Search Results

Search found 21250 results on 850 pages for 'client certificates'.

Page 46/850 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• Unable to access local network when Cisco VPN client is connected

  - by bryanroth

  I'm a developer and don't have much networking expertise, so bear with me. I'm using the Cisco VPN Client 5.0.02.0090 to connect to my work's VPN that way I can RDP into my work computer. Once connected, I can't ping anything on the local network once connected to the VPN thus I am unable to access my work's network. This used to work about two weeks ago but abruptly stopped working today. However, I have the Cisco VPN Client installed on my laptop and I am able to ping and RDP into my work computer from there. Both my desktop and laptop computers are connected to the same router at home. I have tried the following so far: Rebooted my computer Reinstalled VPN client Updated NIC drivers Disabled firewall Opened up ports 500, 4500, and 10000 Any help would be much appreciated. Thanks!

  Read the article

• sqlcmd won't execute - Claims Native Client not installed properly

  - by nuit9

  I'm trying to use sqlcmd to execute some SQL scripts. Using a test command with a simple query like: sqlcmd -S HOSTNAME -d MYDATABASE -Q 'SELECT Names FROM Customers' sqlcmd does not appear to make any attempt to connect to the server as it displays this message: Sqlcmd: Error: Connection failure. SQL Native Client is not installed correctly. To correct this, run SQL Server Setup. The native client was presumably installed as part of the SQL Server setup and likely correctly. I actually get this message on any machine with SQL server installed trying to use sqlcmd so it's not a matter of the installation being corrupt. Unfortunately the message really tells me nothing about the problem so I don't know what the real issue is. I know the SQL Native client is working properly since a vbscript was able to execute SQL queries against the database. Is there some additional configuration needed to use sqlcmd?

  Read the article

• Accessing DHCP Client's vendor-encapsulated-options

  - by Jason Owen

  In the dhcpd.conf file for isc-dhcpd-V3.1.1, I have set up a vendor options space and defined several different options. I am able to use those definitions to send options from the server to the client in the vendor-encapsulated-options option (code 43). However, the client is also sending vendor options back to the server, in the same way, and I'd like to respond differently depending on the type and contents of the options. As far as I can tell, the the server isn't parsing the client's vendor-encapsulated-options at all - the option operator is just returning null. Is there a way to get the server to populate the options in the vendor space I've defined?

  Read the article

• Synergy: server refused client

  - by Tom

  I am trying to get Synergy up and running from a new Windows 7 computer, to an XP computer. The Synergy installations seemed to go fine. I configured each to start on start-up, which they seem to, but the client won't connect. I get repeated: "server refused client with our name" messages in the log output. The Synergy FAQ says to "Add the client to the server's configuration file." But I can't seem to find an instruction set on how to do this. I've looked and looked, but I'm lost...

  Read the article

• When Citrix desktop disconnects SAP Client holds session and can't log back in

  - by Stradas

  We have a fairly large Citrix implementation and have just pushed out SAP desktop client to all of the desktops. Everything else is working fine except the following problem: If a user Disconnects their session and the session is running the SAP client, (logging off works fine) the user can not reconnect and log back in. We have a script on the server that terminates the session as a work around. We can see on the server that it is the SAP client that is holding on and running. This is at a large office, but the SAP servers are in another hemisphere. As is the custom Citrix says its SAP and SAP says it is Citrix. I don't like using a powershell script as a substitute for a system configuration solution.

  Read the article

• OpenVPN not with Windows 7 PCs on client Lan

  - by Rohan

  I have a setup with a router running OpenWRT with an openvpn client. Windows 7 pc's cannot access the vpn. They time out trying to access servers on the VPN. The mystery to me is that the setup works fine for my laptop running ubuntu. I can access the VPN without any issues. I previously had a router running Tomato with the same openvpn setup and all the computers could access the VPN. What could account for the difference in behaviour? Is there something I am missing in the OpenWRT setup that is required for windows networking that is on by default with tomato? To clarify the OpenVPN client is on the OpenWRT router. The client connects to the OpenVPN server. But when I try to access the VPN from Windows computers on my network I cannot.

  Read the article

• Win 2008 r2 -- client and server are both behind a NAT

  - by Mike Dehari

  I am new to win2008. Have Win2008 R2 installed. Need to know how a client system (Win7), using remote desktop, terminal server, or whatever windows 2008 provides to connect to it (as a user or an admin). Both the client (Win7) and the server (win2008) are inside a NAT (with 192.168......... addresses). Both have real internet addresses (they are in different cities 173.64.......). How can I use the internet from the client (Win7) to connect to the server (Win2008). On both systems, I have "allowed other systems to connect". I am familiar with tcp/ip, ports......etc.

  Read the article

• Failed pinging a LAN card of the server from the client using shared internet connection

  - by bobo

  The server (Windows XP Pro SP3) has two LAN cards (LAN card A and B) and is connected to the internet using ADSL. The ADSL connection is shared to LAN card B using Internet Connection Sharing. The client (Windows XP Pro SP3) has one LAN card, and is connected to LAN card B of the server so that it has access to the internet. The IP address on the LAN cards are defined as follows: Server: LAN card A: 192.168.0.3/24 (manually defined by me) LAN card B: 192.168.0.1/24 (manually defined by Internet Connection Sharing) Client: LAN card: 192.168.0.123/24 (assigned by DHCP) Default gateway: 192.168.0.1 From the server, I can ping 192.168.0.123 successfully. From the client, it can access the internet without any problem. I can also ping 192.168.0.1 successfully but for 192.168.0.3, it failed with the Request Timeout error message. Why did the ping fail, and what should be done to make the ping possible? (all firewalls have been turned off.)

  Read the article

• Ruby, Rails & MySQL parity between Mac Client (10.6) & XServe (10.5)

  - by Meltemi

  We're setting up a RoR setup with Development on Mac OS X Client (10.6.3) and then using a Mac OS X Server (10.5.8) for testing and eventually deployment. I'd like to get as many systems in sync on these machines as possible. Wondering if there are any pitfalls. I seem to understand what's necessary under Client but Server has some hardwired stuff that I want to make sure doesn't break...or is updated correctly. Currently installed on both machines we have: OS X Client (10.6.3): Ruby 1.8.7 Rails 2.3.5 MySQL (not installed yet) OS X Server (10.5.8): Ruby 1.8.6 Rails 2.3.5 MySQL Ver 14.12 Distrib 5.0.82 Any suggestions...Ideally from someone who's done this on Leopard Server as well but I'll listen to general tips & proceedures

  Read the article

• Route all traffic via OpenVPN client

  - by Ilya

  I've got OpenVPN client running on 192.168.0.3. What I'd like to do is route all the traffic from the second computer with 192.168.0.100 via OpenVPN client that's running on the first computer. My router ip is 192.168.0.1 Network topology: Computer with OpenVPN client: 192.168.0.3 Computer that has to be rerouted: 192.168.0.100 Router: 192.168.0.1 I want it to work in the following way: 192.168.0.100 computer => 192.168.0.3 computer => OpenVPN => 192.168.0.1 How can I achieve that by only modifying windows' routing table? I've tried the following, which didn't work (it just dropped my internet connection): route delete 0.0.0.0 mask 255.255.255.255 192.168.0.1 route add 0.0.0.0 mask 255.255.255.255 192.168.0.100 Thanks!

  Read the article

• unable to receiving emails to my client.

  - by Karthik Malla

  Hello, I created my own mail server client my domain name is www.softmail.me from this mail client I can able to send emails to any email provider but I cannot receive any emails back. I hosted my client at http://beta.softmail.me do I need to apply settings of a sub domain or domain settings are enough. Kindly check my dns settings and reply me. my DNS details are A (Host) host = @ points = 65.75.241.26 host = beta points = 65.75.241.26 host = accs points = 65.75.241.26 host = mail points = 65.75.241.26 host = stable points = 65.75.241.26 CNAME (Alias) host = imap points = mail host = pop points = mail host = smtp points = mail host = www points = @ MX (Mail Exchange) priority = 10 host = mail points = @ Please verify the above settings and tell me why I am unable to receive emails back from other email providers.

  Read the article

• Shrew VPN Client gives default route- changing the policy stops me from accessing VPN network

  - by Lock

  I am using the shrew client to connect to what I believe is a Netscreen VPN. Now, when connected, the client adds the VPN as the default route. I do not want this- there is only 1 network behind the VPN that I need to access. I found that with the shrew client, you can change the "Policy" settings on the connection, and can add your own networks in that should tunnel over the VPN. I do this, and add my network in, but when I connect the VPN, I get nothing. Can't access the network. Any idea why this would be? I can see my network in the routing table, and its correctly pointing to the correct gateway. A traceroute shows all time-outs, so I can't be 100% sure that it is trying to tunnel over the VPN. Any idea how I can troubleshoot this?

  Read the article

• Allow VMWare client to connect only via VPN

  - by Frank Meulenaar

  I have a VMWare (currently using Workstation on Vista, but thinking about switching to ESX) client with Windows XP. I've installed OpenVPN in the client and it connects to the corporate VPN server. I want to make sure that all traffic from the Windows XP machine goes trough this VPN tunnel, but I can't change any settings on the corporate VPN server. Is it possible to restrict the internet connectivity of the Windows XP client in such a way that it can only send packets to the IP of the corporate VPN server? In that way it'd be impossible for packets to bypass the tunnel. I've looked at NAT configurations but couldn't see how I could make this setup.

  Read the article

• Enabling the telnet client for all Windows 7 PCs on a domain

  - by ICTdesk.net

  The telnet client is disabled by default in Windows 7. I would like to enable the telnet client for all Windows 7 PCs in our domain. I know how to enable it manually: Start Control Panel Programs And Features Turn Windows features on or off Check Telnet Client Hit OK How can I do this for all Windows 7 PCs in the domain? All the Windows 7 PCs are in a separate OU. Can this be enabled by a registry setting that I can apply to all Windows 7 PCs? Can it be done by a Group Policy?

  Read the article

• Port forwarding through a client bridge

  - by Gabe Tanenhaus

  I am having a problem with port forwarding with a client bridge. My main router is a 2wire router from AT&T using their firmware. It is a Router/Modem. In my room, there is a Linksys WRT54GL with DD-WRT on it. I have set up the DD-WRT one as a Client bridge for my PC. I can access the internet on my computer using it but when I try and port forward, the ports stay closed. I am port forwarding on my main router (2wire) and it doesn't work. I have checked online and all I see is that I should only need to forward on the main router since the client bridge has NAT disabled, but it seems to not work that way. Any ideas?

  Read the article

• Client-based program to track response time for online webservice

  - by Søren Haagerup

  I am helping a customer with general IT support, and they have a problem with a hosted web-based system being slow. The provider of the system blames the client's computer, and the client calls me for help. I blame the provider, but it is hard to get them to do something about it without rock-solid evidence. And every time the provider comes around for a TeamViewer session, everything of course runs smoothly. Does there exist a client program or browser plugin that tracks statistics about response time for specific web services?

  Read the article

• IIS web service responds on server, not from remote client

  - by Aharon Manne

  I have installed a web service on a server running IIS (v6, as far as I can tell). There is another service installed, which responds as expected. My service responds correctly when a browser is pointed to localhost, but there is no response when a remote client tries to query the service. Fiddler on the remote client simply reports a timeout. Wireshark on the remote client shows no response at all from the server, no NACK, nothing. Wireshark on the server detects no query at the relevant port (the service is installed on port 8080). There are no relevant entries in the event viewer. Obviously there is some issue of permissions or authentication. I have tried to compare my service to the service that works, but I have not been able to locate relevant parameters. Any help would be greatly appreciated.

  Read the article

• How to to specify network address for a dhcp client

  - by drecute

  I have setup and configured a DHCP server on a sparc running Solaris 10. Now I want to test the DHCP server by creating a DHCP client on another computer running Solaris 11. I would like to know, how do I specify a network address for a dhcp client such that its generated ip address is within a specific subnet. For example: The DHCP server host = 172.1.1.1 So I want the client machine to have an IP Address in the range of 172.1.1.1 255.255.255.0. Please help me.

  Read the article

• Apache: Assign SSL server / client certs to directories

  - by Daniel Amaya

  I have multiple directories on my system, e.g., /var/www/dir1 /var/www/dir2 /var/www/dir3 And what I'd like to do is to generate a server/client SSL certificate for each directory, and then set up each directory such that the client cert must match the server cert in order to access said directory. Now, if someone has the client cert for /var/www/dir2 and they try to access /var/www/dir1, they will be unable to do so since those directories use different certs. Each of these directories is hosted on the same domain (i.e., domain.com/dir1, domain.com/dir2). Now, the problem I am having is that I am not exactly sure how to accomplish this in Apache. (Also, I don't really care for domain.com to require SSL, but I do want the directories to require it.)

  Read the article

• Google Drive desktop client not updating existing files from other users

  - by cqm

  I've looked around and there doesn't really seem to be any troubleshooting information for the Google Drive desktop client. It all assumes you are using Google Docs on the web. Anyway, my team is trying to use Google Drive like Dropbox, where multiple people are editing files shared amongst them through the desktop, such as images. Dropbox is really good at noticing when a checksum for a file is changed, and syncing it. Google Drive's desktop client seems not to do this at all. Google Drive desktop client seems to only sync newly created files and not giving any notification at all that there is a modified version, it will never sync it, even though going online and opening that file will show the modified version. Is there any way to fix this? and the answer has nothing to do with proxy or firewall configurations. Team is using computers running OSX and Windows.

  Read the article

• Windows 2003 - RAS service - VPN client can only connect to server, not internal network

  - by Gk

  Here is my diagram http://imageshack.us/photo/my-images/263/vpnt.png/ Server has two NIC: One connect to Internet, one connect to internal network. RAS service is configured with static IP pool on the same subnet of internal network (10.10.0.x). The problem is when a client connect to server, client can connect to server(10.10.0.10), but cannot connect to another host locate in internal network (10.10.0.11) even cannot ping to 10.10.0.50. RAS configured with IP routing enabled, client connect with options: Use default gateway on remote network. I'm messed up and can not figure out what wrong. Please help me T_T. TIA, giobuon

  Read the article

• Revert a VM client from within the VM Client - is it possible?

  - by Saariko

  I am creating a test VM client for our QA department. Once it's installed, my options will be: Use a snapshot Use non persistent disk on the hard disk. For either options, I can give the role of QA_DEP the ability to log to vCenter and go back/power-off the client - so they can return to their clean machine. My question: is it possible to have that ability without using vCenter? What If I want that on a Client reboot - it will return to it's initial/clean state? The clients are not gonna be heavy loaded.

  Read the article

• Authentication error in LTSP client

  - by sat

  I am building a LTSP server with LDAP authentication for LTSP Clients. I have configured LDAP server also. When I try to login from LTSP client in GUI, I am getting No response from server, restarting. Then, It's restarting the GUI and comes to the login screen again. I thought that there could be a problem with LDAP authentication. But, When I try to login from Alt+Ctrl+F1 terminal in LTSP client, it is logged in successfully with LDAP user. LDAP Server and authentication is working fine. Even, after executing the below commands, still I am getting the same error. ltsp-update-sshkeys ltsp-update-kernels ltsp-update-image --arch i386 Whether I need to configure anything for GUI login from LTSP Client? How to fix this issue?

  Read the article

• Simple way to get keys/mouse buttons working in Synergy (mac client, pc server)

  - by Damon

  I'm trying to get Synergy working running as client on my Mac with SynergyKM Preferences panel. It's performing generally fine (just some real slow downs when my network is under heavy use, usually from youtube videos). The main thing I want to get working is none of the special buttons on my mouse are working on the client.. just the scroll and middle click.. but I have back/forward buttons I'd like to have working. Also my Windows Comfort Curve Keyboard has some extra keys and I'd like to know how to set those up to perform operations on my Mac client. I could have sworn that home/end weren't working but they seem to be now.. perhaps it's application specific..

  Read the article

• Looking for KVM switch (over IP) with good linux client [closed]

  - by B14D3

  I have some ATEN CN6000 and i1708 KVM boxes and clients for them are made for windows and java. Java clients doesnt work neither on win or linux systems(I can run them with JavaRE but they dont connect to KVM box). Client for CN6000 on windows works quite well but a have huge problems with connect to i1708 with win client. So I'm looking for some good replacement. I'm aiming to KVM with linux client. Whether there are such ? What kind of KVMs you are using and have good opinion about them?

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >