Search Results

Search found 44501 results on 1781 pages for 'software development life'.

Page 453/1781 | < Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >

  • Software Raid 10 corrupted superblock after dual disk failure, how do I recover it?

    - by Shoshomiga
    I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2, even if I assemble manually with all the device names. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris All 6 disks have the same layout, partition #1 is for raid 1 /boot, partition #2 is for raid 10 far plan, partition #3 is swap, but sda did not have swap enabled EDIT2: This is the output of mdadm --detail /dev/md1 Layout : near=1, far=2 Chunk Size : 64k UUID : a0feff55:2018f8ff:e368bf24:bd0fce41 Events : 0.3112126 Number Major Minor RaidDevice State 0 8 34 0 spare rebuilding /dev/sdc2 1 0 0 1 removed 2 8 18 2 active sync /dev/sdb2 3 8 50 3 active sync /dev/sdd2 4 0 0 4 removed 5 8 82 5 active sync /dev/sdf2 6 8 66 - spare /dev/sde2 EDIT3: I ran ddrescue and it has copied everything from sda except a single 4096 byte sector that I suspect is the raid superblock EDIT4: Here is some more info too long to fit here lshw: http://pastebin.com/2eKrh7nF mdadm --detail /dev/sd[abcdef]1 (raid1): http://pastebin.com/cgMQWerS mdadm --detail /dev/sd[abcdef]2 (raid10): http://pastebin.com/V5dtcGPF dumpe2fs of /dev/sda2 (from the ddrescue cloned drive): http://pastebin.com/sp0GYcJG I tried to recreate md1 based on this info with the command mdadm --create /dev/md1 -v --assume-clean --level=10 --raid-devices=6 --chunk=64K --layout=f2 /dev/sda2 missing /dev/sdc2 /dev/sdd2 missing /dev/sdf2 But I can't mount it, I also tried to recreate it based on my initial mdadm --detail /dev/md1 but it still doesn't mount It also warns me that /dev/sda2 is an ext2fs file system but I guess its because of ddrescue

    Read the article

  • Not All “Viruses” Are Viruses: 10 Malware Terms Explained

    - by Chris Hoffman
    Most people seem to call every type of malware a “virus”, but that isn’t technically accurate. You’ve probably heard of many more terms beyond virus: malware, worm, Trojan, rootkit, keylogger, spyware, and more. But what do all these terms mean? These terms aren’t just used by geeks. They make their way into even mainstream news stories about the latest web security problems and tech scares. Understanding them will help you understand the dangers your\ hear about. Malware The word “malware” is short for “malicious software.” Many people use the word “virus” to indicate any type of harmful software, but a virus is actually just a specific type of malware. The word “malware” encompasses all harmful software, including all the ones listed below. Virus Let’s start with viruses. A virus is a type of malware that copies itself by infecting other files,  just as viruses in the real world infect biological cells and use those biological cells to reproduce copies of themselves. A virus can do many different things — watch in the background and steal your passwords, display advertisements, or just crash your computer — but the key thing that makes it a virus is how it spreads. When you run a virus, it will infect programs on your computer. When you run the program on another computer, the virus will infect programs on that computer, and so on. For example, a virus might infect program files on a USB stick. When the programs on that USB stick are run on another computer, the virus runs on the other computer and infects more program files. The virus will continue to spread in this way. Worm A worm is similar to a virus, but it spreads a different way. Rather than infecting files and relying on human activity to move those files around and run them on different systems, a worm spreads over computer networks on its own accord. For example, the Blaster and Sasser worms spread very quickly in the days of Windows XP because Windows XP did not come properly secured and exposed system services to the Internet. The worm accessed these system services over the Internet, exploited a vulnerability, and infected the computer. The worm then used the new infected computer to continue replicating itself. Such worms are less common now that Windows is properly firewalled by default, but worms can also spread in other ways — for example, by mass-emailing themselves to every email address in an effected user’s address book. Like a virus, a worm can do any number of other harmful things once it infects a computer. The key thing that makes it a worm is simply how it spreads copies of itself. Trojan (or Trojan Horse) A Trojan horse, or Trojan, is a type of malware that disguises itself as a legitimate file. When you download and run the program, the Trojan horse will run in the background, allowing third-parties to access your computer. Trojans can do this for any number of reasons — to monitor activity on your computer, to join your computer to a botnet. Trojans may also be used to open the floodgates and download many other types of malware onto your computer. The key thing that makes this type of malware a Trojan is how it arrives. It pretends to be a useful program and, when run, it hides in the background and gives malicious people access to your computer. It isn’t obsessed with copying itself into other files or spreading over the network, as viruses and worms are. For example, a piece of pirated software on an unscrupulous website may actually contain a Trojan. Spyware Spyware is a type of malicious software that spies on you without your knowledge. It collects a variety of different types of data, depending on the piece of spyware. Different types of malware can function as spyware — there may be malicious spyware included in Trojans that spies on your keystrokes to steal financial data, for example. More “legitimate” spyware may be bundled along with free software and simply monitor your web browsing habits, uploading this data to advertising servers so the software’s creator can make money from selling their knowledge of your activities. Adware Adware often comes along with spyware. It’s any type of software that displays advertising on your computer. Programs that display advertisements inside the program itself aren’t generally classified as malware. The kind of “adware” that’s particularly malicious is the kind that abuses its access to your system to display ads when it shouldn’t. For example, a piece of harmful adware may cause pop-up advertisements to appear on your computer when you’re not doing anything else. Or, adware may inject additional advertising into other web pages as you browse the web. Adware is often combined with spyware — a piece of malware may monitor your browsing habits and use them to serve you more targeted ads. Adware is more “socially acceptable” than other types of malware on Windows and you may see adware bundled with legitimate programs. For example, some people consider the Ask Toolbar included with Oracle’s Java software adware. Keylogger A keylogger is a type of malware that runs in the background, recording every key stroke you make. These keystrokes can include usernames, passwords, credit card numbers, and other sensitive data. The keylogger then, most likely, uploads these keystrokes to a malicious server, where it can be analyzed and people can pick out the useful passwords and credit card numbers. Other types of malware can act as keyloggers. A virus, worm, or Trojan may function as a keylogger, for example. Keyloggers may also be installed for monitoring purposes by businesses or even jealous spouses. Botnet, Bot A botnet is a large network of computers that are under the botnet creator’s control. Each computer functions as a “bot” because it’s infected with a specific piece of malware. Once the bot software infects the computer, ir will connect to some sort of control server and wait for instructions from the botnet’s creator. For example, a botnet may be used to initiate a DDoS (distributed denial of service) attack. Every computer in the botnet will be told to bombard a specific website or server with requests at once, and such millions or requests can cause a server to become unresponsive or crash. Botnet creators may sell access to their botnets, allowing other malicious individuals to use large botnets to do their dirty work. Rootkit A rootkit is a type of malware designed to burrow deep into your computer, avoiding detection by security programs and users. For example, a rootkit might load before most of Windows, burying itself deep into the system and modifying system functions so that security programs can’t detect it. A rootkit might hide itself completely, preventing itself from showing up in the Windows task manager. The key thing that makes a type of malware a rootkit is that it’s stealthy and focused on hiding itself once it arrives. Ransomware Ransomware is a fairly new type of malware. It holds your computer or files hostage and demands a ransom payment. Some ransomware may simply pop up a box asking for money before you can continue using your computer. Such prompts are easily defeated with antivirus software. More harmful malware like CryptoLocker literally encrypts your files and demands a payment before you can access them. Such types of malware are dangerous, especially if you don’t have backups. Most malware these days is produced for profit, and ransomware is a good example of that. Ransomware doesn’t want to crash your computer and delete your files just to cause you trouble. It wants to take something hostage and get a quick payment from you. So why is it called “antivirus software,” anyway? Well, most people continue to consider the word “virus” synonymous with malware as a whole. Antivirus software doesn’t just protect against viruses, but against all types of malware. It may be more accurately referred to as “antimalware” or “security” software. Image Credit: Marcelo Alves on Flickr, Tama Leaver on Flickr, Szilard Mihaly on Flickr     

    Read the article

  • Java JRE 7 Certified with Oracle E-Business Suite

    - by Steven Chan (Oracle Development)
    Java Runtime Environment 7u10 (a.k.a. JRE 1.7.0_10 build 18) and later updates on the JRE 7 codeline are now certified with Oracle E-Business Suite Release 11i and 12 Windows-based desktop clients. What's needed to enable EBS environments for JRE 7? EBS customers should ensure that they are running JRE 7u10, at minimum, on Windows desktop clients. Of the compatibility issues identified with JRE 7, the most critical is an issue that prevents E-Business Suite Forms-based products from launching on Windows desktops that are running JRE 7.  Customers can prevent this issue -- and all other JRE 7 compatibility issues -- by ensuring that they have applied the latest certified patches documented for JRE 7 configurations to their EBS application tier servers.  These are summarized here for convenience. If the requirements change over time, please check the Notes for the authoritative list of patches: Apply Forms patch 14615390 to EBS 11i environments (Note 125767.1) Apply Forms patch 14614795 to EBS 12.0 and 12.1 environments (Note 437878.1) These patches are compatible with JRE 6 and 7, production ready, and fully-tested with the E-Business Suite.  These patches may be applied immediately to all E-Business Suite environments. All other Forms prerequisites documented in the Notes above should also be applied.  Where are the official patch requirements documented? All patches required for ensuring full compatibility of the E-Business Suite with JRE 7 are documented in these Notes: For EBS 11i: Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 11i (Note 290807.1) Upgrading Developer 6i with Oracle E-Business Suite 11i (Note 125767.1) For EBS 12 Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 12 (Note 393931.1) Upgrading OracleAS 10g Forms and Reports in Oracle E-Business Suite Release 12 (Note 437878.1) Prerequisites for 32-bit and 64-bit JRE certifications JRE 1.70_10 32-bit + EBS 11.5.10.2 Windows XP SP3 Windows Vista SP1 and SP2 Windows 7 and Windows 7 SP1  Forms 6.0.8.28.x patch 14615390 (Note 125767.1) JRE 1.70_10 32-bit + EBS 12.0 & 12.1 Windows XP SP3 Windows Vista SP1 and SP2 Windows 7 and Windows 7 SP1 Forms 10g overlay patch 14614795 (Note 437878.1) SSL Users:  10.1.0.5 version of Patch 6370967 applied to AS 10.1.3 with OPatch. Note: This fix is already included in the April 2011 AS 10.1.3.5 CPU patch and later. JRE 1.7.0_10 64-bit + EBS 11.5.10.2 Windows 7 (64-bit) and Windows 7 SP1 (64-bit) Forms 6.0.8.28.x patch 14615390 (Note 125767.1) JRE 1.70_10 64-bit + EBS 12.0 & 12.1 Windows 7 (64-bit) and Windows 7 SP1 (64-bit) Forms 10g overlay patch 14614795 (Note 437878.1) SSL Users:  10.1.0.5 version of Patch 6370967 applied to AS 10.1.3 with OPatch. Note: This fix is already included in the April 2011 AS 10.1.3.5 CPU patch and later.  EBS + Discoverer 11g Users JRE 1.7.0_10 (7u10) is certified for Discoverer 11g in E-Business Suite environments with the following minimum requirements: Discoverer (11g) 11.1.1.6 plus Patch 13877486 and later  Reference: How To Find Oracle BI Discoverer 10g and 11g Certification Information (Document 233047.1) Worried about the 'mismanaged session cookie' issue? No need to worry -- it's fixed.  To recap: JRE releases 1.6.0_18 through 1.6.0_22 had issues with mismanaging session cookies that affected some users in some circumstances. The fix for those issues was first included in JRE 1.6.0_23. These fixes will carry forward and continue to be fixed in all future JRE releases on the JRE 6 and 7 codelines.  In other words, if you wish to avoid the mismanaged session cookie issue, you should apply any release after JRE 1.6.0_22 on the JRE 6 codeline, and JRE 7u10 and later JRE 7 codeline updates. All JRE 6 and 7 releases are certified with EBS upon release Our standard policy is that all E-Business Suite customers can apply all JRE updates to end-user desktops from JRE 1.6.0_03 and later updates on the 1.6 codeline, and from JRE 7u10 and later updates on the JRE 7 codeline.  We test all new JRE 1.6 and JRE 7 releases in parallel with the JRE development process, so all new JRE 1.6 and 7 releases are considered certified with the E-Business Suite on the same day that they're released by our Java team.  You do not need to wait for a certification announcement before applying new JRE 1.6 or JRE 7 releases to your EBS users' desktops. Implications of Java 6 End of Public Updates for EBS Users The Support Roadmap for Oracle Java is published here: Oracle Java SE Support Roadmap The latest updates to that page (as of Sept. 19, 2012) state (emphasis added): Java SE 6 End of Public Updates Notice After February 2013, Oracle will no longer post updates of Java SE 6 to its public download sites. Existing Java SE 6 downloads already posted as of February 2013 will remain accessible in the Java Archive on Oracle Technology Network. Developers and end-users are encouraged to update to more recent Java SE versions that remain available for public download. For enterprise customers, who need continued access to critical bug fixes and security fixes as well as general maintenance for Java SE 6 or older versions, long term support is available through Oracle Java SE Support . What does this mean for Oracle E-Business Suite users? EBS users fall under the category of "enterprise users" above.  Java is an integral part of the Oracle E-Business Suite technology stack, so EBS users will continue to receive Java SE 6 updates after February 2013. In other words, nothing will change for EBS users after February 2013.  EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6. These Java SE 6 updates will be made available to EBS users for the Extended Support periods documented in the Oracle Lifetime Support policy document for Oracle Applications (PDF): EBS 11i Extended Support ends November 2013 EBS 12.0 Extended Support ends January 2015 EBS 12.1 Extended Support ends December 2018 Will EBS users be forced to upgrade to JRE 7 for Windows desktop clients? No. This upgrade is highly recommended but currently remains optional. JRE 6 will be available to Windows users to run with EBS for the duration of your respective EBS Extended Support period.  Updates will be delivered via My Oracle Support, where you can continue to receive critical bug fixes and security fixes as well as general maintenance for JRE 6 desktop clients.  Coexistence of JRE 6 and JRE 7 on Windows desktops The upgrade to JRE 7 is highly recommended for EBS users, but some users may need to run both JRE 6 and 7 on their Windows desktops for reasons unrelated to the E-Business Suite. Most EBS configurations with IE and Firefox use non-static versioning by default. JRE 7 will be invoked instead of JRE 6 if both are installed on a Windows desktop. For more details, see "Appendix B: Static vs. Non-static Versioning and Set Up Options" in Notes 290801.1 and 393931.1. Applying Updates to JRE 6 and JRE 7 to Windows desktops Auto-update will keep JRE 7 up-to-date for Windows users with JRE 7 installed. Auto-update will only keep JRE 7 up-to-date for Windows users with both JRE 6 and 7 installed.  JRE 6 users are strongly encouraged to apply the latest Critical Patch Updates as soon as possible after each release. The Jave SE CPUs will be available via My Oracle Support.  EBS users can find more information about JRE 6 and 7 updates here: Information Center: Installation & Configuration for Oracle Java SE (Note 1412103.2) The dates for future Java SE CPUs can be found on the Critical Patch Updates, Security Alerts and Third Party Bulletin.  An RSS feed is available on that site for those who would like to be kept up-to-date. What will Mac users need? Oracle will provide updates to JRE 7 for Mac OS X users. EBS users running Macs will need to upgrade to JRE 7 to receive JRE updates. The certification of Oracle E-Business Suite with JRE 7 for Mac-based desktop clients accessing EBS Forms-based content is underway. Mac users waiting for that certification may find this article useful: How to Reenable Apple Java 6 Plug-in for Mac EBS Users Will EBS users be forced to upgrade to JDK 7 for EBS application tier servers? No. This upgrade will be highly recommended but will be optional for EBS application tier servers running on Windows, Linux, and Solaris.  You can choose to remain on JDK 6 for the duration of your respective EBS Extended Support period.  If you remain on JDK 6, you will continue to receive critical bug fixes and security fixes as well as general maintenance for JDK 6. The certification of Oracle E-Business Suite with JDK 7 for EBS application tier servers on Windows, Linux, and Solaris as well as other platforms such as IBM AIX and HP-UX is planned.  Customers running platforms other than Windows, Linux, and Solaris should refer to their Java vendors's sites for more information about their support policies. References Recommended Browsers for Oracle Applications 11i (Metalink Note 285218.1) Upgrading Sun JRE (Native Plug-in) with Oracle Applications 11i for Windows Clients (Metalink Note 290807.1) Recommended Browsers for Oracle Applications 12 (MetaLink Note 389422.1) Upgrading JRE Plugin with Oracle Applications R12 (MetaLink Note 393931.1) Related Articles Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23 Roundup: Oracle JInitiator 1.3 Desupported for EBS Customers in July 2009

    Read the article

  • Any Good Cocos2d Pause Menu Library

    - by Mahbubur R Aaman
    Background : From http://code.google.com/p/cocos2d-iphone/issues/detail?id=173 Scenes/Nodes doesn't support the CocosNodeOpacity protocol. From http://playsnackgames.com/blog/2011/09/cocos2d-tutorial-creating-a-reusable-pause-layer/ Cocos2d offers a simple method to pause and resume itself, but these methods stop the CCDirector (the class that manages most aspects of a Cocos2d’s app lifetime) from running actions and lower the fps to 5 to conserve battery life. Related issues http://www.cocos2d-iphone.org/forum/topic/4368 http://www.cocos2d-iphone.org/forum/topic/151 http://stackoverflow.com/questions/5852354/cocos2d-engine-pause-resume http://stackoverflow.com/questions/11878450/how-to-pause-a-layer-in-cocos2d-2-0 Question : Is there any Good Cocos2d Pause Menu Library solving these tricky issues? This will save many hours of Game Developer's life.

    Read the article

  • 8 Reasons Why Even Microsoft Agrees the Windows Desktop is a Nightmare

    - by Chris Hoffman
    Let’s be honest: The Windows desktop is a mess. Sure, it’s extremely powerful and has a huge software library, but it’s not a good experience for average people. It’s not even a good experience for geeks, although we tolerate it. Even Microsoft agrees about this. Microsoft’s Surface tablets with Windows RT don’t support any third-party desktop apps. They consider this a feature — users can’t install malware and other desktop junk, so the system will always be speedy and secure. Malware is Still Common Malware may not affect geeks, but it certainly continues to affect average people. Securing Windows, keeping it secure, and avoiding unsafe programs is a complex process. There are over 50 different file extensions that can contain harmful code to keep track of. It’s easy to have theoretical discussions about how malware could infect Mac computers, Android devices, and other systems. But Mac malware is extremely rare, and has  generally been caused by problem with the terrible Java plug-in. Macs are configured to only run executables from identified developers by default, whereas Windows will run everything. Android malware is talked about a lot, but Android malware is rare in the real world and is generally confined to users who disable security protections and install pirated apps. Google has also taken action, rolling out built-in antivirus-like app checking to all Android devices, even old ones running Android 2.3, via Play Services. Whatever the reason, Windows malware is still common while malware for other systems isn’t. We all know it — anyone who does tech support for average users has dealt with infected Windows computers. Even users who can avoid malware are stuck dealing with complex and nagging antivirus programs, especially since it’s now so difficult to trust Microsoft’s antivirus products. Manufacturer-Installed Bloatware is Terrible Sit down with a new Mac, Chromebook, iPad, Android tablet, Linux laptop, or even a Surface running Windows RT and you can enjoy using your new device. The system is a clean slate for you to start exploring and installing your new software. Sit down with a new Windows PC and the system is a mess. Rather than be delighted, you’re stuck reinstalling Windows and then installing the necessary drivers or you’re forced to start uninstalling useless bloatware programs one-by-one, trying to figure out which ones are actually useful. After uninstalling the useless programs, you may end up with a system tray full of icons for ten different hardware utilities anyway. The first experience of using a new Windows PC is frustration, not delight. Yes, bloatware is still a problem on Windows 8 PCs. Manufacturers can customize the Refresh image, preventing bloatware rom easily being removed. Finding a Desktop Program is Dangerous Want to install a Windows desktop program? Well, you’ll have to head to your web browser and start searching. It’s up to you, the user, to know which programs are safe and which are dangerous. Even if you find a website for a reputable program, the advertisements on that page will often try to trick you into downloading fake installers full of adware. While it’s great to have the ability to leave the app store and get software that the platform’s owner hasn’t approved — as on Android — this is no excuse for not providing a good, secure software installation experience for typical users installing typical programs. Even Reputable Desktop Programs Try to Install Junk Even if you do find an entirely reputable program, you’ll have to keep your eyes open while installing it. It will likely try to install adware, add browse toolbars, change your default search engine, or change your web browser’s home page. Even Microsoft’s own programs do this — when you install Skype for Windows desktop, it will attempt to modify your browser settings t ouse Bing, even if you’re specially chosen another search engine and home page. With Microsoft setting such an example, it’s no surprise so many other software developers have followed suit. Geeks know how to avoid this stuff, but there’s a reason program installers continue to do this. It works and tricks many users, who end up with junk installed and settings changed. The Update Process is Confusing On iOS, Android, and Windows RT, software updates come from a single place — the app store. On Linux, software updates come from the package manager. On Mac OS X, typical users’ software updates likely come from the Mac App Store. On the Windows desktop, software updates come from… well, every program has to create its own update mechanism. Users have to keep track of all these updaters and make sure their software is up-to-date. Most programs now have their act together and automatically update by default, but users who have old versions of Flash and Adobe Reader installed are vulnerable until they realize their software isn’t automatically updating. Even if every program updates properly, the sheer mess of updaters is clunky, slow, and confusing in comparison to a centralized update process. Browser Plugins Open Security Holes It’s no surprise that other modern platforms like iOS, Android, Chrome OS, Windows RT, and Windows Phone don’t allow traditional browser plugins, or only allow Flash and build it into the system. Browser plugins provide a wealth of different ways for malicious web pages to exploit the browser and open the system to attack. Browser plugins are one of the most popular attack vectors because of how many users have out-of-date plugins and how many plugins, especially Java, seem to be designed without taking security seriously. Oracle’s Java plugin even tries to install the terrible Ask toolbar when installing security updates. That’s right — the security update process is also used to cram additional adware into users’ machines so unscrupulous companies like Oracle can make a quick buck. It’s no wonder that most Windows PCs have an out-of-date, vulnerable version of Java installed. Battery Life is Terrible Windows PCs have bad battery life compared to Macs, IOS devices, and Android tablets, all of which Windows now competes with. Even Microsoft’s own Surface Pro 2 has bad battery life. Apple’s 11-inch MacBook Air, which has very similar hardware to the Surface Pro 2, offers double its battery life when web browsing. Microsoft has been fond of blaming third-party hardware manufacturers for their poorly optimized drivers in the past, but there’s no longer any room to hide. The problem is clearly Windows. Why is this? No one really knows for sure. Perhaps Microsoft has kept on piling Windows component on top of Windows component and many older Windows components were never properly optimized. Windows Users Become Stuck on Old Windows Versions Apple’s new OS X 10.9 Mavericks upgrade is completely free to all Mac users and supports Macs going back to 2007. Apple has also announced their intention that all new releases of Mac OS X will be free. In 2007, Microsoft had just shipped Windows Vista. Macs from the Windows Vista era are being upgraded to the latest version of the Mac operating system for free, while Windows PCs from the same era are probably still using Windows Vista. There’s no easy upgrade path for these people. They’re stuck using Windows Vista and maybe even the outdated Internet Explorer 9 if they haven’t installed a third-party web browser. Microsoft’s upgrade path is for these people to pay $120 for a full copy of Windows 8.1 and go through a complicated process that’s actaully a clean install. Even users of Windows 8 devices will probably have to pay money to upgrade to Windows 9, while updates for other operating systems are completely free. If you’re a PC geek, a PC gamer, or someone who just requires specialized software that only runs on Windows, you probably use the Windows desktop and don’t want to switch. That’s fine, but it doesn’t mean the Windows desktop is actually a good experience. Much of the burden falls on average users, who have to struggle with malware, bloatware, adware bundled in installers, complex software installation processes, and out-of-date software. In return, all they get is the ability to use a web browser and some basic Office apps that they could use on almost any other platform without all the hassle. Microsoft would agree with this, touting Windows RT and their new “Windows 8-style” app platform as the solution. Why else would Microsoft, a “devices and services” company, position the Surface — a device without traditional Windows desktop programs — as their mass-market device recommended for average people? This isn’t necessarily an endorsement of Windows RT. If you’re tech support for your family members and it comes time for them to upgrade, you may want to get them off the Windows desktop and tell them to get a Mac or something else that’s simple. Better yet, if they get a Mac, you can tell them to visit the Apple Store for help instead of calling you. That’s another thing Windows PCs don’t offer — good manufacturer support. Image Credit: Blanca Stella Mejia on Flickr, Collin Andserson on Flickr, Luca Conti on Flickr     

    Read the article

  • Speaking at MK Code Camp 2012

    - by hajan
    This year same as the previous one, Macedonian .NET User Group is organizing the biggest event for developers and coders, event that is focusing on Microsoft technologies, Macedonian CODE CAMP 2012! The Code Camp 2012 will be held at 24th of November at FON University. In the first few hours we have more than 500 registered attendees and the number is increasing rapidly! At this year’s Code Camp, I will be speaking on topic “Modern Web Development Principles”, an interesting topic that will focus mainly on updating all the developer with the latest development trends. Here is the whole session description: “Through lot of code and demonstrations, this presentation aims to update you with the latest web development trends by clearly showing what has changed in web development today comparing with the previous years, what are the newest trends and how you can leverage the Microsoft ASP.NET platform together with all client-side centric development libraries to build the next generation of web apps following the standards and the modern web development principles. This is session for everyone who is involved into Web development in this way or another!” Quick links for those who want to learn more about this event: Code Camp 2012 Sessions (25 Sessions) Code Camp 2012 Speakers (More than 25 Speakers, 5 Microsoft MVPs, 1 MSFT, Many known Experts) Registration Link If you are somewhere around and interested to join the event, you are welcome! Hajan

    Read the article

  • Simple heart container script for 2D game (Unity)?

    - by N1ghtshade3
    I'm attempting to create a simple mobile game (C#) that involves a simple three-heart life system. After searching for hours online, many of the solutions use OnGUI (which is apparently horrible for performance) and the rest are too complicated for me to understand and add to my code. The other solutions involve using a single texture and just hiding part of it when damage is taken. In my game, however, the player should be able to go over three hearts (for example, every 100 points). Sebastian Lague's Zelda-Style Health is what I'm looking for, but even though it's a tutorial there is way too much going on that I don't need or can't customize to fit in mine. What I have so far is a script called HealthScript.cs which contains a variable lives. I have another script, PlayerPhysics.cs which calls HealthScript and subtracts a life when an enemy is hit. The part I don't get is actually drawing the hearts. I think I understand what needs to happen, I just am not experienced enough with Unity to know how. The Start function should draw three (or whatever lives is set to) hearts in the top right corner. Since the game should be resolution-independent to accommodate the various sizes of Android devices, I'd rather use scaling rather than PixelInset. When the player hits an enemy as detected by PlayerPhysics.cs, it should subtract from lives. I think that I have this working using this.GetComponent<HealthScript>().lives -= 1 but I'm not sure if it actually works. This should trigger a redraw of the hearts so that there are now two hearts. The same principle would apply for adding hearts when a score is reached, except when lives > maxHeartsPerRow, the new hearts should be drawn below the old ones. I realise I don't have much code to show but believe me; I've tried for quite some time to figure this out and have little to show for it. Any help at all would be welcome; it seems like it shouldn't take that much code to put an image on the screen for each life there is, but I haven't found anything yet. Thanks!

    Read the article

  • Development/runtime Licensing mechanism for a C# class library?

    - by Darryl
    I'm developing a .Net class library (a data provider) and I'm starting to think about how I would handle licensing the library to prospective purchasers. By licensing, I mean the mechanics of trying to prevent my library from being used by those who haven't purchased it, not the software license (i.e., Apache, Gnu, etc). I've never dealt with licensing, and in the past, I've always developed apps, not libraries. I don't want to make things difficult for my customers; know it is not possible to make it ironclad. Just some mechanism that gives me decent protection without making the customer jump through hoops or gnash their teeth. I think the mechanism would check for a valid license when the class is being used in development mode, and not in runtime mode (when the customer's software is released to their customers). I think libraries are typically sold per developer, but I'm not sure how that could be accomplished without making the mechanism odious for my customers; maybe that gets left to the honor system. I Googled this and found many approaches. Ideally, I'd like to do something that is generally accepted and common, the "right" way class libraries are licensed, if that exists, rather than making my customers deal with yet another license mechanism. A firm push in the right direction will be greatly appreciated!

    Read the article

  • How to allow program updates without prompting UAC?

    - by Ryan Mortier
    We have about 15-20 users who have this software installed. We have UAC enabled through GPO as you should, which means the software prompts for admin approval if a standard user trys to install it. Thats fine, they can call the help desk to have the software installed. My problem is, our help desk is being bombarded every day because users can't update the software and there are updates almost every day which is prompting UAC. Using procmon.exe to find out where it was trying to write to, I then created a GPO to allow file permission access to the program files folder for this particular software, including the program data folder, but it still prompts for admin approval. It seems as though that the software is using msiexec.exe to run a .msp patch file. The only "ACCESS DENIED"s I can still see in procmon is things like this: What can I possibly do to stop this software from prompting UAC with admin password credentials aside from disabling UAC?

    Read the article

  • What IDE setup and workflow is used for OSGi development?

    - by Falx
    I made quite a few easy OSGi test projects in Eclipse RCP. My typical workflow would always be: Make 3 different projects: APIproject, Clientproject and Serverproject Edit the MANIFEST.MF of APIproject to export the api package Edit the MANIFEST.MF file of Clientproject and Serverproject to add the required API package Choose "Run as..." "Plugin Framework" OSGi console starts in eclipse and everything seems to work I also tried wiring things by using Declarative Services, which worked well like this too. Now recently I wanted to try out iPOJO. The problem is that I get the feeling that I've been doing my OSGi development the wrong way. Can it be that I should instead make 1 project en make it work like no OSGi is involved. And then afterwards, just export each package to its own bundle by means of (for instance) the BNDL tool? Should development be done in a normal Eclipse (java, not RCP) or any other java IDE for that matter? So that's why I have these questions: What IDE setup is normally used to develop OSGi with iPOJO? And what is the normal workflow to be used when developing OSGi projects (maybe with iPOJO)?

    Read the article

  • Bespoke Development or Leverage SharePoint With Web Parts etc?

    - by Asim
    Hi all, We are currently in the process of drawing up a solution for an existing client, creating a number of eServices. The client currently have MOSS 2007. The proposed solution is to use MOSS as the launching pad for the eServices… The requirement involves drawing up several online forms which provide registration facilities as well as facilitating a workflow of some sort. I have been told that the proposed solution requires complex web forms. Most are complex forms with parent child details that have multiple windows. The proposed solution is to do some bespoke development, developing ASP .NET forms. These forms would be deployed under the _layouts folder of the current MOSS portal, inheriting the master page design on the current site. I have been told that this approach make development and deployment more simple, as well has having ‘complete integration’ with MOSS. My questions are: Is this the best way to leverage SharePoint – it seems like the proposed solution is not leveraging MOSS at all..! I thought perhaps utilizing Web Parts would be better, but I have been told that this is more complex and developing more smarter intuitive UI is more difficult. Is this really the case? If not, what should be the recommended approach? We will be utilizing Ultimus as the workflow engine. However, I have been recommended K2 Workflows. Anyone used both/have any opinions on either? Many thanks in advance! Kind Regards,

    Read the article

  • What are the common compliance standards for software products?

    - by Jay
    This is a very generic question about software products. I would like to know what compliance standards are applicable to any software product. I know that question gives away nothing. So, here is an example to what I am referring to. CiSecurity Security Certification/Compliance lists out products ceritified by them to be compliant to the standards published at their website, i.e, cisecurity.org. Compliance could be as simple as answering a questionnaire for your product and approved by a thirdparty like cisecurity or it could apply to your whole organization, for instance, PCI-DSS compliance. I would be very interested in knowing the standards that products you know/designed/created, comply to. To give you the context behind this question: I am the developer of a data-masking tool. The said tool helps mask onscreen html text in a banking web application using filters. So, for instance, if the bank application lists out user information with ssn, my product when integrated with the banking product, automatically identifies ssn pattern and masks it into a pre-defined format.So, I have my product marketing team wanting more buzz words like compliance to be able to sell it to more banking clients. Hence, understanding "compliances that apply to products" is a key research item for me at this point. By which I meant, security compliances. Appreciate all your help and suggestions.

    Read the article

  • Audio splitting and noise removal on Windows

    - by pts
    My mother has about 100 hours of audio in a mix of MP3 and WAV files, the digitized versions of her vinyl records. Each file contains about 5 songs with a few seconds of (noisy) pause between them. My mother needs software for Windows XP with which she can listen to the files, find the gaps manually, split the files at the gaps found, reduce noise on each song, and export the songs to individual MP3 files. My mother has very limited software user skills and affinity, and she doesn't speak English. The simpler the software, the better for her, even if noise reduction is worse than with a more sophisticated, but more complicated software. I'd prefer free software, freeware or shareware (which can do all above). Please recommend something much simpler than Audacity. The software should guide the user through the process, always showing the next few available steps, and being intuitive in the sense that there are only a few allowed actions and it's obvious what they are and how to activate them. Which software would you recommend?

    Read the article

  • Understanding how software testing works and what to test.

    - by RHaguiuda
    Intro: I've seen lots of topics here on SO about software testing and other terms I don't understand. Problem: As a beginner developer I, unfortunately, have no idea how software testing works, not even how to test a simple function. This is a shame, but thats the truth. I also hope this question can help others beginners developers too. Question: Can you help me to understand this subject a little bit more? Maybe some questions to start would help: When I develop a function, how should I test it? For example: when working with a sum function, should I test every input value possible or just some limits? How about testing functions with strings as parameters? In a big program, do I have to test every single piece of code of it? When you guys program do you test every code written? How automated test works and how can I try one? How tools for automated testing works and what they do? I`ve heard about unit testing. Can I have a brief explanation on this? What is a testing framework? If possible please post some code with examples to clarify the ideas. Any help on this topic is very welcome! Thanks.

    Read the article

  • many to many and integrity when saving the null

    - by user369759
    I have two classes Software, Tag - they are related by ManyToMany. We CAN NOT create Software without putting the Tag to it. I want to write a test which check that: @Test public void createSoftwareWithNullTags() { List<Tag> tags = null; Software software = new Software("software1", "description1", tags); try { software.save(); fail("tags should not be null"); } catch (Exception ex) { // NEVER COME HERE !!! } } So, this test fails. I guess it is not good test for that case - because it even do not try to SAVE data to SOFTWARE_TAG table. Of course i could do validation manually but i want implement it with hibernate, using some annotation or something. Is it possible? Or how would you do this? My entities: @Entity public class Tag extends Model { public String title; public Tag(String title) { this.title = title; } @ManyToMany( cascade = {CascadeType.ALL}, mappedBy = "tags", targetEntity = Software.class ) public List<Software> softwares; } @Entity public class Software extends Model { public String title; public String description; @ManyToOne(optional = false) public Author author; @ManyToMany(cascade = CascadeType.ALL) @JoinTable( name = "SOFTWARE_TAG", joinColumns = @JoinColumn(name = "Software_id"), inverseJoinColumns = @JoinColumn(name = "Tag_id") ) public List<Tag> tags; public Software(String title, String description, Author author, List<Tag> tags) { this.title = title; this.description = description; this.author = author; this.tags = tags; } }

    Read the article

  • Should I invest in GraniteDS for Flex + Java development?

    - by Boden
    I'm new to Flex development, and RIAs in general. I've got a CRUD-style Java + Spring + Hibernate service on top of which I'm writing a Flex UI. Currently I'm using BlazeDS. This is an internal application running on a local network. It's become apparent to me that the way RIAs work is more similar to a desktop application than a web application in that we load up the entire model and work with it directly on the client (or at least the portion that we're interested in). This doesn't really jive well with BlazeDS because really it only supports remoting and not data management, thus it can become a lot of extra work to make sure that clients are in sync and to avoid reloading the model which can be large (especially since lazy loading is not possible). So it feels like what I'm left with is a situation where I have to treat my Flex application more like a regular old web application where I do a lot of fine grained loading of data. LiveCycle is too expensive. The free version of WebOrb for Java really only does remoting. Enter GraniteDS. As far as I can determine, it's the only free solution out there that has many of the data management features of LiveCycle. I've started to go through its documentation a bit and suddenly feel like it's yet another quagmire of framework that I'll have to learn just to get an application running. So my question(s) to the StackOverflow audience is: 1) do you recommend GraniteDS, especially if my current Java stack is Spring + Hibernate? 2) at what point do you feel like it starts to pay off? That is, at what level of application complexity do you feel that using GraniteDS really starts to make development that much better? In what ways?

    Read the article

  • Is text-only mode a saving or a problem for battery savings?

    - by Robottinosino
    A friend is flying to the US from Europe and asked me a very thought-provoking question, which I am not remotely able to answer with substance so I am asking it here: How to absolutely maximise battery life on an Ubuntu (laptop) install? do not rush to mark this as duplicate, there is an important point here: does -GNOME- help or worsen battery life? Let me provide some context: The only task he needs to perform is: edit text files in Vim. He is unsure whether running GNOME will drain his battery life more or actually save him some battery life given the smarts of GNOME's power management features like "switch this peripheral to -power save- after X minutes..." (GNOME might just be a configuration front-end for settings that are governed by command-line utils for all I know?) He could perfectly well boot the system in text-only mode and use the automatic 6 virtual consoles for his needs, if that's a saving at all over running tmux (I think so because of all the smart buffering/history/etc the latter does by default?) Exactly how would you advise him to run his laptop during his flight? What I told him already: power off WiFi in the BIOS, not from the "GUI" power off Bluetooth switch off the courtesy light and use low monitor brightness play music off of his phone, not mp3blaster do not use his tiny portable mouse (and do not attach any other USB gimmicks like "screen light", etc) stop development services he will not be using, especially apache2, tomcat, dovecot, postgresql, etc. Potentially: - switch off his cron jobs? (he does an rsync + tar + 7za of his "work in progress" every so often) I think the above is standard stuff one could get off StackExchange, and with many duplicates... the core of this question is, I think: __ will running Ubuntu in text-only mode be a saving in terms of battery life or a problem? why? (provide some technical arguments) __ I think it will be a saving but I am also scared about "other things" detecting and enabling advanced chipset power management features only when some services are started.. and fear these "services" may be off in text-only mode?

    Read the article

  • What are the first steps in C#/.NET development?

    - by paxdiablo
    Okay, I'm biting the bullet and deciding to get into the whole Microsoft/C#/.NET culture and I'm going to do this by putting together a simple (hah!) application. It will basically be an application in which I want to store images and associate with them other optional things. It must be able to import images from the filesystem (and hopefully camera/scanner) then allow the user to add text, audio and other information. I plan to store the images and auxillary information into a database. What the application will do with said data isn't important (yet). Keep in mind I know absolutely nothing about C# or .NET although, as an old codger, I know a great deal about many other things and will regale you with stories and anecdotes until you quietly slip away :-) What are the first steps to take in developing such an application? I've already set out UI layouts and likely process flows although it may be that the development environment dictates changes. Development environment is currently XP SP3 + VS2008 (though I can upgrade if absolutely necessary). What should I be looking at as the first step? Are there any gotchas I should be looking out for?

    Read the article

  • Is there any library/software available that can give me useful measurements of image quality?

    - by Thor84no
    I realise measuring image quality in software is going to be really difficult, and I'm not looking for a quick-fix. Googling this is largely showing up research papers and discussions that go a bit over my head, so I was wondering if anyone in the SO community had any experience with doing any rough image quality assessment? I want to use this to scan a few thousand images and whittle it down to a few dozen images that are most likely of poor quality. I could then show these to a user and leave the rest to them. Obviously there are many metrics that can be a part of whether an image is of high/low quality, I'd be happy with anything that could take an image as an input and give some reasonable metrics to any of the basic image quality metrics like sharpness, dynamic range, noise, etc., leaving it up to my software to determine what's acceptable and what isn't. Some of the images are poor quality because they've been up-scaled drastically. If there isn't a way of getting metrics like I suggested above, is there any way to detect that an image has been up-scaled like this?

    Read the article

  • Where to start with the development of first database driven Web App (long question)?

    - by Ryan
    Hi all, I've decided to develop a database driven web app, but I'm not sure where to start. The end goal of the project is three-fold: 1) to learn new technologies and practices, 2) deliver an unsolicited demo to management that would show how information that the company stores as office documents spread across a cumbersome network folder structure can be consolidated and made easier to access and maintain and 3) show my co-workers how Test Drive Development and prototyping via class diagrams can be very useful and reduces future maintenance headaches. I think this ends up being a basic CMS to which I have generated a set of features, see below. 1) Create a database to store the site structure (organized as a tree with a 'project group'-project structure). 2) Pull the site structure from the database and display as a tree using basic front end technologies. 3) Add administrator privileges/tools for modifying the site structure. 4) Auto create required sub pages* when an admin adds a new project. 4.1) There will be several sub pages under each project and the content for each sub page is different. 5) add user privileges for assigning read and write privileges to sub pages. What I would like to do is use Test Driven Development and class diagramming as part of my process for developing this project. My problem; I'm not sure where to start. I have read on Unit Testing and UML, but never used them in practice. Also, having never worked with databases before, how to I incorporate these items into the models and test units? Thank you all in advance for your expertise.

    Read the article

  • Rails 2.3.4 and jquery form plugin works on development, not in production?

    - by hemajang
    Hello, i'm trying to build a contact form in Rails 2.3.4. I'm using the jQuery Form plugin along with this (http://bassistance.de/jquery-plugins/jquery-plugin-validation/) for validations. Everything works in my development environment (mac os x snow leopard), the loading gif appears and on my log the email gets sent and the "request completed" notice shows. But on my production machine the loading gif just keeps going and the form doesn't get sent. I've waited as long as I could, nothing. Here is my code: /public/javascripts/application.js // client-side validation and ajax submit contact form $('#contactForm').validate( { rules: { 'email[name]': { required: true }, 'email[address]': { required: true, email: true }, 'email[subject]': { required: true }, 'email[body]': { required: true } }, messages: { 'email[name]': "Please enter your name.", 'email[address]': "Please enter a valid email address.", 'email[subject]': "Please enter a subject.", 'email[body]': "Please enter a message." }, submitHandler: function(form) { $(form).ajaxSubmit({ dataType: 'script', beforeSend: function() { $(".loadMsg").show(); } }); return false; } }); I'm using the submitHandler to send the actual ajaxSubmit. I added the "dataType: "script" and the "beforeSubmit" for the loading graphic. def send_mail if request.post? respond_to do |wants| ContactMailer.deliver_contact_request(params[:email]) flash[:notice] = "Email was successfully sent." wants.js end end end Everything works fine on development, but not in production. What am I missing or did wrong?

    Read the article

  • Job conditions conflicting with personal principles on software-development - how much is too much?

    - by Baelnorn
    Sorry for the incoming wall'o'text (and for my probably bad English) but I just need to get this off somehow. I also accept that this question will be probably closed as subjective and argumentative, but I need to know one thing: "how much BS are programmers supposed to put up with before breaking?" My background I'm 27 years old and have a B.Sc. in Computer engineering with a graduation grade of 1.8 from a university of applied science. I went looking for a job right after graduation. I got three offers right away, with two offers paying vastly more than the last one, but that last one seemed more interesting so I went for that. My situation I've been working for the company now for 17 months now, but it feels like a drag more and more each day. Primarily because the company (which has only 5 other developers but me, and of these I work with 4) turned out to be pretty much the anti-thesis of what I expected (and was taught in university) from a modern software company. I agreed to accept less than half of the usual payment appropriate for my qualification for the first year because I was promised a trainee program. However, the trainee program turned out to be "here you got a computer, there's some links on the stuff we use, and now do what you colleagues tell you". Further, during my whole time there (trainee or not) I haven't been given the grace of even a single code-review - apparently nobody's interested in my work as long as it "just works". I was told in the job interview that "Microsoft technology played a central role in the company" yet I've been slowly eroding my congnitive functions with Flex/Actionscript/Cairngorm ever since I started (despite having applied as a C#/.NET developer). Actually, the company's primary projects are based on Java/XSLT and Flex/Actionscript (with some SAP/ABAP stuff here and there but I'm not involved in that) and they've been working on these before I even applied. Having had no experience either with that particular technology nor the framework nor the field (RIA) nor in developing business scale applications I obviously made several mistakes. However, my boss told me that he let me make those mistakes (which ate at least 2 months of development time on their own) on purpose to provide some "learning experience". Even when I was still a trainee I was already tasked with working on a business-critical application. On my own. Without supervision. Without code-reviews. My boss thinks agile methods are a waste of time/money and deems putting more than one developer on any project not efficient. Documentation is not necessary and each developer should only document what he himself needs for his work. Recently he wanted us to do bug tracking with Excel and Email instead of using an already existing Bugzilla, overriding an unanimous decision made by all developers and testers involved in the process - only after another senior developer had another hour-long private discussion with him he agreed to let us use the bugtracker. Project management is basically not present, there are only a few Excel sheets floating around where the senior developer lists some things (not all, mind you) with a time estimate ranging from days to months, trying to at least somehow organize the whole mess. A development process is also basically not present, each developer just works on his own however he wants. There are not even coding conventions in the company. Testing is done manually with a single tester (sometimes two testers) per project because automated testing wasn't given the least thought when the whole project was started. I guess it's not a big surprise when I say that each developer also has his own share of hundreds of overhours (which are, of course, unpaid). Each developer is tasked with working on his own project(s) which in turn leads to a very extensive knowledge monopolization - if one developer was to have an accident or become ill there would be absolutely no one who could even hope to do his work. Considering that each developer has his own business-critical application to work on, I guess that's a pretty bad situation. I've been trying to change things for the better. I tried to introduce a development process, but my first attempt was pretty much shot down by my boss with "I don't want to discuss agile methods". After that I put together a process that at least resembled how most of the developers were already working and then include stuff like automated (or at least organized) testing, coding conventions, etc. However, this was also shot down because it wasn't "simple" enought to be shown on a business slide (actually, I wasn't even given the 15 minutes I'd have needed to present the process in the meeting). My problem I can't stand working there any longer. Seriously, I consider to resign on monday, which still leaves me with 3 months to work there due to the cancelation period. My primary goal since I started studying computer science was being a good computer scientist, working with modern technologies and adhering to modern and proven principles and methods. However, the company I'm working for seems to make that impossible. Some days I feel as if was living in a perverted real-life version of the Dilbert comics. My question Am I overreacting? Is this the reality each graduate from university has to face? Should I betray my sound principles and just accept these working conditions? Or should I gtfo of there? What's the opinion of other developers on this matter. Would you put up with all that stuff?

    Read the article

< Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >