Search Results

Search found 20140 results on 806 pages for 'output formatting'.

Page 457/806 | < Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >

• Fix for poor hd playback for 11.04 upwards

  - by mark kirby

  Hi guys ive seen loads of posts on this site about poor 720/1080p playback in recent ubuntu versions I had this problem and fixed it so I thought id share it with everyone.... 1 install mplayer 2 install smplayer frontend {in software center} 3 open smplayer 4 go to "OPTIONS" then "PREFRENCES" then "GENRAL" 5 if you have a nvidia card choose "OUTPUT DRIVER" and select "VDPAU" {for ATI or AMD choose xv (0 - ATI Radeon AVIVO video) I dont know if this will work as my card is nvidia but it should) 6 go to performance on the left hand side and set both local and streaming cache to 99999 (this may also fix dvd playback if you set that cache aswell} 7 check the box for "ALLOW HARD FRAME DROP" and set "LOOP FILTER" to skip only on HD 8 Set the "THREDS FOR DECODING OPTION TO THE NUMBER OF CORES YOUR CPU HAS IF YOU HAVE MORE THAN ONE CPU ADD UP ALL THE CORES FOR BEST PERFORMANCE" 9 Enjoy you HD movies again on ubuntu...... I have a pretty avrage machine heres my spec.... 2x Pentium 4 ht 3 ghz Stock dell power and motherboard GFORCE 310 HDMI 24 inch full HD tv as a monitor so any one with dule core cpu should have no problems getting this to work. hope this helps someone out.

  Read the article

• Unable to install OpenLDAP in debian based elementary OS

  - by Waqas Khan

  Hi while installing openldap when i enter the command: apt-get install slapd I get the following output Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: slapd : Depends: libldap-2.4-2 (= 2.4.28-1.1ubuntu4.1) but 2.4.28-1.1ubuntu4.2 is to be installed E: Unable to correct problems, you have held broken packages. Please help.

  Read the article

• Memory is free, but still swapping?

  - by japancheese

  Hello, I'm sure this is a pretty basic question, but I'm just trying to get a grasp of what's going on with my Ubuntu (Hardy Herron) server (running a Rails-based site). It seems that I have free memory available, yet the system is reporting that it is still swapping memory (unless I'm reading this incorrectly?). Here is the "free -m" output total used free shared buffers cached Mem: 1024 905 118 0 33 409 -/+ buffers/cache: 462 561 Swap: 2047 95 1952 Could anyone explain to me some possible reasons that it is maintaining 95mb of swap at all times (it is never less)? I'm just looking for some leads on things I could check out that would explain to me exactly how memory is utilized in Linux.

  Read the article

• Cannot use scp on Mac OS X

  - by Robert

  Hi all, when I try to copy any file with scp on Mac OS X Snow Leopard from another machine I get this error: scp [email protected]:/home/me/file.zip . Password: ... ---> Couldn't open /dev/null: Permission denied this is the output of "ls -l /dev/null": crw-rw-rw- 1 root wheel 3, 2 May 14 14:10 /dev/null I am in the group wheel, and even if I do "sudo scp..." it doesn't work. It's driving me crazy, do you have any suggestion? Thanx!

  Read the article

• GSL Uniform Random Number Generator

  - by Jamaia

  I want to use GSL's uniform random number generator. On their website, they include this sample code: #include <stdio.h> #include <gsl/gsl_rng.h> int main (void) { const gsl_rng_type * T; gsl_rng * r; int i, n = 10; gsl_rng_env_setup(); T = gsl_rng_default; r = gsl_rng_alloc (T); for (i = 0; i < n; i++) { double u = gsl_rng_uniform (r); printf ("%.5f\n", u); } gsl_rng_free (r); return 0; } However, this does not rely on any seed and so, the same random numbers will be produced each time. They also specify the following: The generator itself can be changed using the environment variable GSL_RNG_TYPE. Here is the output of the program using a seed value of 123 and the multiple-recursive generator mrg, $ GSL_RNG_SEED=123 GSL_RNG_TYPE=mrg ./a.out But I don't understand how to implement this. Any ideas as to what modifications I can make to the above code to incorporate the seed?

  Read the article

• grub workaround for cannot find UUID in dual boot system fails and now grub won't boot anything

  - by keepitsimpleengineer

  New clean install of x86 11.10 desktop. Dual boot with windows XP and Linux on separate drives. After install grub will not boot Windows, but by changing boot drive boots fine. When I go to fix this I find from http://bootinfoscript.sourceforge.net/ and a link to http://sourceforge.net/apps/mediawiki/bootinfoscript/index.php?title=Boot_Problems:search my problem, the message on the grub boot error screen: error: no such device: 6??????? So I follow the Step2 and compare the output of: sudo blkid and sudo nano /boot/grub/grub.cfg The UUIDs in both match for the Windows drive, so I do the fix in Step 4 "remove the search lines for …" in /usr/lib/grub/grub-mkconfig_lib, commenting out the three lines as before? # if fs_uuid="`${grub_probe} --device ${device} --target=fs_uuid 2> /dev/null`" ; then # echo "search --no-floppy --fs-uuid --set ${fs_uuid}" # fi I run sudo update-grub and check /etc/default/grub.cfg and see that it now identifies the Windows partition not by UUID, which I suppose is the workaround. But now when I try to boot 11.10 Desktop, I get: error: no such partition… … and when I try to boot Windows, I get: error: invalid signature. So Now, how do I fix this… The boot problem and find a workaround that works?

  Read the article

• Ubuntu 12.10: Installing proprietary Nvidia driver causes freeze at boot

  - by Greg

  Ok, so I just installed Ubuntu on my laptop, and I immediately encountered an issue: the HDMI audio output won't work. Yes, I know about the sound settings thing where you have to select the HDMI option, but even when it's selected I get no sound out of the TV I'm hooking it up to. This is a dealbreaker for me, because my laptop speakers are terrible, it's one of the big reasons I use my TV monitor. So I decided to work on solving the problem by upgrading my Nvidia drivers. I switched to one of the propriety drivers offered in that software updating utility that comes with the OS, the one option that said (tested). Viola, sound over the HDMI is now working. Unfortunately, this now brings me to my next problem: when I reboot Ubuntu with this or any other proprietary driver installed, it freezes when it tries to load my desktop. As in I can see my wallpaper, but no icons or options of any kind. The system is totally frozen, and gives me one of those "we've experienced an error, do you want to report it messages." So there's my bind. I need HDMI audio out, that's a total dealbreaker for me, but installing the drivers that give me that capability crash the system. Does anyone have any idea what's causing this

  Read the article

• Dynamic libraries are not allowed on iOS but what about this?

  - by tapirath

  I'm currently using LuaJIT and its FFI interface to call C functions from LUA scripts. What FFI does is to look at dynamic libraries' exported symbols and let the developer use it directly form LUA. Kind of like Python ctypes. Obviously using dynamic libraries is not permitted in iOS for security reasons. So in order to come up with a solution I found the following snippet. /* (c) 2012 +++ Filip Stoklas, aka FipS, http://www.4FipS.com +++ THIS CODE IS FREE - LICENSED UNDER THE MIT LICENSE ARTICLE URL: http://forums.4fips.com/viewtopic.php?f=3&t=589 */ extern "C" { #include <lua.h> #include <lualib.h> #include <lauxlib.h> } // extern "C" #include <cassert> // Please note that despite the fact that we build this code as a regular // executable (exe), we still use __declspec(dllexport) to export // symbols. Without doing that FFI wouldn't be able to locate them! extern "C" __declspec(dllexport) void __cdecl hello_from_lua(const char *msg) { printf("A message from LUA: %s\n", msg); } const char *lua_code = "local ffi = require('ffi') \n" "ffi.cdef[[ \n" "const char * hello_from_lua(const char *); \n" // matches the C prototype "]] \n" "ffi.C.hello_from_lua('Hello from LUA!') \n" // do actual C call ; int main() { lua_State *lua = luaL_newstate(); assert(lua); luaL_openlibs(lua); const int status = luaL_dostring(lua, lua_code); if(status) printf("Couldn't execute LUA code: %s\n", lua_tostring(lua, -1)); lua_close(lua); return 0; } // output: // A message from LUA: Hello from LUA! Basically, instead of using a dynamic library, the symbols are exported directly inside the executable file. The question is: is this permitted by Apple? Thanks.

  Read the article

• Ubuntu 12.04 VPS doesn't boot with mysql in nsswitch.conf

  - by chrisv

  1and1 VPS ("dynamic cloud server") does not boot any more as soon as mysql lookup is enabled in nsswitch.conf - any suggestions appreciated. Minimal setup to reproduce the problem: install Ubuntu 12.04 / LTS minimal server image install mysql-server, libnss-mysql-bg, nscd configure /etc/libnss-mysql.cfg and /etc/libnss-mysql-root.cfg set up appropriate database tables configure nss lookups through mysql in nsswitch.conf passwd: compat mysql group: compat mysql shadow: compat mysql Now, when I try to reboot the server it just hangs. No logs (maybe due to /var not yet being mounted), and I can't see console output (since this is a VPS). Booting into recovery image and removing "mysql" from /etc/nsswitch.conf makes the system bootable again, so this is definitely related to nsswitch/libnss-mysql-bg. There's a thread on gentoo-users which seems to describe a similar problem, unfortunately there's no real solution described, also the thread is rather old (from 2006) so I'm not sure whether this applies to me at all.

  Read the article

• Static when metal USB plug touches my case, and other electrical problems.

  - by Archagon

  I have an aluminum PC case. Whenever the metal USB plug from my external drive contacts the front, I get crackling from my speakers, which are connected to an external USB soundcard. (This crackling happens even if they're not connected to the actual output jack.) A few possibly related problems: my audio occasionally starts popping once every few minutes, and my USB devices sometimes play the "connected" sound in Windows even though they're already connected, as if they're briefly disconnecting. My guess is that this has to do with the grounding, but I'm not sure exactly what to do. My case has a round grounding wire, but I don't know where to attach it, and fiddling with it didn't seem to have any effect. Suggestions?

  Read the article

• Getting Unity 3D working on legacy Nvidia card

  - by user69545

  I installed the latest nVIDIA drivers for my FX5500 card. I understand that the X server version does not officially support this driver or card but was wondering what I can do to get compiz running. I have researched for hours on this issue but cannot come up with an answer for myself. I might be doing all this for nothing but I wanted to at least try. Here is the output of my test: mike@mike-linux-box:~$ /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce FX 5500/AGP/SSE2 OpenGL version string: 2.1.2 NVIDIA 173.14.35 Not software rendered: yes Not blacklisted: no GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no So I was wondering what is the "Not Blacklisted" test? Is this the Nouveau Blacklisting? nVIDIA driver did that automatically. Does this need to be removed? Any help would be appreciated. I just want to run compiz effects. Thanks.

  Read the article

• Difficulty Mounting Volumes on a Partitioned External HD

  - by Todd

  I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

  Read the article

• Cannot get temperatures in Dell Studio 1558

  - by Athul Iddya

  I could never get proper temperatures on my Dell Studio 1558. lm-sensors and acpi give wrong readings. The output of sensors is, $ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) acpi -V gives me, $ acpi -V Battery 0: Full, 100% Battery 0: design capacity 414 mAh, last full capacity 369 mAh = 89% Adapter 0: on-line Thermal 0: ok, 0.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 0: trip point 1 switches to mode passive at temperature 95.0 degrees C Thermal 0: trip point 2 switches to mode active at temperature 71.0 degrees C Thermal 0: trip point 3 switches to mode active at temperature 55.0 degrees C Thermal 1: ok, 26.8 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: trip point 1 switches to mode active at temperature 71.0 degrees C Thermal 1: trip point 2 switches to mode active at temperature 55.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 Cooling 3: Processor 0 of 10 Cooling 4: Processor 0 of 10 Cooling 5: Fan 0 of 1 Cooling 6: Fan 0 of 1 I suspect even hddtemp gives bogus readings as its always at 46 $ sudo hddtemp /dev/sda /dev/sda: ST9500420AS: 46°C I have gone through some bug reports and some used to have the same problem after resuming from suspend. But I always have this problem. I had updated to the latest BIOS from Windows a couple of weeks ago, will updating from Ubuntu change anything? CORRECTION: hddtemp's readings do change. Its now at 45.

  Read the article

• What do encrypted files' data look like?

  - by Frost Shadow

  I know there are a lot of encryption programs available, that I would guess use different methods for encryption, and thus have different types of output files (.fve .tc .cha .dmg (bitlocker, truecrypt, challenger, ect.)), but if someone didn't know what the file was and just looked at the data, what would it look like? Does it just look like random bits, or can you still pick out a pattern? If it does look random, how is it if I moved the encrypted file to another computer, the other computer can tell it's a file, and is able to decrypt it (how would it even know where to start or stop, if it all looked random)? Also, how is the structure affected by encrypting files twice, using the same method, or a different one? Thanks for any help, and if you know any books or site about encryption for complete idiots, I'd appreciate it!

  Read the article

• Plesk 9.2.1 reporting much more SMTP traffic than the logs indicate

  - by Eric3

  Plesk is reporting nearly 7GB of SMTP traffic so far this month on one domain, most of it outgoing. However, after running qmail's mail logs (which only go back to May 8) through Sawmill, only about 900MB of traffic on that domain is accounted for. What I know so far: Email sent via PHP's mail() function is sent through sendmail, which has been logging its output via syslog to the same logs that qmail uses, at /usr/local/psa/var/log/ Messages sent by logging in directly via Telnet are logged as well I verified that Plesk is reporting totals correctly by creating a new domain, sending some large emails through it, running Plesk's statistics calculation script, and comparing its reported totals to the actual size of the emails sent The problem domain did have three mail accounts with blank or insecure passwords, which I corrected Does anyone know how Plesk calculates SMTP traffic statistics? Are there some log files elsewhere that I'm missing? What kind of SMTP traffic would Plesk know about that isn't being logged?

  Read the article

• Acceptable placement of the composition root using dependency injection and inversion of control containers

  - by Lumirris

  I've read in several sources including Mark Seemann's 'Ploeh' blog about how the appropriate placement of the composition root of an IoC container is as close as possible to the entry point of an application. In the .NET world, these applications seem to be commonly thought of as Web projects, WPF projects, console applications, things with a typical UI (read: not library projects). Is it really going against this sage advice to place the composition root at the entry point of a library project, when it represents the logical entry point of a group of library projects, and the client of a project group such as this is someone else's work, whose author can't or won't add the composition root to their project (a UI project or yet another library project, even)? I'm familiar with Ninject as an IoC container implementation, but I imagine many others work the same way in that they can scan for a module containing all the necessary binding configurations. This means I could put a binding module in its own library project to compile with my main library project's output, and if the client wanted to change the configuration (an unlikely scenario in my case), they could drop in a replacement dll to replace the library with the binding module. This seems to avoid the most common clients having to deal with dependency injection and composition roots at all, and would make for the cleanest API for the library project group. Yet this seems to fly in the face of conventional wisdom on the issue. Is it just that most of the advice out there makes the assumption that the developer has some coordination with the development of the UI project(s) as well, rather than my case, in which I'm just developing libraries for others to use?

  Read the article

• merging video and audio with custom panning

  - by cherouvim

  I have: a video which has mono audio inside a audio (mono) I'd like to merge those two to a single video file containing: video from #1 audio from #1 full left pan + audio #2 full right pan Is this possible in ffmpeg using 1 command? I've tried the following which almost does this but the video/audio gets out of sync: ffmpeg -i video.mp4 -filter_complex "amovie=audio.wav [r] ; [r] amerge" output.mp4 -y I've managed to do it with multiple commands: #1 create right panned audio ffmpeg -i audio.wav -ac 2 -vbr 5 audio-stereo.mp3 -y ffmpeg -i audio-stereo.mp3 -af pan=stereo:c1=c1 audio-right.mp3 -y #2 create left panned video ffmpeg -i video.mp4 -af pan=stereo:c0=c0 video-left.mp4 -y #3 merge the two ffmpeg -i video-left.mp4 -i audio-right.mp3 -filter_complex "amix=inputs=2" video-mixed.mp4 -y It does the job, but is it possible with 1 command?

  Read the article

• How to create multiple OS on same DVD [duplicate]

  - by learner

  This question already has an answer here: How to make a multiboot CD that will start a user-chosen ISO file 7 answers I searched this forum but there are only general answers which doesn't give me desired output. Here is what I want to do. I have (1). Windows 7 ISO (2). Windows 8.1 previews ISO and (3). Ubuntu 12.10 ISO files. Using which I want to create single bootable DVD, so that after creating DVD it should ask to choose to install between 3 OS. Is it possible? If so please help me.

  Read the article

• Webcam doesn't work in Ubuntu 12.10

  - by Kzhi

  I have Gembird cam68ut. On my Ubuntu 12.10 it shows black screen in cheese and guvcview. I tested it in win7, it works fine. Here what I found: It is a uvc compliant camera, I checked on the site: 18ec:3299 USB 2.0 PC Camera (model number QC3231) ArkMicro This webcam is report by lsusb: Bus 001 Device 004: ID 18ec:3299 Arkmicro Technologies Inc. Here is the output of dmesg | tail: uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3299) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input17 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) When I run cheese (or guvcview), here what I get in terminal: libv4l2: error turning on stream: No space left on device (cheese:11797): cheese-WARNING **: Internal data flow error. I tried it on different usb slots with the same results The Webcam's microphone works, I can record audio with it Guys, any thoughts on what can be done to make it work?

  Read the article

• Changing the RSS and Dynamic Views layout when using Blogger as a Podcast index

  - by Stuart

  I'm trying to set up a podcast service at present. This is just a 'spare time' task - so I wanted a quick, easy way to do it. To get this working: I've ripped (with owner permission) some YouTube content across to MP3 and hosted this content on Azure Blob Storage. I've posted blog posts - with linked mp3 content - inside a Blogger website. I've registered the RSS feed with iTunes This all seems to be working OK - http://dotnetmobilepodcast.blogspot.co.uk/ However, when it comes to a couple of final touches, then I'm hitting problems. RSS I would like to add iTunes metadata to the RSS feed. However, I can't find any way to do this inside the Blogger system. To workaround this I've tried using FeedBurner with its StreamCast plugin. However, the output from FeedBurner doesn't seem to be accepted by iTunes - e.g. http://feeds.feedburner.com/MobileAppCSharpPodcasts leads to this very unhelpful 11111 message: Is there any other way I can get this iTunes metadata content into the Blogger RSS feed - e.g. maybe an alternative service or a Yahoo! Pipe? Showing the MP3 files in the Blog I'm trying to work out how to automatically display the linked enclosures inside the blog posts - do the blogger Dynamic Views don't seem to have any way of doing this? I've found the HTML in those views very difficult to follow. If necessary I can workaround this using manual entries into each blog post... but I'd prefer to do this programatically if I can.

  Read the article

• System speakers not recognized

  - by Kyle Maxwell

  Since upgrading to Xubuntu 13.10, sound has not functioned properly (e.g. screeching when playing Skype notifications). Now, however, it does not function at all. pavucontrol only shows Dummy Output and does not recognize the built-in speakers on my Dell Precision M4600. Possibly related, the sound indicator applet does not come up when I click on it, only showing a small white bar underneath it. I have purged and reinstalled pulseaudio. lspci -v shows: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: Dell Precision M4600 Flags: bus master, fast devsel, latency 0, IRQ 56 Memory at f2560000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 14a3 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0080000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel The "Capabilities: <access denied" line makes me wonder if there's a permissions issue, as the Log Out applet now shows "Restart" and "Shutdown" grayed out. groups shows me in: kmaxwell adm dialout cdrom sudo dip plugdev fuse lpadmin netdev sambashare vboxusers

  Read the article

• xrander detect only one display

  - by cupakob

  Hi all, i have a problem, to get a picture on my tv over VGA (and also over S-Video to SCART). I've tried it first over xorg, but without success. After that i tried xrand, but xrander detect only my laptop display, here the output bufka [~] $ xrandr -q Screen 0: minimum 1680 x 1050, current 1680 x 1050, maximum 1680 x 1050 default connected 1680x1050+0+0 0mm x 0mm 1680x1050 50.0* 51.0 52.0 Any suggestions, how to solve the problem? My video card is Nvidia Geforce 8600M GT, TV is LG M227WPD and OS Ubuntu Lucid...

  Read the article

• adding remote ssh printer as local printer

  - by guest

  I have SSH access to a remote host (FreeBSD) that has a printer set up. I do not have root access on that host or any other special user rights. Now I want to print directly from my laptop on that printer (Ubuntu 10.10). The problem is that I don't know how to "import" or whatever the the printer, as it needs authetification from my user account (print quota limitations). E-mailing me the files I want to print or scp them every time is a pain, ATM I pipe the PostScript output manually to a ssh command, but that's also a huge working overhead. E.g. when I want to print a foo.pdf pdftops '/path/to/foo.pdf' - | ssh user@remotehost 'lpr -P printername' So, does anyone know of a smooth way to shorten this procedure? Ideally I would just want to use a printername instead of the whole ssh command

  Read the article

• Shutdown issue on persistent LiveUSB

  - by John K

  A) Downloaded Ubuntu to a Windows 7 temp directory from: http://www.ubuntu.com/download/ubuntu/download (Ubuntu 11.10 - Latest version / 32-bit). The output was a .iso file. B) Created a bootable USB stick using Universal USB Installer: http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/. Did not select "Persistent file". Result: Tried it in a Dell Latitude D630 Dell laptop: works every time, many startups and shutdowns. C) Repeated B) but with "Persistent file" set. Works once or twice, but then, just locks on the Ubuntu splash screen. E) Downloaded LiveUSB Install from http://live.learnfree.eu/download, which created a file on Windows 7 called live-usb-install-2.3.2.exe. F) Ran the above installer with "Persistent file" to a 4GB ScanDisk (formatted) thumb drive. Result: Worked pretty good for a while. Shutdown and rebooted several times. Changed items like creating a new directories - all worked. Then: Setup an Admin account with a password and no auto login. On next reboot, it required the password and logged in correctly. Tried to shutdown via the top left icon - Shutdown menu option. Key issue: Would not shutdown, but would always go back to the login prompt. Could successfully login. Finally, shutdown (which just put me back to the login window), and hard shutdown with the power switch. Result: On reboot, just locks on the Ubuntu splash screen. Questions (note, very new to Linux): Did I shutdown wrong (I mean prior to the hard power off)? Is the persistence option very unstable, or am I doing something else completely wrong?

  Read the article

• Where is php executable on Ubuntu?

  - by user601L

  I have installed apache and php. I know php works as I have tested a simple php file on apache server. I'm writing a simple webserver which should be able to process php files. So what I want to do is once I get a request for a php file, something like 'exec php test.php' and get the output and pass it to the client. As I'm not much into Ubuntu, I don't know where is the php executable (should be in \bin right?) to do it. But there is no php file inside \bin or \usr\bin. When I run 'which php' it shows nothing. How do I do this?

  Read the article

< Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >