Search Results

Search found 12765 results on 511 pages for 'format'.

Page 457/511 | < Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >

• Bring Office 2003 Menus Back to 2010 with UBitMenu

  - by Matthew Guay

  Are you having trouble getting used to the Ribbon interface in Office 2010?  Here’s how you can roll back the clock a bit and bring back the familiar menus and toolbars from 2003. The Office 2007 Ribbon was both praised and criticized.  While many users felt they were more productive with the new interface, others felt frustrated searching for commands they had memorized in older versions of Office.  Now, with Office 2010, the ribbon interface has been brought to every app in the Office suite, and is integrated into many newer programs from Microsoft. If you’re moving from Office 2003, using UBitMenu allows you to add the old familiar menus back along with the new Ribbon interface for an easier learning curve. Also, with the customizability of Office 2010, we can strip away the extra Ribbon tabs to make it more like 2003. Get the 2003 Menus and Toolbars Back in Office 2010 Download UBitMenu (link below), and install as normal.  Make sure all of your Office programs are closed during the installation.  This handy utility is very small, and installed amazingly quick. Open Word, Excel, or PowerPoint and there’s now a new Menu tab beside Home in the Ribbon.  Now you can access all of your favorite old Office commands in the familiar menus, and access many of the newer Office features such as SmartArt.   Here’s a close-up of the toolbar.  Notice that the layout is very similar to that of Word 2003. You can access all of the new Transitions in PowerPoint 2010 from the menu bar.   The menu in Excel even included support for the new PivotTable and PivotCharts Wizard. One problem we noticed was that the toolbars were condensed to a drop-down menu if the Office window was less than 870px wide.  This may be a frustration to users with low-resolution displays, and you might want to use the Office Apps maximized. Get Rid of the Ribbon Now that you’ve got the old menus back, you can get rid of the extra ribbon tabs if you’d like.  Office 2010 lets you customize your ribbon and remove tabs, so let’s get rid of all the other tabs except for our new Menu tab.  In our example we’re using Word, but you can do it in Excel or PowerPoint the same way. Click the File tab and select Options. Alternately, in the Menu tab, select Tools and then Word Options. Select Customize Ribbon on the left sidebar, then uncheck the boxes beside all the ribbon tabs you want to hide on the right.  Click Ok when you’re finished. While you’re at it, you can change the default color scheme as well. Note: The color change will automatically change the color scheme in all of the Office apps, so you’ll only need to do that once. Now the ribbon only has 2 tabs…the File tab for the new Backstage View, and the UBitMenu tab we just installed.  It almost has the appearance Word 2003, but with the new features of Word 2010!  You’ll need to repeat these steps in Excel and PowerPoint if you want to customize their ribbon the same.   Conclusion If you’ve been having a hard time getting used to Office 2010, UBitMenu is a great way to get familiar with the new interface, or simply stay productive with your old tricks.  We do wish it supported the other Office applications like OneNote and Outlook. That doesn’t make it a deal breaker though, it can make the learning curve easier in Word, PowerPoint, and Excel. UBitMenu is free for personal use, and available at a very reasonable price for businesses. If you’re using Office 2007 and not a fan of the Ribbon, UBitMenu works for it as well. Download UBitMenu Similar Articles Productive Geek Tips How To Bring Back the Old Menus in Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideHow to Find Office 2003 Commands in Office 2010Make Word 2007 Always Save in Word 2003 FormatMake Excel 2007 Always Save in Excel 2003 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets

  Read the article

• Making your WCF Web Apis to speak in multiple languages

  - by cibrax

  One of the key aspects of how the web works today is content negotiation. The idea of content negotiation is based on the fact that a single resource can have multiple representations, so user agents (or clients) and servers can work together to chose one of them. The http specification defines several “Accept” headers that a client can use to negotiate content with a server, and among all those, there is one for restricting the set of natural languages that are preferred as a response to a request, “Accept-Language”. For example, a client can specify “es” in this header for specifying that he prefers to receive the content in spanish or “en” in english. However, there are certain scenarios where the “Accept-Language” header is just not enough, and you might want to have a way to pass the “accepted” language as part of the resource url as an extension. For example, http://localhost/ProductCatalog/Products/1.es” returns all the descriptions for the product with id “1” in spanish. This is useful for scenarios in which you want to embed the link somewhere, such a document, an email or a page.  Supporting both scenarios, the header and the url extension, is really simple in the new WCF programming model. You only need to provide a processor implementation for any of them. Let’s say I have a resource implementation as part of a product catalog I want to expose with the WCF web apis. [ServiceContract][Export]public class ProductResource{ IProductRepository repository;  [ImportingConstructor] public ProductResource(IProductRepository repository) { this.repository = repository; }  [WebGet(UriTemplate = "{id}")] public Product Get(string id, HttpResponseMessage response) { var product = repository.GetById(int.Parse(id)); if (product == null) { response.StatusCode = HttpStatusCode.NotFound; response.Content = new StringContent(Messages.OrderNotFound); }  return product; }} The Get method implementation in this resource assumes the desired culture will be attached to the current thread (Thread.CurrentThread.Culture). Another option is to pass the desired culture as an additional argument in the method, so my processor implementation will handle both options. This method is also using an auto-generated class for handling string resources, Messages, which is available in the different cultures that the service implementation supports. For example, Messages.resx contains “OrderNotFound”: “Order Not Found” Messages.es.resx contains “OrderNotFound”: “No se encontro orden” The processor implementation bellow tackles the first scenario, in which the desired language is passed as part of the “Accept-Language” header. public class CultureProcessor : Processor<HttpRequestMessage, CultureInfo>{ string defaultLanguage = null;  public CultureProcessor(string defaultLanguage = "en") { this.defaultLanguage = defaultLanguage; this.InArguments[0].Name = HttpPipelineFormatter.ArgumentHttpRequestMessage; this.OutArguments[0].Name = "culture"; }  public override ProcessorResult<CultureInfo> OnExecute(HttpRequestMessage request) { CultureInfo culture = null; if (request.Headers.AcceptLanguage.Count > 0) { var language = request.Headers.AcceptLanguage.First().Value; culture = new CultureInfo(language); } else { culture = new CultureInfo(defaultLanguage); }  Thread.CurrentThread.CurrentCulture = culture; Messages.Culture = culture;  return new ProcessorResult<CultureInfo> { Output = culture }; }}   As you can see, the processor initializes a new CultureInfo instance with the value provided in the “Accept-Language” header, and set that instance to the current thread and the auto-generated resource class with all the messages. In addition, the CultureInfo instance is returned as an output argument called “culture”, making possible to receive that argument in any method implementation   The following code shows the implementation of the processor for handling languages as url extensions.   public class CultureExtensionProcessor : Processor<HttpRequestMessage, Uri>{ public CultureExtensionProcessor() { this.OutArguments[0].Name = HttpPipelineFormatter.ArgumentUri; }  public override ProcessorResult<Uri> OnExecute(HttpRequestMessage httpRequestMessage) { var requestUri = httpRequestMessage.RequestUri.OriginalString;  var extensionPosition = requestUri.LastIndexOf(".");  if (extensionPosition > -1) { var extension = requestUri.Substring(extensionPosition + 1);  var query = httpRequestMessage.RequestUri.Query;  requestUri = string.Format("{0}?{1}", requestUri.Substring(0, extensionPosition), query); ;  var uri = new Uri(requestUri);  httpRequestMessage.Headers.AcceptLanguage.Clear();  httpRequestMessage.Headers.AcceptLanguage.Add(new StringWithQualityHeaderValue(extension));  var result = new ProcessorResult<Uri>();  result.Output = uri;  return result; }  return new ProcessorResult<Uri>(); }} The last step is to inject both processors as part of the service configuration as it is shown bellow, public void RegisterRequestProcessorsForOperation(HttpOperationDescription operation, IList<Processor> processors, MediaTypeProcessorMode mode){ processors.Insert(0, new CultureExtensionProcessor()); processors.Add(new CultureProcessor());} Once you configured the two processors in the pipeline, your service will start speaking different languages :). Note: Url extensions don’t seem to be working in the current bits when you are using Url extensions in a base address. As far as I could see, ASP.NET intercepts the request first and tries to route the request to a registered ASP.NET Http Handler with that extension. For example, “http://localhost/ProductCatalog/products.es” does not work, but “http://localhost/ProductCatalog/products/1.es” does.

  Read the article

• Patch an Existing NK.BIN

  - by Kate Moss' Open Space

  As you know, we can use MAKEIMG.EXE tool to create OS Image file, NK.BIN, or ROMIMAGE.EXE with a BIB for more accurate. But what if the image file is already created but need to be patched or you want to extract a file from NK.BIN? The Platform Builder provide many useful command line utilities, and today I am going to introduce one, BINMOD.EXE. http://msdn.microsoft.com/en-us/library/ee504622.aspx is the official page for BINMOD tool. As the page says, The BinMod Tool (binmod.exe) extracts files from a run-time image, and replaces files in a run-time image and its usage binmod [-i imagename] [-r replacement_filename.ext | -e extraction_filename.ext] This is a simple tool and is easy to use, if we want to extract a file from nk.bin, just type binmod –i nk.bin –e filename.ext And that's it! Or use can try -r command to replace a file inside NK.BIN. The small tool is good but there is a limitation; due to the files in MODULES section are fixed up during ROMIMAGE so the original file format is not preserved, therefore extract or replace file in MODULE section will be impossible. So just like this small tool, this post supposed to be end here, right? Nah... It is not that easy. Just try the above example, and you will find, the tool is not work! Double check the file is in FILES section and the NK.BIN is good, but it just quits. Before you throw away this useless toy, we can try to fix it! Yes, the source of this tool is available in your CE6, private\winceos\COREOS\nk\tools\romimage\binmod. As it is a tool run in your Windows so you need to Windows SDK or Visual Studio to build the code. (I am going to save you some time by skipping the detail as building a desktop console mode program is fairly trivial) The cbinmod.cpp is the core logic for this program and follow up the error message we got, it looks like the following code is suspected.   //   // Extra sanity check...   //   if((DWORD)(HIWORD(pTOCLoc->dllfirst) << 16) <= pTOCLoc->dlllast &&       (DWORD)(LOWORD(pTOCLoc->dllfirst) << 16) <= pTOCLoc->dlllast)   {     dprintf("Found pTOC  = 0x%08x\n", (DWORD)dwpTOC);     fFoundIt = true;     break;   }    else    {     dprintf("NOTICE! Record %d looked like a TOC except DLL first = 0x%08X, and DLL last = 0x%08X\r\n", i, pTOCLoc->dllfirst, pTOCLoc->dlllast);   } The logic checks if dllfirst <= dlllast but look closer, the code only separated the high/low WORD from dllfirst but does not apply the same to dlllast, is that on purpose or a bug? While the TOC is created by ROMIMAGE.EXE, so let's move to ROMIMAGE. In private\winceos\coreos\nk\tools\romimage\romimage\bin.cpp    Module::s_romhdr.dllfirst  = (HIWORD(xip_mem->dll_data_bottom) << 16) | HIWORD(xip_mem->kernel_dll_bottom);   Module::s_romhdr.dlllast   = (HIWORD(xip_mem->dll_data_top) << 16)    | HIWORD(xip_mem->kernel_dll_top); It is clear now, the high word of dll first is the upper 16 bits of XIP DLL bottom and the low word is the upper 16 bits of kernel dll bottom; also, the high word of dll last is the upper 16 bits of XIP DLL top and the low word is the upper 16 bits of kernel dll top. Obviously, the correct statement should be if((DWORD)(HIWORD(pTOCLoc->dllfirst) << 16) <= (DWORD)(HIWORD(pTOCLoc->dlllast) << 16) &&    (DWORD)(LOWORD(pTOCLoc->dllfirst) << 16) <= (DWORD)(LOWORD(pTOCLoc->dlllast) << 16)) So update the code like this should fix this issue or just like the comment, it is an extra sanity check, you can just get rid of it, either way can make the code moving forward and everything worked as advertised.  "Extracting out copies of files from the nk.bin... replacing files... etc." Since the NK.BIN can be compressed, so the BinMod needs the compress.dll to decompress the data, the DLL can be found in C:\program files\microsoft platform builder\6.00\cepb\idevs\imgutils.

  Read the article

• Record Screen Activity with CamStudio

  - by Asian Angel

  Sometimes a visual demonstration works much better than a list of instructions. If you need to make a demo video for family and/or friends then you might want to have a look at CamStudio. Using CamStudio To get properly set up you will need to install two different files (the main program followed by the codec). Once that is done you are ready to get started. When you start the program you will see a surprisingly small window. Notice the highlighted Record to text…it serves as a visual indicator for the video type selected for recording. Before you start creating a video it would be a good idea to look through some of the settings. The first one to look at is the region or area that you want to record. Next you will want to look through the video options since these will affect the quality and final size of your video files. The default setting for quality is 70…adjust that to the level that best suits your needs. Note: For our example we maxed out the various video settings for best quality. On our system Microsoft Video 1 was listed as the default compressor but as you can see there were other options available. You can configure the settings for the compressor you want to use if desired. Keep in mind that each compressor will have unique settings of their own, so if you change it, be certain to go back and check. We decided to use the CamStudio Lossless Codec for our example (it gave the best results while trying the software). Going back to the main window you can toggle back and forth between .avi and .swf output using the last button. Once you are satisfied with the settings click on the red record button to start. If you need to pause while recording or stop recording click on the system tray icon and select the appropriate command. When you are finished recording, you will be presented with the save file window. Browse for the desired save location and name your new file. Once you have saved the file the movie player window will automatically open so that you view your new video. Our sample video shown here is at 50% of original size so may look slightly “gritty”. The detail was much better at 100%. If you decide to record and save as .swf the process will be identical to recording in .avi format until the movie player window opens. At that time the conversion process from .avi to .swf will begin. When complete you will have a new flash video and html file that goes with it. Depending on which browser you have set as default, you may run into a small problem when the preview for your new .swf file tries to open. There is a small bug in the generated html file. You can use this work-around or… Just open the .swf file directly in your favorite browser. Conclusion CamStudio may not produce the highest quality videos, but it’s free and does a very nice job nonetheless. If you are working on a tight budget or only need to make an occasional video then CamStudio is a very sensible choice. Links Download CamStudio Stable Version & CamStudio Codec *Download links are approximately half-way down the page. Download CamStudio Stable Version & CamStudio Codec at SourceForge *Beta version also available here. Similar Articles Productive Geek Tips Get the Classic Style Network Activity Indicator Back in Windows 7How To Copy a DVD with VLC 1.0ALLCapture 3.0 [Review]Listen and Record Over 12,000 Online Radio Stations with RadioSureGeek Reviews: Play And Record Internet Radio With Screamer Radio TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate

  Read the article

• Calculated Columns in Entity Framework Code First Migrations

  - by David Paquette

  I had a couple people ask me about calculated properties / columns in Entity Framework this week.  The question was, is there a way to specify a property in my C# class that is the result of some calculation involving 2 properties of the same class.  For example, in my database, I store a FirstName and a LastName column and I would like a FullName property that is computed from the FirstName and LastName columns.  My initial answer was: 1: public string FullName 2: { 3: get { return string.Format("{0} {1}", FirstName, LastName); } 4: } Of course, this works fine, but this does not give us the ability to write queries using the FullName property.  For example, this query: 1: var users = context.Users.Where(u => u.FullName.Contains("anan")); Would result in the following NotSupportedException: The specified type member 'FullName' is not supported in LINQ to Entities. Only initializers, entity members, and entity navigation properties are supported. It turns out there is a way to support this type of behavior with Entity Framework Code First Migrations by making use of Computed Columns in SQL Server.  While there is no native support for computed columns in Code First Migrations, we can manually configure our migration to use computed columns. Let’s start by defining our C# classes and DbContext: 1: public class UserProfile 2: { 3: public int Id { get; set; } 4: 5: public string FirstName { get; set; } 6: public string LastName { get; set; } 7: 8: [DatabaseGenerated(DatabaseGeneratedOption.Computed)] 9: public string FullName { get; private set; } 10: } 11: 12: public class UserContext : DbContext 13: { 14: public DbSet<UserProfile> Users { get; set; } 15: } The DatabaseGenerated attribute is needed on our FullName property.  This is a hint to let Entity Framework Code First know that the database will be computing this property for us. Next, we need to run 2 commands in the Package Manager Console.  First, run Enable-Migrations to enable Code First Migrations for the UserContext.  Next, run Add-Migration Initial to create an initial migration.  This will create a migration that creates the UserProfile table with 3 columns: FirstName, LastName, and FullName.  This is where we need to make a small change.  Instead of allowing Code First Migrations to create the FullName property, we will manually add that column as a computed column. 1: public partial class Initial : DbMigration 2: { 3: public override void Up() 4: { 5: CreateTable( 6: "dbo.UserProfiles", 7: c => new 8: { 9: Id = c.Int(nullable: false, identity: true), 10: FirstName = c.String(), 11: LastName = c.String(), 12: //FullName = c.String(), 13: }) 14: .PrimaryKey(t => t.Id); 15: Sql("ALTER TABLE dbo.UserProfiles ADD FullName AS FirstName + ' ' + LastName"); 16: } 17: 18: 19: public override void Down() 20: { 21: DropTable("dbo.UserProfiles"); 22: } 23: } Finally, run the Update-Database command.  Now we can query for Users using the FullName property and that query will be executed on the database server.  However, we encounter another potential problem. Since the FullName property is calculated by the database, it will get out of sync on the object side as soon as we make a change to the FirstName or LastName property.  Luckily, we can have the best of both worlds here by also adding the calculation back to the getter on the FullName property: 1: [DatabaseGenerated(DatabaseGeneratedOption.Computed)] 2: public string FullName 3: { 4: get { return FirstName + " " + LastName; } 5: private set 6: { 7: //Just need this here to trick EF 8: } 9: } Now we can both query for Users using the FullName property and we also won’t need to worry about the FullName property being out of sync with the FirstName and LastName properties.  When we run this code: 1: using(UserContext context = new UserContext()) 2: { 3: UserProfile userProfile = new UserProfile {FirstName = "Chanandler", LastName = "Bong"}; 4: 5: Console.WriteLine("Before saving: " + userProfile.FullName); 6: 7: context.Users.Add(userProfile); 8: context.SaveChanges(); 9:  10: Console.WriteLine("After saving: " + userProfile.FullName); 11:  12: UserProfile chanandler = context.Users.First(u => u.FullName == "Chanandler Bong"); 13: Console.WriteLine("After reading: " + chanandler.FullName); 14:  15: chanandler.FirstName = "Chandler"; 16: chanandler.LastName = "Bing"; 17:  18: Console.WriteLine("After changing: " + chanandler.FullName); 19:  20: } We get this output: It took a bit of work, but finally Chandler’s TV Guide can be delivered to the right person. The obvious downside to this implementation is that the FullName calculation is duplicated in the database and in the UserProfile class. This sample was written using Visual Studio 2012 and Entity Framework 5. Download the source code here.

  Read the article

• MySQL Connect 9 Days Away – Optimizer Sessions

  - by Bertrand Matthelié

  72 1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Following my previous blog post focusing on InnoDB talks at MySQL Connect, let us review today the sessions focusing on the MySQL Optimizer: Saturday, 11.30 am, Room Golden Gate 6: MySQL Optimizer Overview—Olav Sanstå, Oracle The goal of MySQL optimizer is to take a SQL query as input and produce an optimal execution plan for the query. This session presents an overview of the main phases of the MySQL optimizer and the primary optimizations done to the query. These optimizations are based on a combination of logical transformations and cost-based decisions. Examples of optimization strategies the presentation covers are the main query transformations, the join optimizer, the data access selection strategies, and the range optimizer. For the cost-based optimizations, an overview of the cost model and the data used for doing the cost estimations is included. Saturday, 1.00 pm, Room Golden Gate 6: Overview of New Optimizer Features in MySQL 5.6—Manyi Lu, Oracle Many optimizer features have been added into MySQL 5.6. This session provides an introduction to these great features. Multirange read, index condition pushdown, and batched key access will yield huge performance improvements on large data volumes. Structured explain, explain for update/delete/insert, and optimizer tracing will help users analyze and speed up queries. And last but not least, the session covers subquery optimizations in Release 5.6. Saturday, 7.00 pm, Room Golden Gate 4: BoF: Query Optimizations: What Is New and What Is Coming? This BoF presents common techniques for query optimization, covers what is new in MySQL 5.6, and provides a discussion forum in which attendees can tell the MySQL optimizer team which optimizations they would like to see in the future. Sunday, 1.15 pm, Room Golden Gate 8: Query Performance Comparison of MySQL 5.5 and MySQL 5.6—Øystein Grøvlen, Oracle MySQL Release 5.6 contains several improvements in the query optimizer that create improved performance for complex queries. This presentation looks at how MySQL 5.6 improves the performance of many of the queries in the DBT-3 benchmark. Based on the observed improvements, the presentation discusses what makes the specific queries perform better in Release 5.6. It describes the relevant new optimization techniques and gives examples of the types of queries that will benefit from these techniques. Sunday, 4.15 pm, Room Golden Gate 4: Powerful EXPLAIN in MySQL 5.6—Evgeny Potemkin, Oracle The EXPLAIN command of MySQL has long been a very useful tool for understanding how MySQL will execute a query. Release 5.6 of the MySQL database offers several new additions that give more-detailed information about the query plan and make it easier to understand at the same time. This presentation gives an overview of new EXPLAIN features: structured EXPLAIN in JSON format, EXPLAIN for INSERT/UPDATE/DELETE, and optimizer tracing. Examples in the session give insights into how you can take advantage of the new features. They show how these features supplement and relate to each other and to classical EXPLAIN and how and why the MySQL server chooses a particular query plan. You can check out the full program here as well as in the September edition of the MySQL newsletter. Not registered yet? You can still save US$ 300 over the on-site fee – Register Now!

  Read the article

• New Replication, Optimizer and High Availability features in MySQL 5.6.5!

  - by Rob Young

  As the Product Manager for the MySQL database it is always great to announce when the MySQL Engineering team delivers another great product release.  As a field DBA and developer it is even better when that release contains improvements and innovation that I know will help those currently using MySQL for apps that range from modest intranet sites to the most highly trafficked web sites on the web.  That said, it is my pleasure to take my hat off to MySQL Engineering for today's release of the MySQL 5.6.5 Development Milestone Release ("DMR"). The new highlighted features in MySQL 5.6.5 are discussed here: New Self-Healing Replication ClustersThe 5.6.5 DMR improves MySQL Replication by adding Global Transaction Ids and automated utilities for self-healing Replication clusters.  Prior to 5.6.5 this has been somewhat of a pain point for MySQL users with most developing custom solutions or looking to costly, complex third-party solutions for these capabilities.  With 5.6.5 these shackles are all but removed by a solution that is included with the GPL version of the database and supporting GPL tools.  You can learn all about the details of the great, problem solving Replication features in MySQL 5.6 in Mat Keep's Developer Zone article.  New Replication Administration and Failover UtilitiesAs mentioned above, the new Replication features, Global Transaction Ids specifically, are now supported by a set of automated GPL utilities that leverage the new GTIDs to provide administration and manual or auto failover to the most up to date slave (that is the default, but user configurable if needed) in the event of a master failure. The new utilities, along with links to Engineering related blogs, are discussed in detail in the DevZone Article noted above. Better Query Optimization and ThroughputThe MySQL Optimizer team continues to amaze with the latest round of improvements in 5.6.5. Along with much refactoring of the legacy code base, the Optimizer team has improved complex query optimization and throughput by adding these functional improvements: Subquery Optimizations - Subqueries are now included in the Optimizer path for runtime optimization.  Better throughput of nested queries enables application developers to simplify and consolidate multiple queries and result sets into a single unit or work. Optimizer now uses CURRENT_TIMESTAMP as default for DATETIME columns - For simplification, this eliminates the need for application developers to assign this value when a column of this type is blank by default. Optimizations for Range based queries - Optimizer now uses ready statistics vs Index based scans for queries with multiple range values. Optimizations for queries using filesort and ORDER BY.  Optimization criteria/decision on execution method is done now at optimization vs parsing stage. Print EXPLAIN in JSON format for hierarchical readability and Enterprise tool consumption. You can learn the details about these new features as well all of the Optimizer based improvements in MySQL 5.6 by following the Optimizer team blog. You can download and try the MySQL 5.6.5 DMR here. (look under "Development Releases")  Please let us know what you think!  The new HA utilities for Replication Administration and Failover are available as part of the MySQL Workbench Community Edition, which you can download here .Also New in MySQL LabsAs has become our tradition when announcing DMRs we also like to provide "Early Access" development features to the MySQL Community via the MySQL Labs.  Today is no exception as we are also releasing the following to Labs for you to download, try and let us know your thoughts on where we need to improve:InnoDB Online OperationsMySQL 5.6 now provides Online ADD Index, FK Drop and Online Column RENAME.  These operations are non-blocking and will continue to evolve in future DMRs.  You can learn the grainy details by following John Russell's blog.InnoDB data access via Memcached API ("NotOnlySQL") - Improved refresh of an earlier feature releaseSimilar to Cluster 7.2, MySQL 5.6 provides direct NotOnlySQL access to InnoDB data via the familiar Memcached API. This provides the ultimate in flexibility for developers who need fast, simple key/value access and complex query support commingled within their applications.Improved Transactional Performance, ScaleThe InnoDB Engineering team has once again under promised and over delivered in the area of improved performance and scale.  These improvements are also included in the aggregated Spring 2012 labs release:InnoDB CPU cache performance improvements for modern, multi-core/CPU systems show great promise with internal tests showing:    2x throughput improvement for read only activity 6x throughput improvement for SELECT range Read/Write benchmarks are in progress More details on the above are available here. You can download all of the above in an aggregated "InnoDB 2012 Spring Labs Release" binary from the MySQL Labs. You can also learn more about these improvements and about related fixes to mysys mutex and hash sort by checking out the InnoDB team blog.MySQL 5.6.5 is another installment in what we believe will be the best release of the MySQL database ever.  It also serves as a shining example of how the MySQL Engineering team at Oracle leads in MySQL innovation.You can get the overall Oracle message on the MySQL 5.6.5 DMR and Early Access labs features here. As always, thanks for your continued support of MySQL, the #1 open source database on the planet!

  Read the article

• Parner Webcast - Innovations in Products Program

  - by Richard Lefebvre

  We are pleased to invite you to join the Innovations in Products –webcast. Innovations in Products will present Oracle Applications' Product's new functions and features including sales positioning. The key objectives of these webcasts are to inspire System Integrator's implementation personnel to conduct successful after sales in their Customer projects. Innovations in Products will be presented on the 1st Monday of each quarter after the billable day (4:00 to 5:00 PM CET). The webcast is intended for System Integrator's Implementation Certified Specialists but Innovations in Products is open for other interested Oracle Applications system Integrator's personnel as well. At first, two Oracle representatives will discuss Oracle's contribution to Partners. Then you will see product breakout session followed by Q&A with Oracle Experts. Each session will last for maximum 1 hour. A Q&A document covering all questions and answers will be made available after the webcast. What are the Benefits for partners? Find out how Innovations in Products helps you to improve your after sales Discover new functions and features so you can enrich your Customers's solution Learn more about Oracle Applications products, especially sales positioning Hear crucial questions raised by colleague alike, learn from their interest Engage and present your questions to subject experts Be inspired of the richness of Oracle Application portfolio – for your and your customer’s benefit Note: Should you already be familiar with a specific Product, then choose another one. Doing so you would expand your knowledge of the overall Applications portfolio. Some presentations contain product demonstration, although these presentations are not intended to be extremely detailed technical presentations. Note: At the latter part of this email you have also 17 links into the recent Applications Products presentations and 6 links into the Public Sector Value Proposition presentations that were presented in Innovations in Industries -program. Product breakout sessions: Topics Speaker To Register Fusion Applications Technology and Extensibility: A next-generation platform that adapts to client needs. Matthew Johnson, Sr. Director, SCM Product Development, EMEA CLICK HERE Fusion Applications - Transforming your Back-Office Accounting Function: Changing how people work in back office functions to drive value add Liam Nolan, Director, ERP Product Development, EMEA CLICK HERE Fusion HCM & Talent Overview & Extensibility: A more in-depth look into a personalized HCM solution Synco Jonkeren, Vice-President HCM Product Development & Management, EMEA CLICK HERE Fusion HCM Compensation Planning: Compensate To Compete Rosie Warner, Director, HCM Sales Development CLICK HERE Enterprise PLM for the Product Value Chain: Oracle Enterprise PLM offers Industry specific solutions that cover the Product Value Chain Ulf Köster, Sales Development Leader Enterprise PLM, Oracle Western Europe CLICK HERE Oracle's Asset Management and Maintenance Solution: What you need to know to successfully implement Oracle Asset Management solutions within Oracle Installed Base Philip Carey, Asset Management and Maintenance Solution Specialist CLICK HERE For more details please visit Innovations in Products and other breakout sessions on OPN page. Delivery Format Innovations in Products –program is a series of FREE prerecorded Applications product presentations followed by Q&A. It will be delivered over the Web. Participants have the opportunity to submit questions during the web cast via chat and subject matter experts will provide verbal answers live. Innovations in Products consists of several parallel prerecorded product breakout sessions, each lasting for max. 1 hour. At first, two Oracle representatives will discuss Oracle’s contribution to Partners. Then you’ll see the product breakout sessions followed by Q&A with Oracle Experts. A Q&A document covering all questions and answers will be made available after the webcast. You can also see Innovations in Products afterwards as its content will be available online for the next 6-12 months. The next Innovations in Products web casts will be presented as follows: July 2nd 2012 October 1st 2012 January 14th 2013 April 8th 2013. Note: Depending on local network bandwidth please allow some seconds time the presentations to download. You might want to refresh your screen by pressing F5. Duration Maximum 1 hour For further information please contact me Markku Rouhiainen. Recent Innovations in Products presentations Applications Products presented on April the 2nd, 2012 Speaker To Register Fusion CRM: Effective, Efficient and Easy James Penfold , Senior Director, Applications Product Development and Product Management CLICK HERE Fusion HCM: Talent management overview performance, goals, talent review Jaime Losantos Viñolas, Director, HCM Sales Development CLICK HERE Distributed Order Management - Fusion SCM Solution Vikram K Singla, Business Development Director, Supply Chain Management Applications, UK CLICK HERE Oracle Transportation Management Dominic Regan, Senior Director Oracle Transportation Management EMEA CLICK HERE Oracle Value Chain Planning: Demantra Sales & Operation Planning and Demantra Demand Management Lionel Albert, Senior Director Value Chain Planning, EMEA CLICK HERE Oracle CX (Customer Experience) - formerly CEM: Powering Great Customer Experiences Maria Ramirez , CRM Presales Consultant, EPC CLICK HERE EPM 11.1.2.2 Overview Nicholas Cox , EMEA Sales Development Director - Enterprise Performance Management CLICK HERE Oracle Hyperion Profitability and Cost Management, 11.1.2.1 Daniela Lazar , Senior EPM Sales Consultant, EPC CLICK HERE January the 16th 2012 Speaker To Register CRM / ATG: Best-in-Class CRM & Commerce Maria Ramirez , Associate CRM Presales Consultant, EPC CLICK HERE CRM / Automate Business Rules for Maximum Efficiency with OPA (Oracle Policy Automation) Marco Nilo, Associate CRM Presales Consultant, EPC CLICK HERE CRM / InQuira Toby Baker, Principal Sales Consultant, CRM Product Specialist Team CLICK HERE EPM / Business Intelligence Foundation Suite – Sales and Product Updates Liviu Nitescu, Senior BI Sales Consultant, EPC CLICK HERE EPM / Hyperion Planning 11.1.2.1 - Sales & Product Updates Andreea Voinea, EPM Sales Consultant, EPC CLICK HERE ERP / JDE EnterpriseOne Fulfillment Management Overview Mirela Andreea Nasta , ERP Presales Consultant, EPC CLICK HERE ERP / Spotlights on iExpenses Elena Nita ,ERP Presales Consultant, EPC CLICK HERE MDM / Master Data Management Martin Boyd , Senior Director Product Strategy CLICK HERE Product break through session Fusion Applications Human Capital Management Rosie Warner , Director, HCM Sales Development CLICK HERE Recent Innovations in Industries Value Proposition presentations January the 16th 2012 Speaker To Register Process Modernisation Iemke Idsingh Public Sector Solutions Director CLICK HERE Shared Services Ann Smith Business Development Director, Shared Services CLICK HERE Strengthening Financial Discipline Whilst Delivering Cashable Savings Philippa Headley UK Sales Development Director Public Sector - EPM Solutions CLICK HERE Social Welfare Industry Solutions Christian Wernberg-Tougaard Industry Director - Social Welfare CLICK HERE Police Industry Solutions Jeff Penrose Solution Sales Director CLICK HERE Tax and Revenue Management Industry Solutions Andre van der Post Global Director - Tax Solutions and Strategy CLICK HERE  

  Read the article

• Justifiable Perks.

  - by Phil Factor

      I was once the director of a start-up IT Company, and had the task of recruiting a proportion of the management team. As my background was in IT management, I was rather more familiar with recruiting Geeks for technology jobs, but here, one of my early tasks was interviewing a Marketing Director.  The small group of financiers had suggested a rather strange Irishman called  Halleran.  From my background in City of London dealing-rooms, I was slightly unprepared for the experience of interviewing anyone wearing a pink suit. Many of my older City colleagues would have required resuscitation after seeing his white leather shoes. However, nobody will accuse me of prejudging an interviewee. After all, many Linux experts who I’ve come to rely on have appeared for interview dressed as hobbits. In fact, the interview went well, and we had even settled his salary.  I was somewhat unprepared for the coda.    ‘And I will need to be provided with a Ferrari  by the company.’    ‘Hmm. That seems reasonable.’    Initially, he looked startled, and then a slow smile of victory spread across his face.    ‘What colour would you like?’ I asked genially.    ‘It has to be red.’ He looked very earnest on this point.    ‘Fine. I have to go past Hamleys on the way home this evening, so I’ll pick one up then for you.’    ‘Er.. Hamley’s is a toyshop, not a Ferrari Dealership.’    I stared at him in bafflement for a few seconds. ‘You’re not seriously asking for a real Ferrari are you?’     ‘Well, yes. Not for my own sake, you understand. I’d much prefer a simple run-about, but my position demands it. How could I maintain the necessary status in the office without one? How could I do my job in marketing when my grey Datsun was all too visible in the car Park? It is a tool of the job.’    ‘Excuse me a moment, but I must confer with the MD’    I popped out to see Chris, the MD. ‘Chris, I’m interviewing a lunatic in a pink suit who is trying to demand that a Ferrari is a precondition of his employment. I tried the ‘misunderstanding trick’ but it didn’t faze him.’     ‘Sorry, Phil, but we’ve got to hire him. The VCs insist on it. You’ve got to think of something that doesn’t involve committing to the purchase of a Ferrari. Current funding barely covers the rent for the building.’    ‘OK boss. Leave it to me.’    On return, I slapped O’Halleran’s file on the table with a genial, paternalistic smile. ‘Of course you should have a Ferrari. The only trouble is that it will require a justification document that can be presented to the board. I’m sure you’ll have no problem in preparing this document in the required format.’ The initial look of despair was quickly followed by a bland look of acquiescence. He had, earlier in the interview, argued with great eloquence his skill in preparing the tiresome documents that underpin the essential corporate and government deals that were vital to the success of this new enterprise. The justification of a Ferrari should be a doddle.     After the interview, Chris nervously asked how I’d fared.     ‘I think it is all solved.’    ‘… without promising a Ferrari, I hope.’    ‘Well, I did actually; on condition he justified it in writing.’    Chris issued a stream of invective. The strain of juggling the resources in an underfunded startup was beginning to show.    ‘Don’t worry. In the unlikely event of him coming back with the required document, I’ll give him mine.’    ‘Yours?’ He strode over to the window to stare down at the car park.    He needn’t have worried: I knew that his breed of marketing man could more easily lay an ostrich egg than to prepare a decent justification document. My Ferrari is still there at the back of my garage. Few know of the Ferrari cultivator, a simple inexpensive motorized device designed for the subsistence farmers of southern Italy. It is the very devil to start, but it creates a perfect tilth for the seedbed.

  Read the article

• Rip and Convert DVD’s to an ISO Image

  - by Mysticgeek

  If you own a lot of DVD’s, you might want to convert them to an ISO image for backup and easily playing them on your media center. Today we take a look at ripping your discs using DVDFab, then using ImgBurn to create an ISO image of the ripped DVD files. Rip DVD with DVDFab6 DVDFab will remove copy protection and rip the DVD files for free. Other components in the suite require you to purchase a license after the 30 day trial, but you’ll still be able to rip DVD’s after the trial. Install DVDFab by accepting the defaults (link below)…a system restart is required to complete the install process. The first time you run it, a welcome screen is displayed. If you don’t want to see it again check the box Do not show again, then Start DVDFab.  Pop the DVD in your drive and click Next. Now select your region and check Do not show again, then OK. It will then open the DVD and begin to scan it. Under DVD to DVD you can select either Full Disc or Main Movie depending on what you want to rip. If you want to burn the DVD to a disc after it’s created select the Full Disc option. Now click the Start button to begin the ripping process. After the ripping process has completed, you’ll get a message telling you it’s waiting for you to put in a blank DVD. Since we aren’t burning the disc, just cancel the message. Click Finish and close out of DVDFab or just minimize it if you’re going to keep using it to rip another DVD. By default the temporary directory is in My Documents \ DVDFab \ Temp…however you can change it in settings. If you go to the Temp directory you’ll see the DVD files listed there… Convert Files to ISO with ImgBurn Now that we have the files ripped from the DVD, we need to convert them to an ISO image using ImgBurn (link below). Open it up and from the main menu click on Create image file from files/folders. Click on the folder icon to browse to the location of the ripped DVD files. Browse to the DVDFab temp directory and the VIDEO_TS folder for the source and click Ok. Then choose a destination directory, give the ISO a name, and click Save. In this case we ripped the Unbreakable DVD, so named it that.   So now in ImgBurn you have the source being the ripped DVD files, and the destination for the ISO…then click the Build button. If you don’t create a volume label, ImgBurn is kind enough to create on for you. If everything looks correct, click Ok. Now wait while ImgBurn goes through the process of converting the ripped DVD files to an ISO image. The process has successfully completed. The ISO image of the DVD will be in the output directory you selected earlier. Now you can burn the ISO image to a blank DVD or store it on an external hard drive for safe keeping. When you’re done, you’ll probably want to go into the temp DVDFab folder and delete the VOB and other files in the Video_TS folder as they will take up a lot of space on your hard drive.   Conclusion Although this method requires two programs to make an ISO out of a DVD, it’s extremely quick. When burning DVD’s of various lengths, it took less than 30 minutes to get the final ISO. Now, you’ll have your DVD movies backed up in case something were to happen to the discs and are no longer playable. If you use Windows Media Center to watch your movies, check out our article on how to automatically mount and view ISO files in Windows 7 Media Center. With DVDFab, you get a 30 day fully functional trial for all of its features. You’ll still be able rip DVD’s even after the 30 day trial has ended. The more we’ve been using DVDFab, the more impressed we are with its capabilities, so after the 30 day trial you should consider purchasing a license. We will have a full review of the of it to share with you soon.  Download DVDFab Download ImgBurn Similar Articles Productive Geek Tips How To Rip DVDs with VLCCalculate with Qalculate on LinuxConvert a Row to a Column in Excel the Easy WayEnjoy Quick & Easy Unit Conversion with Convert for WindowsConvert Older Excel Documents to Excel 2007 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser

  Read the article

• MD5 vertex skinning problem extending to multi-jointed skeleton (GPU Skinning)

  - by Soapy

  Currently I'm trying to implement GPU skinning in my project. So far I have achieved single joint translation and rotation, and multi-jointed translation. The problem arises when I try to rotate a multi-jointed skeleton. The image above shows the current progress. The left image shows how the model should deform. The middle image shows how it deforms in my project. The right shows a better deform (still not right) inverting a certain value, which I will explain below. The way I get my animation data is by exporting it to the MD5 format (MD5mesh for mesh data and MD5anim for animation data). When I come to parse the animation data, for each frame, I check if the bone has a parent, if not, the data is passed in as is from the MD5anim file. If it does have a parent, I transform the bones position by the parents orientation, and the add this with the parents translation. Then the parent and child orientations get concatenated. This is covered at this website. if (Parent < 0){ ... // Save this data without editing it } else { Math3::vec3 rpos; Math3::quat pq = Parent.Quaternion; Math3::quat pqi(pq); pqi.InvertUnitQuat(); pqi.Normalise(); Math3::quat::RotateVector3(rpos, pq, jv); Math3::vec3 npos(rpos + Parent.Pos); this->Translation = npos; Math3::quat nq = pq * jq; nq.Normalise(); this->Quaternion = nq; } And to achieve the image to the right, all I need to do is to change Math3::quat::RotateVector3(rpos, pq, jv); to Math3::quat::RotateVector3(rpos, pqi, jv);, why is that? And this is my skinning shader. SkinningShader.vert #version 330 core smooth out vec2 vVaryingTexCoords; smooth out vec3 vVaryingNormals; smooth out vec4 vWeightColor; uniform mat4 MV; uniform mat4 MVP; uniform mat4 Pallete[55]; uniform mat4 invBindPose[55]; layout(location = 0) in vec3 vPos; layout(location = 1) in vec2 vTexCoords; layout(location = 2) in vec3 vNormals; layout(location = 3) in int vSkeleton[4]; layout(location = 4) in vec3 vWeight; void main() { vec4 wpos = vec4(vPos, 1.0); vec4 norm = vec4(vNormals, 0.0); vec4 weight = vec4(vWeight, (1.0f-(vWeight[0] + vWeight[1] + vWeight[2]))); normalize(weight); mat4 BoneTransform; for(int i = 0; i < 4; i++) { if(vSkeleton[i] != -1) { if(i == 0) { // These are interchangable for some reason // BoneTransform = ((invBindPose[vSkeleton[i]] * Pallete[vSkeleton[i]]) * weight[i]); BoneTransform = ((Pallete[vSkeleton[i]] * invBindPose[vSkeleton[i]]) * weight[i]); } else { // These are interchangable for some reason // BoneTransform += ((invBindPose[vSkeleton[i]] * Pallete[vSkeleton[i]]) * weight[i]); BoneTransform += ((Pallete[vSkeleton[i]] * invBindPose[vSkeleton[i]]) * weight[i]); } } } wpos = BoneTransform * wpos; vWeightColor = weight; vVaryingTexCoords = vTexCoords; vVaryingNormals = normalize(vec3(vec4(vNormals, 0.0) * MV)); gl_Position = wpos * MVP; } The Pallete matrices are the matrices calculated using the above code (a rotation and translation matrix get created from the translation and quaternion). The invBindPose matrices are simply the inverted matrices created from the joints in the MD5mesh file. Update 1 I looked at GLM to compare the values I get with my own implementation. They turn out to be exactly the same. So now i'm checking if there's a problem with matrix creation... Update 2 Looked at GLM again to compare matrix creation using quaternions. Turns out that's not the problem either.

  Read the article

• using isight camera in macbookpro(8,2) on ubuntu 12.04 virtualbox VM

  - by Kurt Spindler

  I'm having a lot of trouble using the built-in isight camera on my macbookpro8,2 (early 2011) from an ubuntu 12.04 virtual machine, run inside VirtualBox. The following is the log I get when I try to run guvcview ubuntu@ubuntu:~$ guvcview guvcview 1.5.3 ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround71 ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. FaceTime HD Camera (Built-in) (location: usb-0000:00:0b.0-1) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 1/10, { pixelformat = 'MJPG', description = 'MJPEG' } { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'RGB3', description = 'RGB3' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'BGR3', description = 'BGR3' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'YU12', description = 'YU12' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'YV12', description = 'YV12' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, vid:05ac pid:8509 driver:uvcvideo checking format: 1196444237 VIDIOC_G_COMP:: Invalid argument compression control not supported fps is set to 1/25 drawing controls no codec detected for H264 no codec detected for MP3 - (lavc) Checking video mode 960x540@32bpp : OK Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable write /home/ubuntu/.guvcviewrc OK free controls cleaned allocations - 100% Closing portaudio ...OK Closing GTK... OK ubuntu@ubuntu:~$ Any help would be greatly appreciated. Only clue I have is that I initially was having problems, tried using the old method of fixing isights (involving installing isight-firmware-tools) before realizing that I just hadn't turned on the VM setting to allow the VM to access the webcam. :) Anyway, I wonder if installing that messed something up. However, I think this is a red herring because I've: shut down and turned back on the Mac, restarted the VM, tried a different VM (for which I never installed isight-firmware-tools, and created an entirely new ubuntu vm. All instances have had this problem. Similarly, other viewers, such as cheese, avplay, avconv have had all various kinds of errors.

  Read the article

• BIP and Mapviewer Mash Up I

  - by Tim Dexter

  I was out in Yellowstone last week soaking up various wildlife and a bit too much rain ... good to be back until the 95F heat yesterday. Taking a little break from the Excel templates; the dev folks are planing an Excel patch in the next week or so that will add a mass of new functionality. At the risk of completely mis leading you I'm going to hang back a while. What I have written so far holds true and will continue to do so. This week, I have been mostly eating 'mapviewer' ... answers on a post card please, TV show and character. I had a request to show how BIP can call mapviewer and render a dynamic map in an output. So I hit the books and colleagues for some answers. Mapviewer is Oracle's geographic information system, hereby known as GIS. I use it a lot in our BIEE demos where the interaction with the maps is very impressive. Need a map of California and its congressional districts? I have contacts; Jerry and David with their little black box of maps. Once in my possession I can build highly interactive, clickable maps that allow the user to drill into more information using a very friendly interface driving BIEE content and navigation. But what about maps in BIP output? Bryan Wise, who has written some articles on this blog did some work a while back with the PL/SQL API interface. The extract for the report called a function that in turn called the mapviewer server, passing a set of mapping requirements, it then returned a URL to a cached copy of that map. Easy to then have BIP render that image. Thats still very doable. You need to install a couple of packages and then load the mapviewer java APIs into the database. Then you can write your function to the APIs. A little involved? Maybe, but the database is doing all the heavy lifting for you. I thought I would investigate another method for getting the maps back into BIP. There is a URL interface you can call, this involves building an XML message to be passed to the mapviewer server. It's pretty straightforward to use on the mapviewer side. On the BIP side things are little more tricksy. After some unexpected messing about I finally got the ubiquitous Hello World map to render using the URL method. Not the most exciting map in the world, lots of ocean and a rather long URL to get it to render. http://127.0.0.1:9704/mapviewer/omserver?xml_request=%3Cmap_request%20title=%22Hello%20World%22%20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E Notice all of the encoding in the URL string to handle the spaces, quotes, etc. All necessary to get BIP to make the call to the mapviewer server correctly without truncating the URL if it hits a real space rather than a %20. With that in mind constructing the URL was pretty simple. I'm not going to get into the content of the URL too much, for that you need to bone up on the mapviewer XML API. Check out the home page here and the documentation here. To make the template portable I used the standard CURRENT_SERVER_URL parameter from the BIP server and declared that in my template. <?param@begin:CURRENT_SERVER_URL;'myserver'?> Ignore the 'myserver', that was just a dummy value for testing at runtime it will resolve to: 'http://yourserver:port/xmlpserver' Not quite what we need as mapviewer has its own server path, in my case I needed 'mapviewer/omserver?xml_request=' as the fixed path to the mapviewer request URL. A little concatenation and substringing later I came up with <?param@begin:mURL;concat(substring($CURRENT_SERVER_URL,1,22),'mapviewer/omserver?xml_request=')?> Thats the basic URL that I can then build on. To get the Hello World map I need to add the following: <map_request title="Hello World" datasource="cagis" format="GIF_STREAM"/> Those angle brackets were the source of my headache, BIPs XSLT engine was attempting to process them rather than just pass them. Hok Min to the rescue ... again. I owe him lunch when I get out to HQ again! To solve the problem, I needed to escape all the characters and white space and then use native XSL to assign the string to a parameter. <xsl:param xdofo:ctx="begin"name="pXML">%3Cmap_request%20title=%22Hello%20World%22 %20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E</xsl:param> I did not need to assign it to a parameter but I felt that if I were going to do anything more serious than Hello World like plotting points of interest on the map. I would need to dynamically build the URL, so using a set of parameters or variables that I then concatenated would be easier. Now I had the initial server string and the request all I then did was combine the two using a concat: concat($mURL,$pXML) Embedding that into an image tag: <fo:external-graphic src="url({concat($mURL,$pXML)})"/> and I was done. Notice the curly braces to get the concat evaluated prior to the image call. As you will see next time, building the XML message to go onto the URL can get quite complex but I have used it with some data. Ultimately, it would be easier to build an extension to BIP to handle the data to be plotted, it would then build the XML message, call mapviewer and return a URL to the map image for BIP to render. More on that next time ...

  Read the article

• Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore

  - by sathya

  Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore   I was really excited on attending the day 1 of Microsoft TechEd 2010 in Bangalore. This is the first Teched that am attending. The event was really fun filled with lot of knowledge sharing sessions and lots of goodies and gifts by the partners Initially the Event Started by Murthy's Session. He explained about the Developers relating to the 5 elements of nature (Pancha Boothaas) 1. Fire - Passion 2. Wave (Water) - Catch the right wave which we need to apply. 3. Earth - Connections and lots of opportunities around the world 4. Air -  Its whatever we breathe. Developers.. Without them nothing is possible. they are like the air 5. Sky - Cloud based applications   Next the Keynote and the announcement of Visual Studio by SomaSegar. List of things that he delivered his speech on : 1. Announcement of Visual Studio 2010 2. Announcement of .NET 4.0 3. Announcement of Silverlight later this week 4. What is the current Trend? Microsoft has done a research with many developers across the globe and have got the following feedback from the users. Get Lost (interrupted) - When we do some work and somebody is calling or interrepting by someother way we lose track of what we were doing and we need to do from the start Falling Behind- Technology gets updated  phenomenally over a period of time and developers always have a scenario like they are not in the state of the art technology and they always have a doubt whether they are staying updated. Lack of Collobaration - When a Manager asks a person what the team members have done and some might be done and some might not be and finally all are into a state like we dont know where we are. So they have addressed these 3 points in the VS 2010 by the following features : Get Lost - Some cool features which could overcome this. We have some Graphical interface. which could show what we have done and where we are. Some Zoom features in the code level. Falling Behind - Everything is based on .NET language base. 2010 has been built in such a way that if developers know the native language that's enough for building good applications. Lack of Collobaration - Some Dashboard Features which would show where exactly the project is. And a graphical user interface is shown on clicking which it directly drills down even to the code level. 5. An overview on all new features in VS 2010. 6. Some good demos of new features in VS 2010 by Polita and one more girl. Some of the new features included : 1. Team Explorer 2. Zoom in Code 3. Ribbon Development 4. Development in Single Platform for Windows Phone, XBox, Zune, Azure, Web Based and Windows based applications 5. Sequence Diagram Generation directly from code 6. Dashboards to show project status 7. Javascript and JQuery intellisense 8. Native support for JQuery 9. Packaging feature while deploying. 10. Generation of different versions of web.config like Web.Config.Production, Web.Config.Staging, etc. 11. IntelliTrace - Eliminating the "Not Reproducible" statement. 12. Automated User Interface Testing. At last in the closing of the day we had a great event called Demo Extravaganza, where lot of cool projects that were launched by Microsoft and also the projects that are under research were also shown. I got a lot of info about Bing today. BING really rocks!!! It has the following : 1. Visual Search 2. Product based search. For each product different menu filters were provided to make an advanced search 3. BING Maps was awesome!! It zoomed in to the street level and we can assume that we are the persons who are walking or running on the road and we can see the real objects like buildings moving by our side. 4. PhotoSynth was used in BING to show up all the images taken around the globe in a 3D format. 5. Formula - If we give some formula it automatically gives the value for the variable or derivation of expression Also some info about some kool touch apps which does an authentication and computation of Teched Attendee's Points that they have scored and the sessions attended. One guy won an XBOX in lucky draw as a gift. There were lot of Partner Stalls like Accenture,Intel,Citrix,MicroFocus,Telerik,infragistics,Sapient etc. Some Offers were provided for us like 50% off on Certifications, 1 free Elearning Course, etc. Stay tuned!! Wil update you on other events too..

  Read the article

• How to Use RDA to Generate WLS Thread Dumps At Specified Intervals?

  - by Daniel Mortimer

  Introduction There are many ways to generate a thread dump of a WebLogic Managed Server. For example, take a look at: Taking Thread Dumps - [an excellent blog post on the Middleware Magic site]or  Different ways to take thread dumps in WebLogic Server (Document 1098691.1) There is another method - use Remote Diagnostic Agent! The solution described below is not documented, but it is relatively straightforward to execute. One advantage of using RDA to collect the thread dumps is RDA will also collect configuration, log files, network, system, performance information at the same time. Instructions 1. Not familiar with Remote Diagnostic Agent? Take a look at my previous blog "Resolve SRs Faster Using RDA - Find the Right Profile" 2. Choose a profile, which includes the WebLogic Server data collection modules (for example the profile "WebLogicServer"). At RDA setup time you should see the prompt below: ------------------------------------------------------------------------------- S301WLS: Collects Oracle WebLogic Server Information ------------------------------------------------------------------------------- Enter the location of the directory where the domains to analyze are located (For example in UNIX, <BEA Home>/user_projects/domains or <Middleware Home>/user_projects/domains) Hit 'Return' to accept the default (/oracle/11AS/Middleware/user_projects/domains) > For a successful WLS connection, ensure that the domain Admin Server is up and running. Data Collection Type:   1  Collect for a single server (offline mode)   2  Collect for a single server (using WLS connection)   3  Collect for multiple servers (using WLS connection) Enter the item number Hit 'Return' to accept the default (1) > 2 Choose option 2 or 3. Note: Collect for a single server or multiple servers using WLS connection means that RDA will attempt to connect to execute online WLST commands against the targeted server(s). The thread dumps are collected using the WLST function - "threadDumps()". If WLST cannot connect to the managed server, RDA will proceed to collect other data and ignore the request to collect thread dumps. If in the final output you see no Thread Dump menu item, then it's likely that the managed server is in a state which prevents new connections to it. If faced with this scenario, you would have to employ alternative methods for collecting thread dumps. 3. The RDA setup will create a setup.cfg file in the RDA_HOME directory. Open this file in an editor. You will find the following parameters which govern the number of thread dumps and thread dump interval. #N.Number of thread dumps to capture WREQ_THREAD_DUMP=10 #N.Thread dump interval WREQ_THREAD_DUMP_INTERVAL=5000 The example lines above show the default settings. In other words, RDA will collect 10 thread dumps at 5000 millisecond (5 second) intervals. You may want to change this to something like: #N.Number of thread dumps to capture WREQ_THREAD_DUMP=10 #N.Thread dump interval WREQ_THREAD_DUMP_INTERVAL=30000 However, bear in mind, that such change will increase the total amount of time it takes for RDA to complete its run. 4. Once you are happy with the setup.cfg, run RDA. RDA will collect, render, generate and package all files in the output directory. 5. For ease of viewing, open up the RDA Start html file - "xxxx__start.htm". The thread dumps can be found under the WLST Collections for the target managed server(s). See screenshots belowScreenshot 1:RDA Start Page - Main Index Screenshot 2: Managed Server Sub Index Screenshot 3: WLST Collections Screenshot 4: Thread Dump Page - List of dump file links Screenshot 5: Thread Dump Dat File Link Additional Comment: A) You can view the thread dump files within the RDA Start Page framework, but most likely you will want to download the dat files for in-depth analysis via thread dump analysis tools such as: Thread Dump Analyzer -  Samurai - a GUI based tail , thread dump analysis tool If you are new to thread dump analysis - take a look at this recorded Support Advisor Webcast  Oracle WebLogic Server: Diagnosing Performance Issues through Java Thread Dumps[Slidedeck from webcast in PDF format]B) I have logged a couple of enhancement requests for the RDA Development Team to consider: Add timestamp to dump file links, dat filename and at the top of the body of the dat file Package the individual thread dumps in a zip so all dump files can be conveniently downloaded in one go.

  Read the article

• About Me

  - by Jeffrey West

  I’m new to blogging.  This is the second blog post that I have written, and before I go too much further I wanted the readers of my blog to know a bit more about me… Kid’s Stuff By trade, I am a programmer (or coder, developer, engineer, architect, etc).  I started programming when I was 12 years old.  When I was 7, we got our first ‘family’ computer – an Apple IIc.  It was great to play games on, and of course what else was a 7-year-old going to do with it.  I did have one problem with it, though.  When I put in my 5.25” floppy to play a game, sometimes, instead loading my game I would get a mysterious ‘]’ on the screen with a flashing cursor.  This, of course, was not my game.  Much like the standard ‘Microsoft fix’ is to reboot, back then you would take the floppy out, shake it, and restart the computer and pray for a different result. One day, I learned at school that I could topple my nemesis – the ‘]’ and flashing cursor – by typing ‘load’ and pressing enter.  Most of the time, this would load my game and then I would get to play.  Problem solved.  However, I began to wonder – what else can I make it do? When I was in 5th grade my dad got a bright idea to buy me a Tandy 1000HX.  He didn’t know what I was going to do with it, and neither did I.  Least of all, my mom wasn’t happy about buying a 5th grader a $1,000 computer.  Nonetheless, Over time, I learned how to write simple basic programs out of the back of my Math book: 10 x=5 20 y=6 30 PRINT x+y That was fun for all of about 5 minutes.  I needed more – more challenges, more things that I could make the computer do.  In order to quench this thirst my parents sent me to National Computer Camps in Connecticut.  It was one of the best experiences of my childhood, and I spent 3 weeks each summer after that learning BASIC, Pascal, Turbo C and some C++.  There weren’t many kids at the time who knew anything about computers, and lets just say my knowledge of and interest in computers didn’t score me many ‘cool’ points.  My experiences at NCC set me on the path that I find myself on now, and I am very thankful for the experience.  Real Life I have held various positions in the past at different levels within the IT layer cake.  I started out as a Software Developer for a startup in the Dallas, TX area building software for semiconductor testing statistical process control and sampling.  I was the second Java developer that was hired, and the ninth employee overall, so I got a great deal of experience developing software.  Since there weren’t that many people in the organization, I also got a lot of field experience which meant that if I screwed up the code, I got yelled at (figuratively) by both my boss AND the customer.  Fun Times!  What made it better was that I got to help run pilot programs in Taiwan, Singapore, Malaysia and Malta.  Getting yelled at in Taiwan is slightly less annoying that getting yelled at in Dallas… I spent the next 5 years at Accenture doing systems integration in the ‘SOA’ group.  I joined as a Consultant and left as a Senior Manager.  I started out writing code in WebLogic Integration and left after I wrapped up project where I led a team of 25 to develop the next generation of a digital media platform to deliver HD content in a digital format.  At Accenture, I had the pleasure of working with some truly amazing people – mentoring some and learning from many others – and on some incredible real-world IT projects.  Given my background with the BEA stack of products I was often called in to troubleshoot and tune WebLogic, ALBPM and ALSB installations and have logged many hours digging through thread dumps, running performance tests with SoapUI and decompiling Java classes we didn’t have the source for so I could see what was going on in the code. I am now a Senior Principal Product Manager at Oracle in the Application Grid practice.  The term ‘Application Grid’ refers to a collection of software and hardware products within Oracle that enables customers to build horizontally scalable systems.  This collection of products includes WebLogic, GlassFish, Coherence, Tuxedo and the JRockit/HotSpot JVMs (HotSprocket, maybe?).  Now, with the introduction of Exalogic it has grown to include hardware as well. Wrapping it up… I love technology and have a diverse background ranging from software development to HW and network architecture & tuning.  I have held certifications for being an Oracle Certified DBA, MSCE and Cisco Certified Network Professional (CCNP), among others and I have put those to great use over my career.  I am excited about programming & technology and I enjoy helping people learn and be successful.  If you are having challenges with WebLogic, BPM or Service Bus feel free to reach out to me and I’ll be happy to help as I have time. Thanks for stopping by!   --Jeff

  Read the article

• Java2Days 2012 Trip Report

  - by reza_rahman

  Java2Days 2012 was held in beautiful Sofia, Bulgaria on October 25-26. For those of you not familiar with it, this is the third installment of the premier Java conference for the Balkan region. It is an excellent effort by admirable husband and wife team Emo Abadjiev and Iva Abadjieva as well as the rest of the Java2Days team including Yoana Ivanova and Nadia Kostova. Thanks to their hard work, the conference continues to grow vigorously with almost a thousand enthusiastic, bright young people attending this year and no less than three tracks on Java, the Cloud and Mobile. The conference is a true gem in this region of the world and I am very proud to have been a part of it again, along with the other world class speakers the event rightfully attracts. It was my honor to present the first talk of the conference. It was a full-house session on Java EE 7 and 8 titled "JavaEE.Next(): Java EE 7, 8, and Beyond". The talk was primarily along the same lines as Arun Gupta's JavaOne 2012 technical keynote. I covered the changes in JMS 2, the Java API for WebSocket (JSR 356), the Java API for JSON Processing (JSON-P), JAX-RS 2, JCache, JPA 2.1, JTA 1.2, JSF 2.2, Java Batch, Bean Validation 1.1 and the rest of the APIs in Java EE 7. I also briefly talked about the possible contents of Java EE 8. My stretch goal was to gather some feedback on some open issues in the Java EE EG (more on that soon) but I ran out of time in the short format forty-five minute session. The talk was received well and I had some pretty good discussions afterwards. The slides for the talk are here: JavaEE.Next(): Java EE 7, 8, and Beyond from reza_rahman To my delight, the Java2Days folks were very interested in my domain-driven design/Java EE 6 talk (titled "Domain Driven Design with Java EE 6"). I've had this talk in my inventory for a long time now but it always gets overridden by less theoretical talks on APIs, tools, etc. The talk has three parts -- a brief overview of DDD theory, mapping DDD to Java EE and actual running DDD code in Java EE 6/GlassFish. For the demo, I converted the well-known DDD sample application (http://dddsample.sourceforge.net/) written mostly in Spring 2 and Hibernate 2 to Java EE 6. My eventual plan is to make the code available via a top level java.net project. Even despite the broad topic and time constraints, the talk went very well. It was a full house, the Q & A was excellent and one of the other speakers even told me they thought this was the best talk of the conference! The slides for the talk are here: Domain Driven Design with Java EE 6 from Reza Rahman The code examples are available here: https://blogs.oracle.com/reza/resource/dddsample.zip for now, as a simple zip file. Give me a shout if you would like to get it up and running. It was also a great honor to present the last session of the conference. It was a talk on the Java API for WebSocket/JSR 356 titled "Building HTML5/WebSocket Applications with JSR 356 and GlassFish". The talk is based on Danny Coward's JavaOne 2012 talk. The talk covers the basic of WebSocket, the JSR 356 API and a simple demo using Tyrus/GlassFish. The talk went very well and there were some very good questions afterwards. The slides for the talk are here: Building HTML5/WebSocket Applications with GlassFish and JSR 356 from Reza Rahman The code samples are available here: https://blogs.oracle.com/arungupta/resource/totd183-HelloWebSocket.zip. You'll need the latest promoted GlassFish 4 build to run the code. Give me a shout if you need help. Besides presenting my talks, I got to attend some great sessions on OSGi, HTML5, cloud, agile and Java 8. I got an invite to speak at the Macedonia JUG when possible. Victor Grazi of InfoQ wrote about my sessions and Java2Days here: http://www.infoq.com/news/2012/11/Java2DaysConference. Stoyan Rachev was very kind to blog about my sessions here: http://www.stoyanr.com/2012/11/java2days-2012-java-ee.html. I definitely enjoyed Java2Days 2012 and hope to be part of the conference next year!

  Read the article

• ASP.NET WebAPI Security 4: Examples for various Authentication Scenarios

  - by Your DisplayName here!

  The Thinktecture.IdentityModel.Http repository includes a number of samples for the various authentication scenarios. All the clients follow a basic pattern: Acquire client credential (a single token, multiple tokens, username/password). Call Service. The service simply enumerates the claims it finds on the request and returns them to the client. I won’t show that part of the code, but rather focus on the step 1 and 2. Basic Authentication This is the most basic (pun inteneded) scenario. My library contains a class that can create the Basic Authentication header value. Simply set username and password and you are good to go. var client = new HttpClient { BaseAddress = _baseAddress }; client.DefaultRequestHeaders.Authorization = new BasicAuthenticationHeaderValue("alice", "alice"); var response = client.GetAsync("identity").Result; response.EnsureSuccessStatusCode();   SAML Authentication To integrate a Web API with an existing enterprise identity provider like ADFS, you can use SAML tokens. This is certainly not the most efficient way of calling a “lightweight service” ;) But very useful if that’s what it takes to get the job done. private static string GetIdentityToken() {     var factory = new WSTrustChannelFactory(         new WindowsWSTrustBinding(SecurityMode.Transport),         _idpEndpoint);     factory.TrustVersion = TrustVersion.WSTrust13;     var rst = new RequestSecurityToken     {         RequestType = RequestTypes.Issue,         KeyType = KeyTypes.Bearer,         AppliesTo = new EndpointAddress(Constants.Realm)     };     var token = factory.CreateChannel().Issue(rst) as GenericXmlSecurityToken;     return token.TokenXml.OuterXml; } private static Identity CallService(string saml) {     var client = new HttpClient { BaseAddress = _baseAddress };     client.DefaultRequestHeaders.Authorization = new AuthenticationHeaderValue("SAML", saml);     var response = client.GetAsync("identity").Result;     response.EnsureSuccessStatusCode();     return response.Content.ReadAsAsync<Identity>().Result; }   SAML to SWT conversion using the Azure Access Control Service Another possible options for integrating SAML based identity providers is to use an intermediary service that allows converting the SAML token to the more compact SWT (Simple Web Token) format. This way you only need to roundtrip the SAML once and can use the SWT afterwards. The code for the conversion uses the ACS OAuth2 endpoint. The OAuth2Client class is part of my library. private static string GetServiceTokenOAuth2(string samlToken) {     var client = new OAuth2Client(_acsOAuth2Endpoint);     return client.RequestAccessTokenAssertion(         samlToken,         SecurityTokenTypes.Saml2TokenProfile11,         Constants.Realm).AccessToken; }   SWT Authentication When you have an identity provider that directly supports a (simple) web token, you can acquire the token directly without the conversion step. Thinktecture.IdentityServer e.g. supports the OAuth2 resource owner credential profile to issue SWT tokens. private static string GetIdentityToken() {     var client = new OAuth2Client(_oauth2Address);     var response = client.RequestAccessTokenUserName("bob", "abc!123", Constants.Realm);     return response.AccessToken; } private static Identity CallService(string swt) {     var client = new HttpClient { BaseAddress = _baseAddress };     client.DefaultRequestHeaders.Authorization = new AuthenticationHeaderValue("Bearer", swt);     var response = client.GetAsync("identity").Result;     response.EnsureSuccessStatusCode();     return response.Content.ReadAsAsync<Identity>().Result; }   So you can see that it’s pretty straightforward to implement various authentication scenarios using WebAPI and my authentication library. Stay tuned for more client samples!

  Read the article

• Enable DreamScene in Any Version of Vista or Windows 7

  - by DigitalGeekery

  Windows DreamScene was a utility available for Vista Ultimate that allowed users to set video as desktop wallpaper. It was dropped in Windows 7, but we’ll take a look at how to play DreamScenes in all versions of Windows 7 or Vista. Downloading DreamScenes First, you’ll need to find some DreamScenes to download. We’ve found some nice ones at both DreamScene.org and DeviantArt. You can find those download links at the end of the article. They’ll come as compressed files, so you’ll need to extract them after downloading. Windows 7 DreamScene Activator If you are running Windows 7 you can use Windows 7 DreamScene Activator. This free portable utility enables DreamScene in both 32 & 64 bit versions of Windows 7. Users can then set either MPG or WMV files as desktop wallpaper. Download and extract the Windows 7 DreamScene Activator (link below). Once extracted, you’ll need to run the application as administrator. Right-click on the .exe and select Run as administrator. Click on Enable DreamScene. This will also restart Windows Explorer if it is open. To play your DreamScene, browse for the file in Windows Explorer, right-click the file and select Set as Desktop Background. Enjoy your new Windows 7 DreamScene.   Although it says it is for Windows 7 only, we were able to get it to work with no problems on Vista Home Premium x32 as well.   You can Pause the DreamScene at anytime by right-clicking on the desktop and selecting Pause DreamScene.   When you are ready for a change, click Disable DreamScene and switch back to your previous wallpaper. Using VLC Media Player Users of all versions of Windows 7 & Vista can enable a DreamScene using VLC. Recently, we showed you how to set a video as your desktop wallpaper in VLC.  Since DreamScenes are in MPEG or WMV format, we will use the same tactic to display them as desktop wallpaper. We’ll just need to make a few additional tweaks to the VLC settings. You’ll need to download and install VLC media player if you don’t already have it. You can find the download link below. Next, select Tools > Preferences from the Menu. Select the Video button on the left and then choose DirectX video output from the Output dropdown list. Next, select All under Show Settings at the lower left, then select the Video button on the left pane. Uncheck Show media title on video. This will prevent VLC from constantly showing the title of the video on the screen each time the video loops. Click Save and the restart VLC.   Now we will add the video to our playlist and set it to continuously loop. Select View > Playlist from the Menu. Select the Add file button from the bottom of the Playlist window and select Add file.   Browse for your file and click Open.   Click the Loop button at the bottom so the video plays in a continuous loop.   Now, we’re ready to play the video. After the video starts playing, select Video > DirectX Wallpaper from the Menu, then minimize VLC.   If you’re using Aero Themes, you may get a pop-up warning and Windows will switch automatically to a basic theme.   If looping one video gets to be a little repetitive, you can add multiple videos to your playlist in VLC and loop the entire playlist. Just make sure you toggle the Loop button on the playlist window to Loop All. Now you’ve got a nice DreamScene playing on your desktop. Another cool trick you can do with VLC is take snapshots of favorite movie scenes and set them as backgrounds. When you’re ready to go back to your old wallpaper, maximize VLC, select Video and click DirectX Wallpaper again to turn it off the video background. Occasionally we were left with a black screen and had to manually change our wallpaper back to normal even after turning off the DirectX Wallpaper. Note: Keep in mind that using the VLC method takes up a lot of resources so if you try to run it on older hardware, or say a netbook, you’re not going to get good results. We also tried to use the VLC method in XP, but couldn’t get it to work. If you have leave a comment and let us know. While the DreamScene feature never really caught on in Vista, we find them to be a cool way to pump a little life into your desktop on any version of Vista or Windows 7. Downloads DreamScenes from Dreamscene.org DreamScenes from DeviantArt Download VLC media player Windows 7 DreamScene Activator Similar Articles Productive Geek Tips Wait, How do I Turn on DreamScene Again?Enable Run Command on Windows 7 or Vista Start MenuEnable or Disable UAC From the Windows 7 / Vista Command LineUnderstanding Windows Vista Aero Glass RequirementsEnable Mapping to \HostnameC$ Share on Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace

  Read the article

• Integrating Windows Form Click Once Application into SharePoint 2007 &ndash; Part 2 of 4

  - by Kelly Jones

  In my last post, I explained why we decided to use a Click Once application to solve our business problem. To quickly review, we needed a way for our business users to upload documents to a SharePoint 2007 document library in mass, set the meta data, set the permissions per document, and to do so easily. Let’s look at the pieces that make up our solution.  First, we have the Windows Form application.  This app is deployed using Click Once and calls SharePoint web services in order to upload files and then calls web services to set the meta data (SharePoint columns and permissions).  Second, we have a custom action.  The custom action is responsible for providing our users a link that will launch the Windows app, as well as passing values to it via the query string.  And lastly, we have the web services that the Windows Form application calls.  For our solution, we used both out of the box web services and a custom web service in order to set the column values in the document library as well as the permissions on the documents. Now, let’s look at the technical details of each of these pieces.  (All of the code is downloadable from here: )   Windows Form application deployed via Click Once The Windows Form application, called “Custom Upload”, has just a few classes in it: Custom Upload -- the form FileList.xsd -- the dataset used to track the names of the files and their meta data values SharePointUpload -- this class handles uploading the file SharePointUpload uses an HttpWebRequest to transfer the file to the web server. We had to change this code from a WebClient object to the HttpWebRequest object, because we needed to be able to set the time out value.  public bool UploadDocument(string localFilename, string remoteFilename) { bool result = true; //Need to use an HttpWebRequest object instead of a WebClient object // so we can set the timeout (WebClient doesn't allow you to set the timeout!) HttpWebRequest req = (HttpWebRequest)WebRequest.Create(remoteFilename); try { req.Method = "PUT"; req.Timeout = 60 * 1000; //convert seconds to milliseconds req.AllowWriteStreamBuffering = true; req.Credentials = System.Net.CredentialCache.DefaultCredentials; req.SendChunked = false; req.KeepAlive = true; Stream reqStream = req.GetRequestStream(); FileStream rdr = new FileStream(localFilename, FileMode.Open, FileAccess.Read); byte[] inData = new byte[4096]; int bytesRead = rdr.Read(inData, 0, inData.Length); while (bytesRead > 0) { reqStream.Write(inData, 0, bytesRead); bytesRead = rdr.Read(inData, 0, inData.Length); } reqStream.Close(); rdr.Close(); System.Net.HttpWebResponse response = (HttpWebResponse)req.GetResponse(); if (response.StatusCode != HttpStatusCode.OK && response.StatusCode != HttpStatusCode.Created) { String msg = String.Format("An error occurred while uploading this file: {0}\n\nError response code: {1}", System.IO.Path.GetFileName(localFilename), response.StatusCode.ToString()); LogWarning(msg, "2ACFFCCA-59BA-40c8-A9AB-05FA3331D223"); result = false; } } catch (Exception ex) { LogException(ex, "{E9D62A93-D298-470d-A6BA-19AAB237978A}"); result = false; } return result; } The class also contains the LogException() and LogWarning() methods. When the application is launched, it parses the query string for some initial values.  The query string looks like this: string queryString = "Srv=clickonce&Sec=N&Doc=DMI&SiteName=&Speed=128000&Max=50"; This Srv is the path to the server (my Virtual Machine is name “clickonce”), the Sec is short for security – meaning HTTPS or HTTP, the Doc is the shortcut for which document library to use, and SiteName is the name of the SharePoint site.  Speed is used to calculate an estimate for download speed for each file.  We added this so our users uploading documents would realize how long it might take for clients in remote locations (using slow WAN connections) to download the documents. The last value, Max, is the maximum size that the SharePoint site will allow documents to be.  This allowed us to give users a warning that a file is too large before we even attempt to upload it. Another critical piece is the meta data collection.  We organized our site using SharePoint content types, so when the app loads, it gets a list of the document library’s content types.  The user then select one of the content types from the drop down list, and then we query SharePoint to get a list of the fields that make up that content type.  We used both an out of the box web service, and one that we custom built, in order to get these values. Once we have the content type fields, we then add controls to the form.  Which type of control we add depends on the data type of the field.  (DateTime pickers for date/time fields, etc)  We didn’t write code to cover every data type, since we were working with a limited set of content types and field data types. Here’s a screen shot of the Form, before and after someone has selected the content types and our code has added the custom controls:     The other piece of meta data we collect is the in the upper right corner of the app, “Users with access”.  This box lists the different SharePoint Groups that we have set up and by checking the boxes, the user can set the permissions on the uploaded documents. All of this meta data is collected and submitted to our custom web service, which then sets the values on the documents on the list.  We’ll look at these web services in a future post. In the next post, we’ll walk through the Custom Action we built.

  Read the article

• Highlights from the Oracle Customer Experience Summit @ OpenWorld

  - by Kathryn Perry

  A guest post by David Vap, Group Vice President, Oracle Applications Product Development The Oracle Customer Experience Summit was the first-ever event covering the full breadth of Oracle's CX portfolio -- Marketing, Sales, Commerce, and Service. The purpose of the Summit was to articulate the customer experience imperative and to showcase the suite of Oracle products that can help our customers create the best possible customer experience. This topic has always been a very important one, but now that there are so many alternative companies to do business with and because people have such public ways to voice their displeasure, it's necessary for vendors to have multiple listening posts in place to gauge consumer sentiment. They need to know what is going on in real time and be able to react quickly to turn negative situations into positive ones. Those can then be shared in a social manner to enhance the brand and turn the customer into a repeat customer. The Summit was focused on Oracle's portfolio of products and entirely dedicated to customers who are committed to building great customer experiences within their businesses. Rather than DBAs, the attendees were business people looking to collaborate with other like-minded experts and find out how Oracle can help in terms of technology, best practices, and expertise. The event was at the Westin St. Francis Hotel in San Francisco as part of Oracle OpenWorld. We had eight hundred people attend, which was great for the first year. Next year, there's no doubt in my mind, we can raise that number to 5,000. Alignment and Logic Oracle's Customer Experience portfolio is made up of a combination of acquired and organic products owned by many people who are new to Oracle. We include homegrown Fusion CRM, as well as RightNow, Inquira, OPA, Vitrue, ATG, Endeca, and many others. The attendees knew of the acquisitions, so naturally they wanted to see how the products all fit together and hear the logic behind the portfolio. To tell them about our alignment, we needed to be aligned. To accomplish that, a cross functional team at Oracle agreed on the messaging so that every single Oracle presenter could cover the big picture before going deep into a product or topic. Talking about the full suite of products in one session produced overflow value for other products. And even though this internal coordination was a huge effort, everyone saw the value for our customers and for our long-term cooperation and success. Keynotes, Workshops, and Tents of Innovation We scored by having Seth Godin as our keynote speaker ? always provocative and popular. The opening keynote was a session orchestrated by Mark Hurd, Anthony Lye, and me. Mark set the stage by giving real-world examples of bad customer experiences, Anthony clearly articulated the business imperative for addressing these experiences, and I brought it all to life by taking the audience around the Customer Lifecycle and showing demos and videos, with partners included at each of the stops around the lifecycle. Brian Curran, a VP for RightNow Product Strategy, presented a session that was in high demand called The Economics of Customer Experience. People loved hearing how to build a business case and justify the cost of building a better customer experience. John Kembel, another VP for RightNow Product Strategy, held a workshop that customers raved about. It was based on the journey mapping methodology he created, which is a way to talk to customers about where they want to make improvements to their customers' experiences. He divided the audience into groups led by facilitators. Each person had the opportunity to engage with experts and peers and construct some real takeaways. From left to right: Brian Curran, John Kembel, Seth Godin, and George Kembel The conference hotel was across from Union Square so we used that space to set up Innovation Tents. During the day we served lunch in the tents and partners showed their different innovative ideas. It was very interesting to see all the technologies and advancements. It also gave people a place to mix and mingle and to think about the fringe of where we could all take these ideas. Product Portfolio Plus Thought Leadership Of course there is always room for improvement, but the feedback on the format of the conference was positive. Ninety percent of the sessions had either a partner or a customer teamed with an Oracle presenter. The presentations weren't dry, one-way information dumps, but more interactive. I just followed up with a CEO who attended the conference with his Head of Marketing. He told me that they are using John Kembel's journey mapping methodology across the organization to pull people together. This sort of thought leadership in these highly competitive areas gives Oracle permission to engage around the technology. We have to differentiate ourselves and it's harder to do on the product side because everyone looks the same on paper. But on thought leadership ? we can, and did, take some really big steps. David VapGroup Vice PresidentOracle Applications Product Development

  Read the article

• Ok it has been pointed out to me

  - by Ratman21

  That it seems my blog is more of poor me or pity me or I deserve a job blog.   Hmmm I wont say, I have not wined here as I have used this blog to vent my frustration on the whole out of work thing (lack of money, self worth, family issues and the never end bills coming my way) but, it was also me trying to reach to others in the same boat as well as advertising, hay I am out here, employers.   It was also said, that I don’t have any thing listed here on me, like a cover letter or resume. Well there is but, it was so many months and post ago. Also what I had posted is not current. So here is my most current cover and resume.   Scott L Newman 45219 Dutton Way Callahan, Fl. 32011 To Whom It May Concern: I am really interested in the IT vacancie that you have listed for your company. Maybe I don’t have all the qualifications you want (hold on don’t hit delete yet) yet! But maybe I do, as I have over 20 + years experience in "IT” RIGHT NOW.   Read the rest of my cover and my resume. You will see what my “IT” skills are and it will Show that I can to this work! I can bring to your company along with my, can do attitude, a broad range of skills, including: Certified CompTIA A+, Security+  and Network+ Technician §         2.5 years (NOC) Network experience on large Cisco based Wan – UK to Austria §         20 years experience MIS/DP – Yes I can do IBM mainframes and Tandem  non-stops too §         18 years experience as technical Help Desk support – panicking users, no problem §         18 years experience with PC/Server based system, intranet and internet systems §         10+ years experienced on: Microsoft Office, Windows XP and Data Network Fundamentals (YES I do windows) §         Strong trouble shooting skills for software, hard ware and circuit issues (and I can tell you what kind of horrors I had to face on all of them). §         Very experienced on working with customers on problems – again panicking users, no problem §         Working experience with Remote Access (VPN/SecurID) – I didn’t just study them I worked on/with them §         Skilled in getting info for and creating documentation for Operation procedures (I don’t just wait for them to give it to me I go out and get it. Waiting for info on working applications is, well dumb) Multiple software languages (Hey I have done some programming) And much more experiences in “IT” (Mortgage, stocks and financial information systems experience and have worked “IT” in a hospital) Can multitask, also have ability to adapt to change and learn quickly. (once was put in charge of a system that I had not worked with for over two years. Talk about having to relearn and adapt to changes but, I did it.) I would welcome the opportunity to further discuss this position with you. If you have questions or would like to schedule an interview, please contact me by phone at 904-879-4880 or on my cell 352-356-0945 or by e-mail at [email protected] or leave a message on my web site (http://beingscottnewman.webs.com/). I have enclosed/attached my resume for your review and I look forward to hearing from you.   Thank you for taking a moment to consider my cover letter and resume. I appreciate how busy you are. Sincerely, Scott L. Newman    Scott L. Newman 45219 Dutton Way, Callahan, FL 32011? H (904)879-4880 C (352)356-0945 ? [email protected] Web - http://beingscottnewman.webs.com/                                                       ______                                                                                       OBJECTIVE To obtain a Network Operation or Helpdesk position.     PROFILE Information Technology Professional with 20+ years of experience. Volunteer website creator and back-up sound technician at True Faith Christian Fellowship. CompTIA A+, Network+ and Security+ Certified.   TECHNICAL AND PROFESSIONAL SKILLS   §         Technical Support §         Frame Relay §         Microsoft Office Suite §         Inventory Management §         ISDN §         Windows NT/98/XP §         Client/Vendor Relations §         CICS §         Cisco Routers/Switches §         Networking/Administration §         RPG §         Helpdesk §         Website Design/Dev./Management §         Assembler §         Visio §         Programming §         COBOL IV §               EDUCATION ? New HorizonsComputerLearningCenter, Jacksonville, Florida – CompTIA A+, Security+ and Network+ Certified.             Currently working on CCNA Certification ?MottCommunity College, Flint, Michigan – Associates Degree - Data Processing and General Education ? Currently studying Japanese     PROFESSIONAL             TrueFaithChristianFellowshipChurch – Callahan, FL, October 2009 – Present Web site Tech ·        Web site Creator/tech, back up song leader and back up sound technician. Note church web site is (http://ambassadorsforjesuschrist.webs.com/) U.S. Census (temp employee) Feb. 23 to March 8, 2010 ·        Enumerator for NassauCounty   ThomasCreekBaptistChurch – Callahan, FL,     June 2008 – September 2009 Churchsound and video technician      ·        sound and video technician           Fidelity National Information Services ? Jacksonville, FL ? February 01, 2005 to October 28, 2008 Client Server Dev/Analyst I ·        Monitored Multiple Debit Card sites, Check Authorization customers and the Card Auth system (AuthNet) for problems with the sites, connections, servers (on our LAN) and/or applications ·        Night (NOC) Network operator for a large Wide Area Network (WAN) ·        Monitored Multiple Check Authorization customers for problems with circuits, routers and applications ·        Resolved circuit and/or router issues or assist circuit carrier in resolving issue ·        Resolved application problems or assist application support in resolution ·        Liaison between customer and application support ·        Maintained and updated the NetOps Operation procedures Guide ·        Kept the listing of equipment on the raised floor updated ·        Involved in the training of all Night Check and Card server operation operators ·        FNIS acquired Certegy in 2005. Was one of 3 kept on.   Certegy ? St.Pete, FL ? August 31, 2003 to February 1, 2005 Senior NetOps Operator(FNIS acquired Certegy in 2005 all of above jobs/skills were same as listed in FNIS) ·        Converting Documentation to Adobe format ·        Sole trainer of day/night shift System Management Center operators (SMC) ·        Equifax spun off Card/Check Dept. as Certegy. Certegy terminated contract with EDS. One of six in the whole IT dept that was kept on.   EDS  (Certegy Account) ? St.Pete, FL ? July 1, 1999 to August 31, 2003 Senior NetOps Operator ·        Equifax outsourced the NetOps dept. to EDS in 1999. ·        Same job skills as listed above for FNIS.   Equifax ? St.Pete&Tampa, FL ? January 1, 1991 to July 1, 1999 NetOps/Tandem Operator ·        All of the above for FNIS, except for circuit and router issues ·        Operated, monitored and trouble shot Tandem mainframe and servers on LAN ·        Supported in the operation of the Print, Tape and Microfiche rooms ·        Equifax acquired TelaCredit in 1991.   TelaCredit ? Tampa, FL ? June 28, 1989 to January 1, 1991 Tandem Operator ·        Operated and monitored Tandem Non-stop systems for Card and Check Auths ·        Operated multiple high-speed Laser printers and Microfiche printers ·        Mounted, filed and maintained 18 reel-to-reel mainframe tape drives, cartridges tape drives and tape library.

  Read the article

• Unmet Dependencies with kdelibs5-data

  - by Jitesh

  I was trying to install Amarok 1.4 on Ubuntu 12.04 (Gnome-classic), by following this instructions. Problem started after giving these two commands dpkg -i kdelibs5-data_4.6.2-0ubuntu4_all.deb dpkg -i kdelibs-data_3.5.10.dfsg.1-5ubuntu2_all.deb Now, immediately after these commands, Ubuntu Updater popped up and gave me an error that the package catalog is broken and needs to be repaired. Nothing can be installed or removed till then. It also offered a suggestion to run apt-get install -f. I tried that, but again got the same error.Also tried apt-get clean followed by apt-get install -f. Again got the following output: jitesh@jitesh-desktop:~$ sudo apt-get clean jitesh@jitesh-desktop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: kdelibs5-data The following packages will be upgraded: kdelibs5-data 1 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. 2 not fully installed or removed. Need to get 2,832 kB of archives. After this operation, 2,998 kB disk space will be freed. Do you want to continue [Y/n]? y Get:1 http: //in.archive.ubuntu.com/ubuntu/precise-updates/main kdelibs5-data all 4:4.8.4a-0ubuntu0.2 [2,832 kB] Fetched 2,832 kB in 32s (86.6 kB/s) dpkg: dependency problems prevent configuration of kdelibs5-data: libplasma3 (4:4.8.4a-0ubuntu0.2) breaks kdelibs5-data (<< 4:4.6.80~) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. kate-data (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. katepart (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. dpkg: error processing kdelibs5-data (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of kdelibs-data: kdelibs-data depends on kdelibs5-data; however: Package kdelibs5-data is not configured yet. No apport report written because MaxReports is reached already dpkg: error processing kdelibs-data (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: kdelibs5-data kdelibs-data W: Duplicate sources.list entry http://archive.canonical.com/ubuntu/ precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages) W: You may want to run apt-get update to correct these problems E: Sub-process /usr/bin/dpkg returned an error code (1) As I thought the error was related to configuring kdelibs, I tried to configure using dpkg. But got the following errors: jitesh@jitesh-desktop:~$ sudo dpkg --configure -a dpkg: dependency problems prevent configuration of kdelibs5-data: libplasma3 (4:4.8.4a-0ubuntu0.2) breaks kdelibs5-data (<< 4:4.6.80~) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. kate-data (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. katepart (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. dpkg: error processing kdelibs5-data (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of kdelibs-data: kdelibs-data depends on kdelibs5-data; however: Package kdelibs5-data is not configured yet. dpkg: error processing kdelibs-data (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: kdelibs5-data kdelibs-data jitesh@jitesh-desktop:~$ Now I dont have any idea how to proceed. I am unable to install anything from Software Centre or using Terminal now. Some basic info: Core2Duo, dual booting Ubuntu 12.04 with Win7. Fresh install of Ubuntu 12.04 (not upgrade). Incidentally, I had first upgraded from 10.04 and had succesfully installed Amarok 1.4 following this same method. But due to other issues, i had to format and do a clean install of 12.04. Now when I tried to install Amarok 1.4, I'm getting these errors. I also have digiKam and k3b installed, if that can be of any help. I use digiKam a lot, so removing KDE is not feasible for me. Any help on this issue will be highly appreciated. Thanks in advance.

  Read the article

• Auto-Configuring SSIS Packages

  - by Davide Mauri

  SSIS Package Configurations are very useful to make packages flexible so that you can change objects properties at run-time and thus make the package configurable without having to open and edit it. In a complex scenario where you have dozen of packages (even in in the smallest BI project I worked on I had 50 packages), each package may have its own configuration needs. This means that each time you have to run the package you have to pass the correct Package Configuration. I usually use XML configuration files and I also force everyone that works with me to make sure that an object that is used in several packages has the same name in all package where it is used, in order to simplify configurations usage. Connection Managers are a good example of one of those objects. For example, all the packages that needs to access to the Data Warehouse database must have a Connection Manager named DWH. Basically we define a set of “global” objects so that we can have a configuration file for them, so that it can be used by all packages. If a package as some specific configuration needs, we create a specific – or “local” – XML configuration file or we set the value that needs to be configured at runtime using DTLoggedExec’s Package Parameters: http://dtloggedexec.davidemauri.it/Package%20Parameters.ashx Now, how we can improve this even more? I’d like to have a package that, when it’s run, automatically goes “somewhere” and search for global or local configuration, loads it and applies it to itself. That’s the basic idea of Auto-Configuring Packages. The “somewhere” is a SQL Server table, defined in this way In this table you’ll put the values that you want to be used at runtime by your package: The ConfigurationFilter column specify to which package that configuration line has to be applied. A package will use that line only if the value specified in the ConfigurationFilter column is equal to its name. In the above sample. only the package named “simple-package” will use the line number two. There is an exception here: the $$Global value indicate a configuration row that has to be applied to any package. With this simple behavior it’s possible to replicate the “global” and the “local” configuration approach I’ve described before. The ConfigurationValue contains the value you want to be applied at runtime and the PackagePath contains the object to which that value will be applied. The ConfiguredValueType column defined the data type of the value and the Checksum column is contains a calculated value that is simply the hash value of ConfigurationFilter plus PackagePath so that it can be used as a Primary Key to guarantee uniqueness of configuration rows. As you may have noticed the table is very similar to the table originally used by SSIS in order to put DTS Configuration into SQL Server tables: SQL Server SSIS Configuration Type: http://msdn.microsoft.com/en-us/library/ms141682.aspx Now, how it works? It’s very easy: you just have to call DTLoggedExec with the /AC option: DTLoggedExec.exe /FILE:”mypackage.dtsx” /AC:"localhost;ssis_auto_configuration;ssiscfg.configuration" the AC option expects a string with the following format: <database_server>;<database_name>;<table_name>; only Windows Authentication is supported. When DTLoggedExec finds an Auto-Configuration request, it injects a new connection manager in the loaded package. The injected connection manager is named $$DTLoggedExec_AutoConfigure and is used by the two SQL Server DTS Configuration ($$DTLoggedExec_Global and $$DTLoggedExec_Local) also injected by DTLoggedExec, used to load “local” and “global” configuration. Now, you may start to wonder why this approach cannot be used without having all this stuff going around, but just passing to a package always two XML DTS Configuration files, (to have to “local” and the “global” configurations) doing something like this: DTLoggedExec.exe /FILE:”mypackage.dtsx” /CONF:”global.dtsConfig” /CONF:”mypackage.dtsConfig” The problem is that this approach doesn’t work if you have, in one of the two configuration file, a value that has to be applied to an object that doesn’t exists in the loaded package. This situation will raise an error that will halt package execution. To solve this problem, you may want to create a configuration file for each package. Unfortunately this will make deployment and management harder, since you’ll have to deal with a great number of configuration files. The Auto-Configuration approach solve all these problems at once! We’re using it in a project where we have hundreds of packages and I can tell you that deployment of packages and their configuration for the pre-production and production environment has never been so easy! To use the Auto-Configuration option you have to download the latest DTLoggedExec release: http://dtloggedexec.codeplex.com/releases/view/62218 Feedback, as usual, are very welcome!

  Read the article

• Win32 and Win64 programming in C sources?

  - by Nick Rosencrantz

  I'm learning OpenGL with C and that makes me include the windows.h file in my project. I'd like to look at some more specific windows functions and I wonder if you can cite some good sources for learning the basics of Win32 and Win64 programming in C (or C++). I use MS Visual C++ and I prefer to stick with C even though much of the Windows API seems to be C++. I'd like my program to be portable and using some platform-indepedent graphics library like OpenGL I could make my program portable with some slight changes for window management. Could you direct me with some pointers to books or www links where I can find more info? I've already studied the OpenGL red book and the C programming language, what I'm looking for is the platform-dependent stuff and how to handle that since I run both Linux and Windows where I find the development environment Visual Studio is pretty good but the debugger gdb is not available on windows so it's a trade off which environment i'll choose in the end - Linux with gcc or Windows with MSVC. Here is the program that draws a graphics primitive with some use of windows.h This program is also runnable on Linux without changing the code that actually draws the graphics primitive: #include <windows.h> #include <gl/gl.h> LRESULT CALLBACK WindowProc(HWND, UINT, WPARAM, LPARAM); void EnableOpenGL(HWND hwnd, HDC*, HGLRC*); void DisableOpenGL(HWND, HDC, HGLRC); int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow) { WNDCLASSEX wcex; HWND hwnd; HDC hDC; HGLRC hRC; MSG msg; BOOL bQuit = FALSE; float theta = 0.0f; /* register window class */ wcex.cbSize = sizeof(WNDCLASSEX); wcex.style = CS_OWNDC; wcex.lpfnWndProc = WindowProc; wcex.cbClsExtra = 0; wcex.cbWndExtra = 0; wcex.hInstance = hInstance; wcex.hIcon = LoadIcon(NULL, IDI_APPLICATION); wcex.hCursor = LoadCursor(NULL, IDC_ARROW); wcex.hbrBackground = (HBRUSH)GetStockObject(BLACK_BRUSH); wcex.lpszMenuName = NULL; wcex.lpszClassName = "GLSample"; wcex.hIconSm = LoadIcon(NULL, IDI_APPLICATION);; if (!RegisterClassEx(&wcex)) return 0; /* create main window */ hwnd = CreateWindowEx(0, "GLSample", "OpenGL Sample", WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, 256, 256, NULL, NULL, hInstance, NULL); ShowWindow(hwnd, nCmdShow); /* enable OpenGL for the window */ EnableOpenGL(hwnd, &hDC, &hRC); /* program main loop */ while (!bQuit) { /* check for messages */ if (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE)) { /* handle or dispatch messages */ if (msg.message == WM_QUIT) { bQuit = TRUE; } else { TranslateMessage(&msg); DispatchMessage(&msg); } } else { /* OpenGL animation code goes here */ glClearColor(0.0f, 0.0f, 0.0f, 0.0f); glClear(GL_COLOR_BUFFER_BIT); glPushMatrix(); glRotatef(theta, 0.0f, 0.0f, 1.0f); glBegin(GL_TRIANGLES); glColor3f(1.0f, 0.0f, 0.0f); glVertex2f(0.0f, 1.0f); glColor3f(0.0f, 1.0f, 0.0f); glVertex2f(0.87f, -0.5f); glColor3f(0.0f, 0.0f, 1.0f); glVertex2f(-0.87f, -0.5f); glEnd(); glPopMatrix(); SwapBuffers(hDC); theta += 1.0f; Sleep (1); } } /* shutdown OpenGL */ DisableOpenGL(hwnd, hDC, hRC); /* destroy the window explicitly */ DestroyWindow(hwnd); return msg.wParam; } LRESULT CALLBACK WindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam) { switch (uMsg) { case WM_CLOSE: PostQuitMessage(0); break; case WM_DESTROY: return 0; case WM_KEYDOWN: { switch (wParam) { case VK_ESCAPE: PostQuitMessage(0); break; } } break; default: return DefWindowProc(hwnd, uMsg, wParam, lParam); } return 0; } void EnableOpenGL(HWND hwnd, HDC* hDC, HGLRC* hRC) { PIXELFORMATDESCRIPTOR pfd; int iFormat; /* get the device context (DC) */ *hDC = GetDC(hwnd); /* set the pixel format for the DC */ ZeroMemory(&pfd, sizeof(pfd)); pfd.nSize = sizeof(pfd); pfd.nVersion = 1; pfd.dwFlags = PFD_DRAW_TO_WINDOW | PFD_SUPPORT_OPENGL | PFD_DOUBLEBUFFER; pfd.iPixelType = PFD_TYPE_RGBA; pfd.cColorBits = 24; pfd.cDepthBits = 16; pfd.iLayerType = PFD_MAIN_PLANE; iFormat = ChoosePixelFormat(*hDC, &pfd); SetPixelFormat(*hDC, iFormat, &pfd); /* create and enable the render context (RC) */ *hRC = wglCreateContext(*hDC); wglMakeCurrent(*hDC, *hRC); } void DisableOpenGL (HWND hwnd, HDC hDC, HGLRC hRC) { wglMakeCurrent(NULL, NULL); wglDeleteContext(hRC); ReleaseDC(hwnd, hDC); }

  Read the article

< Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >