Search Results

Search found 18842 results on 754 pages for 'the machine'.

Page 453/754 | < Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >

• Force local IP traffic to an external interface

  - by calandoa

  I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to be able to forward all the traffic to one of these local address trhough the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 are not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

  Read the article

• Tool needed for remote software deployment to Windows PC's over internet

  - by user56527

  Hi Can anyone recommend a commercial software package that enables automated rollouts of a bespoke software package across the internet? We are looking at approximately 1000 remote PC's that our organisation owns, geographically scattered and with varying bandwidths available from a central site. The PC's are not manned, they are used as server machines. The tool needs to have some scripting facilities too. The tool needs to be able to push software to the remote site in an automated way. We also need it to be able to reboot the remote machine too. Any ideas anyone? thanks.

  Read the article

• What are the pros and cons about developing under MAC OS? [closed]

  - by user827992

  Sometimes i get the chance to program under MAC OS, i knew about this OS since Apple shipped its computers with a PowerPC by Motorola ( since Panther, more or less ), these days they are all X86 and i see no particular advantages about adopting this platform, also i see only downsides for the main part, i do not want to cause flames, please reply if you have a good answer or you can contribute in some constructive way. I'm trying to write a list of the natively supported languages, or the languages that comes only under MAC OS with some particular technology, my list is this: Objective C with Cocoa/Carbon I'm not considering personal preferences here, if a person X likes to code under Xcode it's probably ok to have a MAC, if a person Y likes to code under Visual Studio it's probably ok to not having a MAC, my purpose is to clarify what MAC OS is good for. I also do not get why people glorify the MAC for historical reasons, I mean a language like Java just comes for MAC only in the 7th edition of its JDK, things like GCC are just a porting and many technologies are out of the question like C# ( I'm sorry, i do not consider MonoDevelop like a serious alternative ) , .Net, ASP, DirectX, and many others are just, again, porting or free software, like PHP, MySQL, Javascript, XML, CSS, OpenGL, etc etc. My question is: what is so special about being a programmer under MAC OS? There is something that I have not seen? I also noticed that a significant portion of MAC users end up using their MAC like a normal Windows PC with Parallels or something like that. I can afford to buy a MAC, show me why this machine is so unique.

  Read the article

• probability of trouble-free upgrade

  - by intuited

  One of the problems with recommending Ubuntu to potential future users, especially those not particularly given to technical endeavours, is that there is a chance that upgrades will break their machine, and they'll have to pay or otherwise coerce some knowledgeable person into fixing them. In my limited experience of running successive versions of Ubuntu since 8-something on a couple of different laptops, this chance is quite high. I'm not sure if I'm just unlucky with the hardware that I'm using, or if it's a result of the higher-than-average number of packages I have installed, or if upgrades are just typically problematic. So I'd like to know the likelihood, for a casual user, of doing a release upgrade, for example from 10.04 to 10.10, without experiencing any regression bugs. Obviously this is dependent on the hardware that people are running. Canonical seems to be making some efforts towards collecting data on this, for example with the "I am affected by this bug" checkbox on their issue tracker, and with the laptop compatibility reports, but I've not seen anything comprehensive. I'm hoping for an objective reference here, for example a study carried out by relatively unbiased individuals. However, anecdotal evidence is probably useful too.

  Read the article

• Can a company use VPN to spy on me?

  - by orokusaki

  I'm about to work with a company on a development project, but they first need to set up a pretty complicated environment, and suggested they use VPN to work on my machine to do this. Should I be concerned that somebody can just watch me work? It would be embarrassing, if somebody could witness my work habits (e.g. Asking questions on SO and researching all day is part of my daily work regiment, and makes me feel like a noob, but it keeps me sharp. I also listen to conspiracy videos all day, and RadioLab podcasts, :). Is VPN going to introduce this possibility, and if so, is there a way around it? EDIT: Also, is there a way I can always tell when somebody is VPNed into my computer?

  Read the article

• Distributed computing for a company? Is there such a 'free' thing?

  - by Jakub

  I am new to the whole distributed computing / cloud thing. But I had an idea at work for our multimedia stuff like movie encoding / cpu intensive things tasks (which sometimes take a few hours). Is there a 'free' (linux?) way to go about using a Windows machine, and offsetting those cpu cycles for that task to say 10 servers that are generally idle (cpu wise)? I'm just curious if there is a way to do this or am I just grasping at straws here. My thought is that a 'cloud' setup would achieve this, however like I stated initially, I am a total newbie when it comes to it. This is just an idea, looking for some thoughts? Anyone achieve this?

  Read the article

• VirtualBox in production?

  - by MrG

  I'm planning to move a service which is currently powered by Debian into a VirtualBox. That would allow us to easily port it i.e. to a faster machine if required. The setup would be: debian host > Virtual Box #1 > debian instance #1 running Apache & application > Virtual Box #2 > debian instance #2 containing database Do you have any experience with a production setup based on Virtual Box? Is it stable and fast enough? Many thanks!

  Read the article

• Should I upgrade my VPS to a dedicated host?

  - by Mr. Hedgehog

  I've been running a website for 4 months now and in that time, it has grown from a few hundred unique visits/day to about 30,000 unique visits/day. I have been on Linode the whole time and have steadily upgraded to a 4GB node. Unfortunately, my app is very MySQL heavy and even with caching, the server is frequently ceasing to respond in peak times. During these times, all 4 cores are maxed on the machine (though Linode 4GB only provides a 1/5 share of the CPU). The only way to get it running again is to restart MySQL. I don't really know what to do. I have tried optimising the InnoDB settings and it seems to not be helping. Would moving to a Dedicated host be a good solution? I can get 4-5x the power of my node for a similar price - and with decent providers too.

  Read the article

• Today in the OTN Lounge (Tuesday October 2, 2012)

  - by Bob Rhubart

  Here's a quick rundown of today's activities in the OTN Lounge:   (OTN Lounge hours today: 8:00 am - 7:00 pm) 9:00 am - 1:00 pm RAC Attack Learn about Oracle Real Application Clustering (RAC) in this collaborative event. You'll work with experts from the IOUG RAC SIG to get an Oracle Database 11gR2 RAC cluster running inside a virtual machine. For more information: RAC attack at Oracle Open World (Pythian Blog) RAC Attack - Oracle Cluster Database at Home/Events (WikiBooks) 4:30 pm - 8:00 pm Oracle Social Network Developer Challenge Office Hours Find information, expertise, and a collaborative work environment for those participating in the OSN Developer Challenge. Click here for more information. 4:30 pm - 6:00 pm Oracle Database / Oracle Fusion Middleware Tweet Meet Free as in beer! Oracle Database and Oracle Fusion Middleware tweeters, gather in the OTN Lounge for refreshments and conversation with fellow tweeters and Oracle Database and Middleware experts. The OTN Lounge is located in the Howard St. Tent, between 3rd and 4th, directly between Moscone North and Moscone South. Access to the OTN Lounge requires an Oracle OpenWorld or JavaOne conference badge.

  Read the article

• Request Tracker 4.x on Ubuntu 12.04

  - by rihatum

  I have a Ubuntu 12.04 server installed on my machine. I am trying to install request-tracker4. Here's what I have done so far : a) Installed request-tracker via "sudo apt-get install request-tracker4" b) I then tried configuring RT_SiteConfig.pm in /etc/request-tracker4 but then ran into problems in populating the MySQL database. c) I then did sudo dpkg-reconfigure request-tracker4 d) It solved my problems of not being able to populate / setup mysql etc. e) Now, I am trying to setup rt under www.mydomain.com/rt I have read various how-to's and bestpractical's own guides but I am not very much a expert in Apache configurations so stuck. My Current Ubuntu 12.04 server setup: Apache2, Fastcgi installed (checked in /etc/apache2/mods-enabled Web Server document root is default /var/www/ Web user www-data Question is : 1 ) Where and What shall I put in Apache configuration to start using RT via the web-interface ? I have seen two files in /etc/request-tracker4/ apache2-fastcgi.conf and apache2-fcgid.conf I even tried making a ln -s apache2-fastcgi.conf /etc/apache2/conf.d but when I tried opening that file in root while in the conf.d directory it said too many levels. Any request tracker experts on ubuntu ?:-) Your help will be very useful and appreciated Thanks Please let me know if you need further info !

  Read the article

• How can I secure Postgres for remote access when not in a private network?

  - by orokusaki

  I have a database server on a VMWare VM (Ubuntu 12.04.1 LTS server), and it just occurred to me that the server is accessible via the web, since the same physical server contains a VM that hosts public websites. My iptables in the database are such that only SSH traffic, loopback traffic, and TCP on port 5432 are allowed. I will only allow host access to the Postgres server from the IP of the other VM on the same physical machine. Does this seem sufficient for security, assuming there aren't gaping holes in my general OS configuration, or is Postgres one of those services that should never be web facing, (assuming there are some of "those"). Will I need to use hostssl instead of host in my pg_hba.conf, even though the data will travel only on my own network, presumably?

  Read the article

• HP Envy 14, Ubuntu 10.10 and trouble with the graphics cards

  - by Carsten Gehling

  A few days ago I bought a HP Envy 14, containing 2 graphics card: An integrated Intel graphics card, and an ATI HD 5650. I've installed Ubuntu 10.10 32-bit on the machine. Most things work fine out of the box, but the graphics cards are giving me trouble. When booting, I get the message "failed to get i915 symbols, graphics turbo disabled". Then the screen blanks out during the remaining boot period. I am able to get the display working by changing to one of the consoles, then closing and opening the laptop's lid. It seems that Ubuntu gets confused about which card to use. I've read here: http://www.andreas-demmer.de/en/2010/07/18/testbericht-linux-auf-dem-hp-envy-14 that I should be able to turn off one the cards by echoing keywords into /sys/kernel/debug/vgaswitcheroo/switch, but that path is not available on my system. The BIOS does not have any methods to switch of the ATI card. Help anyone? /Carsten

  Read the article

• HP Envy 14, Ubuntu 10.10 and trouble with the graphics cards

  - by Carsten Gehling

  A few days ago I bought a HP Envy 14, containing 2 graphics card: An integrated Intel graphics card, and an ATI HD 5650. I've installed Ubuntu 10.10 32-bit on the machine. Most things work fine out of the box, but the graphics cards are giving me trouble. When booting, I get the message "failed to get i915 symbols, graphics turbo disabled". Then the screen blanks out during the remaining boot period. I am able to get the display working by changing to one of the consoles, then closing and opening the laptop's lid. It seems that Ubuntu gets confused about which card to use. I've read here: http://www.andreas-demmer.de/en/2010/07/18/testbericht-linux-auf-dem-hp-envy-14 that I should be able to turn off one the cards by echoing keywords into /sys/kernel/debug/vgaswitcheroo/switch, but that path is not available on my system. The BIOS does not have any methods to switch of the ATI card. Help anyone? /Carsten

  Read the article

• How to change 802.1x settings for Wireless in Windows XP SP3?

  - by mspoerr

  Hello, I want to configure EAP-TLS with Machine Authentication ONLY for a wireless network. The supplicant is the bulit-in supplicant in Windows XP SP3. I found the following document: http://support.microsoft.com/kb/929847 - How to enable computer-only authentication for a 802.1X-based network in Windows Vista, in Windows Server 2008, and in Windows XP Service Pack 3 But unforunately the needed command "netsh wlan" is not available in Windows XP - "Note Windows XP SP3 and earlier versions of Windows XP do not support the netsh wlan command." How can I change the settings without the "netsh wlan" command? Thanks, mspoerr

  Read the article

• How to forward external port to internal port using plink

  - by user857990

  For a penetration test where I have shell access to a computer running an old Windows, I'd like to forward port 4450 to 127.0.0.1:445 because the firewall is blocking 445 externally. I'm stuck on the following: plink -L 4450:127.0.0.1:445 SSH-Server According to the documentation I've found, I'd have to specify a SSH-Server. But all documentation I've found just uses an SSH-Server in the same network. To forward it to a localhost port, that wouldn't help. Do I have to install an SSH-Server on that machine or are there other ways?

  Read the article

• Visual Studio 2005 Open Project Dialog Slow as Molasses

  - by futureelite7

  Whenever I try to open a project in Visual Studio 2005 (Windows XP), my open project dialog become slow as molasses - navigating down one level of folders typically takes almost 60 seconds. Finding the project and opening it can take up 4-5 minutes, which is just ridiculous. I've checked the open project dialogs of other programs - only VS2005 is acting this way. What could be causing this problem and how do I go about solving it (apart from reinstalling VS2005 / windows) (Edit: Even VS2008 on the same machine does not have this problem. I don't know what's wrong.) Thanks!

  Read the article

• STOP: c000021a {Fatal System Error} The initial session process or system process terminated unexpectedly

  - by christof

  I'm encountering such an error after expanding disk space on a virtual machine using Hyper-V. STOP: c000021a {Fatal System Error} The initial session process or system process terminated unexpectedly with a status of (0x00000000) (0xc000012d 0x001003f0). The virtual server there is Windows Server 2008 R2 Enterprise Edition, which is also Domain Controller. I've tried to repair Windows but there is no restore point, and using the command line. I've tried the sfc /SCANNOW /OFFBOOTDIR /OFFWINDIR command, but I got the error Windows Resource Protection could not perform the requested operation.

  Read the article

• How to create iso dvd image for use with Mac OS X's "Disk Utility"?

  - by adolf garlic

  This seemed way easier on my pc. I would just pop a blank dvd in the drive, it asked what I wanted to do with it, to which I would respond, "burn dvd with nero" (paraphrasing), then I would pick "new" and just drag and drop the folders in there. Mac appears to have "Disk Utility" which just requires that I 'choose an image' but then doesn't bother to detail: how to do this what the options mean e.g. format "Mac OS Extended (Journaled)" is that ever going to be readable on a non Mac machine? I want to create an ISO standard DVD as per the 'default' you'd get on nero. All the stuff on the web points to doing things with 'Terminal' (the whole point of buying a Mac was to get away from command line jiggery pokery - I'm trying to burn some photos not land a friggin lunar module here!) Please, if you can just provide some simple instructions on what I need to achive this I'd be extremely grateful. Ta muchley in advance.

  Read the article

• Client backup solution for small (100-150 user) homogenous win/nix/mac office?

  - by Gomibushi

  We are currently using Symantec Backup Exec with Desktop and Laptop Option for our Windows clients, time machine for mac and offer simple rsync to linux users, in addition to home folders that are always backed up and available. We are not overly happy with the horrid complexity and multitude of minor bugs in SBE, but "when you don't touch it, it mostly works". Ideally we'd like to offer a real and full backup solution to all clients, but mostly to Linux users, as they don't have a good alternative. I have barely tested Druva on windows, and it is promising in its simplicity and "it just works" looks, but does anyone have experience with it? This post lists some that I will look at.

  Read the article

• How to better integrate a unix development environment into Windows

  - by SKenz

  I'm mostly a Windows user but I do most of my development (essentially web development) using unix tools and software. I've been going back and forth between using a dedicated lubuntu virtual machine on Virtualbox and using some tools directly in windows (msgit, python, django), but none of these approaches is entirely satisfactory. I'd like to hear of ways other devs use to better integrate a unix workflow into windows. For instance tighter integration between a linux and vm and windows. The vagrant demo showed how a VM could work off of a windows project folder and I found that nice. I'd like to hear of other tools and tips that would help mimic the workflow one can find on OS X (of course I understand that it cannot be as tightly integrated on Windows as it doesn't have the same unix underpinnings). PS: I have tried cygwin as well EDIT for clarifications about What I find lacking (thanks to axblount for pointing that out) : unix tools like msys et al do not work as well as their native unic counterparts. Many scripts, installers require further configuration or do not work at all. For instance getting virtualenvwrapper to work is not very straightforward. virtualbox: ideally I would like to use windows software (photoshop, sublime text 2) seamlessly with linux. I mostly use a FTP client atm to move over files edited on the windows side which is a tedious process.

  Read the article

• External USB Fingerprint Reader for Pre-boot Authentication for Dell Laptop

  - by cop1152

  My company just purchased several Dell Latitude E6500 laptops with docking stations and external monitors. These laptops have a fingerprint scanner located next to the keyboard. DOCKED users who prefer to use the included fingerprint scanner for pre-boot authentication are forced to open their laptop in order to access the scanner. This is an inconvenience when the laptop is docked. We are looking for an external, usb fingerprint scanner, that will work with the current preboot authentication setup. I assume that this scanner would have to access the existing credentials for authentication....wherever they are stored. So we would require something that would work PRE-BOOT, use the existing credentials, and not interfere with usage when the machine was not docked, such as when the laptop is being used at home. Does anyone have experience with this scenario? Thanks.

  Read the article

• How does one extract the Canon ip4600 drivers in inf form?

  - by Trix

  I have a x64 machine which needs "additional drivers" for x86 clients. The problem I have is I cannot get the proper .inf files so I can use them. Canon only provides an .exe file, which when extracted has other .exe files and some dll files. I believe Canon changed their drivers, because I did have them extracted at one point, but sadly did not save them :(. The drivers are available here. Hopefully I am clear in what I am trying to do. Canon provides the .exe file. The .exe file when extracted does not produce any .inf driver files. Thanks!

  Read the article

• Vista x64: Improving troubleshoot approach skills

  - by Chau

  I'm not a Windows SuperUser, but neither just the regular user. I don't mind browsing the Registry, using Process Explorer, reading the Event logs, (un)installing new drivers and so on, but all this only makes me solve some problems. I tend though to run into problems where these tools aren't enough. Which tools should I learn about to improve my troubleshooting skills in Windows? Currently I'm using Windows Vista x64 (not moved to 7 yet), facing audio/video stuttering problems and I think this is a good place to improve my troubleshooting skills. I know this post is similar to this question, but my machine is only hanging occationally. Specs: Intel Q6600 Stock speed ASUS P5QD Turbo 4GB ram NVIDIA GTS-8800 640 HDA Xplosion 7.1 Seasonic 430W Windows Vista Business x64

  Read the article

• Using a Raspberry Pi as a VPN?

  - by sudo rm -rf

  So I'm sure many of you have heard of the new Raspberry Pi project. I was looking at messing around with Model B, which has the following relevant specs: Broadcom BCM2835 700MHz ARM1176JZFS processor with FPU and Videocore 4 GPU 256MB RAM Boots from SD card, running the Fedora version of Linux (ARM Version) 10/100 BaseT Ethernet socket USB 2.0 socket So I was curious if it would be possible to create a simple VPN out of this little machine. I do realize that since it's an ARM processor that might mess up quite a few things. Any ideas if this is possible? Just for what it's worth, this would be a personal project so I'm not worried about performance.

  Read the article

• How can I configure Firefox to assume I have less memory?

  - by WoLpH

  Firefox has a few different settings that automatically get tuned based on the system ram. This is all great if you're running nothing besides Firefox, but when you're running half a dozen apps at the same time and they all assume that they can take a decent chunk of mem it just kills the box. Example settings: http://kb.mozillazine.org/Browser.sessionhistory.max_total_viewers http://kb.mozillazine.org/Browser.cache.memory.capacity How can I make Firefox automatically configure all these settings with the assumption that I only have 512MB of memory instead of 4GB (or whatever number, but you get the idea). I am running Ubuntu 12.04 with Firefox 14 Current workarounds: Running a Windows XP virtual machine with 512MB of ram. It actually runs smooth and takes less memory (including Windows) to run than having Firefox (or Chrome for that matter) run standalone. Install the 32 bit version of Firefox By installing the 32 bit version of firefox (apt-get install firefox:i386) the base memory usage is only about 50% of what it is with the 64 bit.

  Read the article

< Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >