (answer) Phrogram (answer) Dr Scheme (answer) eToys (answer) runrev (answer) Karel Programming (answer) Hackety Hack (answer) Visual Basic (answer) (answer) Learn to Program (answer) QBasic (answer) (answer) Visual Basic Express (answer) Processing (answer) C# (answer) JavaScript (answer) (answer) Ruby (answer) ToonTalk (answer) Flash and ActionScript (answer) StarLogo (answer) Java (answer) Kodu (answer) XNA (answer) (answer) unity3D (answer) BlitzBasic (answer)(answer) Lua (answer)

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >