Search Results

Search found 1584 results on 64 pages for 'punch cards'.

Page 45/64 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Effect of using dedicated NVidia card instead of Intel HD4000

  - by Sman789

  Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

  Read the article

• Wrong resolution for Lightdm/GDM on Ubuntu 13.04 using HDMI

  - by f03lipe

  I've tried all the solution I could find on the matter so far, but the error persists. My problem is that the login screen (both under gdm and lightdm) runs with the wrong resolution, even though all is fine when I log in. The error occurs solely when I have my HDMI cable connected to my other screen. The login screen resolution becomes 1024x768 (for my 1366x768 laptop screen) and mirrored on my screen, which is 1920x1080. I've had this issue on version 12.04 (the last one before I upgraded to 13.04), but I got it fixed by adding the xrandr commands on the begining of the /etc/gdm/Init/Default file. This doesn't seem to work anymore. I've also tried telling lightdm to run a script fixing the resolution with xrandr (by editing /etc/lightdm/lightdm.conf), but lightdm crashes, and I'm forced to log in with low graphic settigs. Hint: when ubuntu is loading, the resolution starts OK, then goes bad right before the login screen is initialized. Does that mean that there's nothing wrong with my graphic cards? What do you think? Cheers!

  Read the article

• How to debug lack of sound in Asus EEE PC

  - by Kalmar

  I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• Ubuntu sound volume is 40% lower than in Windows

  - by ncomx

  I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

  Read the article

• Why does Unity not extend to my 2nd monitor, even when it is displaying an X-Screen?

  - by Gridwalker

  I recently added a 2nd video card to my system, but unity refuses to extend my desktop over to the second screen. Although the secondary monitor initialises when I boot and I can move the mouse cursor over to the 2nd screen, the screen is otherwise blank (showing no wallpaper or interface elements) and I am unable to move any windows to this monitor. Moving the mouse cursor over to the 2nd monitor changes it from the default cursor to the old-style X cursor, such as the one that appears when you run X-kill, indicating that this screen is initialised in the X Server but that Unity is not recognising it. Although the Nvidia X Server Settings application can see both monitors, the unity systems settings application does not detect the 2nd adapter. Sometimes the additional drivers application can see both adapters, but it doesn't consistently show options for them both. Xrandr also fails to detect the 2nd monitor, but iNex lists both adapters. I have experimented with several different drivers for each adapter and with setting each of the graphics cards as the primary adapter in the BIOS, but this has made little difference. The two adapters are an onboard Geforce 8200 and a PCIE Geforce 7200 GX. The onboard adapter is currently set as the primary, however this adapter crashes whenever I use the Nouveau driver and I have to switch over to the PCIE as a primary whenever I purge the proprietary drivers (switching back when the 304 driver has been reinstalled). It doesn't matter which adapter I set as my primary, the results are the same : one screen showing the unity interface and one screen showing an X-Screen that only displays the mouse cursor. All I want is to be able to run this system in a dual screen configuration. I am not a gamer, nor do I require 3D rendering capabilities. Anything you can suggest to get the desktop to extend across both screens will be massively appreciated!

  Read the article

• 3D physics engine for accurate collision handling on desktop/laptop computers (non-console)

  - by Georges Oates Larsen

  What are your suggestions for a physics engine that satisfies the following criteria? Capable of calculating collisions between multiple concave mesh-based colliders Handles many collisions going on at once (for instance one mesh being wedged between two others, which themselves may be wedged between two meshes) Does not allow for collider passthrough, even at high speeds. For instance, if I am applying force to a programmatically hinged object that makes it spin, I do not want it to pass through another rigidbody that it collides with while spinning. I have this problem using PhysX As implied before, reacts well to hinged objects, preferably has its own implementation of a hinge, but I am willing to program my own. The important part is that it has some sort of interface that guarantees accurate collision tracking even when dealing with these things Platform independent -- runs on mac as well as PC, also not tied down to specific graphics cards I think that's the best way to explain what I am looking for. Basically, I need SUPER reliable collisions. Something that can't be accomplished with a simple ray casting approach that sends a ray from the last position of the object to the current position (as this object may be potentially large and colliding with small objects via rotation) Bonus points for also including an OPEN SOURCE engine.

  Read the article

• Is it possible to get xRandR to see two separate outputs with the nvidia driver?

  - by rumtscho

  I have two monitors, which I have set up with nvidia-settings in Twinview. The result: When I want to do something in xRandR, it does not function. It doesn't report one output per video card head, but a single output mapped to the combined area of both monitors: rumtscho@bradbury:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 3840 x 1440, current 3840 x 1440, maximum 3840 x 1440 default connected 3840x1440+0+0 0mm x 0mm 3840x1440 50.0* Now I promised somebody to help test a driver. The developer is using an open source driver for Intel video cards, and his driver assumes that there is more than one xRandR output, each mapped to a monitor. So I tried rewriting my xorg.conf to somehow get two outputs to show up, but failed. Googling showed that people faced with the xRandR-nvidia problem either stopped using xRandR and achieved what they needed with nvidia-settings, or changed their driver to nouveau. The first is not going to help in my situation, and I am not willing to give up the proprietary driver, because Compiz won't work without it. So does anybody know a way to get nvidia to actually pass on information on outputs to xRandR?

  Read the article

• Questions before I revamp my rendering engine to use shaders (GLSL)

  - by stephelton

  I've written a fairly robust rendering engine using OpenGL ES 1.1 (fixed-function.) I've been looking into revamping the engine to use OpenGL ES 2.0, which necessitates that I use shaders. I've been absorbing information all day long and still have some questions. Firstly, lighting. The fixed-function pipeline is guaranteed to have at least 8 lights available. My current engine finds lights that are "close" to the primitives being drawn and enables them; I don't know how many lights are going to be enabled until I draw a given model. Nothing is dynamically allocated in GLSL, so I have to define in a shader some number of lights to be used, right? So if I want to stick with 8, should I write my general purpose shader to have 8 lights and then use uniforms to tell it how many / which lights to use? Which brings me to another question: should I be concerned with the amount of data I'm allocating in a shader? Recent video cards have hundreds of "stream processors." If I've got a fragment shader being used on some number of fragments in a given triangle, I assume they must each have their own stack to work on. Are read-only variables copied here, or read when needed? My initial goal is to rework my code so that it is virtually identical to the current implementation. What I have in mind is to create my own matrix stack so that I can implement something along the lines of push/popMatrix and apply all my translations, rotations, and scales to this matrix, then provide the matrix to the vertex shader so that it can make very quick vertex translations. Is this approach sound? Edit: My original intention was to ask if there was a tutorial that would explain the bare minimum necessary to jump from fixed-function to using shaders. Thanks!

  Read the article

• 12.10 no audio via hdmi and video speeds up

  - by jackson

  I have a laptop with an ati radeon 4200, on 12.04 everything worked fine, since upgrading to 12.10 I cannot get sound over the hdmi. When I switch to hdmi audio the video speeds up to about 2x. I can use the speakers in my laptop and watch video via hdmi with no problems. Things I have tried: Various tutorials to install the AMD/ATI drivers, all of which resulted in low graphics mode. Checked that everything is properly set in alsamixer, the sound utility and - installed pavucontrol and checked everything in there. Verified the output from cat /proc/asound/cards looks normal When I initially upgraded there was a plethora of problems which I believe were due to the old proprietary driver still being used but not compatible, after a few hours trying to fix that I decided just to back up and do a fresh install which works great except for the above stated problem. Any help would be greatly appreciated!! Finally hopefully this hasn't already been answered, I have tried a few different searches on the boards and haven't come up with anything. $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0

  Read the article

• OpenJDK In The News: AMD and Oracle to Collaborate in the OpenJDK Community [..]

  - by $utils.escapeXML($entry.author)

  During the JavaOne™ 2012 Strategy Keynote, AMD (NYSE: AMD) announced its participation in OpenJDK™ Project “Sumatra” in collaboration with Oracle and other members of the OpenJDK community to help bring heterogeneous computing capabilities to Java™ for server and cloud environments. The OpenJDK Project “Sumatra” will explore how the Java Virtual Machine (JVM), as well as the Java language and APIs, might be enhanced to allow applications to take advantage of graphics processing unit (GPU) acceleration, either in discrete graphics cards or in high-performance graphics processor cores such as those found in AMD accelerated processing units (APUs).“Affirming our plans to contribute to the OpenJDK Project represents the next step towards bringing heterogeneous computing to millions of Java developers and can potentially lead to future developments of new hardware models, as well as server and cloud programming paradigms,” said Manju Hegde, corporate vice president, Heterogeneous Applications and Developer Solutions at AMD. “AMD has an established track record of collaboration with open-software development communities from OpenCL™ to the Heterogeneous System Architecture (HSA) Foundation, and with this initiative we will help further the development of graphics acceleration within the Java community.”“We expect our work with AMD and other OpenJDK participants in Project “Sumatra” will eventually help provide Java developers with the ability to quickly leverage GPU acceleration for better performance,” said Georges Saab, vice president, Software Development, Java Platform Group at Oracle. "We hope individuals and other organizations interested in this exciting development will follow AMD's lead by joining us in Project “Sumatra."Quotes taken from the first press release from AMD mentioning OpenJDK, titled "AMD and Oracle to Collaborate in the OpenJDK Community to Explore Heterogeneous Computing for Java ".

  Read the article

• Microsoft Changes Developer Account Registration Requirements

  - by Tim Murphy

  Over the last couple of weeks I have noticed that Microsoft seems to have changed the requirements for Corporate accounts.  These requirements were not in effect when I originally setup the account for the company that I work for.  We also recently had our corporate account canceled without explanation and are in the process of working to get it reinstated.  This all seems to revolve around rules to increase confidence that in the producers of content.  They are now having Symantec validate a company based on legal documents. In the past there have been problems with getting credit cards accepted.  We have had to setup new Live IDs to satisfy whatever glitch the system had or unexplainable requirement.  I am hoping that in the time that has elapsed these problems have been resolved. In truth I can’t say that these new requirements weren’t always in place, but it is getting frustrating to help clients setup accounts.  I am encourage that they have taken steps to safeguard the consumer from Joe-fly-by-night, but they also need to make sure that the process doesn’t become so complex that it drives away companies from participating in the store.  We will have to keep an eye on this as things evolve. del.icio.us Tags: Windows Phone Development,Windows 8 Development,Windows Phone,Windows 8,Registration,Corporate Accounts

  Read the article

• Dropping the full-time high-pay gig - I need help choosing a smart path that I can rely on to produce enough to survive comfortably ($2,500 per month)

  - by Jeff V

  I have about 6 years of full time experience developing web applications and tools. I know perl, python, PHP, ruby, and a good deal of SQL and relational theory. I have never had to choose a self-employed path as I have always had full time work or a bank account (credit cards) to support a big project. I'm planning to move out of the country to an area that will not offer local employment, and need some advice on what to focus on. I want to move in no more than six months, I have enough savings to live for an additional six months, but I would like to conserve it as much as possible. I enjoy taking risks, so I'm not looking for discussion of whether this is a good idea or not. I want advice on the most reliable solution given my skill set. Some paths I'm considering: Learn objective-c and build quality Apple software. Develop subscription based web tools for SEO, or other Marketing applications Attempt to acquire freelance projects by developing a reputation within open source projects, freelancer.com, and other online communities The last time I left my job, I was building a startup (that went under), and missed out living in a beautiful place due to the amount of time I worked. I would like to work 30-40 hours per week max. I can dedicate 10-15 hours per week while at my current job to prepare and learn. A preemptive thanks for the advice...

  Read the article

• How can I configure the embedded wireless card in a Toshiba Satellite Pro 4600 to work under Lubuntu 10.10?

  - by MoLE

  I'm struggling to get the embedded wireless card in this laptop to work. In 7.10 (gutsy) it worked fine. Now I'm trying to get 10.10 (maverick) working on it, and am using the Lubuntu flavour due to the low resources of this laptop. The hardware: Appears to be an embedded pcmcia card. pccardctl ident gives: Socket 0: product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) The default kernel recognises the card and loads the orinoco_cs driver. orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0001:0006:000e orinoco_cs 0.0: Firmware determined as Lucent/Agere 6.14 Then for some reason, the driver isn't happy with this and gives: orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0002:0009:0030 orinoco_cs 0.0: Firmware determined as Lucent/Agere 9.48 All seems ok until I try to associate with my access point using Network Manager. eth1: Lucent/Agere firmware doesn't support manual roaming repeated about 10 times then NM gives up. According to the linuxwireless.org wiki page on this driver, this is a known issue, and I quote: Known issues Roaming and WPA_supplicant Lucent/Agere firmware doesn't support manual roaming On the Agere cards, roaming is controlled by the firmware instead of userspace. You will get the above message if userspace attempts to associate with a specific AP rather than by SSID. If you are using wpa_supplicant use ap_scan=2 mode. NetworkManager uses wpa_supplicant, so the above also applies. At this point my google-fu has failed me, and I can't find how to configure network manager to use the mystical "ap_scan=2" mode via wpa_supplicant. I have tried the following suggested solutions (from launchpad or the forums) deleting the agere* files from /lib/firmware using wicd instead of network manager combining both blacklisting the orinoco_cs driver in an attempt to force use of the hostap_cs driver instead (in case it is a prism2 card). Obviously none of them have worked for me. Any hints on how to perform the suggested workaround above? Edit: I have also confirmed working on 8.10 (intrepid) live CD.

  Read the article

• Today in the OTN Lounge (Wednesday October 3, 2012)

  - by Bob Rhubart

  Here's a quick rundown of today's activities in the OTN Lounge: OTN Lounge hours today: 8:00 am - 6:00pm 9:00 am - 1:00 pm RAC Attack Learn about Oracle Real Application Clustering (RAC) in this collaborative event. You'll work with experts from the IOUG RAC SIG to get an Oracle Database 11gR2 RAC cluster running inside a virtual machine. For more information: RAC attack at Oracle Open World (Pythian Blog) RAC Attack - Oracle Cluster Database at Home/Events (WikiBooks) 4:30 pm - 8:00 pm Oracle Social Network Developer Challenge Judging The Oracle Social Network Developer Challenge comes to its conclusion with the final judging on entries and the award of the single prize: $500 in Amazon gift cards. Click here for more information. 4:30 pm - 5:30 pm Oracle ADF / Oracle Fusion Middleware Meet-up Join other Oracle ADF and Oracle Fusion Middleware developers and meet the product managers and engineers behind Oracle ADF, ADF Mobile, and ADF Essentials. Did we mention free beer? The OTN Lounge is located in the Howard St. Tent, between 3rd and 4th, directly between Moscone North and Moscone South. Access to the OTN Lounge requires an Oracle OpenWorld or JavaOne conference badge.

  Read the article

• I can't hear any sounds on ubuntu 11.10 on Dell inspiron N5010

  - by Ahmed

  I have a problem that I can't hear any sounds and I don't know where to start. I did the following : lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 0447 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at fbf00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel -- 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Dell Device 0447 Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at fbe40000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel And It seems that I have 2 soundcards. Is that normal ?? I also did this: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 Also on the sound setting GUI. I have 2 hardware profiles for sound cards but none of them works when I test the speakers. Where should I start searching ?

  Read the article

• Randomly Freezes - How Can I Diagnose the Problem?

  - by j0rd4n

  At random times, Ubuntu 10.04 freezes, and I have to do a hard shutdown. It was upgraded from 9.10 which didn't freeze. First, is this is common problem with a quick answer, and if not, what can I do to diagnose it? I've tried checking application/kernel logs, but nothing gives me a clue as to what caused the problem. My guess, is that since the OS froze, no logs could be updated. Ideas? SOLUTION: Solved it. My particular problem was my graphics card (integrated Radeon 9000 series). netconsole revealed I was getting the error: "reserve failed for wait". After trial-and-error, I manually configured my video card and disabled hardware acceleration. Completely fixed the issue. Here is what I did: Manually Created xorg.conf Ubuntu automatically configures xorg.conf and doesn't use a file. To edit this file, you have to tell Ubuntu to explicitly create one and then edit it. Here are the steps: Restart system Hold Shift as GRUB boots Select root terminal in GRUB login menu Execute: X -config xorg.conf.new Copy: cp xorg.conf.new /etc/X11/xorg.conf Disable Hardware Acceleration The following is specific to my Radeon card, but I'm sure other cards have a similar setup. Edit xorg.conf Find "Device" section for graphics card Uncomment "NoAccel" option and set to "True" Save + reboot Hope that helps.

  Read the article

• How to get Nvidia graphics working on Sony Z laptop?

  - by projectshave

  I have an older Sony VAIO Z 590 laptop with switchable graphics between Intel and Nvidia GeForce 9300M. It is NOT Optimus. I did a clean install of Ubuntu 12.04. Everything works, but it's using Unity 2D with the Intel drivers. I've tried loading the Nvidia drivers from "Additional Drivers", but it says "this driver is activated but not currently in use". When I run "nvidia-settings", an error window pops up to say "You do not appear to be using the NVIDIA X drivers." "lspci" shows both graphics cards. Let me know if I should add more info. How do I get the Nvidia graphics and Unity 3D working? More info: $ lshw -short -class display H/W path Device Class Description ============================================== /0/100/1/0 display G98 [GeForce 9300M GS] /0/100/2 display Mobile 4 Series Chipset Integrated Graphics C $ glxinfo name of display: :0 Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Excerpts from Xorg.0.log: [ 16.373] (II) LoadModule: "glx" [ 16.373] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 16.386] (II) Module glx: vendor="NVIDIA Corporation" [ 16.386] compiled for 4.0.2, module version = 1.0.0 [ 16.386] Module class: X.Org Server Extension [ 16.386] (II) NVIDIA GLX Module 295.49 Tue May 1 00:09:10 PDT 2012 [ 16.608] (II) NVIDIA dlloader X Driver 295.49 Mon Apr 30 23:48:24 PDT 2012 [ 16.608] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 17.693] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)

  Read the article

• How to disable discrete GPU using NVIDIA drivers?

  - by penzoiders

  I have a DELL studio XPS 13 (aka 1340) as of 12.04 most things run smoothly out of the box, but I have some power draining and warmness issues (if not to be called terrible heat issues) The system came with a NVIDIA GeForce 9500M (which has Hybrid SLI) and it shows up in "lspci" as these 2 cards 02:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 9200M GS] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation C79 [GeForce 9400M G] (rev b1) I had to install nvidia-current over noveau driver 'cause noveau does freeze the system after suspension. By installing nvidia-current and running nvidia-xconfig the resume process after suspension is fixed. By the way both with nvidia-current and noveau the system drains a lot of battery and heats up a lot. I suppose this is because the discrete GPU is always on. I don't really need 3D graphics on this system, if not the minimal to run unity and compiz for window management. So my question is: How do I disable, using nvidia-current, the discrete GPU 9200M and use only the integrated one 9400M? notes: In BIOS I have no option to disable discrete GPU This I think is not applicable because of the suspension-freeze issue (with noveau): https://help.ubuntu.com/community/HybridGraphics I've found this but I don't know which --sli option I should choose to fit my needs: http://manpages.ubuntu.com/manpages/hardy/man1/nvidia-xconfig.1.html My system has not optimus or cuda, but anyone can tell me if bumblebee can work for me?

  Read the article

• How can I have sound output before logging in?

  - by ??O?????

  I have a machine (Ubuntu 11.10) that I would like to have it play audio (typically through an amplifier), but the machine should be headless (where its final placement will be). I will control what is played through ssh. However, there is no sound output until I login to the graphical console. At first I thought it was an issue with pulseaudio, so I promptly removed it to use the default ALSA, but I have the same issues. I ssh to the machine, I run alsamixer and get the typical cannot open mixer: No such file or directory error (while /proc/asound/cards display correctly what I have). If I login on the graphical console, alsamixer works fine in the ssh session, and I have sound output. I logout, and then alsamixer stops working. So something runs (Xsession perhaps?) when I login that enables sound output, and gets disabled when I logout. I remember in older versions of Ubuntu, there was a drum roll when the machine showed the login screen; that is not the case anymore. Perhaps if I somehow can enable that drum roll, I'll have fixed my problem too. In any case, the question I ask is what the title says.

  Read the article

• Never Bet Against the Impossible

  - by BuckWoody

  My uncle used to say “If a man tells you that his car squirts milk in his eye when you lift the hood, don’t bet against that. You’ll end up with milk in your eye.” My friend Allen White tells me this is taken from a play (and was said about playing cards), but I think the sentiment holds, even in database work. I mentioned the other day that you should allow the other person to talk and actively listen before you propose a solution. Well, I saw a consultant “bet against the impossible”  the other day – and it bit her. She explained to the person telling her the problem that the situation simply couldn’t exist that way, and he proceeded to show her that it did. She got silent, typed a few things, muttered a little, and then said “well, must be something else.” She just couldn’t admit she was wrong. So don’t go there. If someone explains a problem to you with their database, listen with purpose, and then explore the troubleshooting steps you know to find the problem. But keep your absolutes to yourself. In fact, I have a friend that has recently sent me one of those. He connects to a system with SQL Server Management Studio (SSMS) version 2008 (if I recall correctly) and it shows a certain version number of the target system in the connection tab. Then he connects to it using SSMS 2008 R2 and gets a different number. Now, as far as I know, we didn’t change the connection string information, and that’s provided by the target system, so this is impossible. But I won’t tell him that. Not until I look a little more. :) Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• JavaOne 2012 in Review

  - by Janice J. Heiss

  Noted freelance writer Steve Meloan has a new article up on otn/java, titled, “JavaOne 2012 Review: Make the Future Java” in which he summarizes the happenings at JavaOne 2012. Along the way, he reminds us that if the future turns out to be anything like the past, Java will do fine: The repeated theme for this year's conference was ‘Make the Future Java,’ and according to recent stats, the groundwork is already firmly in place:    There are 9 million Java developers worldwide.    Three billion devices run Java.    Five billion Java Cards are in use.    One hundred percent of Blu-ray Disc players ship with Java.    Ninety-seven percent of enterprise desktops run Java.    Eighty-nine percent of PC desktops run Java.This year's content curriculum program was organized under seven technical tracks:    Core Java Platform    Development Tools and Techniques    Emerging Languages on the JVM    Enterprise Service Architectures and the Cloud    Java EE Web Profile and Platform Technologies    Java ME, Java Card, Embedded, and Devices    JavaFX and Rich User Experiences”Meloan artfully reminds us of how JavaOne makes learning fun. Have a look at the article here.

  Read the article

• How do I find the correct Modeline to connect my computer to my Televsion

  - by Mikelane

  I've been trying to hook up a Ubuntu computer with my Panasonic TH-42PA60A Plasma television for weeks now. My original question was asked here, which includes all the specifications about the Television in detail and how I've connected the computer to the televsion. So far, I've tried hooking up three other computers; 2 Ubuntu computers with fairly new graphic cards, and a Windows XP computer. None of them have been able to display an image on the television. The closest I've come to getting a picture up is with my small laptop running Ubuntu, however the image came out all purple and distorted. I had gotten the image by adding extra modes via the xrandr command, using a process similar to described here. I realize it might be possible to get this working if I had the correct modeline. I've checked the Modeline database, but the Panasonic TH-42PA60A is not listed. How can I find the correct modeline for my television. What commands can I use? I've read that there may be a danger of damaging my TV when doing things like this. What things should I avoid to prevent damaging my television?

  Read the article

• How to fix Sketchup in Wine when tool starts, but displays empty workspace?

  - by Chaos_99

  I've installed wine 1.6 and winetricks in an Linux Mint 15 system, then downloaded the latest Sketchup2013 'Make' Windows-Installer and installed through wine. I've prepared the wine environment with starting as WINEARCH=win32, installed corefonts and ie8 and enabled the override for the 'riched20' libraries. (I've no idea what the last bit does, but it was advised in some guides.) I've also tried without these steps. Only the win32 seems to make a difference, as the installer will complain about not finding SP2 otherwise. Sketchup is installed successfully and starts, but displays an empty viewport. The program is responsive and everything works, it's just that you can't see anything. I don't get any OpenGL error and the registry entries seem fine, according to the OpenGL issue workarounds floating around the net. I still think it has something to do with OpenGL not working properly, maybe not in the wine environment, but in the linux system? I'm running on a Lenovo W520 with Nvida/Intel hybrid cards, but only the NVida card is active and the properitary nvidia (319) drivers are installed. GLXGears runs fine, but clamps at 2x the refresh rate. glxinfo outputs direct rendering: Yes server glx vendor string: NVIDIA Corporation server glx version string: 1.4 I'm willing to try any linux or wine OpenGL tests to narrow down the problem, if you can offer any advise on what to use.

  Read the article

• Has the emerging generation of programmers got the wrong idea about design patterns? [closed]

  - by MattDavey

  Over the years I've noticed a shift in attitude towards design patterns, particularly amongst the emerging generation of developers. There seems to be a notion these days that design patterns are silver bullets that instantly cure any problem, a proliferating idea that advancing as a software engineer simply means learning and applying more and more patterns. When confronted with a problem, developers no longer strive to truly understand the issue and design a solution - instead they simply pick a design pattern which seems to be a close fit, and try to brute-force it. You can see evidence of this by the many, many questions on Stack Overflow that begin with the phrase "what pattern should I use to...". I fall into a slightly more mature category of developers (5-10 years experience) and I have a very different viewpoint on patterns - simply as a communication tool to enhance clarity. I find this perspective of design patterns being lego bricks (collected like pokemon cards) a little disconcerting. Will developers lose this attitude as they gain more experience in software engineering? Or could these notions perhaps steer the direction of our craft in years to come? Did the older generation of developers have any similar concerns about us? (perhaps about OO design or similar...). if so, how did we turn out?

  Read the article

• Will Ubuntu work out on my mother's computer?

  - by PleaseStand

  My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. Recently, a relative brought up a newer computer; it ran Windows XP. Unfortunately, the hard drive failed soon afterward, forcing me to reinstall the operating system. Not having the original Windows disc or product key led me to consider Ubuntu Linux. Will it work for mom? Is the hardware compatible? (Check the history of this question for the full specifications.) Would Ubuntu/Xubuntu suffice, or would I be better off buying a new copy of Windows? Is her card game (Hoyle Card Games 3) likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, is running Windows 98 on VirtualBox an option on such an old computer? Are there any equally good card games for Linux? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? Is it possible to use a serial mouse?

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >