Search Results

Search found 21268 results on 851 pages for 'null route'.

Page 454/851 | < Previous Page | 450 451 452 453 454 455 456 457 458 459 460 461  | Next Page >

  • Cisco IOS ACL: Don't permit incoming connections just because they are from port 80

    - by cjavapro
    I am going much based on my memory and I may not be correct on all of this. On a Cisco 851 (IOS) that uses a BVI or a bridge-route (the servers on the inside are configured with static and public IP addresses). I would apply two access lists (both end with deny ip any any log) on FastEthernet4 (the WAN port). There would be one for FA4 in and another for FA4 out. FA4 out would have a line like access-list 110 permit 98.76.54.0 0.0.0.255 gt 1023 any eq http I think this means from 98.76.54.* with a from port of at least 1024 can connect to any other machine with a destination port 80. So, then I have to allow the response to the HTTP connection. FA4 in would have a line like access-list 120 permit any eq http 98.76.54.0 0.0.0.255 gt 1023 Now the problem with that is that anybody on the outside can set their from port to port 80 and then connect to any inside port that is at least 1024. How do we prevent this and require the incoming data to be a response to the outgoing data.

    Read the article

  • Client cannot access my IIS7 web server

    - by Soccerwiz
    I have a Windows 2008 web server on running IIS 7 with about 25 websites. One of those sites is an SaaS application that is accessed constantly throughout the day. However, one particular client keeps getting blocked from my server. They will be using the service, and then all of a sudden they cannot access the program, or any other site on the server. The entire office of 4 users is blocked from accessing anything on the web server. A trace route reveals they get all the way to the server before they are blocked. However, they can access a linux server that is a different VM with a different IP on the same physical server. Also, when they are blocked from their office, they can still access the site from their mobile phone or local Starbucks. They can also occasionally reset the router and gain access to the web server again as they are on a dynamic IP address. I checked IIS and allow all IPs to access the server. There is nothing in the logs the says anything about a user being banned. I really have no idea what is causing this? Could it be a virus on their end? I have even moved the SaaS to a completely new server in a different location, and they were working fine for about a month, and then the problem started occurring again. Are there any hidden blacklists in IIS? Or is it a routing issue on their end?

    Read the article

  • OpenVPN server will not redirect traffic

    - by skerit
    I set up an OpenVPN server on my VPS, using this guide: http://vpsnoc.com/blog/how-to-install-openvpn-on-a-debianubuntu-vps-instantly/ And I can connect to it without problems. Connect, that is, because no traffic is being redirected. When I try to load a webpage when connected to the vpn I just get an error. This is the config file it generated: dev tun server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt ca ca.crt cert server.crt key server.key dh dh1024.pem push "route 10.8.0.0 255.255.255.0" push "redirect-gateway" comp-lzo keepalive 10 60 ping-timer-rem persist-tun persist-key group daemon daemon This is my iptables.conf # Generated by iptables-save v1.4.4 on Sat May 7 13:09:44 2011 *raw :PREROUTING ACCEPT [37938267:10998335127] :OUTPUT ACCEPT [35616847:14165347907] COMMIT # Completed on Sat May 7 13:09:44 2011 # Generated by iptables-save v1.4.4 on Sat May 7 13:09:44 2011 *nat :PREROUTING ACCEPT [794948:91051460] :POSTROUTING ACCEPT [1603974:108147033] :OUTPUT ACCEPT [1603974:108147033] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth1 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o venet0 -j MASQUERADE COMMIT # Completed on Sat May 7 13:09:44 2011 # Generated by iptables-save v1.4.4 on Sat May 7 13:09:44 2011 *mangle :PREROUTING ACCEPT [37938267:10998335127] :INPUT ACCEPT [37677226:10960834925] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [35616847:14165347907] :POSTROUTING ACCEPT [35680187:14169930490] COMMIT # Completed on Sat May 7 13:09:44 2011 # Generated by iptables-save v1.4.4 on Sat May 7 13:09:44 2011 *filter :INPUT ACCEPT [37677226:10960834925] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [35616848:14165347947] -A INPUT -i eth0 -j LOG --log-prefix "BANDWIDTH_IN:" --log-level 7 -A FORWARD -o eth0 -j LOG --log-prefix "BANDWIDTH_OUT:" --log-level 7 -A FORWARD -i eth0 -j LOG --log-prefix "BANDWIDTH_IN:" --log-level 7 -A OUTPUT -o eth0 -j LOG --log-prefix "BANDWIDTH_OUT:" --log-level 7 COMMIT # Completed on Sat May 7 13:09:44 2011

    Read the article

  • Une banque est la risée des hackers et du web, suite à sa manière particulière de se prémunir des in

    Une banque est la risée des hackers et du web, suite à sa manière particulière de se prémunir des injections SQL Une banque californienne a une manière bien particulière de se protéger des attaques par injection SQL. Dans la FAQ de son site, l'établissement demande à ses clients de ne pas utiliser les mots suivants (comme réponse à leur question secrète) : insert, delete, drop, update, null et select. Cette information a été découverte le 14 mai et depuis, elle a fait le tour du web, suscitant de grands fous rires dans la communautés des amateurs et professionnels de la sécurité informatique. Depuis hier, la FAQ n'est plus en ligne mais, fort heureusement, nous disposons d'une capture d'écran de ce qui avait été publié :

    Read the article

  • Monitor attached to motherboard is out of frequency

    - by Neilvert Noval
    I don't know if this is appropriate to ask it here in superuser. Please, just route this to appropriate stackexchange site if found unrelevant. Here's my scenario. I have bought a new motherboard (MSI 785GT-E63). I already have an old CRT monitor connected to it. After I install a linux OS to it, my monitor will display that it is: Out of frequency. Current frequency is 89Hz. The operating output of my monitor is (around) 60-70Hz. I would like to get this thing work. How can I let my CRT display properly? I was thinking of lowering down video frequency output of my motherboard, but I can't find any settings on my BIOS setup. Additional info: My monitor is attached directly to the built-in video adaptor of my motherboard. (No additional video cards) Install of OS is complete without errors. Please help.

    Read the article

  • What may the reason of slowness be (see details in message body)?

    - by Ivan
    I've got a really weird situation I'm beating to solve. A performance problem which looks really like an empty waiting sequence set in code (while it probably isn't so). I've got a pretty powerful dedicated server (10 GB RAM, eight Xeon cores, etc) running Ubuntu 10.04 with all the functionality services (except OpenVPN server used to provide secure access to clients) deployed in separate VirtualBox (vboxheadless) machines (one for the company e-mail server, one for web server and one for accounting/crm server (Firebird + proprietary app server working with Delphi-made clients)). CPU load (as "top" says) is almost always near zero. Host system RAM is close to 100% usage but not overloaded (as very little swapping gets used, and freed (by stopping one of VMs) memory doesn't get reused any quickly). Approximately 50% of guests RAM is used. iostat usually shows near zero %util. Network bandwidth seems to be underused. But the accounting/crm client (a Win32 Delphi application run on WinXP machines) software works hell-slow with this server (and works much better using an inside-LAN Windows server). I just can't imagine what can make it be slow if there are so plenty of CPU, RAM, HDD and bandwidth resources available on clients and on the server even in their hardest moments. Saying bandwidth is underused I not only know that clients and the server are connected to the Internet with a bigger channels than really used (which leaves the a chance they may have a bottleneck of a sort on the route between them), I've tested bandwidth between clients and the server by copying files among them.

    Read the article

  • Using a Higher Precision (than 8-bit unsigned integer) Buffered Image for Heightmaps in Java

    - by pl12
    I am generating a heightmap for every quad in my quadtree in openCL. The way I was creating the image is as follows: DataBufferInt dataBuffer = (DataBufferInt)img.getRaster().getDataBuffer(); int data[] = dataBuffer.getData(); //img is a bufferedimage inputImageMem = CL.clCreateImage2D( context, CL_MEM_READ_WRITE | CL_MEM_USE_HOST_PTR, new cl_image_format[]{imageFormat}, size, size, size * Sizeof.cl_uint, Pointer.to(data), null); This works ok but the major issue is that as the quads get smaller and smaller the 8-bit format of the buffered image starts to cause intolerable "stepping" issues as seen below: I was wondering if there was an alternate way I could go about doing this? Thanks for the time.

    Read the article

  • Actionscript - Dropping Multiple Objects Using an Array?

    - by Eratosthenes
    I'm trying to get these fireBalls to drop more often, im not sure if im using Math.random correctly also, for some reason I'm getting a null reference because I think the fireBalls array waits for one to leave the stage before dropping another one? this is the relevant code: var sun:Sun=new Sun var fireBalls:Array=new Array() var left:Boolean; function onEnterFrame(event:Event){ if (left) { sun.x = sun.x - 15; }else{ sun.x = sun.x + 15; } if (fireBalls.length>0&&fireBalls[0].y>stage.stageHeight){ // Fireballs exit stage removeChild(fireBalls[0]); fireBalls.shift(); } for (var j:int=0; j<fireBalls.length; j++){ fireBalls[j].y=fireBalls[j].y+15; if (fireBalls[j].y>stage.stageHeight-fireBall.width/2){ } } if (Math.random()<.2){ // Fireballs shooting from Sun var fireBall:FireBall=new FireBall; fireBall.x=sun.x; addChild(fireBall); fireBalls.push(fireBall); } }

    Read the article

  • Links in my site have been hacked

    - by Funky
    In my site I prefix the images and links with the domain of the site for better SEO using the code below: public static string GetHTTPHost() { string host = ""; if (HttpContext.Current.Request["HTTP_HOST"] != null) host = HttpContext.Current.Request["HTTP_HOST"]; if (host == "site.co.uk" || host == "site.com") { return "http://www." + host; } return "http://"+ host; } This works great, but for some reason, lots of links have now changed to http://www.baidu.com/... There is no sign of this in any of the code or project, the files on the server also have a change date when i last did the publish at 11 yesterday, so all the files on there look fine. I am using ASP.net and Umbraco 4.7.2 Does anyone have any ideas? thanks

    Read the article

  • SNMP query - operation not permitted

    - by jperovic
    I am working on API that reads a lot of data via SNMP (routes, interfaces, QoS policies, etc...). Lately, I have experienced a random error stating: Operation not permitted Now, I use SNMP4J as core library and cannot really pinpoint the source of error. Some Stackoverflow questions have suggested OS being unable to open sufficient number of file handles but increasing that parameter did not help much. The strange thing is that error occurs only when iptables is up and running. Could it be that firewall is blocking some traffic? I have tried writing JUnit test that mimicked application's logic but no errors were fired... Any help would be appreciated! Thanks! IPTABLES *nat :PREROUTING ACCEPT [2:96] :POSTROUTING ACCEPT [68:4218] :OUTPUT ACCEPT [68:4218] # route redirect za SNMP Trap i syslog -A PREROUTING -i eth0 -p udp -m udp --dport 514 -j REDIRECT --to-ports 33514 -A PREROUTING -i eth0 -p udp -m udp --dport 162 -j REDIRECT --to-ports 33162 COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT ..... # SNMP -A INPUT -p udp -m state --state NEW -m udp --dport 161 -j ACCEPT # SNMP trap -A INPUT -p udp -m state --state NEW -m udp --dport 162 -j ACCEPT -A INPUT -p udp -m state --state NEW -m udp --dport 33162 -j ACCEPT ..... -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT

    Read the article

  • Switch between network configurations via command line in fedora 17

    - by Mike Fairhurst
    I have two different setups I use on my work laptop; one enables synergy over an ethernet ssh tunnel with my work computer on the local network, and the other opens an HTTP tunnel to my work computer from outside the network. When I have wifi enabled at work, my laptop seems to use it by preference. This makes synergy run incredibly slowly. At home I must use wifi. I have scripts that begin my ssh tunnels, add my ssh keys, and starts up other programs like synergy, and close themselves when I shut my laptop. However, every day I have to start out my routine by opening my gnome-control-center and turning on my ethernet. I have tried route add and ifup, none of it works, so I dove into gnome-control-center's source code and found that it enabled the connection by libnm's method nm_client_activate_connection with some libnm specific structs that I am having trouble tracking down. I'm not much of a c programmer, and I'm not familiar with either GTK or libnm. Does anybody know what fedora 17 does with ethernet connections to fully enable them? Or does anybody know what libnm does to fully enable an ethernet connection? Do I have to write a c script to run libnm for me to fully emulate whatever gnome-control-center is trying to do?

    Read the article

  • What is the correct way to reset and load new data into GL_ARRAY_BUFFER?

    - by Geto
    I am using an array buffer for colors data. If I want to load different colors for the current mesh in real time what is the correct way to do it. At the moment I am doing: glBindVertexArray(vao); glBindBuffer(GL_ARRAY_BUFFER, colorBuffer); glBufferData(GL_ARRAY_BUFFER, SIZE, colorsData, GL_STATIC_DRAW); glEnableVertexAttribArray(shader->attrib("color")); glVertexAttribPointer(shader->attrib("color"), 3, GL_FLOAT, GL_TRUE, 0, NULL); glBindBuffer(GL_ARRAY_BUFFER, 0); It works, but I am not sure if this is good and efficient way to do it. What happens to the previous data ? Does it write on top of it ? Do I need to call : glDeleteBuffers(1, colorBuffer); glGenBuffers(1, colorBuffer); before transfering the new data into the buffer ?

    Read the article

  • Write depth buffer to texture

    - by innochenti
    I need to read depth buffer from GPU and write it to texture. How this can be done? Here is how texture for depth buffer is created: depthBufferDesc.Width = screenWidth; depthBufferDesc.Height = screenHeight; depthBufferDesc.MipLevels = 1; depthBufferDesc.ArraySize = 1; depthBufferDesc.Format = DXGI_FORMAT_D24_UNORM_S8_UINT; depthBufferDesc.SampleDesc.Count = 1; depthBufferDesc.SampleDesc.Quality = 0; depthBufferDesc.Usage = D3D10_USAGE_DEFAULT; depthBufferDesc.BindFlags = D3D10_BIND_DEPTH_STENCIL; depthBufferDesc.CPUAccessFlags = 0; depthBufferDesc.MiscFlags = 0; m_device->CreateTexture2D(&depthBufferDesc, NULL, m_depthStencilBuffer); Also, I've got another question: is it possible to bind depth buffer texture as sampler to the pixel shader?

    Read the article

  • Possible for linux bridge to intercept traffic?

    - by A G
    I have a linux machine setup as a bridge between a client and a server; brctl addbr0 brctl addif br0 eth1 brctl addif br0 eth2 ifconfig eth1 0.0.0.0 ifconfig eth2 0.0.0.0 ip link set br0 up I also have an application listening on port 8080 of this machine. Is it possible to have traffic destined for port 80 to be passed to my application? I have done some research and it looks like it could be done using ebtables and iptables. Here is the rest of my setup: //set the ebtables to pass this traffic up to ip for processing; DROP on the broute table should do this ebtables -t broute -A BROUTING -p ipv4 --ip-proto tcp --ip-dport 80 -j redirect --redirect-target DROP //set iptables to forward this traffic to my app listening on port 8080 iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY --on-port 8080 --tproxy-mark 1/1 iptables -t mangle -A PREROUTING -p tcp -j MARK --set-mark 1/1 //once the flows are marked, have them delivered locally via loopback interface ip rule add fwmark 1/1 table 1 ip route add local 0.0.0.0/0 dev lo table 1 //enable ip packet forwarding echo 1 > /proc/sys/net/ipv4/ip_forward However nothing is coming into my application. Am I missing anything? My understanding is that the target DROP on the broute BROUTING chain will push it up to be processed by iptables. Secondly, are there any other alternatives I should investigate? Edit: IPtables gets it at nat PREROUTING, but it looks like it drops after that; the INPUT chain (in either mangle or filter) doesn't see the packet.

    Read the article

  • Could replacing an old hard drive's circuit board make it work again?

    - by oscilatingcretin
    I have a 12-year-old, 10gb Maxtor drive that died on me around 7 years ago, but I have not had the heart to throw it away. When the computer powers on, it whirrs silently as it tries to spin up and then it stops. So, a few years ago, I sent it off for professional data recovery. They were able to retrieve quite a bit from it, but I know there's a bunch more there. It only cost $700, so I just chalked up the lackluster recovery effort to "you get what you pay for" considering that most companies will charge you several thousands of dollars for this kind of data recovery. When they sent the drive back, I couldn't help but plug it back in just to see if maybe they unjammed something in the process of disassembling/reassembling the drive. To my surprise, the drive had a much healthier spin-up sound and actually stayed spinning for several minutes before winding down to a halt. Windows is even able to detect and interact with the drive, but I get I/O errors after so many minutes of waiting for it to mount. Before I start doing stupid stuff with it like dropping it on the ground, freezing it, crapping on it, etc, I decided to buy the exact same model off Ebay so that I could swap the circuit boards as a last-ditch effort. While it's en route, I thought I'd come here to ask if this is even a worthwhile effort and, if even remotely so, what should I know before ripping off the old board and slapping on the new?

    Read the article

  • Empty Synchronized method in game loop

    - by Shijima
    I am studying the gameloop used in Replica Island to understand a bit about Android game development. The main loop has the below logic... GameThread.java (note the variable names in sample code dont match exact source code) while (!finished) { if (objectManager != null) { renderer.waitDrawingComplete(); //Do more gameloop stuff after drawing is complete... } } I was curious to see what waitDrawingComplete actually does, but found its just an empty syncrhonized method! I guess it does nothing, am I missing something here? GameRenderer.java line 328 public synchronized void waitDrawingComplete() { } Source code can be checked out here with SVN if you feel like having a look: https://code.google.com/p/replicaisland/source/checkout

    Read the article

  • What is this called?

    - by robertlewis2001
    I'm hoping there's a book or something out there for me to get... If I have a class that has Collection as an instance variable, what is that method of coding called? A design pattern? If so, where can I find more information on it? As I've been working with this mentor, he's really helped me understand my programming weakness and that weakness is thinking in terms of collections or relationships between objects. It just seems so difficult for me right now and I need to read to become smarter. My mentor is a great guy, but he gets frustrated when I start asking lots of questions, so I'm starting to feel like I need to learn more on my own. public class Evaluation { private List<Criterion> criterion = null; public Evaluation() { criterion = new List<Criterion>(); } }

    Read the article

  • Bitmap rotation jitter around pivot

    - by Manderin87
    I am working on a asteriods clone and I have the ship graphic loaded as a 96x96 bitmap. When the player rotates the ship I rotate the bitmap by degree (float). rotation function: if(m_Matrix == null) { m_Matrix = new Matrix(); } else { m_Matrix.reset(); } m_Matrix.setRotate(degree, m_BaseImage.getWidth() / 2, m_BaseImage.getHeight() / 2); m_RotatedImage = Bitmap.createBitmap(m_BaseImage, 0, 0, m_BaseImage.getWidth(), m_BaseImage.getHeight(), m_Matrix, true); draw function: m_Paint.setAntiAlias(true); m_Paint.setFilterBitmap(true); m_Paint.setDither(true); canvas.drawBitmap(m_RotatedImage, (int) posX - m_RotatedImage.getWidth() / 2, (int) posY - m_RotatedImage.getHeight() / 2, m_Paint); When the bitmap is drawn, the bitmap jitters slightly around the pivot. Can anyone fix or tell me why the bitmap is jittering around the pivot? It needs to be smooth.

    Read the article

  • C# Image Download

    - by Nouman Zakir
    A C# class that makes it easier to download images from the web. Use the following code in your program to download image files such as JPG, GIF, PNG, etc from the internet using WebClient class. using System;using System.Drawing;using System.Drawing.Imaging;using System.IO;using System.Net;public class DownloadImage { private string imageUrl; private Bitmap bitmap; public DownloadImage(string imageUrl) { this.imageUrl = imageUrl; } public void Download() { try { WebClient client = new WebClient(); Stream stream = client.OpenRead(imageUrl); bitmap = new Bitmap(stream); stream.Flush(); stream.Close(); } catch (Exception e) { Console.WriteLine(e.Message); } } public Bitmap GetImage() { return bitmap; } public void SaveImage(string filename, ImageFormat format) { if (bitmap != null) { bitmap.Save(filename, format); } }}

    Read the article

  • PHP potential issues with compiling 5.3.8 extensions against RHEL 6 / CentOS 6 PHP 5.3.3 package

    - by user101203
    I'm working on getting a Red Hat 6 LAMP server going and while the PHP that comes with it has many extensions we use, it doesn't have all of them. To solve this, I was thinking about either compiling the PHP extensions which come in the ext folder of the downloadable source code of PHP 5.3.3 from php.net same as #1, but using the extensions from the latest PHP version (currently 5.3.8). Do #1 but manually decide which updates to backport from the latest version of the PHP extensions into the older version and then compile the backported result A drawback to #1 is that security and bug fixes come out which we wouldn't be able to take advantage of. A drawback to #3 is that it might be a lot of work Does anyone know what the drawbacks to #2 are? I don't want to go down that route if it might result in some unexpected negative outcomes. Also, are there any other drawbacks to the other options or a better way to go altogether? I want to use the PHP 5.3.3 which comes with the Linux distro because I don't want us to get to a place again where we are forced to upgrade to a new version of PHP to stay on top of security updates like from PHP 5.2.x to 5.3.x and there be backwards incompatible changes (this is the situation we're in now with PHP 5.2.x no longer being supported).

    Read the article

  • Hangs on Splash Screen after login (auto-login), how can I fix this?

    - by Davious
    Computer: Toshiba Terca A4 OS: Ubuntu Desktop 10.10 After installing 10.10, the splash screen hangs and the mouse pointer appears. Anyone know what I can do to fix this? ~/.xsession-errors has (nautilus:3190): GConf-CRITICAL **: gconf_value_free: assertion `value != NULL' failed btw, Safe-mode works: I do a Ctrl-Alt-F1 into a command prompt session and run ps aux | grep slave then sudo kill [id of gdm-simple-slave] That killed the session and allowed me to login in safe-mode. Safe-mode works. Then I open a terminal and run ps aux | grep nm- sudo kill -9 [id of nm-applet] nm-applet --sm-disable & to get my internet connection up.

    Read the article

  • Centos VM serving multiple public IP: how to configure network interface?

    - by Glasnhost
    I have a Centos 5.6 VM (Vsphere client) already responding to two different public IPs on eth0 and eth0:1 and I'm trying to add eth0:2. I copied the eth0 config file and restarted the network service. I don't understand which other steps are needed... ifconfig eth0 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.10 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:163371837 errors:77 dropped:0 overruns:0 frame:0 TX packets:168210961 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1891221045 (1.7 GiB) TX bytes:855899500 (816.2 MiB) Interrupt:59 Base address:0x2000 eth0:1 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.11 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:59 Base address:0x2000 eth0:2 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.12 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:59 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:188976973 errors:0 dropped:0 overruns:0 frame:0 TX packets:188976973 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2015642664 (1.8 GiB) TX bytes:2015642664 (1.8 GiB) more /etc/resolv.conf nameserver 10.1.12.1 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.1.12.1 0.0.0.0 UG 0 0 0 eth0

    Read the article

  • Windows 7 'Unidentified Network'

    - by Throdne
    So my internet was working last night before I went to bed and woke up to a computer that is showing unidentified network. I have tried multiple ways of fixing it. > route delete 0.0.0.0 > uninstalling drivers - restart - reinstall from downloaded drivers > ipconfig /release - /renew > static IP > speed & duplex from auto negotiation to 1.0gbps full duplex > and also changed my network address to no value to 1234567890ab (not in that order) nothing seems to work. I have Comcast internet and when I connect the computer to the modem it works perfectly. but when I connect it to my router again, Unidentified network. I know my router isn't faulty, because my macbook pro, server, NAS, iPhones, and iPads are still working. I have also tried moving the port on the router, still same problem. my router is a: Cisco Small Business RVS4000 motherboard: GIGABYTE GA-990FXA-UD3

    Read the article

  • Encrypt images before uploading to Dropbox [migrated]

    - by Cherry
    I want to encrypt a file first before the file will be uploaded to the dropbox. So i have implement the encryption inside the uploading of the codes. However, there is an error after i integrate the codes together. Where did my mistake go wrong? Error at putFileOverwriteRequest and it says The method putFileOverwriteRequest(String, InputStream, long, ProgressListener) in the type DropboxAPI is not applicable for the arguments (String, FileOutputStream, long, new ProgressListener(){}) Another problem is that this FileOutputStream fis = new FileOutputStream(new File("dont know what to put in this field")); i do not know where to put the file so that after i read the file, it will call the path and then upload to the Dropbox. Anyone is kind to help me in this? As time is running out for me and i still cant solve the problem. Thank you in advance. The full code is as below. public class UploadPicture extends AsyncTask<Void, Long, Boolean> { private DropboxAPI<?> mApi; private String mPath; private File mFile; private long mFileLen; private UploadRequest mRequest; private Context mContext; private final ProgressDialog mDialog; private String mErrorMsg; public UploadPicture(Context context, DropboxAPI<?> api, String dropboxPath, File file) { // We set the context this way so we don't accidentally leak activities mContext = context.getApplicationContext(); mFileLen = file.length(); mApi = api; mPath = dropboxPath; mFile = file; mDialog = new ProgressDialog(context); mDialog.setMax(100); mDialog.setMessage("Uploading " + file.getName()); mDialog.setProgressStyle(ProgressDialog.STYLE_HORIZONTAL); mDialog.setProgress(0); mDialog.setButton("Cancel", new OnClickListener() { public void onClick(DialogInterface dialog, int which) { // This will cancel the putFile operation mRequest.abort(); } }); mDialog.show(); } @Override protected Boolean doInBackground(Void... params) { try { KeyGenerator keygen = KeyGenerator.getInstance("DES"); SecretKey key = keygen.generateKey(); //generate key //encrypt file here first byte[] plainData; byte[] encryptedData; Cipher cipher = Cipher.getInstance("DES/ECB/PKCS5Padding"); cipher.init(Cipher.ENCRYPT_MODE, key); //File f = new File(mFile); //read file FileInputStream in = new FileInputStream(mFile); //obtains input bytes from a file plainData = new byte[(int)mFile.length()]; in.read(plainData); //Read bytes of data into an array of bytes encryptedData = cipher.doFinal(plainData); //encrypt data FileOutputStream fis = new FileOutputStream(new File("dont know what to put in this field")); //upload to a path first then call the path so that it can be uploaded up to the dropbox //save encrypted file to dropbox // By creating a request, we get a handle to the putFile operation, // so we can cancel it later if we want to //FileInputStream fis = new FileInputStream(mFile); String path = mPath + mFile.getName(); mRequest = mApi.putFileOverwriteRequest(path, fis, mFile.length(), new ProgressListener() { @Override public long progressInterval() { // Update the progress bar every half-second or so return 500; } @Override public void onProgress(long bytes, long total) { publishProgress(bytes); } }); if (mRequest != null) { mRequest.upload(); return true; } } catch (DropboxUnlinkedException e) { // This session wasn't authenticated properly or user unlinked mErrorMsg = "This app wasn't authenticated properly."; } catch (DropboxFileSizeException e) { // File size too big to upload via the API mErrorMsg = "This file is too big to upload"; } catch (DropboxPartialFileException e) { // We canceled the operation mErrorMsg = "Upload canceled"; } catch (DropboxServerException e) { // Server-side exception. These are examples of what could happen, // but we don't do anything special with them here. if (e.error == DropboxServerException._401_UNAUTHORIZED) { // Unauthorized, so we should unlink them. You may want to // automatically log the user out in this case. } else if (e.error == DropboxServerException._403_FORBIDDEN) { // Not allowed to access this } else if (e.error == DropboxServerException._404_NOT_FOUND) { // path not found (or if it was the thumbnail, can't be // thumbnailed) } else if (e.error == DropboxServerException._507_INSUFFICIENT_STORAGE) { // user is over quota } else { // Something else } // This gets the Dropbox error, translated into the user's language mErrorMsg = e.body.userError; if (mErrorMsg == null) { mErrorMsg = e.body.error; } } catch (DropboxIOException e) { // Happens all the time, probably want to retry automatically. mErrorMsg = "Network error. Try again."; } catch (DropboxParseException e) { // Probably due to Dropbox server restarting, should retry mErrorMsg = "Dropbox error. Try again."; } catch (DropboxException e) { // Unknown error mErrorMsg = "Unknown error. Try again."; } catch (FileNotFoundException e) { } return false; } @Override protected void onProgressUpdate(Long... progress) { int percent = (int)(100.0*(double)progress[0]/mFileLen + 0.5); mDialog.setProgress(percent); } @Override protected void onPostExecute(Boolean result) { mDialog.dismiss(); if (result) { showToast("Image successfully uploaded"); } else { showToast(mErrorMsg); } } private void showToast(String msg) { Toast error = Toast.makeText(mContext, msg, Toast.LENGTH_LONG); error.show(); } }

    Read the article

  • linux networking: how to redirect incoming connections from old server to new server?

    - by aliz
    hi I'm in the process of moving my old server to a new server, but i will keep the old server running for database replication and load balancing, etc. each server has a separate internet connection with a static ip, and they are connected through a local Ethernet connection. I've got Ubuntu 8.04 32-bit running on old server and Debian 6.0 64-bit on new one. shorewall firewall is installed on both servers. there are some outdoor devices which are periodically sending data to port 43597 for old server IP address. I can run multiple instances of the network service which is responsible for receiving data from devices on a server but on different ports. here's the question: how can I run the service on new server and have connections coming to old server redirected to it, and new devices can still connect to new server's IP address preferably on the same port and same service? until all devices get updated to send to new server. I've tried a shorewall DNAT rule, but seems like new server's default route should be changed to ethernet connection, which breaks other things. I also found about redir utility, but still haven't tried it. is there any best practice or simple solution for such a scenario, i'm not aware of? thanks in advance.

    Read the article

< Previous Page | 450 451 452 453 454 455 456 457 458 459 460 461  | Next Page >