Search Results

Search found 1584 results on 64 pages for 'punch cards'.

Page 50/64 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

  • HighPoint RocketRAID 62x Controller

    - by TeXnewbie
    I have the subject card recently installed in Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-31-generic x86_64). See partial lspci -vv listing below (complete listing played havoc with pre tags): 03:00.0 RAID bus controller: HighPoint Technologies, Inc. Device 0622 (rev 01) Subsystem: HighPoint Technologies, Inc. Device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 9c00 [size=8] Region 1: I/O ports at 9800 [size=4] Region 2: I/O ports at 9400 [size=8] Region 3: I/O ports at 9000 [size=4] Region 4: I/O ports at 8c00 [size=16] Region 5: Memory at fdbff000 (32-bit, non-prefetchable) [size=2K] Expansion ROM at fdbe0000 [disabled] [size=64K] Capabilities: I followed instructions I found at https://help.ubuntu.com/community/RocketRaid to compile the drivers for it, and although performing the process described there seemed to work fine with no noticeable errors, when I rebooted after performing that procedure I could not boot. During dkms steps, I noticed messages indicating that (If next boot fails, revert to initrd.img-3.2.0-31-generic.old-dkms image) update-initramfs................ so I booted using a Ubuntu 12.10 LiveDVD and reverted to the old-dkms initrd.img as suggested above, but this failed to repair the boot problem. Ultimately, I used https://help.ubuntu.com/community/Boot-Repair in Ubuntu-Secure-Remix to fix the boot problem and was able to boot normally again, but now with the newly generated initrd.img in place again (which now boots normally), when I modprobe the rr62x kernel module, I immediately get a hard crash with messages to console about a kernel paging request that seems to have caused the problem. I've tried on multiple occasions now to use the newly built kernel module so as to allow me to use an eSATA port multiplier plugged into the card, but to no avail. Any suggestions on fixes or workarounds (I've read that some of the HighPoint cards (2720SGL) seem to work as a host bus adapter and thus may not need a custom driver, but that seems not to be the case for mine) would be most appreciated. My goal is to use the card as described here and with software RAID mdadm utilities. If necessary, I can hand-copy the console messages after the hard crash into a follow-up message, but I obviously can't do a cut/paste. I'll gladly provide any other details that are needed, but not sure what those would be at this point, so I'll refrain from adding other details for now. Thanks in advance for any help.

    Read the article

  • Stop Saying "Multi-Channel!"

    - by David Dorf
    I keep hearing the term "multi-channel" in our industry, but its time to move on. It kinda reminds me of the term "ECR" or electronic cash register. Long ago ECR was a leading-edge term, but nowadays its rarely used because its table-stakes. After all, what cash register today isn't electronic? The same logic applies to multi-channel, at least when we're talking about tier-1 and tier-2 retailers. If you're still talking about multi-channel retailing, you're in big trouble. Some have switched over to the term "cross-channel," and that's a step in the right direction but still falls short. Its kinda like saying, "I upgraded my ECR to accept debit cards!" Yawn. Who hasn't? Today's retailers need to focus on omni-channel, which I first heard from my friends over at RSR but was originally coined at IDC. First retailers added e-commerce to their store and catalog channels yielding multi-channel retailing. Consumers could use the channel that worked best for them. Then some consumers wanted to combine channels with features like buy-on-the-Web, pickup-in-the-store. Thus began the cross-channel initiatives to breakdown the silos and enable the channels to communicate with each other. But the multi-channel architecture is full of duplication that thwarts efforts of providing a consistent experience. Each has its own cart, its own pricing, and often its own CRM. This was an outcrop of trying to bring the independent channels to market quickly. Rather than reusing and rebuilding existing components to meet the new demands, silos were created that continue to exist today. Today's consumers want omni-channel retailing. They want to interact with brands in a consistent manner that is channel transparent, yet optimized for that particular interaction. The diagram below, from the soon-to-be-released NRF Mobile Blueprint v2, shows this progression. For retailers to provide an omni-channel experience, there needs to be one logical representation of products, prices, promotions, and customers across all channels. The only thing that varies is the presentation of the content based on the delivery mechanism (e.g. shelf labels, mobile phone, web site, print, etc.) and often these mechanisms can be combined in various ways. I'm looking forward to the day in which I can use my phone to scan QR-codes in a catalog to create a shopping cart of items. Then do some further research on the retailer's Web site and be told about related items that might interest me. Be able to easily solicit opinions and reviews from social sites, and finally enter the store to pickup my items, knowing that any applicable coupons have been applied. In this scenario, I the consumer are dealing with a single brand that is aware of me and my needs throughout the entire transaction. Nirvana.

    Read the article

  • Introducing Oracle Retail Mobile Point-of-Service

    - by user801960
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle recently announced the introduction of Oracle Retail Mobile Point-of-Service, a mobile extension to the Oracle Retail Point-of-Service (POS) used by many retailers internationally. Oracle Retail Mobile POS offers wide ranging cost and efficiency benefits by allowing staff resource to be used more effectively whilst also reducing spend associated with fixed POS solutions. For retailers utilising Oracle Retail Stores Solutions, additional benefits can be realised. Oracle Retail Mobile POS works with these solutions to allow store personnel to check in-store inventory, access product information and specifications, and perform tasks such as the printing or emailing of receipts and the activation of gift cards.  As Oracle Retail Mobile POS is an extension of Oracle Retail Point-of-Service, retailers can benefit from seamless integration with existing systems, simple upgrade procedures and seamless delivery across the business. However, the solution’s scalable and flexible architecture also supports multiple mobile operators and systems, so retailers are not locked into particular vendors. As well as being popular with retailers, Mobile POS has also proved to be well liked by consumers as it facilitates improved customer service levels. Retail staff are able to spend more time with consumers on the shop floor, access requested inventory information, and perform tasks that would traditionally have needed to be completed at a fixed cash register. Additional information can be accessed on Oracle Retail Point-of-Service or read the press announcement Oracle Introduces Mobile Point-of-Service for Retailers. Normal 0 false false false EN-US X-NONE X-NONE

    Read the article

  • Card deck and sparse matrix interview questions

    - by MrDatabase
    I just had a technical phone screen w/ a start-up. Here's the technical questions I was asked ... and my answers. What do think of these answers? Feel free to post better answers :-) Question 1: how would you represent a standard 52 card deck in (basically any language)? How would you shuffle the deck? Answer: use an array containing a "Card" struct or class. Each instance of card has some unique identifier... either it's position in the array or a unique integer member variable in the range [0, 51]. Shuffle the cards by traversing the array once from index zero to index 51. Randomly swap ith card with "another card" (I didn't remember how this shuffle algorithm works exactly). Watch out for using the same probability for each card... that's a gotcha in this algorithm. I mentioned the algorithm is from Programming Pearls. Question 2: how to represent a large sparse matrix? the matrix can be very large... like 1000x1000... but only a relatively small number (~20) of the entries are non-zero. Answer: condense the array into a list of the non-zero entries. for a given entry (i,j) in the array... "map" (i,j) to a single integer k... then use k as a key into a dictionary or hashtable. For the 1000x1000 sparse array map (i,j) to k using something like f(i, j) = i + j * 1001. 1001 is just one plus the maximum of all i and j. I didn't recall exactly how this mapping worked... but the interviewer got the idea (I think). Are these good answers? I'm wondering because after I finished the second question the interviewer said the dreaded "well that's all the questions I have for now." Cheers!

    Read the article

  • Getting WLAN on my Laptop to work (Medion MD98300)

    - by Anand Böhmer
    Dear Ubuntu Community, I am having difficulties to get the WLAN Adapter on my Medion 98300 Laptop to work. The WLAN Card seems to be connected through an internal USB Interface and the Card itself had shown up as a wirelles Network while installing Ubuntu. I have tried a few things earlier, but none of my google reasearches have brought me to a working solution... I am quite new to the Linux System and only knoew a couple of terminal commands so far, so I probably have missed out on a few possible solutions. Maybe you can help me? Thank you very much in advance! A fre minimal technical Details: AMD Turion 64 X2 Dual-Core Mobile Technolgie TL-50 NVIDIA GeForce Go 6150 SanDisk 64GB SSD 2GB RAM DDR2 667 nForce Chipset (I forgt the Version, but deductable from the GPU I guess) WiFi: ZyDAS ZD1211B 802.11g Thank's a lot again! :) UPDATE: I tried around myself a little and found a guide on the Linux Mint forums that helped! I already had tried to install the linux backport modules etc. What I finally did was update the linux firmware and run the following command: echo "options acer_wmi wirelles=1" sudo tee /etc/modprobe.d/acer_wmi.conf and rebooted now I found and could connect to networks, but unfortunately I found, that the link quality was very bad, around 40 to 50. Eventhough my Router is running at high power and is only 6 Meters away! I then switched a few channels, but that did not improve much. Before, under Windows, I had a very good link quality and had the entire 16mbit/s internet connection at disposal, now I can only get about 3-5Mbit/s. better then nothing, but still pretty bad! The "TX power" is fixed on 20dBm and iwconfig says, that the "Power Management" is off... Maybe the power of the module is set too low?... UPDATE2: I figured that 20dBm is a normal power output. I even tried to change the power using iwconfig wlan0 txpower INTEGERHERE but, obviously my "Card" does not support more then 20. More would probably be illegal as well, so I won't even use more then 20. I guess that I will have to figure out a way, or maybe just switch cards. Are the Mailboard-USB-Connectors on a laptop of the same property as the standard external ones? If so, I could simply solder a micro Wirelless N Adapter onto the board :)

    Read the article

  • GPU hung when switching graphic card

    - by Lie Ryan
    I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

    Read the article

  • My Graduate Experience at Oracle by Mayuri Khinvasara

    - by david.talamelli
    My experience at Oracle. I still vividly remember the day, when my name was announced in the campus hiring list of Oracle at my college. I was proud of myself but at the same time, I was getting goose bumps!!! A new world had arrived before me and the anxiousness of whether I could survive it or not had gripped me. Nervous about moving into an unknown city, I came to visit Hyderabad with my father. One look at the Oracle Campus and I felt some kind of magnetism pulling me towards it. And then, I joined Oracle in June 2009, with a lot of apprehensions in my mind. The HR Rep made us really comfortable in the first week itself. I met so many new people, managers, HR folks and most importantly 20 other Campus Hires like me. Then we had our team bonding sessions, team parties etc. I didn’t realize when the transition from campus to corporate happened. And I had started loving it. The confidence the HR Reps gave us and the bonding our managers imbibed in us, made us all ready for the new life ahead. Then started the rigorous training sessions, the excitement about our new work, new cubicles, new desktops, our first business cards, our first conference call and so on. I made new friends which were now my extended family, the freedom and courage of living alone. I was enjoying all that. As I was getting totally immersed into my regular work schedule I started getting to know the innumerable Oracle products, their functionalities, implementations and realizing the brand that Oracle is. Work pressure started increasing and so did the challenges to understand and deliver. I Didn’t realize how days and soon months passed by. Then came a golden chance to visit the Oracle Headquarters in US for 45 days training in November 2009. Once again, the excitement was enormous about the counter team-mates in HQ, the trainings ahead, the US work culture and my stay there. I felt so privileged for the company I was working. Boarding an international flight for the first time and visiting famous US cities which I had just seen in movies, was now a reality. It was a totally amazing experience. Work pressure kept me really busy, with learning new things every day, the immense satisfaction of delivering something, the nightmares of debugging a mistake, only to realize how silly it was.  I was enjoying the process. Soon a year passed by. I had transformed into this corporate software professional, I couldn’t believe I could be. Today, I complete 1 year and 8 months at Oracle and continue to look forward to the enriching experience I will have here. Truly one of the Top Companies in the World. Mayuri Khinvasara

    Read the article

  • Two interfaces with identical signatures

    - by corsiKa
    I am attempting to model a card game where cards have two important sets of features: The first is an effect. These are the changes to the game state that happen when you play the card. The interface for effect is as follows: boolean isPlayable(Player p, GameState gs); void play(Player p, GameState gs); And you could consider the card to be playable if and only if you can meet its cost and all its effects are playable. Like so: // in Card class boolean isPlayable(Player p, GameState gs) { if(p.resource < this.cost) return false; for(Effect e : this.effects) { if(!e.isPlayable(p,gs)) return false; } return true; } Okay, so far, pretty simple. The other set of features on the card are abilities. These abilities are changes to the game state that you can activate at-will. When coming up with the interface for these, I realized they needed a method for determining whether they can be activated or not, and a method for implementing the activation. It ends up being boolean isActivatable(Player p, GameState gs); void activate(Player p, GameState gs); And I realize that with the exception of calling it "activate" instead of "play", Ability and Effect have the exact same signature. Is it a bad thing to have multiple interfaces with an identical signature? Should I simply use one, and have two sets of the same interface? As so: Set<Effect> effects; Set<Effect> abilities; If so, what refactoring steps should I take down the road if they become non-identical (as more features are released), particularly if they're divergent (i.e. they both gain something the other shouldn't, as opposed to only one gaining and the other being a complete subset)? I'm particularly concerned that combining them will be non-sustainable as soon as something changes. The fine print: I recognize this question is spawned by game development, but I feel it's the sort of problem that could just as easily creep up in non-game development, particularly when trying to accommodate the business models of multiple clients in one application as happens with just about every project I've ever done with more than one business influence... Also, the snippets used are Java snippets, but this could just as easily apply to a multitude of object oriented languages.

    Read the article

  • Calling home, receiving calls and smartphone data from the US

    - by Rob Farley
    I got asked about calling home from the US, by someone going to the PASS Summit. I found myself thinking “there should be a blog post about this”... The easiest way to phone home is Skype - no question. Use WiFi, and if you’re calling someone who has Skype on their phone at the other end, it’s free. Even if they don’t, it’s still pretty good price-wise. The PASS Summit conference centre has good WiFI, as do the hotels, and plenty of other places (like Starbucks). But if you’re used to having data all the time, particularly when you’re walking from one place to another, then you’ll want a sim card. This also lets you receive calls more easily, not just solving your data problem. You’ll need to make sure your phone isn’t locked to your local network – get that sorted before you leave. It’s no trouble to drop by a T-mobile or AT&T store and getting a prepaid sim. You can’t get one from the airport, but if the PASS Summit is your first stop, there’s a T-mobile store on 6th in Seattle between Pine & Pike, so you can see it from the Sheraton hotel if that’s where you’re staying. AT&T isn’t far away either. But – there’s an extra step that you should be aware of. If you talk to one of these US telcos, you’ll probably (hopefully I’m wrong, but this is how it was for me recently) be told that their prepaid sims don’t work in smartphones. And they’re right – the APN gets detected and stops the data from working. But luckily, Apple (and others) have provided information about how to change the APN, which has been used by a company based in New Zealand to let you get your phone working. Basically, you send your phone browser to http://unlockit.co.nz and follow the prompts. But do this from a WiFi place somewhere, because you won’t have data access until after you’ve sorted this out... Oh, and if you get a prepaid sim with “unlimited data”, you will still need to get a Data Feature for it. And just for the record – this is WAY easier if you’re going to the UK. I dropped into a T-mobile shop there, and bought a prepaid sim card for five quid, which gave me 250MB data and some (but not much) call credit. In Australia it’s even easier, because you can buy data-enabled sim cards that work in smartphones from the airport when you arrive. I think having access to data really helps you feel at home in a different place. It means you can pull up maps, see what your friends are doing, and more. Hopefully this post helps, but feel free to post comments with extra information if you have it. @rob_farley

    Read the article

  • As the current draft stands, what is the most significant change the "National Strategy for Trusted Identities in Cyberspace" will provoke?

    - by mfg
    A current draft of the "National Strategy for Trusted Identities in Cyberspace" has been posted by the Department of Homeland Security. This question is not asking about privacy or constitutionality, but about how this act will impact developers' business models and development strategies. When the post was made I was reminded of Jeff's November blog post regarding an internet driver's license. Whether that is a perfect model or not, both approaches are attempting to handle a shared problem (of both developers and end users): How do we establish an online identity? The question I ask here is, with respect to the various burdens that would be imposed on developers and users, what are some of the major, foreseeable implementation issues that will arise from the current U.S. Government's proposed solution? For a quick primer on the setup, jump to page 12 for infrastructure components, here are two stand-outs: An Identity Provider (IDP) is responsible for the processes associated with enrolling a subject, and establishing and maintaining the digital identity associated with an individual or NPE. These processes include identity vetting and proofing, as well as revocation, suspension, and recovery of the digital identity. The IDP is responsible for issuing a credential, the information object or device used during a transaction to provide evidence of the subject’s identity; it may also provide linkage to authority, roles, rights, privileges, and other attributes. The credential can be stored on an identity medium, which is a device or object (physical or virtual) used for storing one or more credentials, claims, or attributes related to a subject. Identity media are widely available in many formats, such as smart cards, security chips embedded in PCs, cell phones, software based certificates, and USB devices. Selection of the appropriate credential is implementation specific and dependent on the risk tolerance of the participating entities. Here are the first considered actionable components of the draft: Action 1: Designate a Federal Agency to Lead the Public/Private Sector Efforts Associated with Achieving the Goals of the Strategy Action 2: Develop a Shared, Comprehensive Public/Private Sector Implementation Plan Action 3:Accelerate the Expansion of Federal Services, Pilots, and Policies that Align with the Identity Ecosystem Action 4:Work Among the Public/Private Sectors to Implement Enhanced Privacy Protections Action 5:Coordinate the Development and Refinement of Risk Models and Interoperability Standards Action 6: Address the Liability Concerns of Service Providers and Individuals Action 7: Perform Outreach and Awareness Across all Stakeholders Action 8: Continue Collaborating in International Efforts Action 9: Identify Other Means to Drive Adoption of the Identity Ecosystem across the Nation

    Read the article

  • How to Remove Extensions From, and Force the Trailing Slash at the End of URLs?

    - by Kronbernkzion
    Example of current file structure: example.com/foo.php example.com/bar.html example.com/directory/ example.com/directory/foo.php example.com/directory/bar.html example.com/cgi-bin/directory/foo.cgi I would like to remove HTML, PHP and CGI extensions from, and then force the trailing slash at the end of URLs. So, it could look like this: example.com/foo/ example.com/bar/ example.com/directory/ example.com/directory/foo/ example.com/directory/bar/ example.com/cgi-bin/directory/foo/ I am very frustrated because I've searched for 17 hours straight for solution and visited more than a few hundred pages on various blogs and forums. I'm not joking. So I think I've done my research. Here is the code that sits in my .htaccess file right now: RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME}\.html -f RewriteRule ^(([^/]+/)*[^./]+)/$ $1.html RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !(\.[a-zA-Z0-9]|/)$ RewriteRule (.*)$ /$1/ [R=301,L] As you can see, this code only removes .html (and I'm not very happy with it because I think it could be done a lot simpler). I can remove the extension from PHP files when I rename them to .html through .htaccess, but that's not what I want. I want to remove it straight. This is the first thing I don't know how to do. The second thing is actually very annoying. My .htaccess file with code above, adds .html/ to every string entered after example.com/directory/foo/. So if I enter example.com/directory/foo/bar (obviously /bar doesn't exist since foo is a file), instead of just displaying message that page is not found, it converts it to example.com/directory/foo/bar.html/, then searches for a file for a few seconds and then displays the not found message. This, of course, is bad behavior. So, once again, I need the code in .htaccess to do the following things: Remove .html extension Remove .php extension Remove .cgi extension Force the trailing slash at the end of URLs Requests should behave correctly (no adding trailing slashes or extensions to strings if file or directory doesn't exist on server) Code should be as simple as possible I would very much appreciate any help. And to first person that gives me the solution, I'll send two $50 iTunes Store gift cards for US store. If this offends anyone, I am truly sorry and I apologize. Thanks in advance.

    Read the article

  • Setting up Ubuntu on my mother's computer

    - by idealmachine
    Intended use My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. The name of her card game is Hoyle Card Games 3. Although I had to repair it several times over the last 10 years, it worked fine until it finally died at the end of last year. Hardware specifications A relative brought up a newer computer soon afterward: Operating system: Windows XP Asus K8N motherboard (with broken on-board sound; getting a sound card) Athlon 64? processor (don't remember the clock speed) 512 MB RAM Hope the graphics card works... Replacement sound card will be one of: Ensoniq ES1370 AudioPCI Diamond Monster Sound MX300 (Aureal chipset) Sound Blaster Audigy 2 SE Peripherals HP Scanjet 3400c scanner (USB connected) HP LaserJet multi-function printer (parallel port connected, and printing works with a PCL driver) Same serial mouse as old computer Question I had set up an SSH/VNC connection to allow for remotely working out problems. Or so I thought. A month later, the computer would not boot, rendering the SSH connection useless and an OS reinstall necessary. Unfortunately, I have neither the original Windows disc nor the product key. Unless I were to pay $200 for a full Windows 7 Home Premium license for my computer, I would not be able to re-install Windows XP on hers. I consider myself an advanced Linux user, having used Debian for years. So here are my questions. I have only one day to decide whether to use Ubuntu or buy Windows: A quick search leads me to believe all the hardware listed above is supposed to work with Linux, but am I mistaken? Would Ubuntu/Xubuntu suffice (specify which one if it matters), or would I be better off paying the $200 necessary for Windows XP? Is the card game likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, will VirtualBox run fast enough on such a computer (Windows 98 as the guest OS)? Are there any free card games just as good? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? The lack of it would be a big disadvantage. BONUS: Although I would probably replace the old mouse upon a move to Ubuntu, is it even possible to get a serial mouse working?

    Read the article

  • WebCenter Customer Spotlight: Sberbank of Russia

    - by me
    Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummarySberbank of Russia is the largest credit institution in Russia and the Commonwealth of Independent States (CIS), accounting for 27% of Russian banking assets and 26% of Russian banking capital.Sberbank of Russia needed to increase business efficiency and employee productivity due to the growth in its corporate clientele from 1.2 million to an estimated 1.6 million.Sberbank of Russia deployed Oracle’s Siebel Customer Relationship Management (CRM) applications to create a single client view, optimize client communication, improve efficiency, and automate distressed asset processing. Based on Oracle WebCenter Content, they implemented an enterprise content management system for documents, unstructured content storage and search, which became an indispensable service across the organization and in the board room business results. Sberbank of Russia consolidated borrower information across the entire organization into a single repository to obtain, for the first time, a single view on the bank’s borrowers. With the implemented solution they reducing the amount of bad debt significantly. Company OverviewSberbank of Russia is the largest credit institution in Russia and the Commonwealth of Independent States (CIS), accounting for 27% of Russian banking assets and 26% of Russian banking capital. In 2010, it ranked 43rd in the world for Tier 1 capital. Business ChallengesSberbank of Russia needed to increase business efficiency and employee productivity due to the growth in its corporate clientele from 1.2 million to an estimated 1.6 million. It also wanted to automate distressed asset management to reduce the number of corporate clients’ bad debts. As part of their business strategy they wanted to drive high-quality, competitive customer services by simplifying client communication processes and enabling personnel to quickly access client information Solution deployedSberbank of Russia deployed Oracle’s Siebel Customer Relationship Management (CRM) applications to create a single client view, optimize client communication, improve efficiency, and automate distressed asset processing. Based on Oracle WebCenter Content, they implemented an enterprise content management system for documents, unstructured content storage and search which became an indispensable service across the organization and in the board room business results. Business ResultsSberbank of Russia consolidated borrower information across the entire organization into a single repository to obtain, for the first time, a single view on the bank’s borrowers. They monitored 103,000 client transactions and 32,000 bank cards with credit collection issues (100% of Sberbank’s bad borrowers) reducing the amount of bad debt significantly. “Innovation and client service are the foundation of our business strategy. Oracle’s Siebel CRM applications helped advance our objectives by enabling us to deliver faster, more personalized service while managing and tracking distressed assets.” A.B. Sokolov, Head of Center of Business Administration and Customer Relationship Management, Sberbank of Russia Additional Information Sberbank of Russia Customer Snapshot Oracle WebCenter Content Siebel Customer Relationship Management 8.1 Oracle Business Intelligence, Enterprise Edition 11g

    Read the article

  • NVIDIA Additional Drivers Empty - maximum resolution 640x480 - Driver disappears

    - by Hannibal
    EDIT: Optimus card. For resolution please read this thread: "You do not appear to be using the nvidia x server"(screenshot included) And this: Ubuntu 11.10 problem with Nvidia Thanks! I know, I know yet another NVIDIA question. So I did all the research. I uninstalled and installed nvidia-settings and drivers and nvidia-current from PPE repositories which are the most updated ones. I executed nvidia-xconfig. I have two major problems. One: Additional Drivers setting is empty! It doesn't contain any driver although one is installed. I have executed apt-get update too. But still the list is empty. Two: If I execute nvidia-xconfig it will properly configure an xorg.conf file. I restart but the maximum resolution I got is 640x480. I tried the xrandr but I can't add any resolution to display LVDS1. Some weird error occurs. So I can't add a proprietary driver and I can't boot in with the xorg file created by Nvidia... What can I do? With some work ( unistall nvidia-current and install libgl1-mesa-glx I was able to activate some kind of usage of my card because the resolution got better... and I added bumbelbee to because I have multiple video cards... ) but still the list is empty. I don't know what to do at this point??!!! Also: this is the most important part. When I first installed my ubuntu yesterday 11.10 one I saw the driver!! The driver was there... And then I ofc updated every package from internet.. And after that it was gone. And I can't bring it back. So there must be something wrong with one of the updates. But which???? Thanks for any extra info you can provide! I'm really desperate to solve this issue.

    Read the article

  • Help choosing authentication method

    - by Dima
    I need to choose an authentication method for an application installed and integrated in customers environment. There are two types of environments - windows and linux/unix. Application is user based, no web stuff, pure Java. The requirement is to authenticate users which will use my application against customer provided user base. Meaning, customer installs my app, but uses his own users to grant or deny access to my app. Typical, right? I have three options to consider and I need to pick up the one which would be a) the most flexible to cover most common modern environments and b) would take least effort while stay robust and standard. Option (1) - Authenticate locally managing user credentials in some local storage, e.g. file. Customer would then add his users to my application and it will then check the passwords. Simple, clumsy but would work. Customers would have to punch every user they want to grant access to my app using some UI we will have to provide. Lots of work for me, headache to the customer. Option (2) - Use LDAP authentication. Customers would tell my app where to look for users and I will walk their directory resolving names into user names and trying to bind with found password. This is better approach IMO, but more fragile because I will have to walk an unknown directory structure and who knows if this will be permitted everywhere. Would be harder to test since there are many LDAP implementation out there, last thing I want is drowning in this voodoo. Option(3) - Use plain Kerberos authentication. Customers would tell my app what realm (domain) and which KDC (key distribution center) to use. In ideal world these two parameters would be all I need to set while customers could use their own administration tools to configure domain and kdc. My application would simply delegate user credentials to this third party (using JAAS or Spring security) and consider success when third party is happy with them. I personally prefer #3, but not sure what surprises I might face. Would this cover windows and *nix systems entirely? Is there another option to consider?

    Read the article

  • Why is it still so hard to write software?

    - by nornagon
    Writing software, I find, is composed of two parts: the Idea, and the Implementation. The Idea is about thinking: "I have this problem; how do I solve it?" and further, "how do I solve it elegantly?" The answers to these questions are obtainable by thinking about algorithms and architecture. The ideas come partially through analysis and partially through insight and intuition. The Idea is usually the easy part. You talk to your friends and co-workers and you nut it out in a meeting or over coffee. It takes an hour or two, plus revisions as you implement and find new problems. The Implementation phase of software development is so difficult that we joke about it. "Oh," we say, "the rest is a Simple Matter of Code." Because it should be simple, but it never is. We used to write our code on punch cards, and that was hard: mistakes were very difficult to spot, so we had to spend extra effort making sure every line was perfect. Then we had serial terminals: we could see all our code at once, search through it, organise it hierarchically and create things abstracted from raw machine code. First we had assemblers, one level up from machine code. Mnemonics freed us from remembering the machine code. Then we had compilers, which freed us from remembering the instructions. We had virtual machines, which let us step away from machine-specific details. And now we have advanced tools like Eclipse and Xcode that perform analysis on our code to help us write code faster and avoid common pitfalls. But writing code is still hard. Writing code is about understanding large, complex systems, and tools we have today simply don't go very far to help us with that. When I click "find all references" in Eclipse, I get a list of them at the bottom of the window. I click on one, and I'm torn away from what I was looking at, forced to context switch. Java architecture is usually several levels deep, so I have to switch and switch and switch until I find what I'm really looking for -- by which time I've forgotten where I came from. And I do that all day until I've understood a system. It's taxing mentally, and Eclipse doesn't do much that couldn't be done in 1985 with grep, except eat hundreds of megs of RAM. Writing code has barely changed since we were staring at amber on black. We have the theoretical groundwork for much more advanced tools, tools that actually work to help us comprehend and extend the complex systems we work with every day. So why is writing code still so hard?

    Read the article

  • The Partner Perspective from Oracle OpenWorld 2012 - IDC’s Darren Bibby report

    - by Richard Lefebvre
    Below is IDC’s Darren Bibby report on ‘The Partner Perspective from Oracle OpenWorld 2012’. If you missed the 2012 edition, I trust this will give you the willingness to attend next year one! October 26, 2012 I attended my fourth Oracle OpenWorld earlier in October. I always go in with the lens of, "What's in it for partners this year?" Although it's primarily thought of as a customer event - and yes, the bulk of the almost 50,000 attendees are customers - this year's conference was clearly the largest and most important partner event Oracle has ever run. Oracle PartnerNetwork (OPN) Exchange There were more partner attendees than ever, with Oracle citing somewhere around 5000. But the format for partners this year was different. And it was better. Traditionally, Oracle hosts a one-day only Partner Forum on the Sunday before the customer-focused conference begins. This year, the partner content still began on the Sunday, but the worldwide alliances and channels group created an exclusive track throughout the week, just for partners. It featured content specifically targeted towards partners, and was anchored at a nearby hotel. This was a great move for Oracle. The Oracle PartnerNetwork (OPN) team has been in a tricky position for years in that they have enough partners that they need a landmark event in the year, but perhaps not enough to justify a separate, worldwide, large, partner-only event. Coinciding a four day event with Oracle OpenWorld, where anybody who's anybody in the Oracle world attends anyway, is a good solution. The channels leadership team can build from this success for an even better conference next year. It's expected that they will follow a similar strategy. Cloud Announcements for Partners As for the content, it was primarily about the Cloud. For customers, for VARs, for ISVs, for everyone. There were five key Cloud related announcements for partners at the event: Cloud Builder Specialization. This is one of the first broader Specializations that isn't focused on one unique product. It is a designation for partners that offer design and implementation services for private cloud solutions. As such, it will surely be something that nearly every partner will consider, and many will pursue. New Specializations for Cloud Services. Unlike the broad, almost "strategy-level" Specialization above, there are a group of new product-based "merit badges" for many of the new Cloud offerings. Think about a Specialization for the Cloud version of HCM, for instance. Each of these particular specializations will also have Rapid Start implementation methodologies that allow a partner to offer a fixed scope and fixed price bid to customers. Based on the learnings from Oracle Consulting, this means a partner might be able to deliver Cloud HCM in six weeks for a fixed price. In the end, this means more consistent experiences for Oracle customers. Cloud Resale Program. For those partners who achieve one of these Cloud Specializations, it will mean they can actually resell the subscription-based Cloud product. This is important because it has been somewhat of a rarity in the emerging Cloud channel for partners to be able to "take the paper", take the revenue, do the billing, be first line of support etc. This is an important step for Oracle and one the partners will be happy to see. Cloud Referral Program. For those partners who are not as engaged with these specific Cloud products that the Specializations revolve around, there is a new referral program that provides an incentive to recommend Oracle Cloud products. This one-two punch of referral and resale programs is similar in many ways to other vendors who allow more committed partners to resell, while more casual partners can collect fees. It's the model that seems to work. The key to allow a company to resell a subscription product - something that is inherently delivered directly between the vendor and customer - is trust. Achieving a specialization is a good bar to have to meet. Platform as a Service for ISVs. Leveraging some of the overall announcements made by CEO Larry Ellison around a cloud version of its famous database, Oracle also outlined a new ability for ISVs to build cloud services on its new PaaS offering. Details were less available for this announcement, though it's an expected and fitting play for ISVs comfortable with Oracle technology who can now more easily build out cloud applications. There wasn't much talk of an app store to go along with this, but surely it's in the works. Specializations And "The Gap" Coming back to Specializations, Oracle PartnerNetwork (OPN) has 4600 partners worldwide that hold 20,000 Specializations. These are impressive numbers just three years into the new OPN framework. The actual number of Specializations has also grown significantly, up to 111 today and soon around 125 or so with the new Cloud designations. Oracle may need to look at grouping some of these and creating higher level, broader designations that partners could achieve by earning several Specializations in that group. At 125 and growing, this is a lot. On the top of the pyramid, Hitachi Ltd. successfully became the eleventh partner to make it to the highly prestigious Diamond level. Partner programs partially exist in order to recognize capable partners. And it's more than abundantly clear that the Diamond level does this. But I think Oracle has a gap. Specializations show capability in a very specific product area, and all sizes of partners can achieve these. The next level at which to show a level of expertise is the Advanced Specialization. However, this is a massive step up from the regular Specialization. The advanced level requires 50 people to have certification in that particular product area. Most other industry programs have similar higher level statuses, but none are even close to that number. Whereas a customer who sees an Oracle partner with an advanced specialization can be very sure of capability, there is a gap in that there are hundreds or even thousands of 20-50 person solution providers who are top notch in their area of expertise. They will never get to Advanced due to numbers alone. These boutique partners don't really have a way of showing off their talents in the current program. Advanced may not need to be so high to really show that a company has deep expertise. Overall it was a very successful Oracle OpenWorld for Oracle partners of all sizes. There was progress made on making it a bigger and more relevant event. And also on catching up and maybe even leading in some cases with cloud opportunities for partners.

    Read the article

  • RouterOS on Hyper-V (v3/2012) - any way to get it working?

    - by TomTom
    Trying to set up a small VPN point to connect into a remote Hyper-V cluster using ROuterOS. Anyone got it working ON Hyper-V with the latest builds of RouterOS? It seems the legacy network adapter is not supported anymore either (or just broken). The platform is a Windows Server 2012 RC. This is not a high performance setup - the RouterOS wont do the routing for more than the backend administrative access, and the only real traffic we will see there is when ISO images for new operating systems are uploaded. Otherwise we will have possibly RDP traffic as well as web / http traffioc, but this is internal only (dashboards, some control panel). The server has no public business. So the price for non virtualized network cards is ok for me. After hooking up - ping just does not work. After some time I see in windows (arp -a on the command line), so I know that the Hyper-V side is set up properly. Just no packets arrived. I have turned off all protection on Hyper-V (or : not turned them on), so no MAC spoofing protection etc. in the Advanced page for the legacy adapters. Unless I can get it work I will have to resort to using a windows install as router / VPN endpoint, which introduces another OS into the fabric (we run all routers etc. so far on mikrotik in hardware, which is why I want this one to be RouterOS, too). And no, putting hardware there is NOT an option - the cost would be significant.

    Read the article

  • Watchguard Firewall WebBlocker Regular Expression for Multiple Domains?

    - by Eric
    I'm pretty sure this is really a regex question, so you can skip to REGEX QUESTION if you want to skip the background. Our primary firewall is a Watchguard X750e running Fireware XTM v11.2. We're using webblocker to block most of the categories, and I'm allowing needed sites as they arise. Some sites are simple to add as exceptions, like Pandora radio. That one is just a pattern matched exception with "padnora.com/" as the pattern. All traffic from anywhere on pandora.com is allowed. I'm running into trouble on more sophisticated domains that reference content off of their base domains. We'll take GrooveShark as a sample. If you go to http://grooveshark.com/ and view page source, you'll see hrefs referring to gs-cdn.net as well as grooveshar.com. So adding a WebBlocker exception to grooveshark.com/ is not effective, and I have to add a second rule allowing gs-cdn.net/ as well. I see that the WebBlocker allows regex rules, so what I'd like to do in situations like this is create a single regex rule that allows traffic to all the needed domains. REGEX QUESTION: I'd like to try a regex that matches grooveshark.com/ and gs-cdn.net/. If anybody can help me write that regex, I'd appreciate it. Here is what is in the WatchGuard documentation from that section: Regular expression Regular expression matches use a Perl-compatible regular expression to make a match. For example, .[onc][eor][gtm] matches .org, .net, .com, or any other three-letter combination of one letter from each bracket, in order. Be sure to drop the leading “http://” Supports wild cards used in shell script. For example, the expression “(www)?.watchguard.[com|org|net]” will match URL paths including www.watchguard.com, www.watchguard.net, and www.watchguard.org. Thanks all!

    Read the article

  • Why does my Intel HDA onboard sound card not have a "Mix" device / channel?

    - by Hanno Fietz
    I want to be able to record what my sound card outputs on the speakers / headphones. This question is all over the interwebs again and again, and there seem to be two outcomes: in your selection of audio input devices, there's a device called "Stereo Mix", or similar, which is the "loopback" device for audio. Choose that in your recording tool and you're done. there's no such device and only speculative posts about why that may be. Now, I'm using ALSA and an Intel HDA chipset on my mainboard under Kubuntu Karmic. I have some 5-10 output channels and "Mic", "Front Mic" and "Line" for input. All of those are available in KMix, Audacity and other software. No "loopback" / "Mix" / whatever. Do I have to get some driver / kernel module set up ALSA in some way set up my system configuration in some way use a software solution (such as JACK) I had a look at JACK, and found it rather hard to understand, it's either an expert tool or just clumsy, I couldn't say. At least, I wasn't able to figure out how to achieve what I wanted. One of my problems seems to be that I don't understand where and how the mixing happens. Are there sound cards which just aren't able to do it? Why does the sound card matter at all, since I could in theory grab the data stream at some point before it goes to the hardware, right?

    Read the article

  • Intel 1.83 Mac Mini upgraded to 1.5 gig for Snow Leopard

    - by Paula
    Even though I've upgraded countless video cards, RAM, harddrives, motherboards in PCs... this will be my first mac mini RAM upgrade. I've watched the classic "putty knife" video. (Absurd method... but I guess it's what I'm stuck with.) I have a 1.83 Intel-based Mac Mini from 2007-2008, with 1 gig of RAM. (Two 512 sticks) Can I install 1 gig + 512 ? (Or do I have to throw away my existing sticks and buy two 1 gig sticks?) This old machine is rarely used... so I want to spend the absolute minimum on this RAM upgrade. We ONLY use it to run xCode... nothing more. But wanted to increase the RAM so we can install Snow Leopard. I have no idea how many pins the memory has. I printed out over FORTY pages of specs about this machine from "About this Mac"... but didn't find what I needed. Does this sound right: DDR2 SDRAM (but no mention of SO-DIMM) 667MHZ (but don't know if I can use faster also) Pin count: Unknown Computer model number: Unknown (But I "think" it's an MB138/A) PC2 RAM (unknown... not mentioned) 5300 (unknown... not mentioned) Mfg date: (unknown... not mentioned) Number of slots: (unknown... not mentioned) Laptop or desktop RAM: (unknown... not mentioned)

    Read the article

  • BSOD Before Windows Will Loads - Graphics Related

    - by Brian
    Alright deep breath here: (Windows 7 Home Premium 64 bit btw) Today I installed Star Craft 2 Beta. After trying to log in, it had some issues where it said my device stopped working (referring to my video device I have to imagine). After I force quit the game there were some random "hot" (various colors if i remember correctly) pixels on the screen. I decided to reboot and try again with similar results. I figured that maybe my display drivers could stand to be updated (I don't frequently update them as I don't often run into problems). I went out to nVidia's website and grabbed the latest drivers for Windows 7 64 bit GeForce 9 series. (I have SLi-ed 9800 GTs). Everything seemed to install fine and I performed the restart. This is when things went from bad (can't play SC2 beta ;) ) to worse (can't boot into windows!). Initially the very first splash screen - I think it's the bios splash screen - had lines of colored pixels covering it. It then displayed a screen that had lots of "(" on it. After that it showed the normal windows 7 splash screen as if it were going to load into Windows. Before getting much further, it BSODed on me. It was a 0x0000003B stop error. At nvlddmkm.sys. A little digging let verified that this was a problem with an nVidia graphics device, not a real shocker. Windows decided it would try to help me diagnose the problem, which it's only answer to was a System Restore, which did nothing to alleviate the problem. I was able to boot up fine in safe mode and was not able to roll back the driver, however I did uninstall the driver and reboot. I still had the graphical anomalies during the first two screens (same colored "."'s and weird "("'s), but there was NOT a stop error. Windows loaded up, found a default driver for the device and installed it and I restarted to let it load - and had yet another BSOD Stop error. Repeat driver uninstall, this time I reloaded the same version (I think it's possible that I was running a 32 bit version or a vista versus windows 7 version, but I don't have that information handy) of the nVidia driver from their website. Restart, same anomalies, same Stop Error. I am at a loss - At this point all I can think is that the firmware for the Video cards got fried or there's actual damage to the cards which I sincerely hope is not the case but the sooner I know the better. Any insight into what I might be able to do to troubleshoot/fix this problem would be most helpful. Attached below is a dump from DxDiag. Please let me know if there is more info that I could provide. ------------------ System Information ------------------ Time of this report: 3/18/2010, 23:22:48 Machine name: BRIAN-PC Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255) Language: English (Regional Setting: English) System Manufacturer: Dell Inc System Model: XPS 630i BIOS: Phoenix - AwardBIOS v6.00PG Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (4 CPUs), ~2.3GHz Memory: 8192MB RAM Available OS Memory: 8190MB RAM Page File: 1855MB used, 14521MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.01.7600.16385 32bit Unicode DxDiag Previously: Crashed in DirectShow (stage 1). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: Manufacturer: Chip type: DAC type: Device Key: Enum\ Display Memory: n/a Dedicated Memory: n/a Shared Memory: n/a Current Mode: 1600 x 1200 (32 bit) (1Hz) Driver Name: Driver File Version: () Driver Version: DDI Version: unknown Driver Model: unknown Driver Attributes: Final Retail Driver Date/Size: , 0 bytes WHQL Logo'd: n/a WHQL Date Stamp: n/a Device Identifier: {D7B70EE0-4340-11CF-B123-B03DAEC2CB35} Vendor ID: 0x0000 Device ID: 0x0000 SubSys ID: 0x00000000 Revision ID: 0x0000 Driver Strong Name: Unknown Rank Of Driver: Unknown Video Accel: Deinterlace Caps: n/a D3D9 Overlay: n/a DXVA-HD: n/a DDraw Status: Not Available D3D Status: Not Available AGP Status: Not Available ------------- Sound Devices ------------- Description: Speakers (Realtek High Definition Audio) Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek Digital Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek HDMI Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No --------------------- Sound Capture Devices --------------------- Description: Microphone (Realtek High Definition Audio) Default Sound Capture: Yes Default Voice Capture: Yes Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 Description: Realtek Digital Input (Realtek High Definition Audio) Default Sound Capture: No Default Voice Capture: No Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 ------------------- DirectInput Devices ------------------- Device Name: Mouse Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: Keyboard Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: ESA FW Update Attached: 1 Controller ID: 0x0 Vendor/Product ID: 0x0955, 0x000A FF Driver: n/a Poll w/ Interrupt: No ----------- USB Devices ----------- + USB Root Hub | Vendor/Product ID: 0x10DE, 0x026D | Matching Device ID: usb\root_hub | Service: usbhub | +-+ USB Input Device | | Vendor/Product ID: 0x0955, 0x000A | | Location: Port_#0002.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant device | | | Vendor/Product ID: 0x0955, 0x000A | | | Matching Device ID: hid_device | | +-+ USB Input Device | | Vendor/Product ID: 0x046D, 0xC01E | | Location: Port_#0003.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant mouse | | | Vendor/Product ID: 0x046D, 0xC01E | | | Matching Device ID: hid_device_system_mouse | | | Service: mouhid ---------------- Gameport Devices ---------------- ------------ PS/2 Devices ------------ + Standard PS/2 Keyboard | Matching Device ID: *pnp0303 | Service: i8042prt | + Terminal Server Keyboard Driver | Matching Device ID: root\rdp_kbd | Upper Filters: kbdclass | Service: TermDD | + Terminal Server Mouse Driver | Matching Device ID: root\rdp_mou | Upper Filters: mouclass | Service: TermDD ------------------------ Disk & DVD/CD-ROM Drives ------------------------ Drive: C: Free Space: 324.3 GB Total Space: 608.4 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: D: Free Space: 1.0 GB Total Space: 2.0 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: E: Model: TSSTcorp DVD+-RW TS-H653F SCSI CdRom Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7600.16385 (English), , 0 bytes -------------- System Devices -------------- Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B7&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&18 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AF&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0A Driver: n/a Name: PCI standard host CPU bridge Device ID: PCI\VEN_10DE&DEV_03A3&SUBSYS_02491028&REV_A2\3&2411E6FE&1&00 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0267&SUBSYS_02491028&REV_A1\3&2411E6FE&1&78 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B6&SUBSYS_02491028&REV_A1\3&2411E6FE&1&10 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AE&SUBSYS_02491028&REV_A1\3&2411E6FE&1&09 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0272&SUBSYS_02491028&REV_A3\3&2411E6FE&1&52 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0266&SUBSYS_02491028&REV_A1\3&2411E6FE&1&70 Driver: n/a Name: LSI 1394 OHCI Compliant Host Controller Device ID: PCI\VEN_11C1&DEV_5811&SUBSYS_02491028&REV_70\4&14591D7E&0&2880 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B5&SUBSYS_02491028&REV_A1\3&2411E6FE&1&06 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AD&SUBSYS_02491028&REV_A1\3&2411E6FE&1&08 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0270&SUBSYS_02491028&REV_A2\3&2411E6FE&1&48 Driver: n/a Name: Standard Dual Channel PCI IDE Controller Device ID: PCI\VEN_10DE&DEV_0265&SUBSYS_02491028&REV_A1\3&2411E6FE&1&68 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&4BABE2A&0&0028 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B4&SUBSYS_02491028&REV_A1\3&2411E6FE&1&07 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&01 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_026F&SUBSYS_CB8410DE&REV_A2\3&2411E6FE&1&80 Driver: n/a Name: NVIDIA nForce PCI System Management Device ID: PCI\VEN_10DE&DEV_0264&SUBSYS_02491028&REV_A3\3&2411E6FE&1&51 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&10BD3C89&0&0018 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B3&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0E Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AB&SUBSYS_02491028&REV_A1\3&2411E6FE&1&04 Driver: n/a Name: Standard Enhanced PCI to USB Host Controller Device ID: PCI\VEN_10DE&DEV_026E&SUBSYS_02491028&REV_A3\3&2411E6FE&1&59 Driver: n/a Name: PCI standard ISA bridge Device ID: PCI\VEN_10DE&DEV_0260&SUBSYS_02491028&REV_A3\3&2411E6FE&1&50 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&11 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B2&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0D Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&02 Driver: n/a Name: Standard OpenHCD USB Host Controller Device ID: PCI\VEN_10DE&DEV_026D&SUBSYS_02491028&REV_A3\3&2411E6FE&1&58 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&12 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B1&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0C Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A9&SUBSYS_02491028&REV_A1\3&2411E6FE&1&03 Driver: n/a Name: High Definition Audio Controller Device ID: PCI\VEN_10DE&DEV_026C&SUBSYS_02491028&REV_A2\3&2411E6FE&1&81 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B8&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&28 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B0&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0B Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A8&SUBSYS_02491028&REV_A2\3&2411E6FE&1&05 Driver: n/a Name: NVIDIA nForce Networking Controller Device ID: PCI\VEN_10DE&DEV_0269&SUBSYS_02491028&REV_A3\3&2411E6FE&1&A0 Driver: n/a --------------- EVR Power Information --------------- Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality) Quality Flags: 2576 Enabled: Force throttling Allow half deinterlace Allow scaling Decode Power Usage: 100 Balanced Flags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 50 PowerFlags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 0

    Read the article

  • Cisco ASA Act as a Hardware Security Module?

    - by Derek
    Hello, We have a partner that is requiring us to get a HSM for a web application that we host for them. This is something new for us, we've always installed our SSL certificates on our web servers and never needed a hardware device. We currently have 2 Cisco ASA 5510 firewalls in an active/standby configuration. Both ASAs have a ASA-SSM-10 security module installed in them. The web application is a standard HTTPS webpage with no authentication required. I was wondering if we could use our Cisco ASAs to meet this requirement or if we'll have to buy another device. I was doing some searching and read about Cisco's clientless webvpn feature. It sounds like it might work, but I'm not sure. We basically want the ASA to handle the SSL and proxy the connection to our web servers. We do not want to prompt for a username or password to connect or show any portals, just display the web page. If the ASA cannot do this, does any one have any recommendations for network attached hardware security modules? We are using VMware vCenter, so we'd rather have an external device attached to the network, rather than buying HSM cards for every ESXi host. Thanks, Derek

    Read the article

  • Disabling DNS Registration on Server 2008 R2

    - by WaldenL
    I want to tell a server 2008 R2 machine to NOT register it's IP addresses in DNS. I go into the Advanced tab on IPv4 and turn off "Register this connection's addresses in DNS" simple! But... the addresses are updated in DNS anyway! And actually the A record is eventually removed from the DNS server. I've confirmed that the checkbox is off by looking at it myself, and by checking the RegistrationEnabled registry value for that adapter. Both confirm that the registration is off. I've turned of DNS debug logging on the DNS server and I can see DNS Update requests coming from the server in question! This should not happen. What's even odder is that eventually (several hours) the A record for the server (which I added by hand!) is removed from the DNS server. I've also confirmed that scavaging is off on both DNS servers in the domain. Ideas? Edits: Per the comment: The server has static IP addresses. However, it's got two of them on one adapter. Since I'm in a VM (HyperV) environment I just spun up a second adapter and moved the second IP to the second adapter. I set the first adapter to auto-register (since that's the IP I want anyway) and the second adapter to NOT auto-register. We'll see if this is any better. Not any better. On a reboot of the server the registration was removed from DNS. Seems both cards are still contacting the server. Based on the DNS log the card that shouldn't register in DNS is registering a 'delete' request. And then the card that should register is registering an add request but that's ignored. I'm totally confused at this point.

    Read the article

  • "Modern" Ethernet over coax

    - by Electrons_Ahoy
    So, I've just bought a house. It's reasonably new - built in the early '00s. One of the features that got built in was a cable TV drop in every room. The cabling is gorgeous - there's even a wiring cabinet of sorts in a closet where the cables all tie together to the splitter to the outside line. Of course, my problem is that I only own the one TV. I do, however, own a few computers. What I would love to be able to do is drop a switch in the wiring closet and run 100/1000BASE-T ethernet over the coax in the walls I wouldn't otherwise be using. My fantasy would be if you could get some kind of adapter-plug-thing that would take a coax plug on one side and a cat5/RJ45 plug on the other. Had anyone else done this? Any suggestions? (There are a few other options that suggest themselves - first, I could just use the existing cabling channels and re-run cat5 or 6 through the walls. While tempting, that sounds like more work than I really want to put in, so I'm calling that Plan B. Also, I could just scare up a mess of old 10BASE2 cards and run the house on thinnet, all mid-90s style. While I think I'd get major style points for that, I don't think I can get a 10BASE2 adapter for the new laptop. Also, I have all these super-snazzy gigabit adaptors I'd like to be using. And so forth.)

    Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >