Search Results

Search found 14483 results on 580 pages for 'css reset'.

Page 455/580 | < Previous Page | 451 452 453 454 455 456 457 458 459 460 461 462  | Next Page >

• Wifi Drops Connections with WPA2-PSK

  - by graf_ignotiev

  I run a small computer lab made up of 10 computers of identical hardware and software (Dell Latitudes with Windows 7 x64 Enterprise) and I use a ZyWALL 2WG as a router/firewall. Nine of the computers connect to the router over wifi using WPA2-PSK encryption while the last one is connected by ethernet cable. I'm having a problem where any computer connected to the wi-fi occasionally drops off the network (it cannot be pinged and the client cannot ping the gateway). It only happens on the wifi side and only when the encryption is WPA2-PSK or WPA-PSK. I tried using another router with a different make and model and had no problems. Thinking it could be a software error, I reset the router to factory defaults and installed the newest firmware (V4.04(AQI.8) | 04/09/2010), but still have the problem. The 802.1X log gives the following error User logout because of user disassociation. with this note WPA2-PSK:00242c582ece:logout where 00242c582ece is the mac address of the device. At this point I'm out of things to try and leads to follow. It looks like this user had the same or similar problem, but none of those proposed solutions work for me.

  Read the article

• Drop database on DB2 9.5 - SQL1035N The database is currently in use

  - by Tommy

  I've never got this working the first time, but now I can't seem to do i at all. There is a connection pool somewhere using the database, so trying to drop the database when an application is using the database should give this error. The problem is there are no connection to the database when I issue these commands: db2 connect to mydatabase db2 quiesce database immediate force connections db2 connect reset db2 drop database mydatabase This allways give: SQL1035N The database is currently in use. SQLSTATE=57019 running this command shows no connections/applications DB2 list applications I can even deactivate the database, but still can't drop it. db2 => deactivate database mydatabase DB20000I The DEACTIVATE DATABASE command completed successfully. db2 => drop database mydatabase SQL1035N The database is currently in use. SQLSTATE=57019 db2 => Anyone got any clues? I'm running the cmd-windows as the local administrator (windows 2008) and this is also the admin for DB2. The connectionpool-user cannot connect during quiesce-state.

  Read the article

• Folder Redirection Issues - Freezing, Strange Warnings

  - by JCardenas

  I have Folder Redirection set up in a test environment for a couple accounts. I have followed the instructions for setting up the folder security settings here, and I can confirm that folders are created automatically by the system with the correct security settings when a user logs in. The GPO has been configured to automatically move user files up to the redirected folders, and this is working properly. Problems start occurring when a Windows 7 PC is in use. It is rare, but Explorer will lock up when performing a file write operation (move/copy/save from application). This results in the entire system being unusable, with only a hard reset resolving it (Task Manager doesn't start, the "three finger salute" does nothing, apps stop working). The mouse functions, but clicks do nothing. The other issue is that occasionally when copying/creating/modifying files a dialog box will pop up with the message "You need permission to perform this action. You require permission from XYZ\cardenas to make changes to this folder." The folder that was created by copying an existing one has the correct security settings and lists me as the owner. My company will not be implementing Folder Redirection on XP, since we are making a "clean break" with implementing new technologies with the Windows 7 rollout, so this behavior has not been - nor will be - checked for in XP. Thanks in advance for your help!

  Read the article

• Ghost Solution Suite: Booting over PXE to WinPE for re-imaging, then booting to installed OS

  - by uberdanzik

  I have 40 networked computers that need to be re-imaged each night over a network via an automatic and unattended process. This is to reset the computers to a default state, as well as update the computers to the latest software loads. I'm using Symantec Ghost Solution Suite 2.5. My process so far is the following: Client begins in a powered down WakeOnLan accepting state. Ghost Console task uses WakeOnLan and PXE to boot the client into the WinPE environment. The client connects to the ghost console and reimages itself successfully. The client closes WinPE and restarts. PROBLEM: The client boots into the WinPE environment again, instead of the newly installed OS (Win7) I need it to boot into Win7 once so that I can run a few configuration batch files, then shut down into the WakeOnLan state again. Ghost console even reports an error on the process, that it never rebooted into the OS. Right now it seems that there is not an option to stop it from booting into the PXE server's WinPE image after re-imaging. Even if I set up a PXE boot menu with other boot options, its pointless, because it will always boot the default option. I would expect the ghost console task to be able to influence the PXE boot choice somehow. What do they expect us to do, turn the PXE server on and off manually? How can I get the client to boot to the OS after re-imaging? Thank you.

  Read the article

• How to configure Farsun USB barcode scanner to not auto-trigger

  - by David Grayson

  At my company we have several USB barcode scanners. I'm not sure exactly what model they are, but I think they are the FG9800 from Farsun because that's what they look like on the exterior. They came with a programming manual that is very similar to this document from the Farsun website. When I scan the "Output Firmware Version" barcode, my scanner types the following into the computer: Farsun V2.00 2011-01-01 Is it possible to configure these scanners so they only read barcodes in response to the trigger button being pressed? I don't want them to automatically read barcodes. Additionally, I want this setting to be remembered while the scanner is turned off. Since this scanner only has a USB port, the only way to configure it that I know of is to scan bar codes from the manual (or make your own). I have tried scanning the configuration bar codes for Single Scan (013300), Single Scan No Trigger (013301), and Laser/CCD Timeout - 5 Seconds (0134005) from this document. Sometimes (but not often) this puts the scanner in to the right mode, where it only scans when the button is pressed. Unfortunately, the scanner seems to always leave this mode when it is power cycled. I have also scanned the "Reset Configuration To Defaults" barcode (0B) many times. We have three different scanners like this and I have not been able to successfully configure any of them. If the things I want are not possible with these Farsun-based scanners, is there some other scanner we can use?

  Read the article

• Can't view other computers on Network

  - by Darkart

  Systems: My Machine: Windows 7 Ultimate connected through ethernet into router Her Machine--Other Machine: Windows 7 Ultimate connected through wireless Router:F5D8236-4 N Wireless Router Version 1 Firmware: 2.01.03 (Apr 28 2009) ISP: Comcast Problem: I can not view the "Other Machine" on the network at all. I opened command prompt and ran net view and saw the pc name. I tried pinging the pc and it times out. Went inside the router and tried viewing the computer on the DHCP list and it can not be seen. I restored the router back to default settings and firmware and completely reset the modem and router, and created home group. I went to the other machine to configure home group settings and made sure that both PC's had identical settings. She was able to see my machine but I could not see hers. I restarted both machines and now we cant see each other at all. Also her PC ("Other Machine") had exclamation mark in the wireless icon but was connected just fine. There is no firewalls on currently or anti-virus enabled, and still can not see each other. Right now I am checking for updated drivers for the wireless card, but my question is could it be the router or something hardware related? I have went through all the settings in the Home group and visited most FAQ's and still no luck. Also as it stands I can not view her machine inside the router DHCP Client List :(

  Read the article

• Broken UAC, cant edit File/folders or change settings in user account

  - by Antoros

  It appears that UAC is broken cant move/delete some file/folders, when asked to use administrative right (and say yes) it shows the loading bar and then nothings gets moved/deleted, no error whatsoever opened control panel, user account and when i click on any option with the Shield (administrative rights) the mouse changes to loading and thengo back to normal, not opening any menu or showing any error Already done a sfc /scannow , no errors found Already used Microsoft's Fix it, reclycle bin broken and repaired, still the same error Used microsoftaccounts tool , this are the errors i got: Problem with microsoft account policy... <- this is the problem (didint fix) Trust this PC <- loop of redirections, cant get to trust this pc (only one with w8) Problems witht sytem registration : i think it is because of the soft system reset Some setting have sync turned off : i never configured anything to sync Rootcauses found and created logs : would like to know where the logs are saved... had to use a ".reg" file to change uac setting to never notify, thinking it would fix this, no, it stoped asking though, i can still open a cmd with Administrative rights, but cant access to UAC settings Accesed Administrator account (net user administrator /active:yes)and even with that account could change any settings so there it is, dont know what else to do in the moment (this pc broke with 8.1 update and was restored to factory configuration, it broke several drivers and kept most of the registry entries, i cant find the cause of this problem. other info: i tried to delete a file in a program folder and couldnt, downloaded unlocker to check first if it was permissions but no, it showed me a msg telling me that there wasnt any error, and if i would like to delete it, clicked on yes, and it did delete it, what amuses me is that i cant without this tool, not even using the feature that takes over ownership Edit: wow, in a not crappy pc chkdsk is fast, completed with no errors found : /

  Read the article

• Sparc v440 unable 2 boot after recommended patch install

  - by user100660

  After installing the October 2011 recommended patch bundle on a Solaris 10 the host fails to boot. The output is {0} ok boot SC Alert: Host System has Reset screen not found. keyboard not found. Keyboard not present. Using ttya for input and output. Sun Fire V440, No Keyboard Copyright 1998-2003 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.10.10, 8192 MB memory installed, Serial #54744555. Ethernet address 0:3:ba:43:55:eb, Host ID: 834355eb. Rebooting with command: boot Boot device: /pci@1f,700000/scsi@2/disk@0,0:a File and args: \ Evaluating: Out of memory Warning: Fcode sequence resulted in a net stack depth change of 1 Evaluating: Evaluating: The file just loaded does not appear to be executable. {3} ok If I do a boot -F failsafe the host come up and I'm able to mount the root device (ufs on /dev/dsk/c1t0d0s0) and nothing appears broken, i.e I can see the logfiles from the patch install etc. Root device still have 1GB+ free. Only 2 kernel patches was installed from the patch bundle: 144500-19 & 147440-02. Any hints how to debug it further, etc.

  Read the article

• How To Fix Samba File Permission Issues in Mac OSX

  - by user1867768

  I've had this problem for a long time, here is the basics of it... I use a mixed environment of Windows 7/8 computers with Mac OSX Lion/Mountain Lion. Whenever a Windows computer creates a file on a SMB share on the Mac it no longer has group permissions, only the person who created or updated it can access it. My solution has been to go onto the Mac system and reset permissions for the entire directory structure then everyone can see it again. About the only thing on this that I can find was for OSX pre Snow Leopard that mentioned editing the SMB.CONF file to fix their particular problem (similar to mine, http://www.gladsheim.com/blog/2009/09/19/osx-leopard-and-samba-permissions/). The problem is that now Lion and Mountion Lion no longer have an SMB.CONF file (another web search pointed to the com.apple.smbd.plist (http://kidsreturn.org/?s=smb.conf) but it's an XML file now and I'm not clear on what should be done to THAT to fix the problem. So, short of me writing an Applescript to run every hour to fix permissions, does anyone know a solution to this very frustrating problem? Thank you in advance for any advice or solutions you can offer!

  Read the article

• Event Log: atapi - the device did not respond within the timeout period - Freeze

  - by rjlopes

  Hi, I have a Windows Server 2003 that stops working randomly (displays image on monitor but is completely frozen), all I could found on the event log as causes were an error from atapi and a warning from msas2k3. The event log entries are: Event Type: Error Event Source: atapi Event Category: None Event ID: 9 Date: 22-07-2009 Time: 16:13:33 User: N/A Computer: SERVER Description: The device, \Device\Ide\IdePort0, did not respond within the timeout period. For more information, see Help and Support Center at http : // go.microsoft.com / fwlink / events.asp. Data: 0000: 0f 00 10 00 01 00 64 00 ......d. 0008: 00 00 00 00 09 00 04 c0 .......À 0010: 01 01 00 50 00 00 00 00 ...P.... 0018: f8 06 20 00 00 00 00 00 ø. ..... 0020: 00 00 00 00 00 00 00 00 ........ 0028: 00 00 00 00 01 00 00 00 ........ 0030: 00 00 00 00 07 00 00 00 ........ Event Type: Warning Event Source: msas2k3 Event Category: None Event ID: 129 Date: 22-07-2009 Time: 16:14:23 User: N/A Computer: SERVER Description: Reset to device, \Device\RaidPort0, was issued. For more information, see Help and Support Center at http : // go.microsoft.com / fwlink / events.asp. Data: 0000: 0f 00 10 00 01 00 68 00 ......h. 0008: 00 00 00 00 81 00 04 80 ......? 0010: 04 00 00 00 00 00 00 00 ........ 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ 0028: 00 00 00 00 00 00 00 00 ........ 0030: 01 00 00 00 81 00 04 80 ......? Any hints?

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I'm trying to run Mac OS X 10.6.3 on VMWare 7.1 from within Windows 7 64 bit. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• Windows 7 - "A disk read error occured. Press Ctrl + Alt + Del to restart"

  - by Senthil

  Problem: When I switch on my PC, after BIOS POST, a cursor is blinking for about 5 seconds and then I am getting this error message: A disk read error occurred. Press Ctrl + Alt + Del to restart. I am able to go into BIOS. But Windows loader doesn't even start. This message is shown after my motherboard logo comes and goes. Symptoms: I DID notice my system freezing for minutes at a time for past two days. Also, in the past two days, it stopped half way through the Window booting process. I had to do hard reset couple of times to get it working. But since today morning, I only get this error message. Configuration: Operating System: Windows 7 Ultimate 32-bit only. Hard disk: 1 Physical Disk - 80GB SATA Partitions: Two (2) - C: and D: File System: NTFS No drive encryption or compression is turned on. After I searched on the net, I have found people mentioning these possible causes: Hard Disk is physically failing Corrupt MBR Bad Sector I am planning to buy a new hard disk, install Windows on it and continue. But I need data from the old hard disk. The data I want is in D: drive, outside any Windows user folder, is not encrypted or compressed or protected in anyway. I think if someone/something can get the disk working again and knows NTFS, the data can be hopefully read. What steps should I follow to recover files from the defective disk? Update: I bought a new disk, installed windows on it and added the defective one as a slave. Then I was able to read the data from the defective hard disk. Though chkdsk found lots of errors, the files I wanted were not affected and I got them back :) I am not using that hard disk anymore though it seems to be working at the moment.

  Read the article

• Cannot access SMC8014WG-SI provided by TimeWarner/RoadRunner administrative interface...

  - by Matt Rogish

  I just received installation of RoadRunner internet/TV/Voice and I was given a wi-fi router from the TimeWarner folks. The model is a SMC SMC8014WG-SI. Unfortunately, the password it uses is WEP and that is, as we all know, completely insecure. The tech that was here didn't know how to change it to something like WPA2 w/TKIP, and I was on hold for 20 minutes with the TimeWarner folks before I gave up. My problem is that the default web interface (http://192.168.0.1) isn't responding. I can ping it, I can access the internet through it, but I can't get to the admin interface. I did a "hard reset" of the device but still no dice. My suspicion is that the wi-fi admin interface is disabled (a common setting) but the wired interface isn't working on either of my two laptops (I've tried two laptops with two different cables, no link light activated). Am I SOL? Did they lock this down so I can't do what I want to do? Worst-case is I just hook up my go-to WRT54G router to the other modem and leave this one turned off, but I'd rather use their hardware to avoid any "It's not our problem" in the future. Any thoughts? Thanks!!

  Read the article

• How can I erase the traces of Folder Redirection from the Default Domain Policy

  - by bruor

  I've taken over from an IT outsourcer and have found a struggle now that we're starting a migration to windows 7. Someone decided that they would setup Folder redirection in the Default Domain Policy. I've since configured redirection in another policy at an OU level. No matter what I do, the windows 7 systems pick up the Default Domain Policy folder redirection settings only. I keep getting entries in the event log showing that the previously redirected folders "need to be redirected" with a status of 0x80000004. From what I can tell this just means that it's redirecting them locally. Is there a way I can wipe that section of the GPO clean so it's no longer there? I'm hesitant to try to reset the default domain policy to complete defaults. ***UPDATE 6-26 I found that the following condition occurred and was causing the grief here. I've already implemented the new policies for clients, and for some reason, XP was working great, 7 was refusing to process. The DDP was enforced. Because of this, and the fact that the folder redirection policies were set to redirect back to the local profile upon removal, it was forcing clients to pick up it's "redirect to local" settings. Requirements for to recreate the issue. -Create a new test OU and policy. -Create some folder redirection settings, set them to redirect to local upon removal -Remove settings on that GPO -Refresh your view of the GPO and check the settings. -You'll notice that the settings show "not configured" entries for folder redirection. -Enforce this GPO -Create another sub-OU -Create a GPO linked to this sub-ou and configure some folder redirection settings. -Watch as the enforced GPOs "not configured" setting overrides the policy you just defined. I've had to relink the DDP to all OU's that have "block inheritance" enabled, and disable the "enforced" option on the DDP as a workaround. I'd love to re-enable enforcement of the DDP, but until I can erase the traces of folder redirection settings from the DDP, I think I'm stuck.

  Read the article

• Blank desktop when logging into a Virtualized Windows 2008 Terminal Server?

  - by Rachel

  We have a Virtualized Terminal Server running Windows Server 2008. When the admin user logs in, everything is fine. When anyone else logs in, their desktop and start menu is blank (they have the taskbar, start button, and quick launch links though). If I go into Windows Explorer, I can see icons in their desktop folder (although the icon image is missing and it is just displaying the generic icon), but can't run any of them. If I login with a user that is part of the Administrator group in Active directory, I get the same behavior except I can launch the programs found in the Desktop Folder of Windows Explorer. I cannot drag these items out onto the desktop though - The cursor doesn't allow me to drop them. From Task Manager I can see that explorer.exe and dwm.exe are both running. The Authenticated Users and Interactive groups are both under the Users group, along with our network's Domain Users group. Does anyone know why this is happening and how I can fix it? Also, not sure if it's related but about 1 in every 3 logins just hangs at a completely blank blue screen (no start button, taskbar, or quick launch buttons) and needs to be disconnected / reset by an admin. Edit I just noticed that the desktop itself doesn't even respond to click events. It's almost like the entire desktop is missing. At first I thought it didn't respond to right-click events because of an AD policy, but then I noticed if you open the Start Menu and click the desktop, the start menu doesn't shut like it should

  Read the article

• PXE boot -- kernel not found on TFTP server

  - by user70523

  I followed the following link for PXE boot, http://www.howtoforge.com/setting-up-a-pxe-install-server-on-ubuntu-9.10-p3 and I was able to ping the client from the server and also when I booted up the client It is getting the IP address from the server. But later,I got this error PXELinux 3.82 2009-06-09 . . . [other informations] !PXE Entry point found (we hope) at 9D3B:0109 via plan A UNDI code segment at 9D3B len 16C2 UNDI data segment at 933B len A000 Getting cached packet 01 02 03 . . . [other informations] TFTP prefix: Trying to load: pxelinux.cfg/ec5db4c0-74fe-d511-b9e7-3d9235afe5a1 Trying to load: pxelinux.cfg/01-00-17-31-b6-5e-a8 Trying to load: pxelinux.cfg/0A64491E Trying to load: pxelinux.cfg/0A64491 Trying to load: pxelinux.cfg/0A6449 Trying to load: pxelinux.cfg/0A644 Trying to load: pxelinux.cfg/0A64 Trying to load: pxelinux.cfg/0A6 Trying to load: pxelinux.cfg/0A Trying to load: pxelinux.cfg/0 Trying to load: pxelinux.cfg/default Unable to locate configuration file Boot failed: press a key to retry or wait for reset I have put all the files mentioned in the link in tftpboot. Can anyone explain what could be the problem. Thanks in advance

  Read the article

• Joining two routers together, but I have no access to the second router, although I know it's IP address and Gateway

  - by JohnnyVegas

  I have temporarily moved into a rented apartment for 4 months, which has wireless. The trouble I am having is that the access points here are wifi only and no RJ45 and I need to use RJ45 to connect some equipment that I am working with. I have purchased an RT-N66U and installed Tomato (shibby ver. 1.28) and successfully replaced the existing access point, but now I want to enable the access point that I have replaced as it links wirelessly to 3 others. Can I plug in a cable from the access point to my RT-N66U and get it to access the internet via my router? I have no access to the existing wireless access point, and don't want to reset it as it's not mine. There is another router situated in the roof somewhere which I also have no access to, but it's supplying my RT-N66U internet and I most definitely have a double-nat, which although isn't the best way of doing things I am limited with what I can do. Any suggestions on routing tables, vlans etc would be helpful, but I have no experience in these fields before - but I know the tomato firmware can cater for this. My router is set to IP 10.0.1.1 and dhcp is 10.0.1.100-200 The wireless access point address was 192.168.1.2 but this was assigned by the router in the roof which has the address 192.168.1.1. There is a cable from this router going to a wall socket which I now have my RT-N66u attached to via the WAN port. I understand it's scruffy and it isn't the way to do things but I have tried to ask for the admin details but as the wireless network is looked after by a third party and nobody knows their details I am stuck with this dilemma. I could buy three wireless access points and replace the existing but this isn't what I want to do, and although I have installed plenty of DD-WRT wireless repeater bridges they simply don't work here for some unknown reason. The phone line here is very noisy too and I don't have the rights to install ADSL in a building that isn't mine, and 3G coverage isn't good enough either. Thanks for your time

  Read the article

• I can't download or stream for more then 3 sec, and then the conection activity just dies

  - by JMHein

  Just got a new internet connection installed at my sisters place, but it randomly just stops working. At first it was only affecting flash videos. they would randomly just stop buffering. I did a lot of research on this and found that there can be many things that cause this exact trouble. I then tried IE and some flash would stream fine, but still random deaths. So I told my brother in law to reset the router and modem and that fixed the problem for them but not my laptop. I then started trying to fix the flash problem only to fined that downloads of any kind were affected. Now it is so bad that 50% of page loads will never finish because the connection drops to 0% usage with in a split sec. I can't get flash reinstalled because the installer is trying to download but the download dies at 8% I tried up loading a large file by FTP to a web server with no troubles. Yet any activity on my end that takes longer then about 1 sec to finish, just never finishes I can watch the network log in the taskmanager and it spikes for ruffly one sec then drops back to zero and when I go back to the web page it says it is still loading and no matter how long I let it sit it never does any thing more till I reload then it will again create a very short spike of activity on the connection and then drop to zero. Also if I start a download and it does drop off I can restart the download where it left off and get up to 100Kb/s for around the same one sec then it drops to around 14Kb/s then zero a sec latter... I am running Win 7 home prem x64 with FF11 and IE8 I have simply tried every thing I can short of calling up the ISP which very likely will get me no where fast. any advice on what step to take to figure this out would be nice. I am not even sure it is not just an ISP problem. (at least I should be able to get flash reinstalled once I get back home)

  Read the article

• Socket options for a tcp server with 3G clients & frequent disconnections

  - by Joel

  I have a TCP server, written in java, sending and receiving many short messages, from 500 bytes to 100 KB long. It's a chess game and chat server, to make it simple. The server is running Debian 6. Half of the clients are connecting from 3G networks, and half over standard DSL. A portion of the 3G clients lose connection pretty often. The error I get on the server and on the client socket is Connection reset. I have come across this page at Oracle documentation: socketOpt. I am wondering what I could tune there to lower the number of disconnections from 3G clients. I don't mind about the ping or transfer rate, but just about the TCP disconnections. I am not skilled enough to understand the impact of each setting, but I sort of understood that the TCP window was important, although I don't know exactly how. So I'm asking if anyone here has an idea ? Thanks if you can help.

  Read the article

• Drop database on DB2 9.5 - SQL1035N The database is currently in use

  - by Tommy

  I've never got this working the first time, but now I can't seem to do i at all. There is a connection pool somewhere using the database, so trying to drop the database when an application is using the database should give this error. The problem is there are no connection to the database when I issue these commands: db2 connect to mydatabase db2 quiesce database immediate force connections db2 connect reset db2 drop database mydatabase This allways give: SQL1035N The database is currently in use. SQLSTATE=57019 running this command shows no connections/applications DB2 list applications I can even deactivate the database, but still can't drop it. db2 => deactivate database mydatabase DB20000I The DEACTIVATE DATABASE command completed successfully. db2 => drop database mydatabase SQL1035N The database is currently in use. SQLSTATE=57019 db2 => Anyone got any clues? I'm running the cmd-windows as the local administrator (windows 2008) and this is also the admin for DB2. The connectionpool-user cannot connect during quiesce-state.

  Read the article

• Can't Get Mac Mini to turn on - no screen, no beep, only the fan, power light, and optical drive noi

  - by pibyers

  I have an Intel-based Mac mini mid-2007 (Model A1176). This is the computer my kids use so I don't use it regularly. The computer had been working fine until one day my kids told me that it no longer works. The computer will not boot up. When I turn it on the fan turns, the white power light in the front turns on, and there is a sound that appears to be from the optical drive (rather than hard drive). I don't get anything to the monitor, nor do I get any dings or other start up sounds from the computer. Here is what I've tried thus far to no avail: 1) Swapped out the monitors early on since I figured that was my weak link - no change 2) Reset the PMU - no change 3) Tried to boot up from the System Disk - The mini loaded the dvd into the drive, but nothing else (I can't eject the disk so I can put it back) 3) Start up the computer in target mode connected to another mac - I tried this too, but I never received a chime or the disk show up on the other mac. I'm about out of ideas apart from scraping the computer. Does anyone have any ideas that I can try? Again, nothing has been done to the computer in at least 6 months when I upgraded the RAM. I'm also still on Leopard. Thanks.

  Read the article

• How to check DVD region settings in Window 7

  - by jmatthias

  I have installed Windows 7 on my laptop. When I put a movie in the DVD drive, the video player starts up and tells me 'THIS DISC IS NOT FORMATTED TO PLAY IN THIS REGION'. I have changed the DVD region a few times in the past but while I was in Windows XP I changed the region in Region 1. I cannot find how to check the DVD region setting in Windows 7 (it's not located on the hard properties page of the DVD anymore. Does anybody know how to check the DVD region in Windows 7? Update: If I connect an external USB DVD drive I can see the DVD region tab on the hardware properties dialog. I guess there is some compatibility problem with my internal DVD drive and Windows 7 (as I said I was able to inspect/change the DVD region in Windows XP). Solution: I think I had used LtnRPC in the past to remove the region from my DVD drive. It looks like Windows 7 does not like region free DVD drives (at least mine anyway). I was able to use LtnRPC to reset the region back to 1. I can now see the region tab on the DVD drives hardware properties.

  Read the article

• SharePoint Backup/Restore without stsadm

  - by Kevin

  Due to problems we found with the restore of sites/site collections using stsadm (our tasks generated from workflows were not restored), we've taken a different route for backup/restore. We plan a major customization to our SP site and want to take a backup so we can rollback in case the install fails. In our System Testing (not production) environment, we've backed up the 12 hive, the virtual dir's that the IIS points to SharePoint, and the SharePoint databases in SQL (using SQL server to do the db backups). We have custom event handlers and workflows built with Visual Studio, and deploy the dlls to the GAC as version 2 (signed and versioned in Visual Studio). So when we deploy, the GAC will contain 2 versions of the workflows - version 1 and version 2. During the deploy we use SP stsadm features to install/activate the WF's. We also go to each library and add the new, version 2 WFs. This automatically sets the version 1 WF's to "Not Allow" new instances (which is what we want) and the version 2 as active - perfect so far. When we've completed the install, we then assume a failure and attempt to restore to the same machines (SharePoint on one server, SQL on another). We start by uninstalling the version 2 WF's from the GAC, reset IIS (to clear cache of these ver. 2 WF dlls'), restore the 12-hive and virtual directory folders, then restore the SQL dbs. This is all just as manual as you read it - no stsadm here. All seems to work after our restore, it appears the restore was successful - the mods we made to column names, data changes, etc during the install are all reverted back to the original pre-install state. With one exception. When we run a workflow, it always fails and the Logs in the 12-hive indicates the WF is still trying to use the version 2 of the dll (System.IO file not found error) We think we've backed up and restored all the moving pieces of Sharepoint but we're missing something here, does anybody have any ideas why the version 2 WF dlls are still being referenced eventhough we restored all the folders and db's of SharePoint? Thanks, Kevin

  Read the article

• Asus n61Ja notebook bios update

  - by zKs

  I wanted to update the bios, with an official bios update, from version 207 to 211. I didn't use winflash, I used easyflash in the bios. Everything seemed to be going okay; it deleted the old files, wrote the new ones, verified the new ones. Then it said: shutdown in/after 2 seconds and it shut down. Then nothing happened anymore. Power button completely unresponsive. The battery light was still on, and I'm not sure if I should've just waited... I didn't though, I thought I had to remove the battery, take the power off completely to be able to start it up again. So I'm wondering: what are my options here? My warranty expired and I don't really have the money to send it in and pay hundreds of bucks on repairs. Is there anything I can try? CMOS battery reset? Anything??? Please help me out! I would be very grateful :) ps. What was sort of odd btw, was that easyflash said something like that it was an unsigned bios and if I wanted to flash it anymore, if i wanted to 'force' it or something. It was with 100% certainty the correct update from the Asus.com support site, so I didn't take that 'warning' seriously.

  Read the article

• Wireless USB keyboard and mouse can wake system, but then receiver is inactive

  - by BlueMonkMN

  I have a Microsoft brand USB device that acts as a receiver for a wireless Microsoft Keyboard and a wireless Mouse. When it's operating normally, there are LEDs on the device indicating Caps Lock, Num Lock and Function Lock, of which the latter 2 are usually lit. It is plugged into a Dell Isnpiron 531 with Windows 7 32-bit running on an AMD Athlon 64 X2 Dual Core processor 5000+. When the computer goes to sleep (the power indicator on the main box is flashing), I can wake it by moving the mouse. So far all is good. However, something changed in, I think, the past couple weeks (I suspect due to a Microsoft driver update problem). Before the change, after waking the computer, everything would operate normally as far as I could tell, but now after waking the computer, the receiver has no lights on, and the keyboard and mouse are completely unresponsive (which is odd, considering the mouse woke up the computer). There is a button on the receiver that's supposed to reset the wireless connection and flash the lights while it does so, but it has no effect in this state. It's like the receiver doesn't have power (but how would the system know I moved the mouse, unless the power was on until it woke up?). I have checked the BIOS/CMOS settings or whatever you call them, and did not see anything related to USB in the power management section. I have checked Windows 7 device manager and ensured that all the USB Root Hub devices have the setting unchecked for allowing the USB power to be turned off. Like I said, this was working before, and the only thing I can think of that's changed is applying Windows Updates.

  Read the article

< Previous Page | 451 452 453 454 455 456 457 458 459 460 461 462  | Next Page >