Search Results

Search found 1201 results on 49 pages for 'anti aliasing'.

Page 46/49 | < Previous Page | 42 43 44 45 46 47 48 49  | Next Page >

• The hidden cost of interrupting knowledge workers

  - by Piet

  The November issue of pragpub has an interesting article on interruptions. The article is written by Brian Tarbox, who also mentions the article on his blog. I like the subtitle: ‘Simple Strategies for Avoiding Dumping Your Mental Stack’. Brian talks about the effective cost of interrupting a ‘knowledge worker’, often with trivial questions or distractions. In the eyes of the interruptor, the interruption only costs the time the interrupted had to listen to the question and give an answer. However, depending on what the interrupted was doing at the time, getting fully immersed in their task again might take up to 15-20 minutes. Enough interruptions might even cause a knowledge worker to mentally call it a day. According to this article interruptions can consume about 28% of a knowledge worker’s time, translating in a $588 billion loss for US companies each year. Looking for a new developer to join your team? Ever thought about optimizing your team’s environment and the way they work instead? Making non knowledge workers aware You can’t. Well, I haven’t succeeded yet. And believe me: I’ve tried. When you’ve got a simple way to really increase your productivity (’give me 2 hours of uninterrupted time a day’) it wouldn’t be right not to tell your boss or team-leader about it. The problem is: only productive knowledge workers seem to understand this. People who don’t fall into this category just seem to think you’re joking, being arrogant or anti-social when you tell them the interruptions can really have an impact on your productivity. Also, knowledge workers often work in a very concentrated mental state which is described here as: It is the same mindfulness as ecstatic lovemaking, the merging of two into a fluidly harmonious one. The hallmark of flow is a feeling of spontaneous joy, even rapture, while performing a task. Yes, coding can be addictive and if you’re interrupting a programmer at the wrong moment, you’re effectively bringing down a junkie from his high in just a few seconds. This can result in seemingly arrogant, almost aggressive reactions. How to make people aware of the production-cost they’re inflicting: I’ve been often pondering that question myself. The article suggests that solutions based on that question never seem to work. To be honest: I’ve never even been able to find a half decent solution for this question. People who are not in this situations just don’t understand the issue, no matter how you try to explain it. Fun (?) thing I’ve noticed: Programmers or IT people in general who don’t get this are often the kind of people who just don’t get anything done. Interrupt handling (interruption management?) IRL Have non-urgent questions handled in a non-interruptive way It helps a bit to educate people into using non-interruptive ways to ask questions: “duh, I have no idea, but I’m a bit busy here now could you put it in an email so I don’t forget?”. Eventually, a considerable amount of people will skip interrupting you and just send an email right away. Some stubborn-headed people however will continue to just interrupt you, saying “you’re 10 meters from my desk, why can’t we just talk?”. Just remember to disable your email notifications, it can be hard to resist opening your email client when you know a new email just arrived. Use Do Not Disturb signals When working in a group of programmers, often the unofficial sign you can only be interrupted for something important is to put on headphones. And when the environment is quiet enough, often people aren’t even listening to music. Otherwise music can help to block the indirect distractions (someone else talking on the phone or tapping their feet). You might get a “they’re all just surfing and listening to music”-reaction from outsiders though. Peopleware talks about a team where the no-interruption sign was placing a shawl on the desk. If I remember correctly, I am unable to locate my copy of this really excellent must-read book. If you have all standardized on the same IM tool, maybe that tool has a ‘do not disturb’ setting. Also some phone-systems have a ‘DND’ (do not disturb) setting. Hide Brian offers a number of good suggestions, some obvious like: hide away somewhere they can’t find you. Not sure how long it’ll be till someone thinks you’re just taking a nap somewhere though. Also, this often isn’t possible or your boss might not understand this. And if you really get caught taking a nap, make sure to explain that your were powernapping. Counter-act interruptions Another suggestion he offers is when you’re being interrupted to just hold up your hand, blocking the interruption, and at least giving you time to finish your sentence or your block/line of code. The last suggestion works more as a way to make it obvious to the interruptor that they really are interrupting your work and to offload some of the cost on the interruptor. In practice, this can also helps you cool down a bit so you don’t start saying nasty things to the interruptor. Unfortunately I’ve sometimes been confronted with people who just ignore this signal and keep talking, as if they’re sure that whatever they’ve got to say is really worth listening to and without a doubt more important than anything you might be doing. This behaviour usually leaves me speechless (not good when someone just asked a question). I’ve noticed that these people are usually also the first to complain when being interrupted themselves. They’re generally not very liked as colleagues, so try not to imitate their behaviour. TDD as a way to minimize recovery time I don’t like Test Driven Development. Mainly for only one reason: It interrupts flow. At least, that’s what it does for me, but maybe I’m just not grown used to TDD yet. BUT a positive effect TDD has on me when I have to work in an interruptive environment and can’t really get into the ‘flow’ (also supposedly called ‘the zone’ by software developers, although I’ve never heard it 1st hand), TDD helps me to concentrate on the tasks at hand and helps me to get back at work after an interruption. I feel when using TDD, I can get by without the need for being totally ‘in’ the project and I can be reasonably productive without obtaining ‘flow’. Do you have a suggestion on how to make people aware of the concept of ‘flow’ and the cost of interruptions? (without looking like an arrogant ass or a weirdo)

  Read the article

• Kernel Mode Rootkit

  - by Pajarito

  On the other 3 computers in my family, I believe that we have a kernel-mode rootkit for windows. It appears that the same rootkit is on all of them. We think. We changed all the important passwords from my computer, running linux right now. On all of the infected computers is Symantic Endpoint Protection, because it's free from the university where my mom and dad work. In my opinion symantec is a piece of crap, seeing as it didn't even manager to delete the tracking cookies it found when I tried it on my own computer. The Computers and their set-ups: Computer A: Vista Business; symantec antivirus. runs it as admin, no password. IE8. no other security software other than what comes with windows. IE8 security settings the default Computer B: XP Home Premium; symantec antivirus. runs as normal user, no password, admin account with weak password, spybot, uses IE8 with default settings, sometimes Firefox Computer C: XP Home Premium; symantec antivirus. runs as normal user, no password, admin account with weak password, uses IE8 with default settings, no other security programs except what came with windows This is what's happening. Cut and pasted from my dad's forum post. -- When I scanned my laptop (Dell XPS M1330 with Windows Vista Small Business), Symantec Endpoint Protection hangs for a while, perhaps 10 seconds or so, on some of the following files 9129837.exe, hide_evr2.sys, VirusRemoval.vbs, NewVirusRemoval.vbs, dll.dll, alsmt.ext, and _epnt.sys. It does this if a run a scan that I set up to run on a new thumbnail drive and it does this even if the thumbnail is not plugged in. It doesn't seem to do this if I scan only the C: drive. I've check for problems with symantec endpoint protection and also with Microsoft Security Essentials and Malwarebytes Anti-Malware. They found nothing and I can't find anything by searching for hidden files. Next I tried microsoft's rootkitrevealer. It (rootkitrevealer) finds 279660 (or so) discrepancies and the interface is so glitchy after that I can't really figure out what is going on. The screen is squirrely. The rootkitrevealer pulls up many files in the folder \programdata\applicationdata and there are numberous appended \applicationdata on the end of that as well. -- As you can see, what we did was install MSE and MBAM and scan with both of them. Nothing but a tracking cookie. Then I took over and ran rootkitrevealer.exe from MicroSoft from a flash drive. It found a bunch of discrepancies, but only about 20 or so where security related, the rest being files that you just couldn't see from Windows Explorer. I couldn't see whether of not the files list above, the ones that the scan was hanging on, where in the list. The other thing is, I have no idea what to do about the things the scan comes up with. Then we checked the other computers and they do the same thing when you scan with Symantec. The people at the university seen to think that dad might not have a virus, but 2 of the computers slowed down noticably AND IE8 started acting all funny. None of my family is very computer oriented, and 2 of the possible causes for the rootkit are: -My dad bought a new flash drive, which shipped with a data security executable on it -My dad has to download lots of articles for his work Those are the only things that stand out, but it could have been anything. We are currently backing up our data, and I'll post again after trying IceSword 1.22. I just looked at my dad's forum topic, and someone recommended GMER. I'll try that too.

  Read the article

• Time Tracking on an Agile Team

  - by Stephen.Walther

  What’s the best way to handle time-tracking on an Agile team? Your gut reaction to this question might be to resist any type of time-tracking at all. After all, one of the principles of the Agile Manifesto is “Individuals and interactions over processes and tools”.  Forcing the developers on your team to track the amount of time that they devote to completing stories or tasks might seem like useless bureaucratic red tape: an impediment to getting real work done. I completely understand this reaction. I’ve been required to use time-tracking software in the past to account for each hour of my workday. It made me feel like Fred Flintstone punching in at the quarry mine and not like a professional. Why You Really Do Need Time-Tracking There are, however, legitimate reasons to track time spent on stories even when you are a member of an Agile team.  First, if you are working with an outside client, you might need to track the number of hours spent on different stories for the purposes of billing. There might be no way to avoid time-tracking if you want to get paid. Second, the Product Owner needs to know when the work on a story has gone over the original time estimated for the story. The Product Owner is concerned with Return On Investment. If the team has gone massively overtime on a story, then the Product Owner has a legitimate reason to halt work on the story and reconsider the story’s business value. Finally, you might want to track how much time your team spends on different types of stories or tasks. For example, if your team is spending 75% of their time doing testing then you might need to bring in more testers. Or, if 10% of your team’s time is expended performing a software build at the end of each iteration then it is time to consider better ways of automating the build process. Time-Tracking in SonicAgile For these reasons, we added time-tracking as a feature to SonicAgile which is our free Agile Project Management tool. We were heavily influenced by Jeff Sutherland (one of the founders of Scrum) in the way that we implemented time-tracking (see his article http://scrum.jeffsutherland.com/2007/03/time-tracking-is-anti-scrum-what-do-you.html). In SonicAgile, time-tracking is disabled by default. If you want to use this feature then the project owner must enable time-tracking in Project Settings. You can choose to estimate using either days or hours. If you are estimating at the level of stories then it makes more sense to choose days. Otherwise, if you are estimating at the level of tasks then it makes more sense to use hours. After you enable time-tracking then you can assign three estimates to a story: Original Estimate – This is the estimate that you enter when you first create a story. You don’t change this estimate. Time Spent – This is the amount of time that you have already devoted to the story. You update the time spent on each story during your daily standup meeting. Time Left – This is the amount of time remaining to complete the story. Again, you update the time left during your daily standup meeting. So when you first create a story, you enter an original estimate that becomes the time left. During each daily standup meeting, you update the time spent and time left for each story on the Kanban. If you had perfect predicative power, then the original estimate would always be the same as the sum of the time spent and the time left. For example, if you predict that a story will take 5 days to complete then on day 3, the story should have 3 days spent and 2 days left. Unfortunately, never in the history of mankind has anyone accurately predicted the exact amount of time that it takes to complete a story. For this reason, SonicAgile does not update the time spent and time left automatically. Each day, during the daily standup, your team should update the time spent and time left for each story. For example, the following table shows the history of the time estimates for a story that was originally estimated to take 3 days but, eventually, takes 5 days to complete: Day Original Estimate Time Spent Time Left Day 1 3 days 0 days 3 days Day 2 3 days 1 day 2 days Day 3 3 days 2 days 2 days Day 4 3 days 3 days 2 days Day 5 3 days 4 days 0 days In the table above, everything goes as predicted until you reach day 3. On day 3, the team realizes that the work will require an additional two days. The situation does not improve on day 4. All of the sudden, on day 5, all of the remaining work gets done. Real work often follows this pattern. There are long periods when nothing gets done punctuated by occasional and unpredictable bursts of progress. We designed SonicAgile to make it as easy as possible to track the time spent and time left on a story. Detecting when a Story Goes Over the Original Estimate Sometimes, stories take much longer than originally estimated. There’s a surprise. For example, you discover that a new software component is incompatible with existing software components. Or, you discover that you have to go through a month-long certification process to finish a story. In those cases, the Product Owner has a legitimate reason to halt work on a story and re-evaluate the business value of the story. For example, the Product Owner discovers that a story will require weeks to implement instead of days, then the story might not be worth the expense. SonicAgile displays a warning on both the Backlog and the Kanban when the time spent on a story goes over the original estimate. An icon of a clock is displayed. Time-Tracking and Tasks Another optional feature of SonicAgile is tasks. If you enable Tasks in Project Settings then you can break stories into one or more tasks. You can perform time-tracking at the level of a story or at the level of a task. If you don’t break a story into tasks then you can enter the time left and time spent for the story. As soon as you break a story into tasks, then you can no longer enter the time left and time spent at the level of the story. Instead, the time left and time spent for a story is rolled up from its tasks. On the Kanban, you can see how the time left and time spent for each task gets rolled up into each story. The progress bar for the story is rolled up from the progress bars for each task. The original estimate is never rolled up – even when you break a story into tasks. A story’s original estimate is entered separately from the original estimates of each of the story’s tasks. Summary Not every Agile team can avoid time-tracking. You might be forced to track time to get paid, to detect when you are spending too much time on a particular story, or to track the amount of time that you are devoting to different types of tasks. We designed time-tracking in SonicAgile to require the least amount of work to track the information that you need. Time-tracking is an optional feature. If you enable time-tracking then you can track the original estimate, time left, and time spent for each story and task. You can use time-tracking with SonicAgile for free. Register at http://SonicAgile.com.

  Read the article

• How To Remove People and Objects From Photographs In Photoshop

  - by Eric Z Goodnight

  You might think that it’s a complicated process to remove objects from photographs. But really Photoshop makes it quite simple, even when removing all traces of a person from digital photographs. Read on to see just how easy it is. Photoshop was originally created to be an image editing program, and it excels at it. With hardly any Photoshop experience, any beginner can begin removing objects or people from their photos. Have some friends that photobombed an otherwise great pic? Tell them to say their farewells, because here’s how to get rid of them with Photoshop! Tools for Removing Objects Removing an object is not really “magical” work. Your goal is basically to cover up the information you don’t want in an image with information you do want. In this sample image, we want to remove the cigar smoking man, and leave the geisha. Here’s a couple of the tools that can be useful to work with when attempting this kind of task. Clone Stamp and Pattern Stamp Tool: Samples parts of your image from your background, and allows you to paint into your image with your mouse or stylus. Eraser and Brush Tools: Paint flat colors and shapes, and erase cloned layers of image information. Basic, down and dirty photo editing tools. Pen, Quick Selection, Lasso, and Crop tools: Select, isolate, and remove parts of your image with these selection tools. All useful in their own way. Some, like the pen tool, are nightmarishly tough on beginners. Remove a Person with the Clone Stamp Tool (Video) The video above uses the Clone Stamp tool to sample and paint with the background texture. It’s a simple tool to use, although it can be confusing, possibly counter-intuitive. Here’s some pointers, in addition to the video above. Select shortcut key to choose the Clone tool stamp from the Tools Panel. Always create a copy of your background layer before doing heavy edits by right clicking on the background in your Layers Panel and selecting “Duplicate.” Hold with the Clone Tool selected, and click anywhere in your image to sample that area. When you’re sampling an area, your cursor is “Aligned” with your sample area. When you paint, your sample area moves. You can turn the “Aligned” setting off by clicking the in the Options Panel at the top of your screen if you want. Change your brush size and hardness as shown in the video by right-clicking in your image. Use your lasso to copy and paste pieces of your image in order to cover up any parts that seem appropriate. Photoshop Magic with the “Content-Aware Fill” One of the hallmark features of CS5 is the “Content-Aware Fill.” Content aware fill can be an excellent shortcut to removing objects and even people in Photoshop, but it is somewhat limited, and can get confused. Here’s a basic rundown on how it works. Select an object using your Lasso tool, shortcut key . The Lasso works fine as this selection can be rough. Navigate to Edit > Fill, and select “Content-Aware,” as illustrated above, from the pull-down menu. It’s surprisingly simple. After some processing, Photoshop has done the work of removing the object for you. It takes a few moments, and it is not perfect, so be prepared to touch it up with some Copy-Paste, or some Clone stamp action. Content Aware Fill Has Its Limits Keep in mind that the Content Aware Fill is meant to be used with other techniques in mind. It doesn’t always perform perfectly, but can give you a great starting point. Take this image for instance. It is actually plausible to hide this figure and make this image look like he was never there at all. With a selection made with the Lasso tool, navigate to Edit > Fill and select “Content Aware” again. The result is surprisingly good, but as you can see, worthy of some touch up. With a result like this one, you’ll have to get your hands dirty with copy-paste to create believable lines in the background. With many photographs, Content Aware Fill will simply get confused and give you results you won’t be happy with. Additional Touch Up for Bad Background Textures with the Pattern Stamp Tool For the perfectionist, cleaning up the lumpy looking textures that the Clone Stamp can leave is fairly simple using the Pattern Stamp Tool. Sample an piece of your image with your Marquee Tool, shortcut key . Navigate to Edit > Define Pattern to create a new Pattern from your selection. Click OK to continue. Click and hold down on the Clone Stamp tool in your Tools Panel until you can select the Pattern Stamp Tool. Pick your new pattern from the Options at the top of your screen, in the Options Panel. Then simply right click in your image in order to pick as soft a brush as possible to paint with. Paint into your image until your background is as smooth as you want it to be, making your painted out object more and more invisible. If you get lines from your repeated texture, experiment turning the on and off and paint over them. In addition to this, simple use of the Crop Tool, shortcut , can recompose an image, making it look as if it never had another object in it at all. Combine these techniques to find a method that works best for your images. Have questions or comments concerning Graphics, Photos, Filetypes, or Photoshop? Send your questions to [email protected], and they may be featured in a future How-To Geek Graphics article. Image Credits: Geisha Kyoto Gion by Todd Laracuenta via Wikipedia, used under Creative Commons. Moai Rano raraku by Aurbina, in Public Domain. Chris Young visits Wrigley by TonyTheTiger, via Wikipedia, used under Creative Commons. Latest Features How-To Geek ETC Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide CyanogenMod Updates; Rolls out Android 2.3 to the Less Fortunate MyPaint is an Open-Source Graphics App for Digital Painters Can the Birds and Pigs Really Be Friends in the End? [Angry Birds Video] Add the 2D Version of the New Unity Interface to Ubuntu 10.10 and 11.04 MightyMintyBoost Is a 3-in-1 Gadget Charger Watson Ties Against Human Jeopardy Opponents

  Read the article

• Windows 7 BSOD - ntoskrnl?

  - by Ken Mason

  2 new HP Pavilion notebooks with 7 Home Premium pre-loaded with Norton. My first act was to use the Norton Removal Tool and load ZoneAlarm free and AVG Free. Frequent random BSOD's ever since...I found my way into Debug and have had various reports regarding ntoskrnl, depending on the status of symbols. It's been many years since I played with (DOS 3.x) debug, so this has been a considerable fumble. Excerpts follow and any insights would be greatly appreciated, as I am not a developer: ADDITIONAL_DEBUG_TEXT: Use '!findthebuild' command to search for the target build information. If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols. MODULE_NAME: nt FAULTING_MODULE: fffff8000305d000 nt DEBUG_FLR_IMAGE_TIMESTAMP: 4b88cfeb BUGCHECK_STR: 0x7f_8 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from fffff800030ccb69 to fffff800030cd600 STACK_TEXT: fffff80004d6fd28 fffff800030ccb69 : 000000000000007f 0000000000000008 0000000080050033 00000000000006f8 : nt+0x70600 fffff80004d6fd30 000000000000007f : 0000000000000008 0000000080050033 00000000000006f8 fffff80003095e58 : nt+0x6fb69 fffff80004d6fd38 0000000000000008 : 0000000080050033 00000000000006f8 fffff80003095e58 0000000000000000 : 0x7f fffff80004d6fd40 0000000080050033 : 00000000000006f8 fffff80003095e58 0000000000000000 0000000000000000 : 0x8 fffff80004d6fd48 00000000000006f8 : fffff80003095e58 0000000000000000 0000000000000000 0000000000000000 : 0x80050033 fffff80004d6fd50 fffff80003095e58 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : 0x6f8 fffff80004d6fd58 0000000000000000 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt+0x38e58 STACK_COMMAND: kb FOLLOWUP_IP: nt+70600 fffff800`030cd600 48894c2408 mov qword ptr [rsp+8],rcx SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: nt+70600 FOLLOWUP_NAME: MachineOwner IMAGE_NAME: ntoskrnl.exe BUCKET_ID: WRONG_SYMBOLS Followup: MachineOwner ...................................................................... 0: kd !lmi nt Loaded Module Info: [nt] Module: ntkrnlmp Base Address: fffff8000305d000 Image Name: ntkrnlmp.exe Machine Type: 34404 (X64) Time Stamp: 4b88cfeb Sat Feb 27 00:55:23 2010 Size: 5dc000 CheckSum: 545094 Characteristics: 22 perf Debug Data Dirs: Type Size VA Pointer CODEVIEW 25, 19c65c, 19bc5c RSDS - GUID: {7E9A3CAB-6268-45DE-8E10-816E3080A3B7} Age: 2, Pdb: ntkrnlmp.pdb CLSID 4, 19c658, 19bc58 [Data not mapped] Image Type: FILE - Image read successfully from debugger. ntkrnlmp.exe Symbol Type: PDB - Symbols loaded successfully from symbol server. d:\debugsymbols\ntkrnlmp.pdb\7E9A3CAB626845DE8E10816E3080A3B72\ntkrnlmp.pdb Load Report: public symbols , not source indexed d:\debugsymbols\ntkrnlmp.pdb\7E9A3CAB626845DE8E10816E3080A3B72\ntkrnlmp.pdb 0: kd !analyze -v * Bugcheck Analysis * * UNEXPECTED_KERNEL_MODE_TRAP (7f) This means a trap occurred in kernel mode, and it's a trap of a kind that the kernel isn't allowed to have/catch (bound trap) or that is always instant death (double fault). The first number in the bugcheck params is the number of the trap (8 = double fault, etc) Consult an Intel x86 family manual to learn more about what these traps are. Here is a portion of those codes: If kv shows a taskGate use .tss on the part before the colon, then kv. Else if kv shows a trapframe use .trap on that value Else .trap on the appropriate frame will show where the trap was taken (on x86, this will be the ebp that goes with the procedure KiTrap) Endif kb will then show the corrected stack. Arguments: Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT Arg2: 0000000080050033 Arg3: 00000000000006f8 Arg4: fffff80003095e58 Debugging Details: BUGCHECK_STR: 0x7f_8 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: System CURRENT_IRQL: 2 LAST_CONTROL_TRANSFER: from fffff800030ccb69 to fffff800030cd600 STACK_TEXT: fffff80004d6fd28 fffff800030ccb69 : 000000000000007f 0000000000000008 0000000080050033 00000000000006f8 : nt!KeBugCheckEx fffff80004d6fd30 fffff800030cb032 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiBugCheckDispatch+0x69 fffff80004d6fe70 fffff80003095e58 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDoubleFaultAbort+0xb2 fffff880089efc60 0000000000000000 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!SeAccessCheckFromState+0x58 STACK_COMMAND: kb FOLLOWUP_IP: nt!KiDoubleFaultAbort+b2 fffff800`030cb032 90 nop SYMBOL_STACK_INDEX: 2 SYMBOL_NAME: nt!KiDoubleFaultAbort+b2 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4b88cfeb FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2 BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2 Followup: MachineOwner I tried running Rootkit Revealer but I don't think it works on x64 systems. Similarly Blacklight seems to have aged off. I'm running Sophos Anti-Rootkit now. So far so good...

  Read the article

• How accurate is "Business logic should be in a service, not in a model"?

  - by Jeroen Vannevel

  Situation Earlier this evening I gave an answer to a question on StackOverflow. The question: Editing of an existing object should be done in repository layer or in service? For example if I have a User that has debt. I want to change his debt. Should I do it in UserRepository or in service for example BuyingService by getting an object, editing it and saving it ? My answer: You should leave the responsibility of mutating an object to that same object and use the repository to retrieve this object. Example situation: class User { private int debt; // debt in cents private string name; // getters public void makePayment(int cents){ debt -= cents; } } class UserRepository { public User GetUserByName(string name){ // Get appropriate user from database } } A comment I received: Business logic should really be in a service. Not in a model. What does the internet say? So, this got me searching since I've never really (consciously) used a service layer. I started reading up on the Service Layer pattern and the Unit Of Work pattern but so far I can't say I'm convinced a service layer has to be used. Take for example this article by Martin Fowler on the anti-pattern of an Anemic Domain Model: There are objects, many named after the nouns in the domain space, and these objects are connected with the rich relationships and structure that true domain models have. The catch comes when you look at the behavior, and you realize that there is hardly any behavior on these objects, making them little more than bags of getters and setters. Indeed often these models come with design rules that say that you are not to put any domain logic in the the domain objects. Instead there are a set of service objects which capture all the domain logic. These services live on top of the domain model and use the domain model for data. (...) The logic that should be in a domain object is domain logic - validations, calculations, business rules - whatever you like to call it. To me, this seemed exactly what the situation was about: I advocated the manipulation of an object's data by introducing methods inside that class that do just that. However I realize that this should be a given either way, and it probably has more to do with how these methods are invoked (using a repository). I also had the feeling that in that article (see below), a Service Layer is more considered as a façade that delegates work to the underlying model, than an actual work-intensive layer. Application Layer [his name for Service Layer]: Defines the jobs the software is supposed to do and directs the expressive domain objects to work out problems. The tasks this layer is responsible for are meaningful to the business or necessary for interaction with the application layers of other systems. This layer is kept thin. It does not contain business rules or knowledge, but only coordinates tasks and delegates work to collaborations of domain objects in the next layer down. It does not have state reflecting the business situation, but it can have state that reflects the progress of a task for the user or the program. Which is reinforced here: Service interfaces. Services expose a service interface to which all inbound messages are sent. You can think of a service interface as a façade that exposes the business logic implemented in the application (typically, logic in the business layer) to potential consumers. And here: The service layer should be devoid of any application or business logic and should focus primarily on a few concerns. It should wrap Business Layer calls, translate your Domain in a common language that your clients can understand, and handle the communication medium between server and requesting client. This is a serious contrast to other resources that talk about the Service Layer: The service layer should consist of classes with methods that are units of work with actions that belong in the same transaction. Or the second answer to a question I've already linked: At some point, your application will want some business logic. Also, you might want to validate the input to make sure that there isn't something evil or nonperforming being requested. This logic belongs in your service layer. "Solution"? Following the guidelines in this answer, I came up with the following approach that uses a Service Layer: class UserController : Controller { private UserService _userService; public UserController(UserService userService){ _userService = userService; } public ActionResult MakeHimPay(string username, int amount) { _userService.MakeHimPay(username, amount); return RedirectToAction("ShowUserOverview"); } public ActionResult ShowUserOverview() { return View(); } } class UserService { private IUserRepository _userRepository; public UserService(IUserRepository userRepository) { _userRepository = userRepository; } public void MakeHimPay(username, amount) { _userRepository.GetUserByName(username).makePayment(amount); } } class UserRepository { public User GetUserByName(string name){ // Get appropriate user from database } } class User { private int debt; // debt in cents private string name; // getters public void makePayment(int cents){ debt -= cents; } } Conclusion All together not much has changed here: code from the controller has moved to the service layer (which is a good thing, so there is an upside to this approach). However this doesn't look like it had anything to do with my original answer. I realize design patterns are guidelines, not rules set in stone to be implemented whenever possible. Yet I have not found a definitive explanation of the service layer and how it should be regarded. Is it a means to simply extract logic from the controller and put it inside a service instead? Is it supposed to form a contract between the controller and the domain? Should there be a layer between the domain and the service layer? And, last but not least: following the original comment Business logic should really be in a service. Not in a model. Is this correct? How would I introduce my business logic in a service instead of the model?

  Read the article

• CodePlex Daily Summary for Wednesday, July 31, 2013

  CodePlex Daily Summary for Wednesday, July 31, 2013Popular ReleasesSharePoint 2010 Export User Information to Text file, SQL server: Full Source code of the project: Please change SharePoint server address. I have used my sharepoint server -> http://sneakpreviewWINJS CTK (Control Toolkit): Initial Release: Initial release supports the following. Expander NumericBoxXMLPreprocess: 2.0.18: What's new in this release For XML Spreadsheet 2003 format, used the frozen row at the top of the worksheet to indicate the beginning of the values. This prevents you from having to start your values at row 7. This can be overridden with the /firstValueRow (or /vr) argument. Issues Fixed Fix for Issue 13006 : Corrected default treatment of the value "false" Beginning with this version, the FixFalse behavior that has caused confusion to so many, has hopefully been addressed in a way that st...MVVM.EventToCommand: Tommy.MVVM.EventToCommand: Tommy.MVVM.EventToCommand is a free, open source developer focused event2command via WinRT for MVVM Pattern.MVC Generator: MVC Generator Visual Studio Addin: This is the latest build, this includes the MVCGenerator.dll, and Visual Studio Addin file. See the home page of this project for installation instructions.Project Nonnon: 2013_07_30: ----------==========----------==========----------==========---------- "No news is good news." ----------==========----------==========----------==========---------- Change Log 2013/07/30 BUGFIX game/sound/directsound.c n_directsound_loop() OLD : crash when DirectSound is not supported NEW : fixed game/sound/waveout.c when included OLD : compile error NEW : fixed game/chara.c when included OLD : compile error NEW : fixed game/direct2d.c when included ...Dynamics CRM 2011 EasyPlugins: EasyPlugins-1.2.3.1-managed: V1.2.3.1 - Bug Fix : Condition expression is not saved on action creation - Bug Fix : Request Param with single attribute result - Some style changes v1.2.3.0 - Bug Fix : Twice plugins execution. - New Abort action - Depth Plugin Execution management on each action - Turn On/Off EasyPlugins feature (can be useful in some cases of imports) v1.2.0.0 Associate / Disassociate actions are now available Import / Export features Better management of Lookups Trigger NamingXmlObjectMapper: XOM Alpha 1.0: first Alpha Version of XOM: read and write xml nodes and attributes mapping to IList or Interfaces simple property attribute mapping creates new xml nodes at run time IList changes (add, remove) implemented in the next releasenopCommerce. Open source shopping cart (ASP.NET MVC): nopCommerce 3.10: Highlight features & improvements: • Performance optimization. • New more user-friendly product/product-variant logic. Now we'll have only products (simple and grouped). • Bundle products support added. • Allow a store owner to associate product image for product variant attribute values. To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).ExtJS based ASP.NET Controls: FineUI v3.3.1: ??FineUI ?? ExtJS ??? ASP.NET ???。 FineUI??? ?? No JavaScript，No CSS，No UpdatePanel，No ViewState，No WebServices ???????。 ?????? IE 7.0、Firefox 3.6、Chrome 3.0、Opera 10.5、Safari 3.0+ ???? Apache License v2.0 ?：ExtJS ?? GPL v3 ?????(http://www.sencha.com/license)。 ???? ??：http://fineui.com/bbs/ ??：http://fineui.com/demo/ ??：http://fineui.com/doc/ ??：http://fineui.codeplex.com/ FineUI ???? ExtJS ????????，???? ExtJS ?，???????????ExtJS?： 1. ????? FineUI ? ExtJS ?：http://fineui.com/bbs/fo...AutoNLayered - Domain Oriented N-Layered .NET 4.5: AutoNLayered v1.0.5: - Fix Dtos. Abstract collections replaced by concrete (correct serialization WCF). - OrderBy in navigation properties. - Unit Test with Fakes. - Map of entities/dto moved to application services. - Libraries updated. Warning using Fakes: http://connect.microsoft.com/VisualStudio/feedback/details/782031/visual-studio-2012-add-fakes-assembly-does-not-add-all-needed-referencesPath Copy Copy: 11.1: Minor release with two new features: Submenu's contextual menu item now has an icon next to it Added reference to JavaScript regular expression format in Settings application Since this release does not have any glaring bug fixes, it is more of an optional update for existing users. It depends on whether you want to be able to spot the Path Copy Copy submenu more easily. I recommend you install it to see if the icon makes sense. As always, please don't hesitate to leave feedback via Discus...CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.0 RC3: This is the third release candidate of CMake Tools for Visual Studio 1.0, which contains the following bug fixes: Opening a CMake file from Windows Explorer while Visual Studio is already open will no start a new instance of Visual Studio. Typing a symbol while the IntelliSense list box is visible and the text typed so far does not match any item in the list will dismiss the list box and insert the symbol typed.R.NET: R.NET 1.5: The major changes in v1.5 are: Initialize method must be called before using R. Settings should be passed to the method. EagerEvaluate method renamed to Evaluate (use Defer method when you want old version of Evaluate).Media Companion: Media Companion MC3.574b: Some good bug fixes been going on with the new XBMC-Link function. Thanks to all who were able to do testing and gave feedback. New:* Added some adhoc extra General movie filters, one of which is Plot = Outline (see fixes above). To see the filters, add the following line to your config.xml: <ShowExtraMovieFilters>True</ShowExtraMovieFilters>. The others are: Imdb in folder name, Imdb in not folder name & Imdb not in folder name & year mismatch. * Movie - display <tag> list on browser tab ...OfflineBrowser: Preview Release with Search: I've added search to this release.VG-Ripper & PG-Ripper: VG-Ripper 2.9.46: changes FIXED LoginMath.NET Numerics: Math.NET Numerics v2.6.0: What's New in Math.NET Numerics 2.6 - Announcement, Explanations and Sample Code. New: Linear Curve Fitting Linear least-squares fitting (regression) to lines, polynomials and linear combinations of arbitrary functions. Multi-dimensional fitting. Also works well in F# with the F# extensions. New: Root Finding Brent's method. ~Candy Chiu, Alexander Täschner Bisection method. ~Scott Stephens, Alexander Täschner Broyden's method, for multi-dimensional functions. ~Alexander Täschner ...AJAX Control Toolkit: July 2013 Release: AJAX Control Toolkit Release Notes - July 2013 Release Version 7.0725July 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - Instructions for using the AJAX Control Toolkit with ASP.NET 4.5 can be found at...MJP's DirectX 11 Samples: Specular Antialiasing Sample: Sample code to complement my presentation that's part of the Physically Based Shading in Theory and Practice course at SIGGRAPH 2013, entitled "Crafting a Next-Gen Material Pipeline for The Order: 1886". Demonstrates various methods of preventing aliasing from specular BRDF's when using high-frequency normal maps. The zip file contains source code as well as a pre-compiled x64 binary.New ProjectsA Simple Java Encryption program: This is my very first Java project. It's a file encryptor. It's purpose is to codify a file to make it look like it contain random information.AA??: aa??，????。Browser Chooser 2: Browser Chooser 2 is an updated fork of the original. It's primary goal is to simplify using multiple browser.campuscloud-mobile: Dieses Projekt enthält die mobilen Apps zur Campuscloud App.campuscloud-owncloudplugins: Dieses Projekt enthält die ownCloud-Plugins zu den CampuCloud-Apps, die ownCloud-Server um weitere Funktionalitäten ergänzen.campuscloud-windowsphone8: Diese Projekt enthält die Windows Phone 8 App zur Campuscloud App.Chronos .Net Performance Profiler: Free .Net Performance ProfilerConvertServer: a pet project i works onDevelopment Tools for Solid Edge: Development tools for Solid Edge.DocAssist: The project is to facilitate user's day-to-day management of her files in a customisable way on Windows System equipped with .NET framework.epe: epeETP 3: prueba de asp mvc para desarrollar conjuntamente en un repositorio tfsHello World in MVC4: Application to testInvoke-MsTest PowerShell Module: A PowerShell module that makes unit testing Visual Studio projects fast and easy. Uses MsTest.exe to launch all test associated with your project or solution.MarathonTP: MarathonTP (TP stands for Transport Protocol) is a lightweight communication protocol specificaly developped for machine to machine communication.Multicopter Simulator: A simulation environment for multicopter built with Microsoft Robotics Developer Studio 4.MVC Rags: A bunch of ASP.NET MVC4 helpersMVVM.EventToCommand: Tommy.MVVM.EventToCommand is a free, open source developer focused event2command via WinRT for MVVM Pattern.RNT.Common: rnt.commonStorageOrizer: Software to manage disk space, e.g. move Programs without damaging function. Subset Sum Problem Solver: SubsetThirdPartyLogin: ?????twitterBootstrapAspNetMVCControls: Asp.net MVC Controls based on twiiter Boostrap( a beautiful html & css framework published by Twitter).Unify: Unify is an automatic IoC Container Configurator, based on layers approach via annotations.V32 Assembler: The assembler for my assembly language for my 32-bit virtual machine with a home-made instruction set.

  Read the article

• Refactoring Part 1 : Intuitive Investments

  - by Wes McClure

  Fear, it’s what turns maintaining applications into a nightmare.  Technology moves on, teams move on, someone is left to operate the application, what was green is now perceived brown.  Eventually the business will evolve and changes will need to be made.  The approach to those changes often dictates the long term viability of the application.  Fear of change, lack of passion and a lack of interest in understanding the domain often leads to a paranoia to do anything that doesn’t involve duct tape and bailing twine.  Don’t get me wrong, those have a place in the short term viability of a project but they don’t have a place in the long term.  Add to it “us versus them” in regards to the original team and those that maintain it, internal politics and other factors and you have a recipe for disaster.  This results in code that quickly becomes unmanageable.  Even the most clever of designs will eventually become sub optimal and debt will amount that exponentially makes changes difficult.  This is where refactoring comes in, and it’s something I’m very passionate about.  Refactoring is about improving the process whereby we make change, it’s an exponential investment in the process of change. Without it we will incur exponential complexity that halts productivity. Investments, especially in the long term, require intuition and reflection.  How can we tackle new development effectively via evolving the original design and paying off debt that has been incurred? The longer we wait to ask and answer this question, the more it will cost us.  Small requests don’t warrant big changes, but realizing when changes now will pay off in the long term, and especially in the short term, is valuable. I have done my fair share of maintaining applications and continuously refactoring as needed, but recently I’ve begun work on a project that hasn’t had much debt, if any, paid down in years.  This is the first in a series of blog posts to try to capture the process which is largely driven by intuition of smaller refactorings from other projects. Signs that refactoring could help: Testability How can decreasing test time not pay dividends? One of the first things I found was that a very important piece often takes 30+ minutes to test.  I can only imagine how much time this has cost historically, but more importantly the time it might cost in the coming weeks: I estimate at least 10-20 hours per person!  This is simply unacceptable for almost any situation.  As it turns out, about 6 hours of working with this part of the application and I was able to cut the time down to under 30 seconds!  In less than the lost time of one week, I was able to fix the problem for all future weeks! If we can’t test fast then we can’t change fast, nor with confidence. Code is used by end users and it’s also used by developers, consider your own needs in terms of the code base.  Adding logic to enable/disable features during testing can help decouple parts of an application and lead to massive improvements.  What exactly is so wrong about test code in real code?  Often, these become features for operators and sometimes end users.  If you cannot run an integration test within a test runner in your IDE, it’s time to refactor. Readability Are variables named meaningfully via a ubiquitous language? Is the code segmented functionally or behaviorally so as to minimize the complexity of any one area? Are aspects properly segmented to avoid confusion (security, logging, transactions, translations, dependency management etc) Is the code declarative (what) or imperative (how)?  What matters, not how.  LINQ is a great abstraction of the what, not how, of collection manipulation.  The Reactive framework is a great example of the what, not how, of managing streams of data. Are constants abstracted and named, or are they just inline? Do people constantly bitch about the code/design? If the code is hard to understand, it will be hard to change with confidence.  It’s a large undertaking if the original designers didn’t pay much attention to readability and as such will never be done to “completion.”  Make sure not to go over board, instead use this as you change an application, not in lieu of changes (like with testability). Complexity Simplicity will never be achieved, it’s highly subjective.  That said, a lot of code can be significantly simplified, tidy it up as you go.  Refactoring will often converge upon a simplification step after enough time, keep an eye out for this. Understandability In the process of changing code, one often gains a better understanding of it.  Refactoring code is a good way to learn how it works.  However, it’s usually best in combination with other reasons, in effect killing two birds with one stone.  Often this is done when readability is poor, in which case understandability is usually poor as well.  In the large undertaking we are making with this legacy application, we will be replacing it.  Therefore, understanding all of its features is important and this refactoring technique will come in very handy. Unused code How can deleting things not help? This is a freebie in refactoring, it’s very easy to detect with modern tools, especially in statically typed languages.  We have VCS for a reason, if in doubt, delete it out (ok that was cheesy)! If you don’t know where to start when refactoring, this is an excellent starting point! Duplication Do not pray and sacrifice to the anti-duplication gods, there are excellent examples where consolidated code is a horrible idea, usually with divergent domains.  That said, mediocre developers live by copy/paste.  Other times features converge and aren’t combined.  Tools for finding similar code are great in the example of copy/paste problems.  Knowledge of the domain helps identify convergent concepts that often lead to convergent solutions and will give intuition for where to look for conceptual repetition. 80/20 and the Boy Scouts It’s often said that 80% of the time 20% of the application is used most.  These tend to be the parts that are changed.  There are also parts of the code where 80% of the time is spent changing 20% (probably for all the refactoring smells above).  I focus on these areas any time I make a change and follow the philosophy of the Boy Scout in cleaning up more than I messed up.  If I spend 2 hours changing an application, in the 20%, I’ll always spend at least 15 minutes cleaning it or nearby areas. This gives a huge productivity edge on developers that don’t. Ironically after a short period of time the 20% shrinks enough that we don’t have to spend 80% of our time there and can move on to other areas.   Refactoring is highly subjective, never attempt to refactor to completion!  Learn to be comfortable with leaving one part of the application in a better state than others.  It’s an evolution, not a revolution.  These are some simple areas to look into when making changes and can help get one started in the process.  I’ve often found that refactoring is a convergent process towards simplicity that sometimes spans a few hours but often can lead to massive simplifications over the timespan of weeks and months of regular development.

  Read the article

• Probation is Over: PASS Board Year 1, Q2

  - by Denise McInerney

  Though it's not always official every job begins with a probation period. You start out with lots of questions and every day you find out how much more you have to learn. Usually after a few months you discover that you can actually answer some questions and have at least an idea of what you are supposed to be doing. Now at the end of my second quarter on the "job" of serving on the PASS Board I have reached that point. My probation period is over. The last three months were busy for the entire Board with the budget process, an in-person meeting and moving forward with PASS Global Growth plans. I had also set a specific goal for myself for my 2nd quarter: to see the Board to adopt a Code of Conduct for the PASS Summit. Code of Conduct When I ran for the Board I included my desire to see PASS establish a code of conduct in my campaign platform.  I was motivated to do this for a few reasons. Other technical conferences have had incidents of harassment. Most of these did not have a policy in place prior to having a problem, though several conference organizers have since adopted anti-harassment policies or codes of conduct. I felt it would be in PASS' interest to establish a policy so we would be prepared should there be an incident.   "This is Community" Adopting a code of conduct would reinforce our community orientation and send a message about the positive character of the Summit. PASS is a leader among technical organizations for its promotion and support of women. Adopting a code of conduct would further demonstrate our leadership in this area. After researching similar polices from other organizations I published a first draft in April. I solicited feedback from the Board, HQ staff and some PASS members. Incorporating that feedback I presented version 4 at the May Board meeting, where we had a good discussion. You can read the meeting minutes for details. I incorporated points from  the Board discussion as well as feedback from a legal review to produce a final version which has been submitted to the Board. It will be discussed at the Board meeting July 12. You can read the full text at the end of this post. Virtual Chapters In the first quarter we started ramping up marketing support for the Virtual Chapters. Since then each edition of the Connector has highlighted a different VC to help get out the message about the variety of eductional opporutnities that are offered. These VC profiles will continue in the coming months. I was very pleased to welcome the new DBA Fundamentals VC which is geared toward new DBAs, people who are considering entering the field and those transitioning from a different IT role. Thanks to the contributions of Erin Stellato, Michelle Nalliah and Karla Landrum we published a "Virtual Chapter Guidebook". This document includes great advice on how to build and promote a VC. It's also a reference for how things work, from budgets to webinar hosting. I think this document will be extremely valuable to all our VC leaders and am grateful to those who put it together. Board Meeting/SQL Rally The Board met in May in Dallas. Among the items discussed were Global Growth, the budget, future events and the upcoming elections. We covered a lot of ground in two days and I will again refer you to the meeting minutes for details. The meeting schedule allowed us to participate in the SQL Rally networking events and one full day of the conference. I enjoyed having the opportunity to meet and talk with many PASS members. And my hat is off to the SQL Rally organizers who put on an outstanding event. Global Growth PASS has undertaken a major intitiative to reach and engage SQL Server professionals around the world. This Global Growth plan is ambitious and will have a significant impact on the strategic direction of the organization. We have been reaching out to the community for feedback, including hosting Twitter chats and live Town Hall meetings. I co-hosted two of these events and appreciated hearing the different perspectives of the people who participated If you have not done so I encourage you to read about the Global Growth vision and proposed governance changes  and submit your feedback. FY13 Budget July 1 is the beginning of PASS' fiscal year, which makes the end of June the deadline for approving a budget. Each director submits a budget for his or her portfolio. For the Virtual Chapter portfolio I focused on how we can allocate resources to grow the VCs. Budgeting is a give-and-take process, and while I didn't get everything I asked for I'm pleased the FY13 budget includes a significant increase in financial support for the Virtual Chapters. Many people put a lot of work into the budget, but no two people deserve credit more than VP of Finance Douglas McDowell and Accounting Manager Sandy Cherry. Thanks to both of them for getting us across the goal line on time. SQL Saturday I attended SQL Saturdays in Orange Co. CA and Phoenix. It's always inspiring to see the enthusiasm in the community for learning and networking. These events are successful due to the hard work of many volunteers. Thanks to the organizers in both cities for all your efforts. Next Up This quarter we'll be gearing up plans for the VCs at the Summit and exploring ways the VCs can best support PASS' Global Growth work. I'll also be wrapping up work on the Code of Conduct and attending a Board meeting in September. And I will be at SQL Saturday #144 in Sacramento later this month. Here is the language of the Code of Conduct I have submitted to the Board for consideration: PASS Code of Conduct The PASS Summit provides database professionals from a variety of backgrounds with an opportunity to connect, share and learn.  We value the strong sense of community that characterizes this event and we seek to foster an inclusive, professional atmosphere. We are dedicated to providing a harassment-free conference experience for everyone, regardless of gender, race, sexual orientation, disability, physical appearance, religion or any other protected classification.  Everyone at the Summit is expected to follow the Code of Conduct. This includes but is not limited to: PASS Staff, Exhibitors, Speakers, Attendees and anyone affiliated with the event. Participants are expected to follow the Code of Conduct at all Summit events, including PASS-sponsored social events. Participant behavior Harassment includes, but is not limited to, offensive verbal comments related to gender, race, sexual orientation, disability, physical appearance, religion, or any other protected classification.  Intimidation, threats, stalking, harassing photography or recording, sustained disruption of talks or other events, inappropriate physical contact and unwelcome attention will also be considered harassment. Similarly, sexual, racist, derogatory, threatening or other inappropriate language and imagery are not appropriate for any conference venue, including sessions.  Recourse If a participant engages in any conduct that is prohibited under this Code of Conduct, the conference organizers may take any action they deem appropriate, including warning the offender or expelling the offender from the conference. No refunds will be granted to attendees expelled from the Summit due to violations of the Code of Conduct. If you are being harassed, witness harassment, or have any other concerns, please contact a member of conference staff immediately. Conference staff can be identified by their “Headquarters/Staff” shirts and are trained to handle the situation appropriately. A Code of Conduct Committee (CCC) made up of the Executive Manager and three members of the Board of Directors designated by the President will be authorized to take action in response to an incident or behavior that violates the Code of Conduct.

  Read the article

• Yahoo is sending our server's transactional email to the Spam folder, even though we have set up SPF and DKIM

  - by Derrick Miller

  Yahoo Mail is sending our server's transactional emails to the Spam folder, even though we have taken quite a few anti-spam steps. By contrast, Gmail allows the messages through to the inbox just fine. Here are the things which are in place: SPF is set up for the domain holsteinplaza.com. Yahoo reports spf=pass in the message headers. DKIM is set up for the domain holsteinplaza.com. Yahoo reports dkim=pass in the message headers. We have a proper reverse DNS entry for the sending mail server. Name - IP matches IP - Name. Neither Domainkeys nor SenderID are set up. From what I can tell, DKIM is the way of the future, and there is not much to be gained from adding Domainkeys or SenderID. Following are the headers. Any ideas what more I should do to get Yahoo to stop flagging the emails as spam? From Holstein Plaza Auctions Sat Jun 25 18:30:08 2011 X-Apparently-To: [email protected] via 98.138.90.132; Sat, 25 Jun 2011 18:30:11 -0700 Return-Path: <[email protected]> X-YahooFilteredBulk: 70.32.113.42 Received-SPF: pass (domain of holsteinplaza.com designates 70.32.113.42 as permitted sender) X-YMailISG: i_vaA_QWLDuLOmXhDjUv3aBKJl5Un6EiP6Yk2m4yn3jeEuYK MkhpqIt9zDUbHARCwXrhl9pqjTANurGVca7gytSs.mryWVQcbWBx.DaItWRb VcyrIzwMzXKCSeu06H2a.cJ7HG5vJLJaKmHUUI_1ttXKn_Aegiu5yHvFX83R Lpth0witO9zfaKvOMaJV3LAxpIpFOydwvq1cqjZ8nURxQbxM3Cl.QW7MxxrC 09qLVn_D_xSdU94QdU22IsVmlaRHv.uU5dnIazu.KSkhKpYykDoZA2SH0SY4 JmTZj3LP8N926xXVDzYQ5K6QvKuJL5g0d9pYZx3KC59sgIu5oHlJ3Q15RdKb f3OJw0PR6oIyJ2yStVr8vfbDgOfj3qig03.Tw6g6MMNpv1G7Cuol4oJeUaYP xELxX6dHgBgCSuWMcbsrxbK4BIXcS2qhpMqYQ4Isk.XXyA8uvmFXyvgc1ds5 8jo0rW.Wsw.55Z.KTPaQ0gHXj0T3OGppYMELSJv1iuhPyyAnZpmq01CU0Qd5 CcRgdyW3HaqhmpXqJCS0Clo16zXA4HmAjR0tgIQrHRLc3D9N02AOzvmDgCb1 vCh0p00QeKVq8UNkcShPRxZFKi9khtkLhPBlXEKkhJ76zyDmHUxTY.dQHVVD 8D2hx7BxbqI9DINI8x5oR5Q8hYkZqHYQsmGNkaU77O2BnsEv5WxMEmzrBJ4Z h8zGCidgYPiZycZfnfaBp0Xb4tya2WMTN45W02JFcO1qq_UMJ9xPeqZhPEj. j9YvBAC8324GGF.c8eWcNB2VB34QHgTcVUl3.c0XUCuncls9Cyg4L7AoIdCi HvAklSzDDu9nW6732VEipV9FJ_JkDupDNQU2hfiPG.3OeF8GwTnVYnEn0EiZ aO0NCnZhXuLDcN3K7ml3846yRdASvzPFs9s4aJkzR0FkhVvptiMBEOdRkKdG wHWmvWpK4GTZpW4yU7CnKpW2MiWWn1MP0h_CCZFKs5.3mfmfPjPVIABN_RuU Q8ex5hdKnKlQiqK56LzcPRnYmNtrwdsUX9CYn9d6cPpXR_Bi5jrNJMNzdFvq lGO0CBT4QPe2V45U8PtpMitttuDA1cCvmyBPFswxNlL0jyX0a_W.vl0YW5.d HhDItpHhDxKRUscM28IR.exetq4QCzyM X-Originating-IP: [70.32.113.42] Authentication-Results: mta1267.mail.ac4.yahoo.com from=holsteinplaza.com; domainkeys=neutral (no sig); from=holsteinplaza.com; dkim=pass (ok) Received: from 127.0.0.1 (EHLO predator.axis80.com) (70.32.113.42) by mta1267.mail.ac4.yahoo.com with SMTP; Sat, 25 Jun 2011 18:30:11 -0700 Received: (qmail 1440 invoked by uid 48); 25 Jun 2011 21:30:09 -0400 To: [email protected] Subject: this is a test X-PHPMAILER-DKIM: phpmailer.worxware.com DKIM-Signature: v=1; a=rsa-sha1; q=dns/txt; l=203; s=auction; t=1309051808; c=relaxed/simple; h=From:To:Subject; d=holsteinplaza.com; [email protected]; z=From:=20Holstein=20Plaza=20Auctions=20<[email protected]> |To:[email protected] |Subject:=20this=20is=20a=20test; bh=B3Tw5AQb1va627KEoazuFEBZ0fg=; b=oQ5uFq+oekPTGhszyIritjuuIAi3qPNyeitu+aWMhdx3oC6O2j5hJsDFpK0sS5fms7QdnBkBcEzT0iekEvn9EfAdCkGZ2KrtEC0yv7QKQcrjXxy07GJpj9nq0LYbgOuPdw8mGvKxlRZ+jFBX0DRJm0xXFLkr+MEaILw7adHTCCM= Date: Sat, 25 Jun 2011 21:30:08 -0400 From: Holstein Plaza Auctions <[email protected]> Reply-to: Holstein Plaza Auctions <[email protected]> Message-ID: <[email protected]> X-Priority: 3 X-Mailer: PHPMailer 5.1 (phpmailer.sourceforge.net) MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="iso-8859-1" Content-Length: 195

  Read the article

• First PC Build (Part 1)

  - by Anthony Trudeau

  Originally posted on: http://geekswithblogs.net/tonyt/archive/2014/08/05/157959.aspxA couple of months ago I made the decision to build myself a new computer. The intended use is gaming and for using the last real version of Photoshop. I was motivated by the poor state of console gaming and a simple desire to do something I haven’t done before – build a PC from the ground up. I’ve been using PCs for more than two decades. I’ve replaced a component hear and there, but for the last 10 years or so I’ve only used laptops. Therefore, this article will be written from the perspective of someone familiar with PCs, but completely new at building. I’m not an expert and this is not a definitive guide for building a PC, but I do hope that it encourages you to try it yourself. Component List Research There was a lot of research necessary, because building a PC is completely new to me, and I haven’t kept up with what’s out there. The first thing you want to do is nail down what your goals are. Your goals are going to be driven by what you want to do with your computer and personal choice. Don’t neglect the second one, because if you’re doing this for fun you want to get what you want. In my case, I focused on three things: performance, longevity, and aesthetics. The performance aspect is important for gaming and Photoshop. This will drive what components you get. For example, heavy gaming use is going to drive your choice of graphics card. Longevity is relevant to me, because I don’t want to be changing things out anytime soon for the next hot game. The consequence of performance and longevity is cost. Finally, aesthetics was my next consideration. I could have just built a box, but it wouldn’t have been nearly as fun for me. Aesthetics might not be important to you. They are for me. I also like gadgets and that played into at least one purchase for this build. I used PC Part Picker to put together my component list. I found it invaluable during the process and I’d recommend it to everyone. One caveat is that I wouldn’t trust the compatibility aspects. It does a pretty good job of not steering you wrong, but do your own research. The rest of it isn’t really sexy. I started out with what appealed to me and then I made changes and additions as I dived deep into researching each component and interaction I could find. The resources I used are innumerable. I used reviews, product descriptions, forum posts (praises and problems), et al. to assist me. I also asked friends into gaming what they thought about my component list. And when I got near the end I posted my list to the Reddit /r/buildapc forum. I cannot stress the value of extra sets of eyeballs and first hand experiences. Some of the resources I used: PC Part Picker Tom’s Hardware bit-tech Reddit Purchase PC Part Picker favors certain vendors. You should look at others too. In my case I found their favorites to be the best. My priorities were out-the-door price and shipping time. I knew that once I started getting parts I’d want to start building. Luckily, I timed it well and everything arrived within the span of a few days. Here are my opinions on the vendors I ended up using in alphabetical order. Amazon.com is a good, reliable choice. They have excellent customer service in my experience, and I knew I wouldn’t have trouble with them. However, shipping time is often a problem when you use their free shipping unless you order expensive items (I’ve found items over $100 ship quickly). Ultimately though, price wasn’t always the best and their collection of sales tax in my state turned me off them. I did purchase my case from them. I ordered the mouse as well, but I cancelled after it was stuck four days in a “shipping soon” state. I purchased the mouse locally. Best Buy is not my favorite place to do business. There’s a lot of history with poor, uninterested sales representatives and they used to have a lot of bad anti-consumer policies. That’s a lot better now, but the bad taste is still in my mouth. I ended up purchasing the accessories from them including mouse (locally) and headphones. NCIX is a company that I’ve never heard of before. It popped up as a recommendation for my CPU cooler on PC Part Picker. I didn’t do a lot of research on the company, because their policy on you buying insurance for your orders turned me off. That policy makes it clear to me that the company finds me responsible for the shipment once it leaves their dock. That’s not right, and may run afoul of state laws. Regardless they shipped my CPU cooler quickly and I didn’t have a problem. NewEgg.com is a well known company. I had never done business with them, but I’m glad I did. They shipped quickly and provided good visibility over everything. The prices were also the best in most cases. My main complaint is that they have a lot of exchange only return policies on components. To their credit those policies are listed in the cart underneath each item. The visibility tells me that they’re not playing any shenanigans and made me comfortable dealing with that risk. The vast majority of what I ordered came from them. Coming Next In the next part I’ll tackle my build experience.

  Read the article

• VPS 512 MB RAM with WordPressMU comes to consumes lots of memory

  - by CAPitalZ

  I have googled for days and gathered all optimization suggestions and tried. My sites are not getting any high hits. May be like 100 hits per day [all my sites combined]. Here are my specs I have 512 MB RAM VPS with burstable 1024 MB. Centos 5 32-bit & cPanel/WHM Apache 2.2 MySQL 5.0 PHP 5.3.2 Here is my Configs I have 2 WordPressMU production sites, and 1 test site my.cnf # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /var/lib/mysql/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] port = 3306 socket = /var/lib/mysql/mysql.sock skip-locking skip-bdb skip-innodb key_buffer = 16M max_allowed_packet = 1M table_cache = 64 sort_buffer_size = 512K net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M #CAPitalZ thread_cache_size=8 thread_concurrency=4 #query_cache_type=1 #query_cache_limit=1M query_cache_size=16M concurrent_insert=2 low_priority_updates=1 max_connections=50 tmp_table_size=16M max_heap_table_size=16M join_buffer_size=1M interactive_timeout=25 wait_timeout=1000 #connect_timout=10 not able to restart mysql max_connect_errors=10 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # skip-networking # Disable Federated by default skip-federated # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 [mysqld_safe] open_files_limit=8192 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [isamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [myisamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout httpd.conf I have unselected many modules and recompiled using EasyApache in WHM. Only have the following modules built Deflate Expires Fileprotect Imagemap MPM Prefork Version [default] EAccelerator for PHP Bcmath Calendar CurlSSL [I'm using Curl. But I don't have any https sites] Expat GD [for image cropping] Gettext Imap Mbregex [default] Mbstring [need both Mbregex and Mbstring for utf-8] Mysql of the system MySQL "Improved" extension. Sockets TTF (FreeType) [I'm using custom font] Zlib Under Global Configuration I only have FollowSymLinks enabled I Have TraceEnable, ServerSignature, FileETag OFF ServerTokens ProductOnly DirectoryIndex Priority has index.php as the first one I have removed Clamd [Clam Anti-virus] SpamAssasin is Off Under Tweak Settings Default catch-all/default address behavior for new accounts. This is set to "fail" All stats programs turned off I have eAccelerator installed and checked in phpinfo and its working [Pre VirtualHost Include under WHM] Timeout 20 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 3 MinSpareServers 1 MaxSpareServers 3 StartServers 1 ServerLimit 50 MaxClients 50 MaxRequestsPerChild 4000 ExtendedStatus Off #ServerType standalone this throws error HostnameLookups Off <Directory "/"> AllowOverride None </Directory> My sites will take ages to load and WHM/CPanel will not even load. adadaa.com/ http://adadaa.net/ kadais.ca/ My average memory consumption is like 1000 MB! [yes always bursting] The process that consumes most CPU and also most memory is mysql But I also get like 15 httpd processes [when its bursting] I already got warning from cpuwatchcheck saying "While processing, the cpu has been maxed out for more than a 6 hour period. The current load/uptime line on the server at the time of this email is 07:00:37 up 11:30, 0 users, load average: 14.64, 16.79, 20.07" I don't know, I have tried switching these config values many different times, but nothing seems to work. Please show some light... Thanks

  Read the article

• Hoster not fulfilling contract: how to get money back?

  - by plua

  For several years, we have as a small webdesign company rented a dedicated server at a large hosting provider. They had several support levels. When we signed up for this, we had very limited in-house knowledge about server maintenance, and were very worried about the security of our server. We therefore took one of the more expensive support packages. An important aspect in this were these claims: [PROVIDER] verifies the availability of the latest security updates and sends you a notification to see if you are interested to have them installed [PROVIDER] verifies the availability of the latest supported software updates and sends you a notification to see if you are interested to have them installed These items were clearly stated on their website as being part of the advantage of this package.; With not enough knowledge about installing and updating such software on a Linux server, we decided to go for this package. We paid a premium of $50 per month over the maintenance package that is next in line ($100 vs $50). Over the years, we have paid several thousand dollars for this service. Then came the moment that I learned more and more about server management. And I found out step by step that our server was horrendously outdated! We had an OS that was hardly updated, our anti-virus was not working because it needed certain more recent packages on the OS, and in general there were a whole bunch of security vulnerabilities and fixes that were lacking. Shocked, I wrote the provider. Turns out, they decided unilaterally that they would not send out any notifications to clients because clients would get too many e-mails. This is a quote from their explanation: [...] We have decided not to spam its clients with OS and security updates and only install them whenever asked by the client I was shocked! They had never mentioned that they would drop this service, and in fact the claims about updating their clients through e-mail was still on their website, after they apparently stopped doing this years ago! Upon finding this out, I requested they refund all that we have paid as a premium over the other package, and make it available as future credit with their own company. I thought this was a very reasonable request. However, they said they would only go back one year and provide credit for this one year. Mails went back and forth, but they were not willing to give credit for the whole period, which I felt I was entitled to. So ultimately I left the hosting company, and filed a complaint with the BBB a while ago. Now, I am not the kind of person who runs to a lawyer for any minor thing, but in this case I am really considering taking action. I have been paying for years for a service I did not receive (the premium package had a few other pluses, but we took it primarily for these two points, and I can prove that we did not use the other benefits). For our small company the hosting costs were a very large part of our budget, and I feel it is very unfair how this large provider just does not care about not fulfilling its obligations. So my question is: what action should I take? Is a lawyer the only next step, or are there other suggestions? And am I right here to claim this money, or are they right that there is some sort of statue of limitations on such claims? Any feedback is appreciated.

  Read the article

• How to model a relationship that NHibernate (or Hibernate) doesn’t easily support

  - by MylesRip

  I have a situation in which the ideal relationship, I believe, would involve Value Object Inheritance. This is unfortunately not supported in NHibernate so any solution I come up with will be less than perfect. Let’s say that: “Item” entities have a “Location” that can be in one of multiple different formats. These formats are completely different with no overlapping fields. We will deal with each Location in the format that is provided in the data with no attempt to convert from one format to another. Each Item has exactly one Location. “SpecialItem” is a subtype of Item, however, that is unique in that it has exactly two Locations. “Group” entities aggregate Items. “LocationGroup” is as subtype of Group. LocationGroup also has a single Location that can be in any of the formats as described above. Although I’m interested in Items by Group, I’m also interested in being able to find all items with the same Location, regardless of which group they are in. I apologize for the number of stipulations listed above, but I’m afraid that simplifying it any further wouldn’t really reflect the difficulties of the situation. Here is how the above could be diagrammed: Mapping Dilemma Diagram: (http://www.freeimagehosting.net/uploads/592ad48b1a.jpg) (I tried placing the diagram inline, but Stack Overflow won't allow that until I have accumulated more points. I understand the reasoning behind it, but it is a bit inconvenient for now.) Hmmm... Apparently I can't have multiple links either. :-( Analyzing the above, I make the following observations: I treat Locations polymorphically, referring to the supertype rather than the subtype. Logically, Locations should be “Value Objects” rather than entities since it is meaningless to differentiate between two Location objects that have all the same values. Thus equality between Locations should be based on field comparisons, not identifiers. Also, value objects should be immutable and shared references should not be allowed. Using NHibernate (or Hibernate) one would typically map value objects using the “component” keyword which would cause the fields of the class to be mapped directly into the database table that represents the containing class. Put another way, there would not be a separate “Locations” table in the database (and Locations would therefore have no identifiers). NHibernate (or Hibernate) do not currently support inheritance for value objects. My choices as I see them are: Ignore the fact that Locations should be value objects and map them as entities. This would take care of the inheritance mapping issues since NHibernate supports entity inheritance. The downside is that I then have to deal with aliasing issues. (Meaning that if multiple objects share a reference to the same Location, then changing values for one object’s Location would cause the location to change for other objects that share the reference the same Location record.) I want to avoid this if possible. Another downside is that entities are typically compared by their IDs. This would mean that two Location objects would be considered not equal even if the values of all their fields are the same. This would be invalid and unacceptable from the business perspective. Flatten Locations into a single class so that there are no longer inheritance relationships for Locations. This would allow Locations to be treated as value objects which could easily be handled by using “component” mapping in NHibernate. The downside in this case would be that the domain model becomes weaker, more fragile and less maintainable. Do some “creative” mapping in the hbm files in order to force Location fields to be mapped into the containing entities’ tables without using the “component” keyword. This approach is described by Colin Jack here. My situation is more complicated than the one he describes due to the fact that SpecialItem has a second Location and the fact that a different entity, LocatedGroup, also has Locations. I could probably get it to work, but the mappings would be non-intuitive and therefore hard to understand and maintain by other developers in the future. Also, I suspect that these tricky mappings would likely not be possible using Fluent NHibernate so I would use the advantages of using that tool, at least in that situation. Surely others out there have run into similar situations. I’m hoping someone who has “been there, done that” can share some wisdom. :-) So here’s the question… Which approach should be preferred in this situation? Why?

  Read the article

• IIS Strategies for Accessing Secured Network Resources

  - by ErikE

  Problem: A user connects to a service on a machine, such as an IIS web site or a SQL Server database. The site or the database need to gain access to network resources such as file shares (the most common) or a database on a different server. Permission is denied. This is because the user the service is running under doesn't have network permissions in the first place, or if it does, it doesn't have rights to access the remote resource. I keep running into this problem over and over again and am tired of not having a really solid way of handling it. Here are some workarounds I'm aware of: Run IIS as a custom-created domain user who is granted high permissions If permissions are granted one file share at a time, then every time I want to read from a new share, I would have to ask a network admin to add it for me. Eventually, with many web sites reading from many shares, it is going to get really complicated. If permissions are just opened up wide for the user to access any file shares in our domain, then this seems like an unnecessary security surface area to present. This also applies to all the sites running on IIS, rather than just the selected site or virtual directory that needs the access, a further surface area problem. Still use the IUSR account but give it network permissions and set up the same user name on the remote resource (not a domain user, a local user) This also has its problems. For example, there's a file share I am using that I have full rights to for sharing, but I can't log in to the machine. So I have to find the right admin and ask him to do it for me. Any time something has to change, it's another request to an admin. Allow IIS users to connect as anonymous, but set the account used for anonymous access to a high-privilege one This is even worse than giving the IIS IUSR full privileges, because it means my web site can't use any kind of security in the first place. Connect using Kerberos, then delegate This sounds good in principle but has all sorts of problems. First of all, if you're using virtual web sites where the domain name you connect to the site with is not the base machine name (as we do frequently), then you have to set up a Service Principal Name on the webserver using Microsoft's SetSPN utility. It's complicated and apparently prone to errors. Also, you have to ask your network/domain admin to change security policy for both the web server and the domain account so they are "trusted for delegation." If you don't get everything perfectly right, suddenly your intended Kerberos authentication is NTLM instead, and you can only impersonate rather than delegate, and thus no reaching out over the network as the user. Also, this method can be problematic because sometimes you need the web site or database to have permissions that the connecting user doesn't have. Create a service or COM+ application that fetches the resource for the web site Services and COM+ packages are run with their own set of credentials. Running as a high-privilege user is okay since they can do their own security and deny requests that are not legitimate, putting control in the hands of the application developer instead of the network admin. Problems: I am using a COM+ package that does exactly this on Windows Server 2000 to deliver highly sensitive images to a secured web application. I tried moving the web site to Windows Server 2003 and was suddenly denied permission to instantiate the COM+ object, very likely registry permissions. I trolled around quite a bit and did not solve the problem, partly because I was reluctant to give the IUSR account full registry permissions. That seems like the same bad practice as just running IIS as a high-privilege user. Note: This is actually really simple. In a programming language of your choice, you create a class with a function that returns an instance of the object you want (an ADODB.Connection, for example), and build a dll, which you register as a COM+ object. In your web server-side code, you create an instance of the class and use the function, and since it is running under a different security context, calls to network resources work. Map drive letters to shares This could theoretically work, but in my mind it's not really a good long-term strategy. Even though mappings can be created with specific credentials, and this can be done by others than a network admin, this also is going to mean that there are either way too many shared drives (small granularity) or too much permission is granted to entire file servers (large granularity). Also, I haven't figured out how to map a drive so that the IUSR gets the drives. Mapping a drive is for the current user, I don't know the IUSR account password to log in as it and create the mappings. Move the resources local to the web server/database There are times when I've done this, especially with Access databases. Does the database have to live out on the file share? Sometimes, it was just easiest to move the database to the web server or to the SQL database server (so the linked server to it would work). But I don't think this is a great all-around solution, either. And it won't work when the resource is a service rather than a file. Move the service to the final web server/database I suppose I could run a web server on my SQL Server database, so the web site can connect to it using impersonation and make me happy. But do we really want random extra web servers on our database servers just so this is possible? No. Virtual directories in IIS I know that virtual directories can help make remote resources look as though they are local, and this supports using custom credentials for each virtual directory. I haven't been able to come up with, yet, how this would solve the problem for system calls. Users could reach file shares directly, but this won't help, say, classic ASP code access resources. I could use a URL instead of a file path to read remote data files in a web page, but this isn't going to help me make a connection to an Access database, a SQL server database, or any other resource that uses a connection library rather than being able to just read all the bytes and work with them. I wish there was some kind of "service tunnel" that I could create. Think about how a VPN makes remote resources look like they are local. With a richer aliasing mechanism, perhaps code-based, why couldn't even database connections occur under a defined security context? Why not a special Windows component that lets you specify, per user, what resources are available and what alternate credentials are used for the connection? File shares, databases, web sites, you name it. I guess I'm almost talking about a specialized local proxy server. Anyway, so there's my list. I may update it if I think of more. Does anyone have any ideas for me? My current problem today is, yet again, I need a web site to connect to an Access database on a file share. Here we go again...

  Read the article

• IIS Strategies for Accessing Secured Network Resources

  - by Emtucifor

  Problem: A user connects to a service on a machine, such as an IIS web site or a SQL Server database. The site or the database need to gain access to network resources such as file shares (the most common) or a database on a different server. Permission is denied. This is because the user the service is running as doesn't have network permissions in the first place, or if it does, it doesn't have rights to access the remote resource. I keep running into this problem over and over again and am tired of not having a really solid way of handling it. Here are some workarounds I'm aware of: Run IIS as a custom-created domain user who is granted high permissions If permissions are granted one file share at a time, then every time I want to read from a new share, I would have to ask a network admin to add it for me. Eventually, with many web sites reading from many shares, it is going to get really complicated. If permissions are just opened up wide for the user to access any file shares in our domain, then this seems like an unnecessary security surface area to present. This also applies to all the sites running on IIS, rather than just the selected site or virtual directory that needs the access, a further surface area problem. Still use the IUSR account but give it network permissions and set up the same user name on the remote resource (not a domain user, a local user) This also has its problems. For example, there's a file share I am using that I have full rights to for sharing, but I can't log in to the machine. So I have to find the right admin and ask him to do it for me. Any time something has to change, it's another request to an admin. Allow IIS users to connect as anonymous, but set the account used for anonymous access to a high-privilege one This is even worse than giving the IIS IUSR full privileges, because it means my web site can't use any kind of security in the first place. Connect using Kerberos, then delegate This sounds good in principle but has all sorts of problems. First of all, if you're using virtual web sites where the domain name you connect to the site with is not the base machine name (as we do frequently), then you have to set up a Service Principal Name on the webserver using Microsoft's SetSPN utility. It's complicated and apparently prone to errors. Also, you have to ask your network/domain admin to change security policy for the web server so it is "trusted for delegation." If you don't get everything perfectly right, suddenly your intended Kerberos authentication is NTLM instead, and you can only impersonate rather than delegate, and thus no reaching out over the network as the user. Also, this method can be problematic because sometimes you need the web site or database to have permissions that the connecting user doesn't have. Create a service or COM+ application that fetches the resource for the web site Services and COM+ packages are run with their own set of credentials. Running as a high-privilege user is okay since they can do their own security and deny requests that are not legitimate, putting control in the hands of the application developer instead of the network admin. Problems: I am using a COM+ package that does exactly this on Windows Server 2000 to deliver highly sensitive images to a secured web application. I tried moving the web site to Windows Server 2003 and was suddenly denied permission to instantiate the COM+ object, very likely registry permissions. I trolled around quite a bit and did not solve the problem, partly because I was reluctant to give the IUSR account full registry permissions. That seems like the same bad practice as just running IIS as a high-privilege user. Note: This is actually really simple. In a programming language of your choice, you create a class with a function that returns an instance of the object you want (an ADODB.Connection, for example), and build a dll, which you register as a COM+ object. In your web server-side code, you create an instance of the class and use the function, and since it is running under a different security context, calls to network resources work. Map drive letters to shares This could theoretically work, but in my mind it's not really a good long-term strategy. Even though mappings can be created with specific credentials, and this can be done by others than a network admin, this also is going to mean that there are either way too many shared drives (small granularity) or too much permission is granted to entire file servers (large granularity). Also, I haven't figured out how to map a drive so that the IUSR gets the drives. Mapping a drive is for the current user, I don't know the IUSR account password to log in as it and create the mappings. Move the resources local to the web server/database There are times when I've done this, especially with Access databases. Does the database have to live out on the file share? Sometimes, it was just easiest to move the database to the web server or to the SQL database server (so the linked server to it would work). But I don't think this is a great all-around solution, either. And it won't work when the resource is a service rather than a file. Move the service to the final web server/database I suppose I could run a web server on my SQL Server database, so the web site can connect to it using impersonation and make me happy. But do we really want random extra web servers on our database servers just so this is possible? No. Virtual directories in IIS I know that virtual directories can help make remote resources look as though they are local, and this supports using custom credentials for each virtual directory. I haven't been able to come up with, yet, how this would solve the problem for system calls. Users could reach file shares directly, but this won't help, say, classic ASP code access resources. I could use a URL instead of a file path to read remote data files in a web page, but this isn't going to help me make a connection to an Access database, a SQL server database, or any other resource that uses a connection library rather than being able to just read all the bytes and work with them. I wish there was some kind of "service tunnel" that I could create. Think about how a VPN makes remote resources look like they are local. With a richer aliasing mechanism, perhaps code-based, why couldn't even database connections occur under a defined security context? Why not a special Windows component that lets you specify, per user, what resources are available and what alternate credentials are used for the connection? File shares, databases, web sites, you name it. I guess I'm almost talking about a specialized local proxy server. Anyway, so there's my list. I may update it if I think of more. Does anyone have any ideas for me? My current problem today is, yet again, I need a web site to connect to an Access database on a file share. Here we go again...

  Read the article

• OpenVPN Error : TLS Error: local/remote TLS keys are out of sync: [AF_INET]

  - by Lucidity

  Fist off thanks for reading this, I appreciate any and all suggestions. I am having some serious problems reconnecting to my OpenVPN client using Riseup.net's VPN. I have spent a few days banging my head against the wall in attempts to set this up on my iOS devices....but that is a whole other issue. I was however able to set it up on my Mac OS X specifically on my Windows Vista 32 bit BootCamp VM with relatively little trouble. To originally connect I only had to modify the recommended Config file very slightly (Config file included at the end of this post): - I had to enter the code directly into my config file - And change "dev tap" to "dev tun" So I was connected. (Note - I did test to ensure the VPN was actually working after I originally connected, it was. Also verified the .pem file (inserted as the coding in my config file) for authenticity). I left the VPN running. My computer went to sleep. Today I went to use the internet expecting (possibly incorrectly - I am now unsure if I was wrong to leave it running) to still be connected to the VPN. However I saw immediately I was not. I went to reconnect. And was (am) unable to. My logs after attempting to connect (and getting a connection failed dialog box) show everything working as it should (as far as I can tell) until the end where I get the following lines: Mon Sep 23 21:07:49 2013 us=276809 Initialization Sequence Completed Mon Sep 23 21:07:49 2013 us=276809 MANAGEMENT: >STATE:1379995669,CONNECTED,SUCCESS, OMITTED Mon Sep 23 21:22:50 2013 us=390350 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 21:23:39 2013 us=862180 TLS Error: local/remote TLS keys are out of sync: [AF_INET] VPN IP OMITTED [2] Mon Sep 23 21:23:57 2013 us=395183 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 22:07:41 2013 us=296898 TLS: soft reset sec=0 bytes=513834601/0 pkts=708032/0 Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=1, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=Riseup Networks, [email protected] Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=0, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=vpn.riseup.net Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA So I have searched for a solution online and I have included what I have attempted below, however I fear (know) I am not knowledgeable enough in this area to fix this myself. I apologize in advance for my ignorance. I do tech support for a living, but not this kind of tech support unfortunately. Other notes and troubleshooting done - - Windows Firewall is disabled completely, as well as other Anti-virus programs - Tor is disabled completely - No Proxies running - Time is correct in all locations - Router Firmware is up to date - Able to connect to the internet and as far as I can tell all necessary ports are open. - No settings have been altered since I was able to connect successfully. - Ethernet as well as wifi connections attempted, resulted in same error. Also tried adding the following lines to my config file (without success or change in error): persist-key persist-tun proto tcp (after reading that this error generally occurs on UDP connections, and is extremely rare on TCP) resolv-retry infinite (thinking the connection may have timed out since the issues occurred after leaving VPN connected during about 10 hrs of computer in sleep mode) All attempts resulted in exact same error code included at the top of this post. The original suggestions I found online stated - (regarding the TLS Error) - This error should resolve itself within 60 seconds, or if not quit wait 120 seconds and try again. (Which isnt the case here...) (regarding the Out of Sync" error) - If you continue to get "out of sync" errors and the link does not come up, then it means that something is probably wrong with your config file. You must use either ping and ping-restart on both sides of the connection, or keepalive on the server side of a client/server connection, in order to gracefully recover from "local/remote TLS keys are out of sync" errors. I wouldn't be surprised if my config file is lacking, or not correct. However I can confirm I followed the instructions to a tee. And was able to connect originally (and have not modified my settings or config file since I was able to connect to when the error began occurring). I have a very simple config file: client dev tun tun-mtu 1500 remote vpn.riseup.net auth-user-pass ca RiseupCA.pem redirect-gateway verb 4 <ca> -----BEGIN CERTIFICATE----- [OMITTED] -----END CERTIFICATE----- </ca> I would really appreciate any help or suggestions. I am at a total loss here, I know I'm asking a lot here. Though I am a new user on this site I help others on many forums including Microsoft's support community and especially Apple's support communities, so I will definitely pass on anything I learn here to help others. Thanks so so so much in advance for reading this.

  Read the article

• Blocking a distributed, consistent spam attack? Could it be something more serious?

  - by mattmcmanus

  I will do my best to try and explain this as it's strange and confusing to me. I posted a little while ago about a sustained spike in mysql queries on a VPS I had recently setup. It turned out to be a single post on a site I was developmenting. The post had over 30,000 spam comments! Since the site was one I was slowly building I hadn't configured the anti-spam comment software yet. I've since deleted the particular post which has given the server a break but the post's url keeps on getting hit. The frustrating thing is every hit is from a different IP. How do I even start to block/prevent this? Is this even something I need to worry about? Here are some more specific details about my setup, just to give some context: Ubuntu 8.10 server with ufw setup The site I'm building is in Drupal which now has Mollom setup for spam control. It wasn't configured before. The requests happen inconsistently. Sometimes it's every couple seconds and other times it's a an or so between hits. However it's been going on pretty much constantly like that for over a week. Here is a sample of my apache access log from the last 15 minutes just for the page in question: dev.domain-name.com:80 97.87.97.169 - - [28/Mar/2010:06:47:40 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 202.149.24.193 - - [28/Mar/2010:06:50:37 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 193.106.92.77 - - [28/Mar/2010:06:50:39 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 194.85.136.187 - - [28/Mar/2010:06:52:03 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 220.255.7.13 - - [28/Mar/2010:06:52:14 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 195.70.55.151 - - [28/Mar/2010:06:53:41 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 71.91.4.31 - - [28/Mar/2010:06:56:07 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 98.209.203.170 - - [28/Mar/2010:06:56:10 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 24.255.137.159 - - [28/Mar/2010:06:56:19 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 77.242.20.18 - - [28/Mar/2010:07:00:15 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 94.75.215.42 - - [28/Mar/2010:07:01:34 +0000] "POST /comment/reply/3 HTTP/1.0" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 89.115.2.128 - - [28/Mar/2010:07:03:20 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 75.65.230.252 - - [28/Mar/2010:07:05:05 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 206.251.255.61 - - [28/Mar/2010:07:06:46 +0000] "POST /comment/reply/3 HTTP/1.0" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 213.194.120.14 - - [28/Mar/2010:07:07:22 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" I understand this is an open ended question, but any help or insight you could give would be much appreciated.

  Read the article

• Email sent from server with rDNS & SPF being blocked by Hotmail

  - by Canadaka

  I have been unable to send email to users on hotmail or other Microsoft email servers for some time. Its been a major headache trying to find out why and how to fix the issue. The emails being sent that are blocked from my domain canadaka.net. I use Google Aps to host my regular email serverice for my @canadaka.net email addresses. I can sent email from my desktop or gmail to a hotmail without any problem. But any email sent from my server on behalf of canadaka.net is blocked, not even arriving in the junk email. The IP that the emails are being sent from is the same IP that my site is hosted on: 66.199.162.177 This IP is new to me since August 2010, I had a different IP for the previous 3-4 years. This IP is not on any credible spam lists http://www.anti-abuse.org/multi-rbl-check-results/?host=66.199.162.177 The one list spamcannibal.org my IP is listed on seems to be out of my control, says "no reverse DNS, MX host should have rDNS - RFC1912 2.1". But since I use Google for my email hosting, I don't have control over setting up RDNS for all the MX records. I do have Reverse DNS setup for my IP though, it resolves to "mail.canadaka.net". I have signed up for SNDS and was approved. My ip says "All of the specified IPs have normal status." Sender Score: 100 https://www.senderscore.org/lookup.php?lookup=66.199.162.177&ipLookup.x=55&ipLookup.y=14 My Mcafee threat level seems fine I have a TXT SPF record setup, I am currently using xname.org as my DNS, and they don't have a field for SPF, but their FAQ says to add the SPF info as a TXT entry. v=spf1 a include:_spf.google.com ~all Some "SPF checking" tools ive used detect that my domain has a valid SPF, but others don't. Like Microsoft's SPF wizard, i think this is because its specifically looking for an SPF record and not in the TXT. "No SPF Record Found. A and MX Records Available". From my home I can run "nslookup -type=TXT canadaka.net" and it returns: Server: google-public-dns-a.google.com Address: 8.8.8.8 Non-authoritative answer: canadaka.net text = "v=spf1 a include:_spf.google.com ~all" One strange thing I found is i'm unable to ping hotmail.com or msn.com or do a "telnet mail.hotmail.com 25". I am able to ping gmail.com and many other domains I tried. I tried changing my DNS servers to Google's Public DNS and did a ipconfig /flushdns but that had no effect. I am however able to connect with telnet to mx1.hotmail.com This is what the email headers look like when I send to a Google email server and I receive the email with no troubles. You can see that SPF is passing. Delivered-To: [email protected] Received: by 10.146.168.12 with SMTP id q12cs91243yae; Sun, 27 Feb 2011 18:01:49 -0800 (PST) Received: by 10.43.48.7 with SMTP id uu7mr4292541icb.68.1298858509242; Sun, 27 Feb 2011 18:01:49 -0800 (PST) Return-Path: Received: from canadaka.net ([66.199.162.177]) by mx.google.com with ESMTP id uh9si8493137icb.127.2011.02.27.18.01.45; Sun, 27 Feb 2011 18:01:48 -0800 (PST) Received-SPF: pass (google.com: domain of [email protected] designates 66.199.162.177 as permitted sender) client-ip=66.199.162.177; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 66.199.162.177 as permitted sender) [email protected] Message-Id: <[email protected] Received: from coruscant ([127.0.0.1]:12907) by canadaka.net with [XMail 1.27 ESMTP Server] id for from ; Sun, 27 Feb 2011 18:01:29 -0800 Date: Sun, 27 Feb 2011 18:01:29 -0800 Subject: Test To: [email protected] From: XXXX Reply-To: [email protected] X-Mailer: PHP/5.2.13 I can send to gmail and other email services fine. I don't know what i'm doing wrong! UPDATE 1 I have been removed from hotmails IP block and am now able to send emails to hotmail, but they are all going directly to the JUNK folder. UPDATE 2 I used Telnet to send a test message to port25.com, seems my SPF is not being detected. Result: neutral (SPF-Result: None) canadaka.net. SPF (no records) canadaka.net. TXT (no records) I do have a TXT record, its been there for years, I did change it a week ago. Other sites that allow you to check your SPF detect it, but some others like Microsofts Wizard doesn't. This iw what my SPF record in my xname.org DNS file looks like: canadaka.net. 86400 IN TXT "v=spf1 a include:_spf.google.com ~all" I did have a nameserver as my 4th option that doens't have the TXT records since it doens't support it. So I removed it from the list and instead added wtfdns.com as my 4th adn 5th nameservers, which does support TXT.

  Read the article

• Java 7 update 6 installation fails on Windows 7 when Chrome is default browser

  - by ali1234

  I am configuring a brand new Lenovo U410 system with Windows 7 Home Premium for a user. I received the system direct from the shop. As part of the configuration I installed Java using the online installer. This worked correctly. Later, due to a mistake I made, I needed to restore the system to factory default. The factory default FORMATS C:\ and puts back (supposedly) the exact factory configuration. However, after doing this, I was no longer able to install Java successfully using the same method I used before. Now, whenever I attempt to use the online Java installer, the following happens. First of all, a window always appears "Welcome to Java", "Downloading Java Installer...". After short time this window disappears and then one of three things happens: The very first time I do this after doing a factory reset, I get a Windows error report, which contains this information: Application Name: JavaSetup7u5.exe Application Version: 7.0.50.6 Application Timestamp: 4feacd84 Fault Module Name: JavaIC.dll Fault Module Version: 9.9.9.9 Fault Module Timestamp: 4f2343d6 Exception Offset: 000052cb Exception Code: c0000417 Exception Data: 00000000 OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 1033 Additional Information 1: 773c Additional Information 2: 773cd78cf06816f8246f359fa270f3bb Additional Information 3: f51a Additional Information 4: f51aaea7d22f36fa9e3a626b5a5cd1c3 2. Subsequent runs produce either this error message: "Error: Java(TM) installer - Downloaded file C:\Users\\AppData\Local\Temp\fx-runtime.exe is corrupt." or Nothing happens at all. I Believe this is a red herring. Running the installer again causes a different error because the files were downloaded and the installer crashed before it could clean up. This isn't the actual problem, as when this happens the installer deletes the downloaded files, and then when you run it for the third time, it downloads everything again and does the javaic.dll crash. I suspect the downloader is appending to the existing files or something, causing the corruption. I have tried all of the above as Administrator and as a normal user. I have tried reseting the system to factory defaults several times. I have tried downloading with Chrome and Internet Explorer 9. I have tried uninstalling all anti-virus software and disabling the windows firewall entirely. The only thing which makes a difference is running the installer in Windows XP compatibility mode, which allows the installation to complete. I know I can workaround this error by using the offline installer so please don't post that as an answer. I am looking for an explanation of the root cause. Additionally, if I use the offline installer, the updater does not work. The updater also does not work if I install in XP mode. The updater fails because it works by just downloading the newest online setup and running it. Also remember that the installers are digitally signed. The signitures verify correctly so there is no way in hell that this is caused by corrupted downloads. Some theories I have: The Java setup files on java.com actually changed in between the first successful install and my later attempts. Seems unlikely as none of the version numbers have changed. However, I have seen a couple of reports of this error which showed up in the past 24 hours. This looks like the most likely explanation right now: http://www.oracle.com/us/corporate/press/1735645 - Oracle released 7 update 6 two days ago. Careful inspection of the installers reveal that they are in fact attempting to download .6, not .5 as the download page claims. Not actually correct. Only the update tool tries to install 7u6. The online installer still tries 7u5. However, 7u6 being released two days ago is too much of a coincidence to ignore. Update: The 7u6 online installer is available from Oracle technetwork. It crashes in exactly the same way. The factory reset software uses GMT-8 and I am on GMT-1. As a result, after factory reset, any software which cares to check would think that the system was restored 7 hours in the future, due to Window's awful policy of storing local time in the system clock. This could be confusing a certificate check or similar. Update: I discovered that this does cause Windows Update to fail. The workaround, setting the clock back before starting factory reset, does not enable Java to install correctly. The factory reset image isn't really the same as what is installed in the main partition when you buy the system. Naughty Lenovo. The installer appears to crash while installing or displaying something to do with the Ask.com toolbar. That seems to be what javaic.dll does. Microsoft Tuesday was the 14th. Some update in that could be causing this. However, I'm factory reseting the machine every time, so unless the patches get slipstreamed into the recovery image, or there is some mechanism by which they get silently installed even if updates are disabled, then I don't see how this can be the cause. Major breakthrough: The default browser on Lenovo systems is Google Chrome. I noticed that the JavaIC.dll "sponsor check" actually does a check on your default browser in order to decide which sponsor ad to display. Normally that would get you the Ask toolbar on IE9. But that toolbar doesn't work on Chrome, and so the installer tries to display a different ad. The different ad is what causes the crash. Changing the default browser to IE9 allows the installer to run correctly. So this looks like a genuine bug in the sponsor ad code in the installer, caused by a combination of Google Chrome default browser and not being in the US. (Installer also checks your location using IP geolocation service and displays different ads based on that.)

  Read the article

• Launching mysql server: same permissions for root and for user

  - by toinbis

  Hi folks, have been directed here from stackoverflow here, am reposting the question and adding my.cnf at the end of a post. so far in my 10+ years experience with linux, all the permission problems I've ever encountered, have been successfully solved with chmod -R 777 /path/where/the/problem/has/occured (every lie has a grain of truth in it :) This time the trick doesn't work, so I'm turning to you for help. I'm compiling mysql server from scratch with zc.buildout (www . buildout . org). I do launch it by executing /home/toinbis/.../parts/mysql/bin/mysqld_safe, this works. The thing is that i'll be launching this from within supervisor (supervisord . org) script, and when used on the deployment server, it'll need it to be launched with root permissions(so that nginx server, launched with the same script, would have access to 80 port). The problem is that sudo /home/toinbis/.../parts/mysql/bin/mysqld_safe, fails, generating the error, posted bellow, in mysql error log (apache and nginx works as expected). http://lists.mysql.com/mysql/216045 suggests, that "there are two errors: A missing table and a file system that mysqld doesn't have access to". Mysqldatadir and all the mysql server binary files has 777 permissions, talbe mysql.plugin does exist and has 777 permissions (why Can't open the mysql.plugin table?), "sudo touch mysql_datadir/tmp/file" does create file (why Can't create/write to file /home/toinbis/.../runtime/mysql_datadir/tmp/ib4e9Huz?). chgrp -R mysql mysql_datadir and adding "root, toinbis, mysql" users to mysql group ( cat /etc/group | grep mysql outputs mysql:x:124:root,toinbis,mysql) has no effect - when i launch it as a casual user, it starts, when as a root - it fails. Does mysql server, even started as root, tries to operate as other, let's say, 'mysql' user? but even in that case, adding mysql user to mysql group and making all the mysql_datadirs files belong to mysql group should make things work smoothly. I do know that it might be a better idea to simply to launch one the nginx as root and mysql - as just a user, but this error irritated me enough so to devote enough energy so not to only "make things work", but to also make things work exactly as i wanted it initially, so to have a proof of concept that it's possible. and this is the generated error: 091213 20:02:55 mysqld_safe Starting mysqld daemon with databases from /home/toinbis/.../runtime/mysql_datadir /home/toinbis/.../parts/mysql/libexec/mysqld: Table 'plugin' is read only 091213 20:02:55 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. /home/toinbis/.../parts/mysql/libexec/mysqld: Can't create/write to file '/home/toinbis/.../runtime/mysql_datadir/tmp/ib4e9Huz' (Errcode: 13) 091213 20:02:55 InnoDB: Error: unable to create temporary file; errno: 13 091213 20:02:55 [ERROR] Plugin 'InnoDB' init function returned error. 091213 20:02:55 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 091213 20:02:55 [ERROR] Can't start server : Bind on unix socket: Permission denied 091213 20:02:55 [ERROR] Do you already have another mysqld server running on socket: /home/toinbis/.../runtime/var/pids/mysql.sock ? 091213 20:02:55 [ERROR] Aborting 091213 20:02:55 [Note] /home/toinbis/.../parts/mysql/libexec/mysqld: Shutdown complete 091213 20:02:55 mysqld_safe mysqld from pid file /home/toinbis/.../runtime/var/pids/mysql.pid ended My my.cnf (the basedir and datadir(including tempdir) have chmod -R 777 permissions) : [client] socket = /home/toinbis/.../runtime/var/pids/mysql.sock port = 8002 [mysqld_safe] socket = /home/toinbis/.../runtime/var/pids/mysql.sock nice = 0 [mysqld] # # * Basic Settings # socket = /home/toinbis/.../runtime/var/pids/mysql.sock port = 8002 pid-file = /home/toinbis/.../runtime/var/pids/mysql.pid basedir = /home/toinbis/.../parts/mysql datadir = /home/toinbis/.../runtime/mysql_datadir tmpdir = /home/toinbis/.../runtime/mysql_datadir/tmp skip-external-locking bind-address = 127.0.0.1 log-error =/home/toinbis/.../runtime/logs/mysql_errorlog # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 32M thread_stack = 128K thread_cache_size = 8 myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /home/toinbis/.../runtime/logs/mysql_logs/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration #log_slow_queries = /home/toinbis/.../runtime/logs/mysql_logs/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. #server-id = 1 #log_bin = /home/toinbis/.../runtime/mysql_datadir/mysql-bin.log #binlog_format = ROW #read_only = 0 #expire_logs_days = 10 #max_binlog_size = 100M #sync_binlog = 1 #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # innodb_data_file_path = ibdata1:10M:autoextend innodb_buffer_pool_size=64M innodb_log_file_size=16M innodb_log_buffer_size=8M innodb_flush_log_at_trx_commit=1 innodb_file_per_table innodb_locks_unsafe_for_binlog=1 [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completion [isamchk] key_buffer = 16M Any ideas much appreciated! regards, to P.S. sorry for messy hyperlinks, it's my first post and anti-spam feature of SF doesn't allow to post them properly :)

  Read the article

• Need help identiying a nasty rootkit in Windows

  - by goofrider

  I have a nasty rootkit that not tools seem to be able to idenity. I know for sure it's a rootkit, but I can figure out which rootkit it is. Here's what I gathered so far: It creates multiple copies of itself in %HOME%\Local Settings\Temp with names like Q.EXE, IAJARZ.exe, etc., and install them as hidden services. These EXE have SysInternals identifiers in them so they're definitely rootkits. It hooked very deep in the system, including file read/write, security policies, registry read/write, and possibly WinSock/TCP/IP. When going to Sophos.com to download their software, the rootkit inject something called Microsoft Ajax Tootkit into the page, which injects code into the email submission form in order to redirect it. (EDIT: I might have panicked. Looks like Sophos does use an AJAZ email form, their form is just broken on Chrome so it looked like a mail form injection attack, the link is http://www.sophos.com/en-us/products/free-tools/virus-removal-tool/download.aspx ) Super-Antispyware found a lot of spyware cookies, in the name of .kaspersky.2o7.net, etc. (just chedk 2o7.net, looks like it's a legit ad company) I tried comparing DNS lookup from the infected systems and from system in other physical locations, no DNS redirections it seems. I used dd to copy the MBR and compared it with the MBR provided by ms-sys package, no differences so it's not infecting MBR. No antivirus or rootkit scanner be able to identify it. Most of them can't even find it. I tried scanning, in-situ (normal mode), in safe mode, and boot to linux live CD. Scanners used: Avast, Sophos anti rootkit, Kasersky TDSSKiller, GMER, RootkitRevealer, and many others. Kaspersky reported some unsigned system files that ought to be signed (e.g. tcpip.sys), and reported a number of MD5 mismatches. But otherwise couldn't identify anything based on signature. When running Sysinternal RootkitRevealer and Sophos AntiRootkit, CPU usage goes up to 100% and gets stucked. The Rootkit is blocking them. When trying running/installing HiJackThis, RootkitRevealer and some other scanners, it tells me system security policy prevent running/installing it. The list of malicious acitivities go on and on. here's a sample of logs from all my scans. In particular, aswSnx.SYS, apnenfno.sys and PROCMON20.SYS has a huge number of hooks. It's hard to tell if the rootkit replaced legit program files like aswSnx.SYS (from Avast) and PROCMON20.SYS (from Sysinternal Process Monitor). I can't find whether apnenfno.sys is from a legit program. Help to identify it is appreciated. Trend Micro RootkitBuster ------ [HIDDEN_REGISTRY][Hidden Reg Value]: KeyPath : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\sptd\Cfg Root : 586bfc0 SubKey : Cfg ValueName : g0 Data : 38 23 E8 D0 BF F2 2D 6F ... ValueType : 3 AccessType: 0 FullLength: 61 DataSize : 32 [HOOKED_SERVICE_API]: Service API : ZwCreateMutant Image Path : C:\WINDOWS\System32\Drivers\aswSnx.SYS OriginalHandler : 0x8061758e CurrentHandler : 0xaa66cce8 ServiceNumber : 0x2b ModuleName : aswSnx.SYS SDTType : 0x0 [HOOKED_SERVICE_API]: Service API : ZwCreateThread Image Path : c:\windows\system32\drivers\apnenfno.sys OriginalHandler : 0x805d1038 CurrentHandler : 0xaa5f118c ServiceNumber : 0x35 ModuleName : apnenfno.sys SDTType : 0x0 [HOOKED_SERVICE_API]: Service API : ZwDeleteKey Image Path : C:\WINDOWS\system32\Drivers\PROCMON20.SYS OriginalHandler : 0x80624472 CurrentHandler : 0xa709b0f8 ServiceNumber : 0x3f ModuleName : PROCMON20.SYS SDTType : 0x0 HiJackThis ------ O23 - Service: JWAHQAGZ - Sysinternals - www.sysinternals.com - C:\DOCUME~1\jeff\LOCALS~1\Temp\JWAHQAGZ.exe O23 - Service: LHIJ - Sysinternals - www.sysinternals.com - C:\DOCUME~1\jeff\LOCALS~1\Temp\LHIJ.exe Kaspersky TDSSKiller ------ 21:05:58.0375 3936 C:\WINDOWS\system32\ati2sgag.exe - copied to quarantine 21:05:59.0217 3936 ATI Smart ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:05:59.0342 3936 C:\WINDOWS\system32\BUFADPT.SYS - copied to quarantine 21:05:59.0856 3936 BUFADPT ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:05:59.0965 3936 C:\Program Files\CrashPlan\CrashPlanService.exe - copied to quarantine 21:06:00.0152 3936 CrashPlanService ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0246 3936 C:\WINDOWS\system32\epmntdrv.sys - copied to quarantine 21:06:00.0433 3936 epmntdrv ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0464 3936 C:\WINDOWS\system32\EuGdiDrv.sys - copied to quarantine 21:06:00.0526 3936 EuGdiDrv ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0604 3936 C:\Program Files\Common Files\Macrovision Shared\FLEXnet Publisher\FNPLicensingService.exe - copied to quarantine 21:06:01.0181 3936 FLEXnet Licensing Service ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0321 3936 C:\Program Files\AddinForUNCFAT\UNCFATDMS.exe - copied to quarantine 21:06:01.0430 3936 OTFSDMS ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0492 3936 C:\WINDOWS\system32\DRIVERS\tcpip.sys - copied to quarantine 21:06:01.0539 3936 Tcpip ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0601 3936 C:\DOCUME~1\jeff\LOCALS~1\Temp\TULPUWOX.exe - copied to quarantine 21:06:01.0664 3936 HKLM\SYSTEM\ControlSet003\services\TULPUWOX - will be deleted on reboot 21:06:01.0664 3936 C:\DOCUME~1\jeff\LOCALS~1\Temp\TULPUWOX.exe - will be deleted on reboot 21:06:01.0664 3936 TULPUWOX ( UnsignedFile.Multi.Generic ) - User select action: Delete 21:06:01.0757 3936 C:\WINDOWS\system32\Drivers\usbaapl.sys - copied to quarantine 21:06:01.0866 3936 USBAAPL ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0913 3936 C:\Program Files\VMware\VMware Player\vmware-authd.exe - copied to quarantine 21:06:02.0443 3936 VMAuthdService ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:02.0443 3936 vmount2 ( UnsignedFile.Multi.Generic ) - skipped by user 21:06:02.0443 3936 vmount2 ( UnsignedFile.Multi.Generic ) - User select action: Skip 21:06:02.0459 3936 vstor2 ( UnsignedFile.Multi.Generic ) - skipped by user 21:06:02.0459 3936 vstor2 ( UnsignedFile.Multi.Generic ) - User select action: Skip

  Read the article

• CodePlex Daily Summary for Saturday, February 27, 2010

  CodePlex Daily Summary for Saturday, February 27, 2010New ProjectsASP.NET MVC ScriptBehind: Dynamic, developer & designer friendly script inclusion, compression and optimization for ASP.NET MVCCSLib.Net: CSLib.Net (Common Solutions Library) is yet another library with commonly used utilities, helpers, extensions and etc.DNN Module - Google Analytic Dashboard: Here is a Google Analytic Dashboard DNN Module which contain following sub modules. * Visitors Overview * World Map Overlay * Traf...dotUML: dotUML is a toolkit that enables developers to create and visualize UML diagrams like sequence, use case or component diagrams. EventRegistration: Event Registration ProgramGameStore League Manager: GameStore League Manager makes it easier for gaming store managers to run local leagues for card games, board games and any game where there is a h...GibberIM: GibberIM (Gibberish IM) is yet another Jabber instant messanger implementation.HTTP Compression Library for Heavy Load Web Server: Deflater is a HTTP Compression Library, supporting Deflate (RFC 1950, RFC 1951) and GZip (RFC 1952). It is designed to encode and compress HTML con...HydroLiDAR: This is a research project intended to explore algorithms and techniques for extracting Hydrographic features (rivers, watersheds, ponds, pits, etc...Lan Party Manager: Lan Party ManagerMAPS SQL Analysis Project: This solution demonstrates how to build a Business Intelligence solution on top of the MAPS databaseMMDB Parallax ALM: An open source Application Lifecycle Management (ALM) system, being built by Mike Mooney of MMDB Solutions, as a learning/teaching exercise. MyColorSprite: This Silverlight app is a color selection tool especially great for creating gredient color brushes for the xaml code. It allows a user create/pic...PDF Form Bubble Up: Bubble Up takes PDF Forms stored in SharePoint document libraries and "bubbles up" the data in the PDF Form to the library. This means the data tha...PostBack Blog Engine: A modified Oxite open-source blog engine on top of the DB4O object database engine.Project Otto: A Silverlight Isometric Rendering Engine and Demo GameQFrac: Fraktalų generatorius parašytas naudojant Qt karkasą.RapidIoC: RapidIoC provides lightning fast IoC capabilities including Dependency Injection & AOP. The modular framework will allow for constructor, property,...Shatranj: A WPF / Silverlight based frontend to Huo Chess. This project was conceived as a way to learn key WPF / Silverlight concepts. At the release, it...WHS SkyDrive Backup Add In: This project allows for Windows Home Server to backup selected folders to your free 25GB Live SkyDrive. Simply dump the Home Server Add In, into y...Workflow Type Browser for WF4: This Workflow Type Browser displays type information for all arguments and variables in a WF4 workflow. It is designed for use in a rehosted desig...ZoomBarPlus: Windows Mobile Service designed for the HTC Touch Pro 2. Adds additional functionality to the zoom bar at the bottom of the screen. You can map key...New ReleasesBCryptTool: BCryptTool v0.2: The Microsoft .NET Framework 3.5 (SP1) is needed to run this program.Braintree Client Library: Braintree-1.1.1: Braintree-1.1.1CC.Utilities: CC.Utilities 1.0.10.226: Minor bug fixes. A few new functions in the Interop namespace. DoubleBufferedGraphics now exposes the underlying memory Image through the Mem...CC.Votd: CC.Votd 1.0.10.227: This release includes several bug fixes and enchancements. The most notable enhancement is the RssItemCache which will allow the screensaver to f...DNN Module - Google Analytic Dashboard: DNN Module - Google Analytic Dashboard: Here is a Google Analytic Dashboard DNN Module which contain following sub modules. * Visitors Overview * World Map Overlay * Traffic ...Extend SmallBasic: Teaching Extensions v.008: Fixed Message Box to appear in front as expected. Added ColorWheel.getRandomColor() Including Recipes and Concept slides as part of releaseFolderSize: FolderSize.Win32.1.0.5.0: FolderSize.Win32.1.0.5.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts 3.0.4 beta Released: Hi, Today we are releasing the much awaited Zooming feature. In this version of Zooming you will be able to zoom/scale the PlotArea of the chart. ...GameStore League Manager: League Manager 1.0: Rough and ready first version. You will need to have SQL Server Express 2005 or 2008 installed on your machine to use this software. Unzip to a l...Google Maps API 3 Visual Studio Intellisense: google-maps-3-vs-1-0-vsdoc: google-maps-3-vs-1-0 provides Visual Studio intellisense in-line api documentation and code completion for Google Maps API V3. Updated 02/25/10 A...HaoRan_WebCam: HaoRan.WebCam.Web beta2: 在年前发布的那一版基于silverlight4(beta)版的摄像头应用之后。经过最近一段时间的完善。目前已推出了beta2版，在修改了原有程序bug的基础上，做了如下变化： 1.将图片载入修改成为按原图宽高比进行缩放，所以以前沿X,Y轴变化就变成了一个缩放条同比例变化了。 ...IQToolkit Contrib: IQToolkitContrib.zip (v1.0.17.1): Update to DataServiceClientRepository - added ExecuteNonEntity to deal with calling Wcf Data Service methods for Dto classes (opposed to Entity cla...kdar: KDAR 0.0.15: KDAR - Kernel Debugger Anti Rootkit - new module cheks added - bugs fixedLogJoint - Log Viewer: logjoint 1.5: - Added support for more formats - Timeline improvement - Unicode logs and encodings supportMyColorSprite: MyColorSprite: MyColorSprite This Silverlight app is a color selection tool especially great for creating gredient color brushes for the xaml code. It allows a ...OAuthLib: OAuthLib (1.6.0.1): Difference between 1.6.0.0 is just version number.Picasa Downloader: PicasaDownloader Setup (41085): Changelog: Fixed workitem 10296 (Saving at resolutions above 1600px), Added experimental support for a modifier of the image download url (inse...Prolog.NET: Prolog.NET 1.0 Beta 1.1: Installer includes: primary Prolog.NET assembly Prolog.NET Workbench PrologTest console application all required dependencies Beta 1.1 in...QFrac: QFrac 1.0: Pirmoji stabili QFrac versija.SharepointApplicationFramework: SAF QuickPoll: Release Notes: This web part is written in VS2010 beta2 and uses Microsoft Chart Controls. Packaged into a single WSP. This wsp creates a quick po...Star System Simulator: Star System Simulator 2.2: An minor update to Version 2.1. Changes in this release: User interface enhancements/fixes with toolbar and icons. Features in this release: Mod...ToDoListReminder: Version 1.0.1.0: Bugs fixed: 10316, 10317 Handler for "Window Closing" event was added Error handling for XML parsing was addedVCC: Latest build, v2.1.30226.0: Automatic drop of latest buildWindows Remote Assistance For Skype: Beta 1.0.1: Major changes: 1) Now using Skype4COM to interact with Skype 2) InvitationXML is compressed 3) Showing warning on first run to Allow Access to SkypeWorkflow Type Browser for WF4: Release 1.0: There has been much surprise and disappointment expressed by the WF4 developer community since Microsoft made it clear that Intellisense woould not...Most Popular ProjectsData Dictionary CreatorOutlook 2007 Messaging API (MAPI) Code SamplesCommon Data Parameters ModuleTeam System - Work Item Spell Checker (All Languages)Tyrannt Online (Client/Server RPG)Ray Tracer StarterMeeting DemoNick BerardiScreenslayerRawrMost Active ProjectsDinnerNow.netRawrBlogEngine.NETMapWindow GISSLARToolkit - Silverlight Augmented Reality ToolkitInfoServiceSharpMap - Geospatial Application Framework for the CLRCommon Context Adapterspatterns & practices – Enterprise LibraryNB_Store - Free DotNetNuke Ecommerce Catalog Module

  Read the article

• ASP.NET Web Forms Extensibility: Providers

  - by Ricardo Peres

  Introduction This will be the first of a number of posts on ASP.NET extensibility. At this moment I don’t know exactly how many will be and I only know a couple of subjects that I want to talk about, so more will come in the next days. I have the sensation that the providers offered by ASP.NET are not widely know, although everyone uses, for example, sessions, they may not be aware of the extensibility points that Microsoft included. This post won’t go into details of how to configure and extend each of the providers, but will hopefully give some pointers on that direction. Canonical These are the most widely known and used providers, coming from ASP.NET 1, chances are, you have used them already. Good support for invoking client side, either from a .NET application or from JavaScript. Lots of server-side controls use them, such as the Login control for example. Membership The Membership provider is responsible for managing registered users, including creating new ones, authenticating them, changing passwords, etc. ASP.NET comes with two implementations, one that uses a SQL Server database and another that uses the Active Directory. The base class is Membership and new providers are registered on the membership section on the Web.config file, as well as parameters for specifying minimum password lengths, complexities, maximum age, etc. One reason for creating a custom provider would be, for example, storing membership information in a different database engine. 1: <membership defaultProvider="MyProvider"> 2: <providers> 3: <add name="MyProvider" type="MyClass, MyAssembly"/> 4: </providers> 5: </membership> Role The Role provider assigns roles to authenticated users. The base class is Role and there are three out of the box implementations: XML-based, SQL Server and Windows-based. Also registered on Web.config through the roleManager section, where you can also say if your roles should be cached on a cookie. If you want your roles to come from a different place, implement a custom provider. 1: <roleManager defaultProvider="MyProvider"> 2: <providers> 3: <add name="MyProvider" type="MyClass, MyAssembly" /> 4: </providers> 5: </roleManager> Profile The Profile provider allows defining a set of properties that will be tied and made available to authenticated or even anonymous ones, which must be tracked by using anonymous authentication. The base class is Profile and the only included implementation stores these settings in a SQL Server database. Configured through profile section, where you also specify the properties to make available, a custom provider would allow storing these properties in different locations. 1: <profile defaultProvider="MyProvider"> 2: <providers> 3: <add name="MyProvider" type="MyClass, MyAssembly"/> 4: </providers> 5: </profile> Basic OK, I didn’t know what to call these, so Basic is probably as good as a name as anything else. Not supported client-side (doesn’t even make sense). Session The Session provider allows storing data tied to the current “session”, which is normally created when a user first accesses the site, even when it is not yet authenticated, and remains all the way. The base class and only included implementation is SessionStateStoreProviderBase and it is capable of storing data in one of three locations: In the process memory (default, not suitable for web farms or increased reliability); A SQL Server database (best for reliability and clustering); The ASP.NET State Service, which is a Windows Service that is installed with the .NET Framework (ok for clustering). The configuration is made through the sessionState section. By adding a custom Session provider, you can store the data in different locations – think for example of a distributed cache. 1: <sessionState customProvider=”MyProvider”> 2: <providers> 3: <add name=”MyProvider” type=”MyClass, MyAssembly” /> 4: </providers> 5: </sessionState> Resource A not so known provider, allows you to change the origin of localized resource elements. By default, these come from RESX files and are used whenever you use the Resources expression builder or the GetGlobalResourceObject and GetLocalResourceObject methods, but if you implement a custom provider, you can have these elements come from some place else, such as a database. The base class is ResourceProviderFactory and there’s only one internal implementation which uses these RESX files. Configuration is through the globalization section. 1: <globalization resourceProviderFactoryType="MyClass, MyAssembly" /> Health Monitoring Health Monitoring is also probably not so well known, and actually not a good name for it. First, in order to understand what it does, you have to know that ASP.NET fires “events” at specific times and when specific things happen, such as when logging in, an exception is raised. These are not user interface events and you can create your own and fire them, nothing will happen, but the Health Monitoring provider will detect it. You can configure it to do things when certain conditions are met, such as a number of events being fired in a certain amount of time. You define these rules and route them to a specific provider, which must inherit from WebEventProvider. Out of the box implementations include sending mails, logging to a SQL Server database, writing to the Windows Event Log, Windows Management Instrumentation, the IIS 7 Trace infrastructure or the debugger Trace. Its configuration is achieved by the healthMonitoring section and a reason for implementing a custom provider would be, for example, locking down a web application in the event of a significant number of failed login attempts occurring in a small period of time. 1: <healthMonitoring> 2: <providers> 3: <add name="MyProvider" type="MyClass, MyAssembly"/> 4: </providers> 5: </healthMonitoring> Sitemap The Sitemap provider allows defining the site’s navigation structure and associated required permissions for each node, in a tree-like fashion. Usually this is statically defined, and the included provider allows it, by supplying this structure in a Web.sitemap XML file. The base class is SiteMapProvider and you can extend it in order to supply you own source for the site’s structure, which may even be dynamic. Its configuration must be done through the siteMap section. 1: <siteMap defaultProvider="MyProvider"> 2: <providers><add name="MyProvider" type="MyClass, MyAssembly" /> 3: </providers> 4: </siteMap> Web Part Personalization Web Parts are better known by SharePoint users, but since ASP.NET 2.0 they are included in the core Framework. Web Parts are server-side controls that offer certain possibilities of configuration by clients visiting the page where they are located. The infrastructure handles this configuration per user or globally for all users and this provider is responsible for just that. The base class is PersonalizationProvider and the only included implementation stores settings on SQL Server. Add new providers through the personalization section. 1: <webParts> 2: <personalization defaultProvider="MyProvider"> 3: <providers> 4: <add name="MyProvider" type="MyClass, MyAssembly"/> 5: </providers> 6: </personalization> 7: </webParts> Build The Build provider is responsible for compiling whatever files are present on your web folder. There’s a base class, BuildProvider, and, as can be expected, internal implementations for building pages (ASPX), master pages (Master), user web controls (ASCX), handlers (ASHX), themes (Skin), XML Schemas (XSD), web services (ASMX, SVC), resources (RESX), browser capabilities files (Browser) and so on. You would write a build provider if you wanted to generate code from any kind of non-code file so that you have strong typing at development time. Configuration goes on the buildProviders section and it is per extension. 1: <buildProviders> 2: <add extension=".ext" type="MyClass, MyAssembly” /> 3: </buildProviders> New in ASP.NET 4 Not exactly new since they exist since 2010, but in ASP.NET terms, still new. Output Cache The Output Cache for ASPX pages and ASCX user controls is now extensible, through the Output Cache provider, which means you can implement a custom mechanism for storing and retrieving cached data, for example, in a distributed fashion. The base class is OutputCacheProvider and the only implementation is private. Configuration goes on the outputCache section and on each page and web user control you can choose the provider you want to use. 1: <caching> 2: <outputCache defaultProvider="MyProvider"> 3: <providers> 4: <add name="MyProvider" type="MyClass, MyAssembly"/> 5: </providers> 6: </outputCache> 7: </caching> Request Validation A big change introduced in ASP.NET 4 (and refined in 4.5, by the way) is the introduction of extensible request validation, by means of a Request Validation provider. This means we are not limited to either enabling or disabling event validation for all pages or for a specific page, but we now have fine control over each of the elements of the request, including cookies, headers, query string and form values. The base provider class is RequestValidator and the configuration goes on the httpRuntime section. 1: <httpRuntime requestValidationType="MyClass, MyAssembly" /> Browser Capabilities The Browser Capabilities provider is new in ASP.NET 4, although the concept exists from ASP.NET 2. The idea is to map a browser brand and version to its supported capabilities, such as JavaScript version, Flash support, ActiveX support, and so on. Previously, this was all hardcoded in .Browser files located in %WINDIR%\Microsoft.NET\Framework(64)\vXXXXX\Config\Browsers, but now you can have a class inherit from HttpCapabilitiesProvider and implement your own mechanism. Register in on the browserCaps section. 1: <browserCaps provider="MyClass, MyAssembly" /> Encoder The Encoder provider is responsible for encoding every string that is sent to the browser on a page or header. This includes for example converting special characters for their standard codes and is implemented by the base class HttpEncoder. Another implementation takes care of Anti Cross Site Scripting (XSS) attacks. Build your own by inheriting from one of these classes if you want to add some additional processing to these strings. The configuration will go on the httpRuntime section. 1: <httpRuntime encoderType="MyClass, MyAssembly" /> Conclusion That’s about it for ASP.NET providers. It was by no means a thorough description, but I hope I managed to raise your interest on this subject. There are lots of pointers on the Internet, so I only included direct references to the Framework classes and configuration sections. Stay tuned for more extensibility!

  Read the article

• CodePlex Daily Summary for Wednesday, March 10, 2010

  CodePlex Daily Summary for Wednesday, March 10, 2010New ProjectsASP.NET jQuery MessageBox: The ASP.NET jQuery it's an Web User Control that uses jQuery framework to enable diferent ways to present information to the user, by using these ...CommentRemover: Utility for removing comments from source codes. Support PL/SQL, Delphi, C/C#/C++ Developed in C# Requirement Microsoft .NET Framework 3.5DotNetNuke® RadMenu: DNNRadMenu makes it easy to create skins which use telerik RadMenu functionality. Licensing permits anyone (including designers) to use the compon...DotNetNuke® Skin AlphaBrisk: A DotNetNuke Design Challenge skin package submitted to the "Web Standards" category by dnnskin.net. Eight themes using transparent png, div, CSS, ...DotNetNuke® Skin Collaborate: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Cuong Dang of R2Integrated. This package is 100% XHTML an...DotNetNuke® Skin TR: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by Tracy Wittenkeller of T-Worx. This package is 100% XHTML, ...Encrypted Notes: Encrypted Notes is similar to Notes, but uses Triple DES to encrypt text and files. It has a random key generator, and can save the key. It is deve...FalconLobby: FalconLobby is an authorized AddOn for Falcon 4.0 Allied Force which was created to support the multiplayer experience. FalconLobby retrieves the l...INETA Europe WebSite: Website for INETA EuropeInsert a Favorite (Bookmark) plugin for Windows Live Writer: This Windows Live Writer plugin allows you to select a Favorite (Bookmark) and insert it into your blog entry.Javascript Lib: an javascript libraryjqGrid ASP.Net MVC Control: A fully integrated ASP.Net MVC (2.0) grid control based on the successfull jqGrid plugin for the jQuery jscript framework. Among the features of...Mosaictor: Mosaictor is a per project of mine that I started halfway my education. It is a photo mosaic creator using locally saved files and files obtained t...Notes: Notes is a simple but fast text editor. It can save in many text formats, and includes many features, such as templates (soon to be customizable), ...notmuchweb: A web frontend for notmuchPervasiveID: The PID is actively involved in Open Source ID community-building and education. PID members frequently travel the world to attend ID conferences a...Proyect Electronica: Proyecto de electronicaRapidshare Downloader 2: Rapidshare Downloader 2ROAD is Rapid Oberon Application Development: A suite of integrated tools for the develpment of Oberon-2 applicationSDNTFSIntegration: TFS Integration.SilverlightImageUpload: SilverlightImageUploadSMIL - SharePoint Map Integration Layer: .Useful SharePoint Site Workflow Utilities: This project aims to make it easy use SharePoint 2010's Site Workflows as "event handlers" for various back end systems by providing ways to start ...Windows Media Autorization: Windows Media Autorizaton PlugIn for windows media 9 WinMo Twitter Widget StarterKit: This project will allow you to quickly create Widgets that run on a Windows Mobile 6.5 phone to allow you to view Tweets designated by a hash tag. ...XNA 3D World Studio Content Pipeline: XNA 3D World Studio Content Pipeline New ReleasesAPSales - CRM Software as a Service: APSales 0.1.2: This version add some interesting features to the project: Implements a Grid Control Custom View Query Use lastest version(2.0.2) of APEnnead.net ...ASP.NET jQuery MessageBox: ASP.NET jQuery MessageBox 0.1: Project Description The ASP.NET jQuery it's an Web User Control que uses jQuery framework to enable diferent ways to present information to the use...BTP Tools: CSBC+CUVC+HCSBC.dict files 2010-03-09: a space character should be only between <Strong Number Pattern> and <Count> like: <Text><Strong Number pattern><space character> <Count> The abov...Citrix HDX MediaStream for Flash System Verifier: HDX Flash Verifier Beta (v1.20): Reduced the number of exceptions that terminate the verification process.Code examples, utilities and misc from Lars Wilhelmsen [MVP]: LarsW.MexEdmxFixer 1.5: Added some missing sub elements from the EDMX file's Designer element; Connection and Output. Without them, some of the properties in the designer ...CommonLibrary.NET: CommonLibrary.NET 0.9.4 - Beta 2: A collection of very reusable code and components in C# 3.5 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars,...Encrypted Notes: Source Code: This has the all the code for Encrypted Notes in a Text file.Hybrid Windows Service: Release Assembly: Main Assembly. Usage: 1. Add reference to this dll in your 'Windows Service' project. 2. Replace references to ServiceBase to HybridServiceBase in...jqGrid ASP.Net MVC Control: Version 1.0.0.0: Initial Versionkdar: KDAR 0.0.16: KDAR - Kernel Debugger Anti Rootkit - KINTERRUPT object check added - load image notifier check addedlatex2mathml: 1.0 alpha: This is the first public release of Latex2MathML. Lots are left to add and fix. I encourage you to test it. If something goes wrong, send me the lo...MapWindow GIS: MapWindow 6.0 msi (March 9): This fixes a bug with saving and opening maps.Microsoft Research Biology Extension for Excel: MSR Biology Extension for Excel - Beta 2 (Update): This is an updated release for the Beta 2 Installer for the MSR Biology Extension for Excel. A couple of identified issues with the installation f...Notes: Notes 5.2: This is the latest version of Notes (5.2). It has an installer - it will create a directory 'CPascoe' in My Documents. Once you have extracted the...Notes: Source Code: This has the all the code for Notes in a Text file.RedBulb for XNA Framework: Tree Massacre XMAS Edition (Sample): Tree Massacre XMAS Edition Source Code and Creators Club Package http://bayimg.com/image/jalkiaacb.jpgRoTwee: RoTwee (7.0.2.0): Now color mode is introduced to RoTwee. Push change color button and you can change color mode of RoTwee. Recommended mode is active rainbow mode :)SharePoint Team-Mailer: SharePoint Team-Mailer v1.0: Recommended versionsPWadmin: pwAdmin v0.7_nightly: Nightly Build --------------------- + Target JRE -> 1.5.0_21 + Target ApplicationServer -> Apache Tomcat 5.5.28 + Added xml editor (only working fo...SQL Server PowerShell Extensions: 2.1 Production: Release 2.1 re-implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 9 modules with 133 advanced functions, 2 cmdlets and 7 scri...TMap for VS2010: TMap for VS2010 (MSF Agile) RC Release: Release of the TMap process template for VS2010 combined with the MSF Agile process template basd on the Release Candidate. The references to the g...TS3QueryLib.Net: TS3QueryLib.Net Version 0.19.14.0: Changelog Added property "IsClientRecording" to class "ClientListEntry" which is used in method "GetClientList" of QueryRunner class. (Change of Be...VCC: Latest build, v2.1.30309.0: Automatic drop of latest buildWinMo Twitter Widget StarterKit: Tweet Viewer Files: Files necessary to create your own Tweet ViewerWPF AutoComplete TextBox Control: Version 1.1: This release includes accumulated bug fixes since the initial release. Besides, adds experimental asynchronous support. Sample application gets...XNA 3D World Studio Content Pipeline: XNA 3DWS Content Pipeline: This is an rar file containing the latest content importer codeMost Popular ProjectsMetaSharpWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesASP.NET Ajax LibraryMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsjQuery Library for SharePoint Web ServicesBlogEngine.NETN2 CMSFasterflect - A Fast and Simple Reflection APIFarseer Physics Enginepatterns & practices – Enterprise LibraryCaliburn: An Application Framework for WPF and Silverlight

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49  | Next Page >