Search Results

Search found 19408 results on 777 pages for 'output formats'.

Page 450/777 | < Previous Page | 446 447 448 449 450 451 452 453 454 455 456 457  | Next Page >

• Stream tar.gz file from FTP server

  - by linker

  Here is the situation: I have a tar.gz file on a FTP server which can contain an arbitrary number of files. Now what I'm trying to accomplish is have this file streamed and uploaded to HDFS through a Hadoop job. The fact that it's Hadoop is not important, in the end what I need to do is write some shell script that would take this file form ftp with wget and write the output to a stream. The reason why I really need to use streams is that there will be a large number of these files, and each file will be huge. It's fairly easy to do if I have a gzipped file and I'm doing something like this: wget -O - "ftp://${user}:${pass}@${host}/$file" | zcat But I'm not even sure if this is possible for a tar.gz file, especially since there are mutliple files in the archive. I'm a bit confused on what direction to take for this, any help would be greatly appreciated.

  Read the article

• Doing "text mode 'splash' game" during boot.

  - by Vi

  Sometimes I want to do something (for example, playing a simple text-mode game) while the system is booting up. This is especially useful when lengthy reiserfs transaction replays are happening. Current hacky way of doing it is: Put the program on initramfs. Before running /sbin/init, "openvt 2 /my/program". Turn off messages from kernel (sysrq 0) Override /dev/console with /dev/null (to prevent boot messages). The problems are: There are STILL some messages interfering with program output. I can't see boot messages by switching to that virtual terminal back. After finishing the boot sequence, /dev/tty2 ends up being attached both to getty and my program. How to do it properly without of running graphical splashes? The system is Linux Debian Squeeze, no dependency based sysv scripts.

  Read the article

• ATI 9550 shows up as laptop in displays after update to 12.04, how do I fix this?

  - by D_H

  My guess is this is on here somewhere but I have searched and even tried looking at bunch of other similar video problems. My ATI 9550 shows up as laptop in displays after update to Ubuntu 12.04, how do I fix this? I found the following command on another post sudo lshw -c video. I get this when I run that command: *-display:0 UNCLAIMED description: VGA compatible controller product: RV350 AS [Radeon 9550] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 66MHz capabilities: agp agp-3.0 pm vga_controller bus_master cap_list configuration: latency=32 mingnt=8 resources: memory:c0000000-cfffffff ioport:c000(size=256) memory:e5000000-e500ffff memory:e4000000-e401ffff *-display:1 UNCLAIMED description: Display controller product: RV350 AS [Radeon 9550] (Secondary) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 32 bits clock: 66MHz capabilities: pm cap_list configuration: latency=32 mingnt=8 resources: memory:d0000000-dfffffff memory:e5010000-e501ffff" This way more info than the command showed in he other post and as far as I can tell right. This doesn't look to me like a laptop video would list? I also see this command xrandr, it reports this: xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1280 x 1024, maximum 1280 x 1024 default connected 1280x1024+0+0 0mm x 0mm 1280x1024 0.0* 1024x768 0.0 800x600 0.0 640x480 0.0 This is what shows in displays for resolutions but only the 1280x1024 works the others produce tearing in the video. Also I should have mentioned 3D mode does not work. I have tried ATI/AMD drivers the new one won't load and older ones won't work. I found out the newer driver no longer supports the 9550.

  Read the article

• How to Activate wifi in Toshiba Satellite C655?

  - by user4106

  I've recently bought a Toshiba Satellite C655. It came with Windows 7 preinstalled. I've never had a notebook before, but as a desktop user, I was a Ubuntu user since 2 years, and I've never had a problem with drivers, wifi, etc. When I tried to install the Ubuntu 10.04, and also the new and fresh 10.10, in my new laptop, I experienced some troubles with some of the componentes of my computer. For example, I was not able to activate my wi-fi card, although I know the kernel recognizes it correctly, because when doing "lspci" at the terminal, it was listed. Anyhow, I'm not able to "activate" the wifi, or whatever it's necessary to do in order to be able to search for public networks available, and to connect with them. The wifi-card the laptops brings is the (the lspci output): 03:00.0 Network Controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01). It's anything in you can help me? Thanks a lot in advance! Edit Neither solution seems to work. In first place, i've tried installig what hhlp told me. After the installation, nothing seems to change: on right-clicking the wireless icon, it seems to recognize the card, because the option "Enable wifi" was ticked. But, once again, i was not able to "turn the wi-fi" on. In second place, i didn't try installing the drives, because the card is already recongnized. The issue is that i cannot seem to turn it on! One thing i've probably missed is that the Toshiba cames with a windows sofntware that allows you to enable / disable the wifi tools. So, it does not have an external "button" to turn it off. I don't know if that's the problem, but i have the feeling that the issue may be aroud there: in how to turn ON the wifi-signal (or to verify if it's on or off) in my ubuntu.

  Read the article

• recovering raid 0 hard disk

  - by Hiawatha

  I bumped to a huge (for me) problem. I was running dual boot system (win 7 / linux) and at some point I decided to test fedora ( I am new in Linux ). My hard disk conf: 3 hard disks each 1 TB, 2 set to raid 0 with windows running on it and 1 for linux. After installing it from live usb I found out that windows 7 is not in grub anymore and while booting shows raid error. I installed back Ubuntu and ran Disk Utility and checked now I have one disks (raid 0) failed (READ) error. First has 5 bad sectors and second has 1 bad sector. And now I dont know what to do and how to repair. further I dont know which data i could provide to get help. I tried ntfsfix and got this output: Mounting volume... NTFS signature is missing. FAILED Attempting to correct errors... NTFS signature is missing. FAILED Failed to startup volume: Invalid argument NTFS signature is missing. Trying the alternate boot sector Unrecoverable error Volume is corrupt. You should run chkdsk. #sudo ntfs-3g -o force,rw /dev/sdb /media/windows NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

  Read the article

• How to remove a directory which looks corrupted

  - by hap497

  I am using Ubuntu 9.10. When I examine a directory, it shows as '?' for user/ownership. How can I remove it? -rw-r--r-- 1 hap497 hap497 1822 2010-01-28 22:48 IntSizeHash.h d????????? ? ? ? ? ? .libs/ -rw-r--r-- 1 hap497 hap497 194 2010-02-25 12:12 libwebkit_1_0_la-BitmapImage.lo I have tried rm and sudo rm but get an error: $ sudo rm -Rf .libs rm: cannot remove `.libs': Input/output error Thank you for any pointers.

  Read the article

• Bonding and default gateway problem (CentOS)

  - by lg

  I configured network bonding on two machine with centos 5.5. Bonding works well, but the problem is default gateway: it is not configured! I follow this tutorial. I added GATEWAY in both (and either) /etc/sysconfig/network and /etc/sysconfig/network-scripts/ifcfg-bond0. But, when I restart network (or server) there is no default gateway (route command). This is ip route ls output after network restart: 10.0.0.0/16 dev bond0 proto kernel scope link src 10.0.0.88 Where is my mistake?

  Read the article

• BSODs after Windows 8.1 Upgrade

  - by Techrocket9

  I just upgraded my system to Windows 8.1, and I have been getting BSODs that I did not get before the 8.1 upgrade. Though I cannot conclude that running the Android Emulator with Intel's HAXM is the cause, both crashes have occurred while the emulator was running. I get CRITICAL_STRUCTURE_CORRUPTION, the same error as this guy, except I don't have the hardware/software that he has that caused his problem. Minidumps here. Output of verifier.exe /all and then a reboot and then verifier /query: http://sdrv.ms/17CPVu9 Edit: According to software.intel.com/en-us/forums/topic/475129 (can't link due to lack of rep) it is being caused by HAXM. Will close question when I find a solution.

  Read the article

• VMware Player 5.0 or VMware Workstation 9.0 after upgrade to Ubuntu 12.10

  The upgrade process Upgrading Ubuntu 12.04 to latest version 12.10 - aka Quantal Quetzal - is straight forward and you only need to follow the offical upgrade instructions. Short version on the console looks like this: sudo do-release-upgrade This will update the repository entries, and start the upgrade process. After some minutes or hours of download and installation, you have to reboot your system once to get the new kernel loaded. As time of writing, I'm on '3.5.0-17-generic'. And as with any modification of the kernel version, you have to compile the necessary kernel modules to get VMware Player or Workstation up and running. Usually, this happens the first time you try start your VMware software and that's it. Well, again not so this time. Getting the kernel patch Luckily, the community over VMware is very active and you can get a new kernel patch in the online forums here. Get the download and put in a folder have write permissions. Then you extract the archive on the console like so: tar -xjvf vmware9_kernel35_patch.tar.bz2 Then you change into the newly created folder: cd vmware9_kernel3.5_patch/ And you execute the available shell script as root (superuser) like so: sudo ./patch-modules_3.5.0.sh This will stop any running instances of VMware software, patches the source files and runs the compile process for your active environment. This might take some time depending on your machine, and once completed you can start VMware Player or Workstation as previously. In case that you are going to apply the patch again, the script will simply quit with the following output: /usr/lib/vmware/modules/source/.patched found. You have already patched your sources. Exiting You might remove the .patched file in case that you upgraded/changed your kernel and you need to apply the patch again. Disclaimer: The patch is "as-is" and the patcher is originally created by Artem S. Tashkinov, and later modified by An_tony. Please refer to the VMware forum in case of questions or problems. There are also patches available for older versions of VMware Player or Workstation.

  Read the article

• How do I map a friendly name (e.g. www.example.com) to 127.0.0.1:port# on Mac OS X

  - by Fred Finkle

  I am trying to create a demo for a class of mine and I want to configure "fake" domain names on my laptop. A previous question "Can I specify a port in an entry in my /etc/hosts on OS X?" contained an answer indicating that to do it you must use /etc/hosts plus changes to the iptables "If OS X uses iptables you could point xyz.com to some ip in the hosts file like 157.166.226.25 and then: sudo iptables -t nat -A OUTPUT -p tcp --dport 80 -d 157.166.226.25 -j DNAT --to-destination 127.0.0.1:3000 " Since OS X doesn't use iptables, how do I do the equivalent using the tools available on OS X? (the original "asker" seemed to know how to do this, so it wasn't explained). Thanks in advance.

  Read the article

• /etc/environment and cron

  - by clorz

  I've got two machines: Fedora and CentOS. And a cronjob 0-59 * * * * env > /home/me/env.log On CentOS I can see that /etc/environment is affecting the output while on Fedora it does not. I want Fedora to be like CentOS. What do I need to make it happen? /etc/pam.d/crond on Fedora auth sufficient pam_rootok.so auth required pam_env.so auth include system-auth account required pam_access.so account include system-auth session required pam_loginuid.so session include system-auth /etc/pam.d/crond on CentOS auth sufficient pam_env.so auth required pam_rootok.so auth include system-auth account required pam_access.so account include system-auth session required pam_loginuid.so session include system-auth /etc/security/pam_env.conf is the same on both systems and consists of commented out lines. Even if I make /etc/pam.d/cron.d files the same, problem still persists.

  Read the article

• DVI monitor detected only on computer startup

  - by kamil

  I've recently connected a new monitor, LG M2252D-PZ, to a rather outdated computer with Windows XP and Radeon 9600. XP has SP3 installed, video drivers are the latest version back from the times the video card was still supported. My problem is that the monitor works fine only as long as I don't turn it off or switch it to a different input. When I turn it back on, it says "no signal". The key to the problem must be the DVI port, to which the new monitor is connected. The previous monitor was connected to the VGA output, and I've tested that the new one also works fine when connected to the analogue port. Apparently, the computer tests for the presence of a monitor on the DVI port only on startup. The question is, how do I change this?

  Read the article

• Verify linux user passwords

  - by zero_r

  Hi there I got a linux server that has several dozen users. I also have the cleartext password for every user (i know - bad security). I would like to know if the passwords are correct. Since the users are all ftp users and have the nologin shell, I cannot just write a script to check if login works. How can I do a local check on passwords? Script output could look like this: $ check_userpw < user_pw_list.txt user1 ok user2 ok user3 mismatch! user4 ok Thanks

  Read the article

• copy list of video file names to text file along with their runtime?

  - by Adam Johnston

  Copy list of file names to text file? I am linking the above page because of its relevance to my question. Is there anything similar that can be done to output a 'plain' looking text file (or xml or csv file) with basically the same data that the following cmd prompt produces: dir > c:\list.txt However only difference I need is the runtime of any and all video files included in the outputted file. Can this easily be done? Please let me know whether this can be done in the python terminal as well since I am familiar with that was well as Microsoft's dos prompt. Thank you so very much.

  Read the article

• How come I cannot make this file executable (chmod permissions)?

  - by bappi48

  I downloaded Android Development Tool for linux (ADT) and placed it in home directory. After unzipping the files, when I double click the "eclipse" executable file; the eclipse works perfectly fine. But If I unzip the ADT in a different directory, in my case directory E: (is shown when I boot in windows 7) There double clicking the same "eclipse" executable file does not run eclipse. It shows error message: Could not display /media/Software/00.AndroidLinux/ADT/eclipse/eclipse. There is no application installed for executable files. Do you want to search for an application to open this file? If I press yes in the Dialog, it finds "Pypar2" which is not my solution. I found that the "eclipse" file permission is following -rw------- 1 tanvir tanvir 63050 Feb 4 19:05 eclipse I tried to change the permission by "chmod +x eclipse" , but no use. This command does not change the file permission at all in this case. what should I do? Relevant output of cat /proc/mounts: /dev/sda6 /media/Software fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 Please not that I'm new to Ubuntu and still learning day by day.

  Read the article

• ripping interlaced video to 60fps (frames per second)

  - by cloneman

  It would appear that Broadcast Television is often 1080i30 (60 fields/s), and non-movie DVDs (example, instructional or TV shows) are 60fields/s as well, at some lower resolution (480i?) However, almost all video that ends up on the internet, whether in x264-encoded content, Youtube, etc. is 30 frames per second, that is to say , it is progressive scan. However, when you watch content on your TV, I'm guessing the TV converts it to progressive for you, but the end result is a very fluid picture that "feels" quite a bit like 60frames/s. What is the best way to obtain this result when ripping interlaced content sourced from TV or DVDs? Can I rip a DVD that is 60 fields per second to 60 frames per second? I would imagine classic deinterlace filters do not do this, they merge fields and create a 30fps output. I'm using handbrake.

  Read the article

• How to convert a power point pdf to a pdf that is easy to read on kindle?

  - by SpaceTrucker

  I have several power point presentations as pdfs. I would like to read them on the original kindle in landscape format. When I read the original on the kindle then a single slide won't fit on the kindles display. I thought the easiest way to convert the pdf was to repring it with a pdf printer. However I don't know the paper size to use. I already tried using Calibre as suggested by this question. However the output is not usable because of formatting issues. So what paper size should I use for the pdf printer to reprint them in landscape format or are there any other tools I could use for that task?

  Read the article

• Out of nowhere, ssh_exchange_identification: Connection closed by remote host

  - by disusered

  I am running Ubuntu 10.10 on a remote box. I ssh to it everyday without issues but today out of the blue, I get the following error: ssh_exchange_identification: Connection closed by remote host If I connect with -vv, I get the following: OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/bla/.ssh/config debug1: Applying options for ubuntu-server debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ubuntu-server.com [123.123.123.123] port 22. debug1: Connection established. debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /Users/bla/.ssh/id_rsa type -1 debug1: identity file /Users/bla/.ssh/id_rsa-cert type -1 ssh_exchange_identification: Connection closed by remote host If I remove the key, I get the exact same output (sans "debug2: key_type_...). I've managed to log in physically and checked my hosts.allow and hosts.deny but they have no entries. I tried removing and reinstalling OpenSSH, checked authorized_keys and ~/.ssh permissions and tried connecting from other computers only to get the same error. I'm at my wits end, any help would be greatly appreciated.

  Read the article

• Ubuntu cannot see Windows 7 partitions on install

  - by Nash0

  I've been trying to install Ubuntu 10.10 as a dual boot with Windows 7 on my Dell latitude e6510. It is currently running Windows 7 and I have used the MS disk tools to shrink the Win 7 NTFS partition to make room for Linux. The issue I'm having is that when I run Ubuntus installer by booting from CD it sees the entire hard drive as unallocated space. I have also tried Kbuntu 10.10, Fedora 14, booting a Gparted 0.8.0 usb drive, and Ubuntu "install in Windows" with wubi they all have problems. EDIT: When I run the "try Ubuntu" option on booting from cd it can mount my Windows partition and I can view the files. The output of sudo parted -l when running in try Ubuntu mode: Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA ST9500420AS (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Ubuntu stops auto-mounting flash drive

  - by Brian

  It seems that after being up for a few days, my Ubuntu system refuses to auto-mount hot-plugged USB disks (i.e. flash drives). The output from dmesg shows that the kernel recognizes the device correctly. The only solution I'm aware of at the moment is to reboot (logging out may work as well, but the impact is the same since I have a bunch of stuff open and it takes a few minutes to get everything situated after startup/login). I thought gvfs-fuse-daemon was the thing responsible for managing filesystems in userspace, but killing and restarting that doesn't help. Any other ideas?

  Read the article

• Opening ports with IPTables not working - Ubuntu

  - by user41416

  So, I have these rules set in iptables: # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpts:6850:6999 ACCEPT udp -- anywhere anywhere udp dpts:6850:6999 ACCEPT tcp -- anywhere anywhere tcp dpt:6881 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Although, the ports are not open :/ here is a telnet attempt: # telnet localhost 6999 Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused Any idea why this is happening? Do I need to reboot or do someone to make the changes permanent? Last time I rebooted the rules disappeared from iptables :/

  Read the article

• Advice needed on Process - Service Design

  - by user99314

  Need some advice from experts on designing a flow. Create a service that will read a csv file which may contain anywhere over 6000+ rows of individual ids as shown in the sample below. Need to read that file and go to oracle database and fetch a vname,vnumber,vid of each id in the csv and then go to document repository i.e. Oracle UCM and download all documents matching vname,vnumber,vid there can be =0 documents for each vname,vnumber,vid and save them on a file system. UCM exposes a webservice to dowload the documents. Finally create a new csv appending the filenames that are downloaded for each id. Need to keep track of any errors but need to make sure to go over the whole ids in the csv to download the documents and skip in case of errors. Need some advice on how to go about designing this as there may be over 6000+ rows in a csv file and looping it and hitting the database for each individual id and then hitting a UCM may be a bit expensive so open for any idea. How to go by designing this solution. Wondering if messaging can be helpful here or offloading process of getting the vname,vnumber,vid to pl/sql packages, creating staging tables etc. Initial csv that contains ids: **ID** 12345a 12s345 3456fr we9795 we9797 Final csv output: **ID Files Downloaded from UCM** 12345a a.pdf,b.doc,d.txt 12s345 a1.pdf,s2.pdf,f4.gif 3456fr b.xls we9795 we9797 x.doc Thanks

  Read the article

• Why am I getting [mount error(22): Invalid argument] while trying to mount SMB network drive?

  - by Steve_

  Disclaimer: I am very new to Linux :) Anyway, onward: I have a fresh instance of Ubuntu Server (12.04.1 LTS) running on my network and I want to mount a network drive to the server so I can access the contents. The network drive is a SAMBA compatible drive running Darwin OS. If I run the following command: smbclient -L //192.168.0.2 -U myuser It prompts me for the password and then displays output similar to: Domain=[SERVER01] OS=[Darwin] Server=[@(#)PROGRAM:smbd PROJECT:smbx-105.4.0] Sharename Type Comment --------- ---- ------- Comp Staff's Public Folder Disk CompRaid03 Disk Dropbox Disk Groups Disk IPC$ IPC Public Disk Users Disk compstaff Disk However, when I try and mount the CompRaid03 share, using this command: sudo mount -t cifs //192.168.0.2/CompRaid03 /mnt/myshare -o username=myuser I get the same password prompt, but after putting the correct password in, I received this error: mount error(22): Invalid argument dmesg | tail returns: [23576.037373] CIFS VFS: cifs_mount failed w/return code = -22 I don't understand what is wrong with this command. I've managed to mount a share on my current (Windows 8) machine using basically the same command but with a different IP address and share name (obviously). I've spent a good few hours trying to solve this and got no where. Any help or pointers would be greatly appreciated. Thanks Steve EDIT As suggested I've also trued using "user=" instead of "username=": sudo mount -t cifs //192.168.0.2/CompRaid03 /mnt/svnrepo -o user=myuser This results in the same "Invalid argument" error.

  Read the article

• Cherokee high virtual memory usage even after disabling I/O Cache

  - by nidheeshdas

  hi all I've Ubuntu 10.04LTS 64-bit running on a openvz container and Cherokee 1.0.8 compiled from source. The virtual memory usage of cherokee-worker is around 430 MB even after disabling I/O cache from Advanced - I/O Cache - NOT enabled. Is this issue particular to openvz? Because many people reported to have successfully reduced virt memory usage by disabling io cache. htop output: http://imgur.com/z5JEL.jpg (newbies not allowed to post image.) thanks in advance. nidheeshdas

  Read the article

• Graphing per-user CPU usage on a Linux machine

  - by mart1n

  I want to graph (graphical output would be great, i.e. a .png file) the following situation: I have users A, B, and C. I limit their resources so that when all users run a CPU intensive task at the same time, those processes will use 25%, 25%, and 50% of CPU. I know I can get the real-time stats using top but have no idea what to do with them. I've searched through the huge top man page but haven't found much on the subject of outputting data that can be graphed. Ideally, the graph would show a span of maybe 30 seconds. Any ideas how to achieve this?

  Read the article

< Previous Page | 446 447 448 449 450 451 452 453 454 455 456 457  | Next Page >