Search Results

Search found 14745 results on 590 pages for 'setting'.

Page 459/590 | < Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >

• Using a degrading corrupted hard disk with a brand new one. Is this ok?

  - by EApubs

  My old 500 GB hard drive started to give bad sectors. Its slowly going down. So, I bought a new 1TB Seagate drive. I first attached the 500GB drive as the first primary drive and installed Windows. I want Windows boot loader to be placed in the old drive so it won't conflict with the Linux system. But the actual Windows system (Including the C drive) is placed on my new hard drive. After this, I attached the new drive as the primary and installed Linux. Now if I want to re install windows, I can do it without any issues by simply setting the old drive as the primary. So the Linux system will be untouched. But is it a good idea to set things like this? Will the old degrading drive have an impact on the new one? The old drive is slower than the new one. Won't I be able to get the maximum speed out of the new drive even when its used to install everything (including the OS)? PS : When I ran the Windows Experience Index, I was using the old drive as the primary. Did it got the hard drive ratings from the old drive? What if I run it now with the new drive as the primary?

  Read the article

• IIS_IUSRS cannot access files uploaded and created by Network Service - error 401.3

  - by Max

  Let me rephrase my question as I investigated further: The problem: I have a php script that is used to upload images on my windows webserver 2008. The files are created in the correct directory. The are created and owned by the user Network Service. Network Service has full access to the uploaded file. As soon as I try to access the uploaded file (mostly an image) via HTTP, I get an 401.3 not authorized error. Now, if I right-click on the not accessible image and grant IIS_IUSRS group read permissions via the security tab, the image can be accessed! By default IIS_IUSRS has NO access at all for the uploaded file. The directory containing the image files has the correct access rights set. But each file that is new uploaded to the directory is permitted for IIS_IUSRS. The question: How can I grant IIS_IUSRS by default access to the newly uploaded file? The appPool of the website has its identity set to its default, I also tried setting it to "networkIdentity" or so, but that did not work either.

  Read the article

• SSH with public/private key to iMac fails.

  - by bennedich

  I'm trying to connect to my iMac (server) from my macbook (client) on my LAN. Both have Mac OS X 10.6.4. Server running on a new clean install of the OS. When just activating Remote Login in System Preferences everything works fine. But when setting up ssh to only work with public/private key I get the following error messages from the server log depending on if I use a rsa passphrase or not: With passphrase (case 1): PAM: user account has expired for <myServerUserName> from 192.168.X.X via 192.168.X.Y Without passphrase (case 2): Failed publickey for <myServerUserName> from 192.168.X.X port AAAAA ssh2 This is my setup algorithm: Create a private and public key on client with command ssh-keygen -t rsa. In case 1 I also set a passphrase. Move the id_rsa.pub to the server path /Users/<myServerUserName>/.ssh/ In this folder I execute cat id_rsa.pub > authorized_keys Making sure Remote Login isn't active, I now execute sudo /usr/sbin/sshd -d on the server. Back on the client I now type ssh -v -v -v <myServerUserName>@192.168.X.Y and get prompted to accept RSA key fingerprint. This is NOT the same fingerprint as the one from when I created the private/public key (should it be?). I accept. Depending on case: CASE 1: Client gets halted for password and the response is permission denied even though correct password is given. Back on the server I can read the error message I stated above for case 1: PAM: user account has expired... CASE 2: Client gets message Connection closed by 192.168.X.Y. Back on the server I can read the error message I stated above for case 2: Failed publickey... What could possibly cause this?

  Read the article

• When using software RAID and LVM on Linux, which IO scheduler and readahead settings are honored?

  - by andrew311

  In the case of multiple layers (physical drives - md - dm - lvm), how do the schedulers, readahead settings, and other disk settings interact? Imagine you have several disks (/dev/sda - /dev/sdd) all part of a software RAID device (/dev/md0) created with mdadm. Each device (including physical disks and /dev/md0) has its own setting for IO scheduler (changed like so) and readahead (changed using blockdev). When you throw in things like dm (crypto) and LVM you add even more layers with their own settings. For example, if the physical device has a read ahead of 128 blocks and the RAID has a readahead of 64 blocks, which is honored when I do a read from /dev/md0? Does the md driver attempt a 64 block read which the physical device driver then translates to a read of 128 blocks? Or does the RAID readahead "pass-through" to the underlying device, resulting in a 64 block read? The same kind of question holds for schedulers? Do I have to worry about multiple layers of IO schedulers and how they interact, or does the /dev/md0 effectively override underlying schedulers? In my attempts to answer this question, I've dug up some interesting data on schedulers and tools which might help figure this out: Linux Disk Scheduler Benchmarking from Google blktrace - generate traces of the i/o traffic on block devices Relevant Linux kernel mailing list thread

  Read the article

• Should I be able to Windows Phone 8 emulator running with this AMD config

  - by pete

  I have just bought a new system as follows * AMD A4-5300 Trinity 3.4GHz * Gigabyte GA-F2A55M-DS2 Motherboard I checked and the A4-5300 supports Virtualisation. I have run the SLAT checking tool and it says that my machine supports SLAT. Been into the BIOS and ensures that SVN is enabled. I have also run the coreinfo tool that indicates that SVN is not valid fort the machine nor is NPT.. not sure why this conflicts with the true BIOS setting (I checked with GIGABYTE and seems that NPT and NX are not options that can be set in the BIOS) But.. when I run the emulator I it hangs - I can see some activity in Hyper-V manager, but it doesnt get very far and no meaningfull error messages. Been working the plethora of suggestions to get around this, but so far, nothing has worked. My question is should this setup allow the WP8 emulator to run. I am positive the CPU supports virtualisation, but are there issues with the motherboard here? I have spent a huge amount of time on this so far....am I wasting my time with the current configuration, or should it work? thanks

  Read the article

• FDE / SSD - partition and leave some unencrypted?

  - by Web Design Hero

  Just bought a used beast of a desktop pc. The system drive is setup as a Raid 0 SSD (Intel 510 SSD Drives) with 128 each. I will probably not have to many programs beyond office and maybe Adobe CS if I spring for it, I will be keeping big data on a regular hdd. My question is about setting up TrueCrypt with my configuration. I have not previously done full disk encryption, but I feel that its probably a good idea. I have done some speed tests using file containers on the hdd and the sdd with truecrypt. While there is a huge hit with the SSDs and Truecrypt, it still outperforms the hdd on its own by a good margin, so I think i will be okay for my needs with truecrypt. I have seen in a few places that they recommend partitioning the drive and leavign some of the SSD not inside truecrypt, does this really make a difference? If so, how much should I leave? Will there be any issue in the Raid0 configuration? I am not really concerned about all the wear leveling issue, rather loose data and be secure, but since I don't need all that space neccesarily, I would like to optimize my setup for security and speed.

  Read the article

• How do I setup an Alias on Apache with XAMPP on Linux ? (Permission problem)

  - by knarf

  XAMPP works fine but I want to have http://localhost/f to point to /home/knarf/prog/php/fwyxz. I've chmod -R 777 /home/knarf/prog/php/fwyxz I've added Alias /f /home/knarf/prog/php/fwyxz at the end of the httpd.conf And when I try to access it, I get a 403. From the apache error_log: [error] [client 127.0.0.1] (13)Permission denied: access to /f denied. I've already tried several solutions (userdir and symlinks) but they both failed with the same error. I've also tried to add this after the Alias: <Directory "/home/knarf/prog/php/fwyxz"> Order allow,deny Allow from all </Directory> But again, permission denied. Now if I change the User/Group under which apache runs from nobody to knarf, it seems to work (static files are ok) but PHP can't use/initialize sessions : [error] [client 127.0.0.1] PHP Warning: session_start() [function.session-start]: open(/tmp/sess_r5nrmu4ugqguqqe83rs53lq6k0, O_RDWR) failed: Permission denied (13) in /home/knarf/prog/php/fwyxz/index.php on line 3 [error] [client 127.0.0.1] PHP Warning: Unknown: open(/tmp/sess_r5nrmu4ugqguqqe83rs53lq6k0, O_RDWR) failed: Permission denied (13) in Unknown on line 0 [error] [client 127.0.0.1] PHP Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct () in Unknown on line 0 This is really frustrating.

  Read the article

• Exchange 2007 issue internet receive connector

  - by user223779

  I have issue with yahoo.co.uk if I send a mail from within the yahoo webconsole the mail arrives in my inbox on the exchange server If I send mail from Iphone configure to send via mail box configure with yahoo setting mail is dropped. It is not the phone I can send perfectly fine to other exchange 2007 servers same service pack etc. if you look at the smtprec log below. this message sent from the phone you can see stops after 354 Start mail input; end with . ,<,EHLO nm26-vm7.bullet.mail.ir2.yahoo.com, ,,250-mail.marcocm.com Hello [212.82.97.49], ,,250-SIZE 10485760, ,,250-PIPELINING, ,,250-DSN, ,,250-ENHANCEDSTATUSCODES, ,,250-AUTH, ,,250-8BITMIME, ,,250-BINARYMIME, ,,250 CHUNKING, ,<,MAIL FROM:, ,*,08D13F3CADECA060;2014-06-04T11:26:50.898Z;1,receiving message ,,250 2.1.0 Sender OK, ,<,RCPT TO:, ,,250 2.1.5 Recipient OK, ,<,DATA, ,,354 Start mail input; end with ., ,+,, This is the message hitting the same server sent from yahoo webmail. ,"220 mail.marcocm.com Microsoft ESMTP MAIL Service ready at Wed, 4 Jun 2014 12:29:26 +0100", ,<,EHLO nm4-vm6.bullet.mail.ir2.yahoo.com, ,,250-mail.xxx.com Hello [212.82.96.104], ,,250-SIZE 10485760, ,,250-PIPELINING, ,,250-DSN, ,,250-ENHANCEDSTATUSCODES, ,,250-AUTH, ,,250-8BITMIME, ,,250-BINARYMIME, ,,250 CHUNKING, ,<,MAIL FROM:, ,*,08D13F3CADECA06B;2014-06-04T11:29:26.237Z;1,receiving message ,,250 2.1.0 Sender OK, ,<,RCPT TO:, ,,250 2.1.5 Recipient OK, ,<,DATA, ,,354 Start mail input; end with ., 2,,250 2.6.0 <[email protected] Queued mail for delivery, <,QUIT, ,,221 2.0.0 Service closing transmission channel, ,-,,Local ,+,, Any Thoughts how to fix this issue much appreciated.

  Read the article

• Issues with returned mail sent to web-based email domains

  - by Beeder

  My company is having issues with returned mail that we send out to external domains. A few weeks ago we replaced a firewall and changed ISP providers and began subsequently having issues RECEIVING emails from external sources because we hadn't updated our new IPs in the DNS records. After making the necessary configuration changes and setting up SMTP forwarding over port 25 to our mail server, everything was working fine up until a few days ago when we started having mail sent out returned to us. We aren't having any trouble communicating internally (to recipients on our domain) but it seems we're having trouble with outbound messages to web-based email recipients. (@hotmail, @live, @yahoo, @gmail...etc) Currently we are running Server 2003 SP2 and exchange 2003. I'm very unfamiliar with configuring Exchange and could really use some help in narrowing down the possibilities. I did some research and am becoming suspicious of Sender ID being the culprit due to our recent IP address change and the likelihood that Sender ID is identifying us as a fake domain. Am I going in entirely the wrong direction? Any input or guidance would be infinitely appreciated. This is the message that is returned when an outbound message fails...this particular one was sent to my @live.com account for testing purposes... Your message did not reach some or all of the intended recipients. The following recipient(s) could not be reached: [email protected] on 5/17/2012 3:02 PM There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. Unfortunately, messages from xx.x.xx.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. I tried a reverse DNS lookup and found that we are set up as a Forward-confirmed reverse DNS. So do I just need to contact my ISP and have them correct their DNS records or is this something I can solve on our end??

  Read the article

• phpMyadmin issue on cpanel

  - by user1149244

  I logged in into our cpanel to view phpMyAdmin but I can't open it. It give me this error message: Warning: session_write_close() [function.session-write-close]: write failed: No space left on device (28) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: session_write_close() [function.session-write-close]: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/cpanel/userhomes/cpanelphpmyadmin/sessions) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php:42) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 99 I contacted the support to assist me with. They just told me that the server is unmanaged. They told me to delete the free the partition but I don't know how to do it. I'm noob on that matter. The /var/log/btmp is over 8GB as they said. I want to delete that file. How would I do this? I need to free the space of the partition. I need some steps on how to do it and also steps on how to delete the /var/log/btmp. I have been googling around but I haven't found anything.

  Read the article

• FTP Scripting Capabilities

  - by lmg

  I am looking for an FTP client that will allow me to do the following Include a GUI for setting up a number of FTP connections Support FTPS Run unattended on Windows Server 2008 Retry failed transactions Support email Support custom scripts I need to pull files from a few different servers and there are certain calculations that need to be done depending on which server the files come from. I've looked at SmartFTP and it looks like pretty much what I need except I can't get it to run as a Windows Scheduled Task (I currently have some support threads open in their forum). I've also looked at a few other FTP clients (Filezilla, RoboFTP, and AutoFTP (you can find the Windows 7 BSOD in this one!)) that haven't had the capabilities I'm looking for. Right now, I'm looking at WS_FTP and its scripting capabilities. It appears I can create a script to run as a scheduled task, but I can't add the script to a file transfer task. Does anyone have suggestions on how I can do post-transfer processing on the files or better yet how to integrate scripting into the file transfer task? I'm also open to other suggestions for FTP clients as well if you have them! If I can't find a suitable FTP client, custom scripting will just have to do the trick.

  Read the article

• Windows XP VM on VMWare ESXi 4.1 "pausing" / blocked occasionally

  - by FelixD

  We have an issue with Windows XP SP3 VMs on VMWare ESXi 4.1.0 (the free version): They sometimes seem to "pause" for several minutes. This happens rarely (maybe once a month per VM, at least noticed only that often), but still is an issue for us. It happens for three different but similar VMs on three pretty different hosts (different hardware). I have the feeling that the "pausing" is not actually the CPU blocking, but probably the harddisks, but not 100% sure. The servers have one IDE disk (C:) and one SCSI (D:) and it might be either of the two. I have seen scheduled tasks simply not starting for up to 9 minutes and then running normally again with normal speed. They were totally blocked. This is not a load issue, the VMWare hosts have average load and the VMs in question already have reserved CPU resources plus high priorities for CPU and disk. The Windows boxes run mainly MySQL, Tomcat, FileZilla server, Cygwin stuff, Java + R applications, VMWare client, Elusiva Terminal Server pro, Nagios client. Not sure if this might be related with any of that software (e.g. Elusiva). Trying to debug this, there was nothing visible in Windows Event log, other logs in C:\Windows, VMWare events etc. Unfortunately the vmware.log file ends with "Log throttled". We found that we ran into 2 VMWare bugs there: The VMWare client writes lots on bogus messages in the vmware.log, which we now disabled (log level error setting) plus the bug that VMWare does not unthrottle the log (at least so far despite VM reboots). I know there is not much guidance and that may also be the reason why I so far didn't find anything related on the web or on ServerFault, but maybe some of this rings a bell with someone? Or please direct me to what more info to post. I hope that the vmware.logs get unthrottled eventually (can't easily restart the hosts at the moment). Thanks for any input!

  Read the article

• Tunnell network requests with Windows 7

  - by mark

  I've Windows 7 64bit Pro client in a private LAN behind a Netgear wgr614v7 router. I've also a remote Debian server machine outside. I'd like to tunnel all (or specified ports/protocols) over this outside server, so when I'm on the Windows machine and I request serverfault.com it would not appear from the wgr614v7 public IP but from the server. But it's not only about HTTP traffic, it's basically about everything I'd like to: other TCP ports, even UDP, etc. It must be transparent to the application, e.g. they shouldn't be aware of this. All their requests just appear as being from the server and the tunnel between them takes care about the packets. I'm aware of e.g. Putty and forwarding individual ports or using it as a socks proxy, however not many applications to support this and the support in windows itself looks non-existent to me. I might add it should be something "reasonable" easy to set up. I've heard about PPTP but I'm unsure about it's security implications (by design). Should I go for VPN? There seem to be two common solutions for Linux (OpenSwan and StrongSwan), why would I pick the one over the other? I also fear that setting up a VPN might be quite complex, OTOH maybe it's the only sane way to do the things right? Or is OpenVPN sufficient? I'm seeking for open (source) solutions, what other options to I have or which direction should I head to?

  Read the article

• RDP with multiple monitors, display preferences get reset?

  - by Martijn Kooij

  Problem: When I connect to my pc at the office via RDP all the application windows I had previously carefully placed on either monitor 1 or 2 will be "scrambled". Either all applications show on monitor 1 and monitor 2 is empty, or they have switched 1 <- 2. Expected behaviour: When I connect I see all the application windows on exactly the same position and in the exact same size as I left them the night before. I have the exact same monitors at home as I have at work: Primary 2560x1440, Secondary 900x1440. Yesterday I tried switching the physical cables on the host machine hoping that the hardware order of the monitors was the difference. But this morning my secondary monitor was completely blank, not even the taskbar (which I had set to ONLY show on the secondary). Somewhere there must be something to help Windows understand which physical monitor is which virtual RDP monitor is which RDP "server" monitor... Are there more options than switching the cables? This one has been bothering me for a long long time now, I hope someone has a solution or workaround for me. Edit I want to use both monitors, so I have checked the "Use all monitors" setting in the RDP client. For example I leave my mail and total commander on the right monitor, and visual studio and Firefox on the left monitor. When I connect to RDP I want to see those applications on the same positions and sizes.

  Read the article

• How to stop split tunnelling over cisco VPN (OS X)?

  - by Notre

  I'm using OS X (Snow Leopard) and the built in Cisco IP Sec client to connect to my corporate VPN. Currently, everything works as designed, and desired for most people. However, I would like to be able to funnel all traffic (particularly all web browser traffic) through the VPN. (Note - I'm an end user here, not the network administrator). Is this possible? In searching around, most people are looking to do the opposite; break out the VPN and enable split tunnelling of data. I'd like to avoid the split tunnelling. Is there some setting I can make in my OS X client to make this happen? I ran across a post where routing table changes are made to force split tunnelling: how to force split tunnel routing on mac -> cisco vpn I'm thinking something similar to that might work, but I'm not a networking expert so I'm not sure where to start (or if it is even possible). Thank you! Notre

  Read the article

• solution for an offline server

  - by dashmug

  I'm trying to setup a development server at work that will ideally be able to test drive a couple of projects in PHP, Rails, or Django (not always running at the same time). I develop the apps locally on a Mac and then I'll put the projects up on this server for testing with my actual users (non-techies) before deploying to a production server. My problem is that we have a very poor internet connection (almost negligible) at work and doing the usual apt-get/yum/ports (make, clean, install) processes for setting up servers always get their packages from online repositories somewhere. I know I could probably download the source and then compile them myself but that's going to be too much of a hassle for me. I'm thinking about two solutions: Plan A: Run a server VM on my Mac and then use this VM as the source repository for the offline server. I've read about Ubuntu's apt-proxy and it seems to be good enough though I haven't tried it yet. I'm not sure if this is possible but can I simply do apt-get install nginx --downloadonly so that the package and its dependencies will be downloaded into my VM and my server can use the VM as the source repo for apt-get? Plan B: Run a server VM on my Mac (which I can setup/update easily when I'm home) and then clone the VM to the offline development server. Maybe I should simply make the server a VM host so I can simply copy the VM over. I think this is okay for the first-time setup but subsequent updates will take too long (cloning the VM image). If I was working on Windows, I imagine it'd be easier because most services have an installer file that I can download and then run at the server. If you could suggest another way, it would be much appreciated. Update: From Michael Hampton's answer, I found a possible solution which is apt-cacher. I also found this page on Ubuntu's website. I wonder if there is a better tool than this one.

  Read the article

• How to keep multiple servers in sync file wise?

  - by GForceSys

  I'm currently managing a cluster of PHP-FPM servers, all of which tend to get out of sync with each other. The application that I'm using on top of the app servers (Magento) allows for admins to modify various files on the system, but now that the site is in a clustered set up modifying a file only modifies it on a single instance (on one of the app servers) of the various machines in the cluster. Is there an open-source application for Linux that may allow me to keep all of these servers in sync? I have no problem with creating a small VM instance that can listen for changes from machines to sync. In theory, the perfect application would have small clients that run on each machine to be synced, which would talk to the master server which would then decide how/what to sync from each machine. I have already examined the possibilities of running a centralized file server, but unfortunately my app servers are spread out between EC2 and physical machines, which makes this unfeasible. As there are multiple app servers (some of which are dynamically created depending on the load of the site), simply setting up a rsync cron job is not efficient as the cron job would have to be modified on each machine to send files to every other machine in the cluster, and that would just be a whole bunch of unnecessary data transfers/ssh connections.

  Read the article

• Online FTP or file sharing service [on hold]

  - by Frede

  We need to share large files with clients, e.g. clients upload a large file, we modify it and later make it available for download. Up until now we've used FTP but this has a number of drawbacks. A lot of management of files and setting up accounts etc. We are therefore considering online alternatives. Requirements: Cheap, 8-) Easy to use, ideally just requiring a web browser, but also possible for power users to connect e.g. via FTPS/SFTP No registration requried for users to upload/download files. We ourselves of course need to be able to login an view uploaded files and upload new files. No per user fee High bandwidth. As files may be GBs in size both upload and download speed cannot be too slow Secure. Encryption during upload/download. No way for users to access uploaded files. Once a user has uploaded a file they (or anyone else besides us) should be able to access the file. To download files users get a link with a password. Ideally the link expires after a set time. No software installation We do NOT need any sync features, backup, versioning etc. Just a quick, easy, secure way for us to share files with our clients. Services like JustCloud, DriveHQ etc seems bloated and "too much" for what we need. What other alternatives exist? Thanks!

  Read the article

• HP LaserJet 1515: Disable "refill" warning

  - by Pekka

  I have a HP LaserJet 1515 connected to a Windows 7 PC. The Magenta cartridge is empty; the printer shows a warning to that effect, and won't let me print even black-and-white documents any more. I can't turn the warning off manually using the printer's small console: When I try to enter any menu, the display says "Menu access disabled". I have no idea why. There is a setting to override the warning, but it can't be changed using the Network interface in the browser (Although it is there on the status page) According to the manual,the HP printing tool is supposed to offer a switch for this, but it won't install on my Windows 7. It just rumbles about for half an hour, to magnificently exit with an "unknown error" requiring a reboot. On second look, the problem seems to be that Windows 7 just isn't supported. There is no download link for the tool when you specify Windows 7 as your OS. I just want to print a black-and-white-document on a printer whose black cartridge is still 65% full. Is this indeed impossible? On second thought, I'm cross-posting this on the HP support forum. I'll update here if anything comes up.

  Read the article

• Convert Public Folder to Shared Mailbox

  - by Lilienthal

  Due to a change in company policy, all existing Public Folders (PF) have to be phased out in favour of shared mailboxes. Unfortunately, they don't seem to have any procedures or guidelines for this migration and I can't find much online either. I've already migrated one of our public folders so far as a sort of test case. Because we still use Exchange 2003, we can't create real shared mailboxes as we would in 2007 or 2010 (With New-Mailbox -Shared ... in the Exchange Shell). Instead, I simply created a new account on the AD and assigned it a mailbox. I then set the PF's permissions to read-only to keep it in a consistent state and copied the entire folder to a local PST in Outlook 2010, from which the folder was in turn copied to the new mailbox. Permissions and Folder Visible were set for all users and the migration was successful. While this works, the whole procedure feels very hackish to me and not at all efficient. I'd welcome some input on automating or at least streamlining the process. Additionally, we are unsure of what to do with our mail-enabled Public Folders. Several of these are nested under other PFs, some of which are also mail-enabled. Preserving folder structure is a key requirement and this seems impossible at first glance. I've considered creating dummy accounts for all the email addresses from our mail-enabled PFs and then setting up automated rules to forward messages to a subfolder of the new shared mailboxes, but I am not familiar enough with Exchange to know if this is even possible. Further points of concern are the Calendars and Contact lists in our public folders. I suppose I'll be forced to create new mailboxes for every one of these we have as well, then set up share permissions for their Calendar and Contact items, but would be happy to be proven wrong.

  Read the article

• Allocating More Than 4 GB Of Memory

  - by TPatti

  I am facing an issue with memory allocation. I have: Host OS: Microsoft Windows XP - Professional x64 Edition - Version 2003 - Service Pack 2. Host Physical Memory: 8 GB Guest OS: Red Hat Enterprise Linux WS release 4 (Nahant Update 5). I am not sure if it is 32 or 64 bits. The lsb_release -a command says that argument LSB Version: core-3.0-ia32, so I guess that would be 32 bits... VMware Player Version: 2.5.2 build-156735 I would like that VMware Player could allocate more that 4 GB, but when I go to the setting, it only lists 4 GB. If I choose the "About" option, it actually says that I have 8 GB installed in the host machine. This VMware image created by someone else and provided to me, apparently done with VMware Workstation 5. Why can't I allocate 8 GB? Where is the problem? In the WMware Player Version, Guest OS or Host OS? How can I solve this? I understand that for this version of player there isn't one version for 32 and another for 64 bits.

  Read the article

• OSX server setup suggestions

  - by Tom

  I am looking into the possibility to setup an OSX server for my employees, and would like some input on what is the best approach to meet my needs, and perhaps some suggestions if I am moving in the wrong direction. I am thinking of a Mac Mini OSX server, and are not sure if my needs will be met, and what possibilities are out there. I want these capabilities: - Groups/Users managed on server - Shared folders and private folders for users/groups - Access to activated services - Server hosting software for the users (developing tools ++) - Similar to Windows Terminal Server - Virtual desktop environment (both local and over internet/VPN) - Possible to access trough Mac and Windows The reason I am looking at OSX server is that my employees almost only work in OSX environment, and I want to offer the capabilities to logon to the server trough some kind of terminal software, and have full access to their work OSX environment and software on their mac or pc, from anywhere they might be. Instead of having to have multiple setups and need for spending alot of time installing and setting up needed software on every client. This is a small business, where some work on local network, and others from the internet, preferably trough VPN. But a terminal server solution, that are fast and easy to manage would be perfect for our needs. So if anyone have any experience with a similar setup, please let me know what you did, and your experiences with your setup.

  Read the article

• Windows 7 host with Ubuntu Guest and a performance hit, memory locks?

  - by Cyrylski

  I have a brand new Lenovo T510 with Core i5 and 4GB of RAM with Windows 7 on it. I Installed Ubuntu 10.10 in a Virtualbox. For some reason system gets really slow on this setup which makes me really angry. There's a video card shared with full 3D support enabled and 1GB of RAM allocated for the Ubuntu machine. It may sound stupid, but WHY is the whole memory consumed in an instant when I run Virtualbox? I struggled for like 10 minutes restraining myself from a brutal reset, and now everything runs smooth but memory "in use" in Resource Monitor is 3GB flat with only Chrome running. I'm new to Windows 7, but I'm really disappointed with performance at this point... I used to work in a different environment with much slower hardware and there was no such problem (WinXP over Ubuntu, 1GB out of 2GB allocated for WinXP guest on intel GMA). This is, until I clogged RAM totally there. But I was capable of running Chrome, Firefox and Apache server on a 1GB RAM in Ubuntu there and Photoshop CS4 on Windows XP and it worked. In this case I can't go beyond setting up Ubuntu properly. I bet I'm doing something wrong.

  Read the article

• building a debian base image

  - by Michael

  Is there a preferred way to create base images for Debian-based customized installations? We are currently going with multistrap but although it's better than hand-crafted chroot stuff, it still has a lot of edges and corners. Is there a more reliable and less error-prone way to produce a root filesystem of a Debian installation with some additional .debs installed? (I don't want to send out a Debian installer with a preseed file though.) Addendum 1: To clarify things a bit: We are delivering some kind of software appliance to our customers. That is, a debian operating system, with some additional software packages -- both our own and third-party ones -- and some configuration changes. To ease the installation process, we have an installer that does nothing more than partitioning, copying files to the partitions and setting up grub. So it's basically an image-based installer. So we are basically running the debian installation ourselves and just distribute the already installed operating system. The question is about the installation part. I want to have that as easy and robust as possible, and of course, it should be an automated process.

  Read the article

• apache subdomain configuration

  - by terrid25

  I seem to be having a small problem with setting up a subdomain in apache under CentOS. I have the following: <VirtualHost *:80> ServerName www.domain.co.uk ServerAlias domain.co.uk dev.domain.co.uk DocumentRoot "/var/www/html/domain/web" DirectoryIndex index.php Alias /sf /var/www/html/symfony14/web/sf <Directory "/var/www/html/domain/web"> AllowOverride All Allow from All </Directory> </VirtualHost> <Directory "/var/www/html/symfony14/web/sf"> AllowOverride All Allow from All </Directory> <VirtualHost *:80> ServerName test.domain.co.uk DocumentRoot "/var/www/html/domain_test/web" DirectoryIndex index.php Alias /sf /var/www/html/symfony14/web/sf <Directory "/var/www/html/domain_test/web"> AllowOverride All Allow from All </Directory> </VirtualHost> So going to www.domain.co.uk and domain.co.uk display the contents from /var/www/html/domain, but going to test.domain.co.uk also displays the same folder contents. Is this because of the ServerAlias ? Thanks

  Read the article

< Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >