Search Results

Search found 17650 results on 706 pages for 'chrome browser'.

Page 455/706 | < Previous Page | 451 452 453 454 455 456 457 458 459 460 461 462  | Next Page >

• x11vnc is slow, but using only 10% of available bandwidth

  - by mmm

  I am using x11vnc over 15Mbit/s network with 20ms latency. When the screen is changing a lot x11vnc is slow - for example when I switch a tab in a browser, it takes almost two seconds until the view is fully redrawn. The strange thing is that max connection speed of x11vnc is even during slow redrawing only about 10% of the available bandwidth. Why is x11vnc not using available bandwidth to speed the redrawing up? For example scp is using 100% of available bandwidth without problems. How can I identify what is the bottleneck for x11vnc on my system? So far I think: 10% network usage = network is not a bottleneck fb read rate: 601 MB/sec = reading fb is not a bottleneck Any ideas how can I further profile x11vnc and find out what is causing a slowdown? For example is there any switch for x11vnc to show how much data it is handling and how long it takes to grab a screen, process and compress it and send it over the network?

  Read the article

• Troubles logging into VPN on Win7 64bit

  - by mike

  Hi, Before I can successfully logon to my company's VPN it runs a small check in the browser to check my current processes. One of the things it checks (among other things) is to see if you have an antivirus running. If you don't, you can't connect and it says please install one with a couple links to some free ones. The issue I'm having is I recently upgraded to Win7 x64 and I haven't been able to get past the "antivirus check" part. Before, I had AVG running and I never had a single problem for years. Now I tried both AVG and Avast and I still get blocked. Does it have something to do with both of these antiviruses running in *32 mode in the processes? Any help or ideas on how to fix this would be awesome. Thanks!

  Read the article

• Linux Flash Player with 2 Monitors: always full-screen on primary monitor

  - by CarlF

  My setup at home uses a laptop, with a larger external monitor in addition to the built-in LCD panel, which is primary. I can see the larger monitor from the rest of the room and use it as my TV, for playing DVDs and various types of web video. However, it isn't ideal for Flash video. For instance, if I watch a video from Hulu or any other Flash-based site, I can expand it to full-screen mode. However, no matter which monitor the browser window is on, the full-screen mode is always on the laptop LCD panel, which is both too small and not visible from most of the room. Does anyone know of a way to force the Flash video to play full-screen on the monitor I select instead of the primary? My video chipset is NVidia, using kernel 2.6.31 (Ubuntu). Thanks.

  Read the article

• Nginx user subdomains, should I proxy_pass?

  - by Kevin L.

  I am trying to setup user subdomains, serving content from specific folders: www.example.com/username served from username.example.com (just like github pages). I've looked at Nginx rewrites, but I don't want the browser to redirect--I want the domain to be username.example.com. Anyway, a comment on this question says that I cannot rewrite host, only proxy to it. I tried to setup a proxy_pass, but all of the documentation and examples show it being used to (obviously) proxy to a service on another host or port, but in my case I want to just proxy to another location on the same host and port. Is this the appropriate way to tackle this problem, and if so, what is the right Nginx config syntax?

  Read the article

• display internet usage agreement before users can use internet

  - by Force Flow

  I was looking for a way to display a usage agreement page in browsers that users must agree to before they are allowed to access the internet. This would be for users on public computers and public/open wifi. I'm using a sonicwall firewall which does support this feature, however, there is a rediculously low character limit which makes it impractical to use. I thought about setting the browser's homepage to a usage agreement page, but that can easily be bypassed by navigating to somewhere else. Are there any other approaches that may be worth considering? There is currently no server in place on the public network, though I can set one up if need be.

  Read the article

• Present a form to user on Windows login

  - by Keyslinger

  I have a public computer lab where users must give a few short details about themselves such as their age and objective before they use the computers. Currently this information is gathered by a lab attendant on paper. I would like for the user to be given a form in Windows at the beginning of his or her session on a computer in the lab. It should be impossible to use the computer without filling out and submitting this form. I am confident in my abilities as a web application developer and I would prefer to collect the data in some sort of browser-based form. How do I present it to the user and lock them out of Windows until it has been submitted?

  Read the article

• procfs and youtube flash video

  - by trideceth12

  Up until recently (about 3 months ago), ALL open flash videos had deleted file handles in the procfs virtual folder for the flash plugin, I could see them thus: ps x|grep flash cd /proc/#PROCESS#/fd ls -l cp #FILE# ~/ This still works for the vast majority of flash video, but some YouTube videos no longer keep this open file handle. My questions are: A) Why not? B) Where are these files now stored? C) How can I get this file Yes I know I could probably get a browser plugin, it just annoys me that they are hiding these files so I want to keep doing it the hard way.

  Read the article

• Remote servlet by mod_jk ?

  - by marioosh.net

  I have remote servlet for example: h*tps://[ip_address]/servlet (h*tps://[ip_address]/ - Tomcat main page) that i need to configure on local Apache HTTPd server. My mod_jk configuration looks like below, but doesn't work. Something works, because when i type h*tps://localhost/console in a browser i get Tomcat error page "HTTP Status 404 - /console/". JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/mod_jk.log JkLogLevel info JkMount /console/* ajp13 workers.properties: worker.ajp13.type=ajp13 worker.ajp13.host=[ip_address] worker.ajp13.port=8009 Remote Tomcat is configured good i think - listen on port 8009 and servlet h*tps://[ip_address]/servlet works too. <Connector port="8009" protocol="AJP/1.3" redirectPort="443" /> Anybody helps ?

  Read the article

• Browsers not responding

  - by Jesper

  Hello, Strange thing started to happen to my computer yesterday, and I can not recall installing anything new or updating anything the last few days either. It was first the browser, Chromium, that started to freeze up and not respond for ages, say 10 minutes. Then my email, Windows Live Mail client started doing the same thing, I click on an email and the program goes "not responding" for 5-10 minutes. At first I thought it was Chromium, so i reinstalled it but no help, So i installed Opera and thought I would give it t a try, but not same thing is happening to Opera so it is clearly an OS issue or/and internet connection issue. Does anyone know what the problem can be? Im running Windows 7 32bit on a dual core Sony vaio laptop with 4gb ram. There is nothing wrong with the actual internet connection as it works fine on other computers on the network, and the connection it self does not drop. Grateful for any help, Jesper

  Read the article

• How to set up different documentroot for ip based requests, and different for domain based requests

  - by Carlos

  My problem is simply that I have a domain, let's say example.com, and my server's ip address is e.g. 192.168.0.1. I want to set up 2 different virtual hosts, so when user enters ip address (192.168.0.1) in his browser, he will see content from here: /var/www/staging But if user will type example.com, he will see content from here: /var/www I think it's possible but I was playing around with it and couldn't make it work. Also I don't want to make simple redirection. I know I can, but I need both of my apps (live & staging) working in root on the same server. I can't buy second domain, and I can't associate new ip address.

  Read the article

• Prevent Outlook from automatically deleting meeting emails

  - by Wavy Crab

  I'm using Outlook Web Access to read my email. When I receive a meeting notice and acknowledge it, Outlook adds it to my calendar then deletes the email. Is there a way to disable Outlook automatically deleting the meeting email? There doesn't seem to be any way to configure this in Options - Messaging and Options - Calendar. Note that I'm using Outlook Web Access and not the desktop client. From the copyright date this appears to be Outlook 2007. Follow-up: Based on edusysadmin's comment I logged-in using IE8, which exposed a setting not available in Firefox - "Move out-of-date meeting requests and responses to the Deleted Items folder". However unchecking this box doesn't seem to impact the auto-delete behavior. Follow-up 2: Keep in mind I am using Outlook Web Access via a web browser. I do not have the thick client Outlook installed.

  Read the article

• How to connect ftp server outside lan?

  - by srisar

  hi all , im setting up home ftp server, so i can share some files with my friends outside my lan. I am using filezilla server and everything configured. http://www.canyouseeme.org/ even see my port 21 as opend, but when i connect through fit client or through web browser, its saying "530 User saravana access denied." how can i solve this problem, i checked the user name and password, everything is good, but i didnt sent any passive mode, (i didnt know how to set), if that is causing the trouble can anyone help me, bu the way i can connect locally through localhost.

  Read the article

• zero-config CGI enabled web server

  - by halp

  To serve static content of a directory over http, one can simply navigate to that directory and type: python -m SimpleHTTPServer 11111 which will start a http server on port 11111. This hack is nice because it requires zero-config: no stand-alone web server, no config files at all. Is it possible to extend this example, or have an alternate way to achieve this goal, but also have CGI support? The final goal is to have a quick and lazy way of serving a web site from a certain directory. The site has static content (HTML pages, images), but also a CGI script. The CGI script must work properly when accessed via browser. Of course I could setup a virtual host in apache, allow CGI inside it etc. But that's not a zero-config approach.

  Read the article

• How to Enable Multirow Bookmarks Toolbar?

  - by IneedHelp

  I have tried using Multirow Bookmarks Toolbar Plus and Roomy Bookmarks Toolbar Firefox add-ons, but the problem is that they are constantly stressing my CPU (even when idling). It probably has something to do with version 11 of the browser. Anyway, is there some clean way to increase the height of the bookmarks toolbar and allow it to display bookmarks on multiple rows? I've read a lot of articles that refer to userChrome.css and I have tried a dozen solutions, but none worked because they were outdated. Please help me with this.

  Read the article

• Adding IP address to OpenVZ VPS (OpenVZ Web Panel)

  - by andy

  I apologise if I sound at all dumb. This is my first dedicated server having used a VPS for over a year and I'm trying to setup a VPS on this new server. I purchased a subnet from my hosting provider that I believe allows me 6 usable IP addresses: 177.xx.xxx.201 - 177.xx.xxx.206 The subnet address looks like this: 177.xx.xxx.200/29. I've gone on my server and added them like it said on a wiki like so: ip addr add 177.**.***.201/29 dev eth0 I done that for all six and now when I go to them in the browser they point to my server. The problem is, I'm using OpenVZ web panel to create VMs (http://code.google.com/p/ovz-web-panel/) so I created a VM and assigned one of those IPs to it. However when SSHing to that IP it SSH's to the dedicated server and not the VM. Am I missing something?

  Read the article

• How to set up server/domain name correctly in hosts file with HTTPS

  - by Byakugan

  I am trying to do local network and I am using these kind of types of network. 1) Main server which connects to internet with static IP 2) Second computer connected to first one locally with address like 192.168.0.2 - when I write this address to address line it is like i wrote localhost in original main server - so it should show my local web browser etc ... It has domain name this IP and connected router for it ... example www.domain.com so I added to my main server hosts file (linux powered) lines like these: 192.168.0.2 domain.com www.domain.com It was working ok when I entered my domain name in local computer it showed my site ... But after some time I added HTTPS cerfiticate and added this line to my apatche server: Redirect permanent / https://www.domain.com/ And now it does not work even when i add something like this to my hosts file: 192.168.0.2 https://www.domain.com So any idea how do do this thing work? Thank you.

  Read the article

• How do I delete the Windows Explorer address bar history

  - by mlissner

  Note: I am NOT referring to Internet Explorer. I am using Windows XP and Windows Server 2008 and need to delete the history values from the file browser (aka Windows Explorer). Somebody put a password into the address bar as ftp://user:pass, and now I can't delete the value. Some forums say to delete this registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\TypedPaths In Windows XP, the key doesn't exist, and in Windows Server 2008, the key is there, but deleting it doesn't seem to help. Any help?

  Read the article

• standard keyboard doesn't work, but hotkeys do.

  - by alureonissue

  I posted earlier, but I've learned more about the problem since. (windows xp sp3) AVAST found alureon in kbdclass.sys and atapi.sys. I quarantined both files and restarted. keyboard and cdrom weren't working. I uninstalled them in device manager and updated the drivers. That fixed the cdrom but not the keyboard. Oddly, the keyboard hotkeys work (the row of special keys across the top for calculator, windows explorer, mail, browser) but the standard keys do not. I uninstalled and reinstalled SP3 to no avail. Any advice? not sure if I should have reposted this but I thought the hotkeys working might be an important point left out in the first post. Sorry if I'm doing this wrong ;/

  Read the article

• Rewriting URLs from subdomain to domain in Apache

  - by Nazgulled

  Hi, My webserver is running Plesk and part of my site structure goes like this: / /httpdocs (domain root folder, URL: http://www.domain.com) /subdomains /subdomains/blog/httpdocs (blog root folder, URL: http://blog.domain.com) I have a WordPress installation in the domain root folder and WP is configured to display a static page when accessing www.domain.com and to display the blog when accessing www.domain.com/blog. However, I want to redirect (using mod_rewrite) all requests from http://blog.domain.com/ to http://www.domain.com/blog/. A few examples: Accessing http://blog.domain.com/archives should access http://www.domain.com/blog/archives/ Accessing http://blog.domain.com/tag/abc should access http://www.domain.com/blog/tag/abc/ Accessing http://blog.domain.com/some-post-title should access http://www.domain.com/blog/some-post-title All this should be transparent to the user, the address shouldn't be changed on the browser's address bar. In better words, I want a URL rewrite and not a URL redirect. Is this achievable with mod_rewrite? Can anyone help me with the .htaccess? All my attempts on doing so have failed...

  Read the article

• CNTLM issue with intranet (maybe DNS)

  - by htorque

  On my Linux box I need to use an ISA proxy that requires authentication to reach the internet. I therefore installed CNTLM and configured it to point to the proxy address and listen on port 4321. I then configured my GNOME distribution to use localhost:4321 as global proxy for HTTP and HTTPS. The result: I can connect to the internet. I can ping intranet IPs, I do receive name resolution for intranet sites, yet I cannot ping them or open any intranet site in a browser (configured to use the distributions proxy) unless I use the site's IP address. I tried blocking the intranet IP range in the CNTLM config file without luck.

  Read the article

• linux firefox flash debug: i don't get alerts when errors occur

  - by ufk

  Hello. I use firefox 3.6.13 on linux gentoo amd64 and flash 10.2 debug version, i also have firebug flashbug and flashfirebug installed. my problem is that whenever I run a flash application that encounters an error, the browser does not open an alert window. it makes it more difficult to debug applications because i need to make sure that the firebug window is always opened. the only way i can see the error is if i open the flash tab in firebug. is there a way to change this behavior ? i checked .xsession-errors and tried running firefox from console: these are the only errors the i see in the log and these errors do not appear when the flash app encounters an error which means they are not related: Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory thanks

  Read the article

• Prevent Outlook from automatically deleting meeting emails

  - by Wavy Crab

  I'm using Outlook Web Access to read my email. When I receive a meeting notice and acknowledge it, Outlook adds it to my calendar then deletes the email. Is there a way to disable Outlook automatically deleting the meeting email? There doesn't seem to be any way to configure this in Options - Messaging and Options - Calendar. Note that I'm using Outlook Web Access and not the desktop client. From the copyright date this appears to be Outlook 2007. Follow-up: Based on edusysadmin's comment I logged-in using IE8, which exposed a setting not available in Firefox - "Move out-of-date meeting requests and responses to the Deleted Items folder". However unchecking this box doesn't seem to impact the auto-delete behavior. Follow-up 2: Keep in mind I am using Outlook Web Access via a web browser. I do not have the thick client Outlook installed.

  Read the article

• Domain points me to some malicious URL and I can't get rid of it

  - by Legend

  Whenever I enter my URL into the browser, it keeps pointing me to http://fornax.myvnc.com/dev The URL doesn't even work and my antivirus doesn't complain about it so I am not sure what is happening. I logged into my domain manager at godaddy and it says that the nameservers are pointing to: NS46.DOMAINCONTROL.COM and I am not sure where this came from either because my hosting is with lunarpages whose nameserver is NS1.LUNARMANIA.COM I tried looking into my .htaccess and it is blank. My index.php was hijacked with some malicious code so I removed it completely. Everything is supposed to be normal now but still some kind of a redirection is taking place and am not sure where this is happening. Any suggestions?

  Read the article

• ReadyNAS issue with Google Apps?

  - by Jauder Ho

  The power went out (again) in my house today so I decided to set up some alerting. Since I have a ReadyNAS and the latest version of Raidinator seems to have SMTP TLS support, I figured I would try setting things up to email to a domain I have hosted on Google Apps. At this point, I have everything working IF I use a Gmail account but as soon as I switch to a Google Apps email address, it stops working and complains with smtpstatus=535 smtpmsg='535-5.7.1 Username and Password not accepted. Learn more at \n535 5.7.1 http://mail.google.com/support/bin/answer.py?answer=14257 30sm16076226wfd.23' errormsg='authentication failed (GNU SASL, method PLAIN)' exitcode=EX_NOPERM I'm wondering if anyone else has encountered this. Google's extremely aggressive captcha does not help but I am able to log in now without a captcha from a browser so I'm open to any ideas why the simple switch of a user/password combo that is supposed to work does not. I'm also attaching my config so that others can see how to set things up.

  Read the article

• Virtual guest does not have network access in cafe.

  - by blee

  My Virtualbox guest OS (Ubuntu on ubuntu host) does not connect to the internet when I have wifi access through an internet cafe system. By this, I mean where your browser redirects to an internal web page where you can enter a code. On the guest, I can successfully connect to the virtual network adapter, but I do not get internet access, nor a redirect to the internal web page. I use OpenDNS for the host. I have no problems when connecting through ethernet or regular wifi. Can someone tell me any of: 1) How to fix the problem. 2) How such cafe systems work. 3) At least point me to a technical explanation of such a cafe system so I can begin to troubleshoot. Thanks!

  Read the article

< Previous Page | 451 452 453 454 455 456 457 458 459 460 461 462  | Next Page >