Search Results

Search found 1940 results on 78 pages for 'tech'.

Page 45/78 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Upgrading a PERC h310 to a PERC H710 mini RAID controller on a Dell R620

  - by Gregg Leventhal

  I have an ESXi 5.0 Free license host using an internal Datastore (RAID 5, 5 Disk) that was configured with a Dell PERC h310 RAID controller. The disk performance was very poor, so I upgraded to the PERC H710 Mini. The IT Tech installed the controller and powered the host back on. I had to rescan the controller and the datastore appeared. Should any settings be changed in the RAID BIOS, or should the default settings be sufficient? Is they anything to be aware of when performing this type of upgrade in order to achieve the maximum performance?

  Read the article

• LSI 9211-8i won't boot in KVM

  - by Paul McMillan

  I'm running ubuntu 11.04 with an LSI 9211-8i in IT mode with the latest firmware (10). I'm using KVM with VT-d enabled to pass the entire PCIe device through to the guest OS. I have the device disabled in the system BIOS. When I boot my virtual machine, the adapter quits during bios initialization with the following error: Unable to load LSI Corporation MPT BIOS MPT BIOS Fault 0Ch encountered at adapter PCI(00h,04h,00h) Press any key to continue... I know the virtualization is correctly enabled. I've blacklisted the kernel modules in the host OS. Has anyone else encountered this error? I'm about out of ideas here. Edit: I contacted LSI tech support about this, and they suggested that I try RedHat and Xen. Apparently they don't test or support anything else.

  Read the article

• Wireless AP Placement and Digramming

  - by Matt Simmons

  I'm trying to research the best placement of wireless APs in a given space, and I'm running into problems in gathering information. I found (what I thought was) a great source in this tech republic article: http://techrepublic.com.com/5206-6230-0.html?forumID=82&threadID=163120 While this diagram seems detailed and overall very informative, there were a lot of comments talking about how it was lacking in things like "wire racks, microwaves, concrete walls, motors..." etc. Maybe I'm rash, but I just sort of looked around my office (which is, albeit, somewhat smaller than the one diagrammed), and went "uhhh, there", and hooked up the AP. It seems to cover everywhere. I imagine if my office quadrupled in size, I'd logically divide it up and put four APs in, with a similar amount of thought devoted to each. So, suppose I had a much more complex office. What tools (both diagramming and surveying) do you use to plan your AP placement?

  Read the article

• Wireless AP Placement and Digramming

  - by Matt Simmons

  I'm trying to research the best placement of wireless APs in a given space, and I'm running into problems in gathering information. I found (what I thought was) a great source in this tech republic article: http://techrepublic.com.com/5206-6230-0.html?forumID=82&threadID=163120 While this diagram seems detailed and overall very informative, there were a lot of comments talking about how it was lacking in things like "wire racks, microwaves, concrete walls, motors..." etc. Maybe I'm rash, but I just sort of looked around my office (which is, albeit, somewhat smaller than the one diagrammed), and went "uhhh, there", and hooked up the AP. It seems to cover everywhere. I imagine if my office quadrupled in size, I'd logically divide it up and put four APs in, with a similar amount of thought devoted to each. So, suppose I had a much more complex office. What tools (both diagramming and surveying) do you use to plan your AP placement?

  Read the article

• Can a usb cable carry 12v?

  - by zm15

  Here's what i'm wanting to do. I have a Acer Iconia A500 tablet. I want to plug it in, in the car, but it has a barrel plug and I don't want to buy an inverter. The car adapters are expensive for what they do. I already have a 2.1 amp usb car charger meant for the iPad: http://www.amazon.com/Kensington-K33497US-PowerBolt-Charger-Compatible/dp/tech-data/B003PU01M4/ref=de_a_smtd And i want to use this usb cable from the 2.1 amp port to plug into the A500: http://www.amazon.com/gp/product/B00304DZ7I/ref=ox_sc_act_title_2?ie=UTF8&m=A1HPBDJJIXKXS7 Here are the specs on the original wall charger if that helps: http://www.phihong.com/assets/pdf/PSA18R.pdf The usb cable says it's 5v, but the original charger says it outputs 12v. But since it's just a cable... wasn't sure if that really made a whole lot of difference since it's only 1.5 amps from the wall charger. Is it possible to use that usb cable through the powerbolt car charger, to charge the A500?

  Read the article

• Windows Vista SP2 and DEP Woes for Older Program

  - by neezer

  I have a database client (4D 2004 Client... which, for the record, I vehemently hate but am forced to use because our company is still running this) that I'm trying to run in Windows Vista SP2. I've added the program to the DEP Exceptions list (per a 4D tech article detailing this problem... sorry, can't find the link now) and restarted the computer, but every time I try to log-in to our remote database, the program is shut down by Vista, citing a DEP event. And yes, I have restarted the computer several times, so the new DEP settings should be in effect. I'm a bit confused at this since I specifically added the 4DClient.exe to the DEP Exception list! I realize that very few (if any) of you might have this exact problem with this exact program, but can anyone shed light on the fact that DEP still seems to be enabled for a program that I've specifically added to the DEP exception list?!?

  Read the article

• Using Virtual box to practice malware removal?

  - by jwsENLBH2XavZ

  Hello, I have Windows 7, and installed virtualbox on it with a copy of Windows XP pro sp3 with all updates. I want to use the virutal environment to practice removing malware....in other words, I want to infect it on purpose. What is the safest way to do this so that win 7 doesn't get infected as well? Any settings I should change in virutalbox? And before anyone asks, no, I don't write viruses/malware. I am a tech, and would like to practice removing malware. Thanks.

  Read the article

• 301 redirect Rule For Load Balance F5 BigIp

  - by Kshah

  I have a load balancer F5 Big ip for my website. Currently, I am having 302 redirect in place; however, I wanted to apply 301 but dont know how. For example: My website (abc.com) when typed 302 redirects to abc.com/index and when typed www.abc.com 302 redirects www.abc.com/index. I wanted to have a rule which will help me in abc.com - 301 redirect - www.abc.com/index abc.com/index - 301 redirect - www.abc.com/index www.abc.com - 301 redirect - www.abc.com/index Below is the code that my tech person is trying: Redirect to WWW when HTTP_REQUEST { if { [HTTP::host] equals "abc.com" or [HTTP::host] equals "abc.co.in" or [HTTP::host] equals "www.abc.co.in" } { if {!( [HTTP::path] equals "/")} { HTTP::respond 301 Location "http://www.abc.com[HTTP::path]" } } } Redirect POST when HTTP_REQUEST { if { [HTTP::method] equals "POST" } { persist source_addr pool shop_shop_vr4_http } } Redirect-VR4 HOMEPAGE when HTTP_REQUEST { if { [HTTP::path] equals "/" or [HTTP::path] starts_with "/target/" or [HTTP::path] starts_with "/logs/" or [HTTP::path] starts_with "/config/" } { HTTP::redirect "http://[HTTP::host]/index.jsp.vr" } }

  Read the article

• Windows Resource Monitoring Programs

  - by Sal

  I work at a small tech start up managing websites with our own in house server side code. (In production, we use Windows Server 2008 boxes, running Java 6. In our dev boxes, we use Windows 7 running Java 7.) Recently, we had an issue where some of our boxes in production failed, and we didn't have means of trouble shooting, since we keep little to no monitoring logs about a given box's CPU/memory/RAM usage, etc. So, I'm wondering if there is some commercial/freeware that's the standard for performance monitoring/logging. Essentially, I'm just looking for an analytics system that is similar to the Windows Task Manager or the Resource Monitor, that serializes all of its data periodically. Ideally, I'd like to find a program that's also extensible, in case I'd like to add addition monitors in the future.

  Read the article

• Win 7 Privilege Level (Run as administrator) via GP or command line

  - by FinalizedFrustration

  Is there a way to set the Privilege Level for legacy software via group policy or on the command line? I have some legacy software, which we unfortunately cannot move away from. This software requires administrator access. I know I can go into the Properties dialog and check "Run this program as an administrator" on every single instance on every single one of my workstations, but that gets old after the 30th install. If I had my way, we would dump this software, find some software that did what we needed, was fully compliant with Win7 security best-practices and give everyone limited user accounts... However, I am not the boss, so everyone gets administrator accounts. Given that, I suppose I could just tell everyone to open the context menu and choose "Run as administrator", but we have some very, very, VERY low-tech users, and half of them might just choose "Delete" instead. Anyone know of a way to set this option on the command line? or better yet, through Group Policy?

  Read the article

• Can I upgrade my Soltek sl-67a-c motherboard from Pentium II to Pentium III?

  - by jedatu

  I have a Pentium III processor and I thought I would replace the Pentium II on my Soltek SL-67A-C. The motherboard has Slot 1 so the PIII fits in fine, however, when I turn on the computer the bios does not come up. Here's the link to some specs on the board: http://stason.org/TULARC/pc/motherboards/F/FLASH-TECH-INC-Pentium-II-Deschutes-SL-67A-C.html I know that I updated the bios at one time. I see references to a "67af3.zip" bios upgrade file out there but can't find any source to download it. I am thinking I may have to adjust the jumpers on the motherboard to match the speed of the processor, but I am not sure how to go about that. Any suggestions?

  Read the article

• Fighting Spam - What can I do as an: Email Administrator, Domain Owner, or User?

  - by Chris S

  This is a Canonical Question about Fighting Spam. Also related: How to stop people from using my domain to send spam? There are so many techniques and so much to know about fighting SPAM. What widely used techniques and technologies are available to Administrator, Domain Owners, and End Users to help keep the junk out of our inboxes? We're looking for an answer that covers different tech from various angles. The accepted answer should include a variety of technologies (eg SPF/SenderID, DomainKeys/DKIM, Graylisting, DNS RBLs, Reputation Services, Filtering Software [SpamAssassin, etc]); best practices (eg mail on Port 25 should never be allowed to relay, Port 587 should be used; etc), terminology (eg, Open Relay, Backscatter, MSA/MTA/MUA, Spam/Ham), and possibly other techniques.

  Read the article

• IIS seems to send email twice

  - by David Brunelle

  Hi, we have a request page in our website that send email to confirm the request. It seem that whenever this page is accessed, some (not all of them) are sent more than once at different time, sometime hours apart. The code (which is an old ASP page) looks fine as it sends only once to the recipient. So I doubt it's a programming related problem. When looking at the Exchange server, the tech told me that he seems to be receiving the request twice at different time, so the problem comes from what's between the code and Exchange. My hypothesis is that IIS seem to 'remember' the page and rerun it for some reason. Any hint on where to start? We have IIS 6 (in french if it makes any difference) with Exchange 2007. IIS is running on a Windows Server 2003 machine (virtual machine I believe) in a DMZ. I don't know about Exchange. Thank you.

  Read the article

• Open Source webapp that shows PC / Projector status in 30+ Lecture rooms

  - by Seanchán

  I am looking for a simple web application that only has a simple graphical representation of the current status of 30+ lecture rooms. I.e. Green = good, Red=bad i.e. PC or Projector not working. With a little message and a ETA as well. I am not looking for monitoring software, merely a way for a tech to flag a room as "technically challenged" until 1PM or until "Friday 10AM". With a message for those lecturers who are interested: "Waiting on replacement bulb" or "Power supply gone" I know this is a simple thing to code up yourself, but I am looking for something that has been around for a few years that has some cool extra little functionality that you wouldn't think of yourself. I just can't find anything like that out there. And just to be clear: not monitoring software, more like lecturer feedback web app.

  Read the article

• Program to print gCal or iCal calendars in a monthly one calendar per column format

  - by David Smith

  I'm moving my family off of using the low tech "Boynton Mom's Family Calendar" to schedule things but I'd like to be able to create a monthly printout of the calendar in the same "Boynton" format (I'm sure it has an official name). The format is kind-of like a spreadsheet where each row of the calendar is a different day of the month and there is a separate column for each person in the family. I have all our calendars on Google but they are also accessible from iCal on the Mac. Is there a Mac program that can get the data from gCal or iCal print out the calendars in the Boynton format?

  Read the article

• Windows 7 : Any way to disable "show caracter" in WIFI network properties?!

  - by Fox

  Hi everyone, Here's my issue. I'm working in a school as IT Tech and I'm currently planning to roll out Windows 7 on students laptop. The issue is : When you go to the properties of a WIFI network, you have the fields to input the WIFI key, WPA2 key here in my case, and you also have a checkbox that allow you to "unmask" the caracters of the wifi key. This is actually the problem. Anyone who can access the WIFI network properties, will be able to see the WIFI key, which is really an issue in a school envrironnement where student are all eager to get the key for their precious IPod Touch, what I don't want to happen for obvious reasons... So, is there a way to disable that checkbox or else, make the field cleared out when the checkbox is checked, just like it was on Windows XP or Vista? Thanks all for your answer.

  Read the article

• What is the crappiest network build you've ever seen?

  - by Ivan Petrushev

  This is only about networks you have seen personaly, not heared from others or seen on pictures at the web. Cables hanging from the ceiling lamps? Cables going trough culverts and other tubes? Switches and other equipment in the cleaner's closet? Cleaning lady's rags drying hanging from the cables? Key to the main node door possesed only by the janitor (or other non-tech and completely non-network-related guy)? Switches powered by foreign power adapters (cheaper and providing non-specified voltage or amperage)? All of this was in my old dormitory. Tell us about your bad experience.

  Read the article

• Plesk 9.2 vs. DotNetPanel

  - by Pai Gaudêncio

  Howdy, Anyone with experience on using both control panels can tell me which one is better suited to run on a windows shared hosting account? I have the option of choosing one of them for my shared hosting account. The web hosting guys (MochaHost) say that DotNetPanel (DNP) is better than Plesk (more features, newer architecture, faster), but looking at the DNP interface I honestly can't say that I agree with them. The big advantage of DNP over Plesk for me is the fact that I can only run .Net 4.0 using DNP (Plesk doesn't support .Net 4.0 yet, as the tech support told me). Thanks

  Read the article

• Enable hardware virtualization in BIOS?

  - by rhon

  I am running a FOXCONN AM2+ M61PMV with an AMD Athlon II X2 240 Windows 7 ultimate 64 bit. From startup I have hit the del key and the options for enabling the hardware virtualization are not there. I have checked the Microsoft tool that says I can run virtual and i have checked SecurAble, that says yes. But I have an open case w/microsoft (they've been trying for a week [7 tech support people later]) and they're saying that I need to ensure that the hardware is enabled. Where do I go to see? Is there another way besides from the startup?

  Read the article

• what does "Net user administrator /active:yes" do to a computer?

  - by Rees

  i just purchased a new laptop and had some issues with it... I called tech support and they had me run this command in cmd prompt by right clicking the cmd icon and selecting "run as administrator" with root C:\windows\system32: "Net user administrator /active:no" after it was determined that it didn't fix the issue we ran this code "Net user administrator /active:yes" i then rebooted..and was asked for my windows login for my user account "Rees" as usual.. however ALL my settings where gone (including my desktop files) as though it was the first time I booted up. WHAT in the world happened with this command?? I desperately NEED my user accounts and files back to how they were!! (running windows 7) Please help!

  Read the article

• Setup a DNS wilcard and MX record in the same zone

  - by Nicolas BADIA

  I'd like to know how to configure my DNS to be able to use a wildcard for my domain and an MX record together. Here is what I've done: @ IN SOA dns100.ovh.net. tech.ovh.net. (2012052100 86400 3600 3600000 300) IN NS ns100.ovh.net. IN NS dns100.ovh.net. IN MX 1 mail.gestixi.com. IN A 91.121.39.211 * IN CNAME gestixi.com. www IN CNAME gestixi.com. The problem is that when I check my DNS, I get this error: MX records shall not point to an alias defined by a CNAME Because of this error, it look like I can't send mails from some internet providers.

  Read the article

• HP Envy webcam pictures all purple

  - by kousen

  I have a new HP Envy 15 with an integrated webcam, running Win 7. It works, but all the images are purple, suggesting to me that the red and blue guns are working, but the green isn't. The problem shows up on both their own software and on Skype. I talked to tech support, and they had me update the BIOS, reinstall the hardware BIOS for the webcam, and update the webcam software. It therefore sounds like a hardware problem, but they won't back that unless I do a full restore, which would wipe my disk of all the software I've spent the last couple of weeks configuring. Is there anything else I can try? Other than just buying another webcam, I mean. Any suggestions would be appreciated.

  Read the article

• wmic output well formed xml on remote queries

  - by Mervin

  I want to use the WMI command line tool (wmic) to get information about windows computers on the network and output it as valid xml. However, I can't seem to find the right way to do this as the outputted xml currently contains invalid tokens for which I think I should use the /TRANSLATE:basicxml switch. The command: wmic /NODE:"tech-demo" /IMPLEVEL:Impersonate /USER:MyUser /PASSWORD:MyPassword /PRIVILEGES:DISABLE /AUTHLEVEL:Pkt /AUTHORITY:"ntlmdomain:companydomain.local" PATH Win32_LogicalDisk GET * /FORMAT:rawxml This command runs but returns invalid xml tokens ('<' and '' I think? edit: it appears to fail parsing at ‹) When I add the translate switch I get the message: Can not use credentials for local connections a bit strange that it tries to query the local pc when I add the switch.. Help would be greatly appreciated.

  Read the article

• cloud/grid computing

  - by tom smith

  Hi guys. I'm appologizing in advance to the guys who will tell me this isn't a tech/server/IT issue! But I've been beating my head around this for a couple of days now. I'm trying figure out who to talk to, or which company I can approach to try to see if there are Grid/Cloud Computing companies who have programs setup to deal with colleges. I'm dealing with a compsci course, and we're looking at a few projects that would require a great deal of computing/computational resources. But in calling different companies (HP/Rackspace/etc..) I'm either not getting through to the right depts, or to the right people, or the companies just aren't setup for this. There are plenty of companies who have discounts for desktop software/hardware, but who in the biz deals with discounts/offerings for Cloud/Grid Computing solutions?? Any thoughts/pointers would be greatly appreciated. Thanks -tom

  Read the article

• background copy large files to a laptop?

  - by Roy Pardee

  Hey All, I like to watch windows media center recorded TV files on my laptop in bed. I find thought that when the programs are in HD I have a lot of stuttering and delays--no doubt b/c of the amount of data being transferred. I actually have a fair amount of space on the laptop's hdd, and wouldn't mind moving the files onto that hard drive, where no doubt my problem would go away. But that requires some planning & time for the files to move. Is there a utility out there that would kind of 'trickle' the files over to the laptop over a long period of time, w/out soaking its bandwidth? Something like ms' BITS tech? Both machines are running win7. Many thanks! -Roy

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >