Search Results

Search found 41071 results on 1643 pages for 'post update'.

Page 452/1643 | < Previous Page | 448 449 450 451 452 453 454 455 456 457 458 459  | Next Page >

  • How do I create a solr core with the data from an existing one?

    - by steve_d
    Solr 1.4 Enterprise Search Server recommends doing large updates on a copy of the core, and then swapping it in for the main core. I am following these steps: Create prep core: http://localhost:8983/solr/admin/cores?action=CREATE&name=prep&instanceDir=main Perform index update, then commit/optimize on prep core. Swap main and prep core: http://localhost:8983/solr/admin/cores?action=SWAP&core=main&other=prep Unload prep core: http://localhost:8983/solr/admin/cores?action=UNLOAD&core=prep The problem I am having is, the core created in step 1 doesn't have any data in it. If I am going to do a full index of everything and the kitchen sink, that would be fine, but if I just want to update a (large) subset of the documents - that's obviously not going to work. (I could merge the cores, but part of what I'm trying to do is get rid of any deleted documents without trying to make a list of them.) Is there some flag to the CREATE action that I'm missing? The Solr Wiki page for CoreAdmin is a little sparse on details.

    Read the article

  • .NET Application using a native DLL (build management)

    - by moogs
    I have a .NET app that is dependent on a native DLL. I have the .NET app set as AnyCPU. In the post-build step, I plan to copy the correct native DLL from some directory (x86 or AMD64) and place it in the target path. However, this doesn't work. On a 64-bit machine, the environment variable PROCESSOR_ARCHITECTURE is "x86" in Visual Studio. My alternative right now is to create a small tool that outputs the processor architecture. This will be used by the post-build step. Is there a better alternative? (Side Note: when deploying/packaging the app, the right native DLL is copied to the right platform. But this means we have two separate release folders for x86 and AMD64, which is OK since this is for a device driver. The app is a utility tool for the driver).

    Read the article

  • iPhone SDK - How is data shared in a universal app

    - by norskben
    Stack overflow I want to make a universal version of my app available, but I am wondering how is data managed between the iPad and the iPhone versions? -Are they completely independent? or if I have a plist in the iPad app, does it also appear in the iPhone app. If so, is there any syncing etc etc. I have a few months experience with single iPad or iPhone apps, but never a universal. Thanks again. UPDATE: I was interested in the files in the /Documents folder, does this automatically update on itunes syncing at all?

    Read the article

  • Wordpress include custom page

    - by Josef
    Hi, I'm sure this is a simple question. But how do I get Wordpress at startup to ignore trying to load a Page or Post and instead load my custom page? When in the Wordpress bootstrap process is it decided which php-page is going to load? I will have the following url: bt.local/wp/ads/1 And would like a php-page called ads.php to be loaded and load the ad with adid = 1. What's the best way to solve this? (there's no Post called ads and there's no Page called Ads). Thank you! KR Josef

    Read the article

  • Using 'git pull' vs 'git checkout -f' for website deployment

    - by Michelle
    I've found two common approaches to automatically deploying website updates using a bare remote repo. The first requires that the repo is cloned into the document root of the webserver and in the post-update hook a git pull is used. cd /srv/www/siteA/ || exit unset GIT_DIR git pull hub master The second approach adds a 'detached work tree' to the bare repository. The post-receive hook uses git checkout -f to replicate the repository's HEAD into the work directory which is the webservers document root i.e. GIT_WORK_TREE=/srv/www/siteA/ git checkout -f The first approach has the advantage that changes made in the websites working directory can be committed and pushed back to the bare repo (however files should not be updated on the live server). The second approach has the advantage that the git directory is not within the document root but this is easily solved using htaccess. Is one method objectively better than the other in terms of best practice? What other advantages and disadvantages am I missing?

    Read the article

  • Tornado Web & Persistent Connections

    - by Engrost
    How can I write Http server in TornadoWeb that will support persistent Connections. I mean will be able to receive many requests and answer to them without closing connection. How does it actually work in async? I just want to know how to write handler to handle persistent connection. How actually would it work? I have handler like that: class MainHandler(RequestHandler): count = 0 @asynchronous def post(self): #get header content type content_type = self.request.headers.get('Content-Type') if not content_type in ACCEPTED_CONTENT: raise HTTPError(403, 'Incorrect content type') text = self.request.body self.count += 1 command = CommandObject(text, self.count, callback = self.async_callback(self.on_response)) command.execute() def on_response(self, response): if response.error: raise HTTPError(500) body = response.body self.write(body) self.flush() execute calls callback when finishes. is my asumption right that with things that way post will be called many times and for one connection count will increase with each httprequest from client? but for each connection I will have separate count value?

    Read the article

  • Separate functionality depending on Role in ASP.NET MVC

    - by Andrew Bullock
    I'm looking for an elegant pattern to solve this problem: I have several user roles in my system, and for many of my controller actions, I need to deal with slightly different data. For example, take /Users/Edit/1 This allows a Moderator to edit a users email address, but Administrators to edit a user's email address and password. I'd like a design for separating the two different bits of action code for the GET and the POST. Solutions I've come up with so far are: Switch inside each method, however this doesn't really help when i want different model arguments on the POST :( Custom controller factory which chooses a UsersController_ForModerators and UsersController_ForAdmins instead of just UsersController from the controller name and current user role Custom action invoker which choose the Edit_ForModerators method in a similar way to above Have an IUsersController and register a different implementation of it in my IoC container as a named instance based on Role Build an implementation of the controller at runtime using Castle DynamicProxy and manipulate the methods to those from role-based implementations Im preferring the named IoC instance route atm as it means all my urls/routing will work seamlessly. Ideas? Suggestions?

    Read the article

  • Getting past Salesforce trigger governors

    - by Jake
    I'm trying to write an "after update" trigger that does a batch update on all child records of the record that has just been updated. This needs to be able to handle 15k+ child records at a time. Unfortunately, the limit appears to be 100, which is so far below my needs it's not even close to acceptable. I haven't tried splitting the records into batches of 100 each, since this will still put me at a cap of 10k updates per trigger execution. (Maybe I could just daisy-chain triggers together? ugh.) Does anyone know what series of hoops I can jump through to overcome yet another ridiculously short-sighted limitation by this awful development "platform"?

    Read the article

  • SingleTap on UIScrollView

    - by ludo
    Hi, I see many post dealing with the UIScrollView like in the PhotoApp, but I don't really understand them, thats why I want to reopen a post about it and have a simple solution. What I want is to create (without IB) a simple UIViewController who will contain a UIScrollView (inside my scrollView there will be image and the scrollView will be set to pagingEnable to YES of course). I want to be able with a simple touch of the screen to display the navigationController.navigationBar inside my UIViewController and with another touch not displaying it of course. Can anyone show me how to implement that? thanks,

    Read the article

  • How to create column width in CSS that expands with large images yet stays a default size for normal

    - by ChrisJF
    I am creating an HTML5 web page with a one column layout. Basically, it is a forum thread with individual posts. I have specified in my CSS file the column to be 600px wide and centered it in the window using margin: 0 auto;. However, some images that are in the individual posts are larger than 600px and spill out of the column. I'd like to widen an individual post to fit the larger images. However, I want all the other posts to still be 600px wide. Right now, I'm just using overflow:auto which will create a scroll bar, but this is less than ideal. Is this possible to have the an individual post width grow for larger content yet stay fixed for normal content? Is this possible using just pure CSS? Thanks in advance!

    Read the article

  • Scraping paginated items from a website using scrapy

    - by Mridang Agarwalla
    I'm using scrapy to scrape items from a site. I'm not being able to implement this scraping pattern. The site I'm trying to scrape is a forum and I scrape the site once a day. Each page has a table containing posts. New posts are added to the top of the table and as more and more posts are posted to the site, the older posts go further into the pages due to pagination. This is a very simple scenario and we will assume that the order of the posts never change. I would like to scrape this site and scrape all the "new" records until the last scraped post from yesterday is encountered. I have configured my spider to paginate endlessly and when it encounters yesterday's last scraped post, it should stop. How can implement this? (My Scrapy installation works with my Django installation using django-dynamic-scraper )

    Read the article

  • Kohana 3 and CRON always accessing index.php (not following the URI argument)

    - by alex
    OK, I hope this is my last question about CRON jobs and Kohana 3. Note: others are not duplicates, just other problems. Here is my CRON job (setup in cPanel) php /home/user/public_html/index.php --uri=properties/update As per this answer. I have set it up so it emails me the output. It is running every 5 mins. Unfortunately, it always emails me the source of the home page of my site (index.php or /). I can access that URL fine in my browser, i.e. http://www.example.com/properties/update and it works and does it's job correctly. I can tell the Cron is never hitting the script because I have a file logger in place. Would this have anything to do with .htaccess? Has this happened to anyone before, and how did they fix it? Many thanks.

    Read the article

  • Managing EntityConnection lifetime

    - by kervin
    There have been many question on managing EntityContext lifetime, e.g. http://stackoverflow.com/questions/813457/instantiating-a-context-in-linq-to-entities I've come to the conclusion that the entity context should be considered a unit-of-work and therefore not reused. Great. But while doing some research for speeding up my database access, I ran into this blog post... Improving Entity Framework Performance The post argues that EFs poor performance compared to other frameworks is often due to the EntityConnection object being created each time a new EntityContext object is needed. To test this I manually created a static EntityConnection in Global.asax.cs Application_Start(). I then converted all my context using statements to using( MyObjContext currContext = new MyObjeContext(globalStaticEFConnection) { .... } This seems to have sped things up a bit without any errors so far as far as I can tell. But is this safe? Does using a applicationwide static EntityConnection introduce race conditions? Best regards, Kervin

    Read the article

  • Database query optimization

    - by hdx
    Ok my Giant friends once again I seek a little space in your shoulders :P Here is the issue, I have a python script that is fixing some database issues but it is taking way too long, the main update statement is this: cursor.execute("UPDATE jiveuser SET username = '%s' WHERE userid = %d" % (newName,userId)) That is getting called about 9500 times with different newName and userid pairs... Any suggestions on how to speed up the process? Maybe somehow a way where I can do all updates with just one query? Any help will be much appreciated! PS: Postgres is the db being used.

    Read the article

  • How do I transfer this logic into a LINQ statement?

    - by Geoffrey
    I can't get this bit of logic converted into a Linq statement and it is driving me nuts. I have a list of items that have a category and a createdondate field. I want to group by the category and only return items that have the max date for their category. So for example, the list contains items with categories 1 and 2. The first day (1/1) I post two items to both categories 1 and 2. The second day (1/2) I post three items to category 1. The list should return the second day postings to category 1 and the first day postings to category 2. Right now I have it grouping by the category then running through a foreach loop to compare each item in the group with the max date of the group, if the date is less than the max date it removes the item. There's got to be a way to take the loop out, but I haven't figured it out!

    Read the article

  • Dynamically removing records when certain columns = 0; data cleansing

    - by cdburgess
    I have a simple card table: CREATE TABLE `users_individual_cards` ( `id` int(11) NOT NULL AUTO_INCREMENT, `user_id` char(36) NOT NULL, `individual_card_id` int(11) NOT NULL, `own` int(10) unsigned NOT NULL, `want` int(10) unsigned NOT NULL, `trade` int(10) unsigned NOT NULL, PRIMARY KEY (`id`), UNIQUE KEY `user_id` (`user_id`,`individual_card_id`), KEY `user_id_2` (`user_id`), KEY `individual_card_id` (`individual_card_id`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=1; I have ajax to add and remove the records based on OWN, WANT, and TRADE. However, if the user removes all of the OWN, WANT, and TRADE cards, they go to zero but it will leave the record in the database. I would prefer to have the record removed. Is checking after each "update" to see if all the columns = 0 the only way to do this? Or can I set a conditional trigger with something like: //psuedo sql AFTER update IF (OWN = 0, WANT = 0, TRADE = 0) DELETE What is the best way to do this? Can you help with the syntax?

    Read the article

  • Pros and Cons of Java HTML to XML cleaners

    - by cjavapro
    I am looking to allow HTML emails (and other HTML uploads) without letting in scripts and stuff. I plan to have a white list of safe tags and attributes as well as a whitelist of CSS tags and value regexes (to prevent automatic return receipt). I asked a question: Parse a badly formatted XML document (like an HTML file) I found there are many many ways to do this. Some systems have built in sanitizers (which I don't care so much about). I will post some answers and say Community Wiki. Please post any other options you like and say Community Wiki so they can be voted on. Also any comments or wiki edits on what part of a certain product is better and what is not would be greatly appreciated. This page is a very nice listing page but I get kinda lost http://java-source.net/open-source/html-parsers

    Read the article

  • Alternate way to create a clone of a UNIX System

    - by Spirit
    THE STORY: (If you don't like to read much, down below is the question :) ) Where I work we have two HP RP2470 servers same hardware same number of hard drives same everything :). One of them is a production server and runs HP-UX 11.00. The poor ba***rd hasn't been turned off for years and now I have to make a clone of it on the other server - just in case, for redundancy. The problem is simple (or not simple) as I have to make the the other server exactly the same. However the old version of OS (UX 11.00 is a history now) and the old software running on it, have made my task almost impossible. On the production server there is also a cloning/recover utility Ignite-UX. I tried many times to create a recovery tape with it. Then when I load the tape on the backup server, it succeeds with the loading of the tape (no errors no warnings) but on the next restart it fails to load the OS :S and drops into HP`s ISL prompt. --- THE QUESTION: Is there an alternate way to create a clone of the Unix System? The environment is: 1. 2x HP RP2470 Servers (non-Intel), same hardware, same number od HDDs (two each of them) same everything. 2. OS running: HP-UX 11.00 The production server has to be cloned without downtime - sadly :( as I hope that they will reconsider on this one For example (like on Windows platforms), if you try to copy an entire HDD with Windows inside on another HDD, and then put that HDD on another PC it will still work, as long as the hardware is the same. Can I do something like that with a Unix system? Can I somehow COPY the contents of the entire HDD, put those on another HDD, and then just load the HDD into the other server? (If you haven't read the story the servers are exactly the same) Will it work? Can it be done with ordinary commands like cp or dump or something like that? Does any one have a similar experience? --- UPDATE: 26.01.2012 NOTE: The update is related to "The Story". If you haven't read that part then you can skip this update. This is just a short update on the recover logs from the Ignite Tape.. someone with more exp. might notice something.. ... --- READING CONTENTS OF THE IGNITE TAPE --- --- OUTPUT OMITED --- ... ... x ./configure3, 413696 bytes, 808 tape blocks x ./monitor_bpr, 20480 bytes, 40 tape blocks * Download_mini-system: Complete * Loading_software: Begin * Installing boot area on disk. * Enabling swap areas. * Backing up LVM configuration for "vg00". * Processing the archive source (Recovery Archive). * Wed Jan 25 15:27:32 EST 2012: Starting archive load of the source (Recovery Archive). * Positioning the tape (/dev/rmt/0mn). * Archive extraction from tape is beginning. Please wait. * Wed Jan 25 15:39:52 EST 2012: Completed archive load of the source (Recovery Archive). * Executing user specified script: "/opt/ignite/data/scripts/os_arch_post_l". * Running in recovery mode (os_arch_post_l). * Running the ioinit command ("/sbin/ioinit -c") * Creating device files via the insf command. insf: Installing special files for sdisk instance 0 address 0/0/1/1.15.0 insf: Installing special files for sdisk instance 1 address 0/0/2/0.1.0 insf: Installing special files for sdisk instance 2 address 0/0/2/1.15.0 insf: Installing special files for stape instance 0 address 0/0/1/0.3.0 insf: Installing special files for btlan instance 0 address 0/0/0/0 insf: Installing special files for btlan instance 1 address 0/2/0/0 insf: Installing special files for pseudo driver dlpi insf: Installing special files for pseudo driver kepd insf: Installing special files for pseudo driver framebuf insf: Installing special files for pseudo driver sad * Running "/opt/upgrade/bin/tlinstall -v" and correcting transition link permissions. * Constructing the bootconf file. * Setting primary boot path to "0/0/1/1.15.0". * Executing: "/var/adm/sw/products/PHSS_20146/pfiles/iux_postload". * Executing: "/var/adm/sw/products/PHSS_25982/pfiles/iux_postload". NOTE: tlinstall is searching filesystem - please be patient NOTE: Successfully completed * Loading_software: Complete * Build_Kernel: Begin NOTE: Since the /stand/vmunix kernel is already in place, the kernel will not be re-built. Note that no mod_kernel directives will be processed. * Build_Kernel: Complete * Boot_From_Client_Disk: Begin * Rebooting machine as expected. NOTE: Rebooting system. sync'ing disks (0 buffers to flush): 0 buffers not flushed 0 buffers still dirty Closing open logical volumes... Done Console reset done. Boot device reset done. ********** VIRTUAL FRONT PANEL ********** System Boot detected ***************************************** LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH OFF OFF ON ON LED State: Running non-OS code. (i.e. Boot or Diagnostics) ... ... ... --- SERVER IS PERFORMING POST SEQUENCE HERE --- --- OUTPUT OMITED --- ... ... ... ***************************************** ************ EARLY BOOT VFP ************* End of early boot detected ***************************************** Firmware Version 43.50 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 650 MHz Active Functional 750 KB 1.5 MB 1 650 MHz Idle Functional 750 KB 1.5 MB Central Bus Speed (in MHz) : 120 Available Memory : 2097152 KB Good Memory Required : 16140 KB Primary boot path: 0/0/1/1.15 Alternate boot path: 0/0/2/1.15 Console path: 0/0/4/1.643 Keyboard path: 0/0/4/0.0 Processor is starting autoboot process. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Trying Primary Boot Path ------------------------ Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. ISL Revision A.00.38 OCT 26, 1994 ISL booting hpux ISL>

    Read the article

  • php paypal ipn membership error

    - by aleksander haugas
    hello I integrated the membership subscription in the website, but I fail to insert data to the database. checking out all the function I make a txt file with php with data and generates me correctly. but I can not verify any data and less insert. <?php // read the post from PayPal system and add 'cmd' $req = 'cmd=_notify-validate'; foreach ($_POST as $key => $value) { $value = urlencode(stripslashes($value)); $req .= "&$key=$value"; } // Post back to PayPal system to validate $header .= "POST /cgi-bin/webscr HTTP/1.0\r\n"; $header .= "Content-Type: application/x-www-form-urlencoded\r\n"; $header .= "Content-Length: " . strlen($req) . "\r\n\r\n"; $fp = fsockopen ('ssl://www.paypal.com', 443, $errno, $errstr, 30); // Assign posted variables to local variables $item_name = $_POST['item_name']; $item_number = $_POST['item_number']; $payment_status = $_POST['payment_status']; $payment_amount = $_POST['mc_gross']; $payment_currency = $_POST['mc_currency']; $txn_id = $_POST['txn_id']; $receiver_email = $_POST['receiver_email']; $payer_email = $_POST['payer_email']; $user_id = $_POST['custom']; //Here i make the txt file and it works correctly //but after this does not work or make a txt file //Insert and update data if (!$fp) { // HTTP ERROR } else { fputs ($fp, $header . $req); while (!feof($fp)) { $res = fgets ($fp, 1024); if (strcmp ($res, "VERIFIED") == 0) { //Verificamos el estado del pedido if ($payment_status == 'Completed') { $txn_id_check = mysql_query("SELECT Transaction_ID FROM ".$db_table_prefix."Users_Payments WHERE Transaction_ID='".$txn_id."'"); if (mysql_num_rows($txn_id_check) !=1) { //Si el pago se ha realizado al dueño especificado y coincide con el dueño if ($receiver_email == $website_Payment_Email) { //Tipo de cuenta segun pagado if ($payment_amount == '10.00' && $payment_currency == 'EUR') { //add txn_id to database $log_query = mysql_query("INSERT INTO `".$db_table_prefix."Users_Payments` VALUES ('','".$txn_id."','".$payer_email."')"); //update premium to 3 $update_premium = mysql_query("UPDATE ".$db_table_prefix."Users SET Group_ID='3' WHERE User_ID='".$user_id."'"); } } } } } else if (strcmp ($res, "INVALID") == 0) { // log for manual investigation } } fclose ($fp); } ?> I call this file with require_once () with the connection to the database any ideas? thanks

    Read the article

  • Updating Excel Cell with Non-Numeric Data in C#

    - by kbo206
    I have a query that is ExcelQuery = "Update [Sheet1$] set CITIZEN_ID = #" + value + " where CITIZEN_ID = " + value; As you can see, I'm essentially just appending a "#" onto the CITIZEN_ID field. value is a int/numeric value. So if I had "256" in the CITIZEN_ID column it would be converted to "#256" When I execute this I get an OleDbException Syntax error in date in query expression so I surrounded part of the query in single quotes like this, ExcelQuery = "Update [Sheet1$] set CITIZEN_ID = '#" + value + "' where CITIZEN_ID = " + value; With that I get yet another OleDbException this time with, Data type mismatch in criteria expression. I'm guessing for some reason the CITIZEN_ID fields don't want to take anything besides a plain number. Is there any way I can remedy this to get that pound symbol in? Thanks!

    Read the article

  • MVC3/Razor Client Validation Not firing

    - by Jason Gerstorff
    I am trying to get client validation working in MVC3 using data annotations. I have looked at similar posts including this MVC3 Client side validation not working for the answer. I'm using an EF data model. I created a partial class like this for my validations. [MetadataType(typeof(Post_Validation))] public partial class Post { } public class Post_Validation { [Required(ErrorMessage = "Title is required")] [StringLength(5, ErrorMessage = "Title may not be longer than 5 characters")] public string Title { get; set; } [Required(ErrorMessage = "Text is required")] [DataType(DataType.MultilineText)] public string Text { get; set; } [Required(ErrorMessage = "Publish Date is required")] [DataType(DataType.DateTime)] public DateTime PublishDate { get; set; } } My cshtml page includes the following. <h2>Create</h2> <script src="@Url.Content("~/Scripts/jquery.validate.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.validate.unobtrusive.min.js")" type="text/javascript"></script> @using (Html.BeginForm()) { @Html.ValidationSummary(true) Post <div class="editor-label"> @Html.LabelFor(model => model.Title) </div> <div class="editor-field"> @Html.EditorFor(model => model.Title) @Html.ValidationMessageFor(model => model.Title) </div> <div class="editor-label"> @Html.LabelFor(model => model.Text) </div> <div class="editor-field"> @Html.EditorFor(model => model.Text) @Html.ValidationMessageFor(model => model.Text) Web Config: <appSettings> <add key="ClientValidationEnabled" value="true" /> <add key="UnobtrusiveJavaScriptEnabled" value="true" /> Layout: <head> <title>@ViewBag.Title</title> <link href="@Url.Content("~/Content/Site.css")" rel="stylesheet" type="text/css" /> <script src="@Url.Content("~/Scripts/jquery-1.4.4.min.js")" type="text/javascript"></script> So, the Multiline Text annotation works and creates a text area. But none of the validations work client side. I don't know what i might be missing. Any ideas?? i can post more information if needed. Thanks!

    Read the article

  • MySQL query killing my server

    - by Webnet
    Looking at this query there's got to be something bogging it down that I'm not noticing. I ran it for 7 minutes and it only updated 2 rows. //set product count for makes $tru->query->run(array( 'name' => 'get-make-list', 'sql' => 'SELECT id, name FROM vehicle_make', 'connection' => 'core' )); while($tempMake = $tru->query->getArray('get-make-list')) { $tru->query->run(array( 'name' => 'update-product-count', 'sql' => 'UPDATE vehicle_make SET product_count = ( SELECT COUNT(product_id) FROM taxonomy_master WHERE v_id IN ( SELECT id FROM vehicle_catalog WHERE make_id = '.$tempMake['id'].' ) ) WHERE id = '.$tempMake['id'], 'connection' => 'core' )); } I'm sure this query can be optimized to perform better, but I can't think of how to do it. vehicle_make = 45 rows taxonomy_master = 11,223 rows vehicle_catalog = 5,108 rows All tables have appropriate indexes

    Read the article

  • Datastore query outputting for Django form instance

    - by Jelle
    Hello! I'm using google appengine and Django. I'm using de djangoforms module and wanted to specify the form instance with the information that comes from the query below. userquery = db.GqlQuery("SELECT * FROM User WHERE googleaccount = :1", users.get_current_user()) form = forms.AccountForm(data=request.POST or None,instance=?????) I've found a snippet in a sample app that does this trick, but I can't modify it to work with the query I need. gift = User.get(db.Key.from_path(User.kind(), int(gift_id))) if gift is None: return http.HttpResponseNotFound('No gift exists with that key (%r)' % gift_id) form = RegisterForm(data=request.POST or None, instance=gift) Could anyone help me?

    Read the article

  • MVC Partial View Not Refreshing when using JSON data

    - by 40-Love
    I have a dropdown that I'm using to refresh a div with checkboxes. I am trying to figure out why my view is not refreshing if I pass in data in JSON format. If I pass in just a regular string, the view refreshes. If I pass in JSON data, the view does not refresh. If I step through the code in the Partial view, I can see the correct number of records are being passed in, however the view doesn't get refreshed with the correct number of checkboxes. I tried to add some cache directives, it didn't work. This doesn't work: $(function () { $('#ddlMoveToListNames').change(function () { var item = $(this).val(); var selectedListID = $('#ddlListNames').val(); var checkValues = $('input[name=c]:checked').map(function () { return $(this).val(); }).toArray(); $.ajax({ url: '@Url.Action("Test1", "WordList")', type: 'POST', cache: false, data: JSON.stringify({ words: checkValues, moveToListID: item, selectedListID: selectedListID }), dataType: 'json', contentType: 'application/json; charset=utf-8', success: function (result) { } }) .done(function (partialViewResult) { $("#divCheckBoxes").replaceWith(partialViewResult); }); }); }); This works: $(function () { $('#ddlMoveToListNames').change(function () { var item = $(this).val(); var selectedListID = $('#ddlListNames').val(); var checkValues = $('input[name=c]:checked').map(function () { return $(this).val(); }).toArray(); $.ajax({ url: '@Url.Action("Test1", "WordList")', type: 'POST', cache: false, data: { selectedListID: item }, success: function (result) { } }) .done(function (partialViewResult) { $("#divCheckBoxes").replaceWith(partialViewResult); }); }); }); Partial View: @model WLWeb.Models.MyModel <div id="divCheckBoxes"> @foreach (var item in Model.vwWordList) { @Html.Raw("<label><input type='checkbox' value='" + @Html.DisplayFor(modelItem => item.Word) + "' name='c'> " + @Html.DisplayFor(modelItem => item.Word) + "</label>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;"); } </div> Controller: [AcceptVerbs(HttpVerbs.Post)] [OutputCache(NoStore = true, Duration = 0, VaryByParam = "*")] public PartialViewResult Test1(MyModel vm, string[] words, string moveToListID, string selectedListID) { int listNameID = Convert.ToInt32(moveToListID); List<vwWordList> lst = db.vwWordLists.Where(s => s.Word.StartsWith("wa") && s.ListID == listNameID).ToList(); vm.vwWordList = lst; return PartialView("Partial1", vm); } View: @Html.DropDownListFor(x => Model.FilterViewModel.MoveToListNameID, Model.FilterViewModel.MoveToListNameList, new { @id = "ddlMoveToListNames", style = "width:100px;" })

    Read the article

< Previous Page | 448 449 450 451 452 453 454 455 456 457 458 459  | Next Page >