rajeev y ranjan oracle - Page 450

Halloween: Season for Java Embedded Internet of Spooky Things (IoST) (Part 2)

- by hinkmond

To start out our ghost hunting here at the Oracle Santa Clara campus office, we first need a ghost sensor. It's pretty easy to build one, since all we need to do is to create a circuit that can detect small fluctuations in the electromagnetic field, just like the fluctuations that ghosts cause when they pass by... Naturally, right? So, we build a static charge sensor and will use a Java Embedded app to monitor for changes in the sensor value, running analytics using Java technology on a Raspberry Pi. Bob's your uncle, and there you have it: a ghost sensor. See: Ghost Detector So, go out to Radio Shack and buy up these items: shopping list: 1 - NTE312 JFET N-channel transistor (this is in place of the MPF-102) 1 - Set of Jumper Wires 1 - LED 1 - 300 ohm resistor 1 - set of header pins Then, grab a flashlight, your Raspberry Pi, and come back here for more instructions... Don't be afraid... Yet. Hinkmond

Read the article

eSTEP TechCast - November 2012 Material available

- by Cinzia Mascanzoni

Thanks to those of you who attended our TechCast on "Update on Solaris 11". The materials (presentation, replay) from the TechCast are now available for all of you via our eSTEP portal. You will need to provide your email address and the pin below to access the downloads. Link to the portal is shown below. URL: http://launch.oracle.com/ PIN: eSTEP_2011 The downloads can be found under tab Events --> TechCast. Feel free to explore also the other delivered TechCasts and more useful information under the Download and Links tab. Any feedback is appreciated to help us improve the service and information we deliver.

Read the article

JOB OF THE WEEK

- by Tim Koekkoek

Placement in Contract and Business Practice Services department (50%) - Baden (Switzerland) This placement in the Contract and Business Practice Services department is challenging and diverse and you will support and contribute to the contract teams with the creation and technical archiving of the documents. All duties are in close coordination with the account management and several contracts team, so you will need to have great communication skills both in German and English, great organizational skills and the flexibility to deal with different stakeholders. You will be working in a very international organization and get the possibility to work out your own ideas and develop your skills and your career in one of the biggest Technology companies in the world! If you are interested in this position, read more here!For all of our other vacancies and internships, please visit https://campus.oracle.com.

Read the article

GlassFish Downloads - Where? (reminder)

- by alexismp

Whether you're looking for the open source edition, stable and supported builds, promoted or event nightly builds, they are all in one place on this download page which is linked off of the main glassfish.org welcome page. At the time of this writing (Nov. 2011), the latest stable release is GlassFish 3.1.1 (open source bits, supported Oracle GlassFish Server). The all-in-one Download page also contains links to the developer builds of both 3.1.2 (see plans here) as well as the promoted builds for the 4.0 version (plans) which was used to deliver the keynote "PaaS" demo at the recent JavaOne and Devoxx conferences.

Read the article

There are Cloud Heroes Among Us: download the ebook

- by Javier Puerta

Given the importance of information systems in today's business world, database administrators (DBAs) and other technology professionals often perform heroic deeds for their organizations. While many of these IT pros are too humble to acknowledge their worth, we profiled five real-world IT heroes to demonstrate their value to their organizations-and the industry at large. Many of our heroes are bloggers who share new ideas and developments with their colleagues. Our heroes are creative individuals who can accurately assess a situation and rally their colleagues to address pressing issues. These heroes are authors and known Oracle technology user group leaders. Read their stories today and join them in leading a greater future for the IT industry.

Read the article

New eBook: In-Memory Data Grids for Dummies

- by jeckels

We've just released a new eBook In-Memory Data Grids for Dummies. This is a fantastic resource if you're looking to explain in-memory data grids to colleagues, convince your boss of their value, or even discover some new use cases for your existing investment. In true "Dummies" style, this eBook will walk you through the basics tenets of in-memory data grids, their common use cases, where IMDGs sit in your architecture, and some key considerations when looking to implement them. While the title may say "Dummies," we know you'll find some useful overview and technical information in the resource. It's published by us on the Coherence team in partnership with Wiley (the "Dummies" company), but it's not only about Coherence or Oracle. In fact, we took pains to make this book fairly neutral to give you the best information, not a product pitch. Happy reading! Download the eBook now

Read the article

Coherence on YouTube

- by jeckels

As we're busy preparing the next version of Coherence for you to enjoy, don't forget you can always take a peek at our YouTube channel for customer testimonials, how-to tutorials and a plethora of content around the #1 in-memory solution across conventional and cloud environments. Spoiler alert: we have a bunch more coming very soon. Stay tuned... Also, don't forget to join us at Oracle Open World in September for in-depth sessions on Coherence and other Fusion Middleware products. We look forward to seeing you there!

Read the article

JavaFX 2.2.4 Documentation

- by user12610255

JavaFX 2.2.4 and JDK 7u10 were released on Tuesday. In addition to the release documentation, the following new information is provided: A new document, Using the Image Ops API, describes how to read and write raw pixel data to and from JavaFX images. The Handling JavaFX Events document has been updated with more information on touch events. The Working with Touch Events chapter and Touch Events sample provide information about handling individual touch points to provide sophisticated responses to touch actions. The Implementing Best Practices document has been updated to include information about running tasks on background threads. The Troubleshooting section of Deploying JavaFX Applications now includes a section about disabling the automatic proxy configuration in your application code. Other documents were updated to reflect minor bug fixes. You can download JavaFX 2.2.4 from OTN. For all tutorials and API documentation, see http://docs.oracle.com/javafx.

Read the article

Best JavaOne 2012 Session!

- by Geertjan

Go here to watch a really cool BOF, which was run late at night at some stage during the past week's JavaOne 2012, and which I really enjoyed even though I was falling asleep due to jetlag. (I literally woke up a few times, which means I must have been sleeping.) I loved it even though it was on a topic that doesn't really interest me as such, I just happen to know the speaker. (And I was too tired to stumble back to the hotel for a nap so thought I'd do so while attending a session thereby killing two birds with one stone.) It's really funny and educational. I won't reveal what it is about. http://blueskybd.vo.llnwd.net/o16/oracle/BOF5165_mp4_5165_001.html Guaranteed, if you watch to the end, you'll have a good time and learn a lot. You'll learn WAY more than the narrow confines of the specific topic.

Read the article

GI ????

- by Allen Gao

Normal 0 7.8 ? 0 2 false false false MicrosoftInternetExplorer4 classid="clsid:38481807-CA0E-42D2-BF39-B33AF135CC4D" id=ieooui st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} ??????????11gR2 GI ?????????,??????GI????????????????????? ????????GI???????3???,ohasd??,??????,??????? ??,ohasd??? 1. /etc/inittab?????? h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null ???,??????? root 4865 1 0 Dec02 ? 00:01:01 /bin/sh /etc/init.d/init.ohasd run ??????????????,???? +init.ohasd ????????? + os????????? + ??S* ohasd????, ??S96ohasd + GI????????(crsctl enable crs) ??,ohasd.bin ??????,????OLR????,??,??ohasd.bin??????,?????OLR??????????????OLR???$GRID_HOME/cdata/${HOSTNAME}.olr 2. ohasd.bin????????agents(orarootagent, oraagent, cssdagnet ? cssdmonitor) ???????????????,?????agent??????,??????????$GRID_HOME/bin ???????????,??,?????????,??corruption. ???,??????? 1. Mdnsd ??????(Multicast)???????????????????,??????????????????????????? 2. Gpnpd ????,??????????bootstrap ??,??????????????gpnp profile???,?????mdnsd??????,???????????,?????????????,??gpnp profile (<gi_home>/gpnp/profiles/peer/profile.xml)?????????? 3. Gipcd ????,????????????????(cluster interconnect)?????,???????gpnpd???,??,??????????,?????gpnpd ??????? 4. Ocssd.bin ?????????????gpnp profile?????????(Voting Disk),????gpnpd ??????????,?????????????,??ocssd.bin ??????,?????????? + gpnp profile ?????????? + gpnpd ??????? + ??????asm disk ??????????? + ??????????? 5. ??????????:ora.ctssd, ora.asm, ora.cluster_interconnect.haip, ora.crf, ora.crsd ?? ??:????????????????ocssd.bin, gpnpd.bin ? gipcd.bin ????,??gpnpd.bin????,ocssd.bin ? gipcd.bin ?????????,?gpnpd.bin????????,ocssd.bin ? gipcd.bin ????????gpnp profile?????????? ??,????????????,?????crsd????????? 1. Crsd?????????????OCR,????OCR????ASM?,???? ASM??????,??OCR???ASM??????????OCR???????,???????????????? 2. Crsd ?????agents(orarootagent, oraagent_<rdbms_owner>, oraagent_<gi_owner> )???agent????,??????????$GRID_HOME/bin ???????????,??,?????????,??corruption. 3. ???????? ora.net1.network : ????,?????????????,scanvip, vip, listener?????????????,??????????,vip, scanvip ?listener ??offline,?????????????? ora.<scan_name>.vip:scan???vip??,?????3?? ora.<node_name>.vip : ?????vip ?? ora.<listener_name>.lsnr: ???????????????,?11gR2??,listener.ora???????,????????? ora.LISTENER_SCAN<n>.lsnr: scan ????? ora.<????>.dg: ASM ????????????????mount???,dismount???? ora.<????>.db: ???????11gR2????????????,??????????rac ????????,??????????,???????“USR_ORA_INST_NAME@SERVERNAME(<node name> )”???????,??????????ASM???,???????????????????,??dependency?????????,??????????????????,???dependancy???????,??????(crsctl modify res ……)? ora.<???>.svc:?????????11gR2 ??,?????????,???10gR2??,???????????,srv ?cs ????? ora.cvu :?????11.2.0.2???,???????cluvfy??,???????????????? ora.ons : ONS??,????????,????? ??,?????GI??????????????????? $GRID_HOME/log/<node_name>/ocssd <== ocssd.bin ?? $GRID_HOME/log/<node_name>/gpnpd <== gpnpd.bin ?? $GRID_HOME/log/<node_name>/gipcd <== gipcd.bin ?? $GRID_HOME/log/<node_name>/agent/crsd <== crsd.bin ?? $GRID_HOME/log/<node_name>/agent/ohasd <== ohasd.bin ?? $GRID_HOME/log/<node_name>/mdnsd <== mdnsd.bin ?? $GRID_HOME/log/<node_name>/client <== ????GI ??(ocrdump, crsctl, ocrcheck, gpnptool??)??????????? $GRID_HOME/log/<node_name>/ctssd <== ctssd.bin ?? $GRID_HOME/log/<node_name>/crsd <== crsd.bin ?? $GRID_HOME/log/<node_name>/cvu <== cluvfy ????????? $GRID_HOME/bin/diagcollection.sh <== ????????????????? ??,????????(/var/tmp/.oracle ? /tmp/.oracle),??????????????????ipc???,??,?????????????????????,???GI?????????????????????,??????????GI??????????????

Read the article

Java Magazine????6? / Java Developer Newsletter

- by sasa

??????????????????????9?26??Java Magazine????6??????????? ?6???????????????? ???????????????? ????? BlueJ??????????????????? Web????????????? ADAM BIEN??? HotSpot??? ??????JAVA????????????FORK/JOIN??????? javac??????? JavaFX 2??????????????????????·??????? ????????? ????????????????????????????? Oracle Berkeley DB Java Edition?Java API ConnectionPool.java????????? ?????????????????????????????????????????? ??????Java Developer Newsletter????????????Java????????????????????????????????????????????????????????????????????????????12?31?????????????1,000???Java??????Duke?????????????????????

Read the article

Solaris ????????????????

- by Homma

???? ???????????? CPU ?????????????????????????????????? OS ??????????????????????????????????????????????CPU ??????????????????? CPU ???????????????????????????????????????????????????????????????????????????? CPU ??????????????????????????????????? CPU ???????????????????????? CPU ????????????????????????? CPU ?????????????????????????????????????????????????????????????????????????????DTrace ????????????????? ?? ????????????????????????????????????????????? CPU ????????????????? # cat prog01.c int main() { while(1) {}; } # gcc prog01.c -o prog01 ?????????????????????pbind ?????????? CPU 1 ??????psradm ????????? CPU 1 ?????????????????????????? CPU 1 ?????????????? # ./prog01 & [1] 3247 # pbind -b 1 3247 process id 3247: was not bound, now 1 # psradm -i 1 # psrinfo 1 1 no-intr since 09/24/2012 05:46:25 ????????? Solaris 10 8/11 ????????? # cat /etc/release Oracle Solaris 10 8/11 s10x_u10wos_17b X86 Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. Assembled 23 August 2011 ????????????????????????? DTrace ??????????????(??????)???????????????????????????? preempt ??????????????????? DTrace ????????????????????????????????????????????????????????????????????????????? # dtrace -qn 'BEGIN{ ts = timestamp; } sched:::preempt/pid == $target/ { printf("%d\n",timestamp - ts); ts = timestamp }' -p 3247 ?????????????????????? 200 ????????????????????? # dtrace -qn 'BEGIN{ ts = timestamp; } sched:::preempt/pid == $target/ { printf("%d\n",timestamp - ts); ts = timestamp }' -p 3247 3547836 199976558 200030610 199964001 200001048 199999666 200021432 ???????????? 200 ????? CPU ????????????? CPU ????????????????????? ??????? CPU 1 ????????????? prog01 ?????????????????????????????????? prog01 ?????????????????????????????????????????????????????????? 200 ??????????????? ????????????????????????? ?????????????????????????????? DTrace ????????DTrace ???????????????????????????????????????????????????????????????????? # dtrace -qn 'sched:::preempt/pid == $target/ { printf("%d\n", ((tsproc_t*)curthread->t_cldata)->ts_timeleft); }' -p 3247 ??????????????????????????????? 1/100 ???????? 200 ????????????????? # dtrace -qn 'sched:::preempt/pid == $target/ { printf("%d\n", ((tsproc_t*)curthread->t_cldata)->ts_timeleft); }' -p 3247 20 20 20 20 20 20 ????????? 200 ???????????????????? ???????? 200 ??????????????????????????????????????????????????????????????????????????????? DTrace ???????DTrace ??????????????? # dtrace -qn 'sched:::preempt/pid == $target/ { printf("%d\n", ((tsproc_t*)curthread->t_cldata)->ts_cpupri); }' -p 3247 ???????????????????????????? # dtrace -qn 'sched:::preempt/pid == $target/ { printf("%d\n", ((tsproc_t*)curthread->t_cldata)->ts_cpupri); }' -p 3247 0 0 0 0 0 0 ????????????????? 0 ???????? 0 ?????????????????????? dispadmin ???????????????? # dispadmin -c TS -g | head # Time Sharing Dispatcher Configuration RES=1000 # ts_quantum ts_tqexp ts_slpret ts_maxwait ts_lwait PRIORITY LEVEL 200 0 50 0 50 # 0 200 0 50 0 50 # 1 200 0 50 0 50 # 2 200 0 50 0 50 # 3 200 0 50 0 50 # 4 200 0 50 0 50 # 5 ???????PRIORITY LEVEL 0 ???????? ts_quantum ? 200 ??????????? 0 ???? 200 ???????????????????????????(RES ??? 1000 ????ts_quantum ???? 1/1000 ?)? ????????? ????????????????????? mpstat ????????????????????????????icsw ??? 5 ???????????200 ?????????????????????????????????????????????????????? CPU ??? 200 ????????????? # mpstat 1 | egrep '^ 1|csw' CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 347 196 1 42 1 3 0 0 2 9 1 0 90 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 16 0 0 5 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 7 0 0 5 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 8 0 0 5 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 18 1 0 5 0 0 0 0 100 0 0 0 ???????????? Solaris ????????????????????????????????????????????? priocntl ???????????????? 1 ?????????? # priocntl -s -c FX -t 1000 -i pid `pgrep prog01` ??????? mpstat ?????????CPU ??????? 1 ?????????????????????????????????????????????????????????????????????????????????????????????????????????????? # mpstat 1 | egrep '^ 1|csw' CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 346 196 1 42 1 3 0 0 2 9 1 0 90 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 2 0 0 1 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 2 0 0 1 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 13 0 0 2 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 2 0 0 1 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 5 1 0 1 0 0 0 0 100 0 0 0 ????DTrace ????????????????????????????? # dtrace -qn 'sched:::preempt/pid == $target/ { printf("%d\n", ((fxproc_t*)curthread->t_cldata)->fx_timeleft); }' -p `pgrep prog01` 100 100 100 100 100 100 ??? Solaris ???????????????????????????????????????????????????????????????? 200 ???????????????????????????????????????????????? ??????????????????????????????????????????????????????????????? CPU ?????????I/O ?????????????????????????????????????????????????????????? ?????????????????????????? http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/disp/ ????????? ???????????????????

Read the article

Java Magazine????7???

- by sasa

11?20??Java Magazine????7?????????? ?7???????????????? ?????Java DUKE’S CHOICE AWARDS BlueJ?????????????????????? Web??????????????????????????? Project Lambda??? Java HotSpot VM??????(2):????????????????? NIO.2??????·????API??? Java EE Connector Architecture 1.6 Payment API—JSR 229?? Oracle Berkeley DB Java Edition?Java API(???2) ???????JavaFX????????? Graal??? JavaFX Media API????????? ?????????????????????????????????????????? Java Magazone?????????Java??????????????Java Developer Newsletter???????????????????????????12?31?????????????1,000???Java??????Duke?????????????????????

Read the article

Primavera P6 Cloud ??!P6 R8.3.2????!

- by hhata

????Primavera P6 Enterprise Project Portfolio Management (EPPM) ????? 8.3.2???????????????????????????(SaaS)????????P6????????????????????SaaS???????????????????????P6??????????????????????????·???????????????????????????TCO(Total Cost of Ownership)???????????????OS?????????????????????Primavera?????????P6??????????????????? ??????PPM????????????????????????????? [????] ??????????????????????????????????????????????? [???] TCO????????????PPM????????????????????????????? [??] ?????????????????????????????????????????? [????] HW????????????????P6???????????????????????????? Primavera P6 ????????????????????????: Primavera P6 EPPM Primavera P6 Professional Primavera EPPM Web Services Primavera P6 Team Member Primavera Team Member for iPhone and iPad Primavera P6 Email Statusing Primavera P6 Progress Reporter Document Management BI Publisher WebLogic Application Server P6 Cloud Connect Primavera P6 Professional ????????????????????????????????P6??????????????P6 Cloud Connect???P6??????????????????P6????????????? ???iPad?iPhone???????Team Member?????????????????P6 Cloud??????????????????????????????????P6 Cloud?????Primavera Unifier??????????????????????? P6 Cloud?????????1???????1???????????????????????????????(????)???????????? ????????????Primavera ????????Primavera ????·?????????:??(03-6834-5241/[email protected])?????????????

Read the article

OpenJDK ? Nashorn ?????????

- by Homma

???? Nashorn ? OpenJDK ??????????????????Nashorn ? OpenJDK ????????????????????????????????????????????????????????????????????????????????? ????? ??? jlaskey ??? Nashorn Blog ????????????? https://blogs.oracle.com/nashorn/entry/the_vote_is_in ???????? ?? ?????????????????????????????? Jim Laskey ???????????? Nashorn ??????????? [1] ? ????????? ??: 20 ??: 0 ??: 0 ??????????????????????????????? ????????????????????????????????? -John Coomes [1] http://mail.openjdk.java.net/pipermail/announce/2012-November/000139.html

Read the article

?ERP???????????????????

- by toshiyuki.sakuramoto

???????????????????????????????ERP?????14??? ??6?1???????? ??????100%? ??????2????3??????????????????????????? ????????21:40?????????????????????????22????????????????????????????????????????? ?????????????????????????????????????? ???????????????????????????????????????????????? ???????????????????????? ??????????????????????? ????????!????!? ?????????? ?ERP??????????????????? ?2???????????4???????????????????? ?IFRS?ERP??????ERP?EPM?ERP···????????? ????????????????????? ??? ?ERP??????????????????????? ?Oracle???PR?????????????!? ????????? ????????????????????????????????ERP???????????????????????????????????????????? ????????????????????????????????????????

Read the article

?????????????ERP????????

- by toshiyuki.sakuramoto

????????????????????????????????ERP????? ???????!?????????????? ?????????????????? ?????6??(18:30~20:00)?7??(20:10~21:40)?????&????????? ERP????????????????????????????????????????4?13???????????? ????????? ?1??????????? ?2??ERP?? ?3??????????ERP??? ?4??ERP????????????????? ??? ????14???5???6?? ??·??????????????????????? ? ?????????·????????? ????Oracle??????????ERP?JD Edwars EnterpriseOne?????????????ERP??????????????????? ????????????????????????????? ???8??????????????????

Read the article

???????????!???????

- by Kumiko Fujita

“???????????!”???? “???????????!”????????????·????????????????????????????????????????????????????????????? ???????????????????????????????????????????????! ??????????? ?????????????????????????????????????????????? ??????????????????????????????????????????????/??????????????????????????????????????? ??????????·?????????????????????? ?????????????????????????????????????????????????????????????????DBA????????????????????·??????????????·?????????·???????????????? ???? ????? ????? ???????????????? ???????!?Export/Import??? PDF??(WMV)??(MP4) ????????????? ????????!???????????? PDF??(WMV)??(MP4) ?????? ??!Enterprise Manager:????????????? PDF??(WMV)??(MP4) ???????????? ??!????????????? ???? PDF??(WMV)??(MP4) ?????????????? ???????! ????????????? PDF??(WMV)??(MP4) ???? Oracle???? ?? ???????????????????·??????|???????????

Read the article

????JavaFX??Java???????·?????????????????Java Developer Workshop #2?????|WebLogic Channel|??????

- by ???02

WebLogic Server?????????Java???????????????????WebLogic Channel?????????JavaOne 2011??Java/Java EE????????!――???????????????!!?????????????????????JavaOne 2011????????????????????????????????????JavaFX?????2011?12?1?????????????Java?????????????Java Developer Workshop #2????JavaOne 2011?JavaFX???????????????Oracle Corporation?JavaFX??????Nandini Ramani?(Client Java Group???????????)??????JavaFX 2.0-Next generation Java client solution????????????????????JavaFX?????????????????????(???)?Pure Java???????UI??????JavaFX 2.0??JavaOne 2011??Java/Java EE????????!???????????API????Java????????????1?????????Ramani?????????JavaFX????????JavaFX 2.0??????????????????????　???JavaFX 2.0?????????????????????????????????JavaFX Script??????????????????Java?????????????·???????????????????????Java?????????????????????????????　??????????????PC????????????·??????????????????????????????????????API???????????????????·?????????????????????????????????????????????900????????????Java???????????JavaFX??????????????????????????????·???????(UI)????????????????????(Ramani?)　Ramani??????JavaFX 2.0??????/???????????100% Java API?Swing????FXML???UI????????WebKit???Web????????????????????????????　??????FXML(FX Markup Language)???JavaFX?UI????????XML????????????????Ramani????????????????????????????????·?????????????UI????????????????????????JavaScript?Groovy?Scala???JVM????????????????????????　???JavaFX 2.0????????(JavaFX Runtime)???????????????????????AWT????????????????OS???????????????Glass Windowing Toolkit??2D/3D????????·???????GPU???????????Prism????????????????　?????Prism????????????????·??????????3D?????????????????????????????????????????????·????????60fps??HD??????????VP6?MP3?????????????????????????????????????·??????????????　?????????????????????????JavaFX 2.0???????Ramani???????????????????·????????????·???????????????????????????????JavaFX 2.0?????????????·?????????????????????????????????????Prism???????????????????????????????????????????????????????????????????????JavaFX??????????·??????????????????????????????????????????????/???????????(?????????)????????????????????　??????????????????NetBeans IDE 7.0?????Eclipse?JDeveloper???????IDE?????????????????????????????&??????????????UI???????JavaFX Scene Builder????????　?????JavaFX 2.0???????????·???????????????3D????????????·????????????????????????????????????Ramani????JavaFX Labs????????????JavaFX 2.0????????????????????????????3D???????????????????????????????UI?????????????????????????????????????3D???·?????????????????　???JavaFX 2.0?????????????3D?????????·??????·??????????????????????·?????·?????Kinect?????????????????????·?????????????????????·?????·????Kinect????3D??????????????????????????????　????JavaFX????????????????????????JavaFX????????·?????????Linux?????????PC?iPad????????????????????　?????????2???????????JavaFX??Java??????????????????GUI?????????????????????????????JavaFX??????????????????????Ramani???????????　?JavaFX???????????????????????????????·??????????????????Swing?AWT???????????????·?????????????????????????????????????　???JavaFX???????????·???????OpenJFX?????OpenJDK????????????????????????????UI??????????????????Ramani??????????????????????????????????????????????Java???????????????????JavaFX???????????????????????????????????????????:?Java Developer Workshop #2?????Nandini Ramani?????????????????????

Read the article

???Java (CPU 2013?6??)??????????????

- by OTN-J Master

6?18??Java SE???????????·??????(CPU)2013?6?????????????????Java????????????????????????????????????????????????????????Java?????????????????????????????? ?????? (JDK/Server JRE/JRE) Java SE 7 Update 25??????????????? (JRE)Java Version 7 Update 25?????????????The Oracle Software Security Assurance Blog? ???????????????Java SE Critical Patch Update - June 2013????????? ?????Java SE Critical Patch Update - June 2013????????????Critical Patch Update??????????????????40?????????37??????????????????????????????????Critical Patch Update??????????34?????????????????????????????????????????CVSS???????????10.0?????Critical Patch Update??????4??????????????????????????????????????????????????????CVSS???????7.5??????Critical Patch Update????????????1??Java????????????????????????????????????????????Critical Patch Update??????????1???Javadoc????????????????????????????Javadoc???1.5???????????????????HTML?????????·??????????????????????????????????(CVE-2013-1571???CERT/CC VU#225657)??Javadoc?????Web???????????HTML?????????????????????????????????????????????????????Web???????????????????????????????Web?????????????????????????Web???????????????????????????CVSS???????4.3??????????Critical Patch Update??????Javadoc???????????????????????????????????????Java API Documentation Updater Tool?????????????????????????(??????)HTML??????????????????????????CERT/CC?Web???????????????Critical Patch Update??????????????????????????????????????????????????Critical Patch Update???????????????????????????????????????Java??????????????????????????????????????????????????Java Autoupdate???????Java.com????????????????????????????????????Java SE Critical Patch Update???????????????????????????????????????????Java??????????????????????????????????????????????????????????????Java Critical Patch Update - June 2013???????Javadoc?????????????

Read the article

Diving into OpenStack Network Architecture - Part 2 - Basic Use Cases

- by Ronen Kofman

rkofman Normal rkofman 4 138 2014-06-05T03:38:00Z 2014-06-05T05:04:00Z 3 2735 15596 Oracle Corporation 129 36 18295 12.00 Clean Clean false false false false EN-US X-NONE HE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi; mso-bidi-language:AR-SA;} In the previous post we reviewed several network components including Open vSwitch, Network Namespaces, Linux Bridges and veth pairs. In this post we will take three simple use cases and see how those basic components come together to create a complete SDN solution in OpenStack. With those three use cases we will review almost the entire network setup and see how all the pieces work together. The use cases we will use are: 1. Create network – what happens when we create network and how can we create multiple isolated networks 2. Launch a VM – once we have networks we can launch VMs and connect them to networks. 3. DHCP request from a VM – OpenStack can automatically assign IP addresses to VMs. This is done through local DHCP service controlled by OpenStack Neutron. We will see how this service runs and how does a DHCP request and response look like. In this post we will show connectivity, we will see how packets get from point A to point B. We first focus on how a configured deployment looks like and only later we will discuss how and when the configuration is created. Personally I found it very valuable to see the actual interfaces and how they connect to each other through examples and hands on experiments. After the end game is clear and we know how the connectivity works, in a later post, we will take a step back and explain how Neutron configures the components to be able to provide such connectivity. We are going to get pretty technical shortly and I recommend trying these examples on your own deployment or using the Oracle OpenStack Tech Preview. Understanding these three use cases thoroughly and how to look at them will be very helpful when trying to debug a deployment in case something does not work. Use case #1: Create Network Create network is a simple operation it can be performed from the GUI or command line. When we create a network in OpenStack the network is only available to the tenant who created it or it could be defined as “shared” and then it can be used by all tenants. A network can have multiple subnets but for this demonstration purpose and for simplicity we will assume that each network has exactly one subnet. Creating a network from the command line will look like this: # neutron net-create net1 Created a new network: +---------------------------+--------------------------------------+ | Field | Value | +---------------------------+--------------------------------------+ | admin_state_up | True | | id | 5f833617-6179-4797-b7c0-7d420d84040c | | name | net1 | | provider:network_type | vlan | | provider:physical_network | default | | provider:segmentation_id | 1000 | | shared | False | | status | ACTIVE | | subnets | | | tenant_id | 9796e5145ee546508939cd49ad59d51f | +---------------------------+--------------------------------------+ Creating a subnet for this network will look like this: # neutron subnet-create net1 10.10.10.0/24 Created a new subnet: +------------------+------------------------------------------------+ | Field | Value | +------------------+------------------------------------------------+ | allocation_pools | {"start": "10.10.10.2", "end": "10.10.10.254"} | | cidr | 10.10.10.0/24 | | dns_nameservers | | | enable_dhcp | True | | gateway_ip | 10.10.10.1 | | host_routes | | | id | 2d7a0a58-0674-439a-ad23-d6471aaae9bc | | ip_version | 4 | | name | | | network_id | 5f833617-6179-4797-b7c0-7d420d84040c | | tenant_id | 9796e5145ee546508939cd49ad59d51f | +------------------+------------------------------------------------+ We now have a network and a subnet, on the network topology view this looks like this: Now let’s dive in and see what happened under the hood. Looking at the control node we will discover that a new namespace was created: # ip netns list qdhcp-5f833617-6179-4797-b7c0-7d420d84040c The name of the namespace is qdhcp-<network id> (see above), let’s look into the namespace and see what’s in it: # ip netns exec qdhcp-5f833617-6179-4797-b7c0-7d420d84040c ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 12: tap26c9b807-7c: <BROADCAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether fa:16:3e:1d:5c:81 brd ff:ff:ff:ff:ff:ff inet 10.10.10.3/24 brd 10.10.10.255 scope global tap26c9b807-7c inet6 fe80::f816:3eff:fe1d:5c81/64 scope link valid_lft forever preferred_lft forever We see two interfaces in the namespace, one is the loopback and the other one is an interface called “tap26c9b807-7c”. This interface has the IP address of 10.10.10.3 and it will also serve dhcp requests in a way we will see later. Let’s trace the connectivity of the “tap26c9b807-7c” interface from the namespace. First stop is OVS, we see that the interface connects to bridge “br-int” on OVS: # ovs-vsctl show 8a069c7c-ea05-4375-93e2-b9fc9e4b3ca1 Bridge "br-eth2" Port "br-eth2" Interface "br-eth2" type: internal Port "eth2" Interface "eth2" Port "phy-br-eth2" Interface "phy-br-eth2" Bridge br-ex Port br-ex Interface br-ex type: internal Bridge br-int Port "int-br-eth2" Interface "int-br-eth2" Port "tap26c9b807-7c" tag: 1 Interface "tap26c9b807-7c" type: internal Port br-int Interface br-int type: internal ovs_version: "1.11.0" In the picture above we have a veth pair which has two ends called “int-br-eth2” and "phy-br-eth2", this veth pair is used to connect two bridge in OVS "br-eth2" and "br-int". In the previous post we explained how to check the veth connectivity using the ethtool command. It shows that the two are indeed a pair: # ethtool -S int-br-eth2 NIC statistics: peer_ifindex: 10 . . #ip link . . 10: phy-br-eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 . . Note that “phy-br-eth2” is connected to a bridge called "br-eth2" and one of this bridge's interfaces is the physical link eth2. This means that the network which we have just created has created a namespace which is connected to the physical interface eth2. eth2 is the “VM network” the physical interface where all the virtual machines connect to where all the VMs are connected. About network isolation: OpenStack supports creation of multiple isolated networks and can use several mechanisms to isolate the networks from one another. The isolation mechanism can be VLANs, VxLANs or GRE tunnels, this is configured as part of the initial setup in our deployment we use VLANs. When using VLAN tagging as an isolation mechanism a VLAN tag is allocated by Neutron from a pre-defined VLAN tags pool and assigned to the newly created network. By provisioning VLAN tags to the networks Neutron allows creation of multiple isolated networks on the same physical link. The big difference between this and other platforms is that the user does not have to deal with allocating and managing VLANs to networks. The VLAN allocation and provisioning is handled by Neutron which keeps track of the VLAN tags, and responsible for allocating and reclaiming VLAN tags. In the example above net1 has the VLAN tag 1000, this means that whenever a VM is created and connected to this network the packets from that VM will have to be tagged with VLAN tag 1000 to go on this particular network. This is true for namespace as well, if we would like to connect a namespace to a particular network we have to make sure that the packets to and from the namespace are correctly tagged when they reach the VM network. In the example above we see that the namespace interface “tap26c9b807-7c” has vlan tag 1 assigned to it, if we examine OVS we see that it has flows which modify VLAN tag 1 to VLAN tag 1000 when a packet goes to the VM network on eth2 and vice versa. We can see this using the dump-flows command on OVS for packets going to the VM network we see the modification done on br-eth2: # ovs-ofctl dump-flows br-eth2 NXST_FLOW reply (xid=0x4): cookie=0x0, duration=18669.401s, table=0, n_packets=857, n_bytes=163350, idle_age=25, priority=4,in_port=2,dl_vlan=1 actions=mod_vlan_vid:1000,NORMAL cookie=0x0, duration=165108.226s, table=0, n_packets=14, n_bytes=1000, idle_age=5343, hard_age=65534, priority=2,in_port=2 actions=drop cookie=0x0, duration=165109.813s, table=0, n_packets=1671, n_bytes=213304, idle_age=25, hard_age=65534, priority=1 actions=NORMAL For packets coming from the interface to the namespace we see the following modification: # ovs-ofctl dump-flows br-int NXST_FLOW reply (xid=0x4): cookie=0x0, duration=18690.876s, table=0, n_packets=1610, n_bytes=210752, idle_age=1, priority=3,in_port=1,dl_vlan=1000 actions=mod_vlan_vid:1,NORMAL cookie=0x0, duration=165130.01s, table=0, n_packets=75, n_bytes=3686, idle_age=4212, hard_age=65534, priority=2,in_port=1 actions=drop cookie=0x0, duration=165131.96s, table=0, n_packets=863, n_bytes=160727, idle_age=1, hard_age=65534, priority=1 actions=NORMAL To summarize we can see that when a user creates a network Neutron creates a namespace and this namespace is connected through OVS to the “VM network”. OVS also takes care of tagging the packets from the namespace to the VM network with the correct VLAN tag and knows to modify the VLAN for packets coming from VM network to the namespace. Now let’s see what happens when a VM is launched and how it is connected to the “VM network”. Use case #2: Launch a VM Launching a VM can be done from Horizon or from the command line this is how we do it from Horizon: Attach the network: And Launch Once the virtual machine is up and running we can see the associated IP using the nova list command : # nova list +--------------------------------------+--------------+--------+------------+-------------+-----------------+ | ID | Name | Status | Task State | Power State | Networks | +--------------------------------------+--------------+--------+------------+-------------+-----------------+ | 3707ac87-4f5d-4349-b7ed-3a673f55e5e1 | Oracle Linux | ACTIVE | None | Running | net1=10.10.10.2 | +--------------------------------------+--------------+--------+------------+-------------+-----------------+ The nova list command shows us that the VM is running and that the IP 10.10.10.2 is assigned to this VM. Let’s trace the connectivity from the VM to VM network on eth2 starting with the VM definition file. The configuration files of the VM including the virtual disk(s), in case of ephemeral storage, are stored on the compute node at/var/lib/nova/instances/<instance-id>/. Looking into the VM definition file ,libvirt.xml, we see that the VM is connected to an interface called “tap53903a95-82” which is connected to a Linux bridge called “qbr53903a95-82”: <interface type="bridge"> <mac address="fa:16:3e:fe:c7:87"/> <source bridge="qbr53903a95-82"/> <target dev="tap53903a95-82"/> </interface> Looking at the bridge using the brctl show command we see this: # brctl show bridge name bridge id STP enabled interfaces qbr53903a95-82 8000.7e7f3282b836 no qvb53903a95-82 tap53903a95-82 The bridge has two interfaces, one connected to the VM (“tap53903a95-82 “) and another one ( “qvb53903a95-82”) connected to “br-int” bridge on OVS: # ovs-vsctl show 83c42f80-77e9-46c8-8560-7697d76de51c Bridge "br-eth2" Port "br-eth2" Interface "br-eth2" type: internal Port "eth2" Interface "eth2" Port "phy-br-eth2" Interface "phy-br-eth2" Bridge br-int Port br-int Interface br-int type: internal Port "int-br-eth2" Interface "int-br-eth2" Port "qvo53903a95-82" tag: 3 Interface "qvo53903a95-82" ovs_version: "1.11.0" As we showed earlier “br-int” is connected to “br-eth2” on OVS using the veth pair int-br-eth2,phy-br-eth2 and br-eth2 is connected to the physical interface eth2. The whole flow end to end looks like this: VM è tap53903a95-82 (virtual interface)è qbr53903a95-82 (Linux bridge) è qvb53903a95-82 (interface connected from Linux bridge to OVS bridge br-int) è int-br-eth2 (veth one end) è phy-br-eth2 (veth the other end) è eth2 physical interface. The purpose of the Linux Bridge connecting to the VM is to allow security group enforcement with iptables. Security groups are enforced at the edge point which are the interface of the VM, since iptables nnot be applied to OVS bridges we use Linux bridge to apply them. In the future we hope to see this Linux Bridge going away rules. VLAN tags: As we discussed in the first use case net1 is using VLAN tag 1000, looking at OVS above we see that qvo41f1ebcf-7c is tagged with VLAN tag 3. The modification from VLAN tag 3 to 1000 as we go to the physical network is done by OVS as part of the packet flow of br-eth2 in the same way we showed before. To summarize, when a VM is launched it is connected to the VM network through a chain of elements as described here. During the packet from VM to the network and back the VLAN tag is modified. Use case #3: Serving a DHCP request coming from the virtual machine In the previous use cases we have shown that both the namespace called dhcp-<some id> and the VM end up connecting to the physical interface eth2 on their respective nodes, both will tag their packets with VLAN tag 1000.We saw that the namespace has an interface with IP of 10.10.10.3. Since the VM and the namespace are connected to each other and have interfaces on the same subnet they can ping each other, in this picture we see a ping from the VM which was assigned 10.10.10.2 to the namespace: The fact that they are connected and can ping each other can become very handy when something doesn’t work right and we need to isolate the problem. In such case knowing that we should be able to ping from the VM to the namespace and back can be used to trace the disconnect using tcpdump or other monitoring tools. To serve DHCP requests coming from VMs on the network Neutron uses a Linux tool called “dnsmasq”,this is a lightweight DNS and DHCP service you can read more about it here. If we look at the dnsmasq on the control node with the ps command we see this: dnsmasq --no-hosts --no-resolv --strict-order --bind-interfaces --interface=tap26c9b807-7c --except-interface=lo --pid-file=/var/lib/neutron/dhcp/5f833617-6179-4797-b7c0-7d420d84040c/pid --dhcp-hostsfile=/var/lib/neutron/dhcp/5f833617-6179-4797-b7c0-7d420d84040c/host --dhcp-optsfile=/var/lib/neutron/dhcp/5f833617-6179-4797-b7c0-7d420d84040c/opts --leasefile-ro --dhcp-range=tag0,10.10.10.0,static,120s --dhcp-lease-max=256 --conf-file= --domain=openstacklocal The service connects to the tap interface in the namespace (“--interface=tap26c9b807-7c”), If we look at the hosts file we see this: # cat /var/lib/neutron/dhcp/5f833617-6179-4797-b7c0-7d420d84040c/host fa:16:3e:fe:c7:87,host-10-10-10-2.openstacklocal,10.10.10.2 If you look at the console output above you can see the MAC address fa:16:3e:fe:c7:87 which is the VM MAC. This MAC address is mapped to IP 10.10.10.2 and so when a DHCP request comes with this MAC dnsmasq will return the 10.10.10.2.If we look into the namespace at the time we initiate a DHCP request from the VM (this can be done by simply restarting the network service in the VM) we see the following: # ip netns exec qdhcp-5f833617-6179-4797-b7c0-7d420d84040c tcpdump -n 19:27:12.191280 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from fa:16:3e:fe:c7:87, length 310 19:27:12.191666 IP 10.10.10.3.bootps > 10.10.10.2.bootpc: BOOTP/DHCP, Reply, length 325 To summarize, the DHCP service is handled by dnsmasq which is configured by Neutron to listen to the interface in the DHCP namespace. Neutron also configures dnsmasq with the combination of MAC and IP so when a DHCP request comes along it will receive the assigned IP. Summary In this post we relied on the components described in the previous post and saw how network connectivity is achieved using three simple use cases. These use cases gave a good view of the entire network stack and helped understand how an end to end connection is being made between a VM on a compute node and the DHCP namespace on the control node. One conclusion we can draw from what we saw here is that if we launch a VM and it is able to perform a DHCP request and receive a correct IP then there is reason to believe that the network is working as expected. We saw that a packet has to travel through a long list of components before reaching its destination and if it has done so successfully this means that many components are functioning properly. In the next post we will look at some more sophisticated services Neutron supports and see how they work. We will see that while there are some more components involved for the most part the concepts are the same. @RonenKofman

Read the article

At the Java DEMOgrounds - JavaFX

- by Janice J. Heiss

JavaFX has made rapid progress in the last year, as is evidenced by the wealth of demos on display. A few questions appear to be prominent in the minds of JavaFX enthusiasts. Here are some questions with answers provided by Oracle’s JavaFX team.When will the rest of the JavaFX code be available in open source?Oracle has started to open source JavaFX. The existing platform code will finish being committed to OpenJFX by the end of the year.Why should I use JavaFX instead of HTML5?We see JavaFX as complementary to HTML5, and most companies we talk to react positively once they understand how they can benefit from a hybrid solution. As most HTML5 developers will tell you, the biggest obstacle to deploying HTML5 applications is fragmentation. JavaFX offers a convenient way to render HTML and JavaScript within its WebView component, which provides the same level of quality and features across Windows, Mac, and Linux. Additionally, JavaScript in WebView can make calls into the Java code, and vice versa, allowing developers to tap into the best of both worlds.What is the market penetration of JavaFX? It is currently limited, as we've just made available JavaFX on Mac and Linux in August, but we expect JavaFX to be present on millions of desktop-type systems now that JavaFX is included as part of the JRE. We have also significantly lowered the level of effort required to deploy an application bundling the JRE and JavaFX runtime libraries. Finally, we are seeing a lot of interest by companies operating in the embedded market, who have found it hard to develop compelling UIs with existing technologies.Below are summaries of JavaFX Demos on display at JavaOne 2012:JavaFX EnsembleEnsemble is a collection of over 100 JavaFX samples packaged as a JavaFX application. This demo is especially useful to those new to JavaFX, or those not familiar with its latest features (e.g. canvas, color picker). Ensemble is the reference for getting familiar with JavaFX functionality. Each sample can be run from within Ensemble, and the API for each sample, as well as the source code are available alongside the sample.The samples source code can be saved as a NetBeans project for convenience purposes, or can be copied as is in any other Java IDE. The version of Ensemble shown is packaged as a native Windows application, including the JRE and JavaFX libraries. It was created with the JavaFX packager, which provides multiple packaging options, and frees developers from the cumbersome and error-prone process of packaging a Java application.FX Experience ToolsFX Experience Tools is a JavaFX application that provides different utilities to create new skins for your JavaFX applications. One of the most powerful features of JavaFX is the ability to skin applications via CSS. Since not all Java developers are familiar with CSS, these utilities are a great starting point to create custom skins. JavaFX allows developers to easily customize the look and feel of their applications through CSS. FX Experience Tools makes it easy to create new themes for JavaFX applications, even if you are not familiar with CSS. FX Experience Tools is a JavaFX application packaged as a native application including the JRE and JavaFX runtime libraries. FX Experience tools shows how this type of deployment simplifies the packaging of Java applications without requiring developers to master the intricacies of Java application packaging. The download site for FX Experience Tools is http://fxexperience.com/2012/03/announcing-fx-experience-tools/ JavaFX Scene BuilderJavaFX Scene Builder is a visual layout tool that lets users quickly design the UI of your JavaFX application, without coding. Users can drag and drop UI components, modify their properties, apply style sheets, and the FXML code they create for the layout is automatically generated in the background. The result is an FXML file that can then be combined with a Java project by binding the UI to the application’s logic. Developers can easily create user interfaces for their application, as well as separate the application’s UI from the application logic for easier maintenance. Attendees can get this app by going to javafx.com and checking the link at top of the “Overview” page.Scene Builder allows developers to easily layout JavaFX UI controls, charts, shapes, and containers, so that you can quickly prototype user interfaces. It generates FXML, an XML-based markup language that enables users to define an application’s user interface, separately from the application logic. Scene Builder can be used in combination with any Java IDE, but is more tightly integrated with NetBeans IDE. It is written as a JavaFX application, with native desktop integration on Windows and Mac OS X. It’s a perfect example of a JavaFX application packages as a native application.Scene Builder is available for your preferred development platform. Besides the GA release on Windows and Mac, a Developer Preview of Scene Builder for Linux has just been made available.Scenic ViewScenic View is a tool that can be used to understand the current state of your application UI, and to also easily manipulate properties of the scenegraph without having to keep editing your code. Creating UIs is a complex process, and it can be hard and tedious detecting these issues, editing the code, and then compiling it to test the app again. Scenic View is a great diagnostics tool that helps developers identify these issues and correct them at runtime.Attendees can get Scenic View by going to javafx.com, selecting the “Community” tab, and clicking the link under the “Third Party Tools and Utilities” section.Scenic View allows developers to easily examine the state of a JavaFX application scenegraph while the application is running. Some of the latest features added to Scenic View include event monitoring, javadoc browsing, and contextual menus. The download site for Scenic View is available here: http://fxexperience.com/scenic-view/ Conference TourConference Tour is an application that lets users discover some of the major Java conferences throughout the world. The Conference Tour application shows how simple it is to mix JavaFX and HTML5 into a single, interactive application. Attendees get Conference Tour here.JavaFX includes a Web engine based on Webkit that provides a consistent web interface to render HTML5 across operating systems, within a JavaFX application. JavaFX features a bi-directional bridge that allows Java APIs to call JavaScript within WebView, or allows JavaScript to make calls to Java APIs. This allows developers to leverage the best of both worlds.Java EE developers can take advantage of WebView and the JavaScript-Java bridge to allow their HTML clients to seamlessly bypass Web browser’s sandbox to access native system resources, providing a richer user experience.FXMediaPlayerFXMediaPlayer is an application that lets developers check different media functionality in JavaFX, such as synthesizer or support for HTTP Live Streaming (HLS). This demo shows how developers can embed video content in their Java applications. JavaFX leverages the underlying video (e.g., H.264) and audio (e.g., AAC) codecs on the user’s computer. JavaFX APIs allow developers to interact with the video content (e.g. play/pause, or programmable markers). Some of the latest media features introduced in JavaFX 2.2 include HTTP Live Streaming (HLS). Obviously there is a lot for JavaFX enthusiasts to chew on!

Read the article

What's up with LDoms: Part 4 - Virtual Networking Explained

- by Stefan Hinker

I'm back from my summer break (and some pressing business that kept me away from this), ready to continue with Oracle VM Server for SPARC ;-) In this article, we'll have a closer look at virtual networking. Basic connectivity as we've seen it in the first, simple example, is easy enough. But there are numerous options for the virtual switches and virtual network ports, which we will discuss in more detail now. In this section, we will concentrate on virtual networking - the capabilities of virtual switches and virtual network ports - only. Other options involving hardware assignment or redundancy will be covered in separate sections later on. There are two basic components involved in virtual networking for LDoms: Virtual switches and virtual network devices. The virtual switch should be seen just like a real ethernet switch. It "runs" in the service domain and moves ethernet packets back and forth. A virtual network device is plumbed in the guest domain. It corresponds to a physical network device in the real world. There, you'd be plugging a cable into the network port, and plug the other end of that cable into a switch. In the virtual world, you do the same: You create a virtual network device for your guest and connect it to a virtual switch in a service domain. The result works just like in the physical world, the network device sends and receives ethernet packets, and the switch does all those things ethernet switches tend to do. If you look at the reference manual of Oracle VM Server for SPARC, there are numerous options for virtual switches and network devices. Don't be confused, it's rather straight forward, really. Let's start with the simple case, and work our way to some more sophisticated options later on. In many cases, you'll want to have several guests that communicate with the outside world on the same ethernet segment. In the real world, you'd connect each of these systems to the same ethernet switch. So, let's do the same thing in the virtual world: root@sun # ldm add-vsw net-dev=nxge2 admin-vsw primary root@sun # ldm add-vnet admin-net admin-vsw mars root@sun # ldm add-vnet admin-net admin-vsw venus We've just created a virtual switch called "admin-vsw" and connected it to the physical device nxge2. In the physical world, we'd have powered up our ethernet switch and installed a cable between it and our big enterprise datacenter switch. We then created a virtual network interface for each one of the two guest systems "mars" and "venus" and connected both to that virtual switch. They can now communicate with each other and with any system reachable via nxge2. If primary were running Solaris 10, communication with the guests would not be possible. This is different with Solaris 11, please see the Admin Guide for details. Note that I've given both the vswitch and the vnet devices some sensible names, something I always recommend. Unless told otherwise, the LDoms Manager software will automatically assign MAC addresses to all network elements that need one. It will also make sure that these MAC addresses are unique and reuse MAC addresses to play nice with all those friendly DHCP servers out there. However, if we want to do this manually, we can also do that. (One reason might be firewall rules that work on MAC addresses.) So let's give mars a manually assigned MAC address: root@sun # ldm set-vnet mac-addr=0:14:4f:f9:c4:13 admin-net mars Within the guest, these virtual network devices have their own device driver. In Solaris 10, they'd appear as "vnet0". Solaris 11 would apply it's usual vanity naming scheme. We can configure these interfaces just like any normal interface, give it an IP-address and configure sophisticated routing rules, just like on bare metal. In many cases, using Jumbo Frames helps increase throughput performance. By default, these interfaces will run with the standard ethernet MTU of 1500 bytes. To change this, it is usually sufficient to set the desired MTU for the virtual switch. This will automatically set the same MTU for all vnet devices attached to that switch. Let's change the MTU size of our admin-vsw from the example above: root@sun # ldm set-vsw mtu=9000 admin-vsw primary Note that that you can set the MTU to any value between 1500 and 16000. Of course, whatever you set needs to be supported by the physical network, too. Another very common area of network configuration is VLAN tagging. This can be a little confusing - my advise here is to be very clear on what you want, and perhaps draw a little diagram the first few times. As always, keeping a configuration simple will help avoid errors of all kind. Nevertheless, VLAN tagging is very usefull to consolidate different networks onto one physical cable. And as such, this concept needs to be carried over into the virtual world. Enough of the introduction, here's a little diagram to help in explaining how VLANs work in LDoms: Let's remember that any VLANs not explicitly tagged have the default VLAN ID of 1. In this example, we have a vswitch connected to a physical network that carries untagged traffic (VLAN ID 1) as well as VLANs 11, 22, 33 and 44. There might also be other VLANs on the wire, but the vswitch will ignore all those packets. We also have two vnet devices, one for mars and one for venus. Venus will see traffic from VLANs 33 and 44 only. For VLAN 44, venus will need to configure a tagged interface "vnet44000". For VLAN 33, the vswitch will untag all incoming traffic for venus, so that venus will see this as "normal" or untagged ethernet traffic. This is very useful to simplify guest configuration and also allows venus to perform Jumpstart or AI installations over this network even if the Jumpstart or AI server is connected via VLAN 33. Mars, on the other hand, has full access to untagged traffic from the outside world, and also to VLANs 11,22 and 33, but not 44. On the command line, we'd do this like this: root@sun # ldm add-vsw net-dev=nxge2 pvid=1 vid=11,22,33,44 admin-vsw primary root@sun # ldm add-vnet admin-net pvid=1 vid=11,22,33 admin-vsw mars root@sun # ldm add-vnet admin-net pvid=33 vid=44 admin-vsw venus Finally, I'd like to point to a neat little option that will make your live easier in all those cases where configurations tend to change over the live of a guest system. It's the "id=<somenumber>" option available for both vswitches and vnet devices. Normally, Solaris in the guest would enumerate network devices sequentially. However, it has ways of remembering this initial numbering. This is good in the physical world. In the virtual world, whenever you unbind (aka power off and disassemble) a guest system, remove and/or add network devices and bind the system again, chances are this numbering will change. Configuration confusion will follow suit. To avoid this, nail down the initial numbering by assigning each vnet device it's device-id explicitly: root@sun # ldm add-vnet admin-net id=1 admin-vsw venus Please consult the Admin Guide for details on this, and how to decipher these network ids from Solaris running in the guest. Thanks for reading this far. Links for further reading are essentially only the Admin Guide and Reference Manual and can be found above. I hope this is useful and, as always, I welcome any comments.

Read the article

Complex type support in process flow – XMLTYPE

- by shawn

Before OWB 11.2 release, there are only 5 simple data types supported in process flow: DATE, BOOLEAN, INTEGER, FLOAT and STRING. A new complex data type – XMLTYPE is added in 11.2, in order to support complex data being passed between the process flow activities. In this article we will give a simple example to illustrate the usage of the new type and some related editors. Suppose there is a bookstore that uses XML format orders as shown below (we use the simplest form for the illustration purpose), then we can create a process flow to handle the order, take the order as the input, then extract necessary information, and generate a confirmation email to the customer automatically. <order id=’0001’> <customer> <name>Tom</name> <email>[email protected]</email> </customer> <book id=’Java_001’> <quantity>3</quantity> </book> </order> Considering a simple user case here: we use an input parameter/variable with XMLTYPE to hold the XML content of the order; then we can use an Assign activity to retrieve the email info from the order; after that, we can create an email activity to send the email (Other activities might be added in practical case, but will not be described here). 1) Set XML content value For testing purpose, we will create a variable to hold the sample order, and then this will be used among the process flow activities. When the variable is of XMLTYPE and the “Literal” value is set the true, the advance editor will be enabled. Click the “Advance Editor” shown as above, a simple xml editor will popup. The editor has basic features like syntax highlight and check as shown below: We can also do the basic validation or validation against schema with the editor by selecting the normalized schema. With this, it will be easier to provide the value for XMLTYPE variables. 2) Extract information from XML content After setting the value, we need to extract the email information with the Assign activity. In process flow, an enhanced expression builder is used to help users construct the XPath for extracting values from XML content. When the variable’s literal value is set the false, the advance editor is enabled. Click the button, the advance editor will popup, as shown below: The editor is based on the expression builder (which is often used in mapping etc), an XPath lib panel is appended which provides some help information on how to write the XPath. The expression used here is: “XMLTYPE.EXTRACT(XML_ORDER,'/order/customer/email/text()').getStringVal()”, which uses ‘/order/customer/email/text()’ as the XPath to extract the email info from the XML document. A variable called “EMAIL_ADDR” is created with String data type to hold the value extracted. Then we bind the “VARIABLE” parameter of Assign activity to “EMAIL_ADDR” variable, which means the value of the “EMAIL_ADDR” activity will be set to the result of the “VALUE” parameter of Assign activity. 3) Use the extracted information in Email activity We bind the “TO_ADDRESS” parameter of the email activity to the “EMAIL_ADDR” variable created in above step. We can also extract other information from the xml order directly through the expression, for example, we can set the “MESSAGE_BODY” with value “'Dear '||XMLTYPE.EXTRACT(XML_ORDER,'/order/customer/name/text()').getStringVal()||chr(13)||chr(10)||' You have ordered '||XMLTYPE.EXTRACT(XML_ORDER,'/order/book/quantity/text()').getStringVal()||' '||XMLTYPE.EXTRACT(XML_ORDER,'/order/book/@id').getStringVal()”. This expression will extract the customer name, the quantity and the book id from the order to compose the message body. To make the email activity work, we need provide some other necessary information, Such as “SMTP_SERVER” (which is the SMTP server used to send the emails, like “mail.bookstore.com”. The default PORT number is set to 25. You need to change the value accordingly), “FROM_ADDRESS” and “SUBJECT”. Then the process flow is ready to go. After deploying the process flow package, we can simply run the process flow to check if the result is as expected (An email will be sent to the specified email address with proper subject and message body). Note: In oracle 11g, there is an enhanced security feature - ACL (Access Control List), which restrict the network access within db, so we need to edit the list to allow UTL_SMTP work if you are using oracle 11g. Refer to chapter “Access Control Lists for UTL_TCP/HTTP/SMTP” and “Managing Fine-Grained Access to External Network Services” for more details. In previous releases, XMLTYPE already exists in other OWB objects, like mapping/transformation etc. When the mapping/transformation is dragged into a process flow, the parameters with XMLTYPE are mapped to STRING. Now with the XMLTYPE support in process flow, the XMLTYPE will map to XMLTYPE in a more natural way, and we can leverage the new data type for the design.

Read the article

DTracing a PHPUnit Test: Looking at Functional Programming

- by cj

Here's a quick example of using DTrace Dynamic Tracing to work out what a PHP code base does. I was reading the article Functional Programming in PHP by Patkos Csaba and wondering how efficient this stype of programming is. I thought this would be a good time to fire up DTrace and see what is going on. Since DTrace is "always available" even in production machines (once PHP is compiled with --enable-dtrace), this was easy to do. I have Oracle Linux with the UEK3 kernel and PHP 5.5 with DTrace static probes enabled, as described in DTrace PHP Using Oracle Linux 'playground' Pre-Built Packages I installed the Functional Programming sample code and Sebastian Bergmann's PHPUnit. Although PHPUnit is included in the Functional Programming example, I found it easier to separately download and use its phar file: cd ~/Desktop wget -O master.zip https://github.com/tutsplus/functional-programming-in-php/archive/master.zip wget https://phar.phpunit.de/phpunit.phar unzip master.zip I created a DTrace D script functree.d: #pragma D option quiet self int indent; BEGIN { topfunc = $1; } php$target:::function-entry /copyinstr(arg0) == topfunc/ { self->follow = 1; } php$target:::function-entry /self->follow/ { self->indent += 2; printf("%*s %s%s%s\n", self->indent, "->", arg3?copyinstr(arg3):"", arg4?copyinstr(arg4):"", copyinstr(arg0)); } php$target:::function-return /self->follow/ { printf("%*s %s%s%s\n", self->indent, "<-", arg3?copyinstr(arg3):"", arg4?copyinstr(arg4):"", copyinstr(arg0)); self->indent -= 2; } php$target:::function-return /copyinstr(arg0) == topfunc/ { self->follow = 0; } This prints a PHP script function call tree starting from a given PHP function name. This name is passed as a parameter to DTrace, and assigned to the variable topfunc when the DTrace script starts. With this D script, choose a PHP function that isn't recursive, or modify the script to set self->follow = 0 only when all calls to that function have unwound. From looking at the sample FunSets.php code and its PHPUnit test driver FunSetsTest.php, I settled on one test function to trace: function testUnionContainsAllElements() { ... } I invoked DTrace to trace function calls invoked by this test with # dtrace -s ./functree.d -c 'php phpunit.phar \ /home/cjones/Desktop/functional-programming-in-php-master/FunSets/Tests/FunSetsTest.php' \ '"testUnionContainsAllElements"' The core of this command is a call to PHP to run PHPUnit on the FunSetsTest.php script. Outside that, DTrace is called and the PID of PHP is passed to the D script $target variable so the probes fire just for this invocation of PHP. Note the quoting around the PHP function name passed to DTrace. The parameter must have double quotes included so DTrace knows it is a string. The output is: PHPUnit 3.7.28 by Sebastian Bergmann. ......-> FunSetsTest::testUnionContainsAllElements -> FunSets::singletonSet <- FunSets::singletonSet -> FunSets::singletonSet <- FunSets::singletonSet -> FunSets::union <- FunSets::union -> FunSets::contains -> FunSets::{closure} -> FunSets::contains -> FunSets::{closure} <- FunSets::{closure} <- FunSets::contains <- FunSets::{closure} <- FunSets::contains -> PHPUnit_Framework_Assert::assertTrue -> PHPUnit_Framework_Assert::isTrue <- PHPUnit_Framework_Assert::isTrue -> PHPUnit_Framework_Assert::assertThat -> PHPUnit_Framework_Constraint::count <- PHPUnit_Framework_Constraint::count -> PHPUnit_Framework_Constraint::evaluate -> PHPUnit_Framework_Constraint_IsTrue::matches <- PHPUnit_Framework_Constraint_IsTrue::matches <- PHPUnit_Framework_Constraint::evaluate <- PHPUnit_Framework_Assert::assertThat <- PHPUnit_Framework_Assert::assertTrue -> FunSets::contains -> FunSets::{closure} -> FunSets::contains -> FunSets::{closure} <- FunSets::{closure} <- FunSets::contains -> FunSets::contains -> FunSets::{closure} <- FunSets::{closure} <- FunSets::contains <- FunSets::{closure} <- FunSets::contains -> PHPUnit_Framework_Assert::assertTrue -> PHPUnit_Framework_Assert::isTrue <- PHPUnit_Framework_Assert::isTrue -> PHPUnit_Framework_Assert::assertThat -> PHPUnit_Framework_Constraint::count <- PHPUnit_Framework_Constraint::count -> PHPUnit_Framework_Constraint::evaluate -> PHPUnit_Framework_Constraint_IsTrue::matches <- PHPUnit_Framework_Constraint_IsTrue::matches <- PHPUnit_Framework_Constraint::evaluate <- PHPUnit_Framework_Assert::assertThat <- PHPUnit_Framework_Assert::assertTrue -> FunSets::contains -> FunSets::{closure} -> FunSets::contains -> FunSets::{closure} <- FunSets::{closure} <- FunSets::contains -> FunSets::contains -> FunSets::{closure} <- FunSets::{closure} <- FunSets::contains <- FunSets::{closure} <- FunSets::contains -> PHPUnit_Framework_Assert::assertFalse -> PHPUnit_Framework_Assert::isFalse -> {closure} -> main <- main <- {closure} <- PHPUnit_Framework_Assert::isFalse -> PHPUnit_Framework_Assert::assertThat -> PHPUnit_Framework_Constraint::count <- PHPUnit_Framework_Constraint::count -> PHPUnit_Framework_Constraint::evaluate -> PHPUnit_Framework_Constraint_IsFalse::matches <- PHPUnit_Framework_Constraint_IsFalse::matches <- PHPUnit_Framework_Constraint::evaluate <- PHPUnit_Framework_Assert::assertThat <- PHPUnit_Framework_Assert::assertFalse <- FunSetsTest::testUnionContainsAllElements ... Time: 1.85 seconds, Memory: 3.75Mb OK (9 tests, 23 assertions) The periods correspond to the successful tests before and after (and from) the test I was tracing. You can see the function entry ("->") and return ("<-") points. Cross checking with the testUnionContainsAllElements() source code confirms the two singletonSet() calls, one union() call, two assertTrue() calls and finally an assertFalse() call. These assertions have a contains() call as a parameter, so contains() is called before the PHPUnit assertion functions are run. You can see contains() being called recursively, and how the closures are invoked. If you want to focus on the application logic and suppress the PHPUnit function trace, you could turn off tracing when assertions are being checked by adding D clauses checking the entry and exit of assertFalse() and assertTrue(). But if you want to see all of PHPUnit's code flow, you can modify the functree.d code that sets and unsets self-follow, and instead change it to toggle the variable in request-startup and request-shutdown probes: php$target:::request-startup { self->follow = 1 } php$target:::request-shutdown { self->follow = 0 } Be prepared for a large amount of output!

Search Results

Search found 14467 results on 579 pages for 'rajeev y ranjan oracle'.

Page 450/579 | < Previous Page | 446 447 448 449 450 451 452 453 454 455 456 457 | Next Page >

- by hinkmond

- by Cinzia Mascanzoni

- by Tim Koekkoek

- by alexismp

- by Javier Puerta

- by jeckels

- by jeckels

- by user12610255

- by Geertjan

- by Allen Gao

- by sasa

- by Homma

- by sasa

- by hhata

- by Homma

- by toshiyuki.sakuramoto

- by toshiyuki.sakuramoto

- by Kumiko Fujita

- by ???02

- by OTN-J Master

- by Ronen Kofman

- by Janice J. Heiss

- by Stefan Hinker

- by shawn

- by cj

< Previous Page | 446 447 448 449 450 451 452 453 454 455 456 457 | Next Page >