Search Results

Search found 15665 results on 627 pages for 'inno setup'.

Page 451/627 | < Previous Page | 447 448 449 450 451 452 453 454 455 456 457 458  | Next Page >

• Send raw data to USB parallel port after upgrading to 11.10 oneiric

  - by zaphod

  I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

  Read the article

• Developer career feeling like going back in time every new job [closed]

  - by komediant

  Is there a good category for this question? My background is bachelor in ICT and for a hobby I am programming already since I was around twelve I think. Started with QBasic, Pascal, C, Java et cetera. Currently I am working for about eight/nine years. Half academics/medical and half company world. A few years ago I started with frameworks and I began with Grails (underlying Spring/Hibernate), which was a heavenly job, very productive and no hassle. My previous job I developed in pure Spring/Hibernate Java, which was a bit more writing annotations and XML and no conventions like Grails. But still, I did like Spring/Hibernate a lot and the professional setup with a developmentstreet, versioning, Jenkins/Sonar, log4j and a good IDE like IntellIJ. It felt quite 'clear' and organised, although I knew Grails which felt a bit more productive. But...at my current job almost half the code is pure servlet, hard coded JDBC (connections handled by yourself), scriptlets in all JSP pages, no service layer, no versioning, no Maven, HTML in DAO-layer, JAR-hell, no hot swap deployment locally, every change you have to deploy and hope it works fine on the server. All local development needs ugly scriptlet tags to check which environment it is running. Et cetera. Now and then developers work over in the evening - I don't - and still lots of issues are not solved and new projects are waiting. I hear the developers complaining, but somehow they feel like what they have now is "advanced" or they are in a sort of comfore zone. The lead developer seems open for new things, but half of the times he says he can implement MVC-framework features himself instead of using what is already out there. So in short, I currently feel like I miss all the modern framework techniques and that the company is going so slow forward. I just work here for two months now. What I do now is also code some partially ugly stuff, but it goes in completely into my nature and I feel uncomfortable with it. Coding something takes long(er) than estimated and my manager complains about why it takes so long and I feel ashamed for myself needing so much time. Where I was used to just writing a query I now build up whole try catch methods. My manager knows my complaints and the developers do so too. There will come a meeting to line out plans for 2013 on technology and the issues I and the company are facing. I am not looking for another job yet, it's close to wehre I live and the economy is fragile. Does anyone else have had this kind of career, like feeling going backwards witch technology? And how did you cope with it?

  Read the article

• Raid superblock missing on single parition. Recovery needed!

  - by user171639

  Ok so I have a 2 TB raid 1 setup that has three partitions: sdc1: linux sdc2: swap sdc3: LVM for data However the LVM will no longer mount. So I thought that I would take the first drive, mount it in linux (ive done this b4), and reset the spare drive to copy the data. Normally I can mount a single drive for data recovery using: sudo su apt-get install mdadm lvm2 mdadm --assemble --scan modprobe dm-mod vgscan vgchange -ay c mount -o ro /dev/c/c /mnt Unfortunately, vgscan doesnot recognize the data partition. It appears as though the superblock on the first drive's data partition was erased while syncing with the second. So now I cannot mount that partition and the second drive is stuck in spare mode. Any ideas? Or a way to force mount the data partition just to copy the data? knoppix@Microknoppix:~$ sudo su root@Microknoppix:/home/knoppix# apt-get install mdadm lvm2 Reading package lists... Done Building dependency tree Reading state information... Done lvm2 is already the newest version. mdadm is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 551 not upgraded. root@Microknoppix:/home/knoppix# mdadm --assemble --scan mdadm: /dev/md/1 has been started with 1 drive (out of 2). mdadm: /dev/md/0 has been started with 1 drive (out of 2). root@Microknoppix:/home/knoppix# modprobe dm-mod root@Microknoppix:/home/knoppix# vgscan Reading all physical volumes. This may take a while... No volume groups found root@Microknoppix:/home/knoppix# cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdc1[2] 4193268 blocks super 1.2 [2/1] [U_] md1 : active raid1 sdc2[2] 524276 blocks super 1.2 [2/1] [U_] unused devices: <none> root@Microknoppix:/home/knoppix# mdadm -v --assemble --auto=yes /dev/md2 /dev/sdc3 mdadm: looking for devices for /dev/md2 mdadm: no recogniseable superblock on /dev/sdc3 mdadm: /dev/sdc3 has no superblock - assembly aborted root@Microknoppix:/home/knoppix# dumpe2fs /dev/md0 | grep -i superblock dumpe2fs 1.42.4 (12-Jun-2012) Primary superblock at 0, Group descriptors at 1-1 Backup superblock at 32768, Group descriptors at 32769-32769 Backup superblock at 98304, Group descriptors at 98305-98305 Backup superblock at 163840, Group descriptors at 163841-163841 Backup superblock at 229376, Group descriptors at 229377-229377 Backup superblock at 294912, Group descriptors at 294913-294913 Backup superblock at 819200, Group descriptors at 819201-819201 Backup superblock at 884736, Group descriptors at 884737-884737 root@Microknoppix:/home/knoppix# Notes: I can read the super block from the spare drive. I was gonna try and restore the superblock from one of the backups, but i dont know how or if this would work. I also heard creating a new array (mdadm --create) using the same parameters will not delete the data on the drive but i didnt want to risk it. Recommendations?

  Read the article

• Operation times out trying to SSH outside LAN i.e. from internet to LAN no connection is established

  - by Pelle L

  I run Ubuntu 12.04 and have no success connecting with SSH from "Internet". The router is a TL-MR3420 which is set up to forward requests to one of the NIC's on ubuntu machine (which has in total 3 NICs). I can SSH from a client on the "local" network/LAN. The forward mechanism in the router seems to work. If I stop SSH service on the Ubuntu machine and instead start one on the windows machine - it works like a charm. I do not use the Std port 22 but that shouldn't be an issue as far as I understand - sine it works on the same port on the win machine. Since my public IS isn't static I use a dynDNS service but as said earlier the same setup works from the win machine. The router is located on 192.168.0.1 The Ubuntu NICs has the following IP: eth2 192.168.0.100 , eth1 192.168.0.101 , eth0 192.168.0.102 and I have forwarded the "outside" request to 192.168.0.100 In regards for firewall settings on the Ubuntu machine I have disabled the ufw and the command ufw status give status: inactive. I don't now it this is relevant information but teh command iptables --list give: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have tried to catch traffic with help of wireshark (a tool I'm not too used to use) and it seems as a few (3?) "requests" actually reaches the NIC but ... nothing happens. The syslog does not show any entries during these attempts. Perhaps it could be some routing issues but I have reached my level of competence and are stuck ... all help and support to get this sorted out is much appreciated. I'm new to Linux so please do not assume I have a configuration that is correct - but as I wrote earlier - if the client that initiate SSH is on the LAN it all works. PS:I have also tried to get VPN (PPP) working from Internet with no success - once again VPN works on the windows machine ... so my best guess is that this is related to how the ubuntu machine handles (IP) traffic and not the TL-MR3420 router or other network issues.

  Read the article

• HOW TO: Change Internet Expenses Cost Center Prompt

  - by rveliche

  The cost center segment on the General Information page in Oracle Internet Expenses derives its label from the Prompt entered on the KFF setup. Changing this is not possible with the simple personalization, the details below provide the instructions to change the Prompt. Create a custom class, I call it CustomHeaderKffCO.java in the package oracle.apps.ap.oie.entry.header.webui  (or any other). This class will have to extend from oracle.apps.ap.oie.entry.header.webui.HeaderKffCO. Add the following logic to your custom class. package oracle.apps.ap.oie.entry.header.webui; import oracle.apps.fnd.framework.webui.OAPageContext; import oracle.apps.fnd.framework.webui.beans.OAWebBean; import oracle.apps.fnd.framework.webui.beans.message.OAMessageLayoutBean; import oracle.apps.fnd.framework.webui.OAControllerImpl; public class CustomHeaderKffCO extends HeaderKffCO {   public void processRequest(OAPageContext pageContext, OAWebBean webBean)   {      super.processRequest(pageContext, webBean);     OAMessageLayoutBean layoutBean = (OAMessageLayoutBean) webBean.findChildRecursive("KffSEGMENT2MessageLayout");    if(layoutBean != null)   {     // You should use messages/lookups to avoid translation issues.     layoutBean.setLabel("Cost Center");   }   } } KffSEGMENT2MessageLayout is for illustration only, my Chart Of Accounts has SEGMENT2 as the cost center segment. Please change this to a segment being used eg.Segment6 should be KFFSEGMENT6MessageLayout Note that super.processRequest(pageContext, webBean); is a must and should always be the first statement. Once the class is compiled, copy the class to an appropriate directory, in my case I used $JAVA_TOP/oracle/apps/ap/oie/entry/header/webui. Navigate to the General Information page, click on "Personalize General Information Page".Click on Personalize icon next to Message Component Layout: (OIEGeneralInformationMsgCLayout)In the controller class section update the new controller at the appropriate levelIf the Link "Personalize General Information Page" is not visible on your instance, check your personalization profiles.

  Read the article

• Setting the SlideShowExtender's Index

  - by Bunch

  The AJAX SlideShowExtender is pretty useful. It does what it says and works without much fuss. There was one trick I needed it to perform that I could not find natively within the control. That was to set the slide’s current index. With a little JavaScript however I could make the control do what I wanted. The example below assumes a few things. First you already have a SlideShowExtender setup and working (or see this post). Second this SlideShowExtender is on a page all by itself so the index to set the slide to is passed in the URL. The scenario I had was this SSE was showing full images, the index was passed from another page that had a SSE showing thumbnails. JavaScript in <head> <script type="text/javascript">      function pageLoad() {          var slider = $find("sse");          var photoIndex = GetQuerystring('Index', 0);          slider._currentIndex = photoIndex - 1;          slider._slides = '';          slider.setCurrentImage();      }      function GetQuerystring(key, default_) {          if (default_ == null) default_ = '0';          key = key.replace(/[\[]/, "\\\[").replace(/[\]]/, "\\\]");          var regex = new RegExp("[\\?&]" + key + "=([^&#]*)");          var qs = regex.exec(window.location.href);          if (qs == null)              return default_;          else              return qs[1];      } </script> The GetQuerystring function is what grabs the Index value I pass from the page with the thumbnails. It does not have anything else to do with setting the slide index. The code in the pageLoad function sets the index on the slide_currentIndex line. The slider.setCurrentImage() line does pretty much what it says. I added the slider._slider = ‘’ to avoid an error (not a show stopper just a bit annoying). Control in <body> <cc1:SlideShowExtender ID="ssePhotos" runat="server" TargetControlID="imgFull" AutoPlay="false"          PreviousButtonID="btnPrev" NextButtonID="btnNext" SlideShowServicePath="PlacePhotos.asmx"           SlideShowServiceMethod="GetPlaceFullPhotos" BehaviorID="sse" ImageDescriptionLabelID="lblPictureDescription"> </cc1:SlideShowExtender> The main property to set with the SSE is the BehaviorID. This is what a JavaScript function can use to find the control rather than the control’s ID value. Technorati Tags: AJAX,ASP.Net,JavaScript

  Read the article

• Upgrading to 9.2 - Info You Can Use (part 2 - Get Hands On Experience)

  - by John Webb

  Our guest blogger, Rebekah Jackson, continues with a series of helpful hints on planning your upgrade to PeopleSoft 9.2. Get Hands-On Experience With a an Easy to Install Demo Image Once you have identified the features you believe can add value (see part 1 of this series here), we recommend that you use our Demo Images to quickly create a PeopleSoft environment where you can try out the new features. The Demo Images are virtual machines that run in VirtualBox.   They contain a fully functioning PeopleSoft environment, including the database, PeopleTools, and the application.  These images can be loaded onto nearly any sized machine that meets the specs outlined in the documentation, including a powerful desktop machine.     The image allows you to very quickly deploy a fully functioning PeopleSoft instance that you can use to explore new features and functions or run a conference room pilot. To take advantage these Demo Images: Go to the Demo Images Home Page (Doc id 1552548.1) on My Oracle Support. Use the " Demo Image Quick Start Guide" and additional documentation links on that page to download and install your desired Demo Image. New Demo Images are posted for each product area approximately every 10 weeks, available shortly after the corresponding patching image. When installed, use the Demo Image to explore the desired features and capabilities. Important Notes: - It is not required to use the Demo Images to evaluate features and functions – any 9.2 instance will support this. We recommend use of the Demo Images because the setup and configuration is dramatically faster than doing a traditional PeopleSoft install. - For those looking to explore new features and capabilities on PeopleSoft 9.1 releases, we have provided virtual machine images using the Oracle Virtual Machine technology. Details and links are available in Oracle’s PeopleSoft Virtualization Products page (Doc id 1538142.1). /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

• Ad-hoc reporting similar to Microstrategy/Pentaho - is OLAP really the only choice (is OLAP even sufficient)?

  - by TheBeefMightBeTough

  So I'm getting ready to develop an API in Java that will provide all dimensions, metrics, hierarchies, etc to a user such that they can pick and choose what they want (say, e.g., dimensions of Location (a store) and Weekly, and the metric Product Sales $), provide their choices to the api, and have it spit out an object that contains the answer to their question (the object would probably be a set of cells). I don't even believe there will be much drill up/down. The data warehouse the APIwill interface with is in a standard form (FACT tables, dimensions, star schema format). My question is, is an OLAP framework such as Mondrian the only way to achieve something akin to ad-hoc reporting? I can envisage a really large Cube (or VirtualCube) that contains most of the dimensions and metrics the user could ever want, which would give the illusion of ad-hoc reporting. The problem is that there is a ton of setup to do (so much XML) to get the framework to work with the data. Further it requires specific knowledge, such as MDX, and even moreso learning the framework peculiars (Mondrian API). Finally, I am not positive it will scale much better than simply making queries against a SQL database. OLAP to me feels like very old technology. Is performance really an issue anymore? The alternative I can think of would be dynamic SQL. If the existing tables in the data warehouse conform to a naming scheme (FACT_, DIM_, etc), or if a very simple config file/ database table containing config information existed that stored which tables are fact tables, which are dimensions, and what metrics are available, then couldn't the api read from that and assembly the appropriate sql query? Would this necessarily be harder than learning MDX, Mondrian (or another OLAP framework), and creating all the cubes? In general, I feel that OLAP is at the same time too powerful (supports drill up/down, complex functions) and outdated and am reluctant to base my architecture on it. However, I am unsure if the alternative(s), such as rolling my own ad-hoc reporting framework using dynamic SQL would remove any complexity while still fulfilling requirements, both functional and non-functional (e.g., scalability; some FACT tables have many millions of rows). I also wonder about other techniques (e.g., hive). Has anyone here tried to do ad-hoc reporting? Any advice? I expect this project to take a pretty long time (3 months min, but probably longer), so I just do not want to commit to an architecture without being absolutely sure of its pros and cons. Thanks so much.

  Read the article

• Why is the MaskBit maxed out

  - by CStreel

  Hi there for some reason the maskbit of my b2FixtureDef is being maxxed out and im not sure why Here is the declaration of the items that are used in the game enum PhysicBits { PB_NONE = 0x0000, PB_PLAYER = 0x0001, PB_PLATFORM = 0x0002 }; Basically what i want is the player to run along a surface is not slow down (i set platform & player friction to 0.0f) I then setup my Contact Listener to print out the connections (currently only have 1 platform and 1 player) Player Fixture Def b2FixtureDef fixtureDef; fixtureDef.shape = &groundBox; fixtureDef.density = 1.0f; fixtureDef.friction = 0.0f; fixtureDef.filter.categoryBits = PB_PLAYER; fixtureDef.filter.maskBits = PB_PLATFORM; Platform Fixture Def b2FixtureDef fixtureDef; fixtureDef.shape = &groundBox; fixtureDef.density = 1.0f; fixtureDef.friction = 0.0f; fixtureDef.filter.categoryBits = PB_PLATFORM; fixtureDef.filter.maskBits = PB_PLAYER; Now correct me if im wrong but these are saying the following: Player Collides with Platform Platform Collides with Player Here is the printout of the fixtures colliding with each other ******** <-- Indicates new Contact Platform ContactA: 2 MaskA: 1 ------ Player ContactB: 1 MaskB: 2 ******** <-- Indicates new Contact Platform ContactA: 2 MaskA: 1 ------ Player ContactB: 1 MaskB: 65535 ******** <-- Indicates new Contact Platform ContactA: 1 MaskA: 65535 ------ Player ContactB: 1 MaskB: 65535 Here is where i am confused. On the second & third contact the player maskBit is set to 65535 when it should be 2 and there are 3 contacts when i am sure at most there should only be 2. I've been trying to figure this out for hours and i can't understand why it is doing this. I would be very grateful is someone could shine some light on this for me UPDATE: **I printed out the class of the contacting objects. For some reason it seems to do the following: First Contact: Correct Result. Second Contact: Player b2Fixture Obtains a new maskBit. Third Contact: Platform b2Fixture appears to be set to the same as the Player b2Fixture. It would seem I have a memory race condition i think**

  Read the article

• ODEE Green Field (Windows) Part 2 - WebLogic

  - by AndyL-Oracle

  Welcome back to the next installment on how to install Oracle Documaker Enterprise Edition onto a green field environment! In my previous post, I went over some basic introductory information and we installed the Oracle database. Hopefully you've completed that step successfully, and we're ready to move on - so let's dive in! For this installment, we'll be installing WebLogic 10.3.6, which is a prerequisite for ODEE 12.3 and 12.2. Prior to installing the WebLogic application server, verify that you have met the software prerequisites. Review the documentation – specifically you need to make sure that you have the appropriate JDK installed. There are advisories if you are using JDK 1.7. These instructions assume you are using JDK 1.6, which is available here. The first order of business is to unzip the installation package into a directory location. This procedure should create a single file, wls1036_generic.jar. Navigate to and execute this file by double-clicking it. This should launch the installer. Depending on your User Account Control rights you may need to approve running the setup application. Once the installer application opens, click Next. Select your Middleware Home. This should be within your ORACLE_HOME. The default is probably fine. Click Next. Uncheck the Email option. Click Yes. Click Next. Click Yes Click Yes and Yes again (yes, it’s quite circular). Check that you wish to remain uninformed and click Continue. Click Custom and Next. Uncheck Evaluation Database and Coherence, then click Next. Select the appropriate JDK. This should be a 64-bit JDK if you’re running a 64-bit OS. You may need to browse to locate the appropriate JAVA_HOME location. Check the JDK and click Next. Verify the installation directory and click Next. Click Next. Allow the installation to progress… Uncheck Run Quickstart and click Done.  And that's it! It's all quite painless - so let's proceed on to set up SOA Suite, shall we? 

  Read the article

• Automatically change resolution when not in dock

  - by jwir3

  I have Ubuntu 11.04 (yep, I know it's old news) on my Lenovo W520. At home, I have a dock with dual monitors. I have a pretty decent setup - things work almost perfectly (hence the reason I'm reluctant to upgrade... that and I'm not 100% sold on Unity). Anyway, the only annoyance I have is that when I'm on travel, I use the laptop screen. When I un-dock the laptop, I need to manually go into nvidia x-server settings and change the resolution from 'Auto' to 1920x1200, or it will think I have two screens, and my mouse pointer will be able to go way off the left side of the screen. This isn't a big deal, but I need to do it every time I restart the x-server (so if I reboot, or have to kill it, etc...) What would be really nice is if there was a way for it to automatically detect whether or not there is external monitors (which it seems to do already), and switch into the mode I select, depending on which monitors are connected. Is there any way to accomplish this? I've posted my xorg.conf file for reference. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 275.19 ([email protected]) Tue Jul 12 18:35:38 PDT 2011 #Section "Monitor" # Identifier "Monitor1" # VendorName "Lenovo" # ModelName "ThinkpadLCD" # #HorizSync 28.0 - 33.0 # #VertRefresh 43.0 - 72.0 # #Option "DPMS" #EndSection Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "DELL U2410" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" Option "RegistryDwords" "EnableBrightnessControl=1" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-6: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-5: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +1920+419, DFP-5: nvidia-auto-select +3840+0, DFP-6: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-5: nvidia-auto-select +0+0, DFP-6: 1920x1200 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "NoLogo" "True" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "TwinView" "1" Option "metamodes" "DFP-5: nvidia-auto-select +1920+0, DFP-6: 1920x1200 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• What are the best practices to use NHiberante sessions in asp.net (mvc/web api) ?

  - by mrt181

  I have the following setup in my project: public class WebApiApplication : System.Web.HttpApplication { public static ISessionFactory SessionFactory { get; private set; } public WebApiApplication() { this.BeginRequest += delegate { var session = SessionFactory.OpenSession(); CurrentSessionContext.Bind(session); }; this.EndRequest += delegate { var session = SessionFactory.GetCurrentSession(); if (session == null) { return; } session = CurrentSessionContext.Unbind(SessionFactory); session.Dispose(); }; } protected void Application_Start() { AreaRegistration.RegisterAllAreas(); FilterConfig.RegisterGlobalFilters(GlobalFilters.Filters); RouteConfig.RegisterRoutes(RouteTable.Routes); BundleConfig.RegisterBundles(BundleTable.Bundles); var assembly = Assembly.GetCallingAssembly(); SessionFactory = new NHibernateHelper(assembly, Server.MapPath("/")).SessionFactory; } } public class PositionsController : ApiController { private readonly ISession session; public PositionsController() { this.session = WebApiApplication.SessionFactory.GetCurrentSession(); } public IEnumerable<Position> Get() { var result = this.session.Query<Position>().Cacheable().ToList(); if (!result.Any()) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.NotFound)); } return result; } public HttpResponseMessage Post(PositionDataTransfer dto) { //TODO: Map dto to model IEnumerable<Position> positions = null; using (var transaction = this.session.BeginTransaction()) { this.session.SaveOrUpdate(positions); try { transaction.Commit(); } catch (StaleObjectStateException) { if (transaction != null && transaction.IsActive) { transaction.Rollback(); } } } var response = this.Request.CreateResponse(HttpStatusCode.Created, dto); response.Headers.Location = new Uri(this.Request.RequestUri.AbsoluteUri + "/" + dto.Name); return response; } public void Put(int id, string value) { //TODO: Implement PUT throw new NotImplementedException(); } public void Delete(int id) { //TODO: Implement DELETE throw new NotImplementedException(); } } I am not sure if this is the recommended way to insert the session into the controller. I was thinking about using DI but i am not sure how to inject the session that is opened and binded in the BeginRequest delegate into the Controllers constructor to get this public PositionsController(ISession session) { this.session = session; } Question: What is the recommended way to use NHiberante sessions in asp.net mvc/web api ?

  Read the article

• Why do I have to divide the origin of a quad by 4 instead of 2?

  - by vinzBad

  I'm currently transitioning from C#/XNA to C#/OpenTK but I'm getting stuck at the basics. So I have this Sprite-Class: public static bool EnableDebugDraw = true; public float X; public float Y; public float OriginX = 0; public float OriginY = 0; public float Width = 0.1f; public float Height = 0.1f; public Color TintColor = Color.Red; float _layerDepth = 0f; public void Render() { Vector2[] corners = { new Vector2(X-OriginX,Y-OriginY), //top left new Vector2(X +Width -OriginX,Y-OriginY),//top right new Vector2(X +Width-OriginX,Y+Height-OriginY),//bottom rigth new Vector2(X-OriginX,Y+Height-OriginY)//bottom left }; GL.Color3(TintColor); GL.Begin(BeginMode.Quads); { for (int i = 0; i < 4; i++) GL.Vertex3(corners[i].X,corners[i].Y,_layerDepth); } GL.End(); if (EnableDebugDraw) { GL.Color3(Color.Violet); GL.PointSize(3); GL.Begin(BeginMode.Points); { for (int i = 0; i < 4; i++) GL.Vertex2(corners[i]); } GL.End(); GL.Color3(Color.Green); GL.Begin(BeginMode.Points); GL.Vertex2(X + OriginX, Y + OriginY); GL.End(); } With the following setup I try to set the origin of the quad to the middle of the quad. _sprite.OriginX = _sprite.Width / 2; _sprite.OriginY = _sprite.Height / 2; but this sets the origin to the upper right corner of the quad, so i have to _sprite.OriginX = _sprite.Width / 4; _sprite.OriginY = _sprite.Height / 4; However this is not the intended behaviour, could you advise me how I fix this?

  Read the article

• 12.04 Booting into Terminal

  - by user170796

  To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

  Read the article

• Application stuck in TCP retransmit

  - by SandeepJ

  I am running Linux kernel 3.13 (Ubuntu 14.04) on two Virtual Machines each of which operates inside two different servers running ESXi 5.1. There is a zeromq client-server application running between the two VMs. After running for about 10-30 minutes, this application consistently hangs due to inability to retransmit a lost packet. When I run the same setup over Ubuntu 12.04 (Linux 3.11), the application never fails If you notice below, "ss" (socket statistics) shows 1 packet lost, sk_wmem_queued of 14110 (i.e. w14110) and a high rto (120000). State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 12350 192.168.2.122:41808 192.168.2.172:55550 timer:(on,16sec,10) uid:1000 ino:35042 sk:ffff880035bcb100 <- skmem:(r0,rb648720,t0,tb1164800,f2274,w14110,o0,bl0) ts sack cubic wscale:7,7 rto:120000 rtt:7.5/3 ato:40 mss:8948 cwnd:1 ssthresh:21 send 9.5Mbps unacked:1 retrans:1/10 lost:1 rcv_rtt:1476 rcv_space:37621 Since this has happened so consistently, I was able to capture the TCP log in wireshark. I found that the packet which is lost does get retransmitted and even acknowledged by the TCP in the other OS (the sequence number is seen in the ACK), but the sender doesn't seem to understand this ACK and continues retransmitting. MTU is 9000 on both virtual machines and througout the route. The packets being sent are large in size. As I said earlier, this does not happen on Ubuntu 12.04 (kernel 3.11). So I did a diff on the TCP config options (seen via "sysctl -a |grep tcp ") between 14.04 and 12.04 and found the following differences. I also noticed that net.ipv4.tcp_mtu_probing=0 in both configurations. Left side is 3.11, right side is 3.13 <<net.ipv4.tcp_abc = 0 <<net.ipv4.tcp_cookie_size = 0 <<net.ipv4.tcp_dma_copybreak = 4096 14c11 << net.ipv4.tcp_early_retrans = 2 --- >> net.ipv4.tcp_early_retrans = 3 17c14 << net.ipv4.tcp_fastopen = 0 >> net.ipv4.tcp_fastopen = 1 20d16 << net.ipv4.tcp_frto_response = 0 26,27c22 << net.ipv4.tcp_max_orphans = 16384 << net.ipv4.tcp_max_ssthresh = 0 >> net.ipv4.tcp_max_orphans = 4096 29,30c24,25 << net.ipv4.tcp_max_tw_buckets = 16384 << net.ipv4.tcp_mem = 94377 125837 188754 >> net.ipv4.tcp_max_tw_buckets = 4096 >> net.ipv4.tcp_mem = 23352 31138 46704 34a30 >> net.ipv4.tcp_notsent_lowat = -1 My question to the networking experts on this forum : Are there any other debugging tools or options I can install/enable to dig further into why this TCP retransmit failure is occurring so consistently ? Are there any configuration changes which might account for this weird behaviour.

  Read the article

• How do I render from one render target to another?

  - by Chaotikmind

  I have two render targets: a fake backbuffer; a special render target where I do all my rendering. a light render target; where I render my light fx. I'm sure I'm rendering correctly on both. The problem arises when I overlay the light render target onto the fake backbuffer by drawing a quad covering it: DxEngine.DrawSprite(0.0f, 0.0f, 0.0f, (float)DxEngine.GetWidth(), (float)DxEngine.GetHeight(), 0xFFFFFFFF, LightSurface->GetTexture()); Regardless of what's in the light target, nothing is rendered onto the other target. I tried clearing the light target with full-white or full-black, but still get nothing. Fake backbuffer created with Direct3dDev->CreateTexture(Width, Height, 1, D3DUSAGE_RENDERTARGET, D3DFMT_X8R8G8B8, D3DPOOL_DEFAULT, &Texture, nullptr); Light render target created with Direct3dDev->CreateTexture(Width, Height, 1, D3DUSAGE_RENDERTARGET, D3DFMT_A8R8G8B8, D3DPOOL_DEFAULT, &Texture, nullptr); I also tried to create both with D3DFMT_A8R8G8B8, again without difference. Both targets have the same width and height. Only the fixed pipeline is used DirectX setup for rendering : Direct3dDev->SetSamplerState(0, D3DSAMP_MINFILTER, D3DTEXF_LINEAR ); Direct3dDev->SetSamplerState(0, D3DSAMP_MAGFILTER, D3DTEXF_LINEAR ); Direct3dDev->SetSamplerState(0, D3DSAMP_MIPFILTER, D3DTEXF_NONE ); Direct3dDev->SetSamplerState(0, D3DSAMP_ADDRESSU, D3DTADDRESS_WRAP ); Direct3dDev->SetSamplerState(0, D3DSAMP_ADDRESSV, D3DTADDRESS_WRAP ); Direct3dDev->SetRenderState(D3DRS_CULLMODE, D3DCULL_NONE); Direct3dDev->SetRenderState(D3DRS_LIGHTING, false); Direct3dDev->SetRenderState(D3DRS_ZENABLE, D3DZB_TRUE); Direct3dDev->SetRenderState(D3DRS_ZWRITEENABLE,D3DZB_TRUE); Direct3dDev->SetRenderState(D3DRS_ZFUNC,D3DCMP_LESSEQUAL); Direct3dDev->SetRenderState(D3DRS_ALPHABLENDENABLE, true ); Direct3dDev->SetRenderState(D3DRS_ALPHAREF, 0x00000000ul); Direct3dDev->SetRenderState(D3DRS_ALPHATESTENABLE, true); Direct3dDev->SetRenderState(D3DRS_ALPHAFUNC,D3DCMP_GREATER); Direct3dDev->SetRenderState(D3DRS_SRCBLEND, D3DBLEND_SRCALPHA ); Direct3dDev->SetRenderState(D3DRS_DESTBLEND, D3DBLEND_INVSRCALPHA ); Direct3dDev->SetTextureStageState(0, D3DTSS_COLORARG1, D3DTA_TEXTURE); Direct3dDev->SetTextureStageState(0, D3DTSS_COLORARG2, D3DTA_DIFFUSE); Direct3dDev->SetTextureStageState(0, D3DTSS_COLOROP, D3DTOP_MODULATE); Direct3dDev->SetTextureStageState(0, D3DTSS_ALPHAARG1, D3DTA_TEXTURE); Direct3dDev->SetTextureStageState(0, D3DTSS_ALPHAARG2, D3DTA_DIFFUSE); Direct3dDev->SetTextureStageState(0, D3DTSS_ALPHAOP, D3DTOP_MODULATE); Direct3dDev->SetTextureStageState(0, D3DTSS_RESULTARG, D3DTA_CURRENT); Direct3dDev->SetTextureStageState(0, D3DTSS_TEXCOORDINDEX, D3DTSS_TCI_PASSTHRU); //ensure the first stage is not used for now Direct3dDev->SetTextureStageState(1, D3DTSS_COLOROP, D3DTOP_DISABLE); How can I do this right?

  Read the article

• LWJGL: Camera distance from image plane?

  - by Rogem

  Let me paste some code before I ask the question... public static void createWindow(int[] args) { try { Display.setFullscreen(false); DisplayMode d[] = Display.getAvailableDisplayModes(); for (int i = 0; i < d.length; i++) { if (d[i].getWidth() == args[0] && d[i].getHeight() == args[1] && d[i].getBitsPerPixel() == 32) { displayMode = d[i]; break; } } Display.setDisplayMode(displayMode); Display.create(); } catch (Exception e) { e.printStackTrace(); System.exit(0); } } public static void initGL() { GL11.glEnable(GL11.GL_TEXTURE_2D); GL11.glShadeModel(GL11.GL_SMOOTH); GL11.glClearColor(0.0f, 0.0f, 0.0f, 0.0f); GL11.glClearDepth(1.0); GL11.glEnable(GL11.GL_DEPTH_TEST); GL11.glDepthFunc(GL11.GL_LEQUAL); GL11.glMatrixMode(GL11.GL_PROJECTION); GL11.glLoadIdentity(); GLU.gluPerspective(45.0f, (float) displayMode.getWidth() / (float) displayMode.getHeight(), 0.1f, 100.0f); GL11.glMatrixMode(GL11.GL_MODELVIEW); GL11.glHint(GL11.GL_PERSPECTIVE_CORRECTION_HINT, GL11.GL_NICEST); } So, with the camera and screen setup out of the way, I can now ask the actual question: How do I know what the camera distance is from the image plane? I also would like to know what the angle between the image plane's center normal and a line drawn from the middle of one of the edges to the camera position is. This will be used to consequently draw a vector from the camera's position through the player's click-coordinates to determine the world coordinates they clicked (or could've clicked). Also, when I set the camera coordinates, do I set the coordinates of the camera or do I set the coordinates of the image plane? Thank you for your help. EDIT: So, I managed to solve how to calculate the distance of the camera... Here's the relevant code... private static float getScreenFOV(int dim) { if (dim == 0) { float dist = (float) Math.tan((Math.PI / 2 - Math.toRadians(FOV_Y))/2) * 0.5f; float FOV_X = 2 * (float) Math.atan(getScreenRatio() * 0.5f / dist); return FOV_X; } else if (dim == 1) { return FOV_Y; } return 0; } FOV_Y is the Field of View that one defines in gluPerspective (float fovy in javadoc). This seems to be (and would logically be) for the height of the screen. Now I just need to figure out how to calculate that vector.

  Read the article

• Oracle EBS ????“????”???????

  - by Steve He(???)

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.5pt; mso-bidi-font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:??; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-font-kerning:1.0pt;} Oracle E-Business ?????????????????????,???????????EBS?????????????????“????”,???????????????????????????????? ????????? notes ?????,?????????????????????,?notes??????????????????,????????????? note,????????  ???????????????????????????????,??????????????????????????????,“????”??????????????????????????,???????????????????????????? ?? EBS ????????“????”?????? Doc ID 1501724.1 ???? EBS “????”???? ??????Receivables Transactions?“????”: ??? "Entering / Updating Transactions"????,????????: ????? "Transaction numbers are not in sequence",????????????ID 197212.1: How To Setup Gapless Document Sequencing in Receivables. EBS?????????“????” ?: Advanced Pricing Applications Technology Configurator General Ledger Human Capital Management Inventory Management Order Management Payables Process Manufacturing Purchasing Receivables Shipping Value Chain Planning

  Read the article

• Windows Backup failed with error 0x807800C5

  - by Alexey Ivanov

  I setup backup of my Windows 8 laptop with Windows 7 File Recovery (known as Backup and Restore in Windows 7). Backup of files runs successfully. But if I try to create system image, it fails with error 0x807800C5: Error details on the dialog: The mounted backup volume is inaccessible. Error details in the system log: There was a failure in preparing the backup image of one of the volumes in the backup set. I save the backup to a network location, WD MyBookLive.   Edit: I tried some of the steps suggested in the various thread about this issue: Cleaned up the backup location: Removed MediaID.bin in the backup location. Removed folder <ComputerName> from WindowsImageBackup. Restarted backup resulted in the same error. However, the error dialog shows slightly different error message: The specified backup disk cannot be found. Performed System File Check by running sfc /scannow. It showed no errors. Running backup failed nevertheless. I tried searching Google for error code but I've found no solution so far. Update: I submitted technical support request to Microsoft. The first suggestion was to clean boot, but it didn't help. I pointed out that I had tried all the methods from the same problem on MS Answers, and nothing had helped.

  Read the article

• Windows 2012/IIS 8 + ASP.NET MVC Applicaiton 403.14 (Forbidden) - The Web server is configured to not list the contents

  - by WiredPrairie

  I have a very simple MVC 4 application I'm trying to deploy to a Windows 2012 server. Inconsistently, when navigating to the root of the web application (http://localhost/app), it returns a 403.14-Forbidden: Detailed Error Information: Module: DirectoryListingModule Notification: ExecuteRequestHandler Handler: StaticFile Error Code: 0x00000000 Requested URL: http://localhost:80/test1/ Physical Path: c:\apps\test1\ Logon Method: Negotiate The web application is: Is a very vanilla VS2012 MVC4 Intranet template -- with only a tweak to a label to prove things were working. runs in an Integrated v4.0 application pool setup to use Windows authentication application pool has a custom AD Identity assigned (so it can gain access to a SQL server) application pool identity has read permissions in the c:\apps\test1 folder in which it is running It's an MVC4 application, targeting .NET 4.0 currently -There's no default document in an MVC4 application (like a default.aspx), as there shouldn't need to be one. I don't want to enable directory listings (as that's not the real error). Installed: Roles / Web Server (IIS) / Appliation Development / (.NET 4.5 Extensibility, Application Initialization, ASP.NET 4.5, ISAP Extensions, ISAPI Filters, WebSocket Protocol) Works locally on my machine in IISExpress on Windows 8 Has configured in web.config: <modules runAllManagedModulesForAllRequests="true" /> is set to precompiled during publish When I change the precompiled option to false, the web application does not fail (in my testing at least, it seems to work consistently). The reason I say it's inconsistent is that I've seen it work, then I've published, and the error returns. I can't find a pattern to the issue (and right now, I haven't been able to get it work again, at all). The 403 is returned from a local or remote web browser. I've had trouble finding a solution that isn't intended for older versions of Windows (like suggestions to reinstall ASP.NET which won't work on Windows 2012). I really don't know what else to try.

  Read the article

• Remote Desktop - remote computer that was reached is not the one you specified

  - by Jim McKeeth

  We just setup some new Windows 2008 R2 servers and we are unable to Remote Desktop into them from our Windows 7 desktops. Remote desktop connects, but after we provide credentials we get: The connection cannot be completed because the remote computer that was reached is not the one you specified. This could be caused by an outdated entry in the DNS cache. Try using the IP address of the computer instead of the name. If we connect from Windows 7 to a machine not running Windows 2008 R2, or from a machine not running Windows 7 to the Windows 2008 R2 server, it works fine. Likewise if we connect to the Windows 2008 R2 server from Windows 7 via the IP address then it works fine (although that causes other problems later). I've only found one other mention of someone having this problem, so I don't think it is just our network. Any suggestions on how to connect from Windows 7 to Windows 2008 R2 via DNS? Both are 64-bit. Update: Turns out it does not need to be R2 to get the error. We have another server that is Windows 2008 R1 64-bit that also fails.

  Read the article

• Request Entity Too Large error while uploading files of more than 128KB over SSL

  - by tushar

  We have a web portal setup on Java spring framework. It running on tomcat app server. Portal is served through apache web server connected to tomcat through JK connector. Entire portal is HTTPS enabled using 443 port of apache. Apache version is : Apache/2.4.2 (Unix). it is the latest stable version of apache web server. Whenever we try to upload files more than 128 KB into the portal, We are facing 413 error: Request Entity Too Large The requested resource /teamleadchoachingtracking/doFileUpload does not allow request data with POST requests, or the amount of data provided in the request exceeds the capacity limit. In the apache error log we get the following errors: AH02018: request body exceeds maximum size (131072) for SSL buffer AH02257: could not buffer message body to allow SSL renegotiation to proceed We did search over google and there were suggestions to put SSLRenegBufferSize as some high value like 10MB. Based on these suggestions, we had put the following entry in virtualhost section of httpd config file: SSLRenegBufferSize 10486000 But still the error persists. Also we have specified SSLVerifyClient none, but still renegotiation is happening. This is a very inconsistent and frustrating error. Any help will be highly appreciated. Many thanks in advance.

  Read the article

• RouterOS on Hyper-V (v3/2012) - any way to get it working?

  - by TomTom

  Trying to set up a small VPN point to connect into a remote Hyper-V cluster using ROuterOS. Anyone got it working ON Hyper-V with the latest builds of RouterOS? It seems the legacy network adapter is not supported anymore either (or just broken). The platform is a Windows Server 2012 RC. This is not a high performance setup - the RouterOS wont do the routing for more than the backend administrative access, and the only real traffic we will see there is when ISO images for new operating systems are uploaded. Otherwise we will have possibly RDP traffic as well as web / http traffioc, but this is internal only (dashboards, some control panel). The server has no public business. So the price for non virtualized network cards is ok for me. After hooking up - ping just does not work. After some time I see in windows (arp -a on the command line), so I know that the Hyper-V side is set up properly. Just no packets arrived. I have turned off all protection on Hyper-V (or : not turned them on), so no MAC spoofing protection etc. in the Advanced page for the legacy adapters. Unless I can get it work I will have to resort to using a windows install as router / VPN endpoint, which introduces another OS into the fabric (we run all routers etc. so far on mikrotik in hardware, which is why I want this one to be RouterOS, too). And no, putting hardware there is NOT an option - the cost would be significant.

  Read the article

• Microsoft Standalone CA - Set expiration date of an individual request

  - by Hall72215

  I have set up a Microsoft Standalone CA on 2008 R2 as a root CA. I'm trying to setup a subordinate Enterprise CA. I generated the certificate request, and submitted it to the root CA. Then, I ran the following command to set the expiration date to 20 years (the request ID is 5): certutil -setattributes 5 "ValidityPeriod:Years\nValidityPeriodUnits:20" Then, I approved the request, but it failed. The Request Status Code is: The specified time is invalid. 0x8007076d (WIN32: 1901) The Request Disposition Message is: Denied by Policy Module 0x8007076d, The requested validity period is invalid. Confirm that the validity period or expiration data and time specified in the request does not extend beyond the validity period of the CA certificate, the certificate template, and the CA. The validity period of the CA can be verified by running the following commands: certutil -getreg ca\validityPeriod & certutil -getreg ca\ValidityPeriodUnits The validity period of the CA certificate is 40 years (expires in 2052). The template condition doesn't apply since this is a standalone CA. The result of those commands is Years and 1, respectively. It appears that I will need to change the CA's validityPeriod and validityPeriodUnits. But, I want to keep the default expiration for a request at 1 year. Is there a way to set a maximum and default expiration, or am I going to have to change it, issue the certificate, and then change it back?

  Read the article

• How to disable monitor auto detection in Windows 7?

  - by Jay Yother

  I am currently running Windows 7 Ultimate 64-bit with a dual monitor setup with an NVIDIA 7950 GT graphics card. One monitor is dedicated to this machine and the other monitor is connected to a DVI KVM switch. When I switch to my other computer, Windows 7 disables the monitor. However, when I switch back it does not re-enable the monitor. The only circumstance that automatically re-enables the second monitor is when I switch back after Windows has put the monitors into power save mode. I am continually having to bring up the NVIDIA control panel to have it re-enable the monitor. Under Windows XP I would just disable the NVIDIA service to prevent it from auto-detecting the monitor (which doesn't solve the problem under Win7), and in Vista there was a registry hack that would prevent this. It looks as though that has been removed in Windows 7. I have found similar questions posted on this site, but nothing that matches my problem exactly. The following link is the question that comes the closest, but does not provide a solution to the problem. http://superuser.com/questions/96683/how-to-fix-monitor-detection-on-windows-7 Is there a way in Windows 7 to disable monitor auto-detection?

  Read the article

< Previous Page | 447 448 449 450 451 452 453 454 455 456 457 458  | Next Page >